diff options
Diffstat (limited to '')
-rw-r--r-- | public/sdk/inc/mmddk.h | 692 |
1 files changed, 692 insertions, 0 deletions
diff --git a/public/sdk/inc/mmddk.h b/public/sdk/inc/mmddk.h new file mode 100644 index 000000000..545bb00e2 --- /dev/null +++ b/public/sdk/inc/mmddk.h @@ -0,0 +1,692 @@ +/****************************************************************************/ +/* */ +/* MMDDK.H - Include file for Multimedia Device Development Kit */ +/* */ +/* Note: You must include the WINDOWS.H and MMSYSTEM.H header files */ +/* before including this file. */ +/* */ +/* Copyright (c) 1990-1991, Microsoft Corp. All rights reserved. */ +/* */ +/****************************************************************************/ + +#ifndef _INC_MMDDK +#define _INC_MMDDK + +#include "pshpack1.h" // Assume byte packing throughout + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* If defined, the following flags inhibit inclusion + * of the indicated items: + * + * MMNOMIDIDEV - MIDI support + * MMNOWAVEDEV - Waveform support + * MMNOAUXDEV - Auxiliary output support + * MMNOMIXERDEV - Mixer support + * MMNOTIMERDEV - Timer support + * MMNOJOYDEV - Joystick support + * MMNOMCIDEV - MCI support + * MMNOTASKDEV - Task support + */ +#ifdef MMNOTIMER + #define MMNOTIMERDEV +#endif +#ifdef MMNOWAVE + #define MMNOWAVEDEV +#endif +#ifdef MMNOMIDI + #define MMNOMIDIDEV +#endif +#ifdef MMNOAUX + #define MMNOAUXDEV +#endif +#ifdef MMNOJOY + #define MMNOJOYDEV +#endif +#ifdef MMNOMMIO + #define MMNOMMIODEV +#endif +#ifdef MMNOMCI + #define MMNOMCIDEV +#endif + + +/*************************************************************************** + + Helper functions for drivers + +***************************************************************************/ + +#ifndef NODRIVERS +#define DRV_LOAD 0x0001 +#define DRV_ENABLE 0x0002 +#define DRV_OPEN 0x0003 +#define DRV_CLOSE 0x0004 +#define DRV_DISABLE 0x0005 +#define DRV_FREE 0x0006 +#define DRV_CONFIGURE 0x0007 +#define DRV_QUERYCONFIGURE 0x0008 +#define DRV_INSTALL 0x0009 +#define DRV_REMOVE 0x000A + +#define DRV_RESERVED 0x0800 +#define DRV_USER 0x4000 + +#define DRIVERS_SECTION TEXT("DRIVERS32") // Section name for installed drivers +#define MCI_SECTION TEXT("MCI32") // Section name for installed MCI drivers + +#endif /* !NODRIVERS */ + +#define DCB_NOSWITCH 0x0008 // don't switch stacks for callback +#define DCB_TYPEMASK 0x0007 // callback type mask +#define DCB_NULL 0x0000 // unknown callback type + +// flags for wFlags parameter of DriverCallback() +#define DCB_WINDOW 0x0001 // dwCallback is a HWND +#define DCB_TASK 0x0002 // dwCallback is a HTASK +#define DCB_FUNCTION 0x0003 // dwCallback is a FARPROC +#define DCB_EVENT 0x0005 // dwCallback is an EVENT + +BOOL APIENTRY DriverCallback(DWORD dwCallback, DWORD dwFlags, + HDRVR hDevice, DWORD dwMsg, DWORD dwUser, DWORD dwParam1, DWORD dwParam2); + +// generic prototype for audio device driver entry-point functions +// midMessage(), modMessage(), widMessage(), wodMessage(), auxMessage() +//typedef DWORD (SOUNDDEVMSGPROC)(WORD, WORD, DWORD, DWORD, DWORD); +//typedef SOUNDDEVMSGPROC FAR *LPSOUNDDEVMSGPROC; + +#define DRVM_INIT 100 + +// message base for driver specific messages. +// +#define DRVM_MAPPER 0x2000 +#define DRVM_USER 0x4000 +#define DRVM_MAPPER_STATUS (DRVM_MAPPER+0) +#define DRVM_MAPPER_RECONFIGURE (DRVM_MAPPER+1) + +#define DRV_QUERYDRVENTRY (DRV_RESERVED + 1) /* ;Internal*/ +#define DRV_QUERYDEVNODE (DRV_RESERVED + 2) /* ;Internal*/ +#define DRV_QUERYNAME (DRV_RESERVED + 3) /* ;Internal*/ +#define DRV_QUERYDRIVERIDS (DRV_RESERVED + 4) /* ;Internal*/ +#define DRV_QUERYMAPPABLE (DRV_RESERVED + 5) /* ;Internal*/ +#define DRV_QUERYMAPID (DRV_RESERVED + 6) /* ;Internal*/ +#define DRV_QUERYNUMPORTS (DRV_RESERVED + 8) /* ;Internal*/ +#define DRV_QUERYMODULE (DRV_RESERVED + 9) +#define DRV_QUERYFILENAME (DRV_RESERVED + 10) /* ;Internal*/ +#define DRV_PNPINSTALL (DRV_RESERVED + 11) + + + +// +// messages that have IOCTL format +// dw1 = NULL or handle +// dw2 = NULL or ptr to DRVM_IOCTL_DATA +// return is MMRESULT +// +#define DRVM_IOCTL 0x100 +#define DRVM_ADD_THRU (DRVM_IOCTL+1) +#define DRVM_REMOVE_THRU (DRVM_IOCTL+2) +#define DRVM_IOCTL_LAST (DRVM_IOCTL+5) + +typedef struct { + DWORD dwSize; // size of this structure (inclusive) + DWORD dwCmd; // IOCTL command code, 0x80000000 and above reserved for system + } DRVM_IOCTL_DATA, FAR * LPDRVM_IOCTL_DATA; + +// command code ranges for dwCmd field of DRVM_IOCTL message +// codes from 0 to 0x7FFFFFFF are user defined +// codes from 0x80000000 to 0xFFFFFFFF are reserved for future +// definition by microsoft +// +#define DRVM_IOCTL_CMD_USER 0x00000000L +#define DRVM_IOCTL_CMD_SYSTEM 0x80000000L + +// device ID for 386 AUTODMA VxD +#define VADMAD_Device_ID 0X0444 + +#ifndef MMNOWAVEDEV +/**************************************************************************** + + Waveform device driver support + +****************************************************************************/ + +// maximum number of wave device drivers loaded +#ifndef NOWIN31 +#define MAXWAVEDRIVERS 10 +#else +#define MAXWAVEDRIVERS 4 +#endif + + +// waveform input and output device open information structure +typedef struct waveopendesc_tag { + HWAVE hWave; // handle + LPWAVEFORMAT lpFormat; // format of wave data + DWORD dwCallback; // callback + DWORD dwInstance; // app's private instance information + UINT uMappedDeviceID; // device to map to if WAVE_MAPPED set +} WAVEOPENDESC; +typedef WAVEOPENDESC FAR *LPWAVEOPENDESC; + +// messages sent to wodMessage() entry-point function +#define WODM_GETNUMDEVS 3 +#define WODM_GETDEVCAPS 4 +#define WODM_OPEN 5 +#define WODM_CLOSE 6 +#define WODM_PREPARE 7 +#define WODM_UNPREPARE 8 +#define WODM_WRITE 9 +#define WODM_PAUSE 10 +#define WODM_RESTART 11 +#define WODM_RESET 12 +#define WODM_GETPOS 13 +#define WODM_GETPITCH 14 +#define WODM_SETPITCH 15 +#define WODM_GETVOLUME 16 +#define WODM_SETVOLUME 17 +#define WODM_GETPLAYBACKRATE 18 +#define WODM_SETPLAYBACKRATE 19 +#define WODM_BREAKLOOP 20 +// #if (WINVER >= 0x030B) +#define WODM_MAPPER_STATUS (DRVM_MAPPER_STATUS + 0) +#define WAVEOUT_MAPPER_STATUS_DEVICE 0 +#define WAVEOUT_MAPPER_STATUS_MAPPED 1 +#define WAVEOUT_MAPPER_STATUS_FORMAT 2 +// #endif /* WINVER >= 0x030B */ +#define WODM_BUSY 21 + +// messages sent to widMessage() entry-point function +#define WIDM_GETNUMDEVS 50 +#define WIDM_GETDEVCAPS 51 +#define WIDM_OPEN 52 +#define WIDM_CLOSE 53 +#define WIDM_PREPARE 54 +#define WIDM_UNPREPARE 55 +#define WIDM_ADDBUFFER 56 +#define WIDM_START 57 +#define WIDM_STOP 58 +#define WIDM_RESET 59 +#define WIDM_GETPOS 60 +// #if (WINVER >= 0x030B) +#define WIDM_MAPPER_STATUS (DRVM_MAPPER_STATUS + 0) +#define WAVEIN_MAPPER_STATUS_DEVICE 0 +#define WAVEIN_MAPPER_STATUS_MAPPED 1 +#define WAVEIN_MAPPER_STATUS_FORMAT 2 +// #endif /* WINVER >= 0x30B */ + +#endif // ifndef MMNOWAVEDEV + + +#ifndef MMNOMIDIDEV +/**************************************************************************** + + MIDI device driver support + +****************************************************************************/ + +// maximum number of MIDI device drivers loaded +#ifndef NOWIN31 +#define MAXMIDIDRIVERS 10 +#else +#define MAXMIDIDRIVERS 4 +#endif + +#define MODM_USER DRVM_USER +#define MIDM_USER DRVM_USER +#define MODM_MAPPER DRVM_MAPPER +#define MIDM_MAPPER DRVM_MAPPER + +#define MODM_INIT DRVM_INIT +#define MIDM_INIT DRVM_INIT + +#ifndef MMNOMIDI // This protects the definition of HMIDI in WINMM.H + // Win 3.1 works the same way +typedef struct midiopenstrmid_tag { + DWORD dwStreamID; + UINT uDeviceID; +} MIDIOPENSTRMID; +// MIDI input and output device open information structure +typedef struct midiopendesc_tag { + HMIDI hMidi; // handle + DWORD dwCallback; // callback + DWORD dwInstance; // app's private instance information + DWORD cIds; // If stream open, # stream ids + MIDIOPENSTRMID rgIds[1]; // Array of device ID's (actually [cIds]) +} MIDIOPENDESC; +typedef MIDIOPENDESC FAR *LPMIDIOPENDESC; +#endif // MMNOMIDI + + +/* Flags for MODM_OPEN */ +#define MIDI_IO_PACKED 0x00000000L /* Compatibility mode */ +#define MIDI_IO_COOKED 0x00000002L + +// messages sent to modMessage() entry-point function +#define MODM_GETNUMDEVS 1 +#define MODM_GETDEVCAPS 2 +#define MODM_OPEN 3 +#define MODM_CLOSE 4 +#define MODM_PREPARE 5 +#define MODM_UNPREPARE 6 +#define MODM_DATA 7 +#define MODM_LONGDATA 8 +#define MODM_RESET 9 +#define MODM_GETVOLUME 10 +#define MODM_SETVOLUME 11 +#define MODM_CACHEPATCHES 12 +#define MODM_CACHEDRUMPATCHES 13 + +#if (WINVER >= 0x400) +#define MODM_STRMDATA 14 +#define MODM_GETPOS 17 +#define MODM_PAUSE 18 +#define MODM_RESTART 19 +#define MODM_STOP 20 +#define MODM_PROPERTIES 21 +#define MODM_RECONFIGURE (MODM_USER+0x0768) +#endif + + +// messages sent to midMessage() entry-point function +#define MIDM_GETNUMDEVS 53 +#define MIDM_GETDEVCAPS 54 +#define MIDM_OPEN 55 +#define MIDM_CLOSE 56 +#define MIDM_PREPARE 57 +#define MIDM_UNPREPARE 58 +#define MIDM_ADDBUFFER 59 +#define MIDM_START 60 +#define MIDM_STOP 61 +#define MIDM_RESET 62 + +#endif // ifndef MMNOMIDIDEV + + +#ifndef MMNOAUXDEV +/**************************************************************************** + + Auxiliary audio device driver support + +****************************************************************************/ + +// maximum number of auxiliary device drivers loaded +#ifndef NOWIN31 +#define MAXAUXDRIVERS 10 +#else +#define MAXAUXDRIVERS 4 +#endif + +// messages sent to auxMessage() entry-point function +#define AUXDM_GETNUMDEVS 3 +#define AUXDM_GETDEVCAPS 4 +#define AUXDM_GETVOLUME 5 +#define AUXDM_SETVOLUME 6 + +#endif // ifndef MMNOAUXDEV + +// #if (WINVER >= 0x030B) +#ifndef MMNOMIXERDEV + +#ifndef MAXMIXERDRIVERS + +// +// maximum number of mixer drivers that can be loaded by MSMIXMGR.DLL +// +#define MAXMIXERDRIVERS 10 + + +// +// mixer device open information structure +// +// +typedef struct tMIXEROPENDESC +{ + HMIXER hmx; // handle that will be used + LPVOID pReserved0; // reserved--driver should ignore + DWORD dwCallback; // callback + DWORD dwInstance; // app's private instance information + +} MIXEROPENDESC, *PMIXEROPENDESC, FAR *LPMIXEROPENDESC; + + + +// +// +// +// +#define MXDM_INIT 100 +#define MXDM_USER DRV_USER + +#define MXDM_BASE (1) +#define MXDM_GETNUMDEVS (MXDM_BASE + 0) +#define MXDM_GETDEVCAPS (MXDM_BASE + 1) +#define MXDM_OPEN (MXDM_BASE + 2) +#define MXDM_CLOSE (MXDM_BASE + 3) +#define MXDM_GETLINEINFO (MXDM_BASE + 4) +#define MXDM_GETLINECONTROLS (MXDM_BASE + 5) +#define MXDM_GETCONTROLDETAILS (MXDM_BASE + 6) +#define MXDM_SETCONTROLDETAILS (MXDM_BASE + 7) + +#endif // MAXMIXERDRIVERS + +#endif // MMNOMIXERDEV +// #endif /* ifdef WINVER >= 0x030B */ + +#if !defined(MMNOTIMERDEV) +/**************************************************************************** + + Timer device driver support + +****************************************************************************/ + +typedef struct timerevent_tag { + WORD wDelay; // delay required + WORD wResolution; // resolution required + LPTIMECALLBACK lpFunction; // ptr to callback function + DWORD dwUser; // user DWORD + WORD wFlags; // defines how to program event + WORD wReserved1; // structure packing +} TIMEREVENT; +typedef TIMEREVENT FAR *LPTIMEREVENT; + +// messages sent to tddMessage() function +#define TDD_KILLTIMEREVENT (DRV_RESERVED+0) // indices into a table of +#define TDD_SETTIMEREVENT (DRV_RESERVED+4) // functions; thus offset by +#define TDD_GETSYSTEMTIME (DRV_RESERVED+8) // four each time... +#define TDD_GETDEVCAPS (DRV_RESERVED+12) // room for future expansion +#define TDD_BEGINMINPERIOD (DRV_RESERVED+16) // room for future expansion +#define TDD_ENDMINPERIOD (DRV_RESERVED+20) // room for future expansion + +#endif // ifndef MMNOTIMERDEV + + +#ifndef MMNOJOYDEV +/**************************************************************************** + + Joystick device driver support + +****************************************************************************/ + +/* RegisterWindowMessage with this to get msg id of config changes */ +#define JOY_CONFIGCHANGED_MSGSTRING "MSJSTICK_VJOYD_MSGSTR" + +/* pre-defined joystick types */ +#define JOY_HW_NONE 0 +#define JOY_HW_CUSTOM 1 +#define JOY_HW_2A_2B_GENERIC 2 +#define JOY_HW_2A_4B_GENERIC 3 +#define JOY_HW_2B_GAMEPAD 4 +#define JOY_HW_2B_FLIGHTYOKE 5 +#define JOY_HW_2B_FLIGHTYOKETHROTTLE 6 +#define JOY_HW_3A_2B_GENERIC 7 +#define JOY_HW_3A_4B_GENERIC 8 +#define JOY_HW_4B_GAMEPAD 9 +#define JOY_HW_4B_FLIGHTYOKE 10 +#define JOY_HW_4B_FLIGHTYOKETHROTTLE 11 +#define JOY_HW_LASTENTRY 12 + +/* calibration flags */ +#define JOY_ISCAL_XY 0x00000001l /* XY are calibrated */ +#define JOY_ISCAL_Z 0x00000002l /* Z is calibrated */ +#define JOY_ISCAL_R 0x00000004l /* R is calibrated */ +#define JOY_ISCAL_U 0x00000008l /* U is calibrated */ +#define JOY_ISCAL_V 0x00000010l /* V is calibrated */ +#define JOY_ISCAL_POV 0x00000020l /* POV is calibrated */ + +/* point of view constants */ +#define JOY_POV_NUMDIRS 4 +#define JOY_POVVAL_FORWARD 0 +#define JOY_POVVAL_BACKWARD 1 +#define JOY_POVVAL_LEFT 2 +#define JOY_POVVAL_RIGHT 3 + +/* Specific settings for joystick hardware */ +#define JOY_HWS_HASZ 0x00000001l /* has Z info? */ +#define JOY_HWS_HASPOV 0x00000002l /* point of view hat present */ +#define JOY_HWS_POVISBUTTONCOMBOS 0x00000004l /* pov done through combo of buttons */ +#define JOY_HWS_POVISPOLL 0x00000008l /* pov done through polling */ +#define JOY_HWS_ISYOKE 0x00000010l /* joystick is a flight yoke */ +#define JOY_HWS_ISGAMEPAD 0x00000020l /* joystick is a game pad */ +#define JOY_HWS_ISCARCTRL 0x00000040l /* joystick is a car controller */ +/* X defaults to J1 X axis */ +#define JOY_HWS_XISJ1Y 0x00000080l /* X is on J1 Y axis */ +#define JOY_HWS_XISJ2X 0x00000100l /* X is on J2 X axis */ +#define JOY_HWS_XISJ2Y 0x00000200l /* X is on J2 Y axis */ +/* Y defaults to J1 Y axis */ +#define JOY_HWS_YISJ1X 0x00000400l /* Y is on J1 X axis */ +#define JOY_HWS_YISJ2X 0x00000800l /* Y is on J2 X axis */ +#define JOY_HWS_YISJ2Y 0x00001000l /* Y is on J2 Y axis */ +/* Z defaults to J2 Y axis */ +#define JOY_HWS_ZISJ1X 0x00002000l /* Z is on J1 X axis */ +#define JOY_HWS_ZISJ1Y 0x00004000l /* Z is on J1 Y axis */ +#define JOY_HWS_ZISJ2X 0x00008000l /* Z is on J2 X axis */ +/* POV defaults to J2 Y axis, if it is not button based */ +#define JOY_HWS_POVISJ1X 0x00010000l /* pov done through J1 X axis */ +#define JOY_HWS_POVISJ1Y 0x00020000l /* pov done through J1 Y axis */ +#define JOY_HWS_POVISJ2X 0x00040000l /* pov done through J2 X axis */ +/* R defaults to J2 X axis */ +#define JOY_HWS_HASR 0x00080000l /* has R (4th axis) info */ +#define JOY_HWS_RISJ1X 0x00100000l /* R done through J1 X axis */ +#define JOY_HWS_RISJ1Y 0x00200000l /* R done through J1 Y axis */ +#define JOY_HWS_RISJ2Y 0x00400000l /* R done through J2 X axis */ +/* U & V for future hardware */ +#define JOY_HWS_HASU 0x00800000l /* has U (5th axis) info */ +#define JOY_HWS_HASV 0x01000000l /* has V (6th axis) info */ + +/* Usage settings */ +#define JOY_US_HASRUDDER 0x00000001l /* joystick configured with rudder */ +#define JOY_US_PRESENT 0x00000002l /* is joystick actually present? */ +#define JOY_US_ISOEM 0x00000004l /* joystick is an OEM defined type */ + +/* struct for storing x,y, z, and rudder values */ +typedef struct joypos_tag { + DWORD dwX; + DWORD dwY; + DWORD dwZ; + DWORD dwR; + DWORD dwU; + DWORD dwV; +} JOYPOS, FAR *LPJOYPOS; + +/* struct for storing ranges */ +typedef struct joyrange_tag { + JOYPOS jpMin; + JOYPOS jpMax; + JOYPOS jpCenter; +} JOYRANGE,FAR *LPJOYRANGE; + +typedef struct joyreguservalues_tag { + DWORD dwTimeOut; /* value at which to timeout joystick polling */ + JOYRANGE jrvRanges; /* range of values app wants returned for axes */ + JOYPOS jpDeadZone; /* area around center to be considered + as "dead". specified as a percentage + (0-100). Only X & Y handled by system driver */ +} JOYREGUSERVALUES, FAR *LPJOYREGUSERVALUES; + +typedef struct joyreghwsettings_tag { + DWORD dwFlags; + DWORD dwNumButtons; /* number of buttons */ +} JOYREGHWSETTINGS, FAR *LPJOYHWSETTINGS; + +/* range of values returned by the hardware (filled in by calibration) */ +typedef struct joyreghwvalues_tag { + JOYRANGE jrvHardware; /* values returned by hardware */ + DWORD dwPOVValues[JOY_POV_NUMDIRS];/* POV values returned by hardware */ + DWORD dwCalFlags; /* what has been calibrated */ +} JOYREGHWVALUES, FAR *LPJOYREGHWVALUES; + +/* hardware configuration */ +typedef struct joyreghwconfig_tag { + JOYREGHWSETTINGS hws; /* hardware settings */ + DWORD dwUsageSettings;/* usage settings */ + JOYREGHWVALUES hwv; /* values returned by hardware */ + DWORD dwType; /* type of joystick */ + DWORD dwReserved; /* reserved for OEM drivers */ +} JOYREGHWCONFIG, FAR *LPJOYREGHWCONFIG; + +// joystick calibration info structure +typedef struct joycalibrate_tag { + WORD wXbase; + WORD wXdelta; + WORD wYbase; + WORD wYdelta; + WORD wZbase; + WORD wZdelta; +} JOYCALIBRATE; +typedef JOYCALIBRATE FAR *LPJOYCALIBRATE; + +// prototype for joystick message function +typedef DWORD (JOYDEVMSGPROC)(DWORD, UINT, LONG, LONG); +typedef JOYDEVMSGPROC FAR *LPJOYDEVMSGPROC; + +// messages sent to joystick driver's DriverProc() function +#define JDD_GETNUMDEVS (DRV_RESERVED + 0x0001) +#define JDD_GETDEVCAPS (DRV_RESERVED + 0x0002) +#define JDD_GETPOS (DRV_RESERVED + 0x0101) +#define JDD_SETCALIBRATION (DRV_RESERVED + 0x0102) +#define JDD_CONFIGCHANGED (DRV_RESERVED + 0x0103) +#define JDD_GETPOSEX (DRV_RESERVED + 0x0104) + +#endif // ifndef MMNOJOYDEV + +#ifndef MAKELRESULT +#define MAKELRESULT(low, high) ((LRESULT)MAKELONG(low, high)) +#endif//MAKELRESULT + + +#ifndef MMNOMCIDEV +/**************************************************************************** + + MCI device driver support + +****************************************************************************/ + + +// internal MCI messages +#define MCI_OPEN_DRIVER 0x0801 +#define MCI_CLOSE_DRIVER 0x0802 + +#define MAKEMCIRESOURCE(wRet, wRes) MAKELRESULT((wRet), (wRes)) + +// string return values only used with MAKEMCIRESOURCE +#define MCI_FALSE (MCI_STRING_OFFSET + 19) +#define MCI_TRUE (MCI_STRING_OFFSET + 20) + +// resource string return values +#define MCI_FORMAT_RETURN_BASE MCI_FORMAT_MILLISECONDS_S +#define MCI_FORMAT_MILLISECONDS_S (MCI_STRING_OFFSET + 21) +#define MCI_FORMAT_HMS_S (MCI_STRING_OFFSET + 22) +#define MCI_FORMAT_MSF_S (MCI_STRING_OFFSET + 23) +#define MCI_FORMAT_FRAMES_S (MCI_STRING_OFFSET + 24) +#define MCI_FORMAT_SMPTE_24_S (MCI_STRING_OFFSET + 25) +#define MCI_FORMAT_SMPTE_25_S (MCI_STRING_OFFSET + 26) +#define MCI_FORMAT_SMPTE_30_S (MCI_STRING_OFFSET + 27) +#define MCI_FORMAT_SMPTE_30DROP_S (MCI_STRING_OFFSET + 28) +#define MCI_FORMAT_BYTES_S (MCI_STRING_OFFSET + 29) +#define MCI_FORMAT_SAMPLES_S (MCI_STRING_OFFSET + 30) +#define MCI_FORMAT_TMSF_S (MCI_STRING_OFFSET + 31) + +#define MCI_VD_FORMAT_TRACK_S (MCI_VD_OFFSET + 5) + +#define WAVE_FORMAT_PCM_S (MCI_WAVE_OFFSET + 0) +#define WAVE_MAPPER_S (MCI_WAVE_OFFSET + 1) + +#define MCI_SEQ_MAPPER_S (MCI_SEQ_OFFSET + 5) +#define MCI_SEQ_FILE_S (MCI_SEQ_OFFSET + 6) +#define MCI_SEQ_MIDI_S (MCI_SEQ_OFFSET + 7) +#define MCI_SEQ_SMPTE_S (MCI_SEQ_OFFSET + 8) +#define MCI_SEQ_FORMAT_SONGPTR_S (MCI_SEQ_OFFSET + 9) +#define MCI_SEQ_NONE_S (MCI_SEQ_OFFSET + 10) +#define MIDIMAPPER_S (MCI_SEQ_OFFSET + 11) + +#define MCI_TABLE_NOT_PRESENT ((UINT)-1) +// parameters for internal version of MCI_OPEN message sent from +// mciOpenDevice() to the driver +typedef struct { + MCIDEVICEID wDeviceID; // device ID + LPCWSTR lpstrParams; // parameter string for entry in SYSTEM.INI + UINT wCustomCommandTable; // custom command table ((-1) if none) + // filled in by the driver + UINT wType; // driver type + // filled in by the driver +} MCI_OPEN_DRIVER_PARMS; +typedef MCI_OPEN_DRIVER_PARMS FAR * LPMCI_OPEN_DRIVER_PARMS; + +// maximum length of an MCI device type +#define MCI_MAX_DEVICE_TYPE_LENGTH 80 + +// flags for mciSendCommandInternal() which direct mciSendString() how to +// interpret the return value +#define MCI_RESOURCE_RETURNED 0x00010000 // resource ID +#define MCI_COLONIZED3_RETURN 0x00020000 // colonized ID, 3 bytes data +#define MCI_COLONIZED4_RETURN 0x00040000 // colonized ID, 4 bytes data +#define MCI_INTEGER_RETURNED 0x00080000 // integer conversion needed +#define MCI_RESOURCE_DRIVER 0x00100000 // driver owns returned resource + +// invalid command table ID +#define MCI_NO_COMMAND_TABLE ((UINT)(-1)) + +// command table information type tags +#define MCI_COMMAND_HEAD 0 +#define MCI_STRING 1 +#define MCI_INTEGER 2 +#define MCI_END_COMMAND 3 +#define MCI_RETURN 4 +#define MCI_FLAG 5 +#define MCI_END_COMMAND_LIST 6 +#define MCI_RECT 7 +#define MCI_CONSTANT 8 +#define MCI_END_CONSTANT 9 +#define MCI_HWND 10 +#define MCI_HPAL 11 +#define MCI_HDC 12 + +// function prototypes for MCI driver functions +DWORD APIENTRY mciGetDriverData(MCIDEVICEID wDeviceID); +BOOL APIENTRY mciSetDriverData(MCIDEVICEID wDeviceID, DWORD dwData); +UINT APIENTRY mciDriverYield (MCIDEVICEID wDeviceID); +BOOL APIENTRY mciDriverNotify (HANDLE hwndCallback, MCIDEVICEID wDeviceID, + UINT uStatus); +UINT APIENTRY mciLoadCommandResource(HANDLE hInstance, + LPCWSTR lpResName, UINT wType); +BOOL APIENTRY mciFreeCommandResource(UINT wTable); + +#endif // ifndef MMNOMCIDEV + + +#ifndef MMNOTASKDEV +/***************************************************************************** + + Task support + +*****************************************************************************/ + +// error return values +#define TASKERR_NOTASKSUPPORT 1 +#define TASKERR_OUTOFMEMORY 2 + +// task support function prototypes +typedef VOID (TASKCALLBACK) (DWORD dwInst); + +typedef TASKCALLBACK FAR *LPTASKCALLBACK; + +UINT APIENTRY mmTaskCreate(LPTASKCALLBACK lpfn, HANDLE FAR * lph, DWORD dwInst); +VOID APIENTRY mmTaskBlock(DWORD h); +BOOL APIENTRY mmTaskSignal(DWORD h); +VOID APIENTRY mmTaskYield(VOID); +DWORD APIENTRY mmGetCurrentTask(VOID); + +#endif // endif MMNOTASKDEV + +#define MMDDKINC + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#include "poppack.h" /* Revert to default packing */ + +#endif /* _INC_MMDDK */ |