summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Android.mk1
-rw-r--r--applypatch/Android.mk59
-rw-r--r--applypatch/applypatch.c900
-rw-r--r--applypatch/applypatch.h70
-rwxr-xr-xapplypatch/applypatch.sh345
-rw-r--r--applypatch/bsdiff.c410
-rw-r--r--applypatch/bspatch.c252
-rw-r--r--applypatch/freecache.c172
-rw-r--r--applypatch/imgdiff.c1010
-rw-r--r--applypatch/imgdiff.h30
-rwxr-xr-xapplypatch/imgdiff_test.sh118
-rw-r--r--applypatch/imgpatch.c364
-rw-r--r--applypatch/main.c60
-rw-r--r--applypatch/testdata/new.filebin0 -> 1388877 bytes
-rw-r--r--applypatch/testdata/old.filebin0 -> 1348051 bytes
-rw-r--r--applypatch/testdata/patch.bsdiffbin0 -> 57476 bytes
-rw-r--r--applypatch/utils.c62
-rw-r--r--applypatch/utils.h30
-rw-r--r--edify/expr.c161
-rw-r--r--edify/expr.h65
-rw-r--r--updater/install.c236
-rw-r--r--updater/updater.c6
22 files changed, 4239 insertions, 112 deletions
diff --git a/Android.mk b/Android.mk
index 5f7406466..c556db36b 100644
--- a/Android.mk
+++ b/Android.mk
@@ -65,6 +65,7 @@ include $(commands_recovery_local_path)/mtdutils/Android.mk
include $(commands_recovery_local_path)/tools/Android.mk
include $(commands_recovery_local_path)/edify/Android.mk
include $(commands_recovery_local_path)/updater/Android.mk
+include $(commands_recovery_local_path)/applypatch/Android.mk
commands_recovery_local_path :=
endif # TARGET_ARCH == arm
diff --git a/applypatch/Android.mk b/applypatch/Android.mk
new file mode 100644
index 000000000..d20d6c8f1
--- /dev/null
+++ b/applypatch/Android.mk
@@ -0,0 +1,59 @@
+# Copyright (C) 2008 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+ifneq ($(TARGET_SIMULATOR),true)
+
+LOCAL_PATH := $(call my-dir)
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES := applypatch.c bspatch.c freecache.c imgpatch.c utils.c
+LOCAL_MODULE := libapplypatch
+LOCAL_MODULE_TAGS := eng
+LOCAL_C_INCLUDES += external/bzip2 external/zlib bootable/recovery
+LOCAL_STATIC_LIBRARIES += libmtdutils libmincrypt libbz libz
+
+include $(BUILD_STATIC_LIBRARY)
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES := main.c
+LOCAL_MODULE := applypatch
+LOCAL_STATIC_LIBRARIES += libapplypatch libmtdutils libmincrypt libbz
+LOCAL_SHARED_LIBRARIES += libz libcutils libstdc++ libc
+
+include $(BUILD_EXECUTABLE)
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES := main.c
+LOCAL_MODULE := applypatch_static
+LOCAL_FORCE_STATIC_EXECUTABLE := true
+LOCAL_MODULE_TAGS := eng
+LOCAL_STATIC_LIBRARIES += libapplypatch libmtdutils libmincrypt libbz
+LOCAL_STATIC_LIBRARIES += libz libcutils libstdc++ libc
+
+include $(BUILD_EXECUTABLE)
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES := imgdiff.c utils.c bsdiff.c
+LOCAL_MODULE := imgdiff
+LOCAL_FORCE_STATIC_EXECUTABLE := true
+LOCAL_MODULE_TAGS := eng
+LOCAL_C_INCLUDES += external/zlib external/bzip2
+LOCAL_STATIC_LIBRARIES += libz libbz
+
+include $(BUILD_HOST_EXECUTABLE)
+
+endif # !TARGET_SIMULATOR
diff --git a/applypatch/applypatch.c b/applypatch/applypatch.c
new file mode 100644
index 000000000..daf372907
--- /dev/null
+++ b/applypatch/applypatch.c
@@ -0,0 +1,900 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <errno.h>
+#include <libgen.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <sys/statfs.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+#include "mincrypt/sha.h"
+#include "applypatch.h"
+#include "mtdutils/mtdutils.h"
+
+int SaveFileContents(const char* filename, FileContents file);
+int LoadMTDContents(const char* filename, FileContents* file);
+int ParseSha1(const char* str, uint8_t* digest);
+ssize_t FileSink(unsigned char* data, ssize_t len, void* token);
+
+static int mtd_partitions_scanned = 0;
+
+// Read a file into memory; store it and its associated metadata in
+// *file. Return 0 on success.
+int LoadFileContents(const char* filename, FileContents* file) {
+ file->data = NULL;
+
+ // A special 'filename' beginning with "MTD:" means to load the
+ // contents of an MTD partition.
+ if (strncmp(filename, "MTD:", 4) == 0) {
+ return LoadMTDContents(filename, file);
+ }
+
+ if (stat(filename, &file->st) != 0) {
+ printf("failed to stat \"%s\": %s\n", filename, strerror(errno));
+ return -1;
+ }
+
+ file->size = file->st.st_size;
+ file->data = malloc(file->size);
+
+ FILE* f = fopen(filename, "rb");
+ if (f == NULL) {
+ printf("failed to open \"%s\": %s\n", filename, strerror(errno));
+ free(file->data);
+ file->data = NULL;
+ return -1;
+ }
+
+ size_t bytes_read = fread(file->data, 1, file->size, f);
+ if (bytes_read != file->size) {
+ printf("short read of \"%s\" (%d bytes of %d)\n",
+ filename, bytes_read, file->size);
+ free(file->data);
+ file->data = NULL;
+ return -1;
+ }
+ fclose(f);
+
+ SHA(file->data, file->size, file->sha1);
+ return 0;
+}
+
+static size_t* size_array;
+// comparison function for qsort()ing an int array of indexes into
+// size_array[].
+static int compare_size_indices(const void* a, const void* b) {
+ int aa = *(int*)a;
+ int bb = *(int*)b;
+ if (size_array[aa] < size_array[bb]) {
+ return -1;
+ } else if (size_array[aa] > size_array[bb]) {
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+void FreeFileContents(FileContents* file) {
+ if (file) free(file->data);
+ free(file);
+}
+
+// Load the contents of an MTD partition into the provided
+// FileContents. filename should be a string of the form
+// "MTD:<partition_name>:<size_1>:<sha1_1>:<size_2>:<sha1_2>:...".
+// The smallest size_n bytes for which that prefix of the mtd contents
+// has the corresponding sha1 hash will be loaded. It is acceptable
+// for a size value to be repeated with different sha1s. Will return
+// 0 on success.
+//
+// This complexity is needed because if an OTA installation is
+// interrupted, the partition might contain either the source or the
+// target data, which might be of different lengths. We need to know
+// the length in order to read from MTD (there is no "end-of-file"
+// marker), so the caller must specify the possible lengths and the
+// hash of the data, and we'll do the load expecting to find one of
+// those hashes.
+int LoadMTDContents(const char* filename, FileContents* file) {
+ char* copy = strdup(filename);
+ const char* magic = strtok(copy, ":");
+ if (strcmp(magic, "MTD") != 0) {
+ printf("LoadMTDContents called with bad filename (%s)\n",
+ filename);
+ return -1;
+ }
+ const char* partition = strtok(NULL, ":");
+
+ int i;
+ int colons = 0;
+ for (i = 0; filename[i] != '\0'; ++i) {
+ if (filename[i] == ':') {
+ ++colons;
+ }
+ }
+ if (colons < 3 || colons%2 == 0) {
+ printf("LoadMTDContents called with bad filename (%s)\n",
+ filename);
+ }
+
+ int pairs = (colons-1)/2; // # of (size,sha1) pairs in filename
+ int* index = malloc(pairs * sizeof(int));
+ size_t* size = malloc(pairs * sizeof(size_t));
+ char** sha1sum = malloc(pairs * sizeof(char*));
+
+ for (i = 0; i < pairs; ++i) {
+ const char* size_str = strtok(NULL, ":");
+ size[i] = strtol(size_str, NULL, 10);
+ if (size[i] == 0) {
+ printf("LoadMTDContents called with bad size (%s)\n", filename);
+ return -1;
+ }
+ sha1sum[i] = strtok(NULL, ":");
+ index[i] = i;
+ }
+
+ // sort the index[] array so it indexes the pairs in order of
+ // increasing size.
+ size_array = size;
+ qsort(index, pairs, sizeof(int), compare_size_indices);
+
+ if (!mtd_partitions_scanned) {
+ mtd_scan_partitions();
+ mtd_partitions_scanned = 1;
+ }
+
+ const MtdPartition* mtd = mtd_find_partition_by_name(partition);
+ if (mtd == NULL) {
+ printf("mtd partition \"%s\" not found (loading %s)\n",
+ partition, filename);
+ return -1;
+ }
+
+ MtdReadContext* ctx = mtd_read_partition(mtd);
+ if (ctx == NULL) {
+ printf("failed to initialize read of mtd partition \"%s\"\n",
+ partition);
+ return -1;
+ }
+
+ SHA_CTX sha_ctx;
+ SHA_init(&sha_ctx);
+ uint8_t parsed_sha[SHA_DIGEST_SIZE];
+
+ // allocate enough memory to hold the largest size.
+ file->data = malloc(size[index[pairs-1]]);
+ char* p = (char*)file->data;
+ file->size = 0; // # bytes read so far
+
+ for (i = 0; i < pairs; ++i) {
+ // Read enough additional bytes to get us up to the next size
+ // (again, we're trying the possibilities in order of increasing
+ // size).
+ size_t next = size[index[i]] - file->size;
+ size_t read = 0;
+ if (next > 0) {
+ read = mtd_read_data(ctx, p, next);
+ if (next != read) {
+ printf("short read (%d bytes of %d) for partition \"%s\"\n",
+ read, next, partition);
+ free(file->data);
+ file->data = NULL;
+ return -1;
+ }
+ SHA_update(&sha_ctx, p, read);
+ file->size += read;
+ }
+
+ // Duplicate the SHA context and finalize the duplicate so we can
+ // check it against this pair's expected hash.
+ SHA_CTX temp_ctx;
+ memcpy(&temp_ctx, &sha_ctx, sizeof(SHA_CTX));
+ const uint8_t* sha_so_far = SHA_final(&temp_ctx);
+
+ if (ParseSha1(sha1sum[index[i]], parsed_sha) != 0) {
+ printf("failed to parse sha1 %s in %s\n",
+ sha1sum[index[i]], filename);
+ free(file->data);
+ file->data = NULL;
+ return -1;
+ }
+
+ if (memcmp(sha_so_far, parsed_sha, SHA_DIGEST_SIZE) == 0) {
+ // we have a match. stop reading the partition; we'll return
+ // the data we've read so far.
+ printf("mtd read matched size %d sha %s\n",
+ size[index[i]], sha1sum[index[i]]);
+ break;
+ }
+
+ p += read;
+ }
+
+ mtd_read_close(ctx);
+
+ if (i == pairs) {
+ // Ran off the end of the list of (size,sha1) pairs without
+ // finding a match.
+ printf("contents of MTD partition \"%s\" didn't match %s\n",
+ partition, filename);
+ free(file->data);
+ file->data = NULL;
+ return -1;
+ }
+
+ const uint8_t* sha_final = SHA_final(&sha_ctx);
+ for (i = 0; i < SHA_DIGEST_SIZE; ++i) {
+ file->sha1[i] = sha_final[i];
+ }
+
+ // Fake some stat() info.
+ file->st.st_mode = 0644;
+ file->st.st_uid = 0;
+ file->st.st_gid = 0;
+
+ free(copy);
+ free(index);
+ free(size);
+ free(sha1sum);
+
+ return 0;
+}
+
+
+// Save the contents of the given FileContents object under the given
+// filename. Return 0 on success.
+int SaveFileContents(const char* filename, FileContents file) {
+ int fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC);
+ if (fd < 0) {
+ printf("failed to open \"%s\" for write: %s\n",
+ filename, strerror(errno));
+ return -1;
+ }
+
+ size_t bytes_written = FileSink(file.data, file.size, &fd);
+ if (bytes_written != file.size) {
+ printf("short write of \"%s\" (%d bytes of %d) (%s)\n",
+ filename, bytes_written, file.size, strerror(errno));
+ close(fd);
+ return -1;
+ }
+ fsync(fd);
+ close(fd);
+
+ if (chmod(filename, file.st.st_mode) != 0) {
+ printf("chmod of \"%s\" failed: %s\n", filename, strerror(errno));
+ return -1;
+ }
+ if (chown(filename, file.st.st_uid, file.st.st_gid) != 0) {
+ printf("chown of \"%s\" failed: %s\n", filename, strerror(errno));
+ return -1;
+ }
+
+ return 0;
+}
+
+// Write a memory buffer to target_mtd partition, a string of the form
+// "MTD:<partition>[:...]". Return 0 on success.
+int WriteToMTDPartition(unsigned char* data, size_t len,
+ const char* target_mtd) {
+ char* partition = strchr(target_mtd, ':');
+ if (partition == NULL) {
+ printf("bad MTD target name \"%s\"\n", target_mtd);
+ return -1;
+ }
+ ++partition;
+ // Trim off anything after a colon, eg "MTD:boot:blah:blah:blah...".
+ // We want just the partition name "boot".
+ partition = strdup(partition);
+ char* end = strchr(partition, ':');
+ if (end != NULL)
+ *end = '\0';
+
+ if (!mtd_partitions_scanned) {
+ mtd_scan_partitions();
+ mtd_partitions_scanned = 1;
+ }
+
+ const MtdPartition* mtd = mtd_find_partition_by_name(partition);
+ if (mtd == NULL) {
+ printf("mtd partition \"%s\" not found for writing\n", partition);
+ return -1;
+ }
+
+ MtdWriteContext* ctx = mtd_write_partition(mtd);
+ if (ctx == NULL) {
+ printf("failed to init mtd partition \"%s\" for writing\n",
+ partition);
+ return -1;
+ }
+
+ size_t written = mtd_write_data(ctx, (char*)data, len);
+ if (written != len) {
+ printf("only wrote %d of %d bytes to MTD %s\n",
+ written, len, partition);
+ mtd_write_close(ctx);
+ return -1;
+ }
+
+ if (mtd_erase_blocks(ctx, -1) < 0) {
+ printf("error finishing mtd write of %s\n", partition);
+ mtd_write_close(ctx);
+ return -1;
+ }
+
+ if (mtd_write_close(ctx)) {
+ printf("error closing mtd write of %s\n", partition);
+ return -1;
+ }
+
+ free(partition);
+ return 0;
+}
+
+
+// Take a string 'str' of 40 hex digits and parse it into the 20
+// byte array 'digest'. 'str' may contain only the digest or be of
+// the form "<digest>:<anything>". Return 0 on success, -1 on any
+// error.
+int ParseSha1(const char* str, uint8_t* digest) {
+ int i;
+ const char* ps = str;
+ uint8_t* pd = digest;
+ for (i = 0; i < SHA_DIGEST_SIZE * 2; ++i, ++ps) {
+ int digit;
+ if (*ps >= '0' && *ps <= '9') {
+ digit = *ps - '0';
+ } else if (*ps >= 'a' && *ps <= 'f') {
+ digit = *ps - 'a' + 10;
+ } else if (*ps >= 'A' && *ps <= 'F') {
+ digit = *ps - 'A' + 10;
+ } else {
+ return -1;
+ }
+ if (i % 2 == 0) {
+ *pd = digit << 4;
+ } else {
+ *pd |= digit;
+ ++pd;
+ }
+ }
+ if (*ps != '\0' && *ps != ':') return -1;
+ return 0;
+}
+
+// Parse arguments (which should be of the form "<sha1>" or
+// "<sha1>:<filename>" into the array *patches, returning the number
+// of Patch objects in *num_patches. Return 0 on success.
+int ParseShaArgs(int argc, char** argv, Patch** patches, int* num_patches) {
+ *num_patches = argc;
+ *patches = malloc(*num_patches * sizeof(Patch));
+
+ int i;
+ for (i = 0; i < *num_patches; ++i) {
+ if (ParseSha1(argv[i], (*patches)[i].sha1) != 0) {
+ printf("failed to parse sha1 \"%s\"\n", argv[i]);
+ return -1;
+ }
+ if (argv[i][SHA_DIGEST_SIZE*2] == '\0') {
+ (*patches)[i].patch_filename = NULL;
+ } else if (argv[i][SHA_DIGEST_SIZE*2] == ':') {
+ (*patches)[i].patch_filename = argv[i] + (SHA_DIGEST_SIZE*2+1);
+ } else {
+ printf("failed to parse filename \"%s\"\n", argv[i]);
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+// Search an array of Patch objects for one matching the given sha1.
+// Return the Patch object on success, or NULL if no match is found.
+const Patch* FindMatchingPatch(uint8_t* sha1, Patch* patches, int num_patches) {
+ int i;
+ for (i = 0; i < num_patches; ++i) {
+ if (memcmp(patches[i].sha1, sha1, SHA_DIGEST_SIZE) == 0) {
+ return patches+i;
+ }
+ }
+ return NULL;
+}
+
+// Returns 0 if the contents of the file (argv[2]) or the cached file
+// match any of the sha1's on the command line (argv[3:]). Returns
+// nonzero otherwise.
+int CheckMode(int argc, char** argv) {
+ if (argc < 3) {
+ printf("no filename given\n");
+ return 2;
+ }
+
+ int num_patches;
+ Patch* patches;
+ if (ParseShaArgs(argc-3, argv+3, &patches, &num_patches) != 0) { return 1; }
+
+ FileContents file;
+ file.data = NULL;
+
+ // It's okay to specify no sha1s; the check will pass if the
+ // LoadFileContents is successful. (Useful for reading MTD
+ // partitions, where the filename encodes the sha1s; no need to
+ // check them twice.)
+ if (LoadFileContents(argv[2], &file) != 0 ||
+ (num_patches > 0 &&
+ FindMatchingPatch(file.sha1, patches, num_patches) == NULL)) {
+ printf("file \"%s\" doesn't have any of expected "
+ "sha1 sums; checking cache\n", argv[2]);
+
+ free(file.data);
+
+ // If the source file is missing or corrupted, it might be because
+ // we were killed in the middle of patching it. A copy of it
+ // should have been made in CACHE_TEMP_SOURCE. If that file
+ // exists and matches the sha1 we're looking for, the check still
+ // passes.
+
+ if (LoadFileContents(CACHE_TEMP_SOURCE, &file) != 0) {
+ printf("failed to load cache file\n");
+ return 1;
+ }
+
+ if (FindMatchingPatch(file.sha1, patches, num_patches) == NULL) {
+ printf("cache bits don't match any sha1 for \"%s\"\n",
+ argv[2]);
+ return 1;
+ }
+ }
+
+ free(file.data);
+ return 0;
+}
+
+int ShowLicenses() {
+ ShowBSDiffLicense();
+ return 0;
+}
+
+ssize_t FileSink(unsigned char* data, ssize_t len, void* token) {
+ int fd = *(int *)token;
+ ssize_t done = 0;
+ ssize_t wrote;
+ while (done < (ssize_t) len) {
+ wrote = write(fd, data+done, len-done);
+ if (wrote <= 0) {
+ printf("error writing %d bytes: %s\n", (int)(len-done), strerror(errno));
+ return done;
+ }
+ done += wrote;
+ }
+ printf("wrote %d bytes to output\n", (int)done);
+ return done;
+}
+
+typedef struct {
+ unsigned char* buffer;
+ ssize_t size;
+ ssize_t pos;
+} MemorySinkInfo;
+
+ssize_t MemorySink(unsigned char* data, ssize_t len, void* token) {
+ MemorySinkInfo* msi = (MemorySinkInfo*)token;
+ if (msi->size - msi->pos < len) {
+ return -1;
+ }
+ memcpy(msi->buffer + msi->pos, data, len);
+ msi->pos += len;
+ return len;
+}
+
+// Return the amount of free space (in bytes) on the filesystem
+// containing filename. filename must exist. Return -1 on error.
+size_t FreeSpaceForFile(const char* filename) {
+ struct statfs sf;
+ if (statfs(filename, &sf) != 0) {
+ printf("failed to statfs %s: %s\n", filename, strerror(errno));
+ return -1;
+ }
+ return sf.f_bsize * sf.f_bfree;
+}
+
+// This program applies binary patches to files in a way that is safe
+// (the original file is not touched until we have the desired
+// replacement for it) and idempotent (it's okay to run this program
+// multiple times).
+//
+// - if the sha1 hash of <tgt-file> is <tgt-sha1>, does nothing and exits
+// successfully.
+//
+// - otherwise, if the sha1 hash of <src-file> is <src-sha1>, applies the
+// bsdiff <patch> to <src-file> to produce a new file (the type of patch
+// is automatically detected from the file header). If that new
+// file has sha1 hash <tgt-sha1>, moves it to replace <tgt-file>, and
+// exits successfully. Note that if <src-file> and <tgt-file> are
+// not the same, <src-file> is NOT deleted on success. <tgt-file>
+// may be the string "-" to mean "the same as src-file".
+//
+// - otherwise, or if any error is encountered, exits with non-zero
+// status.
+//
+// <src-file> (or <file> in check mode) may refer to an MTD partition
+// to read the source data. See the comments for the
+// LoadMTDContents() function above for the format of such a filename.
+//
+//
+// As you might guess from the arguments, this function used to be
+// main(); it was split out this way so applypatch could be built as a
+// static library and linked into other executables as well. In the
+// future only the library form will exist; we will not need to build
+// this as a standalone executable.
+//
+// The arguments to this function are just the command-line of the
+// standalone executable:
+//
+// <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...]
+// to apply a patch. Returns 0 on success, 1 on failure.
+//
+// "-c" <file> [<sha1> ...]
+// to check a file's contents against zero or more sha1s. Returns
+// 0 if it matches any of them, 1 if it doesn't.
+//
+// "-s" <bytes>
+// returns 0 if enough free space is available on /cache; 1 if it
+// does not.
+//
+// "-l"
+// shows open-source license information and returns 0.
+//
+// This function returns 2 if the arguments are not understood (in the
+// standalone executable, this causes the usage message to be
+// printed).
+//
+// TODO: make the interface more sensible for use as a library.
+
+int applypatch(int argc, char** argv) {
+ if (argc < 2) {
+ return 2;
+ }
+
+ if (strncmp(argv[1], "-l", 3) == 0) {
+ return ShowLicenses();
+ }
+
+ if (strncmp(argv[1], "-c", 3) == 0) {
+ return CheckMode(argc, argv);
+ }
+
+ if (strncmp(argv[1], "-s", 3) == 0) {
+ if (argc != 3) {
+ return 2;
+ }
+ size_t bytes = strtol(argv[2], NULL, 10);
+ if (MakeFreeSpaceOnCache(bytes) < 0) {
+ printf("unable to make %ld bytes available on /cache\n", (long)bytes);
+ return 1;
+ } else {
+ return 0;
+ }
+ }
+
+ uint8_t target_sha1[SHA_DIGEST_SIZE];
+
+ const char* source_filename = argv[1];
+ const char* target_filename = argv[2];
+ if (target_filename[0] == '-' &&
+ target_filename[1] == '\0') {
+ target_filename = source_filename;
+ }
+
+ printf("\napplying patch to %s\n", source_filename);
+
+ if (ParseSha1(argv[3], target_sha1) != 0) {
+ printf("failed to parse tgt-sha1 \"%s\"\n", argv[3]);
+ return 1;
+ }
+
+ unsigned long target_size = strtoul(argv[4], NULL, 0);
+
+ int num_patches;
+ Patch* patches;
+ if (ParseShaArgs(argc-5, argv+5, &patches, &num_patches) < 0) { return 1; }
+
+ FileContents copy_file;
+ FileContents source_file;
+ const char* source_patch_filename = NULL;
+ const char* copy_patch_filename = NULL;
+ int made_copy = 0;
+
+ // We try to load the target file into the source_file object.
+ if (LoadFileContents(target_filename, &source_file) == 0) {
+ if (memcmp(source_file.sha1, target_sha1, SHA_DIGEST_SIZE) == 0) {
+ // The early-exit case: the patch was already applied, this file
+ // has the desired hash, nothing for us to do.
+ printf("\"%s\" is already target; no patch needed\n",
+ target_filename);
+ return 0;
+ }
+ }
+
+ if (source_file.data == NULL ||
+ (target_filename != source_filename &&
+ strcmp(target_filename, source_filename) != 0)) {
+ // Need to load the source file: either we failed to load the
+ // target file, or we did but it's different from the source file.
+ free(source_file.data);
+ LoadFileContents(source_filename, &source_file);
+ }
+
+ if (source_file.data != NULL) {
+ const Patch* to_use =
+ FindMatchingPatch(source_file.sha1, patches, num_patches);
+ if (to_use != NULL) {
+ source_patch_filename = to_use->patch_filename;
+ }
+ }
+
+ if (source_patch_filename == NULL) {
+ free(source_file.data);
+ printf("source file is bad; trying copy\n");
+
+ if (LoadFileContents(CACHE_TEMP_SOURCE, &copy_file) < 0) {
+ // fail.
+ printf("failed to read copy file\n");
+ return 1;
+ }
+
+ const Patch* to_use =
+ FindMatchingPatch(copy_file.sha1, patches, num_patches);
+ if (to_use != NULL) {
+ copy_patch_filename = to_use->patch_filename;
+ }
+
+ if (copy_patch_filename == NULL) {
+ // fail.
+ printf("copy file doesn't match source SHA-1s either\n");
+ return 1;
+ }
+ }
+
+ int retry = 1;
+ SHA_CTX ctx;
+ int output;
+ MemorySinkInfo msi;
+ FileContents* source_to_use;
+ char* outname;
+
+ // assume that target_filename (eg "/system/app/Foo.apk") is located
+ // on the same filesystem as its top-level directory ("/system").
+ // We need something that exists for calling statfs().
+ char target_fs[strlen(target_filename)+1];
+ char* slash = strchr(target_filename+1, '/');
+ if (slash != NULL) {
+ int count = slash - target_filename;
+ strncpy(target_fs, target_filename, count);
+ target_fs[count] = '\0';
+ } else {
+ strcpy(target_fs, target_filename);
+ }
+
+ do {
+ // Is there enough room in the target filesystem to hold the patched
+ // file?
+
+ if (strncmp(target_filename, "MTD:", 4) == 0) {
+ // If the target is an MTD partition, we're actually going to
+ // write the output to /tmp and then copy it to the partition.
+ // statfs() always returns 0 blocks free for /tmp, so instead
+ // we'll just assume that /tmp has enough space to hold the file.
+
+ // We still write the original source to cache, in case the MTD
+ // write is interrupted.
+ if (MakeFreeSpaceOnCache(source_file.size) < 0) {
+ printf("not enough free space on /cache\n");
+ return 1;
+ }
+ if (SaveFileContents(CACHE_TEMP_SOURCE, source_file) < 0) {
+ printf("failed to back up source file\n");
+ return 1;
+ }
+ made_copy = 1;
+ retry = 0;
+ } else {
+ int enough_space = 0;
+ if (retry > 0) {
+ size_t free_space = FreeSpaceForFile(target_fs);
+ int enough_space =
+ (free_space > (target_size * 3 / 2)); // 50% margin of error
+ printf("target %ld bytes; free space %ld bytes; retry %d; enough %d\n",
+ (long)target_size, (long)free_space, retry, enough_space);
+ }
+
+ if (!enough_space) {
+ retry = 0;
+ }
+
+ if (!enough_space && source_patch_filename != NULL) {
+ // Using the original source, but not enough free space. First
+ // copy the source file to cache, then delete it from the original
+ // location.
+
+ if (strncmp(source_filename, "MTD:", 4) == 0) {
+ // It's impossible to free space on the target filesystem by
+ // deleting the source if the source is an MTD partition. If
+ // we're ever in a state where we need to do this, fail.
+ printf("not enough free space for target but source is MTD\n");
+ return 1;
+ }
+
+ if (MakeFreeSpaceOnCache(source_file.size) < 0) {
+ printf("not enough free space on /cache\n");
+ return 1;
+ }
+
+ if (SaveFileContents(CACHE_TEMP_SOURCE, source_file) < 0) {
+ printf("failed to back up source file\n");
+ return 1;
+ }
+ made_copy = 1;
+ unlink(source_filename);
+
+ size_t free_space = FreeSpaceForFile(target_fs);
+ printf("(now %ld bytes free for target)\n", (long)free_space);
+ }
+ }
+
+ const char* patch_filename;
+ if (source_patch_filename != NULL) {
+ source_to_use = &source_file;
+ patch_filename = source_patch_filename;
+ } else {
+ source_to_use = &copy_file;
+ patch_filename = copy_patch_filename;
+ }
+
+ SinkFn sink = NULL;
+ void* token = NULL;
+ output = -1;
+ outname = NULL;
+ if (strncmp(target_filename, "MTD:", 4) == 0) {
+ // We store the decoded output in memory.
+ msi.buffer = malloc(target_size);
+ if (msi.buffer == NULL) {
+ printf("failed to alloc %ld bytes for output\n",
+ (long)target_size);
+ return 1;
+ }
+ msi.pos = 0;
+ msi.size = target_size;
+ sink = MemorySink;
+ token = &msi;
+ } else {
+ // We write the decoded output to "<tgt-file>.patch".
+ outname = (char*)malloc(strlen(target_filename) + 10);
+ strcpy(outname, target_filename);
+ strcat(outname, ".patch");
+
+ output = open(outname, O_WRONLY | O_CREAT | O_TRUNC);
+ if (output < 0) {
+ printf("failed to open output file %s: %s\n",
+ outname, strerror(errno));
+ return 1;
+ }
+ sink = FileSink;
+ token = &output;
+ }
+
+#define MAX_HEADER_LENGTH 8
+ unsigned char header[MAX_HEADER_LENGTH];
+ FILE* patchf = fopen(patch_filename, "rb");
+ if (patchf == NULL) {
+ printf("failed to open patch file %s: %s\n",
+ patch_filename, strerror(errno));
+ return 1;
+ }
+ int header_bytes_read = fread(header, 1, MAX_HEADER_LENGTH, patchf);
+ fclose(patchf);
+
+ SHA_init(&ctx);
+
+ int result;
+
+ if (header_bytes_read >= 4 &&
+ header[0] == 0xd6 && header[1] == 0xc3 &&
+ header[2] == 0xc4 && header[3] == 0) {
+ // xdelta3 patches begin "VCD" (with the high bits set) followed
+ // by a zero byte (the version number).
+ printf("error: xdelta3 patches no longer supported\n");
+ return 1;
+ } else if (header_bytes_read >= 8 &&
+ memcmp(header, "BSDIFF40", 8) == 0) {
+ result = ApplyBSDiffPatch(source_to_use->data, source_to_use->size,
+ patch_filename, 0, sink, token, &ctx);
+ } else if (header_bytes_read >= 8 &&
+ memcmp(header, "IMGDIFF", 7) == 0 &&
+ (header[7] == '1' || header[7] == '2')) {
+ result = ApplyImagePatch(source_to_use->data, source_to_use->size,
+ patch_filename, sink, token, &ctx);
+ } else {
+ printf("Unknown patch file format\n");
+ return 1;
+ }
+
+ if (output >= 0) {
+ fsync(output);
+ close(output);
+ }
+
+ if (result != 0) {
+ if (retry == 0) {
+ printf("applying patch failed\n");
+ return result != 0;
+ } else {
+ printf("applying patch failed; retrying\n");
+ }
+ if (outname != NULL) {
+ unlink(outname);
+ }
+ } else {
+ // succeeded; no need to retry
+ break;
+ }
+ } while (retry-- > 0);
+
+ const uint8_t* current_target_sha1 = SHA_final(&ctx);
+ if (memcmp(current_target_sha1, target_sha1, SHA_DIGEST_SIZE) != 0) {
+ printf("patch did not produce expected sha1\n");
+ return 1;
+ }
+
+ if (output < 0) {
+ // Copy the temp file to the MTD partition.
+ if (WriteToMTDPartition(msi.buffer, msi.pos, target_filename) != 0) {
+ printf("write of patched data to %s failed\n", target_filename);
+ return 1;
+ }
+ free(msi.buffer);
+ } else {
+ // Give the .patch file the same owner, group, and mode of the
+ // original source file.
+ if (chmod(outname, source_to_use->st.st_mode) != 0) {
+ printf("chmod of \"%s\" failed: %s\n", outname, strerror(errno));
+ return 1;
+ }
+ if (chown(outname, source_to_use->st.st_uid,
+ source_to_use->st.st_gid) != 0) {
+ printf("chown of \"%s\" failed: %s\n", outname, strerror(errno));
+ return 1;
+ }
+
+ // Finally, rename the .patch file to replace the target file.
+ if (rename(outname, target_filename) != 0) {
+ printf("rename of .patch to \"%s\" failed: %s\n",
+ target_filename, strerror(errno));
+ return 1;
+ }
+ }
+
+ // If this run of applypatch created the copy, and we're here, we
+ // can delete it.
+ if (made_copy) unlink(CACHE_TEMP_SOURCE);
+
+ // Success!
+ return 0;
+}
diff --git a/applypatch/applypatch.h b/applypatch/applypatch.h
new file mode 100644
index 000000000..3cb802165
--- /dev/null
+++ b/applypatch/applypatch.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef _APPLYPATCH_H
+#define _APPLYPATCH_H
+
+#include <sys/stat.h>
+#include "mincrypt/sha.h"
+
+typedef struct _Patch {
+ uint8_t sha1[SHA_DIGEST_SIZE];
+ const char* patch_filename;
+} Patch;
+
+typedef struct _FileContents {
+ uint8_t sha1[SHA_DIGEST_SIZE];
+ unsigned char* data;
+ ssize_t size;
+ struct stat st;
+} FileContents;
+
+// When there isn't enough room on the target filesystem to hold the
+// patched version of the file, we copy the original here and delete
+// it to free up space. If the expected source file doesn't exist, or
+// is corrupted, we look to see if this file contains the bits we want
+// and use it as the source instead.
+#define CACHE_TEMP_SOURCE "/cache/saved.file"
+
+typedef ssize_t (*SinkFn)(unsigned char*, ssize_t, void*);
+
+// applypatch.c
+size_t FreeSpaceForFile(const char* filename);
+int applypatch(int argc, char** argv);
+
+// Read a file into memory; store it and its associated metadata in
+// *file. Return 0 on success.
+int LoadFileContents(const char* filename, FileContents* file);
+void FreeFileContents(FileContents* file);
+
+// bsdiff.c
+void ShowBSDiffLicense();
+int ApplyBSDiffPatch(const unsigned char* old_data, ssize_t old_size,
+ const char* patch_filename, ssize_t offset,
+ SinkFn sink, void* token, SHA_CTX* ctx);
+int ApplyBSDiffPatchMem(const unsigned char* old_data, ssize_t old_size,
+ const char* patch_filename, ssize_t patch_offset,
+ unsigned char** new_data, ssize_t* new_size);
+
+// imgpatch.c
+int ApplyImagePatch(const unsigned char* old_data, ssize_t old_size,
+ const char* patch_filename,
+ SinkFn sink, void* token, SHA_CTX* ctx);
+
+// freecache.c
+int MakeFreeSpaceOnCache(size_t bytes_needed);
+
+#endif
diff --git a/applypatch/applypatch.sh b/applypatch/applypatch.sh
new file mode 100755
index 000000000..88f3025ff
--- /dev/null
+++ b/applypatch/applypatch.sh
@@ -0,0 +1,345 @@
+#!/bin/bash
+#
+# A test suite for applypatch. Run in a client where you have done
+# envsetup, choosecombo, etc.
+#
+# DO NOT RUN THIS ON A DEVICE YOU CARE ABOUT. It will mess up your
+# system partition.
+#
+#
+# TODO: find some way to get this run regularly along with the rest of
+# the tests.
+
+EMULATOR_PORT=5580
+DATA_DIR=$ANDROID_BUILD_TOP/build/tools/applypatch/testdata
+
+# This must be the filename that applypatch uses for its copies.
+CACHE_TEMP_SOURCE=/cache/saved.file
+
+# Put all binaries and files here. We use /cache because it's a
+# temporary filesystem in the emulator; it's created fresh each time
+# the emulator starts.
+WORK_DIR=/system
+
+# partition that WORK_DIR is located on, without the leading slash
+WORK_FS=system
+
+# set to 0 to use a device instead
+USE_EMULATOR=1
+
+# ------------------------
+
+tmpdir=$(mktemp -d)
+
+if [ "$USE_EMULATOR" == 1 ]; then
+ emulator -wipe-data -noaudio -no-window -port $EMULATOR_PORT &
+ pid_emulator=$!
+ ADB="adb -s emulator-$EMULATOR_PORT "
+else
+ ADB="adb -d "
+fi
+
+echo "waiting to connect to device"
+$ADB wait-for-device
+echo "device is available"
+$ADB remount
+# free up enough space on the system partition for the test to run.
+$ADB shell rm -r /system/media
+
+# run a command on the device; exit with the exit status of the device
+# command.
+run_command() {
+ $ADB shell "$@" \; echo \$? | awk '{if (b) {print a}; a=$0; b=1} END {exit a}'
+}
+
+testname() {
+ echo
+ echo "$1"...
+ testname="$1"
+}
+
+fail() {
+ echo
+ echo FAIL: $testname
+ echo
+ [ "$open_pid" == "" ] || kill $open_pid
+ [ "$pid_emulator" == "" ] || kill $pid_emulator
+ exit 1
+}
+
+sha1() {
+ sha1sum $1 | awk '{print $1}'
+}
+
+free_space() {
+ run_command df | awk "/$1/ {print gensub(/K/, \"\", \"g\", \$6)}"
+}
+
+cleanup() {
+ # not necessary if we're about to kill the emulator, but nice for
+ # running on real devices or already-running emulators.
+ testname "removing test files"
+ run_command rm $WORK_DIR/bloat.dat
+ run_command rm $WORK_DIR/old.file
+ run_command rm $WORK_DIR/patch.bsdiff
+ run_command rm $WORK_DIR/applypatch
+ run_command rm $CACHE_TEMP_SOURCE
+ run_command rm /cache/bloat*.dat
+
+ [ "$pid_emulator" == "" ] || kill $pid_emulator
+
+ rm -rf $tmpdir
+}
+
+cleanup
+
+$ADB push $ANDROID_PRODUCT_OUT/system/bin/applypatch $WORK_DIR/applypatch
+
+BAD1_SHA1=$(printf "%040x" $RANDOM)
+BAD2_SHA1=$(printf "%040x" $RANDOM)
+OLD_SHA1=$(sha1 $DATA_DIR/old.file)
+NEW_SHA1=$(sha1 $DATA_DIR/new.file)
+NEW_SIZE=$(stat -c %s $DATA_DIR/new.file)
+
+# --------------- basic execution ----------------------
+
+testname "usage message"
+run_command $WORK_DIR/applypatch && fail
+
+testname "display license"
+run_command $WORK_DIR/applypatch -l | grep -q -i copyright || fail
+
+
+# --------------- check mode ----------------------
+
+$ADB push $DATA_DIR/old.file $WORK_DIR
+
+testname "check mode single"
+run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $OLD_SHA1 || fail
+
+testname "check mode multiple"
+run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $BAD1_SHA1 $OLD_SHA1 $BAD2_SHA1|| fail
+
+testname "check mode failure"
+run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $BAD2_SHA1 $BAD1_SHA1 && fail
+
+$ADB push $DATA_DIR/old.file $CACHE_TEMP_SOURCE
+# put some junk in the old file
+run_command dd if=/dev/urandom of=$WORK_DIR/old.file count=100 bs=1024 || fail
+
+testname "check mode cache (corrupted) single"
+run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $OLD_SHA1 || fail
+
+testname "check mode cache (corrupted) multiple"
+run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $BAD1_SHA1 $OLD_SHA1 $BAD2_SHA1|| fail
+
+testname "check mode cache (corrupted) failure"
+run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $BAD2_SHA1 $BAD1_SHA1 && fail
+
+# remove the old file entirely
+run_command rm $WORK_DIR/old.file
+
+testname "check mode cache (missing) single"
+run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $OLD_SHA1 || fail
+
+testname "check mode cache (missing) multiple"
+run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $BAD1_SHA1 $OLD_SHA1 $BAD2_SHA1|| fail
+
+testname "check mode cache (missing) failure"
+run_command $WORK_DIR/applypatch -c $WORK_DIR/old.file $BAD2_SHA1 $BAD1_SHA1 && fail
+
+
+# --------------- apply patch ----------------------
+
+$ADB push $DATA_DIR/old.file $WORK_DIR
+$ADB push $DATA_DIR/patch.bsdiff $WORK_DIR
+
+# Check that the partition has enough space to apply the patch without
+# copying. If it doesn't, we'll be testing the low-space condition
+# when we intend to test the not-low-space condition.
+testname "apply patches (with enough space)"
+free_kb=$(free_space $WORK_FS)
+echo "${free_kb}kb free on /$WORK_FS."
+if (( free_kb * 1024 < NEW_SIZE * 3 / 2 )); then
+ echo "Not enough space on /$WORK_FS to patch test file."
+ echo
+ echo "This doesn't mean that applypatch is necessarily broken;"
+ echo "just that /$WORK_FS doesn't have enough free space to"
+ echo "properly run this test."
+ exit 1
+fi
+
+testname "apply bsdiff patch"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+$ADB pull $WORK_DIR/old.file $tmpdir/patched
+diff -q $DATA_DIR/new.file $tmpdir/patched || fail
+
+testname "reapply bsdiff patch"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+$ADB pull $WORK_DIR/old.file $tmpdir/patched
+diff -q $DATA_DIR/new.file $tmpdir/patched || fail
+
+
+# --------------- apply patch in new location ----------------------
+
+$ADB push $DATA_DIR/old.file $WORK_DIR
+$ADB push $DATA_DIR/patch.bsdiff $WORK_DIR
+
+# Check that the partition has enough space to apply the patch without
+# copying. If it doesn't, we'll be testing the low-space condition
+# when we intend to test the not-low-space condition.
+testname "apply patch to new location (with enough space)"
+free_kb=$(free_space $WORK_FS)
+echo "${free_kb}kb free on /$WORK_FS."
+if (( free_kb * 1024 < NEW_SIZE * 3 / 2 )); then
+ echo "Not enough space on /$WORK_FS to patch test file."
+ echo
+ echo "This doesn't mean that applypatch is necessarily broken;"
+ echo "just that /$WORK_FS doesn't have enough free space to"
+ echo "properly run this test."
+ exit 1
+fi
+
+run_command rm $WORK_DIR/new.file
+run_command rm $CACHE_TEMP_SOURCE
+
+testname "apply bsdiff patch to new location"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file $WORK_DIR/new.file $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+$ADB pull $WORK_DIR/new.file $tmpdir/patched
+diff -q $DATA_DIR/new.file $tmpdir/patched || fail
+
+testname "reapply bsdiff patch to new location"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file $WORK_DIR/new.file $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+$ADB pull $WORK_DIR/new.file $tmpdir/patched
+diff -q $DATA_DIR/new.file $tmpdir/patched || fail
+
+$ADB push $DATA_DIR/old.file $CACHE_TEMP_SOURCE
+# put some junk in the old file
+run_command dd if=/dev/urandom of=$WORK_DIR/old.file count=100 bs=1024 || fail
+
+testname "apply bsdiff patch to new location with corrupted source"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file $WORK_DIR/new.file $NEW_SHA1 $NEW_SIZE $OLD_SHA1:$WORK_DIR/patch.bsdiff $BAD1_SHA1:$WORK_DIR/foo || fail
+$ADB pull $WORK_DIR/new.file $tmpdir/patched
+diff -q $DATA_DIR/new.file $tmpdir/patched || fail
+
+# put some junk in the cache copy, too
+run_command dd if=/dev/urandom of=$CACHE_TEMP_SOURCE count=100 bs=1024 || fail
+
+run_command rm $WORK_DIR/new.file
+testname "apply bsdiff patch to new location with corrupted source and copy (no new file)"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file $WORK_DIR/new.file $NEW_SHA1 $NEW_SIZE $OLD_SHA1:$WORK_DIR/patch.bsdiff $BAD1_SHA1:$WORK_DIR/foo && fail
+
+# put some junk in the new file
+run_command dd if=/dev/urandom of=$WORK_DIR/new.file count=100 bs=1024 || fail
+
+testname "apply bsdiff patch to new location with corrupted source and copy (bad new file)"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file $WORK_DIR/new.file $NEW_SHA1 $NEW_SIZE $OLD_SHA1:$WORK_DIR/patch.bsdiff $BAD1_SHA1:$WORK_DIR/foo && fail
+
+# --------------- apply patch with low space on /system ----------------------
+
+$ADB push $DATA_DIR/old.file $WORK_DIR
+$ADB push $DATA_DIR/patch.bsdiff $WORK_DIR
+
+free_kb=$(free_space $WORK_FS)
+echo "${free_kb}kb free on /$WORK_FS; we'll soon fix that."
+echo run_command dd if=/dev/zero of=$WORK_DIR/bloat.dat count=$((free_kb-512)) bs=1024 || fail
+run_command dd if=/dev/zero of=$WORK_DIR/bloat.dat count=$((free_kb-512)) bs=1024 || fail
+free_kb=$(free_space $WORK_FS)
+echo "${free_kb}kb free on /$WORK_FS now."
+
+testname "apply bsdiff patch with low space"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+$ADB pull $WORK_DIR/old.file $tmpdir/patched
+diff -q $DATA_DIR/new.file $tmpdir/patched || fail
+
+testname "reapply bsdiff patch with low space"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+$ADB pull $WORK_DIR/old.file $tmpdir/patched
+diff -q $DATA_DIR/new.file $tmpdir/patched || fail
+
+# --------------- apply patch with low space on /system and /cache ----------------------
+
+$ADB push $DATA_DIR/old.file $WORK_DIR
+$ADB push $DATA_DIR/patch.bsdiff $WORK_DIR
+
+free_kb=$(free_space $WORK_FS)
+echo "${free_kb}kb free on /$WORK_FS"
+
+run_command mkdir /cache/subdir
+run_command 'echo > /cache/subdir/a.file'
+run_command 'echo > /cache/a.file'
+run_command mkdir /cache/recovery /cache/recovery/otatest
+run_command 'echo > /cache/recovery/otatest/b.file'
+run_command "echo > $CACHE_TEMP_SOURCE"
+free_kb=$(free_space cache)
+echo "${free_kb}kb free on /cache; we'll soon fix that."
+run_command dd if=/dev/zero of=/cache/bloat_small.dat count=128 bs=1024 || fail
+run_command dd if=/dev/zero of=/cache/bloat_large.dat count=$((free_kb-640)) bs=1024 || fail
+free_kb=$(free_space cache)
+echo "${free_kb}kb free on /cache now."
+
+testname "apply bsdiff patch with low space, full cache, can't delete enough"
+$ADB shell 'cat >> /cache/bloat_large.dat' & open_pid=$!
+echo "open_pid is $open_pid"
+
+# size check should fail even though it deletes some stuff
+run_command $WORK_DIR/applypatch -s $NEW_SIZE && fail
+run_command ls /cache/bloat_small.dat && fail # was deleted
+run_command ls /cache/a.file && fail # was deleted
+run_command ls /cache/recovery/otatest/b.file && fail # was deleted
+run_command ls /cache/bloat_large.dat || fail # wasn't deleted because it was open
+run_command ls /cache/subdir/a.file || fail # wasn't deleted because it's in a subdir
+run_command ls $CACHE_TEMP_SOURCE || fail # wasn't deleted because it's the source file copy
+
+# should fail; not enough files can be deleted
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff && fail
+run_command ls /cache/bloat_large.dat || fail # wasn't deleted because it was open
+run_command ls /cache/subdir/a.file || fail # wasn't deleted because it's in a subdir
+run_command ls $CACHE_TEMP_SOURCE || fail # wasn't deleted because it's the source file copy
+
+kill $open_pid # /cache/bloat_large.dat is no longer open
+
+testname "apply bsdiff patch with low space, full cache, can delete enough"
+
+# should succeed after deleting /cache/bloat_large.dat
+run_command $WORK_DIR/applypatch -s $NEW_SIZE || fail
+run_command ls /cache/bloat_large.dat && fail # was deleted
+run_command ls /cache/subdir/a.file || fail # still wasn't deleted because it's in a subdir
+run_command ls $CACHE_TEMP_SOURCE || fail # wasn't deleted because it's the source file copy
+
+# should succeed
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+$ADB pull $WORK_DIR/old.file $tmpdir/patched
+diff -q $DATA_DIR/new.file $tmpdir/patched || fail
+run_command ls /cache/subdir/a.file || fail # still wasn't deleted because it's in a subdir
+run_command ls $CACHE_TEMP_SOURCE && fail # was deleted because patching overwrote it, then deleted it
+
+# --------------- apply patch from cache ----------------------
+
+$ADB push $DATA_DIR/old.file $CACHE_TEMP_SOURCE
+# put some junk in the old file
+run_command dd if=/dev/urandom of=$WORK_DIR/old.file count=100 bs=1024 || fail
+
+testname "apply bsdiff patch from cache (corrupted source) with low space"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+$ADB pull $WORK_DIR/old.file $tmpdir/patched
+diff -q $DATA_DIR/new.file $tmpdir/patched || fail
+
+$ADB push $DATA_DIR/old.file $CACHE_TEMP_SOURCE
+# remove the old file entirely
+run_command rm $WORK_DIR/old.file
+
+testname "apply bsdiff patch from cache (missing source) with low space"
+run_command $WORK_DIR/applypatch $WORK_DIR/old.file - $NEW_SHA1 $NEW_SIZE $BAD1_SHA1:$WORK_DIR/foo $OLD_SHA1:$WORK_DIR/patch.bsdiff || fail
+$ADB pull $WORK_DIR/old.file $tmpdir/patched
+diff -q $DATA_DIR/new.file $tmpdir/patched || fail
+
+
+# --------------- cleanup ----------------------
+
+cleanup
+
+echo
+echo PASS
+echo
+
diff --git a/applypatch/bsdiff.c b/applypatch/bsdiff.c
new file mode 100644
index 000000000..b6d342b7a
--- /dev/null
+++ b/applypatch/bsdiff.c
@@ -0,0 +1,410 @@
+/*
+ * Copyright (C) 2009 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Most of this code comes from bsdiff.c from the bsdiff-4.3
+ * distribution, which is:
+ */
+
+/*-
+ * Copyright 2003-2005 Colin Percival
+ * All rights reserved
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted providing that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/types.h>
+
+#include <bzlib.h>
+#include <err.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#define MIN(x,y) (((x)<(y)) ? (x) : (y))
+
+static void split(off_t *I,off_t *V,off_t start,off_t len,off_t h)
+{
+ off_t i,j,k,x,tmp,jj,kk;
+
+ if(len<16) {
+ for(k=start;k<start+len;k+=j) {
+ j=1;x=V[I[k]+h];
+ for(i=1;k+i<start+len;i++) {
+ if(V[I[k+i]+h]<x) {
+ x=V[I[k+i]+h];
+ j=0;
+ };
+ if(V[I[k+i]+h]==x) {
+ tmp=I[k+j];I[k+j]=I[k+i];I[k+i]=tmp;
+ j++;
+ };
+ };
+ for(i=0;i<j;i++) V[I[k+i]]=k+j-1;
+ if(j==1) I[k]=-1;
+ };
+ return;
+ };
+
+ x=V[I[start+len/2]+h];
+ jj=0;kk=0;
+ for(i=start;i<start+len;i++) {
+ if(V[I[i]+h]<x) jj++;
+ if(V[I[i]+h]==x) kk++;
+ };
+ jj+=start;kk+=jj;
+
+ i=start;j=0;k=0;
+ while(i<jj) {
+ if(V[I[i]+h]<x) {
+ i++;
+ } else if(V[I[i]+h]==x) {
+ tmp=I[i];I[i]=I[jj+j];I[jj+j]=tmp;
+ j++;
+ } else {
+ tmp=I[i];I[i]=I[kk+k];I[kk+k]=tmp;
+ k++;
+ };
+ };
+
+ while(jj+j<kk) {
+ if(V[I[jj+j]+h]==x) {
+ j++;
+ } else {
+ tmp=I[jj+j];I[jj+j]=I[kk+k];I[kk+k]=tmp;
+ k++;
+ };
+ };
+
+ if(jj>start) split(I,V,start,jj-start,h);
+
+ for(i=0;i<kk-jj;i++) V[I[jj+i]]=kk-1;
+ if(jj==kk-1) I[jj]=-1;
+
+ if(start+len>kk) split(I,V,kk,start+len-kk,h);
+}
+
+static void qsufsort(off_t *I,off_t *V,u_char *old,off_t oldsize)
+{
+ off_t buckets[256];
+ off_t i,h,len;
+
+ for(i=0;i<256;i++) buckets[i]=0;
+ for(i=0;i<oldsize;i++) buckets[old[i]]++;
+ for(i=1;i<256;i++) buckets[i]+=buckets[i-1];
+ for(i=255;i>0;i--) buckets[i]=buckets[i-1];
+ buckets[0]=0;
+
+ for(i=0;i<oldsize;i++) I[++buckets[old[i]]]=i;
+ I[0]=oldsize;
+ for(i=0;i<oldsize;i++) V[i]=buckets[old[i]];
+ V[oldsize]=0;
+ for(i=1;i<256;i++) if(buckets[i]==buckets[i-1]+1) I[buckets[i]]=-1;
+ I[0]=-1;
+
+ for(h=1;I[0]!=-(oldsize+1);h+=h) {
+ len=0;
+ for(i=0;i<oldsize+1;) {
+ if(I[i]<0) {
+ len-=I[i];
+ i-=I[i];
+ } else {
+ if(len) I[i-len]=-len;
+ len=V[I[i]]+1-i;
+ split(I,V,i,len,h);
+ i+=len;
+ len=0;
+ };
+ };
+ if(len) I[i-len]=-len;
+ };
+
+ for(i=0;i<oldsize+1;i++) I[V[i]]=i;
+}
+
+static off_t matchlen(u_char *old,off_t oldsize,u_char *new,off_t newsize)
+{
+ off_t i;
+
+ for(i=0;(i<oldsize)&&(i<newsize);i++)
+ if(old[i]!=new[i]) break;
+
+ return i;
+}
+
+static off_t search(off_t *I,u_char *old,off_t oldsize,
+ u_char *new,off_t newsize,off_t st,off_t en,off_t *pos)
+{
+ off_t x,y;
+
+ if(en-st<2) {
+ x=matchlen(old+I[st],oldsize-I[st],new,newsize);
+ y=matchlen(old+I[en],oldsize-I[en],new,newsize);
+
+ if(x>y) {
+ *pos=I[st];
+ return x;
+ } else {
+ *pos=I[en];
+ return y;
+ }
+ };
+
+ x=st+(en-st)/2;
+ if(memcmp(old+I[x],new,MIN(oldsize-I[x],newsize))<0) {
+ return search(I,old,oldsize,new,newsize,x,en,pos);
+ } else {
+ return search(I,old,oldsize,new,newsize,st,x,pos);
+ };
+}
+
+static void offtout(off_t x,u_char *buf)
+{
+ off_t y;
+
+ if(x<0) y=-x; else y=x;
+
+ buf[0]=y%256;y-=buf[0];
+ y=y/256;buf[1]=y%256;y-=buf[1];
+ y=y/256;buf[2]=y%256;y-=buf[2];
+ y=y/256;buf[3]=y%256;y-=buf[3];
+ y=y/256;buf[4]=y%256;y-=buf[4];
+ y=y/256;buf[5]=y%256;y-=buf[5];
+ y=y/256;buf[6]=y%256;y-=buf[6];
+ y=y/256;buf[7]=y%256;
+
+ if(x<0) buf[7]|=0x80;
+}
+
+// This is main() from bsdiff.c, with the following changes:
+//
+// - old, oldsize, new, newsize are arguments; we don't load this
+// data from files. old and new are owned by the caller; we
+// don't free them at the end.
+//
+// - the "I" block of memory is owned by the caller, who passes a
+// pointer to *I, which can be NULL. This way if we call
+// bsdiff() multiple times with the same 'old' data, we only do
+// the qsufsort() step the first time.
+//
+int bsdiff(u_char* old, off_t oldsize, off_t** IP, u_char* new, off_t newsize,
+ const char* patch_filename)
+{
+ int fd;
+ off_t *I;
+ off_t scan,pos,len;
+ off_t lastscan,lastpos,lastoffset;
+ off_t oldscore,scsc;
+ off_t s,Sf,lenf,Sb,lenb;
+ off_t overlap,Ss,lens;
+ off_t i;
+ off_t dblen,eblen;
+ u_char *db,*eb;
+ u_char buf[8];
+ u_char header[32];
+ FILE * pf;
+ BZFILE * pfbz2;
+ int bz2err;
+
+ if (*IP == NULL) {
+ off_t* V;
+ *IP = malloc((oldsize+1) * sizeof(off_t));
+ V = malloc((oldsize+1) * sizeof(off_t));
+ qsufsort(*IP, V, old, oldsize);
+ free(V);
+ }
+ I = *IP;
+
+ if(((db=malloc(newsize+1))==NULL) ||
+ ((eb=malloc(newsize+1))==NULL)) err(1,NULL);
+ dblen=0;
+ eblen=0;
+
+ /* Create the patch file */
+ if ((pf = fopen(patch_filename, "w")) == NULL)
+ err(1, "%s", patch_filename);
+
+ /* Header is
+ 0 8 "BSDIFF40"
+ 8 8 length of bzip2ed ctrl block
+ 16 8 length of bzip2ed diff block
+ 24 8 length of new file */
+ /* File is
+ 0 32 Header
+ 32 ?? Bzip2ed ctrl block
+ ?? ?? Bzip2ed diff block
+ ?? ?? Bzip2ed extra block */
+ memcpy(header,"BSDIFF40",8);
+ offtout(0, header + 8);
+ offtout(0, header + 16);
+ offtout(newsize, header + 24);
+ if (fwrite(header, 32, 1, pf) != 1)
+ err(1, "fwrite(%s)", patch_filename);
+
+ /* Compute the differences, writing ctrl as we go */
+ if ((pfbz2 = BZ2_bzWriteOpen(&bz2err, pf, 9, 0, 0)) == NULL)
+ errx(1, "BZ2_bzWriteOpen, bz2err = %d", bz2err);
+ scan=0;len=0;
+ lastscan=0;lastpos=0;lastoffset=0;
+ while(scan<newsize) {
+ oldscore=0;
+
+ for(scsc=scan+=len;scan<newsize;scan++) {
+ len=search(I,old,oldsize,new+scan,newsize-scan,
+ 0,oldsize,&pos);
+
+ for(;scsc<scan+len;scsc++)
+ if((scsc+lastoffset<oldsize) &&
+ (old[scsc+lastoffset] == new[scsc]))
+ oldscore++;
+
+ if(((len==oldscore) && (len!=0)) ||
+ (len>oldscore+8)) break;
+
+ if((scan+lastoffset<oldsize) &&
+ (old[scan+lastoffset] == new[scan]))
+ oldscore--;
+ };
+
+ if((len!=oldscore) || (scan==newsize)) {
+ s=0;Sf=0;lenf=0;
+ for(i=0;(lastscan+i<scan)&&(lastpos+i<oldsize);) {
+ if(old[lastpos+i]==new[lastscan+i]) s++;
+ i++;
+ if(s*2-i>Sf*2-lenf) { Sf=s; lenf=i; };
+ };
+
+ lenb=0;
+ if(scan<newsize) {
+ s=0;Sb=0;
+ for(i=1;(scan>=lastscan+i)&&(pos>=i);i++) {
+ if(old[pos-i]==new[scan-i]) s++;
+ if(s*2-i>Sb*2-lenb) { Sb=s; lenb=i; };
+ };
+ };
+
+ if(lastscan+lenf>scan-lenb) {
+ overlap=(lastscan+lenf)-(scan-lenb);
+ s=0;Ss=0;lens=0;
+ for(i=0;i<overlap;i++) {
+ if(new[lastscan+lenf-overlap+i]==
+ old[lastpos+lenf-overlap+i]) s++;
+ if(new[scan-lenb+i]==
+ old[pos-lenb+i]) s--;
+ if(s>Ss) { Ss=s; lens=i+1; };
+ };
+
+ lenf+=lens-overlap;
+ lenb-=lens;
+ };
+
+ for(i=0;i<lenf;i++)
+ db[dblen+i]=new[lastscan+i]-old[lastpos+i];
+ for(i=0;i<(scan-lenb)-(lastscan+lenf);i++)
+ eb[eblen+i]=new[lastscan+lenf+i];
+
+ dblen+=lenf;
+ eblen+=(scan-lenb)-(lastscan+lenf);
+
+ offtout(lenf,buf);
+ BZ2_bzWrite(&bz2err, pfbz2, buf, 8);
+ if (bz2err != BZ_OK)
+ errx(1, "BZ2_bzWrite, bz2err = %d", bz2err);
+
+ offtout((scan-lenb)-(lastscan+lenf),buf);
+ BZ2_bzWrite(&bz2err, pfbz2, buf, 8);
+ if (bz2err != BZ_OK)
+ errx(1, "BZ2_bzWrite, bz2err = %d", bz2err);
+
+ offtout((pos-lenb)-(lastpos+lenf),buf);
+ BZ2_bzWrite(&bz2err, pfbz2, buf, 8);
+ if (bz2err != BZ_OK)
+ errx(1, "BZ2_bzWrite, bz2err = %d", bz2err);
+
+ lastscan=scan-lenb;
+ lastpos=pos-lenb;
+ lastoffset=pos-scan;
+ };
+ };
+ BZ2_bzWriteClose(&bz2err, pfbz2, 0, NULL, NULL);
+ if (bz2err != BZ_OK)
+ errx(1, "BZ2_bzWriteClose, bz2err = %d", bz2err);
+
+ /* Compute size of compressed ctrl data */
+ if ((len = ftello(pf)) == -1)
+ err(1, "ftello");
+ offtout(len-32, header + 8);
+
+ /* Write compressed diff data */
+ if ((pfbz2 = BZ2_bzWriteOpen(&bz2err, pf, 9, 0, 0)) == NULL)
+ errx(1, "BZ2_bzWriteOpen, bz2err = %d", bz2err);
+ BZ2_bzWrite(&bz2err, pfbz2, db, dblen);
+ if (bz2err != BZ_OK)
+ errx(1, "BZ2_bzWrite, bz2err = %d", bz2err);
+ BZ2_bzWriteClose(&bz2err, pfbz2, 0, NULL, NULL);
+ if (bz2err != BZ_OK)
+ errx(1, "BZ2_bzWriteClose, bz2err = %d", bz2err);
+
+ /* Compute size of compressed diff data */
+ if ((newsize = ftello(pf)) == -1)
+ err(1, "ftello");
+ offtout(newsize - len, header + 16);
+
+ /* Write compressed extra data */
+ if ((pfbz2 = BZ2_bzWriteOpen(&bz2err, pf, 9, 0, 0)) == NULL)
+ errx(1, "BZ2_bzWriteOpen, bz2err = %d", bz2err);
+ BZ2_bzWrite(&bz2err, pfbz2, eb, eblen);
+ if (bz2err != BZ_OK)
+ errx(1, "BZ2_bzWrite, bz2err = %d", bz2err);
+ BZ2_bzWriteClose(&bz2err, pfbz2, 0, NULL, NULL);
+ if (bz2err != BZ_OK)
+ errx(1, "BZ2_bzWriteClose, bz2err = %d", bz2err);
+
+ /* Seek to the beginning, write the header, and close the file */
+ if (fseeko(pf, 0, SEEK_SET))
+ err(1, "fseeko");
+ if (fwrite(header, 32, 1, pf) != 1)
+ err(1, "fwrite(%s)", patch_filename);
+ if (fclose(pf))
+ err(1, "fclose");
+
+ /* Free the memory we used */
+ free(db);
+ free(eb);
+
+ return 0;
+}
diff --git a/applypatch/bspatch.c b/applypatch/bspatch.c
new file mode 100644
index 000000000..d5cd6174d
--- /dev/null
+++ b/applypatch/bspatch.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+// This file is a nearly line-for-line copy of bspatch.c from the
+// bsdiff-4.3 distribution; the primary differences being how the
+// input and output data are read and the error handling. Running
+// applypatch with the -l option will display the bsdiff license
+// notice.
+
+#include <stdio.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include <unistd.h>
+#include <string.h>
+
+#include <bzlib.h>
+
+#include "mincrypt/sha.h"
+#include "applypatch.h"
+
+void ShowBSDiffLicense() {
+ puts("The bsdiff library used herein is:\n"
+ "\n"
+ "Copyright 2003-2005 Colin Percival\n"
+ "All rights reserved\n"
+ "\n"
+ "Redistribution and use in source and binary forms, with or without\n"
+ "modification, are permitted providing that the following conditions\n"
+ "are met:\n"
+ "1. Redistributions of source code must retain the above copyright\n"
+ " notice, this list of conditions and the following disclaimer.\n"
+ "2. Redistributions in binary form must reproduce the above copyright\n"
+ " notice, this list of conditions and the following disclaimer in the\n"
+ " documentation and/or other materials provided with the distribution.\n"
+ "\n"
+ "THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR\n"
+ "IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED\n"
+ "WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE\n"
+ "ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY\n"
+ "DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL\n"
+ "DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS\n"
+ "OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)\n"
+ "HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,\n"
+ "STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING\n"
+ "IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE\n"
+ "POSSIBILITY OF SUCH DAMAGE.\n"
+ "\n------------------\n\n"
+ "This program uses Julian R Seward's \"libbzip2\" library, available\n"
+ "from http://www.bzip.org/.\n"
+ );
+}
+
+static off_t offtin(u_char *buf)
+{
+ off_t y;
+
+ y=buf[7]&0x7F;
+ y=y*256;y+=buf[6];
+ y=y*256;y+=buf[5];
+ y=y*256;y+=buf[4];
+ y=y*256;y+=buf[3];
+ y=y*256;y+=buf[2];
+ y=y*256;y+=buf[1];
+ y=y*256;y+=buf[0];
+
+ if(buf[7]&0x80) y=-y;
+
+ return y;
+}
+
+
+int ApplyBSDiffPatch(const unsigned char* old_data, ssize_t old_size,
+ const char* patch_filename, ssize_t patch_offset,
+ SinkFn sink, void* token, SHA_CTX* ctx) {
+
+ unsigned char* new_data;
+ ssize_t new_size;
+ if (ApplyBSDiffPatchMem(old_data, old_size, patch_filename, patch_offset,
+ &new_data, &new_size) != 0) {
+ return -1;
+ }
+
+ if (sink(new_data, new_size, token) < new_size) {
+ fprintf(stderr, "short write of output: %d (%s)\n", errno, strerror(errno));
+ return 1;
+ }
+ if (ctx) {
+ SHA_update(ctx, new_data, new_size);
+ }
+ free(new_data);
+
+ return 0;
+}
+
+int ApplyBSDiffPatchMem(const unsigned char* old_data, ssize_t old_size,
+ const char* patch_filename, ssize_t patch_offset,
+ unsigned char** new_data, ssize_t* new_size) {
+
+ FILE* f;
+ if ((f = fopen(patch_filename, "rb")) == NULL) {
+ fprintf(stderr, "failed to open patch file\n");
+ return 1;
+ }
+
+ // File format:
+ // 0 8 "BSDIFF40"
+ // 8 8 X
+ // 16 8 Y
+ // 24 8 sizeof(newfile)
+ // 32 X bzip2(control block)
+ // 32+X Y bzip2(diff block)
+ // 32+X+Y ??? bzip2(extra block)
+ // with control block a set of triples (x,y,z) meaning "add x bytes
+ // from oldfile to x bytes from the diff block; copy y bytes from the
+ // extra block; seek forwards in oldfile by z bytes".
+
+ fseek(f, patch_offset, SEEK_SET);
+
+ unsigned char header[32];
+ if (fread(header, 1, 32, f) < 32) {
+ fprintf(stderr, "failed to read patch file header\n");
+ return 1;
+ }
+
+ if (memcmp(header, "BSDIFF40", 8) != 0) {
+ fprintf(stderr, "corrupt bsdiff patch file header (magic number)\n");
+ return 1;
+ }
+
+ ssize_t ctrl_len, data_len;
+ ctrl_len = offtin(header+8);
+ data_len = offtin(header+16);
+ *new_size = offtin(header+24);
+
+ if (ctrl_len < 0 || data_len < 0 || *new_size < 0) {
+ fprintf(stderr, "corrupt patch file header (data lengths)\n");
+ return 1;
+ }
+
+ fclose(f);
+
+ int bzerr;
+
+#define OPEN_AT(f, bzf, offset) \
+ FILE* f; \
+ BZFILE* bzf; \
+ if ((f = fopen(patch_filename, "rb")) == NULL) { \
+ fprintf(stderr, "failed to open patch file\n"); \
+ return 1; \
+ } \
+ if (fseeko(f, offset+patch_offset, SEEK_SET)) { \
+ fprintf(stderr, "failed to seek in patch file\n"); \
+ return 1; \
+ } \
+ if ((bzf = BZ2_bzReadOpen(&bzerr, f, 0, 0, NULL, 0)) == NULL) { \
+ fprintf(stderr, "failed to bzReadOpen in patch file (%d)\n", bzerr); \
+ return 1; \
+ }
+
+ OPEN_AT(cpf, cpfbz2, 32);
+ OPEN_AT(dpf, dpfbz2, 32+ctrl_len);
+ OPEN_AT(epf, epfbz2, 32+ctrl_len+data_len);
+
+#undef OPEN_AT
+
+ *new_data = malloc(*new_size);
+ if (*new_data == NULL) {
+ fprintf(stderr, "failed to allocate %d bytes of memory for output file\n",
+ (int)*new_size);
+ return 1;
+ }
+
+ off_t oldpos = 0, newpos = 0;
+ off_t ctrl[3];
+ off_t len_read;
+ int i;
+ unsigned char buf[8];
+ while (newpos < *new_size) {
+ // Read control data
+ for (i = 0; i < 3; ++i) {
+ len_read = BZ2_bzRead(&bzerr, cpfbz2, buf, 8);
+ if (len_read < 8 || !(bzerr == BZ_OK || bzerr == BZ_STREAM_END)) {
+ fprintf(stderr, "corrupt patch (read control)\n");
+ return 1;
+ }
+ ctrl[i] = offtin(buf);
+ }
+
+ // Sanity check
+ if (newpos + ctrl[0] > *new_size) {
+ fprintf(stderr, "corrupt patch (new file overrun)\n");
+ return 1;
+ }
+
+ // Read diff string
+ len_read = BZ2_bzRead(&bzerr, dpfbz2, *new_data + newpos, ctrl[0]);
+ if (len_read < ctrl[0] || !(bzerr == BZ_OK || bzerr == BZ_STREAM_END)) {
+ fprintf(stderr, "corrupt patch (read diff)\n");
+ return 1;
+ }
+
+ // Add old data to diff string
+ for (i = 0; i < ctrl[0]; ++i) {
+ if ((oldpos+i >= 0) && (oldpos+i < old_size)) {
+ (*new_data)[newpos+i] += old_data[oldpos+i];
+ }
+ }
+
+ // Adjust pointers
+ newpos += ctrl[0];
+ oldpos += ctrl[0];
+
+ // Sanity check
+ if (newpos + ctrl[1] > *new_size) {
+ fprintf(stderr, "corrupt patch (new file overrun)\n");
+ return 1;
+ }
+
+ // Read extra string
+ len_read = BZ2_bzRead(&bzerr, epfbz2, *new_data + newpos, ctrl[1]);
+ if (len_read < ctrl[1] || !(bzerr == BZ_OK || bzerr == BZ_STREAM_END)) {
+ fprintf(stderr, "corrupt patch (read extra)\n");
+ return 1;
+ }
+
+ // Adjust pointers
+ newpos += ctrl[1];
+ oldpos += ctrl[2];
+ }
+
+ BZ2_bzReadClose(&bzerr, cpfbz2);
+ BZ2_bzReadClose(&bzerr, dpfbz2);
+ BZ2_bzReadClose(&bzerr, epfbz2);
+ fclose(cpf);
+ fclose(dpf);
+ fclose(epf);
+
+ return 0;
+}
diff --git a/applypatch/freecache.c b/applypatch/freecache.c
new file mode 100644
index 000000000..9827fda06
--- /dev/null
+++ b/applypatch/freecache.c
@@ -0,0 +1,172 @@
+#include <errno.h>
+#include <libgen.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <sys/statfs.h>
+#include <unistd.h>
+#include <dirent.h>
+#include <ctype.h>
+
+#include "applypatch.h"
+
+static int EliminateOpenFiles(char** files, int file_count) {
+ DIR* d;
+ struct dirent* de;
+ d = opendir("/proc");
+ if (d == NULL) {
+ printf("error opening /proc: %s\n", strerror(errno));
+ return -1;
+ }
+ while ((de = readdir(d)) != 0) {
+ int i;
+ for (i = 0; de->d_name[i] != '\0' && isdigit(de->d_name[i]); ++i);
+ if (de->d_name[i]) continue;
+
+ // de->d_name[i] is numeric
+
+ char path[FILENAME_MAX];
+ strcpy(path, "/proc/");
+ strcat(path, de->d_name);
+ strcat(path, "/fd/");
+
+ DIR* fdd;
+ struct dirent* fdde;
+ fdd = opendir(path);
+ if (fdd == NULL) {
+ printf("error opening %s: %s\n", path, strerror(errno));
+ continue;
+ }
+ while ((fdde = readdir(fdd)) != 0) {
+ char fd_path[FILENAME_MAX];
+ char link[FILENAME_MAX];
+ strcpy(fd_path, path);
+ strcat(fd_path, fdde->d_name);
+
+ int count;
+ count = readlink(fd_path, link, sizeof(link)-1);
+ if (count >= 0) {
+ link[count] = '\0';
+
+ // This is inefficient, but it should only matter if there are
+ // lots of files in /cache, and lots of them are open (neither
+ // of which should be true, especially in recovery).
+ if (strncmp(link, "/cache/", 7) == 0) {
+ int j;
+ for (j = 0; j < file_count; ++j) {
+ if (files[j] && strcmp(files[j], link) == 0) {
+ printf("%s is open by %s\n", link, de->d_name);
+ free(files[j]);
+ files[j] = NULL;
+ }
+ }
+ }
+ }
+ }
+ closedir(fdd);
+ }
+ closedir(d);
+
+ return 0;
+}
+
+int FindExpendableFiles(char*** names, int* entries) {
+ DIR* d;
+ struct dirent* de;
+ int size = 32;
+ *entries = 0;
+ *names = malloc(size * sizeof(char*));
+
+ char path[FILENAME_MAX];
+
+ // We're allowed to delete unopened regular files in any of these
+ // directories.
+ const char* dirs[2] = {"/cache", "/cache/recovery/otatest"};
+
+ unsigned int i;
+ for (i = 0; i < sizeof(dirs)/sizeof(dirs[0]); ++i) {
+ d = opendir(dirs[i]);
+ if (d == NULL) {
+ printf("error opening %s: %s\n", dirs[i], strerror(errno));
+ continue;
+ }
+
+ // Look for regular files in the directory (not in any subdirectories).
+ while ((de = readdir(d)) != 0) {
+ strcpy(path, dirs[i]);
+ strcat(path, "/");
+ strcat(path, de->d_name);
+
+ // We can't delete CACHE_TEMP_SOURCE; if it's there we might have
+ // restarted during installation and could be depending on it to
+ // be there.
+ if (strcmp(path, CACHE_TEMP_SOURCE) == 0) continue;
+
+ struct stat st;
+ if (stat(path, &st) == 0 && S_ISREG(st.st_mode)) {
+ if (*entries >= size) {
+ size *= 2;
+ *names = realloc(*names, size * sizeof(char*));
+ }
+ (*names)[(*entries)++] = strdup(path);
+ }
+ }
+
+ closedir(d);
+ }
+
+ printf("%d regular files in deletable directories\n", *entries);
+
+ if (EliminateOpenFiles(*names, *entries) < 0) {
+ return -1;
+ }
+
+ return 0;
+}
+
+int MakeFreeSpaceOnCache(size_t bytes_needed) {
+ size_t free_now = FreeSpaceForFile("/cache");
+ printf("%ld bytes free on /cache (%ld needed)\n",
+ (long)free_now, (long)bytes_needed);
+
+ if (free_now >= bytes_needed) {
+ return 0;
+ }
+
+ char** names;
+ int entries;
+
+ if (FindExpendableFiles(&names, &entries) < 0) {
+ return -1;
+ }
+
+ if (entries == 0) {
+ // nothing we can delete to free up space!
+ printf("no files can be deleted to free space on /cache\n");
+ return -1;
+ }
+
+ // We could try to be smarter about which files to delete: the
+ // biggest ones? the smallest ones that will free up enough space?
+ // the oldest? the newest?
+ //
+ // Instead, we'll be dumb.
+
+ int i;
+ for (i = 0; i < entries && free_now < bytes_needed; ++i) {
+ if (names[i]) {
+ unlink(names[i]);
+ free_now = FreeSpaceForFile("/cache");
+ printf("deleted %s; now %ld bytes free\n", names[i], (long)free_now);
+ free(names[i]);
+ }
+ }
+
+ for (; i < entries; ++i) {
+ free(names[i]);
+ }
+ free(names);
+
+ return (free_now >= bytes_needed) ? 0 : -1;
+}
diff --git a/applypatch/imgdiff.c b/applypatch/imgdiff.c
new file mode 100644
index 000000000..6b9ebee5c
--- /dev/null
+++ b/applypatch/imgdiff.c
@@ -0,0 +1,1010 @@
+/*
+ * Copyright (C) 2009 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * This program constructs binary patches for images -- such as boot.img
+ * and recovery.img -- that consist primarily of large chunks of gzipped
+ * data interspersed with uncompressed data. Doing a naive bsdiff of
+ * these files is not useful because small changes in the data lead to
+ * large changes in the compressed bitstream; bsdiff patches of gzipped
+ * data are typically as large as the data itself.
+ *
+ * To patch these usefully, we break the source and target images up into
+ * chunks of two types: "normal" and "gzip". Normal chunks are simply
+ * patched using a plain bsdiff. Gzip chunks are first expanded, then a
+ * bsdiff is applied to the uncompressed data, then the patched data is
+ * gzipped using the same encoder parameters. Patched chunks are
+ * concatenated together to create the output file; the output image
+ * should be *exactly* the same series of bytes as the target image used
+ * originally to generate the patch.
+ *
+ * To work well with this tool, the gzipped sections of the target
+ * image must have been generated using the same deflate encoder that
+ * is available in applypatch, namely, the one in the zlib library.
+ * In practice this means that images should be compressed using the
+ * "minigzip" tool included in the zlib distribution, not the GNU gzip
+ * program.
+ *
+ * An "imgdiff" patch consists of a header describing the chunk structure
+ * of the file and any encoding parameters needed for the gzipped
+ * chunks, followed by N bsdiff patches, one per chunk.
+ *
+ * For a diff to be generated, the source and target images must have the
+ * same "chunk" structure: that is, the same number of gzipped and normal
+ * chunks in the same order. Android boot and recovery images currently
+ * consist of five chunks: a small normal header, a gzipped kernel, a
+ * small normal section, a gzipped ramdisk, and finally a small normal
+ * footer.
+ *
+ * Caveats: we locate gzipped sections within the source and target
+ * images by searching for the byte sequence 1f8b0800: 1f8b is the gzip
+ * magic number; 08 specifies the "deflate" encoding [the only encoding
+ * supported by the gzip standard]; and 00 is the flags byte. We do not
+ * currently support any extra header fields (which would be indicated by
+ * a nonzero flags byte). We also don't handle the case when that byte
+ * sequence appears spuriously in the file. (Note that it would have to
+ * occur spuriously within a normal chunk to be a problem.)
+ *
+ *
+ * The imgdiff patch header looks like this:
+ *
+ * "IMGDIFF1" (8) [magic number and version]
+ * chunk count (4)
+ * for each chunk:
+ * chunk type (4) [CHUNK_{NORMAL, GZIP, DEFLATE, RAW}]
+ * if chunk type == CHUNK_NORMAL:
+ * source start (8)
+ * source len (8)
+ * bsdiff patch offset (8) [from start of patch file]
+ * if chunk type == CHUNK_GZIP: (version 1 only)
+ * source start (8)
+ * source len (8)
+ * bsdiff patch offset (8) [from start of patch file]
+ * source expanded len (8) [size of uncompressed source]
+ * target expected len (8) [size of uncompressed target]
+ * gzip level (4)
+ * method (4)
+ * windowBits (4)
+ * memLevel (4)
+ * strategy (4)
+ * gzip header len (4)
+ * gzip header (gzip header len)
+ * gzip footer (8)
+ * if chunk type == CHUNK_DEFLATE: (version 2 only)
+ * source start (8)
+ * source len (8)
+ * bsdiff patch offset (8) [from start of patch file]
+ * source expanded len (8) [size of uncompressed source]
+ * target expected len (8) [size of uncompressed target]
+ * gzip level (4)
+ * method (4)
+ * windowBits (4)
+ * memLevel (4)
+ * strategy (4)
+ * if chunk type == RAW: (version 2 only)
+ * target len (4)
+ * data (target len)
+ *
+ * All integers are little-endian. "source start" and "source len"
+ * specify the section of the input image that comprises this chunk,
+ * including the gzip header and footer for gzip chunks. "source
+ * expanded len" is the size of the uncompressed source data. "target
+ * expected len" is the size of the uncompressed data after applying
+ * the bsdiff patch. The next five parameters specify the zlib
+ * parameters to be used when compressing the patched data, and the
+ * next three specify the header and footer to be wrapped around the
+ * compressed data to create the output chunk (so that header contents
+ * like the timestamp are recreated exactly).
+ *
+ * After the header there are 'chunk count' bsdiff patches; the offset
+ * of each from the beginning of the file is specified in the header.
+ */
+
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <sys/types.h>
+
+#include "zlib.h"
+#include "imgdiff.h"
+#include "utils.h"
+
+typedef struct {
+ int type; // CHUNK_NORMAL, CHUNK_DEFLATE
+ size_t start; // offset of chunk in original image file
+
+ size_t len;
+ unsigned char* data; // data to be patched (uncompressed, for deflate chunks)
+
+ size_t source_start;
+ size_t source_len;
+
+ off_t* I; // used by bsdiff
+
+ // --- for CHUNK_DEFLATE chunks only: ---
+
+ // original (compressed) deflate data
+ size_t deflate_len;
+ unsigned char* deflate_data;
+
+ char* filename; // used for zip entries
+
+ // deflate encoder parameters
+ int level, method, windowBits, memLevel, strategy;
+
+ size_t source_uncompressed_len;
+} ImageChunk;
+
+typedef struct {
+ int data_offset;
+ int deflate_len;
+ int uncomp_len;
+ char* filename;
+} ZipFileEntry;
+
+static int fileentry_compare(const void* a, const void* b) {
+ int ao = ((ZipFileEntry*)a)->data_offset;
+ int bo = ((ZipFileEntry*)b)->data_offset;
+ if (ao < bo) {
+ return -1;
+ } else if (ao > bo) {
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+// from bsdiff.c
+int bsdiff(u_char* old, off_t oldsize, off_t** IP, u_char* new, off_t newsize,
+ const char* patch_filename);
+
+unsigned char* ReadZip(const char* filename,
+ int* num_chunks, ImageChunk** chunks,
+ int include_pseudo_chunk) {
+ struct stat st;
+ if (stat(filename, &st) != 0) {
+ printf("failed to stat \"%s\": %s\n", filename, strerror(errno));
+ return NULL;
+ }
+
+ unsigned char* img = malloc(st.st_size);
+ FILE* f = fopen(filename, "rb");
+ if (fread(img, 1, st.st_size, f) != st.st_size) {
+ printf("failed to read \"%s\" %s\n", filename, strerror(errno));
+ fclose(f);
+ return NULL;
+ }
+ fclose(f);
+
+ // look for the end-of-central-directory record.
+
+ int i;
+ for (i = st.st_size-20; i >= 0 && i > st.st_size - 65600; --i) {
+ if (img[i] == 0x50 && img[i+1] == 0x4b &&
+ img[i+2] == 0x05 && img[i+3] == 0x06) {
+ break;
+ }
+ }
+ // double-check: this archive consists of a single "disk"
+ if (!(img[i+4] == 0 && img[i+5] == 0 && img[i+6] == 0 && img[i+7] == 0)) {
+ printf("can't process multi-disk archive\n");
+ return NULL;
+ }
+
+ int cdcount = Read2(img+i+8);
+ int cdoffset = Read4(img+i+16);
+
+ ZipFileEntry* temp_entries = malloc(cdcount * sizeof(ZipFileEntry));
+ int entrycount = 0;
+
+ unsigned char* cd = img+cdoffset;
+ for (i = 0; i < cdcount; ++i) {
+ if (!(cd[0] == 0x50 && cd[1] == 0x4b && cd[2] == 0x01 && cd[3] == 0x02)) {
+ printf("bad central directory entry %d\n", i);
+ return NULL;
+ }
+
+ int clen = Read4(cd+20); // compressed len
+ int ulen = Read4(cd+24); // uncompressed len
+ int nlen = Read2(cd+28); // filename len
+ int xlen = Read2(cd+30); // extra field len
+ int mlen = Read2(cd+32); // file comment len
+ int hoffset = Read4(cd+42); // local header offset
+
+ char* filename = malloc(nlen+1);
+ memcpy(filename, cd+46, nlen);
+ filename[nlen] = '\0';
+
+ int method = Read2(cd+10);
+
+ cd += 46 + nlen + xlen + mlen;
+
+ if (method != 8) { // 8 == deflate
+ free(filename);
+ continue;
+ }
+
+ unsigned char* lh = img + hoffset;
+
+ if (!(lh[0] == 0x50 && lh[1] == 0x4b && lh[2] == 0x03 && lh[3] == 0x04)) {
+ printf("bad local file header entry %d\n", i);
+ return NULL;
+ }
+
+ if (Read2(lh+26) != nlen || memcmp(lh+30, filename, nlen) != 0) {
+ printf("central dir filename doesn't match local header\n");
+ return NULL;
+ }
+
+ xlen = Read2(lh+28); // extra field len; might be different from CD entry?
+
+ temp_entries[entrycount].data_offset = hoffset+30+nlen+xlen;
+ temp_entries[entrycount].deflate_len = clen;
+ temp_entries[entrycount].uncomp_len = ulen;
+ temp_entries[entrycount].filename = filename;
+ ++entrycount;
+ }
+
+ qsort(temp_entries, entrycount, sizeof(ZipFileEntry), fileentry_compare);
+
+#if 0
+ printf("found %d deflated entries\n", entrycount);
+ for (i = 0; i < entrycount; ++i) {
+ printf("off %10d len %10d unlen %10d %p %s\n",
+ temp_entries[i].data_offset,
+ temp_entries[i].deflate_len,
+ temp_entries[i].uncomp_len,
+ temp_entries[i].filename,
+ temp_entries[i].filename);
+ }
+#endif
+
+ *num_chunks = 0;
+ *chunks = malloc((entrycount*2+2) * sizeof(ImageChunk));
+ ImageChunk* curr = *chunks;
+
+ if (include_pseudo_chunk) {
+ curr->type = CHUNK_NORMAL;
+ curr->start = 0;
+ curr->len = st.st_size;
+ curr->data = img;
+ curr->filename = NULL;
+ curr->I = NULL;
+ ++curr;
+ ++*num_chunks;
+ }
+
+ int pos = 0;
+ int nextentry = 0;
+
+ while (pos < st.st_size) {
+ if (nextentry < entrycount && pos == temp_entries[nextentry].data_offset) {
+ curr->type = CHUNK_DEFLATE;
+ curr->start = pos;
+ curr->deflate_len = temp_entries[nextentry].deflate_len;
+ curr->deflate_data = img + pos;
+ curr->filename = temp_entries[nextentry].filename;
+ curr->I = NULL;
+
+ curr->len = temp_entries[nextentry].uncomp_len;
+ curr->data = malloc(curr->len);
+
+ z_stream strm;
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = curr->deflate_len;
+ strm.next_in = curr->deflate_data;
+
+ // -15 means we are decoding a 'raw' deflate stream; zlib will
+ // not expect zlib headers.
+ int ret = inflateInit2(&strm, -15);
+
+ strm.avail_out = curr->len;
+ strm.next_out = curr->data;
+ ret = inflate(&strm, Z_NO_FLUSH);
+ if (ret != Z_STREAM_END) {
+ printf("failed to inflate \"%s\"; %d\n", curr->filename, ret);
+ return NULL;
+ }
+
+ inflateEnd(&strm);
+
+ pos += curr->deflate_len;
+ ++nextentry;
+ ++*num_chunks;
+ ++curr;
+ continue;
+ }
+
+ // use a normal chunk to take all the data up to the start of the
+ // next deflate section.
+
+ curr->type = CHUNK_NORMAL;
+ curr->start = pos;
+ if (nextentry < entrycount) {
+ curr->len = temp_entries[nextentry].data_offset - pos;
+ } else {
+ curr->len = st.st_size - pos;
+ }
+ curr->data = img + pos;
+ curr->filename = NULL;
+ curr->I = NULL;
+ pos += curr->len;
+
+ ++*num_chunks;
+ ++curr;
+ }
+
+ free(temp_entries);
+ return img;
+}
+
+/*
+ * Read the given file and break it up into chunks, putting the number
+ * of chunks and their info in *num_chunks and **chunks,
+ * respectively. Returns a malloc'd block of memory containing the
+ * contents of the file; various pointers in the output chunk array
+ * will point into this block of memory. The caller should free the
+ * return value when done with all the chunks. Returns NULL on
+ * failure.
+ */
+unsigned char* ReadImage(const char* filename,
+ int* num_chunks, ImageChunk** chunks) {
+ struct stat st;
+ if (stat(filename, &st) != 0) {
+ printf("failed to stat \"%s\": %s\n", filename, strerror(errno));
+ return NULL;
+ }
+
+ unsigned char* img = malloc(st.st_size + 4);
+ FILE* f = fopen(filename, "rb");
+ if (fread(img, 1, st.st_size, f) != st.st_size) {
+ printf("failed to read \"%s\" %s\n", filename, strerror(errno));
+ fclose(f);
+ return NULL;
+ }
+ fclose(f);
+
+ // append 4 zero bytes to the data so we can always search for the
+ // four-byte string 1f8b0800 starting at any point in the actual
+ // file data, without special-casing the end of the data.
+ memset(img+st.st_size, 0, 4);
+
+ size_t pos = 0;
+
+ *num_chunks = 0;
+ *chunks = NULL;
+
+ while (pos < st.st_size) {
+ unsigned char* p = img+pos;
+
+ if (st.st_size - pos >= 4 &&
+ p[0] == 0x1f && p[1] == 0x8b &&
+ p[2] == 0x08 && // deflate compression
+ p[3] == 0x00) { // no header flags
+ // 'pos' is the offset of the start of a gzip chunk.
+
+ *num_chunks += 3;
+ *chunks = realloc(*chunks, *num_chunks * sizeof(ImageChunk));
+ ImageChunk* curr = *chunks + (*num_chunks-3);
+
+ // create a normal chunk for the header.
+ curr->start = pos;
+ curr->type = CHUNK_NORMAL;
+ curr->len = GZIP_HEADER_LEN;
+ curr->data = p;
+ curr->I = NULL;
+
+ pos += curr->len;
+ p += curr->len;
+ ++curr;
+
+ curr->type = CHUNK_DEFLATE;
+ curr->filename = NULL;
+ curr->I = NULL;
+
+ // We must decompress this chunk in order to discover where it
+ // ends, and so we can put the uncompressed data and its length
+ // into curr->data and curr->len.
+
+ size_t allocated = 32768;
+ curr->len = 0;
+ curr->data = malloc(allocated);
+ curr->start = pos;
+ curr->deflate_data = p;
+
+ z_stream strm;
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = st.st_size - pos;
+ strm.next_in = p;
+
+ // -15 means we are decoding a 'raw' deflate stream; zlib will
+ // not expect zlib headers.
+ int ret = inflateInit2(&strm, -15);
+
+ do {
+ strm.avail_out = allocated - curr->len;
+ strm.next_out = curr->data + curr->len;
+ ret = inflate(&strm, Z_NO_FLUSH);
+ curr->len = allocated - strm.avail_out;
+ if (strm.avail_out == 0) {
+ allocated *= 2;
+ curr->data = realloc(curr->data, allocated);
+ }
+ } while (ret != Z_STREAM_END);
+
+ curr->deflate_len = st.st_size - strm.avail_in - pos;
+ inflateEnd(&strm);
+ pos += curr->deflate_len;
+ p += curr->deflate_len;
+ ++curr;
+
+ // create a normal chunk for the footer
+
+ curr->type = CHUNK_NORMAL;
+ curr->start = pos;
+ curr->len = GZIP_FOOTER_LEN;
+ curr->data = img+pos;
+ curr->I = NULL;
+
+ pos += curr->len;
+ p += curr->len;
+ ++curr;
+
+ // The footer (that we just skipped over) contains the size of
+ // the uncompressed data. Double-check to make sure that it
+ // matches the size of the data we got when we actually did
+ // the decompression.
+ size_t footer_size = Read4(p-4);
+ if (footer_size != curr[-2].len) {
+ printf("Error: footer size %d != decompressed size %d\n",
+ footer_size, curr[-2].len);
+ free(img);
+ return NULL;
+ }
+ } else {
+ // Reallocate the list for every chunk; we expect the number of
+ // chunks to be small (5 for typical boot and recovery images).
+ ++*num_chunks;
+ *chunks = realloc(*chunks, *num_chunks * sizeof(ImageChunk));
+ ImageChunk* curr = *chunks + (*num_chunks-1);
+ curr->start = pos;
+ curr->I = NULL;
+
+ // 'pos' is not the offset of the start of a gzip chunk, so scan
+ // forward until we find a gzip header.
+ curr->type = CHUNK_NORMAL;
+ curr->data = p;
+
+ for (curr->len = 0; curr->len < (st.st_size - pos); ++curr->len) {
+ if (p[curr->len] == 0x1f &&
+ p[curr->len+1] == 0x8b &&
+ p[curr->len+2] == 0x08 &&
+ p[curr->len+3] == 0x00) {
+ break;
+ }
+ }
+ pos += curr->len;
+ }
+ }
+
+ return img;
+}
+
+#define BUFFER_SIZE 32768
+
+/*
+ * Takes the uncompressed data stored in the chunk, compresses it
+ * using the zlib parameters stored in the chunk, and checks that it
+ * matches exactly the compressed data we started with (also stored in
+ * the chunk). Return 0 on success.
+ */
+int TryReconstruction(ImageChunk* chunk, unsigned char* out) {
+ size_t p = 0;
+
+#if 0
+ printf("trying %d %d %d %d %d\n",
+ chunk->level, chunk->method, chunk->windowBits,
+ chunk->memLevel, chunk->strategy);
+#endif
+
+ z_stream strm;
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = chunk->len;
+ strm.next_in = chunk->data;
+ int ret;
+ ret = deflateInit2(&strm, chunk->level, chunk->method, chunk->windowBits,
+ chunk->memLevel, chunk->strategy);
+ do {
+ strm.avail_out = BUFFER_SIZE;
+ strm.next_out = out;
+ ret = deflate(&strm, Z_FINISH);
+ size_t have = BUFFER_SIZE - strm.avail_out;
+
+ if (memcmp(out, chunk->deflate_data+p, have) != 0) {
+ // mismatch; data isn't the same.
+ deflateEnd(&strm);
+ return -1;
+ }
+ p += have;
+ } while (ret != Z_STREAM_END);
+ deflateEnd(&strm);
+ if (p != chunk->deflate_len) {
+ // mismatch; ran out of data before we should have.
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Verify that we can reproduce exactly the same compressed data that
+ * we started with. Sets the level, method, windowBits, memLevel, and
+ * strategy fields in the chunk to the encoding parameters needed to
+ * produce the right output. Returns 0 on success.
+ */
+int ReconstructDeflateChunk(ImageChunk* chunk) {
+ if (chunk->type != CHUNK_DEFLATE) {
+ printf("attempt to reconstruct non-deflate chunk\n");
+ return -1;
+ }
+
+ size_t p = 0;
+ unsigned char* out = malloc(BUFFER_SIZE);
+
+ // We only check two combinations of encoder parameters: level 6
+ // (the default) and level 9 (the maximum).
+ for (chunk->level = 6; chunk->level <= 9; chunk->level += 3) {
+ chunk->windowBits = -15; // 32kb window; negative to indicate a raw stream.
+ chunk->memLevel = 8; // the default value.
+ chunk->method = Z_DEFLATED;
+ chunk->strategy = Z_DEFAULT_STRATEGY;
+
+ if (TryReconstruction(chunk, out) == 0) {
+ free(out);
+ return 0;
+ }
+ }
+
+ free(out);
+ return -1;
+}
+
+/*
+ * Given source and target chunks, compute a bsdiff patch between them
+ * by running bsdiff in a subprocess. Return the patch data, placing
+ * its length in *size. Return NULL on failure. We expect the bsdiff
+ * program to be in the path.
+ */
+unsigned char* MakePatch(ImageChunk* src, ImageChunk* tgt, size_t* size) {
+ if (tgt->type == CHUNK_NORMAL) {
+ if (tgt->len <= 160) {
+ tgt->type = CHUNK_RAW;
+ *size = tgt->len;
+ return tgt->data;
+ }
+ }
+
+ char ptemp[] = "/tmp/imgdiff-patch-XXXXXX";
+ mkstemp(ptemp);
+
+ int r = bsdiff(src->data, src->len, &(src->I), tgt->data, tgt->len, ptemp);
+ if (r != 0) {
+ printf("bsdiff() failed: %d\n", r);
+ return NULL;
+ }
+
+ struct stat st;
+ if (stat(ptemp, &st) != 0) {
+ printf("failed to stat patch file %s: %s\n",
+ ptemp, strerror(errno));
+ return NULL;
+ }
+
+ unsigned char* data = malloc(st.st_size);
+
+ if (tgt->type == CHUNK_NORMAL && tgt->len <= st.st_size) {
+ unlink(ptemp);
+
+ tgt->type = CHUNK_RAW;
+ *size = tgt->len;
+ return tgt->data;
+ }
+
+ *size = st.st_size;
+
+ FILE* f = fopen(ptemp, "rb");
+ if (f == NULL) {
+ printf("failed to open patch %s: %s\n", ptemp, strerror(errno));
+ return NULL;
+ }
+ if (fread(data, 1, st.st_size, f) != st.st_size) {
+ printf("failed to read patch %s: %s\n", ptemp, strerror(errno));
+ return NULL;
+ }
+ fclose(f);
+
+ unlink(ptemp);
+
+ tgt->source_start = src->start;
+ switch (tgt->type) {
+ case CHUNK_NORMAL:
+ tgt->source_len = src->len;
+ break;
+ case CHUNK_DEFLATE:
+ tgt->source_len = src->deflate_len;
+ tgt->source_uncompressed_len = src->len;
+ break;
+ }
+
+ return data;
+}
+
+/*
+ * Cause a gzip chunk to be treated as a normal chunk (ie, as a blob
+ * of uninterpreted data). The resulting patch will likely be about
+ * as big as the target file, but it lets us handle the case of images
+ * where some gzip chunks are reconstructible but others aren't (by
+ * treating the ones that aren't as normal chunks).
+ */
+void ChangeDeflateChunkToNormal(ImageChunk* ch) {
+ if (ch->type != CHUNK_DEFLATE) return;
+ ch->type = CHUNK_NORMAL;
+ free(ch->data);
+ ch->data = ch->deflate_data;
+ ch->len = ch->deflate_len;
+}
+
+/*
+ * Return true if the data in the chunk is identical (including the
+ * compressed representation, for gzip chunks).
+ */
+int AreChunksEqual(ImageChunk* a, ImageChunk* b) {
+ if (a->type != b->type) return 0;
+
+ switch (a->type) {
+ case CHUNK_NORMAL:
+ return a->len == b->len && memcmp(a->data, b->data, a->len) == 0;
+
+ case CHUNK_DEFLATE:
+ return a->deflate_len == b->deflate_len &&
+ memcmp(a->deflate_data, b->deflate_data, a->deflate_len) == 0;
+
+ default:
+ printf("unknown chunk type %d\n", a->type);
+ return 0;
+ }
+}
+
+/*
+ * Look for runs of adjacent normal chunks and compress them down into
+ * a single chunk. (Such runs can be produced when deflate chunks are
+ * changed to normal chunks.)
+ */
+void MergeAdjacentNormalChunks(ImageChunk* chunks, int* num_chunks) {
+ int out = 0;
+ int in_start = 0, in_end;
+ while (in_start < *num_chunks) {
+ if (chunks[in_start].type != CHUNK_NORMAL) {
+ in_end = in_start+1;
+ } else {
+ // in_start is a normal chunk. Look for a run of normal chunks
+ // that constitute a solid block of data (ie, each chunk begins
+ // where the previous one ended).
+ for (in_end = in_start+1;
+ in_end < *num_chunks && chunks[in_end].type == CHUNK_NORMAL &&
+ (chunks[in_end].start ==
+ chunks[in_end-1].start + chunks[in_end-1].len &&
+ chunks[in_end].data ==
+ chunks[in_end-1].data + chunks[in_end-1].len);
+ ++in_end);
+ }
+
+ if (in_end == in_start+1) {
+#if 0
+ printf("chunk %d is now %d\n", in_start, out);
+#endif
+ if (out != in_start) {
+ memcpy(chunks+out, chunks+in_start, sizeof(ImageChunk));
+ }
+ } else {
+#if 0
+ printf("collapse normal chunks %d-%d into %d\n", in_start, in_end-1, out);
+#endif
+
+ // Merge chunks [in_start, in_end-1] into one chunk. Since the
+ // data member of each chunk is just a pointer into an in-memory
+ // copy of the file, this can be done without recopying (the
+ // output chunk has the first chunk's start location and data
+ // pointer, and length equal to the sum of the input chunk
+ // lengths).
+ chunks[out].type = CHUNK_NORMAL;
+ chunks[out].start = chunks[in_start].start;
+ chunks[out].data = chunks[in_start].data;
+ chunks[out].len = chunks[in_end-1].len +
+ (chunks[in_end-1].start - chunks[in_start].start);
+ }
+
+ ++out;
+ in_start = in_end;
+ }
+ *num_chunks = out;
+}
+
+ImageChunk* FindChunkByName(const char* name,
+ ImageChunk* chunks, int num_chunks) {
+ int i;
+ for (i = 0; i < num_chunks; ++i) {
+ if (chunks[i].type == CHUNK_DEFLATE && chunks[i].filename &&
+ strcmp(name, chunks[i].filename) == 0) {
+ return chunks+i;
+ }
+ }
+ return NULL;
+}
+
+void DumpChunks(ImageChunk* chunks, int num_chunks) {
+ int i;
+ for (i = 0; i < num_chunks; ++i) {
+ printf("chunk %d: type %d start %d len %d\n",
+ i, chunks[i].type, chunks[i].start, chunks[i].len);
+ }
+}
+
+int main(int argc, char** argv) {
+ if (argc != 4 && argc != 5) {
+ usage:
+ printf("usage: %s [-z] <src-img> <tgt-img> <patch-file>\n",
+ argv[0]);
+ return 2;
+ }
+
+ int zip_mode = 0;
+
+ if (strcmp(argv[1], "-z") == 0) {
+ zip_mode = 1;
+ --argc;
+ ++argv;
+ }
+
+
+ int num_src_chunks;
+ ImageChunk* src_chunks;
+ int num_tgt_chunks;
+ ImageChunk* tgt_chunks;
+ int i;
+
+ if (zip_mode) {
+ if (ReadZip(argv[1], &num_src_chunks, &src_chunks, 1) == NULL) {
+ printf("failed to break apart source zip file\n");
+ return 1;
+ }
+ if (ReadZip(argv[2], &num_tgt_chunks, &tgt_chunks, 0) == NULL) {
+ printf("failed to break apart target zip file\n");
+ return 1;
+ }
+ } else {
+ if (ReadImage(argv[1], &num_src_chunks, &src_chunks) == NULL) {
+ printf("failed to break apart source image\n");
+ return 1;
+ }
+ if (ReadImage(argv[2], &num_tgt_chunks, &tgt_chunks) == NULL) {
+ printf("failed to break apart target image\n");
+ return 1;
+ }
+
+ // Verify that the source and target images have the same chunk
+ // structure (ie, the same sequence of deflate and normal chunks).
+
+ if (!zip_mode) {
+ // Merge the gzip header and footer in with any adjacent
+ // normal chunks.
+ MergeAdjacentNormalChunks(tgt_chunks, &num_tgt_chunks);
+ MergeAdjacentNormalChunks(src_chunks, &num_src_chunks);
+ }
+
+ if (num_src_chunks != num_tgt_chunks) {
+ printf("source and target don't have same number of chunks!\n");
+ printf("source chunks:\n");
+ DumpChunks(src_chunks, num_src_chunks);
+ printf("target chunks:\n");
+ DumpChunks(tgt_chunks, num_tgt_chunks);
+ return 1;
+ }
+ for (i = 0; i < num_src_chunks; ++i) {
+ if (src_chunks[i].type != tgt_chunks[i].type) {
+ printf("source and target don't have same chunk "
+ "structure! (chunk %d)\n", i);
+ printf("source chunks:\n");
+ DumpChunks(src_chunks, num_src_chunks);
+ printf("target chunks:\n");
+ DumpChunks(tgt_chunks, num_tgt_chunks);
+ return 1;
+ }
+ }
+ }
+
+ for (i = 0; i < num_tgt_chunks; ++i) {
+ if (tgt_chunks[i].type == CHUNK_DEFLATE) {
+ // Confirm that given the uncompressed chunk data in the target, we
+ // can recompress it and get exactly the same bits as are in the
+ // input target image. If this fails, treat the chunk as a normal
+ // non-deflated chunk.
+ if (ReconstructDeflateChunk(tgt_chunks+i) < 0) {
+ printf("failed to reconstruct target deflate chunk %d [%s]; "
+ "treating as normal\n", i, tgt_chunks[i].filename);
+ ChangeDeflateChunkToNormal(tgt_chunks+i);
+ if (zip_mode) {
+ ImageChunk* src = FindChunkByName(tgt_chunks[i].filename, src_chunks, num_src_chunks);
+ if (src) {
+ ChangeDeflateChunkToNormal(src);
+ }
+ } else {
+ ChangeDeflateChunkToNormal(src_chunks+i);
+ }
+ continue;
+ }
+
+ // If two deflate chunks are identical (eg, the kernel has not
+ // changed between two builds), treat them as normal chunks.
+ // This makes applypatch much faster -- it can apply a trivial
+ // patch to the compressed data, rather than uncompressing and
+ // recompressing to apply the trivial patch to the uncompressed
+ // data.
+ ImageChunk* src;
+ if (zip_mode) {
+ src = FindChunkByName(tgt_chunks[i].filename, src_chunks, num_src_chunks);
+ } else {
+ src = src_chunks+i;
+ }
+
+ if (src == NULL || AreChunksEqual(tgt_chunks+i, src)) {
+ ChangeDeflateChunkToNormal(tgt_chunks+i);
+ if (src) {
+ ChangeDeflateChunkToNormal(src);
+ }
+ }
+ }
+ }
+
+ // Merging neighboring normal chunks.
+ if (zip_mode) {
+ // For zips, we only need to do this to the target: deflated
+ // chunks are matched via filename, and normal chunks are patched
+ // using the entire source file as the source.
+ MergeAdjacentNormalChunks(tgt_chunks, &num_tgt_chunks);
+ } else {
+ // For images, we need to maintain the parallel structure of the
+ // chunk lists, so do the merging in both the source and target
+ // lists.
+ MergeAdjacentNormalChunks(tgt_chunks, &num_tgt_chunks);
+ MergeAdjacentNormalChunks(src_chunks, &num_src_chunks);
+ if (num_src_chunks != num_tgt_chunks) {
+ // This shouldn't happen.
+ printf("merging normal chunks went awry\n");
+ return 1;
+ }
+ }
+
+ // Compute bsdiff patches for each chunk's data (the uncompressed
+ // data, in the case of deflate chunks).
+
+ printf("Construct patches for %d chunks...\n", num_tgt_chunks);
+ unsigned char** patch_data = malloc(num_tgt_chunks * sizeof(unsigned char*));
+ size_t* patch_size = malloc(num_tgt_chunks * sizeof(size_t));
+ for (i = 0; i < num_tgt_chunks; ++i) {
+ if (zip_mode) {
+ ImageChunk* src;
+ if (tgt_chunks[i].type == CHUNK_DEFLATE &&
+ (src = FindChunkByName(tgt_chunks[i].filename, src_chunks,
+ num_src_chunks))) {
+ patch_data[i] = MakePatch(src, tgt_chunks+i, patch_size+i);
+ } else {
+ patch_data[i] = MakePatch(src_chunks, tgt_chunks+i, patch_size+i);
+ }
+ } else {
+ patch_data[i] = MakePatch(src_chunks+i, tgt_chunks+i, patch_size+i);
+ }
+ printf("patch %3d is %d bytes (of %d)\n",
+ i, patch_size[i], tgt_chunks[i].source_len);
+ }
+
+ // Figure out how big the imgdiff file header is going to be, so
+ // that we can correctly compute the offset of each bsdiff patch
+ // within the file.
+
+ size_t total_header_size = 12;
+ for (i = 0; i < num_tgt_chunks; ++i) {
+ total_header_size += 4;
+ switch (tgt_chunks[i].type) {
+ case CHUNK_NORMAL:
+ total_header_size += 8*3;
+ break;
+ case CHUNK_DEFLATE:
+ total_header_size += 8*5 + 4*5;
+ break;
+ case CHUNK_RAW:
+ total_header_size += 4 + patch_size[i];
+ break;
+ }
+ }
+
+ size_t offset = total_header_size;
+
+ FILE* f = fopen(argv[3], "wb");
+
+ // Write out the headers.
+
+ fwrite("IMGDIFF2", 1, 8, f);
+ Write4(num_tgt_chunks, f);
+ for (i = 0; i < num_tgt_chunks; ++i) {
+ Write4(tgt_chunks[i].type, f);
+
+ switch (tgt_chunks[i].type) {
+ case CHUNK_NORMAL:
+ printf("chunk %3d: normal (%10d, %10d) %10d\n", i,
+ tgt_chunks[i].start, tgt_chunks[i].len, patch_size[i]);
+ Write8(tgt_chunks[i].source_start, f);
+ Write8(tgt_chunks[i].source_len, f);
+ Write8(offset, f);
+ offset += patch_size[i];
+ break;
+
+ case CHUNK_DEFLATE:
+ printf("chunk %3d: deflate (%10d, %10d) %10d %s\n", i,
+ tgt_chunks[i].start, tgt_chunks[i].deflate_len, patch_size[i],
+ tgt_chunks[i].filename);
+ Write8(tgt_chunks[i].source_start, f);
+ Write8(tgt_chunks[i].source_len, f);
+ Write8(offset, f);
+ Write8(tgt_chunks[i].source_uncompressed_len, f);
+ Write8(tgt_chunks[i].len, f);
+ Write4(tgt_chunks[i].level, f);
+ Write4(tgt_chunks[i].method, f);
+ Write4(tgt_chunks[i].windowBits, f);
+ Write4(tgt_chunks[i].memLevel, f);
+ Write4(tgt_chunks[i].strategy, f);
+ offset += patch_size[i];
+ break;
+
+ case CHUNK_RAW:
+ printf("chunk %3d: raw (%10d, %10d)\n", i,
+ tgt_chunks[i].start, tgt_chunks[i].len);
+ Write4(patch_size[i], f);
+ fwrite(patch_data[i], 1, patch_size[i], f);
+ break;
+ }
+ }
+
+ // Append each chunk's bsdiff patch, in order.
+
+ for (i = 0; i < num_tgt_chunks; ++i) {
+ if (tgt_chunks[i].type != CHUNK_RAW) {
+ fwrite(patch_data[i], 1, patch_size[i], f);
+ }
+ }
+
+ fclose(f);
+
+ return 0;
+}
diff --git a/applypatch/imgdiff.h b/applypatch/imgdiff.h
new file mode 100644
index 000000000..f2069b4f3
--- /dev/null
+++ b/applypatch/imgdiff.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2009 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+// Image patch chunk types
+#define CHUNK_NORMAL 0
+#define CHUNK_GZIP 1 // version 1 only
+#define CHUNK_DEFLATE 2 // version 2 only
+#define CHUNK_RAW 3 // version 2 only
+
+// The gzip header size is actually variable, but we currently don't
+// support gzipped data with any of the optional fields, so for now it
+// will always be ten bytes. See RFC 1952 for the definition of the
+// gzip format.
+#define GZIP_HEADER_LEN 10
+
+// The gzip footer size really is fixed.
+#define GZIP_FOOTER_LEN 8
diff --git a/applypatch/imgdiff_test.sh b/applypatch/imgdiff_test.sh
new file mode 100755
index 000000000..dcdb922b4
--- /dev/null
+++ b/applypatch/imgdiff_test.sh
@@ -0,0 +1,118 @@
+#!/bin/bash
+#
+# A script for testing imgdiff/applypatch. It takes two full OTA
+# packages as arguments. It generates (on the host) patches for all
+# the zip/jar/apk files they have in common, as well as boot and
+# recovery images. It then applies the patches on the device (or
+# emulator) and checks that the resulting file is correct.
+
+EMULATOR_PORT=5580
+
+# set to 0 to use a device instead
+USE_EMULATOR=0
+
+# where on the device to do all the patching.
+WORK_DIR=/data/local/tmp
+
+START_OTA_PACKAGE=$1
+END_OTA_PACKAGE=$2
+
+# ------------------------
+
+tmpdir=$(mktemp -d)
+
+if [ "$USE_EMULATOR" == 1 ]; then
+ emulator -wipe-data -noaudio -no-window -port $EMULATOR_PORT &
+ pid_emulator=$!
+ ADB="adb -s emulator-$EMULATOR_PORT "
+else
+ ADB="adb -d "
+fi
+
+echo "waiting to connect to device"
+$ADB wait-for-device
+
+# run a command on the device; exit with the exit status of the device
+# command.
+run_command() {
+ $ADB shell "$@" \; echo \$? | awk '{if (b) {print a}; a=$0; b=1} END {exit a}'
+}
+
+testname() {
+ echo
+ echo "$1"...
+ testname="$1"
+}
+
+fail() {
+ echo
+ echo FAIL: $testname
+ echo
+ [ "$open_pid" == "" ] || kill $open_pid
+ [ "$pid_emulator" == "" ] || kill $pid_emulator
+ exit 1
+}
+
+sha1() {
+ sha1sum $1 | awk '{print $1}'
+}
+
+size() {
+ stat -c %s $1 | tr -d '\n'
+}
+
+cleanup() {
+ # not necessary if we're about to kill the emulator, but nice for
+ # running on real devices or already-running emulators.
+ testname "removing test files"
+ run_command rm $WORK_DIR/applypatch
+ run_command rm $WORK_DIR/source
+ run_command rm $WORK_DIR/target
+ run_command rm $WORK_DIR/patch
+
+ [ "$pid_emulator" == "" ] || kill $pid_emulator
+
+ rm -rf $tmpdir
+}
+
+$ADB push $ANDROID_PRODUCT_OUT/system/bin/applypatch $WORK_DIR/applypatch
+
+patch_and_apply() {
+ local fn=$1
+ shift
+
+ unzip -p $START_OTA_PACKAGE $fn > $tmpdir/source
+ unzip -p $END_OTA_PACKAGE $fn > $tmpdir/target
+ imgdiff "$@" $tmpdir/source $tmpdir/target $tmpdir/patch
+ bsdiff $tmpdir/source $tmpdir/target $tmpdir/patch.bs
+ echo "patch for $fn is $(size $tmpdir/patch) [of $(size $tmpdir/target)] ($(size $tmpdir/patch.bs) with bsdiff)"
+ echo "$fn $(size $tmpdir/patch) of $(size $tmpdir/target) bsdiff $(size $tmpdir/patch.bs)" >> /tmp/stats.txt
+ $ADB push $tmpdir/source $WORK_DIR/source || fail "source push failed"
+ run_command rm /data/local/tmp/target
+ $ADB push $tmpdir/patch $WORK_DIR/patch || fail "patch push failed"
+ run_command /data/local/tmp/applypatch /data/local/tmp/source \
+ /data/local/tmp/target $(sha1 $tmpdir/target) $(size $tmpdir/target) \
+ $(sha1 $tmpdir/source):/data/local/tmp/patch \
+ || fail "applypatch of $fn failed"
+ $ADB pull /data/local/tmp/target $tmpdir/result
+ diff -q $tmpdir/target $tmpdir/result || fail "patch output not correct!"
+}
+
+# --------------- basic execution ----------------------
+
+for i in $((zipinfo -1 $START_OTA_PACKAGE; zipinfo -1 $END_OTA_PACKAGE) | \
+ sort | uniq -d | egrep -e '[.](apk|jar|zip)$'); do
+ patch_and_apply $i -z
+done
+patch_and_apply boot.img
+patch_and_apply system/recovery.img
+
+
+# --------------- cleanup ----------------------
+
+cleanup
+
+echo
+echo PASS
+echo
+
diff --git a/applypatch/imgpatch.c b/applypatch/imgpatch.c
new file mode 100644
index 000000000..53228174f
--- /dev/null
+++ b/applypatch/imgpatch.c
@@ -0,0 +1,364 @@
+/*
+ * Copyright (C) 2009 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+// See imgdiff.c in this directory for a description of the patch file
+// format.
+
+#include <stdio.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include <unistd.h>
+#include <string.h>
+
+#include "zlib.h"
+#include "mincrypt/sha.h"
+#include "applypatch.h"
+#include "imgdiff.h"
+#include "utils.h"
+
+/*
+ * Apply the patch given in 'patch_filename' to the source data given
+ * by (old_data, old_size). Write the patched output to the 'output'
+ * file, and update the SHA context with the output data as well.
+ * Return 0 on success.
+ */
+int ApplyImagePatch(const unsigned char* old_data, ssize_t old_size,
+ const char* patch_filename,
+ SinkFn sink, void* token, SHA_CTX* ctx) {
+ FILE* f;
+ if ((f = fopen(patch_filename, "rb")) == NULL) {
+ printf("failed to open patch file\n");
+ return -1;
+ }
+
+ unsigned char header[12];
+ if (fread(header, 1, 12, f) != 12) {
+ printf("failed to read patch file header\n");
+ return -1;
+ }
+
+ // IMGDIFF1 uses CHUNK_NORMAL and CHUNK_GZIP.
+ // IMGDIFF2 uses CHUNK_NORMAL, CHUNK_DEFLATE, and CHUNK_RAW.
+ if (memcmp(header, "IMGDIFF", 7) != 0 ||
+ (header[7] != '1' && header[7] != '2')) {
+ printf("corrupt patch file header (magic number)\n");
+ return -1;
+ }
+
+ int num_chunks = Read4(header+8);
+
+ int i;
+ for (i = 0; i < num_chunks; ++i) {
+ // each chunk's header record starts with 4 bytes.
+ unsigned char chunk[4];
+ if (fread(chunk, 1, 4, f) != 4) {
+ printf("failed to read chunk %d record\n", i);
+ return -1;
+ }
+
+ int type = Read4(chunk);
+
+ if (type == CHUNK_NORMAL) {
+ unsigned char normal_header[24];
+ if (fread(normal_header, 1, 24, f) != 24) {
+ printf("failed to read chunk %d normal header data\n", i);
+ return -1;
+ }
+
+ size_t src_start = Read8(normal_header);
+ size_t src_len = Read8(normal_header+8);
+ size_t patch_offset = Read8(normal_header+16);
+
+ printf("CHUNK %d: normal patch offset %d\n", i, patch_offset);
+
+ ApplyBSDiffPatch(old_data + src_start, src_len,
+ patch_filename, patch_offset,
+ sink, token, ctx);
+ } else if (type == CHUNK_GZIP) {
+ // This branch is basically a duplicate of the CHUNK_DEFLATE
+ // branch, with a bit of extra processing for the gzip header
+ // and footer. I've avoided factoring the common code out since
+ // this branch will just be deleted when we drop support for
+ // IMGDIFF1.
+
+ // gzip chunks have an additional 64 + gzip_header_len + 8 bytes
+ // in their chunk header.
+ unsigned char* gzip = malloc(64);
+ if (fread(gzip, 1, 64, f) != 64) {
+ printf("failed to read chunk %d initial gzip header data\n",
+ i);
+ return -1;
+ }
+ size_t gzip_header_len = Read4(gzip+60);
+ gzip = realloc(gzip, 64 + gzip_header_len + 8);
+ if (fread(gzip+64, 1, gzip_header_len+8, f) != gzip_header_len+8) {
+ printf("failed to read chunk %d remaining gzip header data\n",
+ i);
+ return -1;
+ }
+
+ size_t src_start = Read8(gzip);
+ size_t src_len = Read8(gzip+8);
+ size_t patch_offset = Read8(gzip+16);
+
+ size_t expanded_len = Read8(gzip+24);
+ size_t target_len = Read8(gzip+32);
+ int gz_level = Read4(gzip+40);
+ int gz_method = Read4(gzip+44);
+ int gz_windowBits = Read4(gzip+48);
+ int gz_memLevel = Read4(gzip+52);
+ int gz_strategy = Read4(gzip+56);
+
+ printf("CHUNK %d: gzip patch offset %d\n", i, patch_offset);
+
+ // Decompress the source data; the chunk header tells us exactly
+ // how big we expect it to be when decompressed.
+
+ unsigned char* expanded_source = malloc(expanded_len);
+ if (expanded_source == NULL) {
+ printf("failed to allocate %d bytes for expanded_source\n",
+ expanded_len);
+ return -1;
+ }
+
+ z_stream strm;
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = src_len - (gzip_header_len + 8);
+ strm.next_in = (unsigned char*)(old_data + src_start + gzip_header_len);
+ strm.avail_out = expanded_len;
+ strm.next_out = expanded_source;
+
+ int ret;
+ ret = inflateInit2(&strm, -15);
+ if (ret != Z_OK) {
+ printf("failed to init source inflation: %d\n", ret);
+ return -1;
+ }
+
+ // Because we've provided enough room to accommodate the output
+ // data, we expect one call to inflate() to suffice.
+ ret = inflate(&strm, Z_SYNC_FLUSH);
+ if (ret != Z_STREAM_END) {
+ printf("source inflation returned %d\n", ret);
+ return -1;
+ }
+ // We should have filled the output buffer exactly.
+ if (strm.avail_out != 0) {
+ printf("source inflation short by %d bytes\n", strm.avail_out);
+ return -1;
+ }
+ inflateEnd(&strm);
+
+ // Next, apply the bsdiff patch (in memory) to the uncompressed
+ // data.
+ unsigned char* uncompressed_target_data;
+ ssize_t uncompressed_target_size;
+ if (ApplyBSDiffPatchMem(expanded_source, expanded_len,
+ patch_filename, patch_offset,
+ &uncompressed_target_data,
+ &uncompressed_target_size) != 0) {
+ return -1;
+ }
+
+ // Now compress the target data and append it to the output.
+
+ // start with the gzip header.
+ sink(gzip+64, gzip_header_len, token);
+ SHA_update(ctx, gzip+64, gzip_header_len);
+
+ // we're done with the expanded_source data buffer, so we'll
+ // reuse that memory to receive the output of deflate.
+ unsigned char* temp_data = expanded_source;
+ ssize_t temp_size = expanded_len;
+ if (temp_size < 32768) {
+ // ... unless the buffer is too small, in which case we'll
+ // allocate a fresh one.
+ free(temp_data);
+ temp_data = malloc(32768);
+ temp_size = 32768;
+ }
+
+ // now the deflate stream
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = uncompressed_target_size;
+ strm.next_in = uncompressed_target_data;
+ ret = deflateInit2(&strm, gz_level, gz_method, gz_windowBits,
+ gz_memLevel, gz_strategy);
+ do {
+ strm.avail_out = temp_size;
+ strm.next_out = temp_data;
+ ret = deflate(&strm, Z_FINISH);
+ size_t have = temp_size - strm.avail_out;
+
+ if (sink(temp_data, have, token) != have) {
+ printf("failed to write %d compressed bytes to output\n",
+ have);
+ return -1;
+ }
+ SHA_update(ctx, temp_data, have);
+ } while (ret != Z_STREAM_END);
+ deflateEnd(&strm);
+
+ // lastly, the gzip footer.
+ sink(gzip+64+gzip_header_len, 8, token);
+ SHA_update(ctx, gzip+64+gzip_header_len, 8);
+
+ free(temp_data);
+ free(uncompressed_target_data);
+ free(gzip);
+ } else if (type == CHUNK_RAW) {
+ unsigned char raw_header[4];
+ if (fread(raw_header, 1, 4, f) != 4) {
+ printf("failed to read chunk %d raw header data\n", i);
+ return -1;
+ }
+
+ size_t data_len = Read4(raw_header);
+
+ printf("CHUNK %d: raw data %d\n", i, data_len);
+
+ unsigned char* temp = malloc(data_len);
+ if (fread(temp, 1, data_len, f) != data_len) {
+ printf("failed to read chunk %d raw data\n", i);
+ return -1;
+ }
+ SHA_update(ctx, temp, data_len);
+ if (sink(temp, data_len, token) != data_len) {
+ printf("failed to write chunk %d raw data\n", i);
+ return -1;
+ }
+ } else if (type == CHUNK_DEFLATE) {
+ // deflate chunks have an additional 60 bytes in their chunk header.
+ unsigned char deflate_header[60];
+ if (fread(deflate_header, 1, 60, f) != 60) {
+ printf("failed to read chunk %d deflate header data\n", i);
+ return -1;
+ }
+
+ size_t src_start = Read8(deflate_header);
+ size_t src_len = Read8(deflate_header+8);
+ size_t patch_offset = Read8(deflate_header+16);
+ size_t expanded_len = Read8(deflate_header+24);
+ size_t target_len = Read8(deflate_header+32);
+ int level = Read4(deflate_header+40);
+ int method = Read4(deflate_header+44);
+ int windowBits = Read4(deflate_header+48);
+ int memLevel = Read4(deflate_header+52);
+ int strategy = Read4(deflate_header+56);
+
+ printf("CHUNK %d: deflate patch offset %d\n", i, patch_offset);
+
+ // Decompress the source data; the chunk header tells us exactly
+ // how big we expect it to be when decompressed.
+
+ unsigned char* expanded_source = malloc(expanded_len);
+ if (expanded_source == NULL) {
+ printf("failed to allocate %d bytes for expanded_source\n",
+ expanded_len);
+ return -1;
+ }
+
+ z_stream strm;
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = src_len;
+ strm.next_in = (unsigned char*)(old_data + src_start);
+ strm.avail_out = expanded_len;
+ strm.next_out = expanded_source;
+
+ int ret;
+ ret = inflateInit2(&strm, -15);
+ if (ret != Z_OK) {
+ printf("failed to init source inflation: %d\n", ret);
+ return -1;
+ }
+
+ // Because we've provided enough room to accommodate the output
+ // data, we expect one call to inflate() to suffice.
+ ret = inflate(&strm, Z_SYNC_FLUSH);
+ if (ret != Z_STREAM_END) {
+ printf("source inflation returned %d\n", ret);
+ return -1;
+ }
+ // We should have filled the output buffer exactly.
+ if (strm.avail_out != 0) {
+ printf("source inflation short by %d bytes\n", strm.avail_out);
+ return -1;
+ }
+ inflateEnd(&strm);
+
+ // Next, apply the bsdiff patch (in memory) to the uncompressed
+ // data.
+ unsigned char* uncompressed_target_data;
+ ssize_t uncompressed_target_size;
+ if (ApplyBSDiffPatchMem(expanded_source, expanded_len,
+ patch_filename, patch_offset,
+ &uncompressed_target_data,
+ &uncompressed_target_size) != 0) {
+ return -1;
+ }
+
+ // Now compress the target data and append it to the output.
+
+ // we're done with the expanded_source data buffer, so we'll
+ // reuse that memory to receive the output of deflate.
+ unsigned char* temp_data = expanded_source;
+ ssize_t temp_size = expanded_len;
+ if (temp_size < 32768) {
+ // ... unless the buffer is too small, in which case we'll
+ // allocate a fresh one.
+ free(temp_data);
+ temp_data = malloc(32768);
+ temp_size = 32768;
+ }
+
+ // now the deflate stream
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = uncompressed_target_size;
+ strm.next_in = uncompressed_target_data;
+ ret = deflateInit2(&strm, level, method, windowBits, memLevel, strategy);
+ do {
+ strm.avail_out = temp_size;
+ strm.next_out = temp_data;
+ ret = deflate(&strm, Z_FINISH);
+ size_t have = temp_size - strm.avail_out;
+
+ if (sink(temp_data, have, token) != have) {
+ printf("failed to write %d compressed bytes to output\n",
+ have);
+ return -1;
+ }
+ SHA_update(ctx, temp_data, have);
+ } while (ret != Z_STREAM_END);
+ deflateEnd(&strm);
+
+ free(temp_data);
+ free(uncompressed_target_data);
+ } else {
+ printf("patch chunk %d is unknown type %d\n", i, type);
+ return -1;
+ }
+ }
+
+ return 0;
+}
diff --git a/applypatch/main.c b/applypatch/main.c
new file mode 100644
index 000000000..e08f5c1eb
--- /dev/null
+++ b/applypatch/main.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2009 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdio.h>
+
+extern int applypatch(int argc, char** argv);
+
+// This program applies binary patches to files in a way that is safe
+// (the original file is not touched until we have the desired
+// replacement for it) and idempotent (it's okay to run this program
+// multiple times).
+//
+// - if the sha1 hash of <tgt-file> is <tgt-sha1>, does nothing and exits
+// successfully.
+//
+// - otherwise, if the sha1 hash of <src-file> is <src-sha1>, applies the
+// bsdiff <patch> to <src-file> to produce a new file (the type of patch
+// is automatically detected from the file header). If that new
+// file has sha1 hash <tgt-sha1>, moves it to replace <tgt-file>, and
+// exits successfully. Note that if <src-file> and <tgt-file> are
+// not the same, <src-file> is NOT deleted on success. <tgt-file>
+// may be the string "-" to mean "the same as src-file".
+//
+// - otherwise, or if any error is encountered, exits with non-zero
+// status.
+//
+// <src-file> (or <file> in check mode) may refer to an MTD partition
+// to read the source data. See the comments for the
+// LoadMTDContents() function above for the format of such a filename.
+
+int main(int argc, char** argv) {
+ int result = applypatch(argc, argv);
+ if (result == 2) {
+ printf(
+ "usage: %s <src-file> <tgt-file> <tgt-sha1> <tgt-size> "
+ "[<src-sha1>:<patch> ...]\n"
+ " or %s -c <file> [<sha1> ...]\n"
+ " or %s -s <bytes>\n"
+ " or %s -l\n"
+ "\n"
+ "Filenames may be of the form\n"
+ " MTD:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:...\n"
+ "to specify reading from or writing to an MTD partition.\n\n",
+ argv[0], argv[0], argv[0], argv[0]);
+ }
+ return result;
+}
diff --git a/applypatch/testdata/new.file b/applypatch/testdata/new.file
new file mode 100644
index 000000000..cdeb8fd50
--- /dev/null
+++ b/applypatch/testdata/new.file
Binary files differ
diff --git a/applypatch/testdata/old.file b/applypatch/testdata/old.file
new file mode 100644
index 000000000..166c8732e
--- /dev/null
+++ b/applypatch/testdata/old.file
Binary files differ
diff --git a/applypatch/testdata/patch.bsdiff b/applypatch/testdata/patch.bsdiff
new file mode 100644
index 000000000..b78d38573
--- /dev/null
+++ b/applypatch/testdata/patch.bsdiff
Binary files differ
diff --git a/applypatch/utils.c b/applypatch/utils.c
new file mode 100644
index 000000000..912229bcf
--- /dev/null
+++ b/applypatch/utils.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2009 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdio.h>
+
+#include "utils.h"
+
+/** Write a 4-byte value to f in little-endian order. */
+void Write4(int value, FILE* f) {
+ fputc(value & 0xff, f);
+ fputc((value >> 8) & 0xff, f);
+ fputc((value >> 16) & 0xff, f);
+ fputc((value >> 24) & 0xff, f);
+}
+
+/** Write an 8-byte value to f in little-endian order. */
+void Write8(long long value, FILE* f) {
+ fputc(value & 0xff, f);
+ fputc((value >> 8) & 0xff, f);
+ fputc((value >> 16) & 0xff, f);
+ fputc((value >> 24) & 0xff, f);
+ fputc((value >> 32) & 0xff, f);
+ fputc((value >> 40) & 0xff, f);
+ fputc((value >> 48) & 0xff, f);
+ fputc((value >> 56) & 0xff, f);
+}
+
+int Read2(unsigned char* p) {
+ return (int)(((unsigned int)p[1] << 8) |
+ (unsigned int)p[0]);
+}
+
+int Read4(unsigned char* p) {
+ return (int)(((unsigned int)p[3] << 24) |
+ ((unsigned int)p[2] << 16) |
+ ((unsigned int)p[1] << 8) |
+ (unsigned int)p[0]);
+}
+
+long long Read8(unsigned char* p) {
+ return (long long)(((unsigned long long)p[7] << 56) |
+ ((unsigned long long)p[6] << 48) |
+ ((unsigned long long)p[5] << 40) |
+ ((unsigned long long)p[4] << 32) |
+ ((unsigned long long)p[3] << 24) |
+ ((unsigned long long)p[2] << 16) |
+ ((unsigned long long)p[1] << 8) |
+ (unsigned long long)p[0]);
+}
diff --git a/applypatch/utils.h b/applypatch/utils.h
new file mode 100644
index 000000000..d6d6f1d3e
--- /dev/null
+++ b/applypatch/utils.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2009 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef _BUILD_TOOLS_APPLYPATCH_UTILS_H
+#define _BUILD_TOOLS_APPLYPATCH_UTILS_H
+
+#include <stdio.h>
+
+// Read and write little-endian values of various sizes.
+
+void Write4(int value, FILE* f);
+void Write8(long long value, FILE* f);
+int Read2(unsigned char* p);
+int Read4(unsigned char* p);
+long long Read8(unsigned char* p);
+
+#endif // _BUILD_TOOLS_APPLYPATCH_UTILS_H
diff --git a/edify/expr.c b/edify/expr.c
index df3c1ab76..7a5b2fbf8 100644
--- a/edify/expr.c
+++ b/edify/expr.c
@@ -33,12 +33,39 @@ int BooleanString(const char* s) {
}
char* Evaluate(State* state, Expr* expr) {
+ Value* v = expr->fn(expr->name, state, expr->argc, expr->argv);
+ if (v == NULL) return NULL;
+ if (v->type != VAL_STRING) {
+ ErrorAbort(state, "expecting string, got value type %d", v->type);
+ FreeValue(v);
+ return NULL;
+ }
+ char* result = v->data;
+ free(v);
+ return result;
+}
+
+Value* EvaluateValue(State* state, Expr* expr) {
return expr->fn(expr->name, state, expr->argc, expr->argv);
}
-char* ConcatFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* StringValue(char* str) {
+ Value* v = malloc(sizeof(Value));
+ v->type = VAL_STRING;
+ v->size = strlen(str);
+ v->data = str;
+ return v;
+}
+
+void FreeValue(Value* v) {
+ if (v == NULL) return;
+ free(v->data);
+ free(v);
+}
+
+Value* ConcatFn(const char* name, State* state, int argc, Expr* argv[]) {
if (argc == 0) {
- return strdup("");
+ return StringValue(strdup(""));
}
char** strings = malloc(argc * sizeof(char*));
int i;
@@ -68,10 +95,10 @@ char* ConcatFn(const char* name, State* state, int argc, Expr* argv[]) {
free(strings[i]);
}
free(strings);
- return result;
+ return StringValue(result);
}
-char* IfElseFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* IfElseFn(const char* name, State* state, int argc, Expr* argv[]) {
if (argc != 2 && argc != 3) {
free(state->errmsg);
state->errmsg = strdup("ifelse expects 2 or 3 arguments");
@@ -84,18 +111,18 @@ char* IfElseFn(const char* name, State* state, int argc, Expr* argv[]) {
if (BooleanString(cond) == true) {
free(cond);
- return Evaluate(state, argv[1]);
+ return EvaluateValue(state, argv[1]);
} else {
if (argc == 3) {
free(cond);
- return Evaluate(state, argv[2]);
+ return EvaluateValue(state, argv[2]);
} else {
- return cond;
+ return StringValue(cond);
}
}
}
-char* AbortFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* AbortFn(const char* name, State* state, int argc, Expr* argv[]) {
char* msg = NULL;
if (argc > 0) {
msg = Evaluate(state, argv[0]);
@@ -109,7 +136,7 @@ char* AbortFn(const char* name, State* state, int argc, Expr* argv[]) {
return NULL;
}
-char* AssertFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* AssertFn(const char* name, State* state, int argc, Expr* argv[]) {
int i;
for (i = 0; i < argc; ++i) {
char* v = Evaluate(state, argv[i]);
@@ -131,20 +158,20 @@ char* AssertFn(const char* name, State* state, int argc, Expr* argv[]) {
return NULL;
}
}
- return strdup("");
+ return StringValue(strdup(""));
}
-char* SleepFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* SleepFn(const char* name, State* state, int argc, Expr* argv[]) {
char* val = Evaluate(state, argv[0]);
if (val == NULL) {
return NULL;
}
int v = strtol(val, NULL, 10);
sleep(v);
- return val;
+ return StringValue(val);
}
-char* StdoutFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* StdoutFn(const char* name, State* state, int argc, Expr* argv[]) {
int i;
for (i = 0; i < argc; ++i) {
char* v = Evaluate(state, argv[i]);
@@ -154,48 +181,44 @@ char* StdoutFn(const char* name, State* state, int argc, Expr* argv[]) {
fputs(v, stdout);
free(v);
}
- return strdup("");
+ return StringValue(strdup(""));
}
-char* LogicalAndFn(const char* name, State* state,
+Value* LogicalAndFn(const char* name, State* state,
int argc, Expr* argv[]) {
char* left = Evaluate(state, argv[0]);
if (left == NULL) return NULL;
if (BooleanString(left) == true) {
free(left);
- return Evaluate(state, argv[1]);
+ return EvaluateValue(state, argv[1]);
} else {
- return left;
+ return StringValue(left);
}
}
-char* LogicalOrFn(const char* name, State* state,
- int argc, Expr* argv[]) {
+Value* LogicalOrFn(const char* name, State* state,
+ int argc, Expr* argv[]) {
char* left = Evaluate(state, argv[0]);
if (left == NULL) return NULL;
if (BooleanString(left) == false) {
free(left);
- return Evaluate(state, argv[1]);
+ return EvaluateValue(state, argv[1]);
} else {
- return left;
+ return StringValue(left);
}
}
-char* LogicalNotFn(const char* name, State* state,
- int argc, Expr* argv[]) {
+Value* LogicalNotFn(const char* name, State* state,
+ int argc, Expr* argv[]) {
char* val = Evaluate(state, argv[0]);
if (val == NULL) return NULL;
bool bv = BooleanString(val);
free(val);
- if (bv) {
- return strdup("");
- } else {
- return strdup("t");
- }
+ return StringValue(strdup(bv ? "" : "t"));
}
-char* SubstringFn(const char* name, State* state,
- int argc, Expr* argv[]) {
+Value* SubstringFn(const char* name, State* state,
+ int argc, Expr* argv[]) {
char* needle = Evaluate(state, argv[0]);
if (needle == NULL) return NULL;
char* haystack = Evaluate(state, argv[1]);
@@ -207,10 +230,10 @@ char* SubstringFn(const char* name, State* state,
char* result = strdup(strstr(haystack, needle) ? "t" : "");
free(needle);
free(haystack);
- return result;
+ return StringValue(result);
}
-char* EqualityFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* EqualityFn(const char* name, State* state, int argc, Expr* argv[]) {
char* left = Evaluate(state, argv[0]);
if (left == NULL) return NULL;
char* right = Evaluate(state, argv[1]);
@@ -222,10 +245,10 @@ char* EqualityFn(const char* name, State* state, int argc, Expr* argv[]) {
char* result = strdup(strcmp(left, right) == 0 ? "t" : "");
free(left);
free(right);
- return result;
+ return StringValue(result);
}
-char* InequalityFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* InequalityFn(const char* name, State* state, int argc, Expr* argv[]) {
char* left = Evaluate(state, argv[0]);
if (left == NULL) return NULL;
char* right = Evaluate(state, argv[1]);
@@ -237,17 +260,17 @@ char* InequalityFn(const char* name, State* state, int argc, Expr* argv[]) {
char* result = strdup(strcmp(left, right) != 0 ? "t" : "");
free(left);
free(right);
- return result;
+ return StringValue(result);
}
-char* SequenceFn(const char* name, State* state, int argc, Expr* argv[]) {
- char* left = Evaluate(state, argv[0]);
+Value* SequenceFn(const char* name, State* state, int argc, Expr* argv[]) {
+ Value* left = EvaluateValue(state, argv[0]);
if (left == NULL) return NULL;
- free(left);
- return Evaluate(state, argv[1]);
+ FreeValue(left);
+ return EvaluateValue(state, argv[1]);
}
-char* LessThanIntFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* LessThanIntFn(const char* name, State* state, int argc, Expr* argv[]) {
if (argc != 2) {
free(state->errmsg);
state->errmsg = strdup("less_than_int expects 2 arguments");
@@ -278,10 +301,11 @@ char* LessThanIntFn(const char* name, State* state, int argc, Expr* argv[]) {
done:
free(left);
free(right);
- return strdup(result ? "t" : "");
+ return StringValue(strdup(result ? "t" : ""));
}
-char* GreaterThanIntFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* GreaterThanIntFn(const char* name, State* state,
+ int argc, Expr* argv[]) {
if (argc != 2) {
free(state->errmsg);
state->errmsg = strdup("greater_than_int expects 2 arguments");
@@ -295,8 +319,8 @@ char* GreaterThanIntFn(const char* name, State* state, int argc, Expr* argv[]) {
return LessThanIntFn(name, state, 2, temp);
}
-char* Literal(const char* name, State* state, int argc, Expr* argv[]) {
- return strdup(name);
+Value* Literal(const char* name, State* state, int argc, Expr* argv[]) {
+ return StringValue(strdup(name));
}
Expr* Build(Function fn, YYLTYPE loc, int count, ...) {
@@ -400,6 +424,32 @@ int ReadArgs(State* state, Expr* argv[], int count, ...) {
return 0;
}
+// Evaluate the expressions in argv, giving 'count' Value* (the ... is
+// zero or more Value** to put them in). If any expression evaluates
+// to NULL, free the rest and return -1. Return 0 on success.
+int ReadValueArgs(State* state, Expr* argv[], int count, ...) {
+ Value** args = malloc(count * sizeof(Value*));
+ va_list v;
+ va_start(v, count);
+ int i;
+ for (i = 0; i < count; ++i) {
+ args[i] = EvaluateValue(state, argv[i]);
+ if (args[i] == NULL) {
+ va_end(v);
+ int j;
+ for (j = 0; j < i; ++j) {
+ FreeValue(args[j]);
+ }
+ free(args);
+ return -1;
+ }
+ *(va_arg(v, Value**)) = args[i];
+ }
+ va_end(v);
+ free(args);
+ return 0;
+}
+
// Evaluate the expressions in argv, returning an array of char*
// results. If any evaluate to NULL, free the rest and return NULL.
// The caller is responsible for freeing the returned array and the
@@ -421,9 +471,30 @@ char** ReadVarArgs(State* state, int argc, Expr* argv[]) {
return args;
}
+// Evaluate the expressions in argv, returning an array of Value*
+// results. If any evaluate to NULL, free the rest and return NULL.
+// The caller is responsible for freeing the returned array and the
+// Values it contains.
+Value** ReadValueVarArgs(State* state, int argc, Expr* argv[]) {
+ Value** args = (Value**)malloc(argc * sizeof(Value*));
+ int i = 0;
+ for (i = 0; i < argc; ++i) {
+ args[i] = EvaluateValue(state, argv[i]);
+ if (args[i] == NULL) {
+ int j;
+ for (j = 0; j < i; ++j) {
+ FreeValue(args[j]);
+ }
+ free(args);
+ return NULL;
+ }
+ }
+ return args;
+}
+
// Use printf-style arguments to compose an error message to put into
// *state. Returns NULL.
-char* ErrorAbort(State* state, char* format, ...) {
+Value* ErrorAbort(State* state, char* format, ...) {
char* buffer = malloc(4096);
va_list v;
va_start(v, format);
diff --git a/edify/expr.h b/edify/expr.h
index d2e739201..1462531b0 100644
--- a/edify/expr.h
+++ b/edify/expr.h
@@ -39,8 +39,17 @@ typedef struct {
char* errmsg;
} State;
-typedef char* (*Function)(const char* name, State* state,
- int argc, Expr* argv[]);
+#define VAL_STRING 1 // data will be NULL-terminated; size doesn't count null
+#define VAL_BLOB 2
+
+typedef struct {
+ int type;
+ ssize_t size;
+ char* data;
+} Value;
+
+typedef Value* (*Function)(const char* name, State* state,
+ int argc, Expr* argv[]);
struct Expr {
Function fn;
@@ -50,31 +59,41 @@ struct Expr {
int start, end;
};
+// Take one of the Expr*s passed to the function as an argument,
+// evaluate it, return the resulting Value. The caller takes
+// ownership of the returned Value.
+Value* EvaluateValue(State* state, Expr* expr);
+
+// Take one of the Expr*s passed to the function as an argument,
+// evaluate it, assert that it is a string, and return the resulting
+// char*. The caller takes ownership of the returned char*. This is
+// a convenience function for older functions that want to deal only
+// with strings.
char* Evaluate(State* state, Expr* expr);
// Glue to make an Expr out of a literal.
-char* Literal(const char* name, State* state, int argc, Expr* argv[]);
+Value* Literal(const char* name, State* state, int argc, Expr* argv[]);
// Functions corresponding to various syntactic sugar operators.
// ("concat" is also available as a builtin function, to concatenate
// more than two strings.)
-char* ConcatFn(const char* name, State* state, int argc, Expr* argv[]);
-char* LogicalAndFn(const char* name, State* state, int argc, Expr* argv[]);
-char* LogicalOrFn(const char* name, State* state, int argc, Expr* argv[]);
-char* LogicalNotFn(const char* name, State* state, int argc, Expr* argv[]);
-char* SubstringFn(const char* name, State* state, int argc, Expr* argv[]);
-char* EqualityFn(const char* name, State* state, int argc, Expr* argv[]);
-char* InequalityFn(const char* name, State* state, int argc, Expr* argv[]);
-char* SequenceFn(const char* name, State* state, int argc, Expr* argv[]);
+Value* ConcatFn(const char* name, State* state, int argc, Expr* argv[]);
+Value* LogicalAndFn(const char* name, State* state, int argc, Expr* argv[]);
+Value* LogicalOrFn(const char* name, State* state, int argc, Expr* argv[]);
+Value* LogicalNotFn(const char* name, State* state, int argc, Expr* argv[]);
+Value* SubstringFn(const char* name, State* state, int argc, Expr* argv[]);
+Value* EqualityFn(const char* name, State* state, int argc, Expr* argv[]);
+Value* InequalityFn(const char* name, State* state, int argc, Expr* argv[]);
+Value* SequenceFn(const char* name, State* state, int argc, Expr* argv[]);
// Convenience function for building expressions with a fixed number
// of arguments.
Expr* Build(Function fn, YYLTYPE loc, int count, ...);
// Global builtins, registered by RegisterBuiltins().
-char* IfElseFn(const char* name, State* state, int argc, Expr* argv[]);
-char* AssertFn(const char* name, State* state, int argc, Expr* argv[]);
-char* AbortFn(const char* name, State* state, int argc, Expr* argv[]);
+Value* IfElseFn(const char* name, State* state, int argc, Expr* argv[]);
+Value* AssertFn(const char* name, State* state, int argc, Expr* argv[]);
+Value* AbortFn(const char* name, State* state, int argc, Expr* argv[]);
// For setting and getting the global error string (when returning
@@ -112,15 +131,31 @@ Function FindFunction(const char* name);
// to NULL, free the rest and return -1. Return 0 on success.
int ReadArgs(State* state, Expr* argv[], int count, ...);
+// Evaluate the expressions in argv, giving 'count' Value* (the ... is
+// zero or more Value** to put them in). If any expression evaluates
+// to NULL, free the rest and return -1. Return 0 on success.
+int ReadValueArgs(State* state, Expr* argv[], int count, ...);
+
// Evaluate the expressions in argv, returning an array of char*
// results. If any evaluate to NULL, free the rest and return NULL.
// The caller is responsible for freeing the returned array and the
// strings it contains.
char** ReadVarArgs(State* state, int argc, Expr* argv[]);
+// Evaluate the expressions in argv, returning an array of Value*
+// results. If any evaluate to NULL, free the rest and return NULL.
+// The caller is responsible for freeing the returned array and the
+// Values it contains.
+Value** ReadValueVarArgs(State* state, int argc, Expr* argv[]);
+
// Use printf-style arguments to compose an error message to put into
// *state. Returns NULL.
-char* ErrorAbort(State* state, char* format, ...);
+Value* ErrorAbort(State* state, char* format, ...);
+
+// Wrap a string into a Value, taking ownership of the string.
+Value* StringValue(char* str);
+// Free a Value object.
+void FreeValue(Value* v);
#endif // _EXPRESSION_H
diff --git a/updater/install.c b/updater/install.c
index 852b393ea..2ffb3842f 100644
--- a/updater/install.c
+++ b/updater/install.c
@@ -29,17 +29,18 @@
#include "cutils/misc.h"
#include "cutils/properties.h"
#include "edify/expr.h"
+#include "mincrypt/sha.h"
#include "minzip/DirUtil.h"
#include "mtdutils/mounts.h"
#include "mtdutils/mtdutils.h"
#include "updater.h"
-
+#include "applypatch/applypatch.h"
// mount(type, location, mount_point)
//
// what: type="MTD" location="<partition>" to mount a yaffs2 filesystem
// type="vfat" location="/dev/block/<whatever>" to mount a device
-char* MountFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* MountFn(const char* name, State* state, int argc, Expr* argv[]) {
char* result = NULL;
if (argc != 3) {
return ErrorAbort(state, "%s() expects 3 args, got %d", name, argc);
@@ -98,12 +99,12 @@ done:
free(type);
free(location);
if (result != mount_point) free(mount_point);
- return result;
+ return StringValue(result);
}
// is_mounted(mount_point)
-char* IsMountedFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* IsMountedFn(const char* name, State* state, int argc, Expr* argv[]) {
char* result = NULL;
if (argc != 1) {
return ErrorAbort(state, "%s() expects 1 arg, got %d", name, argc);
@@ -127,11 +128,11 @@ char* IsMountedFn(const char* name, State* state, int argc, Expr* argv[]) {
done:
if (result != mount_point) free(mount_point);
- return result;
+ return StringValue(result);
}
-char* UnmountFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* UnmountFn(const char* name, State* state, int argc, Expr* argv[]) {
char* result = NULL;
if (argc != 1) {
return ErrorAbort(state, "%s() expects 1 arg, got %d", name, argc);
@@ -157,14 +158,14 @@ char* UnmountFn(const char* name, State* state, int argc, Expr* argv[]) {
done:
if (result != mount_point) free(mount_point);
- return result;
+ return StringValue(result);
}
// format(type, location)
//
// type="MTD" location=partition
-char* FormatFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* FormatFn(const char* name, State* state, int argc, Expr* argv[]) {
char* result = NULL;
if (argc != 2) {
return ErrorAbort(state, "%s() expects 2 args, got %d", name, argc);
@@ -218,11 +219,11 @@ char* FormatFn(const char* name, State* state, int argc, Expr* argv[]) {
done:
free(type);
if (result != location) free(location);
- return result;
+ return StringValue(result);
}
-char* DeleteFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* DeleteFn(const char* name, State* state, int argc, Expr* argv[]) {
char** paths = malloc(argc * sizeof(char*));
int i;
for (i = 0; i < argc; ++i) {
@@ -249,11 +250,11 @@ char* DeleteFn(const char* name, State* state, int argc, Expr* argv[]) {
char buffer[10];
sprintf(buffer, "%d", success);
- return strdup(buffer);
+ return StringValue(strdup(buffer));
}
-char* ShowProgressFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* ShowProgressFn(const char* name, State* state, int argc, Expr* argv[]) {
if (argc != 2) {
return ErrorAbort(state, "%s() expects 2 args, got %d", name, argc);
}
@@ -270,10 +271,10 @@ char* ShowProgressFn(const char* name, State* state, int argc, Expr* argv[]) {
fprintf(ui->cmd_pipe, "progress %f %d\n", frac, sec);
free(sec_str);
- return frac_str;
+ return StringValue(frac_str);
}
-char* SetProgressFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* SetProgressFn(const char* name, State* state, int argc, Expr* argv[]) {
if (argc != 1) {
return ErrorAbort(state, "%s() expects 1 arg, got %d", name, argc);
}
@@ -287,11 +288,11 @@ char* SetProgressFn(const char* name, State* state, int argc, Expr* argv[]) {
UpdaterInfo* ui = (UpdaterInfo*)(state->cookie);
fprintf(ui->cmd_pipe, "set_progress %f\n", frac);
- return frac_str;
+ return StringValue(frac_str);
}
// package_extract_dir(package_path, destination_path)
-char* PackageExtractDirFn(const char* name, State* state,
+Value* PackageExtractDirFn(const char* name, State* state,
int argc, Expr* argv[]) {
if (argc != 2) {
return ErrorAbort(state, "%s() expects 2 args, got %d", name, argc);
@@ -310,7 +311,7 @@ char* PackageExtractDirFn(const char* name, State* state,
NULL, NULL);
free(zip_path);
free(dest_path);
- return strdup(success ? "t" : "");
+ return StringValue(strdup(success ? "t" : ""));
}
@@ -318,9 +319,8 @@ char* PackageExtractDirFn(const char* name, State* state,
// or
// package_extract_file(package_path)
// to return the entire contents of the file as the result of this
-// function (the char* returned points to a long giving the length
-// followed by that many bytes of data).
-char* PackageExtractFileFn(const char* name, State* state,
+// function (the char* returned is actually a FileContents*).
+Value* PackageExtractFileFn(const char* name, State* state,
int argc, Expr* argv[]) {
if (argc != 1 && argc != 2) {
return ErrorAbort(state, "%s() expects 1 or 2 args, got %d",
@@ -353,13 +353,16 @@ char* PackageExtractFileFn(const char* name, State* state,
done2:
free(zip_path);
free(dest_path);
- return strdup(success ? "t" : "");
+ return StringValue(strdup(success ? "t" : ""));
} else {
// The one-argument version returns the contents of the file
// as the result.
char* zip_path;
- char* buffer = NULL;
+ Value* v = malloc(sizeof(Value));
+ v->type = VAL_BLOB;
+ v->size = -1;
+ v->data = NULL;
if (ReadArgs(state, argv, 1, &zip_path) < 0) return NULL;
@@ -370,33 +373,32 @@ char* PackageExtractFileFn(const char* name, State* state,
goto done1;
}
- long size = mzGetZipEntryUncompLen(entry);
- buffer = malloc(size + sizeof(long));
- if (buffer == NULL) {
+ v->size = mzGetZipEntryUncompLen(entry);
+ v->data = malloc(v->size);
+ if (v->data == NULL) {
fprintf(stderr, "%s: failed to allocate %ld bytes for %s\n",
- name, size+sizeof(long), zip_path);
+ name, (long)v->size, zip_path);
goto done1;
}
- *(long *)buffer = size;
- success = mzExtractZipEntryToBuffer(
- za, entry, (unsigned char *)(buffer + sizeof(long)));
+ success = mzExtractZipEntryToBuffer(za, entry,
+ (unsigned char *)v->data);
done1:
free(zip_path);
if (!success) {
- free(buffer);
- buffer = malloc(sizeof(long));
- *(long *)buffer = -1L;
+ free(v->data);
+ v->data = NULL;
+ v->size = -1;
}
- return buffer;
+ return v;
}
}
// symlink target src1 src2 ...
// unlinks any previously existing src1, src2, etc before creating symlinks.
-char* SymlinkFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* SymlinkFn(const char* name, State* state, int argc, Expr* argv[]) {
if (argc == 0) {
return ErrorAbort(state, "%s() expects 1+ args, got %d", name, argc);
}
@@ -425,11 +427,11 @@ char* SymlinkFn(const char* name, State* state, int argc, Expr* argv[]) {
free(srcs[i]);
}
free(srcs);
- return strdup("");
+ return StringValue(strdup(""));
}
-char* SetPermFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* SetPermFn(const char* name, State* state, int argc, Expr* argv[]) {
char* result = NULL;
bool recursive = (strcmp(name, "set_perm_recursive") == 0);
@@ -499,11 +501,11 @@ done:
}
free(args);
- return result;
+ return StringValue(result);
}
-char* GetPropFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* GetPropFn(const char* name, State* state, int argc, Expr* argv[]) {
if (argc != 1) {
return ErrorAbort(state, "%s() expects 1 arg, got %d", name, argc);
}
@@ -515,7 +517,7 @@ char* GetPropFn(const char* name, State* state, int argc, Expr* argv[]) {
property_get(key, value, "");
free(key);
- return strdup(value);
+ return StringValue(strdup(value));
}
@@ -524,7 +526,7 @@ char* GetPropFn(const char* name, State* state, int argc, Expr* argv[]) {
// interprets 'file' as a getprop-style file (key=value pairs, one
// per line, # comment lines and blank lines okay), and returns the value
// for 'key' (or "" if it isn't defined).
-char* FileGetPropFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* FileGetPropFn(const char* name, State* state, int argc, Expr* argv[]) {
char* result = NULL;
char* buffer = NULL;
char* filename;
@@ -614,7 +616,7 @@ char* FileGetPropFn(const char* name, State* state, int argc, Expr* argv[]) {
free(filename);
free(key);
free(buffer);
- return result;
+ return StringValue(result);
}
@@ -627,7 +629,7 @@ static bool write_raw_image_cb(const unsigned char* data,
}
// write_raw_image(file, partition)
-char* WriteRawImageFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* WriteRawImageFn(const char* name, State* state, int argc, Expr* argv[]) {
char* result = NULL;
char* partition;
@@ -700,15 +702,13 @@ char* WriteRawImageFn(const char* name, State* state, int argc, Expr* argv[]) {
done:
if (result != partition) free(partition);
free(filename);
- return result;
+ return StringValue(result);
}
-extern int applypatch(int argc, char** argv);
-
// apply_patch(srcfile, tgtfile, tgtsha1, tgtsize, sha1:patch, ...)
// apply_patch_check(file, sha1, ...)
// apply_patch_space(bytes)
-char* ApplyPatchFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* ApplyPatchFn(const char* name, State* state, int argc, Expr* argv[]) {
printf("in applypatchfn (%s)\n", name);
char* prepend = NULL;
@@ -747,13 +747,13 @@ char* ApplyPatchFn(const char* name, State* state, int argc, Expr* argv[]) {
free(args);
switch (result) {
- case 0: return strdup("t");
- case 1: return strdup("");
+ case 0: return StringValue(strdup("t"));
+ case 1: return StringValue(strdup(""));
default: return ErrorAbort(state, "applypatch couldn't parse args");
}
}
-char* UIPrintFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* UIPrintFn(const char* name, State* state, int argc, Expr* argv[]) {
char** args = ReadVarArgs(state, argc, argv);
if (args == NULL) {
return NULL;
@@ -782,10 +782,10 @@ char* UIPrintFn(const char* name, State* state, int argc, Expr* argv[]) {
}
fprintf(((UpdaterInfo*)(state->cookie))->cmd_pipe, "ui_print\n");
- return buffer;
+ return StringValue(buffer);
}
-char* RunProgramFn(const char* name, State* state, int argc, Expr* argv[]) {
+Value* RunProgramFn(const char* name, State* state, int argc, Expr* argv[]) {
if (argc < 1) {
return ErrorAbort(state, "%s() expects at least 1 arg", name);
}
@@ -828,9 +828,138 @@ char* RunProgramFn(const char* name, State* state, int argc, Expr* argv[]) {
char buffer[20];
sprintf(buffer, "%d", status);
- return strdup(buffer);
+ return StringValue(strdup(buffer));
}
+// Take a string 'str' of 40 hex digits and parse it into the 20
+// byte array 'digest'. 'str' may contain only the digest or be of
+// the form "<digest>:<anything>". Return 0 on success, -1 on any
+// error.
+static int ParseSha1(const char* str, uint8_t* digest) {
+ int i;
+ const char* ps = str;
+ uint8_t* pd = digest;
+ for (i = 0; i < SHA_DIGEST_SIZE * 2; ++i, ++ps) {
+ int digit;
+ if (*ps >= '0' && *ps <= '9') {
+ digit = *ps - '0';
+ } else if (*ps >= 'a' && *ps <= 'f') {
+ digit = *ps - 'a' + 10;
+ } else if (*ps >= 'A' && *ps <= 'F') {
+ digit = *ps - 'A' + 10;
+ } else {
+ return -1;
+ }
+ if (i % 2 == 0) {
+ *pd = digit << 4;
+ } else {
+ *pd |= digit;
+ ++pd;
+ }
+ }
+ if (*ps != '\0') return -1;
+ return 0;
+}
+
+// Take a sha-1 digest and return it as a newly-allocated hex string.
+static char* PrintSha1(uint8_t* digest) {
+ char* buffer = malloc(SHA_DIGEST_SIZE*2 + 1);
+ int i;
+ const char* alphabet = "0123456789abcdef";
+ for (i = 0; i < SHA_DIGEST_SIZE; ++i) {
+ buffer[i*2] = alphabet[(digest[i] >> 4) & 0xf];
+ buffer[i*2+1] = alphabet[digest[i] & 0xf];
+ }
+ buffer[i*2] = '\0';
+ return buffer;
+}
+
+// sha1_check(data)
+// to return the sha1 of the data (given in the format returned by
+// read_file).
+//
+// sha1_check(data, sha1_hex, [sha1_hex, ...])
+// returns the sha1 of the file if it matches any of the hex
+// strings passed, or "" if it does not equal any of them.
+//
+Value* Sha1CheckFn(const char* name, State* state, int argc, Expr* argv[]) {
+ if (argc < 1) {
+ return ErrorAbort(state, "%s() expects at least 1 arg", name);
+ }
+
+ Value** args = ReadValueVarArgs(state, argc, argv);
+ if (args == NULL) {
+ return NULL;
+ }
+
+ if (args[0]->size < 0) {
+ fprintf(stderr, "%s(): no file contents received", name);
+ return StringValue(strdup(""));
+ }
+ uint8_t digest[SHA_DIGEST_SIZE];
+ SHA(args[0]->data, args[0]->size, digest);
+ FreeValue(args[0]);
+
+ if (argc == 1) {
+ return StringValue(PrintSha1(digest));
+ }
+
+ int i;
+ uint8_t* arg_digest = malloc(SHA_DIGEST_SIZE);
+ for (i = 1; i < argc; ++i) {
+ if (args[i]->type != VAL_STRING) {
+ fprintf(stderr, "%s(): arg %d is not a string; skipping",
+ name, i);
+ } else if (ParseSha1(args[i]->data, arg_digest) != 0) {
+ // Warn about bad args and skip them.
+ fprintf(stderr, "%s(): error parsing \"%s\" as sha-1; skipping",
+ name, args[i]->data);
+ } else if (memcmp(digest, arg_digest, SHA_DIGEST_SIZE) == 0) {
+ break;
+ }
+ FreeValue(args[i]);
+ }
+ if (i >= argc) {
+ // Didn't match any of the hex strings; return false.
+ return StringValue(strdup(""));
+ }
+ // Found a match; free all the remaining arguments and return the
+ // matched one.
+ int j;
+ for (j = i+1; j < argc; ++j) {
+ FreeValue(args[j]);
+ }
+ return args[i];
+}
+
+// Read a local file and return its contents (the char* returned
+// is actually a FileContents*).
+Value* ReadFileFn(const char* name, State* state, int argc, Expr* argv[]) {
+ if (argc != 1) {
+ return ErrorAbort(state, "%s() expects 1 arg, got %d", name, argc);
+ }
+ char* filename;
+ if (ReadArgs(state, argv, 1, &filename) < 0) return NULL;
+
+ Value* v = malloc(sizeof(Value));
+ v->type = VAL_BLOB;
+
+ FileContents fc;
+ if (LoadFileContents(filename, &fc) != 0) {
+ ErrorAbort(state, "%s() loading \"%s\" failed: %s",
+ name, filename, strerror(errno));
+ free(filename);
+ free(v);
+ free(fc.data);
+ return NULL;
+ }
+
+ v->size = fc.size;
+ v->data = (char*)fc.data;
+
+ free(filename);
+ return v;
+}
void RegisterInstallFunctions() {
RegisterFunction("mount", MountFn);
@@ -855,6 +984,9 @@ void RegisterInstallFunctions() {
RegisterFunction("apply_patch_check", ApplyPatchFn);
RegisterFunction("apply_patch_space", ApplyPatchFn);
+ RegisterFunction("read_file", ReadFileFn);
+ RegisterFunction("sha1_check", Sha1CheckFn);
+
RegisterFunction("ui_print", UIPrintFn);
RegisterFunction("run_program", RunProgramFn);
diff --git a/updater/updater.c b/updater/updater.c
index 2d16deeba..6537a94ba 100644
--- a/updater/updater.c
+++ b/updater/updater.c
@@ -33,6 +33,12 @@
#define SCRIPT_NAME "META-INF/com/google/android/updater-script"
int main(int argc, char** argv) {
+ // Various things log information to stdout or stderr more or less
+ // at random. The log file makes more sense if buffering is
+ // turned off so things appear in the right order.
+ setbuf(stdout, NULL);
+ setbuf(stderr, NULL);
+
if (argc != 4) {
fprintf(stderr, "unexpected number of arguments (%d)\n", argc);
return 1;