;***********************************************************************
; HT Communications DSU41/42 56kbps Digital Modem WindowsNT Setup File.
;***********************************************************************
[Identification]
    OptionType = NetAdapter

;***********************************************************************
;
;***********************************************************************
[PlatformsSupported]
    ISA
    EISA
    "Jazz-Internal Bus"

;***********************************************************************
;
;***********************************************************************
[Options]
    HTDSU41
;   HTDSU42 FIXME - The HTDSU42 does not yet support HDLC framing

;***********************************************************************
;
;***********************************************************************
[FileConstants]
    InfName                 = "OEMHTDSU.INF"
    UtilityInf              = "UTILITY.INF"
    ParamInf                = "NCPARAM.INF"
    subroutineinf           = "SUBROUTN.INF"
    SoftwareType            = "driver"
    Exit_Code               = 0
    NetEventDLL             = "%SystemRoot%\System32\netevent.dll"
    IoLogMsgDLL             = "%SystemRoot%\System32\IoLogMsg.dll"
    Manufacturer            = "HT Communications"
    ProductMajorVersion     = "3"
    ProductMinorVersion     = "1"
    ProductVersion          = $(ProductMajorVersion)"."$(ProductMinorVersion)
    ProductSoftwareName     = "HTDSU41"
    ProductSoftwareImagePath = "\SystemRoot\System32\drivers\HTDSU41.sys"
    NetRuleSoftwareType     = "HTDSU41Sys HTDSU41Driver"
    NetRuleSoftwareUse      = $(SoftwareType)
    NetRuleSoftwareBindForm = """HTDSU41Sys"" yes no container"
    NetRuleSoftwareClass    = {"HTDSU41Driver basic"}
    NetRuleSoftwareBindable = {"HTDSU41Driver HTDSU41Adapter non exclusive 100"}
    ProductHardwareName     = "HTDSU41"
    NetRuleHardwareBindForm = " yes yes container"
    NetRuleHardwareHTDSU41Type = "HTDSU41 HTDSU41Adapter"
    NetRuleHardwareHTDSU41Class = {"HTDSU41Adapter basic"}
    BindableHTDSU41Txt      = {"HTDSU41Driver HTDSU41Adapter non exclusive 100"}
    DeviceMap               = "HARDWARE\DEVICEMAP"
    TapiDevices             = "TAPI DEVICES"
    TapiDeviceKey           = $(ProductHardwareName)
    TapiMediaType           = "Sw56_"
    ProductKeyName          = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"+
                              $(ProductSoftwareName)"\CurrentVersion"
    ParamKeyName            = $(!NTN_ServiceBase)"\"$(ProductHardwareName)+
                              "\Parameters"

;   FIXME - default to dialup line mode = 0 -- leased line = 1
;   In dialup mode we need to write the parameters so RAS/TAPI will bind to us
;   In leased mode we need to write the parameters so NDIS/WAN will bind to us
;   Right now this file only supports dialup mode - leased line changes are needed 
    LineType                = 0

;   FIXME - Set to zero before release
    DebugFlags              = 0

    RAM_Addr_List           = {851968, 917504, 913408, 847872}
    IRQ_List                = {15, 12, 11, 10, 4, 3}

;   Default here is 1=57.6kbps 0=max 2=38.4k 3=19.2k 4=9.6k
    Rate_Strings            = {"Max kbps", "57.6 kbps", "38.4 kbps", "19.2 kpbs", "9.6 kbps"}
    Line_Rates              = {0, 1, 2, 3, 4}
    LineRate                = 0

;***********************************************************************
;
;***********************************************************************
[GeneralConstants]
    from                    = ""
    to                      = ""
    ExitCodeOk              = 0
    ExitCodeCancel          = 1
    ExitCodeFatal           = 2
    KeyNull                 = ""
    MAXIMUM_ALLOWED         = 33554432
    RegistryErrorIndex      = NO_ERROR
    KeyProduct              = ""
    KeyParameters           = ""
    TRUE                    = 1
    FALSE                   = 0
    NoTitle                 = 0
    ExitState               = "Active"
    OldVersionExisted       = $(FALSE)
    DriverPath              = $(!STF_NTPATH)\drivers

;***********************************************************************
;
;***********************************************************************
[Date]
    Now                     = {} ? $(!LIBHANDLE) GetSystemDate

;***********************************************************************
;
;***********************************************************************
[Identify]
    Read-Syms Identification
    Set Status      = STATUS_SUCCESSFUL
    Set Identifier  = $(OptionType)
    Set Media       = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

;***********************************************************************
;
;***********************************************************************
[ReturnOptions]
    Set Status          = STATUS_FAILED
    Set OptionList      = {}
    Set OptionTextList  = {}
    Set LanguageList    = ^(LanguagesSupported, 1)

    IfContains(i) $($0) in $(LanguageList)
        IfStr(i) $($1) == ""
            GoTo SetOptions
        EndIf
        Set PlatformList = ^(PlatformsSupported, 1)
        IfContains(i) $($1) in $(PlatformList)
            GoTo SetOptions
        Else
            Set Status = STATUS_NOTSUPPORTED
            GoTo ExitReturnOptions
        EndIf
    Else
        Set Status = STATUS_NOLANGUAGE
        GoTo ExitReturnOptions
    EndIf

SetOptions = +
    Set OptionList     = ^(Options, 1)
    Set OptionTextList = ^(OptionsText$($0), 1)
    Set Status         = STATUS_SUCCESSFUL

ExitReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

;***********************************************************************
;
;***********************************************************************
[InstallOption]
    Set Status   = STATUS_FAILED
    Set Option   = $($1)
    Set SrcDir   = $($2)
    Set RasDir   = $($2)
    Set AddCopy  = $($3)
    Set DoCopy   = $($4)
    Set DoConfig = $($5)
    Set LanguageList = ^(LanguagesSupported, 1)

    IfContains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    EndIf
    ;
    ; FIXME - make sure this flag is disabled before shipping
    ;
    Set OldDebugControl = $(!DebugOutputControl)
;    Set !DebugOutputControl = 1

    Set-Subst LF = "\n"

    Read-Syms GeneralConstants
    Read-Syms FileConstants
    Read-Syms DialogConstants$(!STF_LANGUAGE)

    IfStr(i) $(!NTN_Origination) == "NCPA"
        Set Continue = $(OK)
    EndIf

    Read-Syms FileConstants$(!STF_LANGUAGE)
    Detect Date
    Set-Title  $(FunctionTitle)$(Option)

    Set to   = Begin
    Set from = Begin
    Set CommonStatus = STATUS_SUCCESSFUL

    EndWait

;***********************************************************************
;
;***********************************************************************
Begin = +
    Set ActivateDetection = FALSE
    IfStr(i) $(!NTN_InstallMode) == deinstall
        Set StartLabel = RemoveAdapter
    Else-IfStr(i) $(!NTN_InstallMode) == Update
        Set StartLabel = UpgradeSoftware
    Else-IfStr(i) $(!NTN_InstallMode) == bind
        Set StartLabel = BindingAdapter
    Else-IfStr(i) $(!NTN_InstallMode) == configure
        Set StartLabel = ConfigureAdapter
        Set ActivateDetection = TRUE
        Set CommonStatus = STATUS_REBOOT
        IfStr(i) $(ProductKeyName) == $(!NTN_RegBase)
            Debug-Output $(InfName)": Cannot configure the EtherWORKS 3 driver software."
            Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
            IfInt $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output $(InfName)": ShellCode error: cannot get an error string."
                GoTo ShellCodeError
            EndIf
            Set Error = $($R0)
            Set from = end
            Set to = end
            GoTo NonFatalInfo
        EndIf
    Else
        Set StartLabel = InstallAdapter
        Set ActivateDetection = TRUE
        Set OEM_ABANDON_OPTIONS = {}
        Set OEM_ABANDON_SOFTWARE = FALSE
        Set OEM_ABANDON_ON = TRUE
    EndIf

    Debug-Output $(InfName)": =================================================="
    Debug-Output $(InfName)": STF_CWDIR is: "$(!STF_CWDIR)
    Debug-Output $(InfName)": STF_LANGUAGE is: "$(!STF_LANGUAGE)
    Debug-Output $(InfName)": Option is: "$(Option)
    Debug-Output $(InfName)": !STF_NCDETECT  is: "$(!STF_NCDETECT)
    Debug-Output $(InfName)": !STF_NCOPTION  is: "$(!STF_NCOPTION)
    Debug-Output $(InfName)": !STF_NCDETCARD is: "$(!STF_NCDETCARD)
    Debug-Output $(InfName)": !STF_NCDETINFO is: "$(!STF_NCDETINFO)
    Debug-Output $(InfName)": =================================================="

    Set DetectedCard = FALSE
    IfStr(i) $(ActivateDetection) != TRUE
        GoTo $(StartLabel)
    EndIf

    Debug-Output $(InfName)": Calling Param_SetDefaults"
    Shell $(ParamInf) Param_SetDefaults {}

    Shell $(ParamInf) HexListFromDecList $(RAM_Addr_List)
    Set RAM_Hex_List = $($R0)

    IfStr(i) $(!STF_NCDETECT) == YES
        IfStr(i) $(!STF_NCOPTION) == $(Option)
           Set DetectedCard = TRUE
           Debug-Output $(InfName)": Setting DetectedCard to TRUE"
        EndIf
    EndIf

    Shell "" DebugConfiguration "After parameter querying"
    Set from = FatalError
    Set to = FatalError
    GoTo $(StartLabel)

;***********************************************************************
;
;***********************************************************************
InstallAdapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    IfStr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        IfStr(i) !(NTN_RegBase) == $(ProductKeyName)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
               $(ProductVersion)
           IfInt $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output $(InfName)": ShellCode error: cannot get an error string."
               GoTo ShellCodeError
           EndIf
           GoTo end
        Else
           Shell $(UtilityInf), CardExistedDlg
           IfInt $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output $(InfName)": ShellCode error: cannot get an error string."
               GoTo ShellCodeError
           EndIf
           IfStr(i) $($R1) != "OK"
               Set CommonStatus = STATUS_USERCANCEL
               GoTo end
           EndIf
           Set OldVersionExisted = $(TRUE)
        EndIf
    EndIf

    Set CurrParamSettings = {}
    IfStr(i) $(DetectedCard) != TRUE
        GoTo AdapterSetup
    EndIf

    StartWait
        Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
    EndWait

    IfStr(i) $($R0) != STATUS_SUCCESSFUL
        GoTo AdapterSetup
    EndIf

    Set DetectedParams = $($R1)
    Debug-Output $(InfName)": Calling Param_SetDefaults to merge detected params"
    Shell $(ParamInf) Param_SetDefaults $(DetectedParams)
    GoTo AdapterSetup

;***********************************************************************
;
;***********************************************************************
ConfigureAdapter = +
    IfStr $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        IfStr $(KeyProduct) == $(KeyNull)
            Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            Debug-Output $(InfName)": Cannot find component product key"
            GoTo FatalRegistry
        EndIf
    EndIf

    Debug-Output $(InfName)": Shelling to FindService"
    Shell $(UtilityInf) FindService, $(KeyProduct)
    IfInt $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output $(InfName)": FindService shell failure"
        GoTo ShellCodeError
    EndIf
    IfStr(i) $($R0) != NO_ERROR
        Debug-Output $(InfName)": FindService Shell error: "$($R0)
        GoTo FatalRegistry
    EndIf

    Set KeyParameters = $($R2)
    CloseRegKey $($R1)
    IfStr $(KeyParameters) == $(KeyNull)
        Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        Debug-Output $(InfName)": Cannot find component service"
        GoTo FatalRegistry
    EndIf

    Set OldVersionExisted = $(TRUE)
    Set ValueName = ""
    Set ValueData = ""
    Set ValueStr  = ""
    Set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
        Set ValueItem = $($)
        Set ValueName = *($(ValueItem),1)
        Set ValueData = *($(ValueItem),4)
        Debug-Output $(InfName)": "$(ValueName)"="$(ValueData)
        IfStr(i) $(ValueName) == "AddressList"
            Set TapiAddressList = $(ValueData)
        Else-IfStr(i) $(ValueName) == "RamBaseAddress"
            Set RamBaseAddress = $(ValueData)
        Else-IfStr(i) $(ValueName) == "InterruptNumber"
            Set InterruptNumber = $(ValueData)
        Else-IfStr(i) $(ValueName) == "LineType"
            Set LineType = $(ValueData)
        Else-IfStr(i) $(ValueName) == "LineRate"
            Set LineRate = $(ValueData)
        Else-IfStr(i) $(ValueName) == "BusNumber"
            Set BusNumber = $(ValueData)
        Else-IfStr(i) $(ValueName) == "BusType"
            Set BusType = $(ValueData)
        EndIf
    EndForListDo
    Shell $(ParamInf) Param_SaveValues
    Set CurrParamSettings = $($R0)

;***********************************************************************
;
;***********************************************************************
AdapterSetup = +
    Shell "" DebugConfiguration "before displaying dialog"
    Set from = AdapterOptions
    Set InterruptNumber = *($(IRQ_List), ~($(IRQ_List),$(InterruptNumber)))
    Set RAM_Hex_Value = *($(RAM_Hex_List), ~($(RAM_Addr_List),$(RamBaseAddress)))
    Set RateString = *($(Rate_Strings), ~($(Line_Rates),$(LineRate)))
    Shell $(ParamInf) Param_ParameterConfidence
    IfStr(i) $($R0) != STATUS_SUCCESSFUL
        Debug-Output $(InfName)": parameter confidence too low to bypass configuration"
        GoTo AdapterOptions
    EndIf
    IfStr(i) $(DetectedCard) == TRUE
        IfStr(i) $(!STF_INSTALL_MODE) != CUSTOM
            GoTo AdapterVerify
        EndIf
    EndIf

;***********************************************************************
;
;***********************************************************************
AdapterOptions = +
    Read-Syms FileDependentDlg$(!STF_LANGUAGE)
    UI Start "InputDlg"
    IfStr(i) $(DLGEVENT) == "CONTINUE"
        Set InterruptNumber = $(Combo1Out)
        Set RAM_Hex_Value = $(Combo2Out)
        Set RamBaseAddress = *($(RAM_Addr_List), ~($(RAM_Hex_List),$(RAM_Hex_Value)))
        Set RateString = $(Combo3Out)
        Set LineRate = *($(Line_Rates), ~($(Rate_Strings),$(RateString)))
        ui pop 1
    Else-IfStr(i) $(DLGEVENT) == "BACK"
        Set CommonStatus = STATUS_USERCANCEL
        Debug-Output $(InfName)": Action: exit. Bye."
        ui pop 1
        GoTo end
    Else
        Debug-Output $(InfName)": Action: unknown. Bye."
        ui pop 1
        GoTo end
    EndIf
    IfStr(i) $(!STF_NCDETINFO) == {}
        Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusType) $(BusNumber)
        ifInt $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output $(InfName)": ShellCode error."
            GoTo ShellCodeError
        EndIf
        Set BusType = $($R1)
        Set BusNumber = $($R2)
    Else
        Set BusType = *($(!STF_NCDETINFO),5)
        Set BusNumber = *($(!STF_NCDETINFO),6)
    EndIf

;***********************************************************************
;
;***********************************************************************
AdapterVerify = +
    Shell "" DebugConfiguration "after running dialog"
    IfStr(i) $(DetectedCard) != TRUE
        Shell $(ParamInf) Param_SaveValues
        Set NewParamSettings = $($R0)
        IfStr(i) $(CurrParamSettings) == {}
            Set DiffParamSettings = $(NewParamSettings)
        Else
            Shell $(ParamInf) Param_DiffValues $(CurrParamSettings)
            Set DiffParamSettings = $($R0)
        EndIf
        Debug-Output $(InfName)": Calling Param_VerifyResources"
        Shell $(ParamInf) Param_VerifyResources $(DiffParamSettings)
        IfStr(i) $($R0) == STATUS_SUCCESSFUL
            Debug-Output $(InfName)": Param_VerifyResources succeeded"
            GoTo SkipOptions
        EndIf
    Else
        Set CardVerifyIndex = $(!STF_NCDETCARD)
        Debug-Output $(InfName)": Calling Param_VerifyCard"
        Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
        IfStr(i) $($R0) == STATUS_SUCCESSFUL
            Debug-Output $(InfName)": Param_VerifyCard succeeded"
            GoTo SkipOptions
        EndIf
    EndIf

    Set from = AdapterOptions
    Set to = SkipOptions
    Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
    IfInt $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output $(InfName)": ShellCode error: cannot get an error string."
        GoTo ShellCodeError
    EndIf
    Set Error = $($R0)
    GoTo WarningMsg

;***********************************************************************
;
;***********************************************************************
SkipOptions =+
    IfInt $(OldVersionExisted) == $(TRUE)
        IfStr(i) $(!NTN_InstallMode) == configure
            GoTo WriteParameters
        EndIf
    EndIf
    StartWait
    IfInt $(OldVersionExisted) == $(FALSE)
        IfStr(i) $(!NTN_InstallMode) == "install"
           IfStr(i) $(DoCopy) == "YES"
              Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
              IfInt $($ShellCode) != $(!SHELL_CODE_OK)
                  GoTo ShellCodeError
              Else-IfStr(i) $($R0) == STATUS_FAILED
                  Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                  IfInt $($ShellCode) != $(!SHELL_CODE_OK)
                      GoTo ShellCodeError
                  EndIf
                  Set Error = $($R0)
                  GoTo FatalError
              Else-IfStr(i) $($R0) == STATUS_USERCANCEL
                  GoTo SuccessfulOption
              EndIf
              Set SrcDir = $($R1)
           EndIf

           Install "Install-Option"
           IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
              Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
              IfInt $($ShellCode) != $(!SHELL_CODE_OK)
                  GoTo ShellCodeError
              EndIf
              Set Error = $($R0)
              GoTo FatalError
           EndIf
        EndIf

        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernelautostart", "NDIS", {}, "",+
            $(NetEventDLL)
        Set OEM_ABANDON_SOFTWARE = TRUE
        IfInt $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output $(InfName)": ShellCode error"
            GoTo ShellCodeError
        EndIf
        Set RegistryErrorIndex = $($R0)
        Set KeyProduct      = $($R1)
        Set SoftNetRulesKey = $($R2)
        CloseRegKey $($R3)
        CloseRegKey $($R4)
        CloseRegKey $($R5)

        IfStr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output $(InfName)": Registry error: add software components"
            CloseRegKey $(KeyProduct)
            CloseRegKey $(SoftNetRulesKey)
            GoTo FatalRegistry
        EndIf

        Set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
        IfInt $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output $(InfName)": ShellCode error."
            GoTo ShellCodeError
        EndIf
        Set RegistryErrorIndex = $($R0)
        IfStr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output $(InfName)": Registry error: add value list."
            CloseRegKey $(KeyProduct)
            CloseRegKey $(SoftNetRulesKey)
            GoTo FatalRegistry
        EndIf

        Set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(Bindable$(Option)Txt)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
        IfInt $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output $(InfName)": ShellCode error."
            GoTo ShellCodeError
        EndIf
        Set RegistryErrorIndex = $($R0)
        CloseRegKey $(KeyProduct)
        CloseRegKey $(SoftNetRulesKey)
        IfStr(i) $(RegistryErrorIndex) != NO_ERROR
            EndWait
            Debug-Output $(InfName)": Resgitry error: add value list."
            GoTo FatalRegistry
        EndIf
    EndIf

    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
    IfInt $($R4) != -1
        Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    EndIf
    IfInt $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output $(InfName)": Cannot add hardware component"
        GoTo ShellCodeError
    EndIf
    Set RegistryErrorIndex = $($R0)
    IfStr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output $(InfName)": Registry error: add hardware component"
        CloseRegKey $($R1)
        CloseRegKey $($R2)
        CloseRegKey $($R3)
        GoTo FatalRegistry
    EndIf

    Set KeyParameters = $($R3)
    Set KeyAdapterRules = $($R2)
    Set AdapterNumber = $($R4)
    Set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    IfInt $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output $(InfName)": ShellCode error"
        GoTo ShellCodeError
    EndIf
    CloseRegKey $($R1)

;;; You need one address entry in the list for each channel on your device.
;;; FIXME - at this point RAS requires there to be one logical line per address
;;; FIXME - so the address (channel) number is ignored and the line number is used
    Set TapiAddressList = {$(AdapterNumber)"-1-0"}
    IfStr(i) $(Option) == HTDSU42
        Set TapiAddressList = >($(TapiAddressList),$(AdapterNumber)"-2-0")
    EndIf

    Set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    Set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
    Set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                        {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                        {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                        {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    IfInt $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output $(InfName)": ShellCode error."
        GoTo ShellCodeError
    EndIf
    Set RegistryErrorIndex = $($R0)
    IfStr(i) $(RegistryErrorIndex) != NO_ERROR
        EndWait
        Debug-Output $(InfName)": Resgitry error: add value list."
        CloseRegKey $(KeyParameters)
        CloseRegKey $(KeyAdapterRules)
        GoTo FatalRegistry
    EndIf
    CloseRegKey $(KeyAdapterRules)

    GoTo WriteParameters

;***********************************************************************
;
;***********************************************************************
WriteParameters = +
    Set NewValueList = {+
                       {AddressList,$(NoTitle),$(!REG_VT_MULTI_SZ),$(TapiAddressList)},+
                       {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
                       {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusType)},+
                       {DeviceName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                       {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(InterruptNumber)},+
                       {LineType,$(NoTitle),$(!REG_VT_DWORD),$(LineType)},+
                       {LineRate,$(NoTitle),$(!REG_VT_DWORD),$(LineRate)},+
                       {MediaType,$(NoTitle),$(!REG_VT_SZ),$(TapiMediaType)},+
                       {RamBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(RamBaseAddress)}+
                       }
;;;                       {DebugFlags,$(NoTitle),$(!REG_VT_DWORD),$(DebugFlags)},+
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    CloseRegKey $(KeyParameters)
    IfInt $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output $(InfName)": ShellCode error."
        GoTo ShellCodeError
    EndIf
    Set RegistryErrorIndex = $($R0)
    IfStr(i) $(RegistryErrorIndex) != NO_ERROR
        Debug-Output $(InfName)": Registry error: Add value list"
        GoTo FatalRegistry
    EndIf
    ;
    ; Create the HARDWARE\DEVICEMAP\TAPI DEVICES\HTDSU41 key
    ;
    OpenRegKey $(!REG_H_LOCAL) "" "HARDWARE\DEVICEMAP" $(MAXIMUM_ALLOWED) BaseKey
    shell "" HtCreateRegKey $(BaseKey) "TAPI DEVICES\HTDSU41"
    IfStr(i) $($R0) != NO_ERROR
        Debug-Output $(InfName)": Error creating registry key!"
        GoTo FatalRegistry
    EndIf
    Set TapiDeviceKey = $($R1)
    Set NewValueList = {+
                       {Address,$(NoTitle),$(!REG_VT_MULTI_SZ),$(TapiAddressList)},+
                       {"Media Type",$(NoTitle),$(!REG_VT_SZ),$(TapiMediaType)}}
    Shell  $(UtilityInf), AddValueList, $(TapiDeviceKey), $(NewValueList)
    IfInt $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output $(InfName)": ShellCode error."
        GoTo ShellCodeError
    EndIf
    Set RegistryErrorIndex = $($R0)
    IfStr(i) $(RegistryErrorIndex) != NO_ERROR
        Debug-Output $(InfName)": Registry error: Add value list"
        GoTo FatalRegistry
    EndIf
    CloseRegKey $(TapiDeviceKey)
    CloseRegKey $(BaseKey)
    ;
    ; if RAS is not installed, then shell ras setup INF file to install RAS
    ; else invoke RAS to allow user to configure RAS for Switch56. 
    ;
    Read-Syms InvokeRasDlg$(!STF_LANGUAGE)
    Shell "oemnsvra.inf" CheckRasInstalled
    IfInt $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output $(InfName)": Error Shelling the RAS INF file oemnsvra.inf" 
        Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE),  +
                "STATUS", $(InvokeRasError)
        IfInt $($ShellCode) != $(!SHELL_CODE_OK)
            GoTo ShellCodeError
        EndIf
        GoTo SuccessfulOption
    EndIf
    Set RasInstalled = $($R0)
    Debug-Output $(InfName)": Is RAS Installed? "$(RasInstalled)
    ;
    ; display a message to the user that RAS setup will now be invoked
    ;
    IfStr(i) $(RasInstalled) == FALSE
        Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", +
                $(InvokeRasSetupMsg)
        IfInt $($ShellCode) != $(!SHELL_CODE_OK)
            GoTo SuccessfulOption
        EndIf
    Else
        Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", +
                $(InvokeRasConfigMsg)
        IfInt $($ShellCode) != $(!SHELL_CODE_OK)
            GoTo SuccessfulOption
        EndIf
    EndIf
    ;
    ; If this is a reconfiguration, skip the automatic call to RAS setup.
    ;
    IfInt $(OldVersionExisted) == $(TRUE)
        IfStr(i) $(!NTN_InstallMode) == configure
            GoTo SuccessfulOption
        EndIf
    EndIf
    ;
    ; Set the flags based on whether this is an IDW installation
    ;
    IfStr(i) $(!STF_IDW) == TRUE
        Set AddCopy  = NO
        Set DoCopy   = NO
        Set DoConfig = NO
    Else
        Set AddCopy  = YES
        Set DoCopy   = YES
        Set DoConfig = YES
    EndIf
    ;
    ; change the global install mode flag to configure if RAS is already installed
    ;
    Set SaveNTN_InstallMode = $(!NTN_InstallMode)
    IfStr(i) $(RasInstalled) == TRUE
        Set !NTN_InstallMode = configure
    Else
        Set !NTN_InstallMode = install
    EndIf
    ;
    ; Override the default drive\directory selection so user can choose..
    ;
    Set SaveSTF_SRCDIR_OVERRIDE = $(!STF_SRCDIR_OVERRIDE)
    Set !STF_SRCDIR_OVERRIDE = ""
    Set RasDir = "A:\"$(!STF_PLATFORM)
    ;
    ; now invoke RAS setup to do the right thing
    ;
    Debug-Output $(InfName)": Shelling to RAS:"
    Shell "oemnsvra.inf" InstallOption $(!STF_LANGUAGE) "RAS" $(RasDir) $(AddCopy) $(DoCopy) $(DoConfig)
    Debug-Output $(InfName)": Back from RAS: ShellCode="$($ShellCode)
	;
	; Restore the global install flags.
	;
    Set !NTN_InstallMode = $(SaveNTN_InstallMode)
    Set !STF_SRCDIR_OVERRIDE = $(SaveSTF_SRCDIR_OVERRIDE)
	;
	; Check for RAS errors.
	;
    IfInt $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output $(InfName)": Error Shelling the RAS INF file oemnsvra.inf"
        Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS",  +
                $(InvokeRasError)
        IfInt $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output $(InfName)": Cannot run SetupMessage: ShellCode="$($ShellCode)
            GoTo ShellCodeError
        EndIf
        GoTo SuccessfulOption
    EndIf
	;
	; If RAS reports no change, warn the user that the driver may not
	; be configured properly.
	;
    IfStr(i) $($R0) == STATUS_NO_EFFECT
        Shell "subroutn.inf" SetupMessage, $(!STF_LANGUAGE), "STATUS", +
                $(InvokeRasAgainMsg)
        IfInt $($ShellCode) != $(!SHELL_CODE_OK)
            GoTo SuccessfulOption
        EndIf
    EndIf

    Set CommonStatus = $($R0)

    GoTo SuccessfulOption

;***********************************************************************
;
;***********************************************************************
BindingAdapter =+
    Set Error = "Binding: Sorry, not yet implemented."
    GoTo FatalError

;***********************************************************************
;
;***********************************************************************
RemoveAdapter = +
    IfStr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        IfInt $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output $(InfName)": ShellCode error"
            GoTo ShellCodeError
        EndIf
        Set RegistryErrorIndex = $($R0)
        IfStr(i) $(RegistryErrorIndex) != NO_ERROR
            GoTo FatalRegistry
        EndIf
    Else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        IfInt $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output $(InfName)": ShellCode error"
            GoTo ShellCodeError
        EndIf
        Set RegistryErrorIndex = $($R0)
        IfStr(i) $(RegistryErrorIndex) != NO_ERROR
            GoTo FatalRegistry
        EndIf
    EndIf
    GoTo end

;***********************************************************************
;
;***********************************************************************
UpgradeSoftware = +
    IfStr(i) $(ProductKeyName) == $(!NTN_RegBase)
        OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
        IfStr $(KeyProduct) != $(KeyNull)
            GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
            Set Version = *($(VersionInfo), 4)
            Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
            IfInt $($ShellCode) != $(!SHELL_CODE_OK)
                Debug-Output $(InfName)": ShellCode error"
                GoTo ShellCodeError
            EndIf
            Set !UG_Filename = $($R0)
            IfStr(i) $(!UG_Filename) != ""
                install "Install-Update"
                IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
                    GoTo FatalError
                EndIf
            EndIf
            SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
            SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
            IfInt $(Version) != $(ProductVersion)
            EndIf
            CloseRegKey $(KeyProduct)
        Else
            GoTo FatalRegistry
        EndIf
    Else
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
              $(MAXIMUM_ALLOWED) NetworkCardKey
        IfStr(i) $(NetworkCardKey) != $(KeyNull)
            GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
            Set ServiceName = *($(ServiceNameInfo), 4)
            OpenRegKey $(NetworkCardKey) "" "NetRules" +
                $(MAXIMUM_ALLOWED) NetRuleKey
            IfStr(i) $(NetRuleKey) != $(KeyNull)
            Else
                GoTo FatalRegistry
            EndIf
            CloseRegKey $(NetRules)
            CloseRegKey $(NetworkCardKey)
        Else
            GoTo FatalRegistry
        EndIf
        OpenRegKey $(!REG_H_LOCAL) "" +
              $(!NTN_ServiceBase)"\"$(ServiceName) +
              $(MAXIMUM_ALLOWED) ServiceKey
        IfStr(i) $(ServiceKey) != $(KeyNull)
            CloseRegKey $(ServiceKey)
        Else
            GoTo FatalRegistry
        EndIf
    EndIf
    GoTo end

;***********************************************************************
;
;***********************************************************************
SuccessfulOption = +
    GoTo end

;***********************************************************************
;
;***********************************************************************
Abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        IfInt $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output $(InfName)": ShellCode error"
            GoTo ShellCodeError
        EndIf
        Set RegistryErrorIndex = $($R0)
        IfStr(i) $(RegistryErrorIndex) != NO_ERROR
            GoTo FatalRegistry
        EndIf
    EndForListDo
    IfStr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        IfInt $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output $(InfName)": ShellCode error"
            GoTo ShellCodeError
        EndIf
        Set RegistryErrorIndex = $($R0)
        IfStr(i) $(RegistryErrorIndex) != NO_ERROR
            GoTo FatalRegistry
        EndIf
    EndIf
    GoTo end

;***********************************************************************
;
;***********************************************************************
WarningMsg = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    IfInt $($ShellCode) != $(!SHELL_CODE_OK)
        GoTo ShellCodeError
    EndIf
    IfStr(i) $($R1) == "OK"
        GoTo $(to)
    Else-IfStr(i) $($R1) == "CANCEL"
        GoTo $(from)
    EndIf
    GoTo end

;***********************************************************************
;
;***********************************************************************
NonFatalInfo = +
    Set Severity = STATUS
    Set CommonStatus = STATUS_USERCANCEL
    IfStr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        IfInt $($ShellCode) != $(!SHELL_CODE_OK)
            GoTo ShellCodeError
        EndIf
        Set Error = $($R0)
    EndIf
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    IfInt $($ShellCode) != $(!SHELL_CODE_OK)
        GoTo ShellCodeError
    EndIf
    IfStr(i) $($R1) == "OK"
        GoTo $(from)
    EndIf
    GoTo end

;***********************************************************************
;
;***********************************************************************
FatalRegistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    IfInt $($ShellCode) != $(!SHELL_CODE_OK)
        GoTo ShellCodeError
    EndIf
    Set Error = $($R0)
    GoTo FatalError

;***********************************************************************
;
;***********************************************************************
FatalDetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    IfInt $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output $(InfName)": ShellCode error: cannot get an error string."
        GoTo ShellCodeError
    EndIf
    Set Error = $($R0)
    GoTo FatalError

;***********************************************************************
;
;***********************************************************************
FatalError = +
    IfStr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        IfInt $($ShellCode) != $(!SHELL_CODE_OK)
            GoTo ShellCodeError
        EndIf
        Set Error = $($R0)
    EndIf
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    IfInt $($ShellCode) != $(!SHELL_CODE_OK)
        GoTo ShellCodeError
    EndIf
    GoTo SetFailed

;***********************************************************************
;
;***********************************************************************
ShellCodeError = +
    Set DlgType      = "MessageBox"
    Set STF_MB_TITLE = $(ShellCodeErrorTitle)
    Set STF_MB_TEXT  = $(ShellCodeErrorText)
    Set STF_MB_TYPE  = 1
    Set STF_MB_ICON  = 3
    Set STF_MB_DEF   = 1
    UI Start "Error Message"
    GoTo SetFailed

;***********************************************************************
;
;***********************************************************************
SetFailed = +
    Set CommonStatus = STATUS_FAILED
    IfStr(i) $(OEM_ABANDON_ON) == TRUE
        Set OEM_ABANDON_ON = FALSE
        GoTo Abandon
    EndIf
    GoTo end

;***********************************************************************
;
;***********************************************************************
end = +
    Set !DebugOutputControl = $(OldDebugControl)
    Return $(CommonStatus)

;***********************************************************************
;
;***********************************************************************
[HtCreateRegKey]
    Debug-Output $(InfName)": Entering [HtCreateRegKey]"
    Set ECR_Result          = NO_ERROR
    Set ECR_BaseKeyHandle   = $($0)
    Set ECR_NewPath         = $($1)
    Set KeyNull             = ""
    Set MAXIMUM_ALLOWED     = 33554432

    Debug-Output $(InfName)": HtCreateRegKey - ECR_BaseKeyHandle = "$(ECR_BaseKeyHandle)
    Debug-Output $(InfName)":                  ECR_NewPath       = "$(ECR_NewPath)
    Debug-Output $(InfName)":                  MAXIMUM_ALLOWED   = "$(MAXIMUM_ALLOWED)
    Debug-Output $(InfName)":                  KeyNull           = "$(KeyNull)

    OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_NewPath) $(MAXIMUM_ALLOWED) +
               ECR_BaseKey
    Debug-Output $(InfName)": ECR_BaseKey = "$(ECR_BaseKey)
    Debug-Output $(InfName)":     OpenRegKey returned "$($R0)
    IfStr $(ECR_BaseKey) == $(KeyNull)
        Debug-Output $(InfName)": ECR_BaseKey == KeyNull"
    Else
        Debug-Output $(InfName)": ECR_BaseKey != KeyNull"
        Set ECR_KeyHandle = $(ECR_BaseKey)
        GoTo  ECR_Return
    EndIf

    Set ECR_TmpPath = ""
    Split-String $(ECR_NewPath) "\" ECR_PList
    Debug-Output $(InfName)": ECR_PList = "$(ECR_PList)
    ForListDo $(ECR_PList)
        IfStr(i) $($) != "\"
            IfInt $(#) == 1
                Set ECR_TmpPath = $($)
            Else
                Set ECR_TmpPath = $(ECR_TmpPath)"\"$($)
            EndIf
            Debug-Output $(InfName)": Determining if "$(ECR_TmpPath)" exists"
            OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_TmpPath) $(MAXIMUM_ALLOWED) ECR_BaseKey
            IfStr $(ECR_BaseKey) == $(KeyNull)
                Debug-Output $(InfName)": Creating "$(ECR_TmpPath)
                CreateRegKey $(ECR_BaseKeyHandle)  {$(ECR_TmpPath),0,GenericClass} "" $(MAXIMUM_ALLOWED) "" ECR_KeyHandle
                IfStr(i) $(ECR_KeyHandle) == $(KeyNull)
                    Set ECR_Result = $($R0)
                    GoTo ECR_Return
                EndIf
            EndIf
        EndIf
    EndForListDo
ECR_Return = +
    Return $(ECR_Result) $(ECR_KeyHandle)

;***********************************************************************
;
;***********************************************************************
[DebugConfiguration]
    Debug-Output $(!p:InfName)": **CONFIGURATION STATE: "$($0)
    Debug-Output $(!p:InfName)": InterruptNumber is "$(!p:InterruptNumber)
    Debug-Output $(!p:InfName)": RamBaseAddress  is "$(!p:RamBaseAddress)
    Debug-Output $(!p:InfName)": LineType        is "$(!p:LineType)
    Debug-Output $(!p:InfName)": LineRate        is "$(!p:LineRate)
    Return

;***********************************************************************
;
;***********************************************************************
[Install-Option]
    Set STF_VITAL = ""
    IfStr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    EndIf
    IfStr(i) $(DoCopy) == "YES"
       Set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    EndIf
    Exit

;***********************************************************************
;
;***********************************************************************
[Install-Update]
   Set STF_VITAL        = ""
   Set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   Set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   Exit

;***********************************************************************
;
;***********************************************************************
[Source Media Descriptions]
    1  = "Windows NT Setup Disk #1" , TAGFILE = HTDSU41.SYS

;***********************************************************************
;
;***********************************************************************
[ProductType]
    STF_PRODUCT         = Winnt
    STF_PLATFORM        = I386

;***********************************************************************
;
;***********************************************************************
[Files-Inf]
    1, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)

;***********************************************************************
;
;***********************************************************************
[Files-HTDSU41]
    1, HTDSU41.SYS, SIZE=65536

;***********************************************************************
;
;***********************************************************************
[LanguagesSupported]
    ENG

;***********************************************************************
;
;***********************************************************************
[OptionsTextENG]
    HTDSU41             = "HT Communications DSU41"
;   HTDSU42             = "HT Communications DSU42"

;***********************************************************************
;
;***********************************************************************
[FileConstantsENG]
    ProCaption          = "Windows NT Setup"
    ProCancel           = "Cancel"
    ProCancelMsg        = "Windows NT Networking is not correctly installed.  "+
                          "Are you sure you want to cancel copying files?"
    ProCancelCap        = "Network Setup Message"
    ProText1            = "Copying:"
    ProText2            = "To:"

    FunctionTitleHTDSU41                = "HT Communications DSU41 Card Setup"
    ProductSoftwareDescription          = "HT Communications DSU41 Driver"
    ProductHardwareHTDSU41Description   = "HT Communications DSU41"
    ProductSoftwareTitle                = "HT Communications DSU41 Driver"
    ProductHardwareHTDSU41Title         = "HT Communications DSU41 Adapter"

    ShellCodeErrorTitle                 = "Error: "$(FunctionTitle)$(Option))
    ShellCodeErrorText                  = "Shell Code Error."

;***********************************************************************
;
;***********************************************************************
[DialogConstantsENG]
    Help                = "&Help"
    Exit                = "Cancel"
    OK                  = "OK"
    HelpContext         = ""
    Continue            = "Continue"
    Cancel              = "Cancel"

;***********************************************************************
;
;***********************************************************************
[FileDependentDlgENG]
    DlgType             = "MultiCombo"
    DlgTemplate         = "WD"
    Caption             = $(FunctionTitle)$(Option)

    Combo1Label         = "&IRQ Level:"
    Combo1List          = $(IRQ_List)
    Combo1Out           = $(InterruptNumber)

    Combo2Label         = "&RAM Base Address:"
    Combo2List          = $(RAM_Hex_List)
    Combo2Out           = $(RAM_Hex_Value)

    Combo3Label         = "&Transmit Rate:"
    Combo3List          = $(Rate_Strings)
    Combo3Out           = $(RateString)

    ComboListItemsIn    = {Combo1List, Combo2List, Combo3List}
    ComboListItemsOut   = {Combo1Out, Combo2Out, Combo3Out}
    EditTextIn          = ""
    EditTextLim         = ""
    CBOptionsGreyed     = {}
    NotifyFields        = {NO, NO, NO}
;    HelpContext         = $(!IDH_DB_OEMNAD1_INS)

;***********************************************************************
;
;***********************************************************************
[InvokeRasDlgENG]
    InvokeRasSetupMsg   = "HT Communications DSU41 setup is complete. "+
                          "Remote Access Services (RAS) must now be installed. "+
                          "Please configure the HTDSU41Sw56 ports in RAS "+
                          "setup to enable you to use RAS over the HTDSU41."
    InvokeRasConfigMsg  = "HT Communications DSU41 setup is complete. "+
                          "Remote Access Services (RAS) setup must now be invoked. "+
                          "Please configure the HTDSU41Sw56 ports in RAS "+
                          "setup to enable you to use RAS over the HTDSU41."
    InvokeRasAgainMsg   = "HT Communications DSU41 setup is NOT complete! "+
                          "Remote Access Services (RAS) is not configured to use a "+
                          "HTDSU41Sw56 port.  You must configure at least one HTDSU41Sw56 "+
                          "port in RAS setup now, or you will have reconfigure the adapter "+
                          "before running RAS configuration again later."
    InvokeRasError      = "HT Communications DSU41 setup encountered an error "+
                          "while invoking the RAS setup INF file (OEMNSVRA.INF). "+
                          "Please make sure that the file is present in the "+
                          "System32 directory and is the proper file."