| Commit message (Collapse) | Author | Files | Lines |
|
https: //source.android.com/setup/contribute/respectful-code
Test: Unit tests pass
Change-Id: If447b2cf923f6bc7a3a3fb5f69b9fbc06a200ebb
|
|
Make sure the simulator succeeds executing common non-A/B update
functions.
Bug: 131911365
Test: run unit tests
Change-Id: I520ce6a8827539b88a9e36f9e67eec30d8b586d4
|
|
Most of the tests in component/ are in fact unit tests. And it doesn't
look practically beneficial to distinguish between the two:
- They have the same test setup;
- We always run both (recovery_unit_test and recovery_component_test)
at the same time;
- Breaking any of them would be equally bad.
This CL merges the tests in recovery_component_test into
recovery_unit_test to save the effort to maintain both.
Test: Run recovery_unit_test on marlin (via `adb sync data`).
Test: `atest recovery_unit_test`
Change-Id: I93ff32e7219cd83425a4bcfe5613978a8dd48d75
|
|
Test: compile
Bug: 119313545
Change-Id: I664fb32522d01909c603d7b903475c4e9aea9223
|
|
The imgpatch will fail on empty deflates because the bspatch won't call
the sink function if the target length is zero.
Instead of compressing an empty string, it's cleaner to not generate such
empty deflate chunks in the patch. Therefore, we can just convert the
chunk type to raw if the target length is smaller than the patch data.
Also adjust some unit tests and add the testdata gzipped_source &
gzipped_target. These two files are ~1K each and are generated by
gzipping two slightly different regular files.
Bug: 79265132
Test: unit tests pass, imgpatch applys successfully on the given src/tgt
Change-Id: I6bfff3251918137f6762a6f9e9551642371a1124
|
|
In the split mode of imgdiff, we used to assume that the size of a split
target chunk is always greater than the blocksize i.e. 4096. This may
lead to the following assertion failure:
I0221 04:57:33.451323 818464 common.py:205 imgdiff F 02-21 04:57:33 821203 821203 imgdiff.cpp:999]
Check failed: tgt_size >= BLOCK_SIZE (tgt_size=476, BLOCK_SIZE=4096)
This CL removes the assumption and handles the edge cases.
Test: generate and verify the incremental update for TFs in the bug; unit test passes
Bug: 73757557
Bug: 73711365
Change-Id: Iadbb4ee658995f5856cd488f3793980881a59620
|
|
~TemporaryDir() calls rmdir(2) directly, which works with empty
directories only.
Test: Run recovery_host_test; No leftover on host.
Test; Run recovery_component_test on marlin; No leftover on device.
Change-Id: Ib510efb16eeda61b34161e2b386499e6cb79a4ca
|
|
As we construct the deflate entries of the target zip file with
random data, the total size of the zip file may vary from case
to case. This leads to occasional failures in the split test for
deflate large apk files. This CL fixes the issue by adding two static
zip files in the testdata instead of generating them dynamically.
Bug: 67849209
Test: run the deflate_large_test repeatedly
Change-Id: Iaeffad9205adefa10c9f62f9f088c33c4360a650
|
|
To avoid closing the same FD twice.
Test: recovery_component_test && recovery_host_test
Change-Id: I95195be8109101081410e9224efda535b2560e72
|
|
Since it has grown much larger, users of the header shouldn't compile
and carry their full copies.
Also add missing header includes in imgdiff.cpp and imgdiff_test.cpp.
Test: mmma bootable/recovery
Test: recovery_unit_test; recovery_component_test; recovery_host_test
Change-Id: I88ca54171765e5606ab0d61580fbc1ada578fd7d
|
|
Add a mandatory option in imgdiff to write the split info (i.e.
patch_size, tgt_size, src_ranges) to file when handling large apks.
Therefore, the caller of imgdiff can create split transfers based on
the info.
Bug: 63542719
Test: unit tests pass
Change-Id: I853d55d1f999fd576474faa81077f7307f4d856d
|
|
Test: unit tests pass
Change-Id: If884e805ccd4df73671ab3436eb90860786ff6c9
|
|
Due to the cache size limit for OTA generation, we used to split large
zip files linearly into pieces and do bsdiff on them. As a result, i) we
lose the advantage of imgdiff; ii) if there's an accidental order change
of some huge files inside the zip, we'll create an insanely large patch.
This patch splits the src&tgt more smartly based on the zip entry_name.
If the entry_name is empty or no matching source is found for a target
chunk, we'll skip adding its source and later do a bsdiff against the
whole split source image (this rarely happens in our use cases except
for the metadata inside a ziparchive).
After the split, the target pieces are continuous and block aligned,
while the sources pieces are mutually exclusive. (Some of the source
blocks may not be used if there's no matching entry_name in the target.)
Then we will generate patches accordingly between each split image
pairs.
Afterwards, if we apply imgpatch to each pair of split source/target
images and add up the patched result, we can get back the original
target image.
For example:
Input: [src_image, tgt_image]
Split: [src-0,tgt-0; src-1,tgt-1, src-2,tgt-2]
Diff: [ patch-0; patch-1; patch-2]
Patch: [(src-0,patch-0)=tgt-0; (src-1,patch-1)=tgt-1;
(src-2,patch-2)=tgt-2;]
Append: [tgt-0 + tgt-1 + tgt-2 = tgt_image]
Peformance:
For the small package in b/34220646, we decrease the patch size of
chrome.apk dramatically from 30M to 400K due to the order change of
two big .so files.
On two versions of angler, I also observe decent patch size decrease.
For chrome.apk, we reduced the size from 5.9M to 3.2M; and for
vevlet.apk from 8.0M to 6.5M.
Bug: 34220646
Test: recovery component test && apply imgdiff & imgpatch on two
chrome.apk
Change-Id: I145d802984fa805efbbac9d01a2e64d82ef9728b
|
|
In a rare case, a random chunk will pass both the gzip header check
and the inflation process; but fail the uncompressed length check in the
footer. This leads to a imgdiff failure. So, we should treat this chunk
as 'normal' instead of 'inflated' while generating the patch.
Bug: 63334984
Test: imgdiff generates patch successfully on previous failing images.
Change-Id: Ice84f22d3653bce9756bda91e70528c0d2f264a0
|
|
This will help us to identify the patch corruption.
Meanwhile fix a wrong size parameter passed to bspatch.
(patch->data.size() into patch->data.size() - patch_offset).
Also remove the only usage of "ApplyBSDiffPatchMem()" and inline its
Sink function for simplicity.
Bug: 37855643
Test: Prints SHA1 for corrupted patch in imgdiff_test.
Change-Id: Ibf2db8c08b0ded1409bb7c91a3547a6bf99c601d
|
|
Test: mmma bootable/recovery system/update_engine
Test: recovery_component_test
Change-Id: I93c2caa87bf94a53509bb37f98f2c02bcadb6f5c
|
|
Mostly for applypatch family APIs like ApplyBSDiffPatch() and
ApplyImagePatch(). Changing to size_t doesn't indicate they would
necessarily work with very large size_t (e.g. > ssize_t), just
similar to write(2). But otherwise accepting negative length doesn't
make much sense.
Also change the return type of SinkFn from ssize_t to size_t. Callers
tell a successful sink by comparing the number of written bytes against
the desired value. Negative return values like -1 are not needed. This
also makes it consistent with bsdiff::bspatch interface.
Test: recovery_component_test
Test: Apply an incremental with the new updater.
Change-Id: I7ff1615203a5c9854134f75d019e266f4ea6e714
|
|
Also remove the utils in applypatch and replace them with the
corresponding libbase functions.
Test: recovery tests pass.
Change-Id: I77254c141bd3e7d3d6894c23b60e866009516f81
|
|
Put ImageChunk and some helper functions into a class. Also switch to
using std::vector instead of malloc.
Bug: 18606652
Test: imgdiff_test passed on host. Also generate a complete incremental OTA package.
The file content is the same and time consumption is similar.
Change-Id: Id603ada4e130ef521218400761a119001a86ca79
|
|
When the input image ends with the magic value sequence of 0x1f, 0x8b,
0x0b (optionally with 0x00), the image parsing code will be stuck in an
infinite loop.
Test: recovery_component_test passes.
Change-Id: Ie3629dfdc41360387b19cc3e0359c95ae4fb998e
|
|
Factor out libimgdiff static library for testing purpose.
This CL adds the imgdiff tests on host and on target both (similar to
libimgpatch). In practice, we only need imgdiff binary on host, and
libimgpatch on target. But they should build and pass tests on both
platforms.
Test: recovery_host_test passes; recovery_component_test passes.
Change-Id: I0eafb7faf727cdf70066310e845af6ee245d4f60
|