summaryrefslogtreecommitdiffstats
path: root/Android.mk (unfollow)
Commit message (Collapse)AuthorFilesLines
2021-12-03Add erofs tools in recovery modeDaeho Jeong1-0/+5
Bug: 201685920 Test: mm fsck.erofs Signed-off-by: Daeho Jeong <daehojeong@google.com> Change-Id: Ie9a4dcd28c4b6348f34859a9b4989ef1f29f787f
2021-10-13Add fsck.f2fs to recovery modeRandall Huang1-0/+1
Bug: 202789846 Test: run factory data reset Change-Id: Ief1fd480ac4c1aaaa3db85d153832e5311bf07e6 Signed-off-by: Randall Huang <huangrandall@google.com>
2021-06-30Use recovery variant for librecovery_ui_extInseob Kim1-2/+2
It's installed to recovery, so it should use recovery variants. Bug: 192312249 Test: boot and enter recovery mode Change-Id: I99eafa756ba071e37c7ee60a8da210385378710b
2021-02-14[LSC] Add LOCAL_LICENSE_KINDS to bootable/recoveryBob Badour1-0/+6
Added SPDX-license-identifier-Apache-2.0 to: applypatch/Android.bp bootloader_message/Android.bp edify/Android.bp fuse_sideload/Android.bp install/Android.bp minadbd/Android.bp minui/Android.bp otautil/Android.bp recovery_ui/Android.bp recovery_utils/Android.bp tests/Android.bp tools/image_generator/Android.bp tools/recovery_l10n/Android.bp uncrypt/Android.bp update_verifier/Android.bp updater/Android.bp updater/Android.mk updater_sample/Android.bp updater_sample/tests/Android.bp Added SPDX-license-identifier-Apache-2.0 SPDX-license-identifier-MIT SPDX-license-identifier-OFL to: Android.bp Android.mk Bug: 68860345 Bug: 151177513 Bug: 151953481 Test: m all Exempt-From-Owner-Approval: janitorial work Change-Id: I3da761b525452838977297f773974000d4de7bd6
2020-05-19Add EthernetDevice to manage ethernet connection.Hongguang Chen1-3/+3
The current fastbootd only supports USB protocol. But some Android TV devices are built without USB port. The fastbootd cannot be used on those ATV devices due to it. aosp/1295566 enables fastbootd over ethernet. This change adds an EthernetDevice to manage ethernet connection and set fastbootd protcol property fastbootd.protocol to enable fastbootd over ethernet in recovery mode. It uses IPv6 link-local address to not expose the devices out of the network segment. The devices who want to use this EthernetDevice should add “TARGET_RECOVERY_UI_LIB := librecovery_ui_ethernet” into BoardConfig.mk. BUG: 152544169 BUG: 155198345 Test: Enter and exit fastboot mode and check eth0 IPv6 link-local address on screen UI. Change-Id: I73fe44be3790bdba5a6059fbba3f7264b21eed99 Merged-In: I73fe44be3790bdba5a6059fbba3f7264b21eed99
2020-05-16Add EthernetDevice to manage ethernet connection.Hongguang Chen1-3/+3
The current fastbootd only supports USB protocol. But some Android TV devices are built without USB port. The fastbootd cannot be used on those ATV devices due to it. aosp/1295566 enables fastbootd over ethernet. This change adds an EthernetDevice to manage ethernet connection and set fastbootd protcol property fastbootd.protocol to enable fastbootd over ethernet in recovery mode. It uses IPv6 link-local address to not expose the devices out of the network segment. The devices who want to use this EthernetDevice should add “TARGET_RECOVERY_UI_LIB := librecovery_ui_ethernet” into BoardConfig.mk. BUG: 152544169 Test: Enter and exit fastboot mode and check eth0 IPv6 link-local address on screen UI. Change-Id: I73fe44be3790bdba5a6059fbba3f7264b21eed99
2019-10-29recovery: Remove HOST_OS guard for f2fs toolsTom Marshall1-2/+0
These build correctly under MacOS. Change-Id: I00bf26fdcc4ed560111e5c0b8f649feec72579d8
2019-01-17e2fsck_static is no longer needed for remountHridya Valsaraju1-8/+0
Remount will instead use overlayfs. If the device is not configured to use overlayfs or if the device does not support dynamic partitions but has chosed to setup an ext4-dedupe filesystem, e2fsck_static must then be included in recovery. Bug: 122115286 Test: fastboot flashall Change-Id: I931282dbc67ff4ef53291bcbc5a078b500e5e807
2018-12-20Use dynamically linked f2fs executables.Tao Bao1-2/+2
It also reduces the space cost for devices using f2fs (e.g. crosshatch). /sbin/mkfs.f2fs 722560 => /system/bin/make_f2fs 49568 /sbin/sload.f2fs 1182456 => /system/bin/sload_f2fs 150032 Test: Build and boot recovery on crosshatch. Factory reset. Test: Install a non-A/B OTA package that formats a f2fs partition. Change-Id: Ibe70c8d91a1d07e1c78ff9eac19b1f7955800161
2018-09-13Move the parse of last_install to recovery-persistTianjie Xu1-3/+6
The recovery-persist used to look for the related recovery logs in persist storage, and copy them under /data/misc/recovery during the normal boot process. As we also want to find out the sideload information from last_install, it makes more sense to move the parse & report of non-a/b metrics to recovery-persist. Thus we can avoid the race condition of the file system between the native code and RecoverySystem. Bug: 114278989 Test: unit test pass, check the event buffer for metrics report Change-Id: I32d7b2b831bc74a61a70af9a2f0b8a7e9b3e36ee
2018-08-15tests: Move to Android.bp.Tao Bao1-1/+0
Also separate libupdater_defaults out to be shareable. It turns out the `data` property in `cc_test` doesn't follow symlinks as LOCAL_TEST_DATA does in Android.mk. This CL creates a filegroup in top-level Android.bp in order to pick up the testdata for ResourcesTest. Test: `mmma -j bootable/recovery` with aosp_marlin-userdebug Test: Run recovery_{unit,component,manual}_test on marlin. Test: Run recovery_host_test. Change-Id: I4532ab25aeb83c0b0baa8051d5fe34ba7b910a35
2018-08-13updater: Move libupdater to Soong.Tao Bao1-1/+1
Test: mmma -j bootable/recovery Test: Run recovery_unit_test and recovery_component_test on marlin. Change-Id: I2617b87d13c585addf0ed2fbae8c3ce443ea7200
2018-08-10Build `recovery` with Soong.Tao Bao1-188/+6
Fixes: 110380063 Test: `mmma -j bootable/recovery` with aosp_taimen-userdebug Test: Build and boot into recovery on taimen. Check the basic functionalities (`Apply update from ADB`, `View recovery logs`, `Run graphics test`). Test: Run recovery_unit_test and recovery_component_test on marlin. Test: Modify `recovery.cpp` locally to trigger the call to is_battery_ok(). Check that the battery info is reported correctly. Test: `build/soong/build_test.bash --dist` Change-Id: I391eb201d57c760e457ba2bf2410ceb72596795c
2018-08-10updater_sample: Move to Soong.Tao Bao1-1/+0
Test: Follow the steps in "Running tests" in updater_sample/README.md. Change-Id: I70c3239e3daea0dcdadf02f68abe7d6aafa67a2e
2018-08-10Build boot control HAL with Android.bpHridya Valsaraju1-1/+0
Bug: 78793464 Test: make Change-Id: Id5efceda0f5e93bbaf33c2dc3e203fd39ef44e28
2018-08-08`recovery` uses more shared libraries.Tao Bao1-12/+31
Bug: 110380063 Test: `m -j installclean && mmma -j bootable/recovery` with aosp_taimen-userdebug Test: Build (`m -j bootimage`) and boot into recovery. Check that `adb sideload` and `Run graphics test` both work. Test: Run recovery_unit_test and recovery_component_test on marlin. Change-Id: Ie6ed0e7cafa352d5faff9d1b6ccef724a0415e65
2018-08-08Revert "Build and use minadbd as a shared library."Tao Bao1-6/+1
This reverts commit 4fd4f89591fe826cf26167bccaeb2802f14fbdc8. The reverted CL has a side effect that unintentionally installs a copy of libminadbd_services.so to the system image. This breaks the check with `build/soong/build_test.bash --dist` which detects and prevents vendor modules from installing files to the system image. Prior to fully converting `recovery` to be built with Soong, we have to statically link recovery-specific modules into `recovery`. Bug: 110380063 Test: `m -j bootimage` with aosp_marlin-userdebug Test: Run minadbd_test on marlin. Test: Boot into recovery and verify that sideloading still works. Test: `build/soong/build_test.bash --dist` Change-Id: I290d55c82e17aa60a5afdf2ff7f896afc4dae8b3
2018-08-07Build and use minadbd as a shared library.Tao Bao1-1/+6
The former `minadbd` module is now built as a shared library (`libminadbd_services.so`) that serves sideloading under recovery, with a dynamic dependency on `libadbd.so`. This allows sharing and reusing libadbd code on device (both of `adbd` and `recovery` now uses `libadbd.so`). As a result, it reduces the size of `recovery` binary from 1407360-byte to (1272880 + 33032)-byte (aosp_marlin-userdebug). Bug: 78793464 Test: `m -j bootimage` with aosp_marlin-userdebug Test: Run minadbd_test on marlin. Test: Boot into recovery and verify that sideloading still works. Change-Id: I6c2bc3d351d5af71220a9b9f956c8c039e52c781
2018-08-06Dynamically load device-specific recovery UI lib.Tao Bao1-6/+79
We used to statically link the device-specific recovery UI extension (`TARGET_RECOVERY_UI_LIB`) into `recovery`. Such a logic can't be easily migrated to Soong, as modules specified by `TARGET_RECOVERY_UI_LIB` may not be built with Soong. Instead of porting all the device-specific codes over, this CL builds and installs the UI lib as a shared library with Android.mk. `recovery` dlopen(3)'s and dlsym(3)'s `make_device` to invoke the device-specific UI lib on start. Note that in order to make dlopen(3) actually working, we have to switch `recovery` to be dynamically linked (we will make the move later anyway). Bug: 110380063 Test: Build and boot into marlin recovery image. Check that device-specific recovery UI is successfully loaded. Change-Id: Ia9861c7559a95f3f50676534540c0cb87cae4574
2018-08-05minui: Move to Soong.Tao Bao1-1/+0
Note that although libminui says "shared_libs" in Android.bp file, `recovery` binary will still statically link the libs, until we drop the `LOCAL_FORCE_STATIC_EXECUTABLE := true` flag from `recovery` module. Bug: 110380063 Test: `mmma -j bootable/recovery` with aosp_taimen-userdebug Test: Boot into recovery and `Run graphics test`. Change-Id: I48785d161dfe52eb01667e938d9c3f0a497b61a2
2018-08-01ui: Read custom recovery UI values via system property.Tao Bao1-48/+0
The matching change to build system now writes these values as build properties for recovery image. This allows us dropping the dependency on Android.mk (as well as having more flexibility to do UI customization). Also rename a few constant names, as the naming doesn't fully follow the style guide (which reads "whose value is fixed for the duration of the program"). Bug: 110380063 Test: Build and flash recovery image on taimen, which uses custom margin height. Check the UI and choose `Run graphics test`. Change-Id: I2c50326123639cb36022f51b62cdeed925d77ba7
2018-07-27Move recovery from /sbin to /system/binHridya Valsaraju1-1/+1
Executables should be in /system/bin rather than sbin. Bug: 78793464 Test: boot into recovery, try adb sideload Change-Id: I194589119a099d29e56b0648f0906a5ae2aa6770
2018-07-23Revert "Make recovery libraries shared / recovery_available"Hridya Valsaraju1-7/+0
This reverts commit c936a6961940a15f7f95befcf35425bad8fa4f7c. Reason for revert: b/111734137 Change-Id: Ie9c1fdc75d6e87dba7019c4e6d1799af25c2f94a
2018-07-20Make recovery libraries shared / recovery_availableJerry Zhang1-0/+7
Test: compiles Bug: 78793464 Change-Id: Iff64bc1a597e70f749a9d825f7d386baa427be3d Merged-In: Iff64bc1a597e70f749a9d825f7d386baa427be3d (cherry picked from commit 92969c49dce519803ed0a1986781c474b1bbc82f)
2018-07-20Make recovery libraries shared / recovery_availableJerry Zhang1-0/+7
Test: compiles Bug: 78793464 Change-Id: Iff64bc1a597e70f749a9d825f7d386baa427be3d
2018-06-20e2fsdroid and mke2fs are dynamic executable in recovery partitionJiyong Park1-2/+2
The two utilities are now converted to dynamic executables as shared libraries are supported in recovery mode. As part of the conversion, their location has moved from /sbin to /system/bin. Reflect the change in the program 'recovery' Bug: 79146551 Test: adb reboot recovery, and select 'Wipe data/factory reset'. The data partition is formatted and there is no selinux denial. Change-Id: Ie7cfc4c50ab1e6767e4a5170533ccf826ec7d7f3
2018-06-19Drop the dependency on AB_OTA_UPDATER flag.Tao Bao1-4/+0
This shortens the gap between A/B and non-A/B builds, by replacing the dependency on build-time flag with runtime detection instead. It also allows building and testing both paths regardless of the target OTA type. The size increase to /sbin/recovery looks negligible (< 0.01%). - marlin: increased from 2084928 to 2085024; - angler: increased from 2084776 to 2084896. Test: Run recovery_component_test on angler and marlin. Test: Sideload an A/B OTA package on marlin. Test: Sideload a non-A/B OTA package on angler. Change-Id: I1d927d1ede9713fb42f73b4fe324aa5705ee6f99
2018-05-30recovery: add --fsck_unshare_blocks option for adb remountDavid Anderson1-0/+8
Allow "adb remount" on deduplicated filesystems to reboot into recovery and run e2fsck to undo deduplication. The e2fsck binary is copied from the system partition into tmpfs, and the system partition is unmounted so e2fsck can run safely. Bug: 64109868 Test: recovery with --fsck_unshare_blocks; adb remount Change-Id: I7558749b018b58f3c4339e51a95831dbd5be1ae3
2018-05-17tools: Move to Soong.Tao Bao1-1/+0
Test: `mmma -j bootable/recovery/` Test: Build and run RecoveryLocalizer on device. Change-Id: I3359223c82bd670c94ad51296cb8b357b04f5349
2018-05-17Move stuff from recovery into librecovery.Tao Bao1-42/+39
Move most source files into librecovery so they become testable. Only recovery_main.cpp and logging.cpp are built into recovery module, as they perform one-time setup (e.g. setting up logger). Test: `mmma -j bootable/recovery` with aosp_{angler,bullhead,fugu,dragon,marlin}-userdebug Test: recovery_host_test; recovery_unit_test; recovery_component_test; recovery_manual_test Test: Build and boot into recovery image on angler. Change-Id: Ic4444f87a2f123557c71085f81dc2b2764c05ed8 Merged-In: Ic4444f87a2f123557c71085f81dc2b2764c05ed8
2018-05-17Move stuff from recovery into librecovery.Tao Bao1-55/+52
Move most source files into librecovery so they become testable. Only recovery_main.cpp and logging.cpp are built into recovery module, as they perform one-time setup (e.g. setting up logger). Test: `mmma -j bootable/recovery` with aosp_{angler,bullhead,fugu,dragon,marlin}-userdebug Test: recovery_host_test; recovery_unit_test; recovery_component_test; recovery_manual_test Test: Build and boot into recovery image on angler. Change-Id: Ic4444f87a2f123557c71085f81dc2b2764c05ed8 (cherry picked from commit bf4c006d7bc8a4517c82399bbffd9cb09971c0b4)
2018-05-12Clean up the Makefile for recovery and tests.Tao Bao1-44/+51
Reorder librecovery and librecovery_ui, so that librecovery stays closer to recovery (in preparation for later changes that move more files between the two). For the libraries in LOCAL_STATIC_LIBRARIES, reorder them based on the dependency - local modules coming first, with external libraries near the end. Sort the local / external modules, unless a specific order is needed. In tests/Android.mk, split the monolithic list of LOCAL_STATIC_LIBRARIES based on modules. This makes adding / finding libraries easier. There's no functionality in this CL. Test: mmma -j bootable/recovery Change-Id: I6836be574df565001ae9cd3d466a2b6460d90d08
2018-05-11Move device.cpp into librecovery_ui.Tao Bao1-7/+10
librecovery_ui will be exposed for device-specific RecoveryUI. With the current code structure, 'device.h' and 'ui.h' will always be needed in order to implement device-specific RecoveryUI. Bug: 76436783 Test: lunch aosp_{angler,marlin,dragon,walleye}-userdebug; `mmma -j bootable/recovery` respectively. Change-Id: I15e8851b230a65526ac9310e0ee6621b7daea589
2018-05-11recovery: Configure device menu based on runtime info.Tao Bao1-4/+0
Drop the dependency on build time flag of AB_OTA_UPDATER when compiling device.cpp. Note that AB_OTA_UPDATER still guards the package install behavior (install.cpp). This can be extended to cover the entry of "Apply update from SD card". Test: Build and boot into recovery on angler and walleye respectively. Check the recovery menu. Change-Id: I36a6a6b4101ba61d4d374e32353c36cc5716f9ce
2018-05-09tests: Add tests for ScreenRecoveryUI.Tao Bao1-8/+8
In order to support that, this CL adds Paths::set_resource_dir() to override the default resource dir ("/res/images/") that's only available under recovery. Note that since there're external modules depending on libminui, it adds a separate function of res_set_resource_dir(), instead of requiring the dependency on libotautil for everyone. Test: mmma -j bootable/recovery Test: Run recovery_unit_test on marlin. Change-Id: I0a7dcf4476808bea9e634eaffc9676f6cbaf92b7
2018-05-07recovery: Refactor logging code into logging.cppJerry Zhang1-1/+1
Move common logging related functions to rotate_logs.cpp, and rename that to logging.cpp. Test: Recovery works Bug: 78793464 Merged-In: I00f20a79a296680122b8437d54a87897c5cb2fc7 Change-Id: I00f20a79a296680122b8437d54a87897c5cb2fc7
2018-05-07recovery: Refactor logging code into logging.cppJerry Zhang1-1/+1
Move common logging related functions to rotate_logs.cpp, and rename that to logging.cpp. Test: Recovery works Bug: 78793464 Change-Id: I00f20a79a296680122b8437d54a87897c5cb2fc7 (cherry picked from commit 3c3f211d1e5698da6eea9e83584acb2dee4ca46e)
2018-05-07recovery: Refactor logging code into logging.cppJerry Zhang1-1/+1
Move common logging related functions to rotate_logs.cpp, and rename that to logging.cpp. Test: Recovery works Bug: 78793464 Change-Id: I00f20a79a296680122b8437d54a87897c5cb2fc7
2018-05-04Move reboot() from common.h into otautil/sysutil.h.Tao Bao1-0/+1
This breaks the dependency on common.h (which belongs to recovery/librecovery) from librecovery_ui. reboot() is now owned by libotautil, which is expected to be a leaf node to be depended on. With the change, recovery and updater also share the same reboot() code now. Test: mmma -j bootable/recovery Change-Id: I1cc5d702cfe49302048db33d31c9c87ddc97ac71
2018-05-01recovery: Split main() into recovery_main.cpp.Tao Bao1-0/+1
This prepares for moving more codes from recovery into librecovery, so that they will become more easily testable. recovery_main.cpp will be the source code for recovery module, with the rest moved into librecovery. recovery_main.cpp mainly does the initializations, such as setting up the logger. Test: mmma -j bootable/recovery Test: recovery_component_test Test: Build and boot into recovery image on marlin. Change-Id: I8e846524546b6f3f0e32ed869e851f62261eef23 Merged-In: I8e846524546b6f3f0e32ed869e851f62261eef23
2018-05-01recovery: Split main() into recovery_main.cpp.Tao Bao1-0/+1
This prepares for moving more codes from recovery into librecovery, so that they will become more easily testable. recovery_main.cpp will be the source code for recovery module, with the rest moved into librecovery. recovery_main.cpp mainly does the initializations, such as setting up the logger. Test: mmma -j bootable/recovery Test: recovery_component_test Test: Build and boot into recovery image on marlin. Change-Id: I8e846524546b6f3f0e32ed869e851f62261eef23 (cherry picked from commit c241cb662440551eb0d2f42345f7ee08cf60a7dd)
2018-04-28Merge libmounts into libotautil.Tao Bao1-1/+0
Export its header (mounts.h) from there, and drop the dot dot dependency from libupdater / updater. Test: mmma bootable/recovery Test: recovery_component_test Change-Id: Ic26a6b9b78a34dbe1f178b138f3abaafffbec44c
2018-04-26Rename the dir for SystemUpdaterSample.Tao Bao1-1/+1
Also replace the occurrence in README.md and PREUPLOAD.cfg. Test: mmma -j bootable/recovery Change-Id: I04c0ef00dd64f49e008ad2a4a2c1e8eaed76bf8d
2018-04-20update_verifier: Move to Soong.Tao Bao1-1/+0
Test: mmma -j bootable/recovery Change-Id: I3a3574c89318304231c01f7633d32ece31df098c
2018-04-16Disable lld where it fails.Chih-Hung Hsieh1-0/+4
Bug: 77543887 Test: make checkbuild and boot Change-Id: I4134a8eec592dac347c84cc7dc3f9f99f27bc50c
2018-04-09Use the non-LTO, non-PGO version of libhwbinderPirama Arumuga Nainar1-1/+1
Bug: http://b/77320844 Android.mk doesn't have support for PGO either. This causes linker error (about missing __llvm_profile symbols) in the PGO-instrumentation enabled builds in the release branch. Test: m ANDROID_PGO_INSTRUMENT=ALL Change-Id: Ib5dfdea88073bd95da2cd02e92c85bfffcca80d6
2018-04-03Use non-LTO variant of libhwbinderYi Kong1-1/+1
... as a workaround for build system does not currently infer non-LTO usage from Android.mk. Test: m Bug: 77320844 Change-Id: I6e9954b895051cc20408a30d0761e164e4c5bfd9
2018-03-31Create folder for SystemUpdate sample app.Jiachen Zhao1-0/+1
Test: no functional changes. Change-Id: I2e8c654086ca49063c59ae0529e190323c84d6ad
2018-03-27Move a few modules to Soong.Tao Bao1-83/+2
libmounts librecovery_ui_default librecovery_ui_wear librecovery_ui_vr libverifier recovery-persist recovery-refresh They are all trivially converted. Test: mmma -j bootable/recovery Change-Id: Id783b3eec32bd15e74f42df17053732db5666675
2018-03-27Specify a default module for TARGET_RECOVERY_UI_LIB.Tao Bao1-12/+20
This aligns the logic between {default,wear,vr}_device.cpp. They all implement their default make_device() functions, but using different RecoveryUI variants. This CL creates a new module librecovery_ui_default that uses ScreenRecoveryUI, which serves as the default value for TARGET_RECOVERY_UI_LIB. Test: lunch aosp_{angler,marlin,dragon,walleye}-userdebug; `mmma -j bootable/recovery` respectively. Change-Id: I6755b09d96e4809bb1c17142895fe1cad95e5a02 Merged-In: I6755b09d96e4809bb1c17142895fe1cad95e5a02
2018-03-27Specify a default module for TARGET_RECOVERY_UI_LIB.Tao Bao1-11/+19
This aligns the logic between {default,wear,vr}_device.cpp. They all implement their default make_device() functions, but using different RecoveryUI variants. This CL creates a new module librecovery_ui_default that uses ScreenRecoveryUI, which serves as the default value for TARGET_RECOVERY_UI_LIB. Test: lunch aosp_{angler,marlin,dragon,walleye}-userdebug; `mmma -j bootable/recovery` respectively. Change-Id: I6755b09d96e4809bb1c17142895fe1cad95e5a02 (cherry picked from commit 73fd036be8c7563423be0c3adbd4205c4f1bc2f5)
2018-03-24Factor out a menu class for screen uiTianjie Xu1-30/+49
Also consolidate the duplicate codes to draw the menu in ScreenRecoveryUI and WearRecoveryUI. This helps us to support text icons as menu in the future. Bug: 74397117 Test: Check the menu under recovery on bullhead and a wear device. Change-Id: Iba9b646c3828670f0e78a7e07d1a94a44e96bb0b Merged-In: Iba9b646c3828670f0e78a7e07d1a94a44e96bb0b
2018-03-24Factor out a menu class for screen uiTianjie Xu1-29/+48
Also consolidate the duplicate codes to draw the menu in ScreenRecoveryUI and WearRecoveryUI. This helps us to support text icons as menu in the future. Bug: 74397117 Test: Check the menu under recovery on bullhead and a wear device. Change-Id: Iba9b646c3828670f0e78a7e07d1a94a44e96bb0b (cherry picked from commit 2b3f80068ece1040ba7c923afe1e70b705535ad5)
2018-03-23Factor out a menu class for screen uiTianjie Xu1-29/+48
Also consolidate the duplicate codes to draw the menu in ScreenRecoveryUI and WearRecoveryUI. This helps us to support text icons as menu in the future. Bug: 74397117 Test: Check the menu under recovery on bullhead and a wear device. Change-Id: Iba9b646c3828670f0e78a7e07d1a94a44e96bb0b (cherry picked from commit Iba9b646c3828670f0e78a7e07d1a94a44e96bb0b)
2018-03-13recovery: add libhidl-gen-utils depedencyYifan Hong1-0/+1
introduced as a depedency to libvintf. Test: builds Bug: 73556059 Change-Id: Ia51ba81ef462879481dcacb80d9ea9ea35e8b0bb Merged-In: Ia51ba81ef462879481dcacb80d9ea9ea35e8b0bb
2018-03-08recovery: add libhidl-gen-utils depedencyYifan Hong1-0/+1
introduced as a depedency to libvintf. Test: builds Bug: 73556059 Change-Id: Ia51ba81ef462879481dcacb80d9ea9ea35e8b0bb
2018-03-07Export fuse_sideload.h for libfusesideload.Tao Bao1-12/+0
Move the module into a separate directory so that we can export only the expected header. With this change, minadbd no longer needs to include bootable/recovery. Test: mmma -j bootable/recovery Change-Id: I69b888ceb160a33a67d79c5bda208dc17ad6ed86
2018-03-07minadbd: Move to Soong.Tao Bao1-1/+0
Test: mmma -j bootable/recovery Change-Id: Ic4cd676a842f0e8c4735cc6731fcbf13b844510c
2018-01-12Statically link with libhealthstoragedefaultHridya Valsaraju1-0/+1
This is to add empty implementations of Health HAL methods to report storage info. Bug: 68388678 Test: vts-tradefed run vts -m VtsHalHealthV2_0 Change-Id: I4f093903f485519e16f39384f5c96fcd031438ba
2017-12-05add sload.f2fs for recovery formatJaegeuk Kim1-1/+1
Change-Id: Iddfe54b2b36f2d531925cbe61c98dbfb4903c0d1 Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
2017-11-14is_battery_ok use health 2.0 HALYifan Hong1-2/+13
Test: call is_battery_ok in graphics test, and test manually Bug: 69268160 Bug: 63702641 Change-Id: Ifcf4d2e2cb459689c11fc5d1b880bb053aaae8ae
2017-11-09uncrypt: Move to Soong.Tao Bao1-1/+0
Test: mmma -j bootable/recovery Change-Id: I405f2a70f51904c02c49a287c23cbc115a4c5132
2017-11-03recovery: fix library dependencyJin Qian1-2/+2
After removing some deadcode from libext4_utils, libz is optimized out by linker. However, it's still required by libvintf. Moving libz down the list fixed the build. Bug: 64395169 Change-Id: I23ecd70c83af83a219faced59d8227dc3c4e43d5
2017-10-12Drop -Wno-unused-parameter.Tao Bao1-4/+2
The only one left is libedify. Will handle that in a separate CL. Test: mmma bootable/recovery Change-Id: I732a5f85229da90fd767bee2e46c5c95f529c396
2017-10-12applypatch: Move to Soong.Tao Bao1-1/+0
Test: mmma bootable/recovery Change-Id: Ie163aff1c4c2b3b15bb705825779ada6bc38ad67
2017-10-11Move rangeset.h and print_sha1.h into otautil.Tao Bao1-0/+1
Also drop the "bootable/recovery" path in LOCAL_C_INCLUDES from applypatch modules. Test: lunch aosp_{angler,bullhead,fugu,dragon,sailfish}-userdebug; mmma bootable/recovery Change-Id: Idd602a796894f971ee4f8fa3eafe36c42d9de986
2017-10-09edify: Export the header and move to Soong.Tao Bao1-1/+0
Also make matching changes to applypatch modules which include edify/expr.h. Test: mmma bootable/recovery Change-Id: Ia72be3caa010d7f56a70add2da345e631b306378
2017-10-03otautil: Export headers.Tao Bao1-0/+1
Test: mmma bootable/recovery Change-Id: Ic01b68e2a394d578fc9fc09da2dabe9061b98122
2017-09-29otafault: Move to soong.Tao Bao1-1/+0
Test: mmma bootable/recovery Change-Id: I5f2520ea457ba66743aa3aa1d5b3b488a93084a3
2017-08-29Turn on -Wall for recovery modulesTianjie Xu1-4/+6
Turn on -Wall for all modules. Also remove the obsolete file_cmp() in apply_patch test and now() in wear_ui. The only exception is lib_edify due to the unused functions in the intermediate cpp files generated from the lex files. It will be handled in a seperate CL. Bug: 64939312 Test: mma, unit tests pass Change-Id: Ic53f76b60b6401ab20db3d98130d674c08e3702f
2017-08-13wear_ui: Expose menu_unusable_rows via Makefile var.Tao Bao1-0/+6
This variable is useful on small screens (e.g. on watches) to handle long menus. We should have better way to handle this value smartly. Prior to that, expose the value to be overridable by using the generic wearable UI module (librecovery_ui_wear). Bug: 64307776 Test: Define the variable, build and boot into recovery image and check the UI menu. Change-Id: I5d7a6baa8bb4cc852bfcc2a7b3cc9686c1c8817e (cherry picked from commit eea3af3f911d36ac1a82a9fb95d24912cc07e3b1)
2017-08-13Allow customizing WearRecoveryUI via Makefile variables.Tao Bao1-1/+22
With the following Makefile variables, we can reduce the work of writing (copy/pasting) device-specific WearRecoveryUI classes. The list of Makefile variables (the ones useful for Wear devices): - TARGET_RECOVERY_UI_MARGIN_HEIGHT (default: 0) - TARGET_RECOVERY_UI_MARGIN_WIDTH (default: 0) Specify the margin space that we don't want to display texts. They replace the former outer_width and outer_height. - TARGET_RECOVERY_UI_TOUCH_LOW_THRESHOLD (default: 50) - TARGET_RECOVERY_UI_TOUCH_HIGH_THRESHOLD (default: 90) Specify the sensitivity of recognizing a swipe. Devices give absolute positions, so for some devices we need to adjust the thresholds. - TARGET_RECOVERY_UI_PROGRESS_BAR_BASELINE Specify the progress bar vertical position, which should be adjusted to the actual height of a device. It replaces the former progress_bar_y. - TARGET_RECOVERY_UI_ANIMATION_FPS (default: 30) Specify the animation FPS if using device-specific animation images. It replaces the former animation_fps. Devices can specify "TARGET_RECOVERY_UI_LIB := librecovery_ui_wear", with optionally defined Makefile vars above, in BoardConfig.mk to customize their WearRecoveryUI. Also remove the obsolete wear_touch.{cpp,h}, which has been merged into ui.cpp in commit 5f8dd9951d986b65d98d6a9ea38003427e9e46df. Bug: 64307776 Test: Change the device BoardConfig.mk and test recovery image. Change-Id: Id0fb2d4e3977ab5ddd31e71f9535470cab70e41b (cherry picked from commit 0470ceea381775b09eee931858c3320be88cc637)
2017-08-11wear_ui: Expose menu_unusable_rows via Makefile var.Tao Bao1-0/+6
This variable is useful on small screens (e.g. on watches) to handle long menus. We should have better way to handle this value smartly. Prior to that, expose the value to be overridable by using the generic wearable UI module (librecovery_ui_wear). Bug: 64307776 Test: Define the variable, build and boot into recovery image and check the UI menu. Change-Id: I5d7a6baa8bb4cc852bfcc2a7b3cc9686c1c8817e
2017-08-10Allow customizing WearRecoveryUI via Makefile variables.Tao Bao1-1/+22
With the following Makefile variables, we can reduce the work of writing (copy/pasting) device-specific WearRecoveryUI classes. The list of Makefile variables (the ones useful for Wear devices): - TARGET_RECOVERY_UI_MARGIN_HEIGHT (default: 0) - TARGET_RECOVERY_UI_MARGIN_WIDTH (default: 0) Specify the margin space that we don't want to display texts. They replace the former outer_width and outer_height. - TARGET_RECOVERY_UI_TOUCH_LOW_THRESHOLD (default: 50) - TARGET_RECOVERY_UI_TOUCH_HIGH_THRESHOLD (default: 90) Specify the sensitivity of recognizing a swipe. Devices give absolute positions, so for some devices we need to adjust the thresholds. - TARGET_RECOVERY_UI_PROGRESS_BAR_BASELINE Specify the progress bar vertical position, which should be adjusted to the actual height of a device. It replaces the former progress_bar_y. - TARGET_RECOVERY_UI_ANIMATION_FPS (default: 30) Specify the animation FPS if using device-specific animation images. It replaces the former animation_fps. Devices can specify "TARGET_RECOVERY_UI_LIB := librecovery_ui_wear", with optionally defined Makefile vars above, in BoardConfig.mk to customize their WearRecoveryUI. Also remove the obsolete wear_touch.{cpp,h}, which has been merged into ui.cpp in commit 5f8dd9951d986b65d98d6a9ea38003427e9e46df. Bug: 64307776 Test: Change the device BoardConfig.mk and test recovery image. Change-Id: Id0fb2d4e3977ab5ddd31e71f9535470cab70e41b
2017-08-03ui: Move the support for touch inputs into RecoveryUI.Tao Bao1-0/+12
- Added detection for EV_ABS events in minui/events.cpp, if it's allowed; - Added listening and processing touch inputs in ui.cpp; - Fixed an issue in recognizing swipe with multi-touch protocol A; - Changed the logic in RecoveryUI::ProcessKey() to be swipe-aware. It now allows turning on text mode with <power> + <swipe-up>. The last change also fixed an issue on devices with protocol A: prior to this CL, user may accidentally toggle the text mode during an OTA. Because it was considered as a single-button device, a long tap that sent BTN_TOUCH event would turn on text mode. Test: Allow detecting touch inputs. Swiping (up, down, enter) works on angler, angelfish, dorado respectively. Bug: 36169090 Bug: 64307776 Change-Id: I4bc882b99114ce4ab414f8bdb8f4f7a525b8a8fd (cherry picked from commit 5f8dd9951d986b65d98d6a9ea38003427e9e46df)
2017-08-02ui: Move the support for touch inputs into RecoveryUI.Tao Bao1-0/+12
- Added detection for EV_ABS events in minui/events.cpp, if it's allowed; - Added listening and processing touch inputs in ui.cpp; - Fixed an issue in recognizing swipe with multi-touch protocol A; - Changed the logic in RecoveryUI::ProcessKey() to be swipe-aware. It now allows turning on text mode with <power> + <swipe-up>. The last change also fixed an issue on devices with protocol A: prior to this CL, user may accidentally toggle the text mode during an OTA. Because it was considered as a single-button device, a long tap that sent BTN_TOUCH event would turn on text mode. Test: Allow detecting touch inputs. Swiping (up, down, enter) works on angler, angelfish, dorado respectively. Bug: 36169090 Change-Id: I4bc882b99114ce4ab414f8bdb8f4f7a525b8a8fd
2017-07-20recovery: replace make_ext4 with e2fsprogsJin Qian1-3/+5
Execute mke2fs to create empty ext4 filesystem. Execute e2fsdroid to add files to filesystem. Test: enter recovery mode and wipe data Bug: 35219933 Change-Id: I10a9f4c1f4754ad864b2df45b1f879180ab33876 (cherry picked from commit ac31808cd37cfb98755e5821dbb2efb5fe5cb12a)
2017-07-18Add libasyncio.Jerry Zhang1-0/+1
libadbd_usb depends on libasyncio. Bug: 37916658 Test: Use adb in recovery on bullhead/marlin Change-Id: I77ac3bb2a580d29551e7b5c471bc3cfbf1a3219d
2017-07-07Restructure vr_uiLuke Song1-0/+6
Get rid of pixel offset variables, and use makefile variables in BoardConfigs. Cherry picked from commit 81a8e4cab2a20fd1b1a4716563d4d2586bd1e1de Bug: 37779982 Test: Verified vr ui has same behavior. Change-Id: Ifbf44e27d7101aedbe3c0e6db4b8181d56efadfd
2017-07-06Introduce VR recovery uiLuke Song1-0/+12
A version of screen ui with specific adjustments for vr device compatibility. Cherry picked from commit a44dba7f4e7296077f65fd571232e8a61aed9418 Bug: 37779982 Test: "adb reboot recovery" to view Change-Id: If6b0f26c1b587f8d0176060685b5efb6c67593b1
2017-06-28Add missing libziparchive dependency.Elliott Hughes1-1/+2
Bug: http://b/37560614 Test: builds even after removing system/core/include/ziparchive Change-Id: Ib7ed45cafe83d24ed55aac28b4f41a073c371bc2
2017-06-27recovery: replace make_ext4 with e2fsprogsJin Qian1-3/+5
Execute mke2fs to create empty ext4 filesystem. Execute e2fsdroid to add files to filesystem. Test: enter recovery mode and wipe data Bug: 35219933 Change-Id: I10a9f4c1f4754ad864b2df45b1f879180ab33876 Merged-In: I10a9f4c1f4754ad864b2df45b1f879180ab33876
2017-06-24Restructure vr_uiLuke Song1-0/+6
Get rid of pixel offset variables, and use makefile variables in BoardConfigs. Bug: 37779982 Test: Verified vr ui has same behavior. Change-Id: Ifbf44e27d7101aedbe3c0e6db4b8181d56efadfd (cherry picked from commit 81a8e4cab2a20fd1b1a4716563d4d2586bd1e1de)
2017-06-23Restructure vr_uiLuke Song1-0/+6
Get rid of pixel offset variables, and use makefile variables in BoardConfigs. Bug: 37779982 Test: Verified vr ui has same behavior. Change-Id: Ifbf44e27d7101aedbe3c0e6db4b8181d56efadfd
2017-06-23Use Makefile variables to specify margin settings.Tao Bao1-0/+12
Instead of defining device-specific UI class, this CL allows using Makefile variables to specify margin values directly. Values explicitly defined via TARGET_RECOVERY_UI_MARGIN_HEIGHT and TARGET_RECOVERY_UI_MARGIN_WIDTH will be used. Otherwise they will default to zero. Bug: 62732748 Test: Specify the height and width and check recovery texts. Change-Id: Icb6f7466c8d407f877b93da38aebfdf7e6b41be7 (cherry picked from commit a92d8fb45676566a56d7c27d2e8fb644523adc94)
2017-06-23Use Makefile variables to specify margin settings.Tao Bao1-0/+12
Instead of defining device-specific UI class, this CL allows using Makefile variables to specify margin values directly. Values explicitly defined via TARGET_RECOVERY_UI_MARGIN_HEIGHT and TARGET_RECOVERY_UI_MARGIN_WIDTH will be used. Otherwise they will default to zero. Bug: 62732748 Test: Specify the height and width and check recovery texts. Change-Id: Icb6f7466c8d407f877b93da38aebfdf7e6b41be7 (cherry picked from commit a92d8fb45676566a56d7c27d2e8fb644523adc94)
2017-06-22Use Makefile variables to specify margin settings.Tao Bao1-0/+12
Instead of defining device-specific UI class, this CL allows using Makefile variables to specify margin values directly. Values explicitly defined via TARGET_RECOVERY_UI_MARGIN_HEIGHT and TARGET_RECOVERY_UI_MARGIN_WIDTH will be used. Otherwise they will default to zero. Bug: 62732748 Test: Specify the height and width and check recovery texts. Change-Id: Icb6f7466c8d407f877b93da38aebfdf7e6b41be7
2017-06-19recovery: replace make_ext4 with e2fsprogsJin Qian1-3/+5
Execute mke2fs to create empty ext4 filesystem. Execute e2fsdroid to add files to filesystem. Test: enter recovery mode and wipe data Bug: 35219933 Change-Id: I10a9f4c1f4754ad864b2df45b1f879180ab33876
2017-06-17Introduce VR recovery uiLuke Song1-0/+12
A version of screen ui with specific adjustments for vr device compatibility. (cherrypick of a44dba7f4e7296077f65fd571232e8a61aed9418 to AOSP) Bug: 37779982 Test: "adb reboot recovery" to view Change-Id: If6b0f26c1b587f8d0176060685b5efb6c67593b1
2017-06-15Introduce VR recovery uiLuke Song1-0/+12
A version of screen ui with specific adjustments for vr device compatibility. Bug: 37779982 Test: "adb reboot recovery" to view Change-Id: If6b0f26c1b587f8d0176060685b5efb6c67593b1
2017-05-17libbootloader_message: convert to Android.bpTom Cherry1-1/+0
Test: build Change-Id: Ia0c2e141673e37eea29306817d2f4b2c944213b0
2017-05-10otautil: Android.mk -> Android.bpSteven Moreland1-1/+0
Test: flash and boot recovery on internal angler Change-Id: Id8845b4b422d0078b251333eb6d30ce14771ef10
2017-05-08recovery: Use libverifier instead of rebuilding the sources.Tao Bao1-3/+1
Test: mmma bootable/recovery Change-Id: Ie8cec009b00c121948179518ba9cbc26a82352bf
2017-05-03fuse_sideload: Change the minimal block size to 4096.Tao Bao1-1/+3
run_fuse_sideload() is passing the block size as the max_read option, so it will only handle a request that involves at most two blocks at a time. However, the minimal allowed value was set to 1024 prior to this CL, which is inconsistent with the kernel code (fs/fuse/inode.c) that sets it to the greater of 4096 and the passed-in max_read option. This would fail the calls with a block size / max_read less than 4096 due to the wrongly computed block indices. Note that we didn't observe real issue in practice, because we have been using 64 KiB block sizes for both of adb and sdcard sideload calls. The issue only shows up in my local CL (to come later) that uses 1024 block size in run_fuse_sideload() tests. Test: recovery_component_test Test: adb sideload with the new recovery image on angler Change-Id: Id9f0cfea13d0d193dcb7cd41a1553a23739545f2
2017-04-27libfusesideload: Clean up the CFLAGS for the module.Tao Bao1-3/+2
Remove "-DADB_HOST=0" since it doesn't include adb related stuff. Test: mmma bootable/recovery Test: sideload on marlin Change-Id: Ia83a8edd31eedd803435d687513d561c873ffabe
2017-04-24recovery: Remove the include of adb.h.Tao Bao1-2/+0
recovery.cpp doesn't have a direct dependency on adb.h (only minadbd does). 'adb.h' was once needed for DEFAULT_ADB_PORT, until being killed by commit acb2a2fa4c415944a27539461ba3757f3edbb128. Test: mmma bootable/recovery Change-Id: I84f87988d01c3f0c3d1383cc3cffde2e7d5e7aea
2017-04-24librecovery: Remove -Wno-unused-parameter and add -Wall.Tao Bao1-1/+1
Test: mmma bootable/recovery Change-Id: I5598d32bebb9dbda4a183a1502e0b7dc4918392e
2017-04-20Call libvintf to verify package compatibility.Tao Bao1-0/+4
The libvintf API has landed. Hook up to do the actual verification. Bug: 36597505 Test: recovery_component_test Test: m recoveryimage; adb sideload on angler and sailfish, with packages that contain dummy compatibility entries. Test: m recoveryimage; adb sideload on angler and sailfish, with packages that don't contain any compatibility entries. Change-Id: Idbd6f5aaef605ca51b20e667505d686de5ac781f (cherry picked from commit da320ac6ab53395ddff3cc08b88a61f977ed939a)
2017-04-19Call libvintf to verify package compatibility.Tao Bao1-0/+4
The libvintf API has landed. Hook up to do the actual verification. Bug: 36597505 Test: recovery_component_test Test: m recoveryimage; adb sideload on angler and sailfish, with packages that contain dummy compatibility entries. Test: m recoveryimage; adb sideload on angler and sailfish, with packages that don't contain any compatibility entries. Change-Id: Idbd6f5aaef605ca51b20e667505d686de5ac781f
2017-04-18Add the missing LOCAL_CFLAGS for librecovery.Tao Bao1-0/+5
The -DAB_OTA_UDPATER part was missing when separating the librecovery module (commit 62e0bc7586077b3bde82759fb34b51b982cea20f). Bug: 37300957 Test: Build sailfish recovery image and sideload full OTA. Change-Id: Idd25662f6bc812c1aca95b096802f59b051f8d63 (cherry picked from commit 25dbe1717e3096ee59bfa4385cbcf80a972016a6)
2017-04-13Add the missing LOCAL_CFLAGS for librecovery.Tao Bao1-0/+5
The -DAB_OTA_UDPATER part was missing when separating the librecovery module (commit 62e0bc7586077b3bde82759fb34b51b982cea20f). Bug: 37300957 Test: Build sailfish recovery image and sideload full OTA. Change-Id: Idd25662f6bc812c1aca95b096802f59b051f8d63
2017-04-13Verify the package compatibility with libvintf.Tao Bao1-3/+21
verify_package_compatibility() is added to parse the compatibility entry (compatibility.zip) in a given OTA package. If entry is present, the information is sent to libvintf to check the compatibility. This CL doesn't actually call libvintf, since the API there is not available yet. Bug: 36597505 Test: Doesn't break the install with existing packages (i.e. w/o the compatibility entry). Test: recovery_component_test Change-Id: I3903ffa5f6ba33a5c0d761602ade6290c6752596 (cherry picked from commit 62e0bc7586077b3bde82759fb34b51b982cea20f)
2017-04-12Verify the package compatibility with libvintf.Tao Bao1-3/+21
verify_package_compatibility() is added to parse the compatibility entry (compatibility.zip) in a given OTA package. If entry is present, the information is sent to libvintf to check the compatibility. This CL doesn't actually call libvintf, since the API there is not available yet. Bug: 36597505 Test: Doesn't break the install with existing packages (i.e. w/o the compatibility entry). Test: recovery_component_test Change-Id: I3903ffa5f6ba33a5c0d761602ade6290c6752596
2017-04-03Boot control HAL based on the A/B headers.Alex Deymo1-0/+1
The added bootctrl.bcb module implement the legacy interface for the bootctrl HAL based on the Boot Control Block (BCB) and the headers already specified in the booloader_message library. This serves as a reference implementation of the boot_control HAL. Bug: 32707546 Test: Tested internally that a device can use this HAL to flip slots and recovery from a /misc wipe. Change-Id: Ic02e5aaf4de7d0a1780eac4e8705dae20d0b3e10
2017-03-29Log the error message when failing to mount/umount.Tao Bao1-2/+4
Test: Observe the error messaage for a umount failure case. Bug: 36686818 Change-Id: I28e335c2df4454dd0192f95e3909599fcc9dc1c0
2017-03-18Remove the dead #include's in verifier.cpp.Tao Bao1-4/+1
A follow-up to commit 5e535014dd7961fbf812abeaa27f3339775031f1. Also clean up Android.mk, since libverifier no longer needs anything from libminui. Test: mmma bootable/recovery Test: recovery_component_test passes. Change-Id: I1c11e4bbeef67ca34a2054debf1f5b280d509217
2017-01-17minui: Export minui/minui.h.Tao Bao1-1/+5
For libminui static and shared libraries. Test: build Change-Id: Ib30dc5e2ef4a3c8b3ca3a0cec68cb65e229a0c16
2017-01-11Remove "_static" suffix from libsparseAlex Deymo1-1/+1
Bug: 34220783 Change-Id: I358f931f0b29f5bd526e1475180e477e2e90b936
2017-01-11Remove "_static" suffix from libext4_utils.Alex Deymo1-1/+1
Bug: 34220783 Change-Id: I34ccc3b11da0d1b48805967ad75b9ddade569930
2016-11-04Cleanup the duplicates of logs rotation functionsTianjie Xu1-3/+8
Bug: 32067516 Test: Logs rotated successfully on angler, recovery-refresh/persist tests passed on an a/b device. Change-Id: Ie80adf0fa958ad3d7869d2d17f49489666b86c29
2016-10-18Create bootloader_message static library.Yabin Cui1-6/+8
bootloader_messages merges bootloader_message_writer and bootloader.cpp, so we can use the same library to manage bootloader_message in normal boot and recovery mode. Bug: 29582118 Change-Id: I9efdf776ef8f02b53911ff43a518e035e0c29618 (cherry picked from commit 2f272c0551f984e83bc5abaf240e0dddb38a3326)
2016-10-18Replace minzip with libziparchiveTianjie Xu1-2/+3
Clean up the duplicated codes that handle the zip files in bootable/recovery; and rename the library of the remaining utility functions to libotautil. Test: Update package installed successfully on angler. Bug: 19472796 Change-Id: Iea8962fcf3004473cb0322b6bb3a9ea3ca7f679e
2016-10-09Update the header path for ext4_utils.Tao Bao1-4/+0
Test: `mmma bootable/recovery` Change-Id: I70ccddb3ddf46bb012fdc5f632afc46ebdd5473e
2016-10-09Disable the meaningless parts of the UI for A/B.Elliott Hughes1-0/+4
Bug: http://b/28748484 Test: mmma bootable/recovery Change-Id: Ie86a265f4699503471e7c717d65677a916dbd25b (cherry picked from commit 01fcbe160bd49891c0680b80c5688cd4feb2adbc)
2016-10-07Update the header path for ext4_utils.Tao Bao1-4/+0
Test: `mmma bootable/recovery` Change-Id: I70ccddb3ddf46bb012fdc5f632afc46ebdd5473e (cherry picked from commit 3cbe1d20978dc488272e2b1ba10890a006fdfab9)
2016-09-30Turn on -Werror for recoveryTianjie Xu1-1/+2
Also remove the 0xff comparison when validating the bootloader message fields. As the fields won't be erased to 0xff after we remove the MTD support. Bug: 28202046 Test: The recovery folder compiles for aosp_x86-eng Change-Id: Ibb30ea1b2b28676fb08c7e92a1e5f7b6ef3247ab (cherry picked from commit 7aa88748f6ec4e53333d1a15747bc44826ccc410)
2016-09-30Turn on -Werror for recoveryTianjie Xu1-1/+2
Also remove the 0xff comparison when validating the bootloader message fields. As the fields won't be erased to 0xff after we remove the MTD support. Bug: 28202046 Test: The recovery folder compiles for aosp_x86-eng Change-Id: Ibb30ea1b2b28676fb08c7e92a1e5f7b6ef3247ab
2016-09-01Switch recovery to libbase loggingTianjie Xu1-1/+1
Clean up the recovery image and switch to libbase logging. Bug: 28191554 Change-Id: Icd999c3cc832f0639f204b5c36cea8afe303ad35 (cherry picked from commit 747781433fb01f745529c7e9dd97c5599070ad0d)
2016-09-01Switch recovery to libbase loggingTianjie Xu1-1/+1
Clean up the recovery image and switch to libbase logging. Bug: 28191554 Change-Id: Icd999c3cc832f0639f204b5c36cea8afe303ad35 Merged-In: Icd999c3cc832f0639f204b5c36cea8afe303ad35
2016-09-01Switch recovery to libbase loggingTianjie Xu1-1/+1
Clean up the recovery image and switch to libbase logging. Bug: 28191554 Change-Id: Icd999c3cc832f0639f204b5c36cea8afe303ad35
2016-08-06Fix references to libcrypto_utils_static.Josh Gao1-4/+4
Bug: http://b/30708454 Change-Id: I7a5048beff1d8b783a9683dcb4a79606a77f20ee
2016-06-30Create bootloader_message static library.Yabin Cui1-5/+7
bootloader_messages merges bootloader_message_writer and bootloader.cpp, so we can use the same library to manage bootloader_message in normal boot and recovery mode. Bug: 29582118 Change-Id: I9efdf776ef8f02b53911ff43a518e035e0c29618
2016-06-10Remove obsolete MTD support.Elliott Hughes1-9/+13
Bug: http://b/29250988 Change-Id: Ia97ba9082a165c37f74d6e1c3f71a367adc59945
2016-05-24Disable the meaningless parts of the UI for A/B.Elliott Hughes1-0/+4
Bug: http://b/28748484 Change-Id: Ie86a265f4699503471e7c717d65677a916dbd25b
2016-04-14Use BoringSSL instead of mincrypt to speed up package verification.Elliott Hughes1-2/+3
This changes the verification code in bootable/recovery to use BoringSSL instead of mincrypt. Cherry-pick of 452df6d99c81c4eeee3d2c7b2171901e8b7bc54a, with merge conflict resolution, extra logging in verifier.cpp, and an increase in the hash chunk size from 4KiB to 1MiB. Bug: http://b/28135231 Change-Id: I1ed7efd52223dd6f6a4629cad187cbc383d5aa84
2016-04-06Convert recovery to use BoringSSL instead of mincrypt.Mattias Nissler1-2/+4
This changes the verification code in bootable/recovery to use BoringSSL instead of mincrypt. Change-Id: I37b37d84b22e81c32ac180cd1240c02150ddf3a7
2016-03-31recovery: use __android_log_pmsg_file_write for log filesMark Salyzyn1-0/+24
(cherry-pick from commit a4f701af93a5a739f34823cde0c493dfbc63537a) - Add call to __android_log_pmsg_file_write for recovery logging. - Add call to refresh pmsg if we reboot back into recovery and then allow overwrite of those logs. - Add a new one-time executable recovery-refresh that refreshes pmsg in post-fs phase of init. We rely on pmsg eventually scrolling off to age the content after recovery-persist has done its job. - Add a new one-time executable recovery-persist that transfers from pmsg to /data/misc/recovery/ directory if /cache is not mounted in post-fs-data phase of init. - Build and appropriately trigger the above two as required if BOARD_CACHEIMAGE_PARTITION_SIZE is undefined. - Add some simple unit tests NB: Test failure is expected on systems that do not deliver either the recovery-persist or recovery-refresh executables, e.g. systems with /cache. Tests also require a timely reboot sequence of test to truly verify, tests provide guidance on stderr to direct. Bug: 27176738 Change-Id: I17bb95980234984f6b2087fd5941b0a3126b706b
2016-03-28recovery: use __android_log_pmsg_file_write for log filesMark Salyzyn1-0/+24
- Add call to __android_log_pmsg_file_write for recovery logging. - Add call to refresh pmsg if we reboot back into recovery and then allow overwrite of those logs. - Add a new one-time executable recovery-refresh that refreshes pmsg in post-fs phase of init. We rely on pmsg eventually scrolling off to age the content after recovery-persist has done its job. - Add a new one-time executable recovery-persist that transfers from pmsg to /data/misc/recovery/ directory if /cache is not mounted in post-fs-data phase of init. - Build and appropriately trigger the above two as required if BOARD_CACHEIMAGE_PARTITION_SIZE is undefined. - Add some simple unit tests NB: Test failure is expected on systems that do not deliver either the recovery-persist or recovery-refresh executables, e.g. systems with /cache. Tests also require a timely reboot sequence of test to truly verify, tests provide guidance on stderr to direct. Bug: 27176738 Change-Id: I17bb95980234984f6b2087fd5941b0a3126b706b
2016-03-18recovery: Move SwipeDetector into common locationPrashant Malani1-0/+1
The SwipeDetector class is used almost unchanged in all locations. This patch moves it into the recovery module, from which devices can reference it if required. The class is now renamed to WearSwipeDetector. Bug: 27407422 Change-Id: Ifd3c7069a287548b89b14ab5d6d2b90a298e0145
2016-03-03Fix the improper use of LOCAL_WHOLE_STATIC_LIBRARIES.Tao Bao1-3/+6
If two libraries both use LOCAL_WHOLE_STATIC_LIBRARIES and include a same library, there would be linking errors when generating a shared library (or executable) that depends on the two libraries both. Also clean up Android.mk files. Remove the "LOCAL_MODULE_TAGS := eng" line for the updater module. The module will then default to "optional" which won't be built until needed. Change-Id: I3ec227109b8aa744b7568e7f82f575aae3fe0e6f
2016-02-23recovery: check battery level before installing package.Yabin Cui1-0/+4
Bug: 26879394 Change-Id: I63dce5bc50c2e104129f1bcab7d3cad5682bf45d (cherry picked from commit 53e7a0628f4acc95481f556ba51800df4a1de37d)
2016-02-20recovery: check battery level before installing package.Yabin Cui1-0/+4
Bug: 26879394 Change-Id: I63dce5bc50c2e104129f1bcab7d3cad5682bf45d
2016-02-10IO fault injection for OTA packagesJed Estep1-0/+1
Bug: 25951086 Change-Id: I31c74c735eb7a975b7f41fe2b2eff042e5699c0c (cherry-picked from commit f1fc48c6e62cfee42d25ad12f443e22d50c15d0b)
2016-02-04Refactor existing tests to use gtestJed Estep1-19/+1
Bug: 26962907 Change-Id: I5f80636af1740badeff7d08193f08e23f4e4fee1
2016-01-06IO fault injection for OTA packagesJed Estep1-0/+1
Bug: 25951086 Change-Id: I31c74c735eb7a975b7f41fe2b2eff042e5699c0c
2015-12-08Add update_verifier for A/B OTA update.Tao Bao1-0/+1
update_verifier checks the integrity of the updated system and vendor partitions on the first boot post an A/B OTA update. It marks the current slot as having booted successfully if it passes the verification. This CL doesn't perform any actual verification work which will be addressed in follow-up CLs. Bug: 26039641 Change-Id: Ia5504ed25b799b48b5886c2fc68073a360127f42 (cherry picked from commit 1171d3a12b13ca3f1d4301985cf068076e55ae26)
2015-12-07Add update_verifier for A/B OTA update.Tao Bao1-0/+1
update_verifier checks the integrity of the updated system and vendor partitions on the first boot post an A/B OTA update. It marks the current slot as having booted successfully if it passes the verification. This CL doesn't perform any actual verification work which will be addressed in follow-up CLs. Bug: 26039641 Change-Id: Ia5504ed25b799b48b5886c2fc68073a360127f42
2015-11-16Stop using libstdc++.Dan Albert1-2/+0
These are already getting libc++, so it isn't necessary. If any of the other static libraries (such as adb) use new or delete from libc++, there will be symbol collisions. Change-Id: I55e43ec60006d3c2403122fa1174bde06f18e09f (cherry picked from commit e49a9e527a51f43db792263bb60bfc91293848da)
2015-11-16recovery: Switch to clangTao Bao1-2/+4
And a few trival fixes to suppress warnings. Change-Id: Id28e3581aaca4bda59826afa80c0c1cdfb0442fc (cherry picked from commit 80e46e08de5f65702fa7f7cd3ef83f905d919bbc)
2015-10-28recovery: Depend on mkfs.f2fs only if needed.Tao Bao1-0/+2
Don't build mkfs.f2fs unless device defines TARGET_USERIMAGES_USE_F2FS. Change-Id: Ifac592c30315bbe7590c8fbf3a0844e6a7a31a1a
2015-09-09Track usage of Vector / SortedVector from libutils DO NOT MERGENarayan Kamath1-0/+1
bug: 22953624 Change-Id: Ifcc17e39433ac91ca41da5d336fb3006dfbb65a8
2015-08-25recovery: Factor out wear_ui.{cpp,h} into bootable/recovery.Tao Bao1-0/+1
Every watch has a (mostly identical) copy of the wear_ui. Factor them out into a single copy for easier maintenance. Device-specific settings should be defined in recovery_ui.cpp that inherits WearRecoveryUI class. Bug: 22451422 Change-Id: Id07efca37d1b1d330e6327506c7b73ccf6ae9241
2015-07-24recovery: Switch fuse_* to C++.Tao Bao1-2/+2
Change-Id: Id50c3e6febd0ab61f10a654b9b265cf21a2d1701 (cherry picked from commit 71dc365f25676cfb3f62dbb7163697a8c3c5243d)
2015-07-20recovery: Switch fuse_* to C++.Tao Bao1-2/+2
Change-Id: I68770ad1a9e99caee292f8010cfd37dfea3acc64
2015-06-03recovery: Switch to clangTao Bao1-2/+4
And a few trival fixes to suppress warnings. Change-Id: I38734b5f4434643e85feab25f4807b46a45d8d65
2015-05-19Stop using libstdc++.Dan Albert1-2/+0
These are already getting libc++, so it isn't necessary. If any of the other static libraries (such as adb) use new or delete from libc++, there will be symbol collisions. Change-Id: I55e43ec60006d3c2403122fa1174bde06f18e09f
2015-04-14Move the menu header out of the menu.Elliott Hughes1-0/+1
This makes it easier for us to deal with arbitrary information at the top, and means that headers added by specific commands don't overwrite the default ones. Add the fingerprint back, but broken up so it fits even on sprout's display. Change-Id: Id71da79ab1aa455a611d72756a3100a97ceb4c1c
2015-04-10Move "Mount /system" to the main menu.Elliott Hughes1-1/+0
Everyone's adding secret key combinations for this anyway, and it's very useful when debugging. Change-Id: Iad549452b872a7af963dd649f283ebcd3ea24234
2015-04-09Move default implementations into Device.Elliott Hughes1-5/+6
The current abstract class was a nice idea but has led to a lot of copy & paste in practice. Right now, no one we know of has any extra menu items, so let's make the default menu available to everyone. (If we assume that someone somewhere really does need custom device-specific menu options, a better API would let them add to our menu rather than replacing it.) Change-Id: I59f6a92f3ecd830c2ce78ce9da19eaaf472c5dfa
2015-03-11Install the recovery binary directly to the recovery image.Ying Wang1-5/+1
This eliminated the previous hack, that doesn't work reliably with the "LOCAL_REQUIRED_MODULES := mkfs.f2fs". Bug: 19666886 Change-Id: I1f0a2d41129f402c0165f3b86b6fda077291f282
2015-03-10Install the recovery binary directly to the recovery image.Ying Wang1-5/+1
This eliminated the previous hack, that doesn't work reliably with the "LOCAL_REQUIRED_MODULES := mkfs.f2fs". Bug: 19666886 Change-Id: I1f0a2d41129f402c0165f3b86b6fda077291f282
2015-02-20Kill of most of the remainder of minadbd.Dan Albert1-1/+0
I think everything left now is here to stay (services.c might get massaged in to libadbd if it gets refactored). Bug: 17626262 Change-Id: I01faf8b277a601a40e3a0f4c3b8206c97f1d2ce6
2015-02-19Use headers from adb.Dan Albert1-3/+4
adb.h has diverged a bit, so that one will be more involved, but these three are all trivial, unimportant changes. Change-Id: Ief8474c1c2927d7e955adf04f887c76ab37077a6
2015-02-19Lose USB transport code to libadb.Dan Albert1-1/+1
Bug: 17626262 Change-Id: If41031ba20a3a75fa510f155c654a482b47e409d
2015-01-23Remove superfluous OpenSSL include paths.Adam Langley1-1/+0
This include path was needed because system/vold/cryptfs.h included an OpenSSL header just to get the length of a SHA-256 hash. This has been fixed in https://android-review.googlesource.com/#/c/124477/1. Change-Id: I06a8ba0ee5b9efcc3260598f07d9819f065711de
2014-11-25Start losing code to libadb.Dan Albert1-0/+1
Bug: 17626262 Change-Id: I8ce7cff2b7789f39f35a4211d7120d072c05a863
2014-11-07Fix build when TARGET_USERIMAGES_USE_EXT4 is not definedAdrien Grassein1-1/+3
The cryptfs.h files is always included, but its path is only included when TARGET_USERIMAGES_USE_EXT4 is defined. Change-Id: Iec6aa4601a56a1feac456a21a53a08557dc1d00d
2014-07-10do sdcard sideloading through the fuse filesystemDoug Zongker1-1/+2
Make a fuse filesystem that sits on top of the selected package file on the sdcard, so we can verify that the file contents don't change while being read and avoid copying the file to /tmp (that is, RAM) before verifying and installing it. Change-Id: Ifd982aa68bfe469eda5f839042648654bf7386a1
2014-07-10refactor fuse sideloading codeDoug Zongker1-0/+13
Split the adb-specific portions (fetching a block from the adb host and closing the connections) out from the rest of the FUSE filesystem code, so that we can reuse the fuse stuff for installing off sdcards as well. Change-Id: I0ba385fd35999c5f5cad27842bc82024a264dd14
2014-06-18Use LOCAL_REQUIRED_MODULES for mkfs.f2fsJi-Hwan Lee1-5/+3
Instead of LOCAL_ADDITIONAL_DEPENDENCIES. Bug: 15702524 Change-Id: Ic152ae60354bf09eccdb9a85dcd04f0f076a6422
2014-06-17Support F2FS for the data partitionJP Abgrall1-0/+6
This adds F2FS support - for wiping a device - for the install "format" command. Note: crypto data in "footer" with a default/negative length is not supported, unlike with "ext4". Change-Id: I8d141a0d4d14df9fe84d3b131484e9696fcd8870 Signed-off-by: JP Abgrall <jpa@google.com>
2014-03-11remove pixelflinger from recoveryDoug Zongker1-1/+0
Recovery now draws directly to the framebuffer by rolling its own graphics code, rather than depending on libpixelflinger. The recovery UI is modified slightly to eliminate operations that are slow with the software implementation: when the text display / menu is turned on, it now appears on a black background instead of a dimmed version of the recovery icon. There's probably substantial room for optimization of the graphics operations. Bug: 12131110 Change-Id: Iab6520e0a7aaec39e2ce39377c10aef82ae0c595 Conflicts: minui/resources.c
2014-03-11allow CheckKey to request mounting /systemDoug Zongker1-0/+1
Also provide a default implementation of CheckKey that's reasonable for many devices (those that have power and volume keys). Change-Id: Icf6c7746ebd866152d402059dbd27fd16bd51ff8
2014-03-11remove pixelflinger from recoveryDoug Zongker1-1/+0
Recovery now draws directly to the framebuffer by rolling its own graphics code, rather than depending on libpixelflinger. The recovery UI is modified slightly to eliminate operations that are slow with the software implementation: when the text display / menu is turned on, it now appears on a black background instead of a dimmed version of the recovery icon. There's probably substantial room for optimization of the graphics operations. Bug: 12131110 Change-Id: Iab6520e0a7aaec39e2ce39377c10aef82ae0c595
2014-03-03Fix build break caused by vold changePaul Lawrence1-0/+1
cryptfs.h now includes sha header from libcrypto folder Change-Id: Icd02c88971aedf96040c3bd9ca759e531546023b
2014-02-14clean up some warnings when building recoveryDoug Zongker1-0/+2
Change-Id: I1541534ee6978ddf8d548433986679ce9507d508
2014-02-14remove 'retouch' ASLR supportDoug Zongker1-1/+0
Older versions of android supported an ASLR system where binaries were randomly twiddled at OTA install time. Remove support for this; we now use the ASLR support in the linux kernel. Change-Id: I8348eb0d6424692668dc1a00e2416fbef6c158a2
2014-01-16program to store unencrypted files in an encrypted filesystemDoug Zongker1-0/+1
uncrypt can read a file on an encrypted filesystem and rewrite it to the same blocks on the underlying (unencrypted) block device. This destroys the contents of the file as far as the encrypted filesystem is concerned, but allows the data to be read without the encryption key if you know which blocks of the raw device to access. uncrypt produces a "block map" file which lists the blocks that contain the file. For unencrypted filesystem, uncrypt will produce the block map without touching the data. Bug: 12188746 Change-Id: Ib7259b9e14dac8af406796b429d58378a00c7c63
2014-01-16do verification and extraction on memory, not filesDoug Zongker1-0/+1
Changes minzip and recovery's file signature verification to work on memory regions, rather than files. For packages which are regular files, install.cpp now mmap()s them into memory and then passes the mapped memory to the verifier and to the minzip library. Support for files which are raw block maps (which will be used when we have packages written to encrypted data partitions) is present but largely untested so far. Bug: 12188746 Change-Id: I12cc3e809834745a489dd9d4ceb558cbccdc3f71
2013-12-13recovery: wipe encryption metadata along with data partitionDoug Zongker1-1/+1
This assumes that the metadata is correctly defined in fstab. Which apparently some devices don't do. Bug: 8766487 Bug: 12112624 Change-Id: I1b14b9d4c888e9348527984be3dce04bdd9f4de0
2013-10-10Add support for ECDSA signaturesKenny Root1-1/+10
This adds support for key version 5 which is an EC key using the NIST P-256 curve parameters. OTAs may be signed with these keys using the ECDSA signature algorithm with SHA-256. Change-Id: Id88672a3deb70681c78d5ea0d739e10f839e4567
2013-09-05allow CheckKey to request mounting /systemDoug Zongker1-0/+1
Also provide a default implementation of CheckKey that's reasonable for many devices (those that have power and volume keys). Change-Id: Icf6c7746ebd866152d402059dbd27fd16bd51ff8
2013-04-10Add liblogYing Wang1-0/+1
Bug: 8580410 Change-Id: Ie60dade81c06589cb0daee431611ded34adef8e6
2013-02-20Move to using the new unified fstab in recovery.Ken Sumrall1-0/+2
Instead of reading it's own fstab, have recovery invoke fs_mgr to read the unified fstab. Change-Id: I80c75d2c53b809ac60a4a69f0ef7ebfa707c39e9
2012-10-16Remove HAVE_SELINUX guardsKenny Root1-12/+1
Change-Id: Ia96201f20f7838d7d9e8926208977d3f8318ced4
2012-08-24Add libm due to libpng dependency.Stephen Hines1-0/+1
Change-Id: I0bdc2df5ef358813587f613a1b50eaa850e95782
2012-08-14Use the static version of libsparseJoe Onorato1-1/+1
Change-Id: I664f8dc7939f8f902e4775eaaf6476fcd4ab8ed2
2012-08-14Multiple modules with the same name are going away.Joe Onorato1-35/+59
Change-Id: I4154db066865d6031caa3c2c3b94064b2f28076e
2012-07-24Use the static version of libsparseJoe Onorato1-1/+1
Change-Id: I664f8dc7939f8f902e4775eaaf6476fcd4ab8ed2
2012-07-22Multiple modules with the same name are going away.Joe Onorato1-35/+59
Change-Id: I4154db066865d6031caa3c2c3b94064b2f28076e
2012-07-18Link against libsparseColin Cross1-2/+2
libext4_utils requires libsparse, link against it as well. Change-Id: I4d6aec0e5edcf1ed42118b7b77adcded2858d3dd
2012-03-30Extend recovery and updater to support setting file security contexts.Stephen Smalley1-1/+2
Extend minzip, recovery, and updater to set the security context on files based on the file_contexts configuration included in the package. Change-Id: Ied379f266a16c64f2b4dca15dc39b98fcce16f29
2012-01-31libz is a superset of libunz, so we don't need both.Elliott Hughes1-2/+2
Change-Id: I082995c338feaf5d11288300768624cd51b027a4
2012-01-24Add libselinux to LOCAL_STATIC_LIBRARIES wherever libext4_utils is used.Stephen Smalley1-0/+11
libext4_utils now calls libselinux in order to determine the file security context to set on files when creating ext4 images. Change-Id: I09fb9d563d22ee106bf100eacd4cd9c6300b1152
2012-01-18support "sideload over ADB" modeDoug Zongker1-2/+4
Rather than depending on the existence of some place to store a file that is accessible to users on an an unbootable device (eg, a physical sdcard, external USB drive, etc.), add support for sideloading packages sent to the device with adb. This change adds a "minimal adbd" which supports nothing but receiving a package over adb (with the "adb sideload" command) and storing it to a fixed filename in the /tmp ramdisk, from where it can be verified and sideloaded in the usual way. This should be leave available even on locked user-build devices. The user can select "apply package from ADB" from the recovery menu, which starts minimal-adb mode (shutting down any real adbd that may be running). Once minimal-adb has received a package it exits (restarting real adbd if appropriate) and then verification and installation of the received package proceeds. always initialize usb product, vendor, etc. for adb in recovery Set these values even on non-debuggable builds, so that the mini-adb now in recovery can work.
2012-01-10support "sideload over ADB" modeDoug Zongker1-2/+4
Rather than depending on the existence of some place to store a file that is accessible to users on an an unbootable device (eg, a physical sdcard, external USB drive, etc.), add support for sideloading packages sent to the device with adb. This change adds a "minimal adbd" which supports nothing but receiving a package over adb (with the "adb sideload" command) and storing it to a fixed filename in the /tmp ramdisk, from where it can be verified and sideloaded in the usual way. This should be leave available even on locked user-build devices. The user can select "apply package from ADB" from the recovery menu, which starts minimal-adb mode (shutting down any real adbd that may be running). Once minimal-adb has received a package it exits (restarting real adbd if appropriate) and then verification and installation of the received package proceeds. Change-Id: I6fe13161ca064a98d06fa32104e1f432826582f5
2011-11-04move key processing to RecoveryUIDoug Zongker1-2/+3
Move the key for handling keys from ScreenRecoveryUI to RecoveryUI, so it can be used by devices without screens. Remove the UIParameters struct and replace it with some new member variables in ScreenRecoveryUI. Change-Id: I70094ecbc4acbf76ce44d5b5ec2036c36bdc3414
2011-11-01fix verifier testDoug Zongker1-2/+2
Needs to link with libminui and ui.cpp now. Change-Id: I5005e12cf8adb13d320921e3f9174e8c7304d7bf
2011-11-01move key processing to RecoveryUIDoug Zongker1-0/+1
Move the key for handling keys from ScreenRecoveryUI to RecoveryUI, so it can be used by devices without screens. Remove the UIParameters struct and replace it with some new member variables in ScreenRecoveryUI. Change-Id: I4c0e659edcbedc0b9e86ed261ae4dbb3c6097414
2011-10-31C++ class for device-specific codeDoug Zongker1-7/+7
Replace the device-specific functions with a class. Move some of the key handling (for log visibility toggling and rebooting) into the UI class. Fix up the key handling so there is less crosstalk between the immediate keys and the queued keys (an increasing annoyance on button-limited devices). Change-Id: I698f6fd21c67a1e55429312a0484b6c393cad46f
2011-10-31temporarily remove verifier_test binaryDoug Zongker1-6/+6
Change-Id: I61f249861b27180225fb786901275d2da611531b
2011-10-31refactor ui functions into a classDoug Zongker1-1/+1
Move all the functions in ui.c to be members of a ScreenRecoveryUI class, which is a subclass of an abstract RecoveryUI class. Recovery then creates a global singleton instance of this class and then invoke the methods to drive the UI. We use this to allow substitution of a different RecoveryUI implementation for devices with radically different form factors (eg, that don't have a screen). Change-Id: I76bdd34eca506149f4cc07685df6a4890473f3d9
2011-10-31C++ class for device-specific codeDoug Zongker1-1/+1
Replace the device-specific functions with a class. Move some of the key handling (for log visibility toggling and rebooting) into the UI class. Fix up the key handling so there is less crosstalk between the immediate keys and the queued keys (an increasing annoyance on button-limited devices). Change-Id: I8bdea6505da7974631bf3d9ac3ee308f8c0f76e1
2011-10-31turn recovery into a C++ binaryDoug Zongker1-7/+7
Change-Id: I423a23581048d451d53eef46e5f5eac485b77555
2011-10-29refactor ui functions into a classDoug Zongker1-1/+1
Move all the functions in ui.c to be members of a ScreenRecoveryUI class, which is a subclass of an abstract RecoveryUI class. Recovery then creates a global singleton instance of this class and then invoke the methods to drive the UI. We use this to allow substitution of a different RecoveryUI implementation for devices with radically different form factors (eg, that don't have a screen). Change-Id: I7fd8b2949d0db5a3f47c52978bca183966c86f33
2011-10-28turn recovery into a C++ binaryDoug Zongker1-7/+7
Change-Id: I68a67a4c8edec9a74463b3d4766005ce27b51316
2011-07-12Remove the simulator target from all makefiles.Jeff Brown1-4/+0
Bug: 5010576 Change-Id: Ib465fdb42c8621899bea15c04a427d7ab1641a8c
2011-02-09Fix x86 build.Ying Wang1-3/+0
Change-Id: Iada6268b0a72ee832113ea397334cc7950a37051
2011-01-18remove encrypted filesystem code from recoveryDoug Zongker1-2/+1
This was never used; encrypted filesystems are being done a different way now. Change-Id: I519c57b9be44d001f0b81516af7bfc252069892b
2010-09-21remove the notion of "root path"; support mixed flash typesDoug Zongker1-2/+3
Remove the wacky notion of "roots" and "root paths" (those things that look like "FOO:some/path" instead of just "/foo/some/path"). Let each device specify its own table of available partitions and how to mount them (needed for devices that use both MTD/yaffs2 and EMMC/ext4 partitions). (Cherrypicked from gingerbread w/slight edits.) Change-Id: I2479ce76b13e73f1d12035c89386c3a82b3edf51
2010-09-21remove the notion of "root path"; support mixed flash types (do not merge)Doug Zongker1-2/+3
Remove the wacky notion of "roots" and "root paths" (those things that look like "FOO:some/path" instead of just "/foo/some/path"). Let each device specify its own table of available partitions and how to mount them (needed for devices that use both MTD/yaffs2 and EMMC/ext4 partitions). Change-Id: I18b0a572a71c5e087e0b7ae11b1774388339bfd1
2010-08-02Working ASLR implementationHristo Bojinov1-0/+1
Separate files for retouch functionality are in minelf/* ASLR for shared libraries is controlled by "-a" in ota_from_target_files. Binary files are self-contained. Retouch logic can recover from crashes. Signed-off-by: Hristo Bojinov <hristo@google.com> Change-Id: I76c596abf4febd68c14f9d807ac62e8751e0b1bd
2010-06-30support userdata and cache partitions using emmc/ext4 instead of mtd/yaffsDoug Zongker1-1/+8
Change-Id: I827af624c9ec7c64decb702de8c0310cf19b4141
2010-04-02DO NOT MERGEOscar Montemayor1-1/+1
Encrypted File Systems integration. Recovery changes. Change-Id: I932f73a6f937aac061128e1134eab08c30f0471d
2010-03-27DO NOT MERGEOscar Montemayor1-2/+1
Removing unused recovey options. Please refer to Bug#2502219 for more info. Change-Id: I2fe3cdb0c8b93ed7e1cc4093824fbe181f5f0aea
2010-03-15Encrypted File Systems part 3. Recovery changes.Oscar Montemayor1-1/+1
Change-Id: I932f73a6f937aac061128e1134eab08c30f0471d
2010-02-18relocate applypatch; add type system and new functions to edifyDoug Zongker1-0/+1
- Move applypatch to this package (from build). - Add a rudimentary type system to edify: instead of just returning a char*, functions now return a Value*, which is a struct that can carry different types of value (currently just STRING and BLOB). Convert all functions to this new scheme. - Change the one-argument form of package_extract_file to return a Value of the new BLOB type. - Add read_file() to load a local file and return a blob, and sha1_check() to test a blob (or string) against a set of possible sha1s. read_file() uses the file-loading code from applypatch so it can read MTD partitions as well. This is the start of better integration between applypatch and the rest of edify. b/2361316 - VZW Issue PP628: Continuous reset to Droid logo: framework-res.apk update failed (CR LIBtt59130) Change-Id: Ibd038074749a4d515de1f115c498c6c589ee91e5
2010-02-03bump updater API version to 3; deprecate firmware update commandDoug Zongker1-2/+1
Remove support for the HTC-specific "firmware" update command and the corresponding edify function write_firmware_update(). This functionality is now done by an edify extension library that lives in vendor/htc. Change-Id: I80858951ff10ed8dfff98aefb796bef009e05efb
2009-12-10Recovery changes for Encrypted File Systems.Oscar Montemayor1-8/+9
This change enables/disables the Encrypted file systems feature. It reads some properties form the data partition, wipes the partition out, and then rewrites the proper properties again into the data partition to signal that encrypted FS are enabled.
2009-12-10add a simple unit test for the OTA package verifierDoug Zongker1-0/+16
2009-11-13eclair snapshotJean-Baptiste Queru1-4/+10
2009-07-15remove amendDoug Zongker1-3/+1
Yank all the code to install OTA packages out of the recovery binary itself. Now packages are installed by a binary included in the package (run as a child of recovery), so we can make improvements in the installation process without waiting for a new release to use them.
2009-06-18let the "firmware" command take the file straight from the packageDoug Zongker1-0/+3
To do a firmware-install-on-reboot, the update binary tells recovery what file to install before rebooting. Let this file be specified as "PACKAGE:<foo>" to indicate taking the file out of the OTA package, avoiding an extra copy to /tmp. Bump the API version number to reflect this change.
2009-06-12fix sim build in donut, tooDoug Zongker1-4/+4
2009-06-12fix simulator build by excluding more of recoveryDoug Zongker1-3/+4
2009-06-12edify extensions for OTA package installation, part 1Doug Zongker1-0/+2
Adds the following edify functions: mount unmount format show_progress delete delete_recursive package_extract symlink set_perm set_perm_recursive This set is enough to extract and install the system part of a (full) OTA package. Adds the updater binary that extracts an edify script from the OTA package and then executes it. Minor changes to the edify core (adds a sleep() builtin for debugging, adds "." to the set of characters that can appear in an unquoted string).
2009-06-11split out device-specific recovery UI code into vendor directoriesDoug Zongker1-6/+11
Take some device-specific details of the recovery UI (eg, what keys to press to bring up the interface and perform actions, exact text of the menu, etc.) and split them out into separate C functions. Arrange to take implementations of those functions from the appropriate vendor directory at build time. Provide a default implementation in case no vendor-specific one is available.
2009-04-02AI 144132: am: CL 144130 Don't build OTA package keys into the recovery binary; readDoug Zongker1-13/+0
them from an external file in the recovery image. Use the test-keys for all builds. Original author: dougz Merged from: //branches/donutburger/... Automated import of CL 144132
2009-04-02AI 144130: Don't build OTA package keys into the recovery binary; readDoug Zongker1-13/+0
them from an external file in the recovery image. Use the test-keys for all builds. Automated import of CL 144130
2009-03-28AI 143289: am: CL 143128 Use PNG instead of BMP for recovery image icons. This savesDoug Zongker1-1/+1
about 60k from the recovery and system images. Original author: dougz Merged from: //branches/donutburger/... Automated import of CL 143289
2009-03-27AI 143128: Use PNG instead of BMP for recovery image icons. This savesDoug Zongker1-1/+1
about 60k from the recovery and system images. Automated import of CL 143128
2009-03-04auto import from //depot/cupcake/@135843The Android Open Source Project1-0/+60
2009-03-04auto import from //depot/cupcake/@135843The Android Open Source Project1-60/+0
2008-12-18Code drop from //branches/cupcake/...@124589The Android Open Source Project1-0/+3