From e72b02d84e7f67cdf6107862ad580e951a5bbda1 Mon Sep 17 00:00:00 2001
From: Ben <b-schaefer@posteo.de>
Date: Fri, 21 Feb 2020 10:45:40 +0100
Subject: format code with black

---
 glucometerutils/drivers/accuchek_reports.py |  73 ++++++-----
 glucometerutils/drivers/contourusb.py       |  39 +++---
 glucometerutils/drivers/fsinsulinx.py       |  55 +++++----
 glucometerutils/drivers/fslibre.py          | 184 ++++++++++++++--------------
 glucometerutils/drivers/fsoptium.py         | 134 ++++++++++----------
 glucometerutils/drivers/fsprecisionneo.py   |  61 +++++----
 glucometerutils/drivers/otultra2.py         | 112 ++++++++---------
 glucometerutils/drivers/otultraeasy.py      | 149 +++++++++++-----------
 glucometerutils/drivers/otverio2015.py      | 123 +++++++++----------
 glucometerutils/drivers/otverioiq.py        | 104 ++++++++--------
 glucometerutils/drivers/sdcodefree.py       | 108 ++++++++--------
 glucometerutils/drivers/td4277.py           | 129 ++++++++++---------
 12 files changed, 638 insertions(+), 633 deletions(-)

(limited to 'glucometerutils/drivers')

diff --git a/glucometerutils/drivers/accuchek_reports.py b/glucometerutils/drivers/accuchek_reports.py
index 06b69bc..c4d7527 100644
--- a/glucometerutils/drivers/accuchek_reports.py
+++ b/glucometerutils/drivers/accuchek_reports.py
@@ -19,45 +19,46 @@ import datetime
 import glob
 import os
 
-from glucometerutils import common
-from glucometerutils import exceptions
+from glucometerutils import common, exceptions
 from glucometerutils.support import driver_base
 
 _UNIT_MAP = {
-    'mmol/l': common.Unit.MMOL_L,
-    'mg/dl': common.Unit.MG_DL,
+    "mmol/l": common.Unit.MMOL_L,
+    "mg/dl": common.Unit.MG_DL,
 }
 
-_DATE_CSV_KEY = 'Date'
-_TIME_CSV_KEY = 'Time'
-_RESULT_CSV_KEY = 'Result'
-_UNIT_CSV_KEY = 'Unit'
-_TEMPWARNING_CSV_KEY = 'Temperature warning' # ignored
-_OUTRANGE_CSV_KEY = 'Out of target range' # ignored
-_OTHER_CSV_KEY = 'Other' # ignored
-_BEFORE_MEAL_CSV_KEY = 'Before meal'
-_AFTER_MEAL_CSV_KEY = 'After meal'
+_DATE_CSV_KEY = "Date"
+_TIME_CSV_KEY = "Time"
+_RESULT_CSV_KEY = "Result"
+_UNIT_CSV_KEY = "Unit"
+_TEMPWARNING_CSV_KEY = "Temperature warning"  # ignored
+_OUTRANGE_CSV_KEY = "Out of target range"  # ignored
+_OTHER_CSV_KEY = "Other"  # ignored
+_BEFORE_MEAL_CSV_KEY = "Before meal"
+_AFTER_MEAL_CSV_KEY = "After meal"
 # Control test has extra whitespace which is not ignored.
-_CONTROL_CSV_KEY = 'Control test' + ' '*197
+_CONTROL_CSV_KEY = "Control test" + " " * 197
 
-_DATE_FORMAT = '%d.%m.%Y'
-_TIME_FORMAT = '%H:%M'
+_DATE_FORMAT = "%d.%m.%Y"
+_TIME_FORMAT = "%H:%M"
 
-_DATETIME_FORMAT = ' '.join((_DATE_FORMAT, _TIME_FORMAT))
+_DATETIME_FORMAT = " ".join((_DATE_FORMAT, _TIME_FORMAT))
 
 
 class Device(driver_base.GlucometerDriver):
     def __init__(self, device):
         if not device or not os.path.isdir(device):
             raise exceptions.CommandLineError(
-                '--device parameter is required, should point to mount path '
-                'for the meter.')
+                "--device parameter is required, should point to mount path "
+                "for the meter."
+            )
 
-        reports_path = os.path.join(device, '*', 'Reports', '*.csv')
+        reports_path = os.path.join(device, "*", "Reports", "*.csv")
         report_files = glob.glob(reports_path)
         if not report_files:
             raise exceptions.ConnectionFailed(
-                'No report file found in path "%s".' % reports_path)
+                'No report file found in path "%s".' % reports_path
+            )
 
         self.report_file = report_files[0]
 
@@ -68,35 +69,32 @@ class Device(driver_base.GlucometerDriver):
         next(self.report)
 
         return csv.DictReader(
-            self.report,
-            delimiter=';',
-            skipinitialspace=True,
-            quoting=csv.QUOTE_NONE)
+            self.report, delimiter=";", skipinitialspace=True, quoting=csv.QUOTE_NONE
+        )
 
     def connect(self):
-        self.report = open(
-            self.report_file, 'r', newline='\r\n', encoding='utf-8')
+        self.report = open(self.report_file, "r", newline="\r\n", encoding="utf-8")
 
     def disconnect(self):
         self.report.close()
 
     def get_meter_info(self):
         return common.MeterInfo(
-            '%s glucometer' % self.get_model(),
+            "%s glucometer" % self.get_model(),
             serial_number=self.get_serial_number(),
-            native_unit=self.get_glucose_unit())
+            native_unit=self.get_glucose_unit(),
+        )
 
     def get_model(self):
         # $device/MODEL/Reports/*.csv
-        return os.path.basename(
-            os.path.dirname(os.path.dirname(self.report_file)))
+        return os.path.basename(os.path.dirname(os.path.dirname(self.report_file)))
 
     def get_serial_number(self):
         self.report.seek(0)
         # ignore the first line.
         next(self.report)
         # The second line of the CSV is serial-no;report-date;report-time;;;;;;;
-        return next(self.report).split(';')[0]
+        return next(self.report).split(";")[0]
 
     def get_glucose_unit(self):
         # Get the first record available and parse that.
@@ -115,13 +113,12 @@ class Device(driver_base.GlucometerDriver):
     def _extract_datetime(self, record):  # pylint: disable=no-self-use
         # Date and time are in separate column, but we want to parse them
         # together.
-        date_and_time = ' '.join((record[_DATE_CSV_KEY], record[_TIME_CSV_KEY]))
+        date_and_time = " ".join((record[_DATE_CSV_KEY], record[_TIME_CSV_KEY]))
         return datetime.datetime.strptime(date_and_time, _DATETIME_FORMAT)
 
     def _extract_meal(self, record):  # pylint: disable=no-self-use
         if record[_AFTER_MEAL_CSV_KEY] and record[_BEFORE_MEAL_CSV_KEY]:
-            raise exceptions.InvalidResponse(
-                'Reading cannot be before and after meal.')
+            raise exceptions.InvalidResponse("Reading cannot be before and after meal.")
         elif record[_AFTER_MEAL_CSV_KEY]:
             return common.Meal.AFTER
         elif record[_BEFORE_MEAL_CSV_KEY]:
@@ -139,5 +136,7 @@ class Device(driver_base.GlucometerDriver):
                 common.convert_glucose_unit(
                     float(record[_RESULT_CSV_KEY]),
                     _UNIT_MAP[record[_UNIT_CSV_KEY]],
-                    common.Unit.MG_DL),
-                meal=self._extract_meal(record))
+                    common.Unit.MG_DL,
+                ),
+                meal=self._extract_meal(record),
+            )
diff --git a/glucometerutils/drivers/contourusb.py b/glucometerutils/drivers/contourusb.py
index 397eb4f..5c9ed11 100644
--- a/glucometerutils/drivers/contourusb.py
+++ b/glucometerutils/drivers/contourusb.py
@@ -24,43 +24,44 @@ from glucometerutils import common
 from glucometerutils.support import contourusb, driver_base
 
 
-def _extract_timestamp(parsed_record, prefix=''):
+def _extract_timestamp(parsed_record, prefix=""):
     """Extract the timestamp from a parsed record.
 
     This leverages the fact that all the reading records have the same base structure.
     """
-    datetime_str = parsed_record['datetime']
+    datetime_str = parsed_record["datetime"]
 
     return datetime.datetime(
-        int(datetime_str[0:4]), #year
-        int(datetime_str[4:6]), #month
-        int(datetime_str[6:8]), #day
-        int(datetime_str[8:10]), #hour
-        int(datetime_str[10:12]), #minute
-        0)
+        int(datetime_str[0:4]),  # year
+        int(datetime_str[4:6]),  # month
+        int(datetime_str[6:8]),  # day
+        int(datetime_str[8:10]),  # hour
+        int(datetime_str[10:12]),  # minute
+        0,
+    )
 
 
 class Device(contourusb.ContourHidDevice, driver_base.GlucometerDriver):
     """Glucometer driver for FreeStyle Libre devices."""
 
-    USB_VENDOR_ID = 0x1a79  # type: int  # Bayer Health Care LLC Contour
+    USB_VENDOR_ID = 0x1A79  # type: int  # Bayer Health Care LLC Contour
     USB_PRODUCT_ID = 0x6002  # type: int
 
     def get_meter_info(self):
         self._get_info_record()
         return common.MeterInfo(
-            'Contour USB',
+            "Contour USB",
             serial_number=self._get_serial_number(),
-            version_info=(
-                'Meter versions: ' + self._get_version(),),
-            native_unit= self.get_glucose_unit())
+            version_info=("Meter versions: " + self._get_version(),),
+            native_unit=self.get_glucose_unit(),
+        )
 
     def get_glucose_unit(self):  # pylint: disable=no-self-use
-        if self._get_glucose_unit() == '0':
+        if self._get_glucose_unit() == "0":
             return common.Unit.MG_DL
         else:
             return common.Unit.MMOL_L
-        
+
     def get_readings(self):
         """
         Get reading dump from download data mode(all readings stored)
@@ -69,10 +70,10 @@ class Device(contourusb.ContourHidDevice, driver_base.GlucometerDriver):
         for parsed_record in self._get_multirecord():
             yield common.GlucoseReading(
                 _extract_timestamp(parsed_record),
-                int(parsed_record['value']),
-                comment=parsed_record['markers'],
-                measure_method=common.MeasurementMethod.BLOOD_SAMPLE
-                )
+                int(parsed_record["value"]),
+                comment=parsed_record["markers"],
+                measure_method=common.MeasurementMethod.BLOOD_SAMPLE,
+            )
 
     def get_serial_number(self):
         raise NotImplementedError
diff --git a/glucometerutils/drivers/fsinsulinx.py b/glucometerutils/drivers/fsinsulinx.py
index f3cf043..5465b3a 100644
--- a/glucometerutils/drivers/fsinsulinx.py
+++ b/glucometerutils/drivers/fsinsulinx.py
@@ -22,20 +22,30 @@ import datetime
 from glucometerutils import common
 from glucometerutils.support import freestyle
 
-
 # The type is a string because it precedes the parsing of the object.
-_TYPE_GLUCOSE_READING = '0'
-
-_InsulinxReading = collections.namedtuple('_InsulinxReading', (
-    'type',  # 0 = blood glucose
-    'id',
-    'month', 'day', 'year',  # year is two-digits
-    'hour', 'minute',
-    'unknown1', 'unknown2', 'unknown3',
-    'unknown4', 'unknown5', 'unknown6',
-    'value',
-    'unknown7', 'unknown8',
-))
+_TYPE_GLUCOSE_READING = "0"
+
+_InsulinxReading = collections.namedtuple(
+    "_InsulinxReading",
+    (
+        "type",  # 0 = blood glucose
+        "id",
+        "month",
+        "day",
+        "year",  # year is two-digits
+        "hour",
+        "minute",
+        "unknown1",
+        "unknown2",
+        "unknown3",
+        "unknown4",
+        "unknown5",
+        "unknown6",
+        "value",
+        "unknown7",
+        "unknown8",
+    ),
+)
 
 
 class Device(freestyle.FreeStyleHidDevice):
@@ -46,11 +56,11 @@ class Device(freestyle.FreeStyleHidDevice):
     def get_meter_info(self):
         """Return the device information in structured form."""
         return common.MeterInfo(
-            'FreeStyle InsuLinx',
+            "FreeStyle InsuLinx",
             serial_number=self.get_serial_number(),
-            version_info=(
-                'Software version: ' + self._get_version(),),
-            native_unit=self.get_glucose_unit())
+            version_info=("Software version: " + self._get_version(),),
+            native_unit=self.get_glucose_unit(),
+        )
 
     def get_glucose_unit(self):  # pylint: disable=no-self-use
         """Returns the glucose unit of the device."""
@@ -58,7 +68,7 @@ class Device(freestyle.FreeStyleHidDevice):
 
     def get_readings(self):
         """Iterate through the reading records in the device."""
-        for record in self._get_multirecord(b'$result?'):
+        for record in self._get_multirecord(b"$result?"):
             if not record or record[0] != _TYPE_GLUCOSE_READING:
                 continue
 
@@ -67,11 +77,14 @@ class Device(freestyle.FreeStyleHidDevice):
             raw_reading = _InsulinxReading._make([int(v) for v in record])
 
             timestamp = datetime.datetime(
-                raw_reading.year + 2000, raw_reading.month, raw_reading.day,
-                raw_reading.hour, raw_reading.minute)
+                raw_reading.year + 2000,
+                raw_reading.month,
+                raw_reading.day,
+                raw_reading.hour,
+                raw_reading.minute,
+            )
 
             yield common.GlucoseReading(timestamp, raw_reading.value)
 
     def zero_log(self):
         raise NotImplementedError
-
diff --git a/glucometerutils/drivers/fslibre.py b/glucometerutils/drivers/fslibre.py
index f1ac525..29e821a 100644
--- a/glucometerutils/drivers/fslibre.py
+++ b/glucometerutils/drivers/fslibre.py
@@ -27,52 +27,47 @@ from glucometerutils.support import freestyle
 # Fields of the records returned by both $history and $arresult?
 # Tuple of pairs of idx and field name
 _BASE_ENTRY_MAP = (
-    (0, 'device_id'),
-    (1, 'type'),
-    (2, 'month'),
-    (3, 'day'),
-    (4, 'year'),  # 2-digits
-    (5, 'hour'),
-    (6, 'minute'),
-    (7, 'second'),
+    (0, "device_id"),
+    (1, "type"),
+    (2, "month"),
+    (3, "day"),
+    (4, "year"),  # 2-digits
+    (5, "hour"),
+    (6, "minute"),
+    (7, "second"),
 )
 
 # Fields of the records returned by $history?
-_HISTORY_ENTRY_MAP = _BASE_ENTRY_MAP + (
-    (13, 'value'),
-    (15, 'errors'),
-)
+_HISTORY_ENTRY_MAP = _BASE_ENTRY_MAP + ((13, "value"), (15, "errors"),)
 
 # Fields of the results returned by $arresult? where type = 2
 _ARRESULT_TYPE2_ENTRY_MAP = (
-    (9, 'reading-type'),  # 0 = glucose blood strip,
-                          # 1 = ketone blood strip,
-                          # 2 = glucose sensor
-    (12, 'value'),
-    (15, 'sport-flag'),
-    (16, 'medication-flag'),
-    (17, 'rapid-acting-flag'),  # see _ARRESULT_RAPID_INSULIN_ENTRY_MAP
-    (18, 'long-acting-flag'),
-    (19, 'custom-comments-bitfield'),
-    (23, 'double-long-acting-insulin'),
-    (25, 'food-flag'),
-    (26, 'food-carbs-grams'),
-    (28, 'errors'),
+    (9, "reading-type"),  # 0 = glucose blood strip,
+    # 1 = ketone blood strip,
+    # 2 = glucose sensor
+    (12, "value"),
+    (15, "sport-flag"),
+    (16, "medication-flag"),
+    (17, "rapid-acting-flag"),  # see _ARRESULT_RAPID_INSULIN_ENTRY_MAP
+    (18, "long-acting-flag"),
+    (19, "custom-comments-bitfield"),
+    (23, "double-long-acting-insulin"),
+    (25, "food-flag"),
+    (26, "food-carbs-grams"),
+    (28, "errors"),
 )
 
 _ARRESULT_TIME_ADJUSTMENT_ENTRY_MAP = (
-    (9, 'old_month'),
-    (10, 'old_day'),
-    (11, 'old_year'),
-    (12, 'old_hour'),
-    (13, 'old_minute'),
-    (14, 'old_second'),
+    (9, "old_month"),
+    (10, "old_day"),
+    (11, "old_year"),
+    (12, "old_hour"),
+    (13, "old_minute"),
+    (14, "old_second"),
 )
 
 # Fields only valid when rapid-acting-flag is "1"
-_ARRESULT_RAPID_INSULIN_ENTRY_MAP = (
-    (43, 'double-rapid-acting-insulin'),
-)
+_ARRESULT_RAPID_INSULIN_ENTRY_MAP = ((43, "double-rapid-acting-insulin"),)
 
 
 def _parse_record(record, entry_map):
@@ -82,26 +77,25 @@ def _parse_record(record, entry_map):
         return {}
 
     try:
-        return {
-            key: int(record[idx]) for idx, key in entry_map
-        }
+        return {key: int(record[idx]) for idx, key in entry_map}
     except IndexError:
         return {}
 
 
-def _extract_timestamp(parsed_record, prefix=''):
+def _extract_timestamp(parsed_record, prefix=""):
     """Extract the timestamp from a parsed record.
 
     This leverages the fact that all the records have the same base structure.
     """
 
     return datetime.datetime(
-        parsed_record[prefix + 'year'] + 2000,
-        parsed_record[prefix + 'month'],
-        parsed_record[prefix + 'day'],
-        parsed_record[prefix + 'hour'],
-        parsed_record[prefix + 'minute'],
-        parsed_record[prefix + 'second'])
+        parsed_record[prefix + "year"] + 2000,
+        parsed_record[prefix + "month"],
+        parsed_record[prefix + "day"],
+        parsed_record[prefix + "hour"],
+        parsed_record[prefix + "minute"],
+        parsed_record[prefix + "second"],
+    )
 
 
 def _parse_arresult(record):
@@ -112,24 +106,23 @@ def _parse_arresult(record):
     # There are other record types, but we don't currently need to expose these.
     if not parsed_record:
         return None
-    elif parsed_record['type'] == 2:
+    elif parsed_record["type"] == 2:
         parsed_record.update(_parse_record(record, _ARRESULT_TYPE2_ENTRY_MAP))
-    elif parsed_record['type'] == 5:
+    elif parsed_record["type"] == 5:
         parsed_record.update(_parse_record(record, _ARRESULT_TIME_ADJUSTMENT_ENTRY_MAP))
         return common.TimeAdjustment(
             _extract_timestamp(parsed_record),
-            _extract_timestamp(parsed_record, 'old_'),
-            extra_data={'device_id': parsed_record['device_id']},
+            _extract_timestamp(parsed_record, "old_"),
+            extra_data={"device_id": parsed_record["device_id"]},
         )
     else:
         return None
 
     # Check right away if we have rapid insulin
-    if parsed_record['rapid-acting-flag']:
-        parsed_record.update(
-            _parse_record(record, _ARRESULT_RAPID_INSULIN_ENTRY_MAP))
+    if parsed_record["rapid-acting-flag"]:
+        parsed_record.update(_parse_record(record, _ARRESULT_RAPID_INSULIN_ENTRY_MAP))
 
-    if parsed_record['errors']:
+    if parsed_record["errors"]:
         return None
 
     comment_parts = []
@@ -137,68 +130,69 @@ def _parse_arresult(record):
     cls = None
     value = None
 
-    if parsed_record['reading-type'] == 2:
-        comment_parts.append('(Scan)')
+    if parsed_record["reading-type"] == 2:
+        comment_parts.append("(Scan)")
         measure_method = common.MeasurementMethod.CGM
         cls = common.GlucoseReading
-        value = parsed_record['value']
-    elif parsed_record['reading-type'] == 0:
-        comment_parts.append('(Blood)')
+        value = parsed_record["value"]
+    elif parsed_record["reading-type"] == 0:
+        comment_parts.append("(Blood)")
         measure_method = common.MeasurementMethod.BLOOD_SAMPLE
         cls = common.GlucoseReading
-        value = parsed_record['value']
-    elif parsed_record['reading-type'] == 1:
-        comment_parts.append('(Ketone)')
+        value = parsed_record["value"]
+    elif parsed_record["reading-type"] == 1:
+        comment_parts.append("(Ketone)")
         measure_method = common.MeasurementMethod.BLOOD_SAMPLE
         cls = common.KetoneReading
         # automatically convert the raw value in mmol/L
-        value = freestyle.convert_ketone_unit(parsed_record['value'])
+        value = freestyle.convert_ketone_unit(parsed_record["value"])
     else:
         # unknown reading
         return None
 
     custom_comments = record[29:35]
     for comment_index in range(6):
-        if parsed_record['custom-comments-bitfield'] & (1 << comment_index):
+        if parsed_record["custom-comments-bitfield"] & (1 << comment_index):
             comment_parts.append(custom_comments[comment_index][1:-1])
 
-    if parsed_record['sport-flag']:
-        comment_parts.append('Sport')
+    if parsed_record["sport-flag"]:
+        comment_parts.append("Sport")
 
-    if parsed_record['medication-flag']:
-        comment_parts.append('Medication')
+    if parsed_record["medication-flag"]:
+        comment_parts.append("Medication")
 
-    if parsed_record['food-flag']:
-        if parsed_record['food-carbs-grams']:
-            comment_parts.append(
-                'Food (%d g)' % parsed_record['food-carbs-grams'])
+    if parsed_record["food-flag"]:
+        if parsed_record["food-carbs-grams"]:
+            comment_parts.append("Food (%d g)" % parsed_record["food-carbs-grams"])
         else:
-            comment_parts.append('Food')
+            comment_parts.append("Food")
 
-    if parsed_record['long-acting-flag']:
-        if parsed_record['double-long-acting-insulin']:
+    if parsed_record["long-acting-flag"]:
+        if parsed_record["double-long-acting-insulin"]:
             comment_parts.append(
-                'Long-acting insulin (%.1f)' %
-                (parsed_record['double-long-acting-insulin']/2.))
+                "Long-acting insulin (%.1f)"
+                % (parsed_record["double-long-acting-insulin"] / 2.0)
+            )
         else:
-            comment_parts.append('Long-acting insulin')
+            comment_parts.append("Long-acting insulin")
 
-    if parsed_record['rapid-acting-flag']:
+    if parsed_record["rapid-acting-flag"]:
         # provide default value, as this record does not always exist
         # (even if rapid-acting-flag is set)
-        if parsed_record.get('double-rapid-acting-insulin', 0):
+        if parsed_record.get("double-rapid-acting-insulin", 0):
             comment_parts.append(
-                'Rapid-acting insulin (%.1f)' %
-                (parsed_record['double-rapid-acting-insulin']/2.))
+                "Rapid-acting insulin (%.1f)"
+                % (parsed_record["double-rapid-acting-insulin"] / 2.0)
+            )
         else:
-            comment_parts.append('Rapid-acting insulin')
+            comment_parts.append("Rapid-acting insulin")
 
     return cls(
         _extract_timestamp(parsed_record),
         value,
-        comment='; '.join(comment_parts),
+        comment="; ".join(comment_parts),
         measure_method=measure_method,
-        extra_data={'device_id': parsed_record['device_id']},
+        extra_data={"device_id": parsed_record["device_id"]},
     )
 
 
@@ -210,16 +204,16 @@ class Device(freestyle.FreeStyleHidDevice):
     def get_meter_info(self):
         """Return the device information in structured form."""
         return common.MeterInfo(
-            'FreeStyle Libre',
+            "FreeStyle Libre",
             serial_number=self.get_serial_number(),
-            version_info=(
-                'Software version: ' + self._get_version(),),
+            version_info=("Software version: " + self._get_version(),),
             native_unit=self.get_glucose_unit(),
-            patient_name=self.get_patient_name())
+            patient_name=self.get_patient_name(),
+        )
 
     def get_serial_number(self):
         """Overridden function as the command is not compatible."""
-        return self._send_text_command(b'$sn?').rstrip('\r\n')
+        return self._send_text_command(b"$sn?").rstrip("\r\n")
 
     def get_glucose_unit(self):  # pylint: disable=no-self-use
         """Returns the glucose unit of the device."""
@@ -231,27 +225,27 @@ class Device(freestyle.FreeStyleHidDevice):
 
         # First of all get the usually longer list of sensor readings, and
         # convert them to Readings objects.
-        for record in self._get_multirecord(b'$history?'):
+        for record in self._get_multirecord(b"$history?"):
             parsed_record = _parse_record(record, _HISTORY_ENTRY_MAP)
 
-            if not parsed_record or parsed_record['errors'] != 0:
+            if not parsed_record or parsed_record["errors"] != 0:
                 # The reading is considered invalid, so ignore it.
                 continue
 
             yield common.GlucoseReading(
                 _extract_timestamp(parsed_record),
-                parsed_record['value'],
-                comment='(Sensor)',
+                parsed_record["value"],
+                comment="(Sensor)",
                 measure_method=common.MeasurementMethod.CGM,
-                extra_data={'device_id': parsed_record['device_id']},
+                extra_data={"device_id": parsed_record["device_id"]},
             )
 
         # Then get the results of explicit scans and blood tests (and other
         # events).
-        for record in self._get_multirecord(b'$arresult?'):
+        for record in self._get_multirecord(b"$arresult?"):
             reading = _parse_arresult(record)
             if reading:
                 yield reading
 
     def zero_log(self):
-        self._send_text_command(b'$resetpatient')
+        self._send_text_command(b"$resetpatient")
diff --git a/glucometerutils/drivers/fsoptium.py b/glucometerutils/drivers/fsoptium.py
index 66b23ca..5c3971e 100644
--- a/glucometerutils/drivers/fsoptium.py
+++ b/glucometerutils/drivers/fsoptium.py
@@ -20,13 +20,13 @@ import datetime
 import logging
 import re
 
-from glucometerutils import common
-from glucometerutils import exceptions
-from glucometerutils.support import serial, driver_base
+from glucometerutils import common, exceptions
+from glucometerutils.support import driver_base, serial
 
 _CLOCK_RE = re.compile(
-    r'^Clock:\t(?P<month>[A-Z][a-z]{2})  (?P<day>[0-9]{2}) (?P<year>[0-9]{4})\t'
-    r'(?P<time>[0-9]{2}:[0-9]{2}:[0-9]{2})$')
+    r"^Clock:\t(?P<month>[A-Z][a-z]{2})  (?P<day>[0-9]{2}) (?P<year>[0-9]{4})\t"
+    r"(?P<time>[0-9]{2}:[0-9]{2}:[0-9]{2})$"
+)
 
 # The reading can be HI (padded to three-characters by a space) if the value was
 # over what the meter was supposed to read. Unlike the "Clock:" line, the months
@@ -34,33 +34,33 @@ _CLOCK_RE = re.compile(
 # characters, so accept a space or 'e'/'y' at the end of the month name. Also,
 # the time does *not* include seconds.
 _READING_RE = re.compile(
-    r'^(?P<reading>HI |[0-9]{3})  '
-    r'(?P<month>[A-Z][a-z]{2})[ ey] '
-    r'(?P<day>[0-9]{2}) '
-    r'(?P<year>[0-9]{4}) '
-    r'(?P<time>[0-9]{2}:[0-9]{2}) '
-    r'(?P<type>[GK]) 0x00$')
+    r"^(?P<reading>HI |[0-9]{3})  "
+    r"(?P<month>[A-Z][a-z]{2})[ ey] "
+    r"(?P<day>[0-9]{2}) "
+    r"(?P<year>[0-9]{4}) "
+    r"(?P<time>[0-9]{2}:[0-9]{2}) "
+    r"(?P<type>[GK]) 0x00$"
+)
 
-_CHECKSUM_RE = re.compile(
-    r'^(?P<checksum>0x[0-9A-F]{4})  END$')
+_CHECKSUM_RE = re.compile(r"^(?P<checksum>0x[0-9A-F]{4})  END$")
 
 # There are two date format used by the device. One uses three-letters month
 # names, and that's easy enough. The other uses three-letters month names,
 # except for (at least) July. So ignore the fourth character.
 # explicit mapping. Note that the mapping *requires* a trailing whitespace.
 _MONTH_MATCHES = {
-    'Jan': 1,
-    'Feb': 2,
-    'Mar': 3,
-    'Apr': 4,
-    'May': 5,
-    'Jun': 6,
-    'Jul': 7,
-    'Aug': 8,
-    'Sep': 9,
-    'Oct': 10,
-    'Nov': 11,
-    'Dec': 12
+    "Jan": 1,
+    "Feb": 2,
+    "Mar": 3,
+    "Apr": 4,
+    "May": 5,
+    "Jun": 6,
+    "Jul": 7,
+    "Aug": 8,
+    "Sep": 9,
+    "Oct": 10,
+    "Nov": 11,
+    "Dec": 12,
 }
 
 
@@ -75,60 +75,59 @@ def _parse_clock(datestr):
         raise exceptions.InvalidResponse(datestr)
 
     # int() parses numbers in decimal, so we don't have to worry about '08'
-    day = int(match.group('day'))
-    month = _MONTH_MATCHES[match.group('month')]
-    year = int(match.group('year'))
+    day = int(match.group("day"))
+    month = _MONTH_MATCHES[match.group("month")]
+    year = int(match.group("year"))
 
-    hour, minute, second = (int (x) for x in match.group('time').split(':'))
+    hour, minute, second = (int(x) for x in match.group("time").split(":"))
 
     return datetime.datetime(year, month, day, hour, minute, second)
 
 
 class Device(serial.SerialDevice, driver_base.GlucometerDriver):
     BAUDRATE = 19200
-    DEFAULT_CABLE_ID = '1a61:3420'
+    DEFAULT_CABLE_ID = "1a61:3420"
 
     def _send_command(self, command):
-        cmd_bytes = bytes('$%s\r\n' % command, 'ascii')
-        logging.debug('Sending command: %r', cmd_bytes)
+        cmd_bytes = bytes("$%s\r\n" % command, "ascii")
+        logging.debug("Sending command: %r", cmd_bytes)
 
         self.serial_.write(cmd_bytes)
         self.serial_.flush()
 
         response = self.serial_.readlines()
 
-        logging.debug('Received response: %r', response)
+        logging.debug("Received response: %r", response)
 
         # We always want to decode the output, and remove stray \r\n. Any
         # failure in decoding means the output is invalid anyway.
-        decoded_response = [line.decode('ascii').rstrip('\r\n')
-                            for line in response]
+        decoded_response = [line.decode("ascii").rstrip("\r\n") for line in response]
         return decoded_response
 
     def connect(self):
-        self._send_command('xmem')  # ignore output this time
+        self._send_command("xmem")  # ignore output this time
         self._fetch_device_information()
 
     def disconnect(self):  # pylint: disable=no-self-use
         return
 
     def _fetch_device_information(self):
-        data = self._send_command('colq')
+        data = self._send_command("colq")
 
         for line in data:
-            parsed_line = line.split('\t')
+            parsed_line = line.split("\t")
 
-            if parsed_line[0] == 'S/N:':
+            if parsed_line[0] == "S/N:":
                 self.device_serialno_ = parsed_line[1]
-            elif parsed_line[0] == 'Ver:':
+            elif parsed_line[0] == "Ver:":
                 self.device_version_ = parsed_line[1]
-                if parsed_line[2] == 'MMOL':
+                if parsed_line[2] == "MMOL":
                     self.device_glucose_unit_ = common.Unit.MMOL_L
                 else:  # I only have a mmol/l device, so I can't be sure.
                     self.device_glucose_unit_ = common.Unit.MG_DL
             # There are more entries: Clock, Market, ROM and Usage, but we don't
             # care for those here.
-            elif parsed_line[0] == 'CMD OK':
+            elif parsed_line[0] == "CMD OK":
                 return
 
         # I have not figured out why this happens, but sometimes it's echoing
@@ -142,11 +141,11 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
           A common.MeterInfo object.
         """
         return common.MeterInfo(
-            'Freestyle Optium glucometer',
+            "Freestyle Optium glucometer",
             serial_number=self.get_serial_number(),
-            version_info=(
-                'Software version: ' + self.get_version(),),
-            native_unit=self.get_glucose_unit())
+            version_info=("Software version: " + self.get_version(),),
+            native_unit=self.get_glucose_unit(),
+        )
 
     def get_version(self):
         """Returns an identifier of the firmware version of the glucometer.
@@ -179,21 +178,21 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
         Returns:
           A datetime object built according to the returned response.
         """
-        data = self._send_command('colq')
+        data = self._send_command("colq")
 
         for line in data:
-            if not line.startswith('Clock:'):
+            if not line.startswith("Clock:"):
                 continue
 
             return _parse_clock(line)
 
-        raise exceptions.InvalidResponse('\n'.join(data))
+        raise exceptions.InvalidResponse("\n".join(data))
 
     def _set_device_datetime(self, date):
-        data = self._send_command(date.strftime('tim,%m,%d,%y,%H,%M'))
+        data = self._send_command(date.strftime("tim,%m,%d,%y,%H,%M"))
 
-        parsed_data = ''.join(data)
-        if parsed_data != 'CMD OK':
+        parsed_data = "".join(data)
+        if parsed_data != "CMD OK":
             raise exceptions.InvalidResponse(parsed_data)
 
         return self.get_datetime()
@@ -216,50 +215,47 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
           expected.
 
         """
-        data = self._send_command('xmem')
+        data = self._send_command("xmem")
 
         # The first line is empty, the second is the serial number, the third
         # the version, the fourth the current time, and the fifth the record
         # count.. The last line has a checksum and the end.
         count = int(data[4])
         if count != (len(data) - 6):
-            raise exceptions.InvalidResponse('\n'.join(data))
+            raise exceptions.InvalidResponse("\n".join(data))
 
         # Extract the checksum from the last line.
         checksum_match = _CHECKSUM_RE.match(data[-1])
         if not checksum_match:
-            raise exceptions.InvalidResponse('\n'.join(data))
+            raise exceptions.InvalidResponse("\n".join(data))
 
-        expected_checksum = int(checksum_match.group('checksum'), 16)
+        expected_checksum = int(checksum_match.group("checksum"), 16)
         # exclude the last line in the checksum calculation, as that's the
         # checksum itself. The final \r\n is added separately.
-        calculated_checksum = sum(
-            ord(c) for c in '\r\n'.join(data[:-1])) + 0xd + 0xa
+        calculated_checksum = sum(ord(c) for c in "\r\n".join(data[:-1])) + 0xD + 0xA
 
         if expected_checksum != calculated_checksum:
-            raise exceptions.InvalidChecksum(
-                expected_checksum, calculated_checksum)
+            raise exceptions.InvalidChecksum(expected_checksum, calculated_checksum)
 
         for line in data[5:-1]:
             match = _READING_RE.match(line)
             if not match:
                 raise exceptions.InvalidResponse(line)
 
-            if match.group('type') != 'G':
-                logging.warning(
-                    'Non-glucose readings are not supported, ignoring.')
+            if match.group("type") != "G":
+                logging.warning("Non-glucose readings are not supported, ignoring.")
                 continue
 
-            if match.group('reading') == 'HI ':
+            if match.group("reading") == "HI ":
                 value = float("inf")
             else:
-                value = float(match.group('reading'))
+                value = float(match.group("reading"))
 
-            day = int(match.group('day'))
-            month = _MONTH_MATCHES[match.group('month')]
-            year = int(match.group('year'))
+            day = int(match.group("day"))
+            month = _MONTH_MATCHES[match.group("month")]
+            year = int(match.group("year"))
 
-            hour, minute = map(int, match.group('time').split(':'))
+            hour, minute = map(int, match.group("time").split(":"))
 
             timestamp = datetime.datetime(year, month, day, hour, minute)
 
diff --git a/glucometerutils/drivers/fsprecisionneo.py b/glucometerutils/drivers/fsprecisionneo.py
index 58564e5..909fed8 100644
--- a/glucometerutils/drivers/fsprecisionneo.py
+++ b/glucometerutils/drivers/fsprecisionneo.py
@@ -27,25 +27,30 @@ import datetime
 from glucometerutils import common
 from glucometerutils.support import freestyle
 
-
 # The type is a string because it precedes the parsing of the object.
-_TYPE_GLUCOSE_READING = '7'
-_TYPE_KETONE_READING = '9'
-
-_NeoReading = collections.namedtuple('_NeoReading', (
-    'type',  # 7 = blood glucose, 9 = blood ketone
-    'id',
-    'month', 'day', 'year',  # year is two-digits
-    'hour', 'minute',
-    'unknown2',
-    'value',
-    # Extra trailing and so-far-unused fields; so discard them:
-    # * for blood glucose: 10 unknown trailing fields
-    #'unknown3', 'unknown4', 'unknown5', 'unknown6', 'unknown7',
-    #'unknown8', 'unknown9', 'unknown10', 'unknown11', 'unknown12',
-    # * for blood ketone: 2 unknown trailing fields
-    #'unknown3', 'unknown4',
-))
+_TYPE_GLUCOSE_READING = "7"
+_TYPE_KETONE_READING = "9"
+
+_NeoReading = collections.namedtuple(
+    "_NeoReading",
+    (
+        "type",  # 7 = blood glucose, 9 = blood ketone
+        "id",
+        "month",
+        "day",
+        "year",  # year is two-digits
+        "hour",
+        "minute",
+        "unknown2",
+        "value",
+        # Extra trailing and so-far-unused fields; so discard them:
+        # * for blood glucose: 10 unknown trailing fields
+        #'unknown3', 'unknown4', 'unknown5', 'unknown6', 'unknown7',
+        #'unknown8', 'unknown9', 'unknown10', 'unknown11', 'unknown12',
+        # * for blood ketone: 2 unknown trailing fields
+        #'unknown3', 'unknown4',
+    ),
+)
 
 
 class Device(freestyle.FreeStyleHidDevice):
@@ -56,12 +61,12 @@ class Device(freestyle.FreeStyleHidDevice):
     def get_meter_info(self):
         """Return the device information in structured form."""
         return common.MeterInfo(
-            'FreeStyle Precision Neo',
+            "FreeStyle Precision Neo",
             serial_number=self.get_serial_number(),
-            version_info=(
-                'Software version: ' + self._get_version(),),
+            version_info=("Software version: " + self._get_version(),),
             native_unit=self.get_glucose_unit(),
-            patient_name=self.get_patient_name())
+            patient_name=self.get_patient_name(),
+        )
 
     def get_glucose_unit(self):  # pylint: disable=no-self-use
         """Returns the glucose unit of the device."""
@@ -69,7 +74,7 @@ class Device(freestyle.FreeStyleHidDevice):
 
     def get_readings(self):
         """Iterate through the reading records in the device."""
-        for record in self._get_multirecord(b'$result?'):
+        for record in self._get_multirecord(b"$result?"):
             cls = None
             if record and record[0] == _TYPE_GLUCOSE_READING:
                 cls = common.GlucoseReading
@@ -85,11 +90,15 @@ class Device(freestyle.FreeStyleHidDevice):
                 if value == "HI":
                     value = float("inf")
                 values.append(int(value))
-            raw_reading = _NeoReading._make(values[:len(_NeoReading._fields)])
+            raw_reading = _NeoReading._make(values[: len(_NeoReading._fields)])
 
             timestamp = datetime.datetime(
-                raw_reading.year + 2000, raw_reading.month, raw_reading.day,
-                raw_reading.hour, raw_reading.minute)
+                raw_reading.year + 2000,
+                raw_reading.month,
+                raw_reading.day,
+                raw_reading.hour,
+                raw_reading.minute,
+            )
 
             if record and record[0] == _TYPE_KETONE_READING:
                 value = freestyle.convert_ketone_unit(raw_reading.value)
diff --git a/glucometerutils/drivers/otultra2.py b/glucometerutils/drivers/otultra2.py
index 39be859..5e90b87 100644
--- a/glucometerutils/drivers/otultra2.py
+++ b/glucometerutils/drivers/otultra2.py
@@ -16,40 +16,40 @@ Expected device path: /dev/ttyUSB0 or similar serial port device.
 import datetime
 import re
 
-from glucometerutils import common
-from glucometerutils import exceptions
+from glucometerutils import common, exceptions
 from glucometerutils.support import driver_base, lifescan, serial
 
 # The following two hashes are taken directly from LifeScan's documentation
 _MEAL_CODES = {
-    'N': common.Meal.NONE,
-    'B': common.Meal.BEFORE,
-    'A': common.Meal.AFTER,
+    "N": common.Meal.NONE,
+    "B": common.Meal.BEFORE,
+    "A": common.Meal.AFTER,
 }
 
 _COMMENT_CODES = {
-    '00': '',  # would be 'No Comment'
-    '01': 'Not Enough Food',
-    '02': 'Too Much Food',
-    '03': 'Mild Exercise',
-    '04': 'Hard Exercise',
-    '05': 'Medication',
-    '06': 'Stress',
-    '07': 'Illness',
-    '08': 'Feel Hypo',
-    '09': 'Menses',
-    '10': 'Vacation',
-    '11': 'Other',
+    "00": "",  # would be 'No Comment'
+    "01": "Not Enough Food",
+    "02": "Too Much Food",
+    "03": "Mild Exercise",
+    "04": "Hard Exercise",
+    "05": "Medication",
+    "06": "Stress",
+    "07": "Illness",
+    "08": "Feel Hypo",
+    "09": "Menses",
+    "10": "Vacation",
+    "11": "Other",
 }
 
-_DUMP_HEADER_RE = re.compile(
-    r'P ([0-9]{3}),"[0-9A-Z]{9}","(?:MG/DL |MMOL/L)"')
+_DUMP_HEADER_RE = re.compile(r'P ([0-9]{3}),"[0-9A-Z]{9}","(?:MG/DL |MMOL/L)"')
 _DUMP_LINE_RE = re.compile(
     r'P (?P<datetime>"[A-Z]{3}","[0-9/]{8}","[0-9:]{8}   "),'
     r'"(?P<control>[C ]) (?P<value>[0-9]{3})(?P<parityerror>[\? ])",'
-    r'"(?P<meal>[NBA])","(?P<comment>0[0-9]|1[01])", 00')
+    r'"(?P<meal>[NBA])","(?P<comment>0[0-9]|1[01])", 00'
+)
+
+_RESPONSE_MATCH = re.compile(r"^(.+) ([0-9A-F]{4})\r$")
 
-_RESPONSE_MATCH = re.compile(r'^(.+) ([0-9A-F]{4})\r$')
 
 def _calculate_checksum(bytestring):
     """Calculate the checksum used by OneTouch Ultra and Ultra2 devices
@@ -66,10 +66,11 @@ def _calculate_checksum(bytestring):
     checksum = 0
 
     for byte in bytestring:
-        checksum = (checksum + byte) & 0xffff
+        checksum = (checksum + byte) & 0xFFFF
 
     return checksum
 
+
 def _validate_and_strip_checksum(line):
     """Verify the simple 16-bit checksum and remove it from the line.
 
@@ -88,20 +89,19 @@ def _validate_and_strip_checksum(line):
 
     try:
         checksum_given = int(checksum_string, 16)
-        checksum_calculated = _calculate_checksum(
-            bytes(response, 'ascii'))
+        checksum_calculated = _calculate_checksum(bytes(response, "ascii"))
 
         if checksum_given != checksum_calculated:
-            raise exceptions.InvalidChecksum(checksum_given,
-                                             checksum_calculated)
+            raise exceptions.InvalidChecksum(checksum_given, checksum_calculated)
     except ValueError:
         raise exceptions.InvalidChecksum(checksum_given, None)
 
     return response
 
+
 _DATETIME_RE = re.compile(
-    r'^"[A-Z]{3}",'
-    r'"([0-9]{2}/[0-9]{2}/[0-9]{2})","([0-9]{2}:[0-9]{2}:[0-9]{2})   "$')
+    r'^"[A-Z]{3}",' r'"([0-9]{2}/[0-9]{2}/[0-9]{2})","([0-9]{2}:[0-9]{2}:[0-9]{2})   "$'
+)
 
 
 def _parse_datetime(response):
@@ -121,8 +121,8 @@ def _parse_datetime(response):
         raise exceptions.InvalidResponse(response)
 
     date, time = match.groups()
-    month, day, year = map(int, date.split('/'))
-    hour, minute, second = map(int, time.split(':'))
+    month, day, year = map(int, date.split("/"))
+    hour, minute, second = map(int, time.split(":"))
 
     # Yes, OneTouch2's firmware is not Y2K safe.
     return datetime.datetime(2000 + year, month, day, hour, minute, second)
@@ -130,7 +130,7 @@ def _parse_datetime(response):
 
 class Device(serial.SerialDevice, driver_base.GlucometerDriver):
     BAUDRATE = 9600
-    DEFAULT_CABLE_ID = '067b:2303'  # Generic PL2303 cable.
+    DEFAULT_CABLE_ID = "067b:2303"  # Generic PL2303 cable.
 
     def connect(self):  # pylint: disable=no-self-use
         return
@@ -144,7 +144,7 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
         Args:
           cmd: command and parameters to send (without newline)
         """
-        cmdstring = bytes('\x11\r' + cmd + '\r', 'ascii')
+        cmdstring = bytes("\x11\r" + cmd + "\r", "ascii")
         self.serial_.write(cmdstring)
         self.serial_.flush()
 
@@ -160,7 +160,7 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
         """
         self._send_command(cmd)
 
-        line = self.serial_.readline().decode('ascii')
+        line = self.serial_.readline().decode("ascii")
         return _validate_and_strip_checksum(line)
 
     def get_meter_info(self):
@@ -170,11 +170,11 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
           A common.MeterInfo object.
         """
         return common.MeterInfo(
-            'OneTouch Ultra 2 glucometer',
+            "OneTouch Ultra 2 glucometer",
             serial_number=self.get_serial_number(),
-            version_info=(
-                'Software version: ' + self.get_version(),),
-            native_unit=self.get_glucose_unit())
+            version_info=("Software version: " + self.get_version(),),
+            native_unit=self.get_glucose_unit(),
+        )
 
     def get_version(self):
         """Returns an identifier of the firmware version of the glucometer.
@@ -183,9 +183,9 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
           The software version returned by the glucometer, such as
             "P02.00.00 30/08/06".
         """
-        response = self._send_oneliner_command('DM?')
+        response = self._send_oneliner_command("DM?")
 
-        if response[0] != '?':
+        if response[0] != "?":
             raise exceptions.InvalidResponse(response)
 
         return response[1:]
@@ -204,7 +204,7 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
           InvalidSerialNumber: if the returned serial number does not match
             the OneTouch2 device as per specs.
         """
-        response = self._send_oneliner_command('DM@')
+        response = self._send_oneliner_command("DM@")
 
         match = self._SERIAL_NUMBER_RE.match(response)
         if not match:
@@ -214,7 +214,7 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
 
         # 'Y' at the far right of the serial number is the indication of a
         # OneTouch Ultra2 device, as per specs.
-        if serial_number[-1] != 'Y':
+        if serial_number[-1] != "Y":
             raise lifescan.InvalidSerialNumber(serial_number)
 
         return serial_number
@@ -225,12 +225,13 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
         Returns:
           A datetime object built according to the returned response.
         """
-        response = self._send_oneliner_command('DMF')
+        response = self._send_oneliner_command("DMF")
         return _parse_datetime(response[2:])
 
     def _set_device_datetime(self, date):
         response = self._send_oneliner_command(
-            'DMT' + date.strftime('%m/%d/%y %H:%M:%S'))
+            "DMT" + date.strftime("%m/%d/%y %H:%M:%S")
+        )
         return _parse_datetime(response[2:])
 
     def zero_log(self):
@@ -239,8 +240,8 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
         This function will clear the memory of the device deleting all the
         readings in an irrecoverable way.
         """
-        response = self._send_oneliner_command('DMZ')
-        if response != 'Z':
+        response = self._send_oneliner_command("DMZ")
+        if response != "Z":
             raise exceptions.InvalidResponse(response)
 
     _GLUCOSE_UNIT_RE = re.compile(r'^SU\?,"(MG/DL |MMOL/L)"')
@@ -260,15 +261,15 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
         unit used for display. This is not settable by the user in all modern
         meters.
         """
-        response = self._send_oneliner_command('DMSU?')
+        response = self._send_oneliner_command("DMSU?")
 
         match = self._GLUCOSE_UNIT_RE.match(response)
         unit = match.group(1)
 
-        if unit == 'MG/DL ':
+        if unit == "MG/DL ":
             return common.Unit.MG_DL
 
-        if unit == 'MMOL/L':
+        if unit == "MMOL/L":
             return common.Unit.MMOL_L
 
         raise exceptions.InvalidGlucoseUnit(response)
@@ -287,10 +288,10 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
           expected.
 
         """
-        self._send_command('DMP')
+        self._send_command("DMP")
         data = self.serial_.readlines()
 
-        header = data.pop(0).decode('ascii')
+        header = data.pop(0).decode("ascii")
         match = _DUMP_HEADER_RE.match(header)
         if not match:
             raise exceptions.InvalidResponse(header)
@@ -299,7 +300,7 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
         assert count == len(data)
 
         for line in data:
-            line = _validate_and_strip_checksum(line.decode('ascii'))
+            line = _validate_and_strip_checksum(line.decode("ascii"))
 
             match = _DUMP_LINE_RE.match(line)
             if not match:
@@ -307,11 +308,12 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
 
             line_data = match.groupdict()
 
-            date = _parse_datetime(line_data['datetime'])
-            meal = _MEAL_CODES[line_data['meal']]
-            comment = _COMMENT_CODES[line_data['comment']]
+            date = _parse_datetime(line_data["datetime"])
+            meal = _MEAL_CODES[line_data["meal"]]
+            comment = _COMMENT_CODES[line_data["comment"]]
 
             # OneTouch2 always returns the data in mg/dL even if the glucometer
             # is set to mmol/L, so there is no conversion required.
             yield common.GlucoseReading(
-                date, float(line_data['value']), meal=meal, comment=comment)
+                date, float(line_data["value"]), meal=meal, comment=comment
+            )
diff --git a/glucometerutils/drivers/otultraeasy.py b/glucometerutils/drivers/otultraeasy.py
index 7f4934e..0d1e7a9 100644
--- a/glucometerutils/drivers/otultraeasy.py
+++ b/glucometerutils/drivers/otultraeasy.py
@@ -22,87 +22,97 @@ import logging
 import construct
 
 from glucometerutils import common
-from glucometerutils.support import construct_extras, driver_base, lifescan, lifescan_binary_protocol, serial
+from glucometerutils.support import (
+    construct_extras,
+    driver_base,
+    lifescan,
+    lifescan_binary_protocol,
+    serial,
+)
 
 _PACKET = lifescan_binary_protocol.LifeScanPacket(True)
 
 _INVALID_RECORD = 501
 
-_COMMAND_SUCCESS = construct.Const(b'\x05\x06')
+_COMMAND_SUCCESS = construct.Const(b"\x05\x06")
 
-_VERSION_REQUEST = construct.Const(b'\x05\x0d\x02')
+_VERSION_REQUEST = construct.Const(b"\x05\x0d\x02")
 
 _VERSION_RESPONSE = construct.Struct(
     _COMMAND_SUCCESS,
-    'version' / construct.PascalString(construct.Byte, encoding='ascii'),
+    "version" / construct.PascalString(construct.Byte, encoding="ascii"),
 )
 
 _SERIAL_NUMBER_REQUEST = construct.Const(
-    b'\x05\x0B\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00')
+    b"\x05\x0B\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00"
+)
 
 _SERIAL_NUMBER_RESPONSE = construct.Struct(
-    _COMMAND_SUCCESS,
-    'serial_number' / construct.GreedyString(encoding='ascii'),
+    _COMMAND_SUCCESS, "serial_number" / construct.GreedyString(encoding="ascii"),
 )
 
 _DATETIME_REQUEST = construct.Struct(
-    construct.Const(b'\x05\x20'),  # 0x20 is the datetime
-    'request_type' / construct.Enum(construct.Byte, write=0x01, read=0x02),
-    'timestamp' / construct.Default(
+    construct.Const(b"\x05\x20"),  # 0x20 is the datetime
+    "request_type" / construct.Enum(construct.Byte, write=0x01, read=0x02),
+    "timestamp"
+    / construct.Default(
         construct_extras.Timestamp(construct.Int32ul),  # type: ignore
-        datetime.datetime(1970, 1, 1, 0, 0)),
+        datetime.datetime(1970, 1, 1, 0, 0),
+    ),
 )
 
 _DATETIME_RESPONSE = construct.Struct(
     _COMMAND_SUCCESS,
-    'timestamp' / construct_extras.Timestamp(construct.Int32ul),  # type: ignore
+    "timestamp" / construct_extras.Timestamp(construct.Int32ul),  # type: ignore
 )
 
-_GLUCOSE_UNIT_REQUEST = construct.Const(
-    b'\x05\x09\x02\x09\x00\x00\x00\x00')
+_GLUCOSE_UNIT_REQUEST = construct.Const(b"\x05\x09\x02\x09\x00\x00\x00\x00")
 
 
 _GLUCOSE_UNIT_RESPONSE = construct.Struct(
     _COMMAND_SUCCESS,
-    'unit' / lifescan_binary_protocol.GLUCOSE_UNIT,
+    "unit" / lifescan_binary_protocol.GLUCOSE_UNIT,
     construct.Padding(3),
 )
 
-_MEMORY_ERASE_REQUEST = construct.Const(b'\x05\x1A')
+_MEMORY_ERASE_REQUEST = construct.Const(b"\x05\x1A")
 
 _READING_COUNT_RESPONSE = construct.Struct(
-    construct.Const(b'\x0f'),
-    'count' / construct.Int16ul,
+    construct.Const(b"\x0f"), "count" / construct.Int16ul,
 )
 
 _READ_RECORD_REQUEST = construct.Struct(
-    construct.Const(b'\x05\x1f'),
-    'record_id' / construct.Int16ul,
+    construct.Const(b"\x05\x1f"), "record_id" / construct.Int16ul,
 )
 
 _READING_RESPONSE = construct.Struct(
     _COMMAND_SUCCESS,
-    'timestamp' / construct_extras.Timestamp(construct.Int32ul),  # type: ignore
-    'value' / construct.Int32ul,
+    "timestamp" / construct_extras.Timestamp(construct.Int32ul),  # type: ignore
+    "value" / construct.Int32ul,
 )
 
-def _make_packet(
-        message, sequence_number, expect_receive, acknowledge, disconnect):
+
+def _make_packet(message, sequence_number, expect_receive, acknowledge, disconnect):
     return _PACKET.build(
-        {'data': {'value': {
-            'message': message,
-            'link_control': {
-                'sequence_number': sequence_number,
-                'expect_receive': expect_receive,
-                'acknowledge': acknowledge,
-                'disconnect': disconnect,
-            },
-        }}})
+        {
+            "data": {
+                "value": {
+                    "message": message,
+                    "link_control": {
+                        "sequence_number": sequence_number,
+                        "expect_receive": expect_receive,
+                        "acknowledge": acknowledge,
+                        "disconnect": disconnect,
+                    },
+                }
+            }
+        }
+    )
 
 
 class Device(serial.SerialDevice, driver_base.GlucometerDriver):
     BAUDRATE = 9600
-    DEFAULT_CABLE_ID = '067b:2303'  # Generic PL2303 cable.
+    DEFAULT_CABLE_ID = "067b:2303"  # Generic PL2303 cable.
     TIMEOUT = 0.5
 
     def __init__(self, device):
@@ -110,12 +120,11 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
 
         self.sent_counter_ = False
         self.expect_receive_ = False
-        self.buffered_reader_ = construct.Rebuffered(
-            _PACKET, tailcutoff=1024)
+        self.buffered_reader_ = construct.Rebuffered(_PACKET, tailcutoff=1024)
 
     def connect(self):
         try:
-            self._send_packet(b'', disconnect=True)
+            self._send_packet(b"", disconnect=True)
             self._read_ack()
         except construct.ConstructError as e:
             raise lifescan.MalformedCommand(str(e))
@@ -125,33 +134,32 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
 
     def _send_packet(self, message, acknowledge=False, disconnect=False):
         pkt = _make_packet(
-            message,
-            self.sent_counter_,
-            self.expect_receive_,
-            acknowledge,
-            disconnect)
-        logging.debug('sending packet: %s', binascii.hexlify(pkt))
+            message, self.sent_counter_, self.expect_receive_, acknowledge, disconnect
+        )
+        logging.debug("sending packet: %s", binascii.hexlify(pkt))
 
         self.serial_.write(pkt)
         self.serial_.flush()
 
     def _read_packet(self):
         raw_pkt = self.buffered_reader_.parse_stream(self.serial_).data
-        logging.debug('received packet: %r', raw_pkt)
+        logging.debug("received packet: %r", raw_pkt)
 
         # discard the checksum and copy
         pkt = raw_pkt.value
 
         if not pkt.link_control.disconnect and (
-                pkt.link_control.sequence_number != self.expect_receive_):
+            pkt.link_control.sequence_number != self.expect_receive_
+        ):
             raise lifescan.MalformedCommand(
-                'at position 2[0b] expected %02x, received %02x' % (
-                    self.expect_receive_, pkt.link_connect.sequence_count))
+                "at position 2[0b] expected %02x, received %02x"
+                % (self.expect_receive_, pkt.link_connect.sequence_count)
+            )
 
         return pkt
 
     def _send_ack(self):
-        self._send_packet(b'', acknowledge=True, disconnect=False)
+        self._send_packet(b"", acknowledge=True, disconnect=False)
 
     def _read_ack(self):
         pkt = self._read_packet()
@@ -177,62 +185,63 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
 
     def get_meter_info(self):
         return common.MeterInfo(
-            'OneTouch Ultra Easy glucometer',
+            "OneTouch Ultra Easy glucometer",
             serial_number=self.get_serial_number(),
-            version_info=(
-                'Software version: ' + self.get_version(),),
-            native_unit=self.get_glucose_unit())
+            version_info=("Software version: " + self.get_version(),),
+            native_unit=self.get_glucose_unit(),
+        )
 
     def get_version(self):
-        response = self._send_request(
-            _VERSION_REQUEST, None, _VERSION_RESPONSE)
+        response = self._send_request(_VERSION_REQUEST, None, _VERSION_RESPONSE)
 
         return response.version
 
     def get_serial_number(self):
         response = self._send_request(
-            _SERIAL_NUMBER_REQUEST, None, _SERIAL_NUMBER_RESPONSE)
+            _SERIAL_NUMBER_REQUEST, None, _SERIAL_NUMBER_RESPONSE
+        )
 
         return response.serial_number
 
     def get_datetime(self):
         response = self._send_request(
-            _DATETIME_REQUEST, {'request_type': 'read'},
-            _DATETIME_RESPONSE)
+            _DATETIME_REQUEST, {"request_type": "read"}, _DATETIME_RESPONSE
+        )
 
         return response.timestamp
 
     def _set_device_datetime(self, date):
         response = self._send_request(
-            _DATETIME_REQUEST, {
-                'request_type': 'write',
-                'timestamp': date,
-            }, _DATETIME_RESPONSE)
+            _DATETIME_REQUEST,
+            {"request_type": "write", "timestamp": date,},
+            _DATETIME_RESPONSE,
+        )
         return response.timestamp
 
     def zero_log(self):
-        self._send_request(
-            _MEMORY_ERASE_REQUEST, None,
-            _COMMAND_SUCCESS)
+        self._send_request(_MEMORY_ERASE_REQUEST, None, _COMMAND_SUCCESS)
 
     def get_glucose_unit(self):
         response = self._send_request(
-            _GLUCOSE_UNIT_REQUEST, None, _GLUCOSE_UNIT_RESPONSE)
+            _GLUCOSE_UNIT_REQUEST, None, _GLUCOSE_UNIT_RESPONSE
+        )
 
         return response.unit
 
     def _get_reading_count(self):
         response = self._send_request(
-            _READ_RECORD_REQUEST, {'record_id': _INVALID_RECORD},
-            _READING_COUNT_RESPONSE)
+            _READ_RECORD_REQUEST,
+            {"record_id": _INVALID_RECORD},
+            _READING_COUNT_RESPONSE,
+        )
         return response.count
 
     def _get_reading(self, record_id):
         response = self._send_request(
-            _READ_RECORD_REQUEST, {'record_id': record_id}, _READING_RESPONSE)
+            _READ_RECORD_REQUEST, {"record_id": record_id}, _READING_RESPONSE
+        )
 
-        return common.GlucoseReading(
-            response.timestamp, float(response.value))
+        return common.GlucoseReading(response.timestamp, float(response.value))
 
     def get_readings(self):
         record_count = self._get_reading_count()
diff --git a/glucometerutils/drivers/otverio2015.py b/glucometerutils/drivers/otverio2015.py
index bde0af3..b8429ea 100644
--- a/glucometerutils/drivers/otverio2015.py
+++ b/glucometerutils/drivers/otverio2015.py
@@ -29,67 +29,61 @@ import construct
 from pyscsi.pyscsi.scsi import SCSI
 from pyscsi.pyscsi.scsi_device import SCSIDevice
 
-from glucometerutils import common
-from glucometerutils import exceptions
+from glucometerutils import common, exceptions
 from glucometerutils.support import driver_base, lifescan, lifescan_binary_protocol
 
 # This device uses SCSI blocks as registers.
 _REGISTER_SIZE = 512
 
 _PACKET = construct.Padded(
-    _REGISTER_SIZE,
-    lifescan_binary_protocol.LifeScanPacket(False))
+    _REGISTER_SIZE, lifescan_binary_protocol.LifeScanPacket(False)
+)
 
-_COMMAND_SUCCESS = construct.Const(b'\x03\x06')
+_COMMAND_SUCCESS = construct.Const(b"\x03\x06")
 
 _QUERY_REQUEST = construct.Struct(
-    construct.Const(b'\x03\xe6\x02'),
-    'selector' / construct.Enum(
-        construct.Byte, serial=0x00, model=0x01, software=0x02),
+    construct.Const(b"\x03\xe6\x02"),
+    "selector" / construct.Enum(construct.Byte, serial=0x00, model=0x01, software=0x02),
 )
 
 _QUERY_RESPONSE = construct.Struct(
-    construct.Const(b'\x03\x06'),
-    'value' / construct.CString(encoding='utf-16-le'),
+    construct.Const(b"\x03\x06"), "value" / construct.CString(encoding="utf-16-le"),
 )
 
 _READ_PARAMETER_REQUEST = construct.Struct(
-    construct.Const(b'\x03'),
-    'selector' / construct.Enum(
-        construct.Byte, unit=0x04),
+    construct.Const(b"\x03"), "selector" / construct.Enum(construct.Byte, unit=0x04),
 )
 
 _READ_UNIT_RESPONSE = construct.Struct(
     _COMMAND_SUCCESS,
-    'unit' / lifescan_binary_protocol.GLUCOSE_UNIT,
+    "unit" / lifescan_binary_protocol.GLUCOSE_UNIT,
     construct.Padding(3),
 )
 
-_READ_RTC_REQUEST = construct.Const(b'\x03\x20\x02')
+_READ_RTC_REQUEST = construct.Const(b"\x03\x20\x02")
 
 _READ_RTC_RESPONSE = construct.Struct(
     _COMMAND_SUCCESS,
-    'timestamp' / lifescan_binary_protocol.VERIO_TIMESTAMP,  # type: ignore
+    "timestamp" / lifescan_binary_protocol.VERIO_TIMESTAMP,  # type: ignore
 )
 
 _WRITE_RTC_REQUEST = construct.Struct(
-    construct.Const(b'\x03\x20\x01'),
-    'timestamp' / lifescan_binary_protocol.VERIO_TIMESTAMP,  # type: ignore
+    construct.Const(b"\x03\x20\x01"),
+    "timestamp" / lifescan_binary_protocol.VERIO_TIMESTAMP,  # type: ignore
 )
 
-_MEMORY_ERASE_REQUEST = construct.Const(b'\x03\x1a')
+_MEMORY_ERASE_REQUEST = construct.Const(b"\x03\x1a")
 
-_READ_RECORD_COUNT_REQUEST = construct.Const(b'\x03\x27\x00')
+_READ_RECORD_COUNT_REQUEST = construct.Const(b"\x03\x27\x00")
 
 _READ_RECORD_COUNT_RESPONSE = construct.Struct(
-    _COMMAND_SUCCESS,
-    'count' / construct.Int16ul,
+    _COMMAND_SUCCESS, "count" / construct.Int16ul,
 )
 
 _READ_RECORD_REQUEST = construct.Struct(
-    construct.Const(b'\x03\x31\x02'),
-    'record_id' / construct.Int16ul,
-    construct.Const(b'\x00'),
+    construct.Const(b"\x03\x31\x02"),
+    "record_id" / construct.Int16ul,
+    construct.Const(b"\x00"),
 )
 
 _MEAL_FLAG = {
@@ -100,13 +94,12 @@ _MEAL_FLAG = {
 
 _READ_RECORD_RESPONSE = construct.Struct(
     _COMMAND_SUCCESS,
-    'inverse_counter' / construct.Int16ul,
+    "inverse_counter" / construct.Int16ul,
     construct.Padding(1),
-    'lifetime_counter' / construct.Int16ul,
-    'timestamp' / lifescan_binary_protocol.VERIO_TIMESTAMP,  # type: ignore
-    'value' / construct.Int16ul,
-    'meal' / construct.Mapping(
-        construct.Byte, _MEAL_FLAG),
+    "lifetime_counter" / construct.Int16ul,
+    "timestamp" / lifescan_binary_protocol.VERIO_TIMESTAMP,  # type: ignore
+    "value" / construct.Int16ul,
+    "meal" / construct.Mapping(construct.Byte, _MEAL_FLAG),
     construct.Padding(4),
 )
 
@@ -115,8 +108,9 @@ class Device(driver_base.GlucometerDriver):
     def __init__(self, device):
         if not device:
             raise exceptions.CommandLineError(
-                '--device parameter is required, should point to the disk '
-                'device representing the meter.')
+                "--device parameter is required, should point to the disk "
+                "device representing the meter."
+            )
 
         self.device_name_ = device
         self.scsi_device_ = SCSIDevice(device, readwrite=True)
@@ -125,11 +119,12 @@ class Device(driver_base.GlucometerDriver):
 
     def connect(self):
         inq = self.scsi_.inquiry()
-        logging.debug('Device connected: %r', inq.result)
-        vendor = inq.result['t10_vendor_identification'][:32]
-        if vendor != b'LifeScan':
+        logging.debug("Device connected: %r", inq.result)
+        vendor = inq.result["t10_vendor_identification"][:32]
+        if vendor != b"LifeScan":
             raise exceptions.ConnectionFailed(
-                'Device %s is not a LifeScan glucometer.' % self.device_name_)
+                "Device %s is not a LifeScan glucometer." % self.device_name_
+            )
 
     def disconnect(self):  # pylint: disable=no-self-use
         return
@@ -155,21 +150,19 @@ class Device(driver_base.GlucometerDriver):
         """
         try:
             request = request_format.build(request_obj)
-            request_raw = _PACKET.build({'data': {'value': {
-                'message': request,
-            }}})
-            logging.debug(
-                'Request sent: %s', binascii.hexlify(request_raw))
+            request_raw = _PACKET.build({"data": {"value": {"message": request,}}})
+            logging.debug("Request sent: %s", binascii.hexlify(request_raw))
             self.scsi_.write10(lba, 1, request_raw)
 
             response_raw = self.scsi_.read10(lba, 1)
             logging.debug(
-                'Response received: %s', binascii.hexlify(response_raw.datain))
+                "Response received: %s", binascii.hexlify(response_raw.datain)
+            )
             response_pkt = _PACKET.parse(response_raw.datain).data
-            logging.debug('Response packet: %r', response_pkt)
+            logging.debug("Response packet: %r", response_pkt)
 
             response = response_format.parse(response_pkt.value.message)
-            logging.debug('Response parsed: %r', response)
+            logging.debug("Response parsed: %r", response)
 
             return response
         except construct.ConstructError as e:
@@ -177,60 +170,58 @@ class Device(driver_base.GlucometerDriver):
 
     def _query_string(self, selector):
         response = self._send_request(
-            3, _QUERY_REQUEST, {'selector': selector}, _QUERY_RESPONSE)
+            3, _QUERY_REQUEST, {"selector": selector}, _QUERY_RESPONSE
+        )
 
         return response.value
 
     def get_meter_info(self):
         return common.MeterInfo(
-            'OneTouch %s glucometer' % self._query_string('model'),
+            "OneTouch %s glucometer" % self._query_string("model"),
             serial_number=self.get_serial_number(),
-            version_info=(
-                'Software version: ' + self.get_version(),),
-            native_unit=self.get_glucose_unit())
+            version_info=("Software version: " + self.get_version(),),
+            native_unit=self.get_glucose_unit(),
+        )
 
     def get_serial_number(self):
-        return self._query_string('serial')
+        return self._query_string("serial")
 
     def get_version(self):
-        return self._query_string('software')
+        return self._query_string("software")
 
     def get_datetime(self):
-        response = self._send_request(
-            3, _READ_RTC_REQUEST, None, _READ_RTC_RESPONSE)
+        response = self._send_request(3, _READ_RTC_REQUEST, None, _READ_RTC_RESPONSE)
         return response.timestamp
 
     def _set_device_datetime(self, date):
-        self._send_request(
-            3, _WRITE_RTC_REQUEST, {'timestamp': date},
-            _COMMAND_SUCCESS)
+        self._send_request(3, _WRITE_RTC_REQUEST, {"timestamp": date}, _COMMAND_SUCCESS)
 
         # The device does not return the new datetime, so confirm by calling
         # READ RTC again.
         return self.get_datetime()
 
     def zero_log(self):
-        self._send_request(
-            3, _MEMORY_ERASE_REQUEST, None,
-            _COMMAND_SUCCESS)
+        self._send_request(3, _MEMORY_ERASE_REQUEST, None, _COMMAND_SUCCESS)
 
     def get_glucose_unit(self):
         response = self._send_request(
-            4, _READ_PARAMETER_REQUEST, {'selector': 'unit'},
-            _READ_UNIT_RESPONSE)
+            4, _READ_PARAMETER_REQUEST, {"selector": "unit"}, _READ_UNIT_RESPONSE
+        )
         return response.unit
 
     def _get_reading_count(self):
         response = self._send_request(
-            3, _READ_RECORD_COUNT_REQUEST, None, _READ_RECORD_COUNT_RESPONSE)
+            3, _READ_RECORD_COUNT_REQUEST, None, _READ_RECORD_COUNT_RESPONSE
+        )
         return response.count
 
     def _get_reading(self, record_id):
         response = self._send_request(
-            3, _READ_RECORD_REQUEST, {'record_id': record_id},
-            _READ_RECORD_RESPONSE)
+            3, _READ_RECORD_REQUEST, {"record_id": record_id}, _READ_RECORD_RESPONSE
+        )
         return common.GlucoseReading(
-            response.timestamp, float(response.value), meal=response.meal)
+            response.timestamp, float(response.value), meal=response.meal
+        )
 
     def get_readings(self):
         record_count = self._get_reading_count()
diff --git a/glucometerutils/drivers/otverioiq.py b/glucometerutils/drivers/otverioiq.py
index 69bdac9..24327ef 100644
--- a/glucometerutils/drivers/otverioiq.py
+++ b/glucometerutils/drivers/otverioiq.py
@@ -21,63 +21,63 @@ import logging
 import construct
 
 from glucometerutils import common
-from glucometerutils.support import driver_base, lifescan, lifescan_binary_protocol, serial
+from glucometerutils.support import (
+    driver_base,
+    lifescan,
+    lifescan_binary_protocol,
+    serial,
+)
 
 _PACKET = lifescan_binary_protocol.LifeScanPacket(False)
 
-_COMMAND_SUCCESS = construct.Const(b'\x03\x06')
+_COMMAND_SUCCESS = construct.Const(b"\x03\x06")
 
-_VERSION_REQUEST = construct.Const(b'\x03\x0d\x01')
+_VERSION_REQUEST = construct.Const(b"\x03\x0d\x01")
 
 _VERSION_RESPONSE = construct.Struct(
     _COMMAND_SUCCESS,
-    'version' / construct.PascalString(construct.Byte, encoding='ascii'),
+    "version" / construct.PascalString(construct.Byte, encoding="ascii"),
     # NULL-termination is not included in string length.
-    construct.Const(b'\x00'),
+    construct.Const(b"\x00"),
 )
 
-_SERIAL_NUMBER_REQUEST = construct.Const(
-    b'\x03\x0b\x01\x02')
+_SERIAL_NUMBER_REQUEST = construct.Const(b"\x03\x0b\x01\x02")
 
 _SERIAL_NUMBER_RESPONSE = construct.Struct(
-    _COMMAND_SUCCESS,
-    'serial_number' / construct.CString(encoding='ascii'),
+    _COMMAND_SUCCESS, "serial_number" / construct.CString(encoding="ascii"),
 )
 
-_READ_RTC_REQUEST = construct.Const(b'\x03\x20\x02')
+_READ_RTC_REQUEST = construct.Const(b"\x03\x20\x02")
 
 _READ_RTC_RESPONSE = construct.Struct(
     _COMMAND_SUCCESS,
-    'timestamp' / lifescan_binary_protocol.VERIO_TIMESTAMP,  # type: ignore
+    "timestamp" / lifescan_binary_protocol.VERIO_TIMESTAMP,  # type: ignore
 )
 
 _WRITE_RTC_REQUEST = construct.Struct(
-    construct.Const(b'\x03\x20\x01'),
-    'timestamp' / lifescan_binary_protocol.VERIO_TIMESTAMP,  # type: ignore
+    construct.Const(b"\x03\x20\x01"),
+    "timestamp" / lifescan_binary_protocol.VERIO_TIMESTAMP,  # type: ignore
 )
 
-_GLUCOSE_UNIT_REQUEST = construct.Const(
-    b'\x03\x09\x02\x02')
+_GLUCOSE_UNIT_REQUEST = construct.Const(b"\x03\x09\x02\x02")
 
 
 _GLUCOSE_UNIT_RESPONSE = construct.Struct(
     _COMMAND_SUCCESS,
-    'unit' / lifescan_binary_protocol.GLUCOSE_UNIT,
+    "unit" / lifescan_binary_protocol.GLUCOSE_UNIT,
     construct.Padding(3),
 )
 
-_MEMORY_ERASE_REQUEST = construct.Const(b'\x03\x1a')
+_MEMORY_ERASE_REQUEST = construct.Const(b"\x03\x1a")
 
-_READ_RECORD_COUNT_REQUEST = construct.Const(b'\x03\x27\x00')
+_READ_RECORD_COUNT_REQUEST = construct.Const(b"\x03\x27\x00")
 
 _READ_RECORD_COUNT_RESPONSE = construct.Struct(
-    _COMMAND_SUCCESS,
-    'count' / construct.Int16ul,
+    _COMMAND_SUCCESS, "count" / construct.Int16ul,
 )
 
 _READ_RECORD_REQUEST = construct.Struct(
-    construct.Const(b'\x03\x21'),
-    'record_id' / construct.Int16ul,
+    construct.Const(b"\x03\x21"), "record_id" / construct.Int16ul,
 )
 
 _MEAL_FLAG = {
@@ -88,18 +88,17 @@ _MEAL_FLAG = {
 
 _READING_RESPONSE = construct.Struct(
     _COMMAND_SUCCESS,
-    'timestamp' / lifescan_binary_protocol.VERIO_TIMESTAMP,  # type: ignore
-    'value' / construct.Int16ul,
-    'control_test' / construct.Flag,
-    'meal' / construct.Mapping(
-        construct.Byte, _MEAL_FLAG),
+    "timestamp" / lifescan_binary_protocol.VERIO_TIMESTAMP,  # type: ignore
+    "value" / construct.Int16ul,
+    "control_test" / construct.Flag,
+    "meal" / construct.Mapping(construct.Byte, _MEAL_FLAG),
     construct.Padding(2),  # unknown
 )
 
 
 class Device(serial.SerialDevice, driver_base.GlucometerDriver):
     BAUDRATE = 38400
-    DEFAULT_CABLE_ID = '10c4:85a7'  # Specific ID for embedded cp210x
+    DEFAULT_CABLE_ID = "10c4:85a7"  # Specific ID for embedded cp210x
     TIMEOUT = 0.5
 
     def __init__(self, device):
@@ -107,18 +106,15 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
         self.buffered_reader_ = construct.Rebuffered(_PACKET, tailcutoff=1024)
 
     def _send_packet(self, message):
-        pkt = _PACKET.build(
-            {'data': {'value': {
-                'message': message,
-            }}})
-        logging.debug('sending packet: %s', binascii.hexlify(pkt))
+        pkt = _PACKET.build({"data": {"value": {"message": message,}}})
+        logging.debug("sending packet: %s", binascii.hexlify(pkt))
 
         self.serial_.write(pkt)
         self.serial_.flush()
 
     def _read_packet(self):
         raw_pkt = self.buffered_reader_.parse_stream(self.serial_).data
-        logging.debug('received packet: %r', raw_pkt)
+        logging.debug("received packet: %r", raw_pkt)
 
         # discard the checksum and copy
         pkt = raw_pkt.value
@@ -138,66 +134,64 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
 
     def get_meter_info(self):
         return common.MeterInfo(
-            'OneTouch Verio IQ glucometer',
+            "OneTouch Verio IQ glucometer",
             serial_number=self.get_serial_number(),
-            version_info=(
-                'Software version: ' + self.get_version(),),
-            native_unit=self.get_glucose_unit())
+            version_info=("Software version: " + self.get_version(),),
+            native_unit=self.get_glucose_unit(),
+        )
 
     def get_version(self):
-        response = self._send_request(
-            _VERSION_REQUEST, None, _VERSION_RESPONSE)
+        response = self._send_request(_VERSION_REQUEST, None, _VERSION_RESPONSE)
 
         return response.version
 
     def get_serial_number(self):
         response = self._send_request(
-            _SERIAL_NUMBER_REQUEST, None, _SERIAL_NUMBER_RESPONSE)
+            _SERIAL_NUMBER_REQUEST, None, _SERIAL_NUMBER_RESPONSE
+        )
 
         return response.serial_number
 
     def get_datetime(self):
-        response = self._send_request(
-            _READ_RTC_REQUEST, None, _READ_RTC_RESPONSE)
+        response = self._send_request(_READ_RTC_REQUEST, None, _READ_RTC_RESPONSE)
 
         return response.timestamp
 
     def _set_device_datetime(self, date):
-        self._send_request(
-            _WRITE_RTC_REQUEST, {
-                'timestamp': date,
-            }, _COMMAND_SUCCESS)
+        self._send_request(_WRITE_RTC_REQUEST, {"timestamp": date,}, _COMMAND_SUCCESS)
 
         # The device does not return the new datetime, so confirm by calling
         # READ RTC again.
         return self.get_datetime()
 
     def zero_log(self):
-        self._send_request(
-            _MEMORY_ERASE_REQUEST, None,
-            _COMMAND_SUCCESS)
+        self._send_request(_MEMORY_ERASE_REQUEST, None, _COMMAND_SUCCESS)
 
     def get_glucose_unit(self):
         response = self._send_request(
-            _GLUCOSE_UNIT_REQUEST, None, _GLUCOSE_UNIT_RESPONSE)
+            _GLUCOSE_UNIT_REQUEST, None, _GLUCOSE_UNIT_RESPONSE
+        )
 
         return response.unit
 
     def _get_reading_count(self):
         response = self._send_request(
-            _READ_RECORD_COUNT_REQUEST, None, _READ_RECORD_COUNT_RESPONSE)
+            _READ_RECORD_COUNT_REQUEST, None, _READ_RECORD_COUNT_RESPONSE
+        )
         return response.count
 
     def _get_reading(self, record_id):
         response = self._send_request(
-            _READ_RECORD_REQUEST, {'record_id': record_id}, _READING_RESPONSE)
+            _READ_RECORD_REQUEST, {"record_id": record_id}, _READING_RESPONSE
+        )
 
         if response.control_test:
-            logging.debug('control solution test, ignoring.')
+            logging.debug("control solution test, ignoring.")
             return None
 
         return common.GlucoseReading(
-            response.timestamp, float(response.value), meal=response.meal)
+            response.timestamp, float(response.value), meal=response.meal
+        )
 
     def get_readings(self):
         record_count = self._get_reading_count()
diff --git a/glucometerutils/drivers/sdcodefree.py b/glucometerutils/drivers/sdcodefree.py
index a6e2ce5..47dd9ca 100644
--- a/glucometerutils/drivers/sdcodefree.py
+++ b/glucometerutils/drivers/sdcodefree.py
@@ -24,46 +24,44 @@ import operator
 
 import construct
 
-from glucometerutils import common
-from glucometerutils import exceptions
-from glucometerutils.support import serial, driver_base
+from glucometerutils import common, exceptions
+from glucometerutils.support import driver_base, serial
 
 
 def xor_checksum(msg):
     return functools.reduce(operator.xor, msg)
 
+
 class Direction(enum.Enum):
     In = 0x20
     Out = 0x10
 
+
 _PACKET = construct.Struct(
-    'stx' / construct.Const(0x53, construct.Byte),
-    'direction' / construct.Mapping(
-        construct.Byte,
-        {e: e.value for e in Direction}),
-    'length' / construct.Rebuild(
-        construct.Byte, lambda this: len(this.message) + 2),
-    'message' / construct.Bytes(lambda this: this.length - 2),
-    'checksum' / construct.Checksum(
-        construct.Byte, xor_checksum, construct.this.message),
-    'etx' / construct.Const(0xAA, construct.Byte)
+    "stx" / construct.Const(0x53, construct.Byte),
+    "direction" / construct.Mapping(construct.Byte, {e: e.value for e in Direction}),
+    "length" / construct.Rebuild(construct.Byte, lambda this: len(this.message) + 2),
+    "message" / construct.Bytes(lambda this: this.length - 2),
+    "checksum"
+    / construct.Checksum(construct.Byte, xor_checksum, construct.this.message),
+    "etx" / construct.Const(0xAA, construct.Byte),
 )
 
 _FIRST_MESSAGE = construct.Struct(
     construct.Const(0x30, construct.Byte),
-    'count' / construct.Int16ub,
+    "count" / construct.Int16ub,
     construct.Const(0xAA, construct.Byte)[19],
 )
 
-_CHALLENGE_PACKET_FULL = b'\x53\x20\x04\x10\x30\x20\xAA'
-_RESPONSE_MESSAGE = b'\x10\x40'
+_CHALLENGE_PACKET_FULL = b"\x53\x20\x04\x10\x30\x20\xAA"
+_RESPONSE_MESSAGE = b"\x10\x40"
 
-_DATE_SET_MESSAGE = b'\x10\x10'
+_DATE_SET_MESSAGE = b"\x10\x10"
 
-_DISCONNECT_MESSAGE = b'\x10\x60'
-_DISCONNECTED_MESSAGE = b'\x10\x70'
+_DISCONNECT_MESSAGE = b"\x10\x60"
+_DISCONNECTED_MESSAGE = b"\x10\x70"
 
-_FETCH_MESSAGE = b'\x10\x60'
+_FETCH_MESSAGE = b"\x10\x60"
 
 _MEAL_FLAG = {
     common.Meal.NONE: 0x00,
@@ -73,67 +71,64 @@ _MEAL_FLAG = {
 
 _READING = construct.Struct(
     construct.Byte[2],
-    'year' / construct.Byte,
-    'month' / construct.Byte,
-    'day' / construct.Byte,
-    'hour' / construct.Byte,
-    'minute' / construct.Byte,
-    'value' / construct.Int16ub,
-    'meal' / construct.Mapping(
-        construct.Byte, _MEAL_FLAG),
+    "year" / construct.Byte,
+    "month" / construct.Byte,
+    "day" / construct.Byte,
+    "hour" / construct.Byte,
+    "minute" / construct.Byte,
+    "value" / construct.Int16ub,
+    "meal" / construct.Mapping(construct.Byte, _MEAL_FLAG),
     construct.Byte[7],
 )
 
 
 class Device(serial.SerialDevice, driver_base.GlucometerDriver):
     BAUDRATE = 38400
-    DEFAULT_CABLE_ID = '10c4:ea60'  # Generic cable.
+    DEFAULT_CABLE_ID = "10c4:ea60"  # Generic cable.
     TIMEOUT = 300  # We need to wait for data from the device.
 
     def read_message(self):
         pkt = _PACKET.parse_stream(self.serial_)
-        logging.debug('received packet: %r', pkt)
+        logging.debug("received packet: %r", pkt)
         return pkt.message
 
     def wait_and_ready(self):
 
-        challenge = b'\0'
-        while challenge == b'\0':
+        challenge = b"\0"
+        while challenge == b"\0":
             challenge = self.serial_.read(1)
 
             # The first packet read may have a prefixed zero, it might be a bug
             # in the cp210x driver or device, but discard it if found.
-            if challenge == b'\0':
-                logging.debug('spurious null byte received')
+            if challenge == b"\0":
+                logging.debug("spurious null byte received")
                 continue
-            if challenge != b'\x53':
+            if challenge != b"\x53":
                 raise exceptions.ConnectionFailed(
-                    message='Unexpected starting bytes %r' % challenge)
+                    message="Unexpected starting bytes %r" % challenge
+                )
 
         challenge += self.serial_.read(6)
 
         if challenge != _CHALLENGE_PACKET_FULL:
             raise exceptions.ConnectionFailed(
-                message='Unexpected challenge %r' % challenge)
+                message="Unexpected challenge %r" % challenge
+            )
 
-        logging.debug(
-            'challenge packet received: %s', binascii.hexlify(challenge))
+        logging.debug("challenge packet received: %s", binascii.hexlify(challenge))
 
         self.send_message(_RESPONSE_MESSAGE)
 
         # The first packet only contains the counter of how many readings are
         # available.
         first_message = _FIRST_MESSAGE.parse(self.read_message())
-        logging.debug('received first message: %r', first_message)
+        logging.debug("received first message: %r", first_message)
 
         return first_message.count
 
     def send_message(self, message):
-        pkt = _PACKET.build({
-            'message': message,
-            'direction': Direction.Out
-        })
-        logging.debug('sending packet: %s', binascii.hexlify(pkt))
+        pkt = _PACKET.build({"message": message, "direction": Direction.Out})
+        logging.debug("sending packet: %s", binascii.hexlify(pkt))
         self.serial_.write(pkt)
 
     def connect(self):  # pylint: disable=no-self-use
@@ -146,7 +141,7 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
             raise exceptions.InvalidResponse(response=response)
 
     def get_meter_info(self):  # pylint: disable=no-self-use
-        return common.MeterInfo('SD CodeFree glucometer')
+        return common.MeterInfo("SD CodeFree glucometer")
 
     def get_version(self):  # pylint: disable=no-self-use
         raise NotImplementedError
@@ -162,7 +157,7 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
         raise NotImplementedError
 
     def _set_device_datetime(self, date):
-        setdatecmd = date.strftime('ADATE%Y%m%d%H%M').encode('ascii')
+        setdatecmd = date.strftime("ADATE%Y%m%d%H%M").encode("ascii")
 
         # Ignore the readings count.
         self.wait_and_ready()
@@ -173,8 +168,9 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
             raise exceptions.InvalidResponse(response=response)
 
         # The date we return should only include up to minute, unfortunately.
-        return datetime.datetime(date.year, date.month, date.day,
-                                 date.hour, date.minute)
+        return datetime.datetime(
+            date.year, date.month, date.day, date.hour, date.minute
+        )
 
     def zero_log(self):
         raise NotImplementedError
@@ -187,10 +183,16 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
             message = self.read_message()
 
             reading = _READING.parse(message)
-            logging.debug('received reading: %r', reading)
+            logging.debug("received reading: %r", reading)
 
             yield common.GlucoseReading(
                 datetime.datetime(
-                    2000 + reading.year, reading.month,
-                    reading.day, reading.hour, reading.minute),
-                reading.value, meal=reading.meal)
+                    2000 + reading.year,
+                    reading.month,
+                    reading.day,
+                    reading.hour,
+                    reading.minute,
+                ),
+                reading.value,
+                meal=reading.meal,
+            )
diff --git a/glucometerutils/drivers/td4277.py b/glucometerutils/drivers/td4277.py
index 4ab25ee..0385299 100644
--- a/glucometerutils/drivers/td4277.py
+++ b/glucometerutils/drivers/td4277.py
@@ -21,14 +21,13 @@ import operator
 
 import construct
 
-from glucometerutils import common
-from glucometerutils import exceptions
-from glucometerutils.support import serial, driver_base
+from glucometerutils import common, exceptions
+from glucometerutils.support import driver_base, serial
 
 
 class Direction(enum.Enum):
-    In = 0xa5
-    Out = 0xa3
+    In = 0xA5
+    Out = 0xA3
 
 
 def byte_checksum(data):
@@ -36,18 +35,18 @@ def byte_checksum(data):
 
 
 _PACKET = construct.Struct(
-    'data' / construct.RawCopy(
+    "data"
+    / construct.RawCopy(
         construct.Struct(
-            construct.Const(b'\x51'),
-            'command' / construct.Byte,
-            'message' / construct.Bytes(4),
-            'direction' / construct.Mapping(
-                construct.Byte,
-                {e: e.value for e in Direction}),
+            construct.Const(b"\x51"),
+            "command" / construct.Byte,
+            "message" / construct.Bytes(4),
+            "direction"
+            / construct.Mapping(construct.Byte, {e: e.value for e in Direction}),
         ),
     ),
-    'checksum' / construct.Checksum(
-        construct.Byte, byte_checksum, construct.this.data.data),
+    "checksum"
+    / construct.Checksum(construct.Byte, byte_checksum, construct.this.data.data),
 )
 
 _EMPTY_MESSAGE = 0
@@ -60,38 +59,32 @@ _SET_DATETIME = 0x33
 
 _GET_MODEL = 0x24
 
-_GET_READING_COUNT = 0x2b
+_GET_READING_COUNT = 0x2B
 _GET_READING_DATETIME = 0x25
 _GET_READING_VALUE = 0x26
 
 _CLEAR_MEMORY = 0x52
 
 _MODEL_STRUCT = construct.Struct(
-    construct.Const(b'\x77\x42'),
-    construct.Byte,
-    construct.Byte,
+    construct.Const(b"\x77\x42"), construct.Byte, construct.Byte,
 )
 
 _DATETIME_STRUCT = construct.Struct(
-    'day' / construct.Int16ul,
-    'minute' / construct.Byte,
-    'hour' / construct.Byte,
+    "day" / construct.Int16ul, "minute" / construct.Byte, "hour" / construct.Byte,
 )
 
 _DAY_BITSTRUCT = construct.BitStruct(
-    'year' / construct.BitsInteger(7),
-    'month' / construct.BitsInteger(4),
-    'day' / construct.BitsInteger(5),
+    "year" / construct.BitsInteger(7),
+    "month" / construct.BitsInteger(4),
+    "day" / construct.BitsInteger(5),
 )
 
 _READING_COUNT_STRUCT = construct.Struct(
-    'count' / construct.Int16ul,
-    construct.Int16ul,
+    "count" / construct.Int16ul, construct.Int16ul,
 )
 
 _READING_SELECTION_STRUCT = construct.Struct(
-    'record_id' / construct.Int16ul,
-    construct.Const(b'\x00\x00'),
+    "record_id" / construct.Int16ul, construct.Const(b"\x00\x00"),
 )
 
 _MEAL_FLAG = {
@@ -101,21 +94,24 @@ _MEAL_FLAG = {
 }
 
 _READING_VALUE_STRUCT = construct.Struct(
-    'value' / construct.Int16ul,
-    construct.Const(b'\x06'),
-    'meal'/ construct.Mapping(
-        construct.Byte, _MEAL_FLAG),
+    "value" / construct.Int16ul,
+    construct.Const(b"\x06"),
+    "meal" / construct.Mapping(construct.Byte, _MEAL_FLAG),
 )
 
+
 def _make_packet(command, message, direction=Direction.Out):
     return _PACKET.build(
-        {'data': {
-            'value': {
-                'command': command,
-                'message': message,
-                'direction': direction,
-            },
-        }})
+        {
+            "data": {
+                "value": {
+                    "command": command,
+                    "message": message,
+                    "direction": direction,
+                },
+            }
+        }
+    )
 
 
 def _parse_datetime(message):
@@ -124,11 +120,12 @@ def _parse_datetime(message):
     # unfortunately.
     day = _DAY_BITSTRUCT.parse(construct.Int16ub.build(date.day))
     return datetime.datetime(
-        2000+day.year, day.month, day.day, date.hour, date.minute)
+        2000 + day.year, day.month, day.day, date.hour, date.minute
+    )
 
 
 def _select_record(record_id):
-    return _READING_SELECTION_STRUCT.build({'record_id': record_id})
+    return _READING_SELECTION_STRUCT.build({"record_id": record_id})
 
 
 class Device(serial.SerialDevice, driver_base.GlucometerDriver):
@@ -137,19 +134,17 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
     TIMEOUT = 0.5
 
     def __init__(self, device):
-        super(Device, self).__init__('cp2110://' + device)
-        self.buffered_reader_ = construct.Rebuffered(
-            _PACKET, tailcutoff=1024)
+        super(Device, self).__init__("cp2110://" + device)
+        self.buffered_reader_ = construct.Rebuffered(_PACKET, tailcutoff=1024)
 
-    def _send_command(
-            self, command, message=_EMPTY_MESSAGE, validate_response=True):
+    def _send_command(self, command, message=_EMPTY_MESSAGE, validate_response=True):
         pkt = _make_packet(command, message)
-        logging.debug('sending packet: %s', binascii.hexlify(pkt))
+        logging.debug("sending packet: %s", binascii.hexlify(pkt))
 
         self.serial_.write(pkt)
         self.serial_.flush()
         response = self.buffered_reader_.parse_stream(self.serial_)
-        logging.debug('received packet: %r', response)
+        logging.debug("received packet: %r", response)
 
         if validate_response and response.data.value.command != command:
             raise InvalidResponse(response)
@@ -158,24 +153,26 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
 
     def connect(self):
         response_command, message = self._send_command(
-            _CONNECT_REQUEST, validate_response=False)
+            _CONNECT_REQUEST, validate_response=False
+        )
         if response_command not in _VALID_CONNECT_RESPONSE:
             raise exceptions.ConnectionFailed(
-                'Invalid response received: %2x %r' % (
-                    response_command, message))
+                "Invalid response received: %2x %r" % (response_command, message)
+            )
 
         _, model_message = self._send_command(_GET_MODEL)
         try:
             _MODEL_STRUCT.parse(model_message)
         except construct.ConstructError:
             raise exceptions.ConnectionFailed(
-                'Invalid model identified: %r' % model_message)
+                "Invalid model identified: %r" % model_message
+            )
 
     def disconnect(self):
         pass
 
     def get_meter_info(self):
-        return common.MeterInfo('TaiDoc TD-4277 glucometer')
+        return common.MeterInfo("TaiDoc TD-4277 glucometer")
 
     def get_version(self):  # pylint: disable=no-self-use
         raise NotImplementedError
@@ -191,18 +188,15 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
     def _set_device_datetime(self, date):
         assert date.year >= 2000
 
-        day_struct = _DAY_BITSTRUCT.build({
-            'year': date.year - 2000,
-            'month': date.month,
-            'day': date.day,
-        })
+        day_struct = _DAY_BITSTRUCT.build(
+            {"year": date.year - 2000, "month": date.month, "day": date.day,}
+        )
 
         day_word = construct.Int16ub.parse(day_struct)
 
-        date_message = _DATETIME_STRUCT.build({
-            'day': day_word,
-            'minute': date.minute,
-            'hour': date.hour})
+        date_message = _DATETIME_STRUCT.build(
+            {"day": day_word, "minute": date.minute, "hour": date.hour}
+        )
 
         _, message = self._send_command(_SET_DATETIME, message=date_message)
 
@@ -215,17 +209,18 @@ class Device(serial.SerialDevice, driver_base.GlucometerDriver):
 
     def _get_reading(self, record_id):
         _, reading_date_message = self._send_command(
-            _GET_READING_DATETIME,
-            _select_record(record_id))
+            _GET_READING_DATETIME, _select_record(record_id)
+        )
         reading_date = _parse_datetime(reading_date_message)
 
         _, reading_value_message = self._send_command(
-            _GET_READING_VALUE,
-            _select_record(record_id))
+            _GET_READING_VALUE, _select_record(record_id)
+        )
         reading_value = _READING_VALUE_STRUCT.parse(reading_value_message)
 
         return common.GlucoseReading(
-            reading_date, reading_value.value, meal=reading_value.meal)
+            reading_date, reading_value.value, meal=reading_value.meal
+        )
 
     def get_readings(self):
         record_count = self._get_reading_count()
-- 
cgit v1.2.3