/*** z.c - top level for editor * * Copyright 1988, Microsoft Corporation * * Revision History: * 26-Nov-1991 mz Strip off near/far *************************************************************************/ #include "z.h" #pragma hdrstop #include "version.h" #define DEBFLAG Z /* * use double macro level to force rup to be turned into string representation */ #define VER(x,y,z) VER2(x,y,z) #define VER2(x,y,z) "Version "###x##"."###y"."###z" "szVerName char Name[] = "Microsoft (R) Editor"; char Version[] = VER(rmj,rmm,rup); char CopyRight[] = "Copyright (C) Microsoft Corp 1987-1995. All rights reserved"; /*** main - program entry * * Input: * C standard command line parameters. Recognizes: * * /e string - Execute string of commands on startup * /t - Following file is "temporary", not kept in file history * /D - Don't read tools.ini * /r - Global no-edit mode (can't edit files) * /m markname - Start up at given mark * /pwb - Start as PWB * * When the editor is built with DEBUG defined, the following are also * recognized: * * /d debflags - Specifies which debugging to turn on * /f filename - Specifies file for debug output * * The following are present in the CW version of the editor only. They are * for testing only and should NOT be documented: * * /vt tapename- Set tape name * /vr - Record messages to file "default.key" * /vp - Play back messages from file "default.key" * /vd digit - Set playback delay from 0 to 9 * * * Output: * Returns nothing. Exits via CleanExit() * * Exceptions: * Various and sundry, based on program operation * *************************************************************************/ void _CRTAPI1 main ( int c, char **v ) { char *pExecute = NULL; /* string to execute on start */ char *szMark = NULL; /* mark to go to on start */ char *szName = v[0]; /* ptr to invokation name */ flagType InLoop = TRUE; ConvertAppToOem( c, v ); SHIFT(c,v); #if DEBUG debug = 0; //debfh = stdout; #endif while (c && fSwitChr (**v) && InLoop) { switch ((*v)[1]) { #if DEBUG case 'f': case 'F': SHIFT(c,v); if ((debfh = ZFOpen(*v, ACCESSMODE_WRITE, SHAREMODE_RW, TRUE)) == NULL) { printf("Can't open %s for debug output - using stdout\n", *v); //debfh = stdout; } // setbuf(debfh, NULL); break; #endif case 'e': case 'E': // // /e command to execute // if ( c > 1 ) { SHIFT (c, v); pExecute = *v; } break; case 't': case 'T': // // /t next file is temporary .. don't keep in file history // InLoop = FALSE; break; #if DEBUG case 'd': // // /d### debug level // SHIFT(c,v); debug = ntoi (*v, 16); break; #else case 'd': #endif case 'D': // // /D don't read tools.ini // fDefaults = TRUE; break; case 'r': case 'R': // // /r Enter with noedit // fGlobalRO = TRUE; break; case 'm': case 'M': // // /m markname - start at markname // SHIFT(c,v); szMark = *v; default: printf ("%s %s\n", Name, Version); printf ("%s\n", CopyRight); printf("Usage: %s [/D] [/e cmd-string] [/m mark] [/r] [[/t] filename]*\n", szName); fSaveScreen = FALSE; exit(1); break; } if (InLoop) { SHIFT(c,v); } } InitNames (szName); cArgs = c; pArgs = v; // assert (_heapchk() == _HEAPOK); /* * At this point, command line arguments have been processed. Continue with * initialization. */ if (!init ()) { CleanExit (1, CE_VM); } /* * based on the re-entry state, take appropriate initial action: * - PWB_ENTRY: process rest of command line * - PWB_COMPILE: read compile log, and go to first error in log * - PWB_SHELL: do nothing */ if (szMark) { GoToMark; } domessage (CopyRight); Display (); /* * execute autostart macro if present */ if (NameToFunc ("autostart")) { fExecute ("autostart"); Display (); } /* * execute command line /e parameter if present */ if (pExecute) { fExecute (pExecute); } TopLoop (); CleanExit (0, CE_VM | CE_SIGNALS | CE_STATE); } /*** TopLoop - read a command and execute it until termination * * We read commands from the editor input and send them to the proper * recipients. We continue to do this until a termination flag is seen. * * Input: * None * * Output: * Returns nothing * *************************************************************************/ void TopLoop ( void ) { PCMD pFuncPrev = &cmdUnassigned; while (!fBreak) { PCMD pFunc = zloop (ZL_CMD | ZL_BRK); if (pFunc != NULL) { /* if prev wasn't graphic or this wasn't graphic then * log a boundary */ if (pFuncPrev->func != graphic || pFunc->func != graphic) { LogBoundary (); } fRetVal = SendCmd (pFunc); if (pFunc->func != cancel) { if (fCtrlc) { DoCancel (); } } pFuncPrev = pFunc; } } fBreak = FALSE; } /*** zloop - read next command, potentially updating screen * * zloop updates screen until a command is read that is not a macro * invocation. If a macro invocation is seen then just execute it and * continue. The reason for this is that the macro invocation will set up a * new input context that we'll retrieve in the next loop. * * We call RecordCmd for each command, in case we have recording on. If * the user has done , we record macro names, not their * values. This is because a macro with flow control, especially a loop, * will behave badly (possibly hang) because none of the editing commands * return values. * * Input: * flags - ZL_CMD command key, should be an event * - ZL_BRK take fBreak into account * * Output: * Returns a pointer to command structure that is next to be executed * *************************************************************************/ PCMD zloop ( flagType flags ) { REGISTER PCMD pFunc; EVTargs e; while (!fBreak || !TESTFLAG(flags, ZL_BRK)) { /* * Between every command, check heap and pfile list consistancy */ // assert (_heapchk() == _HEAPOK); // assert (_pfilechk()); /* if macro in progress then */ if (mtest ()) { pFunc = mGetCmd (); } else { DoDisplay (); do { pFunc = ReadCmd (); e.arg.key = keyCmd.KeyInfo; if (!TESTFLAG(flags, ZL_CMD)) { break; } } while (DeclareEvent (EVT_KEY, (EVTargs *)&e)); } if (pFunc != NULL) { RecordCmd (pFunc); if (pFunc->func == macro) { fRetVal = SendCmd (pFunc); } else { break; } } } return pFunc; } /*** Idle & IdleThread - Code executed at idle time * * Idle loop. Structured so that only ONE idle-item does something each time * though the loop. Ensures minimum exit delay. When nothing has * happened we sleep a bit each time, to make sure we're not hogging the CPU. * * Also causes the screen to be updated, if need be. * * Idle is structure so that routines which it calls return either: * TRUE - idle processing done, perhaps more to be done * FALSE - no idle processing done, and no more anticipated. * * Input: * none * * Output: * Returns nothing * *************************************************************************/ void IdleThread ( void ) { while (TRUE) { WaitForSingleObject( semIdle, INFINITE); Idle(); SetEvent( semIdle ); Sleep(100L); } } flagType Idle ( void ) { if (TESTFLAG (fDisplay, (RTEXT | RCURSOR | RSTATUS))) { DoDisplay (); } if (!DeclareEvent (EVT_IDLE, NULL)) { if (!fIdleUndo (FALSE)) { return FALSE; } } /* * got here, means someone processed idle, and may have more to do */ return TRUE; } /*** IntError - Internal error Processor. * * Allow user to abort, or attempt to continue. * * Input: * p = pointer to error string * * Output: * Returns only if user says to. * *************************************************************************/ void IntError ( char *p ) { static char pszMsg [] = "Z internal error - %s, continue? "; if ( OriginalScreen ) { consoleSetCurrentScreen( OriginalScreen ); } printf ("\n"); if (TESTFLAG (fInit, INIT_VIDEO)) { if (!confirmx (pszMsg, p)) { #if DEBUG fflush (debfh); #endif CleanExit (1, CE_STATE); } else { ; } } else { printf (pszMsg, p); CleanExit (1, FALSE); } }