summaryrefslogtreecommitdiffstats
path: root/converter
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--converter/cConvert.cpp238
-rw-r--r--converter/cNBTData.cpp74
-rw-r--r--converter/cNBTData.h12
-rwxr-xr-xconverter/denotchbin169472 -> 165672 bytes
-rw-r--r--converter/quicksort.cpp88
-rw-r--r--converter/quicksort.h9
-rw-r--r--converter/timer.cpp9
-rw-r--r--converter/timer.h8
8 files changed, 210 insertions, 228 deletions
diff --git a/converter/cConvert.cpp b/converter/cConvert.cpp
index e31730bf3..445d38796 100644
--- a/converter/cConvert.cpp
+++ b/converter/cConvert.cpp
@@ -1,4 +1,3 @@
-// reading a complete binary file
#include <iostream>
#include <fstream>
#include <string>
@@ -6,14 +5,9 @@
#include <string.h>
#include <ctype.h>
#include "zlib.h"
-#include <time.h>
#include "cNBTData.h"
-
-void quicksort(int*, int, int);
-int partition(int*, int, int, int);
-int median3(int*,int,int);
-void swap(int &, int &);
-double diffclock(clock_t, clock_t);
+#include "timer.h"
+#include "quicksort.h"
using namespace std;
@@ -48,9 +42,9 @@ int main () {
unsigned char byte1 = 0;
unsigned char byte2 = 0;
unsigned char byte3 = 0;
- unsigned char byte4 = 0;
- unsigned char byte5 = 0;
- unsigned char trash = 0;
+ unsigned char byte4 = 0;
+ unsigned char byte5 = 0;
+ unsigned char trash = 0;
unsigned int frloc = 0;
int toffset = 0;
int compdlength = 0;
@@ -72,7 +66,7 @@ int main () {
toffset = 4096 * ((byte1*256*256) + (byte2*256) + byte3);//find the chunk offsets using the first three bytes of each long;
toffarr[i] = toffset;//array of chunk offset locatiosn in the fle.
}
- for ( short i = 0; i < 4096; i++ ) {//loop through next 4096 bytes of the header.
+ for ( short i = 0; i < 4096; i++ ) {//loop through next 4096 bytes of the header.
//keeping this code here in case we need it later. not using it right now.
if( fread( &trash, sizeof(byte4), 1, f) != 1 ) { cout << "ERROR 2jkd READING FROM FILE " << SourceFile; fclose(f); return false; }
}
@@ -80,65 +74,38 @@ int main () {
quicksort(toffarr, 0, 1023); //sort the array from smallest to larget offset locations so we only have to read through the file once.
for ( short ia = 0; ia < 1024; ia++ ) {//a region file can hold a maximum of 1024 chunks (32*32)
+ if (ia == 31) { ia++; }
if (toffarr[ia] < 8192) { //offsets of less than 8192 are impossible. 0 means there is no chunk in a particular location.
if (toffarr[ia] > 0) { cout << "ERROR 2s31 IN COLLECTED CHUNK OFFSETS " << toffarr[ia]; fclose(f); return false; } //values between 0 and 8192 should be impossible.
//This file does not contain the max 1024 chunks, skip until we get to the first
} else { // found a chunk offset value
//Chunk data begins with a (big-endian) four-byte length field which indicates the exact length of the remaining chunk data in bytes. The following byte indicates the compression scheme used for chunk data, and the remaining (length-1) bytes are the compressed chunk data.
+ printf("Working on chunk %i\n", ia);
if( fread( &byte1, sizeof(byte1), 1, f) != 1 ) { cout << "ERROR 2t32 READING FROM FILE " << SourceFile; fclose(f); return false; }
if( fread( &byte2, sizeof(byte2), 1, f) != 1 ) { cout << "ERROR 2y51 READING FROM FILE " << SourceFile; fclose(f); return false; }
if( fread( &byte3, sizeof(byte3), 1, f) != 1 ) { cout << "ERROR 3424 READING FROM FILE " << SourceFile; fclose(f); return false; }
if( fread( &byte4, sizeof(byte4), 1, f) != 1 ) { cout << "ERROR sd22 READING FROM FILE " << SourceFile; fclose(f); return false; }
compdlength = ((byte1*256*256*256) + (byte2*256*256) + (byte3*256) + byte4 - 0); //length of compressed chunk data
if( fread( &byte5, sizeof(byte5), 1, f) != 1 ) { cout << "ERROR 2341 READING FROM FILE " << SourceFile; fclose(f); return false; } //compression type, 1 = GZip (RFC1952) (unused in practice) , 2 = Zlib (RFC1950)
- //printf("byte1: %x \n", byte1);
- //printf("byte2: %x \n", byte2);
- //printf("byte3: %x \n", byte3);
- //printf("byte4: %x \n", byte4);
-
- frloc += 5; //moved ahead 5 bytes while reading data.
- //cout << compdlength << endl; return 1;
- //unsigned char* comp_data = new unsigned char[ compdlength ];
- //cout << "size of comp_data: " << compdlength << endl;
- //cout << "size of comp_data2: " << sizeof(comp_data) << endl;
- //fread( comp_data, sizeof(unsigned char), compdlength, f);
- //if( fread( &comp_data, sizeof(unsigned char), compdlength, f) != 1 ) { cout << "ERROR 1234 READING FROM FILE " << SourceFile; fclose(f); return false; } //actual compressed chunk data
- //cout << "frloc: " << frloc << endl;
+ //printf("byte1: %i\n", byte1);
+ //printf("byte2: %i\n", byte2);
+ //printf("byte3: %i\n", byte3);
+ //printf("byte4: %i\n", byte4);
+ //printf("byte5: %i\n", byte5);
+ frloc += 5; //moved ahead 5 bytes while reading data.
// TODO - delete [] temparr after you're done with it, now it's a memory leak
- char* temparr = new char[compdlength]; //can't get fread to read more than one char at a time into a char array... so that's what I'll do. :( At least it works.
- if( fread( temparr, compdlength, 1, f) != 1 ) { cout << "ERROR rf22 READING FROM FILE " << SourceFile; fclose(f); return false; }
+ char* compBlockData = new char[compdlength]; //can't get fread to read more than one char at a time into a char array... so that's what I'll do. :( At least it works.
+ if( fread( compBlockData, compdlength, 1, f) != 1 ) { cout << "ERROR rf22 READING FROM FILE " << SourceFile; fclose(f); return false; }
frloc = frloc + compdlength;
- /*
- int re = 0;
- char tempbyte = 0;
- while (re < compdlength) { //loop through file and read contents into char array a byte at a time.
- if( fread( &tempbyte, sizeof(tempbyte), 1, f) != 1 ) { cout << "ERROR rf22 READING FROM FILE " << SourceFile; fclose(f); return false; }
- temparr[re] = tempbyte;
- re++;
- frloc++;
- }
-
- */
- //if( fread( comp_data, compdlength, sizeof(unsigned char), f) != 1 ) { cout << "ERROR 1234 READING FROM FILE " << SourceFile <<endl; fclose(f); return false; } //actual compressed chunk data
- //frloc += compdlength;
- //cout << "frloc: " << frloc << endl;
- //return 1;
- //cout << deflateBound(&comp_data,compdlength) << endl;
uLongf DestSize = 98576;// uncompressed chunks should never be larger than this
- //cout << "echo1: " << DestSize << endl;
+
char* BlockData = new char[ DestSize ];
- //return 1;
- //cout << "size of comp_data1: " << sizeof(comp_data) << endl;
- //int errorcode = uncompress( (Bytef*)BlockData, &DestSize, (Bytef*)comp_data, compdlength );
- int errorcode = uncompress( (Bytef*)BlockData, &DestSize, (Bytef*)temparr, compdlength ); //DestSize will update to the actual uncompressed data size after this opperation.
- //cout << "echo2: " << DestSize << endl;
- //cout << "echo3: " << errorcode << endl;
- //cout << "size of Block data: " << sizeof(BlockData) << endl;
- //int errorcode = 1;
+
+ int errorcode = uncompress( (Bytef*)BlockData, &DestSize, (Bytef*)compBlockData, compdlength ); //DestSize will update to the actual uncompressed data size after this opperation.
int testr = (int)DestSize; //testing something, can't remember what.
if( errorcode != Z_OK ){
printf("ERROR: Decompressing chunk data! %i", errorcode );
@@ -158,45 +125,49 @@ int main () {
};
}
- //cout << "1" << endl;
- //cout << comp_data << endl;
- //return 0;
-
-
- //playing with FakeTruth's NBT parser. (unsuccessfully)
- //string BlockDataString(BlockData);
- //memcpy (BlockDataString,BlockData,strlen(BlockData)+1);
- //BlockDataString = BlockData;
- //cNBTCompound* NBTCompound = new cNBTCompound( 0, 0 );
- //cout << cNBTData(BlockData, DestSize)->cNBTCompound << endl;
- //cout << BlockDataString << endl;
//testing of nbtparser.
cNBTData* NBTData = new cNBTData(BlockData, (testr));
- //NBTData->m_bDecompressed = true;
NBTData->ParseData();
- NBTData->PrintData();
-
- //NBTData->GetByteArray("Blocks");
- //for(unsigned int i = 0; i < 111; i++) {//re
- //printf("Blocks?: %i\n", NBTData->cNBTCompound::GetByteArray("Blocks")[0]);
- NBTData->OpenCompound("");
- NBTData->OpenCompound("Level"); // You need to open the right compounds before you can access the data in it
- printf("xPos: %i\n", NBTData->GetInteger("xPos") );
- //will print
- //xPos: 0
- printf("test: %i\n", NBTData->GetByteArray("Blocks")[0] );
+ //NBTData->PrintData();
+ NBTData->OpenCompound("");
+ NBTData->OpenCompound("Level"); // You need to open the right compounds before you can access the data in it
+
+ //NBT Data for blocks should look something like this:
+ //==== STRUCTURED NBT DATA ====
+ // COMPOUND ( )
+ // COMPOUND
+ // COMPOUND (Level)
+ // LIST (Entities)
+ // LIST (TileEntities)
+ // INTEGER LastUpdate (0)
+ // INTEGER xPos (0)
+ // INTEGER zPos (0)
+ // BYTE TerrainPopulated (1)
+ // BYTE ARRAY BlockLight (length: 16384)
+ // BYTE ARRAY Blocks (length: 32768)
+ // BYTE ARRAY Data (length: 16384)
+ // BYTE ARRAY HeightMap (length: 256)
+ // BYTE ARRAY SkyLight (length: 16384)
+ //=============================
+
+
+ for(unsigned int i = 0; i < 16384; i++) {
+ //printf("array HM: %i\n", NBTData->GetByteArray("HeightMap")[i]);
+ }
+ for(unsigned int i = 0; i < 32768; i++) {
+ //printf("array Blocks: %i\n", NBTData->GetByteArray("Blocks")[i]);
+ }
+
+ //printf("xPos: %i\n", NBTData->GetInteger("xPos") );
NBTData->CloseCompound();// Close the compounds after you're done
NBTData->CloseCompound();
- //}
- return 1;
+
fwrite( BlockData, DestSize, 1, wf ); //write contents of uncompressed block data to file to check to see if it's valid... It is! :D
- //fwrite( &temparr, compdlength, sizeof(unsigned char), wf );
- //cin >> n; //just to see screen output
- //delete [] comp_data;
- //return 0;
+ delete [] compBlockData;
delete [] BlockData;
+
while ( (frloc < toffarr[ia+1]) && (ia<1023) ) { //loop through Notch's junk data until we get to another chunk offset possition to start the loop again
if( fread( &trash, sizeof(byte4), 1, f) != 1 ) { cout << "ERROR 2nkd READING FROM FILE " << SourceFile; fclose(f); return false; }
frloc ++;
@@ -206,18 +177,7 @@ int main () {
//if (ia == 30) { break; }
}
//return 0;
-/*
- for( short i = 0; i < 1024 ; ++i ) {
- if( fread( &byte1, sizeof(byte1), 1, f) != 1 ) { cout << "ERROR READING FROM FILE " << SourceFile; fclose(f); return false; }
- if( fread( &byte2, sizeof(byte2), 1, f) != 1 ) { cout << "ERROR READING FROM FILE " << SourceFile; fclose(f); return false; }
- if( fread( &byte3, sizeof(byte3), 1, f) != 1 ) { cout << "ERROR READING FROM FILE " << SourceFile; fclose(f); return false; }
- if( fread( &byte4, sizeof(byte4), 1, f) != 1 ) { cout << "ERROR READING FROM FILE " << SourceFile; fclose(f); return false; }
-
- }
- //printf("value: %x \n",trash);
-
-*/
for ( short i = 0; i < 1024; i++ ) {
//cout << toffarr[i] << endl;
}
@@ -238,95 +198,3 @@ int main () {
}
-
-
-double diffclock(clock_t clock1,clock_t clock2)
-{
- double diffticks=clock1-clock2;
- double diffms=(diffticks*10)/CLOCKS_PER_SEC;
- return diffms;
-}
-
-// Quicksort controller function, it partitions the different pieces of our array.
-void quicksort(int *arIntegers, int left, int right)
-{
-/* cout << "quicksort ([" << arIntegers[0] << ","
- << arIntegers[1] << ","
- << arIntegers[2] << ","
- << arIntegers[3] << ","
- << arIntegers[4] << ","
- << arIntegers[5] << ","
- << arIntegers[6] << "],"
- << left << ","
- << right << ")\n";
-*/
- if (right > left)
- {
- int pivotIndex = median3(arIntegers,left,right);
- int pivotNewIndex = partition(arIntegers, left, right, pivotIndex);
-
- // Recursive call to quicksort to sort each half.
- quicksort(arIntegers, left, pivotNewIndex-1);
- quicksort(arIntegers, pivotNewIndex+1, right);
- }
-}
-
-int median3(int *arIntegers,int left,int right)
-{
- int center = (left+right)/2;
-
- if(arIntegers[center] < arIntegers[left])
- swap(arIntegers[left],arIntegers[center]);
- if(arIntegers[right] < arIntegers[left])
- swap(arIntegers[left],arIntegers[right]);
- if(arIntegers[right] < arIntegers[center])
- swap(arIntegers[center],arIntegers[right]);
-
- swap(arIntegers[center],arIntegers[right-1]);
-
- return center;
-}
-
-// This function takes an array (or one half an array) and sorts it.
-// It then returns a new pivot index number back to quicksort.
-
-int partition(int *arIntegers, int left, int right, int pivot)
-{
-/* cout << "partition ("<< arIntegers[0] << ","
- << arIntegers[1] << ","
- << arIntegers[2] << ","
- << arIntegers[3] << ","
- << arIntegers[4] << ","
- << arIntegers[5] << ","
- << arIntegers[6] << "],"
- << left << ","
- << right << ")\n";
-*/
- int pivotValue = arIntegers[pivot];
-
- // Swap it out all the way to the end of the array
- // So we know where it always is.
- swap(arIntegers[pivot], arIntegers[right]);
- int storeIndex = left;
-
- // Move through the array from start to finish comparing each to our
- // pivot value (not index, the value that was located at the pivot index)
- for (int i = left; i < right; i++)
- {
- if (arIntegers[i] <= pivotValue)
- {
- swap(arIntegers[i], arIntegers[storeIndex]);
- storeIndex++;
- }
- }
- swap(arIntegers[storeIndex], arIntegers[right]);
- return storeIndex;
-}
-
-// Simple swap function for our in place swapping.
-void swap(int &val1, int &val2)
-{
- int temp = val1;
- val1 = val2;
- val2 = temp;
-}
diff --git a/converter/cNBTData.cpp b/converter/cNBTData.cpp
index fc0dd628e..c54f7d74e 100644
--- a/converter/cNBTData.cpp
+++ b/converter/cNBTData.cpp
@@ -145,7 +145,7 @@ void cNBTData::Compress()
if( ret != Z_STREAM_END )
{
- printf("WARNING: Compressing didn't go to end of stream\n");//re
+ //printf("WARNING: Compressing didn't go to end of stream\n");//re
}
if(m_Buffer)
@@ -249,7 +249,7 @@ void cNBTCompound::AppendInteger( std::string & a_Buffer, int a_Value )
void cNBTCompound::Serialize(std::string & a_Buffer)
{
- printf("cNBTCompound::Serialize()\n");//re
+ //printf("cNBTCompound::Serialize()\n");//re
for( CompoundMap::iterator itr = m_Compounds.begin(); itr != m_Compounds.end(); itr++ )
{
if( itr->second == 0 ) continue;
@@ -357,10 +357,10 @@ void cNBTCompound::PrintData( int a_Depth, std::string a_Name )
printf("%s BYTE %s (%i)\n", Prefix, itr->first.c_str(), itr->second );
}
- for( ByteArrayMap::iterator itr = m_ByteArrays.begin(); itr != m_ByteArrays.end(); itr++ )
- {
- printf("%s BYTE ARRAY %s (length: %i)\n", Prefix, itr->first.c_str(), sizeof(itr->second) );
- }
+ for( ByteArrayMap::iterator itr = m_ByteArrays.begin(); itr != m_ByteArrays.end(); itr++ )
+ {
+ printf("%s BYTE ARRAY %s (length: %li)\n", Prefix, itr->first.c_str(), sizeof(itr->second) );
+ }
delete Prefix;
}
@@ -383,7 +383,7 @@ void cNBTData::Serialize()
memcpy( m_Buffer, Buffer.c_str(), Buffer.size() );
m_BufferSize = Buffer.size();
-printf("m_BufferSize1: %i\n", m_BufferSize);//re
+ //printf("m_BufferSize1: %i\n", m_BufferSize);//re
//for(unsigned int i = 0; i < m_BufferSize; i++)//re
//{//re
@@ -400,18 +400,18 @@ void cNBTData::ParseData()
}
m_Index = 0;
- printf("m_BufferSize2: %i\n", m_BufferSize);//re
- printf("cNBTData::ParseData()\n");//re
+ //printf("m_BufferSize2: %i\n", m_BufferSize);//re
+ //printf("cNBTData::ParseData()\n");//re
//for(unsigned int i = 0; i < m_BufferSize; i++)//re
- for(unsigned int i = 0; i < 70; i++)//re
- {//re
- printf("echo%02i %02x %3i %c\n", i, (unsigned char)m_Buffer[i], (unsigned char)m_Buffer[i], m_Buffer[i] );//re
- }//re
+ //for(unsigned int i = 0; i < 70; i++)//re
+ //{//re
+ // printf("echo%02i %02x %3i %c\n", i, (unsigned char)m_Buffer[i], (unsigned char)m_Buffer[i], m_Buffer[i] );//re
+ //}//re
while( m_Index < m_BufferSize )
{
- printf("m_BufferSize3: %i\n", m_BufferSize);
- printf("m_Index: %i\n", m_Index);
+ //printf("m_BufferSize3: %i\n", m_BufferSize);
+ //printf("m_Index: %i\n", m_Index);
ParseTags();
}
}
@@ -420,20 +420,20 @@ void cNBTData::ParseTags()
{
if( m_Index < m_BufferSize )
{
- printf("ParseTags idx:%02i %02x %3i %c\n", m_Index, (unsigned char)m_Buffer[m_Index], (unsigned char)m_Buffer[m_Index], m_Buffer[m_Index] );//re
+ //printf("ParseTags idx:%02i %02x %3i %c\n", m_Index, (unsigned char)m_Buffer[m_Index], (unsigned char)m_Buffer[m_Index], m_Buffer[m_Index] );//re
unsigned char Tag = m_Buffer[m_Index];
if( Tag > 0 && m_ParseFunctions[ Tag ] )
{
- printf("m_BufferSize4: %i\n", m_BufferSize);
- printf("m_Index1: %i\n\n\n\n", m_Index);
+ //printf("m_BufferSize4: %i\n", m_BufferSize);
+ //printf("m_Index1: %i\n\n\n\n", m_Index);
m_Index++;
- printf("Tag: %i\n", Tag);
+ //printf("Tag: %i\n", Tag);
(*this.*m_ParseFunctions[ Tag ])(true);
}
else if( Tag == TAG_End )
{
- printf("Tag End");
+ //printf("Tag End");
m_Index++;
}
else
@@ -453,7 +453,7 @@ void cNBTData::ParseCompound( bool a_bNamed )
{
std::string Name;
if( a_bNamed ) Name = ReadName();
- printf("OPEN COMPOUND: %s\n", Name.c_str() );//re
+ //printf("OPEN COMPOUND: %s\n", Name.c_str() );//re
PutCompound( Name );
OpenCompound( Name );
@@ -462,7 +462,7 @@ void cNBTData::ParseCompound( bool a_bNamed )
ParseTags();
}
CloseCompound();
- printf("CLOSE COMPOUND\n");//re
+ //printf("CLOSE COMPOUND\n");//re
}
void cNBTData::ParseList( bool a_bNamed )
@@ -471,12 +471,12 @@ void cNBTData::ParseList( bool a_bNamed )
if( a_bNamed ) Name = ReadName();
ENUM_TAG TagType = (ENUM_TAG)ReadByte();
int Length = ReadInt();
- printf("LIST: %s Type: %02x Length: %i\n", Name.c_str(), TagType, Length );//re
+ //printf("LIST: %s Type: %02x Length: %i\n", Name.c_str(), TagType, Length );//re
- for(unsigned int i = (m_Index-10 > 0)?m_Index-10:0 ; i < m_Index+10 && i < m_BufferSize; i++)//re
- {//re
- printf("%02i %02x %3i %c\n", i, (unsigned char)m_Buffer[i], (unsigned char)m_Buffer[i], m_Buffer[i] );//re
- }//re
+ //for(unsigned int i = (m_Index-10 > 0)?m_Index-10:0 ; i < m_Index+10 && i < m_BufferSize; i++)//re
+ //{//re
+ //printf("%02i %02x %3i %c\n", i, (unsigned char)m_Buffer[i], (unsigned char)m_Buffer[i], m_Buffer[i] );//re
+ //}//re
PutList( Name, TagType );
OpenList( Name );
@@ -500,7 +500,7 @@ void cNBTData::ParseByte( bool a_bNamed )
PutByte( Name, Value );
- printf("BYTE: %s %i\n", Name.c_str(), Value );//re
+ //printf("BYTE: %s %i\n", Name.c_str(), Value );//re
}
void cNBTData::ParseShort( bool a_bNamed )
@@ -511,7 +511,7 @@ void cNBTData::ParseShort( bool a_bNamed )
PutShort( Name, Value );
- printf("SHORT: %s %i\n", Name.c_str(), Value );//re
+ //printf("SHORT: %s %i\n", Name.c_str(), Value );//re
}
void cNBTData::ParseInt( bool a_bNamed )
@@ -522,7 +522,7 @@ void cNBTData::ParseInt( bool a_bNamed )
PutInteger( Name, Value );
- printf("INT: %s %i\n", Name.c_str(), Value );//re
+ //printf("INT: %s %i\n", Name.c_str(), Value );//re
}
void cNBTData::ParseLong( bool a_bNamed )
@@ -533,7 +533,7 @@ void cNBTData::ParseLong( bool a_bNamed )
PutInteger( Name, (int)Value );
- printf("LONG: %s %li\n", Name.c_str(), Value );//re
+ //printf("LONG: %s %lli\n", Name.c_str(), Value );//re
}
void cNBTData::ParseString( bool a_bNamed )
@@ -544,7 +544,7 @@ void cNBTData::ParseString( bool a_bNamed )
PutString( Name, String );
- printf("STRING: %s (%s)\n", Name.c_str(), String.c_str() );//re
+ //printf("STRING: %s (%s)\n", Name.c_str(), String.c_str() );//re
}
void cNBTData::ParseByteArray( bool a_bNamed )
@@ -559,21 +559,21 @@ void cNBTData::ParseByteArray( bool a_bNamed )
char* ByteArray = new char[ Length ];
if( Length > 0 )
{
- memcpy( ByteArray, &m_Buffer[ m_Index ], Length );
+ memcpy( ByteArray, &m_Buffer[ m_Index ], Length );
m_Index += Length;
}
PutByteArray( Name, ByteArray );
- printf("VALUE: %s First 5 Chars: (%i,%i,%i,%i,%i)\n", Name.c_str(), ByteArray[0],ByteArray[1],ByteArray[2],ByteArray[3],ByteArray[4] );//re
+ //printf("VALUE: %s First 5 Chars: (%i,%i,%i,%i,%i)\n", Name.c_str(), ByteArray[0],ByteArray[1],ByteArray[2],ByteArray[3],ByteArray[4] );//re
}
std::string cNBTData::ReadName()
{
-printf("crui1 \n");
+ //printf("crui1 \n");
short Length = ReadShort();
-printf("crui Length: %i\n", Length);
+ //printf("crui Length: %i\n", Length);
std::string Name;
if( Length > 0 )
{
@@ -758,4 +758,4 @@ void cNBTList::Clear()
}
}
m_List.clear();
-} \ No newline at end of file
+}
diff --git a/converter/cNBTData.h b/converter/cNBTData.h
index 2ab5b0e21..4d5ec0beb 100644
--- a/converter/cNBTData.h
+++ b/converter/cNBTData.h
@@ -23,11 +23,11 @@ public:
TAG_Byte = 1,
TAG_Short = 2,
TAG_Int = 3,
- TAG_Long = 4,
- TAG_Float = 5,
- TAG_Double = 6,
+ TAG_Long = 4,
+ TAG_Float = 5,
+ TAG_Double = 6,
TAG_ByteArray = 7,
- TAG_String = 8,
+ TAG_String = 8,
TAG_List = 9,
TAG_Compound = 10,
TAG_NumTags // Not a real tag, but contains number of tags
@@ -53,8 +53,8 @@ public:
cNBTCompound* GetCompound( std::string Name );
cNBTList* GetList( std::string Name ) { return m_Lists[Name]; }
- cNBTList* GetCurrentList() { return m_CurrentList; }
- cNBTCompound* GetParentCompound() { return m_ParentCompound; }
+ cNBTList* GetCurrentList() { return m_CurrentList; }
+ cNBTCompound* GetParentCompound() { return m_ParentCompound; }
bool OpenList( std::string a_Name );
bool CloseList();
diff --git a/converter/denotch b/converter/denotch
index ef8a7db6d..d222a8d27 100755
--- a/converter/denotch
+++ b/converter/denotch
Binary files differ
diff --git a/converter/quicksort.cpp b/converter/quicksort.cpp
new file mode 100644
index 000000000..9bc1d477f
--- /dev/null
+++ b/converter/quicksort.cpp
@@ -0,0 +1,88 @@
+#include "quicksort.h"
+
+
+
+
+// Quicksort controller function, it partitions the different pieces of our array.
+void quicksort(int *arIntegers, int left, int right)
+{
+/* cout << "quicksort ([" << arIntegers[0] << ","
+ << arIntegers[1] << ","
+ << arIntegers[2] << ","
+ << arIntegers[3] << ","
+ << arIntegers[4] << ","
+ << arIntegers[5] << ","
+ << arIntegers[6] << "],"
+ << left << ","
+ << right << ")\n";
+*/
+ if (right > left)
+ {
+ int pivotIndex = median3(arIntegers,left,right);
+ int pivotNewIndex = partition(arIntegers, left, right, pivotIndex);
+
+ // Recursive call to quicksort to sort each half.
+ quicksort(arIntegers, left, pivotNewIndex-1);
+ quicksort(arIntegers, pivotNewIndex+1, right);
+ }
+}
+
+int median3(int *arIntegers,int left,int right)
+{
+ int center = (left+right)/2;
+
+ if(arIntegers[center] < arIntegers[left])
+ swap(arIntegers[left],arIntegers[center]);
+ if(arIntegers[right] < arIntegers[left])
+ swap(arIntegers[left],arIntegers[right]);
+ if(arIntegers[right] < arIntegers[center])
+ swap(arIntegers[center],arIntegers[right]);
+
+ swap(arIntegers[center],arIntegers[right-1]);
+
+ return center;
+}
+
+// This function takes an array (or one half an array) and sorts it.
+// It then returns a new pivot index number back to quicksort.
+int partition(int *arIntegers, int left, int right, int pivot)
+{
+/* cout << "partition ("<< arIntegers[0] << ","
+ << arIntegers[1] << ","
+ << arIntegers[2] << ","
+ << arIntegers[3] << ","
+ << arIntegers[4] << ","
+ << arIntegers[5] << ","
+ << arIntegers[6] << "],"
+ << left << ","
+ << right << ")\n";
+*/
+ int pivotValue = arIntegers[pivot];
+
+ // Swap it out all the way to the end of the array
+ // So we know where it always is.
+ swap(arIntegers[pivot], arIntegers[right]);
+ int storeIndex = left;
+
+ // Move through the array from start to finish comparing each to our
+ // pivot value (not index, the value that was located at the pivot index)
+ for (int i = left; i < right; i++)
+ {
+ if (arIntegers[i] <= pivotValue)
+ {
+ swap(arIntegers[i], arIntegers[storeIndex]);
+ storeIndex++;
+ }
+ }
+ swap(arIntegers[storeIndex], arIntegers[right]);
+ return storeIndex;
+}
+
+// Simple swap function for our in place swapping.
+void swap(int &val1, int &val2)
+{
+ int temp = val1;
+ val1 = val2;
+ val2 = temp;
+}
+
diff --git a/converter/quicksort.h b/converter/quicksort.h
new file mode 100644
index 000000000..b3be0e36b
--- /dev/null
+++ b/converter/quicksort.h
@@ -0,0 +1,9 @@
+#pragma once
+
+#include <ctype.h>
+
+void quicksort(int*, int, int);
+int partition(int*, int, int, int);
+int median3(int*,int,int);
+void swap(int &, int &);
+
diff --git a/converter/timer.cpp b/converter/timer.cpp
new file mode 100644
index 000000000..f9f9aea3e
--- /dev/null
+++ b/converter/timer.cpp
@@ -0,0 +1,9 @@
+#include "timer.h"
+
+double diffclock(clock_t clock1,clock_t clock2)
+{
+ double diffticks=clock1-clock2;
+ double diffms=(diffticks*10)/CLOCKS_PER_SEC;
+ return diffms;
+}
+
diff --git a/converter/timer.h b/converter/timer.h
new file mode 100644
index 000000000..1c7134ef6
--- /dev/null
+++ b/converter/timer.h
@@ -0,0 +1,8 @@
+#pragma once
+
+#include <time.h>
+
+double diffclock(clock_t, clock_t);
+
+
+