2 files changed, 0 insertions, 554 deletions

diff --git a/heimdall-frontend/doc-pak/LICENSE b/heimdall-frontend/doc-pak/LICENSE
deleted file mode 100644
index 680dad9..0000000
--- a/heimdall-frontend/doc-pak/LICENSE
+++ /dev/null
@@ -1,19 +0,0 @@
-Copyright (c) 2010-2012 Benjamin Dobell, Glass Echidna
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-THE SOFTWARE.
diff --git a/heimdall-frontend/doc-pak/README b/heimdall-frontend/doc-pak/README
deleted file mode 100644
index a181796..0000000
--- a/heimdall-frontend/doc-pak/README
+++ /dev/null
@@ -1,535 +0,0 @@
-Heimdall (c) 2010-2012 Benjamin Dobell, Glass Echidna

-http://www.glassechidna.com.au/products/heimdall/

-

-DISCLAIMER:

-

-    This software attempts to flash your Galaxy S device. The very nature of

-    flashing is dangerous. As with all flashing software, Heimdall has the

-    potential to damage (brick) your device if not used carefully. If you're

-    concerned, don't use this software. Flashing ROMs onto your phone may also

-    void your warranty. Benjamin Dobell and Glass Echidna are not responsible

-    for the result of your actions.

-

-

-These instructions are for Linux operating systems.

-

-

-Flashing Heimdall Firmware Package with Heimdall Frontend:

-

-    As of Heimdall Frontend 1.3 there are now two main ways to flash a ROM from

-    Heimdall Frontend. The simpler and preferred option is to download a

-    Heimdall Firmware Package and follow the following steps.

-

-

-    1. Fully charge your device (use the wall charger as it's faster).

-

-    2. Open the a terminal and run Heimdall Frontend by typing:

-

-            heimdall-frontend

-

-    3. From the "Load Package" tab, under the "Heimdall Firmware Package"

-       section click the "Browse" button.

-

-    4. Use the dialogue that appears to navigate to, and select, the Heimdall

-       firmware package that you wish to flash.

-

-    5. You will see progress bars appear as the package is decompressed and

-       extracted.

-

-       When the package has finished being decompressed you should see

-       information about the particular firmware package that has been

-       selected.

-

-    6. Verify that your device is listed under "Supported Devices". If it's not

-       then STOP immediately! DO NOT flash this firmware to your device!

-       Instead search for an appropriate firmware package for your device.

-

-       If you believe there is a mistake and your device is actually

-       supported please get in contact with the firmware developer (not Glass

-       Echidna!) and ask them to rectify the issue. If the developer provided

-       a URL you may be able to contact them by pressing the "Homepage" button.

-

-    7. If you've verified your device is supported you may continue to press

-       the "Load / Customise" button.

-

-    8. You should now be looking at the "Flash" tab. If not verify that you did

-       in fact push the "Load / Customise" button.

-

-       Generally, you won't NEED or WANT to customise a firmware package! In

-       which case you can safely move on to step 9.

-

-       Nonetheless, the "Flash" tab provides you with a means to customise the

-       firmware package before flashing it to your device. See "Performing a

-       Custom Flash with Heimdall Frontend" for more details.

-

-    9. Put your Galaxy S device into download mode and plug it in to your PC.

-

-       Download mode can be accessed several different ways depending on your

-       particular device model. If you're unsure how to do this please search

-       online for the appropriate method.

-

-   10. Press the "Start" button.

-

-   11. Heimdall Frontend will display the progress and inform you when the

-       flash is complete.

-

-       If something went wrong i.e. your device wasn't detected because it

-       wasn't in download mode, then the status section will let you know the

-       cause of the problem.

-

-

-

-Performing a Custom Flash with Heimdall Frontend:

-

-    This is the advanced means of flashing firmware to your device.

-

-    If you're not an advanced user or a developer, in the event that a Heimdall

-    Firmware Package doesn't exist for the particular firmware (or files) that
-    you wish to flash, then I strongly recommend you get in touch with the
-    developer of the firmware (or files) and politely ask them to create a
-    Heimdall Firmware Package for you. In doing so, you avoid the risk of
-    making mistakes due to inexperience.
-

-

-    If you're looking to customise an existing Heimdall Firmware Package then

-    follow steps 1-8 of "Flashing Heimdall Firmware Package with Heimdall

-    Frontend" then start from below with step 5.

-

-

-    1. Fully charge your device (use the wall charger as it's faster).

-

-    2. Download a decrypted Samsung Galaxy S ROM or a Heimdall Firmware Package

-       and extract everything to the one directory.

-

-    3. If the ROM is not a Heimdall Firmware Package it may instead be provided

-       as multiple archives (nested or otherwise), extract them all to the same

-       location.

-

-       NOTE: If you want to use the CSC then extract it last. If you're asked

-             to overwrite files then do so.

-

-    3. Open the a terminal and run Heimdall Frontend by typing:

-

-            heimdall-frontend

-

-    4. Select the "Flash" tab. From the "Flash" tab you're able to completely

-       customise a flash. 

-

-    5. Before you can chose which partitions you want to flash with particular

-       files you MUST first select a PIT file. To do this click the "Browse"

-       button in the "PIT" section. This will open a dialogue allowing you to

-       navigate to and select a valid PIT (.pit) file.
-

-       If you do not already have a valid PIT file stored on your computer you
-       can download your device's PIT file from the "Utilities" tab.
-
-    6. If a valid PIT file has been selected then the "Add" button below the
-       "Partitions (Files)" list-box will be enabled. Press this button to add
-       a partition to your flash.
-

-    7. When you first add a partition you will see the "Partition Name" and

-       "Partition ID" be populated with information. Use the "Partition Name"

-       drop down to select which partition you wish to flash. "Partition ID"

-       will automatically update and is never directly editable.

-

-    8. You must then select a file to flash to the partition that you just

-       specified using the "Browse" button under the "File / Partition". You

-       will not be able to flash, create a firmware package or add another

-       partition until you have selected a file. However, you're still able to

-       press the "Remove" button if you've decided not to flash the partition

-       you've just specified.

-

-    9. When you've specified a file name then you'll be able to see the updated

-       information in the partition list to the right. You can select any

-       partition from this list and customise it as you see fit.

-

-       You can also remove a partition from the list by selecting it and

-       clicking the "Remove" button. Removing a partition from the list doesn't

-       remove it from your device, it simply means it will not be flashed.

-

-   10. Repeat steps 7-9 as often as needed to specify all the partions/files

-       that you wish to flash.

-

-   11. Now you can chose whether you would like to repartition your device as

-       well as whether you would like to prevent the device rebooting once a

-       flash has been completed. These options can be enabled or disabled by

-       toggling the "Repartition" and "No Reboot" check-boxes.

-

-       In the general case you will only need to enable repartition if you wish

-       to change the PIT file on your device. Keep in mind that repartitioning

-       will wipe your device!

-

-       The "No Reboot" option is rarely required. It's mostly in place so you

-       can manually boot straight into recovery mode after a flash (rather than

-       booting up normally).

-

-   12. If you've added at least one partition to your flash (and selected a

-       file for that partition) then the "Start" button will be enabled. Press

-       the "Start" button to begin the flashing process.

-

-       You may notice that the "Create Package" tab becomes available at the

-       whenever the "Start" button becomes available. From this tab you're able

-       to create a reusable, redistributable Heimdall Firmware Package with the

-       files and partitions you just selected. See "How to Create a Heimdall

-       Firmware Package" for details.

-

-   13. Heimdall Frontend will display the progress and inform you when the

-       flash is complete.

-

-       If something went wrong i.e. your device wasn't detected because it

-       wasn't in download mode, then the status section will let you know the

-       cause of the problem.

-

-

-

-Flashing Firmware from Command Line:

-	

-    1. Fully charge your phone (use the wall charger as it's faster).

-

-    2. Download a decrypted Samsung Galaxy S ROM or a Heimdall Firmware Package

-       and extract everything to the one directory.

-

-    3. If the ROM is not a Heimdall Firmware Package it may instead be provided

-       as multiple archives (nested or otherwise), extract them all to the same

-       location.

-

-       NOTE: If you want to use the CSC then extract it last.

-

-    4. Put your Galaxy S device into download mode and plug it in..

-

-    5. Open a terminal and navigate to the directory where you extracted

-       the ROM/firmware files.

-

-    6. Type the following to list all the functionality Heimdall supports:

-

-            heimdall help

-

-    7. Use the instructions to manually enter a command with all the files you

-       want to flash.

-

-       Here is an example that does a full flash and repartition on a GT-I9000:

-		

-            heimdall flash --repartition --pit s1_odin_20100512.pit --factoryfs factoryfs.rfs --cache cache.rfs --dbdata dbdata.rfs --primary-boot boot.bin --secondary-boot Sbl.bin --param param.lfs --kernel zImage --modem modem.bin

-

-

-    8. Heimdall will display the progress as it flashes so that you know things

-       are working as they should.

-

-

-

-How to Create a Heimdall Firmware Package:

-

-    Firstly, Heimdall's firmware package format is just a regular TAR archive

-    compressed with gzip. The only two real requirements are that a valid

-    firmware.xml must be included (refer to Appendix A) and you can only

-    include files (no directories, links etc.) As such if you'd like there is

-    nothing preventing you from creating Heimdall packages manually. Of course

-    Heimdall Frontend provides a simple user interface that takes care of all

-    the hard work for you.

-

-    There are two ways in which you can create a firmware package. You can

-    create a package from scratch, or you can load an existing package, apply

-    modifications and then save the package. Creating a package from scratch

-    is the preferred approach, by taking this approach you're far less likely

-    to run into file name length limitations.

-

-    Before you can access Heimdall Frontend's firmware creation functionality

-    (available from the "Create Package" tab) you must first specify which

-    files will be included in your package, as well as a few flashing options

-    i.e. Whether or not users should repartition when flashing. This

-    information must be filled out from the "Flash" tab in exactly the same

-    fashion you would provide information to flash your device (see "Performing

-    a Custom Flash with Heimdall Frontend"). As mentioned above, it's not the

-    preferred means, but you're able to load an existing package as a starting

-    point for this information.

-

-    Once you've specified the files/partitions you wish to include in your

-    firmware package the "Create Package" tab will become available. Clicking

-    this tab will display additional information that you can include in your

-    package. In order to continue you must fill out all sections except for the

-    URLs section, which is optional. The following is a break-down of what all

-    these options mean.

-

-    - General Firmware Information: -

-

-        Firmware Name - This is the name of your particular firmware. An

-            example would be "Cyanogenmod".

-

-        Firmware Version - This is the version identifier for your package. Any
-            valid string will be accepted, although the inclusion of decimal
-            point version number is preferred i.e. "7.1". If it makes sense
-            then feel free to append a text string like "RC1" or "Beta 1" to
-            the decimal point version.
-

-        Platform Name - This is the name of platform (or operating system) that

-            your firmware is based on. In most cases this will simply be

-            "Android".

-

-        Platform Version - This is the operating system version that your

-            firmware is based on. Again decimal point version numbers are

-            preferred over text, i.e. "2.3.4" is preferred over "Gingerbread".

-

-

-    - Developers -

-

-    URLs (Optional):

-

-        Homepage - Here you can enter your personal URL or a URL particularly

-            pertaining to the firmware being packaged. The URL must be well

-            formed for it to work. An example of a well formed URL is

-            "http://www.glassechidna.com.au/products/heimdall/". It is

-            important to include "http://" in order to specify the protocol as

-            other protocols such as "ftp://" are equally valid although

-            unlikely to be used.

-

-        Donate - Here you can enter a URL that will link users to a page to

-            make donations for the effort you've put into developing your

-            firmware. Once again the URL must be well formed but there is no

-            requirement on how your donation page should work. For instance

-            both "http://www.glassechidna.com.au/donate/" and

-            "http://forum.xda-developers.com/donatetome.php?u=2710388" are

-            equally valid.

-

-    Developer Info:

-

-        Name - Here you can enter in the name of individual team members or a

-            team name. Click "Add" and the developer will be added to the list

-            on the right. If you make a mistake you can select a developer from

-            the list and click "Remove". You can list as many developers as you

-            like, however visual constraints of the "Load Package" tab means
-            only a few names will be visible. Where possible you may want to
-            opt for team names over listing individual team members.

-

-

-    - Supported Devices -

-

-    This section allows you to create a list of devices that are supported by

-    your particular firmware. Although Heimdall isn't capable of enforcing this

-    we strongly recommend you take this section seriously. If filled out

-    correctly you could help save a number of accidental bricks!

-

-    Device Info:

-

-        Manufacturer - This is where you can enter the name of the manufacturer

-            for a particular device. For now this will most likely be

-            "Samsung".

-

-        Name - This is the human readable name for a particular device.

-            "Galaxy S", "Galaxy S II", "Droid Charge", "Vibrant" and

-            "Galaxy S (Telstra)" are all valid names. There are a lot of

-            possible variations here so be as specific as you think is

-            necessary.

-

-        Product Code - This is by far the most important bit of device

-            information. Device names tend to be region specific and further

-            subject to the whims of telecommunication companies and resellers.

-            Product Codes (or product IDs) are designated by manufacturers and

-            are generally the definitive means of referring to a particular

-            device. Examples are "GT-I9000", "GT-I9100" and "SCH-I897". If

-            you're unsure of a particular product code then both Google and

-            GSMArena are your friends!

-

-

-    After filling out all the necessary information the "Build" button will be

-    enabled. If it's still disabled then you know you're missing some required

-    information. In particular you must specify at least one developer and at

-    least one supported device. Pressing the "Build" button will bring up a

-    save dialogue where you must chose a file name for your particular package.

-    Don't worry about specifying the ".tar.gz" extension Heimdall Frontend will

-    take care of this automatically.

-

-    Once you've chosen a file name Heimdall Frontend will begin the process of

-    building the firmware package. In doing so a valid firmware.xml file will

-    be generated from the information entered. All files will be archived in a

-    single TAR file then the TAR archive will be compressed via gzip

-    compression. Compression will take a little while but you will see progress

-    bars so you know the application hasn't hung. When the progress bars

-    disappear you're finished making your package.

-

-    Congratulations! You're now ready to redistribute your firmware package

-    online or by any means you see fit.

-

-

-

-Appendix A - firmware.xml

-

-The following details a part of the Heimdall Firmware Package format. This

-is only relevant to developers or advanced users who wish to create Heimdall

-Firmware Packages outside of Heimdall Frontend or in some way integrate support

-for the format in their own software.

-

-

-All Heimdall Firmware Packages must contain a file called firmware.xml. This

-file stores flash information and meta-data for the package as well as
-information about other files contained within the package.
-

-

-The format is fairly straight-forward so it won't be explained in great detail.

-Nonetheless the following is an example of a valid firmware.xml file.

-

-<?xml version="1.0" encoding="UTF-8"?>

-<firmware version="1">

-	<name>Test Firmware</name>

-	<version>1.1</version>

-	<platform>

-		<name>Android</name>

-		<version>2.3.4</version>

-	</platform>

-	<developers>

-		<name>Benjamin Dobell</name>

-		<name>Hedonism Bot</name>

-	</developers>

-	<url>http://www.glassechidna.com.au/</url>

-	<donateurl>http://www.glassechidna.com.au/donate/</donateurl>

-	<devices>

-		<device>

-			<manufacturer>Samsung</manufacturer>

-			<product>GT-I9000</product>

-			<name>Galaxy S</name>

-		</device>

-		<device>

-			<manufacturer>Samsung</manufacturer>

-			<product>GT-I9000T</product>

-			<name>Galaxy S (Telstra)</name>

-		</device>

-		<device>

-			<manufacturer>Samsung</manufacturer>

-			<product>GT-I9000M</product>

-			<name>Vibrant</name>

-		</device>

-	</devices>

-	<pit>Nl3276-I9000 s1_odin_20100512.pit</pit>

-	<repartition>0</repartition>

-	<noreboot>0</noreboot>

-	<files>

-		<file>

-			<id>0</id>

-			<filename>gq3276-boot.bin</filename>

-		</file>

-		<file>

-			<id>24</id>

-			<filename>Uh3276-cache.rfs</filename>

-		</file>

-		<file>

-			<id>22</id>

-			<filename>em3276-factoryfs.rfs</filename>

-		</file>

-		<file>

-			<id>11</id>

-			<filename>fl3276-modem.bin</filename>

-		</file>

-		<file>

-			<id>21</id>

-			<filename>Xd3276-param.lfs</filename>

-		</file>

-		<file>

-			<id>3</id>

-			<filename>if3276-Sbl.bin</filename>

-		</file>

-		<file>

-			<id>6</id>

-			<filename>cr3276-zImage</filename>

-		</file>

-	</files>

-</firmware>

-

-

-New lines need not be included and the order in which elements are specified

-does not need to match that of the above example.

-

-One and only one <firmware> element must be included. The <firmware> element

-must also have a version attribute specified. The version must be parsable as

-an integer and indicates what version of the Heimdall Firmware Package

-specification the package adheres to.

-

-All data is stored as strings, however a <file>'s <id> element must be parsable

-as an integer. The <id> value represents the partition ID (according to the

-specified PIT file) that the file should be flashed to.

-

-A <firmware>'s <repartition> and <noreboot> elements must also be parsable as

-an integer. However, as they represent boolean values, a value of zero ("0")

-means false (or disabled) where as a non-zero value (typically "1") means true

-(or enabled).

-

-File names are specified relative to the TAR archive in which firmware.xml and

-all other files are to be stored. Heimdall Firmware Packages do not support

-directories or links, as such file names should only be a name and not a path.

-

-<url> and <donateurl> are the only optional elements, all other elements must

-be included.

-

-

-

-Appendix B - Installing Heimdall from Source:

-

-    1. First make sure you have installed build-tools, pkgconfig, zlib-dev and
-       libusb-1.0-dev (v1.0.8 or newer).
-
-       NOTE: Package names may not be absolutely identical to those above.

-

-    2. Open a terminal and navigate to the directory you downloaded,

-       or extracted, Heimdall to.

-

-    3. Enter the following commands to compile libpit:

-

-            cd libpit

-            ./configure
-            make
-            cd ..

-

-       If you have problems please consult http://www.libusb.org/

-

-    4. Enter the following commands to compile libpit.

-

-            cd libusb-1.0

-            ./configure

-            make

-            cd ..

-

-       NOTE: There is no need to run "sudo make install".

-

-    4. Enter the following commands to compile and install Heimdall:

-

-            cd heimdall

-            ./configure

-            make

-            sudo make install

-            cd ..

-

-       NOTE: As an alternative to "sudo make install" you may chose to generate
-             a package by typing the following:
-
-                sudo checkinstall --pkgversion <version>
-
-             Where <version> is the current Heimdall release e.g. 1.3.0

-

-    5. Done

-

-

-

-Appendix C - Installing Heimdall Frontend from Source:

-

-    1. Compile and install Heimdall, see Appendix B.

-

-    2. First make sure you have installed Qt 4.7 or later, available from:

-

-          http://qt.nokia.com/downloads/

-

-    3. Open a terminal and navigate to the directory you extracted Heimdall to.

-

-    4. Enter the following commands to compile and install Heimdall Frontend:

-

-            cd heimdall-frontend

-            qmake-qt4 heimdall-frontend.pro

-            make

-            sudo make install
-

-       NOTE: As an alternative to "sudo make install" you may chose to generate

-             a package by typing the following:

-

-                sudo checkinstall --pkgversion <version>

-

-             Where <version> is the current Heimdall release e.g. 1.3.0

-

-    5. Done

-