1 files changed, 0 insertions, 185 deletions

diff --git a/libjpegtwrp/jutils.c b/libjpegtwrp/jutils.c
deleted file mode 100644
index 616ad0511..000000000
--- a/libjpegtwrp/jutils.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * jutils.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains tables and miscellaneous utility routines needed
- * for both compression and decompression.
- * Note we prefix all global names with "j" to minimize conflicts with
- * a surrounding application.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * jpeg_zigzag_order[i] is the zigzag-order position of the i'th element
- * of a DCT block read in natural order (left to right, top to bottom).
- */
-
-#if 0				/* This table is not actually needed in v6a */
-
-const int jpeg_zigzag_order[DCTSIZE2] = {
-   0,  1,  5,  6, 14, 15, 27, 28,
-   2,  4,  7, 13, 16, 26, 29, 42,
-   3,  8, 12, 17, 25, 30, 41, 43,
-   9, 11, 18, 24, 31, 40, 44, 53,
-  10, 19, 23, 32, 39, 45, 52, 54,
-  20, 22, 33, 38, 46, 51, 55, 60,
-  21, 34, 37, 47, 50, 56, 59, 61,
-  35, 36, 48, 49, 57, 58, 62, 63
-};
-
-#endif
-
-/*
- * jpeg_natural_order[i] is the natural-order position of the i'th element
- * of zigzag order.
- *
- * When reading corrupted data, the Huffman decoders could attempt
- * to reference an entry beyond the end of this array (if the decoded
- * zero run length reaches past the end of the block).  To prevent
- * wild stores without adding an inner-loop test, we put some extra
- * "63"s after the real entries.  This will cause the extra coefficient
- * to be stored in location 63 of the block, not somewhere random.
- * The worst case would be a run-length of 15, which means we need 16
- * fake entries.
- */
-
-const int jpeg_natural_order[DCTSIZE2+16] = {
-  0,  1,  8, 16,  9,  2,  3, 10,
- 17, 24, 32, 25, 18, 11,  4,  5,
- 12, 19, 26, 33, 40, 48, 41, 34,
- 27, 20, 13,  6,  7, 14, 21, 28,
- 35, 42, 49, 56, 57, 50, 43, 36,
- 29, 22, 15, 23, 30, 37, 44, 51,
- 58, 59, 52, 45, 38, 31, 39, 46,
- 53, 60, 61, 54, 47, 55, 62, 63,
- 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */
- 63, 63, 63, 63, 63, 63, 63, 63
-};
-
-
-/*
- * Arithmetic utilities
- */
-
-GLOBAL(long)
-jdiv_round_up (long a, long b)
-/* Compute a/b rounded up to next integer, ie, ceil(a/b) */
-/* Assumes a >= 0, b > 0 */
-{
-  return (a + b - 1L) / b;
-}
-
-
-GLOBAL(long)
-jround_up (long a, long b)
-/* Compute a rounded up to next multiple of b, ie, ceil(a/b)*b */
-/* Assumes a >= 0, b > 0 */
-{
-  a += b - 1L;
-  return a - (a % b);
-}
-
-GLOBAL(long)
-jmin (long a, long b)
-{
-  return a < b ? a : b;
-}
-
-
-/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays
- * and coefficient-block arrays.  This won't work on 80x86 because the arrays
- * are FAR and we're assuming a small-pointer memory model.  However, some
- * DOS compilers provide far-pointer versions of memcpy() and memset() even
- * in the small-model libraries.  These will be used if USE_FMEM is defined.
- * Otherwise, the routines below do it the hard way.  (The performance cost
- * is not all that great, because these routines aren't very heavily used.)
- */
-
-#ifndef NEED_FAR_POINTERS	/* normal case, same as regular macros */
-#define FMEMCOPY(dest,src,size)	MEMCOPY(dest,src,size)
-#define FMEMZERO(target,size)	MEMZERO(target,size)
-#else				/* 80x86 case, define if we can */
-#ifdef USE_FMEM
-#define FMEMCOPY(dest,src,size)	_fmemcpy((void FAR *)(dest), (const void FAR *)(src), (size_t)(size))
-#define FMEMZERO(target,size)	_fmemset((void FAR *)(target), 0, (size_t)(size))
-#endif
-#endif
-
-
-GLOBAL(void)
-jcopy_sample_rows (JSAMPARRAY input_array, int source_row,
-		   JSAMPARRAY output_array, int dest_row,
-		   int num_rows, JDIMENSION num_cols)
-/* Copy some rows of samples from one place to another.
- * num_rows rows are copied from input_array[source_row++]
- * to output_array[dest_row++]; these areas may overlap for duplication.
- * The source and destination arrays must be at least as wide as num_cols.
- */
-{
-  register JSAMPROW inptr, outptr;
-#ifdef FMEMCOPY
-  register size_t count = (size_t) (num_cols * SIZEOF(JSAMPLE));
-#else
-  register JDIMENSION count;
-#endif
-  register int row;
-
-  input_array += source_row;
-  output_array += dest_row;
-
-  for (row = num_rows; row > 0; row--) {
-    inptr = *input_array++;
-    outptr = *output_array++;
-#ifdef FMEMCOPY
-    FMEMCOPY(outptr, inptr, count);
-#else
-    for (count = num_cols; count > 0; count--)
-      *outptr++ = *inptr++;	/* needn't bother with GETJSAMPLE() here */
-#endif
-  }
-}
-
-
-GLOBAL(void)
-jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row,
-		 JDIMENSION num_blocks)
-/* Copy a row of coefficient blocks from one place to another. */
-{
-#ifdef FMEMCOPY
-  FMEMCOPY(output_row, input_row, num_blocks * (DCTSIZE2 * SIZEOF(JCOEF)));
-#else
-  register JCOEFPTR inptr, outptr;
-  register long count;
-
-  inptr = (JCOEFPTR) input_row;
-  outptr = (JCOEFPTR) output_row;
-  for (count = (long) num_blocks * DCTSIZE2; count > 0; count--) {
-    *outptr++ = *inptr++;
-  }
-#endif
-}
-
-
-GLOBAL(void)
-jzero_far (void FAR * target, size_t bytestozero)
-/* Zero out a chunk of FAR memory. */
-/* This might be sample-array data, block-array data, or alloc_large data. */
-{
-#ifdef FMEMZERO
-  FMEMZERO(target, bytestozero);
-#else
-  register char FAR * ptr = (char FAR *) target;
-  register size_t count;
-
-  for (count = bytestozero; count > 0; count--) {
-    *ptr++ = 0;
-  }
-#endif
-}