summaryrefslogtreecommitdiffstats
path: root/libjpegtwrp/structure.doc
diff options
context:
space:
mode:
authorDees_Troy <dees_troy@teamw.in>2013-08-11 15:32:44 +0200
committerGerrit Code Review <gerrit@198.50.184.117>2013-08-11 15:32:44 +0200
commitbdafe306fa80312e25491f092000a5bb79dc1617 (patch)
treea5fc3523fa892adba7db8432524278da6dc349a2 /libjpegtwrp/structure.doc
parentMerge "Rename libfuse to prevent conflicts with newer CM trees" into twrp2.5 (diff)
parentRemove libjpegtwrp and use CM provided libjpeg (diff)
downloadandroid_bootable_recovery-bdafe306fa80312e25491f092000a5bb79dc1617.tar
android_bootable_recovery-bdafe306fa80312e25491f092000a5bb79dc1617.tar.gz
android_bootable_recovery-bdafe306fa80312e25491f092000a5bb79dc1617.tar.bz2
android_bootable_recovery-bdafe306fa80312e25491f092000a5bb79dc1617.tar.lz
android_bootable_recovery-bdafe306fa80312e25491f092000a5bb79dc1617.tar.xz
android_bootable_recovery-bdafe306fa80312e25491f092000a5bb79dc1617.tar.zst
android_bootable_recovery-bdafe306fa80312e25491f092000a5bb79dc1617.zip
Diffstat (limited to 'libjpegtwrp/structure.doc')
-rw-r--r--libjpegtwrp/structure.doc948
1 files changed, 0 insertions, 948 deletions
diff --git a/libjpegtwrp/structure.doc b/libjpegtwrp/structure.doc
deleted file mode 100644
index 51c9def7e..000000000
--- a/libjpegtwrp/structure.doc
+++ /dev/null
@@ -1,948 +0,0 @@
-IJG JPEG LIBRARY: SYSTEM ARCHITECTURE
-
-Copyright (C) 1991-1995, Thomas G. Lane.
-This file is part of the Independent JPEG Group's software.
-For conditions of distribution and use, see the accompanying README file.
-
-
-This file provides an overview of the architecture of the IJG JPEG software;
-that is, the functions of the various modules in the system and the interfaces
-between modules. For more precise details about any data structure or calling
-convention, see the include files and comments in the source code.
-
-We assume that the reader is already somewhat familiar with the JPEG standard.
-The README file includes references for learning about JPEG. The file
-libjpeg.doc describes the library from the viewpoint of an application
-programmer using the library; it's best to read that file before this one.
-Also, the file coderules.doc describes the coding style conventions we use.
-
-In this document, JPEG-specific terminology follows the JPEG standard:
- A "component" means a color channel, e.g., Red or Luminance.
- A "sample" is a single component value (i.e., one number in the image data).
- A "coefficient" is a frequency coefficient (a DCT transform output number).
- A "block" is an 8x8 group of samples or coefficients.
- An "MCU" (minimum coded unit) is an interleaved set of blocks of size
- determined by the sampling factors, or a single block in a
- noninterleaved scan.
-We do not use the terms "pixel" and "sample" interchangeably. When we say
-pixel, we mean an element of the full-size image, while a sample is an element
-of the downsampled image. Thus the number of samples may vary across
-components while the number of pixels does not. (This terminology is not used
-rigorously throughout the code, but it is used in places where confusion would
-otherwise result.)
-
-
-*** System features ***
-
-The IJG distribution contains two parts:
- * A subroutine library for JPEG compression and decompression.
- * cjpeg/djpeg, two sample applications that use the library to transform
- JFIF JPEG files to and from several other image formats.
-cjpeg/djpeg are of no great intellectual complexity: they merely add a simple
-command-line user interface and I/O routines for several uncompressed image
-formats. This document concentrates on the library itself.
-
-We desire the library to be capable of supporting all JPEG baseline, extended
-sequential, and progressive DCT processes. Hierarchical processes are not
-supported.
-
-The library does not support the lossless (spatial) JPEG process. Lossless
-JPEG shares little or no code with lossy JPEG, and would normally be used
-without the extensive pre- and post-processing provided by this library.
-We feel that lossless JPEG is better handled by a separate library.
-
-Within these limits, any set of compression parameters allowed by the JPEG
-spec should be readable for decompression. (We can be more restrictive about
-what formats we can generate.) Although the system design allows for all
-parameter values, some uncommon settings are not yet implemented and may
-never be; nonintegral sampling ratios are the prime example. Furthermore,
-we treat 8-bit vs. 12-bit data precision as a compile-time switch, not a
-run-time option, because most machines can store 8-bit pixels much more
-compactly than 12-bit.
-
-For legal reasons, JPEG arithmetic coding is not currently supported, but
-extending the library to include it would be straightforward.
-
-By itself, the library handles only interchange JPEG datastreams --- in
-particular the widely used JFIF file format. The library can be used by
-surrounding code to process interchange or abbreviated JPEG datastreams that
-are embedded in more complex file formats. (For example, libtiff uses this
-library to implement JPEG compression within the TIFF file format.)
-
-The library includes a substantial amount of code that is not covered by the
-JPEG standard but is necessary for typical applications of JPEG. These
-functions preprocess the image before JPEG compression or postprocess it after
-decompression. They include colorspace conversion, downsampling/upsampling,
-and color quantization. This code can be omitted if not needed.
-
-A wide range of quality vs. speed tradeoffs are possible in JPEG processing,
-and even more so in decompression postprocessing. The decompression library
-provides multiple implementations that cover most of the useful tradeoffs,
-ranging from very-high-quality down to fast-preview operation. On the
-compression side we have generally not provided low-quality choices, since
-compression is normally less time-critical. It should be understood that the
-low-quality modes may not meet the JPEG standard's accuracy requirements;
-nonetheless, they are useful for viewers.
-
-
-*** Portability issues ***
-
-Portability is an essential requirement for the library. The key portability
-issues that show up at the level of system architecture are:
-
-1. Memory usage. We want the code to be able to run on PC-class machines
-with limited memory. Images should therefore be processed sequentially (in
-strips), to avoid holding the whole image in memory at once. Where a
-full-image buffer is necessary, we should be able to use either virtual memory
-or temporary files.
-
-2. Near/far pointer distinction. To run efficiently on 80x86 machines, the
-code should distinguish "small" objects (kept in near data space) from
-"large" ones (kept in far data space). This is an annoying restriction, but
-fortunately it does not impact code quality for less brain-damaged machines,
-and the source code clutter turns out to be minimal with sufficient use of
-pointer typedefs.
-
-3. Data precision. We assume that "char" is at least 8 bits, "short" and
-"int" at least 16, "long" at least 32. The code will work fine with larger
-data sizes, although memory may be used inefficiently in some cases. However,
-the JPEG compressed datastream must ultimately appear on external storage as a
-sequence of 8-bit bytes if it is to conform to the standard. This may pose a
-problem on machines where char is wider than 8 bits. The library represents
-compressed data as an array of values of typedef JOCTET. If no data type
-exactly 8 bits wide is available, custom data source and data destination
-modules must be written to unpack and pack the chosen JOCTET datatype into
-8-bit external representation.
-
-
-*** System overview ***
-
-The compressor and decompressor are each divided into two main sections:
-the JPEG compressor or decompressor proper, and the preprocessing or
-postprocessing functions. The interface between these two sections is the
-image data that the official JPEG spec regards as its input or output: this
-data is in the colorspace to be used for compression, and it is downsampled
-to the sampling factors to be used. The preprocessing and postprocessing
-steps are responsible for converting a normal image representation to or from
-this form. (Those few applications that want to deal with YCbCr downsampled
-data can skip the preprocessing or postprocessing step.)
-
-Looking more closely, the compressor library contains the following main
-elements:
-
- Preprocessing:
- * Color space conversion (e.g., RGB to YCbCr).
- * Edge expansion and downsampling. Optionally, this step can do simple
- smoothing --- this is often helpful for low-quality source data.
- JPEG proper:
- * MCU assembly, DCT, quantization.
- * Entropy coding (sequential or progressive, Huffman or arithmetic).
-
-In addition to these modules we need overall control, marker generation,
-and support code (memory management & error handling). There is also a
-module responsible for physically writing the output data --- typically
-this is just an interface to fwrite(), but some applications may need to
-do something else with the data.
-
-The decompressor library contains the following main elements:
-
- JPEG proper:
- * Entropy decoding (sequential or progressive, Huffman or arithmetic).
- * Dequantization, inverse DCT, MCU disassembly.
- Postprocessing:
- * Upsampling. Optionally, this step may be able to do more general
- rescaling of the image.
- * Color space conversion (e.g., YCbCr to RGB). This step may also
- provide gamma adjustment [ currently it does not ].
- * Optional color quantization (e.g., reduction to 256 colors).
- * Optional color precision reduction (e.g., 24-bit to 15-bit color).
- [This feature is not currently implemented.]
-
-We also need overall control, marker parsing, and a data source module.
-The support code (memory management & error handling) can be shared with
-the compression half of the library.
-
-There may be several implementations of each of these elements, particularly
-in the decompressor, where a wide range of speed/quality tradeoffs is very
-useful. It must be understood that some of the best speedups involve
-merging adjacent steps in the pipeline. For example, upsampling, color space
-conversion, and color quantization might all be done at once when using a
-low-quality ordered-dither technique. The system architecture is designed to
-allow such merging where appropriate.
-
-
-Note: it is convenient to regard edge expansion (padding to block boundaries)
-as a preprocessing/postprocessing function, even though the JPEG spec includes
-it in compression/decompression. We do this because downsampling/upsampling
-can be simplified a little if they work on padded data: it's not necessary to
-have special cases at the right and bottom edges. Therefore the interface
-buffer is always an integral number of blocks wide and high, and we expect
-compression preprocessing to pad the source data properly. Padding will occur
-only to the next block (8-sample) boundary. In an interleaved-scan situation,
-additional dummy blocks may be used to fill out MCUs, but the MCU assembly and
-disassembly logic will create or discard these blocks internally. (This is
-advantageous for speed reasons, since we avoid DCTing the dummy blocks.
-It also permits a small reduction in file size, because the compressor can
-choose dummy block contents so as to minimize their size in compressed form.
-Finally, it makes the interface buffer specification independent of whether
-the file is actually interleaved or not.) Applications that wish to deal
-directly with the downsampled data must provide similar buffering and padding
-for odd-sized images.
-
-
-*** Poor man's object-oriented programming ***
-
-It should be clear by now that we have a lot of quasi-independent processing
-steps, many of which have several possible behaviors. To avoid cluttering the
-code with lots of switch statements, we use a simple form of object-style
-programming to separate out the different possibilities.
-
-For example, two different color quantization algorithms could be implemented
-as two separate modules that present the same external interface; at runtime,
-the calling code will access the proper module indirectly through an "object".
-
-We can get the limited features we need while staying within portable C.
-The basic tool is a function pointer. An "object" is just a struct
-containing one or more function pointer fields, each of which corresponds to
-a method name in real object-oriented languages. During initialization we
-fill in the function pointers with references to whichever module we have
-determined we need to use in this run. Then invocation of the module is done
-by indirecting through a function pointer; on most machines this is no more
-expensive than a switch statement, which would be the only other way of
-making the required run-time choice. The really significant benefit, of
-course, is keeping the source code clean and well structured.
-
-We can also arrange to have private storage that varies between different
-implementations of the same kind of object. We do this by making all the
-module-specific object structs be separately allocated entities, which will
-be accessed via pointers in the master compression or decompression struct.
-The "public" fields or methods for a given kind of object are specified by
-a commonly known struct. But a module's initialization code can allocate
-a larger struct that contains the common struct as its first member, plus
-additional private fields. With appropriate pointer casting, the module's
-internal functions can access these private fields. (For a simple example,
-see jdatadst.c, which implements the external interface specified by struct
-jpeg_destination_mgr, but adds extra fields.)
-
-(Of course this would all be a lot easier if we were using C++, but we are
-not yet prepared to assume that everyone has a C++ compiler.)
-
-An important benefit of this scheme is that it is easy to provide multiple
-versions of any method, each tuned to a particular case. While a lot of
-precalculation might be done to select an optimal implementation of a method,
-the cost per invocation is constant. For example, the upsampling step might
-have a "generic" method, plus one or more "hardwired" methods for the most
-popular sampling factors; the hardwired methods would be faster because they'd
-use straight-line code instead of for-loops. The cost to determine which
-method to use is paid only once, at startup, and the selection criteria are
-hidden from the callers of the method.
-
-This plan differs a little bit from usual object-oriented structures, in that
-only one instance of each object class will exist during execution. The
-reason for having the class structure is that on different runs we may create
-different instances (choose to execute different modules). You can think of
-the term "method" as denoting the common interface presented by a particular
-set of interchangeable functions, and "object" as denoting a group of related
-methods, or the total shared interface behavior of a group of modules.
-
-
-*** Overall control structure ***
-
-We previously mentioned the need for overall control logic in the compression
-and decompression libraries. In IJG implementations prior to v5, overall
-control was mostly provided by "pipeline control" modules, which proved to be
-large, unwieldy, and hard to understand. To improve the situation, the
-control logic has been subdivided into multiple modules. The control modules
-consist of:
-
-1. Master control for module selection and initialization. This has two
-responsibilities:
-
- 1A. Startup initialization at the beginning of image processing.
- The individual processing modules to be used in this run are selected
- and given initialization calls.
-
- 1B. Per-pass control. This determines how many passes will be performed
- and calls each active processing module to configure itself
- appropriately at the beginning of each pass. End-of-pass processing,
- where necessary, is also invoked from the master control module.
-
- Method selection is partially distributed, in that a particular processing
- module may contain several possible implementations of a particular method,
- which it will select among when given its initialization call. The master
- control code need only be concerned with decisions that affect more than
- one module.
-
-2. Data buffering control. A separate control module exists for each
- inter-processing-step data buffer. This module is responsible for
- invoking the processing steps that write or read that data buffer.
-
-Each buffer controller sees the world as follows:
-
-input data => processing step A => buffer => processing step B => output data
- | | |
- ------------------ controller ------------------
-
-The controller knows the dataflow requirements of steps A and B: how much data
-they want to accept in one chunk and how much they output in one chunk. Its
-function is to manage its buffer and call A and B at the proper times.
-
-A data buffer control module may itself be viewed as a processing step by a
-higher-level control module; thus the control modules form a binary tree with
-elementary processing steps at the leaves of the tree.
-
-The control modules are objects. A considerable amount of flexibility can
-be had by replacing implementations of a control module. For example:
-* Merging of adjacent steps in the pipeline is done by replacing a control
- module and its pair of processing-step modules with a single processing-
- step module. (Hence the possible merges are determined by the tree of
- control modules.)
-* In some processing modes, a given interstep buffer need only be a "strip"
- buffer large enough to accommodate the desired data chunk sizes. In other
- modes, a full-image buffer is needed and several passes are required.
- The control module determines which kind of buffer is used and manipulates
- virtual array buffers as needed. One or both processing steps may be
- unaware of the multi-pass behavior.
-
-In theory, we might be able to make all of the data buffer controllers
-interchangeable and provide just one set of implementations for all. In
-practice, each one contains considerable special-case processing for its
-particular job. The buffer controller concept should be regarded as an
-overall system structuring principle, not as a complete description of the
-task performed by any one controller.
-
-
-*** Compression object structure ***
-
-Here is a sketch of the logical structure of the JPEG compression library:
-
- |-- Colorspace conversion
- |-- Preprocessing controller --|
- | |-- Downsampling
-Main controller --|
- | |-- Forward DCT, quantize
- |-- Coefficient controller --|
- |-- Entropy encoding
-
-This sketch also describes the flow of control (subroutine calls) during
-typical image data processing. Each of the components shown in the diagram is
-an "object" which may have several different implementations available. One
-or more source code files contain the actual implementation(s) of each object.
-
-The objects shown above are:
-
-* Main controller: buffer controller for the subsampled-data buffer, which
- holds the preprocessed input data. This controller invokes preprocessing to
- fill the subsampled-data buffer, and JPEG compression to empty it. There is
- usually no need for a full-image buffer here; a strip buffer is adequate.
-
-* Preprocessing controller: buffer controller for the downsampling input data
- buffer, which lies between colorspace conversion and downsampling. Note
- that a unified conversion/downsampling module would probably replace this
- controller entirely.
-
-* Colorspace conversion: converts application image data into the desired
- JPEG color space; also changes the data from pixel-interleaved layout to
- separate component planes. Processes one pixel row at a time.
-
-* Downsampling: performs reduction of chroma components as required.
- Optionally may perform pixel-level smoothing as well. Processes a "row
- group" at a time, where a row group is defined as Vmax pixel rows of each
- component before downsampling, and Vk sample rows afterwards (remember Vk
- differs across components). Some downsampling or smoothing algorithms may
- require context rows above and below the current row group; the
- preprocessing controller is responsible for supplying these rows via proper
- buffering. The downsampler is responsible for edge expansion at the right
- edge (i.e., extending each sample row to a multiple of 8 samples); but the
- preprocessing controller is responsible for vertical edge expansion (i.e.,
- duplicating the bottom sample row as needed to make a multiple of 8 rows).
-
-* Coefficient controller: buffer controller for the DCT-coefficient data.
- This controller handles MCU assembly, including insertion of dummy DCT
- blocks when needed at the right or bottom edge. When performing
- Huffman-code optimization or emitting a multiscan JPEG file, this
- controller is responsible for buffering the full image. The equivalent of
- one fully interleaved MCU row of subsampled data is processed per call,
- even when the JPEG file is noninterleaved.
-
-* Forward DCT and quantization: Perform DCT, quantize, and emit coefficients.
- Works on one or more DCT blocks at a time. (Note: the coefficients are now
- emitted in normal array order, which the entropy encoder is expected to
- convert to zigzag order as necessary. Prior versions of the IJG code did
- the conversion to zigzag order within the quantization step.)
-
-* Entropy encoding: Perform Huffman or arithmetic entropy coding and emit the
- coded data to the data destination module. Works on one MCU per call.
- For progressive JPEG, the same DCT blocks are fed to the entropy coder
- during each pass, and the coder must emit the appropriate subset of
- coefficients.
-
-In addition to the above objects, the compression library includes these
-objects:
-
-* Master control: determines the number of passes required, controls overall
- and per-pass initialization of the other modules.
-
-* Marker writing: generates JPEG markers (except for RSTn, which is emitted
- by the entropy encoder when needed).
-
-* Data destination manager: writes the output JPEG datastream to its final
- destination (e.g., a file). The destination manager supplied with the
- library knows how to write to a stdio stream; for other behaviors, the
- surrounding application may provide its own destination manager.
-
-* Memory manager: allocates and releases memory, controls virtual arrays
- (with backing store management, where required).
-
-* Error handler: performs formatting and output of error and trace messages;
- determines handling of nonfatal errors. The surrounding application may
- override some or all of this object's methods to change error handling.
-
-* Progress monitor: supports output of "percent-done" progress reports.
- This object represents an optional callback to the surrounding application:
- if wanted, it must be supplied by the application.
-
-The error handler, destination manager, and progress monitor objects are
-defined as separate objects in order to simplify application-specific
-customization of the JPEG library. A surrounding application may override
-individual methods or supply its own all-new implementation of one of these
-objects. The object interfaces for these objects are therefore treated as
-part of the application interface of the library, whereas the other objects
-are internal to the library.
-
-The error handler and memory manager are shared by JPEG compression and
-decompression; the progress monitor, if used, may be shared as well.
-
-
-*** Decompression object structure ***
-
-Here is a sketch of the logical structure of the JPEG decompression library:
-
- |-- Entropy decoding
- |-- Coefficient controller --|
- | |-- Dequantize, Inverse DCT
-Main controller --|
- | |-- Upsampling
- |-- Postprocessing controller --| |-- Colorspace conversion
- |-- Color quantization
- |-- Color precision reduction
-
-As before, this diagram also represents typical control flow. The objects
-shown are:
-
-* Main controller: buffer controller for the subsampled-data buffer, which
- holds the output of JPEG decompression proper. This controller's primary
- task is to feed the postprocessing procedure. Some upsampling algorithms
- may require context rows above and below the current row group; when this
- is true, the main controller is responsible for managing its buffer so as
- to make context rows available. In the current design, the main buffer is
- always a strip buffer; a full-image buffer is never required.
-
-* Coefficient controller: buffer controller for the DCT-coefficient data.
- This controller handles MCU disassembly, including deletion of any dummy
- DCT blocks at the right or bottom edge. When reading a multiscan JPEG
- file, this controller is responsible for buffering the full image.
- (Buffering DCT coefficients, rather than samples, is necessary to support
- progressive JPEG.) The equivalent of one fully interleaved MCU row of
- subsampled data is processed per call, even when the source JPEG file is
- noninterleaved.
-
-* Entropy decoding: Read coded data from the data source module and perform
- Huffman or arithmetic entropy decoding. Works on one MCU per call.
- For progressive JPEG decoding, the coefficient controller supplies the prior
- coefficients of each MCU (initially all zeroes), which the entropy decoder
- modifies in each scan.
-
-* Dequantization and inverse DCT: like it says. Note that the coefficients
- buffered by the coefficient controller have NOT been dequantized; we
- merge dequantization and inverse DCT into a single step for speed reasons.
- When scaled-down output is asked for, simplified DCT algorithms may be used
- that emit only 1x1, 2x2, or 4x4 samples per DCT block, not the full 8x8.
- Works on one DCT block at a time.
-
-* Postprocessing controller: buffer controller for the color quantization
- input buffer, when quantization is in use. (Without quantization, this
- controller just calls the upsampler.) For two-pass quantization, this
- controller is responsible for buffering the full-image data.
-
-* Upsampling: restores chroma components to full size. (May support more
- general output rescaling, too. Note that if undersized DCT outputs have
- been emitted by the DCT module, this module must adjust so that properly
- sized outputs are created.) Works on one row group at a time. This module
- also calls the color conversion module, so its top level is effectively a
- buffer controller for the upsampling->color conversion buffer. However, in
- all but the highest-quality operating modes, upsampling and color
- conversion are likely to be merged into a single step.
-
-* Colorspace conversion: convert from JPEG color space to output color space,
- and change data layout from separate component planes to pixel-interleaved.
- Works on one pixel row at a time.
-
-* Color quantization: reduce the data to colormapped form, using either an
- externally specified colormap or an internally generated one. This module
- is not used for full-color output. Works on one pixel row at a time; may
- require two passes to generate a color map. Note that the output will
- always be a single component representing colormap indexes. In the current
- design, the output values are JSAMPLEs, so an 8-bit compilation cannot
- quantize to more than 256 colors. This is unlikely to be a problem in
- practice.
-
-* Color reduction: this module handles color precision reduction, e.g.,
- generating 15-bit color (5 bits/primary) from JPEG's 24-bit output.
- Not quite clear yet how this should be handled... should we merge it with
- colorspace conversion???
-
-Note that some high-speed operating modes might condense the entire
-postprocessing sequence to a single module (upsample, color convert, and
-quantize in one step).
-
-In addition to the above objects, the decompression library includes these
-objects:
-
-* Master control: determines the number of passes required, controls overall
- and per-pass initialization of the other modules. This is subdivided into
- input and output control: jdinput.c controls only input-side processing,
- while jdmaster.c handles overall initialization and output-side control.
-
-* Marker reading: decodes JPEG markers (except for RSTn).
-
-* Data source manager: supplies the input JPEG datastream. The source
- manager supplied with the library knows how to read from a stdio stream;
- for other behaviors, the surrounding application may provide its own source
- manager.
-
-* Memory manager: same as for compression library.
-
-* Error handler: same as for compression library.
-
-* Progress monitor: same as for compression library.
-
-As with compression, the data source manager, error handler, and progress
-monitor are candidates for replacement by a surrounding application.
-
-
-*** Decompression input and output separation ***
-
-To support efficient incremental display of progressive JPEG files, the
-decompressor is divided into two sections that can run independently:
-
-1. Data input includes marker parsing, entropy decoding, and input into the
- coefficient controller's DCT coefficient buffer. Note that this
- processing is relatively cheap and fast.
-
-2. Data output reads from the DCT coefficient buffer and performs the IDCT
- and all postprocessing steps.
-
-For a progressive JPEG file, the data input processing is allowed to get
-arbitrarily far ahead of the data output processing. (This occurs only
-if the application calls jpeg_consume_input(); otherwise input and output
-run in lockstep, since the input section is called only when the output
-section needs more data.) In this way the application can avoid making
-extra display passes when data is arriving faster than the display pass
-can run. Furthermore, it is possible to abort an output pass without
-losing anything, since the coefficient buffer is read-only as far as the
-output section is concerned. See libjpeg.doc for more detail.
-
-A full-image coefficient array is only created if the JPEG file has multiple
-scans (or if the application specifies buffered-image mode anyway). When
-reading a single-scan file, the coefficient controller normally creates only
-a one-MCU buffer, so input and output processing must run in lockstep in this
-case. jpeg_consume_input() is effectively a no-op in this situation.
-
-The main impact of dividing the decompressor in this fashion is that we must
-be very careful with shared variables in the cinfo data structure. Each
-variable that can change during the course of decompression must be
-classified as belonging to data input or data output, and each section must
-look only at its own variables. For example, the data output section may not
-depend on any of the variables that describe the current scan in the JPEG
-file, because these may change as the data input section advances into a new
-scan.
-
-The progress monitor is (somewhat arbitrarily) defined to treat input of the
-file as one pass when buffered-image mode is not used, and to ignore data
-input work completely when buffered-image mode is used. Note that the
-library has no reliable way to predict the number of passes when dealing
-with a progressive JPEG file, nor can it predict the number of output passes
-in buffered-image mode. So the work estimate is inherently bogus anyway.
-
-No comparable division is currently made in the compression library, because
-there isn't any real need for it.
-
-
-*** Data formats ***
-
-Arrays of pixel sample values use the following data structure:
-
- typedef something JSAMPLE; a pixel component value, 0..MAXJSAMPLE
- typedef JSAMPLE *JSAMPROW; ptr to a row of samples
- typedef JSAMPROW *JSAMPARRAY; ptr to a list of rows
- typedef JSAMPARRAY *JSAMPIMAGE; ptr to a list of color-component arrays
-
-The basic element type JSAMPLE will typically be one of unsigned char,
-(signed) char, or short. Short will be used if samples wider than 8 bits are
-to be supported (this is a compile-time option). Otherwise, unsigned char is
-used if possible. If the compiler only supports signed chars, then it is
-necessary to mask off the value when reading. Thus, all reads of JSAMPLE
-values must be coded as "GETJSAMPLE(value)", where the macro will be defined
-as "((value) & 0xFF)" on signed-char machines and "((int) (value))" elsewhere.
-
-With these conventions, JSAMPLE values can be assumed to be >= 0. This helps
-simplify correct rounding during downsampling, etc. The JPEG standard's
-specification that sample values run from -128..127 is accommodated by
-subtracting 128 just as the sample value is copied into the source array for
-the DCT step (this will be an array of signed ints). Similarly, during
-decompression the output of the IDCT step will be immediately shifted back to
-0..255. (NB: different values are required when 12-bit samples are in use.
-The code is written in terms of MAXJSAMPLE and CENTERJSAMPLE, which will be
-defined as 255 and 128 respectively in an 8-bit implementation, and as 4095
-and 2048 in a 12-bit implementation.)
-
-We use a pointer per row, rather than a two-dimensional JSAMPLE array. This
-choice costs only a small amount of memory and has several benefits:
-* Code using the data structure doesn't need to know the allocated width of
- the rows. This simplifies edge expansion/compression, since we can work
- in an array that's wider than the logical picture width.
-* Indexing doesn't require multiplication; this is a performance win on many
- machines.
-* Arrays with more than 64K total elements can be supported even on machines
- where malloc() cannot allocate chunks larger than 64K.
-* The rows forming a component array may be allocated at different times
- without extra copying. This trick allows some speedups in smoothing steps
- that need access to the previous and next rows.
-
-Note that each color component is stored in a separate array; we don't use the
-traditional layout in which the components of a pixel are stored together.
-This simplifies coding of modules that work on each component independently,
-because they don't need to know how many components there are. Furthermore,
-we can read or write each component to a temporary file independently, which
-is helpful when dealing with noninterleaved JPEG files.
-
-In general, a specific sample value is accessed by code such as
- GETJSAMPLE(image[colorcomponent][row][col])
-where col is measured from the image left edge, but row is measured from the
-first sample row currently in memory. Either of the first two indexings can
-be precomputed by copying the relevant pointer.
-
-
-Since most image-processing applications prefer to work on images in which
-the components of a pixel are stored together, the data passed to or from the
-surrounding application uses the traditional convention: a single pixel is
-represented by N consecutive JSAMPLE values, and an image row is an array of
-(# of color components)*(image width) JSAMPLEs. One or more rows of data can
-be represented by a pointer of type JSAMPARRAY in this scheme. This scheme is
-converted to component-wise storage inside the JPEG library. (Applications
-that want to skip JPEG preprocessing or postprocessing will have to contend
-with component-wise storage.)
-
-
-Arrays of DCT-coefficient values use the following data structure:
-
- typedef short JCOEF; a 16-bit signed integer
- typedef JCOEF JBLOCK[DCTSIZE2]; an 8x8 block of coefficients
- typedef JBLOCK *JBLOCKROW; ptr to one horizontal row of 8x8 blocks
- typedef JBLOCKROW *JBLOCKARRAY; ptr to a list of such rows
- typedef JBLOCKARRAY *JBLOCKIMAGE; ptr to a list of color component arrays
-
-The underlying type is at least a 16-bit signed integer; while "short" is big
-enough on all machines of interest, on some machines it is preferable to use
-"int" for speed reasons, despite the storage cost. Coefficients are grouped
-into 8x8 blocks (but we always use #defines DCTSIZE and DCTSIZE2 rather than
-"8" and "64").
-
-The contents of a coefficient block may be in either "natural" or zigzagged
-order, and may be true values or divided by the quantization coefficients,
-depending on where the block is in the processing pipeline. In the current
-library, coefficient blocks are kept in natural order everywhere; the entropy
-codecs zigzag or dezigzag the data as it is written or read. The blocks
-contain quantized coefficients everywhere outside the DCT/IDCT subsystems.
-(This latter decision may need to be revisited to support variable
-quantization a la JPEG Part 3.)
-
-Notice that the allocation unit is now a row of 8x8 blocks, corresponding to
-eight rows of samples. Otherwise the structure is much the same as for
-samples, and for the same reasons.
-
-On machines where malloc() can't handle a request bigger than 64Kb, this data
-structure limits us to rows of less than 512 JBLOCKs, or a picture width of
-4000+ pixels. This seems an acceptable restriction.
-
-
-On 80x86 machines, the bottom-level pointer types (JSAMPROW and JBLOCKROW)
-must be declared as "far" pointers, but the upper levels can be "near"
-(implying that the pointer lists are allocated in the DS segment).
-We use a #define symbol FAR, which expands to the "far" keyword when
-compiling on 80x86 machines and to nothing elsewhere.
-
-
-*** Suspendable processing ***
-
-In some applications it is desirable to use the JPEG library as an
-incremental, memory-to-memory filter. In this situation the data source or
-destination may be a limited-size buffer, and we can't rely on being able to
-empty or refill the buffer at arbitrary times. Instead the application would
-like to have control return from the library at buffer overflow/underrun, and
-then resume compression or decompression at a later time.
-
-This scenario is supported for simple cases. (For anything more complex, we
-recommend that the application "bite the bullet" and develop real multitasking
-capability.) The libjpeg.doc file goes into more detail about the usage and
-limitations of this capability; here we address the implications for library
-structure.
-
-The essence of the problem is that the entropy codec (coder or decoder) must
-be prepared to stop at arbitrary times. In turn, the controllers that call
-the entropy codec must be able to stop before having produced or consumed all
-the data that they normally would handle in one call. That part is reasonably
-straightforward: we make the controller call interfaces include "progress
-counters" which indicate the number of data chunks successfully processed, and
-we require callers to test the counter rather than just assume all of the data
-was processed.
-
-Rather than trying to restart at an arbitrary point, the current Huffman
-codecs are designed to restart at the beginning of the current MCU after a
-suspension due to buffer overflow/underrun. At the start of each call, the
-codec's internal state is loaded from permanent storage (in the JPEG object
-structures) into local variables. On successful completion of the MCU, the
-permanent state is updated. (This copying is not very expensive, and may even
-lead to *improved* performance if the local variables can be registerized.)
-If a suspension occurs, the codec simply returns without updating the state,
-thus effectively reverting to the start of the MCU. Note that this implies
-leaving some data unprocessed in the source/destination buffer (ie, the
-compressed partial MCU). The data source/destination module interfaces are
-specified so as to make this possible. This also implies that the data buffer
-must be large enough to hold a worst-case compressed MCU; a couple thousand
-bytes should be enough.
-
-In a successive-approximation AC refinement scan, the progressive Huffman
-decoder has to be able to undo assignments of newly nonzero coefficients if it
-suspends before the MCU is complete, since decoding requires distinguishing
-previously-zero and previously-nonzero coefficients. This is a bit tedious
-but probably won't have much effect on performance. Other variants of Huffman
-decoding need not worry about this, since they will just store the same values
-again if forced to repeat the MCU.
-
-This approach would probably not work for an arithmetic codec, since its
-modifiable state is quite large and couldn't be copied cheaply. Instead it
-would have to suspend and resume exactly at the point of the buffer end.
-
-The JPEG marker reader is designed to cope with suspension at an arbitrary
-point. It does so by backing up to the start of the marker parameter segment,
-so the data buffer must be big enough to hold the largest marker of interest.
-Again, a couple KB should be adequate. (A special "skip" convention is used
-to bypass COM and APPn markers, so these can be larger than the buffer size
-without causing problems; otherwise a 64K buffer would be needed in the worst
-case.)
-
-The JPEG marker writer currently does *not* cope with suspension. I feel that
-this is not necessary; it is much easier simply to require the application to
-ensure there is enough buffer space before starting. (An empty 2K buffer is
-more than sufficient for the header markers; and ensuring there are a dozen or
-two bytes available before calling jpeg_finish_compress() will suffice for the
-trailer.) This would not work for writing multi-scan JPEG files, but
-we simply do not intend to support that capability with suspension.
-
-
-*** Memory manager services ***
-
-The JPEG library's memory manager controls allocation and deallocation of
-memory, and it manages large "virtual" data arrays on machines where the
-operating system does not provide virtual memory. Note that the same
-memory manager serves both compression and decompression operations.
-
-In all cases, allocated objects are tied to a particular compression or
-decompression master record, and they will be released when that master
-record is destroyed.
-
-The memory manager does not provide explicit deallocation of objects.
-Instead, objects are created in "pools" of free storage, and a whole pool
-can be freed at once. This approach helps prevent storage-leak bugs, and
-it speeds up operations whenever malloc/free are slow (as they often are).
-The pools can be regarded as lifetime identifiers for objects. Two
-pools/lifetimes are defined:
- * JPOOL_PERMANENT lasts until master record is destroyed
- * JPOOL_IMAGE lasts until done with image (JPEG datastream)
-Permanent lifetime is used for parameters and tables that should be carried
-across from one datastream to another; this includes all application-visible
-parameters. Image lifetime is used for everything else. (A third lifetime,
-JPOOL_PASS = one processing pass, was originally planned. However it was
-dropped as not being worthwhile. The actual usage patterns are such that the
-peak memory usage would be about the same anyway; and having per-pass storage
-substantially complicates the virtual memory allocation rules --- see below.)
-
-The memory manager deals with three kinds of object:
-1. "Small" objects. Typically these require no more than 10K-20K total.
-2. "Large" objects. These may require tens to hundreds of K depending on
- image size. Semantically they behave the same as small objects, but we
- distinguish them for two reasons:
- * On MS-DOS machines, large objects are referenced by FAR pointers,
- small objects by NEAR pointers.
- * Pool allocation heuristics may differ for large and small objects.
- Note that individual "large" objects cannot exceed the size allowed by
- type size_t, which may be 64K or less on some machines.
-3. "Virtual" objects. These are large 2-D arrays of JSAMPLEs or JBLOCKs
- (typically large enough for the entire image being processed). The
- memory manager provides stripwise access to these arrays. On machines
- without virtual memory, the rest of the array may be swapped out to a
- temporary file.
-
-(Note: JSAMPARRAY and JBLOCKARRAY data structures are a combination of large
-objects for the data proper and small objects for the row pointers. For
-convenience and speed, the memory manager provides single routines to create
-these structures. Similarly, virtual arrays include a small control block
-and a JSAMPARRAY or JBLOCKARRAY working buffer, all created with one call.)
-
-In the present implementation, virtual arrays are only permitted to have image
-lifespan. (Permanent lifespan would not be reasonable, and pass lifespan is
-not very useful since a virtual array's raison d'etre is to store data for
-multiple passes through the image.) We also expect that only "small" objects
-will be given permanent lifespan, though this restriction is not required by
-the memory manager.
-
-In a non-virtual-memory machine, some performance benefit can be gained by
-making the in-memory buffers for virtual arrays be as large as possible.
-(For small images, the buffers might fit entirely in memory, so blind
-swapping would be very wasteful.) The memory manager will adjust the height
-of the buffers to fit within a prespecified maximum memory usage. In order
-to do this in a reasonably optimal fashion, the manager needs to allocate all
-of the virtual arrays at once. Therefore, there isn't a one-step allocation
-routine for virtual arrays; instead, there is a "request" routine that simply
-allocates the control block, and a "realize" routine (called just once) that
-determines space allocation and creates all of the actual buffers. The
-realize routine must allow for space occupied by non-virtual large objects.
-(We don't bother to factor in the space needed for small objects, on the
-grounds that it isn't worth the trouble.)
-
-To support all this, we establish the following protocol for doing business
-with the memory manager:
- 1. Modules must request virtual arrays (which may have only image lifespan)
- during the initial setup phase, i.e., in their jinit_xxx routines.
- 2. All "large" objects (including JSAMPARRAYs and JBLOCKARRAYs) must also be
- allocated during initial setup.
- 3. realize_virt_arrays will be called at the completion of initial setup.
- The above conventions ensure that sufficient information is available
- for it to choose a good size for virtual array buffers.
-Small objects of any lifespan may be allocated at any time. We expect that
-the total space used for small objects will be small enough to be negligible
-in the realize_virt_arrays computation.
-
-In a virtual-memory machine, we simply pretend that the available space is
-infinite, thus causing realize_virt_arrays to decide that it can allocate all
-the virtual arrays as full-size in-memory buffers. The overhead of the
-virtual-array access protocol is very small when no swapping occurs.
-
-A virtual array can be specified to be "pre-zeroed"; when this flag is set,
-never-yet-written sections of the array are set to zero before being made
-available to the caller. If this flag is not set, never-written sections
-of the array contain garbage. (This feature exists primarily because the
-equivalent logic would otherwise be needed in jdcoefct.c for progressive
-JPEG mode; we may as well make it available for possible other uses.)
-
-The first write pass on a virtual array is required to occur in top-to-bottom
-order; read passes, as well as any write passes after the first one, may
-access the array in any order. This restriction exists partly to simplify
-the virtual array control logic, and partly because some file systems may not
-support seeking beyond the current end-of-file in a temporary file. The main
-implication of this restriction is that rearrangement of rows (such as
-converting top-to-bottom data order to bottom-to-top) must be handled while
-reading data out of the virtual array, not while putting it in.
-
-
-*** Memory manager internal structure ***
-
-To isolate system dependencies as much as possible, we have broken the
-memory manager into two parts. There is a reasonably system-independent
-"front end" (jmemmgr.c) and a "back end" that contains only the code
-likely to change across systems. All of the memory management methods
-outlined above are implemented by the front end. The back end provides
-the following routines for use by the front end (none of these routines
-are known to the rest of the JPEG code):
-
-jpeg_mem_init, jpeg_mem_term system-dependent initialization/shutdown
-
-jpeg_get_small, jpeg_free_small interface to malloc and free library routines
- (or their equivalents)
-
-jpeg_get_large, jpeg_free_large interface to FAR malloc/free in MSDOS machines;
- else usually the same as
- jpeg_get_small/jpeg_free_small
-
-jpeg_mem_available estimate available memory
-
-jpeg_open_backing_store create a backing-store object
-
-read_backing_store, manipulate a backing-store object
-write_backing_store,
-close_backing_store
-
-On some systems there will be more than one type of backing-store object
-(specifically, in MS-DOS a backing store file might be an area of extended
-memory as well as a disk file). jpeg_open_backing_store is responsible for
-choosing how to implement a given object. The read/write/close routines
-are method pointers in the structure that describes a given object; this
-lets them be different for different object types.
-
-It may be necessary to ensure that backing store objects are explicitly
-released upon abnormal program termination. For example, MS-DOS won't free
-extended memory by itself. To support this, we will expect the main program
-or surrounding application to arrange to call self_destruct (typically via
-jpeg_destroy) upon abnormal termination. This may require a SIGINT signal
-handler or equivalent. We don't want to have the back end module install its
-own signal handler, because that would pre-empt the surrounding application's
-ability to control signal handling.
-
-The IJG distribution includes several memory manager back end implementations.
-Usually the same back end should be suitable for all applications on a given
-system, but it is possible for an application to supply its own back end at
-need.
-
-
-*** Implications of DNL marker ***
-
-Some JPEG files may use a DNL marker to postpone definition of the image
-height (this would be useful for a fax-like scanner's output, for instance).
-In these files the SOF marker claims the image height is 0, and you only
-find out the true image height at the end of the first scan.
-
-We could read these files as follows:
-1. Upon seeing zero image height, replace it by 65535 (the maximum allowed).
-2. When the DNL is found, update the image height in the global image
- descriptor.
-This implies that control modules must avoid making copies of the image
-height, and must re-test for termination after each MCU row. This would
-be easy enough to do.
-
-In cases where image-size data structures are allocated, this approach will
-result in very inefficient use of virtual memory or much-larger-than-necessary
-temporary files. This seems acceptable for something that probably won't be a
-mainstream usage. People might have to forgo use of memory-hogging options
-(such as two-pass color quantization or noninterleaved JPEG files) if they
-want efficient conversion of such files. (One could improve efficiency by
-demanding a user-supplied upper bound for the height, less than 65536; in most
-cases it could be much less.)
-
-The standard also permits the SOF marker to overestimate the image height,
-with a DNL to give the true, smaller height at the end of the first scan.
-This would solve the space problems if the overestimate wasn't too great.
-However, it implies that you don't even know whether DNL will be used.
-
-This leads to a couple of very serious objections:
-1. Testing for a DNL marker must occur in the inner loop of the decompressor's
- Huffman decoder; this implies a speed penalty whether the feature is used
- or not.
-2. There is no way to hide the last-minute change in image height from an
- application using the decoder. Thus *every* application using the IJG
- library would suffer a complexity penalty whether it cared about DNL or
- not.
-We currently do not support DNL because of these problems.
-
-A different approach is to insist that DNL-using files be preprocessed by a
-separate program that reads ahead to the DNL, then goes back and fixes the SOF
-marker. This is a much simpler solution and is probably far more efficient.
-Even if one wants piped input, buffering the first scan of the JPEG file needs
-a lot smaller temp file than is implied by the maximum-height method. For
-this approach we'd simply treat DNL as a no-op in the decompressor (at most,
-check that it matches the SOF image height).
-
-We will not worry about making the compressor capable of outputting DNL.
-Something similar to the first scheme above could be applied if anyone ever
-wants to make that work.