39 files changed, 96 insertions, 8512 deletions

diff --git a/Android.mk b/Android.mk
index f4f4f2e07..3433d093a 100644
--- a/Android.mk
+++ b/Android.mk
@@ -252,38 +252,14 @@ endif
 ifeq ($(TW_NO_EXFAT_FUSE), true)
     LOCAL_CFLAGS += -DTW_NO_EXFAT_FUSE
 endif
-ifeq ($(TW_INCLUDE_CRYPTO), true)
-    LOCAL_CFLAGS += -DTW_INCLUDE_CRYPTO
-    LOCAL_CFLAGS += -DCRYPTO_FS_TYPE=\"$(TW_CRYPTO_FS_TYPE)\"
-    LOCAL_CFLAGS += -DCRYPTO_REAL_BLKDEV=\"$(TW_CRYPTO_REAL_BLKDEV)\"
-    LOCAL_CFLAGS += -DCRYPTO_MNT_POINT=\"$(TW_CRYPTO_MNT_POINT)\"
-    LOCAL_CFLAGS += -DCRYPTO_FS_OPTIONS=\"$(TW_CRYPTO_FS_OPTIONS)\"
-    LOCAL_CFLAGS += -DCRYPTO_FS_FLAGS=\"$(TW_CRYPTO_FS_FLAGS)\"
-    LOCAL_CFLAGS += -DCRYPTO_KEY_LOC=\"$(TW_CRYPTO_KEY_LOC)\"
-ifeq ($(TW_INCLUDE_CRYPTO_SAMSUNG), true)
-    LOCAL_CFLAGS += -DTW_INCLUDE_CRYPTO_SAMSUNG=\"$(TW_INCLUDE_CRYPTO_SAMSUNG)\"
-    ifdef TW_CRYPTO_SD_REAL_BLKDEV
-        LOCAL_CFLAGS += -DCRYPTO_SD_REAL_BLKDEV=\"$(TW_CRYPTO_SD_REAL_BLKDEV)\"
-        LOCAL_CFLAGS += -DCRYPTO_SD_FS_TYPE=\"$(TW_CRYPTO_SD_FS_TYPE)\"
-    endif
-    #LOCAL_LDFLAGS += -L$(TARGET_OUT_SHARED_LIBRARIES) -lsec_km
-    LOCAL_LDFLAGS += -ldl
-    LOCAL_STATIC_LIBRARIES += libcrypt_samsung
-endif
-    LOCAL_SHARED_LIBRARIES += libcryptfsics
-    #LOCAL_SRC_FILES += crypto/ics/cryptfs.c
-    #LOCAL_C_INCLUDES += system/extras/ext4_utils external/openssl/include
-endif
 ifeq ($(TW_INCLUDE_JB_CRYPTO), true)
-    LOCAL_CFLAGS += -DTW_INCLUDE_CRYPTO
-    LOCAL_CFLAGS += -DTW_INCLUDE_JB_CRYPTO
-    LOCAL_SHARED_LIBRARIES += libcryptfsjb
-    #LOCAL_SRC_FILES += crypto/jb/cryptfs.c
-    #LOCAL_C_INCLUDES += system/extras/ext4_utils external/openssl/include
+    TW_INCLUDE_CRYPTO := true
 endif
 ifeq ($(TW_INCLUDE_L_CRYPTO), true)
+    TW_INCLUDE_CRYPTO := true
+endif
+ifeq ($(TW_INCLUDE_CRYPTO), true)
     LOCAL_CFLAGS += -DTW_INCLUDE_CRYPTO
-    LOCAL_CFLAGS += -DTW_INCLUDE_L_CRYPTO
     LOCAL_SHARED_LIBRARIES += libcryptfslollipop
 endif
 ifeq ($(TW_USE_MODEL_HARDWARE_ID_FOR_DEVICE_ID), true)
@@ -374,12 +350,6 @@ endif
 ifneq ($(TW_NO_EXFAT_FUSE), true)
     LOCAL_ADDITIONAL_DEPENDENCIES += exfat-fuse
 endif
-ifeq ($(TW_INCLUDE_CRYPTO), true)
-    LOCAL_ADDITIONAL_DEPENDENCIES += cryptfs cryptsettings
-endif
-ifeq ($(TW_INCLUDE_JB_CRYPTO), true)
-    LOCAL_ADDITIONAL_DEPENDENCIES += getfooter
-endif
 ifeq ($(TW_INCLUDE_FB2PNG), true)
     LOCAL_ADDITIONAL_DEPENDENCIES += fb2png
 endif
@@ -513,8 +483,6 @@ include $(commands_recovery_local_path)/injecttwrp/Android.mk \
     $(commands_recovery_local_path)/flashutils/Android.mk \
     $(commands_recovery_local_path)/pigz/Android.mk \
     $(commands_recovery_local_path)/libtar/Android.mk \
-    $(commands_recovery_local_path)/crypto/cryptsettings/Android.mk \
-    $(commands_recovery_local_path)/crypto/cryptfs/Android.mk \
     $(commands_recovery_local_path)/libcrecovery/Android.mk \
     $(commands_recovery_local_path)/libblkid/Android.mk \
     $(commands_recovery_local_path)/minuitwrp/Android.mk \
@@ -528,19 +496,9 @@ ifneq ($(TARGET_ARCH), arm64)
     include $(commands_recovery_local_path)/dosfstools/Android.mk
 endif
 
-ifeq ($(TW_INCLUDE_CRYPTO_SAMSUNG), true)
-    include $(commands_recovery_local_path)/crypto/libcrypt_samsung/Android.mk
-endif
-
-ifeq ($(TW_INCLUDE_JB_CRYPTO), true)
-    include $(commands_recovery_local_path)/crypto/jb/Android.mk
-    include $(commands_recovery_local_path)/crypto/fs_mgr/Android.mk
-    include $(commands_recovery_local_path)/crypto/logwrapper/Android.mk
-    include $(commands_recovery_local_path)/crypto/scrypt/Android.mk
-    include $(commands_recovery_local_path)/crypto/crypttools/Android.mk
-endif
-ifeq ($(TW_INCLUDE_L_CRYPTO), true)
+ifeq ($(TW_INCLUDE_CRYPTO), true)
     include $(commands_recovery_local_path)/crypto/lollipop/Android.mk
+    include $(commands_recovery_local_path)/crypto/scrypt/Android.mk
 endif
 ifeq ($(PLATFORM_VERSION), 5.0.1)
     include $(commands_recovery_local_path)/minzip/Android.mk
@@ -558,9 +516,6 @@ endif
 ifneq ($(TW_NO_EXFAT_FUSE), true)
     include $(commands_recovery_local_path)/exfat/exfat-fuse/Android.mk
 endif
-ifeq ($(TW_INCLUDE_CRYPTO), true)
-    include $(commands_recovery_local_path)/crypto/ics/Android.mk
-endif
 ifneq ($(TW_OEM_BUILD),true)
     include $(commands_recovery_local_path)/orscmd/Android.mk
 endif
diff --git a/crypto/cryptfs/Android.mk b/crypto/cryptfs/Android.mk
deleted file mode 100644
index f0388c228..000000000
--- a/crypto/cryptfs/Android.mk
+++ /dev/null
@@ -1,54 +0,0 @@
-LOCAL_PATH:= $(call my-dir)
-include $(CLEAR_VARS)
-ifeq ($(TW_INCLUDE_CRYPTO), true)
-LOCAL_SRC_FILES:= \
-	cryptfs.c
-
-LOCAL_CFLAGS:= -g -c -W -I../fs_mgr/include
-LOCAL_CFLAGS += -DTW_INCLUDE_CRYPTO
-LOCAL_CFLAGS += -DCRYPTO_FS_TYPE=\"$(TW_CRYPTO_FS_TYPE)\"
-LOCAL_CFLAGS += -DCRYPTO_REAL_BLKDEV=\"$(TW_CRYPTO_REAL_BLKDEV)\"
-LOCAL_CFLAGS += -DCRYPTO_MNT_POINT=\"$(TW_CRYPTO_MNT_POINT)\"
-LOCAL_CFLAGS += -DCRYPTO_FS_OPTIONS=\"$(TW_CRYPTO_FS_OPTIONS)\"
-LOCAL_CFLAGS += -DCRYPTO_FS_FLAGS=\"$(TW_CRYPTO_FS_FLAGS)\"
-LOCAL_CFLAGS += -DCRYPTO_KEY_LOC=\"$(TW_CRYPTO_KEY_LOC)\"
-ifdef TW_CRYPTO_SD_REAL_BLKDEV
-    LOCAL_CFLAGS += -DCRYPTO_SD_REAL_BLKDEV=\"$(TW_CRYPTO_SD_REAL_BLKDEV)\"
-    LOCAL_CFLAGS += -DCRYPTO_SD_FS_TYPE=\"$(TW_CRYPTO_SD_FS_TYPE)\"
-endif
-ifneq ($(TW_INTERNAL_STORAGE_PATH),)
-	LOCAL_CFLAGS += -DTW_INTERNAL_STORAGE_PATH=$(TW_INTERNAL_STORAGE_PATH)
-endif
-ifneq ($(TW_INTERNAL_STORAGE_MOUNT_POINT),)
-	LOCAL_CFLAGS += -DTW_INTERNAL_STORAGE_MOUNT_POINT=$(TW_INTERNAL_STORAGE_MOUNT_POINT)
-endif
-ifneq ($(TW_EXTERNAL_STORAGE_PATH),)
-	LOCAL_CFLAGS += -DTW_EXTERNAL_STORAGE_PATH=$(TW_EXTERNAL_STORAGE_PATH)
-endif
-ifneq ($(TW_EXTERNAL_STORAGE_MOUNT_POINT),)
-	LOCAL_CFLAGS += -DTW_EXTERNAL_STORAGE_MOUNT_POINT=$(TW_EXTERNAL_STORAGE_MOUNT_POINT)
-endif
-
-LOCAL_C_INCLUDES += system/extras/ext4_utils external/openssl/include
-LOCAL_MODULE:=cryptfs
-LOCAL_MODULE_TAGS:= eng
-LOCAL_SHARED_LIBRARIES += libc libcutils
-LOCAL_SHARED_LIBRARIES += libcrypto
-
-
-#LOCAL_LDFLAGS += -L$(TARGET_OUT_SHARED_LIBRARIES) -lsec_km -lsec_ecryptfs -ldl
-LOCAL_LDFLAGS += -ldl
-
-LOCAL_STATIC_LIBRARIES += libmtdutils
-LOCAL_STATIC_LIBRARIES += libminzip libunz
-LOCAL_STATIC_LIBRARIES += libpixelflinger_static libpng libmincrypttwrp
-LOCAL_SHARED_LIBRARIES += libz libc libstlport libcutils libstdc++ libext4_utils
-LOCAL_STATIC_LIBRARIES += libcrypt_samsung
-
-
-LOCAL_STATIC_LIBRARIES += $(TARGET_RECOVERY_UI_LIB)
-#LOCAL_STATIC_LIBRARIES += libfs_mgrtwrp
-LOCAL_MODULE_CLASS := UTILITY_EXECUTABLES
-LOCAL_MODULE_PATH := $(PRODUCT_OUT)/utilities
-include $(BUILD_EXECUTABLE)
-endif
diff --git a/crypto/cryptfs/cryptfs.c b/crypto/cryptfs/cryptfs.c
deleted file mode 100644
index 59e7added..000000000
--- a/crypto/cryptfs/cryptfs.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (c) 2013 a3955269 all rights reversed, no rights reserved.
- */
-
-#define TW_INCLUDE_CRYPTO_SAMSUNG
-#include "../ics/cryptfs.c"
-
-int dm_remove_device(const char *name)
-{
-    int r;
-    r = delete_crypto_blk_dev(name);
-    if(!r)
-        printf("crypto block device '%s' deleted.\n", name);
-    else
-        printf("deleting crypto block device '%s' failed. [%d - %s]\n", name, r, strerror(errno));
-    return r;
-}
-
-int ecryptfs_test(const char *pw)
-{
-   char pwbuf[256];
-   int r;
-
-   strcpy(pwbuf, pw);
-   // 0: building options without file encryption filtering.
-   // 1: building options with media files filtering.
-   // 2: building options with all new files filtering.
-   r = mount_ecryptfs_drive(pwbuf, "/emmc", "/emmc", 0);
-   printf("mount_ecryptfs_drive: %d\n", r);
-   r = mount("/dev/block/mmcblk1", "/emmc", "vfat", MS_RDONLY, "");
-   printf("mount: %d\n", r);
-
-   r = umount("/emmc");///dev/block/mmcblk1");
-   printf("umount: %d\n", r);
-
-   //r = unmount_ecryptfs_drive("/emmc");
-   //printf("unmount_ecryptfs_drive: %d\n", r);
-
-   return r;
-}
-
-int main(int argc, char* argv[])
-{
-    if(argc < 2)
-    {
-        printf("no args!\n");
-        return 1;
-    }
-
-    property_set("ro.crypto.state", "encrypted");
-
-    property_set("ro.crypto.fs_type", CRYPTO_FS_TYPE);
-    property_set("ro.crypto.fs_real_blkdev", CRYPTO_REAL_BLKDEV);
-    property_set("ro.crypto.fs_mnt_point", CRYPTO_MNT_POINT);
-    property_set("ro.crypto.fs_options", CRYPTO_FS_OPTIONS);
-    property_set("ro.crypto.fs_flags", CRYPTO_FS_FLAGS);
-    property_set("ro.crypto.keyfile.userdata", CRYPTO_KEY_LOC);
-
-#ifdef CRYPTO_SD_FS_TYPE
-    property_set("ro.crypto.sd_fs_type", CRYPTO_SD_FS_TYPE);
-    property_set("ro.crypto.sd_fs_real_blkdev", CRYPTO_SD_REAL_BLKDEV);
-    property_set("ro.crypto.sd_fs_mnt_point", EXPAND(TW_INTERNAL_STORAGE_PATH));
-#endif
-
-    property_set("rw.km_fips_status", "ready");
-
-    delete_crypto_blk_dev("userdata");
-    delete_crypto_blk_dev("sdcard");
-    delete_crypto_blk_dev("emmc");
-
-    cryptfs_check_passwd(argv[1]);
-
-    return 0;
-};
diff --git a/crypto/cryptsettings/Android.mk b/crypto/cryptsettings/Android.mk
deleted file mode 100644
index 3a5704891..000000000
--- a/crypto/cryptsettings/Android.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-LOCAL_PATH:= $(call my-dir)
-include $(CLEAR_VARS)
-ifeq ($(TW_INCLUDE_CRYPTO), true)
-LOCAL_SRC_FILES:= \
-	cryptsettings.c
-LOCAL_CFLAGS:= -g -c -W
-LOCAL_MODULE:=cryptsettings
-LOCAL_MODULE_TAGS:= eng
-LOCAL_SHARED_LIBRARIES += libc libcutils
-ifeq ($(TW_INCLUDE_JB_CRYPTO), true)
-LOCAL_CFLAGS += -DTW_INCLUDE_JB_CRYPTO
-LOCAL_STATIC_LIBRARIES += libfs_mgrtwrp
-endif
-LOCAL_MODULE_CLASS := UTILITY_EXECUTABLES
-LOCAL_MODULE_PATH := $(PRODUCT_OUT)/utilities
-include $(BUILD_EXECUTABLE)
-endif
diff --git a/crypto/cryptsettings/cryptsettings.c b/crypto/cryptsettings/cryptsettings.c
deleted file mode 100644
index 4fa2b9354..000000000
--- a/crypto/cryptsettings/cryptsettings.c
+++ /dev/null
@@ -1,55 +0,0 @@
-#include <sys/types.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#ifdef TW_INCLUDE_JB_CRYPTO
-#include "../crypto/fs_mgr/include/fs_mgr.h"
-#endif
-
-#include "cutils/properties.h"
-
-#ifndef PROPERTY_VALUE_MAX
-#define PROPERTY_VALUE_MAX 255
-#endif
-#ifndef FSTAB_PREFIX
-#define FSTAB_PREFIX "/fstab."
-#endif
-
-int main(void)
-{
-	char prop[PROPERTY_VALUE_MAX];
-	char key_loc[PROPERTY_VALUE_MAX];
-	char blk_dev[PROPERTY_VALUE_MAX];
-	char fstab_filename[PROPERTY_VALUE_MAX + sizeof(FSTAB_PREFIX)];
-
-	printf("This tool will gather the build flags needed for decryption support for TWRP.\n");
-	printf("This tool comes with no warranties whatsoever.\n");
-	printf("http://teamw.in\n\n");
-	property_get("ro.crypto.state", prop, "encrypted");
-	if (strcmp(prop, "encrypted") != 0)
-		printf("Your device is not encrypted, continuing anyway.\n\nTW_INCLUDE_CRYPTO := true\n");
-	property_get("ro.crypto.fs_type", prop, "ERROR");
-	printf("TW_CRYPTO_FS_TYPE := \"%s\"\n", prop);
-	property_get("ro.crypto.fs_real_blkdev", prop, "ERROR");
-	printf("TW_CRYPTO_REAL_BLKDEV := \"%s\"\n", prop);
-	property_get("ro.crypto.fs_mnt_point", prop, "ERROR");
-	printf("TW_CRYPTO_MNT_POINT := \"%s\"\n", prop);
-	property_get("ro.crypto.fs_options", prop, "ERROR");
-	printf("TW_CRYPTO_FS_OPTIONS := \"%s\"\n", prop);
-	property_get("ro.crypto.fs_flags", prop, "ERROR");
-	printf("TW_CRYPTO_FS_FLAGS := \"%s\"\n", prop);
-	property_get("ro.crypto.keyfile.userdata", prop, "footer");
-	printf("TW_CRYPTO_KEY_LOC := \"%s\"\n", prop);
-#ifdef TW_INCLUDE_JB_CRYPTO
-	printf("\n*** NEW FOR JELLY BEAN:\n");
-	strcpy(fstab_filename, FSTAB_PREFIX);
-	property_get("ro.hardware", fstab_filename + sizeof(FSTAB_PREFIX) - 1, "");
-	fs_mgr_get_crypt_info(fstab_filename, key_loc, blk_dev, sizeof(key_loc));
-	printf("fstab file location: '%s'\n\nTW_INCLUDE_JB_CRYPTO := true\n", fstab_filename);
-#endif
-
-	return 0;
-}
diff --git a/crypto/crypttools/Android.mk b/crypto/crypttools/Android.mk
deleted file mode 100644
index fc62583c4..000000000
--- a/crypto/crypttools/Android.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-LOCAL_PATH:= $(call my-dir)
-include $(CLEAR_VARS)
-ifeq ($(TW_INCLUDE_JB_CRYPTO), true)
-LOCAL_SRC_FILES:= \
-	getfooter.c
-LOCAL_CFLAGS:= -g -c -W
-LOCAL_MODULE:=getfooter
-LOCAL_MODULE_TAGS:= eng
-LOCAL_STATIC_LIBRARIES += libfs_mgrtwrp libc libcutils
-LOCAL_MODULE_CLASS := UTILITY_EXECUTABLES
-LOCAL_MODULE_PATH := $(PRODUCT_OUT)/utilities
-LOCAL_FORCE_STATIC_EXECUTABLE := true
-LOCAL_C_INCLUDES := $(commands_recovery_local_path)/crypto/jb/
-include $(BUILD_EXECUTABLE)
-endif
\ No newline at end of file
diff --git a/crypto/crypttools/getfooter.c b/crypto/crypttools/getfooter.c
deleted file mode 100644
index aa7f88e84..000000000
--- a/crypto/crypttools/getfooter.c
+++ /dev/null
@@ -1,219 +0,0 @@
-#include <sys/types.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <sys/ioctl.h>
-#include <linux/dm-ioctl.h>
-#include <sys/mount.h>
-#include "../fs_mgr/include/fs_mgr.h"
-#include "cryptfs.h"
-
-#include "cutils/properties.h"
-
-#ifndef PROPERTY_VALUE_MAX
-#define PROPERTY_VALUE_MAX 255
-#endif
-#ifndef FSTAB_PREFIX
-#define FSTAB_PREFIX "/fstab."
-#endif
-#ifndef KEY_IN_FOOTER
-#define KEY_IN_FOOTER "footer"
-#endif
-
-struct fstab *fstab;
-
-static unsigned int get_blkdev_size(int fd)
-{
-  unsigned int nr_sec;
-
-  if ( (ioctl(fd, BLKGETSIZE, &nr_sec)) == -1) {
-    nr_sec = 0;
-  }
-
-  return nr_sec;
-}
-
-int get_crypt_ftr_info(char **metadata_fname, off64_t *off)
-{
-  static int cached_data = 0;
-  static off64_t cached_off = 0;
-  static char cached_metadata_fname[PROPERTY_VALUE_MAX] = "";
-  int fd;
-  char key_loc[PROPERTY_VALUE_MAX];
-  char real_blkdev[PROPERTY_VALUE_MAX];
-  unsigned int nr_sec;
-  int rc = -1;
-
-    fs_mgr_get_crypt_info(fstab, key_loc, real_blkdev, sizeof(key_loc));
-
-    if (!strcmp(key_loc, KEY_IN_FOOTER)) {
-      if ( (fd = open(real_blkdev, O_RDWR)) < 0) {
-        printf("Cannot open real block device %s\n", real_blkdev);
-        return -1;
-      }
-
-      if ((nr_sec = get_blkdev_size(fd))) {
-        /* If it's an encrypted Android partition, the last 16 Kbytes contain the
-         * encryption info footer and key, and plenty of bytes to spare for future
-         * growth.
-         */
-        strlcpy(cached_metadata_fname, real_blkdev, sizeof(cached_metadata_fname));
-        cached_off = ((off64_t)nr_sec * 512) - CRYPT_FOOTER_OFFSET;
-        cached_data = 1;
-      } else {
-        printf("Cannot get size of block device %s\n", real_blkdev);
-      }
-      close(fd);
-    } else {
-      strlcpy(cached_metadata_fname, key_loc, sizeof(cached_metadata_fname));
-      cached_off = 0;
-      cached_data = 1;
-    }
-
-  if (cached_data) {
-    if (metadata_fname) {
-        *metadata_fname = cached_metadata_fname;
-    }
-    if (off) {
-        *off = cached_off;
-    }
-    rc = 0;
-  }
-
-  return rc;
-}
-
-int get_crypt_ftr_and_key(struct crypt_mnt_ftr *crypt_ftr)
-{
-  int fd;
-  unsigned int nr_sec, cnt;
-  off64_t starting_off;
-  int rc = -1;
-  char *fname = NULL;
-  struct stat statbuf;
-
-  if (get_crypt_ftr_info(&fname, &starting_off)) {
-    printf("Unable to get crypt_ftr_info\n");
-    return -1;
-  }
-  if (fname[0] != '/') {
-    printf("Unexpected value for crypto key location '%s'\n", fname);
-    //return -1;
-  }
-  if ( (fd = open(fname, O_RDWR)) < 0) {
-    printf("Cannot open footer file %s for get\n", fname);
-    return -1;
-  }
-
-  /* Make sure it's 16 Kbytes in length */
-  fstat(fd, &statbuf);
-  if (S_ISREG(statbuf.st_mode) && (statbuf.st_size != 0x4000)) {
-    printf("footer file %s is not the expected size!\n", fname);
-	close(fd);
-    return -1;
-  }
-
-  /* Seek to the start of the crypt footer */
-  if (lseek64(fd, starting_off, SEEK_SET) == -1) {
-    printf("Cannot seek to real block device footer\n");
-	close(fd);
-    return -1;
-  }
-
-  if ( (cnt = read(fd, crypt_ftr, sizeof(struct crypt_mnt_ftr))) != sizeof(struct crypt_mnt_ftr)) {
-    printf("Cannot read real block device footer\n");
-	close(fd);
-    return -1;
-  }
-  close(fd);
-  return 0;
-}
-
-int main(void)
-{
-	char key_loc[PROPERTY_VALUE_MAX];
-	char blk_dev[PROPERTY_VALUE_MAX];
-	char fstab_filename[PROPERTY_VALUE_MAX + sizeof(FSTAB_PREFIX)];
-	struct stat st;
-	struct crypt_mnt_ftr crypt_ftr;
-	int fdout;
-
-	printf("This tool comes with no warranties whatsoever.\n");
-	printf("http://teamw.in\n\n");
-	strcpy(fstab_filename, FSTAB_PREFIX);
-	property_get("ro.hardware", fstab_filename + sizeof(FSTAB_PREFIX) - 1, "");
-
-	if (stat(fstab_filename, &st) != 0) {
-		printf("Cannot locate fstab file '%s'\n", fstab_filename);
-		return -1;
-	}
-
-	fstab = fs_mgr_read_fstab(fstab_filename);
-	if (!fstab) {
-		printf("failed to open %s\n", fstab_filename);
-		return -1;
-	}
-
-	fs_mgr_get_crypt_info(fstab, key_loc, blk_dev, sizeof(blk_dev));
-
-	if (get_crypt_ftr_and_key(&crypt_ftr)) {
-		printf("Error getting crypt footer and key\n");
-		return -1;
-	}
-
-	if ( (fdout = open("/footerfile", O_WRONLY | O_CREAT, 0644)) < 0) {
-		printf("Cannot open output file /footerfile\n");
-		return -1;
-	}
-	if (write(fdout, (void*) &crypt_ftr, sizeof(struct crypt_mnt_ftr)) != sizeof(struct crypt_mnt_ftr)) {
-		printf("Failed to write footer.\n");
-	}
-	close(fdout);
-
-	if (!strcmp(key_loc, KEY_IN_FOOTER)) {
-		unsigned int nr_sec, cnt;
-		off64_t off = 0;
-		char buffer[CRYPT_FOOTER_OFFSET];
-		int fd;
-
-		printf("\n\nDumping footer from '%s'...\n", blk_dev);
-		if ( (fd = open(blk_dev, O_RDONLY)) < 0) {
-			printf("Cannot open real block device %s\n", blk_dev);
-			return -1;
-		}
-
-		if ((nr_sec = get_blkdev_size(fd))) {
-			off = ((off64_t)nr_sec * 512) - CRYPT_FOOTER_OFFSET;
-		} else {
-			printf("Cannot get size of block device %s\n", blk_dev);
-			close(fd);
-			return -1;
-		}
-		printf("Size is %llu, offset is %llu\n", ((off64_t)nr_sec * 512), off);
-		if (lseek64(fd, off, SEEK_SET) == -1) {
-			printf("Cannot seek to real block device footer\n");
-			close(fd);
-			return -1;
-		}
-
-		if ( (cnt = read(fd, buffer, sizeof(buffer))) != sizeof(buffer)) {
-			printf("Cannot read real block device footer\n");
-			close(fd);
-			return -1;
-		}
-		close(fd);
-		if ( (fdout = open("/footerdump", O_WRONLY | O_CREAT, 0644)) < 0) {
-			printf("Cannot open output file /footerdump\n");
-			return -1;
-		}
-		if (write(fdout, buffer, sizeof(buffer)) != sizeof(buffer)) {
-			printf("Failed to write footer.\n");
-		}
-		close(fdout);
-	}
-
-	return 0;
-}
diff --git a/crypto/fs_mgr/Android.mk b/crypto/fs_mgr/Android.mk
deleted file mode 100644
index 8dd9d4ca2..000000000
--- a/crypto/fs_mgr/Android.mk
+++ /dev/null
@@ -1,38 +0,0 @@
-# Copyright 2011 The Android Open Source Project
-ifeq ($(TW_INCLUDE_JB_CRYPTO), true)
-LOCAL_PATH:= $(call my-dir)
-include $(CLEAR_VARS)
-
-LOCAL_SRC_FILES:= fs_mgr.c fs_mgr_verity.c
-
-LOCAL_C_INCLUDES := $(LOCAL_PATH)/include
-
-LOCAL_MODULE:= libfs_mgrtwrp
-LOCAL_SHARED_LIBRARIES := libext4_utils
-LOCAL_STATIC_LIBRARIES := liblogwraptwrp libmincrypttwrp
-LOCAL_C_INCLUDES += \
-    system/extras/ext4_utils \
-    $(commands_recovery_local_path)/libmincrypt/includes
-LOCAL_EXPORT_C_INCLUDE_DIRS := $(LOCAL_PATH)/include
-
-include $(BUILD_STATIC_LIBRARY)
-
-
-include $(CLEAR_VARS)
-
-LOCAL_SRC_FILES:= fs_mgr_main.c
-
-LOCAL_C_INCLUDES := $(LOCAL_PATH)/include
-
-LOCAL_MODULE:= fs_mgrtwrp
-
-LOCAL_MODULE_TAGS := optional
-LOCAL_FORCE_STATIC_EXECUTABLE := true
-LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)/sbin
-LOCAL_UNSTRIPPED_PATH := $(TARGET_ROOT_OUT_UNSTRIPPED)
-
-LOCAL_STATIC_LIBRARIES := libfs_mgrtwrp liblogwraptwrp libcutils liblog libc libmincrypttwrp libext4_utils_static
-
-include $(BUILD_EXECUTABLE)
-
-endif
diff --git a/crypto/fs_mgr/fs_mgr.c b/crypto/fs_mgr/fs_mgr.c
deleted file mode 100644
index 3aa9e6039..000000000
--- a/crypto/fs_mgr/fs_mgr.c
+++ /dev/null
@@ -1,948 +0,0 @@
-/*
- * Copyright (C) 2012 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <ctype.h>
-#include <sys/mount.h>
-#include <sys/stat.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <libgen.h>
-#include <time.h>
-//#include <sys/swap.h>
-/* XXX These need to be obtained from kernel headers. See b/9336527 */
-#define SWAP_FLAG_PREFER        0x8000
-#define SWAP_FLAG_PRIO_MASK     0x7fff
-#define SWAP_FLAG_PRIO_SHIFT    0
-#define SWAP_FLAG_DISCARD       0x10000
-
-#include <linux/loop.h>
-#include <private/android_filesystem_config.h>
-#include <cutils/partition_utils.h>
-#include <cutils/properties.h>
-#include <logwrap/logwrap.h>
-
-#include "mincrypt/rsa.h"
-#include "mincrypt/sha.h"
-#include "mincrypt/sha256.h"
-
-#include "fs_mgr_priv.h"
-#include "fs_mgr_priv_verity.h"
-
-#define KEY_LOC_PROP   "ro.crypto.keyfile.userdata"
-#define KEY_IN_FOOTER  "footer"
-
-#define E2FSCK_BIN      "/system/bin/e2fsck"
-#define MKSWAP_BIN      "/system/bin/mkswap"
-
-#define FSCK_LOG_FILE   "/dev/fscklogs/log"
-
-#define ZRAM_CONF_DEV   "/sys/block/zram0/disksize"
-
-#define ARRAY_SIZE(a) (sizeof(a) / sizeof(*(a)))
-
-struct flag_list {
-    const char *name;
-    unsigned flag;
-};
-
-static struct flag_list mount_flags[] = {
-    { "noatime",    MS_NOATIME },
-    { "noexec",     MS_NOEXEC },
-    { "nosuid",     MS_NOSUID },
-    { "nodev",      MS_NODEV },
-    { "nodiratime", MS_NODIRATIME },
-    { "ro",         MS_RDONLY },
-    { "rw",         0 },
-    { "remount",    MS_REMOUNT },
-    { "bind",       MS_BIND },
-    { "rec",        MS_REC },
-    { "unbindable", MS_UNBINDABLE },
-    { "private",    MS_PRIVATE },
-    { "slave",      MS_SLAVE },
-    { "shared",     MS_SHARED },
-    { "defaults",   0 },
-    { 0,            0 },
-};
-
-static struct flag_list fs_mgr_flags[] = {
-    { "wait",        MF_WAIT },
-    { "check",       MF_CHECK },
-    { "encryptable=",MF_CRYPT },
-    { "nonremovable",MF_NONREMOVABLE },
-    { "voldmanaged=",MF_VOLDMANAGED},
-    { "length=",     MF_LENGTH },
-    { "recoveryonly",MF_RECOVERYONLY },
-    { "swapprio=",   MF_SWAPPRIO },
-    { "zramsize=",   MF_ZRAMSIZE },
-    { "verify",      MF_VERIFY },
-    { "noemulatedsd", MF_NOEMULATEDSD },
-    { "defaults",    0 },
-    { 0,             0 },
-};
-
-struct fs_mgr_flag_values {
-    char *key_loc;
-    long long part_length;
-    char *label;
-    int partnum;
-    int swap_prio;
-    unsigned int zram_size;
-};
-
-/*
- * gettime() - returns the time in seconds of the system's monotonic clock or
- * zero on error.
- */
-static time_t gettime(void)
-{
-    struct timespec ts;
-    int ret;
-
-    ret = clock_gettime(CLOCK_MONOTONIC, &ts);
-    if (ret < 0) {
-        ERROR("clock_gettime(CLOCK_MONOTONIC) failed: %s\n", strerror(errno));
-        return 0;
-    }
-
-    return ts.tv_sec;
-}
-
-static int wait_for_file(const char *filename, int timeout)
-{
-    struct stat info;
-    time_t timeout_time = gettime() + timeout;
-    int ret = -1;
-
-    while (gettime() < timeout_time && ((ret = stat(filename, &info)) < 0))
-        usleep(10000);
-
-    return ret;
-}
-
-static int parse_flags(char *flags, struct flag_list *fl,
-                       struct fs_mgr_flag_values *flag_vals,
-                       char *fs_options, int fs_options_len)
-{
-    int f = 0;
-    int i;
-    char *p;
-    char *savep;
-
-    /* initialize flag values.  If we find a relevant flag, we'll
-     * update the value */
-    if (flag_vals) {
-        memset(flag_vals, 0, sizeof(*flag_vals));
-        flag_vals->partnum = -1;
-        flag_vals->swap_prio = -1; /* negative means it wasn't specified. */
-    }
-
-    /* initialize fs_options to the null string */
-    if (fs_options && (fs_options_len > 0)) {
-        fs_options[0] = '\0';
-    }
-
-    p = strtok_r(flags, ",", &savep);
-    while (p) {
-        /* Look for the flag "p" in the flag list "fl"
-         * If not found, the loop exits with fl[i].name being null.
-         */
-        for (i = 0; fl[i].name; i++) {
-            if (!strncmp(p, fl[i].name, strlen(fl[i].name))) {
-                f |= fl[i].flag;
-                if ((fl[i].flag == MF_CRYPT) && flag_vals) {
-                    /* The encryptable flag is followed by an = and the
-                     * location of the keys.  Get it and return it.
-                     */
-                    flag_vals->key_loc = strdup(strchr(p, '=') + 1);
-                } else if ((fl[i].flag == MF_LENGTH) && flag_vals) {
-                    /* The length flag is followed by an = and the
-                     * size of the partition.  Get it and return it.
-                     */
-                    flag_vals->part_length = strtoll(strchr(p, '=') + 1, NULL, 0);
-                } else if ((fl[i].flag == MF_VOLDMANAGED) && flag_vals) {
-                    /* The voldmanaged flag is followed by an = and the
-                     * label, a colon and the partition number or the
-                     * word "auto", e.g.
-                     *   voldmanaged=sdcard:3
-                     * Get and return them.
-                     */
-                    char *label_start;
-                    char *label_end;
-                    char *part_start;
-
-                    label_start = strchr(p, '=') + 1;
-                    label_end = strchr(p, ':');
-                    if (label_end) {
-                        flag_vals->label = strndup(label_start,
-                                                   (int) (label_end - label_start));
-                        part_start = strchr(p, ':') + 1;
-                        if (!strcmp(part_start, "auto")) {
-                            flag_vals->partnum = -1;
-                        } else {
-                            flag_vals->partnum = strtol(part_start, NULL, 0);
-                        }
-                    } else {
-                        ERROR("Warning: voldmanaged= flag malformed\n");
-                    }
-                } else if ((fl[i].flag == MF_SWAPPRIO) && flag_vals) {
-                    flag_vals->swap_prio = strtoll(strchr(p, '=') + 1, NULL, 0);
-                } else if ((fl[i].flag == MF_ZRAMSIZE) && flag_vals) {
-                    flag_vals->zram_size = strtoll(strchr(p, '=') + 1, NULL, 0);
-                }
-                break;
-            }
-        }
-
-        if (!fl[i].name) {
-            if (fs_options) {
-                /* It's not a known flag, so it must be a filesystem specific
-                 * option.  Add it to fs_options if it was passed in.
-                 */
-                strlcat(fs_options, p, fs_options_len);
-                strlcat(fs_options, ",", fs_options_len);
-            } else {
-                /* fs_options was not passed in, so if the flag is unknown
-                 * it's an error.
-                 */
-                ERROR("Warning: unknown flag %s\n", p);
-            }
-        }
-        p = strtok_r(NULL, ",", &savep);
-    }
-
-out:
-    if (fs_options && fs_options[0]) {
-        /* remove the last trailing comma from the list of options */
-        fs_options[strlen(fs_options) - 1] = '\0';
-    }
-
-    return f;
-}
-
-/* Read a line of text till the next newline character.
- * If no newline is found before the buffer is full, continue reading till a new line is seen,
- * then return an empty buffer.  This effectively ignores lines that are too long.
- * On EOF, return null.
- */
-static char *fs_getline(char *buf, int size, FILE *file)
-{
-    int cnt = 0;
-    int eof = 0;
-    int eol = 0;
-    int c;
-
-    if (size < 1) {
-        return NULL;
-    }
-
-    while (cnt < (size - 1)) {
-        c = getc(file);
-        if (c == EOF) {
-            eof = 1;
-            break;
-        }
-
-        *(buf + cnt) = c;
-        cnt++;
-
-        if (c == '\n') {
-            eol = 1;
-            break;
-        }
-    }
-
-    /* Null terminate what we've read */
-    *(buf + cnt) = '\0';
-
-    if (eof) {
-        if (cnt) {
-            return buf;
-        } else {
-            return NULL;
-        }
-    } else if (eol) {
-        return buf;
-    } else {
-        /* The line is too long.  Read till a newline or EOF.
-         * If EOF, return null, if newline, return an empty buffer.
-         */
-        while(1) {
-            c = getc(file);
-            if (c == EOF) {
-                return NULL;
-            } else if (c == '\n') {
-                *buf = '\0';
-                return buf;
-            }
-        }
-    }
-}
-
-struct fstab *fs_mgr_read_fstab(const char *fstab_path)
-{
-    FILE *fstab_file;
-    int cnt, entries;
-    int len;
-    char line[256];
-    const char *delim = " \t";
-    char *save_ptr, *p;
-    struct fstab *fstab;
-    struct fstab_rec *recs;
-    struct fs_mgr_flag_values flag_vals;
-#define FS_OPTIONS_LEN 1024
-    char tmp_fs_options[FS_OPTIONS_LEN];
-
-    fstab_file = fopen(fstab_path, "r");
-    if (!fstab_file) {
-        ERROR("Cannot open file %s\n", fstab_path);
-        return 0;
-    }
-
-    entries = 0;
-    while (fs_getline(line, sizeof(line), fstab_file)) {
-        /* if the last character is a newline, shorten the string by 1 byte */
-        len = strlen(line);
-        if (line[len - 1] == '\n') {
-            line[len - 1] = '\0';
-        }
-        /* Skip any leading whitespace */
-        p = line;
-        while (isspace(*p)) {
-            p++;
-        }
-        /* ignore comments or empty lines */
-        if (*p == '#' || *p == '\0')
-            continue;
-        entries++;
-    }
-
-    if (!entries) {
-        ERROR("No entries found in fstab\n");
-        return 0;
-    }
-
-    /* Allocate and init the fstab structure */
-    fstab = calloc(1, sizeof(struct fstab));
-    fstab->num_entries = entries;
-    fstab->fstab_filename = strdup(fstab_path);
-    fstab->recs = calloc(fstab->num_entries, sizeof(struct fstab_rec));
-
-    fseek(fstab_file, 0, SEEK_SET);
-
-    cnt = 0;
-    while (fs_getline(line, sizeof(line), fstab_file)) {
-        /* if the last character is a newline, shorten the string by 1 byte */
-        len = strlen(line);
-        if (line[len - 1] == '\n') {
-            line[len - 1] = '\0';
-        }
-
-        /* Skip any leading whitespace */
-        p = line;
-        while (isspace(*p)) {
-            p++;
-        }
-        /* ignore comments or empty lines */
-        if (*p == '#' || *p == '\0')
-            continue;
-
-        /* If a non-comment entry is greater than the size we allocated, give an
-         * error and quit.  This can happen in the unlikely case the file changes
-         * between the two reads.
-         */
-        if (cnt >= entries) {
-            ERROR("Tried to process more entries than counted\n");
-            break;
-        }
-
-        if (!(p = strtok_r(line, delim, &save_ptr))) {
-            ERROR("Error parsing mount source\n");
-            return 0;
-        }
-        fstab->recs[cnt].blk_device = strdup(p);
-
-        if (!(p = strtok_r(NULL, delim, &save_ptr))) {
-            ERROR("Error parsing mount_point\n");
-            return 0;
-        }
-        fstab->recs[cnt].mount_point = strdup(p);
-
-        if (!(p = strtok_r(NULL, delim, &save_ptr))) {
-            ERROR("Error parsing fs_type\n");
-            return 0;
-        }
-        fstab->recs[cnt].fs_type = strdup(p);
-
-        if (!(p = strtok_r(NULL, delim, &save_ptr))) {
-            ERROR("Error parsing mount_flags\n");
-            return 0;
-        }
-        tmp_fs_options[0] = '\0';
-        fstab->recs[cnt].flags = parse_flags(p, mount_flags, NULL,
-                                       tmp_fs_options, FS_OPTIONS_LEN);
-
-        /* fs_options are optional */
-        if (tmp_fs_options[0]) {
-            fstab->recs[cnt].fs_options = strdup(tmp_fs_options);
-        } else {
-            fstab->recs[cnt].fs_options = NULL;
-        }
-
-        if (!(p = strtok_r(NULL, delim, &save_ptr))) {
-            ERROR("Error parsing fs_mgr_options\n");
-            return 0;
-        }
-        fstab->recs[cnt].fs_mgr_flags = parse_flags(p, fs_mgr_flags,
-                                                    &flag_vals, NULL, 0);
-        fstab->recs[cnt].key_loc = flag_vals.key_loc;
-        fstab->recs[cnt].length = flag_vals.part_length;
-        fstab->recs[cnt].label = flag_vals.label;
-        fstab->recs[cnt].partnum = flag_vals.partnum;
-        fstab->recs[cnt].swap_prio = flag_vals.swap_prio;
-        fstab->recs[cnt].zram_size = flag_vals.zram_size;
-        cnt++;
-    }
-    fclose(fstab_file);
-
-    return fstab;
-}
-
-void fs_mgr_free_fstab(struct fstab *fstab)
-{
-    int i;
-
-    if (!fstab) {
-        return;
-    }
-
-    for (i = 0; i < fstab->num_entries; i++) {
-        /* Free the pointers return by strdup(3) */
-        free(fstab->recs[i].blk_device);
-        free(fstab->recs[i].mount_point);
-        free(fstab->recs[i].fs_type);
-        free(fstab->recs[i].fs_options);
-        free(fstab->recs[i].key_loc);
-        free(fstab->recs[i].label);
-        i++;
-    }
-
-    /* Free the fstab_recs array created by calloc(3) */
-    free(fstab->recs);
-
-    /* Free the fstab filename */
-    free(fstab->fstab_filename);
-
-    /* Free fstab */
-    free(fstab);
-}
-
-static void check_fs(char *blk_device, char *fs_type, char *target)
-{
-    int status;
-    int ret;
-    long tmpmnt_flags = MS_NOATIME | MS_NOEXEC | MS_NOSUID;
-    char *tmpmnt_opts = "nomblk_io_submit,errors=remount-ro";
-    char *e2fsck_argv[] = {
-        E2FSCK_BIN,
-        "-y",
-        blk_device
-    };
-
-    /* Check for the types of filesystems we know how to check */
-    if (!strcmp(fs_type, "ext2") || !strcmp(fs_type, "ext3") || !strcmp(fs_type, "ext4")) {
-        /*
-         * First try to mount and unmount the filesystem.  We do this because
-         * the kernel is more efficient than e2fsck in running the journal and
-         * processing orphaned inodes, and on at least one device with a
-         * performance issue in the emmc firmware, it can take e2fsck 2.5 minutes
-         * to do what the kernel does in about a second.
-         *
-         * After mounting and unmounting the filesystem, run e2fsck, and if an
-         * error is recorded in the filesystem superblock, e2fsck will do a full
-         * check.  Otherwise, it does nothing.  If the kernel cannot mount the
-         * filesytsem due to an error, e2fsck is still run to do a full check
-         * fix the filesystem.
-         */
-        ret = mount(blk_device, target, fs_type, tmpmnt_flags, tmpmnt_opts);
-        if (!ret) {
-            umount(target);
-        }
-
-        INFO("Running %s on %s\n", E2FSCK_BIN, blk_device);
-
-        ret = android_fork_execvp_ext(ARRAY_SIZE(e2fsck_argv), e2fsck_argv,
-                                      &status, true, LOG_KLOG | LOG_FILE,
-                                      true, FSCK_LOG_FILE);
-
-        if (ret < 0) {
-            /* No need to check for error in fork, we can't really handle it now */
-            ERROR("Failed trying to run %s\n", E2FSCK_BIN);
-        }
-    }
-
-    return;
-}
-
-static void remove_trailing_slashes(char *n)
-{
-    int len;
-
-    len = strlen(n) - 1;
-    while ((*(n + len) == '/') && len) {
-      *(n + len) = '\0';
-      len--;
-    }
-}
-
-/*
- * Mark the given block device as read-only, using the BLKROSET ioctl.
- * Return 0 on success, and -1 on error.
- */
-static void fs_set_blk_ro(const char *blockdev)
-{
-    int fd;
-    int ON = 1;
-
-    fd = open(blockdev, O_RDONLY);
-    if (fd < 0) {
-        // should never happen
-        return;
-    }
-
-    ioctl(fd, BLKROSET, &ON);
-    close(fd);
-}
-
-/*
- * __mount(): wrapper around the mount() system call which also
- * sets the underlying block device to read-only if the mount is read-only.
- * See "man 2 mount" for return values.
- */
-static int __mount(const char *source, const char *target,
-                   const char *filesystemtype, unsigned long mountflags,
-                   const void *data)
-{
-    int ret = mount(source, target, filesystemtype, mountflags, data);
-
-    if ((ret == 0) && (mountflags & MS_RDONLY) != 0) {
-        fs_set_blk_ro(source);
-    }
-
-    return ret;
-}
-
-static int fs_match(char *in1, char *in2)
-{
-    char *n1;
-    char *n2;
-    int ret;
-
-    n1 = strdup(in1);
-    n2 = strdup(in2);
-
-    remove_trailing_slashes(n1);
-    remove_trailing_slashes(n2);
-
-    ret = !strcmp(n1, n2);
-
-    free(n1);
-    free(n2);
-
-    return ret;
-}
-
-int fs_mgr_mount_all(struct fstab *fstab)
-{
-    int i = 0;
-    int encrypted = 0;
-    int ret = -1;
-    int mret;
-
-    if (!fstab) {
-        return ret;
-    }
-
-    for (i = 0; i < fstab->num_entries; i++) {
-        /* Don't mount entries that are managed by vold */
-        if (fstab->recs[i].fs_mgr_flags & (MF_VOLDMANAGED | MF_RECOVERYONLY)) {
-            continue;
-        }
-
-        /* Skip swap and raw partition entries such as boot, recovery, etc */
-        if (!strcmp(fstab->recs[i].fs_type, "swap") ||
-            !strcmp(fstab->recs[i].fs_type, "emmc") ||
-            !strcmp(fstab->recs[i].fs_type, "mtd")) {
-            continue;
-        }
-
-        if (fstab->recs[i].fs_mgr_flags & MF_WAIT) {
-            wait_for_file(fstab->recs[i].blk_device, WAIT_TIMEOUT);
-        }
-
-        if (fstab->recs[i].fs_mgr_flags & MF_CHECK) {
-            check_fs(fstab->recs[i].blk_device, fstab->recs[i].fs_type,
-                     fstab->recs[i].mount_point);
-        }
-
-        if (fstab->recs[i].fs_mgr_flags & MF_VERIFY) {
-            if (fs_mgr_setup_verity(&fstab->recs[i]) < 0) {
-                ERROR("Could not set up verified partition, skipping!");
-                continue;
-            }
-        }
-
-        mret = __mount(fstab->recs[i].blk_device, fstab->recs[i].mount_point,
-                     fstab->recs[i].fs_type, fstab->recs[i].flags,
-                     fstab->recs[i].fs_options);
-
-        if (!mret) {
-            /* Success!  Go get the next one */
-            continue;
-        }
-
-        /* mount(2) returned an error, check if it's encrypted and deal with it */
-        if ((fstab->recs[i].fs_mgr_flags & MF_CRYPT) &&
-            !partition_wiped(fstab->recs[i].blk_device)) {
-            /* Need to mount a tmpfs at this mountpoint for now, and set
-             * properties that vold will query later for decrypting
-             */
-            if (mount("tmpfs", fstab->recs[i].mount_point, "tmpfs",
-                  MS_NOATIME | MS_NOSUID | MS_NODEV, CRYPTO_TMPFS_OPTIONS) < 0) {
-                ERROR("Cannot mount tmpfs filesystem for encrypted fs at %s\n",
-                        fstab->recs[i].mount_point);
-                goto out;
-            }
-            encrypted = 1;
-        } else {
-            ERROR("Cannot mount filesystem on %s at %s\n",
-                    fstab->recs[i].blk_device, fstab->recs[i].mount_point);
-            goto out;
-        }
-    }
-
-    if (encrypted) {
-        ret = 1;
-    } else {
-        ret = 0;
-    }
-
-out:
-    return ret;
-}
-
-/* If tmp_mount_point is non-null, mount the filesystem there.  This is for the
- * tmp mount we do to check the user password
- */
-int fs_mgr_do_mount(struct fstab *fstab, char *n_name, char *n_blk_device,
-                    char *tmp_mount_point)
-{
-    int i = 0;
-    int ret = -1;
-    char *m;
-
-    if (!fstab) {
-        return ret;
-    }
-
-    for (i = 0; i < fstab->num_entries; i++) {
-        if (!fs_match(fstab->recs[i].mount_point, n_name)) {
-            continue;
-        }
-
-        /* We found our match */
-        /* If this swap or a raw partition, report an error */
-        if (!strcmp(fstab->recs[i].fs_type, "swap") ||
-            !strcmp(fstab->recs[i].fs_type, "emmc") ||
-            !strcmp(fstab->recs[i].fs_type, "mtd")) {
-            ERROR("Cannot mount filesystem of type %s on %s\n",
-                  fstab->recs[i].fs_type, n_blk_device);
-            goto out;
-        }
-
-        /* First check the filesystem if requested */
-        if (fstab->recs[i].fs_mgr_flags & MF_WAIT) {
-            wait_for_file(n_blk_device, WAIT_TIMEOUT);
-        }
-
-        if (fstab->recs[i].fs_mgr_flags & MF_CHECK) {
-            check_fs(n_blk_device, fstab->recs[i].fs_type,
-                     fstab->recs[i].mount_point);
-        }
-
-        if (fstab->recs[i].fs_mgr_flags & MF_VERIFY) {
-            if (fs_mgr_setup_verity(&fstab->recs[i]) < 0) {
-                ERROR("Could not set up verified partition, skipping!");
-                continue;
-            }
-        }
-
-        /* Now mount it where requested */
-        if (tmp_mount_point) {
-            m = tmp_mount_point;
-        } else {
-            m = fstab->recs[i].mount_point;
-        }
-        if (__mount(n_blk_device, m, fstab->recs[i].fs_type,
-                    fstab->recs[i].flags, fstab->recs[i].fs_options)) {
-            ERROR("Cannot mount filesystem on %s at %s\n",
-                    n_blk_device, m);
-            goto out;
-        } else {
-            ret = 0;
-            goto out;
-        }
-    }
-
-    /* We didn't find a match, say so and return an error */
-    ERROR("Cannot find mount point %s in fstab\n", fstab->recs[i].mount_point);
-
-out:
-    return ret;
-}
-
-/*
- * mount a tmpfs filesystem at the given point.
- * return 0 on success, non-zero on failure.
- */
-int fs_mgr_do_tmpfs_mount(char *n_name)
-{
-    int ret;
-
-    ret = mount("tmpfs", n_name, "tmpfs",
-                MS_NOATIME | MS_NOSUID | MS_NODEV, CRYPTO_TMPFS_OPTIONS);
-    if (ret < 0) {
-        ERROR("Cannot mount tmpfs filesystem at %s\n", n_name);
-        return -1;
-    }
-
-    /* Success */
-    return 0;
-}
-
-int fs_mgr_unmount_all(struct fstab *fstab)
-{
-    int i = 0;
-    int ret = 0;
-
-    if (!fstab) {
-        return -1;
-    }
-
-    while (fstab->recs[i].blk_device) {
-        if (umount(fstab->recs[i].mount_point)) {
-            ERROR("Cannot unmount filesystem at %s\n", fstab->recs[i].mount_point);
-            ret = -1;
-        }
-        i++;
-    }
-
-    return ret;
-}
-
-/* This must be called after mount_all, because the mkswap command needs to be
- * available.
- */
-int fs_mgr_swapon_all(struct fstab *fstab)
-{
-    int i = 0;
-    int flags = 0;
-    int err = 0;
-    int ret = 0;
-    int status;
-    char *mkswap_argv[2] = {
-        MKSWAP_BIN,
-        NULL
-    };
-
-    if (!fstab) {
-        return -1;
-    }
-
-    for (i = 0; i < fstab->num_entries; i++) {
-        /* Skip non-swap entries */
-        if (strcmp(fstab->recs[i].fs_type, "swap")) {
-            continue;
-        }
-
-        if (fstab->recs[i].zram_size > 0) {
-            /* A zram_size was specified, so we need to configure the
-             * device.  There is no point in having multiple zram devices
-             * on a system (all the memory comes from the same pool) so
-             * we can assume the device number is 0.
-             */
-            FILE *zram_fp;
-
-            zram_fp = fopen(ZRAM_CONF_DEV, "r+");
-            if (zram_fp == NULL) {
-                ERROR("Unable to open zram conf device " ZRAM_CONF_DEV);
-                ret = -1;
-                continue;
-            }
-            fprintf(zram_fp, "%d\n", fstab->recs[i].zram_size);
-            fclose(zram_fp);
-        }
-
-        if (fstab->recs[i].fs_mgr_flags & MF_WAIT) {
-            wait_for_file(fstab->recs[i].blk_device, WAIT_TIMEOUT);
-        }
-
-        /* Initialize the swap area */
-        mkswap_argv[1] = fstab->recs[i].blk_device;
-        err = android_fork_execvp_ext(ARRAY_SIZE(mkswap_argv), mkswap_argv,
-                                      &status, true, LOG_KLOG, false, NULL);
-        if (err) {
-            ERROR("mkswap failed for %s\n", fstab->recs[i].blk_device);
-            ret = -1;
-            continue;
-        }
-
-        /* If -1, then no priority was specified in fstab, so don't set
-         * SWAP_FLAG_PREFER or encode the priority */
-        if (fstab->recs[i].swap_prio >= 0) {
-            flags = (fstab->recs[i].swap_prio << SWAP_FLAG_PRIO_SHIFT) &
-                    SWAP_FLAG_PRIO_MASK;
-            flags |= SWAP_FLAG_PREFER;
-        } else {
-            flags = 0;
-        }
-        // requires sys/swap.h which is not available in older trees
-        // this entire function does not appear to be used for decrypt
-        err = -1; //swapon(fstab->recs[i].blk_device, flags);
-        if (err) {
-            ERROR("swapon failed for %s\n", fstab->recs[i].blk_device);
-            ret = -1;
-        }
-    }
-
-    return ret;
-}
-
-/*
- * key_loc must be at least PROPERTY_VALUE_MAX bytes long
- *
- * real_blk_device must be at least PROPERTY_VALUE_MAX bytes long
- */
-int fs_mgr_get_crypt_info(struct fstab *fstab, char *key_loc, char *real_blk_device, int size)
-{
-    int i = 0;
-
-    if (!fstab) {
-        return -1;
-    }
-    /* Initialize return values to null strings */
-    if (key_loc) {
-        *key_loc = '\0';
-    }
-    if (real_blk_device) {
-        *real_blk_device = '\0';
-    }
-
-    /* Look for the encryptable partition to find the data */
-    for (i = 0; i < fstab->num_entries; i++) {
-        /* Don't deal with vold managed enryptable partitions here */
-        if (fstab->recs[i].fs_mgr_flags & MF_VOLDMANAGED) {
-            continue;
-        }
-        if (!(fstab->recs[i].fs_mgr_flags & MF_CRYPT)) {
-            continue;
-        }
-
-        /* We found a match */
-        if (key_loc) {
-            strlcpy(key_loc, fstab->recs[i].key_loc, size);
-        }
-        if (real_blk_device) {
-            strlcpy(real_blk_device, fstab->recs[i].blk_device, size);
-        }
-        break;
-    }
-
-    return 0;
-}
-
-/* Add an entry to the fstab, and return 0 on success or -1 on error */
-int fs_mgr_add_entry(struct fstab *fstab,
-                     const char *mount_point, const char *fs_type,
-                     const char *blk_device, long long length)
-{
-    struct fstab_rec *new_fstab_recs;
-    int n = fstab->num_entries;
-
-    new_fstab_recs = (struct fstab_rec *)
-                     realloc(fstab->recs, sizeof(struct fstab_rec) * (n + 1));
-
-    if (!new_fstab_recs) {
-        return -1;
-    }
-
-    /* A new entry was added, so initialize it */
-     memset(&new_fstab_recs[n], 0, sizeof(struct fstab_rec));
-     new_fstab_recs[n].mount_point = strdup(mount_point);
-     new_fstab_recs[n].fs_type = strdup(fs_type);
-     new_fstab_recs[n].blk_device = strdup(blk_device);
-     new_fstab_recs[n].length = 0;
-
-     /* Update the fstab struct */
-     fstab->recs = new_fstab_recs;
-     fstab->num_entries++;
-
-     return 0;
-}
-
-struct fstab_rec *fs_mgr_get_entry_for_mount_point(struct fstab *fstab, const char *path)
-{
-    int i;
-
-    if (!fstab) {
-        return NULL;
-    }
-
-    for (i = 0; i < fstab->num_entries; i++) {
-        int len = strlen(fstab->recs[i].mount_point);
-        if (strncmp(path, fstab->recs[i].mount_point, len) == 0 &&
-            (path[len] == '\0' || path[len] == '/')) {
-            return &fstab->recs[i];
-        }
-    }
-
-    return NULL;
-}
-
-int fs_mgr_is_voldmanaged(struct fstab_rec *fstab)
-{
-    return fstab->fs_mgr_flags & MF_VOLDMANAGED;
-}
-
-int fs_mgr_is_nonremovable(struct fstab_rec *fstab)
-{
-    return fstab->fs_mgr_flags & MF_NONREMOVABLE;
-}
-
-int fs_mgr_is_encryptable(struct fstab_rec *fstab)
-{
-    return fstab->fs_mgr_flags & MF_CRYPT;
-}
-
-int fs_mgr_is_noemulatedsd(struct fstab_rec *fstab)
-{
-    return fstab->fs_mgr_flags & MF_NOEMULATEDSD;
-}
diff --git a/crypto/fs_mgr/fs_mgr_main.c b/crypto/fs_mgr/fs_mgr_main.c
deleted file mode 100644
index 4bde4a1da..000000000
--- a/crypto/fs_mgr/fs_mgr_main.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright (C) 2012 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <libgen.h>
-#include "fs_mgr_priv.h"
-
-char *me = "";
-
-static void usage(void)
-{
-    ERROR("%s: usage: %s <-a | -n mnt_point blk_dev | -u> <fstab_file>\n", me, me);
-    exit(1);
-}
-
-/* Parse the command line.  If an error is encountered, print an error message
- * and exit the program, do not return to the caller.
- * Return the number of argv[] entries consumed.
- */
-static void parse_options(int argc, char *argv[], int *a_flag, int *u_flag, int *n_flag,
-                     char **n_name, char **n_blk_dev)
-{
-    me = basename(strdup(argv[0]));
-
-    if (argc <= 1) {
-        usage();
-    }
-
-    if (!strcmp(argv[1], "-a")) {
-        if (argc != 3) {
-            usage();
-        }
-        *a_flag = 1;
-    }
-    if (!strcmp(argv[1], "-n")) {
-        if (argc != 5) {
-            usage();
-        }
-        *n_flag = 1;
-        *n_name = argv[2];
-        *n_blk_dev = argv[3];
-    }
-    if (!strcmp(argv[1], "-u")) {
-        if (argc != 3) {
-            usage();
-        }
-        *u_flag = 1;
-    }
-
-    /* If no flag is specified, it's an error */
-    if (!(*a_flag | *n_flag | *u_flag)) {
-        usage();
-    }
-
-    /* If more than one flag is specified, it's an error */
-    if ((*a_flag + *n_flag + *u_flag) > 1) {
-        usage();
-    }
-
-    return;
-}
-
-int main(int argc, char *argv[])
-{
-    int a_flag=0;
-    int u_flag=0;
-    int n_flag=0;
-    char *n_name;
-    char *n_blk_dev;
-    char *fstab_file;
-    struct fstab *fstab;
-
-    klog_init();
-    klog_set_level(6);
-
-    parse_options(argc, argv, &a_flag, &u_flag, &n_flag, &n_name, &n_blk_dev);
-
-    /* The name of the fstab file is last, after the option */
-    fstab_file = argv[argc - 1];
-
-    fstab = fs_mgr_read_fstab(fstab_file);
-
-    if (a_flag) {
-        return fs_mgr_mount_all(fstab);
-    } else if (n_flag) {
-        return fs_mgr_do_mount(fstab, n_name, n_blk_dev, 0);
-    } else if (u_flag) {
-        return fs_mgr_unmount_all(fstab);
-    } else {
-        ERROR("%s: Internal error, unknown option\n", me);
-        exit(1);
-    }
-
-    fs_mgr_free_fstab(fstab);
-
-    /* Should not get here */
-    exit(1);
-}
-
diff --git a/crypto/fs_mgr/fs_mgr_priv.h b/crypto/fs_mgr/fs_mgr_priv.h
deleted file mode 100644
index 59ffd785c..000000000
--- a/crypto/fs_mgr/fs_mgr_priv.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright (C) 2012 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __CORE_FS_MGR_PRIV_H
-#define __CORE_FS_MGR_PRIV_H
-
-#include <cutils/klog.h>
-#include <fs_mgr.h>
-
-#define INFO(x...)    KLOG_INFO("fs_mgr", x)
-#define ERROR(x...)   KLOG_ERROR("fs_mgr", x)
-
-#define CRYPTO_TMPFS_OPTIONS "size=128m,mode=0771,uid=1000,gid=1000"
-
-#define WAIT_TIMEOUT 20
-
-/* fstab has the following format:
- *
- * Any line starting with a # is a comment and ignored
- *
- * Any blank line is ignored
- *
- * All other lines must be in this format:
- *   <source>  <mount_point> <fs_type> <mount_flags> <fs_options> <fs_mgr_options>
- *
- *   <mount_flags> is a comma separated list of flags that can be passed to the
- *                 mount command.  The list includes noatime, nosuid, nodev, nodiratime,
- *                 ro, rw, remount, defaults.
- *
- *   <fs_options> is a comma separated list of options accepted by the filesystem being
- *                mounted.  It is passed directly to mount without being parsed
- *
- *   <fs_mgr_options> is a comma separated list of flags that control the operation of
- *                     the fs_mgr program.  The list includes "wait", which will wait till
- *                     the <source> file exists, and "check", which requests that the fs_mgr 
- *                     run an fscheck program on the <source> before mounting the filesystem.
- *                     If check is specifed on a read-only filesystem, it is ignored.
- *                     Also, "encryptable" means that filesystem can be encrypted.
- *                     The "encryptable" flag _MUST_ be followed by a = and a string which
- *                     is the location of the encryption keys.  It can either be a path
- *                     to a file or partition which contains the keys, or the word "footer"
- *                     which means the keys are in the last 16 Kbytes of the partition
- *                     containing the filesystem.
- *
- * When the fs_mgr is requested to mount all filesystems, it will first mount all the
- * filesystems that do _NOT_ specify check (including filesystems that are read-only and
- * specify check, because check is ignored in that case) and then it will check and mount
- * filesystem marked with check.
- *
- */
-
-#define MF_WAIT         0x1
-#define MF_CHECK        0x2
-#define MF_CRYPT        0x4
-#define MF_NONREMOVABLE 0x8
-#define MF_VOLDMANAGED  0x10
-#define MF_LENGTH       0x20
-#define MF_RECOVERYONLY 0x40
-#define MF_SWAPPRIO     0x80
-#define MF_ZRAMSIZE     0x100
-#define MF_VERIFY       0x200
-/*
- * There is no emulated sdcard daemon running on /data/media on this device,
- * so treat the physical SD card as the only external storage device,
- * a la the Nexus One.
- */
-#define MF_NOEMULATEDSD 0x400
-
-#define DM_BUF_SIZE 4096
-
-#endif /* __CORE_FS_MGR_PRIV_H */
-
diff --git a/crypto/fs_mgr/fs_mgr_priv_verity.h b/crypto/fs_mgr/fs_mgr_priv_verity.h
deleted file mode 100644
index 61937849a..000000000
--- a/crypto/fs_mgr/fs_mgr_priv_verity.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2013 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-int fs_mgr_setup_verity(struct fstab_rec *fstab);
\ No newline at end of file
diff --git a/crypto/fs_mgr/fs_mgr_verity.c b/crypto/fs_mgr/fs_mgr_verity.c
deleted file mode 100644
index 969eab2a0..000000000
--- a/crypto/fs_mgr/fs_mgr_verity.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * Copyright (C) 2013 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <ctype.h>
-#include <sys/mount.h>
-#include <sys/stat.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <libgen.h>
-#include <time.h>
-
-#include <private/android_filesystem_config.h>
-#include <logwrap/logwrap.h>
-
-#include "mincrypt/rsa.h"
-#include "mincrypt/sha.h"
-#include "mincrypt/sha256.h"
-
-#include "ext4_utils.h"
-#include "ext4.h"
-
-#include "fs_mgr_priv.h"
-#include "fs_mgr_priv_verity.h"
-
-#define VERITY_METADATA_SIZE 32768
-#define VERITY_METADATA_MAGIC_NUMBER 0xb001b001
-#define VERITY_TABLE_RSA_KEY "/verity_key"
-
-extern struct fs_info info;
-
-static RSAPublicKey *load_key(char *path)
-{
-    FILE *f;
-    RSAPublicKey *key;
-
-    key = malloc(sizeof(RSAPublicKey));
-    if (!key) {
-        ERROR("Can't malloc key\n");
-        return NULL;
-    }
-
-    f = fopen(path, "r");
-    if (!f) {
-        ERROR("Can't open '%s'\n", path);
-        free(key);
-        return NULL;
-    }
-
-    if (!fread(key, sizeof(*key), 1, f)) {
-        ERROR("Could not read key!");
-        fclose(f);
-        free(key);
-        return NULL;
-    }
-
-    if (key->len != RSANUMWORDS) {
-        ERROR("Invalid key length %d\n", key->len);
-        fclose(f);
-        free(key);
-        return NULL;
-    }
-
-    fclose(f);
-    return key;
-}
-
-static int verify_table(char *signature, char *table, int table_length)
-{
-    int fd;
-    RSAPublicKey *key;
-    uint8_t hash_buf[SHA_DIGEST_SIZE];
-    int retval = -1;
-
-    // Hash the table
-    SHA_hash((uint8_t*)table, table_length, hash_buf);
-
-    // Now get the public key from the keyfile
-    key = load_key(VERITY_TABLE_RSA_KEY);
-    if (!key) {
-        ERROR("Couldn't load verity keys");
-        goto out;
-    }
-
-    // verify the result
-    if (!RSA_verify(key,
-                    (uint8_t*) signature,
-                    RSANUMBYTES,
-                    (uint8_t*) hash_buf,
-                    SHA_DIGEST_SIZE)) {
-        ERROR("Couldn't verify table.");
-        goto out;
-    }
-
-    retval = 0;
-
-out:
-    free(key);
-    return retval;
-}
-
-static int get_target_device_size(char *blk_device, uint64_t *device_size)
-{
-    int data_device;
-    struct ext4_super_block sb;
-
-    data_device = open(blk_device, O_RDONLY);
-    if (data_device < 0) {
-        ERROR("Error opening block device (%s)", strerror(errno));
-        return -1;
-    }
-
-    if (lseek64(data_device, 1024, SEEK_SET) < 0) {
-        ERROR("Error seeking to superblock");
-        close(data_device);
-        return -1;
-    }
-
-    if (read(data_device, &sb, sizeof(sb)) != sizeof(sb)) {
-        ERROR("Error reading superblock");
-        close(data_device);
-        return -1;
-    }
-
-    ext4_parse_sb(&sb);
-    *device_size = info.len;
-
-    close(data_device);
-    return 0;
-}
-
-static int read_verity_metadata(char *block_device, char **signature, char **table)
-{
-    unsigned magic_number;
-    unsigned table_length;
-    uint64_t device_length;
-    int protocol_version;
-    FILE *device;
-    int retval = -1;
-
-    device = fopen(block_device, "r");
-    if (!device) {
-        ERROR("Could not open block device %s (%s).\n", block_device, strerror(errno));
-        goto out;
-    }
-
-    // find the start of the verity metadata
-    if (get_target_device_size(block_device, &device_length) < 0) {
-        ERROR("Could not get target device size.\n");
-        goto out;
-    }
-    if (fseek(device, device_length, SEEK_SET) < 0) {
-        ERROR("Could not seek to start of verity metadata block.\n");
-        goto out;
-    }
-
-    // check the magic number
-    if (!fread(&magic_number, sizeof(int), 1, device)) {
-        ERROR("Couldn't read magic number!\n");
-        goto out;
-    }
-    if (magic_number != VERITY_METADATA_MAGIC_NUMBER) {
-        ERROR("Couldn't find verity metadata at offset %llu!\n", device_length);
-        goto out;
-    }
-
-    // check the protocol version
-    if (!fread(&protocol_version, sizeof(int), 1, device)) {
-        ERROR("Couldn't read verity metadata protocol version!\n");
-        goto out;
-    }
-    if (protocol_version != 0) {
-        ERROR("Got unknown verity metadata protocol version %d!\n", protocol_version);
-        goto out;
-    }
-
-    // get the signature
-    *signature = (char*) malloc(RSANUMBYTES * sizeof(char));
-    if (!*signature) {
-        ERROR("Couldn't allocate memory for signature!\n");
-        goto out;
-    }
-    if (!fread(*signature, RSANUMBYTES, 1, device)) {
-        ERROR("Couldn't read signature from verity metadata!\n");
-        free(*signature);
-        goto out;
-    }
-
-    // get the size of the table
-    if (!fread(&table_length, sizeof(int), 1, device)) {
-        ERROR("Couldn't get the size of the verity table from metadata!\n");
-        free(*signature);
-        goto out;
-    }
-
-    // get the table + null terminator
-    table_length += 1;
-    *table = malloc(table_length);
-    if(!*table) {
-        ERROR("Couldn't allocate memory for verity table!\n");
-        goto out;
-    }
-    if (!fgets(*table, table_length, device)) {
-        ERROR("Couldn't read the verity table from metadata!\n");
-        free(*table);
-        free(*signature);
-        goto out;
-    }
-
-    retval = 0;
-
-out:
-    if (device)
-        fclose(device);
-    return retval;
-}
-
-static void verity_ioctl_init(struct dm_ioctl *io, char *name, unsigned flags)
-{
-    memset(io, 0, DM_BUF_SIZE);
-    io->data_size = DM_BUF_SIZE;
-    io->data_start = sizeof(struct dm_ioctl);
-    io->version[0] = 4;
-    io->version[1] = 0;
-    io->version[2] = 0;
-    io->flags = flags | DM_READONLY_FLAG;
-    if (name) {
-        strlcpy(io->name, name, sizeof(io->name));
-    }
-}
-
-static int create_verity_device(struct dm_ioctl *io, char *name, int fd)
-{
-    verity_ioctl_init(io, name, 1);
-    if (ioctl(fd, DM_DEV_CREATE, io)) {
-        ERROR("Error creating device mapping (%s)", strerror(errno));
-        return -1;
-    }
-    return 0;
-}
-
-static int get_verity_device_name(struct dm_ioctl *io, char *name, int fd, char **dev_name)
-{
-    verity_ioctl_init(io, name, 0);
-    if (ioctl(fd, DM_DEV_STATUS, io)) {
-        ERROR("Error fetching verity device number (%s)", strerror(errno));
-        return -1;
-    }
-    int dev_num = (io->dev & 0xff) | ((io->dev >> 12) & 0xfff00);
-    if (asprintf(dev_name, "/dev/block/dm-%u", dev_num) < 0) {
-        ERROR("Error getting verity block device name (%s)", strerror(errno));
-        return -1;
-    }
-    return 0;
-}
-
-static int load_verity_table(struct dm_ioctl *io, char *name, char *blockdev, int fd, char *table)
-{
-    char *verity_params;
-    char *buffer = (char*) io;
-    uint64_t device_size = 0;
-
-    if (get_target_device_size(blockdev, &device_size) < 0) {
-        return -1;
-    }
-
-    verity_ioctl_init(io, name, DM_STATUS_TABLE_FLAG);
-
-    struct dm_target_spec *tgt = (struct dm_target_spec *) &buffer[sizeof(struct dm_ioctl)];
-
-    // set tgt arguments here
-    io->target_count = 1;
-    tgt->status=0;
-    tgt->sector_start=0;
-    tgt->length=device_size/512;
-    strcpy(tgt->target_type, "verity");
-
-    // build the verity params here
-    verity_params = buffer + sizeof(struct dm_ioctl) + sizeof(struct dm_target_spec);
-    if (sprintf(verity_params, "%s", table) < 0) {
-        return -1;
-    }
-
-    // set next target boundary
-    verity_params += strlen(verity_params) + 1;
-    verity_params = (char*) (((unsigned long)verity_params + 7) & ~8);
-    tgt->next = verity_params - buffer;
-
-    // send the ioctl to load the verity table
-    if (ioctl(fd, DM_TABLE_LOAD, io)) {
-        ERROR("Error loading verity table (%s)", strerror(errno));
-        return -1;
-    }
-
-    return 0;
-}
-
-static int resume_verity_table(struct dm_ioctl *io, char *name, int fd)
-{
-    verity_ioctl_init(io, name, 0);
-    if (ioctl(fd, DM_DEV_SUSPEND, io)) {
-        ERROR("Error activating verity device (%s)", strerror(errno));
-        return -1;
-    }
-    return 0;
-}
-
-static int test_access(char *device) {
-    int tries = 25;
-    while (tries--) {
-        if (!access(device, F_OK) || errno != ENOENT) {
-            return 0;
-        }
-        usleep(40 * 1000);
-    }
-    return -1;
-}
-
-int fs_mgr_setup_verity(struct fstab_rec *fstab) {
-
-    int retval = -1;
-
-    char *verity_blk_name;
-    char *verity_table;
-    char *verity_table_signature;
-
-    char buffer[DM_BUF_SIZE];
-    struct dm_ioctl *io = (struct dm_ioctl *) buffer;
-    char *mount_point = basename(fstab->mount_point);
-
-    // set the dm_ioctl flags
-    io->flags |= 1;
-    io->target_count = 1;
-
-    // get the device mapper fd
-    int fd;
-    if ((fd = open("/dev/device-mapper", O_RDWR)) < 0) {
-        ERROR("Error opening device mapper (%s)", strerror(errno));
-        return retval;
-    }
-
-    // create the device
-    if (create_verity_device(io, mount_point, fd) < 0) {
-        ERROR("Couldn't create verity device!");
-        goto out;
-    }
-
-    // get the name of the device file
-    if (get_verity_device_name(io, mount_point, fd, &verity_blk_name) < 0) {
-        ERROR("Couldn't get verity device number!");
-        goto out;
-    }
-
-    // read the verity block at the end of the block device
-    if (read_verity_metadata(fstab->blk_device,
-                                    &verity_table_signature,
-                                    &verity_table) < 0) {
-        goto out;
-    }
-
-    // verify the signature on the table
-    if (verify_table(verity_table_signature,
-                            verity_table,
-                            strlen(verity_table)) < 0) {
-        goto out;
-    }
-
-    // load the verity mapping table
-    if (load_verity_table(io, mount_point, fstab->blk_device, fd, verity_table) < 0) {
-        goto out;
-    }
-
-    // activate the device
-    if (resume_verity_table(io, mount_point, fd) < 0) {
-        goto out;
-    }
-
-    // assign the new verity block device as the block device
-    free(fstab->blk_device);
-    fstab->blk_device = verity_blk_name;
-
-    // make sure we've set everything up properly
-    if (test_access(fstab->blk_device) < 0) {
-        goto out;
-    }
-
-    retval = 0;
-
-out:
-    close(fd);
-    return retval;
-}
diff --git a/crypto/fs_mgr/include/fs_mgr.h b/crypto/fs_mgr/include/fs_mgr.h
deleted file mode 100644
index 0f90c32f1..000000000
--- a/crypto/fs_mgr/include/fs_mgr.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (C) 2012 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __CORE_FS_MGR_H
-#define __CORE_FS_MGR_H
-
-#include <stdint.h>
-#include <linux/dm-ioctl.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct fstab {
-    int num_entries;
-    struct fstab_rec *recs;
-    char *fstab_filename;
-};
-
-struct fstab_rec {
-    char *blk_device;
-    char *mount_point;
-    char *fs_type;
-    unsigned long flags;
-    char *fs_options;
-    int fs_mgr_flags;
-    char *key_loc;
-    char *verity_loc;
-    long long length;
-    char *label;
-    int partnum;
-    int swap_prio;
-    unsigned int zram_size;
-};
-
-struct fstab *fs_mgr_read_fstab(const char *fstab_path);
-void fs_mgr_free_fstab(struct fstab *fstab);
-int fs_mgr_mount_all(struct fstab *fstab);
-int fs_mgr_do_mount(struct fstab *fstab, char *n_name, char *n_blk_device,
-                    char *tmp_mount_point);
-int fs_mgr_do_tmpfs_mount(char *n_name);
-int fs_mgr_unmount_all(struct fstab *fstab);
-int fs_mgr_get_crypt_info(struct fstab *fstab, char *key_loc,
-                          char *real_blk_device, int size);
-int fs_mgr_add_entry(struct fstab *fstab,
-                     const char *mount_point, const char *fs_type,
-                     const char *blk_device, long long length);
-struct fstab_rec *fs_mgr_get_entry_for_mount_point(struct fstab *fstab, const char *path);
-int fs_mgr_is_voldmanaged(struct fstab_rec *fstab);
-int fs_mgr_is_nonremovable(struct fstab_rec *fstab);
-int fs_mgr_is_encryptable(struct fstab_rec *fstab);
-int fs_mgr_is_noemulatedsd(struct fstab_rec *fstab);
-int fs_mgr_swapon_all(struct fstab *fstab);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_FS_MGR_H */
-
diff --git a/crypto/ics/Android.mk b/crypto/ics/Android.mk
deleted file mode 100644
index 5616c195a..000000000
--- a/crypto/ics/Android.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-ifeq ($(TW_INCLUDE_CRYPTO), true)
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := libcryptfsics
-LOCAL_MODULE_TAGS := eng optional
-LOCAL_CFLAGS :=
-LOCAL_CFLAGS += -DCRYPTO_FS_TYPE=\"$(TW_CRYPTO_FS_TYPE)\"
-ifeq ($(TW_INCLUDE_CRYPTO_SAMSUNG), true)
-    LOCAL_CFLAGS += -DTW_INCLUDE_CRYPTO_SAMSUNG=\"$(TW_INCLUDE_CRYPTO_SAMSUNG)\"
-    LOCAL_LDFLAGS += -ldl
-    LOCAL_STATIC_LIBRARIES += libcrypt_samsung
-endif
-ifneq ($(TW_INTERNAL_STORAGE_PATH),)
-	LOCAL_CFLAGS += -DTW_INTERNAL_STORAGE_PATH=$(TW_INTERNAL_STORAGE_PATH)
-endif
-ifneq ($(TW_EXTERNAL_STORAGE_PATH),)
-	LOCAL_CFLAGS += -DTW_EXTERNAL_STORAGE_PATH=$(TW_EXTERNAL_STORAGE_PATH)
-endif
-LOCAL_SRC_FILES = cryptfs.c
-LOCAL_C_INCLUDES += system/extras/ext4_utils external/openssl/include
-LOCAL_SHARED_LIBRARIES += libc liblog libcutils libcrypto
-
-include $(BUILD_SHARED_LIBRARY)
-endif
diff --git a/crypto/ics/cryptfs.c b/crypto/ics/cryptfs.c
deleted file mode 100644
index 4f3d5d01a..000000000
--- a/crypto/ics/cryptfs.c
+++ /dev/null
@@ -1,729 +0,0 @@
-/*
- * Copyright (C) 2010 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/* TO DO:
- *   1.  Perhaps keep several copies of the encrypted key, in case something
- *       goes horribly wrong?
- *
- */
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <sys/ioctl.h>
-#include <linux/dm-ioctl.h>
-#include <libgen.h>
-#include <stdlib.h>
-#include <sys/param.h>
-#include <string.h>
-#include <sys/mount.h>
-#include <openssl/evp.h>
-#include <openssl/sha.h>
-#include <errno.h>
-#include <cutils/android_reboot.h>
-#include <ext4.h>
-#include <linux/kdev_t.h>
-#include "cryptfs.h"
-#define LOG_TAG "Cryptfs"
-#include "cutils/log.h"
-#include "cutils/properties.h"
-#include "hardware_legacy/power.h"
-//#include "VolumeManager.h"
-
-#define DM_CRYPT_BUF_SIZE 4096
-#define DATA_MNT_POINT "/data"
-
-#define HASH_COUNT 2000
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-#define KEY_LEN_BYTES_SAMSUNG (sizeof(edk_t))
-#endif
-#define KEY_LEN_BYTES 16
-#define IV_LEN_BYTES 16
-
-#define KEY_LOC_PROP   "ro.crypto.keyfile.userdata"
-#define KEY_IN_FOOTER  "footer"
-
-#define EXT4_FS 1
-#define FAT_FS 2
-
-#ifndef EXPAND
-#define STRINGIFY(x) #x
-#define EXPAND(x) STRINGIFY(x)
-#endif
-
-char *me = "cryptfs";
-
-static char *saved_data_blkdev;
-static char *saved_mount_point;
-static int  master_key_saved = 0;
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-static int  using_samsung_encryption = 0;
-//static edk_t saved_master_key;
-static unsigned char saved_master_key[KEY_LEN_BYTES_SAMSUNG];
-edk_payload_t edk_payload;
-#else
-static unsigned char saved_master_key[KEY_LEN_BYTES];
-#endif
-
-int cryptfs_setup_volume(const char *label, const char *real_blkdev, char *crypto_blkdev);
-
-
-static void ioctl_init(struct dm_ioctl *io, size_t dataSize, const char *name, unsigned flags)
-{
-    memset(io, 0, dataSize);
-    io->data_size = dataSize;
-    io->data_start = sizeof(struct dm_ioctl);
-    io->version[0] = 4;
-    io->version[1] = 0;
-    io->version[2] = 0;
-    io->flags = flags;
-    if (name) {
-        strncpy(io->name, name, sizeof(io->name));
-    }
-}
-
-static unsigned int get_blkdev_size(int fd)
-{
-  unsigned int nr_sec;
-
-  if ( (ioctl(fd, BLKGETSIZE, &nr_sec)) == -1) {
-    nr_sec = 0;
-  }
-
-  return nr_sec;
-}
-
-/* key or salt can be NULL, in which case just skip writing that value.  Useful to
- * update the failed mount count but not change the key.
- */
-static int put_crypt_ftr_and_key(char *real_blk_name, struct crypt_mnt_ftr *crypt_ftr,
-                                  unsigned char *key, unsigned char *salt)
-{
-  // we don't need to update it...
-  return 0;
-}
-
-static int get_crypt_ftr_and_key(char *real_blk_name, struct crypt_mnt_ftr *crypt_ftr,
-                                  unsigned char *key, unsigned char *salt)
-{
-  int fd;
-  unsigned int nr_sec, cnt;
-  off64_t off;
-  int rc = -1;
-  char key_loc[PROPERTY_VALUE_MAX];
-  char *fname;
-  struct stat statbuf;
-
-  property_get(KEY_LOC_PROP, key_loc, KEY_IN_FOOTER);
-
-  if (!strcmp(key_loc, KEY_IN_FOOTER)) {
-    fname = real_blk_name;
-    if ( (fd = open(fname, O_RDONLY)) < 0) {
-      printf("Cannot open real block device %s\n", fname);
-      return -1;
-    }
-
-    if ( (nr_sec = get_blkdev_size(fd)) == 0) {
-      SLOGE("Cannot get size of block device %s\n", fname);
-      goto errout;
-    }
-
-    /* If it's an encrypted Android partition, the last 16 Kbytes contain the
-     * encryption info footer and key, and plenty of bytes to spare for future
-     * growth.
-     */
-    off = ((off64_t)nr_sec * 512) - CRYPT_FOOTER_OFFSET;
-
-    if (lseek64(fd, off, SEEK_SET) == -1) {
-      printf("Cannot seek to real block device footer\n");
-      goto errout;
-    }
-  } else if (key_loc[0] == '/') {
-    fname = key_loc;
-    if ( (fd = open(fname, O_RDONLY)) < 0) {
-      printf("Cannot open footer file %s\n", fname);
-      return -1;
-    }
-
-    /* Make sure it's 16 Kbytes in length */
-    fstat(fd, &statbuf);
-    if (S_ISREG(statbuf.st_mode) && (statbuf.st_size != 0x4000
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-        && statbuf.st_size != 0x8000
-#endif
-        )) {
-      printf("footer file %s is not the expected size!\n", fname);
-      goto errout;
-    }
-  } else {
-    printf("Unexpected value for" KEY_LOC_PROP "\n");
-    return -1;;
-  }
-
-  if ( (cnt = read(fd, crypt_ftr, sizeof(struct crypt_mnt_ftr))) != sizeof(struct crypt_mnt_ftr)) {
-    printf("Cannot read real block device footer\n");
-    goto errout;
-  }
-
-  if (crypt_ftr->magic != CRYPT_MNT_MAGIC) {
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-	if (crypt_ftr->magic != CRYPT_MNT_MAGIC_SAMSUNG) {
-		printf("Bad magic for real block device %s\n", fname);
-		goto errout;
-	} else {
-		printf("Using Samsung encryption.\n");
-		using_samsung_encryption = 1;
-        if ( (cnt = read(fd, &edk_payload, sizeof(edk_payload_t))) != sizeof(edk_payload_t)) {
-            printf("Cannot read EDK payload from real block device footer\n");
-            goto errout;
-        }
-        if (lseek64(fd, sizeof(__le32), SEEK_CUR) == -1) {
-            printf("Cannot seek past unknown data from real block device footer\n");
-            goto errout;
-        }
-        memcpy(key, &edk_payload, sizeof(edk_payload_t));
-	}
-#else
-    printf("Bad magic for real block device %s\n", fname);
-    goto errout;
-#endif
-  }
-
-  if (crypt_ftr->major_version != 1) {
-    printf("Cannot understand major version %d real block device footer\n",
-          crypt_ftr->major_version);
-    goto errout;
-  }
-
-  if (crypt_ftr->minor_version != 0) {
-    printf("Warning: crypto footer minor version %d, expected 0, continuing...\n",
-          crypt_ftr->minor_version);
-  }
-
-  if (crypt_ftr->ftr_size > sizeof(struct crypt_mnt_ftr)) {
-    /* the footer size is bigger than we expected.
-     * Skip to it's stated end so we can read the key.
-     */
-    if (lseek64(fd, crypt_ftr->ftr_size - sizeof(struct crypt_mnt_ftr),  SEEK_CUR) == -1) {
-      printf("Cannot seek to start of key\n");
-      goto errout;
-    }
-  }
-
-  if (crypt_ftr->keysize > sizeof(saved_master_key)) {
-    printf("Keysize of %d bits not supported for real block device %s\n",
-          crypt_ftr->keysize * 8, fname);
-    goto errout;
-  }
-
-  if ( (cnt = read(fd, key, crypt_ftr->keysize)) != crypt_ftr->keysize) {
-    printf("Cannot read key for real block device %s\n", fname);
-    goto errout;
-  }
-
-  if (lseek64(fd, KEY_TO_SALT_PADDING, SEEK_CUR) == -1) {
-    printf("Cannot seek to real block device salt\n");
-    goto errout;
-  }
-
-  if ( (cnt = read(fd, salt, SALT_LEN)) != SALT_LEN) {
-    printf("Cannot read salt for real block device %s\n", fname);
-    goto errout;
-  }
-
-  /* Success! */
-  rc = 0;
-
-errout:
-  close(fd);
-  return rc;
-}
-
-/* Convert a binary key of specified length into an ascii hex string equivalent,
- * without the leading 0x and with null termination
- */
-void convert_key_to_hex_ascii(unsigned char *master_key, unsigned int keysize,
-                              char *master_key_ascii)
-{
-  unsigned int i, a;
-  unsigned char nibble;
-
-  for (i=0, a=0; i<keysize; i++, a+=2) {
-    /* For each byte, write out two ascii hex digits */
-    nibble = (master_key[i] >> 4) & 0xf;
-    master_key_ascii[a] = nibble + (nibble > 9 ? 0x37 : 0x30);
-
-    nibble = master_key[i] & 0xf;
-    master_key_ascii[a+1] = nibble + (nibble > 9 ? 0x37 : 0x30);
-  }
-
-  /* Add the null termination */
-  master_key_ascii[a] = '\0';
-
-}
-
-static int create_crypto_blk_dev(struct crypt_mnt_ftr *crypt_ftr, unsigned char *master_key,
-                                    const char *real_blk_name, char *crypto_blk_name, const char *name)
-{
-  char buffer[DM_CRYPT_BUF_SIZE];
-  char master_key_ascii[129]; /* Large enough to hold 512 bit key and null */
-  char *crypt_params;
-  struct dm_ioctl *io;
-  struct dm_target_spec *tgt;
-  unsigned int minor;
-  int fd;
-  int retval = -1;
-
-  if ((fd = open("/dev/device-mapper", O_RDWR)) < 0 ) {
-    printf("Cannot open device-mapper\n");
-    goto errout;
-  }
-
-  io = (struct dm_ioctl *) buffer;
-
-  ioctl_init(io, DM_CRYPT_BUF_SIZE, name, 0);
-  if (ioctl(fd, DM_DEV_CREATE, io)) {
-    printf("Cannot create dm-crypt device\n");
-    goto errout;
-  }
-
-  /* Get the device status, in particular, the name of it's device file */
-  ioctl_init(io, DM_CRYPT_BUF_SIZE, name, 0);
-  if (ioctl(fd, DM_DEV_STATUS, io)) {
-    printf("Cannot retrieve dm-crypt device status\n");
-    goto errout;
-  }
-  minor = (io->dev & 0xff) | ((io->dev >> 12) & 0xfff00);
-  snprintf(crypto_blk_name, MAXPATHLEN, "/dev/block/dm-%u", minor);
-
-  /* Load the mapping table for this device */
-  tgt = (struct dm_target_spec *) &buffer[sizeof(struct dm_ioctl)];
-
-  ioctl_init(io, 4096, name, 0);
-  io->target_count = 1;
-  tgt->status = 0;
-  tgt->sector_start = 0;
-  tgt->length = crypt_ftr->fs_size;
-  strcpy(tgt->target_type, "crypt");
-
-  crypt_params = buffer + sizeof(struct dm_ioctl) + sizeof(struct dm_target_spec);
-  convert_key_to_hex_ascii(master_key, crypt_ftr->keysize, master_key_ascii);
-  sprintf(crypt_params, "%s %s 0 %s 0", crypt_ftr->crypto_type_name,
-          master_key_ascii, real_blk_name);
-  //printf("cryptsetup params: '%s'\n", crypt_params);
-  crypt_params += strlen(crypt_params) + 1;
-  crypt_params = (char *) (((unsigned long)crypt_params + 7) & ~8); /* Align to an 8 byte boundary */
-  tgt->next = crypt_params - buffer;
-
-  if (ioctl(fd, DM_TABLE_LOAD, io)) {
-      printf("Cannot load dm-crypt mapping table.\n");
-      goto errout;
-  }
-
-  /* Resume this device to activate it */
-  ioctl_init(io, 4096, name, 0);
-
-  if (ioctl(fd, DM_DEV_SUSPEND, io)) {
-    printf("Cannot resume the dm-crypt device\n");
-    goto errout;
-  }
-
-  /* We made it here with no errors.  Woot! */
-  retval = 0;
-
-errout:
-  close(fd);   /* If fd is <0 from a failed open call, it's safe to just ignore the close error */
-
-  return retval;
-}
-
-static int delete_crypto_blk_dev(const char *name)
-{
-  int fd;
-  char buffer[DM_CRYPT_BUF_SIZE];
-  struct dm_ioctl *io;
-  int retval = -1;
-
-  if ((fd = open("/dev/device-mapper", O_RDWR)) < 0 ) {
-    printf("Cannot open device-mapper\n");
-    goto errout;
-  }
-
-  io = (struct dm_ioctl *) buffer;
-
-  ioctl_init(io, DM_CRYPT_BUF_SIZE, name, 0);
-  if (ioctl(fd, DM_DEV_REMOVE, io)) {
-    printf("Cannot remove dm-crypt device\n");
-    goto errout;
-  }
-
-  /* We made it here with no errors.  Woot! */
-  retval = 0;
-
-errout:
-  close(fd);    /* If fd is <0 from a failed open call, it's safe to just ignore the close error */
-
-  return retval;
-
-}
-
-static void pbkdf2(char *passwd, unsigned char *salt, unsigned char *ikey)
-{
-    /* Turn the password into a key and IV that can decrypt the master key */
-    PKCS5_PBKDF2_HMAC_SHA1(passwd, strlen(passwd), salt, SALT_LEN,
-                           HASH_COUNT, KEY_LEN_BYTES+IV_LEN_BYTES, ikey);
-}
-
-static int decrypt_master_key(char *passwd, unsigned char *salt,
-                              unsigned char *encrypted_master_key,
-                              unsigned char *decrypted_master_key)
-{
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-    if (using_samsung_encryption) {
-		property_set("rw.km_fips_status", "ready");
-		return decrypt_EDK((dek_t*)decrypted_master_key, (edk_payload_t*)encrypted_master_key, passwd);
-	}
-#endif
-
-  unsigned char ikey[32+32] = { 0 }; /* Big enough to hold a 256 bit key and 256 bit IV */
-  EVP_CIPHER_CTX d_ctx;
-  int decrypted_len, final_len;
-
-  /* Turn the password into a key and IV that can decrypt the master key */
-  pbkdf2(passwd, salt, ikey);
-
-  /* Initialize the decryption engine */
-  if (! EVP_DecryptInit(&d_ctx, EVP_aes_128_cbc(), ikey, ikey+KEY_LEN_BYTES)) {
-    return -1;
-  }
-  EVP_CIPHER_CTX_set_padding(&d_ctx, 0); /* Turn off padding as our data is block aligned */
-  /* Decrypt the master key */
-  if (! EVP_DecryptUpdate(&d_ctx, decrypted_master_key, &decrypted_len,
-                            encrypted_master_key, KEY_LEN_BYTES)) {
-    return -1;
-  }
-  if (! EVP_DecryptFinal(&d_ctx, decrypted_master_key + decrypted_len, &final_len)) {
-    return -1;
-  }
-
-  if (decrypted_len + final_len != KEY_LEN_BYTES) {
-    return -1;
-  } else {
-    return 0;
-  }
-}
-
-static int get_orig_mount_parms(
-        const char *mount_point, char *fs_type, char *real_blkdev,
-        unsigned long *mnt_flags, char *fs_options)
-{
-  char mount_point2[PROPERTY_VALUE_MAX];
-  char fs_flags[PROPERTY_VALUE_MAX];
-
-  property_get("ro.crypto.fs_type", fs_type, "");
-  property_get("ro.crypto.fs_real_blkdev", real_blkdev, "");
-  property_get("ro.crypto.fs_mnt_point", mount_point2, "");
-  property_get("ro.crypto.fs_options", fs_options, "");
-  property_get("ro.crypto.fs_flags", fs_flags, "");
-  *mnt_flags = strtol(fs_flags, 0, 0);
-
-  if (strcmp(mount_point, mount_point2)) {
-    /* Consistency check.  These should match. If not, something odd happened. */
-    return -1;
-  }
-
-  return 0;
-}
-
-static int get_orig_mount_parms_sd(
-        const char *mount_point, char *fs_type, char *real_blkdev)
-{
-    char mount_point2[PROPERTY_VALUE_MAX];
-
-    property_get("ro.crypto.sd_fs_type", fs_type, "");
-    property_get("ro.crypto.sd_fs_real_blkdev", real_blkdev, "");
-    property_get("ro.crypto.sd_fs_mnt_point", mount_point2, "");
-
-    if (strcmp(mount_point, mount_point2)) {
-        /* Consistency check.  These should match. If not, something odd happened. */
-        return -1;
-    }
-
-    return 0;
-}
-
-static int test_mount_encrypted_fs(
-        char *passwd, char *mount_point, char *label, char *crypto_blkdev)
-{
-  struct crypt_mnt_ftr crypt_ftr;
-  /* Allocate enough space for a 256 bit key, but we may use less */
-  unsigned char encrypted_master_key[256], decrypted_master_key[32];
-  unsigned char salt[SALT_LEN];
-  char real_blkdev[MAXPATHLEN];
-  char fs_type[PROPERTY_VALUE_MAX];
-  char fs_options[PROPERTY_VALUE_MAX];
-  char tmp_mount_point[MAXPATHLEN];
-  unsigned long mnt_flags;
-  unsigned int orig_failed_decrypt_count;
-  char encrypted_state[PROPERTY_VALUE_MAX];
-  int rc;
-
-  property_get("ro.crypto.state", encrypted_state, "");
-  if ( master_key_saved || strcmp(encrypted_state, "encrypted") ) {
-    printf("encrypted fs already validated or not running with encryption, aborting %s\n", encrypted_state);
-    return -1;
-  }
-
-  if (get_orig_mount_parms(mount_point, fs_type, real_blkdev, &mnt_flags, fs_options)) {
-    printf("Error reading original mount parms for mount point %s\n", mount_point);
-    return -1;
-  }
-
-  if (get_crypt_ftr_and_key(real_blkdev, &crypt_ftr, encrypted_master_key, salt)) {
-    printf("Error getting crypt footer and key\n");
-    return -1;
-  }
-
-  //printf("crypt_ftr->fs_size = %lld\n", crypt_ftr.fs_size);
-  orig_failed_decrypt_count = crypt_ftr.failed_decrypt_count;
-
-  if (! (crypt_ftr.flags & CRYPT_MNT_KEY_UNENCRYPTED) ) {
-    decrypt_master_key(passwd, salt, encrypted_master_key, decrypted_master_key);
-  }
-
-  if (create_crypto_blk_dev(&crypt_ftr, decrypted_master_key, real_blkdev,
-                    crypto_blkdev, label)) {
-    printf("Error creating decrypted block device\n");
-    return -1;
-  }
-
-  /* If init detects an encrypted filesystme, it writes a file for each such
-   * encrypted fs into the tmpfs /data filesystem, and then the framework finds those
-   * files and passes that data to me */
-  /* Create a tmp mount point to try mounting the decryptd fs
-   * Since we're here, the mount_point should be a tmpfs filesystem, so make
-   * a directory in it to test mount the decrypted filesystem.
-   */
-  sprintf(tmp_mount_point, "%s/tmp_mnt", mount_point);
-  mkdir(tmp_mount_point, 0755);
-  if ( mount(crypto_blkdev, tmp_mount_point, fs_type, MS_RDONLY, "") ) {
-    printf("Error temp mounting decrypted block device\n");
-    delete_crypto_blk_dev(label);
-    crypt_ftr.failed_decrypt_count++;
-  } else {
-    /* Success, so just umount and we'll mount it properly when we restart
-     * the framework.
-     */
-    umount(tmp_mount_point);
-    crypt_ftr.failed_decrypt_count  = 0;
-  }
-
-  rmdir(tmp_mount_point);
-
-  if (crypt_ftr.failed_decrypt_count) {
-    /* We failed to mount the device, so return an error */
-    rc = crypt_ftr.failed_decrypt_count;
-
-  } else {
-    /* Woot!  Success!  Save the name of the crypto block device
-     * so we can mount it when restarting the framework.
-     */
-    property_set("ro.crypto.fs_crypto_blkdev", crypto_blkdev);
-
-    /* Also save a the master key so we can reencrypted the key
-     * the key when we want to change the password on it.
-     */
-    memcpy(saved_master_key, decrypted_master_key, sizeof(saved_master_key));
-    saved_data_blkdev = strdup(real_blkdev);
-    saved_mount_point = strdup(mount_point);
-    master_key_saved = 1;
-    rc = 0;
-  }
-
-  return rc;
-}
-
-static int test_mount_encrypted_fs_sd(
-        const char *passwd, const char *mount_point, const char *label)
-{
-    char real_blkdev[MAXPATHLEN];
-    char crypto_blkdev[MAXPATHLEN];
-    char tmp_mount_point[MAXPATHLEN];
-    char encrypted_state[PROPERTY_VALUE_MAX];
-    char fs_type[PROPERTY_VALUE_MAX];
-    int rc;
-
-    property_get("ro.crypto.state", encrypted_state, "");
-    if ( !master_key_saved || strcmp(encrypted_state, "encrypted") ) {
-        printf("encrypted fs not yet validated or not running with encryption, aborting\n");
-        return -1;
-    }
-
-    if (get_orig_mount_parms_sd(mount_point, fs_type, real_blkdev)) {
-        printf("Error reading original mount parms for mount point %s\n", mount_point);
-        return -1;
-    }
-
-    rc = cryptfs_setup_volume(label, real_blkdev, crypto_blkdev);
-    if(rc){
-        printf("Error setting up cryptfs volume %s\n", real_blkdev);
-        return -1;
-    }
-
-    sprintf(tmp_mount_point, "%s/tmp_mnt", mount_point);
-    mkdir(tmp_mount_point, 0755);
-    if ( mount(crypto_blkdev, tmp_mount_point, fs_type, MS_RDONLY, "") ) {
-        printf("Error temp mounting decrypted block device\n");
-        delete_crypto_blk_dev(label);
-    } else {
-        /* Success, so just umount and we'll mount it properly when we restart
-        * the framework.
-        */
-        umount(tmp_mount_point);
-
-        property_set("ro.crypto.sd_fs_crypto_blkdev", crypto_blkdev);
-    }
-
-    rmdir(tmp_mount_point);
-
-    return rc;
-}
-
-/*
- * Called by vold when it's asked to mount an encrypted, nonremovable volume.
- * Setup a dm-crypt mapping, use the saved master key from
- * setting up the /data mapping, and return the new device path.
- */
-int cryptfs_setup_volume(const char *label, const char *real_blkdev, char *crypto_blkdev)
-{
-    struct crypt_mnt_ftr sd_crypt_ftr;
-    unsigned char key[256], salt[32];
-    struct stat statbuf;
-    int nr_sec, fd, rc;
-
-    /* Just want the footer, but gotta get it all */
-    get_crypt_ftr_and_key(saved_data_blkdev, &sd_crypt_ftr, key, salt);
-
-    /* Update the fs_size field to be the size of the volume */
-    fd = open(real_blkdev, O_RDONLY);
-    nr_sec = get_blkdev_size(fd);
-    close(fd);
-    if (nr_sec == 0) {
-        SLOGE("Cannot get size of volume %s\n", real_blkdev);
-        return -1;
-    }
-
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-    if(using_samsung_encryption) {
-        if(!access("/efs/essiv", R_OK)){
-            strcpy(sd_crypt_ftr.crypto_type_name, "aes-cbc-plain:sha1");
-        }
-        else if(!access("/efs/cryptprop_essiv", R_OK)){
-            strcpy(sd_crypt_ftr.crypto_type_name, "aes-cbc-essiv:sha256");
-        }
-    }
-#endif
-
-    sd_crypt_ftr.fs_size = nr_sec;
-    rc = create_crypto_blk_dev(
-            &sd_crypt_ftr, saved_master_key, real_blkdev, crypto_blkdev, label);
-
-    stat(crypto_blkdev, &statbuf);
-
-    return rc;
-}
-
-int cryptfs_crypto_complete(void)
-{
-  return -1;
-}
-
-int cryptfs_check_footer(void)
-{
-    int rc = -1;
-    char fs_type[PROPERTY_VALUE_MAX];
-    char real_blkdev[MAXPATHLEN];
-    char fs_options[PROPERTY_VALUE_MAX];
-    unsigned long mnt_flags;
-    struct crypt_mnt_ftr crypt_ftr;
-    /* Allocate enough space for a 256 bit key, but we may use less */
-    unsigned char encrypted_master_key[256];
-    unsigned char salt[SALT_LEN];
-
-    if (get_orig_mount_parms(DATA_MNT_POINT, fs_type, real_blkdev, &mnt_flags, fs_options)) {
-        printf("Error reading original mount parms for mount point %s\n", DATA_MNT_POINT);
-        return rc;
-    }
-
-    rc = get_crypt_ftr_and_key(real_blkdev, &crypt_ftr, encrypted_master_key, salt);
-
-    return rc;
-}
-
-int cryptfs_check_passwd(const char *passwd)
-{
-    char pwbuf[256];
-    char crypto_blkdev_data[MAXPATHLEN];
-    int rc = -1;
-
-    strcpy(pwbuf, passwd);
-    rc = test_mount_encrypted_fs(pwbuf, DATA_MNT_POINT, "userdata", crypto_blkdev_data);
-
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-    if(using_samsung_encryption) {
-
-        int rc2 = 1;
-#ifndef RECOVERY_SDCARD_ON_DATA
-#ifdef TW_INTERNAL_STORAGE_PATH
-		// internal storage for non data/media devices
-        if(!rc) {
-            strcpy(pwbuf, passwd);
-            rc2 = test_mount_encrypted_fs_sd(
-                    pwbuf, EXPAND(TW_INTERNAL_STORAGE_PATH),
-                    EXPAND(TW_INTERNAL_STORAGE_MOUNT_POINT));
-        }
-#endif
-#endif
-#ifdef TW_EXTERNAL_STORAGE_PATH
-		printf("Temp mounting /data\n");
-		// mount data so mount_ecryptfs_drive can access edk in /data/system/
-		rc2 = mount(crypto_blkdev_data, DATA_MNT_POINT, CRYPTO_FS_TYPE, MS_RDONLY, "");
-        // external sd
-		char decrypt_external[256], external_blkdev[256];
-		property_get("ro.crypto.external_encrypted", decrypt_external, "0");
-		// Mount the external storage as ecryptfs so that ecryptfs can act as a pass-through
-		if (!rc2 && strcmp(decrypt_external, "1") == 0) {
-			printf("Mounting external with ecryptfs...\n");
-            strcpy(pwbuf, passwd);
-            rc2 = mount_ecryptfs_drive(
-                    pwbuf, EXPAND(TW_EXTERNAL_STORAGE_PATH),
-                    EXPAND(TW_EXTERNAL_STORAGE_PATH), 0);
-			if (rc2 == 0)
-				property_set("ro.crypto.external_use_ecryptfs", "1");
-			else
-				property_set("ro.crypto.external_use_ecryptfs", "0");
-        } else {
-			printf("Unable to mount external storage with ecryptfs.\n");
-			umount(EXPAND(TW_EXTERNAL_STORAGE_PATH));
-		}
-        umount(DATA_MNT_POINT);
-    }
-#endif // #ifdef TW_EXTERNAL_STORAGE_PATH
-#endif // #ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-    return rc;
-}
diff --git a/crypto/ics/cryptfs.h b/crypto/ics/cryptfs.h
deleted file mode 100644
index 8c8037659..000000000
--- a/crypto/ics/cryptfs.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright (C) 2010 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/* This structure starts 16,384 bytes before the end of a hardware
- * partition that is encrypted.
- * Immediately following this structure is the encrypted key.
- * The keysize field tells how long the key is, in bytes.
- * Then there is 32 bytes of padding,
- * Finally there is the salt used with the user password.
- * The salt is fixed at 16 bytes long.
- * Obviously, the filesystem does not include the last 16 kbytes
- * of the partition.
- */
-
-#ifndef __CRYPTFS_H__
-#define __CRYPTFS_H__
-
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-#include "../libcrypt_samsung/include/libcrypt_samsung.h"
-#endif
-
-#define CRYPT_FOOTER_OFFSET 0x4000
-
-#define MAX_CRYPTO_TYPE_NAME_LEN 64
-
-#define SALT_LEN 16
-#define KEY_TO_SALT_PADDING 32
-
-/* definitions of flags in the structure below */
-#define CRYPT_MNT_KEY_UNENCRYPTED 0x1 /* The key for the partition is not encrypted. */
-#define CRYPT_ENCRYPTION_IN_PROGRESS 0x2 /* Set when starting encryption,
-                                          * clear when done before rebooting */
-
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-#define CRYPT_MNT_MAGIC_SAMSUNG 0xD0B5B1C5
-#endif
-#define CRYPT_MNT_MAGIC 0xD0B5B1C4
-
-#define __le32 unsigned int
-#define __le16 unsigned short int 
-
-#pragma pack(1)
-
-struct crypt_mnt_ftr {
-  __le32 magic;		/* See above */
-  __le16 major_version;
-  __le16 minor_version;
-  __le32 ftr_size; 	/* in bytes, not including key following */
-  __le32 flags;		/* See above */
-  __le32 keysize;	/* in bytes */
-  __le32 spare1;	/* ignored */
-  __le64 fs_size;	/* Size of the encrypted fs, in 512 byte sectors */
-  __le32 failed_decrypt_count; /* count of # of failed attempts to decrypt and
-				  mount, set to 0 on successful mount */
-  char crypto_type_name[MAX_CRYPTO_TYPE_NAME_LEN]; /* The type of encryption
-							       needed to decrypt this
-							       partition, null terminated */
-};
-
-#pragma pack()
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-  int cryptfs_check_footer(void);
-  int cryptfs_check_passwd(const char *pw);
-#ifdef __cplusplus
-}
-#endif
-
-#endif // __CRYPTFS_H__
-
diff --git a/crypto/jb/Android.mk b/crypto/jb/Android.mk
deleted file mode 100644
index 90321d67e..000000000
--- a/crypto/jb/Android.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-ifeq ($(TW_INCLUDE_JB_CRYPTO), true)
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := libcryptfsjb
-LOCAL_MODULE_TAGS := eng optional
-LOCAL_CFLAGS :=
-LOCAL_SRC_FILES = cryptfs.c
-LOCAL_C_INCLUDES += \
-    system/extras/ext4_utils \
-    external/openssl/include \
-    $(commands_recovery_local_path)/crypto/scrypt/lib/crypto
-LOCAL_SHARED_LIBRARIES += libc liblog libcutils libcrypto libext4_utils
-LOCAL_STATIC_LIBRARIES += libfs_mgrtwrp libscrypttwrp_static liblogwraptwrp libmincrypttwrp
-
-include $(BUILD_SHARED_LIBRARY)
-endif
diff --git a/crypto/jb/cryptfs.c b/crypto/jb/cryptfs.c
deleted file mode 100644
index f9c0d7489..000000000
--- a/crypto/jb/cryptfs.c
+++ /dev/null
@@ -1,1735 +0,0 @@
-/*
- * Copyright (C) 2010 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/* TO DO:
- *   1.  Perhaps keep several copies of the encrypted key, in case something
- *       goes horribly wrong?
- *
- */
-
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <sys/ioctl.h>
-#include <linux/dm-ioctl.h>
-#include <libgen.h>
-#include <stdlib.h>
-#include <sys/param.h>
-#include <string.h>
-#include <sys/mount.h>
-#include <openssl/evp.h>
-#include <openssl/sha.h>
-#include <errno.h>
-#include <ext4.h>
-#include <linux/kdev_t.h>
-#include <fs_mgr.h>
-#include "cryptfs.h"
-#define LOG_TAG "Cryptfs"
-#include "cutils/log.h"
-#include "cutils/properties.h"
-#include "cutils/android_reboot.h"
-#include "hardware_legacy/power.h"
-/*#include <logwrap/logwrap.h>
-#include "VolumeManager.h"
-#include "VoldUtil.h"*/
-#include "crypto_scrypt.h"
-
-#define DM_CRYPT_BUF_SIZE 4096
-#define DATA_MNT_POINT "/data"
-
-#define HASH_COUNT 2000
-#define KEY_LEN_BYTES 16
-#define IV_LEN_BYTES 16
-
-#define KEY_IN_FOOTER  "footer"
-
-#define EXT4_FS 1
-#define FAT_FS 2
-
-#define TABLE_LOAD_RETRIES 10
-
-char *me = "cryptfs";
-
-static unsigned char saved_master_key[KEY_LEN_BYTES];
-static char *saved_mount_point;
-static int  master_key_saved = 0;
-static struct crypt_persist_data *persist_data = NULL;
-
-struct fstab *fstab;
-
-static void cryptfs_reboot(int recovery)
-{
-    /*if (recovery) {
-        property_set(ANDROID_RB_PROPERTY, "reboot,recovery");
-    } else {
-        property_set(ANDROID_RB_PROPERTY, "reboot");
-    }
-    sleep(20);*/
-
-    /* Shouldn't get here, reboot should happen before sleep times out */
-    return;
-}
-
-static void ioctl_init(struct dm_ioctl *io, size_t dataSize, const char *name, unsigned flags)
-{
-    memset(io, 0, dataSize);
-    io->data_size = dataSize;
-    io->data_start = sizeof(struct dm_ioctl);
-    io->version[0] = 4;
-    io->version[1] = 0;
-    io->version[2] = 0;
-    io->flags = flags;
-    if (name) {
-        strncpy(io->name, name, sizeof(io->name));
-    }
-}
-
-/**
- * Gets the default device scrypt parameters for key derivation time tuning.
- * The parameters should lead to about one second derivation time for the
- * given device.
- */
-static void get_device_scrypt_params(struct crypt_mnt_ftr *ftr) {
-    const int default_params[] = SCRYPT_DEFAULTS;
-    int params[] = SCRYPT_DEFAULTS;
-    char paramstr[PROPERTY_VALUE_MAX];
-    char *token;
-    char *saveptr;
-    int i;
-
-    property_get(SCRYPT_PROP, paramstr, "");
-    if (paramstr[0] != '\0') {
-        /*
-         * The token we're looking for should be three integers separated by
-         * colons (e.g., "12:8:1"). Scan the property to make sure it matches.
-         */
-        for (i = 0, token = strtok_r(paramstr, ":", &saveptr);
-                token != NULL && i < 3;
-                i++, token = strtok_r(NULL, ":", &saveptr)) {
-            char *endptr;
-            params[i] = strtol(token, &endptr, 10);
-
-            /*
-             * Check that there was a valid number and it's 8-bit. If not,
-             * break out and the end check will take the default values.
-             */
-            if ((*token == '\0') || (*endptr != '\0') || params[i] < 0 || params[i] > 255) {
-                break;
-            }
-        }
-
-        /*
-         * If there were not enough tokens or a token was malformed (not an
-         * integer), it will end up here and the default parameters can be
-         * taken.
-         */
-        if ((i != 3) || (token != NULL)) {
-            printf("bad scrypt parameters '%s' should be like '12:8:1'; using defaults", paramstr);
-            memcpy(params, default_params, sizeof(params));
-        }
-    }
-
-    ftr->N_factor = params[0];
-    ftr->r_factor = params[1];
-    ftr->p_factor = params[2];
-}
-
-static unsigned int get_fs_size(char *dev)
-{
-    int fd, block_size;
-    struct ext4_super_block sb;
-    off64_t len;
-
-    if ((fd = open(dev, O_RDONLY)) < 0) {
-        printf("Cannot open device to get filesystem size ");
-        return 0;
-    }
-
-    if (lseek64(fd, 1024, SEEK_SET) < 0) {
-        printf("Cannot seek to superblock");
-        return 0;
-    }
-
-    if (read(fd, &sb, sizeof(sb)) != sizeof(sb)) {
-        printf("Cannot read superblock");
-        return 0;
-    }
-
-    close(fd);
-
-    block_size = 1024 << sb.s_log_block_size;
-    /* compute length in bytes */
-    len = ( ((off64_t)sb.s_blocks_count_hi << 32) + sb.s_blocks_count_lo) * block_size;
-
-    /* return length in sectors */
-    return (unsigned int) (len / 512);
-}
-
-static unsigned int get_blkdev_size(int fd)
-{
-  unsigned int nr_sec;
-
-  if ( (ioctl(fd, BLKGETSIZE, &nr_sec)) == -1) {
-    nr_sec = 0;
-  }
-
-  return nr_sec;
-}
-
-static int get_crypt_ftr_info(char **metadata_fname, off64_t *off)
-{
-  static int cached_data = 0;
-  static off64_t cached_off = 0;
-  static char cached_metadata_fname[PROPERTY_VALUE_MAX] = "";
-  int fd;
-  char key_loc[PROPERTY_VALUE_MAX];
-  char real_blkdev[PROPERTY_VALUE_MAX];
-  unsigned int nr_sec;
-  int rc = -1;
-
-  if (!cached_data) {
-    fs_mgr_get_crypt_info(fstab, key_loc, real_blkdev, sizeof(key_loc));
-
-    if (!strcmp(key_loc, KEY_IN_FOOTER)) {
-      if ( (fd = open(real_blkdev, O_RDWR)) < 0) {
-        printf("Cannot open real block device %s\n", real_blkdev);
-        return -1;
-      }
-
-      if ((nr_sec = get_blkdev_size(fd))) {
-        /* If it's an encrypted Android partition, the last 16 Kbytes contain the
-         * encryption info footer and key, and plenty of bytes to spare for future
-         * growth.
-         */
-        strlcpy(cached_metadata_fname, real_blkdev, sizeof(cached_metadata_fname));
-        cached_off = ((off64_t)nr_sec * 512) - CRYPT_FOOTER_OFFSET;
-        cached_data = 1;
-      } else {
-        printf("Cannot get size of block device %s\n", real_blkdev);
-      }
-      close(fd);
-    } else {
-      strlcpy(cached_metadata_fname, key_loc, sizeof(cached_metadata_fname));
-      cached_off = 0;
-      cached_data = 1;
-    }
-  }
-
-  if (cached_data) {
-    if (metadata_fname) {
-        *metadata_fname = cached_metadata_fname;
-    }
-    if (off) {
-        *off = cached_off;
-    }
-    rc = 0;
-  }
-
-  return rc;
-}
-
-/* key or salt can be NULL, in which case just skip writing that value.  Useful to
- * update the failed mount count but not change the key.
- */
-static int put_crypt_ftr_and_key(struct crypt_mnt_ftr *crypt_ftr)
-{
-  int fd;
-  unsigned int nr_sec, cnt;
-  /* starting_off is set to the SEEK_SET offset
-   * where the crypto structure starts
-   */
-  off64_t starting_off;
-  int rc = -1;
-  char *fname = NULL;
-  struct stat statbuf;
-
-  if (get_crypt_ftr_info(&fname, &starting_off)) {
-    printf("Unable to get crypt_ftr_info\n");
-    return -1;
-  }
-  if (fname[0] != '/') {
-    printf("Unexpected value for crypto key location\n");
-    return -1;
-  }
-  if ( (fd = open(fname, O_RDWR | O_CREAT, 0600)) < 0) {
-    printf("Cannot open footer file %s for put\n", fname);
-    return -1;
-  }
-
-  /* Seek to the start of the crypt footer */
-  if (lseek64(fd, starting_off, SEEK_SET) == -1) {
-    printf("Cannot seek to real block device footer\n");
-    goto errout;
-  }
-
-  if ((cnt = write(fd, crypt_ftr, sizeof(struct crypt_mnt_ftr))) != sizeof(struct crypt_mnt_ftr)) {
-    printf("Cannot write real block device footer\n");
-    goto errout;
-  }
-
-  fstat(fd, &statbuf);
-  /* If the keys are kept on a raw block device, do not try to truncate it. */
-  if (S_ISREG(statbuf.st_mode)) {
-    if (ftruncate(fd, 0x4000)) {
-      printf("Cannot set footer file size\n", fname);
-      goto errout;
-    }
-  }
-
-  /* Success! */
-  rc = 0;
-
-errout:
-  close(fd);
-  return rc;
-
-}
-
-static inline int unix_read(int  fd, void*  buff, int  len)
-{
-    return TEMP_FAILURE_RETRY(read(fd, buff, len));
-}
-
-static inline int unix_write(int  fd, const void*  buff, int  len)
-{
-    return TEMP_FAILURE_RETRY(write(fd, buff, len));
-}
-
-static void init_empty_persist_data(struct crypt_persist_data *pdata, int len)
-{
-    memset(pdata, 0, len);
-    pdata->persist_magic = PERSIST_DATA_MAGIC;
-    pdata->persist_valid_entries = 0;
-}
-
-/* A routine to update the passed in crypt_ftr to the lastest version.
- * fd is open read/write on the device that holds the crypto footer and persistent
- * data, crypt_ftr is a pointer to the struct to be updated, and offset is the
- * absolute offset to the start of the crypt_mnt_ftr on the passed in fd.
- */
-static void upgrade_crypt_ftr(int fd, struct crypt_mnt_ftr *crypt_ftr, off64_t offset)
-{
-    int orig_major = crypt_ftr->major_version;
-    int orig_minor = crypt_ftr->minor_version;
-    return; // in recovery we don't want to upgrade
-    if ((crypt_ftr->major_version == 1) && (crypt_ftr->minor_version == 0)) {
-        struct crypt_persist_data *pdata;
-        off64_t pdata_offset = offset + CRYPT_FOOTER_TO_PERSIST_OFFSET;
-
-        printf("upgrading crypto footer to 1.1");
-
-        pdata = malloc(CRYPT_PERSIST_DATA_SIZE);
-        if (pdata == NULL) {
-            printf("Cannot allocate persisent data\n");
-            return;
-        }
-        memset(pdata, 0, CRYPT_PERSIST_DATA_SIZE);
-
-        /* Need to initialize the persistent data area */
-        if (lseek64(fd, pdata_offset, SEEK_SET) == -1) {
-            printf("Cannot seek to persisent data offset\n");
-            return;
-        }
-        /* Write all zeros to the first copy, making it invalid */
-        unix_write(fd, pdata, CRYPT_PERSIST_DATA_SIZE);
-
-        /* Write a valid but empty structure to the second copy */
-        init_empty_persist_data(pdata, CRYPT_PERSIST_DATA_SIZE);
-        unix_write(fd, pdata, CRYPT_PERSIST_DATA_SIZE);
-
-        /* Update the footer */
-        crypt_ftr->persist_data_size = CRYPT_PERSIST_DATA_SIZE;
-        crypt_ftr->persist_data_offset[0] = pdata_offset;
-        crypt_ftr->persist_data_offset[1] = pdata_offset + CRYPT_PERSIST_DATA_SIZE;
-        crypt_ftr->minor_version = 1;
-    }
-
-    if ((crypt_ftr->major_version == 1) && (crypt_ftr->minor_version)) {
-        printf("upgrading crypto footer to 1.2");
-        crypt_ftr->kdf_type = KDF_PBKDF2;
-        get_device_scrypt_params(crypt_ftr);
-        crypt_ftr->minor_version = 2;
-    }
-
-    if ((orig_major != crypt_ftr->major_version) || (orig_minor != crypt_ftr->minor_version)) {
-        if (lseek64(fd, offset, SEEK_SET) == -1) {
-            printf("Cannot seek to crypt footer\n");
-            return;
-        }
-        unix_write(fd, crypt_ftr, sizeof(struct crypt_mnt_ftr));
-    }
-}
-
-
-static int get_crypt_ftr_and_key(struct crypt_mnt_ftr *crypt_ftr)
-{
-  int fd;
-  unsigned int nr_sec, cnt;
-  off64_t starting_off;
-  int rc = -1;
-  char *fname = NULL;
-  struct stat statbuf;
-
-  if (get_crypt_ftr_info(&fname, &starting_off)) {
-    printf("Unable to get crypt_ftr_info\n");
-    return -1;
-  }
-  if (fname[0] != '/') {
-    printf("Unexpected value for crypto key location\n");
-    return -1;
-  }
-  if ( (fd = open(fname, O_RDWR)) < 0) {
-    printf("Cannot open footer file %s for get\n", fname);
-    return -1;
-  }
-
-  /* Make sure it's 16 Kbytes in length */
-  fstat(fd, &statbuf);
-  if (S_ISREG(statbuf.st_mode) && (statbuf.st_size != 0x4000)) {
-    printf("footer file %s is not the expected size!\n", fname);
-    goto errout;
-  }
-
-  /* Seek to the start of the crypt footer */
-  if (lseek64(fd, starting_off, SEEK_SET) == -1) {
-    printf("Cannot seek to real block device footer\n");
-    goto errout;
-  }
-
-  if ( (cnt = read(fd, crypt_ftr, sizeof(struct crypt_mnt_ftr))) != sizeof(struct crypt_mnt_ftr)) {
-    printf("Cannot read real block device footer\n");
-    goto errout;
-  }
-
-  if (crypt_ftr->magic != CRYPT_MNT_MAGIC) {
-    printf("Bad magic for real block device %s\n", fname);
-    goto errout;
-  }
-
-  if (crypt_ftr->major_version != CURRENT_MAJOR_VERSION) {
-    printf("Cannot understand major version %d real block device footer; expected %d\n",
-          crypt_ftr->major_version, CURRENT_MAJOR_VERSION);
-    goto errout;
-  }
-
-  if (crypt_ftr->minor_version > CURRENT_MINOR_VERSION) {
-    printf("Warning: crypto footer minor version %d, expected <= %d, continuing...\n",
-          crypt_ftr->minor_version, CURRENT_MINOR_VERSION);
-  }
-
-  /* If this is a verion 1.0 crypt_ftr, make it a 1.1 crypt footer, and update the
-   * copy on disk before returning.
-   */
-  /*if (crypt_ftr->minor_version < CURRENT_MINOR_VERSION) {
-    upgrade_crypt_ftr(fd, crypt_ftr, starting_off);
-  }*/
-
-  /* Success! */
-  rc = 0;
-
-errout:
-  close(fd);
-  return rc;
-}
-
-static int validate_persistent_data_storage(struct crypt_mnt_ftr *crypt_ftr)
-{
-    if (crypt_ftr->persist_data_offset[0] + crypt_ftr->persist_data_size >
-        crypt_ftr->persist_data_offset[1]) {
-        printf("Crypt_ftr persist data regions overlap");
-        return -1;
-    }
-
-    if (crypt_ftr->persist_data_offset[0] >= crypt_ftr->persist_data_offset[1]) {
-        printf("Crypt_ftr persist data region 0 starts after region 1");
-        return -1;
-    }
-
-    if (((crypt_ftr->persist_data_offset[1] + crypt_ftr->persist_data_size) -
-        (crypt_ftr->persist_data_offset[0] - CRYPT_FOOTER_TO_PERSIST_OFFSET)) >
-        CRYPT_FOOTER_OFFSET) {
-        printf("Persistent data extends past crypto footer");
-        return -1;
-    }
-
-    return 0;
-}
-
-static int load_persistent_data(void)
-{
-    struct crypt_mnt_ftr crypt_ftr;
-    struct crypt_persist_data *pdata = NULL;
-    char encrypted_state[PROPERTY_VALUE_MAX];
-    char *fname;
-    int found = 0;
-    int fd;
-    int ret;
-    int i;
-
-    if (persist_data) {
-        /* Nothing to do, we've already loaded or initialized it */
-        return 0;
-    }
-
-
-    /* If not encrypted, just allocate an empty table and initialize it */
-    property_get("ro.crypto.state", encrypted_state, "");
-    if (strcmp(encrypted_state, "encrypted") ) {
-        pdata = malloc(CRYPT_PERSIST_DATA_SIZE);
-        if (pdata) {
-            init_empty_persist_data(pdata, CRYPT_PERSIST_DATA_SIZE);
-            persist_data = pdata;
-            return 0;
-        }
-        return -1;
-    }
-
-    if(get_crypt_ftr_and_key(&crypt_ftr)) {
-        return -1;
-    }
-
-    if ((crypt_ftr.major_version != 1) || (crypt_ftr.minor_version != 1)) {
-        printf("Crypt_ftr version doesn't support persistent data");
-        return -1;
-    }
-
-    if (get_crypt_ftr_info(&fname, NULL)) {
-        return -1;
-    }
-
-    ret = validate_persistent_data_storage(&crypt_ftr);
-    if (ret) {
-        return -1;
-    }
-
-    fd = open(fname, O_RDONLY);
-    if (fd < 0) {
-        printf("Cannot open %s metadata file", fname);
-        return -1;
-    }
-
-    if (persist_data == NULL) {
-        pdata = malloc(crypt_ftr.persist_data_size);
-        if (pdata == NULL) {
-            printf("Cannot allocate memory for persistent data");
-            goto err;
-        }
-    }
-
-    for (i = 0; i < 2; i++) {
-        if (lseek64(fd, crypt_ftr.persist_data_offset[i], SEEK_SET) < 0) {
-            printf("Cannot seek to read persistent data on %s", fname);
-            goto err2;
-        }
-        if (unix_read(fd, pdata, crypt_ftr.persist_data_size) < 0){
-            printf("Error reading persistent data on iteration %d", i);
-            goto err2;
-        }
-        if (pdata->persist_magic == PERSIST_DATA_MAGIC) {
-            found = 1;
-            break;
-        }
-    }
-
-    if (!found) {
-        printf("Could not find valid persistent data, creating");
-        init_empty_persist_data(pdata, crypt_ftr.persist_data_size);
-    }
-
-    /* Success */
-    persist_data = pdata;
-    close(fd);
-    return 0;
-
-err2:
-    free(pdata);
-
-err:
-    close(fd);
-    return -1;
-}
-
-static int save_persistent_data(void)
-{
-    struct crypt_mnt_ftr crypt_ftr;
-    struct crypt_persist_data *pdata;
-    char *fname;
-    off64_t write_offset;
-    off64_t erase_offset;
-    int found = 0;
-    int fd;
-    int ret;
-
-    if (persist_data == NULL) {
-        printf("No persistent data to save");
-        return -1;
-    }
-
-    if(get_crypt_ftr_and_key(&crypt_ftr)) {
-        return -1;
-    }
-
-    if ((crypt_ftr.major_version != 1) || (crypt_ftr.minor_version != 1)) {
-        printf("Crypt_ftr version doesn't support persistent data");
-        return -1;
-    }
-
-    ret = validate_persistent_data_storage(&crypt_ftr);
-    if (ret) {
-        return -1;
-    }
-
-    if (get_crypt_ftr_info(&fname, NULL)) {
-        return -1;
-    }
-
-    fd = open(fname, O_RDWR);
-    if (fd < 0) {
-        printf("Cannot open %s metadata file", fname);
-        return -1;
-    }
-
-    pdata = malloc(crypt_ftr.persist_data_size);
-    if (pdata == NULL) {
-        printf("Cannot allocate persistant data");
-        goto err;
-    }
-
-    if (lseek64(fd, crypt_ftr.persist_data_offset[0], SEEK_SET) < 0) {
-        printf("Cannot seek to read persistent data on %s", fname);
-        goto err2;
-    }
-
-    if (unix_read(fd, pdata, crypt_ftr.persist_data_size) < 0) {
-            printf("Error reading persistent data before save");
-            goto err2;
-    }
-
-    if (pdata->persist_magic == PERSIST_DATA_MAGIC) {
-        /* The first copy is the curent valid copy, so write to
-         * the second copy and erase this one */
-       write_offset = crypt_ftr.persist_data_offset[1];
-       erase_offset = crypt_ftr.persist_data_offset[0];
-    } else {
-        /* The second copy must be the valid copy, so write to
-         * the first copy, and erase the second */
-       write_offset = crypt_ftr.persist_data_offset[0];
-       erase_offset = crypt_ftr.persist_data_offset[1];
-    }
-
-    /* Write the new copy first, if successful, then erase the old copy */
-    if (lseek(fd, write_offset, SEEK_SET) < 0) {
-        printf("Cannot seek to write persistent data");
-        goto err2;
-    }
-    if (unix_write(fd, persist_data, crypt_ftr.persist_data_size) ==
-        (int) crypt_ftr.persist_data_size) {
-        if (lseek(fd, erase_offset, SEEK_SET) < 0) {
-            printf("Cannot seek to erase previous persistent data");
-            goto err2;
-        }
-        fsync(fd);
-        memset(pdata, 0, crypt_ftr.persist_data_size);
-        if (unix_write(fd, pdata, crypt_ftr.persist_data_size) !=
-            (int) crypt_ftr.persist_data_size) {
-            printf("Cannot write to erase previous persistent data");
-            goto err2;
-        }
-        fsync(fd);
-    } else {
-        printf("Cannot write to save persistent data");
-        goto err2;
-    }
-
-    /* Success */
-    free(pdata);
-    close(fd);
-    return 0;
-
-err2:
-    free(pdata);
-err:
-    close(fd);
-    return -1;
-}
-
-/* Convert a binary key of specified length into an ascii hex string equivalent,
- * without the leading 0x and with null termination
- */
-void convert_key_to_hex_ascii(unsigned char *master_key, unsigned int keysize,
-                              char *master_key_ascii)
-{
-  unsigned int i, a;
-  unsigned char nibble;
-
-  for (i=0, a=0; i<keysize; i++, a+=2) {
-    /* For each byte, write out two ascii hex digits */
-    nibble = (master_key[i] >> 4) & 0xf;
-    master_key_ascii[a] = nibble + (nibble > 9 ? 0x37 : 0x30);
-
-    nibble = master_key[i] & 0xf;
-    master_key_ascii[a+1] = nibble + (nibble > 9 ? 0x37 : 0x30);
-  }
-
-  /* Add the null termination */
-  master_key_ascii[a] = '\0';
-
-}
-
-static int load_crypto_mapping_table(struct crypt_mnt_ftr *crypt_ftr, unsigned char *master_key,
-                                     char *real_blk_name, const char *name, int fd,
-                                     char *extra_params)
-{
-  char buffer[DM_CRYPT_BUF_SIZE];
-  struct dm_ioctl *io;
-  struct dm_target_spec *tgt;
-  char *crypt_params;
-  char master_key_ascii[129]; /* Large enough to hold 512 bit key and null */
-  int i;
-
-  io = (struct dm_ioctl *) buffer;
-
-  /* Load the mapping table for this device */
-  tgt = (struct dm_target_spec *) &buffer[sizeof(struct dm_ioctl)];
-
-  ioctl_init(io, DM_CRYPT_BUF_SIZE, name, 0);
-  io->target_count = 1;
-  tgt->status = 0;
-  tgt->sector_start = 0;
-  tgt->length = crypt_ftr->fs_size;
-  strcpy(tgt->target_type, "crypt");
-
-  crypt_params = buffer + sizeof(struct dm_ioctl) + sizeof(struct dm_target_spec);
-  convert_key_to_hex_ascii(master_key, crypt_ftr->keysize, master_key_ascii);
-  sprintf(crypt_params, "%s %s 0 %s 0 %s", crypt_ftr->crypto_type_name,
-          master_key_ascii, real_blk_name, extra_params);
-  crypt_params += strlen(crypt_params) + 1;
-  crypt_params = (char *) (((unsigned long)crypt_params + 7) & ~8); /* Align to an 8 byte boundary */
-  tgt->next = crypt_params - buffer;
-
-  for (i = 0; i < TABLE_LOAD_RETRIES; i++) {
-    if (! ioctl(fd, DM_TABLE_LOAD, io)) {
-      break;
-    }
-    usleep(500000);
-  }
-
-  if (i == TABLE_LOAD_RETRIES) {
-    /* We failed to load the table, return an error */
-    return -1;
-  } else {
-    return i + 1;
-  }
-}
-
-
-static int get_dm_crypt_version(int fd, const char *name,  int *version)
-{
-    char buffer[DM_CRYPT_BUF_SIZE];
-    struct dm_ioctl *io;
-    struct dm_target_versions *v;
-    int i;
-
-    io = (struct dm_ioctl *) buffer;
-
-    ioctl_init(io, DM_CRYPT_BUF_SIZE, name, 0);
-
-    if (ioctl(fd, DM_LIST_VERSIONS, io)) {
-        return -1;
-    }
-
-    /* Iterate over the returned versions, looking for name of "crypt".
-     * When found, get and return the version.
-     */
-    v = (struct dm_target_versions *) &buffer[sizeof(struct dm_ioctl)];
-    while (v->next) {
-        if (! strcmp(v->name, "crypt")) {
-            /* We found the crypt driver, return the version, and get out */
-            version[0] = v->version[0];
-            version[1] = v->version[1];
-            version[2] = v->version[2];
-            return 0;
-        }
-        v = (struct dm_target_versions *)(((char *)v) + v->next);
-    }
-
-    return -1;
-}
-
-static int create_crypto_blk_dev(struct crypt_mnt_ftr *crypt_ftr, unsigned char *master_key,
-                                    char *real_blk_name, char *crypto_blk_name, const char *name)
-{
-  char buffer[DM_CRYPT_BUF_SIZE];
-  char master_key_ascii[129]; /* Large enough to hold 512 bit key and null */
-  char *crypt_params;
-  struct dm_ioctl *io;
-  struct dm_target_spec *tgt;
-  unsigned int minor;
-  int fd;
-  int i;
-  int retval = -1;
-  int version[3];
-  char *extra_params;
-  int load_count;
-
-  if ((fd = open("/dev/device-mapper", O_RDWR)) < 0 ) {
-    printf("Cannot open device-mapper\n");
-    goto errout;
-  }
-
-  io = (struct dm_ioctl *) buffer;
-
-  ioctl_init(io, DM_CRYPT_BUF_SIZE, name, 0);
-  if (ioctl(fd, DM_DEV_CREATE, io)) {
-    printf("Cannot create dm-crypt device\n");
-    goto errout;
-  }
-
-  /* Get the device status, in particular, the name of it's device file */
-  ioctl_init(io, DM_CRYPT_BUF_SIZE, name, 0);
-  if (ioctl(fd, DM_DEV_STATUS, io)) {
-    printf("Cannot retrieve dm-crypt device status\n");
-    goto errout;
-  }
-  minor = (io->dev & 0xff) | ((io->dev >> 12) & 0xfff00);
-  snprintf(crypto_blk_name, MAXPATHLEN, "/dev/block/dm-%u", minor);
-
-  extra_params = "";
-  if (! get_dm_crypt_version(fd, name, version)) {
-      /* Support for allow_discards was added in version 1.11.0 */
-      if ((version[0] >= 2) ||
-          ((version[0] == 1) && (version[1] >= 11))) {
-          extra_params = "1 allow_discards";
-          printf("Enabling support for allow_discards in dmcrypt.\n");
-      }
-  }
-
-  load_count = load_crypto_mapping_table(crypt_ftr, master_key, real_blk_name, name,
-                                         fd, extra_params);
-  if (load_count < 0) {
-      printf("Cannot load dm-crypt mapping table.\n");
-      goto errout;
-  } else if (load_count > 1) {
-      printf("Took %d tries to load dmcrypt table.\n", load_count);
-  }
-
-  /* Resume this device to activate it */
-  ioctl_init(io, DM_CRYPT_BUF_SIZE, name, 0);
-
-  if (ioctl(fd, DM_DEV_SUSPEND, io)) {
-    printf("Cannot resume the dm-crypt device\n");
-    goto errout;
-  }
-
-  /* We made it here with no errors.  Woot! */
-  retval = 0;
-
-errout:
-  close(fd);   /* If fd is <0 from a failed open call, it's safe to just ignore the close error */
-
-  return retval;
-}
-
-static int delete_crypto_blk_dev(char *name)
-{
-  int fd;
-  char buffer[DM_CRYPT_BUF_SIZE];
-  struct dm_ioctl *io;
-  int retval = -1;
-
-  if ((fd = open("/dev/device-mapper", O_RDWR)) < 0 ) {
-    printf("Cannot open device-mapper\n");
-    goto errout;
-  }
-
-  io = (struct dm_ioctl *) buffer;
-
-  ioctl_init(io, DM_CRYPT_BUF_SIZE, name, 0);
-  if (ioctl(fd, DM_DEV_REMOVE, io)) {
-    printf("Cannot remove dm-crypt device\n");
-    goto errout;
-  }
-
-  /* We made it here with no errors.  Woot! */
-  retval = 0;
-
-errout:
-  close(fd);    /* If fd is <0 from a failed open call, it's safe to just ignore the close error */
-
-  return retval;
-
-}
-
-static void pbkdf2(char *passwd, unsigned char *salt, unsigned char *ikey, void *params) {
-    /* Turn the password into a key and IV that can decrypt the master key */
-    PKCS5_PBKDF2_HMAC_SHA1(passwd, strlen(passwd), salt, SALT_LEN,
-                           HASH_COUNT, KEY_LEN_BYTES+IV_LEN_BYTES, ikey);
-}
-
-static void scrypt(char *passwd, unsigned char *salt, unsigned char *ikey, void *params) {
-    struct crypt_mnt_ftr *ftr = (struct crypt_mnt_ftr *) params;
-
-    int N = 1 << ftr->N_factor;
-    int r = 1 << ftr->r_factor;
-    int p = 1 << ftr->p_factor;
-
-    /* Turn the password into a key and IV that can decrypt the master key */
-    crypto_scrypt((unsigned char *) passwd, strlen(passwd), salt, SALT_LEN, N, r, p, ikey,
-            KEY_LEN_BYTES + IV_LEN_BYTES);
-}
-
-static int encrypt_master_key(char *passwd, unsigned char *salt,
-                              unsigned char *decrypted_master_key,
-                              unsigned char *encrypted_master_key,
-                              struct crypt_mnt_ftr *crypt_ftr)
-{
-    unsigned char ikey[32+32] = { 0 }; /* Big enough to hold a 256 bit key and 256 bit IV */
-    EVP_CIPHER_CTX e_ctx;
-    int encrypted_len, final_len;
-
-    /* Turn the password into a key and IV that can decrypt the master key */
-    get_device_scrypt_params(crypt_ftr);
-    scrypt(passwd, salt, ikey, crypt_ftr);
-
-    /* Initialize the decryption engine */
-    if (! EVP_EncryptInit(&e_ctx, EVP_aes_128_cbc(), ikey, ikey+KEY_LEN_BYTES)) {
-        printf("EVP_EncryptInit failed\n");
-        return -1;
-    }
-    EVP_CIPHER_CTX_set_padding(&e_ctx, 0); /* Turn off padding as our data is block aligned */
-
-    /* Encrypt the master key */
-    if (! EVP_EncryptUpdate(&e_ctx, encrypted_master_key, &encrypted_len,
-                              decrypted_master_key, KEY_LEN_BYTES)) {
-        printf("EVP_EncryptUpdate failed\n");
-        return -1;
-    }
-    if (! EVP_EncryptFinal(&e_ctx, encrypted_master_key + encrypted_len, &final_len)) {
-        printf("EVP_EncryptFinal failed\n");
-        return -1;
-    }
-
-    if (encrypted_len + final_len != KEY_LEN_BYTES) {
-        printf("EVP_Encryption length check failed with %d, %d bytes\n", encrypted_len, final_len);
-        return -1;
-    } else {
-        return 0;
-    }
-}
-
-static int decrypt_master_key(char *passwd, unsigned char *salt,
-                              unsigned char *encrypted_master_key,
-                              unsigned char *decrypted_master_key,
-                              kdf_func kdf, void *kdf_params)
-{
-  unsigned char ikey[32+32] = { 0 }; /* Big enough to hold a 256 bit key and 256 bit IV */
-  EVP_CIPHER_CTX d_ctx;
-  int decrypted_len, final_len;
-
-  /* Turn the password into a key and IV that can decrypt the master key */
-  kdf(passwd, salt, ikey, kdf_params);
-
-  /* Initialize the decryption engine */
-  if (! EVP_DecryptInit(&d_ctx, EVP_aes_128_cbc(), ikey, ikey+KEY_LEN_BYTES)) {
-    return -1;
-  }
-  EVP_CIPHER_CTX_set_padding(&d_ctx, 0); /* Turn off padding as our data is block aligned */
-  /* Decrypt the master key */
-  if (! EVP_DecryptUpdate(&d_ctx, decrypted_master_key, &decrypted_len,
-                            encrypted_master_key, KEY_LEN_BYTES)) {
-    return -1;
-  }
-  if (! EVP_DecryptFinal(&d_ctx, decrypted_master_key + decrypted_len, &final_len)) {
-    return -1;
-  }
-
-  if (decrypted_len + final_len != KEY_LEN_BYTES) {
-    return -1;
-  } else {
-    return 0;
-  }
-}
-
-static void get_kdf_func(struct crypt_mnt_ftr *ftr, kdf_func *kdf, void** kdf_params)
-{
-    if (ftr->kdf_type == KDF_SCRYPT) {
-        *kdf = scrypt;
-        *kdf_params = ftr;
-    } else {
-        *kdf = pbkdf2;
-        *kdf_params = NULL;
-    }
-}
-
-static int decrypt_master_key_and_upgrade(char *passwd, unsigned char *decrypted_master_key,
-        struct crypt_mnt_ftr *crypt_ftr)
-{
-    kdf_func kdf;
-    void *kdf_params;
-    int ret;
-
-    get_kdf_func(crypt_ftr, &kdf, &kdf_params);
-    ret = decrypt_master_key(passwd, crypt_ftr->salt, crypt_ftr->master_key, decrypted_master_key, kdf,
-            kdf_params);
-    if (ret != 0) {
-        printf("failure decrypting master key");
-        return ret;
-    }
-
-    /*
-     * Upgrade if we're not using the latest KDF.
-     */
-    /*if (crypt_ftr->kdf_type != KDF_SCRYPT) {
-        crypt_ftr->kdf_type = KDF_SCRYPT;
-        encrypt_master_key(passwd, crypt_ftr->salt, decrypted_master_key, crypt_ftr->master_key,
-                crypt_ftr);
-        put_crypt_ftr_and_key(crypt_ftr);
-    }*/
-
-    return ret;
-}
-
-static int create_encrypted_random_key(char *passwd, unsigned char *master_key, unsigned char *salt,
-        struct crypt_mnt_ftr *crypt_ftr) {
-    int fd;
-    unsigned char key_buf[KEY_LEN_BYTES];
-    EVP_CIPHER_CTX e_ctx;
-    int encrypted_len, final_len;
-
-    /* Get some random bits for a key */
-    fd = open("/dev/urandom", O_RDONLY);
-    read(fd, key_buf, sizeof(key_buf));
-    read(fd, salt, SALT_LEN);
-    close(fd);
-
-    /* Now encrypt it with the password */
-    return encrypt_master_key(passwd, salt, key_buf, master_key, crypt_ftr);
-}
-
-static int wait_and_unmount(char *mountpoint)
-{
-    int i, rc;
-#define WAIT_UNMOUNT_COUNT 20
-
-    /*  Now umount the tmpfs filesystem */
-    for (i=0; i<WAIT_UNMOUNT_COUNT; i++) {
-        if (umount(mountpoint)) {
-            if (errno == EINVAL) {
-                /* EINVAL is returned if the directory is not a mountpoint,
-                 * i.e. there is no filesystem mounted there.  So just get out.
-                 */
-                break;
-            }
-            sleep(1);
-            i++;
-        } else {
-          break;
-        }
-    }
-
-    if (i < WAIT_UNMOUNT_COUNT) {
-      printf("unmounting %s succeeded\n", mountpoint);
-      rc = 0;
-    } else {
-      printf("unmounting %s failed\n", mountpoint);
-      rc = -1;
-    }
-
-    return rc;
-}
-
-#define DATA_PREP_TIMEOUT 200
-static int prep_data_fs(void)
-{
-    int i;
-
-    /* Do the prep of the /data filesystem */
-    property_set("vold.post_fs_data_done", "0");
-    property_set("vold.decrypt", "trigger_post_fs_data");
-    printf("Just triggered post_fs_data\n");
-
-    /* Wait a max of 50 seconds, hopefully it takes much less */
-    for (i=0; i<DATA_PREP_TIMEOUT; i++) {
-        char p[PROPERTY_VALUE_MAX];
-
-        property_get("vold.post_fs_data_done", p, "0");
-        if (*p == '1') {
-            break;
-        } else {
-            usleep(250000);
-        }
-    }
-    if (i == DATA_PREP_TIMEOUT) {
-        /* Ugh, we failed to prep /data in time.  Bail. */
-        printf("post_fs_data timed out!\n");
-        return -1;
-    } else {
-        printf("post_fs_data done\n");
-        return 0;
-    }
-}
-
-int cryptfs_restart(void)
-{
-    char fs_type[32];
-    char real_blkdev[MAXPATHLEN];
-    char crypto_blkdev[MAXPATHLEN];
-    char fs_options[256];
-    unsigned long mnt_flags;
-    struct stat statbuf;
-    int rc = -1, i;
-    static int restart_successful = 0;
-
-    /* Validate that it's OK to call this routine */
-    if (! master_key_saved) {
-        printf("Encrypted filesystem not validated, aborting");
-        return -1;
-    }
-
-    if (restart_successful) {
-        printf("System already restarted with encrypted disk, aborting");
-        return -1;
-    }
-
-    /* Here is where we shut down the framework.  The init scripts
-     * start all services in one of three classes: core, main or late_start.
-     * On boot, we start core and main.  Now, we stop main, but not core,
-     * as core includes vold and a few other really important things that
-     * we need to keep running.  Once main has stopped, we should be able
-     * to umount the tmpfs /data, then mount the encrypted /data.
-     * We then restart the class main, and also the class late_start.
-     * At the moment, I've only put a few things in late_start that I know
-     * are not needed to bring up the framework, and that also cause problems
-     * with unmounting the tmpfs /data, but I hope to add add more services
-     * to the late_start class as we optimize this to decrease the delay
-     * till the user is asked for the password to the filesystem.
-     */
-
-    /* The init files are setup to stop the class main when vold.decrypt is
-     * set to trigger_reset_main.
-     */
-    property_set("vold.decrypt", "trigger_reset_main");
-    printf("Just asked init to shut down class main\n");
-
-    /* Ugh, shutting down the framework is not synchronous, so until it
-     * can be fixed, this horrible hack will wait a moment for it all to
-     * shut down before proceeding.  Without it, some devices cannot
-     * restart the graphics services.
-     */
-    sleep(2);
-
-    /* Now that the framework is shutdown, we should be able to umount()
-     * the tmpfs filesystem, and mount the real one.
-     */
-
-    property_get("ro.crypto.fs_crypto_blkdev", crypto_blkdev, "");
-    if (strlen(crypto_blkdev) == 0) {
-        printf("fs_crypto_blkdev not set\n");
-        return -1;
-    }
-
-    if (! (rc = wait_and_unmount(DATA_MNT_POINT)) ) {
-        /* If that succeeded, then mount the decrypted filesystem */
-        fs_mgr_do_mount(fstab, DATA_MNT_POINT, crypto_blkdev, 0);
-
-        property_set("vold.decrypt", "trigger_load_persist_props");
-        /* Create necessary paths on /data */
-        if (prep_data_fs()) {
-            return -1;
-        }
-
-        /* startup service classes main and late_start */
-        property_set("vold.decrypt", "trigger_restart_framework");
-        printf("Just triggered restart_framework\n");
-
-        /* Give it a few moments to get started */
-        sleep(1);
-    }
-
-    if (rc == 0) {
-        restart_successful = 1;
-    }
-
-    return rc;
-}
-
-static int do_crypto_complete(char *mount_point)
-{
-  struct crypt_mnt_ftr crypt_ftr;
-  char encrypted_state[PROPERTY_VALUE_MAX];
-  char key_loc[PROPERTY_VALUE_MAX];
-
-  property_get("ro.crypto.state", encrypted_state, "");
-  if (strcmp(encrypted_state, "encrypted") ) {
-    printf("not running with encryption, aborting");
-    return 1;
-  }
-
-  if (get_crypt_ftr_and_key(&crypt_ftr)) {
-    fs_mgr_get_crypt_info(fstab, key_loc, 0, sizeof(key_loc));
-
-    /*
-     * Only report this error if key_loc is a file and it exists.
-     * If the device was never encrypted, and /data is not mountable for
-     * some reason, returning 1 should prevent the UI from presenting the
-     * a "enter password" screen, or worse, a "press button to wipe the
-     * device" screen.
-     */
-    if ((key_loc[0] == '/') && (access("key_loc", F_OK) == -1)) {
-      printf("master key file does not exist, aborting");
-      return 1;
-    } else {
-      printf("Error getting crypt footer and key\n");
-      return -1;
-    }
-  }
-
-  if (crypt_ftr.flags & CRYPT_ENCRYPTION_IN_PROGRESS) {
-    printf("Encryption process didn't finish successfully\n");
-    return -2;  /* -2 is the clue to the UI that there is no usable data on the disk,
-                 * and give the user an option to wipe the disk */
-  }
-
-  /* We passed the test! We shall diminish, and return to the west */
-  return 0;
-}
-
-static int test_mount_encrypted_fs(char *passwd, char *mount_point, char *label)
-{
-  struct crypt_mnt_ftr crypt_ftr;
-  /* Allocate enough space for a 256 bit key, but we may use less */
-  unsigned char decrypted_master_key[32];
-  char crypto_blkdev[MAXPATHLEN];
-  char real_blkdev[MAXPATHLEN];
-  char tmp_mount_point[64];
-  unsigned int orig_failed_decrypt_count;
-  char encrypted_state[PROPERTY_VALUE_MAX];
-  int rc;
-  kdf_func kdf;
-  void *kdf_params;
-
-  property_get("ro.crypto.state", encrypted_state, "");
-  if ( master_key_saved || strcmp(encrypted_state, "encrypted") ) {
-    printf("encrypted fs already validated or not running with encryption, aborting");
-    return -1;
-  }
-
-  fs_mgr_get_crypt_info(fstab, 0, real_blkdev, sizeof(real_blkdev));
-
-  if (get_crypt_ftr_and_key(&crypt_ftr)) {
-    printf("Error getting crypt footer and key\n");
-    return -1;
-  }
-
-  printf("crypt_ftr->fs_size = %lld\n", crypt_ftr.fs_size);
-  orig_failed_decrypt_count = crypt_ftr.failed_decrypt_count;
-
-  if (! (crypt_ftr.flags & CRYPT_MNT_KEY_UNENCRYPTED) ) {
-    decrypt_master_key_and_upgrade(passwd, decrypted_master_key, &crypt_ftr);
-  }
-
-  if (create_crypto_blk_dev(&crypt_ftr, decrypted_master_key,
-                               real_blkdev, crypto_blkdev, label)) {
-    printf("Error creating decrypted block device\n");
-    return -1;
-  }
-
-  /* If init detects an encrypted filesystem, it writes a file for each such
-   * encrypted fs into the tmpfs /data filesystem, and then the framework finds those
-   * files and passes that data to me */
-  /* Create a tmp mount point to try mounting the decryptd fs
-   * Since we're here, the mount_point should be a tmpfs filesystem, so make
-   * a directory in it to test mount the decrypted filesystem.
-   */
-  sprintf(tmp_mount_point, "%s/tmp_mnt", mount_point);
-  mkdir(tmp_mount_point, 0755);
-  if (fs_mgr_do_mount(fstab, DATA_MNT_POINT, crypto_blkdev, tmp_mount_point)) {
-    printf("Error temp mounting decrypted block device\n");
-    delete_crypto_blk_dev(label);
-    crypt_ftr.failed_decrypt_count++;
-  } else {
-    /* Success, so just umount and we'll mount it properly when we restart
-     * the framework.
-     */
-    umount(tmp_mount_point);
-    crypt_ftr.failed_decrypt_count  = 0;
-  }
-
-  if (orig_failed_decrypt_count != crypt_ftr.failed_decrypt_count) {
-    put_crypt_ftr_and_key(&crypt_ftr);
-  }
-
-  if (crypt_ftr.failed_decrypt_count) {
-    /* We failed to mount the device, so return an error */
-    rc = crypt_ftr.failed_decrypt_count;
-
-  } else {
-    /* Woot!  Success!  Save the name of the crypto block device
-     * so we can mount it when restarting the framework.
-     */
-    property_set("ro.crypto.fs_crypto_blkdev", crypto_blkdev);
-
-    /* Also save a the master key so we can reencrypted the key
-     * the key when we want to change the password on it.
-     */
-    memcpy(saved_master_key, decrypted_master_key, KEY_LEN_BYTES);
-    saved_mount_point = strdup(mount_point);
-    master_key_saved = 1;
-    rc = 0;
-  }
-
-  return rc;
-}
-
-/* Called by vold when it wants to undo the crypto mapping of a volume it
- * manages.  This is usually in response to a factory reset, when we want
- * to undo the crypto mapping so the volume is formatted in the clear.
- */
-int cryptfs_revert_volume(const char *label)
-{
-    return delete_crypto_blk_dev((char *)label);
-}
-
-/*
- * Called by vold when it's asked to mount an encrypted, nonremovable volume.
- * Setup a dm-crypt mapping, use the saved master key from
- * setting up the /data mapping, and return the new device path.
- */
-int cryptfs_setup_volume(const char *label, int major, int minor,
-                         char *crypto_sys_path, unsigned int max_path,
-                         int *new_major, int *new_minor)
-{
-    char real_blkdev[MAXPATHLEN], crypto_blkdev[MAXPATHLEN];
-    struct crypt_mnt_ftr sd_crypt_ftr;
-    struct stat statbuf;
-    int nr_sec, fd;
-
-    sprintf(real_blkdev, "/dev/block/vold/%d:%d", major, minor);
-
-    get_crypt_ftr_and_key(&sd_crypt_ftr);
-
-    /* Update the fs_size field to be the size of the volume */
-    fd = open(real_blkdev, O_RDONLY);
-    nr_sec = get_blkdev_size(fd);
-    close(fd);
-    if (nr_sec == 0) {
-        printf("Cannot get size of volume %s\n", real_blkdev);
-        return -1;
-    }
-
-    sd_crypt_ftr.fs_size = nr_sec;
-    create_crypto_blk_dev(&sd_crypt_ftr, saved_master_key, real_blkdev, 
-                          crypto_blkdev, label);
-
-    stat(crypto_blkdev, &statbuf);
-    *new_major = MAJOR(statbuf.st_rdev);
-    *new_minor = MINOR(statbuf.st_rdev);
-
-    /* Create path to sys entry for this block device */
-    snprintf(crypto_sys_path, max_path, "/devices/virtual/block/%s", strrchr(crypto_blkdev, '/')+1);
-
-    return 0;
-}
-
-int cryptfs_crypto_complete(void)
-{
-  return do_crypto_complete("/data");
-}
-
-#define FSTAB_PREFIX "/fstab."
-
-int cryptfs_check_footer(void)
-{
-    int rc = -1;
-    char fstab_filename[PROPERTY_VALUE_MAX + sizeof(FSTAB_PREFIX)];
-    char propbuf[PROPERTY_VALUE_MAX];
-    struct crypt_mnt_ftr crypt_ftr;
-
-    property_get("ro.hardware", propbuf, "");
-    snprintf(fstab_filename, sizeof(fstab_filename), FSTAB_PREFIX"%s", propbuf);
-
-    fstab = fs_mgr_read_fstab(fstab_filename);
-    if (!fstab) {
-        printf("failed to open %s\n", fstab_filename);
-        return -1;
-    }
-
-    rc = get_crypt_ftr_and_key(&crypt_ftr);
-
-    return rc;
-}
-
-int cryptfs_check_passwd(char *passwd)
-{
-    int rc = -1;
-    char fstab_filename[PROPERTY_VALUE_MAX + sizeof(FSTAB_PREFIX)];
-    char propbuf[PROPERTY_VALUE_MAX];
-
-    property_get("ro.hardware", propbuf, "");
-    snprintf(fstab_filename, sizeof(fstab_filename), FSTAB_PREFIX"%s", propbuf);
-
-    fstab = fs_mgr_read_fstab(fstab_filename);
-    if (!fstab) {
-        printf("failed to open %s\n", fstab_filename);
-        return -1;
-    }
-
-    rc = test_mount_encrypted_fs(passwd, DATA_MNT_POINT, "userdata");
-
-    return rc;
-}
-
-int cryptfs_verify_passwd(char *passwd)
-{
-    struct crypt_mnt_ftr crypt_ftr;
-    /* Allocate enough space for a 256 bit key, but we may use less */
-    unsigned char decrypted_master_key[32];
-    char encrypted_state[PROPERTY_VALUE_MAX];
-    int rc;
-
-    property_get("ro.crypto.state", encrypted_state, "");
-    if (strcmp(encrypted_state, "encrypted") ) {
-        printf("device not encrypted, aborting");
-        return -2;
-    }
-
-    if (!master_key_saved) {
-        printf("encrypted fs not yet mounted, aborting");
-        return -1;
-    }
-
-    if (!saved_mount_point) {
-        printf("encrypted fs failed to save mount point, aborting");
-        return -1;
-    }
-
-    if (get_crypt_ftr_and_key(&crypt_ftr)) {
-        printf("Error getting crypt footer and key\n");
-        return -1;
-    }
-
-    if (crypt_ftr.flags & CRYPT_MNT_KEY_UNENCRYPTED) {
-        /* If the device has no password, then just say the password is valid */
-        rc = 0;
-    } else {
-        decrypt_master_key_and_upgrade(passwd, decrypted_master_key, &crypt_ftr);
-        if (!memcmp(decrypted_master_key, saved_master_key, crypt_ftr.keysize)) {
-            /* They match, the password is correct */
-            rc = 0;
-        } else {
-            /* If incorrect, sleep for a bit to prevent dictionary attacks */
-            sleep(1);
-            rc = 1;
-        }
-    }
-
-    return rc;
-}
-
-/* Initialize a crypt_mnt_ftr structure.  The keysize is
- * defaulted to 16 bytes, and the filesystem size to 0.
- * Presumably, at a minimum, the caller will update the
- * filesystem size and crypto_type_name after calling this function.
- */
-static void cryptfs_init_crypt_mnt_ftr(struct crypt_mnt_ftr *ftr)
-{
-    off64_t off;
-
-    memset(ftr, 0, sizeof(struct crypt_mnt_ftr));
-    ftr->magic = CRYPT_MNT_MAGIC;
-    ftr->major_version = CURRENT_MAJOR_VERSION;
-    ftr->minor_version = CURRENT_MINOR_VERSION;
-    ftr->ftr_size = sizeof(struct crypt_mnt_ftr);
-    ftr->keysize = KEY_LEN_BYTES;
-
-    ftr->kdf_type = KDF_SCRYPT;
-    get_device_scrypt_params(ftr);
-
-    ftr->persist_data_size = CRYPT_PERSIST_DATA_SIZE;
-    if (get_crypt_ftr_info(NULL, &off) == 0) {
-        ftr->persist_data_offset[0] = off + CRYPT_FOOTER_TO_PERSIST_OFFSET;
-        ftr->persist_data_offset[1] = off + CRYPT_FOOTER_TO_PERSIST_OFFSET +
-                                    ftr->persist_data_size;
-    }
-}
-
-static int cryptfs_enable_wipe(char *crypto_blkdev, off64_t size, int type)
-{
-    return -1;
-}
-
-#define CRYPT_INPLACE_BUFSIZE 4096
-#define CRYPT_SECTORS_PER_BUFSIZE (CRYPT_INPLACE_BUFSIZE / 512)
-static int cryptfs_enable_inplace(char *crypto_blkdev, char *real_blkdev, off64_t size,
-                                  off64_t *size_already_done, off64_t tot_size)
-{
-    int realfd, cryptofd;
-    char *buf[CRYPT_INPLACE_BUFSIZE];
-    int rc = -1;
-    off64_t numblocks, i, remainder;
-    off64_t one_pct, cur_pct, new_pct;
-    off64_t blocks_already_done, tot_numblocks;
-
-    if ( (realfd = open(real_blkdev, O_RDONLY)) < 0) { 
-        printf("Error opening real_blkdev %s for inplace encrypt\n", real_blkdev);
-        return -1;
-    }
-
-    if ( (cryptofd = open(crypto_blkdev, O_WRONLY)) < 0) { 
-        printf("Error opening crypto_blkdev %s for inplace encrypt\n", crypto_blkdev);
-        close(realfd);
-        return -1;
-    }
-
-    /* This is pretty much a simple loop of reading 4K, and writing 4K.
-     * The size passed in is the number of 512 byte sectors in the filesystem.
-     * So compute the number of whole 4K blocks we should read/write,
-     * and the remainder.
-     */
-    numblocks = size / CRYPT_SECTORS_PER_BUFSIZE;
-    remainder = size % CRYPT_SECTORS_PER_BUFSIZE;
-    tot_numblocks = tot_size / CRYPT_SECTORS_PER_BUFSIZE;
-    blocks_already_done = *size_already_done / CRYPT_SECTORS_PER_BUFSIZE;
-
-    printf("Encrypting filesystem in place...");
-
-    one_pct = tot_numblocks / 100;
-    cur_pct = 0;
-    /* process the majority of the filesystem in blocks */
-    for (i=0; i<numblocks; i++) {
-        new_pct = (i + blocks_already_done) / one_pct;
-        if (new_pct > cur_pct) {
-            char buf[8];
-
-            cur_pct = new_pct;
-            snprintf(buf, sizeof(buf), "%lld", cur_pct);
-            property_set("vold.encrypt_progress", buf);
-        }
-        if (unix_read(realfd, buf, CRYPT_INPLACE_BUFSIZE) <= 0) {
-            printf("Error reading real_blkdev %s for inplace encrypt\n", crypto_blkdev);
-            goto errout;
-        }
-        if (unix_write(cryptofd, buf, CRYPT_INPLACE_BUFSIZE) <= 0) {
-            printf("Error writing crypto_blkdev %s for inplace encrypt\n", crypto_blkdev);
-            goto errout;
-        }
-    }
-
-    /* Do any remaining sectors */
-    for (i=0; i<remainder; i++) {
-        if (unix_read(realfd, buf, 512) <= 0) {
-            printf("Error reading rival sectors from real_blkdev %s for inplace encrypt\n", crypto_blkdev);
-            goto errout;
-        }
-        if (unix_write(cryptofd, buf, 512) <= 0) {
-            printf("Error writing final sectors to crypto_blkdev %s for inplace encrypt\n", crypto_blkdev);
-            goto errout;
-        }
-    }
-
-    *size_already_done += size;
-    rc = 0;
-
-errout:
-    close(realfd);
-    close(cryptofd);
-
-    return rc;
-}
-
-#define CRYPTO_ENABLE_WIPE 1
-#define CRYPTO_ENABLE_INPLACE 2
-
-#define FRAMEWORK_BOOT_WAIT 60
-
-static inline int should_encrypt(struct volume_info *volume)
-{
-    return (volume->flags & (VOL_ENCRYPTABLE | VOL_NONREMOVABLE)) == 
-            (VOL_ENCRYPTABLE | VOL_NONREMOVABLE);
-}
-
-int cryptfs_enable(char *howarg, char *passwd)
-{
-    return -1;
-}
-
-int cryptfs_changepw(char *newpw)
-{
-    struct crypt_mnt_ftr crypt_ftr;
-    unsigned char decrypted_master_key[KEY_LEN_BYTES];
-
-    /* This is only allowed after we've successfully decrypted the master key */
-    if (! master_key_saved) {
-        printf("Key not saved, aborting");
-        return -1;
-    }
-
-    /* get key */
-    if (get_crypt_ftr_and_key(&crypt_ftr)) {
-      printf("Error getting crypt footer and key");
-      return -1;
-    }
-
-    encrypt_master_key(newpw, crypt_ftr.salt, saved_master_key, crypt_ftr.master_key, &crypt_ftr);
-
-    /* save the key */
-    put_crypt_ftr_and_key(&crypt_ftr);
-
-    return 0;
-}
-
-static int persist_get_key(char *fieldname, char *value)
-{
-    unsigned int i;
-
-    if (persist_data == NULL) {
-        return -1;
-    }
-    for (i = 0; i < persist_data->persist_valid_entries; i++) {
-        if (!strncmp(persist_data->persist_entry[i].key, fieldname, PROPERTY_KEY_MAX)) {
-            /* We found it! */
-            strlcpy(value, persist_data->persist_entry[i].val, PROPERTY_VALUE_MAX);
-            return 0;
-        }
-    }
-
-    return -1;
-}
-
-static int persist_set_key(char *fieldname, char *value, int encrypted)
-{
-    unsigned int i;
-    unsigned int num;
-    struct crypt_mnt_ftr crypt_ftr;
-    unsigned int max_persistent_entries;
-    unsigned int dsize;
-
-    if (persist_data == NULL) {
-        return -1;
-    }
-
-    /* If encrypted, use the values from the crypt_ftr, otherwise
-     * use the values for the current spec.
-     */
-    if (encrypted) {
-        if(get_crypt_ftr_and_key(&crypt_ftr)) {
-            return -1;
-        }
-        dsize = crypt_ftr.persist_data_size;
-    } else {
-        dsize = CRYPT_PERSIST_DATA_SIZE;
-    }
-    max_persistent_entries = (dsize - sizeof(struct crypt_persist_data)) /
-                             sizeof(struct crypt_persist_entry);
-
-    num = persist_data->persist_valid_entries;
-
-    for (i = 0; i < num; i++) {
-        if (!strncmp(persist_data->persist_entry[i].key, fieldname, PROPERTY_KEY_MAX)) {
-            /* We found an existing entry, update it! */
-            memset(persist_data->persist_entry[i].val, 0, PROPERTY_VALUE_MAX);
-            strlcpy(persist_data->persist_entry[i].val, value, PROPERTY_VALUE_MAX);
-            return 0;
-        }
-    }
-
-    /* We didn't find it, add it to the end, if there is room */
-    if (persist_data->persist_valid_entries < max_persistent_entries) {
-        memset(&persist_data->persist_entry[num], 0, sizeof(struct crypt_persist_entry));
-        strlcpy(persist_data->persist_entry[num].key, fieldname, PROPERTY_KEY_MAX);
-        strlcpy(persist_data->persist_entry[num].val, value, PROPERTY_VALUE_MAX);
-        persist_data->persist_valid_entries++;
-        return 0;
-    }
-
-    return -1;
-}
-
-/* Return the value of the specified field. */
-int cryptfs_getfield(char *fieldname, char *value, int len)
-{
-    char temp_value[PROPERTY_VALUE_MAX];
-    char real_blkdev[MAXPATHLEN];
-    /* 0 is success, 1 is not encrypted,
-     * -1 is value not set, -2 is any other error
-     */
-    int rc = -2;
-
-    if (persist_data == NULL) {
-        load_persistent_data();
-        if (persist_data == NULL) {
-            printf("Getfield error, cannot load persistent data");
-            goto out;
-        }
-    }
-
-    if (!persist_get_key(fieldname, temp_value)) {
-        /* We found it, copy it to the caller's buffer and return */
-        strlcpy(value, temp_value, len);
-        rc = 0;
-    } else {
-        /* Sadness, it's not there.  Return the error */
-        rc = -1;
-    }
-
-out:
-    return rc;
-}
-
-/* Set the value of the specified field. */
-int cryptfs_setfield(char *fieldname, char *value)
-{
-    struct crypt_persist_data stored_pdata;
-    struct crypt_persist_data *pdata_p;
-    struct crypt_mnt_ftr crypt_ftr;
-    char encrypted_state[PROPERTY_VALUE_MAX];
-    /* 0 is success, -1 is an error */
-    int rc = -1;
-    int encrypted = 0;
-
-    if (persist_data == NULL) {
-        load_persistent_data();
-        if (persist_data == NULL) {
-            printf("Setfield error, cannot load persistent data");
-            goto out;
-        }
-    }
-
-    property_get("ro.crypto.state", encrypted_state, "");
-    if (!strcmp(encrypted_state, "encrypted") ) {
-        encrypted = 1;
-    }
-
-    if (persist_set_key(fieldname, value, encrypted)) {
-        goto out;
-    }
-
-    /* If we are running encrypted, save the persistent data now */
-    if (encrypted) {
-        if (save_persistent_data()) {
-            printf("Setfield error, cannot save persistent data");
-            goto out;
-        }
-    }
-
-    rc = 0;
-
-out:
-    return rc;
-}
diff --git a/crypto/jb/cryptfs.h b/crypto/jb/cryptfs.h
deleted file mode 100644
index d815814d3..000000000
--- a/crypto/jb/cryptfs.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * Copyright (C) 2010 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/* This structure starts 16,384 bytes before the end of a hardware
- * partition that is encrypted, or in a separate partition.  It's location
- * is specified by a property set in init.<device>.rc.
- * The structure allocates 48 bytes for a key, but the real key size is
- * specified in the struct.  Currently, the code is hardcoded to use 128
- * bit keys.
- * The fields after salt are only valid in rev 1.1 and later stuctures.
- * Obviously, the filesystem does not include the last 16 kbytes
- * of the partition if the crypt_mnt_ftr lives at the end of the
- * partition.
- */
-
-#include <cutils/properties.h>
-
-/* The current cryptfs version */
-#define CURRENT_MAJOR_VERSION 1
-#define CURRENT_MINOR_VERSION 2
-
-#define CRYPT_FOOTER_OFFSET 0x4000
-#define CRYPT_FOOTER_TO_PERSIST_OFFSET 0x1000
-#define CRYPT_PERSIST_DATA_SIZE 0x1000
-
-#define MAX_CRYPTO_TYPE_NAME_LEN 64
-
-#define MAX_KEY_LEN 48
-#define SALT_LEN 16
-
-/* definitions of flags in the structure below */
-#define CRYPT_MNT_KEY_UNENCRYPTED 0x1 /* The key for the partition is not encrypted. */
-#define CRYPT_ENCRYPTION_IN_PROGRESS 0x2 /* Set when starting encryption,
-                                          * clear when done before rebooting */
-
-#define CRYPT_MNT_MAGIC 0xD0B5B1C4
-#define PERSIST_DATA_MAGIC 0xE950CD44
-
-#define SCRYPT_PROP "ro.crypto.scrypt_params"
-#define SCRYPT_DEFAULTS { 15, 3, 1 }
-
-/* Key Derivation Function algorithms */
-#define KDF_PBKDF2 1
-#define KDF_SCRYPT 2
-
-#define __le32 unsigned int
-#define __le16 unsigned short int
-#define __le8  unsigned char
-
-struct crypt_mnt_ftr {
-  __le32 magic;		/* See above */
-  __le16 major_version;
-  __le16 minor_version;
-  __le32 ftr_size; 	/* in bytes, not including key following */
-  __le32 flags;		/* See above */
-  __le32 keysize;	/* in bytes */
-  __le32 spare1;	/* ignored */
-  __le64 fs_size;	/* Size of the encrypted fs, in 512 byte sectors */
-  __le32 failed_decrypt_count; /* count of # of failed attempts to decrypt and
-				  mount, set to 0 on successful mount */
-  unsigned char crypto_type_name[MAX_CRYPTO_TYPE_NAME_LEN]; /* The type of encryption
-							       needed to decrypt this
-							       partition, null terminated */
-  __le32 spare2;        /* ignored */
-  unsigned char master_key[MAX_KEY_LEN]; /* The encrypted key for decrypting the filesystem */
-  unsigned char salt[SALT_LEN];   /* The salt used for this encryption */
-  __le64 persist_data_offset[2];  /* Absolute offset to both copies of crypt_persist_data
-                                   * on device with that info, either the footer of the
-                                   * real_blkdevice or the metadata partition. */
-
-  __le32 persist_data_size;       /* The number of bytes allocated to each copy of the
-                                   * persistent data table*/
-
-  __le8  kdf_type; /* The key derivation function used. */
-
-  /* scrypt parameters. See www.tarsnap.com/scrypt/scrypt.pdf */
-  __le8  N_factor; /* (1 << N) */
-  __le8  r_factor; /* (1 << r) */
-  __le8  p_factor; /* (1 << p) */
-};
-
-/* Persistant data that should be available before decryption.
- * Things like airplane mode, locale and timezone are kept
- * here and can be retrieved by the CryptKeeper UI to properly
- * configure the phone before asking for the password
- * This is only valid if the major and minor version above
- * is set to 1.1 or higher.
- *
- * This is a 4K structure.  There are 2 copies, and the code alternates
- * writing one and then clearing the previous one.  The reading
- * code reads the first valid copy it finds, based on the magic number.
- * The absolute offset to the first of the two copies is kept in rev 1.1
- * and higher crypt_mnt_ftr structures.
- */
-struct crypt_persist_entry {
-  char key[PROPERTY_KEY_MAX];
-  char val[PROPERTY_VALUE_MAX];
-};
-
-/* Should be exactly 4K in size */
-struct crypt_persist_data {
-  __le32 persist_magic;
-  __le32 persist_valid_entries;
-  __le32 persist_spare[30];
-  struct crypt_persist_entry persist_entry[0];
-};
-
-struct volume_info {
-   unsigned int size;
-   unsigned int flags;
-   struct crypt_mnt_ftr crypt_ftr;
-   char mnt_point[256];
-   char blk_dev[256];
-   char crypto_blkdev[256];
-   char label[256];
-};
-#define VOL_NONREMOVABLE   0x1
-#define VOL_ENCRYPTABLE    0x2
-#define VOL_PRIMARY        0x4
-#define VOL_PROVIDES_ASEC  0x8
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-  typedef void (*kdf_func)(char *passwd, unsigned char *salt, unsigned char *ikey, void *params);
-
-  int cryptfs_crypto_complete(void);
-  int cryptfs_check_footer(void);
-  int cryptfs_check_passwd(char *pw);
-  int cryptfs_verify_passwd(char *newpw);
-  int cryptfs_restart(void);
-  int cryptfs_enable(char *flag, char *passwd);
-  int cryptfs_changepw(char *newpw);
-  int cryptfs_setup_volume(const char *label, int major, int minor,
-                           char *crypto_dev_path, unsigned int max_pathlen,
-                           int *new_major, int *new_minor);
-  int cryptfs_revert_volume(const char *label);
-  int cryptfs_getfield(char *fieldname, char *value, int len);
-  int cryptfs_setfield(char *fieldname, char *value);
-#ifdef __cplusplus
-}
-#endif
-
diff --git a/crypto/libcrypt_samsung/Android.mk b/crypto/libcrypt_samsung/Android.mk
deleted file mode 100644
index 6e0e86903..000000000
--- a/crypto/libcrypt_samsung/Android.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-LOCAL_PATH := $(call my-dir)
-
-ifneq ($(TARGET_SIMULATOR),true)
-
-include $(CLEAR_VARS)
-LOCAL_MODULE := libcrypt_samsung
-LOCAL_SRC_FILES := $(LOCAL_MODULE).c
-LOCAL_MODULE_TAGS := eng
-include $(BUILD_STATIC_LIBRARY)
-
-endif
diff --git a/crypto/libcrypt_samsung/include/libcrypt_samsung.h b/crypto/libcrypt_samsung/include/libcrypt_samsung.h
deleted file mode 100644
index 2fb6f2c4f..000000000
--- a/crypto/libcrypt_samsung/include/libcrypt_samsung.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright (c) 2013 a3955269 all rights reversed, no rights reserved.
- */
-
-#ifndef __LIBCRYPT_SAMSUNG_H__
-#define __LIBCRYPT_SAMSUNG_H__
-
-//////////////////////////////////////////////////////////////////////////////
-// Name                           Address  Ordinal
-// ----                           -------  -------
-// SECKM_AES_set_encrypt_key      000010D8
-// SECKM_AES_set_decrypt_key      00001464
-// SECKM_AES_encrypt              00001600
-// SECKM_AES_decrypt              00001A10
-// SECKM_aes_selftest             00001D94
-// verify_EDK                     00001F7C
-// encrypt_dek                    00001FC8
-// decrypt_EDK                    000020D4
-// change_EDK                     0000218C
-// generate_dek_salt              000022A4
-// create_EDK                     000023A0
-// free_DEK                       000024DC
-// alloc_DEK                      000024F4
-// SECKM_HMAC_SHA256              00002500
-// SECKM_HMAC_SHA256_selftest     00002690
-// pbkdf                          000026FC
-// pbkdf_selftest                 00002898
-// _SECKM_PRNG_get16              00002958
-// SECKM_PRNG_get16               00002C48
-// _SECKM_PRNG_init               00002C54
-// SECKM_PRNG_selftest            00002F38
-// SECKM_PRNG_set_seed            00002FF0
-// SECKM_PRNG_init                00002FF8
-// SECKM_SHA256_Transform         00003004
-// SECKM_SHA256_Final             000031D8
-// SECKM_SHA256_Update            00003330
-// SECKM_SHA256_Init              000033FC
-// SECKM_SHA2_selftest            00003430
-// integrity_check                00003488
-// update_system_property         00003580
-// setsec_km_fips_status          00003630
-// _all_checks                    00003684
-// get_fips_status                000036D4
-
-
-// EDK Payload is defined as:
-//    Encrypted DEK – EDK itself
-//    HMAC of EDK (32 bytes ???)
-//    Salt         16 bytes
-
-#define EDK_MAGIC   0x1001e4b1
-
-#pragma pack(1)
-
-typedef struct {
-    unsigned int magic;     // EDK_MAGIC
-    unsigned int flags;     // 2
-    unsigned int zeros[6];
-} dek_t;
-
-typedef struct {
-    unsigned char data[32];
-} edk_t;
-
-
-// size 0x70 -> 112
-typedef struct {
-    dek_t dek;
-    edk_t edk;
-    unsigned char hmac[32];
-    unsigned char salt[16];
-} edk_payload_t;
-
-#pragma pack()
-
-//////////////////////////////////////////////////////////////////////////////
-
-int decrypt_EDK(
-        dek_t *dek, const edk_payload_t *edk, /*const*/ char *passwd);
-
-typedef int (*decrypt_EDK_t)(
-        dek_t *dek, const edk_payload_t *edk, /*const*/ char *passwd);
-
-
-int verify_EDK(const edk_payload_t *edk, const char *passwd);
-//change_EDK()
-//create_EDK()
-
-// internally just mallocs 32 bytes
-dek_t *alloc_DEK();
-void free_DEK(dek_t *dek);
-//encrypt_dek()
-//generate_dek_salt()
-
-//pbkdf(_buf_, "passwordPASSWORDpassword", 0x18, "saltSALTsaltSALTsaltSALTsaltSALTsalt", 0x24, 0x1000, 0x140);
-int pbkdf(
-        void *buf, void *pw, int pwlen, void *salt, int saltlen, int hashcnt,
-        int keylen);
-
-// getprop("rw.km_fips_status")
-// "ready, undefined, error_selftest, error_integrity"
-int get_fips_status();
-
-//////////////////////////////////////////////////////////////////////////////
-//
-// libsec_ecryptfs.so (internally uses libkeyutils.so)
-//
-// Name                   Address  Ordinal
-// ----                   -------  -------
-// unmount_ecryptfs_drive 00000A78
-// mount_ecryptfs_drive   00000B48
-// fips_read_edk          00000E44
-// fips_save_edk          00000EA4
-// fips_create_edk        00000F20
-// fips_change_password   00001018
-// fips_delete_edk        00001124
-//
-
-// might depend on /data beeing mounted for reading /data/system/edk_p_sd
-//
-// filter
-// 0: building options without file encryption filtering.
-// 1: building options with media files filtering.
-// 2: building options with all new files filtering.
-
-int mount_ecryptfs_drive(
-        const char *passwd, const char *source, const char *target, int filter);
-
-typedef int (*mount_ecryptfs_drive_t)(
-        const char *passwd, const char *source, const char *target, int filter);
-
-// calls 2 times umount2(source, MNT_EXPIRE)
-int unmount_ecryptfs_drive(
-        const char *source);
-
-typedef int (*unmount_ecryptfs_drive_t)(
-        const char *source);
-
-//////////////////////////////////////////////////////////////////////////////
-
-#endif // #ifndef __LIBCRYPT_SAMSUNG_H__
-
-//////////////////////////////////////////////////////////////////////////////
-
diff --git a/crypto/libcrypt_samsung/libcrypt_samsung.c b/crypto/libcrypt_samsung/libcrypt_samsung.c
deleted file mode 100644
index cd3a17804..000000000
--- a/crypto/libcrypt_samsung/libcrypt_samsung.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (c) 2013 a3955269 all rights reversed, no rights reserved.
- */
-
-//////////////////////////////////////////////////////////////////////////////
-
-#include <string.h>
-#include <stdio.h>
-#include <dlfcn.h>
-
-#include "include/libcrypt_samsung.h"
-
-//////////////////////////////////////////////////////////////////////////////
-
-int decrypt_EDK(
-        dek_t *dek, const edk_payload_t *edk, /*const*/ char *passwd)
-{
-    void *lib = dlopen("libsec_km.so", RTLD_LAZY);
-
-    if(!lib)
-        return -100;
-
-    int r = -101;
-    decrypt_EDK_t sym = (decrypt_EDK_t)dlsym(lib, "decrypt_EDK");
-    if(sym)
-        r = sym(dek, edk, passwd);
-
-    dlclose(lib);
-
-    return r;
-}
-
-int mount_ecryptfs_drive(
-        const char *passwd, const char *source, const char *target, int filter)
-{
-    void *lib = dlopen("libsec_ecryptfs.so", RTLD_LAZY);
-    if(!lib)
-        return -100;
-
-    int r = -101;
-    mount_ecryptfs_drive_t sym = (mount_ecryptfs_drive_t)dlsym(lib, "mount_ecryptfs_drive");
-    if(sym)
-        r = sym(passwd, source, target, filter);
-
-    dlclose(lib);
-
-    return r;
-}
-
-int unmount_ecryptfs_drive(
-        const char *source)
-{
-    void *lib = dlopen("libsec_ecryptfs.so", RTLD_LAZY);
-    if(!lib)
-        return -100;
-
-    int r = -101;
-    unmount_ecryptfs_drive_t sym = (unmount_ecryptfs_drive_t)dlsym(lib, "unmount_ecryptfs_drive");
-    if(sym)
-        r = sym(source);
-
-    dlclose(lib);
-
-    return r;
-}
\ No newline at end of file
diff --git a/crypto/logwrapper/Android.mk b/crypto/logwrapper/Android.mk
deleted file mode 100644
index 01b61930d..000000000
--- a/crypto/logwrapper/Android.mk
+++ /dev/null
@@ -1,34 +0,0 @@
-LOCAL_PATH:= $(call my-dir)
-
-include $(CLEAR_VARS)
-
-# ========================================================
-# Static library
-# ========================================================
-include $(CLEAR_VARS)
-LOCAL_MODULE := liblogwraptwrp
-LOCAL_SRC_FILES := logwrap.c
-LOCAL_SHARED_LIBRARIES := libcutils liblog
-LOCAL_EXPORT_C_INCLUDE_DIRS := $(LOCAL_PATH)/include
-LOCAL_C_INCLUDES := $(LOCAL_PATH)/include
-include $(BUILD_STATIC_LIBRARY)
-
-# ========================================================
-# Shared library
-# ========================================================
-#include $(CLEAR_VARS)
-#LOCAL_MODULE := liblogwrap
-#LOCAL_SHARED_LIBRARIES := libcutils liblog
-#LOCAL_WHOLE_STATIC_LIBRARIES := liblogwrap
-#LOCAL_EXPORT_C_INCLUDE_DIRS := $(LOCAL_PATH)/include
-#LOCAL_C_INCLUDES := $(LOCAL_PATH)/include
-#include $(BUILD_SHARED_LIBRARY)
-
-# ========================================================
-# Executable
-# ========================================================
-#include $(CLEAR_VARS)
-#LOCAL_SRC_FILES:= logwrapper.c
-#LOCAL_MODULE := logwrapper
-#LOCAL_STATIC_LIBRARIES := liblog liblogwrap libcutils
-#include $(BUILD_EXECUTABLE)
diff --git a/crypto/logwrapper/NOTICE b/crypto/logwrapper/NOTICE
deleted file mode 100644
index c5b1efa7a..000000000
--- a/crypto/logwrapper/NOTICE
+++ /dev/null
@@ -1,190 +0,0 @@
-
-   Copyright (c) 2005-2008, The Android Open Source Project
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.
-
-
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
-
diff --git a/crypto/logwrapper/include/logwrap/logwrap.h b/crypto/logwrapper/include/logwrap/logwrap.h
deleted file mode 100644
index 4307a3055..000000000
--- a/crypto/logwrapper/include/logwrap/logwrap.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* system/core/include/logwrap/logwrap.h
- *
- * Copyright 2013, The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __LIBS_LOGWRAP_H
-#define __LIBS_LOGWRAP_H
-
-#include <stdbool.h>
-
-__BEGIN_DECLS
-
-/*
- * Run a command while logging its stdout and stderr
- *
- * WARNING: while this function is running it will clear all SIGCHLD handlers
- * if you rely on SIGCHLD in the caller there is a chance zombies will be
- * created if you're not calling waitpid after calling this. This function will
- * log a warning when it clears SIGCHLD for processes other than the child it
- * created.
- *
- * Arguments:
- *   argc:   the number of elements in argv
- *   argv:   an array of strings containing the command to be executed and its
- *           arguments as separate strings. argv does not need to be
- *           NULL-terminated
- *   status: the equivalent child status as populated by wait(status). This
- *           value is only valid when logwrap successfully completes. If NULL
- *           the return value of the child will be the function's return value.
- *   ignore_int_quit: set to true if you want to completely ignore SIGINT and
- *           SIGQUIT while logwrap is running. This may force the end-user to
- *           send a signal twice to signal the caller (once for the child, and
- *           once for the caller)
- *   log_target: Specify where to log the output of the child, either LOG_NONE,
- *           LOG_ALOG (for the Android system log), LOG_KLOG (for the kernel
- *           log), or LOG_FILE (and you need to specify a pathname in the
- *           file_path argument, otherwise pass NULL).  These are bit fields,
- *           and can be OR'ed together to log to multiple places.
- *   abbreviated: If true, capture up to the first 100 lines and last 4K of
- *           output from the child.  The abbreviated output is not dumped to
- *           the specified log until the child has exited.
- *   file_path: if log_target has the LOG_FILE bit set, then this parameter
- *           must be set to the pathname of the file to log to.
- *
- * Return value:
- *   0 when logwrap successfully run the child process and captured its status
- *   -1 when an internal error occurred
- *   -ECHILD if status is NULL and the child didn't exit properly
- *   the return value of the child if it exited properly and status is NULL
- *
- */
-
-/* Values for the log_target parameter android_fork_execvp_ext() */
-#define LOG_NONE        0
-#define LOG_ALOG        1
-#define LOG_KLOG        2
-#define LOG_FILE        4
-
-int android_fork_execvp_ext(int argc, char* argv[], int *status, bool ignore_int_quit,
-        int log_target, bool abbreviated, char *file_path);
-
-/* Similar to above, except abbreviated logging is not available, and if logwrap
- * is true, logging is to the Android system log, and if false, there is no
- * logging.
- */
-static inline int android_fork_execvp(int argc, char* argv[], int *status,
-                                     bool ignore_int_quit, bool logwrap)
-{
-    return android_fork_execvp_ext(argc, argv, status, ignore_int_quit,
-                                   (logwrap ? LOG_ALOG : LOG_NONE), false, NULL);
-}
-
-__END_DECLS
-
-#endif /* __LIBS_LOGWRAP_H */
diff --git a/crypto/logwrapper/logwrap.c b/crypto/logwrapper/logwrap.c
deleted file mode 100644
index 4ca1db4c8..000000000
--- a/crypto/logwrapper/logwrap.c
+++ /dev/null
@@ -1,569 +0,0 @@
-/*
- * Copyright (C) 2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <poll.h>
-#include <sys/wait.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <libgen.h>
-#include <stdbool.h>
-#include <pthread.h>
-
-#include <logwrap/logwrap.h>
-#include "private/android_filesystem_config.h"
-#include "cutils/log.h"
-#include <cutils/klog.h>
-
-#define ARRAY_SIZE(x)   (sizeof(x) / sizeof(*(x)))
-#define MIN(a,b) (((a)<(b))?(a):(b))
-
-static pthread_mutex_t fd_mutex = PTHREAD_MUTEX_INITIALIZER;
-
-#define ERROR(fmt, args...)                                                   \
-do {                                                                          \
-    fprintf(stderr, fmt, ## args);                                            \
-    ALOG(LOG_ERROR, "logwrapper", fmt, ## args);                              \
-} while(0)
-
-#define FATAL_CHILD(fmt, args...)                                             \
-do {                                                                          \
-    ERROR(fmt, ## args);                                                      \
-    _exit(-1);                                                                \
-} while(0)
-
-#define MAX_KLOG_TAG 16
-
-/* This is a simple buffer that holds up to the first beginning_buf->buf_size
- * bytes of output from a command.
- */
-#define BEGINNING_BUF_SIZE 0x1000
-struct beginning_buf {
-    char *buf;
-    size_t alloc_len;
-    /* buf_size is the usable space, which is one less than the allocated size */
-    size_t buf_size;
-    size_t used_len;
-};
-
-/* This is a circular buf that holds up to the last ending_buf->buf_size bytes
- * of output from a command after the first beginning_buf->buf_size bytes
- * (which are held in beginning_buf above).
- */
-#define ENDING_BUF_SIZE 0x1000
-struct ending_buf {
-    char *buf;
-    ssize_t alloc_len;
-    /* buf_size is the usable space, which is one less than the allocated size */
-    ssize_t buf_size;
-    ssize_t used_len;
-    /* read and write offsets into the circular buffer */
-    int read;
-    int write;
-};
-
- /* A structure to hold all the abbreviated buf data */
-struct abbr_buf {
-    struct beginning_buf b_buf;
-    struct ending_buf e_buf;
-    int beginning_buf_full;
-};
-
-/* Collect all the various bits of info needed for logging in one place. */
-struct log_info {
-    int log_target;
-    char klog_fmt[MAX_KLOG_TAG * 2];
-    char *btag;
-    bool abbreviated;
-    FILE *fp;
-    struct abbr_buf a_buf;
-};
-
-/* Forware declaration */
-static void add_line_to_abbr_buf(struct abbr_buf *a_buf, char *linebuf, int linelen);
-
-/* Return 0 on success, and 1 when full */
-static int add_line_to_linear_buf(struct beginning_buf *b_buf,
-                                   char *line, ssize_t line_len)
-{
-    size_t new_len;
-    char *new_buf;
-    int full = 0;
-
-    if ((line_len + b_buf->used_len) > b_buf->buf_size) {
-        full = 1;
-    } else {
-        /* Add to the end of the buf */
-        memcpy(b_buf->buf + b_buf->used_len, line, line_len);
-        b_buf->used_len += line_len;
-    }
-
-    return full;
-}
-
-static void add_line_to_circular_buf(struct ending_buf *e_buf,
-                                     char *line, ssize_t line_len)
-{
-    ssize_t free_len;
-    ssize_t needed_space;
-    char *new_buf;
-    int cnt;
-
-    if (e_buf->buf == NULL) {
-        return;
-    }
-
-   if (line_len > e_buf->buf_size) {
-       return;
-   }
-
-    free_len = e_buf->buf_size - e_buf->used_len;
-
-    if (line_len > free_len) {
-        /* remove oldest entries at read, and move read to make
-         * room for the new string */
-        needed_space = line_len - free_len;
-        e_buf->read = (e_buf->read + needed_space) % e_buf->buf_size;
-        e_buf->used_len -= needed_space;
-    }
-
-    /* Copy the line into the circular buffer, dealing with possible
-     * wraparound.
-     */
-    cnt = MIN(line_len, e_buf->buf_size - e_buf->write);
-    memcpy(e_buf->buf + e_buf->write, line, cnt);
-    if (cnt < line_len) {
-        memcpy(e_buf->buf, line + cnt, line_len - cnt);
-    }
-    e_buf->used_len += line_len;
-    e_buf->write = (e_buf->write + line_len) % e_buf->buf_size;
-}
-
-/* Log directly to the specified log */
-static void do_log_line(struct log_info *log_info, char *line) {
-    if (log_info->log_target & LOG_KLOG) {
-        klog_write(6, log_info->klog_fmt, line);
-    }
-    if (log_info->log_target & LOG_ALOG) {
-        ALOG(LOG_INFO, log_info->btag, "%s", line);
-    }
-    if (log_info->log_target & LOG_FILE) {
-        fprintf(log_info->fp, "%s\n", line);
-    }
-}
-
-/* Log to either the abbreviated buf, or directly to the specified log
- * via do_log_line() above.
- */
-static void log_line(struct log_info *log_info, char *line, int len) {
-    if (log_info->abbreviated) {
-        add_line_to_abbr_buf(&log_info->a_buf, line, len);
-    } else {
-        do_log_line(log_info, line);
-    }
-}
-
-/*
- * The kernel will take a maximum of 1024 bytes in any single write to
- * the kernel logging device file, so find and print each line one at
- * a time.  The allocated size for buf should be at least 1 byte larger
- * than buf_size (the usable size of the buffer) to make sure there is
- * room to temporarily stuff a null byte to terminate a line for logging.
- */
-static void print_buf_lines(struct log_info *log_info, char *buf, int buf_size)
-{
-    char *line_start;
-    char c;
-    int line_len;
-    int i;
-
-    line_start = buf;
-    for (i = 0; i < buf_size; i++) {
-        if (*(buf + i) == '\n') {
-            /* Found a line ending, print the line and compute new line_start */
-            /* Save the next char and replace with \0 */
-            c = *(buf + i + 1);
-            *(buf + i + 1) = '\0';
-            do_log_line(log_info, line_start);
-            /* Restore the saved char */
-            *(buf + i + 1) = c;
-            line_start = buf + i + 1;
-        } else if (*(buf + i) == '\0') {
-            /* The end of the buffer, print the last bit */
-            do_log_line(log_info, line_start);
-            break;
-        }
-    }
-    /* If the buffer was completely full, and didn't end with a newline, just
-     * ignore the partial last line.
-     */
-}
-
-static void init_abbr_buf(struct abbr_buf *a_buf) {
-    char *new_buf;
-
-    memset(a_buf, 0, sizeof(struct abbr_buf));
-    new_buf = malloc(BEGINNING_BUF_SIZE);
-    if (new_buf) {
-        a_buf->b_buf.buf = new_buf;
-        a_buf->b_buf.alloc_len = BEGINNING_BUF_SIZE;
-        a_buf->b_buf.buf_size = BEGINNING_BUF_SIZE - 1;
-    }
-    new_buf = malloc(ENDING_BUF_SIZE);
-    if (new_buf) {
-        a_buf->e_buf.buf = new_buf;
-        a_buf->e_buf.alloc_len = ENDING_BUF_SIZE;
-        a_buf->e_buf.buf_size = ENDING_BUF_SIZE - 1;
-    }
-}
-
-static void free_abbr_buf(struct abbr_buf *a_buf) {
-    free(a_buf->b_buf.buf);
-    free(a_buf->e_buf.buf);
-}
-
-static void add_line_to_abbr_buf(struct abbr_buf *a_buf, char *linebuf, int linelen) {
-    if (!a_buf->beginning_buf_full) {
-        a_buf->beginning_buf_full =
-            add_line_to_linear_buf(&a_buf->b_buf, linebuf, linelen);
-    }
-    if (a_buf->beginning_buf_full) {
-        add_line_to_circular_buf(&a_buf->e_buf, linebuf, linelen);
-    }
-}
-
-static void print_abbr_buf(struct log_info *log_info) {
-    struct abbr_buf *a_buf = &log_info->a_buf;
-
-    /* Add the abbreviated output to the kernel log */
-    if (a_buf->b_buf.alloc_len) {
-        print_buf_lines(log_info, a_buf->b_buf.buf, a_buf->b_buf.used_len);
-    }
-
-    /* Print an ellipsis to indicate that the buffer has wrapped or
-     * is full, and some data was not logged.
-     */
-    if (a_buf->e_buf.used_len == a_buf->e_buf.buf_size) {
-        do_log_line(log_info, "...\n");
-    }
-
-    if (a_buf->e_buf.used_len == 0) {
-        return;
-    }
-
-    /* Simplest way to print the circular buffer is allocate a second buf
-     * of the same size, and memcpy it so it's a simple linear buffer,
-     * and then cal print_buf_lines on it */
-    if (a_buf->e_buf.read < a_buf->e_buf.write) {
-        /* no wrap around, just print it */
-        print_buf_lines(log_info, a_buf->e_buf.buf + a_buf->e_buf.read,
-                        a_buf->e_buf.used_len);
-    } else {
-        /* The circular buffer will always have at least 1 byte unused,
-         * so by allocating alloc_len here we will have at least
-         * 1 byte of space available as required by print_buf_lines().
-         */
-        char * nbuf = malloc(a_buf->e_buf.alloc_len);
-        if (!nbuf) {
-            return;
-        }
-        int first_chunk_len = a_buf->e_buf.buf_size - a_buf->e_buf.read;
-        memcpy(nbuf, a_buf->e_buf.buf + a_buf->e_buf.read, first_chunk_len);
-        /* copy second chunk */
-        memcpy(nbuf + first_chunk_len, a_buf->e_buf.buf, a_buf->e_buf.write);
-        print_buf_lines(log_info, nbuf, first_chunk_len + a_buf->e_buf.write);
-        free(nbuf);
-    }
-}
-
-static int parent(const char *tag, int parent_read, pid_t pid,
-        int *chld_sts, int log_target, bool abbreviated, char *file_path) {
-    int status = 0;
-    char buffer[4096];
-    struct pollfd poll_fds[] = {
-        [0] = {
-            .fd = parent_read,
-            .events = POLLIN,
-        },
-    };
-    int rc = 0;
-    int fd;
-
-    struct log_info log_info;
-
-    int a = 0;  // start index of unprocessed data
-    int b = 0;  // end index of unprocessed data
-    int sz;
-    bool found_child = false;
-    char tmpbuf[256];
-
-    log_info.btag = basename(tag);
-    if (!log_info.btag) {
-        log_info.btag = (char*) tag;
-    }
-
-    if (abbreviated && (log_target == LOG_NONE)) {
-        abbreviated = 0;
-    }
-    if (abbreviated) {
-        init_abbr_buf(&log_info.a_buf);
-    }
-
-    if (log_target & LOG_KLOG) {
-        snprintf(log_info.klog_fmt, sizeof(log_info.klog_fmt),
-                 "<6>%.*s: %%s", MAX_KLOG_TAG, log_info.btag);
-    }
-
-    if ((log_target & LOG_FILE) && !file_path) {
-        /* No file_path specified, clear the LOG_FILE bit */
-        log_target &= ~LOG_FILE;
-    }
-
-    if (log_target & LOG_FILE) {
-        fd = open(file_path, O_WRONLY | O_CREAT, 0664);
-        if (fd < 0) {
-            ERROR("Cannot log to file %s\n", file_path);
-            log_target &= ~LOG_FILE;
-        } else {
-            lseek(fd, 0, SEEK_END);
-            log_info.fp = fdopen(fd, "a");
-        }
-    }
-
-    log_info.log_target = log_target;
-    log_info.abbreviated = abbreviated;
-
-    while (!found_child) {
-        if (TEMP_FAILURE_RETRY(poll(poll_fds, ARRAY_SIZE(poll_fds), -1)) < 0) {
-            ERROR("poll failed\n");
-            rc = -1;
-            goto err_poll;
-        }
-
-        if (poll_fds[0].revents & POLLIN) {
-            sz = read(parent_read, &buffer[b], sizeof(buffer) - 1 - b);
-
-            sz += b;
-            // Log one line at a time
-            for (b = 0; b < sz; b++) {
-                if (buffer[b] == '\r') {
-                    if (abbreviated) {
-                        /* The abbreviated logging code uses newline as
-                         * the line separator.  Lucikly, the pty layer
-                         * helpfully cooks the output of the command
-                         * being run and inserts a CR before NL.  So
-                         * I just change it to NL here when doing
-                         * abbreviated logging.
-                         */
-                        buffer[b] = '\n';
-                    } else {
-                        buffer[b] = '\0';
-                    }
-                } else if (buffer[b] == '\n') {
-                    buffer[b] = '\0';
-                    log_line(&log_info, &buffer[a], b - a);
-                    a = b + 1;
-                }
-            }
-
-            if (a == 0 && b == sizeof(buffer) - 1) {
-                // buffer is full, flush
-                buffer[b] = '\0';
-                log_line(&log_info, &buffer[a], b - a);
-                b = 0;
-            } else if (a != b) {
-                // Keep left-overs
-                b -= a;
-                memmove(buffer, &buffer[a], b);
-                a = 0;
-            } else {
-                a = 0;
-                b = 0;
-            }
-        }
-
-        if (poll_fds[0].revents & POLLHUP) {
-            int ret;
-
-            ret = waitpid(pid, &status, WNOHANG);
-            if (ret < 0) {
-                rc = errno;
-                ALOG(LOG_ERROR, "logwrap", "waitpid failed with %s\n", strerror(errno));
-                goto err_waitpid;
-            }
-            if (ret > 0) {
-                found_child = true;
-            }
-        }
-    }
-
-    if (chld_sts != NULL) {
-        *chld_sts = status;
-    } else {
-      if (WIFEXITED(status))
-        rc = WEXITSTATUS(status);
-      else
-        rc = -ECHILD;
-    }
-
-    // Flush remaining data
-    if (a != b) {
-      buffer[b] = '\0';
-      log_line(&log_info, &buffer[a], b - a);
-    }
-
-    /* All the output has been processed, time to dump the abbreviated output */
-    if (abbreviated) {
-        print_abbr_buf(&log_info);
-    }
-
-    if (WIFEXITED(status)) {
-      if (WEXITSTATUS(status)) {
-        snprintf(tmpbuf, sizeof(tmpbuf),
-                 "%s terminated by exit(%d)\n", log_info.btag, WEXITSTATUS(status));
-        do_log_line(&log_info, tmpbuf);
-      }
-    } else {
-      if (WIFSIGNALED(status)) {
-        snprintf(tmpbuf, sizeof(tmpbuf),
-                       "%s terminated by signal %d\n", log_info.btag, WTERMSIG(status));
-        do_log_line(&log_info, tmpbuf);
-      } else if (WIFSTOPPED(status)) {
-        snprintf(tmpbuf, sizeof(tmpbuf),
-                       "%s stopped by signal %d\n", log_info.btag, WSTOPSIG(status));
-        do_log_line(&log_info, tmpbuf);
-      }
-    }
-
-err_waitpid:
-err_poll:
-    if (log_target & LOG_FILE) {
-        fclose(log_info.fp); /* Also closes underlying fd */
-    }
-    if (abbreviated) {
-        free_abbr_buf(&log_info.a_buf);
-    }
-    return rc;
-}
-
-static void child(int argc, char* argv[]) {
-    // create null terminated argv_child array
-    char* argv_child[argc + 1];
-    memcpy(argv_child, argv, argc * sizeof(char *));
-    argv_child[argc] = NULL;
-
-    if (execvp(argv_child[0], argv_child)) {
-        FATAL_CHILD("executing %s failed: %s\n", argv_child[0],
-                strerror(errno));
-    }
-}
-
-int android_fork_execvp_ext(int argc, char* argv[], int *status, bool ignore_int_quit,
-        int log_target, bool abbreviated, char *file_path) {
-    pid_t pid;
-    int parent_ptty;
-    int child_ptty;
-    char *child_devname = NULL;
-    struct sigaction intact;
-    struct sigaction quitact;
-    sigset_t blockset;
-    sigset_t oldset;
-    int rc = 0;
-
-    rc = pthread_mutex_lock(&fd_mutex);
-    if (rc) {
-        ERROR("failed to lock signal_fd mutex\n");
-        goto err_lock;
-    }
-
-    /* Use ptty instead of socketpair so that STDOUT is not buffered */
-    parent_ptty = open("/dev/ptmx", O_RDWR);
-    if (parent_ptty < 0) {
-        ERROR("Cannot create parent ptty\n");
-        rc = -1;
-        goto err_open;
-    }
-
-    if (grantpt(parent_ptty) || unlockpt(parent_ptty) ||
-            ((child_devname = (char*)ptsname(parent_ptty)) == 0)) {
-        ERROR("Problem with /dev/ptmx\n");
-        rc = -1;
-        goto err_ptty;
-    }
-
-    child_ptty = open(child_devname, O_RDWR);
-    if (child_ptty < 0) {
-        ERROR("Cannot open child_ptty\n");
-        rc = -1;
-        goto err_child_ptty;
-    }
-
-    sigemptyset(&blockset);
-    sigaddset(&blockset, SIGINT);
-    sigaddset(&blockset, SIGQUIT);
-    pthread_sigmask(SIG_BLOCK, &blockset, &oldset);
-
-    pid = fork();
-    if (pid < 0) {
-        close(child_ptty);
-        ERROR("Failed to fork\n");
-        rc = -1;
-        goto err_fork;
-    } else if (pid == 0) {
-        pthread_mutex_unlock(&fd_mutex);
-        pthread_sigmask(SIG_SETMASK, &oldset, NULL);
-        close(parent_ptty);
-
-        // redirect stdout and stderr
-        dup2(child_ptty, 1);
-        dup2(child_ptty, 2);
-        close(child_ptty);
-
-        child(argc, argv);
-    } else {
-        close(child_ptty);
-        if (ignore_int_quit) {
-            struct sigaction ignact;
-
-            memset(&ignact, 0, sizeof(ignact));
-            ignact.sa_handler = SIG_IGN;
-            sigaction(SIGINT, &ignact, &intact);
-            sigaction(SIGQUIT, &ignact, &quitact);
-        }
-
-        rc = parent(argv[0], parent_ptty, pid, status, log_target,
-                    abbreviated, file_path);
-    }
-
-    if (ignore_int_quit) {
-        sigaction(SIGINT, &intact, NULL);
-        sigaction(SIGQUIT, &quitact, NULL);
-    }
-err_fork:
-    pthread_sigmask(SIG_SETMASK, &oldset, NULL);
-err_child_ptty:
-err_ptty:
-    close(parent_ptty);
-err_open:
-    pthread_mutex_unlock(&fd_mutex);
-err_lock:
-    return rc;
-}
diff --git a/crypto/logwrapper/logwrapper.c b/crypto/logwrapper/logwrapper.c
deleted file mode 100644
index d0d8d1471..000000000
--- a/crypto/logwrapper/logwrapper.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) 2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <sys/wait.h>
-#include <unistd.h>
-
-#include <logwrap/logwrap.h>
-#include <cutils/klog.h>
-
-#include "cutils/log.h"
-
-void fatal(const char *msg) {
-    fprintf(stderr, "%s", msg);
-    ALOG(LOG_ERROR, "logwrapper", "%s", msg);
-    exit(-1);
-}
-
-void usage() {
-    fatal(
-        "Usage: logwrapper [-a] [-d] [-k] BINARY [ARGS ...]\n"
-        "\n"
-        "Forks and executes BINARY ARGS, redirecting stdout and stderr to\n"
-        "the Android logging system. Tag is set to BINARY, priority is\n"
-        "always LOG_INFO.\n"
-        "\n"
-        "-a: Causes logwrapper to do abbreviated logging.\n"
-        "    This logs up to the first 4K and last 4K of the command\n"
-        "    being run, and logs the output when the command exits\n"
-        "-d: Causes logwrapper to SIGSEGV when BINARY terminates\n"
-        "    fault address is set to the status of wait()\n"
-        "-k: Causes logwrapper to log to the kernel log instead of\n"
-        "    the Android system log\n");
-}
-
-int main(int argc, char* argv[]) {
-    int seg_fault_on_exit = 0;
-    int log_target = LOG_ALOG;
-    bool abbreviated = false;
-    int ch;
-    int status = 0xAAAA;
-    int rc;
-
-    while ((ch = getopt(argc, argv, "adk")) != -1) {
-        switch (ch) {
-            case 'a':
-                abbreviated = true;
-                break;
-            case 'd':
-                seg_fault_on_exit = 1;
-                break;
-            case 'k':
-                log_target = LOG_KLOG;
-                klog_set_level(6);
-                break;
-            case '?':
-            default:
-              usage();
-        }
-    }
-    argc -= optind;
-    argv += optind;
-
-    if (argc < 1) {
-        usage();
-    }
-
-    rc = android_fork_execvp_ext(argc, &argv[0], &status, true,
-                                 log_target, abbreviated, NULL);
-    if (!rc) {
-        if (WIFEXITED(status))
-            rc = WEXITSTATUS(status);
-        else
-            rc = -ECHILD;
-    }
-
-    if (seg_fault_on_exit) {
-        *(int *)status = 0;  // causes SIGSEGV with fault_address = status
-    }
-
-    return rc;
-}
diff --git a/crypto/lollipop/Android.mk b/crypto/lollipop/Android.mk
index 40b4d5f95..da25eac30 100644
--- a/crypto/lollipop/Android.mk
+++ b/crypto/lollipop/Android.mk
@@ -21,16 +21,17 @@ common_shared_libraries := \
 	libcutils \
 	liblog \
 	libdiskconfig \
-	libhardware_legacy \
 	liblogwrap \
 	libext4_utils \
 	libf2fs_sparseblock \
 	libcrypto \
 	libselinux \
 	libutils \
-	libhardware \
+	libminhardware \
 	libsoftkeymaster
 
+common_shared_libraries := libcrypto libselinux libhardware libsoftkeymaster libcutils
+
 LOCAL_MODULE := libcryptfslollipop
 LOCAL_MODULE_TAGS := eng optional
 LOCAL_CFLAGS :=
@@ -44,9 +45,26 @@ LOCAL_SRC_FILES = cryptfs.c
 #    hardware/libhardware/include/hardware \
 #	system/security/softkeymaster/include/keymaster
 #LOCAL_SHARED_LIBRARIES += libc liblog libcutils libcrypto libext4_utils
-LOCAL_SHARED_LIBRARIES := $(common_shared_libraries) libmincrypttwrp liblogwrap
+LOCAL_SHARED_LIBRARIES := $(common_shared_libraries) libmincrypttwrp
 LOCAL_C_INCLUDES := external/openssl/include $(common_c_includes)
-LOCAL_WHOLE_STATIC_LIBRARIES += libfs_mgr libscrypt_static
+LOCAL_WHOLE_STATIC_LIBRARIES += libscrypttwrp_static
+
+include $(BUILD_SHARED_LIBRARY)
+
+include $(CLEAR_VARS)
+
+LOCAL_SHARED_LIBRARIES := libcutils liblog
+
+LOCAL_INCLUDES += $(LOCAL_PATH) $(LOCAL_PATH)\libminhardware
+
+LOCAL_CFLAGS  += -DQEMU_HARDWARE
+QEMU_HARDWARE := true
+
+LOCAL_SHARED_LIBRARIES += libdl
+
+LOCAL_SRC_FILES += libminhardware/hardware.c
+
+LOCAL_MODULE:= libminhardware
 
 include $(BUILD_SHARED_LIBRARY)
 endif
diff --git a/crypto/lollipop/cryptfs.c b/crypto/lollipop/cryptfs.c
index 0277c78ef..90f1523d3 100644
--- a/crypto/lollipop/cryptfs.c
+++ b/crypto/lollipop/cryptfs.c
@@ -37,27 +37,17 @@
 #include <sys/mount.h>
 #include <openssl/evp.h>
 #include <errno.h>
-#include <ext4.h>
 #include <linux/kdev_t.h>
-#include <fs_mgr.h>
 #include <time.h>
 #include "cryptfs.h"
-#define LOG_TAG "Cryptfs"
-#include "cutils/log.h"
 #include "cutils/properties.h"
-#include "cutils/android_reboot.h"
-#include "hardware_legacy/power.h"
-#include <logwrap/logwrap.h>
-//#include "VolumeManager.h"
-//#include "VoldUtil.h"
 #include "crypto_scrypt.h"
-#include "ext4_utils.h"
-#include "f2fs_sparseblock.h"
-//#include "CheckBattery.h"
-//#include "Process.h"
-
 #include <hardware/keymaster.h>
 
+#ifndef min /* already defined by windows.h */
+#define min(a, b) ((a) < (b) ? (a) : (b))
+#endif
+
 #define UNUSED __attribute__((unused))
 
 #define UNUSED __attribute__((unused))
@@ -91,6 +81,16 @@ static unsigned char saved_master_key[KEY_LEN_BYTES];
 static char *saved_mount_point;
 static int  master_key_saved = 0;
 static struct crypt_persist_data *persist_data = NULL;
+static char key_fname[PROPERTY_VALUE_MAX] = "";
+static char real_blkdev[PROPERTY_VALUE_MAX] = "";
+static char file_system[PROPERTY_VALUE_MAX] = "";
+
+void set_partition_data(const char* block_device, const char* key_location, const char* fs)
+{
+  strcpy(key_fname, key_location);
+  strcpy(real_blkdev, block_device);
+  strcpy(file_system, fs);
+}
 
 static int keymaster_init(keymaster_device_t **keymaster_dev)
 {
@@ -291,31 +291,6 @@ static char* password = 0;
 static int password_expiry_time = 0;
 static const int password_max_age_seconds = 60;
 
-struct fstab *fstab;
-
-enum RebootType {reboot, recovery, shutdown};
-static void cryptfs_reboot(enum RebootType rt)
-{
-  switch(rt) {
-      case reboot:
-          property_set(ANDROID_RB_PROPERTY, "reboot");
-          break;
-
-      case recovery:
-          property_set(ANDROID_RB_PROPERTY, "reboot,recovery");
-          break;
-
-      case shutdown:
-          property_set(ANDROID_RB_PROPERTY, "shutdown");
-          break;
-    }
-
-    sleep(20);
-
-    /* Shouldn't get here, reboot should happen before sleep times out */
-    return;
-}
-
 static void ioctl_init(struct dm_ioctl *io, size_t dataSize, const char *name, unsigned flags)
 {
     memset(io, 0, dataSize);
@@ -380,41 +355,6 @@ static void get_device_scrypt_params(struct crypt_mnt_ftr *ftr) {
     ftr->p_factor = params[2];
 }
 
-static unsigned int get_fs_size(char *dev)
-{
-    int fd, block_size;
-    struct ext4_super_block sb;
-    off64_t len;
-
-    if ((fd = open(dev, O_RDONLY)) < 0) {
-        printf("Cannot open device to get filesystem size ");
-        return 0;
-    }
-
-    if (lseek64(fd, 1024, SEEK_SET) < 0) {
-        printf("Cannot seek to superblock");
-        return 0;
-    }
-
-    if (read(fd, &sb, sizeof(sb)) != sizeof(sb)) {
-        printf("Cannot read superblock");
-        return 0;
-    }
-
-    close(fd);
-
-    if (le32_to_cpu(sb.s_magic) != EXT4_SUPER_MAGIC) {
-        printf("Not a valid ext4 superblock");
-        return 0;
-    }
-    block_size = 1024 << sb.s_log_block_size;
-    /* compute length in bytes */
-    len = ( ((off64_t)sb.s_blocks_count_hi << 32) + sb.s_blocks_count_lo) * block_size;
-
-    /* return length in sectors */
-    return (unsigned int) (len / 512);
-}
-
 static unsigned int get_blkdev_size(int fd)
 {
   unsigned int nr_sec;
@@ -432,15 +372,12 @@ static int get_crypt_ftr_info(char **metadata_fname, off64_t *off)
   static off64_t cached_off = 0;
   static char cached_metadata_fname[PROPERTY_VALUE_MAX] = "";
   int fd;
-  char key_loc[PROPERTY_VALUE_MAX];
-  char real_blkdev[PROPERTY_VALUE_MAX];
   unsigned int nr_sec;
   int rc = -1;
 
   if (!cached_data) {
-    fs_mgr_get_crypt_info(fstab, key_loc, real_blkdev, sizeof(key_loc));
-    printf("get_crypt_ftr_info crypto key location: '%s'\n", key_loc);
-    if (!strcmp(key_loc, KEY_IN_FOOTER)) {
+    printf("get_crypt_ftr_info crypto key location: '%s'\n", key_fname);
+    if (!strcmp(key_fname, KEY_IN_FOOTER)) {
       if ( (fd = open(real_blkdev, O_RDWR)) < 0) {
         printf("Cannot open real block device %s\n", real_blkdev);
         return -1;
@@ -459,7 +396,7 @@ static int get_crypt_ftr_info(char **metadata_fname, off64_t *off)
       }
       close(fd);
     } else {
-      strlcpy(cached_metadata_fname, key_loc, sizeof(cached_metadata_fname));
+      strlcpy(cached_metadata_fname, key_fname, sizeof(cached_metadata_fname));
       cached_off = 0;
       cached_data = 1;
     }
@@ -478,65 +415,6 @@ static int get_crypt_ftr_info(char **metadata_fname, off64_t *off)
   return rc;
 }
 
-/* key or salt can be NULL, in which case just skip writing that value.  Useful to
- * update the failed mount count but not change the key.
- */
-static int put_crypt_ftr_and_key(struct crypt_mnt_ftr *crypt_ftr)
-{
-  printf("TWRP NOT putting crypt footer and key\n");
-  return 0;
-  int fd;
-  unsigned int nr_sec, cnt;
-  /* starting_off is set to the SEEK_SET offset
-   * where the crypto structure starts
-   */
-  off64_t starting_off;
-  int rc = -1;
-  char *fname = NULL;
-  struct stat statbuf;
-
-  if (get_crypt_ftr_info(&fname, &starting_off)) {
-    printf("Unable to get crypt_ftr_info\n");
-    return -1;
-  }
-  if (fname[0] != '/') {
-    printf("Unexpected value for crypto key location\n");
-    return -1;
-  }
-  if ( (fd = open(fname, O_RDWR | O_CREAT, 0600)) < 0) {
-    printf("Cannot open footer file %s for put\n", fname);
-    return -1;
-  }
-
-  /* Seek to the start of the crypt footer */
-  if (lseek64(fd, starting_off, SEEK_SET) == -1) {
-    printf("Cannot seek to real block device footer\n");
-    goto errout;
-  }
-
-  if ((cnt = write(fd, crypt_ftr, sizeof(struct crypt_mnt_ftr))) != sizeof(struct crypt_mnt_ftr)) {
-    printf("Cannot write real block device footer\n");
-    goto errout;
-  }
-
-  fstat(fd, &statbuf);
-  /* If the keys are kept on a raw block device, do not try to truncate it. */
-  if (S_ISREG(statbuf.st_mode)) {
-    if (ftruncate(fd, 0x4000)) {
-      printf("Cannot set footer file size\n");
-      goto errout;
-    }
-  }
-
-  /* Success! */
-  rc = 0;
-
-errout:
-  close(fd);
-  return rc;
-
-}
-
 static inline int unix_read(int  fd, void*  buff, int  len)
 {
     return TEMP_FAILURE_RETRY(read(fd, buff, len));
@@ -554,75 +432,6 @@ static void init_empty_persist_data(struct crypt_persist_data *pdata, int len)
     pdata->persist_valid_entries = 0;
 }
 
-/* A routine to update the passed in crypt_ftr to the lastest version.
- * fd is open read/write on the device that holds the crypto footer and persistent
- * data, crypt_ftr is a pointer to the struct to be updated, and offset is the
- * absolute offset to the start of the crypt_mnt_ftr on the passed in fd.
- */
-static void upgrade_crypt_ftr(int fd, struct crypt_mnt_ftr *crypt_ftr, off64_t offset)
-{
-    int orig_major = crypt_ftr->major_version;
-    int orig_minor = crypt_ftr->minor_version;
-printf("TWRP NOT upgrading crypto footer\n");
-return; // do not upgrade in recovery
-    if ((crypt_ftr->major_version == 1) && (crypt_ftr->minor_version == 0)) {
-        struct crypt_persist_data *pdata;
-        off64_t pdata_offset = offset + CRYPT_FOOTER_TO_PERSIST_OFFSET;
-
-        printf("upgrading crypto footer to 1.1");
-
-        pdata = malloc(CRYPT_PERSIST_DATA_SIZE);
-        if (pdata == NULL) {
-            printf("Cannot allocate persisent data\n");
-            return;
-        }
-        memset(pdata, 0, CRYPT_PERSIST_DATA_SIZE);
-
-        /* Need to initialize the persistent data area */
-        if (lseek64(fd, pdata_offset, SEEK_SET) == -1) {
-            printf("Cannot seek to persisent data offset\n");
-            return;
-        }
-        /* Write all zeros to the first copy, making it invalid */
-        unix_write(fd, pdata, CRYPT_PERSIST_DATA_SIZE);
-
-        /* Write a valid but empty structure to the second copy */
-        init_empty_persist_data(pdata, CRYPT_PERSIST_DATA_SIZE);
-        unix_write(fd, pdata, CRYPT_PERSIST_DATA_SIZE);
-
-        /* Update the footer */
-        crypt_ftr->persist_data_size = CRYPT_PERSIST_DATA_SIZE;
-        crypt_ftr->persist_data_offset[0] = pdata_offset;
-        crypt_ftr->persist_data_offset[1] = pdata_offset + CRYPT_PERSIST_DATA_SIZE;
-        crypt_ftr->minor_version = 1;
-    }
-
-    if ((crypt_ftr->major_version == 1) && (crypt_ftr->minor_version == 1)) {
-        printf("upgrading crypto footer to 1.2");
-        /* But keep the old kdf_type.
-         * It will get updated later to KDF_SCRYPT after the password has been verified.
-         */
-        crypt_ftr->kdf_type = KDF_PBKDF2;
-        get_device_scrypt_params(crypt_ftr);
-        crypt_ftr->minor_version = 2;
-    }
-
-    if ((crypt_ftr->major_version == 1) && (crypt_ftr->minor_version == 2)) {
-        printf("upgrading crypto footer to 1.3");
-        crypt_ftr->crypt_type = CRYPT_TYPE_PASSWORD;
-        crypt_ftr->minor_version = 3;
-    }
-
-    if ((orig_major != crypt_ftr->major_version) || (orig_minor != crypt_ftr->minor_version)) {
-        if (lseek64(fd, offset, SEEK_SET) == -1) {
-            printf("Cannot seek to crypt footer\n");
-            return;
-        }
-        unix_write(fd, crypt_ftr, sizeof(struct crypt_mnt_ftr));
-    }
-}
-
-
 static int get_crypt_ftr_and_key(struct crypt_mnt_ftr *crypt_ftr)
 {
   int fd;
@@ -682,9 +491,9 @@ static int get_crypt_ftr_and_key(struct crypt_mnt_ftr *crypt_ftr)
   /* If this is a verion 1.0 crypt_ftr, make it a 1.1 crypt footer, and update the
    * copy on disk before returning.
    */
-  if (crypt_ftr->minor_version < CURRENT_MINOR_VERSION) {
+  /*if (crypt_ftr->minor_version < CURRENT_MINOR_VERSION) {
     upgrade_crypt_ftr(fd, crypt_ftr, starting_off);
-  }
+  }*/
 
   /* Success! */
   rc = 0;
@@ -694,229 +503,6 @@ errout:
   return rc;
 }
 
-static int validate_persistent_data_storage(struct crypt_mnt_ftr *crypt_ftr)
-{
-    if (crypt_ftr->persist_data_offset[0] + crypt_ftr->persist_data_size >
-        crypt_ftr->persist_data_offset[1]) {
-        printf("Crypt_ftr persist data regions overlap");
-        return -1;
-    }
-
-    if (crypt_ftr->persist_data_offset[0] >= crypt_ftr->persist_data_offset[1]) {
-        printf("Crypt_ftr persist data region 0 starts after region 1");
-        return -1;
-    }
-
-    if (((crypt_ftr->persist_data_offset[1] + crypt_ftr->persist_data_size) -
-        (crypt_ftr->persist_data_offset[0] - CRYPT_FOOTER_TO_PERSIST_OFFSET)) >
-        CRYPT_FOOTER_OFFSET) {
-        printf("Persistent data extends past crypto footer");
-        return -1;
-    }
-
-    return 0;
-}
-
-static int load_persistent_data(void)
-{
-    struct crypt_mnt_ftr crypt_ftr;
-    struct crypt_persist_data *pdata = NULL;
-    char encrypted_state[PROPERTY_VALUE_MAX];
-    char *fname;
-    int found = 0;
-    int fd;
-    int ret;
-    int i;
-
-    if (persist_data) {
-        /* Nothing to do, we've already loaded or initialized it */
-        return 0;
-    }
-
-
-    /* If not encrypted, just allocate an empty table and initialize it */
-    property_get("ro.crypto.state", encrypted_state, "");
-    if (strcmp(encrypted_state, "encrypted") ) {
-        pdata = malloc(CRYPT_PERSIST_DATA_SIZE);
-        if (pdata) {
-            init_empty_persist_data(pdata, CRYPT_PERSIST_DATA_SIZE);
-            persist_data = pdata;
-            return 0;
-        }
-        return -1;
-    }
-
-    if(get_crypt_ftr_and_key(&crypt_ftr)) {
-        return -1;
-    }
-
-    if ((crypt_ftr.major_version < 1)
-        || (crypt_ftr.major_version == 1 && crypt_ftr.minor_version < 1)) {
-        printf("Crypt_ftr version doesn't support persistent data");
-        return -1;
-    }
-
-    if (get_crypt_ftr_info(&fname, NULL)) {
-        return -1;
-    }
-
-    ret = validate_persistent_data_storage(&crypt_ftr);
-    if (ret) {
-        return -1;
-    }
-
-    fd = open(fname, O_RDONLY);
-    if (fd < 0) {
-        printf("Cannot open %s metadata file", fname);
-        return -1;
-    }
-
-    if (persist_data == NULL) {
-        pdata = malloc(crypt_ftr.persist_data_size);
-        if (pdata == NULL) {
-            printf("Cannot allocate memory for persistent data");
-            goto err;
-        }
-    }
-
-    for (i = 0; i < 2; i++) {
-        if (lseek64(fd, crypt_ftr.persist_data_offset[i], SEEK_SET) < 0) {
-            printf("Cannot seek to read persistent data on %s", fname);
-            goto err2;
-        }
-        if (unix_read(fd, pdata, crypt_ftr.persist_data_size) < 0){
-            printf("Error reading persistent data on iteration %d", i);
-            goto err2;
-        }
-        if (pdata->persist_magic == PERSIST_DATA_MAGIC) {
-            found = 1;
-            break;
-        }
-    }
-
-    if (!found) {
-        printf("Could not find valid persistent data, creating");
-        init_empty_persist_data(pdata, crypt_ftr.persist_data_size);
-    }
-
-    /* Success */
-    persist_data = pdata;
-    close(fd);
-    return 0;
-
-err2:
-    free(pdata);
-
-err:
-    close(fd);
-    return -1;
-}
-
-static int save_persistent_data(void)
-{
-    struct crypt_mnt_ftr crypt_ftr;
-    struct crypt_persist_data *pdata;
-    char *fname;
-    off64_t write_offset;
-    off64_t erase_offset;
-    int found = 0;
-    int fd;
-    int ret;
-
-    if (persist_data == NULL) {
-        printf("No persistent data to save");
-        return -1;
-    }
-
-    if(get_crypt_ftr_and_key(&crypt_ftr)) {
-        return -1;
-    }
-
-    if ((crypt_ftr.major_version < 1)
-        || (crypt_ftr.major_version == 1 && crypt_ftr.minor_version < 1)) {
-        printf("Crypt_ftr version doesn't support persistent data");
-        return -1;
-    }
-
-    ret = validate_persistent_data_storage(&crypt_ftr);
-    if (ret) {
-        return -1;
-    }
-
-    if (get_crypt_ftr_info(&fname, NULL)) {
-        return -1;
-    }
-
-    fd = open(fname, O_RDWR);
-    if (fd < 0) {
-        printf("Cannot open %s metadata file", fname);
-        return -1;
-    }
-
-    pdata = malloc(crypt_ftr.persist_data_size);
-    if (pdata == NULL) {
-        printf("Cannot allocate persistant data");
-        goto err;
-    }
-
-    if (lseek64(fd, crypt_ftr.persist_data_offset[0], SEEK_SET) < 0) {
-        printf("Cannot seek to read persistent data on %s", fname);
-        goto err2;
-    }
-
-    if (unix_read(fd, pdata, crypt_ftr.persist_data_size) < 0) {
-            printf("Error reading persistent data before save");
-            goto err2;
-    }
-
-    if (pdata->persist_magic == PERSIST_DATA_MAGIC) {
-        /* The first copy is the curent valid copy, so write to
-         * the second copy and erase this one */
-       write_offset = crypt_ftr.persist_data_offset[1];
-       erase_offset = crypt_ftr.persist_data_offset[0];
-    } else {
-        /* The second copy must be the valid copy, so write to
-         * the first copy, and erase the second */
-       write_offset = crypt_ftr.persist_data_offset[0];
-       erase_offset = crypt_ftr.persist_data_offset[1];
-    }
-
-    /* Write the new copy first, if successful, then erase the old copy */
-    if (lseek(fd, write_offset, SEEK_SET) < 0) {
-        printf("Cannot seek to write persistent data");
-        goto err2;
-    }
-    if (unix_write(fd, persist_data, crypt_ftr.persist_data_size) ==
-        (int) crypt_ftr.persist_data_size) {
-        if (lseek(fd, erase_offset, SEEK_SET) < 0) {
-            printf("Cannot seek to erase previous persistent data");
-            goto err2;
-        }
-        fsync(fd);
-        memset(pdata, 0, crypt_ftr.persist_data_size);
-        if (unix_write(fd, pdata, crypt_ftr.persist_data_size) !=
-            (int) crypt_ftr.persist_data_size) {
-            printf("Cannot write to erase previous persistent data");
-            goto err2;
-        }
-        fsync(fd);
-    } else {
-        printf("Cannot write to save persistent data");
-        goto err2;
-    }
-
-    /* Success */
-    free(pdata);
-    close(fd);
-    return 0;
-
-err2:
-    free(pdata);
-err:
-    close(fd);
-    return -1;
-}
-
 static int hexdigit (char c)
 {
     if (c >= '0' && c <= '9') return c - '0';
@@ -1424,321 +1010,12 @@ static int decrypt_master_key(char *passwd, unsigned char *decrypted_master_key,
     return ret;
 }
 
-static int create_encrypted_random_key(char *passwd, unsigned char *master_key, unsigned char *salt,
-        struct crypt_mnt_ftr *crypt_ftr) {
-    int fd;
-    unsigned char key_buf[KEY_LEN_BYTES];
-    EVP_CIPHER_CTX e_ctx;
-    int encrypted_len, final_len;
-
-    /* Get some random bits for a key */
-    fd = open("/dev/urandom", O_RDONLY);
-    read(fd, key_buf, sizeof(key_buf));
-    read(fd, salt, SALT_LEN);
-    close(fd);
-
-    /* Now encrypt it with the password */
-    return encrypt_master_key(passwd, salt, key_buf, master_key, crypt_ftr);
-}
-
-static int wait_and_unmount(char *mountpoint, bool kill)
-{
-    int i, err, rc;
-#define WAIT_UNMOUNT_COUNT 20
-
-    /*  Now umount the tmpfs filesystem */
-    for (i=0; i<WAIT_UNMOUNT_COUNT; i++) {
-        if (umount(mountpoint) == 0) {
-            break;
-        }
-
-        if (errno == EINVAL) {
-            /* EINVAL is returned if the directory is not a mountpoint,
-             * i.e. there is no filesystem mounted there.  So just get out.
-             */
-            break;
-        }
-
-        err = errno;
-
-        /* If allowed, be increasingly aggressive before the last two retries */
-        if (kill) {
-            if (i == (WAIT_UNMOUNT_COUNT - 3)) {
-                printf("sending SIGHUP to processes with open files\n");
-                //vold_killProcessesWithOpenFiles(mountpoint, 1);
-            } else if (i == (WAIT_UNMOUNT_COUNT - 2)) {
-                printf("sending SIGKILL to processes with open files\n");
-                //vold_killProcessesWithOpenFiles(mountpoint, 2);
-            }
-        }
-
-        sleep(1);
-    }
-
-    if (i < WAIT_UNMOUNT_COUNT) {
-      printf("unmounting %s succeeded\n", mountpoint);
-      rc = 0;
-    } else {
-      //vold_killProcessesWithOpenFiles(mountpoint, 0);
-      printf("unmounting %s failed: %s\n", mountpoint, strerror(err));
-      rc = -1;
-    }
-
-    return rc;
-}
-
-#define DATA_PREP_TIMEOUT 200
-static int prep_data_fs(void)
-{
-    int i;
-
-    /* Do the prep of the /data filesystem */
-    property_set("vold.post_fs_data_done", "0");
-    property_set("vold.decrypt", "trigger_post_fs_data");
-    printf("Just triggered post_fs_data\n");
-
-    /* Wait a max of 50 seconds, hopefully it takes much less */
-    for (i=0; i<DATA_PREP_TIMEOUT; i++) {
-        char p[PROPERTY_VALUE_MAX];
-
-        property_get("vold.post_fs_data_done", p, "0");
-        if (*p == '1') {
-            break;
-        } else {
-            usleep(250000);
-        }
-    }
-    if (i == DATA_PREP_TIMEOUT) {
-        /* Ugh, we failed to prep /data in time.  Bail. */
-        printf("post_fs_data timed out!\n");
-        return -1;
-    } else {
-        printf("post_fs_data done\n");
-        return 0;
-    }
-}
-
-static void cryptfs_set_corrupt()
-{
-    // Mark the footer as bad
-    struct crypt_mnt_ftr crypt_ftr;
-    if (get_crypt_ftr_and_key(&crypt_ftr)) {
-        printf("Failed to get crypto footer - panic");
-        return;
-    }
-
-    crypt_ftr.flags |= CRYPT_DATA_CORRUPT;
-    if (put_crypt_ftr_and_key(&crypt_ftr)) {
-        printf("Failed to set crypto footer - panic");
-        return;
-    }
-}
-
-static void cryptfs_trigger_restart_min_framework()
-{
-    if (fs_mgr_do_tmpfs_mount(DATA_MNT_POINT)) {
-      printf("Failed to mount tmpfs on data - panic");
-      return;
-    }
-
-    if (property_set("vold.decrypt", "trigger_post_fs_data")) {
-        printf("Failed to trigger post fs data - panic");
-        return;
-    }
-
-    if (property_set("vold.decrypt", "trigger_restart_min_framework")) {
-        printf("Failed to trigger restart min framework - panic");
-        return;
-    }
-}
-
-/* returns < 0 on failure */
-static int cryptfs_restart_internal(int restart_main)
-{
-    char fs_type[32];
-    char real_blkdev[MAXPATHLEN];
-    char crypto_blkdev[MAXPATHLEN];
-    char fs_options[256];
-    unsigned long mnt_flags;
-    struct stat statbuf;
-    int rc = -1, i;
-    static int restart_successful = 0;
-
-    /* Validate that it's OK to call this routine */
-    if (! master_key_saved) {
-        printf("Encrypted filesystem not validated, aborting");
-        return -1;
-    }
-
-    if (restart_successful) {
-        printf("System already restarted with encrypted disk, aborting");
-        return -1;
-    }
-
-    if (restart_main) {
-        /* Here is where we shut down the framework.  The init scripts
-         * start all services in one of three classes: core, main or late_start.
-         * On boot, we start core and main.  Now, we stop main, but not core,
-         * as core includes vold and a few other really important things that
-         * we need to keep running.  Once main has stopped, we should be able
-         * to umount the tmpfs /data, then mount the encrypted /data.
-         * We then restart the class main, and also the class late_start.
-         * At the moment, I've only put a few things in late_start that I know
-         * are not needed to bring up the framework, and that also cause problems
-         * with unmounting the tmpfs /data, but I hope to add add more services
-         * to the late_start class as we optimize this to decrease the delay
-         * till the user is asked for the password to the filesystem.
-         */
-
-        /* The init files are setup to stop the class main when vold.decrypt is
-         * set to trigger_reset_main.
-         */
-        property_set("vold.decrypt", "trigger_reset_main");
-        printf("Just asked init to shut down class main\n");
-
-        /* Ugh, shutting down the framework is not synchronous, so until it
-         * can be fixed, this horrible hack will wait a moment for it all to
-         * shut down before proceeding.  Without it, some devices cannot
-         * restart the graphics services.
-         */
-        sleep(2);
-    }
-
-    /* Now that the framework is shutdown, we should be able to umount()
-     * the tmpfs filesystem, and mount the real one.
-     */
-
-    property_get("ro.crypto.fs_crypto_blkdev", crypto_blkdev, "");
-    if (strlen(crypto_blkdev) == 0) {
-        printf("fs_crypto_blkdev not set\n");
-        return -1;
-    }
-
-    if (! (rc = wait_and_unmount(DATA_MNT_POINT, true)) ) {
-        /* If ro.crypto.readonly is set to 1, mount the decrypted
-         * filesystem readonly.  This is used when /data is mounted by
-         * recovery mode.
-         */
-        char ro_prop[PROPERTY_VALUE_MAX];
-        property_get("ro.crypto.readonly", ro_prop, "");
-        if (strlen(ro_prop) > 0 && atoi(ro_prop)) {
-            struct fstab_rec* rec = fs_mgr_get_entry_for_mount_point(fstab, DATA_MNT_POINT);
-            rec->flags |= MS_RDONLY;
-        }
-
-        /* If that succeeded, then mount the decrypted filesystem */
-        int retries = RETRY_MOUNT_ATTEMPTS;
-        int mount_rc;
-        while ((mount_rc = fs_mgr_do_mount(fstab, DATA_MNT_POINT,
-                                           crypto_blkdev, 0))
-               != 0) {
-            if (mount_rc == FS_MGR_DOMNT_BUSY) {
-                /* TODO: invoke something similar to
-                   Process::killProcessWithOpenFiles(DATA_MNT_POINT,
-                                   retries > RETRY_MOUNT_ATTEMPT/2 ? 1 : 2 ) */
-                printf("Failed to mount %s because it is busy - waiting",
-                      crypto_blkdev);
-                if (--retries) {
-                    sleep(RETRY_MOUNT_DELAY_SECONDS);
-                } else {
-                    /* Let's hope that a reboot clears away whatever is keeping
-                       the mount busy */
-                    cryptfs_reboot(reboot);
-                }
-            } else {
-                printf("Failed to mount decrypted data");
-                cryptfs_set_corrupt();
-                cryptfs_trigger_restart_min_framework();
-                printf("Started framework to offer wipe");
-                return -1;
-            }
-        }
-
-        property_set("vold.decrypt", "trigger_load_persist_props");
-        /* Create necessary paths on /data */
-        if (prep_data_fs()) {
-            return -1;
-        }
-
-        /* startup service classes main and late_start */
-        property_set("vold.decrypt", "trigger_restart_framework");
-        printf("Just triggered restart_framework\n");
-
-        /* Give it a few moments to get started */
-        sleep(1);
-    }
-
-    if (rc == 0) {
-        restart_successful = 1;
-    }
-
-    return rc;
-}
-
-int cryptfs_restart(void)
-{
-    /* Call internal implementation forcing a restart of main service group */
-    return cryptfs_restart_internal(1);
-}
-
-static int do_crypto_complete(char *mount_point UNUSED)
-{
-  struct crypt_mnt_ftr crypt_ftr;
-  char encrypted_state[PROPERTY_VALUE_MAX];
-  char key_loc[PROPERTY_VALUE_MAX];
-
-  property_get("ro.crypto.state", encrypted_state, "");
-  if (strcmp(encrypted_state, "encrypted") ) {
-    printf("not running with encryption, aborting");
-    return CRYPTO_COMPLETE_NOT_ENCRYPTED;
-  }
-
-  if (get_crypt_ftr_and_key(&crypt_ftr)) {
-    fs_mgr_get_crypt_info(fstab, key_loc, 0, sizeof(key_loc));
-
-    /*
-     * Only report this error if key_loc is a file and it exists.
-     * If the device was never encrypted, and /data is not mountable for
-     * some reason, returning 1 should prevent the UI from presenting the
-     * a "enter password" screen, or worse, a "press button to wipe the
-     * device" screen.
-     */
-    if ((key_loc[0] == '/') && (access("key_loc", F_OK) == -1)) {
-      printf("master key file does not exist, aborting");
-      return CRYPTO_COMPLETE_NOT_ENCRYPTED;
-    } else {
-      printf("Error getting crypt footer and key\n");
-      return CRYPTO_COMPLETE_BAD_METADATA;
-    }
-  }
-
-  // Test for possible error flags
-  if (crypt_ftr.flags & CRYPT_ENCRYPTION_IN_PROGRESS){
-    printf("Encryption process is partway completed\n");
-    return CRYPTO_COMPLETE_PARTIAL;
-  }
-
-  if (crypt_ftr.flags & CRYPT_INCONSISTENT_STATE){
-    printf("Encryption process was interrupted but cannot continue\n");
-    return CRYPTO_COMPLETE_INCONSISTENT;
-  }
-
-  if (crypt_ftr.flags & CRYPT_DATA_CORRUPT){
-    printf("Encryption is successful but data is corrupt\n");
-    return CRYPTO_COMPLETE_CORRUPT;
-  }
-
-  /* We passed the test! We shall diminish, and return to the west */
-  return CRYPTO_COMPLETE_ENCRYPTED;
-}
-
 static int test_mount_encrypted_fs(struct crypt_mnt_ftr* crypt_ftr,
                                    char *passwd, char *mount_point, char *label)
 {
   /* Allocate enough space for a 256 bit key, but we may use less */
   unsigned char decrypted_master_key[32];
   char crypto_blkdev[MAXPATHLEN];
-  char real_blkdev[MAXPATHLEN];
   char tmp_mount_point[64];
   unsigned int orig_failed_decrypt_count;
   int rc;
@@ -1761,8 +1038,6 @@ static int test_mount_encrypted_fs(struct crypt_mnt_ftr* crypt_ftr,
     }
   }
 
-  fs_mgr_get_crypt_info(fstab, 0, real_blkdev, sizeof(real_blkdev));
-
   // Create crypto block device - all (non fatal) code paths
   // need it
   if (create_crypto_blk_dev(crypt_ftr, decrypted_master_key,
@@ -1795,7 +1070,7 @@ static int test_mount_encrypted_fs(struct crypt_mnt_ftr* crypt_ftr,
      * the footer, not the key. */
     sprintf(tmp_mount_point, "%s/tmp_mnt", mount_point);
     mkdir(tmp_mount_point, 0755);
-    if (fs_mgr_do_mount(fstab, DATA_MNT_POINT, crypto_blkdev, tmp_mount_point)) {
+    if (mount(crypto_blkdev, tmp_mount_point, file_system, NULL, NULL) != 0) {
       printf("Error temp mounting decrypted block device '%s'\n", crypto_blkdev);
       delete_crypto_blk_dev(label);
 
@@ -1877,52 +1152,6 @@ int cryptfs_revert_volume(const char *label)
     return delete_crypto_blk_dev((char *)label);
 }
 
-/*
- * Called by vold when it's asked to mount an encrypted, nonremovable volume.
- * Setup a dm-crypt mapping, use the saved master key from
- * setting up the /data mapping, and return the new device path.
- */
-int cryptfs_setup_volume(const char *label, int major, int minor,
-                         char *crypto_sys_path, unsigned int max_path,
-                         int *new_major, int *new_minor)
-{
-    char real_blkdev[MAXPATHLEN], crypto_blkdev[MAXPATHLEN];
-    struct crypt_mnt_ftr sd_crypt_ftr;
-    struct stat statbuf;
-    int nr_sec, fd;
-
-    sprintf(real_blkdev, "/dev/block/vold/%d:%d", major, minor);
-
-    get_crypt_ftr_and_key(&sd_crypt_ftr);
-
-    /* Update the fs_size field to be the size of the volume */
-    fd = open(real_blkdev, O_RDONLY);
-    nr_sec = get_blkdev_size(fd);
-    close(fd);
-    if (nr_sec == 0) {
-        printf("Cannot get size of volume %s\n", real_blkdev);
-        return -1;
-    }
-
-    sd_crypt_ftr.fs_size = nr_sec;
-    create_crypto_blk_dev(&sd_crypt_ftr, saved_master_key, real_blkdev, 
-                          crypto_blkdev, label);
-
-    stat(crypto_blkdev, &statbuf);
-    *new_major = MAJOR(statbuf.st_rdev);
-    *new_minor = MINOR(statbuf.st_rdev);
-
-    /* Create path to sys entry for this block device */
-    snprintf(crypto_sys_path, max_path, "/devices/virtual/block/%s", strrchr(crypto_blkdev, '/')+1);
-
-    return 0;
-}
-
-int cryptfs_crypto_complete(void)
-{
-  return do_crypto_complete("/data");
-}
-
 int check_unmounted_and_get_ftr(struct crypt_mnt_ftr* crypt_ftr)
 {
     char encrypted_state[PROPERTY_VALUE_MAX];
@@ -2034,24 +1263,11 @@ char* hexadj_passwd(const char* passwd)
     return hex;
 }
 
-#define FSTAB_PREFIX "/fstab."
-
-int cryptfs_check_footer(void)
+int cryptfs_check_footer()
 {
     int rc = -1;
-    char fstab_filename[PROPERTY_VALUE_MAX + sizeof(FSTAB_PREFIX)];
-    char propbuf[PROPERTY_VALUE_MAX];
     struct crypt_mnt_ftr crypt_ftr;
 
-    property_get("ro.hardware", propbuf, "");
-    snprintf(fstab_filename, sizeof(fstab_filename), FSTAB_PREFIX"%s", propbuf);
-
-    fstab = fs_mgr_read_fstab(fstab_filename);
-    if (!fstab) {
-        printf("failed to open %s\n", fstab_filename);
-        return -1;
-    }
-
     rc = get_crypt_ftr_and_key(&crypt_ftr);
 
     return rc;
@@ -2061,17 +1277,6 @@ int cryptfs_check_passwd(char *passwd)
 {
     struct crypt_mnt_ftr crypt_ftr;
     int rc;
-    char fstab_filename[PROPERTY_VALUE_MAX + sizeof(FSTAB_PREFIX)];
-    char propbuf[PROPERTY_VALUE_MAX];
-
-    property_get("ro.hardware", propbuf, "");
-    snprintf(fstab_filename, sizeof(fstab_filename), FSTAB_PREFIX"%s", propbuf);
-
-    fstab = fs_mgr_read_fstab(fstab_filename);
-    if (!fstab) {
-        printf("failed to open %s\n", fstab_filename);
-        return -1;
-    }
 
     rc = check_unmounted_and_get_ftr(&crypt_ftr);
     if (rc)
@@ -2223,1366 +1428,11 @@ static int cryptfs_init_crypt_mnt_ftr(struct crypt_mnt_ftr *ftr)
     return 0;
 }
 
-static int cryptfs_enable_wipe(char *crypto_blkdev, off64_t size, int type)
-{
-    const char *args[10];
-    char size_str[32]; /* Must be large enough to hold a %lld and null byte */
-    int num_args;
-    int status;
-    int tmp;
-    int rc = -1;
-
-    if (type == EXT4_FS) {
-        args[0] = "/system/bin/make_ext4fs";
-        args[1] = "-a";
-        args[2] = "/data";
-        args[3] = "-l";
-        snprintf(size_str, sizeof(size_str), "%" PRId64, size * 512);
-        args[4] = size_str;
-        args[5] = crypto_blkdev;
-        num_args = 6;
-        printf("Making empty filesystem with command %s %s %s %s %s %s\n",
-              args[0], args[1], args[2], args[3], args[4], args[5]);
-    } else if (type == F2FS_FS) {
-        args[0] = "/system/bin/mkfs.f2fs";
-        args[1] = "-t";
-        args[2] = "-d1";
-        args[3] = crypto_blkdev;
-        snprintf(size_str, sizeof(size_str), "%" PRId64, size);
-        args[4] = size_str;
-        num_args = 5;
-        printf("Making empty filesystem with command %s %s %s %s %s\n",
-              args[0], args[1], args[2], args[3], args[4]);
-    } else {
-        printf("cryptfs_enable_wipe(): unknown filesystem type %d\n", type);
-        return -1;
-    }
-
-    tmp = android_fork_execvp(num_args, (char **)args, &status, false, true);
-
-    if (tmp != 0) {
-      printf("Error creating empty filesystem on %s due to logwrap error\n", crypto_blkdev);
-    } else {
-        if (WIFEXITED(status)) {
-            if (WEXITSTATUS(status)) {
-                printf("Error creating filesystem on %s, exit status %d ",
-                      crypto_blkdev, WEXITSTATUS(status));
-            } else {
-                printf("Successfully created filesystem on %s\n", crypto_blkdev);
-                rc = 0;
-            }
-        } else {
-            printf("Error creating filesystem on %s, did not exit normally\n", crypto_blkdev);
-       }
-    }
-
-    return rc;
-}
-
-#define CRYPT_INPLACE_BUFSIZE 4096
-#define CRYPT_SECTORS_PER_BUFSIZE (CRYPT_INPLACE_BUFSIZE / CRYPT_SECTOR_SIZE)
-#define CRYPT_SECTOR_SIZE 512
-
-/* aligned 32K writes tends to make flash happy.
- * SD card association recommends it.
- */
-#define BLOCKS_AT_A_TIME 8
-
-struct encryptGroupsData
-{
-    int realfd;
-    int cryptofd;
-    off64_t numblocks;
-    off64_t one_pct, cur_pct, new_pct;
-    off64_t blocks_already_done, tot_numblocks;
-    off64_t used_blocks_already_done, tot_used_blocks;
-    char* real_blkdev, * crypto_blkdev;
-    int count;
-    off64_t offset;
-    char* buffer;
-    off64_t last_written_sector;
-    int completed;
-    time_t time_started;
-    int remaining_time;
-};
-
-static void update_progress(struct encryptGroupsData* data, int is_used)
-{
-    data->blocks_already_done++;
-
-    if (is_used) {
-        data->used_blocks_already_done++;
-    }
-    if (data->tot_used_blocks) {
-        data->new_pct = data->used_blocks_already_done / data->one_pct;
-    } else {
-        data->new_pct = data->blocks_already_done / data->one_pct;
-    }
-
-    if (data->new_pct > data->cur_pct) {
-        char buf[8];
-        data->cur_pct = data->new_pct;
-        snprintf(buf, sizeof(buf), "%" PRId64, data->cur_pct);
-        property_set("vold.encrypt_progress", buf);
-    }
-
-    if (data->cur_pct >= 5) {
-        struct timespec time_now;
-        if (clock_gettime(CLOCK_MONOTONIC, &time_now)) {
-            printf("Error getting time");
-        } else {
-            double elapsed_time = difftime(time_now.tv_sec, data->time_started);
-            off64_t remaining_blocks = data->tot_used_blocks
-                                       - data->used_blocks_already_done;
-            int remaining_time = (int)(elapsed_time * remaining_blocks
-                                       / data->used_blocks_already_done);
-
-            // Change time only if not yet set, lower, or a lot higher for
-            // best user experience
-            if (data->remaining_time == -1
-                || remaining_time < data->remaining_time
-                || remaining_time > data->remaining_time + 60) {
-                char buf[8];
-                snprintf(buf, sizeof(buf), "%d", remaining_time);
-                property_set("vold.encrypt_time_remaining", buf);
-                data->remaining_time = remaining_time;
-            }
-        }
-    }
-}
-
-static void log_progress(struct encryptGroupsData const* data, bool completed)
-{
-    // Precondition - if completed data = 0 else data != 0
-
-    // Track progress so we can skip logging blocks
-    static off64_t offset = -1;
-
-    // Need to close existing 'Encrypting from' log?
-    if (completed || (offset != -1 && data->offset != offset)) {
-        printf("Encrypted to sector %" PRId64,
-              offset / info.block_size * CRYPT_SECTOR_SIZE);
-        offset = -1;
-    }
-
-    // Need to start new 'Encrypting from' log?
-    if (!completed && offset != data->offset) {
-        printf("Encrypting from sector %" PRId64,
-              data->offset / info.block_size * CRYPT_SECTOR_SIZE);
-    }
-
-    // Update offset
-    if (!completed) {
-        offset = data->offset + (off64_t)data->count * info.block_size;
-    }
-}
-
-static int flush_outstanding_data(struct encryptGroupsData* data)
-{
-    if (data->count == 0) {
-        return 0;
-    }
-
-    printf("Copying %d blocks at offset %" PRIx64, data->count, data->offset);
-
-    if (pread64(data->realfd, data->buffer,
-                info.block_size * data->count, data->offset)
-        <= 0) {
-        printf("Error reading real_blkdev %s for inplace encrypt",
-              data->real_blkdev);
-        return -1;
-    }
-
-    if (pwrite64(data->cryptofd, data->buffer,
-                 info.block_size * data->count, data->offset)
-        <= 0) {
-        printf("Error writing crypto_blkdev %s for inplace encrypt",
-              data->crypto_blkdev);
-        return -1;
-    } else {
-      log_progress(data, false);
-    }
-
-    data->count = 0;
-    data->last_written_sector = (data->offset + data->count)
-                                / info.block_size * CRYPT_SECTOR_SIZE - 1;
-    return 0;
-}
-
-static int encrypt_groups(struct encryptGroupsData* data)
-{
-    unsigned int i;
-    u8 *block_bitmap = 0;
-    unsigned int block;
-    off64_t ret;
-    int rc = -1;
-
-    data->buffer = malloc(info.block_size * BLOCKS_AT_A_TIME);
-    if (!data->buffer) {
-        printf("Failed to allocate crypto buffer");
-        goto errout;
-    }
-
-    block_bitmap = malloc(info.block_size);
-    if (!block_bitmap) {
-        printf("failed to allocate block bitmap");
-        goto errout;
-    }
-
-    for (i = 0; i < aux_info.groups; ++i) {
-        printf("Encrypting group %d", i);
-
-        u32 first_block = aux_info.first_data_block + i * info.blocks_per_group;
-        u32 block_count = min(info.blocks_per_group,
-                             aux_info.len_blocks - first_block);
-
-        off64_t offset = (u64)info.block_size
-                         * aux_info.bg_desc[i].bg_block_bitmap;
-
-        ret = pread64(data->realfd, block_bitmap, info.block_size, offset);
-        if (ret != (int)info.block_size) {
-            printf("failed to read all of block group bitmap %d", i);
-            goto errout;
-        }
-
-        offset = (u64)info.block_size * first_block;
-
-        data->count = 0;
-
-        for (block = 0; block < block_count; block++) {
-            int used = bitmap_get_bit(block_bitmap, block);
-            update_progress(data, used);
-            if (used) {
-                if (data->count == 0) {
-                    data->offset = offset;
-                }
-                data->count++;
-            } else {
-                if (flush_outstanding_data(data)) {
-                    goto errout;
-                }
-            }
-
-            offset += info.block_size;
-
-            /* Write data if we are aligned or buffer size reached */
-            if (offset % (info.block_size * BLOCKS_AT_A_TIME) == 0
-                || data->count == BLOCKS_AT_A_TIME) {
-                if (flush_outstanding_data(data)) {
-                    goto errout;
-                }
-            }
-
-            if (1) {
-                printf("Stopping encryption due to low battery");
-                rc = 0;
-                goto errout;
-            }
-
-        }
-        if (flush_outstanding_data(data)) {
-            goto errout;
-        }
-    }
-
-    data->completed = 1;
-    rc = 0;
-
-errout:
-    log_progress(0, true);
-    free(data->buffer);
-    free(block_bitmap);
-    return rc;
-}
-
-static int cryptfs_enable_inplace_ext4(char *crypto_blkdev,
-                                       char *real_blkdev,
-                                       off64_t size,
-                                       off64_t *size_already_done,
-                                       off64_t tot_size,
-                                       off64_t previously_encrypted_upto)
-{
-    u32 i;
-    struct encryptGroupsData data;
-    int rc; // Can't initialize without causing warning -Wclobbered
-
-    if (previously_encrypted_upto > *size_already_done) {
-        printf("Not fast encrypting since resuming part way through");
-        return -1;
-    }
-
-    memset(&data, 0, sizeof(data));
-    data.real_blkdev = real_blkdev;
-    data.crypto_blkdev = crypto_blkdev;
-
-    if ( (data.realfd = open(real_blkdev, O_RDWR)) < 0) {
-        printf("Error opening real_blkdev %s for inplace encrypt. err=%d(%s)\n",
-              real_blkdev, errno, strerror(errno));
-        rc = -1;
-        goto errout;
-    }
-
-    if ( (data.cryptofd = open(crypto_blkdev, O_WRONLY)) < 0) {
-        printf("Error opening crypto_blkdev %s for ext4 inplace encrypt. err=%d(%s)\n",
-              crypto_blkdev, errno, strerror(errno));
-        rc = ENABLE_INPLACE_ERR_DEV;
-        goto errout;
-    }
-
-    if (setjmp(setjmp_env)) {
-        printf("Reading ext4 extent caused an exception\n");
-        rc = -1;
-        goto errout;
-    }
-
-    if (read_ext(data.realfd, 0) != 0) {
-        printf("Failed to read ext4 extent\n");
-        rc = -1;
-        goto errout;
-    }
-
-    data.numblocks = size / CRYPT_SECTORS_PER_BUFSIZE;
-    data.tot_numblocks = tot_size / CRYPT_SECTORS_PER_BUFSIZE;
-    data.blocks_already_done = *size_already_done / CRYPT_SECTORS_PER_BUFSIZE;
-
-    printf("Encrypting ext4 filesystem in place...");
-
-    data.tot_used_blocks = data.numblocks;
-    for (i = 0; i < aux_info.groups; ++i) {
-      data.tot_used_blocks -= aux_info.bg_desc[i].bg_free_blocks_count;
-    }
-
-    data.one_pct = data.tot_used_blocks / 100;
-    data.cur_pct = 0;
-
-    struct timespec time_started = {0};
-    if (clock_gettime(CLOCK_MONOTONIC, &time_started)) {
-        printf("Error getting time at start");
-        // Note - continue anyway - we'll run with 0
-    }
-    data.time_started = time_started.tv_sec;
-    data.remaining_time = -1;
-
-    rc = encrypt_groups(&data);
-    if (rc) {
-        printf("Error encrypting groups");
-        goto errout;
-    }
-
-    *size_already_done += data.completed ? size : data.last_written_sector;
-    rc = 0;
-
-errout:
-    close(data.realfd);
-    close(data.cryptofd);
-
-    return rc;
-}
-
-static void log_progress_f2fs(u64 block, bool completed)
-{
-    // Precondition - if completed data = 0 else data != 0
-
-    // Track progress so we can skip logging blocks
-    static u64 last_block = (u64)-1;
-
-    // Need to close existing 'Encrypting from' log?
-    if (completed || (last_block != (u64)-1 && block != last_block + 1)) {
-        printf("Encrypted to block %" PRId64, last_block);
-        last_block = -1;
-    }
-
-    // Need to start new 'Encrypting from' log?
-    if (!completed && (last_block == (u64)-1 || block != last_block + 1)) {
-        printf("Encrypting from block %" PRId64, block);
-    }
-
-    // Update offset
-    if (!completed) {
-        last_block = block;
-    }
-}
-
-static int encrypt_one_block_f2fs(u64 pos, void *data)
-{
-    struct encryptGroupsData *priv_dat = (struct encryptGroupsData *)data;
-
-    priv_dat->blocks_already_done = pos - 1;
-    update_progress(priv_dat, 1);
-
-    off64_t offset = pos * CRYPT_INPLACE_BUFSIZE;
-
-    if (pread64(priv_dat->realfd, priv_dat->buffer, CRYPT_INPLACE_BUFSIZE, offset) <= 0) {
-        printf("Error reading real_blkdev %s for f2fs inplace encrypt", priv_dat->crypto_blkdev);
-        return -1;
-    }
-
-    if (pwrite64(priv_dat->cryptofd, priv_dat->buffer, CRYPT_INPLACE_BUFSIZE, offset) <= 0) {
-        printf("Error writing crypto_blkdev %s for f2fs inplace encrypt", priv_dat->crypto_blkdev);
-        return -1;
-    } else {
-        log_progress_f2fs(pos, false);
-    }
-
-    return 0;
-}
-
-static int cryptfs_enable_inplace_f2fs(char *crypto_blkdev,
-                                       char *real_blkdev,
-                                       off64_t size,
-                                       off64_t *size_already_done,
-                                       off64_t tot_size,
-                                       off64_t previously_encrypted_upto)
-{
-    u32 i;
-    struct encryptGroupsData data;
-    struct f2fs_info *f2fs_info = NULL;
-    int rc = ENABLE_INPLACE_ERR_OTHER;
-    if (previously_encrypted_upto > *size_already_done) {
-        printf("Not fast encrypting since resuming part way through");
-        return ENABLE_INPLACE_ERR_OTHER;
-    }
-    memset(&data, 0, sizeof(data));
-    data.real_blkdev = real_blkdev;
-    data.crypto_blkdev = crypto_blkdev;
-    data.realfd = -1;
-    data.cryptofd = -1;
-    if ( (data.realfd = open64(real_blkdev, O_RDWR)) < 0) {
-        printf("Error opening real_blkdev %s for f2fs inplace encrypt\n",
-              real_blkdev);
-        goto errout;
-    }
-    if ( (data.cryptofd = open64(crypto_blkdev, O_WRONLY)) < 0) {
-        printf("Error opening crypto_blkdev %s for f2fs inplace encrypt. err=%d(%s)\n",
-              crypto_blkdev, errno, strerror(errno));
-        rc = ENABLE_INPLACE_ERR_DEV;
-        goto errout;
-    }
-
-    f2fs_info = generate_f2fs_info(data.realfd);
-    if (!f2fs_info)
-      goto errout;
-
-    data.numblocks = size / CRYPT_SECTORS_PER_BUFSIZE;
-    data.tot_numblocks = tot_size / CRYPT_SECTORS_PER_BUFSIZE;
-    data.blocks_already_done = *size_already_done / CRYPT_SECTORS_PER_BUFSIZE;
-
-    data.tot_used_blocks = get_num_blocks_used(f2fs_info);
-
-    data.one_pct = data.tot_used_blocks / 100;
-    data.cur_pct = 0;
-    data.time_started = time(NULL);
-    data.remaining_time = -1;
-
-    data.buffer = malloc(f2fs_info->block_size);
-    if (!data.buffer) {
-        printf("Failed to allocate crypto buffer");
-        goto errout;
-    }
-
-    data.count = 0;
-
-    /* Currently, this either runs to completion, or hits a nonrecoverable error */
-    rc = run_on_used_blocks(data.blocks_already_done, f2fs_info, &encrypt_one_block_f2fs, &data);
-
-    if (rc) {
-        printf("Error in running over f2fs blocks");
-        rc = ENABLE_INPLACE_ERR_OTHER;
-        goto errout;
-    }
-
-    *size_already_done += size;
-    rc = 0;
-
-errout:
-    if (rc)
-        printf("Failed to encrypt f2fs filesystem on %s", real_blkdev);
-
-    log_progress_f2fs(0, true);
-    free(f2fs_info);
-    free(data.buffer);
-    close(data.realfd);
-    close(data.cryptofd);
-
-    return rc;
-}
-
-static int cryptfs_enable_inplace_full(char *crypto_blkdev, char *real_blkdev,
-                                       off64_t size, off64_t *size_already_done,
-                                       off64_t tot_size,
-                                       off64_t previously_encrypted_upto)
-{
-    int realfd, cryptofd;
-    char *buf[CRYPT_INPLACE_BUFSIZE];
-    int rc = ENABLE_INPLACE_ERR_OTHER;
-    off64_t numblocks, i, remainder;
-    off64_t one_pct, cur_pct, new_pct;
-    off64_t blocks_already_done, tot_numblocks;
-
-    if ( (realfd = open(real_blkdev, O_RDONLY)) < 0) { 
-        printf("Error opening real_blkdev %s for inplace encrypt\n", real_blkdev);
-        return ENABLE_INPLACE_ERR_OTHER;
-    }
-
-    if ( (cryptofd = open(crypto_blkdev, O_WRONLY)) < 0) { 
-        printf("Error opening crypto_blkdev %s for inplace encrypt. err=%d(%s)\n",
-              crypto_blkdev, errno, strerror(errno));
-        close(realfd);
-        return ENABLE_INPLACE_ERR_DEV;
-    }
-
-    /* This is pretty much a simple loop of reading 4K, and writing 4K.
-     * The size passed in is the number of 512 byte sectors in the filesystem.
-     * So compute the number of whole 4K blocks we should read/write,
-     * and the remainder.
-     */
-    numblocks = size / CRYPT_SECTORS_PER_BUFSIZE;
-    remainder = size % CRYPT_SECTORS_PER_BUFSIZE;
-    tot_numblocks = tot_size / CRYPT_SECTORS_PER_BUFSIZE;
-    blocks_already_done = *size_already_done / CRYPT_SECTORS_PER_BUFSIZE;
-
-    printf("Encrypting filesystem in place...");
-
-    i = previously_encrypted_upto + 1 - *size_already_done;
-
-    if (lseek64(realfd, i * CRYPT_SECTOR_SIZE, SEEK_SET) < 0) {
-        printf("Cannot seek to previously encrypted point on %s", real_blkdev);
-        goto errout;
-    }
-
-    if (lseek64(cryptofd, i * CRYPT_SECTOR_SIZE, SEEK_SET) < 0) {
-        printf("Cannot seek to previously encrypted point on %s", crypto_blkdev);
-        goto errout;
-    }
-
-    for (;i < size && i % CRYPT_SECTORS_PER_BUFSIZE != 0; ++i) {
-        if (unix_read(realfd, buf, CRYPT_SECTOR_SIZE) <= 0) {
-            printf("Error reading initial sectors from real_blkdev %s for "
-                  "inplace encrypt\n", crypto_blkdev);
-            goto errout;
-        }
-        if (unix_write(cryptofd, buf, CRYPT_SECTOR_SIZE) <= 0) {
-            printf("Error writing initial sectors to crypto_blkdev %s for "
-                  "inplace encrypt\n", crypto_blkdev);
-            goto errout;
-        } else {
-            printf("Encrypted 1 block at %" PRId64, i);
-        }
-    }
-
-    one_pct = tot_numblocks / 100;
-    cur_pct = 0;
-    /* process the majority of the filesystem in blocks */
-    for (i/=CRYPT_SECTORS_PER_BUFSIZE; i<numblocks; i++) {
-        new_pct = (i + blocks_already_done) / one_pct;
-        if (new_pct > cur_pct) {
-            char buf[8];
-
-            cur_pct = new_pct;
-            snprintf(buf, sizeof(buf), "%" PRId64, cur_pct);
-            property_set("vold.encrypt_progress", buf);
-        }
-        if (unix_read(realfd, buf, CRYPT_INPLACE_BUFSIZE) <= 0) {
-            printf("Error reading real_blkdev %s for inplace encrypt", crypto_blkdev);
-            goto errout;
-        }
-        if (unix_write(cryptofd, buf, CRYPT_INPLACE_BUFSIZE) <= 0) {
-            printf("Error writing crypto_blkdev %s for inplace encrypt", crypto_blkdev);
-            goto errout;
-        } else {
-            printf("Encrypted %d block at %" PRId64,
-                  CRYPT_SECTORS_PER_BUFSIZE,
-                  i * CRYPT_SECTORS_PER_BUFSIZE);
-        }
-
-       if (1) {
-            printf("Stopping encryption due to low battery");
-            *size_already_done += (i + 1) * CRYPT_SECTORS_PER_BUFSIZE - 1;
-            rc = 0;
-            goto errout;
-        }
-    }
-
-    /* Do any remaining sectors */
-    for (i=0; i<remainder; i++) {
-        if (unix_read(realfd, buf, CRYPT_SECTOR_SIZE) <= 0) {
-            printf("Error reading final sectors from real_blkdev %s for inplace encrypt", crypto_blkdev);
-            goto errout;
-        }
-        if (unix_write(cryptofd, buf, CRYPT_SECTOR_SIZE) <= 0) {
-            printf("Error writing final sectors to crypto_blkdev %s for inplace encrypt", crypto_blkdev);
-            goto errout;
-        } else {
-            printf("Encrypted 1 block at next location");
-        }
-    }
-
-    *size_already_done += size;
-    rc = 0;
-
-errout:
-    close(realfd);
-    close(cryptofd);
-
-    return rc;
-}
-
-/* returns on of the ENABLE_INPLACE_* return codes */
-static int cryptfs_enable_inplace(char *crypto_blkdev, char *real_blkdev,
-                                  off64_t size, off64_t *size_already_done,
-                                  off64_t tot_size,
-                                  off64_t previously_encrypted_upto)
-{
-    int rc_ext4, rc_f2fs, rc_full;
-    if (previously_encrypted_upto) {
-        printf("Continuing encryption from %" PRId64, previously_encrypted_upto);
-    }
-
-    if (*size_already_done + size < previously_encrypted_upto) {
-        *size_already_done += size;
-        return 0;
-    }
-
-    /* TODO: identify filesystem type.
-     * As is, cryptfs_enable_inplace_ext4 will fail on an f2fs partition, and
-     * then we will drop down to cryptfs_enable_inplace_f2fs.
-     * */
-    if ((rc_ext4 = cryptfs_enable_inplace_ext4(crypto_blkdev, real_blkdev,
-                                size, size_already_done,
-                                tot_size, previously_encrypted_upto)) == 0) {
-      return 0;
-    }
-    printf("cryptfs_enable_inplace_ext4()=%d\n", rc_ext4);
-
-    if ((rc_f2fs = cryptfs_enable_inplace_f2fs(crypto_blkdev, real_blkdev,
-                                size, size_already_done,
-                                tot_size, previously_encrypted_upto)) == 0) {
-      return 0;
-    }
-    printf("cryptfs_enable_inplace_f2fs()=%d\n", rc_f2fs);
-
-    rc_full = cryptfs_enable_inplace_full(crypto_blkdev, real_blkdev,
-                                       size, size_already_done, tot_size,
-                                       previously_encrypted_upto);
-    printf("cryptfs_enable_inplace_full()=%d\n", rc_full);
-
-    /* Hack for b/17898962, the following is the symptom... */
-    if (rc_ext4 == ENABLE_INPLACE_ERR_DEV
-        && rc_f2fs == ENABLE_INPLACE_ERR_DEV
-        && rc_full == ENABLE_INPLACE_ERR_DEV) {
-            return ENABLE_INPLACE_ERR_DEV;
-    }
-    return rc_full;
-}
-
-#define CRYPTO_ENABLE_WIPE 1
-#define CRYPTO_ENABLE_INPLACE 2
-
-#define FRAMEWORK_BOOT_WAIT 60
-
-static inline int should_encrypt(struct volume_info *volume)
-{
-    return (volume->flags & (VOL_ENCRYPTABLE | VOL_NONREMOVABLE)) ==
-            (VOL_ENCRYPTABLE | VOL_NONREMOVABLE);
-}
-
-static int cryptfs_SHA256_fileblock(const char* filename, __le8* buf)
-{
-    int fd = open(filename, O_RDONLY);
-    if (fd == -1) {
-        printf("Error opening file %s", filename);
-        return -1;
-    }
-
-    char block[CRYPT_INPLACE_BUFSIZE];
-    memset(block, 0, sizeof(block));
-    if (unix_read(fd, block, sizeof(block)) < 0) {
-        printf("Error reading file %s", filename);
-        close(fd);
-        return -1;
-    }
-
-    close(fd);
-
-    SHA256_CTX c;
-    SHA256_Init(&c);
-    SHA256_Update(&c, block, sizeof(block));
-    SHA256_Final(buf, &c);
-
-    return 0;
-}
-
-static int get_fs_type(struct fstab_rec *rec)
-{
-    if (!strcmp(rec->fs_type, "ext4")) {
-        return EXT4_FS;
-    } else if (!strcmp(rec->fs_type, "f2fs")) {
-        return F2FS_FS;
-    } else {
-        return -1;
-    }
-}
-
-static int cryptfs_enable_all_volumes(struct crypt_mnt_ftr *crypt_ftr, int how,
-                                      char *crypto_blkdev, char *real_blkdev,
-                                      int previously_encrypted_upto)
-{
-    off64_t cur_encryption_done=0, tot_encryption_size=0;
-    int i, rc = -1;
-
-    if (1) {
-        printf("Not starting encryption due to low battery");
-        return 0;
-    }
-
-    /* The size of the userdata partition, and add in the vold volumes below */
-    tot_encryption_size = crypt_ftr->fs_size;
-
-    if (how == CRYPTO_ENABLE_WIPE) {
-        struct fstab_rec* rec = fs_mgr_get_entry_for_mount_point(fstab, DATA_MNT_POINT);
-        int fs_type = get_fs_type(rec);
-        if (fs_type < 0) {
-            printf("cryptfs_enable: unsupported fs type %s\n", rec->fs_type);
-            return -1;
-        }
-        rc = cryptfs_enable_wipe(crypto_blkdev, crypt_ftr->fs_size, fs_type);
-    } else if (how == CRYPTO_ENABLE_INPLACE) {
-        rc = cryptfs_enable_inplace(crypto_blkdev, real_blkdev,
-                                    crypt_ftr->fs_size, &cur_encryption_done,
-                                    tot_encryption_size,
-                                    previously_encrypted_upto);
-
-        if (rc == ENABLE_INPLACE_ERR_DEV) {
-            /* Hack for b/17898962 */
-            printf("cryptfs_enable: crypto block dev failure. Must reboot...\n");
-            cryptfs_reboot(reboot);
-        }
-
-        if (!rc) {
-            crypt_ftr->encrypted_upto = cur_encryption_done;
-        }
-
-        if (!rc && crypt_ftr->encrypted_upto == crypt_ftr->fs_size) {
-            /* The inplace routine never actually sets the progress to 100% due
-             * to the round down nature of integer division, so set it here */
-            property_set("vold.encrypt_progress", "100");
-        }
-    } else {
-        /* Shouldn't happen */
-        printf("cryptfs_enable: internal error, unknown option\n");
-        rc = -1;
-    }
-
-    return rc;
-}
-
-int cryptfs_enable_internal(char *howarg, int crypt_type, char *passwd,
-                            int allow_reboot)
-{
-    int how = 0;
-    char crypto_blkdev[MAXPATHLEN], real_blkdev[MAXPATHLEN];
-    unsigned long nr_sec;
-    unsigned char decrypted_master_key[KEY_LEN_BYTES];
-    int rc=-1, fd, i, ret;
-    struct crypt_mnt_ftr crypt_ftr;
-    struct crypt_persist_data *pdata;
-    char encrypted_state[PROPERTY_VALUE_MAX];
-    char lockid[32] = { 0 };
-    char key_loc[PROPERTY_VALUE_MAX];
-    char fuse_sdcard[PROPERTY_VALUE_MAX];
-    char *sd_mnt_point;
-    int num_vols;
-    struct volume_info *vol_list = 0;
-    off64_t previously_encrypted_upto = 0;
-printf("cryptfs_enable_internal disabled by TWRP\n");
-return -1;
-    if (!strcmp(howarg, "wipe")) {
-      how = CRYPTO_ENABLE_WIPE;
-    } else if (! strcmp(howarg, "inplace")) {
-      how = CRYPTO_ENABLE_INPLACE;
-    } else {
-      /* Shouldn't happen, as CommandListener vets the args */
-      goto error_unencrypted;
-    }
-
-    /* See if an encryption was underway and interrupted */
-    if (how == CRYPTO_ENABLE_INPLACE
-          && get_crypt_ftr_and_key(&crypt_ftr) == 0
-          && (crypt_ftr.flags & CRYPT_ENCRYPTION_IN_PROGRESS)) {
-        previously_encrypted_upto = crypt_ftr.encrypted_upto;
-        crypt_ftr.encrypted_upto = 0;
-        crypt_ftr.flags &= ~CRYPT_ENCRYPTION_IN_PROGRESS;
-
-        /* At this point, we are in an inconsistent state. Until we successfully
-           complete encryption, a reboot will leave us broken. So mark the
-           encryption failed in case that happens.
-           On successfully completing encryption, remove this flag */
-        crypt_ftr.flags |= CRYPT_INCONSISTENT_STATE;
-
-        put_crypt_ftr_and_key(&crypt_ftr);
-    }
-
-    property_get("ro.crypto.state", encrypted_state, "");
-    if (!strcmp(encrypted_state, "encrypted") && !previously_encrypted_upto) {
-        printf("Device is already running encrypted, aborting");
-        goto error_unencrypted;
-    }
-
-    // TODO refactor fs_mgr_get_crypt_info to get both in one call
-    fs_mgr_get_crypt_info(fstab, key_loc, 0, sizeof(key_loc));
-    fs_mgr_get_crypt_info(fstab, 0, real_blkdev, sizeof(real_blkdev));
-
-    /* Get the size of the real block device */
-    fd = open(real_blkdev, O_RDONLY);
-    if ( (nr_sec = get_blkdev_size(fd)) == 0) {
-        printf("Cannot get size of block device %s\n", real_blkdev);
-        goto error_unencrypted;
-    }
-    close(fd);
-
-    /* If doing inplace encryption, make sure the orig fs doesn't include the crypto footer */
-    if ((how == CRYPTO_ENABLE_INPLACE) && (!strcmp(key_loc, KEY_IN_FOOTER))) {
-        unsigned int fs_size_sec, max_fs_size_sec;
-        fs_size_sec = get_fs_size(real_blkdev);
-        if (fs_size_sec == 0)
-            fs_size_sec = get_f2fs_filesystem_size_sec(real_blkdev);
-
-        max_fs_size_sec = nr_sec - (CRYPT_FOOTER_OFFSET / CRYPT_SECTOR_SIZE);
-
-        if (fs_size_sec > max_fs_size_sec) {
-            printf("Orig filesystem overlaps crypto footer region.  Cannot encrypt in place.");
-            goto error_unencrypted;
-        }
-    }
-
-    /* Get a wakelock as this may take a while, and we don't want the
-     * device to sleep on us.  We'll grab a partial wakelock, and if the UI
-     * wants to keep the screen on, it can grab a full wakelock.
-     */
-    snprintf(lockid, sizeof(lockid), "enablecrypto%d", (int) getpid());
-    acquire_wake_lock(PARTIAL_WAKE_LOCK, lockid);
-
-    /* Get the sdcard mount point */
-    sd_mnt_point = getenv("EMULATED_STORAGE_SOURCE");
-    if (!sd_mnt_point) {
-       sd_mnt_point = getenv("EXTERNAL_STORAGE");
-    }
-    if (!sd_mnt_point) {
-        sd_mnt_point = "/mnt/sdcard";
-    }
-
-    /* TODO
-     * Currently do not have test devices with multiple encryptable volumes.
-     * When we acquire some, re-add support.
-     */
-    num_vols=0/*vold_getNumDirectVolumes()*/;
-    vol_list = malloc(sizeof(struct volume_info) * num_vols);
-    //vold_getDirectVolumeList(vol_list);
-
-    for (i=0; i<num_vols; i++) {
-        if (should_encrypt(&vol_list[i])) {
-            printf("Cannot encrypt if there are multiple encryptable volumes"
-                  "%s\n", vol_list[i].label);
-            goto error_unencrypted;
-        }
-    }
-
-    /* The init files are setup to stop the class main and late start when
-     * vold sets trigger_shutdown_framework.
-     */
-    property_set("vold.decrypt", "trigger_shutdown_framework");
-    printf("Just asked init to shut down class main\n");
-
-    if (1 /*vold_unmountAllAsecs()*/) {
-        /* Just report the error.  If any are left mounted,
-         * umounting /data below will fail and handle the error.
-         */
-        printf("Error unmounting internal asecs");
-    }
-
-    property_get("ro.crypto.fuse_sdcard", fuse_sdcard, "");
-    if (!strcmp(fuse_sdcard, "true")) {
-        /* This is a device using the fuse layer to emulate the sdcard semantics
-         * on top of the userdata partition.  vold does not manage it, it is managed
-         * by the sdcard service.  The sdcard service was killed by the property trigger
-         * above, so just unmount it now.  We must do this _AFTER_ killing the framework,
-         * unlike the case for vold managed devices above.
-         */
-        if (wait_and_unmount(sd_mnt_point, false)) {
-            goto error_shutting_down;
-        }
-    }
-
-    /* Now unmount the /data partition. */
-    if (wait_and_unmount(DATA_MNT_POINT, false)) {
-        if (allow_reboot) {
-            goto error_shutting_down;
-        } else {
-            goto error_unencrypted;
-        }
-    }
-
-    /* Do extra work for a better UX when doing the long inplace encryption */
-    if (how == CRYPTO_ENABLE_INPLACE) {
-        /* Now that /data is unmounted, we need to mount a tmpfs
-         * /data, set a property saying we're doing inplace encryption,
-         * and restart the framework.
-         */
-        if (fs_mgr_do_tmpfs_mount(DATA_MNT_POINT)) {
-            goto error_shutting_down;
-        }
-        /* Tells the framework that inplace encryption is starting */
-        property_set("vold.encrypt_progress", "0");
-
-        /* restart the framework. */
-        /* Create necessary paths on /data */
-        if (prep_data_fs()) {
-            goto error_shutting_down;
-        }
-
-        /* Ugh, shutting down the framework is not synchronous, so until it
-         * can be fixed, this horrible hack will wait a moment for it all to
-         * shut down before proceeding.  Without it, some devices cannot
-         * restart the graphics services.
-         */
-        sleep(2);
-
-        /* startup service classes main and late_start */
-        property_set("vold.decrypt", "trigger_restart_min_framework");
-        printf("Just triggered restart_min_framework\n");
-
-        /* OK, the framework is restarted and will soon be showing a
-         * progress bar.  Time to setup an encrypted mapping, and
-         * either write a new filesystem, or encrypt in place updating
-         * the progress bar as we work.
-         */
-    }
-
-    /* Start the actual work of making an encrypted filesystem */
-    /* Initialize a crypt_mnt_ftr for the partition */
-    if (previously_encrypted_upto == 0) {
-        if (cryptfs_init_crypt_mnt_ftr(&crypt_ftr)) {
-            goto error_shutting_down;
-        }
-
-        if (!strcmp(key_loc, KEY_IN_FOOTER)) {
-            crypt_ftr.fs_size = nr_sec
-              - (CRYPT_FOOTER_OFFSET / CRYPT_SECTOR_SIZE);
-        } else {
-            crypt_ftr.fs_size = nr_sec;
-        }
-        /* At this point, we are in an inconsistent state. Until we successfully
-           complete encryption, a reboot will leave us broken. So mark the
-           encryption failed in case that happens.
-           On successfully completing encryption, remove this flag */
-        crypt_ftr.flags |= CRYPT_INCONSISTENT_STATE;
-        crypt_ftr.crypt_type = crypt_type;
-        strcpy((char *)crypt_ftr.crypto_type_name, "aes-cbc-essiv:sha256");
-
-        /* Make an encrypted master key */
-        if (create_encrypted_random_key(passwd, crypt_ftr.master_key, crypt_ftr.salt, &crypt_ftr)) {
-            printf("Cannot create encrypted master key\n");
-            goto error_shutting_down;
-        }
-
-        /* Write the key to the end of the partition */
-        put_crypt_ftr_and_key(&crypt_ftr);
-
-        /* If any persistent data has been remembered, save it.
-         * If none, create a valid empty table and save that.
-         */
-        if (!persist_data) {
-           pdata = malloc(CRYPT_PERSIST_DATA_SIZE);
-           if (pdata) {
-               init_empty_persist_data(pdata, CRYPT_PERSIST_DATA_SIZE);
-               persist_data = pdata;
-           }
-        }
-        if (persist_data) {
-            save_persistent_data();
-        }
-    }
-
-    decrypt_master_key(passwd, decrypted_master_key, &crypt_ftr, 0, 0);
-    create_crypto_blk_dev(&crypt_ftr, decrypted_master_key, real_blkdev, crypto_blkdev,
-                          "userdata");
-
-    /* If we are continuing, check checksums match */
-    rc = 0;
-    if (previously_encrypted_upto) {
-        __le8 hash_first_block[SHA256_DIGEST_LENGTH];
-        rc = cryptfs_SHA256_fileblock(crypto_blkdev, hash_first_block);
-
-        if (!rc && memcmp(hash_first_block, crypt_ftr.hash_first_block,
-                          sizeof(hash_first_block)) != 0) {
-            printf("Checksums do not match - trigger wipe");
-            rc = -1;
-        }
-    }
-
-    if (!rc) {
-        rc = cryptfs_enable_all_volumes(&crypt_ftr, how,
-                                        crypto_blkdev, real_blkdev,
-                                        previously_encrypted_upto);
-    }
-
-    /* Calculate checksum if we are not finished */
-    if (!rc && crypt_ftr.encrypted_upto != crypt_ftr.fs_size) {
-        rc = cryptfs_SHA256_fileblock(crypto_blkdev,
-                                      crypt_ftr.hash_first_block);
-        if (rc) {
-            printf("Error calculating checksum for continuing encryption");
-            rc = -1;
-        }
-    }
-
-    /* Undo the dm-crypt mapping whether we succeed or not */
-    delete_crypto_blk_dev("userdata");
-
-    free(vol_list);
-
-    if (! rc) {
-        /* Success */
-        crypt_ftr.flags &= ~CRYPT_INCONSISTENT_STATE;
-
-        if (crypt_ftr.encrypted_upto != crypt_ftr.fs_size) {
-            printf("Encrypted up to sector %lld - will continue after reboot",
-                  crypt_ftr.encrypted_upto);
-            crypt_ftr.flags |= CRYPT_ENCRYPTION_IN_PROGRESS;
-        }
-
-        put_crypt_ftr_and_key(&crypt_ftr);
-
-        if (crypt_ftr.encrypted_upto == crypt_ftr.fs_size) {
-          char value[PROPERTY_VALUE_MAX];
-          property_get("ro.crypto.state", value, "");
-          if (!strcmp(value, "")) {
-            /* default encryption - continue first boot sequence */
-            property_set("ro.crypto.state", "encrypted");
-            release_wake_lock(lockid);
-            cryptfs_check_passwd(DEFAULT_PASSWORD);
-            cryptfs_restart_internal(1);
-            return 0;
-          } else {
-            sleep(2); /* Give the UI a chance to show 100% progress */
-            cryptfs_reboot(reboot);
-          }
-        } else {
-            sleep(2); /* Partially encrypted, ensure writes flushed to ssd */
-            cryptfs_reboot(shutdown);
-        }
-    } else {
-        char value[PROPERTY_VALUE_MAX];
-
-        property_get("ro.vold.wipe_on_crypt_fail", value, "0");
-        if (!strcmp(value, "1")) {
-            /* wipe data if encryption failed */
-            printf("encryption failed - rebooting into recovery to wipe data\n");
-            mkdir("/cache/recovery", 0700);
-            int fd = open("/cache/recovery/command", O_RDWR|O_CREAT|O_TRUNC, 0600);
-            if (fd >= 0) {
-                write(fd, "--wipe_data\n", strlen("--wipe_data\n") + 1);
-                write(fd, "--reason=cryptfs_enable_internal\n", strlen("--reason=cryptfs_enable_internal\n") + 1);
-                close(fd);
-            } else {
-                printf("could not open /cache/recovery/command\n");
-            }
-            cryptfs_reboot(recovery);
-        } else {
-            /* set property to trigger dialog */
-            property_set("vold.encrypt_progress", "error_partially_encrypted");
-            release_wake_lock(lockid);
-        }
-        return -1;
-    }
-
-    /* hrm, the encrypt step claims success, but the reboot failed.
-     * This should not happen.
-     * Set the property and return.  Hope the framework can deal with it.
-     */
-    property_set("vold.encrypt_progress", "error_reboot_failed");
-    release_wake_lock(lockid);
-    return rc;
-
-error_unencrypted:
-    free(vol_list);
-    property_set("vold.encrypt_progress", "error_not_encrypted");
-    if (lockid[0]) {
-        release_wake_lock(lockid);
-    }
-    return -1;
-
-error_shutting_down:
-    /* we failed, and have not encrypted anthing, so the users's data is still intact,
-     * but the framework is stopped and not restarted to show the error, so it's up to
-     * vold to restart the system.
-     */
-    printf("Error enabling encryption after framework is shutdown, no data changed, restarting system");
-    cryptfs_reboot(reboot);
-
-    /* shouldn't get here */
-    property_set("vold.encrypt_progress", "error_shutting_down");
-    free(vol_list);
-    if (lockid[0]) {
-        release_wake_lock(lockid);
-    }
-    return -1;
-}
-
-int cryptfs_enable(char *howarg, int type, char *passwd, int allow_reboot)
-{
-    char* adjusted_passwd = adjust_passwd(passwd);
-    if (adjusted_passwd) {
-        passwd = adjusted_passwd;
-    }
-
-    int rc = cryptfs_enable_internal(howarg, type, passwd, allow_reboot);
-
-    free(adjusted_passwd);
-    return rc;
-}
-
-int cryptfs_enable_default(char *howarg, int allow_reboot)
-{
-    return cryptfs_enable_internal(howarg, CRYPT_TYPE_DEFAULT,
-                          DEFAULT_PASSWORD, allow_reboot);
-}
-
-int cryptfs_changepw(int crypt_type, const char *newpw)
-{
-    struct crypt_mnt_ftr crypt_ftr;
-    unsigned char decrypted_master_key[KEY_LEN_BYTES];
-
-    /* This is only allowed after we've successfully decrypted the master key */
-    if (!master_key_saved) {
-        printf("Key not saved, aborting");
-        return -1;
-    }
-
-    if (crypt_type < 0 || crypt_type > CRYPT_TYPE_MAX_TYPE) {
-        printf("Invalid crypt_type %d", crypt_type);
-        return -1;
-    }
-
-    /* get key */
-    if (get_crypt_ftr_and_key(&crypt_ftr)) {
-        printf("Error getting crypt footer and key");
-        return -1;
-    }
-
-    crypt_ftr.crypt_type = crypt_type;
-
-    char* adjusted_passwd = adjust_passwd(newpw);
-    if (adjusted_passwd) {
-        newpw = adjusted_passwd;
-    }
-
-    encrypt_master_key(crypt_type == CRYPT_TYPE_DEFAULT ? DEFAULT_PASSWORD
-                                                        : newpw,
-                       crypt_ftr.salt,
-                       saved_master_key,
-                       crypt_ftr.master_key,
-                       &crypt_ftr);
-
-    /* save the key */
-    put_crypt_ftr_and_key(&crypt_ftr);
-
-    free(adjusted_passwd);
-    return 0;
-}
-
-static int persist_get_key(char *fieldname, char *value)
-{
-    unsigned int i;
-
-    if (persist_data == NULL) {
-        return -1;
-    }
-    for (i = 0; i < persist_data->persist_valid_entries; i++) {
-        if (!strncmp(persist_data->persist_entry[i].key, fieldname, PROPERTY_KEY_MAX)) {
-            /* We found it! */
-            strlcpy(value, persist_data->persist_entry[i].val, PROPERTY_VALUE_MAX);
-            return 0;
-        }
-    }
-
-    return -1;
-}
-
-static int persist_set_key(char *fieldname, char *value, int encrypted)
-{
-    unsigned int i;
-    unsigned int num;
-    struct crypt_mnt_ftr crypt_ftr;
-    unsigned int max_persistent_entries;
-    unsigned int dsize;
-
-    if (persist_data == NULL) {
-        return -1;
-    }
-
-    /* If encrypted, use the values from the crypt_ftr, otherwise
-     * use the values for the current spec.
-     */
-    if (encrypted) {
-        if(get_crypt_ftr_and_key(&crypt_ftr)) {
-            return -1;
-        }
-        dsize = crypt_ftr.persist_data_size;
-    } else {
-        dsize = CRYPT_PERSIST_DATA_SIZE;
-    }
-    max_persistent_entries = (dsize - sizeof(struct crypt_persist_data)) /
-                             sizeof(struct crypt_persist_entry);
-
-    num = persist_data->persist_valid_entries;
-
-    for (i = 0; i < num; i++) {
-        if (!strncmp(persist_data->persist_entry[i].key, fieldname, PROPERTY_KEY_MAX)) {
-            /* We found an existing entry, update it! */
-            memset(persist_data->persist_entry[i].val, 0, PROPERTY_VALUE_MAX);
-            strlcpy(persist_data->persist_entry[i].val, value, PROPERTY_VALUE_MAX);
-            return 0;
-        }
-    }
-
-    /* We didn't find it, add it to the end, if there is room */
-    if (persist_data->persist_valid_entries < max_persistent_entries) {
-        memset(&persist_data->persist_entry[num], 0, sizeof(struct crypt_persist_entry));
-        strlcpy(persist_data->persist_entry[num].key, fieldname, PROPERTY_KEY_MAX);
-        strlcpy(persist_data->persist_entry[num].val, value, PROPERTY_VALUE_MAX);
-        persist_data->persist_valid_entries++;
-        return 0;
-    }
-
-    return -1;
-}
-
-/* Return the value of the specified field. */
-int cryptfs_getfield(char *fieldname, char *value, int len)
-{
-    char temp_value[PROPERTY_VALUE_MAX];
-    char real_blkdev[MAXPATHLEN];
-    /* 0 is success, 1 is not encrypted,
-     * -1 is value not set, -2 is any other error
-     */
-    int rc = -2;
-
-    if (persist_data == NULL) {
-        load_persistent_data();
-        if (persist_data == NULL) {
-            printf("Getfield error, cannot load persistent data");
-            goto out;
-        }
-    }
-
-    if (!persist_get_key(fieldname, temp_value)) {
-        /* We found it, copy it to the caller's buffer and return */
-        strlcpy(value, temp_value, len);
-        rc = 0;
-    } else {
-        /* Sadness, it's not there.  Return the error */
-        rc = -1;
-    }
-
-out:
-    return rc;
-}
-
-/* Set the value of the specified field. */
-int cryptfs_setfield(char *fieldname, char *value)
-{
-    struct crypt_persist_data stored_pdata;
-    struct crypt_persist_data *pdata_p;
-    struct crypt_mnt_ftr crypt_ftr;
-    char encrypted_state[PROPERTY_VALUE_MAX];
-    /* 0 is success, -1 is an error */
-    int rc = -1;
-    int encrypted = 0;
-
-    if (persist_data == NULL) {
-        load_persistent_data();
-        if (persist_data == NULL) {
-            printf("Setfield error, cannot load persistent data");
-            goto out;
-        }
-    }
-
-    property_get("ro.crypto.state", encrypted_state, "");
-    if (!strcmp(encrypted_state, "encrypted") ) {
-        encrypted = 1;
-    }
-
-    if (persist_set_key(fieldname, value, encrypted)) {
-        goto out;
-    }
-
-    /* If we are running encrypted, save the persistent data now */
-    if (encrypted) {
-        if (save_persistent_data()) {
-            printf("Setfield error, cannot save persistent data");
-            goto out;
-        }
-    }
-
-    rc = 0;
-
-out:
-    return rc;
-}
-
-/* Checks userdata. Attempt to mount the volume if default-
- * encrypted.
- * On success trigger next init phase and return 0.
- * Currently do not handle failure - see TODO below.
- */
-int cryptfs_mount_default_encrypted(void)
-{
-    char decrypt_state[PROPERTY_VALUE_MAX];
-    property_get("vold.decrypt", decrypt_state, "0");
-    if (!strcmp(decrypt_state, "0")) {
-        printf("Not encrypted - should not call here");
-    } else {
-        int crypt_type = cryptfs_get_password_type();
-        if (crypt_type < 0 || crypt_type > CRYPT_TYPE_MAX_TYPE) {
-            printf("Bad crypt type - error");
-        } else if (crypt_type != CRYPT_TYPE_DEFAULT) {
-            printf("Password is not default - "
-                  "starting min framework to prompt");
-            property_set("vold.decrypt", "trigger_restart_min_framework");
-            return 0;
-        } else if (cryptfs_check_passwd(DEFAULT_PASSWORD) == 0) {
-            printf("Password is default - restarting filesystem");
-            cryptfs_restart_internal(0);
-            return 0;
-        } else {
-            printf("Encrypted, default crypt type but can't decrypt");
-        }
-    }
-
-    /** Corrupt. Allow us to boot into framework, which will detect bad
-        crypto when it calls do_crypto_complete, then do a factory reset
-     */
-    property_set("vold.decrypt", "trigger_restart_min_framework");
-    return 0;
-}
-
 /* Returns type of the password, default, pattern, pin or password.
  */
 int cryptfs_get_password_type(void)
 {
     struct crypt_mnt_ftr crypt_ftr;
-    char fstab_filename[PROPERTY_VALUE_MAX + sizeof(FSTAB_PREFIX)];
-    char propbuf[PROPERTY_VALUE_MAX];
-
-    property_get("ro.hardware", propbuf, "");
-    snprintf(fstab_filename, sizeof(fstab_filename), FSTAB_PREFIX"%s", propbuf);
-
-    fstab = fs_mgr_read_fstab(fstab_filename);
-    if (!fstab) {
-        printf("failed to open %s\n", fstab_filename);
-        return -1;
-    }
 
     if (get_crypt_ftr_and_key(&crypt_ftr)) {
         printf("Error getting crypt footer and key\n");
@@ -3595,26 +1445,3 @@ int cryptfs_get_password_type(void)
 
     return crypt_ftr.crypt_type;
 }
-
-char* cryptfs_get_password()
-{
-    struct timespec now;
-    clock_gettime(CLOCK_MONOTONIC, &now);
-    if (now.tv_sec < password_expiry_time) {
-        return password;
-    } else {
-        cryptfs_clear_password();
-        return 0;
-    }
-}
-
-void cryptfs_clear_password()
-{
-    if (password) {
-        size_t len = strlen(password);
-        memset(password, 0, len);
-        free(password);
-        password = 0;
-        password_expiry_time = 0;
-    }
-}
diff --git a/crypto/lollipop/cryptfs.h b/crypto/lollipop/cryptfs.h
index b95a290cf..8cb8a7a32 100644
--- a/crypto/lollipop/cryptfs.h
+++ b/crypto/lollipop/cryptfs.h
@@ -208,24 +208,11 @@ extern "C" {
   typedef int (*kdf_func)(const char *passwd, const unsigned char *salt,
                           unsigned char *ikey, void *params);
 
-  int cryptfs_crypto_complete(void);
-  int cryptfs_check_footer(void);
+  void set_partition_data(const char* block_device, const char* key_location, const char* fs);
+  int cryptfs_check_footer();
   int cryptfs_check_passwd(char *pw);
   int cryptfs_verify_passwd(char *newpw);
-  int cryptfs_restart(void);
-  int cryptfs_enable(char *flag, int type, char *passwd, int allow_reboot);
-  int cryptfs_changepw(int type, const char *newpw);
-  int cryptfs_enable_default(char *flag, int allow_reboot);
-  int cryptfs_setup_volume(const char *label, int major, int minor,
-                           char *crypto_dev_path, unsigned int max_pathlen,
-                           int *new_major, int *new_minor);
-  int cryptfs_revert_volume(const char *label);
-  int cryptfs_getfield(char *fieldname, char *value, int len);
-  int cryptfs_setfield(char *fieldname, char *value);
-  int cryptfs_mount_default_encrypted(void);
   int cryptfs_get_password_type(void);
-  char* cryptfs_get_password(void);
-  void cryptfs_clear_password(void);
 #ifdef __cplusplus
 }
 #endif
diff --git a/crypto/scrypt/Android.mk b/crypto/scrypt/Android.mk
index a427de655..4514f9467 100644
--- a/crypto/scrypt/Android.mk
+++ b/crypto/scrypt/Android.mk
@@ -1,5 +1,4 @@
 LOCAL_PATH := $(call my-dir)
-#include $(call all-named-subdir-makefiles,tests)
 
 # Enable to be able to use ALOG* with #include "cutils/log.h"
 #log_c_includes += system/core/include
@@ -10,3 +9,5 @@ LOCAL_PATH := $(call my-dir)
 # that import_openssl.sh import won't remove them.
 include $(LOCAL_PATH)/build-config.mk
 include $(LOCAL_PATH)/Scrypt.mk
+
+include $(LOCAL_PATH)/tests/Android.mk
diff --git a/crypto/scrypt/Scrypt-config.mk b/crypto/scrypt/Scrypt-config.mk
index c0b00d873..bbe10631e 100644
--- a/crypto/scrypt/Scrypt-config.mk
+++ b/crypto/scrypt/Scrypt-config.mk
@@ -77,7 +77,7 @@ target_arch := unknown_arch
 endif
 
 target_c_flags    := $(common_c_flags) $($(target_arch)_c_flags) $(local_c_flags)
-target_c_includes := $(addprefix $(commands_recovery_local_path)/crypto/scrypt/,$(common_c_includes)) $(local_c_includes)
+target_c_includes := $(addprefix external/scrypt/,$(common_c_includes)) $(local_c_includes)
 target_src_files  := $(common_src_files) $($(target_arch)_src_files)
 target_src_files  := $(filter-out $($(target_arch)_exclude_files), $(target_src_files))
 
@@ -97,7 +97,7 @@ host_arch := unknown_arch
 endif
 
 host_c_flags    := $(common_c_flags) $($(host_arch)_c_flags) $(local_c_flags)
-host_c_includes := $(addprefix $(commands_recovery_local_path)/crypto/scrypt/,$(common_c_includes)) $(local_c_includes)
+host_c_includes := $(addprefix external/scrypt/,$(common_c_includes)) $(local_c_includes)
 host_src_files  := $(common_src_files) $($(host_arch)_src_files)
 host_src_files  := $(filter-out $($(host_arch)_exclude_files), $(host_src_files))
 
diff --git a/crypto/scrypt/tests/Android.mk b/crypto/scrypt/tests/Android.mk
index 60257e0f9..07c21023d 100644
--- a/crypto/scrypt/tests/Android.mk
+++ b/crypto/scrypt/tests/Android.mk
@@ -3,6 +3,8 @@
 LOCAL_PATH:= $(call my-dir)
 include $(CLEAR_VARS)
 
+LOCAL_ADDITIONAL_DEPENDENCIES := $(LOCAL_PATH)/Android.mk
+
 LOCAL_SRC_FILES:= \
     scrypt_test.cpp
 
@@ -18,6 +20,6 @@ LOCAL_STATIC_LIBRARIES := \
     libgtest \
     libgtest_main
 
-LOCAL_MODULE := scrypt_test_twrp
+LOCAL_MODULE := scrypttwrp_test
 
 include $(BUILD_NATIVE_TEST)
diff --git a/crypto/scrypt/tests/scrypt_test.cpp b/crypto/scrypt/tests/scrypt_test.cpp
index 28334d6f5..ffb568df9 100644
--- a/crypto/scrypt/tests/scrypt_test.cpp
+++ b/crypto/scrypt/tests/scrypt_test.cpp
@@ -15,8 +15,8 @@
  */
 
 #define LOG_TAG "scrypt_test"
+#include <UniquePtr.h>
 #include <utils/Log.h>
-#include <utils/UniquePtr.h>
 
 #include <gtest/gtest.h>
 
diff --git a/partition.cpp b/partition.cpp
index 4bd545b17..123e9fa3f 100644
--- a/partition.cpp
+++ b/partition.cpp
@@ -45,21 +45,12 @@
 extern "C" {
 	#include "mtdutils/mtdutils.h"
 	#include "mtdutils/mounts.h"
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-	#include "crypto/libcrypt_samsung/include/libcrypt_samsung.h"
-#endif
 #ifdef USE_EXT4
 	#include "make_ext4fs.h"
 #endif
 
 #ifdef TW_INCLUDE_CRYPTO
-	#ifdef TW_INCLUDE_JB_CRYPTO
-		#include "crypto/jb/cryptfs.h"
-	#elif defined(TW_INCLUDE_L_CRYPTO)
-		#include "crypto/lollipop/cryptfs.h"
-	#else
-		#include "crypto/ics/cryptfs.h"
-	#endif
+	#include "crypto/lollipop/cryptfs.h"
 #endif
 }
 #ifdef HAVE_SELINUX
@@ -137,6 +128,7 @@ TWPartition::TWPartition() {
 	Can_Be_Encrypted = false;
 	Is_Encrypted = false;
 	Is_Decrypted = false;
+	Mount_To_Decrypt = false;
 	Decrypted_Block_Device = "";
 	Display_Name = "";
 	Backup_Display_Name = "";
@@ -159,9 +151,7 @@ TWPartition::TWPartition() {
 	Format_Block_Size = 0;
 	Ignore_Blkid = false;
 	Retain_Layout_Version = false;
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-	EcryptFS_Password = "";
-#endif
+	Crypto_Key_Location = "footer";
 }
 
 TWPartition::~TWPartition(void) {
@@ -289,22 +279,7 @@ bool TWPartition::Process_Fstab_Line(string Line, bool Display_Error) {
 				LOGINFO("Data already decrypted, new block device: '%s'\n", crypto_blkdev);
 			} else if (!Mount(false)) {
 				if (Is_Present) {
-#if defined(TW_INCLUDE_JB_CRYPTO) || defined(TW_INCLUDE_L_CRYPTO)
-					// No extra flags needed
-#else
-					property_set("ro.crypto.fs_type", CRYPTO_FS_TYPE);
-					property_set("ro.crypto.fs_real_blkdev", CRYPTO_REAL_BLKDEV);
-					property_set("ro.crypto.fs_mnt_point", CRYPTO_MNT_POINT);
-					property_set("ro.crypto.fs_options", CRYPTO_FS_OPTIONS);
-					property_set("ro.crypto.fs_flags", CRYPTO_FS_FLAGS);
-					property_set("ro.crypto.keyfile.userdata", CRYPTO_KEY_LOC);
-#ifdef CRYPTO_SD_FS_TYPE
-					property_set("ro.crypto.sd_fs_type", CRYPTO_SD_FS_TYPE);
-					property_set("ro.crypto.sd_fs_real_blkdev", CRYPTO_SD_REAL_BLKDEV);
-					property_set("ro.crypto.sd_fs_mnt_point", EXPAND(TW_INTERNAL_STORAGE_PATH));
-#endif
-					property_set("rw.km_fips_status", "ready");
-#endif
+					set_partition_data(Actual_Block_Device.c_str(), Crypto_Key_Location.c_str(), Fstab_File_System.c_str());
 					if (cryptfs_check_footer() == 0) {
 						Is_Encrypted = true;
 						Is_Decrypted = false;
@@ -572,6 +547,17 @@ bool TWPartition::Process_Flags(string Flags, bool Display_Error) {
 				Mount_Options.resize(Mount_Options.size() - 1);
 			}
 			Process_FS_Flags(Mount_Options, Mount_Flags);
+		} else if ((ptr_len > 12 && strncmp(ptr, "encryptable=", 12) == 0) || (ptr_len > 13 && strncmp(ptr, "forceencrypt=", 13) == 0)) {
+			ptr += 12;
+			if (*ptr == '=') ptr++;
+			if (*ptr == '\"') ptr++;
+
+			Crypto_Key_Location = ptr;
+			if (Crypto_Key_Location.substr(Crypto_Key_Location.size() - 1, 1) == "\"") {
+				Crypto_Key_Location.resize(Crypto_Key_Location.size() - 1);
+			}
+		} else if (ptr_len > 8 && strncmp(ptr, "mounttodecrypt", 14) == 0) {
+			Mount_To_Decrypt = true;
 		} else {
 			if (Display_Error)
 				LOGERR("Unhandled flag: '%s'\n", ptr);
@@ -1021,25 +1007,7 @@ bool TWPartition::Mount(bool Display_Error) {
 		}
 #endif
 	}
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-	string MetaEcfsFile = EXPAND(TW_EXTERNAL_STORAGE_PATH);
-	MetaEcfsFile += "/.MetaEcfsFile";
-	if (EcryptFS_Password.size() > 0 && PartitionManager.Mount_By_Path("/data", false) && TWFunc::Path_Exists(MetaEcfsFile)) {
-		if (mount_ecryptfs_drive(EcryptFS_Password.c_str(), Mount_Point.c_str(), Mount_Point.c_str(), 0) != 0) {
-			if (Display_Error)
-				LOGERR("Unable to mount ecryptfs for '%s'\n", Mount_Point.c_str());
-			else
-				LOGINFO("Unable to mount ecryptfs for '%s'\n", Mount_Point.c_str());
-		} else {
-			LOGINFO("Successfully mounted ecryptfs for '%s'\n", Mount_Point.c_str());
-			Is_Decrypted = true;
-		}
-	} else if (Mount_Point == EXPAND(TW_EXTERNAL_STORAGE_PATH)) {
-		if (Is_Decrypted)
-			LOGINFO("Mounting external storage, '%s' is not encrypted\n", Mount_Point.c_str());
-		Is_Decrypted = false;
-	}
-#endif
+
 	if (Removable)
 		Update_Size(Display_Error);
 
@@ -1061,19 +1029,6 @@ bool TWPartition::UnMount(bool Display_Error) {
 		if (Is_Storage)
 			TWFunc::Toggle_MTP(false);
 
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-		if (EcryptFS_Password.size() > 0) {
-			if (unmount_ecryptfs_drive(Mount_Point.c_str()) != 0) {
-				if (Display_Error)
-					LOGERR("Unable to unmount ecryptfs for '%s'\n", Mount_Point.c_str());
-				else
-					LOGINFO("Unable to unmount ecryptfs for '%s'\n", Mount_Point.c_str());
-			} else {
-				LOGINFO("Successfully unmounted ecryptfs for '%s'\n", Mount_Point.c_str());
-			}
-		}
-#endif
-
 		if (!Symlink_Mount_Point.empty())
 			umount(Symlink_Mount_Point.c_str());
 
@@ -1105,13 +1060,6 @@ bool TWPartition::Wipe(string New_File_System) {
 	if (Mount_Point == "/cache")
 		Log_Offset = 0;
 
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-	if (Mount_Point == "/data" && Mount(false)) {
-		if (TWFunc::Path_Exists("/data/system/edk_p_sd"))
-			TWFunc::copy_file("/data/system/edk_p_sd", "/tmp/edk_p_sd", 0600);
-	}
-#endif
-
 	if (Retain_Layout_Version && Mount(false) && TWFunc::Path_Exists(Layout_Filename))
 		TWFunc::copy_file(Layout_Filename, "/.layout_version", 0600);
 	else
@@ -1150,15 +1098,6 @@ bool TWPartition::Wipe(string New_File_System) {
 	}
 
 	if (wiped) {
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-		if (Mount_Point == "/data" && Mount(false)) {
-			if (TWFunc::Path_Exists("/tmp/edk_p_sd")) {
-				Make_Dir("/data/system", true);
-				TWFunc::copy_file("/tmp/edk_p_sd", "/data/system/edk_p_sd", 0600);
-			}
-		}
-#endif
-
 		if (Mount_Point == "/cache")
 			DataManager::Output_Version();
 
diff --git a/partitionmanager.cpp b/partitionmanager.cpp
index c3b10ac58..93caf20ac 100644
--- a/partitionmanager.cpp
+++ b/partitionmanager.cpp
@@ -49,13 +49,7 @@ extern "C" {
 }
 
 #ifdef TW_INCLUDE_CRYPTO
-	#ifdef TW_INCLUDE_JB_CRYPTO
-		#include "crypto/jb/cryptfs.h"
-	#elif defined(TW_INCLUDE_L_CRYPTO)
-		#include "crypto/lollipop/cryptfs.h"
-	#else
-		#include "crypto/ics/cryptfs.h"
-	#endif
+	#include "crypto/lollipop/cryptfs.h"
 #endif
 
 extern bool datamedia;
@@ -139,7 +133,7 @@ int TWPartitionManager::Process_Fstab(string Fstab_Filename, bool Display_Error)
 	if (settings_partition) {
 		Setup_Settings_Storage_Partition(settings_partition);
 	}
-#ifdef TW_INCLUDE_L_CRYPTO
+#ifdef TW_INCLUDE_CRYPTO
 	TWPartition* Decrypt_Data = Find_Partition_By_Path("/data");
 	if (Decrypt_Data && Decrypt_Data->Is_Encrypted && !Decrypt_Data->Is_Decrypted) {
 		int password_type = cryptfs_get_password_type();
@@ -261,6 +255,8 @@ void TWPartitionManager::Output_Partition(TWPartition* Part) {
 		printf("Ignore_Blkid ");
 	if (Part->Retain_Layout_Version)
 		printf("Retain_Layout_Version ");
+	if (Part->Mount_To_Decrypt)
+		printf("Mount_To_Decrypt ");
 	printf("\n");
 	if (!Part->SubPartition_Of.empty())
 		printf("   SubPartition_Of: %s\n", Part->SubPartition_Of.c_str());
@@ -274,6 +270,8 @@ void TWPartitionManager::Output_Partition(TWPartition* Part) {
 		printf("   Alternate_Block_Device: %s\n", Part->Alternate_Block_Device.c_str());
 	if (!Part->Decrypted_Block_Device.empty())
 		printf("   Decrypted_Block_Device: %s\n", Part->Decrypted_Block_Device.c_str());
+	if (!Part->Crypto_Key_Location.empty() && Part->Crypto_Key_Location != "footer")
+		printf("   Crypto_Key_Location: %s\n", Part->Crypto_Key_Location.c_str());
 	if (Part->Length != 0)
 		printf("   Length: %i\n", Part->Length);
 	if (!Part->Display_Name.empty())
@@ -1352,61 +1350,32 @@ int TWPartitionManager::Decrypt_Device(string Password) {
 	int ret_val, password_len;
 	char crypto_blkdev[255], cPassword[255];
 	size_t result;
+	std::vector<TWPartition*>::iterator iter;
 
 	property_set("ro.crypto.state", "encrypted");
-#if defined(TW_INCLUDE_JB_CRYPTO) || defined(TW_INCLUDE_L_CRYPTO)
-	// No extra flags needed
-#else
-	property_set("ro.crypto.fs_type", CRYPTO_FS_TYPE);
-	property_set("ro.crypto.fs_real_blkdev", CRYPTO_REAL_BLKDEV);
-	property_set("ro.crypto.fs_mnt_point", CRYPTO_MNT_POINT);
-	property_set("ro.crypto.fs_options", CRYPTO_FS_OPTIONS);
-	property_set("ro.crypto.fs_flags", CRYPTO_FS_FLAGS);
-	property_set("ro.crypto.keyfile.userdata", CRYPTO_KEY_LOC);
-
-#ifdef CRYPTO_SD_FS_TYPE
-	property_set("ro.crypto.sd_fs_type", CRYPTO_SD_FS_TYPE);
-	property_set("ro.crypto.sd_fs_real_blkdev", CRYPTO_SD_REAL_BLKDEV);
-	property_set("ro.crypto.sd_fs_mnt_point", EXPAND(TW_INTERNAL_STORAGE_PATH));
-#endif
-
-	property_set("rw.km_fips_status", "ready");
-
-#endif
 
-	// some samsung devices store "footer" on efs partition
-	TWPartition *efs = Find_Partition_By_Path("/efs");
-	if(efs && !efs->Is_Mounted())
-		efs->Mount(false);
-	else
-		efs = 0;
-#ifdef TW_EXTERNAL_STORAGE_PATH
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-	TWPartition* sdcard = Find_Partition_By_Path(EXPAND(TW_EXTERNAL_STORAGE_PATH));
-	if (sdcard && sdcard->Mount(false)) {
-		property_set("ro.crypto.external_encrypted", "1");
-		property_set("ro.crypto.external_blkdev", sdcard->Actual_Block_Device.c_str());
-	} else {
-		property_set("ro.crypto.external_encrypted", "0");
+	// Mount any partitions that need to be mounted for decrypt
+	for (iter = Partitions.begin(); iter != Partitions.end(); iter++) {
+		if ((*iter)->Mount_To_Decrypt) {
+			(*iter)->Mount(true);
+		}
 	}
-#endif
-#endif
 
 	strcpy(cPassword, Password.c_str());
-#ifdef TW_INCLUDE_L_CRYPTO
-	Mount_By_Path("/vendor", false); // if exists, mount vendor partition as we may need some proprietary files
-	Mount_By_Path("/firmware", false); // if exists, mount firmware partition as we may need some proprietary files
-#endif
 	int pwret = cryptfs_check_passwd(cPassword);
 
+	// Unmount any partitions that were needed for decrypt
+	for (iter = Partitions.begin(); iter != Partitions.end(); iter++) {
+		if ((*iter)->Mount_To_Decrypt) {
+			(*iter)->UnMount(false);
+		}
+	}
+
 	if (pwret != 0) {
 		LOGERR("Failed to decrypt data.\n");
 		return -1;
 	}
 
-	if(efs)
-		efs->UnMount(false);
-
 	property_get("ro.crypto.fs_crypto_blkdev", crypto_blkdev, "error");
 	if (strcmp(crypto_blkdev, "error") == 0) {
 		LOGERR("Error retrieving decrypted data block device.\n");
@@ -1421,41 +1390,6 @@ int TWPartitionManager::Decrypt_Device(string Password) {
 			dat->Current_File_System = dat->Fstab_File_System; // Needed if we're ignoring blkid because encrypted devices start out as emmc
 			gui_print("Data successfully decrypted, new block device: '%s'\n", crypto_blkdev);
 
-#ifdef CRYPTO_SD_FS_TYPE
-			char crypto_blkdev_sd[255];
-			property_get("ro.crypto.sd_fs_crypto_blkdev", crypto_blkdev_sd, "error");
-			if (strcmp(crypto_blkdev_sd, "error") == 0) {
-				LOGERR("Error retrieving decrypted data block device.\n");
-			} else if(TWPartition* emmc = Find_Partition_By_Path(EXPAND(TW_INTERNAL_STORAGE_PATH))){
-				emmc->Is_Decrypted = true;
-				emmc->Decrypted_Block_Device = crypto_blkdev_sd;
-				emmc->Setup_File_System(false);
-				gui_print("Internal SD successfully decrypted, new block device: '%s'\n", crypto_blkdev_sd);
-			}
-#endif //ifdef CRYPTO_SD_FS_TYPE
-#ifdef TW_EXTERNAL_STORAGE_PATH
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-			char is_external_decrypted[255];
-			property_get("ro.crypto.external_use_ecryptfs", is_external_decrypted, "0");
-			if (strcmp(is_external_decrypted, "1") == 0) {
-				sdcard->Is_Decrypted = true;
-				sdcard->EcryptFS_Password = Password;
-				sdcard->Decrypted_Block_Device = sdcard->Actual_Block_Device;
-				string MetaEcfsFile = EXPAND(TW_EXTERNAL_STORAGE_PATH);
-				MetaEcfsFile += "/.MetaEcfsFile";
-				if (!TWFunc::Path_Exists(MetaEcfsFile)) {
-					// External storage isn't actually encrypted so unmount and remount without ecryptfs
-					sdcard->UnMount(false);
-					sdcard->Mount(false);
-				}
-			} else {
-				LOGINFO("External storage '%s' is not encrypted.\n", sdcard->Mount_Point.c_str());
-				sdcard->Is_Decrypted = false;
-				sdcard->Decrypted_Block_Device = "";
-			}
-#endif
-#endif //ifdef TW_EXTERNAL_STORAGE_PATH
-
 			// Sleep for a bit so that the device will be ready
 			sleep(1);
 			if (dat->Has_Data_Media && dat->Mount(false) && TWFunc::Path_Exists("/data/media/0")) {
diff --git a/partitions.hpp b/partitions.hpp
index 3f5aadda7..48c339dae 100644
--- a/partitions.hpp
+++ b/partitions.hpp
@@ -73,6 +73,7 @@ public:
 	string Actual_Block_Device;                                               // Actual block device (one of primary, alternate, or decrypted)
 	string MTD_Name;                                                          // Name of the partition for MTD devices
 	bool Is_Present;                                                          // Indicates if the partition is currently present as a block device
+	string Crypto_Key_Location;                                               // Location of the crypto key used for decrypting encrypted data partitions
 
 protected:
 	bool Has_Data_Media;                                                      // Indicates presence of /data/media, may affect wiping and backup methods
@@ -141,6 +142,7 @@ private:
 	bool Can_Be_Encrypted;                                                    // This partition might be encrypted, affects error handling, can only be true if crypto support is compiled in
 	bool Is_Encrypted;                                                        // This partition is thought to be encrypted -- it wouldn't mount for some reason, only avialble with crypto support
 	bool Is_Decrypted;                                                        // This partition has successfully been decrypted
+	bool Mount_To_Decrypt;                                                    // Mount this partition during decrypt (/vendor, /firmware, etc in case we need proprietary libs or firmware files)
 	string Display_Name;                                                      // Display name for the GUI
 	string Backup_Name;                                                       // Backup name -- used for backup filenames
 	string Backup_Display_Name;                                               // Name displayed in the partition list for backup selection
@@ -159,9 +161,6 @@ private:
 	int Format_Block_Size;                                                    // Block size for formatting
 	bool Ignore_Blkid;                                                        // Ignore blkid results due to superblocks lying to us on certain devices / partitions
 	bool Retain_Layout_Version;                                               // Retains the .layout_version file during a wipe (needed on devices like Sony Xperia T where /data and /data/media are separate partitions)
-#ifdef TW_INCLUDE_CRYPTO_SAMSUNG
-	string EcryptFS_Password;                                                 // Have to store the encryption password to remount
-#endif
 
 friend class TWPartitionManager;
 friend class DataManager;
diff --git a/prebuilt/Android.mk b/prebuilt/Android.mk
index ae66ef04f..58f3d4c51 100644
--- a/prebuilt/Android.mk
+++ b/prebuilt/Android.mk
@@ -112,27 +112,12 @@ ifeq ($(TW_INCLUDE_DUMLOCK), true)
     RELINK_SOURCE_FILES += $(TARGET_RECOVERY_ROOT_OUT)/sbin/htcdumlock
 endif
 ifeq ($(TW_INCLUDE_CRYPTO), true)
-    RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libcryptfsics.so
-    RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libcrypto.so
-endif
-ifeq ($(TW_INCLUDE_JB_CRYPTO), true)
-    RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libcryptfsjb.so
-    RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libcrypto.so
-endif
-ifeq ($(TW_INCLUDE_L_CRYPTO), true)
     RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libcryptfslollipop.so
     RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libcrypto.so
     RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libbinder.so
-    RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libdiskconfig.so
-    RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libf2fs_sparseblock.so
     RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libhardware.so
-    RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libhardware_legacy.so
-    RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libnetutils.so
-    RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libwpa_client.so
-    RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/liblogwrap.so
     RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libsoftkeymaster.so
     RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libkeystore_binder.so
-    RELINK_SOURCE_FILES += $(TARGET_OUT_SHARED_LIBRARIES)/libsysutils.so
 endif
 ifeq ($(TARGET_USERIMAGES_USE_EXT4), true)
     RELINK_SOURCE_FILES += $(TARGET_OUT_EXECUTABLES)/make_ext4fs