/*++

Copyright (c) 1994  Digital Equipment Corporation

Module Name:

    ebsysint.c

Abstract:

    This module implements the HAL enable/disable system interrupt, and
    request interprocessor interrupt routines for the EB164 system.

Author:

    Joe Notarangelo  20-Jul-1994

Environment:

    Kernel mode

Revision History:

--*/

#include "halp.h"
#include "eb164.h"


//
// Function prototype
//

VOID
HalpDisablePciInterrupt(
    IN ULONG Vector
    );

VOID
HalpEnablePciInterrupt(
    IN ULONG Vector,
    IN KINTERRUPT_MODE InterruptMode
    );


VOID
HalDisableSystemInterrupt (
    IN ULONG Vector,
    IN KIRQL Irql
    )

/*++

Routine Description:

    This routine disables the specified system interrupt.

Arguments:

    Vector - Supplies the vector of the system interrupt that is disabled.

    Irql - Supplies the IRQL of the interrupting source.

Return Value:

    None.

--*/

{

    KIRQL OldIrql;

    //
    // Raise IRQL to the highest level.
    //

    KeRaiseIrql(HIGH_LEVEL, &OldIrql);

    //
    // If the vector number is within the range of the ISA interrupts, then
    // disable the ISA interrrupt.
    //

    if (Vector >= ISA_VECTORS &&
        Vector < MAXIMUM_ISA_VECTOR &&
        Irql == DEVICE_HIGH_LEVEL) {
        HalpDisableSioInterrupt(Vector);
    }

    //
    // If the vector number is within the range of the PCI interrupts, then
    // disable the PCI interrrupt.
    //

    if (Vector >= PCI_VECTORS &&
        Vector < MAXIMUM_PCI_VECTOR &&
        Irql == DEVICE_HIGH_LEVEL) {
        HalpDisablePciInterrupt(Vector);
    }

    //
    // If the vector is a performance counter vector we will ignore
    // the enable - the performance counters are enabled directly by
    // the wrperfmon callpal.  Wrperfmon must be controlled directly
    // by the driver.
    //

    switch (Vector) {

    case PC0_VECTOR:
    case PC1_VECTOR:
    case PC2_VECTOR:

        break;

    } //end switch Vector

    //
    // Lower IRQL to the previous level.
    //

    KeLowerIrql(OldIrql);
    return;
}


BOOLEAN
HalEnableSystemInterrupt (
    IN ULONG Vector,
    IN KIRQL Irql,
    IN KINTERRUPT_MODE InterruptMode
    )

/*++

Routine Description:

    This routine enables the specified system interrupt.

Arguments:

    Vector - Supplies the vector of the system interrupt that is enabled.

    Irql - Supplies the IRQL of the interrupting source.

    InterruptMode - Supplies the mode of the interrupt; LevelSensitive or
        Latched.

Return Value:

    TRUE if the system interrupt was enabled

--*/

{
    BOOLEAN Enabled = FALSE;
    KIRQL OldIrql;

    //
    // Raise IRQL to the highest level.
    //

    KeRaiseIrql(HIGH_LEVEL, &OldIrql);

    //
    // If the vector number is within the range of the ISA interrupts, then
    // enable the ISA interrrupt and set the Level/Edge register.
    //

    if (Vector >= ISA_VECTORS &&
        Vector < MAXIMUM_ISA_VECTOR &&
        Irql == DEVICE_HIGH_LEVEL) {
        HalpEnableSioInterrupt( Vector, InterruptMode );
        Enabled = TRUE;
    }

    //
    // If the vector number is within the range of the PCI interrupts, then
    // enable the PCI interrrupt.
    //

    if (Vector >= PCI_VECTORS &&
        Vector < MAXIMUM_PCI_VECTOR &&
        Irql == DEVICE_HIGH_LEVEL) {
        HalpEnablePciInterrupt( Vector, InterruptMode );
        Enabled = TRUE;
    }

    //
    // If the vector is a performance counter vector we will ignore
    // the enable - the performance counters are enabled directly by
    // the wrperfmon callpal.  Wrperfmon must be controlled directly
    // by the driver.
    //

    switch (Vector) {

    case PC0_VECTOR:
    case PC1_VECTOR:
    case PC2_VECTOR:

        Enabled = TRUE;
        break;

    } //end switch Vector

    //
    // Lower IRQL to the previous level.
    //

    KeLowerIrql(OldIrql);
    return Enabled;

}


ULONG
HalpGetSystemInterruptVector(
    IN PBUS_HANDLER BusHandler,
    IN PBUS_HANDLER RootHandler,    
    IN ULONG BusInterruptLevel,
    IN ULONG BusInterruptVector,
    OUT PKIRQL Irql,
    OUT PKAFFINITY Affinity
    )

/*++

Routine Description:

    This function returns the system interrupt vector and IRQL level
    corresponding to the specified bus interrupt level and/or vector. The
    system interrupt vector and IRQL are suitable for use in a subsequent 
    call to KeInitializeInterrupt.

    We only use InterfaceType and BusInterruptLevel.  BusInterruptVector
    for EISA and ISA are the same as the InterruptLevel, so ignore.

Arguments:

    BusHandler - Registered BUSHANDLER for the target configuration space

    RootHandler - Registered BUSHANDLER for the orginating HalGetBusData 
        request.

    BusInterruptLevel - Supplies the bus-specific interrupt level.

    BusInterruptVector - Supplies the bus-specific interrupt vector.

    Irql - Returns the system request priority.

    Affinity - Returns the affinity for the requested vector

Return Value:

    Returns the system interrupt vector corresponding to the specified device.

--*/

{
    INTERFACE_TYPE  InterfaceType = BusHandler->InterfaceType;
    ULONG BusNumber = BusHandler->BusNumber;

    ULONG Vector;

    *Affinity = 1;

    switch (InterfaceType) {

    case ProcessorInternal:

	//
	// Handle the internal defined for the processor itself
	// and used to control the performance counters in the 21064.
	//

        if( (Vector = HalpGet21164PerformanceVector( BusInterruptLevel, 
                                                     Irql)) != 0 ){

            //
            // Performance counter was successfully recognized.
            //

            *Affinity = HalpActiveProcessors;
            return Vector;

        } else {

            //
            // Unrecognized processor interrupt.
            //

            *Irql = 0;
            *Affinity = 0;
            return 0;            

        } //end if Vector

        break;

    case Internal:

        //
        // This bus type is for things connected to the processor
        // in some way other than a standard bus, e.g., (E)ISA, PCI.
        // Since devices on this "bus," apart from the special case of
        // the processor, above, interrupt via the 82c59 cascade in the 
        // ESC, we assign vectors based on (E)ISA_VECTORS - see below.
        // Firmware must agree on these vectors, as it puts them in
        // the CDS.
        //

        *Irql = DEVICE_HIGH_LEVEL;

        return(BusInterruptLevel + ISA_VECTORS);
        break;

    case Isa:

        //
        // Assumes all ISA devices coming in on same processor pin
        //

        *Irql = DEVICE_HIGH_LEVEL;

        //
        // The vector is equal to the specified bus level plus ISA_VECTORS.
        // N.B.: this encoding technique uses the notion of defining a
        // base interrupt vector in the space defined by the constant,
        // ISA_VECTORS, which may or may not differ from EISA_VECTORS or
        // PCI_VECTORS.
        //

        return(BusInterruptLevel + ISA_VECTORS);
        break;
    

    case Eisa: 

        //
        // Assumes all EISA devices coming in on same processor pin
        //

        *Irql = DEVICE_HIGH_LEVEL;

        //
        // The vector is equal to the specified bus level plus the EISA_VECTOR.
        //

        return(BusInterruptLevel + EISA_VECTORS);
        break;

    case PCIBus:

        //
        // Assumes all PCI devices coming in on same processor pin
        //

        *Irql = DEVICE_HIGH_LEVEL;

        //
        // The vector is equal to the specified bus level plus the PCI_VECTOR
        //
        // N.B. The BusInterruptLevel is one-based while the vectors 
        //      themselves are zero-based.  The BusInterruptLevel must be 
        //      one-based because if scsiport sees a zero vector then it
        //      will believe the interrupt is not connected.  So in PCI
        //      configuration we have made the interrupt vector correspond
        //      to the slot and interrupt pin.
        //

        return( (BusInterruptLevel - 1) + PCI_VECTORS);

        break;

    default:      

        //
        //  Not an interface supported on EB164 systems.
        //

#if defined(HALDBG)

        DbgPrint("EBSYSINT: InterfaceType (%x) not supported on EB164\n",
                 InterfaceType);

#endif

        *Irql = 0;
        *Affinity = 0;
        return(0);
        break;

    }  //end switch(InterfaceType)

}


VOID
HalRequestIpi ( 
    IN ULONG Mask
    )
/*++

Routine Description:

    This routine requests an interprocessor interrupt on a set of processors.
    This routine performs no function on an EB164 because it is a
    uni-processor system.

Arguments:

    Mask - Supplies the set of processors that are sent an interprocessor
        interrupt.

Return Value:

    None.

--*/

{
    return;
}