diff options
author | Adam <you@example.com> | 2020-05-17 05:51:50 +0200 |
---|---|---|
committer | Adam <you@example.com> | 2020-05-17 05:51:50 +0200 |
commit | e611b132f9b8abe35b362e5870b74bce94a1e58e (patch) | |
tree | a5781d2ec0e085eeca33cf350cf878f2efea6fe5 /private/ntos/ndis/htdsu/oemsetnt.inf | |
download | NT4.0-e611b132f9b8abe35b362e5870b74bce94a1e58e.tar NT4.0-e611b132f9b8abe35b362e5870b74bce94a1e58e.tar.gz NT4.0-e611b132f9b8abe35b362e5870b74bce94a1e58e.tar.bz2 NT4.0-e611b132f9b8abe35b362e5870b74bce94a1e58e.tar.lz NT4.0-e611b132f9b8abe35b362e5870b74bce94a1e58e.tar.xz NT4.0-e611b132f9b8abe35b362e5870b74bce94a1e58e.tar.zst NT4.0-e611b132f9b8abe35b362e5870b74bce94a1e58e.zip |
Diffstat (limited to '')
-rw-r--r-- | private/ntos/ndis/htdsu/oemsetnt.inf | 1241 |
1 files changed, 1241 insertions, 0 deletions
diff --git a/private/ntos/ndis/htdsu/oemsetnt.inf b/private/ntos/ndis/htdsu/oemsetnt.inf new file mode 100644 index 000000000..6b3a7882e --- /dev/null +++ b/private/ntos/ndis/htdsu/oemsetnt.inf @@ -0,0 +1,1241 @@ +;*********************************************************************** +; HT Communications DSU41/42 56kbps Digital Modem WindowsNT Setup File. +;*********************************************************************** +[Identification] + OptionType = NetAdapter + +;*********************************************************************** +; +;*********************************************************************** +[PlatformsSupported] + ISA + EISA + "Jazz-Internal Bus" + +;*********************************************************************** +; +;*********************************************************************** +[Options] + HTDSU41 +; HTDSU42 FIXME - The HTDSU42 does not yet support HDLC framing + +;*********************************************************************** +; +;*********************************************************************** +[FileConstants] + InfName = "OEMHTDSU.INF" + UtilityInf = "UTILITY.INF" + ParamInf = "NCPARAM.INF" + subroutineinf = "SUBROUTN.INF" + SoftwareType = "driver" + Exit_Code = 0 + NetEventDLL = "%SystemRoot%\System32\netevent.dll" + IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" + Manufacturer = "HT Communications" + ProductMajorVersion = "3" + ProductMinorVersion = "1" + ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) + ProductSoftwareName = "HTDSU41" + ProductSoftwareImagePath = "\SystemRoot\System32\drivers\HTDSU41.sys" + NetRuleSoftwareType = "HTDSU41Sys HTDSU41Driver" + NetRuleSoftwareUse = $(SoftwareType) + NetRuleSoftwareBindForm = """HTDSU41Sys"" yes no container" + NetRuleSoftwareClass = {"HTDSU41Driver basic"} + NetRuleSoftwareBindable = {"HTDSU41Driver HTDSU41Adapter non exclusive 100"} + ProductHardwareName = "HTDSU41" + NetRuleHardwareBindForm = " yes yes container" + NetRuleHardwareHTDSU41Type = "HTDSU41 HTDSU41Adapter" + NetRuleHardwareHTDSU41Class = {"HTDSU41Adapter basic"} + BindableHTDSU41Txt = {"HTDSU41Driver HTDSU41Adapter non exclusive 100"} + DeviceMap = "HARDWARE\DEVICEMAP" + TapiDevices = "TAPI DEVICES" + TapiDeviceKey = $(ProductHardwareName) + TapiMediaType = "Sw56_" + ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"+ + $(ProductSoftwareName)"\CurrentVersion" + ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)+ + "\Parameters" + +; FIXME - default to dialup line mode = 0 -- leased line = 1 +; In dialup mode we need to write the parameters so RAS/TAPI will bind to us +; In leased mode we need to write the parameters so NDIS/WAN will bind to us +; Right now this file only supports dialup mode - leased line changes are needed + LineType = 0 + +; FIXME - Set to zero before release + DebugFlags = 0 + + RAM_Addr_List = {851968, 917504, 913408, 847872} + IRQ_List = {15, 12, 11, 10, 4, 3} + +; Default here is 1=57.6kbps 0=max 2=38.4k 3=19.2k 4=9.6k + Rate_Strings = {"Max kbps", "57.6 kbps", "38.4 kbps", "19.2 kpbs", "9.6 kbps"} + Line_Rates = {0, 1, 2, 3, 4} + LineRate = 0 + +;*********************************************************************** +; +;*********************************************************************** +[GeneralConstants] + from = "" + to = "" + ExitCodeOk = 0 + ExitCodeCancel = 1 + ExitCodeFatal = 2 + KeyNull = "" + MAXIMUM_ALLOWED = 33554432 + RegistryErrorIndex = NO_ERROR + KeyProduct = "" + KeyParameters = "" + TRUE = 1 + FALSE = 0 + NoTitle = 0 + ExitState = "Active" + OldVersionExisted = $(FALSE) + DriverPath = $(!STF_NTPATH)\drivers + +;*********************************************************************** +; +;*********************************************************************** +[Date] + Now = {} ? $(!LIBHANDLE) GetSystemDate + +;*********************************************************************** +; +;*********************************************************************** +[Identify] + Read-Syms Identification + Set Status = STATUS_SUCCESSFUL + Set Identifier = $(OptionType) + Set Media = #("Source Media Descriptions", 1, 1) + Return $(Status) $(Identifier) $(Media) + +;*********************************************************************** +; +;*********************************************************************** +[ReturnOptions] + Set Status = STATUS_FAILED + Set OptionList = {} + Set OptionTextList = {} + Set LanguageList = ^(LanguagesSupported, 1) + + IfContains(i) $($0) in $(LanguageList) + IfStr(i) $($1) == "" + GoTo SetOptions + EndIf + Set PlatformList = ^(PlatformsSupported, 1) + IfContains(i) $($1) in $(PlatformList) + GoTo SetOptions + Else + Set Status = STATUS_NOTSUPPORTED + GoTo ExitReturnOptions + EndIf + Else + Set Status = STATUS_NOLANGUAGE + GoTo ExitReturnOptions + EndIf + +SetOptions = + + Set OptionList = ^(Options, 1) + Set OptionTextList = ^(OptionsText$($0), 1) + Set Status = STATUS_SUCCESSFUL + +ExitReturnOptions = + + Return $(Status) $(OptionList) $(OptionTextList) + +;*********************************************************************** +; +;*********************************************************************** +[InstallOption] + Set Status = STATUS_FAILED + Set Option = $($1) + Set SrcDir = $($2) + Set RasDir = $($2) + Set AddCopy = $($3) + Set DoCopy = $($4) + Set DoConfig = $($5) + Set LanguageList = ^(LanguagesSupported, 1) + + IfContains(i) $($0) NOT-IN $(LanguageList) + Return STATUS_NOLANGUAGE + EndIf + ; + ; FIXME - make sure this flag is disabled before shipping + ; + Set OldDebugControl = $(!DebugOutputControl) +; Set !DebugOutputControl = 1 + + Set-Subst LF = "\n" + + Read-Syms GeneralConstants + Read-Syms FileConstants + Read-Syms DialogConstants$(!STF_LANGUAGE) + + IfStr(i) $(!NTN_Origination) == "NCPA" + Set Continue = $(OK) + EndIf + + Read-Syms FileConstants$(!STF_LANGUAGE) + Detect Date + Set-Title $(FunctionTitle)$(Option) + + Set to = Begin + Set from = Begin + Set CommonStatus = STATUS_SUCCESSFUL + + EndWait + +;*********************************************************************** +; +;*********************************************************************** +Begin = + + Set ActivateDetection = FALSE + IfStr(i) $(!NTN_InstallMode) == deinstall + Set StartLabel = RemoveAdapter + Else-IfStr(i) $(!NTN_InstallMode) == Update + Set StartLabel = UpgradeSoftware + Else-IfStr(i) $(!NTN_InstallMode) == bind + Set StartLabel = BindingAdapter + Else-IfStr(i) $(!NTN_InstallMode) == configure + Set StartLabel = ConfigureAdapter + Set ActivateDetection = TRUE + Set CommonStatus = STATUS_REBOOT + IfStr(i) $(ProductKeyName) == $(!NTN_RegBase) + Debug-Output $(InfName)": Cannot configure the EtherWORKS 3 driver software." + Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error: cannot get an error string." + GoTo ShellCodeError + EndIf + Set Error = $($R0) + Set from = end + Set to = end + GoTo NonFatalInfo + EndIf + Else + Set StartLabel = InstallAdapter + Set ActivateDetection = TRUE + Set OEM_ABANDON_OPTIONS = {} + Set OEM_ABANDON_SOFTWARE = FALSE + Set OEM_ABANDON_ON = TRUE + EndIf + + Debug-Output $(InfName)": ==================================================" + Debug-Output $(InfName)": STF_CWDIR is: "$(!STF_CWDIR) + Debug-Output $(InfName)": STF_LANGUAGE is: "$(!STF_LANGUAGE) + Debug-Output $(InfName)": Option is: "$(Option) + Debug-Output $(InfName)": !STF_NCDETECT is: "$(!STF_NCDETECT) + Debug-Output $(InfName)": !STF_NCOPTION is: "$(!STF_NCOPTION) + Debug-Output $(InfName)": !STF_NCDETCARD is: "$(!STF_NCDETCARD) + Debug-Output $(InfName)": !STF_NCDETINFO is: "$(!STF_NCDETINFO) + Debug-Output $(InfName)": ==================================================" + + Set DetectedCard = FALSE + IfStr(i) $(ActivateDetection) != TRUE + GoTo $(StartLabel) + EndIf + + Debug-Output $(InfName)": Calling Param_SetDefaults" + Shell $(ParamInf) Param_SetDefaults {} + + Shell $(ParamInf) HexListFromDecList $(RAM_Addr_List) + Set RAM_Hex_List = $($R0) + + IfStr(i) $(!STF_NCDETECT) == YES + IfStr(i) $(!STF_NCOPTION) == $(Option) + Set DetectedCard = TRUE + Debug-Output $(InfName)": Setting DetectedCard to TRUE" + EndIf + EndIf + + Shell "" DebugConfiguration "After parameter querying" + Set from = FatalError + Set to = FatalError + GoTo $(StartLabel) + +;*********************************************************************** +; +;*********************************************************************** +InstallAdapter = + + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct + IfStr $(KeyProduct) != $(KeyNull) + CloseRegKey $(KeyProduct) + IfStr(i) !(NTN_RegBase) == $(ProductKeyName) + Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ + $(ProductVersion) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error: cannot get an error string." + GoTo ShellCodeError + EndIf + GoTo end + Else + Shell $(UtilityInf), CardExistedDlg + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error: cannot get an error string." + GoTo ShellCodeError + EndIf + IfStr(i) $($R1) != "OK" + Set CommonStatus = STATUS_USERCANCEL + GoTo end + EndIf + Set OldVersionExisted = $(TRUE) + EndIf + EndIf + + Set CurrParamSettings = {} + IfStr(i) $(DetectedCard) != TRUE + GoTo AdapterSetup + EndIf + + StartWait + Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD) + EndWait + + IfStr(i) $($R0) != STATUS_SUCCESSFUL + GoTo AdapterSetup + EndIf + + Set DetectedParams = $($R1) + Debug-Output $(InfName)": Calling Param_SetDefaults to merge detected params" + Shell $(ParamInf) Param_SetDefaults $(DetectedParams) + GoTo AdapterSetup + +;*********************************************************************** +; +;*********************************************************************** +ConfigureAdapter = + + IfStr $(KeyProduct) == $(KeyNull) + OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct + IfStr $(KeyProduct) == $(KeyNull) + Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE + Debug-Output $(InfName)": Cannot find component product key" + GoTo FatalRegistry + EndIf + EndIf + + Debug-Output $(InfName)": Shelling to FindService" + Shell $(UtilityInf) FindService, $(KeyProduct) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": FindService shell failure" + GoTo ShellCodeError + EndIf + IfStr(i) $($R0) != NO_ERROR + Debug-Output $(InfName)": FindService Shell error: "$($R0) + GoTo FatalRegistry + EndIf + + Set KeyParameters = $($R2) + CloseRegKey $($R1) + IfStr $(KeyParameters) == $(KeyNull) + Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE + Debug-Output $(InfName)": Cannot find component service" + GoTo FatalRegistry + EndIf + + Set OldVersionExisted = $(TRUE) + Set ValueName = "" + Set ValueData = "" + Set ValueStr = "" + Set ValueList = {} + EnumRegValue $(KeyParameters) ValueList + ForListDo $(ValueList) + Set ValueItem = $($) + Set ValueName = *($(ValueItem),1) + Set ValueData = *($(ValueItem),4) + Debug-Output $(InfName)": "$(ValueName)"="$(ValueData) + IfStr(i) $(ValueName) == "AddressList" + Set TapiAddressList = $(ValueData) + Else-IfStr(i) $(ValueName) == "RamBaseAddress" + Set RamBaseAddress = $(ValueData) + Else-IfStr(i) $(ValueName) == "InterruptNumber" + Set InterruptNumber = $(ValueData) + Else-IfStr(i) $(ValueName) == "LineType" + Set LineType = $(ValueData) + Else-IfStr(i) $(ValueName) == "LineRate" + Set LineRate = $(ValueData) + Else-IfStr(i) $(ValueName) == "BusNumber" + Set BusNumber = $(ValueData) + Else-IfStr(i) $(ValueName) == "BusType" + Set BusType = $(ValueData) + EndIf + EndForListDo + Shell $(ParamInf) Param_SaveValues + Set CurrParamSettings = $($R0) + +;*********************************************************************** +; +;*********************************************************************** +AdapterSetup = + + Shell "" DebugConfiguration "before displaying dialog" + Set from = AdapterOptions + Set InterruptNumber = *($(IRQ_List), ~($(IRQ_List),$(InterruptNumber))) + Set RAM_Hex_Value = *($(RAM_Hex_List), ~($(RAM_Addr_List),$(RamBaseAddress))) + Set RateString = *($(Rate_Strings), ~($(Line_Rates),$(LineRate))) + Shell $(ParamInf) Param_ParameterConfidence + IfStr(i) $($R0) != STATUS_SUCCESSFUL + Debug-Output $(InfName)": parameter confidence too low to bypass configuration" + GoTo AdapterOptions + EndIf + IfStr(i) $(DetectedCard) == TRUE + IfStr(i) $(!STF_INSTALL_MODE) != CUSTOM + GoTo AdapterVerify + EndIf + EndIf + +;*********************************************************************** +; +;*********************************************************************** +AdapterOptions = + + Read-Syms FileDependentDlg$(!STF_LANGUAGE) + UI Start "InputDlg" + IfStr(i) $(DLGEVENT) == "CONTINUE" + Set InterruptNumber = $(Combo1Out) + Set RAM_Hex_Value = $(Combo2Out) + Set RamBaseAddress = *($(RAM_Addr_List), ~($(RAM_Hex_List),$(RAM_Hex_Value))) + Set RateString = $(Combo3Out) + Set LineRate = *($(Line_Rates), ~($(Rate_Strings),$(RateString))) + ui pop 1 + Else-IfStr(i) $(DLGEVENT) == "BACK" + Set CommonStatus = STATUS_USERCANCEL + Debug-Output $(InfName)": Action: exit. Bye." + ui pop 1 + GoTo end + Else + Debug-Output $(InfName)": Action: unknown. Bye." + ui pop 1 + GoTo end + EndIf + IfStr(i) $(!STF_NCDETINFO) == {} + Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusType) $(BusNumber) + ifInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error." + GoTo ShellCodeError + EndIf + Set BusType = $($R1) + Set BusNumber = $($R2) + Else + Set BusType = *($(!STF_NCDETINFO),5) + Set BusNumber = *($(!STF_NCDETINFO),6) + EndIf + +;*********************************************************************** +; +;*********************************************************************** +AdapterVerify = + + Shell "" DebugConfiguration "after running dialog" + IfStr(i) $(DetectedCard) != TRUE + Shell $(ParamInf) Param_SaveValues + Set NewParamSettings = $($R0) + IfStr(i) $(CurrParamSettings) == {} + Set DiffParamSettings = $(NewParamSettings) + Else + Shell $(ParamInf) Param_DiffValues $(CurrParamSettings) + Set DiffParamSettings = $($R0) + EndIf + Debug-Output $(InfName)": Calling Param_VerifyResources" + Shell $(ParamInf) Param_VerifyResources $(DiffParamSettings) + IfStr(i) $($R0) == STATUS_SUCCESSFUL + Debug-Output $(InfName)": Param_VerifyResources succeeded" + GoTo SkipOptions + EndIf + Else + Set CardVerifyIndex = $(!STF_NCDETCARD) + Debug-Output $(InfName)": Calling Param_VerifyCard" + Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD) + IfStr(i) $($R0) == STATUS_SUCCESSFUL + Debug-Output $(InfName)": Param_VerifyCard succeeded" + GoTo SkipOptions + EndIf + EndIf + + Set from = AdapterOptions + Set to = SkipOptions + Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error: cannot get an error string." + GoTo ShellCodeError + EndIf + Set Error = $($R0) + GoTo WarningMsg + +;*********************************************************************** +; +;*********************************************************************** +SkipOptions =+ + IfInt $(OldVersionExisted) == $(TRUE) + IfStr(i) $(!NTN_InstallMode) == configure + GoTo WriteParameters + EndIf + EndIf + StartWait + IfInt $(OldVersionExisted) == $(FALSE) + IfStr(i) $(!NTN_InstallMode) == "install" + IfStr(i) $(DoCopy) == "YES" + Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + GoTo ShellCodeError + Else-IfStr(i) $($R0) == STATUS_FAILED + Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + GoTo ShellCodeError + EndIf + Set Error = $($R0) + GoTo FatalError + Else-IfStr(i) $($R0) == STATUS_USERCANCEL + GoTo SuccessfulOption + EndIf + Set SrcDir = $($R1) + EndIf + + Install "Install-Option" + IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS + Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + GoTo ShellCodeError + EndIf + Set Error = $($R0) + GoTo FatalError + EndIf + EndIf + + Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + + $(ProductSoftwareName), + + $(ProductSoftwareName), + + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + + $(ProductSoftwareImagePath), "kernelautostart", "NDIS", {}, "",+ + $(NetEventDLL) + Set OEM_ABANDON_SOFTWARE = TRUE + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error" + GoTo ShellCodeError + EndIf + Set RegistryErrorIndex = $($R0) + Set KeyProduct = $($R1) + Set SoftNetRulesKey = $($R2) + CloseRegKey $($R3) + CloseRegKey $($R4) + CloseRegKey $($R5) + + IfStr(i) $(RegistryErrorIndex) != NO_ERROR + EndWait + Debug-Output $(InfName)": Registry error: add software components" + CloseRegKey $(KeyProduct) + CloseRegKey $(SoftNetRulesKey) + GoTo FatalRegistry + EndIf + + Set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ + {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ + {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ + {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ + {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ + {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ + {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} + Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error." + GoTo ShellCodeError + EndIf + Set RegistryErrorIndex = $($R0) + IfStr(i) $(RegistryErrorIndex) != NO_ERROR + EndWait + Debug-Output $(InfName)": Registry error: add value list." + CloseRegKey $(KeyProduct) + CloseRegKey $(SoftNetRulesKey) + GoTo FatalRegistry + EndIf + + Set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ + {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(Bindable$(Option)Txt)}, + + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} + Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error." + GoTo ShellCodeError + EndIf + Set RegistryErrorIndex = $($R0) + CloseRegKey $(KeyProduct) + CloseRegKey $(SoftNetRulesKey) + IfStr(i) $(RegistryErrorIndex) != NO_ERROR + EndWait + Debug-Output $(InfName)": Resgitry error: add value list." + GoTo FatalRegistry + EndIf + EndIf + + Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) + IfInt $($R4) != -1 + Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) + EndIf + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": Cannot add hardware component" + GoTo ShellCodeError + EndIf + Set RegistryErrorIndex = $($R0) + IfStr(i) $(RegistryErrorIndex) != NO_ERROR + EndWait + Debug-Output $(InfName)": Registry error: add hardware component" + CloseRegKey $($R1) + CloseRegKey $($R2) + CloseRegKey $($R3) + GoTo FatalRegistry + EndIf + + Set KeyParameters = $($R3) + Set KeyAdapterRules = $($R2) + Set AdapterNumber = $($R4) + Set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ + {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ + {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ + {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ + {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ + {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} + Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error" + GoTo ShellCodeError + EndIf + CloseRegKey $($R1) + +;;; You need one address entry in the list for each channel on your device. +;;; FIXME - at this point RAS requires there to be one logical line per address +;;; FIXME - so the address (channel) number is ignored and the line number is used + Set TapiAddressList = {$(AdapterNumber)"-1-0"} + IfStr(i) $(Option) == HTDSU42 + Set TapiAddressList = >($(TapiAddressList),$(AdapterNumber)"-2-0") + EndIf + + Set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" + Set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) + Set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+ + {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, + + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} + Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error." + GoTo ShellCodeError + EndIf + Set RegistryErrorIndex = $($R0) + IfStr(i) $(RegistryErrorIndex) != NO_ERROR + EndWait + Debug-Output $(InfName)": Resgitry error: add value list." + CloseRegKey $(KeyParameters) + CloseRegKey $(KeyAdapterRules) + GoTo FatalRegistry + EndIf + CloseRegKey $(KeyAdapterRules) + + GoTo WriteParameters + +;*********************************************************************** +; +;*********************************************************************** +WriteParameters = + + Set NewValueList = {+ + {AddressList,$(NoTitle),$(!REG_VT_MULTI_SZ),$(TapiAddressList)},+ + {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ + {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusType)},+ + {DeviceName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ + {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(InterruptNumber)},+ + {LineType,$(NoTitle),$(!REG_VT_DWORD),$(LineType)},+ + {LineRate,$(NoTitle),$(!REG_VT_DWORD),$(LineRate)},+ + {MediaType,$(NoTitle),$(!REG_VT_SZ),$(TapiMediaType)},+ + {RamBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(RamBaseAddress)}+ + } +;;; {DebugFlags,$(NoTitle),$(!REG_VT_DWORD),$(DebugFlags)},+ + Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) + CloseRegKey $(KeyParameters) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error." + GoTo ShellCodeError + EndIf + Set RegistryErrorIndex = $($R0) + IfStr(i) $(RegistryErrorIndex) != NO_ERROR + Debug-Output $(InfName)": Registry error: Add value list" + GoTo FatalRegistry + EndIf + ; + ; Create the HARDWARE\DEVICEMAP\TAPI DEVICES\HTDSU41 key + ; + OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP" $(MAXIMUM_ALLOWED) BaseKey + shell "" HtCreateRegKey $(BaseKey) "TAPI DEVICES\HTDSU41" + IfStr(i) $($R0) != NO_ERROR + Debug-Output $(InfName)": Error creating registry key!" + GoTo FatalRegistry + EndIf + Set TapiDeviceKey = $($R1) + Set NewValueList = {+ + {Address,$(NoTitle),$(!REG_VT_MULTI_SZ),$(TapiAddressList)},+ + {"Media Type",$(NoTitle),$(!REG_VT_SZ),$(TapiMediaType)}} + Shell $(UtilityInf), AddValueList, $(TapiDeviceKey), $(NewValueList) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error." + GoTo ShellCodeError + EndIf + Set RegistryErrorIndex = $($R0) + IfStr(i) $(RegistryErrorIndex) != NO_ERROR + Debug-Output $(InfName)": Registry error: Add value list" + GoTo FatalRegistry + EndIf + CloseRegKey $(TapiDeviceKey) + CloseRegKey $(BaseKey) + ; + ; if RAS is not installed, then shell ras setup INF file to install RAS + ; else invoke RAS to allow user to configure RAS for Switch56. + ; + Read-Syms InvokeRasDlg$(!STF_LANGUAGE) + Shell "oemnsvra.inf" CheckRasInstalled + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": Error Shelling the RAS INF file oemnsvra.inf" + Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), + + "STATUS", $(InvokeRasError) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + GoTo ShellCodeError + EndIf + GoTo SuccessfulOption + EndIf + Set RasInstalled = $($R0) + Debug-Output $(InfName)": Is RAS Installed? "$(RasInstalled) + ; + ; display a message to the user that RAS setup will now be invoked + ; + IfStr(i) $(RasInstalled) == FALSE + Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", + + $(InvokeRasSetupMsg) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + GoTo SuccessfulOption + EndIf + Else + Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", + + $(InvokeRasConfigMsg) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + GoTo SuccessfulOption + EndIf + EndIf + ; + ; If this is a reconfiguration, skip the automatic call to RAS setup. + ; + IfInt $(OldVersionExisted) == $(TRUE) + IfStr(i) $(!NTN_InstallMode) == configure + GoTo SuccessfulOption + EndIf + EndIf + ; + ; Set the flags based on whether this is an IDW installation + ; + IfStr(i) $(!STF_IDW) == TRUE + Set AddCopy = NO + Set DoCopy = NO + Set DoConfig = NO + Else + Set AddCopy = YES + Set DoCopy = YES + Set DoConfig = YES + EndIf + ; + ; change the global install mode flag to configure if RAS is already installed + ; + Set SaveNTN_InstallMode = $(!NTN_InstallMode) + IfStr(i) $(RasInstalled) == TRUE + Set !NTN_InstallMode = configure + Else + Set !NTN_InstallMode = install + EndIf + ; + ; Override the default drive\directory selection so user can choose.. + ; + Set SaveSTF_SRCDIR_OVERRIDE = $(!STF_SRCDIR_OVERRIDE) + Set !STF_SRCDIR_OVERRIDE = "" + Set RasDir = "A:\"$(!STF_PLATFORM) + ; + ; now invoke RAS setup to do the right thing + ; + Debug-Output $(InfName)": Shelling to RAS:" + Shell "oemnsvra.inf" InstallOption $(!STF_LANGUAGE) "RAS" $(RasDir) $(AddCopy) $(DoCopy) $(DoConfig) + Debug-Output $(InfName)": Back from RAS: ShellCode="$($ShellCode) + ; + ; Restore the global install flags. + ; + Set !NTN_InstallMode = $(SaveNTN_InstallMode) + Set !STF_SRCDIR_OVERRIDE = $(SaveSTF_SRCDIR_OVERRIDE) + ; + ; Check for RAS errors. + ; + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": Error Shelling the RAS INF file oemnsvra.inf" + Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", + + $(InvokeRasError) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": Cannot run SetupMessage: ShellCode="$($ShellCode) + GoTo ShellCodeError + EndIf + GoTo SuccessfulOption + EndIf + ; + ; If RAS reports no change, warn the user that the driver may not + ; be configured properly. + ; + IfStr(i) $($R0) == STATUS_NO_EFFECT + Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", + + $(InvokeRasAgainMsg) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + GoTo SuccessfulOption + EndIf + EndIf + + Set CommonStatus = $($R0) + + GoTo SuccessfulOption + +;*********************************************************************** +; +;*********************************************************************** +BindingAdapter =+ + Set Error = "Binding: Sorry, not yet implemented." + GoTo FatalError + +;*********************************************************************** +; +;*********************************************************************** +RemoveAdapter = + + IfStr(i) $(ProductKeyName) == $(!NTN_RegBase) + Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + + $(ProductSoftwareName) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error" + GoTo ShellCodeError + EndIf + Set RegistryErrorIndex = $($R0) + IfStr(i) $(RegistryErrorIndex) != NO_ERROR + GoTo FatalRegistry + EndIf + Else + Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + + $(ProductSoftwareName), $(!NTN_RegBase) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error" + GoTo ShellCodeError + EndIf + Set RegistryErrorIndex = $($R0) + IfStr(i) $(RegistryErrorIndex) != NO_ERROR + GoTo FatalRegistry + EndIf + EndIf + GoTo end + +;*********************************************************************** +; +;*********************************************************************** +UpgradeSoftware = + + IfStr(i) $(ProductKeyName) == $(!NTN_RegBase) + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct + IfStr $(KeyProduct) != $(KeyNull) + GetRegValue $(KeyProduct),"MajorVersion", VersionInfo + Set Version = *($(VersionInfo), 4) + Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error" + GoTo ShellCodeError + EndIf + Set !UG_Filename = $($R0) + IfStr(i) $(!UG_Filename) != "" + install "Install-Update" + IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS + GoTo FatalError + EndIf + EndIf + SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} + SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} + IfInt $(Version) != $(ProductVersion) + EndIf + CloseRegKey $(KeyProduct) + Else + GoTo FatalRegistry + EndIf + Else + OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) + + $(MAXIMUM_ALLOWED) NetworkCardKey + IfStr(i) $(NetworkCardKey) != $(KeyNull) + GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo + Set ServiceName = *($(ServiceNameInfo), 4) + OpenRegKey $(NetworkCardKey) "" "NetRules" + + $(MAXIMUM_ALLOWED) NetRuleKey + IfStr(i) $(NetRuleKey) != $(KeyNull) + Else + GoTo FatalRegistry + EndIf + CloseRegKey $(NetRules) + CloseRegKey $(NetworkCardKey) + Else + GoTo FatalRegistry + EndIf + OpenRegKey $(!REG_H_LOCAL) "" + + $(!NTN_ServiceBase)"\"$(ServiceName) + + $(MAXIMUM_ALLOWED) ServiceKey + IfStr(i) $(ServiceKey) != $(KeyNull) + CloseRegKey $(ServiceKey) + Else + GoTo FatalRegistry + EndIf + EndIf + GoTo end + +;*********************************************************************** +; +;*********************************************************************** +SuccessfulOption = + + GoTo end + +;*********************************************************************** +; +;*********************************************************************** +Abandon = + + ForListDo $(OEM_ABANDON_OPTIONS) + Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + + $(ProductSoftwareName), $($) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error" + GoTo ShellCodeError + EndIf + Set RegistryErrorIndex = $($R0) + IfStr(i) $(RegistryErrorIndex) != NO_ERROR + GoTo FatalRegistry + EndIf + EndForListDo + IfStr(i) $(OEM_ABANDON_SOFTWARE) == TRUE + Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + + $(ProductSoftwareName), FALSE + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error" + GoTo ShellCodeError + EndIf + Set RegistryErrorIndex = $($R0) + IfStr(i) $(RegistryErrorIndex) != NO_ERROR + GoTo FatalRegistry + EndIf + EndIf + GoTo end + +;*********************************************************************** +; +;*********************************************************************** +WarningMsg = + + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + GoTo ShellCodeError + EndIf + IfStr(i) $($R1) == "OK" + GoTo $(to) + Else-IfStr(i) $($R1) == "CANCEL" + GoTo $(from) + EndIf + GoTo end + +;*********************************************************************** +; +;*********************************************************************** +NonFatalInfo = + + Set Severity = STATUS + Set CommonStatus = STATUS_USERCANCEL + IfStr(i) $(Error) == "" + Set Severity = NONFATAL + Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + GoTo ShellCodeError + EndIf + Set Error = $($R0) + EndIf + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + GoTo ShellCodeError + EndIf + IfStr(i) $($R1) == "OK" + GoTo $(from) + EndIf + GoTo end + +;*********************************************************************** +; +;*********************************************************************** +FatalRegistry = + + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + GoTo ShellCodeError + EndIf + Set Error = $($R0) + GoTo FatalError + +;*********************************************************************** +; +;*********************************************************************** +FatalDetect = + + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + Debug-Output $(InfName)": ShellCode error: cannot get an error string." + GoTo ShellCodeError + EndIf + Set Error = $($R0) + GoTo FatalError + +;*********************************************************************** +; +;*********************************************************************** +FatalError = + + IfStr(i) $(Error) == "" + Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + GoTo ShellCodeError + EndIf + Set Error = $($R0) + EndIf + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) + IfInt $($ShellCode) != $(!SHELL_CODE_OK) + GoTo ShellCodeError + EndIf + GoTo SetFailed + +;*********************************************************************** +; +;*********************************************************************** +ShellCodeError = + + Set DlgType = "MessageBox" + Set STF_MB_TITLE = $(ShellCodeErrorTitle) + Set STF_MB_TEXT = $(ShellCodeErrorText) + Set STF_MB_TYPE = 1 + Set STF_MB_ICON = 3 + Set STF_MB_DEF = 1 + UI Start "Error Message" + GoTo SetFailed + +;*********************************************************************** +; +;*********************************************************************** +SetFailed = + + Set CommonStatus = STATUS_FAILED + IfStr(i) $(OEM_ABANDON_ON) == TRUE + Set OEM_ABANDON_ON = FALSE + GoTo Abandon + EndIf + GoTo end + +;*********************************************************************** +; +;*********************************************************************** +end = + + Set !DebugOutputControl = $(OldDebugControl) + Return $(CommonStatus) + +;*********************************************************************** +; +;*********************************************************************** +[HtCreateRegKey] + Debug-Output $(InfName)": Entering [HtCreateRegKey]" + Set ECR_Result = NO_ERROR + Set ECR_BaseKeyHandle = $($0) + Set ECR_NewPath = $($1) + Set KeyNull = "" + Set MAXIMUM_ALLOWED = 33554432 + + Debug-Output $(InfName)": HtCreateRegKey - ECR_BaseKeyHandle = "$(ECR_BaseKeyHandle) + Debug-Output $(InfName)": ECR_NewPath = "$(ECR_NewPath) + Debug-Output $(InfName)": MAXIMUM_ALLOWED = "$(MAXIMUM_ALLOWED) + Debug-Output $(InfName)": KeyNull = "$(KeyNull) + + OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_NewPath) $(MAXIMUM_ALLOWED) + + ECR_BaseKey + Debug-Output $(InfName)": ECR_BaseKey = "$(ECR_BaseKey) + Debug-Output $(InfName)": OpenRegKey returned "$($R0) + IfStr $(ECR_BaseKey) == $(KeyNull) + Debug-Output $(InfName)": ECR_BaseKey == KeyNull" + Else + Debug-Output $(InfName)": ECR_BaseKey != KeyNull" + Set ECR_KeyHandle = $(ECR_BaseKey) + GoTo ECR_Return + EndIf + + Set ECR_TmpPath = "" + Split-String $(ECR_NewPath) "\" ECR_PList + Debug-Output $(InfName)": ECR_PList = "$(ECR_PList) + ForListDo $(ECR_PList) + IfStr(i) $($) != "\" + IfInt $(#) == 1 + Set ECR_TmpPath = $($) + Else + Set ECR_TmpPath = $(ECR_TmpPath)"\"$($) + EndIf + Debug-Output $(InfName)": Determining if "$(ECR_TmpPath)" exists" + OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_TmpPath) $(MAXIMUM_ALLOWED) ECR_BaseKey + IfStr $(ECR_BaseKey) == $(KeyNull) + Debug-Output $(InfName)": Creating "$(ECR_TmpPath) + CreateRegKey $(ECR_BaseKeyHandle) {$(ECR_TmpPath),0,GenericClass} "" $(MAXIMUM_ALLOWED) "" ECR_KeyHandle + IfStr(i) $(ECR_KeyHandle) == $(KeyNull) + Set ECR_Result = $($R0) + GoTo ECR_Return + EndIf + EndIf + EndIf + EndForListDo +ECR_Return = + + Return $(ECR_Result) $(ECR_KeyHandle) + +;*********************************************************************** +; +;*********************************************************************** +[DebugConfiguration] + Debug-Output $(!p:InfName)": **CONFIGURATION STATE: "$($0) + Debug-Output $(!p:InfName)": InterruptNumber is "$(!p:InterruptNumber) + Debug-Output $(!p:InfName)": RamBaseAddress is "$(!p:RamBaseAddress) + Debug-Output $(!p:InfName)": LineType is "$(!p:LineType) + Debug-Output $(!p:InfName)": LineRate is "$(!p:LineRate) + Return + +;*********************************************************************** +; +;*********************************************************************** +[Install-Option] + Set STF_VITAL = "" + IfStr(i) $(AddCopy) == "YES" + AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers + EndIf + IfStr(i) $(DoCopy) == "YES" + Set !STF_NCPA_FLUSH_COPYLIST = TRUE + CopyFilesInCopyList + EndIf + Exit + +;*********************************************************************** +; +;*********************************************************************** +[Install-Update] + Set STF_VITAL = "" + Set STF_OVERWRITE = "VERIFYSOURCEOLDER" + AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers + AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) + Set !STF_NCPA_FLUSH_COPYLIST = TRUE + CopyFilesInCopyList + Exit + +;*********************************************************************** +; +;*********************************************************************** +[Source Media Descriptions] + 1 = "Windows NT Setup Disk #1" , TAGFILE = HTDSU41.SYS + +;*********************************************************************** +; +;*********************************************************************** +[ProductType] + STF_PRODUCT = Winnt + STF_PLATFORM = I386 + +;*********************************************************************** +; +;*********************************************************************** +[Files-Inf] + 1, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename) + +;*********************************************************************** +; +;*********************************************************************** +[Files-HTDSU41] + 1, HTDSU41.SYS, SIZE=65536 + +;*********************************************************************** +; +;*********************************************************************** +[LanguagesSupported] + ENG + +;*********************************************************************** +; +;*********************************************************************** +[OptionsTextENG] + HTDSU41 = "HT Communications DSU41" +; HTDSU42 = "HT Communications DSU42" + +;*********************************************************************** +; +;*********************************************************************** +[FileConstantsENG] + ProCaption = "Windows NT Setup" + ProCancel = "Cancel" + ProCancelMsg = "Windows NT Networking is not correctly installed. "+ + "Are you sure you want to cancel copying files?" + ProCancelCap = "Network Setup Message" + ProText1 = "Copying:" + ProText2 = "To:" + + FunctionTitleHTDSU41 = "HT Communications DSU41 Card Setup" + ProductSoftwareDescription = "HT Communications DSU41 Driver" + ProductHardwareHTDSU41Description = "HT Communications DSU41" + ProductSoftwareTitle = "HT Communications DSU41 Driver" + ProductHardwareHTDSU41Title = "HT Communications DSU41 Adapter" + + ShellCodeErrorTitle = "Error: "$(FunctionTitle)$(Option)) + ShellCodeErrorText = "Shell Code Error." + +;*********************************************************************** +; +;*********************************************************************** +[DialogConstantsENG] + Help = "&Help" + Exit = "Cancel" + OK = "OK" + HelpContext = "" + Continue = "Continue" + Cancel = "Cancel" + +;*********************************************************************** +; +;*********************************************************************** +[FileDependentDlgENG] + DlgType = "MultiCombo" + DlgTemplate = "WD" + Caption = $(FunctionTitle)$(Option) + + Combo1Label = "&IRQ Level:" + Combo1List = $(IRQ_List) + Combo1Out = $(InterruptNumber) + + Combo2Label = "&RAM Base Address:" + Combo2List = $(RAM_Hex_List) + Combo2Out = $(RAM_Hex_Value) + + Combo3Label = "&Transmit Rate:" + Combo3List = $(Rate_Strings) + Combo3Out = $(RateString) + + ComboListItemsIn = {Combo1List, Combo2List, Combo3List} + ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out} + EditTextIn = "" + EditTextLim = "" + CBOptionsGreyed = {} + NotifyFields = {NO, NO, NO} +; HelpContext = $(!IDH_DB_OEMNAD1_INS) + +;*********************************************************************** +; +;*********************************************************************** +[InvokeRasDlgENG] + InvokeRasSetupMsg = "HT Communications DSU41 setup is complete. "+ + "Remote Access Services (RAS) must now be installed. "+ + "Please configure the HTDSU41Sw56 ports in RAS "+ + "setup to enable you to use RAS over the HTDSU41." + InvokeRasConfigMsg = "HT Communications DSU41 setup is complete. "+ + "Remote Access Services (RAS) setup must now be invoked. "+ + "Please configure the HTDSU41Sw56 ports in RAS "+ + "setup to enable you to use RAS over the HTDSU41." + InvokeRasAgainMsg = "HT Communications DSU41 setup is NOT complete! "+ + "Remote Access Services (RAS) is not configured to use a "+ + "HTDSU41Sw56 port. You must configure at least one HTDSU41Sw56 "+ + "port in RAS setup now, or you will have reconfigure the adapter "+ + "before running RAS configuration again later." + InvokeRasError = "HT Communications DSU41 setup encountered an error "+ + "while invoking the RAS setup INF file (OEMNSVRA.INF). "+ + "Please make sure that the file is present in the "+ + "System32 directory and is the proper file." + |