From 89111286d399f75452d2e10daacd800b03bc02c4 Mon Sep 17 00:00:00 2001 From: krakenrf <78108016+krakenrf@users.noreply.github.com> Date: Sun, 29 May 2022 22:41:42 +1200 Subject: Updated 2. Direction Finding Quickstart Guide (markdown) --- 2.-Direction-Finding-Quickstart-Guide.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/2.-Direction-Finding-Quickstart-Guide.md b/2.-Direction-Finding-Quickstart-Guide.md index 4120414..38d537e 100644 --- a/2.-Direction-Finding-Quickstart-Guide.md +++ b/2.-Direction-Finding-Quickstart-Guide.md @@ -21,10 +21,10 @@ For both templates print the center pentagon and five arms separately, then glue **Each hole is spaced at 50mm radius intervals.** So you have radius spacings of 100mm, 150mm, 200mm, and 250mm. These spacings cover the following frequency range: -100mm : 510 - 1275 MHz -150mm : 340 - 850 MHz -200mm : 255 - 637 MHz -250mm : 204 - 510 MHz +* 100mm : 510 - 1275 MHz +* 150mm : 340 - 850 MHz +* 200mm : 255 - 637 MHz +* 250mm : 204 - 510 MHz ## Mount the antennas The image below explains how the antennas should be mounted. Make sure the array is as straight as possible. ANT-0 must connect to CH-0 on the KrakenSDR. ANT-1 must connect to CH-1 and so on. -- cgit v1.2.3