From 07dcba54fc8cc5b7c6515305aa233e24a58adc94 Mon Sep 17 00:00:00 2001 From: Benjamin Dobell Date: Mon, 13 May 2013 00:08:30 +1000 Subject: Update copyright notices, version identifier and documentation for 1.4.0 release. --- Win32/README.txt | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) (limited to 'Win32') diff --git a/Win32/README.txt b/Win32/README.txt index ee4063a..6480258 100644 --- a/Win32/README.txt +++ b/Win32/README.txt @@ -1,4 +1,4 @@ -Heimdall (c) 2010-2011 Benjamin Dobell, Glass Echidna +Heimdall (c) 2010-2013 Benjamin Dobell, Glass Echidna http://www.glassechidna.com.au/products/heimdall/ DISCLAIMER: @@ -32,7 +32,7 @@ Troubleshooting: Driver Installation Instructions: - 1. Put your Samsung Galaxy S into download mode and plug it in. + 1. Put your device into download mode and plug it in. 2. Run zadig.exe included in the Drivers subdirectory. @@ -50,7 +50,7 @@ Driver Installation Instructions: Driver Uninstallation Instructions: - 1. Put your Samsung Galaxy S into download mode by holding Volume Down + Home + Power. + 1. Put your device into download mode by holding Volume Down + Home + Power. 2. Plug your phone into your PC. @@ -151,7 +151,7 @@ Performing a Custom Flash with Heimdall Frontend: 1. Fully charge your device (use the wall charger as it's faster). - 2. Download a decrypted Samsung Galaxy S ROM or a Heimdall Firmware Package + 2. Download a decrypted device ROM or a Heimdall Firmware Package and extract everything to the one directory. 3. If the ROM is not a Heimdall Firmware Package it may instead be provided @@ -236,7 +236,7 @@ Flashing Firmware from Command Line: 1. Fully charge your phone (use the wall charger as it's faster). - 2. Download a decrypted Samsung Galaxy S ROM or a Heimdall Firmware Package + 2. Download a decrypted device ROM or a Heimdall Firmware Package and extract everything to the one directory. 3. If the ROM is not a Heimdall Firmware Package it may instead be provided @@ -258,17 +258,30 @@ Flashing Firmware from Command Line: heimdall help - 7. Use the instructions to manually enter a command with all the files you - want to flash. + 7. Before flashing, you must first know the names of the partitions you + wish to flash. These can be obtained by executing: + + heimdall print-pit --no-reboot + + The inclusion of --no-reboot ensures the phone will not reboot after PIT + file has been downloaded and displayed. After executing a command with + the --no-reboot argument, the next command should include the --resume + argument. + + NOTE: You can still safely reboot your phone manually (with the power + button) after executing --no-reboot commands. + + 8. Use the help and print-pit output to construct a command with all the + file you want to flash. Here is an example that does a full flash and repartition on a GT-I9000: - heimdall flash --repartition --pit s1_odin_20100512.pit --factoryfs factoryfs.rfs --cache cache.rfs --dbdata dbdata.rfs --primary-boot boot.bin --secondary-boot Sbl.bin --param param.lfs --kernel zImage --modem modem.bin + heimdall flash --repartition --resume --pit s1_odin_20100512.pit --FACTORYFS factoryfs.rfs --CACHE cache.rfs --DBDATA dbdata.rfs --IBL+PBL boot.bin --SBL Sbl.bin --PARAM param.lfs --KERNEL zImage --MODEM modem.bin NOTE: The above command assumes the files specified are installed in the same directory as Heimdall. - 8. Heimdall will display the progress as it flashes so that you know things + 9. Heimdall will display the progress as it flashes so that you know things are working as they should. -- cgit v1.2.3