summaryrefslogtreecommitdiffstats
path: root/source/Generating/Noise3DGenerator.cpp
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--source/Generating/Noise3DGenerator.cpp576
1 files changed, 0 insertions, 576 deletions
diff --git a/source/Generating/Noise3DGenerator.cpp b/source/Generating/Noise3DGenerator.cpp
deleted file mode 100644
index 03626a800..000000000
--- a/source/Generating/Noise3DGenerator.cpp
+++ /dev/null
@@ -1,576 +0,0 @@
-
-// Nosie3DGenerator.cpp
-
-// Generates terrain using 3D noise, rather than composing. Is a test.
-
-#include "Globals.h"
-#include "Noise3DGenerator.h"
-#include "../OSSupport/File.h"
-#include "../../iniFile/iniFile.h"
-#include "../LinearInterpolation.h"
-#include "../LinearUpscale.h"
-
-
-
-
-
-/*
-// Perform an automatic test of upscaling upon program start (use breakpoints to debug):
-
-class Test
-{
-public:
- Test(void)
- {
- DoTest1();
- DoTest2();
- }
-
-
- void DoTest1(void)
- {
- float In[3 * 3 * 3];
- for (int i = 0; i < ARRAYCOUNT(In); i++)
- {
- In[i] = (float)(i % 5);
- }
- Debug3DNoise(In, 3, 3, 3, "Upscale3D in");
- float Out[17 * 33 * 35];
- LinearUpscale3DArray(In, 3, 3, 3, Out, 8, 16, 17);
- Debug3DNoise(Out, 17, 33, 35, "Upscale3D test");
- }
-
-
- void DoTest2(void)
- {
- float In[3 * 3];
- for (int i = 0; i < ARRAYCOUNT(In); i++)
- {
- In[i] = (float)(i % 5);
- }
- Debug2DNoise(In, 3, 3, "Upscale2D in");
- float Out[17 * 33];
- LinearUpscale2DArray(In, 3, 3, Out, 8, 16);
- Debug2DNoise(Out, 17, 33, "Upscale2D test");
- }
-
-} gTest;
-//*/
-
-
-
-
-
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// cNoise3DGenerator:
-
-cNoise3DGenerator::cNoise3DGenerator(cChunkGenerator & a_ChunkGenerator) :
- super(a_ChunkGenerator),
- m_Perlin(1000),
- m_Cubic(1000)
-{
- m_Perlin.AddOctave(1, (NOISE_DATATYPE)0.5);
- m_Perlin.AddOctave((NOISE_DATATYPE)0.5, 1);
- m_Perlin.AddOctave((NOISE_DATATYPE)0.5, 2);
-
- #if 0
- // DEBUG: Test the noise generation:
- // NOTE: In order to be able to run MCS with this code, you need to increase the default thread stack size
- // In MSVC, it is done in Project Settings -> Configuration Properties -> Linker -> System, set Stack reserve size to at least 64M
- m_SeaLevel = 62;
- m_HeightAmplification = 0;
- m_MidPoint = 75;
- m_FrequencyX = 4;
- m_FrequencyY = 4;
- m_FrequencyZ = 4;
- m_AirThreshold = 0.5;
-
- const int NumChunks = 4;
- NOISE_DATATYPE Noise[NumChunks][cChunkDef::Width * cChunkDef::Width * cChunkDef::Height];
- for (int x = 0; x < NumChunks; x++)
- {
- GenerateNoiseArray(x, 5, Noise[x]);
- }
-
- // Save in XY cuts:
- cFile f1;
- if (f1.Open("Test_XY.grab", cFile::fmWrite))
- {
- for (int z = 0; z < cChunkDef::Width; z++)
- {
- for (int y = 0; y < cChunkDef::Height; y++)
- {
- for (int i = 0; i < NumChunks; i++)
- {
- int idx = y * cChunkDef::Width + z * cChunkDef::Width * cChunkDef::Height;
- unsigned char buf[cChunkDef::Width];
- for (int x = 0; x < cChunkDef::Width; x++)
- {
- buf[x] = (unsigned char)(std::min(256, std::max(0, (int)(128 + 32 * Noise[i][idx++]))));
- }
- f1.Write(buf, cChunkDef::Width);
- }
- } // for y
- } // for z
- } // if (XY file open)
-
- cFile f2;
- if (f2.Open("Test_XZ.grab", cFile::fmWrite))
- {
- for (int y = 0; y < cChunkDef::Height; y++)
- {
- for (int z = 0; z < cChunkDef::Width; z++)
- {
- for (int i = 0; i < NumChunks; i++)
- {
- int idx = y * cChunkDef::Width + z * cChunkDef::Width * cChunkDef::Height;
- unsigned char buf[cChunkDef::Width];
- for (int x = 0; x < cChunkDef::Width; x++)
- {
- buf[x] = (unsigned char)(std::min(256, std::max(0, (int)(128 + 32 * Noise[i][idx++]))));
- }
- f2.Write(buf, cChunkDef::Width);
- }
- } // for z
- } // for y
- } // if (XZ file open)
- #endif // 0
-}
-
-
-
-
-
-cNoise3DGenerator::~cNoise3DGenerator()
-{
- // Nothing needed yet
-}
-
-
-
-
-
-void cNoise3DGenerator::Initialize(cWorld * a_World, cIniFile & a_IniFile)
-{
- m_World = a_World;
-
- // Params:
- m_SeaLevel = a_IniFile.GetValueSetI("Generator", "Noise3DSeaLevel", 62);
- m_HeightAmplification = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DHeightAmplification", 0);
- m_MidPoint = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DMidPoint", 75);
- m_FrequencyX = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DFrequencyX", 8);
- m_FrequencyY = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DFrequencyY", 8);
- m_FrequencyZ = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DFrequencyZ", 8);
- m_AirThreshold = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DAirThreshold", 0.5);
-}
-
-
-
-
-
-void cNoise3DGenerator::GenerateBiomes(int a_ChunkX, int a_ChunkZ, cChunkDef::BiomeMap & a_BiomeMap)
-{
- for (unsigned int i = 0; i < ARRAYCOUNT(a_BiomeMap); i++)
- {
- a_BiomeMap[i] = biExtremeHills;
- }
-}
-
-
-
-
-
-void cNoise3DGenerator::DoGenerate(int a_ChunkX, int a_ChunkZ, cChunkDesc & a_ChunkDesc)
-{
- NOISE_DATATYPE Noise[17 * 257 * 17];
- GenerateNoiseArray(a_ChunkX, a_ChunkZ, Noise);
-
- // Output noise into chunk:
- for (int z = 0; z < cChunkDef::Width; z++)
- {
- for (int y = 0; y < cChunkDef::Height; y++)
- {
- int idx = z * 17 * 257 + y * 17;
- for (int x = 0; x < cChunkDef::Width; x++)
- {
- NOISE_DATATYPE n = Noise[idx++];
- BLOCKTYPE BlockType;
- if (n > m_AirThreshold)
- {
- BlockType = (y > m_SeaLevel) ? E_BLOCK_AIR : E_BLOCK_STATIONARY_WATER;
- }
- else
- {
- BlockType = E_BLOCK_STONE;
- }
- a_ChunkDesc.SetBlockType(x, y, z, BlockType);
- }
- }
- }
-
- UpdateHeightmap(a_ChunkDesc);
- ComposeTerrain (a_ChunkDesc);
-}
-
-
-
-
-
-void cNoise3DGenerator::GenerateNoiseArray(int a_ChunkX, int a_ChunkZ, NOISE_DATATYPE * a_OutNoise)
-{
- NOISE_DATATYPE NoiseO[DIM_X * DIM_Y * DIM_Z]; // Output for the Perlin noise
- NOISE_DATATYPE NoiseW[DIM_X * DIM_Y * DIM_Z]; // Workspace that the noise calculation can use and trash
-
- // Our noise array has different layout, XZY, instead of regular chunk's XYZ, that's why the coords are "renamed"
- NOISE_DATATYPE StartX = ((NOISE_DATATYPE)(a_ChunkX * cChunkDef::Width)) / m_FrequencyX;
- NOISE_DATATYPE EndX = ((NOISE_DATATYPE)((a_ChunkX + 1) * cChunkDef::Width) - 1) / m_FrequencyX;
- NOISE_DATATYPE StartZ = ((NOISE_DATATYPE)(a_ChunkZ * cChunkDef::Width)) / m_FrequencyZ;
- NOISE_DATATYPE EndZ = ((NOISE_DATATYPE)((a_ChunkZ + 1) * cChunkDef::Width) - 1) / m_FrequencyZ;
- NOISE_DATATYPE StartY = 0;
- NOISE_DATATYPE EndY = ((NOISE_DATATYPE)256) / m_FrequencyY;
-
- m_Perlin.Generate3D(NoiseO, DIM_X, DIM_Y, DIM_Z, StartX, EndX, StartY, EndY, StartZ, EndZ, NoiseW);
-
- // DEBUG: Debug3DNoise(NoiseO, DIM_X, DIM_Y, DIM_Z, Printf("Chunk_%d_%d_orig", a_ChunkX, a_ChunkZ));
-
- // Precalculate a "height" array:
- NOISE_DATATYPE Height[DIM_X * DIM_Z]; // Output for the cubic noise heightmap ("source")
- m_Cubic.Generate2D(Height, DIM_X, DIM_Z, StartX / 25, EndX / 25, StartZ / 25, EndZ / 25);
- for (unsigned int i = 0; i < ARRAYCOUNT(Height); i++)
- {
- Height[i] = abs(Height[i]) * m_HeightAmplification + 1;
- }
-
- // Modify the noise by height data:
- for (int y = 0; y < DIM_Y; y++)
- {
- NOISE_DATATYPE AddHeight = (y * UPSCALE_Y - m_MidPoint) / 20;
- AddHeight *= AddHeight * AddHeight;
- for (int z = 0; z < DIM_Z; z++)
- {
- NOISE_DATATYPE * CurRow = &(NoiseO[y * DIM_X + z * DIM_X * DIM_Y]);
- for (int x = 0; x < DIM_X; x++)
- {
- CurRow[x] += AddHeight / Height[x + DIM_X * z];
- }
- }
- }
-
- // DEBUG: Debug3DNoise(NoiseO, DIM_X, DIM_Y, DIM_Z, Printf("Chunk_%d_%d_hei", a_ChunkX, a_ChunkZ));
-
- // Upscale the Perlin noise into full-blown chunk dimensions:
- LinearUpscale3DArray(
- NoiseO, DIM_X, DIM_Y, DIM_Z,
- a_OutNoise, UPSCALE_X, UPSCALE_Y, UPSCALE_Z
- );
-
- // DEBUG: Debug3DNoise(a_OutNoise, 17, 257, 17, Printf("Chunk_%d_%d_lerp", a_ChunkX, a_ChunkZ));
-}
-
-
-
-
-
-void cNoise3DGenerator::UpdateHeightmap(cChunkDesc & a_ChunkDesc)
-{
- for (int z = 0; z < cChunkDef::Width; z++)
- {
- for (int x = 0; x < cChunkDef::Width; x++)
- {
- for (int y = cChunkDef::Height - 1; y > 0; y--)
- {
- if (a_ChunkDesc.GetBlockType(x, y, z) != E_BLOCK_AIR)
- {
- a_ChunkDesc.SetHeight(x, z, y);
- break;
- }
- } // for y
- } // for x
- } // for z
-}
-
-
-
-
-
-void cNoise3DGenerator::ComposeTerrain(cChunkDesc & a_ChunkDesc)
-{
- // Make basic terrain composition:
- for (int z = 0; z < cChunkDef::Width; z++)
- {
- for (int x = 0; x < cChunkDef::Width; x++)
- {
- int LastAir = a_ChunkDesc.GetHeight(x, z) + 1;
- bool HasHadWater = false;
- for (int y = LastAir - 1; y > 0; y--)
- {
- switch (a_ChunkDesc.GetBlockType(x, y, z))
- {
- case E_BLOCK_AIR:
- {
- LastAir = y;
- break;
- }
- case E_BLOCK_STONE:
- {
- if (LastAir - y > 3)
- {
- break;
- }
- if (HasHadWater)
- {
- a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_SAND);
- }
- else
- {
- a_ChunkDesc.SetBlockType(x, y, z, (LastAir == y + 1) ? E_BLOCK_GRASS : E_BLOCK_DIRT);
- }
- break;
- }
- case E_BLOCK_STATIONARY_WATER:
- {
- LastAir = y;
- HasHadWater = true;
- break;
- }
- } // switch (GetBlockType())
- } // for y
- a_ChunkDesc.SetBlockType(x, 0, z, E_BLOCK_BEDROCK);
- } // for x
- } // for z
-}
-
-
-
-
-
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// cNoise3DComposable:
-
-cNoise3DComposable::cNoise3DComposable(int a_Seed) :
- m_Noise1(a_Seed + 1000),
- m_Noise2(a_Seed + 2000),
- m_Noise3(a_Seed + 3000)
-{
-}
-
-
-
-
-
-void cNoise3DComposable::Initialize(cIniFile & a_IniFile)
-{
- // Params:
- m_SeaLevel = a_IniFile.GetValueSetI("Generator", "Noise3DSeaLevel", 62);
- m_HeightAmplification = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DHeightAmplification", 0);
- m_MidPoint = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DMidPoint", 75);
- m_FrequencyX = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DFrequencyX", 10);
- m_FrequencyY = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DFrequencyY", 10);
- m_FrequencyZ = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DFrequencyZ", 10);
- m_AirThreshold = (NOISE_DATATYPE)a_IniFile.GetValueSetF("Generator", "Noise3DAirThreshold", 0.5);
-}
-
-
-
-
-
-void cNoise3DComposable::GenerateNoiseArrayIfNeeded(int a_ChunkX, int a_ChunkZ)
-{
- if ((a_ChunkX == m_LastChunkX) && (a_ChunkZ == m_LastChunkZ))
- {
- // The noise for this chunk is already generated in m_Noise
- return;
- }
- m_LastChunkX = a_ChunkX;
- m_LastChunkZ = a_ChunkZ;
-
- // Upscaling parameters:
- const int UPSCALE_X = 8;
- const int UPSCALE_Y = 4;
- const int UPSCALE_Z = 8;
-
- // Precalculate a "height" array:
- NOISE_DATATYPE Height[17 * 17]; // x + 17 * z
- for (int z = 0; z < 17; z += UPSCALE_Z)
- {
- NOISE_DATATYPE NoiseZ = ((NOISE_DATATYPE)(a_ChunkZ * cChunkDef::Width + z)) / m_FrequencyZ;
- for (int x = 0; x < 17; x += UPSCALE_X)
- {
- NOISE_DATATYPE NoiseX = ((NOISE_DATATYPE)(a_ChunkX * cChunkDef::Width + x)) / m_FrequencyX;
- NOISE_DATATYPE val = abs(m_Noise1.CubicNoise2D(NoiseX / 5, NoiseZ / 5)) * m_HeightAmplification + 1;
- Height[x + 17 * z] = val * val * val;
- }
- }
-
- for (int y = 0; y < 257; y += UPSCALE_Y)
- {
- NOISE_DATATYPE NoiseY = ((NOISE_DATATYPE)y) / m_FrequencyY;
- NOISE_DATATYPE AddHeight = (y - m_MidPoint) / 20;
- AddHeight *= AddHeight * AddHeight;
- NOISE_DATATYPE * CurFloor = &(m_NoiseArray[y * 17 * 17]);
- for (int z = 0; z < 17; z += UPSCALE_Z)
- {
- NOISE_DATATYPE NoiseZ = ((NOISE_DATATYPE)(a_ChunkZ * cChunkDef::Width + z)) / m_FrequencyZ;
- for (int x = 0; x < 17; x += UPSCALE_X)
- {
- NOISE_DATATYPE NoiseX = ((NOISE_DATATYPE)(a_ChunkX * cChunkDef::Width + x)) / m_FrequencyX;
- CurFloor[x + 17 * z] =
- m_Noise1.CubicNoise3D(NoiseX, NoiseY, NoiseZ) * (NOISE_DATATYPE)0.5 +
- m_Noise2.CubicNoise3D(NoiseX / 2, NoiseY / 2, NoiseZ / 2) +
- m_Noise3.CubicNoise3D(NoiseX / 4, NoiseY / 4, NoiseZ / 4) * 2 +
- AddHeight / Height[x + 17 * z];
- }
- }
- // Linear-interpolate this XZ floor:
- LinearUpscale2DArrayInPlace(CurFloor, 17, 17, UPSCALE_X, UPSCALE_Z);
- }
-
- // Finish the 3D linear interpolation by interpolating between each XZ-floors on the Y axis
- for (int y = 1; y < cChunkDef::Height; y++)
- {
- if ((y % UPSCALE_Y) == 0)
- {
- // This is the interpolation source floor, already calculated
- continue;
- }
- int LoFloorY = (y / UPSCALE_Y) * UPSCALE_Y;
- int HiFloorY = LoFloorY + UPSCALE_Y;
- NOISE_DATATYPE * LoFloor = &(m_NoiseArray[LoFloorY * 17 * 17]);
- NOISE_DATATYPE * HiFloor = &(m_NoiseArray[HiFloorY * 17 * 17]);
- NOISE_DATATYPE * CurFloor = &(m_NoiseArray[y * 17 * 17]);
- NOISE_DATATYPE Ratio = ((NOISE_DATATYPE)(y % UPSCALE_Y)) / UPSCALE_Y;
- int idx = 0;
- for (int z = 0; z < cChunkDef::Width; z++)
- {
- for (int x = 0; x < cChunkDef::Width; x++)
- {
- CurFloor[idx] = LoFloor[idx] + (HiFloor[idx] - LoFloor[idx]) * Ratio;
- idx += 1;
- }
- idx += 1; // Skipping one X column
- }
- }
-
- // The noise array is now fully interpolated
- /*
- // DEBUG: Output two images of the array, sliced by XY and XZ:
- cFile f1;
- if (f1.Open(Printf("Chunk_%d_%d_XY.raw", a_ChunkX, a_ChunkZ), cFile::fmWrite))
- {
- for (int z = 0; z < cChunkDef::Width; z++)
- {
- for (int y = 0; y < cChunkDef::Height; y++)
- {
- int idx = y * 17 * 17 + z * 17;
- unsigned char buf[16];
- for (int x = 0; x < cChunkDef::Width; x++)
- {
- buf[x] = (unsigned char)(std::min(256, std::max(0, (int)(128 + 128 * m_Noise[idx++]))));
- }
- f1.Write(buf, 16);
- } // for y
- } // for z
- } // if (XY file open)
-
- cFile f2;
- if (f2.Open(Printf("Chunk_%d_%d_XZ.raw", a_ChunkX, a_ChunkZ), cFile::fmWrite))
- {
- for (int y = 0; y < cChunkDef::Height; y++)
- {
- for (int z = 0; z < cChunkDef::Width; z++)
- {
- int idx = y * 17 * 17 + z * 17;
- unsigned char buf[16];
- for (int x = 0; x < cChunkDef::Width; x++)
- {
- buf[x] = (unsigned char)(std::min(256, std::max(0, (int)(128 + 128 * m_Noise[idx++]))));
- }
- f2.Write(buf, 16);
- } // for z
- } // for y
- } // if (XZ file open)
- */
-}
-
-
-
-
-
-void cNoise3DComposable::GenHeightMap(int a_ChunkX, int a_ChunkZ, cChunkDef::HeightMap & a_HeightMap)
-{
- GenerateNoiseArrayIfNeeded(a_ChunkX, a_ChunkZ);
-
- for (int z = 0; z < cChunkDef::Width; z++)
- {
- for (int x = 0; x < cChunkDef::Width; x++)
- {
- cChunkDef::SetHeight(a_HeightMap, x, z, m_SeaLevel);
- for (int y = cChunkDef::Height - 1; y > m_SeaLevel; y--)
- {
- if (m_NoiseArray[y * 17 * 17 + z * 17 + x] <= m_AirThreshold)
- {
- cChunkDef::SetHeight(a_HeightMap, x, z, y);
- break;
- }
- } // for y
- } // for x
- } // for z
-}
-
-
-
-
-
-void cNoise3DComposable::ComposeTerrain(cChunkDesc & a_ChunkDesc)
-{
- GenerateNoiseArrayIfNeeded(a_ChunkDesc.GetChunkX(), a_ChunkDesc.GetChunkZ());
-
- a_ChunkDesc.FillBlocks(E_BLOCK_AIR, 0);
-
- // Make basic terrain composition:
- for (int z = 0; z < cChunkDef::Width; z++)
- {
- for (int x = 0; x < cChunkDef::Width; x++)
- {
- int LastAir = a_ChunkDesc.GetHeight(x, z) + 1;
- bool HasHadWater = false;
- for (int y = LastAir; y < m_SeaLevel; y++)
- {
- a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_STATIONARY_WATER);
- }
- for (int y = LastAir - 1; y > 0; y--)
- {
- if (m_NoiseArray[x + 17 * z + 17 * 17 * y] > m_AirThreshold)
- {
- // "air" part
- LastAir = y;
- if (y < m_SeaLevel)
- {
- a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_STATIONARY_WATER);
- HasHadWater = true;
- }
- continue;
- }
- // "ground" part:
- if (LastAir - y > 4)
- {
- a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_STONE);
- continue;
- }
- if (HasHadWater)
- {
- a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_SAND);
- }
- else
- {
- a_ChunkDesc.SetBlockType(x, y, z, (LastAir == y + 1) ? E_BLOCK_GRASS : E_BLOCK_DIRT);
- }
- } // for y
- a_ChunkDesc.SetBlockType(x, 0, z, E_BLOCK_BEDROCK);
- } // for x
- } // for z
-}
-
-
-
-