#!/sbin/sh

# do logging, if not excluded with -x
LOGFILE="/data/sdparted.log"
[ "$1" != "-x" ] && echo "$0" "$@" >> "$LOGFILE" && "$0" -x "$@" 2>&1 | tee -a "$LOGFILE" && exit
shift

ShowError() { echo ; echo " err: $1" ; echo ; exit 1 ; }

ShowMessage() { echo ; echo " msg: $1" ; }

ShowHelp() {

cat <<DONEHELP

$SCRIPTNAME v$SCRIPTREV created by $MYNAME

if you use this script in your work, please give some credit. thanks.

requirements: cm-recovery-v1.4

usage: $SCRIPTNAME [options]


options:

 --fatsize|-fs SIZE[MG]     set the size of the fat32 partition to <SIZE>.
                            default=total sdcard size - (ext + swap)
						
 --extsize|-es SIZE[MG]     set the size of the ext partition to <SIZE>.
                            default=$EXTSIZE
						
 --swapsize|-ss SIZE[MG]    set the size of the swap partition to <SIZE>.
                            if set to 0, no swap partition will be created.
                            default=$SWAPSIZE
						
 --extfs|-efs TYPE          set the filesystem of ext partition to <TYPE>.
                            valid types=ext2, ext3, ext4
                            default=$EXTFS


 --upgradefs|-ufs TYPE      upgrades existing ext partition to <TYPE>.
                            this operation will NOT wipe your sdcard and
                            cannot be used with any partition creation options.
                            valid types=ext3, ext4

 --downgradefs|-dfs TYPE    downgrades existing ext partition to <TYPE>.
                            this operation will NOT wipe your sdcard and
                            cannot be used with any partition creation options.
                            valid types=ext2

							
 --interactive|-i           interactive mode

 --help|-h                  display this help

 --printonly|-po            display sdcard information

 --silent|-s                do not prompt user, not even initial warning.


examples:
 $SCRIPTNAME                     creates swap=$SWAPSIZE ext2=$EXTSIZE fat32=remaining free space
 $SCRIPTNAME -efs ext4           creates swap=$SWAPSIZE ext4=$EXTSIZE fat32=remaining free space
 $SCRIPTNAME -fs 1.5G -efs ext3  creates swap=$SWAPSIZE ext3=$EXTSIZE fat32=1536
 $SCRIPTNAME -es 256M -ss 0      creates no swap ext2=256 fat32=remaining free space
 $SCRIPTNAME -ufs ext4           upgrades ext partition to ext4

DONEHELP

}

UserAbort() {
	
	WHILEEXIT=

	while [ -z "$WHILEEXIT" ]
	do
		echo -n "do you want to continue? (Y/n) "
		read response
		echo
		[ "$response" = "Y" ] || [ "$response" = "n" ] || [ "$response" = "N" ] && WHILEEXIT="$response"
	done
	
	echo "$response" > /dev/null 2>&1 >>"$LOGFILE"
	
	[ "$response" != "Y" ]
	
}

UnmountAll () {

	# unmount all partitions so we can work with $SDPATH
	# i'm assuming no more than 3 partitions
	# maybe make a little more elegant later
	echo -n "unmounting all partitions..."
	umount "$FATPATH" > /dev/null 2>&1 >>"$LOGFILE"
	umount "$EXTPATH" > /dev/null 2>&1 >>"$LOGFILE"
	umount "$SWAPPATH" > /dev/null 2>&1 >>"$LOGFILE"
	echo "done"
	echo
	
}


CheckReqs() {

	echo -n "checking script requirements..."
	# check for valid sdcard
	[ -e $SDPATH ] || ShowError "$SDPATH does not exist!"
	
	# look for necessary programs
	[ -e $CMPARTED ] || ShowError "$CMPARTED does not exist!"
	[ -e $CMTUNE2FS ] || ShowError "$CMTUNE2FS does not exist!"
	[ -e $CME2FSCK ] || ShowError "$CME2FSCK does not exist!"
	
	# verify cm-v1.4
	PARTEDREV=`"$CMPARTED" "$SDPATH" version | grep Parted | cut -d" " -f3`
	[ "$PARTEDREV" == "1.8.8.1.179-aef3" ] || ShowError "you are not using parted v1.8.8.1.179-aef3!"
	echo "done"
	echo
	
}

CheckTableType() {

	TABLETYPE=`"$CMPARTED" "$SDPATH" print | grep Table: | cut -d" " -f3`
	
	[ "$TABLETYPE" == "loop" -o "$TABLETYPE" == "msdos" ] && TTISOK=1 || TTISOK=0
	[ "$TABLETYPE" == "loop" ] && TTISLOOP=1 || TTISLOOP=0
	[ "$TABLETYPE" == "msdos" ] && TTISMSDOS=1 || TTISMOSDOS=0
	
}

ValidateExtArg() {

	FUNC_RET="nonzero"
		
	# validating argument
	[ "$1" != "ext2" ] && [ "$1" != "ext3" ] && [ "$1" != "ext4" ] && FUNC_RET=
		
	[ -z "$FUNC_RET" ] && [ -z "$IMODE" ] && ShowError "$1 is not a valid filesystem."
	[ -z "$FUNC_RET" ] && [ -n "$IMODE" ] && ShowMessage "$1 is not a valid filesystem."
	
	# return valid argument
	[ -n "$FUNC_RET" ] && FUNC_RET="$1"
	
}

ValidateSizeArg() {

	# check for zero-length arg to protect expr length
	[ -z "$1" ] && ShowError "zero-length argument passed to size-validator"
		
	SIZEMB=
	ARGLEN=`expr length $1`
	SIZELEN=$(($ARGLEN-1))
	SIZEARG=`expr substr $1 1 $SIZELEN`
	SIZEUNIT=`expr substr $1 $ARGLEN 1`
	
	# check if SIZEARG is an integer
	if [ $SIZEARG -eq $SIZEARG 2> /dev/null ] ; then
		# look for G
		[ "$SIZEUNIT" == "G" ] && SIZEMB=$(($SIZEARG * 1024))
		# look for M
		[ "$SIZEUNIT" == "M" ] && SIZEMB=$SIZEARG
		# no units on arg AND prevents using bogus size units
		[ -z "$SIZEMB" ] && [ $SIZEUNIT -eq $SIZEUNIT 2> /dev/null ] && SIZEMB=$1
	# check if SIZEARG is a floating point number, GB only
	elif [ `expr index "$SIZEARG" .` != 0 ] && [ "$SIZEUNIT" == "G" ]  ; then
		INT=`echo "$SIZEARG" | cut -d"." -f1`
		FRAC=`echo "$SIZEARG" | cut -d"." -f2`
		SIGDIGITS=`expr length $FRAC`
		
		[ -z "$INT" ] && INT=0
		INTMB=$(($INT * 1024))
		FRACMB=$((($FRAC * 1024) / (10**$SIGDIGITS)))
		SIZEMB=$(($INTMB + $FRACMB))
	# it's not a valid size
	else
		[ -z "$IMODE" ] && ShowError "$1 is not a valid size"
	fi
	
	[ -z "$SIZEMB" ] && [ -n "$IMODE" ] && ShowMessage "$1 is not a valid size"
	
	# return valid argument in MB
	FUNC_RET=$SIZEMB
	
}

CalculatePartitions() {

	# get size of sdcard in MB & do some math
	SDSIZEMB=`"$CMPARTED" "$SDPATH" unit MB print | grep $SDPATH | cut -d" " -f3`
	SDSIZE=${SDSIZEMB%MB}
	[ -n "$FATSIZE" ] || FATSIZE=$(($SDSIZE - $EXTSIZE - $SWAPSIZE))
	EXTEND=$(($FATSIZE + $EXTSIZE))
	SWAPEND=$(($EXTEND + $SWAPSIZE))
	
	# check for fatsize of 0
	[ $FATSIZE -le 0 ] && ShowError "must have a fat32 partition greater than 0MB"
	
	# check for zero-length sdsize...
	# indicative of parted not reporting length 
	# correctly b/c of error on sdcard
	[ -z "$SDSIZE" ] && ShowError "zero-length argument passed to partition-calculator"
	
	# make sure we're not being asked to do the impossible
	[ $(($FATSIZE + $EXTSIZE + $SWAPSIZE)) -gt $SDSIZE ] && [ -z "$IMODE" ] && ShowError "sum of requested partitions is greater than sdcard size"

}


UpgradeDowngradeOnly() {

	if [ -n "$UEXTFSONLY" ] ; then
		echo
		[ -n "$CREATEPART" ] && ShowError "cannot use upgrade option when creating partitions, use -efs instead"
		[ -n "$DEXTFSONLY" ] && ShowError "cannot upgrade AND downgrade, it just doesn't make sense"
		echo "you have chosen to upgrade $EXTPATH to $UEXTFSONLY."
		echo "this action will NOT delete any data from sdcard."
		echo
		[ -z "$SILENTRUN" ] &&	UserAbort && ShowError "script canceled by user"
		echo
		UpgradeExt "$UEXTFSONLY"
		ShowCardInfo
	elif [ -n "$DEXTFSONLY" ] ; then
		echo
		[ -n "$CREATEPART" ] && ShowError "cannot use downgrade option when creating partitions."
		[ -n "$UEXTFSONLY" ] && ShowError "cannot downgrade AND upgrade, it just doesn't make sense."
		echo "you have chosen to downgrade $EXTPATH to $DEXTFSONLY."
		echo "this action will NOT delete any data from sdcard."
		echo
		[ -z "$SILENTRUN" ] &&	UserAbort && ShowError "script canceled by user"
		echo
		DowngradeExt "$DEXTFSONLY"
		ShowCardInfo
	fi
	
}

PrepareSdCard() {

	echo
	if [ $TTISOK -eq 0 ] ; then
		echo "partition 1 may not be aligned to cylinder boundaries."
		echo "to continue, this must be corrected."
	elif [ $TTISLOOP -gt 0 ] ; then
		echo "your sdcard's partition table type is $TABLETYPE."
		echo "to continue, partition table must be set to 'msdos'."
	elif [ $TTISMSDOS -gt 0 ] ; then
		# just a reminder..in a later version, 
		# i may implement resizing of partitions, 
		# so this will be unnecessary. but until then...
		echo "to continue, all existing partitions must be removed."
	else
		# this is not good, and should never happen
		# if it does, there is a serious problem
		ShowError "sdcard failed table type check."
	fi
	
	echo
	echo "this action will remove all data from your sdcard."
	echo
	[ -z "$SILENTRUN" ] &&	UserAbort && ShowError "script canceled by user"
	
	[ $TTISOK -eq 0 ] && echo -n "correcting cylinder boundaries..."
	[ $TTISLOOP -gt 0 ] && echo -n "setting partition table to msdos..."
	[ $TTISMSDOS -gt 0 ] && echo -n "removing all partitions..."
	
	"$CMPARTED" -s "$SDPATH" mklabel msdos 2>&1 >>"$LOGFILE"
	echo "done"
	echo
	
}

ShowActions() {

	echo
	echo "total size of sdcard=$SDSIZEMB"
	echo
	echo "the following actions will be performed:"
	echo " -create $FATSIZE""MB fat32 partition"
	[ $EXTSIZE -gt 0 ] && echo " -create $EXTSIZE""MB ext2 partition"
	[ $SWAPSIZE -gt 0 ] && echo " -create $SWAPSIZE""MB swap partition"
	[ "$EXTFS" != "ext2" ] && echo " -ext2 partition will be upgraded to $EXTFS"
	echo
	[ -z "$SILENTRUN" ] &&	UserAbort && ShowError "script canceled by user"
	echo
	
}

ShowCardInfo() {

    echo "sddevice located in /sdcard/sddev.log"
    echo $SDPATH > /sdcard/sddev.log

	CheckTableType
	
	echo
	echo "retrieving current sdcard information..."
	
	if [ $TTISOK -gt 0 ] ; then
		echo
		parted "$SDPATH" print
		echo
		echo "script log is located @ /data/sdparted.log"
		exit 0
	else
		echo
		echo "partition 1 may not be aligned to cylinder boundaries."
		ShowError "cannot complete print operation."
	fi
	echo
	
}


PartitionSdCard() {

	echo "performing selected actions..."
	echo
	
	if [ $FATSIZE -gt 0 ] ; then
		echo -n "creating fat32 partition..."
		"$CMPARTED" -s "$SDPATH" mkpartfs primary fat32 0 "$FATSIZE"MB 2>&1 >>"$LOGFILE"
		echo "done"
	fi
	
	if [ $EXTSIZE -gt 0 ] ; then
		echo -n "creating ext2 partition..."
		"$CMPARTED" -s "$SDPATH" mkpartfs primary ext2 "$FATSIZE"MB "$EXTEND"MB 2>&1 >>"$LOGFILE"
		"$CMTUNE2FS" -L sd-ext "$EXTPATH" 2>&1 >>"$LOGFILE"
		echo "done"
	fi
	
	if [ $SWAPSIZE -gt 0 ] ; then
		echo -n "creating swap partition..."
		"$CMPARTED" -s "$SDPATH" mkpartfs primary linux-swap "$EXTEND"MB "$SWAPEND"MB 2>&1 >>"$LOGFILE"
		echo "done"
	fi
	echo
	
}

UpgradeExt() {

	# check for no upgrade
	[ "$1" == "ext2" ] && return
	# check for ext partition
	[ ! -e "$EXTPATH" ] && ShowError "$EXTPATH does not exist"

	# have to use -m switch for this check b/c parted incorrectly
	# reports all ext partitions as ext2 when running print <number>
	CHECKEXTFS=`"$CMPARTED" -m "$SDPATH" print | grep ext | cut -d":" -f5`
	[ "$CHECKEXTFS" == "$1" ] && ShowError "$EXTPATH is already $1"

	# grabbed the code bits for ext3 from upgrade_fs(credit:cyanogen)
	# check for ext2...must upgrade to ext3 first b4 ext4
	if [ "$1" == "ext3" -o "$1" == "ext4" ] ; then
		echo -n "adding journaling to $EXTPATH..."
		umount /system/sd > /dev/null 2>&1 >>"$LOGFILE"
		"$CME2FSCK" -p "$EXTPATH" 2>&1 >>"$LOGFILE"
		"$CMTUNE2FS" -c0 -i0 -j "$EXTPATH" 2>&1 >>"$LOGFILE"
		echo "done"
	fi

	# and got convert to ext4 from xda-forum(credit:Denkai)
	if [ "$1" == "ext4" ] ; then
		echo -n "converting $EXTPATH to ext4 filesystem..."
		umount /system/sd > /dev/null 2>&1 >>"$LOGFILE"
		"$CMTUNE2FS" -O extents,uninit_bg,dir_index "$EXTPATH" 2>&1 >>"$LOGFILE"
		"$CME2FSCK" -fpDC0 "$EXTPATH" 2>&1 >>"$LOGFILE"
		echo "done"
	fi
	echo
	
}

DowngradeExt() {

	# check for ext partition
	[ ! -e "$EXTPATH" ] && ShowError "$EXTPATH does not exist"

	# have to use print for this check b/c parted incorrectly
	# reports all ext partitions as ext2 when running print <number>
	CHECKEXTFS=`"$CMPARTED" -m "$SDPATH" print | grep ext | cut -d":" -f5`
	[ "$CHECKEXTFS" == "$1" ] && ShowError "$EXTPATH is already $1"
	
	if [ "$CHECKEXTFS" == "ext4" -o "$1" == "ext3" ] ; then
		# interweb says downgrading from ext4 is not possible
		# without a backup/restore procedure.
		# if i figure it out, i'll implement it.
		ShowError "downgrading from ext4 is not currently supported"
	fi
	
	if [ "$1" == "ext2" ] ; then
		echo -n "removing journaling from $EXTPATH..."
		umount /system/sd > /dev/null 2>&1 >>"$LOGFILE"
		"$CMTUNE2FS" -O ^has_journal "$EXTPATH" 2>&1 >>"$LOGFILE"
		"$CME2FSCK" -fp "$EXTPATH" 2>&1 >>"$LOGFILE"
		echo "done"
	fi
	echo
	
}


Interactive() {

cat <<DONEINSTRUCT

sdparted interactive mode

rules:
1. no answer means you accept default value
2. enter '0' for no partition

DONEINSTRUCT

	UserAbort && ShowError "script canceled by user"
	
	CalculatePartitions
	
	GetSwapSize
	
	FATSIZE=
	
	CalculatePartitions
	
	GetExtSize
	
	GetExtType
	
	FATSIZE=
	
	CalculatePartitions
	
	GetFatSize
	
}

GetSwapSize() {

	SWAPTEST=
	
	while [ -z "$SWAPTEST" ]
	do
		echo
		echo -n "swap partition size [default=$SWAPSIZE]: "
		read SWAPRESP
		
		[ -z "$SWAPRESP" ] && SWAPRESP="$SWAPSIZE"
		echo "$SWAPRESP" > /dev/null 2>&1 >>"$LOGFILE"
		
		ValidateSizeArg "$SWAPRESP"
		SWAPTEST="$FUNC_RET"
		[ -n "$SWAPTEST" ] && [ $SWAPTEST -gt $SDSIZE ] && ShowMessage "$SWAPRESP > available space($(($SDSIZE))M)." && SWAPTEST=
	done
	
	SWAPSIZE=$SWAPTEST
	
}

GetExtSize() {

	EXTTEST=
	
	while [ -z "$EXTTEST" ]
	do
		echo
		echo -n "ext partition size [default=$EXTSIZE]: "
		read EXTRESP
		
		[ -z "$EXTRESP" ] && EXTRESP="$EXTSIZE"
		echo "$EXTRESP" > /dev/null 2>&1 >>"$LOGFILE"
		
		ValidateSizeArg "$EXTRESP"
		EXTTEST="$FUNC_RET"
		
		[ -n "$EXTTEST" ] && [ $EXTTEST -gt $(($SDSIZE - $SWAPSIZE)) ] && ShowMessage "$EXTRESP > available space($(($SDSIZE - $SWAPSIZE))M)." && EXTTEST=
	done
	
	EXTSIZE=$EXTTEST
	
}

GetExtType() {

	FSTEST=
	
	while [ -z "$FSTEST" ]
	do
		echo
		echo -n "ext partition type [default=$EXTFS]: "
		read FSRESP
		
		[ -z "$FSRESP" ] && FSRESP="$EXTFS"
		echo "$FSRESP" > /dev/null 2>&1 >>"$LOGFILE"
		
		ValidateExtArg "$FSRESP"
		FSTEST="$FUNC_RET"
	done
	
	EXTFS="$FSTEST"
	
}

GetFatSize() {

	FATTEST=
	
	while [ -z "$FATTEST" ]
	do
		echo
		echo -n "fat partition size [default=$FATSIZE]: "
		read FATRESP
		
		[ -z "$FATRESP" ] && FATRESP="$FATSIZE"
		echo "$FATRESP" > /dev/null 2>&1 >>"$LOGFILE"
		
		ValidateSizeArg "$FATRESP"
		FATTEST="$FUNC_RET"
		
		[ -n "$FATTEST" ] && [ $FATTEST -gt $FATSIZE ] && ShowMessage "$FATRESP > available space($(($SDSIZE - $SWAPSIZE - $EXTSIZE))M)." && FATTEST=
		[ -n "$FATTEST" ] && [ $FATTEST -le 0 ] && ShowMessage "must have a fat32 partition greater than 0MB" && FATTEST=
	done
	
	FATSIZE=$FATTEST
	
}


SCRIPTNAME="sdparted"
SCRIPTREV="0.6"
MYNAME="51dusty"

IMODE=
SILENTRUN=
CREATEPART=
FUNC_RET=

UEXTFSONLY=
DEXTFSONLY=

TTISOK=
TTISLOOP=
TTISMSDOS=

SDSIZE=
SDSIZEMB=
SDINFO=$(cat /etc/fstab | grep /sdcard | awk '{print $1}')
if [ -L "$SDINFO" ]
then
	SDPATH=$(ls -l $SDINFO | awk '{print $11}')
else
	SDPATH=$SDINFO
fi
# we may now have an SDPATH, let's make sure its on mmcblkX or mmcblkXp1
CHECK_SDPATH1=$(echo $SDPATH | grep mmcblk.$)
CHECK_SDPATH2=$(echo $SDPATH | grep mmcblk.p1$)
if [ -z "$CHECK_SDPATH1" ]
then
	if [ -z "$CHECK_SDPATH2" ]
	then
		echo fail1
		unset SDPATH
	else
		LEN=${#SDPATH}
		BLKLEN=$(expr $LEN - 2)
		SDPATH=${SDPATH:0:$BLKLEN}
	fi
fi


FATSIZE=
FATTYPE="fat32"
FATPATH=$SDPATH"p1"

EXTSIZE=512
EXTFS="ext2"
EXTPATH=$SDPATH"p2"
EXTEND=

SWAPSIZE=32
SWAPTYPE="linux-swap"
SWAPPATH=$SDPATH"p3"
SWAPEND=

CMPARTED="/sbin/parted"
CMTUNE2FS="/sbin/tune2fs"
CME2FSCK="/sbin/e2fsck"

# give the output some breathing room
echo "$SCRIPTREV" >> "$LOGFILE" 
echo

# check for arguments
while [ $# -gt 0 ] ; do
  case "$1" in

    -h|--help) ShowHelp ; exit 0 ;;
    
    -fs|--fatsize) shift ; ValidateSizeArg "$1" ; FATSIZE="$FUNC_RET" ; CREATEPART="$1" ;;
    -es|--extsize) shift ; ValidateSizeArg "$1" ; EXTSIZE="$FUNC_RET" ; CREATEPART="$1" ;;
	-ss|--swapsize) shift ; ValidateSizeArg "$1" ; SWAPSIZE="$FUNC_RET" ; CREATEPART="$1" ;;
	-efs|--extfs) shift ; ValidateExtArg "$1" ; EXTFS="$FUNC_RET" ; CREATEPART="$1" ;;
	
	-ufs|--upgradefs) shift ; ValidateExtArg "$1" ; UEXTFSONLY="$FUNC_RET" ;;
	-dfs|--downgradefs) shift ; ValidateExtArg "$1" ; DEXTFSONLY="$FUNC_RET" ;;
	
	-i|--interactive) IMODE="$1" ;;
	
	-s|--silent) SILENTRUN="$1" ;;
	
	-po|--printonly) ShowCardInfo ;;
	
	*) ShowHelp ; ShowError "unknown argument '$1'" ;;

  esac
  shift
done

# can't do silent when in interactive mode
[ -n "$IMODE" ] && SILENTRUN=

# make sure sdcard exists and all needed files are here
CheckReqs

# unmount all
UnmountAll

# upgrade only? downgrade only?
UpgradeDowngradeOnly

# check table
CheckTableType

# prep card
PrepareSdCard

# check for interactive mode
[ -n "$IMODE" ] && Interactive

# do some math
CalculatePartitions

# last chance to cancel
ShowActions

# partition card
PartitionSdCard

# upgrade fs if necessary
UpgradeExt "$EXTFS"

# say goodbye and show print output
ShowCardInfo