diff options
Diffstat (limited to '')
| -rw-r--r-- | private/ntos/ndis/madge/driver/mdgmport.upd | 553 |
1 files changed, 553 insertions, 0 deletions
diff --git a/private/ntos/ndis/madge/driver/mdgmport.upd b/private/ntos/ndis/madge/driver/mdgmport.upd new file mode 100644 index 000000000..62ca51952 --- /dev/null +++ b/private/ntos/ndis/madge/driver/mdgmport.upd @@ -0,0 +1,553 @@ +/*************************************************************************** +* +* MDGMPORT.UPD +* +* Update log and version information for FastMAC Plus based NDIS 3.0 +* miniport driver. +* +* Copyright (c) Madge Networks Ltd 1994 +* +* COMPANY CONFIDENTIAL +* +* Created: 20/06/1994 +* +****************************************************************************/ + +/*--------------------------------------------------------------------------- +| +| Helper macro to make a DWORD. +| +---------------------------------------------------------------------------*/ + +#define MAKE_DWORD(a, b, c, d) \ + ((((DWORD) (a)) << 24) + \ + (((DWORD) (b)) << 16) + \ + (((DWORD) (c)) << 8 ) + \ + (((DWORD) (d)) )) + + +/*--------------------------------------------------------------------------- +| +| Version number. +| +---------------------------------------------------------------------------*/ + +// +// Define both a string and a comma separated list of numbers. These will be +// used by the resource compiler when version stamping the driver file. +// + +#define MADGE_NT_VERSION 2,04,30,00 +#define MADGE_NT_VERSION_STR "2.04.30" +#define MADGE_NT_VERSION_DWORD MAKE_DWORD(2, 4, 30, 0) + +#define _IS_ALPHA // Define if alpha version. + + +/*--------------------------------------------------------------------------- +| +| Compile time string definitions identifying driver type. Used in one of +| the request calls (OID_GEN_VENDOR_DESCRIPTION). +| +|--------------------------------------------------------------------------*/ + +#if NDIS_NT +#define MADGE_NT_NAME "MdgMPort" +#define MADGE_DRIVER_NAME NDIS_STRING_CONST("MdgMPort"); +#define MADGE_FMP_NAME NDIS_STRING_CONST("MDGMPORT.BIN"); +#endif + +#if DBG +#define _DRIVER_PREFIX "DEBUG_MADGE_NDIS3_DRIVER:" +#else +#define _DRIVER_PREFIX "MADGE_NDIS3_DRIVER:" +#endif + +#define DRIVER_VERSION \ + _DRIVER_PREFIX##" "##MADGE_NT_NAME##" "##MADGE_NT_VERSION_STR + + +/*--------------------------------------------------------------------------- +Ý +Ý Product instance identification string. +Ý +---------------------------------------------------------------------------*/ + +#ifdef _IS_ALPHA +#define NT_PRODUCT_INSTANCE_ID "MDGMPORT v"##MADGE_NT_VERSION_STR +#else +#define NT_PRODUCT_INSTANCE_ID "MDGMPORT.SYS v"##MADGE_NT_VERSION_STR +#endif + + +/*--------------------------------------------------------------------------- +| +| String for identification by MVER. +| +|--------------------------------------------------------------------------*/ + +#define MVER_STRING \ + "VeRsIoN="##MADGE_NT_NAME##" "##MADGE_NT_VERSION_STR + + +/*--------------------------------------------------------------------------- +| +| Update history. +| +|---------------------------------------------------------------------------- + + 2.04.30 10/10/1995 PBA + + Source to be shipped to Microsoft. This is the LSS 4.31 + build with support added for non-intel platforms. + + 2.04.01-.29 Reserved for 4.3(1) maintanance. + + 2.04 21/07/1995 PBA + + Re-released for 4.3(1) with PCI-TI DMA/DIO fix. + + 2.03.01-.49 Reserved for 4.3(1) maintanance. + + 2.03.01 14/07/1995 PBA + + Now uses FTK 2.21.11 which has software handshakes + for all PCI cards in pseduo DMA mode. There is a race + condition on a PCI bus whereby SWHLDA gets "stuck" and + a pending pseudo DMA starts before the host tells + the adapter to start it. + + FTK 2.21.11 also fixes a bug in the RAP 1B MMIO code + where we could erroneously do an MMIO transfer if + we were on a shared interrupt. + + FTK 2.21.11 also fixes a PCI-IT DMA problem. We were + not checking if pseudo DMA was enabled in the + interrupt handler and because the interrupt handler + is called for real DMA should SWHRQ be set we would + do some erroneous pseudo DMA processing. + + 2.03 30/06/1995 PBA + + Hardware thread released for LSS 4.3(1) with support + for PCI-TI adapters and untested support for PCI-Abyss + adapters. Uses FTK 2.21.07 and FMPLUS 1.36. + + 2.02 Used for non-intel thread drivied from LSS 4.30. + + 2.01.03 12/05/1995 PBA + + Now uses FTK 2.21.02 that can cope with the stray + initialisation interrupt generated by some + socket controllers. + + 2.01.02 07/04/1995 PBA + + Now uses FTK 2.21.01 and FastMAC Plus 1.34.10 which + have an extended handshake on transmit MMIO to + avoid a SAM upload/DIO race condition. + + 2.01.01 05/04/1995 PBA + + Power PC build. Only tested on ISA and PCI adapters. + Only works in PIO mode. + + + 2.02.01 - .49 Reserved for 4.3(0 and/or PnP) maintenance. + + 2.01 02/02/1995 PBA + + Released for 4.3(0 and/or PnP). Any previous 4.3(x) + threads are now dead. + + 2.00.61 02/02/1995 PBA + + Now uses FastMAC Plus 1.28. Given to DaveF for Chicago + testing and possible shipping to Microsoft for M8 + and/or NT 3.51. + + 2.00.60 01/02/1995 PBA + + Windows95 build 310 always returns the native bus type + of the PC rather than the type of the bus the adapter + is in. To get around the problem we now read the bus + type from the wrapper and then override the value if + we find an adapter type parameter in the registry. + + 2.00.59 31/01/1995 PBA + + The Windows95 wrapper now supports the + NdisReadPciSlotInformation so we can now have a binary + compatible build. The register parameter "PlatformType" + is used to determine the OS type the driver is running on. + + Also allowed "IoBaseAddress" to be used instead of + "IoLocation" for forwards compatibility with NT 3.51. + + 2.00.58 24/01/1995 PBA + + Uses FTK 2.20.26 that fixes a problem where the software + handshake was not being enabled properly for PCMCIA + adapters. + + 2.00.57 12/01/1995 PBA + + Given to central support to fix PRF 2841. + Uses FastMAC Plus 1.20. + + 2.00.56 12/01/1995 PBA + + Now uses FTK 2.20.25 that has a fix to avoid + driver_remove_adapter deallocating the FastMAC Plus + dma test buffer when it has not been allocated. + + 2.00.55 12/01/1995 PBA + + Now deregister shutdown handler in MadgeCleanupAdapter + to avoid the odd blue screen when MadgeShutdown was + called after we had freed the adapter structure. + + 2.00.54 12/01/1995 PBA + + Now uses FTK 2.20.24 that allows the driver to run + on none Madge adapters if #define MADGIC_BIT 0x8000 + is present in user.h. + + 2.00.53 11/01/1995 PBA + + Given to central support. Uses FastMAC Plus 1.25. + + 2.00.52 11/01/1995 PBA + + Given to central support to fix PRF 2841. + i.e. Insufficient shared memory available when the + driver is installed while NT is being installed to + start the adapter during the NT installation. The solution + is to add a shared memory aribitration routine which + attempts to reduce the number of RX/TX slots and the + maxiumum frame size until there is enough shared memory + left. Uses FastMAC Plus 1.20. + + 2.00.51 06/01/1995 PBA + + Shipped source to FrancisT so he could build it on + a MIPs. Uses FastMAC Plus 1.25. + + 2.00.50 03/01/1995 PBA + + Changed so that TX/RX buffers on use shared memory in DMA + mode. PIO and MMIO use ordinary memory. + + Version numbers 1.50.01 to 1.99.99 are used for a FastMAC version. + + 1.07.52 13/12/1994 PBA + + No longer sets monitor contender in the open options. + + 1.07.51 09/12/1994 PBA + + Changed so that if we are compiling for a none Intel + platform we allocate map registers properly. For Intel + platforms we still use the cludge where we allocate + the adapter block ourselves. This should solve the + DEC AXP 2100 problem. + + 1.07.50 09/12/1994 PBA + + Revised to use the new FTK (2.20.xx). + + 1.07.01 - .49 Reserved for release 4.3(1) maintenance. + + 1.07 Reserved for release 4.3(1). + + Screwed up the versions numbers. Live development jumps to 1.07.50 + + 1.06.52 29/11/1994 PBA + + Gave source to FrancisF to try and track down the + DEC 2100 shared memory allocation problem. + + 1.06.51 24/11/1994 PBA + + Moved the clearing of the private SRB in progress flag + out of the DPR and into the ISR as the DPR doesn't + get called during the initialisation code under Chicago. + Doing it this way avoids the nasty delay loop in the + initialisation code when setting the product instance id. + + ---- Special --------------------------------------------------------------- + + 1.06.81 - Microsoft thread based on 1.06.80 splits here. + + 1.06.80 11/01/1994 PBA + + Same as 1.06.50 but accepts IoBaseAddress for the I/O + location as well as IoLocation. Uses FastMAC Plus 1.20. + Shipped to Jameel Hyder at Microsoft for NT 3.51 beta. + + ---- Special --------------------------------------------------------------- + + 1.06.70 13/12/1994 PBA + + This is an alpha for FrancisT derived directly from + 1.06. The only differences are that it does not open in + monitor contention mode, it uses map registers rather + than the "horrible hack" and it is an NT only build. + + ---- Special --------------------------------------------------------------- + + 1.06.60 05/11/1994 PBA + + Same as 1.06.50 but with FastMAC Plus 1.24. + + ---- Special --------------------------------------------------------------- + + 1.06.50 23/11/1994 PBA + + Shipped to Microsoft for possible inclusion in the next + NT and Chicago (M8) releases. Uses FastMAC Plus v1.20. + This is based on 1.05.04. + + ---------------------------------------------------------------------------- + + 1.06.01 - .49 Reserved for release 4.3(0) maintenance. + + 1.06 Reserved for release 4.3(0). + + Source used for 4.3(1) split from the main thread here. + + 1.05.04 22/11/1994 PBA + + Changed the initialisation code to allow as few as + 2 RX and 2 TX slots. Hopefully this will keep + Microsoft quiet about shared memory allocation. + + 1.05.03 22/11/1994 PBA + + Added a shutdown handler. Note there is no documentation + for this, just an example in the IBMTOK2i source. + + 1.05.02 21/11/1994 PBA + + Now re-tries bring-up up to 10 times. + + 1.05.01 18/11/1994 PBA + + Added code to set a product instance id in FastMAC plus. + + 1.05 18/11/1994 PBA + + Windows95 build for PnP field trials. Uses FastMAC Plus + v1.20. + + 1.04.54 17/11/1994 PBA + + Modified the PnP HWI to set the channel ready bit + if the active float channel ready bit is set in the + PnP hardware features byte. + + 1.04.53 17/11/1994 PBA + + Added support for PCI under Chicago. This has to be + done with a compile time switch because the + NdisReadPciSlotInformation functions is not in the + Chicago (M7) Ndis wrapper. If this function call + is present then Chicago refuses to load the driver. + We get the PCI configuration in Chicago by just reading + from the registry. + + 1.04.52 16/11/1994 PBA + + Changed PnP HWI so that it knows about C30s. + + 1.04.51 07/11/1994 PBA + + Added PnP support. Chicago only at the moment. + + 1.04.50 04/11/1994 PBA + + Added PCMCIA support. Chicago only at the moment. + + Version numbers 1.04.01 to 1.04.49 are reserved for maintenance fixes + to version 1.04. Live development continues at 1.04.50. + + 1.04 08/11/1994 PBA + + Cludged version use for PCI Releases. Uses FastMAC Plus v1.21 + and hwi_pci.c from v1.03 archive. This means that the + driver does MMIO on RX only (pseudo DMA on transmit). + + 1.03.07 07/11/1994 PBA + + Alpha version shipped to Gordon Cairns. + Uses FastMAC Plus alpha v1.23.01 + + 1.03.06 03/11/1994 PBA + + Now supports transmit and receive PCI MMIO. + + 1.03.05 02/11/1994 PBA + + Now sets the FTK error code if RX or TX buffers cannot + be allocaed. + + 1.03.04 01/11/1994 PBA + + Arranged for the PCI cards to be defaulted to pseudo DMA + if MMIO memory is not allocated or cannot be mapped into + virtual memory. + + 1.03.03 01/11/1994 PBA + + Tidied up the error messages written to the event long + as the new DDK has a better range of error codes. + + 1.03.02 11/10/1994 PBA + + Added a RingSpeed parameter to set the ringspeed(!). + RingSpeed == 0 means don't care about the ring speed; + use the default or use Force4/Force16. 1 means 4MBits. + 2 means 16 MBits. RingSpeed overrides Force4/Force16. + + 1.03.01 7/10/1994 PD + + Added traffic monitoring code enabled by uncommenting + line defining OID_MADGE_MONITOR in NDISMOD.H. + + + 1.03 28/09/1994 PBA + + Released for PCI release 4.2(3). + + 1.02.53 28/09/1994 PBA + + Now uses FastMAC Plus 1.21. + + 1.02.52 28/09/1994 PBA + + Added PCI support. There is a new registry parameter + called "NoMmio". By default MMIO is used as the PCI + transfer method. If NoMmio is 1 then pseudo DMA is used. + PCI adapters are identified by the "SlotNumber" parameter + in the registry. This is actually set to the logical + device number of the PCI adapter. If SlotNumber is set + to 0xffff then the PCI bus is searched for the first + unused Madge PCI adapter. + + 1.02.51 21/09/1994 PBA + + Added a Multiprocessor parameter. If this parameter is + non-zero and the DMA channel is zero then multiprocessor + safe PIO is used. The code which enabled multiprocessor + safe PIO by when the DMA channel was set to 0x8000 has + been left in for backwards compatibility. + + 1.02.50 12/09/1994 PBA + + The I/O location of the SIF registers is now recorded in + the adapter structure at initialisation time by the + hwi_xxx.c routines. Previously the SIF registers were + assumed to be at fixed offsets from a SIF base address. + This change is needed to support PCI adapters. + + Due to the problems with FastMAC Plus a re-release with a new FastMAC + plus image will be needed for LSS 4.30. This release will be based on + 1.02.xx which is the same as the earlier LSS 4.30 with some minor bug + fixes. Live development continues with 1.02.50. + + 1.02.04 12/09/1994 PBA + + Now sets the "Madgic" bits in the FMP dowload header so + that we will run on none Madge adapters. + + 1.02.03 12/09/1994 PBA + + Fixed a bug where we didn't check if the tx buffer memory + allocation had succeeded. + + 1.02.02 31/08/1994 PBA + + Source shipped to Microsoft. + + 1.02.01 31/08/1994 PBA + + Noew only checks the major and minor version numbers + of the download. + + 1.02 24/08/1994 PBA + + Re-released for 4.3. + + 1.01.03 16/08/1994 PBA + + Added comments about ring speed and duplicate addresses + to the cannot open error message. + + 1.01.02 11/08/1994 PBA + + At the recommendation of Kevin Martin (Microsoft) the + NDIS_MAC_OPTIONS_NO_LOOPBACK bit is no-longer set and we + just allow the hardware to do loopback. + + 1.01.01 10/08/1994 PBA + + Added a flag to the adapter structure called UseMPSafePIO. + If this flag is set then all of the DIO on the transmit + and receive paths is encapsulated in functions invoked + by NdisMSynchronizeWithInterrupt to protect the DIO + from PIO interrupts happening on another processor in + a multiprocessor machine. This flag is set if the DMA + channel is specified as 0x8000 - see MadgeReadRegstry(). + + 1.01 22/07/1994 PBA + + Released for 4.30. + + 1.00.08 20/07/1994 PBA + + Added support for a Force16 option for ATULA adapters + and Force16 and Force4 options for AT/P and ISA/C/P + adapters. + + 1.00.07 19/07/1994 PBA + + Added an option to allow the adapter to be forced open + (it was always done before, which is wrong). + + 1.00.06 04/07/1994 PBA + + Found a race condition with ATULA cards in PIO mode. We + MUST claim interrupts (even if they are just for PIO) + until the "DMA" initialisation test is over or sometimes + WFWG (and possibly NT) permanently masks out our interrupts. + + 1.00.05 01/07/1994 PBA + + Alpha version for Gordon Cairns to test. + + 1.00.04 29/06/1994 PBA + + Used conditional assembly in sys_mem.c so that the + I/O on Intel platforms does not involve any mapping + (since the mapping always results in the port address + anyway). + + 1.00.03 28/06/1994 PBA + + Now uses FTK common to all of the NDIS3 drivers. + + 1.00.02 28/06/1994 PBA + + Fixed a bug in the ChangeFilter function. We were carefully + working out the new open options and passing the old options + in the SRB. + + 1.00.01 21/06/1994 PBA + + First instance for MdgMPort. Derived from MdgNT v1.01.12 + +---------------------------------------------------------------------------*/ + + +/******** End of MDGMPORT.UPD **********************************************/ +
\ No newline at end of file |