/*++ Copyright (c) 1989-1993 Microsoft Corporation Module Name: spxaddr.c Abstract: This module contains code which implements the ADDRESS object. Routines are provided to create, destroy, reference, and dereference, transport address objects. Author: Adam Barr (adamba ) Original Version Nikhil Kamkolkar (nikhilk) 11-November-1993 Environment: Kernel mode Revision History: --*/ #include "precomp.h" #pragma hdrstop #ifdef ALLOC_PRAGMA #pragma alloc_text( PAGE, SpxAddrFileCreate) #pragma alloc_text( PAGE, SpxAddrFileClose) #endif // Define module number for event logging entries #define FILENUM SPXADDR // Map all generic accesses to the same one. static GENERIC_MAPPING AddressGenericMapping = { READ_CONTROL, READ_CONTROL, READ_CONTROL, READ_CONTROL }; #define REORDER(_Socket) ((((_Socket) & 0xff00) >> 8) | (((_Socket) & 0x00ff) << 8)) NTSTATUS SpxAddrOpen( IN PDEVICE Device, IN PREQUEST Request ) /*++ Routine Description: This routine opens a file that points to an existing address object, or, if the object doesn't exist, creates it (note that creation of the address object includes registering the address, and may take many seconds to complete, depending upon system configuration). If the address already exists, and it has an ACL associated with it, the ACL is checked for access rights before allowing creation of the address. Arguments: DeviceObject - pointer to the device object describing the ST transport. Request - a pointer to the request used for the creation of the address. Return Value: NTSTATUS - status of operation. --*/ { NTSTATUS status; PSPX_ADDR pAddr; PSPX_ADDR_FILE pAddrFile; PFILE_FULL_EA_INFORMATION ea; TRANSPORT_ADDRESS UNALIGNED *name; TA_ADDRESS UNALIGNED * AddressName; USHORT Socket, hostSocket; ULONG DesiredShareAccess; CTELockHandle LockHandle, LockHandleAddr; PACCESS_STATE AccessState; ACCESS_MASK GrantedAccess; BOOLEAN AccessAllowed; int i; BOOLEAN found = FALSE; #ifdef ISN_NT PIRP Irp = (PIRP)Request; PIO_STACK_LOCATION IrpSp = IoGetCurrentIrpStackLocation(Irp); #endif // The network name is in the EA, passed in the request. ea = OPEN_REQUEST_EA_INFORMATION(Request); if (ea == NULL) { DBGPRINT(TDI, ERR, ("OpenAddress: REQUEST %lx has no EA\n", Request)); return STATUS_NONEXISTENT_EA_ENTRY; } // this may be a valid name; parse the name from the EA and use it if OK. name = (PTRANSPORT_ADDRESS)&ea->EaName[ea->EaNameLength+1]; AddressName = (PTA_ADDRESS)&name->Address[0]; // The name can be passed with multiple entries; we'll take and use only // the first one of type IPX. for (i=0;iTAAddressCount;i++) { if (AddressName->AddressType == TDI_ADDRESS_TYPE_IPX) { if (AddressName->AddressLength >= sizeof(TDI_ADDRESS_IPX)) { Socket = ((TDI_ADDRESS_IPX UNALIGNED *)&AddressName->Address[0])->Socket; GETSHORT2SHORT(&hostSocket, &Socket); DBGPRINT(CREATE, DBG, ("SpxAddrOpen: Creating socket %lx.h%lx\n", Socket, hostSocket )); found = TRUE; } break; } else { AddressName = (PTA_ADDRESS)(AddressName->Address + AddressName->AddressLength); } } if (!found) { DBGPRINT(TDI, ERR, ("OpenAddress: REQUEST %lx has no IPX Address\n", Request)); return STATUS_INVALID_ADDRESS_COMPONENT; } #ifdef SOCKET_RANGE_OPEN_LIMITATION_REMOVED // Is the socket in our range if its in the range 0x4000-0x7FFF if (IN_RANGE(hostSocket, DYNSKT_RANGE_START, DYNSKT_RANGE_END)) { if (!IN_RANGE( hostSocket, PARAM(CONFIG_SOCKET_RANGE_START), PARAM(CONFIG_SOCKET_RANGE_END))) { return(STATUS_INVALID_ADDRESS); } } #endif // get an address file structure to represent this address. status = SpxAddrFileCreate(Device, Request, &pAddrFile); if (!NT_SUCCESS(status)) return status; // See if this address is already established. This call automatically // increments the reference count on the address so that it won't disappear // from underneath us after this call but before we have a chance to use it. // // To ensure that we don't create two address objects for the // same address, we hold the device context addressResource until // we have found the address or created a new one. ExAcquireResourceExclusive (&Device->dev_AddrResource, TRUE); CTEGetLock (&Device->dev_Lock, &LockHandle); // We checkfor/create sockets within the critical section. if (Socket == 0) { Socket = SpxAddrAssignSocket(Device); if (Socket == 0) { DBGPRINT(ADDRESS, ERR, ("OpenAddress, no unique socket found\n")); CTEFreeLock (&Device->dev_Lock, LockHandle); ExReleaseResource (&Device->dev_AddrResource); return STATUS_INSUFFICIENT_RESOURCES; } DBGPRINT(ADDRESS, INFO, ("OpenAddress, assigned socket %lx\n", Socket)); } pAddr = SpxAddrLookup(Device, Socket); if (pAddr == NULL) { CTEFreeLock (&Device->dev_Lock, LockHandle); // This address doesn't exist. Create it. // registering it. It also puts a ref of type ADDR_FILE on address. pAddr = SpxAddrCreate( Device, Socket); if (pAddr != (PSPX_ADDR)NULL) { #ifdef ISN_NT // Initialize the shared access now. We use read access // to control all access. DesiredShareAccess = (ULONG) (((IrpSp->Parameters.Create.ShareAccess & FILE_SHARE_READ) || (IrpSp->Parameters.Create.ShareAccess & FILE_SHARE_WRITE)) ? FILE_SHARE_READ : 0); IoSetShareAccess( FILE_READ_DATA, DesiredShareAccess, IrpSp->FileObject, &pAddr->u.sa_ShareAccess); // Assign the security descriptor (need to do this with // the spinlock released because the descriptor is not // mapped). AccessState = IrpSp->Parameters.Create.SecurityContext->AccessState; status = SeAssignSecurity( NULL, // parent descriptor AccessState->SecurityDescriptor, &pAddr->sa_SecurityDescriptor, FALSE, // is directory &AccessState->SubjectSecurityContext, &AddressGenericMapping, NonPagedPool); if (!NT_SUCCESS(status)) { // Error, return status. IoRemoveShareAccess (IrpSp->FileObject, &pAddr->u.sa_ShareAccess); ExReleaseResource (&Device->dev_AddrResource); SpxAddrDereference (pAddr, AREF_ADDR_FILE); SpxAddrFileDestroy(pAddrFile); return status; } #endif ExReleaseResource (&Device->dev_AddrResource); // if the adapter isn't ready, we can't do any of this; get out #if defined(_PNP_POWER) if (Device->dev_State != DEVICE_STATE_OPEN) #else if (Device->dev_State == DEVICE_STATE_STOPPING) #endif _PNP_POWER { SpxAddrDereference (pAddr, AREF_ADDR_FILE); SpxAddrFileDestroy(pAddrFile); status = STATUS_DEVICE_NOT_READY; } else { REQUEST_OPEN_CONTEXT(Request) = (PVOID)pAddrFile; REQUEST_OPEN_TYPE(Request) = (PVOID)TDI_TRANSPORT_ADDRESS_FILE; #ifdef ISN_NT pAddrFile->saf_FileObject = IrpSp->FileObject; #endif CTEGetLock (&pAddr->sa_Lock, &LockHandleAddr); pAddrFile->saf_Addr = pAddr; pAddrFile->saf_AddrLock = &pAddr->sa_Lock; // Set flags appropriately, note spx/stream flags are set at this // point. pAddrFile->saf_Flags &= ~SPX_ADDRFILE_OPENING; pAddrFile->saf_Flags |= SPX_ADDRFILE_OPEN; // Queue in the address list, removed in destroy. pAddrFile->saf_Next = pAddr->sa_AddrFileList; pAddr->sa_AddrFileList = pAddrFile; CTEFreeLock (&pAddr->sa_Lock, LockHandleAddr); status = STATUS_SUCCESS; } } else { ExReleaseResource (&Device->dev_AddrResource); // If the address could not be created, and is not in the process of // being created, then we can't open up an address. SpxAddrFileDestroy(pAddrFile); } } else { CTEFreeLock (&Device->dev_Lock, LockHandle); DBGPRINT(ADDRESS, ERR, ("Add to address %lx\n", pAddr)); // The address already exists. Check the ACL and see if we // can access it. If so, simply use this address as our address. #ifdef ISN_NT AccessState = IrpSp->Parameters.Create.SecurityContext->AccessState; AccessAllowed = SeAccessCheck( pAddr->sa_SecurityDescriptor, &AccessState->SubjectSecurityContext, FALSE, // tokens locked IrpSp->Parameters.Create.SecurityContext->DesiredAccess, (ACCESS_MASK)0, // previously granted NULL, // privileges &AddressGenericMapping, Irp->RequestorMode, &GrantedAccess, &status); #else // ISN_NT AccessAllowed = TRUE; #endif // ISN_NT if (!AccessAllowed) { ExReleaseResource (&Device->dev_AddrResource); SpxAddrFileDestroy(pAddrFile); } else { #ifdef ISN_NT // Now check that we can obtain the desired share // access. We use read access to control all access. DesiredShareAccess = (ULONG) (((IrpSp->Parameters.Create.ShareAccess & FILE_SHARE_READ) || (IrpSp->Parameters.Create.ShareAccess & FILE_SHARE_WRITE)) ? FILE_SHARE_READ : 0); status = IoCheckShareAccess( FILE_READ_DATA, DesiredShareAccess, IrpSp->FileObject, &pAddr->u.sa_ShareAccess, TRUE); #else // ISN_NT status = STATUS_SUCCESS; #endif // ISN_NT if (!NT_SUCCESS (status)) { ExReleaseResource (&Device->dev_AddrResource); SpxAddrFileDestroy(pAddrFile); } else { ExReleaseResource (&Device->dev_AddrResource); CTEGetLock (&Device->dev_Lock, &LockHandle); CTEGetLock (&pAddr->sa_Lock, &LockHandleAddr); pAddrFile->saf_Addr = pAddr; pAddrFile->saf_AddrLock = &pAddr->sa_Lock; #ifdef ISN_NT pAddrFile->saf_FileObject = IrpSp->FileObject; #endif // Set flags appropriately, note spx/stream flags are set at this // point. pAddrFile->saf_Flags &= ~SPX_ADDRFILE_OPENING; pAddrFile->saf_Flags |= SPX_ADDRFILE_OPEN; SpxAddrLockReference (pAddr, AREF_ADDR_FILE); REQUEST_OPEN_CONTEXT(Request) = (PVOID)pAddrFile; REQUEST_OPEN_TYPE(Request) = (PVOID)TDI_TRANSPORT_ADDRESS_FILE; // Queue in the address list, removed in destroy. pAddrFile->saf_Next = pAddr->sa_AddrFileList; pAddr->sa_AddrFileList = pAddrFile; CTEFreeLock (&pAddr->sa_Lock, LockHandleAddr); CTEFreeLock (&Device->dev_Lock, LockHandle); status = STATUS_SUCCESS; } } // Remove the reference from SpxLookupAddress. SpxAddrDereference (pAddr, AREF_LOOKUP); } return status; } // SpxAddrOpen NTSTATUS SpxAddrSetEventHandler( IN PDEVICE Device, IN PREQUEST pRequest ) { CTELockHandle lockHandle; NTSTATUS status = STATUS_SUCCESS; PSPX_ADDR_FILE pSpxAddrFile = (PSPX_ADDR_FILE)REQUEST_OPEN_CONTEXT(pRequest); PTDI_REQUEST_KERNEL_SET_EVENT pParam = (PTDI_REQUEST_KERNEL_SET_EVENT)REQUEST_PARAMETERS(pRequest); if ((status = SpxAddrFileVerify(pSpxAddrFile)) != STATUS_SUCCESS) return(status); CTEGetLock(pSpxAddrFile->saf_AddrLock, &lockHandle); switch (pParam->EventType) { case TDI_EVENT_ERROR: break; case TDI_EVENT_CONNECT: pSpxAddrFile->saf_ConnHandler = (PTDI_IND_CONNECT)(pParam->EventHandler); pSpxAddrFile->saf_ConnHandlerCtx = pParam->EventContext; break; case TDI_EVENT_RECEIVE: pSpxAddrFile->saf_RecvHandler = (PTDI_IND_RECEIVE)(pParam->EventHandler); pSpxAddrFile->saf_RecvHandlerCtx = pParam->EventContext; break; case TDI_EVENT_DISCONNECT: pSpxAddrFile->saf_DiscHandler = (PTDI_IND_DISCONNECT)(pParam->EventHandler); pSpxAddrFile->saf_DiscHandlerCtx = pParam->EventContext; break; case TDI_EVENT_SEND_POSSIBLE : pSpxAddrFile->saf_SendPossibleHandler = (PTDI_IND_SEND_POSSIBLE)(pParam->EventHandler); pSpxAddrFile->saf_SendPossibleHandlerCtx = pParam->EventContext; break; case TDI_EVENT_RECEIVE_DATAGRAM: case TDI_EVENT_RECEIVE_EXPEDITED: default: status = STATUS_INVALID_PARAMETER; } CTEFreeLock(pSpxAddrFile->saf_AddrLock, lockHandle); SpxAddrFileDereference(pSpxAddrFile, AFREF_VERIFY); return(status); } PSPX_ADDR SpxAddrCreate( IN PDEVICE Device, IN USHORT Socket ) /*++ Routine Description: This routine creates a transport address and associates it with the specified transport device context. The reference count in the address is automatically set to 1, and the reference count of the device context is incremented. NOTE: This routine must be called with the Device spinlock held. Arguments: Device - Pointer to the device context (which is really just the device object with its extension) to be associated with the address. Socket - The socket to assign to this address. Return Value: The newly created address, or NULL if none can be allocated. --*/ { PSPX_ADDR pAddr; int index; CTELockHandle lockHandle; pAddr = (PSPX_ADDR)SpxAllocateZeroedMemory (sizeof(SPX_ADDR)); if (pAddr == NULL) { DBGPRINT(ADDRESS, INFO, ("Create address %lx failed\n", (ULONG)Socket)); return NULL; } DBGPRINT(ADDRESS, INFO, ("Create address %lx (%lx)\n", pAddr, (ULONG)Socket)); pAddr->sa_Type = SPX_ADDRESS_SIGNATURE; pAddr->sa_Size = sizeof (SPX_ADDR); pAddr->sa_Flags = 0; pAddr->sa_Device = Device; pAddr->sa_DeviceLock = &Device->dev_Lock; CTEInitLock (&pAddr->sa_Lock); // This reference is for the address file that will associated with this addr. pAddr->sa_RefCount = 1; #if DBG pAddr->sa_RefTypes[AREF_ADDR_FILE] = 1; #endif pAddr->sa_Socket = Socket; // Insert address into the device hash table. index = (int)(Socket & NUM_SPXADDR_HASH_MASK); CTEGetLock (&Device->dev_Lock, &lockHandle); pAddr->sa_Next = Device->dev_AddrHashTable[index]; Device->dev_AddrHashTable[index] = pAddr; CTEFreeLock (&Device->dev_Lock, lockHandle); SpxReferenceDevice (Device, DREF_ADDRESS); return pAddr; } // SpxAddrCreate NTSTATUS SpxAddrFileVerify( IN PSPX_ADDR_FILE pAddrFile ) /*++ Routine Description: This routine is called to verify that the pointer given us in a file object is in fact a valid address file object. We also verify that the address object pointed to by it is a valid address object, and reference it to keep it from disappearing while we use it. Arguments: AddressFile - potential pointer to a SPX_ADDR_FILE object Return Value: STATUS_SUCCESS if all is well; STATUS_INVALID_ADDRESS otherwise --*/ { CTELockHandle LockHandle; NTSTATUS status = STATUS_SUCCESS; PSPX_ADDR Address; // try to verify the address file signature. If the signature is valid, // verify the address pointed to by it and get the address spinlock. // check the address's state, and increment the reference count if it's // ok to use it. Note that the only time we return an error for state is // if the address is closing. try { if ((pAddrFile->saf_Size == sizeof (SPX_ADDR_FILE)) && (pAddrFile->saf_Type == SPX_ADDRESSFILE_SIGNATURE) ) { Address = pAddrFile->saf_Addr; if ((Address->sa_Size == sizeof (SPX_ADDR)) && (Address->sa_Type == SPX_ADDRESS_SIGNATURE) ) { CTEGetLock (&Address->sa_Lock, &LockHandle); if ((Address->sa_Flags & SPX_ADDR_CLOSING) == 0) { SpxAddrFileLockReference(pAddrFile, AFREF_VERIFY); } else { DBGPRINT(TDI, ERR, ("StVerifyAddressFile: A %lx closing\n", Address)); status = STATUS_INVALID_ADDRESS; } CTEFreeLock (&Address->sa_Lock, LockHandle); } else { DBGPRINT(TDI, ERR, ("StVerifyAddressFile: A %lx bad signature\n", Address)); status = STATUS_INVALID_ADDRESS; } } else { DBGPRINT(TDI, ERR, ("StVerifyAddressFile: AF %lx bad signature\n", pAddrFile)); status = STATUS_INVALID_ADDRESS; } } except(EXCEPTION_EXECUTE_HANDLER) { DBGPRINT(TDI, ERR, ("SpxAddrFileVerify: AF %lx exception\n", Address)); return GetExceptionCode(); } return status; } // SpxAddrFileVerify VOID SpxAddrDestroy( IN PVOID Parameter ) /*++ Routine Description: This routine destroys a transport address and removes all references made by it to other objects in the transport. The address structure is returned to nonpaged system pool. It is assumed that the caller has already removed all addressfile structures associated with this address. It is called from a worker thread queue by SpxDerefAddress when the reference count goes to 0. This thread is only queued by SpxDerefAddress. The reason for this is that there may be multiple streams of execution which are simultaneously referencing the same address object, and it should not be deleted out from under an interested stream of execution. Arguments: Address - Pointer to a transport address structure to be destroyed. Return Value: NTSTATUS - status of operation. --*/ { PSPX_ADDR pAddr, *ppAddr; CTELockHandle LockHandle; PSPX_ADDR Address = (PSPX_ADDR)Parameter; PDEVICE Device = Address->sa_Device; int index = (int)(Address->sa_Socket & NUM_SPXADDR_HASH_MASK); DBGPRINT(ADDRESS, INFO, ("Destroy address %lx\n", Address)); SeDeassignSecurity (&Address->sa_SecurityDescriptor); // Delink this address from its associated device context's address // database. To do this we must spin lock on the device context object, // not on the address. CTEGetLock (&Device->dev_Lock, &LockHandle); for (ppAddr = &Device->dev_AddrHashTable[index]; (pAddr = *ppAddr) != NULL;) { if (pAddr == Address) { *ppAddr = pAddr->sa_Next; break; } ppAddr = &pAddr->sa_Next; } CTEFreeLock (&Device->dev_Lock, LockHandle); SpxFreeMemory (Address); SpxDereferenceDevice (Device, DREF_ADDRESS); } #if DBG VOID SpxAddrRef( IN PSPX_ADDR Address ) /*++ Routine Description: This routine increments the reference count on a transport address. Arguments: Address - Pointer to a transport address object. Return Value: none. --*/ { CTEAssert (Address->sa_RefCount > 0); // not perfect, but... (VOID)SPX_ADD_ULONG ( &Address->sa_RefCount, 1, Address->sa_DeviceLock); } VOID SpxAddrLockRef( IN PSPX_ADDR Address ) /*++ Routine Description: This routine increments the reference count on a transport address when the device lock is already held. Arguments: Address - Pointer to a transport address object. Return Value: none. --*/ { CTEAssert (Address->sa_RefCount > 0); // not perfect, but... (VOID)SPX_ADD_ULONG ( &Address->sa_RefCount, 1, Address->sa_DeviceLock); } #endif VOID SpxAddrDeref( IN PSPX_ADDR Address ) /*++ Routine Description: This routine dereferences a transport address by decrementing the reference count contained in the structure. If, after being decremented, the reference count is zero, then this routine calls SpxDestroyAddress to remove it from the system. Arguments: Address - Pointer to a transport address object. Return Value: none. --*/ { ULONG oldvalue; oldvalue = SPX_ADD_ULONG ( &Address->sa_RefCount, (ULONG)-1, Address->sa_DeviceLock); // // If we have deleted all references to this address, then we can // destroy the object. It is okay to have already released the spin // lock at this point because there is no possible way that another // stream of execution has access to the address any longer. // CTEAssert (oldvalue != 0); if (oldvalue == 1) { #if ISN_NT ExInitializeWorkItem( &Address->u.sa_DestroyAddrQueueItem, SpxAddrDestroy, (PVOID)Address); ExQueueWorkItem(&Address->u.sa_DestroyAddrQueueItem, DelayedWorkQueue); #else SpxAddrDestroy(Address); #endif } } NTSTATUS SpxAddrFileCreate( IN PDEVICE Device, IN PREQUEST Request, OUT PSPX_ADDR_FILE * ppAddrFile ) /*++ Routine Description: This routine creates an address file from the pool of ther specified device context. The reference count in the address is automatically set to 1. Arguments: Device - Pointer to the device context (which is really just the device object with its extension) to be associated with the address. Return Value: The allocate address file or NULL. --*/ { NTSTATUS status; BYTE socketType; CTELockHandle LockHandle; PSPX_ADDR_FILE pAddrFile; // What is the address file type? if (!NT_SUCCESS(status = SpxUtilGetSocketType( REQUEST_OPEN_NAME(Request), &socketType))) { return(status); } pAddrFile = (PSPX_ADDR_FILE)SpxAllocateZeroedMemory (sizeof(SPX_ADDR_FILE)); if (pAddrFile == NULL) { DBGPRINT(ADDRESS, ERR, ("Create address file failed\n")); return STATUS_INSUFFICIENT_RESOURCES; } DBGPRINT(ADDRESS, INFO, ("Create address file %lx\n", pAddrFile)); CTEGetLock (&Device->dev_Lock, &LockHandle); pAddrFile->saf_Type = SPX_ADDRESSFILE_SIGNATURE; pAddrFile->saf_Size = sizeof (SPX_ADDR_FILE); pAddrFile->saf_Addr = NULL; #ifdef ISN_NT pAddrFile->saf_FileObject = NULL; #endif pAddrFile->saf_Device = Device; pAddrFile->saf_Flags = SPX_ADDRFILE_OPENING; if ((socketType == SOCKET1_TYPE_SEQPKT) || (socketType == SOCKET1_TYPE_STREAM)) { if (socketType == SOCKET1_TYPE_STREAM) { pAddrFile->saf_Flags |= SPX_ADDRFILE_STREAM; } } if ((socketType == SOCKET2_TYPE_SEQPKT) || (socketType == SOCKET2_TYPE_STREAM)) { pAddrFile->saf_Flags |= SPX_ADDRFILE_SPX2; if (socketType == SOCKET2_TYPE_STREAM) { pAddrFile->saf_Flags |= SPX_ADDRFILE_STREAM; } } pAddrFile->saf_RefCount = 1; #if DBG pAddrFile->saf_RefTypes[AFREF_CREATE] = 1; #endif pAddrFile->saf_CloseReq = (PREQUEST)NULL; // Initialize the request handlers. pAddrFile->saf_ConnHandler = pAddrFile->saf_ConnHandlerCtx = NULL; pAddrFile->saf_DiscHandler = pAddrFile->saf_DiscHandlerCtx = NULL; pAddrFile->saf_RecvHandler = pAddrFile->saf_RecvHandlerCtx = NULL; pAddrFile->saf_ErrHandler = pAddrFile->saf_ErrHandlerCtx = NULL; // Release lock CTEFreeLock (&Device->dev_Lock, LockHandle); // Put in the global list for our reference spxAddrInsertIntoGlobalList(pAddrFile); *ppAddrFile = pAddrFile; return STATUS_SUCCESS; } NTSTATUS SpxAddrFileDestroy( IN PSPX_ADDR_FILE pAddrFile ) /*++ Routine Description: This routine destroys an address file and removes all references made by it to other objects in the transport. This routine is only called by SpxAddrFileDereference. The reason for this is that there may be multiple streams of execution which are simultaneously referencing the same address file object, and it should not be deleted out from under an interested stream of execution. Arguments: pAddrFile Pointer to a transport address file structure to be destroyed. Return Value: NTSTATUS - status of operation. --*/ { CTELockHandle LockHandle, LockHandle1; PSPX_ADDR Address; PDEVICE Device; PREQUEST CloseRequest; PSPX_ADDR_FILE pRemAddr, *ppRemAddr; DBGPRINT(ADDRESS, INFO, ("Destroy address file %lx\n", pAddrFile)); Address = pAddrFile->saf_Addr; Device = pAddrFile->saf_Device; if (Address) { CTEGetLock (&Device->dev_Lock, &LockHandle1); // This addressfile was associated with an address. CTEGetLock (&Address->sa_Lock, &LockHandle); // If the last reference on the address is being removed, set the // closing flag to prevent further references. //if (Address->sa_RefCount == 1) // // ** The lock passed here is a dummy - it is pre-compiled out. // if (SPX_ADD_ULONG(&Address->sa_RefCount, 0, &Address->sa_Lock) == 1) { Address->sa_Flags |= SPX_ADDR_CLOSING; } // Dequeue the address file from the address list. for (ppRemAddr = &Address->sa_AddrFileList; (pRemAddr = *ppRemAddr) != NULL;) { if (pRemAddr == pAddrFile) { *ppRemAddr = pRemAddr->saf_Next; break; } ppRemAddr = &pRemAddr->saf_Next; } pAddrFile->saf_Addr = NULL; #ifdef ISN_NT pAddrFile->saf_FileObject->FsContext = NULL; pAddrFile->saf_FileObject->FsContext2 = NULL; #endif CTEFreeLock (&Address->sa_Lock, LockHandle); CTEFreeLock (&Device->dev_Lock, LockHandle1); // We will already have been removed from the ShareAccess // of the owning address. // // Now dereference the owning address. SpxAddrDereference(Address, AREF_ADDR_FILE); } // Save this for later completion. CloseRequest = pAddrFile->saf_CloseReq; // Remove from the global list spxAddrRemoveFromGlobalList(pAddrFile); // return the addressFile to the pool of address files SpxFreeMemory (pAddrFile); if (CloseRequest != (PREQUEST)NULL) { REQUEST_INFORMATION(CloseRequest) = 0; REQUEST_STATUS(CloseRequest) = STATUS_SUCCESS; SpxCompleteRequest (CloseRequest); SpxFreeRequest (Device, CloseRequest); } return STATUS_SUCCESS; } #if DBG VOID SpxAddrFileRef( IN PSPX_ADDR_FILE pAddrFile ) /*++ Routine Description: This routine increments the reference count on an address file. Arguments: pAddrFile - Pointer to a transport address file object. Return Value: none. --*/ { CTEAssert (pAddrFile->saf_RefCount > 0); // not perfect, but... (VOID)SPX_ADD_ULONG ( &pAddrFile->saf_RefCount, 1, pAddrFile->saf_AddrLock); } // SpxRefAddressFile VOID SpxAddrFileLockRef( IN PSPX_ADDR_FILE pAddrFile ) /*++ Routine Description: This routine increments the reference count on an address file. IT IS CALLED WITH THE ADDRESS LOCK HELD. Arguments: pAddrFile - Pointer to a transport address file object. Return Value: none. --*/ { CTEAssert (pAddrFile->saf_RefCount > 0); // not perfect, but... (VOID)SPX_ADD_ULONG ( &pAddrFile->saf_RefCount, 1, pAddrFile->saf_AddrLock); } #endif VOID SpxAddrFileDeref( IN PSPX_ADDR_FILE pAddrFile ) /*++ Routine Description: This routine dereferences an address file by decrementing the reference count contained in the structure. If, after being decremented, the reference count is zero, then this routine calls SpxDestroyAddressFile to remove it from the system. Arguments: pAddrFile - Pointer to a transport address file object. Return Value: none. --*/ { ULONG oldvalue; oldvalue = SPX_ADD_ULONG ( &pAddrFile->saf_RefCount, (ULONG)-1, pAddrFile->saf_AddrLock); // If we have deleted all references to this address file, then we can // destroy the object. It is okay to have already released the spin // lock at this point because there is no possible way that another // stream of execution has access to the address any longer. CTEAssert (oldvalue > 0); if (oldvalue == 1) { SpxAddrFileDestroy(pAddrFile); } } PSPX_ADDR SpxAddrLookup( IN PDEVICE Device, IN USHORT Socket ) /*++ Routine Description: This routine scans the transport addresses defined for the given device context and compares them with the specified NETWORK NAME values. If an exact match is found, then a pointer to the ADDRESS object is returned, and as a side effect, the reference count to the address object is incremented. If the address is not found, then NULL is returned. NOTE: This routine must be called with the Device spinlock held. Arguments: Device - Pointer to the device object and its extension. Socket - The socket to look up. Return Value: Pointer to the ADDRESS object found, or NULL if not found. --*/ { PSPX_ADDR Address; int index = (int)(Socket & NUM_SPXADDR_HASH_MASK); for (Address = Device->dev_AddrHashTable[index]; Address != NULL; Address = Address->sa_Next) { if ((Address->sa_Flags & SPX_ADDR_CLOSING) != 0) { continue; } if (Address->sa_Socket == Socket) { // We found the match. Bump the reference count on the address, and // return a pointer to the address object for the caller to use. SpxAddrLockReference(Address, AREF_LOOKUP); return Address; } } // The specified address was not found. return NULL; } BOOLEAN SpxAddrExists( IN PDEVICE Device, IN USHORT Socket ) /*++ Routine Description: NOTE: This routine must be called with the Device spinlock held. Arguments: Device - Pointer to the device object and its extension. Socket - The socket to look up. Return Value: TRUE if so, else FALSE --*/ { PSPX_ADDR Address; int index = (int)(Socket & NUM_SPXADDR_HASH_MASK); for (Address = Device->dev_AddrHashTable[index]; Address != NULL; Address = Address->sa_Next) { if ((Address->sa_Flags & SPX_ADDR_CLOSING) != 0) { continue; } if (Address->sa_Socket == Socket) { // We found the match return TRUE; } } // The specified address was not found. return FALSE; } // SpxAddrExists NTSTATUS SpxAddrConnByRemoteIdAddrLock( IN PSPX_ADDR pSpxAddr, IN USHORT SrcConnId, IN PBYTE SrcIpxAddr, OUT PSPX_CONN_FILE *ppSpxConnFile ) { PSPX_CONN_FILE pSpxConnFile; NTSTATUS status = STATUS_INVALID_CONNECTION; for (pSpxConnFile = pSpxAddr->sa_ActiveConnList; pSpxConnFile != NULL; pSpxConnFile = pSpxConnFile->scf_Next) { if ((pSpxConnFile->scf_RemConnId == SrcConnId) && (*((UNALIGNED ULONG *)SrcIpxAddr) == *((UNALIGNED ULONG *)pSpxConnFile->scf_RemAddr)) && (*(UNALIGNED ULONG *)(SrcIpxAddr+4) == *(UNALIGNED ULONG *)(pSpxConnFile->scf_RemAddr+4)) && (*(UNALIGNED ULONG *)(SrcIpxAddr+8) == *(UNALIGNED ULONG *)(pSpxConnFile->scf_RemAddr+8))) { SpxConnFileReference(pSpxConnFile, CFREF_ADDR); *ppSpxConnFile = pSpxConnFile; status = STATUS_SUCCESS; break; } } return(status); } NTSTATUS SpxAddrFileStop( IN PSPX_ADDR_FILE pAddrFile, IN PSPX_ADDR Address ) /*++ Routine Description: This routine is called to terminate all activity on an pAddrFile and destroy the object. We remove every connection and datagram associated with this addressfile from the address database and terminate their activity. Then, if there are no other outstanding addressfiles open on this address, the address will go away. Arguments: pAddrFile - pointer to the addressFile to be stopped Address - the owning address for this addressFile (we do not depend upon the pointer in the addressFile because we want this routine to be safe) Return Value: STATUS_SUCCESS if all is well, STATUS_INVALID_HANDLE if the request is not for a real address. --*/ { PSPX_CONN_FILE pSpxConnFile, pSpxConnFileNext; CTELockHandle LockHandle; DBGPRINT(ADDRESS, DBG, ("SpxAddrFileStop: %lx\n", pAddrFile)); CTEGetLock (&Address->sa_Lock, &LockHandle); if (pAddrFile->saf_Flags & SPX_ADDRFILE_CLOSING) { CTEFreeLock (&Address->sa_Lock, LockHandle); return STATUS_SUCCESS; } pAddrFile->saf_Flags |= SPX_ADDRFILE_CLOSING; pSpxConnFileNext = NULL; if (pSpxConnFile = pAddrFile->saf_AssocConnList) { pSpxConnFileNext = pSpxConnFile; SpxConnFileReference(pSpxConnFile, CFREF_ADDR); } while (pSpxConnFile) { if (pSpxConnFileNext = pSpxConnFile->scf_AssocNext) { SpxConnFileReference(pSpxConnFileNext, CFREF_ADDR); } CTEFreeLock (&Address->sa_Lock, LockHandle); DBGPRINT(CREATE, INFO, ("SpxAddrFileClose: Assoc conn stop %lx when %lx\n", pSpxConnFile, pSpxConnFile->scf_RefCount)); SpxConnStop(pSpxConnFile); SpxConnFileDereference(pSpxConnFile, CFREF_ADDR); CTEGetLock (&Address->sa_Lock, &LockHandle); pSpxConnFile = pSpxConnFileNext; } CTEFreeLock (&Address->sa_Lock, LockHandle); return STATUS_SUCCESS; } NTSTATUS SpxAddrFileCleanup( IN PDEVICE Device, IN PREQUEST Request ) /*++ Routine Description: Arguments: Request - the close request. Return Value: STATUS_SUCCESS if all is well, STATUS_INVALID_HANDLE if the request does not point to a real address. --*/ { PSPX_ADDR Address; PSPX_ADDR_FILE pSpxAddrFile; NTSTATUS status; pSpxAddrFile = (PSPX_ADDR_FILE)REQUEST_OPEN_CONTEXT(Request); DBGPRINT(ADDRESS, INFO, ("SpxAddrFileCleanup: %lx\n", pSpxAddrFile)); status = SpxAddrFileVerify(pSpxAddrFile); if (!NT_SUCCESS (status)) { return(status); } // We assume that addressFile has already been verified // at this point. Address = pSpxAddrFile->saf_Addr; CTEAssert (Address); SpxAddrFileStop(pSpxAddrFile, Address); SpxAddrFileDereference(pSpxAddrFile, AFREF_VERIFY); return STATUS_SUCCESS; } NTSTATUS SpxAddrFileClose( IN PDEVICE Device, IN PREQUEST Request ) /*++ Routine Description: This routine is called to close the addressfile pointed to by a file object. If there is any activity to be run down, we will run it down before we terminate the addressfile. We remove every connection and datagram associated with this addressfile from the address database and terminate their activity. Then, if there are no other outstanding addressfiles open on this address, the address will go away. Arguments: Request - the close request. Return Value: STATUS_SUCCESS if all is well, STATUS_INVALID_HANDLE if the request does not point to a real address. --*/ { PSPX_ADDR Address; PSPX_ADDR_FILE pSpxAddrFile; NTSTATUS status; pSpxAddrFile = (PSPX_ADDR_FILE)REQUEST_OPEN_CONTEXT(Request); DBGPRINT(ADDRESS, DBG, ("SpxAddrFileClose: %lx\n", pSpxAddrFile)); status = SpxAddrFileVerify(pSpxAddrFile); if (!NT_SUCCESS (status)) { return(status); } pSpxAddrFile->saf_CloseReq = Request; // We assume that addressFile has already been verified // at this point. Address = pSpxAddrFile->saf_Addr; CTEAssert (Address); // Remove us from the access info for this address. ExAcquireResourceExclusive (&Device->dev_AddrResource, TRUE); #ifdef ISN_NT IoRemoveShareAccess (pSpxAddrFile->saf_FileObject, &Address->u.sa_ShareAccess); #endif ExReleaseResource (&Device->dev_AddrResource); SpxAddrFileDereference (pSpxAddrFile, AFREF_CREATE); SpxAddrFileDereference(pSpxAddrFile, AFREF_VERIFY); return STATUS_PENDING; } // SpxCloseAddressFile USHORT SpxAddrAssignSocket( IN PDEVICE Device ) /*++ Routine Description: This routine assigns a socket that is unique within a range of SocketUniqueness. Arguments: Device - Pointer to the device context. Return Value: The assigned socket number, or 0 if a unique one cannot be found. --*/ { BOOLEAN wrapped = FALSE; USHORT temp, Socket; // We have to auto-assign a socket. temp = Device->dev_CurrentSocket; PUTSHORT2SHORT( &Socket, Device->dev_CurrentSocket); while (TRUE) { Device->dev_CurrentSocket += (USHORT)PARAM(CONFIG_SOCKET_UNIQUENESS); if (Device->dev_CurrentSocket > PARAM(CONFIG_SOCKET_RANGE_END)) { Device->dev_CurrentSocket = (USHORT)PARAM(CONFIG_SOCKET_RANGE_START); wrapped = TRUE; } if (!SpxAddrExists (Device, Socket)) { break; } PUTSHORT2SHORT( &Socket, Device->dev_CurrentSocket); if (wrapped && (Device->dev_CurrentSocket >= temp)) { // If we have checked all possible values given SOCKET_UNIQUENESS... // This may actually return ERROR even if there are // available socket numbers although they may be // implicitly in use due to SOCKET_UNIQUENESS being // > 1. That is the way it is to work. Socket = 0; break; } } DBGPRINT(ADDRESS, INFO, ("OpenAddress, assigned socket %lx\n", Socket)); return(Socket); } VOID spxAddrInsertIntoGlobalList( IN PSPX_ADDR_FILE pSpxAddrFile ) /*++ Routine Description: Arguments: Return Value: --*/ { CTELockHandle lockHandle; // Get the global q lock CTEGetLock(&SpxGlobalQInterlock, &lockHandle); pSpxAddrFile->saf_GlobalNext = SpxGlobalAddrList; SpxGlobalAddrList = pSpxAddrFile; CTEFreeLock(&SpxGlobalQInterlock, lockHandle); return; } NTSTATUS spxAddrRemoveFromGlobalList( IN PSPX_ADDR_FILE pSpxAddrFile ) /*++ Routine Description: Arguments: Return Value: --*/ { CTELockHandle lockHandle; PSPX_ADDR_FILE pC, *ppC; NTSTATUS status = STATUS_SUCCESS; // Get the global q lock CTEGetLock(&SpxGlobalQInterlock, &lockHandle); for (ppC = &SpxGlobalAddrList; (pC = *ppC) != NULL;) { if (pC == pSpxAddrFile) { DBGPRINT(SEND, INFO, ("SpxAddrRemoveFromGlobal: %lx\n", pSpxAddrFile)); // Remove from list *ppC = pC->saf_GlobalNext; break; } ppC = &pC->saf_GlobalNext; } CTEFreeLock(&SpxGlobalQInterlock, lockHandle); if (pC == NULL) status = STATUS_INVALID_ADDRESS; return(status); }