1 files changed, 22 insertions, 9 deletions

diff --git a/Win32/README.txt b/Win32/README.txt
index ee4063a..6480258 100644
--- a/Win32/README.txt
+++ b/Win32/README.txt
@@ -1,4 +1,4 @@
-Heimdall (c) 2010-2011 Benjamin Dobell, Glass Echidna

+Heimdall (c) 2010-2013 Benjamin Dobell, Glass Echidna

 http://www.glassechidna.com.au/products/heimdall/

 

 DISCLAIMER:

@@ -32,7 +32,7 @@ Troubleshooting:
 

 Driver Installation Instructions:

 

-    1. Put your Samsung Galaxy S into download mode and plug it in.

+    1. Put your device into download mode and plug it in.

 

     2. Run zadig.exe included in the Drivers subdirectory.

 

@@ -50,7 +50,7 @@ Driver Installation Instructions:
 

 Driver Uninstallation Instructions:

 

-    1. Put your Samsung Galaxy S into download mode by holding Volume Down + Home + Power.

+    1. Put your device into download mode by holding Volume Down + Home + Power.

 

     2. Plug your phone into your PC.

 

@@ -151,7 +151,7 @@ Performing a Custom Flash with Heimdall Frontend:
 

     1. Fully charge your device (use the wall charger as it's faster).

 

-    2. Download a decrypted Samsung Galaxy S ROM or a Heimdall Firmware Package

+    2. Download a decrypted device ROM or a Heimdall Firmware Package

        and extract everything to the one directory.

 

     3. If the ROM is not a Heimdall Firmware Package it may instead be provided

@@ -236,7 +236,7 @@ Flashing Firmware from Command Line:
 	

     1. Fully charge your phone (use the wall charger as it's faster).

 

-    2. Download a decrypted Samsung Galaxy S ROM or a Heimdall Firmware Package

+    2. Download a decrypted device ROM or a Heimdall Firmware Package

        and extract everything to the one directory.

 

     3. If the ROM is not a Heimdall Firmware Package it may instead be provided

@@ -258,17 +258,30 @@ Flashing Firmware from Command Line:
 

             heimdall help

 

-    7. Use the instructions to manually enter a command with all the files you

-       want to flash.

+    7. Before flashing, you must first know the names of the partitions you

+       wish to flash. These can be obtained by executing:

+

+            heimdall print-pit --no-reboot

+

+       The inclusion of --no-reboot ensures the phone will not reboot after PIT

+       file has been downloaded and displayed. After executing a command with

+       the --no-reboot argument, the next command should include the --resume

+       argument.

+

+       NOTE: You can still safely reboot your phone manually (with the power

+             button) after executing --no-reboot commands.

+

+    8. Use the help and print-pit output to construct a command with all the

+       file you want to flash.

 

        Here is an example that does a full flash and repartition on a GT-I9000:

 		

-            heimdall flash --repartition --pit s1_odin_20100512.pit --factoryfs factoryfs.rfs --cache cache.rfs --dbdata dbdata.rfs --primary-boot boot.bin --secondary-boot Sbl.bin --param param.lfs --kernel zImage --modem modem.bin

+            heimdall flash --repartition --resume --pit s1_odin_20100512.pit --FACTORYFS factoryfs.rfs --CACHE cache.rfs --DBDATA dbdata.rfs --IBL+PBL boot.bin --SBL Sbl.bin --PARAM param.lfs --KERNEL zImage --MODEM modem.bin

 

        NOTE: The above command assumes the files specified are installed in the

              same directory as Heimdall.

 

-    8. Heimdall will display the progress as it flashes so that you know things

+    9. Heimdall will display the progress as it flashes so that you know things

        are working as they should.