/*++ Copyright (c) 1990 Microsoft Corporation Module Name: lazyrite.c Abstract: This module implements the lazy writer for the Cache subsystem. Author: Tom Miller [TomM] 22-July-1990 Revision History: --*/ #include "cc.h" // // The Bug check file id for this module // #define BugCheckFileId (CACHE_BUG_CHECK_LAZYRITE) // // Define our debug constant // #define me 0x00000020 // // Local support routines // PWORK_QUEUE_ENTRY CcReadWorkQueue ( ); VOID CcLazyWriteScan ( ); VOID CcScheduleLazyWriteScan ( ) /*++ Routine Description: This routine may be called to schedule the next lazy writer scan, during which lazy write and lazy close activity is posted to other worker threads. Callers should acquire the lazy writer spin lock to see if the scan is currently active, and then call this routine still holding the spin lock if not. One special call is used at the end of the lazy write scan to propagate lazy write active once we go active. This call is "the" scan thread, and it can therefore safely schedule the next scan without taking out the spin lock. Arguments: None Return Value: None. --*/ { // // It is important to set the active flag TRUE first for the propagate // case, because it is conceivable that once the timer is set, another // thread could actually run and make the scan go idle before we then // jam the flag TRUE. // // When going from idle to active, we delay a little longer to let the // app finish saving its file. // if (LazyWriter.ScanActive) { KeSetTimer( &LazyWriter.ScanTimer, CcIdleDelay, &LazyWriter.ScanDpc ); } else { LazyWriter.ScanActive = TRUE; KeSetTimer( &LazyWriter.ScanTimer, CcFirstDelay, &LazyWriter.ScanDpc ); } } VOID CcScanDpc ( IN PKDPC Dpc, IN PVOID DeferredContext, IN PVOID SystemArgument1, IN PVOID SystemArgument2 ) /*++ Routine Description: This is the Dpc routine which runs when the scan timer goes off. It simply posts an element for an Ex Worker thread to do the scan. Arguments: (All are ignored) Return Value: None. --*/ { PWORK_QUEUE_ENTRY WorkQueueEntry; UNREFERENCED_PARAMETER(Dpc); UNREFERENCED_PARAMETER(DeferredContext); UNREFERENCED_PARAMETER(SystemArgument1); UNREFERENCED_PARAMETER(SystemArgument2); WorkQueueEntry = CcAllocateWorkQueueEntry(); // // If we failed to allocate a WorkQueueEntry, things must // be in pretty bad shape. However, all we have to do is // say we are not active, and wait for another event to // wake things up again. // if (WorkQueueEntry == NULL) { LazyWriter.ScanActive = FALSE; } else { // // Otherwise post a work queue entry to do the scan. // WorkQueueEntry->Function = (UCHAR)LazyWriteScan; CcPostWorkQueue( WorkQueueEntry, &CcRegularWorkQueue ); } } VOID CcLazyWriteScan ( ) /*++ Routine Description: This routine implements the Lazy Writer scan for dirty data to flush or any other work to do (lazy close). This routine is scheduled by calling CcScheduleLazyWriteScan. Arguments: None. Return Value: None. --*/ { ULONG PagesToWrite, ForegroundRate, EstimatedDirtyNextInterval; PSHARED_CACHE_MAP SharedCacheMap, FirstVisited; KIRQL OldIrql; ULONG LoopsWithLockHeld = 0; BOOLEAN AlreadyMoved = FALSE; // // Top of Lazy Writer scan. // try { // // If there is no work to do, then we will go inactive, and return. // ExAcquireSpinLock( &CcMasterSpinLock, &OldIrql ); if ((CcTotalDirtyPages == 0) && !LazyWriter.OtherWork) { LazyWriter.ScanActive = FALSE; ExReleaseSpinLock( &CcMasterSpinLock, OldIrql ); return; } // // Acquire the Lazy Writer spinlock, calculate the next sweep time // stamp, then update all relevant fields for the next time around. // Also we can clear the OtherWork flag. // LazyWriter.OtherWork = FALSE; // // Assume we will write our usual fraction of dirty pages. Do not do the // divide if there is not enough dirty pages, or else we will never write // the last few pages. // PagesToWrite = CcTotalDirtyPages; if (PagesToWrite > LAZY_WRITER_MAX_AGE_TARGET) { PagesToWrite /= LAZY_WRITER_MAX_AGE_TARGET; } // // Estimate the rate of dirty pages being produced in the foreground. // This is the total number of dirty pages now plus the number of dirty // pages we scheduled to write last time, minus the number of dirty // pages we have now. Throw out any cases which would not produce a // positive rate. // ForegroundRate = 0; if ((CcTotalDirtyPages + CcPagesWrittenLastTime) > CcDirtyPagesLastScan) { ForegroundRate = (CcTotalDirtyPages + CcPagesWrittenLastTime) - CcDirtyPagesLastScan; } // // If we estimate that we will exceed our dirty page target by the end // of this interval, then we must write more. Try to arrive on target. // EstimatedDirtyNextInterval = CcTotalDirtyPages - PagesToWrite + ForegroundRate; if (EstimatedDirtyNextInterval > CcDirtyPageTarget) { PagesToWrite += EstimatedDirtyNextInterval - CcDirtyPageTarget; } // // Now save away the number of dirty pages and the number of pages we // just calculated to write. // CcDirtyPagesLastScan = CcTotalDirtyPages; CcPagesYetToWrite = CcPagesWrittenLastTime = PagesToWrite; // // Loop to flush enough Shared Cache Maps to write the number of pages // we just calculated. // SharedCacheMap = CONTAINING_RECORD( CcLazyWriterCursor.SharedCacheMapLinks.Flink, SHARED_CACHE_MAP, SharedCacheMapLinks ); DebugTrace( 0, me, "Start of Lazy Writer Scan\n", 0 ); // // Normally we would just like to visit every Cache Map once on each scan, // so the scan will terminate normally when we return to FirstVisited. But // in the off chance that FirstVisited gets deleted, we are guaranteed to stop // when we get back to our own listhead. // FirstVisited = NULL; while ((SharedCacheMap != FirstVisited) && (&SharedCacheMap->SharedCacheMapLinks != &CcLazyWriterCursor.SharedCacheMapLinks)) { if (FirstVisited == NULL) { FirstVisited = SharedCacheMap; } // // Skip the SharedCacheMap if a write behind request is // already queued, write behind has been disabled, or // if there is no work to do (either dirty data to be written // or a delete is required). // // Note that for streams where modified writing is disabled, we // need to take out Bcbs exclusive, which serializes with foreground // activity. Therefore we use a special counter in the SharedCacheMap // to only service these once every n intervals. // // Skip temporary files unless we currently could not write 196KB // if (!FlagOn(SharedCacheMap->Flags, WRITE_QUEUED | IS_CURSOR) && (((PagesToWrite != 0) && (SharedCacheMap->DirtyPages != 0) && (((++SharedCacheMap->LazyWritePassCount & 0xF) == 0) || !FlagOn(SharedCacheMap->Flags, MODIFIED_WRITE_DISABLED) || (CcCapturedSystemSize == MmSmallSystem) || (SharedCacheMap->DirtyPages >= (4 * (MAX_WRITE_BEHIND / PAGE_SIZE)))) && (!FlagOn(SharedCacheMap->FileObject->Flags, FO_TEMPORARY_FILE) || !CcCanIWrite(SharedCacheMap->FileObject, 0x30000, FALSE, MAXUCHAR))) || (SharedCacheMap->OpenCount == 0))) { PWORK_QUEUE_ENTRY WorkQueueEntry; // // If this is a metadata stream with at least 4 times // the maximum write behind I/O size, then let's tell // this guy to write 1/8 of his dirty data on this pass // so it doesn't build up. // // Else assume we can write everything (PagesToWrite only affects // metadata streams - otherwise writing is controlled by the Mbcb). // SharedCacheMap->PagesToWrite = SharedCacheMap->DirtyPages; if (FlagOn(SharedCacheMap->Flags, MODIFIED_WRITE_DISABLED) && (SharedCacheMap->PagesToWrite >= (4 * (MAX_WRITE_BEHIND / PAGE_SIZE))) && (CcCapturedSystemSize != MmSmallSystem)) { SharedCacheMap->PagesToWrite /= 8; } // // See if he exhausts the number of pages to write. (We // keep going in case there are any closes to do.) // if ((SharedCacheMap->PagesToWrite >= PagesToWrite) && !AlreadyMoved) { // // If we met our write quota on a given SharedCacheMap, then make sure // we start at him on the next scan, unless it is a metadata stream. // RemoveEntryList( &CcLazyWriterCursor.SharedCacheMapLinks ); // // For Metadata streams, set up to resume on the next stream on the // next scan. // if (FlagOn(SharedCacheMap->Flags, MODIFIED_WRITE_DISABLED)) { InsertHeadList( &SharedCacheMap->SharedCacheMapLinks, &CcLazyWriterCursor.SharedCacheMapLinks ); // // For other streams, set up to resume on the same stream on the // next scan. // } else { InsertTailList( &SharedCacheMap->SharedCacheMapLinks, &CcLazyWriterCursor.SharedCacheMapLinks ); } PagesToWrite = 0; AlreadyMoved = TRUE; } else { PagesToWrite -= SharedCacheMap->PagesToWrite; } // // Otherwise show we are actively writing, and keep it in the dirty // list. // SetFlag(SharedCacheMap->Flags, WRITE_QUEUED); SharedCacheMap->DirtyPages += 1; ExReleaseSpinLock( &CcMasterSpinLock, OldIrql ); // // Queue the request to do the work to a worker thread. // WorkQueueEntry = CcAllocateWorkQueueEntry(); // // If we failed to allocate a WorkQueueEntry, things must // be in pretty bad shape. However, all we have to do is // break out of our current loop, and try to go back and // delay a while. Even if the current guy should have gone // away when we clear WRITE_QUEUED, we will find him again // in the LW scan. // if (WorkQueueEntry == NULL) { ExAcquireSpinLock( &CcMasterSpinLock, &OldIrql ); ClearFlag(SharedCacheMap->Flags, WRITE_QUEUED); SharedCacheMap->DirtyPages -= 1; break; } WorkQueueEntry->Function = (UCHAR)WriteBehind; WorkQueueEntry->Parameters.Write.SharedCacheMap = SharedCacheMap; // // Post it to the regular work queue. // ExAcquireSpinLock( &CcMasterSpinLock, &OldIrql ); SharedCacheMap->DirtyPages -= 1; CcPostWorkQueue( WorkQueueEntry, &CcRegularWorkQueue ); LoopsWithLockHeld = 0; // // Make sure we occassionally drop the lock. Set WRITE_QUEUED // to keep the guy from going away. // } else if ((++LoopsWithLockHeld >= 20) && !FlagOn(SharedCacheMap->Flags, WRITE_QUEUED | IS_CURSOR)) { SetFlag(SharedCacheMap->Flags, WRITE_QUEUED); SharedCacheMap->DirtyPages += 1; ExReleaseSpinLock( &CcMasterSpinLock, OldIrql ); LoopsWithLockHeld = 0; ExAcquireSpinLock( &CcMasterSpinLock, &OldIrql ); ClearFlag(SharedCacheMap->Flags, WRITE_QUEUED); SharedCacheMap->DirtyPages -= 1; } // // Now loop back. // SharedCacheMap = CONTAINING_RECORD( SharedCacheMap->SharedCacheMapLinks.Flink, SHARED_CACHE_MAP, SharedCacheMapLinks ); } DebugTrace( 0, me, "End of Lazy Writer Scan\n", 0 ); // // Now we can release the global list and loop back, per chance to sleep. // ExReleaseSpinLock( &CcMasterSpinLock, OldIrql ); // // Now go ahead and schedule the next scan. // CcScheduleLazyWriteScan(); // // Basically, the Lazy Writer thread should never get an exception, // so we put a try-except around it that bug checks one way or the other. // Better we bug check here than worry about what happens if we let one // get by. // } except( CcExceptionFilter( GetExceptionCode() )) { CcBugCheck( GetExceptionCode(), 0, 0 ); } } // // Internal support routine // LONG CcExceptionFilter ( IN NTSTATUS ExceptionCode ) /*++ Routine Description: This is the standard exception filter for worker threads which simply calls an FsRtl routine to see if an expected status is being raised. If so, the exception is handled, else we bug check. Arguments: ExceptionCode - the exception code which was raised. Return Value: EXCEPTION_EXECUTE_HANDLER if expected, else a Bug Check occurs. --*/ { DebugTrace(0, 0, "CcExceptionFilter %08lx\n", ExceptionCode); // DbgBreakPoint(); if (FsRtlIsNtstatusExpected( ExceptionCode )) { return EXCEPTION_EXECUTE_HANDLER; } else { return EXCEPTION_CONTINUE_SEARCH; } } // // Internal support routine // VOID FASTCALL CcPostWorkQueue ( IN PWORK_QUEUE_ENTRY WorkQueueEntry, IN PLIST_ENTRY WorkQueue ) /*++ Routine Description: This routine queues a WorkQueueEntry, which has been allocated and initialized by the caller, to the WorkQueue for FIFO processing by the work threads. Arguments: WorkQueueEntry - supplies a pointer to the entry to queue Return Value: None --*/ { KIRQL OldIrql; PLIST_ENTRY WorkerThreadEntry = NULL; ASSERT(FIELD_OFFSET(WORK_QUEUE_ITEM, List) == 0); DebugTrace(+1, me, "CcPostWorkQueue:\n", 0 ); DebugTrace( 0, me, " WorkQueueEntry = %08lx\n", WorkQueueEntry ); // // Queue the entry to the respective work queue. // ExAcquireFastLock( &CcWorkQueueSpinlock, &OldIrql ); InsertTailList( WorkQueue, &WorkQueueEntry->WorkQueueLinks ); // // Now, if we have any more idle threads we can use, then activate // one. // if (!IsListEmpty(&CcIdleWorkerThreadList)) { WorkerThreadEntry = RemoveHeadList( &CcIdleWorkerThreadList ); } ExReleaseFastLock( &CcWorkQueueSpinlock, OldIrql ); if (WorkerThreadEntry != NULL) { // // I had to peak in the sources to verify that this routine // is a noop if the Flink is not NULL. Sheeeeit! // ((PWORK_QUEUE_ITEM)WorkerThreadEntry)->List.Flink = NULL; ExQueueWorkItem( (PWORK_QUEUE_ITEM)WorkerThreadEntry, CriticalWorkQueue ); } // // And return to our caller // DebugTrace(-1, me, "CcPostWorkQueue -> VOID\n", 0 ); return; } // // Internal support routine // VOID CcWorkerThread ( PVOID ExWorkQueueItem ) /*++ Routine Description: This is worker thread routine for processing cache manager work queue entries. Arguments: ExWorkQueueItem - The work item used for this thread Return Value: None --*/ { KIRQL OldIrql; PWORK_QUEUE_ENTRY WorkQueueEntry; BOOLEAN RescanOk = FALSE; ASSERT(FIELD_OFFSET(WORK_QUEUE_ENTRY, WorkQueueLinks) == 0); while (TRUE) { ExAcquireFastLock( &CcWorkQueueSpinlock, &OldIrql ); // // First see if there is something in the express queue. // if (!IsListEmpty(&CcExpressWorkQueue)) { WorkQueueEntry = (PWORK_QUEUE_ENTRY)RemoveHeadList( &CcExpressWorkQueue ); // // If there was nothing there, then try the regular queue. // } else if (!IsListEmpty(&CcRegularWorkQueue)) { WorkQueueEntry = (PWORK_QUEUE_ENTRY)RemoveHeadList( &CcRegularWorkQueue ); // // Else we can break and go idle. // } else { break; } ExReleaseFastLock( &CcWorkQueueSpinlock, OldIrql ); // // Process the entry within a try-except clause, so that any errors // will cause us to continue after the called routine has unwound. // try { switch (WorkQueueEntry->Function) { // // A read ahead or write behind request has been nooped (but // left in the queue to keep the semaphore count right). // case Noop: break; // // Perform read ahead // case ReadAhead: DebugTrace( 0, me, "CcWorkerThread Read Ahead FileObject = %08lx\n", WorkQueueEntry->Parameters.Read.FileObject ); CcPerformReadAhead( WorkQueueEntry->Parameters.Read.FileObject ); break; // // Perform write behind // case WriteBehind: DebugTrace( 0, me, "CcWorkerThread WriteBehind SharedCacheMap = %08lx\n", WorkQueueEntry->Parameters.Write.SharedCacheMap ); RescanOk = (BOOLEAN)NT_SUCCESS(CcWriteBehind( WorkQueueEntry->Parameters.Write.SharedCacheMap )); break; // // Perform Lazy Write Scan // case LazyWriteScan: DebugTrace( 0, me, "CcWorkerThread Lazy Write Scan\n", 0 ); CcLazyWriteScan(); break; } } except( CcExceptionFilter( GetExceptionCode() )) { NOTHING; } CcFreeWorkQueueEntry( WorkQueueEntry ); } // // No more work. Requeue our worker thread entry and get out. // InsertTailList( &CcIdleWorkerThreadList, &((PWORK_QUEUE_ITEM)ExWorkQueueItem)->List ); ExReleaseFastLock( &CcWorkQueueSpinlock, OldIrql ); if (!IsListEmpty(&CcDeferredWrites) && (CcTotalDirtyPages >= 20) && RescanOk) { CcLazyWriteScan(); } return; }