summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Win32/README.txt39
-rw-r--r--cmake/FindLibusb.cmake36
-rw-r--r--cmake/Findlibusb-1.0.cmake98
-rw-r--r--heimdall/CMakeLists.txt66
-rw-r--r--libpit/CMakeLists.txt3
-rw-r--r--libusb-1.0/AUTHORS54
-rw-r--r--libusb-1.0/COPYING504
-rw-r--r--libusb-1.0/include/libusb.h1998
-rw-r--r--libusb-1.0/lib/mingw/libusb-1.0.abin499112 -> 0 bytes
9 files changed, 64 insertions, 2734 deletions
diff --git a/Win32/README.txt b/Win32/README.txt
index aec4b35..d707353 100644
--- a/Win32/README.txt
+++ b/Win32/README.txt
@@ -517,31 +517,32 @@ be included.
Appendix B - Installing Heimdall Suite from Source
- 1. Ensure that you have both a version of Visual Studio 2012 with C++
- support and Qt Developer Framework (4.7 or later, but prior to 5.0)
- installed on your system.
+ Heimdall and Heimdall Frontend both utilise the CMake for managing the build
+ process. CMake can generate files for various build systems including GNU
+ Make and Visual Studio. However, official packages are compiled with GNU
+ Make and MinGW-W64 Clang.
- A free version (Visual C++ 2012 Express) can be downloaded from
- Microsoft's website:
+ NOTE: Official builds use MinGW-W64 simply because on-going cross-platform
+ development is simpler when using just the one IDE (Jetbrain's CLion)
+ and compiler (Clang) on all platforms.
- http://www.microsoft.com/visualstudio/eng/products/visual-studio-express-products
+ 1. Setup a MinGW-W64 build environment by utilising MSYS2:
- Qt can also be downloaded freely from:
+ http://msys2.github.io/
- http://qt-project.org/downloads
+ 2. After installing MSYS2 a command prompt will launch, enter:
- 2. Open msvc2012.sln
+ Pacman -Syu
+ Pacman -S mingw-w64-x86_64 mingw-w64-x86_64-clang mingw-w64-x86_64-cmake mingw-w64-x86_64-make
- 3. From the Solutions Configuration drop-down change from "Debug" to
- "Release".
+ 3. Add the MinGW-W64 binaries to your PATH environment variable:
- 4. In the Solution Explorer right-click on the heimdall-frontend project
- and chose "Build".
+ export PATH="/mingw64/bin:$PATH"
- 5. Depending on how you've installed Qt on your system you may need to copy
- "QtCore4.dll, "QtGui4.dll" and "QtXml4.dll" from your Qt bin/
- sub-directory to Heimdall's Win32/Release sub-directory.
-
- 6. Heimdall Frontend can then be run from Win32/Release or command line can
- be used to run Heimdall (command line) from the same directory.
+ 4. Build Heimdall & Heimdall Frontend
+ mkdir build
+ cd build
+ export cxx=clang++
+ cmake -G "MSYS Makefiles" -DCMAKE_BUILD_TYPE=Release ..
+ make
diff --git a/cmake/FindLibusb.cmake b/cmake/FindLibusb.cmake
new file mode 100644
index 0000000..4b099d3
--- /dev/null
+++ b/cmake/FindLibusb.cmake
@@ -0,0 +1,36 @@
+find_path(LIBUSB_INCLUDE_DIR
+ NAMES
+ libusb.h
+ PATHS
+ /usr/local/include
+ /opt/local/include
+ /usr/include
+ PATH_SUFFIXES
+ libusb-1.0
+)
+
+if (libusb_USE_STATIC_LIBS AND NOT MSVC)
+ set (LIBUSB_LIB_PREFIX "lib" CACHE INTERNAL "libusb library name prefox passed to find_library")
+ set (LIBUSB_LIB_SUFFIX ".a" CACHE INTERNAL "libusb library name suffix passed to find_library")
+else (libusb_USE_STATIC_LIBS AND NOT MSVC)
+ set (LIBUSB_LIB_PREFIX "" CACHE INTERNAL "libusb library name prefox passed to find_library")
+ set (LIBUSB_LIB_SUFFIX "" CACHE INTERNAL "libusb library name suffix passed to find_library")
+endif (libusb_USE_STATIC_LIBS AND NOT MSVC)
+
+find_library(LIBUSB_LIBRARY
+ NAMES
+ ${LIBUSB_LIB_PREFIX}usb-1.0${LIBUSB_LIB_SUFFIX} ${LIBUSB_LIB_PREFIX}usb${LIBUSB_LIB_SUFFIX}
+ PATHS
+ /usr/local/lib
+ /opt/local/lib
+ /usr/lib
+)
+
+include(FindPackageHandleStandardArgs)
+find_package_handle_standard_args(LIBUSB REQUIRED_VARS LIBUSB_LIBRARY LIBUSB_INCLUDE_DIR)
+
+if (LIBUSB_FOUND)
+ set(LIBUSB_INCLUDE_DIRS ${LIBUSB_INCLUDE_DIR})
+ set(LIBUSB_LIBRARIES ${LIBUSB_LIBRARY})
+ mark_as_advanced(LIBUSB_INCLUDE_DIR LIBUSB_LIBRARY)
+endif (LIBUSB_FOUND)
diff --git a/cmake/Findlibusb-1.0.cmake b/cmake/Findlibusb-1.0.cmake
deleted file mode 100644
index bc63763..0000000
--- a/cmake/Findlibusb-1.0.cmake
+++ /dev/null
@@ -1,98 +0,0 @@
-# - Try to find libusb-1.0
-# Once done this will define
-#
-# LIBUSB_1_FOUND - system has libusb
-# LIBUSB_1_INCLUDE_DIRS - the libusb include directory
-# LIBUSB_1_LIBRARIES - Link these to use libusb
-# LIBUSB_1_DEFINITIONS - Compiler switches required for using libusb
-#
-# Adapted from cmake-modules Google Code project
-#
-# Copyright (c) 2006 Andreas Schneider <mail@cynapses.org>
-#
-# (Changes for libusb) Copyright (c) 2008 Kyle Machulis <kyle@nonpolynomial.com>
-#
-# Redistribution and use is allowed according to the terms of the New BSD license.
-#
-# CMake-Modules Project New BSD License
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-# * Redistributions of source code must retain the above copyright notice, this
-# list of conditions and the following disclaimer.
-#
-# * Redistributions in binary form must reproduce the above copyright notice,
-# this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-#
-# * Neither the name of the CMake-Modules Project nor the names of its
-# contributors may be used to endorse or promote products derived from this
-# software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-
-if (LIBUSB_1_LIBRARIES AND LIBUSB_1_INCLUDE_DIRS)
- # in cache already
- set(LIBUSB_FOUND TRUE)
-else (LIBUSB_1_LIBRARIES AND LIBUSB_1_INCLUDE_DIRS)
- find_path(LIBUSB_1_INCLUDE_DIR
- NAMES
- libusb.h
- PATHS
- /usr/include
- /usr/local/include
- /opt/local/include
- /sw/include
- PATH_SUFFIXES
- libusb-1.0
- )
-
- find_library(LIBUSB_1_LIBRARY
- NAMES
- usb-1.0 usb
- PATHS
- /usr/lib
- /usr/local/lib
- /opt/local/lib
- /sw/lib
- )
-
- set(LIBUSB_1_INCLUDE_DIRS
- ${LIBUSB_1_INCLUDE_DIR}
- )
- set(LIBUSB_1_LIBRARIES
- ${LIBUSB_1_LIBRARY}
-)
-
- if (LIBUSB_1_INCLUDE_DIRS AND LIBUSB_1_LIBRARIES)
- set(LIBUSB_1_FOUND TRUE)
- endif (LIBUSB_1_INCLUDE_DIRS AND LIBUSB_1_LIBRARIES)
-
- if (LIBUSB_1_FOUND)
- if (NOT libusb_1_FIND_QUIETLY)
- message(STATUS "Found libusb-1.0:")
- message(STATUS " - Includes: ${LIBUSB_1_INCLUDE_DIRS}")
- message(STATUS " - Libraries: ${LIBUSB_1_LIBRARIES}")
- endif (NOT libusb_1_FIND_QUIETLY)
- else (LIBUSB_1_FOUND)
- if (libusb_1_FIND_REQUIRED)
- message(FATAL_ERROR "Could not find libusb")
- endif (libusb_1_FIND_REQUIRED)
- endif (LIBUSB_1_FOUND)
-
- # show the LIBUSB_1_INCLUDE_DIRS and LIBUSB_1_LIBRARIES variables only in the advanced view
- mark_as_advanced(LIBUSB_1_INCLUDE_DIRS LIBUSB_1_LIBRARIES)
-
-endif (LIBUSB_1_LIBRARIES AND LIBUSB_1_INCLUDE_DIRS) \ No newline at end of file
diff --git a/heimdall/CMakeLists.txt b/heimdall/CMakeLists.txt
index bbb72d3..4e87afd 100644
--- a/heimdall/CMakeLists.txt
+++ b/heimdall/CMakeLists.txt
@@ -2,89 +2,37 @@ cmake_minimum_required(VERSION 2.8.4)
project(heimdall)
-if(WIN32)
- set(LIBUSB_1_INCLUDE_DIRS
- ../libusb-1.0/include)
-else(WIN32)
- find_package(libusb-1.0 REQUIRED)
-endif(WIN32)
+set(libusb_USE_STATIC_LIBS YES)
+find_package(libusb REQUIRED)
set(LIBPIT_INCLUDE_DIRS
../libpit/Source)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
+set(CMAKE_EXE_LINKER_FLAGS "-static-libgcc -static-libstdc++ -static")
-include_directories(SYSTEM ${LIBUSB_1_INCLUDE_DIRS})
+include_directories(SYSTEM ${LIBUSB_INCLUDE_DIRS})
include_directories(${LIBPIT_INCLUDE_DIRS})
set(HEIMDALL_SOURCE_FILES
source/Arguments.cpp
- source/Arguments.h
- source/BeginDumpPacket.h
- source/BeginSessionPacket.h
source/BridgeManager.cpp
- source/BridgeManager.h
source/ClosePcScreenAction.cpp
- source/ClosePcScreenAction.h
- source/ControlPacket.h
source/DetectAction.cpp
- source/DetectAction.h
- source/DeviceTypePacket.h
source/DownloadPitAction.cpp
- source/DownloadPitAction.h
- source/DumpPartFileTransferPacket.h
- source/DumpPartPitFilePacket.h
- source/DumpResponse.h
- source/EndFileTransferPacket.h
- source/EndModemFileTransferPacket.h
- source/EndPhoneFileTransferPacket.h
- source/EndPitFileTransferPacket.h
- source/EndSessionPacket.h
- source/FilePartSizePacket.h
- source/FileTransferPacket.h
source/FlashAction.cpp
- source/FlashAction.h
- source/FlashPartFileTransferPacket.h
- source/FlashPartPitFilePacket.h
- source/Heimdall.h
source/HelpAction.cpp
- source/HelpAction.h
- source/InboundPacket.h
source/InfoAction.cpp
- source/InfoAction.h
source/Interface.cpp
- source/Interface.h
source/main.cpp
- source/OutboundPacket.h
- source/Packet.h
- source/PitFilePacket.h
- source/PitFileResponse.h
source/PrintPitAction.cpp
- source/PrintPitAction.h
- source/ReceiveFilePartPacket.h
- source/ResponsePacket.h
- source/SendFilePartPacket.h
- source/SendFilePartResponse.h
- source/SessionSetupPacket.h
- source/SessionSetupResponse.h
- source/SetupSessionPacket.h
- source/SetupSessionResponse.h
- source/TotalBytesPacket.h
source/Utility.cpp
- source/Utility.h
- source/VersionAction.cpp
- source/VersionAction.h)
+ source/VersionAction.cpp)
include(LargeFiles)
-use_large_files(heimdall false)
+use_large_files(heimdall YES)
add_executable(heimdall ${HEIMDALL_SOURCE_FILES})
target_link_libraries(heimdall PRIVATE pit)
-
-LINK_DIRECTORIES(../libusb-1.0/lib/mingw)
-if(WIN32)
- target_link_libraries(heimdall PRIVATE ${CMAKE_SOURCE_DIR}/libusb-1.0/lib/mingw/libusb-1.0.a)
-else(WIN32)
- target_link_libraries(heimdall PRIVATE usb-1.0)
-endif(WIN32)
+target_link_libraries(heimdall PRIVATE usb-1.0)
diff --git a/libpit/CMakeLists.txt b/libpit/CMakeLists.txt
index 8d12868..f435580 100644
--- a/libpit/CMakeLists.txt
+++ b/libpit/CMakeLists.txt
@@ -4,7 +4,6 @@ project(libpit)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=gnu++11")
set(LIBPIT_SOURCE_FILES
- Source/libpit.cpp
- Source/libpit.h)
+ Source/libpit.cpp)
add_library(pit STATIC ${LIBPIT_SOURCE_FILES})
diff --git a/libusb-1.0/AUTHORS b/libusb-1.0/AUTHORS
deleted file mode 100644
index c0c1e00..0000000
--- a/libusb-1.0/AUTHORS
+++ /dev/null
@@ -1,54 +0,0 @@
-
-<!-- saved from url=(0053)https://raw.github.com/libusbx/libusbx/master/AUTHORS -->
-<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></head><body><pre style="word-wrap: break-word; white-space: pre-wrap;">Copyright © 2001 Johannes Erdfelt &lt;johannes@erdfelt.com&gt;
-Copyright © 2007-2009 Daniel Drake &lt;dsd@gentoo.org&gt;
-Copyright © 2010-2012 Peter Stuge &lt;peter@stuge.se&gt;
-Copyright © 2008-2011 Nathan Hjelm &lt;hjelmn@users.sourceforge.net&gt;
-Copyright © 2009-2012 Pete Batard &lt;pete@akeo.ie&gt;
-Copyright © 2009-2012 Ludovic Rousseau &lt;ludovic.rousseau@gmail.com&gt;
-Copyright © 2010-2012 Michael Plante &lt;michael.plante@gmail.com&gt;
-Copyright © 2011-2012 Hans de Goede &lt;hdegoede@redhat.com&gt;
-Copyright © 2012 Martin Pieuchot &lt;mpi@openbsd.org&gt;
-
-Other contributors:
-Alan Ott
-Alan Stern
-Alex Vatchenko
-Anthony Clay
-Artem Egorkine
-Aurelien Jarno
-Bastien Nocera
-Dave Camarillo
-David Engraf
-David Moore
-Davidlohr Bueso
-Felipe Balbi
-Francesco Montorsi
-Graeme Gill
-Hans Ulrich Niedermann
-Hector Martin
-Hoi-Ho Chan
-James Hanko
-Konrad Rzepecki
-Lars Wirzenius
-Martin Koegler
-Matthias Bolte
-Mike Frysinger
-Mikhail Gusarov
-Nicholas Corgan
-Orin Eman
-Pekka Nikander
-Rob Walker
-Sean McBride
-Sebastian Pipping
-Simon Haggett
-Thomas Röfer
-Toby Gray
-Toby Peterson
-Trygve Laugstøl
-Uri Lublin
-Vasily Khoruzhick
-Vitali Lovich
-Xiaofan Chen
-Роман Донченко
-</pre></body></html> \ No newline at end of file
diff --git a/libusb-1.0/COPYING b/libusb-1.0/COPYING
deleted file mode 100644
index 5ab7695..0000000
--- a/libusb-1.0/COPYING
+++ /dev/null
@@ -1,504 +0,0 @@
- GNU LESSER GENERAL PUBLIC LICENSE
- Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL. It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
- This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it. You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
- When we speak of free software, we are referring to freedom of use,
-not price. Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
- To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights. These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
- For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you. You must make sure that they, too, receive or can get the source
-code. If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it. And you must show them these terms so they know their rights.
-
- We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
- To protect each distributor, we want to make it very clear that
-there is no warranty for the free library. Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
- Finally, software patents pose a constant threat to the existence of
-any free program. We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder. Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
- Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License. This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License. We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
- When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library. The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom. The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
- We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License. It also provides other free software developers Less
-of an advantage over competing non-free programs. These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries. However, the Lesser license provides advantages in certain
-special circumstances.
-
- For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard. To achieve this, non-free programs must be
-allowed to use the library. A more frequent case is that a free
-library does the same job as widely used non-free libraries. In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
- In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software. For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
- Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
- The precise terms and conditions for copying, distribution and
-modification follow. Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library". The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
- GNU LESSER GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
- A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
- The "Library", below, refers to any such software library or work
-which has been distributed under these terms. A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language. (Hereinafter, translation is
-included without limitation in the term "modification".)
-
- "Source code" for a work means the preferred form of the work for
-making modifications to it. For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
- Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it). Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-
- 1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
- You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
- 2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) The modified work must itself be a software library.
-
- b) You must cause the files modified to carry prominent notices
- stating that you changed the files and the date of any change.
-
- c) You must cause the whole of the work to be licensed at no
- charge to all third parties under the terms of this License.
-
- d) If a facility in the modified Library refers to a function or a
- table of data to be supplied by an application program that uses
- the facility, other than as an argument passed when the facility
- is invoked, then you must make a good faith effort to ensure that,
- in the event an application does not supply such function or
- table, the facility still operates, and performs whatever part of
- its purpose remains meaningful.
-
- (For example, a function in a library to compute square roots has
- a purpose that is entirely well-defined independent of the
- application. Therefore, Subsection 2d requires that any
- application-supplied function or table used by this function must
- be optional: if the application does not supply it, the square
- root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library. To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License. (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.) Do not make any other change in
-these notices.
-
- Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
- This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
- 4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
- If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library". Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
- However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library". The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
- When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library. The
-threshold for this to be true is not precisely defined by law.
-
- If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work. (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
- Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
- 6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
- You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License. You must supply a copy of this License. If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License. Also, you must do one
-of these things:
-
- a) Accompany the work with the complete corresponding
- machine-readable source code for the Library including whatever
- changes were used in the work (which must be distributed under
- Sections 1 and 2 above); and, if the work is an executable linked
- with the Library, with the complete machine-readable "work that
- uses the Library", as object code and/or source code, so that the
- user can modify the Library and then relink to produce a modified
- executable containing the modified Library. (It is understood
- that the user who changes the contents of definitions files in the
- Library will not necessarily be able to recompile the application
- to use the modified definitions.)
-
- b) Use a suitable shared library mechanism for linking with the
- Library. A suitable mechanism is one that (1) uses at run time a
- copy of the library already present on the user's computer system,
- rather than copying library functions into the executable, and (2)
- will operate properly with a modified version of the library, if
- the user installs one, as long as the modified version is
- interface-compatible with the version that the work was made with.
-
- c) Accompany the work with a written offer, valid for at
- least three years, to give the same user the materials
- specified in Subsection 6a, above, for a charge no more
- than the cost of performing this distribution.
-
- d) If distribution of the work is made by offering access to copy
- from a designated place, offer equivalent access to copy the above
- specified materials from the same place.
-
- e) Verify that the user has already received a copy of these
- materials or that you have already sent this user a copy.
-
- For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it. However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
- It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system. Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
- 7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
- a) Accompany the combined library with a copy of the same work
- based on the Library, uncombined with any other library
- facilities. This must be distributed under the terms of the
- Sections above.
-
- b) Give prominent notice with the combined library of the fact
- that part of it is a work based on the Library, and explaining
- where to find the accompanying uncombined form of the same work.
-
- 8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License. Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License. However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
- 9. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Library or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
- 10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
- 11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all. For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded. In such case, this License incorporates the limitation as if
-written in the body of this License.
-
- 13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation. If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
- 14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission. For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this. Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
- NO WARRANTY
-
- 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
- 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Libraries
-
- If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change. You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of the
-ordinary General Public License).
-
- To apply these terms, attach the following notices to the library. It is
-safest to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-
- <one line to give the library's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with this library; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-
-Also add information on how to contact you by electronic and paper mail.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the library, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the
- library `Frob' (a library for tweaking knobs) written by James Random Hacker.
-
- <signature of Ty Coon>, 1 April 1990
- Ty Coon, President of Vice
-
-That's all there is to it!
-
-
diff --git a/libusb-1.0/include/libusb.h b/libusb-1.0/include/libusb.h
deleted file mode 100644
index a19ab34..0000000
--- a/libusb-1.0/include/libusb.h
+++ /dev/null
@@ -1,1998 +0,0 @@
-/*
- * Public libusb header file
- * Copyright © 2001 Johannes Erdfelt <johannes@erdfelt.com>
- * Copyright © 2007-2008 Daniel Drake <dsd@gentoo.org>
- * Copyright © 2012 Pete Batard <pete@akeo.ie>
- * Copyright © 2012 Nathan Hjelm <hjelmn@cs.unm.edu>
- * For more information, please visit: http://libusb.info
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef LIBUSB_H
-#define LIBUSB_H
-
-#ifdef _MSC_VER
-/* on MS environments, the inline keyword is available in C++ only */
-#if !defined(__cplusplus)
-#define inline __inline
-#endif
-/* ssize_t is also not available (copy/paste from MinGW) */
-#ifndef _SSIZE_T_DEFINED
-#define _SSIZE_T_DEFINED
-#undef ssize_t
-#ifdef _WIN64
- typedef __int64 ssize_t;
-#else
- typedef int ssize_t;
-#endif /* _WIN64 */
-#endif /* _SSIZE_T_DEFINED */
-#endif /* _MSC_VER */
-
-/* stdint.h is not available on older MSVC */
-#if defined(_MSC_VER) && (_MSC_VER < 1600) && (!defined(_STDINT)) && (!defined(_STDINT_H))
-typedef unsigned __int8 uint8_t;
-typedef unsigned __int16 uint16_t;
-typedef unsigned __int32 uint32_t;
-#else
-#include <stdint.h>
-#endif
-
-#if !defined(_WIN32_WCE)
-#include <sys/types.h>
-#endif
-
-#if defined(__linux) || defined(__APPLE__) || defined(__CYGWIN__)
-#include <sys/time.h>
-#endif
-
-#include <time.h>
-#include <limits.h>
-
-/* 'interface' might be defined as a macro on Windows, so we need to
- * undefine it so as not to break the current libusb API, because
- * libusb_config_descriptor has an 'interface' member
- * As this can be problematic if you include windows.h after libusb.h
- * in your sources, we force windows.h to be included first. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-#include <windows.h>
-#if defined(interface)
-#undef interface
-#endif
-#if !defined(__CYGWIN__)
-#include <winsock.h>
-#endif
-#endif
-
-#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
-#define LIBUSB_DEPRECATED_FOR(f) \
- __attribute__((deprecated("Use " #f " instead")))
-#else
-#define LIBUSB_DEPRECATED_FOR(f)
-#endif /* __GNUC__ */
-
-/** \def LIBUSB_CALL
- * \ingroup misc
- * libusb's Windows calling convention.
- *
- * Under Windows, the selection of available compilers and configurations
- * means that, unlike other platforms, there is not <em>one true calling
- * convention</em> (calling convention: the manner in which parameters are
- * passed to funcions in the generated assembly code).
- *
- * Matching the Windows API itself, libusb uses the WINAPI convention (which
- * translates to the <tt>stdcall</tt> convention) and guarantees that the
- * library is compiled in this way. The public header file also includes
- * appropriate annotations so that your own software will use the right
- * convention, even if another convention is being used by default within
- * your codebase.
- *
- * The one consideration that you must apply in your software is to mark
- * all functions which you use as libusb callbacks with this LIBUSB_CALL
- * annotation, so that they too get compiled for the correct calling
- * convention.
- *
- * On non-Windows operating systems, this macro is defined as nothing. This
- * means that you can apply it to your code without worrying about
- * cross-platform compatibility.
- */
-/* LIBUSB_CALL must be defined on both definition and declaration of libusb
- * functions. You'd think that declaration would be enough, but cygwin will
- * complain about conflicting types unless both are marked this way.
- * The placement of this macro is important too; it must appear after the
- * return type, before the function name. See internal documentation for
- * API_EXPORTED.
- */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-#define LIBUSB_CALL WINAPI
-#else
-#define LIBUSB_CALL
-#endif
-
-/** \def LIBUSB_API_VERSION
- * \ingroup misc
- * libusb's API version.
- *
- * Since version 1.0.13, to help with feature detection, libusb defines
- * a LIBUSB_API_VERSION macro that gets increased every time there is a
- * significant change to the API, such as the introduction of a new call,
- * the definition of a new macro/enum member, or any other element that
- * libusb applications may want to detect at compilation time.
- *
- * The macro is typically used in an application as follows:
- * \code
- * #if defined(LIBUSB_API_VERSION) && (LIBUSB_API_VERSION >= 0x01001234)
- * // Use one of the newer features from the libusb API
- * #endif
- * \endcode
- *
- * Another feature of LIBUSB_API_VERSION is that it can be used to detect
- * whether you are compiling against the libusb or the libusb library.
- *
- * Internally, LIBUSB_API_VERSION is defined as follows:
- * (libusb major << 24) | (libusb minor << 16) | (16 bit incremental)
- */
-#define LIBUSB_API_VERSION 0x01000103
-
-/* The following is kept for compatibility, but will be deprecated in the future */
-#define LIBUSBX_API_VERSION LIBUSB_API_VERSION
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * \ingroup misc
- * Convert a 16-bit value from host-endian to little-endian format. On
- * little endian systems, this function does nothing. On big endian systems,
- * the bytes are swapped.
- * \param x the host-endian value to convert
- * \returns the value in little-endian byte order
- */
-static inline uint16_t libusb_cpu_to_le16(const uint16_t x)
-{
- union {
- uint8_t b8[2];
- uint16_t b16;
- } _tmp;
- _tmp.b8[1] = (uint8_t) (x >> 8);
- _tmp.b8[0] = (uint8_t) (x & 0xff);
- return _tmp.b16;
-}
-
-/** \def libusb_le16_to_cpu
- * \ingroup misc
- * Convert a 16-bit value from little-endian to host-endian format. On
- * little endian systems, this function does nothing. On big endian systems,
- * the bytes are swapped.
- * \param x the little-endian value to convert
- * \returns the value in host-endian byte order
- */
-#define libusb_le16_to_cpu libusb_cpu_to_le16
-
-/* standard USB stuff */
-
-/** \ingroup desc
- * Device and/or Interface Class codes */
-enum libusb_class_code {
- /** In the context of a \ref libusb_device_descriptor "device descriptor",
- * this bDeviceClass value indicates that each interface specifies its
- * own class information and all interfaces operate independently.
- */
- LIBUSB_CLASS_PER_INTERFACE = 0,
-
- /** Audio class */
- LIBUSB_CLASS_AUDIO = 1,
-
- /** Communications class */
- LIBUSB_CLASS_COMM = 2,
-
- /** Human Interface Device class */
- LIBUSB_CLASS_HID = 3,
-
- /** Physical */
- LIBUSB_CLASS_PHYSICAL = 5,
-
- /** Printer class */
- LIBUSB_CLASS_PRINTER = 7,
-
- /** Image class */
- LIBUSB_CLASS_PTP = 6, /* legacy name from libusb-0.1 usb.h */
- LIBUSB_CLASS_IMAGE = 6,
-
- /** Mass storage class */
- LIBUSB_CLASS_MASS_STORAGE = 8,
-
- /** Hub class */
- LIBUSB_CLASS_HUB = 9,
-
- /** Data class */
- LIBUSB_CLASS_DATA = 10,
-
- /** Smart Card */
- LIBUSB_CLASS_SMART_CARD = 0x0b,
-
- /** Content Security */
- LIBUSB_CLASS_CONTENT_SECURITY = 0x0d,
-
- /** Video */
- LIBUSB_CLASS_VIDEO = 0x0e,
-
- /** Personal Healthcare */
- LIBUSB_CLASS_PERSONAL_HEALTHCARE = 0x0f,
-
- /** Diagnostic Device */
- LIBUSB_CLASS_DIAGNOSTIC_DEVICE = 0xdc,
-
- /** Wireless class */
- LIBUSB_CLASS_WIRELESS = 0xe0,
-
- /** Application class */
- LIBUSB_CLASS_APPLICATION = 0xfe,
-
- /** Class is vendor-specific */
- LIBUSB_CLASS_VENDOR_SPEC = 0xff
-};
-
-/** \ingroup desc
- * Descriptor types as defined by the USB specification. */
-enum libusb_descriptor_type {
- /** Device descriptor. See libusb_device_descriptor. */
- LIBUSB_DT_DEVICE = 0x01,
-
- /** Configuration descriptor. See libusb_config_descriptor. */
- LIBUSB_DT_CONFIG = 0x02,
-
- /** String descriptor */
- LIBUSB_DT_STRING = 0x03,
-
- /** Interface descriptor. See libusb_interface_descriptor. */
- LIBUSB_DT_INTERFACE = 0x04,
-
- /** Endpoint descriptor. See libusb_endpoint_descriptor. */
- LIBUSB_DT_ENDPOINT = 0x05,
-
- /** BOS descriptor */
- LIBUSB_DT_BOS = 0x0f,
-
- /** Device Capability descriptor */
- LIBUSB_DT_DEVICE_CAPABILITY = 0x10,
-
- /** HID descriptor */
- LIBUSB_DT_HID = 0x21,
-
- /** HID report descriptor */
- LIBUSB_DT_REPORT = 0x22,
-
- /** Physical descriptor */
- LIBUSB_DT_PHYSICAL = 0x23,
-
- /** Hub descriptor */
- LIBUSB_DT_HUB = 0x29,
-
- /** SuperSpeed Hub descriptor */
- LIBUSB_DT_SUPERSPEED_HUB = 0x2a,
-
- /** SuperSpeed Endpoint Companion descriptor */
- LIBUSB_DT_SS_ENDPOINT_COMPANION = 0x30
-};
-
-/* Descriptor sizes per descriptor type */
-#define LIBUSB_DT_DEVICE_SIZE 18
-#define LIBUSB_DT_CONFIG_SIZE 9
-#define LIBUSB_DT_INTERFACE_SIZE 9
-#define LIBUSB_DT_ENDPOINT_SIZE 7
-#define LIBUSB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
-#define LIBUSB_DT_HUB_NONVAR_SIZE 7
-#define LIBUSB_DT_SS_ENDPOINT_COMPANION_SIZE 6
-#define LIBUSB_DT_BOS_SIZE 5
-#define LIBUSB_DT_DEVICE_CAPABILITY_SIZE 3
-
-/* BOS descriptor sizes */
-#define LIBUSB_BT_USB_2_0_EXTENSION_SIZE 7
-#define LIBUSB_BT_SS_USB_DEVICE_CAPABILITY_SIZE 10
-#define LIBUSB_BT_CONTAINER_ID_SIZE 20
-
-/* We unwrap the BOS => define its max size */
-#define LIBUSB_DT_BOS_MAX_SIZE ((LIBUSB_DT_BOS_SIZE) +\
- (LIBUSB_BT_USB_2_0_EXTENSION_SIZE) +\
- (LIBUSB_BT_SS_USB_DEVICE_CAPABILITY_SIZE) +\
- (LIBUSB_BT_CONTAINER_ID_SIZE))
-
-#define LIBUSB_ENDPOINT_ADDRESS_MASK 0x0f /* in bEndpointAddress */
-#define LIBUSB_ENDPOINT_DIR_MASK 0x80
-
-/** \ingroup desc
- * Endpoint direction. Values for bit 7 of the
- * \ref libusb_endpoint_descriptor::bEndpointAddress "endpoint address" scheme.
- */
-enum libusb_endpoint_direction {
- /** In: device-to-host */
- LIBUSB_ENDPOINT_IN = 0x80,
-
- /** Out: host-to-device */
- LIBUSB_ENDPOINT_OUT = 0x00
-};
-
-#define LIBUSB_TRANSFER_TYPE_MASK 0x03 /* in bmAttributes */
-
-/** \ingroup desc
- * Endpoint transfer type. Values for bits 0:1 of the
- * \ref libusb_endpoint_descriptor::bmAttributes "endpoint attributes" field.
- */
-enum libusb_transfer_type {
- /** Control endpoint */
- LIBUSB_TRANSFER_TYPE_CONTROL = 0,
-
- /** Isochronous endpoint */
- LIBUSB_TRANSFER_TYPE_ISOCHRONOUS = 1,
-
- /** Bulk endpoint */
- LIBUSB_TRANSFER_TYPE_BULK = 2,
-
- /** Interrupt endpoint */
- LIBUSB_TRANSFER_TYPE_INTERRUPT = 3,
-
- /** Stream endpoint */
- LIBUSB_TRANSFER_TYPE_BULK_STREAM = 4,
-};
-
-/** \ingroup misc
- * Standard requests, as defined in table 9-5 of the USB 3.0 specifications */
-enum libusb_standard_request {
- /** Request status of the specific recipient */
- LIBUSB_REQUEST_GET_STATUS = 0x00,
-
- /** Clear or disable a specific feature */
- LIBUSB_REQUEST_CLEAR_FEATURE = 0x01,
-
- /* 0x02 is reserved */
-
- /** Set or enable a specific feature */
- LIBUSB_REQUEST_SET_FEATURE = 0x03,
-
- /* 0x04 is reserved */
-
- /** Set device address for all future accesses */
- LIBUSB_REQUEST_SET_ADDRESS = 0x05,
-
- /** Get the specified descriptor */
- LIBUSB_REQUEST_GET_DESCRIPTOR = 0x06,
-
- /** Used to update existing descriptors or add new descriptors */
- LIBUSB_REQUEST_SET_DESCRIPTOR = 0x07,
-
- /** Get the current device configuration value */
- LIBUSB_REQUEST_GET_CONFIGURATION = 0x08,
-
- /** Set device configuration */
- LIBUSB_REQUEST_SET_CONFIGURATION = 0x09,
-
- /** Return the selected alternate setting for the specified interface */
- LIBUSB_REQUEST_GET_INTERFACE = 0x0A,
-
- /** Select an alternate interface for the specified interface */
- LIBUSB_REQUEST_SET_INTERFACE = 0x0B,
-
- /** Set then report an endpoint's synchronization frame */
- LIBUSB_REQUEST_SYNCH_FRAME = 0x0C,
-
- /** Sets both the U1 and U2 Exit Latency */
- LIBUSB_REQUEST_SET_SEL = 0x30,
-
- /** Delay from the time a host transmits a packet to the time it is
- * received by the device. */
- LIBUSB_SET_ISOCH_DELAY = 0x31,
-};
-
-/** \ingroup misc
- * Request type bits of the
- * \ref libusb_control_setup::bmRequestType "bmRequestType" field in control
- * transfers. */
-enum libusb_request_type {
- /** Standard */
- LIBUSB_REQUEST_TYPE_STANDARD = (0x00 << 5),
-
- /** Class */
- LIBUSB_REQUEST_TYPE_CLASS = (0x01 << 5),
-
- /** Vendor */
- LIBUSB_REQUEST_TYPE_VENDOR = (0x02 << 5),
-
- /** Reserved */
- LIBUSB_REQUEST_TYPE_RESERVED = (0x03 << 5)
-};
-
-/** \ingroup misc
- * Recipient bits of the
- * \ref libusb_control_setup::bmRequestType "bmRequestType" field in control
- * transfers. Values 4 through 31 are reserved. */
-enum libusb_request_recipient {
- /** Device */
- LIBUSB_RECIPIENT_DEVICE = 0x00,
-
- /** Interface */
- LIBUSB_RECIPIENT_INTERFACE = 0x01,
-
- /** Endpoint */
- LIBUSB_RECIPIENT_ENDPOINT = 0x02,
-
- /** Other */
- LIBUSB_RECIPIENT_OTHER = 0x03,
-};
-
-#define LIBUSB_ISO_SYNC_TYPE_MASK 0x0C
-
-/** \ingroup desc
- * Synchronization type for isochronous endpoints. Values for bits 2:3 of the
- * \ref libusb_endpoint_descriptor::bmAttributes "bmAttributes" field in
- * libusb_endpoint_descriptor.
- */
-enum libusb_iso_sync_type {
- /** No synchronization */
- LIBUSB_ISO_SYNC_TYPE_NONE = 0,
-
- /** Asynchronous */
- LIBUSB_ISO_SYNC_TYPE_ASYNC = 1,
-
- /** Adaptive */
- LIBUSB_ISO_SYNC_TYPE_ADAPTIVE = 2,
-
- /** Synchronous */
- LIBUSB_ISO_SYNC_TYPE_SYNC = 3
-};
-
-#define LIBUSB_ISO_USAGE_TYPE_MASK 0x30
-
-/** \ingroup desc
- * Usage type for isochronous endpoints. Values for bits 4:5 of the
- * \ref libusb_endpoint_descriptor::bmAttributes "bmAttributes" field in
- * libusb_endpoint_descriptor.
- */
-enum libusb_iso_usage_type {
- /** Data endpoint */
- LIBUSB_ISO_USAGE_TYPE_DATA = 0,
-
- /** Feedback endpoint */
- LIBUSB_ISO_USAGE_TYPE_FEEDBACK = 1,
-
- /** Implicit feedback Data endpoint */
- LIBUSB_ISO_USAGE_TYPE_IMPLICIT = 2,
-};
-
-/** \ingroup desc
- * A structure representing the standard USB device descriptor. This
- * descriptor is documented in section 9.6.1 of the USB 3.0 specification.
- * All multiple-byte fields are represented in host-endian format.
- */
-struct libusb_device_descriptor {
- /** Size of this descriptor (in bytes) */
- uint8_t bLength;
-
- /** Descriptor type. Will have value
- * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE LIBUSB_DT_DEVICE in this
- * context. */
- uint8_t bDescriptorType;
-
- /** USB specification release number in binary-coded decimal. A value of
- * 0x0200 indicates USB 2.0, 0x0110 indicates USB 1.1, etc. */
- uint16_t bcdUSB;
-
- /** USB-IF class code for the device. See \ref libusb_class_code. */
- uint8_t bDeviceClass;
-
- /** USB-IF subclass code for the device, qualified by the bDeviceClass
- * value */
- uint8_t bDeviceSubClass;
-
- /** USB-IF protocol code for the device, qualified by the bDeviceClass and
- * bDeviceSubClass values */
- uint8_t bDeviceProtocol;
-
- /** Maximum packet size for endpoint 0 */
- uint8_t bMaxPacketSize0;
-
- /** USB-IF vendor ID */
- uint16_t idVendor;
-
- /** USB-IF product ID */
- uint16_t idProduct;
-
- /** Device release number in binary-coded decimal */
- uint16_t bcdDevice;
-
- /** Index of string descriptor describing manufacturer */
- uint8_t iManufacturer;
-
- /** Index of string descriptor describing product */
- uint8_t iProduct;
-
- /** Index of string descriptor containing device serial number */
- uint8_t iSerialNumber;
-
- /** Number of possible configurations */
- uint8_t bNumConfigurations;
-};
-
-/** \ingroup desc
- * A structure representing the standard USB endpoint descriptor. This
- * descriptor is documented in section 9.6.6 of the USB 3.0 specification.
- * All multiple-byte fields are represented in host-endian format.
- */
-struct libusb_endpoint_descriptor {
- /** Size of this descriptor (in bytes) */
- uint8_t bLength;
-
- /** Descriptor type. Will have value
- * \ref libusb_descriptor_type::LIBUSB_DT_ENDPOINT LIBUSB_DT_ENDPOINT in
- * this context. */
- uint8_t bDescriptorType;
-
- /** The address of the endpoint described by this descriptor. Bits 0:3 are
- * the endpoint number. Bits 4:6 are reserved. Bit 7 indicates direction,
- * see \ref libusb_endpoint_direction.
- */
- uint8_t bEndpointAddress;
-
- /** Attributes which apply to the endpoint when it is configured using
- * the bConfigurationValue. Bits 0:1 determine the transfer type and
- * correspond to \ref libusb_transfer_type. Bits 2:3 are only used for
- * isochronous endpoints and correspond to \ref libusb_iso_sync_type.
- * Bits 4:5 are also only used for isochronous endpoints and correspond to
- * \ref libusb_iso_usage_type. Bits 6:7 are reserved.
- */
- uint8_t bmAttributes;
-
- /** Maximum packet size this endpoint is capable of sending/receiving. */
- uint16_t wMaxPacketSize;
-
- /** Interval for polling endpoint for data transfers. */
- uint8_t bInterval;
-
- /** For audio devices only: the rate at which synchronization feedback
- * is provided. */
- uint8_t bRefresh;
-
- /** For audio devices only: the address if the synch endpoint */
- uint8_t bSynchAddress;
-
- /** Extra descriptors. If libusb encounters unknown endpoint descriptors,
- * it will store them here, should you wish to parse them. */
- const unsigned char *extra;
-
- /** Length of the extra descriptors, in bytes. */
- int extra_length;
-};
-
-/** \ingroup desc
- * A structure representing the standard USB interface descriptor. This
- * descriptor is documented in section 9.6.5 of the USB 3.0 specification.
- * All multiple-byte fields are represented in host-endian format.
- */
-struct libusb_interface_descriptor {
- /** Size of this descriptor (in bytes) */
- uint8_t bLength;
-
- /** Descriptor type. Will have value
- * \ref libusb_descriptor_type::LIBUSB_DT_INTERFACE LIBUSB_DT_INTERFACE
- * in this context. */
- uint8_t bDescriptorType;
-
- /** Number of this interface */
- uint8_t bInterfaceNumber;
-
- /** Value used to select this alternate setting for this interface */
- uint8_t bAlternateSetting;
-
- /** Number of endpoints used by this interface (excluding the control
- * endpoint). */
- uint8_t bNumEndpoints;
-
- /** USB-IF class code for this interface. See \ref libusb_class_code. */
- uint8_t bInterfaceClass;
-
- /** USB-IF subclass code for this interface, qualified by the
- * bInterfaceClass value */
- uint8_t bInterfaceSubClass;
-
- /** USB-IF protocol code for this interface, qualified by the
- * bInterfaceClass and bInterfaceSubClass values */
- uint8_t bInterfaceProtocol;
-
- /** Index of string descriptor describing this interface */
- uint8_t iInterface;
-
- /** Array of endpoint descriptors. This length of this array is determined
- * by the bNumEndpoints field. */
- const struct libusb_endpoint_descriptor *endpoint;
-
- /** Extra descriptors. If libusb encounters unknown interface descriptors,
- * it will store them here, should you wish to parse them. */
- const unsigned char *extra;
-
- /** Length of the extra descriptors, in bytes. */
- int extra_length;
-};
-
-/** \ingroup desc
- * A collection of alternate settings for a particular USB interface.
- */
-struct libusb_interface {
- /** Array of interface descriptors. The length of this array is determined
- * by the num_altsetting field. */
- const struct libusb_interface_descriptor *altsetting;
-
- /** The number of alternate settings that belong to this interface */
- int num_altsetting;
-};
-
-/** \ingroup desc
- * A structure representing the standard USB configuration descriptor. This
- * descriptor is documented in section 9.6.3 of the USB 3.0 specification.
- * All multiple-byte fields are represented in host-endian format.
- */
-struct libusb_config_descriptor {
- /** Size of this descriptor (in bytes) */
- uint8_t bLength;
-
- /** Descriptor type. Will have value
- * \ref libusb_descriptor_type::LIBUSB_DT_CONFIG LIBUSB_DT_CONFIG
- * in this context. */
- uint8_t bDescriptorType;
-
- /** Total length of data returned for this configuration */
- uint16_t wTotalLength;
-
- /** Number of interfaces supported by this configuration */
- uint8_t bNumInterfaces;
-
- /** Identifier value for this configuration */
- uint8_t bConfigurationValue;
-
- /** Index of string descriptor describing this configuration */
- uint8_t iConfiguration;
-
- /** Configuration characteristics */
- uint8_t bmAttributes;
-
- /** Maximum power consumption of the USB device from this bus in this
- * configuration when the device is fully opreation. Expressed in units
- * of 2 mA. */
- uint8_t MaxPower;
-
- /** Array of interfaces supported by this configuration. The length of
- * this array is determined by the bNumInterfaces field. */
- const struct libusb_interface *interface;
-
- /** Extra descriptors. If libusb encounters unknown configuration
- * descriptors, it will store them here, should you wish to parse them. */
- const unsigned char *extra;
-
- /** Length of the extra descriptors, in bytes. */
- int extra_length;
-};
-
-/** \ingroup desc
- * A structure representing the superspeed endpoint companion
- * descriptor. This descriptor is documented in section 9.6.7 of
- * the USB 3.0 specification. All multiple-byte fields are represented in
- * host-endian format.
- */
-struct libusb_ss_endpoint_companion_descriptor {
-
- /** Size of this descriptor (in bytes) */
- uint8_t bLength;
-
- /** Descriptor type. Will have value
- * \ref libusb_descriptor_type::LIBUSB_DT_SS_ENDPOINT_COMPANION in
- * this context. */
- uint8_t bDescriptorType;
-
-
- /** The maximum number of packets the endpoint can send or
- * recieve as part of a burst. */
- uint8_t bMaxBurst;
-
- /** In bulk EP: bits 4:0 represents the maximum number of
- * streams the EP supports. In isochronous EP: bits 1:0
- * represents the Mult - a zero based value that determines
- * the maximum number of packets within a service interval */
- uint8_t bmAttributes;
-
- /** The total number of bytes this EP will transfer every
- * service interval. valid only for periodic EPs. */
- uint16_t wBytesPerInterval;
-};
-
-/** \ingroup desc
- * A generic representation of a BOS Device Capability descriptor. It is
- * advised to check bDevCapabilityType and call the matching
- * libusb_get_*_descriptor function to get a structure fully matching the type.
- */
-struct libusb_bos_dev_capability_descriptor {
- /** Size of this descriptor (in bytes) */
- uint8_t bLength;
- /** Descriptor type. Will have value
- * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY
- * LIBUSB_DT_DEVICE_CAPABILITY in this context. */
- uint8_t bDescriptorType;
- /** Device Capability type */
- uint8_t bDevCapabilityType;
- /** Device Capability data (bLength - 3 bytes) */
- uint8_t dev_capability_data
-#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)
- [] /* valid C99 code */
-#else
- [0] /* non-standard, but usually working code */
-#endif
- ;
-};
-
-/** \ingroup desc
- * A structure representing the Binary Device Object Store (BOS) descriptor.
- * This descriptor is documented in section 9.6.2 of the USB 3.0 specification.
- * All multiple-byte fields are represented in host-endian format.
- */
-struct libusb_bos_descriptor {
- /** Size of this descriptor (in bytes) */
- uint8_t bLength;
-
- /** Descriptor type. Will have value
- * \ref libusb_descriptor_type::LIBUSB_DT_BOS LIBUSB_DT_BOS
- * in this context. */
- uint8_t bDescriptorType;
-
- /** Length of this descriptor and all of its sub descriptors */
- uint16_t wTotalLength;
-
- /** The number of separate device capability descriptors in
- * the BOS */
- uint8_t bNumDeviceCaps;
-
- /** bNumDeviceCap Device Capability Descriptors */
- struct libusb_bos_dev_capability_descriptor *dev_capability
-#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)
- [] /* valid C99 code */
-#else
- [0] /* non-standard, but usually working code */
-#endif
- ;
-};
-
-/** \ingroup desc
- * A structure representing the USB 2.0 Extension descriptor
- * This descriptor is documented in section 9.6.2.1 of the USB 3.0 specification.
- * All multiple-byte fields are represented in host-endian format.
- */
-struct libusb_usb_2_0_extension_descriptor {
- /** Size of this descriptor (in bytes) */
- uint8_t bLength;
-
- /** Descriptor type. Will have value
- * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY
- * LIBUSB_DT_DEVICE_CAPABILITY in this context. */
- uint8_t bDescriptorType;
-
- /** Capability type. Will have value
- * \ref libusb_capability_type::LIBUSB_BT_USB_2_0_EXTENSION
- * LIBUSB_BT_USB_2_0_EXTENSION in this context. */
- uint8_t bDevCapabilityType;
-
- /** Bitmap encoding of supported device level features.
- * A value of one in a bit location indicates a feature is
- * supported; a value of zero indicates it is not supported.
- * See \ref libusb_usb_2_0_extension_attributes. */
- uint32_t bmAttributes;
-};
-
-/** \ingroup desc
- * A structure representing the SuperSpeed USB Device Capability descriptor
- * This descriptor is documented in section 9.6.2.2 of the USB 3.0 specification.
- * All multiple-byte fields are represented in host-endian format.
- */
-struct libusb_ss_usb_device_capability_descriptor {
- /** Size of this descriptor (in bytes) */
- uint8_t bLength;
-
- /** Descriptor type. Will have value
- * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY
- * LIBUSB_DT_DEVICE_CAPABILITY in this context. */
- uint8_t bDescriptorType;
-
- /** Capability type. Will have value
- * \ref libusb_capability_type::LIBUSB_BT_SS_USB_DEVICE_CAPABILITY
- * LIBUSB_BT_SS_USB_DEVICE_CAPABILITY in this context. */
- uint8_t bDevCapabilityType;
-
- /** Bitmap encoding of supported device level features.
- * A value of one in a bit location indicates a feature is
- * supported; a value of zero indicates it is not supported.
- * See \ref libusb_ss_usb_device_capability_attributes. */
- uint8_t bmAttributes;
-
- /** Bitmap encoding of the speed supported by this device when
- * operating in SuperSpeed mode. See \ref libusb_supported_speed. */
- uint16_t wSpeedSupported;
-
- /** The lowest speed at which all the functionality supported
- * by the device is available to the user. For example if the
- * device supports all its functionality when connected at
- * full speed and above then it sets this value to 1. */
- uint8_t bFunctionalitySupport;
-
- /** U1 Device Exit Latency. */
- uint8_t bU1DevExitLat;
-
- /** U2 Device Exit Latency. */
- uint16_t bU2DevExitLat;
-};
-
-/** \ingroup desc
- * A structure representing the Container ID descriptor.
- * This descriptor is documented in section 9.6.2.3 of the USB 3.0 specification.
- * All multiple-byte fields, except UUIDs, are represented in host-endian format.
- */
-struct libusb_container_id_descriptor {
- /** Size of this descriptor (in bytes) */
- uint8_t bLength;
-
- /** Descriptor type. Will have value
- * \ref libusb_descriptor_type::LIBUSB_DT_DEVICE_CAPABILITY
- * LIBUSB_DT_DEVICE_CAPABILITY in this context. */
- uint8_t bDescriptorType;
-
- /** Capability type. Will have value
- * \ref libusb_capability_type::LIBUSB_BT_CONTAINER_ID
- * LIBUSB_BT_CONTAINER_ID in this context. */
- uint8_t bDevCapabilityType;
-
- /** Reserved field */
- uint8_t bReserved;
-
- /** 128 bit UUID */
- uint8_t ContainerID[16];
-};
-
-/** \ingroup asyncio
- * Setup packet for control transfers. */
-struct libusb_control_setup {
- /** Request type. Bits 0:4 determine recipient, see
- * \ref libusb_request_recipient. Bits 5:6 determine type, see
- * \ref libusb_request_type. Bit 7 determines data transfer direction, see
- * \ref libusb_endpoint_direction.
- */
- uint8_t bmRequestType;
-
- /** Request. If the type bits of bmRequestType are equal to
- * \ref libusb_request_type::LIBUSB_REQUEST_TYPE_STANDARD
- * "LIBUSB_REQUEST_TYPE_STANDARD" then this field refers to
- * \ref libusb_standard_request. For other cases, use of this field is
- * application-specific. */
- uint8_t bRequest;
-
- /** Value. Varies according to request */
- uint16_t wValue;
-
- /** Index. Varies according to request, typically used to pass an index
- * or offset */
- uint16_t wIndex;
-
- /** Number of bytes to transfer */
- uint16_t wLength;
-};
-
-#define LIBUSB_CONTROL_SETUP_SIZE (sizeof(struct libusb_control_setup))
-
-/* libusb */
-
-struct libusb_context;
-struct libusb_device;
-struct libusb_device_handle;
-struct libusb_hotplug_callback;
-
-/** \ingroup lib
- * Structure providing the version of the libusb runtime
- */
-struct libusb_version {
- /** Library major version. */
- const uint16_t major;
-
- /** Library minor version. */
- const uint16_t minor;
-
- /** Library micro version. */
- const uint16_t micro;
-
- /** Library nano version. */
- const uint16_t nano;
-
- /** Library release candidate suffix string, e.g. "-rc4". */
- const char *rc;
-
- /** For ABI compatibility only. */
- const char* describe;
-};
-
-/** \ingroup lib
- * Structure representing a libusb session. The concept of individual libusb
- * sessions allows for your program to use two libraries (or dynamically
- * load two modules) which both independently use libusb. This will prevent
- * interference between the individual libusb users - for example
- * libusb_set_debug() will not affect the other user of the library, and
- * libusb_exit() will not destroy resources that the other user is still
- * using.
- *
- * Sessions are created by libusb_init() and destroyed through libusb_exit().
- * If your application is guaranteed to only ever include a single libusb
- * user (i.e. you), you do not have to worry about contexts: pass NULL in
- * every function call where a context is required. The default context
- * will be used.
- *
- * For more information, see \ref contexts.
- */
-typedef struct libusb_context libusb_context;
-
-/** \ingroup dev
- * Structure representing a USB device detected on the system. This is an
- * opaque type for which you are only ever provided with a pointer, usually
- * originating from libusb_get_device_list().
- *
- * Certain operations can be performed on a device, but in order to do any
- * I/O you will have to first obtain a device handle using libusb_open().
- *
- * Devices are reference counted with libusb_ref_device() and
- * libusb_unref_device(), and are freed when the reference count reaches 0.
- * New devices presented by libusb_get_device_list() have a reference count of
- * 1, and libusb_free_device_list() can optionally decrease the reference count
- * on all devices in the list. libusb_open() adds another reference which is
- * later destroyed by libusb_close().
- */
-typedef struct libusb_device libusb_device;
-
-
-/** \ingroup dev
- * Structure representing a handle on a USB device. This is an opaque type for
- * which you are only ever provided with a pointer, usually originating from
- * libusb_open().
- *
- * A device handle is used to perform I/O and other operations. When finished
- * with a device handle, you should call libusb_close().
- */
-typedef struct libusb_device_handle libusb_device_handle;
-
-/** \ingroup dev
- * Speed codes. Indicates the speed at which the device is operating.
- */
-enum libusb_speed {
- /** The OS doesn't report or know the device speed. */
- LIBUSB_SPEED_UNKNOWN = 0,
-
- /** The device is operating at low speed (1.5MBit/s). */
- LIBUSB_SPEED_LOW = 1,
-
- /** The device is operating at full speed (12MBit/s). */
- LIBUSB_SPEED_FULL = 2,
-
- /** The device is operating at high speed (480MBit/s). */
- LIBUSB_SPEED_HIGH = 3,
-
- /** The device is operating at super speed (5000MBit/s). */
- LIBUSB_SPEED_SUPER = 4,
-};
-
-/** \ingroup dev
- * Supported speeds (wSpeedSupported) bitfield. Indicates what
- * speeds the device supports.
- */
-enum libusb_supported_speed {
- /** Low speed operation supported (1.5MBit/s). */
- LIBUSB_LOW_SPEED_OPERATION = 1,
-
- /** Full speed operation supported (12MBit/s). */
- LIBUSB_FULL_SPEED_OPERATION = 2,
-
- /** High speed operation supported (480MBit/s). */
- LIBUSB_HIGH_SPEED_OPERATION = 4,
-
- /** Superspeed operation supported (5000MBit/s). */
- LIBUSB_SUPER_SPEED_OPERATION = 8,
-};
-
-/** \ingroup dev
- * Masks for the bits of the
- * \ref libusb_usb_2_0_extension_descriptor::bmAttributes "bmAttributes" field
- * of the USB 2.0 Extension descriptor.
- */
-enum libusb_usb_2_0_extension_attributes {
- /** Supports Link Power Management (LPM) */
- LIBUSB_BM_LPM_SUPPORT = 2,
-};
-
-/** \ingroup dev
- * Masks for the bits of the
- * \ref libusb_ss_usb_device_capability_descriptor::bmAttributes "bmAttributes" field
- * field of the SuperSpeed USB Device Capability descriptor.
- */
-enum libusb_ss_usb_device_capability_attributes {
- /** Supports Latency Tolerance Messages (LTM) */
- LIBUSB_BM_LTM_SUPPORT = 2,
-};
-
-/** \ingroup dev
- * USB capability types
- */
-enum libusb_bos_type {
- /** Wireless USB device capability */
- LIBUSB_BT_WIRELESS_USB_DEVICE_CAPABILITY = 1,
-
- /** USB 2.0 extensions */
- LIBUSB_BT_USB_2_0_EXTENSION = 2,
-
- /** SuperSpeed USB device capability */
- LIBUSB_BT_SS_USB_DEVICE_CAPABILITY = 3,
-
- /** Container ID type */
- LIBUSB_BT_CONTAINER_ID = 4,
-};
-
-/** \ingroup misc
- * Error codes. Most libusb functions return 0 on success or one of these
- * codes on failure.
- * You can call libusb_error_name() to retrieve a string representation of an
- * error code or libusb_strerror() to get an end-user suitable description of
- * an error code.
- */
-enum libusb_error {
- /** Success (no error) */
- LIBUSB_SUCCESS = 0,
-
- /** Input/output error */
- LIBUSB_ERROR_IO = -1,
-
- /** Invalid parameter */
- LIBUSB_ERROR_INVALID_PARAM = -2,
-
- /** Access denied (insufficient permissions) */
- LIBUSB_ERROR_ACCESS = -3,
-
- /** No such device (it may have been disconnected) */
- LIBUSB_ERROR_NO_DEVICE = -4,
-
- /** Entity not found */
- LIBUSB_ERROR_NOT_FOUND = -5,
-
- /** Resource busy */
- LIBUSB_ERROR_BUSY = -6,
-
- /** Operation timed out */
- LIBUSB_ERROR_TIMEOUT = -7,
-
- /** Overflow */
- LIBUSB_ERROR_OVERFLOW = -8,
-
- /** Pipe error */
- LIBUSB_ERROR_PIPE = -9,
-
- /** System call interrupted (perhaps due to signal) */
- LIBUSB_ERROR_INTERRUPTED = -10,
-
- /** Insufficient memory */
- LIBUSB_ERROR_NO_MEM = -11,
-
- /** Operation not supported or unimplemented on this platform */
- LIBUSB_ERROR_NOT_SUPPORTED = -12,
-
- /* NB: Remember to update LIBUSB_ERROR_COUNT below as well as the
- message strings in strerror.c when adding new error codes here. */
-
- /** Other error */
- LIBUSB_ERROR_OTHER = -99,
-};
-
-/* Total number of error codes in enum libusb_error */
-#define LIBUSB_ERROR_COUNT 14
-
-/** \ingroup asyncio
- * Transfer status codes */
-enum libusb_transfer_status {
- /** Transfer completed without error. Note that this does not indicate
- * that the entire amount of requested data was transferred. */
- LIBUSB_TRANSFER_COMPLETED,
-
- /** Transfer failed */
- LIBUSB_TRANSFER_ERROR,
-
- /** Transfer timed out */
- LIBUSB_TRANSFER_TIMED_OUT,
-
- /** Transfer was cancelled */
- LIBUSB_TRANSFER_CANCELLED,
-
- /** For bulk/interrupt endpoints: halt condition detected (endpoint
- * stalled). For control endpoints: control request not supported. */
- LIBUSB_TRANSFER_STALL,
-
- /** Device was disconnected */
- LIBUSB_TRANSFER_NO_DEVICE,
-
- /** Device sent more data than requested */
- LIBUSB_TRANSFER_OVERFLOW,
-
- /* NB! Remember to update libusb_error_name()
- when adding new status codes here. */
-};
-
-/** \ingroup asyncio
- * libusb_transfer.flags values */
-enum libusb_transfer_flags {
- /** Report short frames as errors */
- LIBUSB_TRANSFER_SHORT_NOT_OK = 1<<0,
-
- /** Automatically free() transfer buffer during libusb_free_transfer() */
- LIBUSB_TRANSFER_FREE_BUFFER = 1<<1,
-
- /** Automatically call libusb_free_transfer() after callback returns.
- * If this flag is set, it is illegal to call libusb_free_transfer()
- * from your transfer callback, as this will result in a double-free
- * when this flag is acted upon. */
- LIBUSB_TRANSFER_FREE_TRANSFER = 1<<2,
-
- /** Terminate transfers that are a multiple of the endpoint's
- * wMaxPacketSize with an extra zero length packet. This is useful
- * when a device protocol mandates that each logical request is
- * terminated by an incomplete packet (i.e. the logical requests are
- * not separated by other means).
- *
- * This flag only affects host-to-device transfers to bulk and interrupt
- * endpoints. In other situations, it is ignored.
- *
- * This flag only affects transfers with a length that is a multiple of
- * the endpoint's wMaxPacketSize. On transfers of other lengths, this
- * flag has no effect. Therefore, if you are working with a device that
- * needs a ZLP whenever the end of the logical request falls on a packet
- * boundary, then it is sensible to set this flag on <em>every</em>
- * transfer (you do not have to worry about only setting it on transfers
- * that end on the boundary).
- *
- * This flag is currently only supported on Linux.
- * On other systems, libusb_submit_transfer() will return
- * LIBUSB_ERROR_NOT_SUPPORTED for every transfer where this flag is set.
- *
- * Available since libusb-1.0.9.
- */
- LIBUSB_TRANSFER_ADD_ZERO_PACKET = 1 << 3,
-};
-
-/** \ingroup asyncio
- * Isochronous packet descriptor. */
-struct libusb_iso_packet_descriptor {
- /** Length of data to request in this packet */
- unsigned int length;
-
- /** Amount of data that was actually transferred */
- unsigned int actual_length;
-
- /** Status code for this packet */
- enum libusb_transfer_status status;
-};
-
-struct libusb_transfer;
-
-/** \ingroup asyncio
- * Asynchronous transfer callback function type. When submitting asynchronous
- * transfers, you pass a pointer to a callback function of this type via the
- * \ref libusb_transfer::callback "callback" member of the libusb_transfer
- * structure. libusb will call this function later, when the transfer has
- * completed or failed. See \ref asyncio for more information.
- * \param transfer The libusb_transfer struct the callback function is being
- * notified about.
- */
-typedef void (LIBUSB_CALL *libusb_transfer_cb_fn)(struct libusb_transfer *transfer);
-
-/** \ingroup asyncio
- * The generic USB transfer structure. The user populates this structure and
- * then submits it in order to request a transfer. After the transfer has
- * completed, the library populates the transfer with the results and passes
- * it back to the user.
- */
-struct libusb_transfer {
- /** Handle of the device that this transfer will be submitted to */
- libusb_device_handle *dev_handle;
-
- /** A bitwise OR combination of \ref libusb_transfer_flags. */
- uint8_t flags;
-
- /** Address of the endpoint where this transfer will be sent. */
- unsigned char endpoint;
-
- /** Type of the endpoint from \ref libusb_transfer_type */
- unsigned char type;
-
- /** Timeout for this transfer in millseconds. A value of 0 indicates no
- * timeout. */
- unsigned int timeout;
-
- /** The status of the transfer. Read-only, and only for use within
- * transfer callback function.
- *
- * If this is an isochronous transfer, this field may read COMPLETED even
- * if there were errors in the frames. Use the
- * \ref libusb_iso_packet_descriptor::status "status" field in each packet
- * to determine if errors occurred. */
- enum libusb_transfer_status status;
-
- /** Length of the data buffer */
- int length;
-
- /** Actual length of data that was transferred. Read-only, and only for
- * use within transfer callback function. Not valid for isochronous
- * endpoint transfers. */
- int actual_length;
-
- /** Callback function. This will be invoked when the transfer completes,
- * fails, or is cancelled. */
- libusb_transfer_cb_fn callback;
-
- /** User context data to pass to the callback function. */
- void *user_data;
-
- /** Data buffer */
- unsigned char *buffer;
-
- /** Number of isochronous packets. Only used for I/O with isochronous
- * endpoints. */
- int num_iso_packets;
-
- /** Isochronous packet descriptors, for isochronous transfers only. */
- struct libusb_iso_packet_descriptor iso_packet_desc
-#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L)
- [] /* valid C99 code */
-#else
- [0] /* non-standard, but usually working code */
-#endif
- ;
-};
-
-/** \ingroup misc
- * Capabilities supported by an instance of libusb on the current running
- * platform. Test if the loaded library supports a given capability by calling
- * \ref libusb_has_capability().
- */
-enum libusb_capability {
- /** The libusb_has_capability() API is available. */
- LIBUSB_CAP_HAS_CAPABILITY = 0x0000,
- /** Hotplug support is available on this platform. */
- LIBUSB_CAP_HAS_HOTPLUG = 0x0001,
- /** The library can access HID devices without requiring user intervention.
- * Note that before being able to actually access an HID device, you may
- * still have to call additional libusb functions such as
- * \ref libusb_detach_kernel_driver(). */
- LIBUSB_CAP_HAS_HID_ACCESS = 0x0100,
- /** The library supports detaching of the default USB driver, using
- * \ref libusb_detach_kernel_driver(), if one is set by the OS kernel */
- LIBUSB_CAP_SUPPORTS_DETACH_KERNEL_DRIVER = 0x0101
-};
-
-/** \ingroup lib
- * Log message levels.
- * - LIBUSB_LOG_LEVEL_NONE (0) : no messages ever printed by the library (default)
- * - LIBUSB_LOG_LEVEL_ERROR (1) : error messages are printed to stderr
- * - LIBUSB_LOG_LEVEL_WARNING (2) : warning and error messages are printed to stderr
- * - LIBUSB_LOG_LEVEL_INFO (3) : informational messages are printed to stdout, warning
- * and error messages are printed to stderr
- * - LIBUSB_LOG_LEVEL_DEBUG (4) : debug and informational messages are printed to stdout,
- * warnings and errors to stderr
- */
-enum libusb_log_level {
- LIBUSB_LOG_LEVEL_NONE = 0,
- LIBUSB_LOG_LEVEL_ERROR,
- LIBUSB_LOG_LEVEL_WARNING,
- LIBUSB_LOG_LEVEL_INFO,
- LIBUSB_LOG_LEVEL_DEBUG,
-};
-
-int LIBUSB_CALL libusb_init(libusb_context **ctx);
-void LIBUSB_CALL libusb_exit(libusb_context *ctx);
-void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
-const struct libusb_version * LIBUSB_CALL libusb_get_version(void);
-int LIBUSB_CALL libusb_has_capability(uint32_t capability);
-const char * LIBUSB_CALL libusb_error_name(int errcode);
-int LIBUSB_CALL libusb_setlocale(const char *locale);
-const char * LIBUSB_CALL libusb_strerror(enum libusb_error errcode);
-
-ssize_t LIBUSB_CALL libusb_get_device_list(libusb_context *ctx,
- libusb_device ***list);
-void LIBUSB_CALL libusb_free_device_list(libusb_device **list,
- int unref_devices);
-libusb_device * LIBUSB_CALL libusb_ref_device(libusb_device *dev);
-void LIBUSB_CALL libusb_unref_device(libusb_device *dev);
-
-int LIBUSB_CALL libusb_get_configuration(libusb_device_handle *dev,
- int *config);
-int LIBUSB_CALL libusb_get_device_descriptor(libusb_device *dev,
- struct libusb_device_descriptor *desc);
-int LIBUSB_CALL libusb_get_active_config_descriptor(libusb_device *dev,
- struct libusb_config_descriptor **config);
-int LIBUSB_CALL libusb_get_config_descriptor(libusb_device *dev,
- uint8_t config_index, struct libusb_config_descriptor **config);
-int LIBUSB_CALL libusb_get_config_descriptor_by_value(libusb_device *dev,
- uint8_t bConfigurationValue, struct libusb_config_descriptor **config);
-void LIBUSB_CALL libusb_free_config_descriptor(
- struct libusb_config_descriptor *config);
-int LIBUSB_CALL libusb_get_ss_endpoint_companion_descriptor(
- struct libusb_context *ctx,
- const struct libusb_endpoint_descriptor *endpoint,
- struct libusb_ss_endpoint_companion_descriptor **ep_comp);
-void LIBUSB_CALL libusb_free_ss_endpoint_companion_descriptor(
- struct libusb_ss_endpoint_companion_descriptor *ep_comp);
-int LIBUSB_CALL libusb_get_bos_descriptor(libusb_device_handle *handle,
- struct libusb_bos_descriptor **bos);
-void LIBUSB_CALL libusb_free_bos_descriptor(struct libusb_bos_descriptor *bos);
-int LIBUSB_CALL libusb_get_usb_2_0_extension_descriptor(
- struct libusb_context *ctx,
- struct libusb_bos_dev_capability_descriptor *dev_cap,
- struct libusb_usb_2_0_extension_descriptor **usb_2_0_extension);
-void LIBUSB_CALL libusb_free_usb_2_0_extension_descriptor(
- struct libusb_usb_2_0_extension_descriptor *usb_2_0_extension);
-int LIBUSB_CALL libusb_get_ss_usb_device_capability_descriptor(
- struct libusb_context *ctx,
- struct libusb_bos_dev_capability_descriptor *dev_cap,
- struct libusb_ss_usb_device_capability_descriptor **ss_usb_device_cap);
-void LIBUSB_CALL libusb_free_ss_usb_device_capability_descriptor(
- struct libusb_ss_usb_device_capability_descriptor *ss_usb_device_cap);
-int LIBUSB_CALL libusb_get_container_id_descriptor(struct libusb_context *ctx,
- struct libusb_bos_dev_capability_descriptor *dev_cap,
- struct libusb_container_id_descriptor **container_id);
-void LIBUSB_CALL libusb_free_container_id_descriptor(
- struct libusb_container_id_descriptor *container_id);
-uint8_t LIBUSB_CALL libusb_get_bus_number(libusb_device *dev);
-uint8_t LIBUSB_CALL libusb_get_port_number(libusb_device *dev);
-int LIBUSB_CALL libusb_get_port_numbers(libusb_device *dev, uint8_t* port_numbers, int port_numbers_len);
-LIBUSB_DEPRECATED_FOR(libusb_get_port_numbers)
-int LIBUSB_CALL libusb_get_port_path(libusb_context *ctx, libusb_device *dev, uint8_t* path, uint8_t path_length);
-libusb_device * LIBUSB_CALL libusb_get_parent(libusb_device *dev);
-uint8_t LIBUSB_CALL libusb_get_device_address(libusb_device *dev);
-int LIBUSB_CALL libusb_get_device_speed(libusb_device *dev);
-int LIBUSB_CALL libusb_get_max_packet_size(libusb_device *dev,
- unsigned char endpoint);
-int LIBUSB_CALL libusb_get_max_iso_packet_size(libusb_device *dev,
- unsigned char endpoint);
-
-int LIBUSB_CALL libusb_open(libusb_device *dev, libusb_device_handle **handle);
-void LIBUSB_CALL libusb_close(libusb_device_handle *dev_handle);
-libusb_device * LIBUSB_CALL libusb_get_device(libusb_device_handle *dev_handle);
-
-int LIBUSB_CALL libusb_set_configuration(libusb_device_handle *dev,
- int configuration);
-int LIBUSB_CALL libusb_claim_interface(libusb_device_handle *dev,
- int interface_number);
-int LIBUSB_CALL libusb_release_interface(libusb_device_handle *dev,
- int interface_number);
-
-libusb_device_handle * LIBUSB_CALL libusb_open_device_with_vid_pid(
- libusb_context *ctx, uint16_t vendor_id, uint16_t product_id);
-
-int LIBUSB_CALL libusb_set_interface_alt_setting(libusb_device_handle *dev,
- int interface_number, int alternate_setting);
-int LIBUSB_CALL libusb_clear_halt(libusb_device_handle *dev,
- unsigned char endpoint);
-int LIBUSB_CALL libusb_reset_device(libusb_device_handle *dev);
-
-int LIBUSB_CALL libusb_alloc_streams(libusb_device_handle *dev,
- uint32_t num_streams, unsigned char *endpoints, int num_endpoints);
-int LIBUSB_CALL libusb_free_streams(libusb_device_handle *dev,
- unsigned char *endpoints, int num_endpoints);
-
-int LIBUSB_CALL libusb_kernel_driver_active(libusb_device_handle *dev,
- int interface_number);
-int LIBUSB_CALL libusb_detach_kernel_driver(libusb_device_handle *dev,
- int interface_number);
-int LIBUSB_CALL libusb_attach_kernel_driver(libusb_device_handle *dev,
- int interface_number);
-int LIBUSB_CALL libusb_set_auto_detach_kernel_driver(
- libusb_device_handle *dev, int enable);
-
-/* async I/O */
-
-/** \ingroup asyncio
- * Get the data section of a control transfer. This convenience function is here
- * to remind you that the data does not start until 8 bytes into the actual
- * buffer, as the setup packet comes first.
- *
- * Calling this function only makes sense from a transfer callback function,
- * or situations where you have already allocated a suitably sized buffer at
- * transfer->buffer.
- *
- * \param transfer a transfer
- * \returns pointer to the first byte of the data section
- */
-static inline unsigned char *libusb_control_transfer_get_data(
- struct libusb_transfer *transfer)
-{
- return transfer->buffer + LIBUSB_CONTROL_SETUP_SIZE;
-}
-
-/** \ingroup asyncio
- * Get the control setup packet of a control transfer. This convenience
- * function is here to remind you that the control setup occupies the first
- * 8 bytes of the transfer data buffer.
- *
- * Calling this function only makes sense from a transfer callback function,
- * or situations where you have already allocated a suitably sized buffer at
- * transfer->buffer.
- *
- * \param transfer a transfer
- * \returns a casted pointer to the start of the transfer data buffer
- */
-static inline struct libusb_control_setup *libusb_control_transfer_get_setup(
- struct libusb_transfer *transfer)
-{
- return (struct libusb_control_setup *)(void *) transfer->buffer;
-}
-
-/** \ingroup asyncio
- * Helper function to populate the setup packet (first 8 bytes of the data
- * buffer) for a control transfer. The wIndex, wValue and wLength values should
- * be given in host-endian byte order.
- *
- * \param buffer buffer to output the setup packet into
- * This pointer must be aligned to at least 2 bytes boundary.
- * \param bmRequestType see the
- * \ref libusb_control_setup::bmRequestType "bmRequestType" field of
- * \ref libusb_control_setup
- * \param bRequest see the
- * \ref libusb_control_setup::bRequest "bRequest" field of
- * \ref libusb_control_setup
- * \param wValue see the
- * \ref libusb_control_setup::wValue "wValue" field of
- * \ref libusb_control_setup
- * \param wIndex see the
- * \ref libusb_control_setup::wIndex "wIndex" field of
- * \ref libusb_control_setup
- * \param wLength see the
- * \ref libusb_control_setup::wLength "wLength" field of
- * \ref libusb_control_setup
- */
-static inline void libusb_fill_control_setup(unsigned char *buffer,
- uint8_t bmRequestType, uint8_t bRequest, uint16_t wValue, uint16_t wIndex,
- uint16_t wLength)
-{
- struct libusb_control_setup *setup = (struct libusb_control_setup *)(void *) buffer;
- setup->bmRequestType = bmRequestType;
- setup->bRequest = bRequest;
- setup->wValue = libusb_cpu_to_le16(wValue);
- setup->wIndex = libusb_cpu_to_le16(wIndex);
- setup->wLength = libusb_cpu_to_le16(wLength);
-}
-
-struct libusb_transfer * LIBUSB_CALL libusb_alloc_transfer(int iso_packets);
-int LIBUSB_CALL libusb_submit_transfer(struct libusb_transfer *transfer);
-int LIBUSB_CALL libusb_cancel_transfer(struct libusb_transfer *transfer);
-void LIBUSB_CALL libusb_free_transfer(struct libusb_transfer *transfer);
-void LIBUSB_CALL libusb_transfer_set_stream_id(
- struct libusb_transfer *transfer, uint32_t stream_id);
-uint32_t LIBUSB_CALL libusb_transfer_get_stream_id(
- struct libusb_transfer *transfer);
-
-/** \ingroup asyncio
- * Helper function to populate the required \ref libusb_transfer fields
- * for a control transfer.
- *
- * If you pass a transfer buffer to this function, the first 8 bytes will
- * be interpreted as a control setup packet, and the wLength field will be
- * used to automatically populate the \ref libusb_transfer::length "length"
- * field of the transfer. Therefore the recommended approach is:
- * -# Allocate a suitably sized data buffer (including space for control setup)
- * -# Call libusb_fill_control_setup()
- * -# If this is a host-to-device transfer with a data stage, put the data
- * in place after the setup packet
- * -# Call this function
- * -# Call libusb_submit_transfer()
- *
- * It is also legal to pass a NULL buffer to this function, in which case this
- * function will not attempt to populate the length field. Remember that you
- * must then populate the buffer and length fields later.
- *
- * \param transfer the transfer to populate
- * \param dev_handle handle of the device that will handle the transfer
- * \param buffer data buffer. If provided, this function will interpret the
- * first 8 bytes as a setup packet and infer the transfer length from that.
- * This pointer must be aligned to at least 2 bytes boundary.
- * \param callback callback function to be invoked on transfer completion
- * \param user_data user data to pass to callback function
- * \param timeout timeout for the transfer in milliseconds
- */
-static inline void libusb_fill_control_transfer(
- struct libusb_transfer *transfer, libusb_device_handle *dev_handle,
- unsigned char *buffer, libusb_transfer_cb_fn callback, void *user_data,
- unsigned int timeout)
-{
- struct libusb_control_setup *setup = (struct libusb_control_setup *)(void *) buffer;
- transfer->dev_handle = dev_handle;
- transfer->endpoint = 0;
- transfer->type = LIBUSB_TRANSFER_TYPE_CONTROL;
- transfer->timeout = timeout;
- transfer->buffer = buffer;
- if (setup)
- transfer->length = (int) (LIBUSB_CONTROL_SETUP_SIZE
- + libusb_le16_to_cpu(setup->wLength));
- transfer->user_data = user_data;
- transfer->callback = callback;
-}
-
-/** \ingroup asyncio
- * Helper function to populate the required \ref libusb_transfer fields
- * for a bulk transfer.
- *
- * \param transfer the transfer to populate
- * \param dev_handle handle of the device that will handle the transfer
- * \param endpoint address of the endpoint where this transfer will be sent
- * \param buffer data buffer
- * \param length length of data buffer
- * \param callback callback function to be invoked on transfer completion
- * \param user_data user data to pass to callback function
- * \param timeout timeout for the transfer in milliseconds
- */
-static inline void libusb_fill_bulk_transfer(struct libusb_transfer *transfer,
- libusb_device_handle *dev_handle, unsigned char endpoint,
- unsigned char *buffer, int length, libusb_transfer_cb_fn callback,
- void *user_data, unsigned int timeout)
-{
- transfer->dev_handle = dev_handle;
- transfer->endpoint = endpoint;
- transfer->type = LIBUSB_TRANSFER_TYPE_BULK;
- transfer->timeout = timeout;
- transfer->buffer = buffer;
- transfer->length = length;
- transfer->user_data = user_data;
- transfer->callback = callback;
-}
-
-/** \ingroup asyncio
- * Helper function to populate the required \ref libusb_transfer fields
- * for a bulk transfer using bulk streams.
- *
- * Since version 1.0.19, \ref LIBUSB_API_VERSION >= 0x01000103
- *
- * \param transfer the transfer to populate
- * \param dev_handle handle of the device that will handle the transfer
- * \param endpoint address of the endpoint where this transfer will be sent
- * \param stream_id bulk stream id for this transfer
- * \param buffer data buffer
- * \param length length of data buffer
- * \param callback callback function to be invoked on transfer completion
- * \param user_data user data to pass to callback function
- * \param timeout timeout for the transfer in milliseconds
- */
-static inline void libusb_fill_bulk_stream_transfer(
- struct libusb_transfer *transfer, libusb_device_handle *dev_handle,
- unsigned char endpoint, uint32_t stream_id,
- unsigned char *buffer, int length, libusb_transfer_cb_fn callback,
- void *user_data, unsigned int timeout)
-{
- libusb_fill_bulk_transfer(transfer, dev_handle, endpoint, buffer,
- length, callback, user_data, timeout);
- transfer->type = LIBUSB_TRANSFER_TYPE_BULK_STREAM;
- libusb_transfer_set_stream_id(transfer, stream_id);
-}
-
-/** \ingroup asyncio
- * Helper function to populate the required \ref libusb_transfer fields
- * for an interrupt transfer.
- *
- * \param transfer the transfer to populate
- * \param dev_handle handle of the device that will handle the transfer
- * \param endpoint address of the endpoint where this transfer will be sent
- * \param buffer data buffer
- * \param length length of data buffer
- * \param callback callback function to be invoked on transfer completion
- * \param user_data user data to pass to callback function
- * \param timeout timeout for the transfer in milliseconds
- */
-static inline void libusb_fill_interrupt_transfer(
- struct libusb_transfer *transfer, libusb_device_handle *dev_handle,
- unsigned char endpoint, unsigned char *buffer, int length,
- libusb_transfer_cb_fn callback, void *user_data, unsigned int timeout)
-{
- transfer->dev_handle = dev_handle;
- transfer->endpoint = endpoint;
- transfer->type = LIBUSB_TRANSFER_TYPE_INTERRUPT;
- transfer->timeout = timeout;
- transfer->buffer = buffer;
- transfer->length = length;
- transfer->user_data = user_data;
- transfer->callback = callback;
-}
-
-/** \ingroup asyncio
- * Helper function to populate the required \ref libusb_transfer fields
- * for an isochronous transfer.
- *
- * \param transfer the transfer to populate
- * \param dev_handle handle of the device that will handle the transfer
- * \param endpoint address of the endpoint where this transfer will be sent
- * \param buffer data buffer
- * \param length length of data buffer
- * \param num_iso_packets the number of isochronous packets
- * \param callback callback function to be invoked on transfer completion
- * \param user_data user data to pass to callback function
- * \param timeout timeout for the transfer in milliseconds
- */
-static inline void libusb_fill_iso_transfer(struct libusb_transfer *transfer,
- libusb_device_handle *dev_handle, unsigned char endpoint,
- unsigned char *buffer, int length, int num_iso_packets,
- libusb_transfer_cb_fn callback, void *user_data, unsigned int timeout)
-{
- transfer->dev_handle = dev_handle;
- transfer->endpoint = endpoint;
- transfer->type = LIBUSB_TRANSFER_TYPE_ISOCHRONOUS;
- transfer->timeout = timeout;
- transfer->buffer = buffer;
- transfer->length = length;
- transfer->num_iso_packets = num_iso_packets;
- transfer->user_data = user_data;
- transfer->callback = callback;
-}
-
-/** \ingroup asyncio
- * Convenience function to set the length of all packets in an isochronous
- * transfer, based on the num_iso_packets field in the transfer structure.
- *
- * \param transfer a transfer
- * \param length the length to set in each isochronous packet descriptor
- * \see libusb_get_max_packet_size()
- */
-static inline void libusb_set_iso_packet_lengths(
- struct libusb_transfer *transfer, unsigned int length)
-{
- int i;
- for (i = 0; i < transfer->num_iso_packets; i++)
- transfer->iso_packet_desc[i].length = length;
-}
-
-/** \ingroup asyncio
- * Convenience function to locate the position of an isochronous packet
- * within the buffer of an isochronous transfer.
- *
- * This is a thorough function which loops through all preceding packets,
- * accumulating their lengths to find the position of the specified packet.
- * Typically you will assign equal lengths to each packet in the transfer,
- * and hence the above method is sub-optimal. You may wish to use
- * libusb_get_iso_packet_buffer_simple() instead.
- *
- * \param transfer a transfer
- * \param packet the packet to return the address of
- * \returns the base address of the packet buffer inside the transfer buffer,
- * or NULL if the packet does not exist.
- * \see libusb_get_iso_packet_buffer_simple()
- */
-static inline unsigned char *libusb_get_iso_packet_buffer(
- struct libusb_transfer *transfer, unsigned int packet)
-{
- int i;
- size_t offset = 0;
- int _packet;
-
- /* oops..slight bug in the API. packet is an unsigned int, but we use
- * signed integers almost everywhere else. range-check and convert to
- * signed to avoid compiler warnings. FIXME for libusb-2. */
- if (packet > INT_MAX)
- return NULL;
- _packet = (int) packet;
-
- if (_packet >= transfer->num_iso_packets)
- return NULL;
-
- for (i = 0; i < _packet; i++)
- offset += transfer->iso_packet_desc[i].length;
-
- return transfer->buffer + offset;
-}
-
-/** \ingroup asyncio
- * Convenience function to locate the position of an isochronous packet
- * within the buffer of an isochronous transfer, for transfers where each
- * packet is of identical size.
- *
- * This function relies on the assumption that every packet within the transfer
- * is of identical size to the first packet. Calculating the location of
- * the packet buffer is then just a simple calculation:
- * <tt>buffer + (packet_size * packet)</tt>
- *
- * Do not use this function on transfers other than those that have identical
- * packet lengths for each packet.
- *
- * \param transfer a transfer
- * \param packet the packet to return the address of
- * \returns the base address of the packet buffer inside the transfer buffer,
- * or NULL if the packet does not exist.
- * \see libusb_get_iso_packet_buffer()
- */
-static inline unsigned char *libusb_get_iso_packet_buffer_simple(
- struct libusb_transfer *transfer, unsigned int packet)
-{
- int _packet;
-
- /* oops..slight bug in the API. packet is an unsigned int, but we use
- * signed integers almost everywhere else. range-check and convert to
- * signed to avoid compiler warnings. FIXME for libusb-2. */
- if (packet > INT_MAX)
- return NULL;
- _packet = (int) packet;
-
- if (_packet >= transfer->num_iso_packets)
- return NULL;
-
- return transfer->buffer + ((int) transfer->iso_packet_desc[0].length * _packet);
-}
-
-/* sync I/O */
-
-int LIBUSB_CALL libusb_control_transfer(libusb_device_handle *dev_handle,
- uint8_t request_type, uint8_t bRequest, uint16_t wValue, uint16_t wIndex,
- unsigned char *data, uint16_t wLength, unsigned int timeout);
-
-int LIBUSB_CALL libusb_bulk_transfer(libusb_device_handle *dev_handle,
- unsigned char endpoint, unsigned char *data, int length,
- int *actual_length, unsigned int timeout);
-
-int LIBUSB_CALL libusb_interrupt_transfer(libusb_device_handle *dev_handle,
- unsigned char endpoint, unsigned char *data, int length,
- int *actual_length, unsigned int timeout);
-
-/** \ingroup desc
- * Retrieve a descriptor from the default control pipe.
- * This is a convenience function which formulates the appropriate control
- * message to retrieve the descriptor.
- *
- * \param dev a device handle
- * \param desc_type the descriptor type, see \ref libusb_descriptor_type
- * \param desc_index the index of the descriptor to retrieve
- * \param data output buffer for descriptor
- * \param length size of data buffer
- * \returns number of bytes returned in data, or LIBUSB_ERROR code on failure
- */
-static inline int libusb_get_descriptor(libusb_device_handle *dev,
- uint8_t desc_type, uint8_t desc_index, unsigned char *data, int length)
-{
- return libusb_control_transfer(dev, LIBUSB_ENDPOINT_IN,
- LIBUSB_REQUEST_GET_DESCRIPTOR, (uint16_t) ((desc_type << 8) | desc_index),
- 0, data, (uint16_t) length, 1000);
-}
-
-/** \ingroup desc
- * Retrieve a descriptor from a device.
- * This is a convenience function which formulates the appropriate control
- * message to retrieve the descriptor. The string returned is Unicode, as
- * detailed in the USB specifications.
- *
- * \param dev a device handle
- * \param desc_index the index of the descriptor to retrieve
- * \param langid the language ID for the string descriptor
- * \param data output buffer for descriptor
- * \param length size of data buffer
- * \returns number of bytes returned in data, or LIBUSB_ERROR code on failure
- * \see libusb_get_string_descriptor_ascii()
- */
-static inline int libusb_get_string_descriptor(libusb_device_handle *dev,
- uint8_t desc_index, uint16_t langid, unsigned char *data, int length)
-{
- return libusb_control_transfer(dev, LIBUSB_ENDPOINT_IN,
- LIBUSB_REQUEST_GET_DESCRIPTOR, (uint16_t)((LIBUSB_DT_STRING << 8) | desc_index),
- langid, data, (uint16_t) length, 1000);
-}
-
-int LIBUSB_CALL libusb_get_string_descriptor_ascii(libusb_device_handle *dev,
- uint8_t desc_index, unsigned char *data, int length);
-
-/* polling and timeouts */
-
-int LIBUSB_CALL libusb_try_lock_events(libusb_context *ctx);
-void LIBUSB_CALL libusb_lock_events(libusb_context *ctx);
-void LIBUSB_CALL libusb_unlock_events(libusb_context *ctx);
-int LIBUSB_CALL libusb_event_handling_ok(libusb_context *ctx);
-int LIBUSB_CALL libusb_event_handler_active(libusb_context *ctx);
-void LIBUSB_CALL libusb_lock_event_waiters(libusb_context *ctx);
-void LIBUSB_CALL libusb_unlock_event_waiters(libusb_context *ctx);
-int LIBUSB_CALL libusb_wait_for_event(libusb_context *ctx, struct timeval *tv);
-
-int LIBUSB_CALL libusb_handle_events_timeout(libusb_context *ctx,
- struct timeval *tv);
-int LIBUSB_CALL libusb_handle_events_timeout_completed(libusb_context *ctx,
- struct timeval *tv, int *completed);
-int LIBUSB_CALL libusb_handle_events(libusb_context *ctx);
-int LIBUSB_CALL libusb_handle_events_completed(libusb_context *ctx, int *completed);
-int LIBUSB_CALL libusb_handle_events_locked(libusb_context *ctx,
- struct timeval *tv);
-int LIBUSB_CALL libusb_pollfds_handle_timeouts(libusb_context *ctx);
-int LIBUSB_CALL libusb_get_next_timeout(libusb_context *ctx,
- struct timeval *tv);
-
-/** \ingroup poll
- * File descriptor for polling
- */
-struct libusb_pollfd {
- /** Numeric file descriptor */
- int fd;
-
- /** Event flags to poll for from <poll.h>. POLLIN indicates that you
- * should monitor this file descriptor for becoming ready to read from,
- * and POLLOUT indicates that you should monitor this file descriptor for
- * nonblocking write readiness. */
- short events;
-};
-
-/** \ingroup poll
- * Callback function, invoked when a new file descriptor should be added
- * to the set of file descriptors monitored for events.
- * \param fd the new file descriptor
- * \param events events to monitor for, see \ref libusb_pollfd for a
- * description
- * \param user_data User data pointer specified in
- * libusb_set_pollfd_notifiers() call
- * \see libusb_set_pollfd_notifiers()
- */
-typedef void (LIBUSB_CALL *libusb_pollfd_added_cb)(int fd, short events,
- void *user_data);
-
-/** \ingroup poll
- * Callback function, invoked when a file descriptor should be removed from
- * the set of file descriptors being monitored for events. After returning
- * from this callback, do not use that file descriptor again.
- * \param fd the file descriptor to stop monitoring
- * \param user_data User data pointer specified in
- * libusb_set_pollfd_notifiers() call
- * \see libusb_set_pollfd_notifiers()
- */
-typedef void (LIBUSB_CALL *libusb_pollfd_removed_cb)(int fd, void *user_data);
-
-const struct libusb_pollfd ** LIBUSB_CALL libusb_get_pollfds(
- libusb_context *ctx);
-void LIBUSB_CALL libusb_set_pollfd_notifiers(libusb_context *ctx,
- libusb_pollfd_added_cb added_cb, libusb_pollfd_removed_cb removed_cb,
- void *user_data);
-
-/** \ingroup hotplug
- * Callback handle.
- *
- * Callbacks handles are generated by libusb_hotplug_register_callback()
- * and can be used to deregister callbacks. Callback handles are unique
- * per libusb_context and it is safe to call libusb_hotplug_deregister_callback()
- * on an already deregisted callback.
- *
- * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
- *
- * For more information, see \ref hotplug.
- */
-typedef int libusb_hotplug_callback_handle;
-
-/** \ingroup hotplug
- *
- * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
- *
- * Flags for hotplug events */
-typedef enum {
- /** Arm the callback and fire it for all matching currently attached devices. */
- LIBUSB_HOTPLUG_ENUMERATE = 1,
-} libusb_hotplug_flag;
-
-/** \ingroup hotplug
- *
- * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
- *
- * Hotplug events */
-typedef enum {
- /** A device has been plugged in and is ready to use */
- LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED = 0x01,
-
- /** A device has left and is no longer available.
- * It is the user's responsibility to call libusb_close on any handle associated with a disconnected device.
- * It is safe to call libusb_get_device_descriptor on a device that has left */
- LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT = 0x02,
-} libusb_hotplug_event;
-
-/** \ingroup hotplug
- * Wildcard matching for hotplug events */
-#define LIBUSB_HOTPLUG_MATCH_ANY -1
-
-/** \ingroup hotplug
- * Hotplug callback function type. When requesting hotplug event notifications,
- * you pass a pointer to a callback function of this type.
- *
- * This callback may be called by an internal event thread and as such it is
- * recommended the callback do minimal processing before returning.
- *
- * libusb will call this function later, when a matching event had happened on
- * a matching device. See \ref hotplug for more information.
- *
- * It is safe to call either libusb_hotplug_register_callback() or
- * libusb_hotplug_deregister_callback() from within a callback function.
- *
- * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
- *
- * \param ctx context of this notification
- * \param device libusb_device this event occurred on
- * \param event event that occurred
- * \param user_data user data provided when this callback was registered
- * \returns bool whether this callback is finished processing events.
- * returning 1 will cause this callback to be deregistered
- */
-typedef int (LIBUSB_CALL *libusb_hotplug_callback_fn)(libusb_context *ctx,
- libusb_device *device,
- libusb_hotplug_event event,
- void *user_data);
-
-/** \ingroup hotplug
- * Register a hotplug callback function
- *
- * Register a callback with the libusb_context. The callback will fire
- * when a matching event occurs on a matching device. The callback is
- * armed until either it is deregistered with libusb_hotplug_deregister_callback()
- * or the supplied callback returns 1 to indicate it is finished processing events.
- *
- * If the \ref LIBUSB_HOTPLUG_ENUMERATE is passed the callback will be
- * called with a \ref LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED for all devices
- * already plugged into the machine. Note that libusb modifies its internal
- * device list from a separate thread, while calling hotplug callbacks from
- * libusb_handle_events(), so it is possible for a device to already be present
- * on, or removed from, its internal device list, while the hotplug callbacks
- * still need to be dispatched. This means that when using \ref
- * LIBUSB_HOTPLUG_ENUMERATE, your callback may be called twice for the arrival
- * of the same device, once from libusb_hotplug_register_callback() and once
- * from libusb_handle_events(); and/or your callback may be called for the
- * removal of a device for which an arrived call was never made.
- *
- * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
- *
- * \param[in] ctx context to register this callback with
- * \param[in] events bitwise or of events that will trigger this callback. See \ref
- * libusb_hotplug_event
- * \param[in] flags hotplug callback flags. See \ref libusb_hotplug_flag
- * \param[in] vendor_id the vendor id to match or \ref LIBUSB_HOTPLUG_MATCH_ANY
- * \param[in] product_id the product id to match or \ref LIBUSB_HOTPLUG_MATCH_ANY
- * \param[in] dev_class the device class to match or \ref LIBUSB_HOTPLUG_MATCH_ANY
- * \param[in] cb_fn the function to be invoked on a matching event/device
- * \param[in] user_data user data to pass to the callback function
- * \param[out] handle pointer to store the handle of the allocated callback (can be NULL)
- * \returns LIBUSB_SUCCESS on success LIBUSB_ERROR code on failure
- */
-int LIBUSB_CALL libusb_hotplug_register_callback(libusb_context *ctx,
- libusb_hotplug_event events,
- libusb_hotplug_flag flags,
- int vendor_id, int product_id,
- int dev_class,
- libusb_hotplug_callback_fn cb_fn,
- void *user_data,
- libusb_hotplug_callback_handle *handle);
-
-/** \ingroup hotplug
- * Deregisters a hotplug callback.
- *
- * Deregister a callback from a libusb_context. This function is safe to call from within
- * a hotplug callback.
- *
- * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
- *
- * \param[in] ctx context this callback is registered with
- * \param[in] handle the handle of the callback to deregister
- */
-void LIBUSB_CALL libusb_hotplug_deregister_callback(libusb_context *ctx,
- libusb_hotplug_callback_handle handle);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/libusb-1.0/lib/mingw/libusb-1.0.a b/libusb-1.0/lib/mingw/libusb-1.0.a
deleted file mode 100644
index 7b0f6cf..0000000
--- a/libusb-1.0/lib/mingw/libusb-1.0.a
+++ /dev/null
Binary files differ