summaryrefslogtreecommitdiffstats
path: root/heimdall-frontend
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--heimdall-frontend/CMakeLists.txt16
-rw-r--r--heimdall-frontend/Qt4VSPropertySheet.props13
-rw-r--r--heimdall-frontend/description-pak1
-rw-r--r--heimdall-frontend/heimdall-frontend.pri16
-rw-r--r--heimdall-frontend/heimdall-frontend.pro109
-rw-r--r--heimdall-frontend/heimdall-frontend.vcxproj279
-rw-r--r--heimdall-frontend/heimdall-frontend.vcxproj.filters114
-rw-r--r--heimdall-frontend/include/zconf.h428
-rw-r--r--heimdall-frontend/include/zlib.h1613
-rw-r--r--heimdall-frontend/lib/win32/zlib.libbin239312 -> 0 bytes
-rw-r--r--heimdall-frontend/source/Alerts.cpp (renamed from heimdall-frontend/Source/Alerts.cpp)0
-rw-r--r--heimdall-frontend/source/Alerts.h (renamed from heimdall-frontend/Source/Alerts.h)0
-rw-r--r--heimdall-frontend/source/FirmwareInfo.cpp (renamed from heimdall-frontend/Source/FirmwareInfo.cpp)0
-rw-r--r--heimdall-frontend/source/FirmwareInfo.h (renamed from heimdall-frontend/Source/FirmwareInfo.h)0
-rw-r--r--heimdall-frontend/source/PackageData.cpp (renamed from heimdall-frontend/Source/PackageData.cpp)0
-rw-r--r--heimdall-frontend/source/PackageData.h (renamed from heimdall-frontend/Source/PackageData.h)0
-rw-r--r--heimdall-frontend/source/Packaging.cpp (renamed from heimdall-frontend/Source/Packaging.cpp)0
-rw-r--r--heimdall-frontend/source/Packaging.h (renamed from heimdall-frontend/Source/Packaging.h)0
-rw-r--r--heimdall-frontend/source/aboutform.cpp (renamed from heimdall-frontend/Source/aboutform.cpp)252
-rw-r--r--heimdall-frontend/source/aboutform.h (renamed from heimdall-frontend/Source/aboutform.h)116
-rw-r--r--heimdall-frontend/source/main.cpp (renamed from heimdall-frontend/Source/main.cpp)0
-rw-r--r--heimdall-frontend/source/mainwindow.cpp (renamed from heimdall-frontend/Source/mainwindow.cpp)2750
-rw-r--r--heimdall-frontend/source/mainwindow.h (renamed from heimdall-frontend/Source/mainwindow.h)366
23 files changed, 1750 insertions, 4323 deletions
diff --git a/heimdall-frontend/CMakeLists.txt b/heimdall-frontend/CMakeLists.txt
index a21db5a..76dac2e 100644
--- a/heimdall-frontend/CMakeLists.txt
+++ b/heimdall-frontend/CMakeLists.txt
@@ -3,7 +3,7 @@ cmake_minimum_required(VERSION 2.8.4)
project(heimdall-frontend)
set(LIBPIT_INCLUDE_DIRS
- ../libpit/Source)
+ ../libpit/source)
set(CMAKE_AUTOMOC ON)
set(CMAKE_INCLUDE_CURRENT_DIR ON) # moc files are generated in build (current) directory
@@ -17,13 +17,13 @@ set(CMAKE_EXE_LINKER_FLAGS "-static-libgcc -static-libstdc++ -static")
include_directories(${LIBPIT_INCLUDE_DIRS})
set(HEIMDALL_FRONTEND_SOURCE_FILES
- Source/aboutform.cpp
- Source/Alerts.cpp
- Source/FirmwareInfo.cpp
- Source/main.cpp
- Source/mainwindow.cpp
- Source/PackageData.cpp
- Source/Packaging.cpp)
+ source/aboutform.cpp
+ source/Alerts.cpp
+ source/FirmwareInfo.cpp
+ source/main.cpp
+ source/mainwindow.cpp
+ source/PackageData.cpp
+ source/Packaging.cpp)
qt5_wrap_ui(HEIMDALL_FRONTEND_FORMS
mainwindow.ui
diff --git a/heimdall-frontend/Qt4VSPropertySheet.props b/heimdall-frontend/Qt4VSPropertySheet.props
deleted file mode 100644
index fca888b..0000000
--- a/heimdall-frontend/Qt4VSPropertySheet.props
+++ /dev/null
@@ -1,13 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
- <ImportGroup Label="PropertySheets" />
- <PropertyGroup />
- <PropertyGroup />
- <ItemDefinitionGroup />
- <ItemGroup>
- <BuildMacro Include="QTDIR">
- <Value>$(QTDIR)</Value>
- <EnvironmentVariable>true</EnvironmentVariable>
- </BuildMacro>
- </ItemGroup>
-</Project> \ No newline at end of file
diff --git a/heimdall-frontend/description-pak b/heimdall-frontend/description-pak
deleted file mode 100644
index 7f45876..0000000
--- a/heimdall-frontend/description-pak
+++ /dev/null
@@ -1 +0,0 @@
-Heimdall Frontend is the official graphical user interface for the Heimdall tool suite.
diff --git a/heimdall-frontend/heimdall-frontend.pri b/heimdall-frontend/heimdall-frontend.pri
deleted file mode 100644
index 67ec8c4..0000000
--- a/heimdall-frontend/heimdall-frontend.pri
+++ /dev/null
@@ -1,16 +0,0 @@
-HEADERS += ./Source/aboutform.h \
- ./Source/Alerts.h \
- ./Source/FirmwareInfo.h \
- ./Source/mainwindow.h \
- ./Source/PackageData.h \
- ./Source/Packaging.h
-SOURCES += ./Source/aboutform.cpp \
- ./Source/Alerts.cpp \
- ./Source/FirmwareInfo.cpp \
- ./Source/main.cpp \
- ./Source/mainwindow.cpp \
- ./Source/PackageData.cpp \
- ./Source/Packaging.cpp
-FORMS += ./mainwindow.ui \
- ./aboutform.ui
-RESOURCES += mainwindow.qrc
diff --git a/heimdall-frontend/heimdall-frontend.pro b/heimdall-frontend/heimdall-frontend.pro
deleted file mode 100644
index 6b79e62..0000000
--- a/heimdall-frontend/heimdall-frontend.pro
+++ /dev/null
@@ -1,109 +0,0 @@
-# ----------------------------------------------------
-# This file is generated by the Qt Visual Studio Add-in.
-# ------------------------------------------------------
-
-TEMPLATE = app
-TARGET = heimdall-frontend
-
-isEmpty(OUTPUTDIR) {
- OUTPUTDIR = $$(OUTPUTDIR)
-}
-
-macx {
- message("")
-
- isEmpty(QT_FRAMEWORKS_DIR) {
- QT_FRAMEWORKS_DIR = $$(QT_FRAMEWORKS_DIR)
- }
-
- isEmpty(QT_FRAMEWORKS_DIR) {
- message("QT_FRAMEWORKS_DIR not specified, using default:")
- QT_FRAMEWORKS_DIR = /Library/Frameworks
- }
-
- message("QT_FRAMEWORKS_DIR = $$QT_FRAMEWORKS_DIR")
- message("")
-
- isEmpty(QMAKE_MACOSX_DEPLOYMENT_TARGET) {
- QMAKE_MACOSX_DEPLOYMENT_TARGET = $$(QMAKE_MACOSX_DEPLOYMENT_TARGET)
- }
-
- isEmpty(QMAKE_MACOSX_DEPLOYMENT_TARGET) {
- message("QMAKE_MACOSX_DEPLOYMENT_TARGET not specified, using default:")
- QMAKE_MACOSX_DEPLOYMENT_TARGET = 10.4
- }
-
- message("QMAKE_MACOSX_DEPLOYMENT_TARGET = $$QMAKE_MACOSX_DEPLOYMENT_TARGET")
- message("")
-
- isEmpty(QMAKE_MAC_SDK) {
- QMAKE_MAC_SDK = $$(QMAKE_MAC_SDK)
- }
-
- isEmpty(QMAKE_MAC_SDK) {
- message("QMAKE_MAC_SDK not specified, using default:")
- QMAKE_MAC_SDK = /Developer/SDKs/MacOSX10.7.sdk
- }
-
- message("QMAKE_MAC_SDK = $$QMAKE_MAC_SDK")
- message("")
-
- PRIVATE_FRAMEWORKS.files = $$QT_FRAMEWORKS_DIR/QtCore.framework \
- $$QT_FRAMEWORKS_DIR//QtGui.framework $$QT_FRAMEWORKS_DIR/QtXml.framework
- PRIVATE_FRAMEWORKS.path = Contents/Frameworks
-
- QMAKE_BUNDLE_DATA += PRIVATE_FRAMEWORKS
- LIBS += -L/usr/lib
-
- config += x86 x86_64 ppc
-
- QMAKE_CFLAGS_X86_64 = -m64 -mmacosx-version-min=$$QMAKE_MACOSX_DEPLOYMENT_TARGET
- QMAKE_CXXFLAGS_X86_64 = $$QMAKE_CFLAGS_X86_64
- QMAKE_LFLAGS_X86_64 = $$QMAKE_CFLAGS_X86_64
-
- isEmpty(OUTPUTDIR) {
- DESTDIR = /Applications
- } else {
- DESTDIR = $$OUTPUTDIR
- }
-
-} else {
- win32 { # It is recommended that Windows users compile via VS2010, but just in case...
- DESTDIR = ../Win32
-
- !isEmpty(OUTPUTDIR) {
- target.path = $$OUTPUTDIR
- INSTALLS += target
- }
- } else {
- DESTDIR = ../Linux
-
- isEmpty(OUTPUTDIR) {
- target.path = /usr/local/bin
- } else {
- target.path = $$OUTPUTDIR
- }
-
- INSTALLS += target
- }
-}
-
-QMAKE_CXXFLAGS += -std=c++0x
-
-unix:LIBS += -lz ../libpit/libpit-1.4.a
-win32:LIBS += ../Win32/Release/lib/libpit.lib
-
-QT += core gui xml
-CONFIG += release
-DEFINES += QT_LARGEFILE_SUPPORT
-INCLUDEPATH += ./GeneratedFiles \
- ./GeneratedFiles/Release \
- ../libpit/Source \
- .
-unix:INCLUDEPATH += /usr/include
-DEPENDPATH += .
-MOC_DIR += ./GeneratedFiles/release
-OBJECTS_DIR += release
-UI_DIR += ./GeneratedFiles
-RCC_DIR += ./GeneratedFiles
-include(heimdall-frontend.pri)
diff --git a/heimdall-frontend/heimdall-frontend.vcxproj b/heimdall-frontend/heimdall-frontend.vcxproj
deleted file mode 100644
index 96cd75d..0000000
--- a/heimdall-frontend/heimdall-frontend.vcxproj
+++ /dev/null
@@ -1,279 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
- <ItemGroup Label="ProjectConfigurations">
- <ProjectConfiguration Include="Debug|Win32">
- <Configuration>Debug</Configuration>
- <Platform>Win32</Platform>
- </ProjectConfiguration>
- <ProjectConfiguration Include="Release (Static)|Win32">
- <Configuration>Release (Static)</Configuration>
- <Platform>Win32</Platform>
- </ProjectConfiguration>
- <ProjectConfiguration Include="Release|Win32">
- <Configuration>Release</Configuration>
- <Platform>Win32</Platform>
- </ProjectConfiguration>
- </ItemGroup>
- <PropertyGroup Label="Globals">
- <ProjectGuid>{EAD352DF-7CDE-478C-8D70-B0E42A951DEF}</ProjectGuid>
- <Keyword>Qt4VSv1.0</Keyword>
- </PropertyGroup>
- <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
- <ConfigurationType>Application</ConfigurationType>
- <CharacterSet>Unicode</CharacterSet>
- <PlatformToolset>v110</PlatformToolset>
- </PropertyGroup>
- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
- <ConfigurationType>Application</ConfigurationType>
- <PlatformToolset>v110</PlatformToolset>
- <WholeProgramOptimization>true</WholeProgramOptimization>
- </PropertyGroup>
- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'" Label="Configuration">
- <ConfigurationType>Application</ConfigurationType>
- <PlatformToolset>v110</PlatformToolset>
- <WholeProgramOptimization>true</WholeProgramOptimization>
- </PropertyGroup>
- <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
- <ImportGroup Label="ExtensionSettings">
- </ImportGroup>
- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
- <Import Project="Qt4VSPropertySheet.props" />
- </ImportGroup>
- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
- <Import Project="Qt4VSPropertySheet.props" />
- </ImportGroup>
- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'" Label="PropertySheets">
- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
- <Import Project="Qt4VSPropertySheet.props" />
- </ImportGroup>
- <PropertyGroup Label="UserMacros" />
- <PropertyGroup>
- <_ProjectFileVersion>10.0.30319.1</_ProjectFileVersion>
- <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
- <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
- <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
- <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
- <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
- <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
- <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'" />
- <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
- <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'" />
- <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SolutionDir)$(Platform)\$(Configuration)\</OutDir>
- <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(SolutionDir)$(Platform)\$(Configuration)\</OutDir>
- <OutDir Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">$(SolutionDir)$(Platform)\$(Configuration)\</OutDir>
- <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(Configuration)\</IntDir>
- <IntDir Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">$(Configuration)\</IntDir>
- <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(Configuration)\</IntDir>
- <IncludePath Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(ProjectDir)include;$(SolutionDir)libpit\Source;$(IncludePath)</IncludePath>
- <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
- <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">false</LinkIncremental>
- <IncludePath Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(ProjectDir)include;$(SolutionDir)libpit\Source;$(IncludePath)</IncludePath>
- <IncludePath Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">$(ProjectDir)include;$(SolutionDir)libpit\Source;$(IncludePath)</IncludePath>
- <LibraryPath Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(ProjectDir)lib\win32;$(LibraryPath)</LibraryPath>
- <LibraryPath Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">$(ProjectDir)lib\win32;$(LibraryPath)</LibraryPath>
- <LibraryPath Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(ProjectDir)lib\win32;$(LibraryPath)</LibraryPath>
- <SourcePath Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(SourcePath)</SourcePath>
- </PropertyGroup>
- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
- <ClCompile>
- <PreprocessorDefinitions>UNICODE;WIN32;QT_LARGEFILE_SUPPORT;QT_CORE_LIB;QT_GUI_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
- <AdditionalIncludeDirectories>.\GeneratedFiles;$(QTDIR)\include;.\GeneratedFiles\$(ConfigurationName);$(QTDIR)\include\qtmain;$(QTDIR)\include\QtCore;$(QTDIR)\include\QtGui;$(QTDIR)\include\QtXml;..\libpit\Source;.\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
- <Optimization>Disabled</Optimization>
- <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
- <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
- <TreatWChar_tAsBuiltInType>false</TreatWChar_tAsBuiltInType>
- <WarningLevel>Level3</WarningLevel>
- <MinimalRebuild>true</MinimalRebuild>
- </ClCompile>
- <Link>
- <SubSystem>Windows</SubSystem>
- <OutputFile>$(OutDir)$(TargetName)$(TargetExt)</OutputFile>
- <AdditionalLibraryDirectories>$(QTDIR)\lib;$(SolutionDir)$(Platform)\$(Configuration)\lib\;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
- <GenerateDebugInformation>true</GenerateDebugInformation>
- <AdditionalDependencies>qtmaind.lib;QtCored4.lib;QtGuid4.lib;QtXmld4.lib;libpit.lib;%(AdditionalDependencies)</AdditionalDependencies>
- </Link>
- </ItemDefinitionGroup>
- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
- <ClCompile>
- <PreprocessorDefinitions>UNICODE;WIN32;QT_LARGEFILE_SUPPORT;QT_NO_DEBUG;NDEBUG;QT_CORE_LIB;QT_GUI_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
- <AdditionalIncludeDirectories>.\GeneratedFiles;$(QTDIR)\include;.\GeneratedFiles\$(ConfigurationName);$(QTDIR)\include\qtmain;$(QTDIR)\include\QtCore;$(QTDIR)\include\QtGui;$(QTDIR)\include\QtXml;..\libpit\Source;.\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
- <DebugInformationFormat>
- </DebugInformationFormat>
- <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
- <TreatWChar_tAsBuiltInType>false</TreatWChar_tAsBuiltInType>
- <PrecompiledHeaderFile>
- </PrecompiledHeaderFile>
- <PrecompiledHeaderOutputFile>
- </PrecompiledHeaderOutputFile>
- </ClCompile>
- <Link>
- <SubSystem>Windows</SubSystem>
- <OutputFile>$(OutDir)$(TargetName)$(TargetExt)</OutputFile>
- <AdditionalLibraryDirectories>$(QTDIR)\lib;$(SolutionDir)$(Platform)\$(Configuration)\lib\;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
- <GenerateDebugInformation>false</GenerateDebugInformation>
- <AdditionalDependencies>qtmain.lib;QtCore4.lib;QtGui4.lib;QtXml4.lib;libpit.lib;%(AdditionalDependencies)</AdditionalDependencies>
- </Link>
- </ItemDefinitionGroup>
- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">
- <ClCompile>
- <PreprocessorDefinitions>UNICODE;WIN32;QT_LARGEFILE_SUPPORT;QT_NO_DEBUG;NDEBUG;QT_CORE_LIB;QT_GUI_LIB;%(PreprocessorDefinitions)</PreprocessorDefinitions>
- <AdditionalIncludeDirectories>.\GeneratedFiles;$(QTDIR)\include;.\GeneratedFiles\$(ConfigurationName);$(QTDIR)\include\qtmain;$(QTDIR)\include\QtCore;$(QTDIR)\include\QtGui;$(QTDIR)\include\QtXml;..\libpit\Source;.\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
- <DebugInformationFormat>
- </DebugInformationFormat>
- <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
- <TreatWChar_tAsBuiltInType>false</TreatWChar_tAsBuiltInType>
- <PrecompiledHeaderFile>
- </PrecompiledHeaderFile>
- <PrecompiledHeaderOutputFile>
- </PrecompiledHeaderOutputFile>
- </ClCompile>
- <Link>
- <SubSystem>Windows</SubSystem>
- <OutputFile>$(OutDir)$(TargetName)$(TargetExt)</OutputFile>
- <AdditionalLibraryDirectories>$(QTDIR)\lib;$(SolutionDir)$(Platform)\$(Configuration)\lib\;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
- <GenerateDebugInformation>false</GenerateDebugInformation>
- <AdditionalDependencies>qtmain.lib;QtCore.lib;QtGui.lib;QtXml.lib;libpit.lib;imm32.lib;winmm.lib;Ws2_32.lib;%(AdditionalDependencies)</AdditionalDependencies>
- </Link>
- </ItemDefinitionGroup>
- <ItemGroup>
- <ClCompile Include="GeneratedFiles\Debug\moc_aboutform.cpp">
- <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">true</ExcludedFromBuild>
- <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">true</ExcludedFromBuild>
- </ClCompile>
- <ClCompile Include="GeneratedFiles\Debug\moc_mainwindow.cpp">
- <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">true</ExcludedFromBuild>
- <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">true</ExcludedFromBuild>
- </ClCompile>
- <ClCompile Include="GeneratedFiles\qrc_mainwindow.cpp">
- <PrecompiledHeader Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
- </PrecompiledHeader>
- <PrecompiledHeader Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
- </PrecompiledHeader>
- <PrecompiledHeader Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">
- </PrecompiledHeader>
- </ClCompile>
- <ClCompile Include="GeneratedFiles\Release\moc_aboutform.cpp">
- <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</ExcludedFromBuild>
- <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">true</ExcludedFromBuild>
- </ClCompile>
- <ClCompile Include="GeneratedFiles\Release\moc_mainwindow.cpp">
- <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</ExcludedFromBuild>
- <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">true</ExcludedFromBuild>
- </ClCompile>
- <ClCompile Include="GeneratedFiles\Release (Static)\moc_aboutform.cpp">
- <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</ExcludedFromBuild>
- <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">true</ExcludedFromBuild>
- </ClCompile>
- <ClCompile Include="GeneratedFiles\Release (Static)\moc_mainwindow.cpp">
- <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</ExcludedFromBuild>
- <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">true</ExcludedFromBuild>
- </ClCompile>
- <ClCompile Include="Source\aboutform.cpp" />
- <ClCompile Include="Source\Alerts.cpp" />
- <ClCompile Include="Source\FirmwareInfo.cpp" />
- <ClCompile Include="Source\main.cpp" />
- <ClCompile Include="Source\mainwindow.cpp" />
- <ClCompile Include="Source\PackageData.cpp" />
- <ClCompile Include="Source\Packaging.cpp" />
- </ItemGroup>
- <ItemGroup>
- <CustomBuild Include="mainwindow.ui">
- <FileType>Document</FileType>
- <AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(QTDIR)\bin\uic.exe;%(AdditionalInputs)</AdditionalInputs>
- <Message Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">Uic%27ing %(Identity)...</Message>
- <Outputs Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">.\GeneratedFiles\ui_%(Filename).h;%(Outputs)</Outputs>
- <Command Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">"$(QTDIR)\bin\uic.exe" -o ".\GeneratedFiles\ui_%(Filename).h" "%(FullPath)"</Command>
- <AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(QTDIR)\bin\uic.exe;%(AdditionalInputs)</AdditionalInputs>
- <AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">$(QTDIR)\bin\uic.exe;%(AdditionalInputs)</AdditionalInputs>
- <Message Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">Uic%27ing %(Identity)...</Message>
- <Message Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">Uic%27ing %(Identity)...</Message>
- <Outputs Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">.\GeneratedFiles\ui_%(Filename).h;%(Outputs)</Outputs>
- <Outputs Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">.\GeneratedFiles\ui_%(Filename).h;%(Outputs)</Outputs>
- <Command Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">"$(QTDIR)\bin\uic.exe" -o ".\GeneratedFiles\ui_%(Filename).h" "%(FullPath)"</Command>
- <Command Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">"$(QTDIR)\bin\uic.exe" -o ".\GeneratedFiles\ui_%(Filename).h" "%(FullPath)"</Command>
- </CustomBuild>
- </ItemGroup>
- <ItemGroup>
- <ClInclude Include="GeneratedFiles\ui_aboutform.h" />
- <ClInclude Include="GeneratedFiles\ui_mainwindow.h" />
- <CustomBuild Include="Source\aboutform.h">
- <AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(QTDIR)\bin\moc.exe;%(FullPath)</AdditionalInputs>
- <Message Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">Moc%27ing %(Identity)...</Message>
- <Outputs Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">.\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp</Outputs>
- <Command Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">"$(QTDIR)\bin\moc.exe" "%(FullPath)" -o ".\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp" "-I$(QTDIR)\include" "-I$(QTDIR)\include\QtCore" "-I$(QTDIR)\include\QtGui" "-I$(QTDIR)\include\qtmain" "-I$(QTDIR)\include\QtXml" "-I." "-I.\..\libpit\Source" "-I.\GeneratedFiles" "-I.\GeneratedFiles\$(ConfigurationName)\." -D_UNICODE -DQT_CORE_LIB -DQT_GUI_LIB -DQT_LARGEFILE_SUPPORT -DUNICODE -DWIN32</Command>
- <AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(QTDIR)\bin\moc.exe;%(FullPath)</AdditionalInputs>
- <AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">$(QTDIR)\bin\moc.exe;%(FullPath)</AdditionalInputs>
- <Message Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">Moc%27ing %(Identity)...</Message>
- <Message Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">Moc%27ing %(Identity)...</Message>
- <Outputs Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">.\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp</Outputs>
- <Outputs Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">.\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp</Outputs>
- <Command Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">"$(QTDIR)\bin\moc.exe" "%(FullPath)" -o ".\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp" "-I$(QTDIR)\include" "-I$(QTDIR)\include\QtCore" "-I$(QTDIR)\include\QtGui" "-I$(QTDIR)\include\qtmain" "-I$(QTDIR)\include\QtXml" "-I." "-I.\..\libpit\Source" "-I.\GeneratedFiles" "-I.\GeneratedFiles\$(ConfigurationName)\." -DNDEBUG -DQT_CORE_LIB -DQT_GUI_LIB -DQT_LARGEFILE_SUPPORT -DQT_NO_DEBUG -DUNICODE -DWIN32</Command>
- <Command Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">"$(QTDIR)\bin\moc.exe" "%(FullPath)" -o ".\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp" "-I$(QTDIR)\include" "-I$(QTDIR)\include\QtCore" "-I$(QTDIR)\include\QtGui" "-I$(QTDIR)\include\qtmain" "-I$(QTDIR)\include\QtXml" "-I." "-I.\..\libpit\Source" "-I.\GeneratedFiles" "-I.\GeneratedFiles\$(ConfigurationName)\." -DNDEBUG -DQT_CORE_LIB -DQT_GUI_LIB -DQT_LARGEFILE_SUPPORT -DQT_NO_DEBUG -DUNICODE -DWIN32</Command>
- </CustomBuild>
- <ClInclude Include="Source\Alerts.h" />
- <ClInclude Include="Source\FirmwareInfo.h" />
- <ClInclude Include="Source\PackageData.h" />
- <ClInclude Include="Source\Packaging.h" />
- <CustomBuild Include="Source\mainwindow.h">
- <AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(QTDIR)\bin\moc.exe;%(FullPath)</AdditionalInputs>
- <Message Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">Moc%27ing %(Identity)...</Message>
- <Outputs Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">.\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp</Outputs>
- <Command Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">"$(QTDIR)\bin\moc.exe" -DUNICODE -DWIN32 -DQT_LARGEFILE_SUPPORT -DQT_CORE_LIB -DQT_GUI_LIB -D_UNICODE "-I." "-I.\GeneratedFiles" "-I$(QTDIR)\include" "-I.\GeneratedFiles\$(ConfigurationName)\." "-I$(QTDIR)\include\qtmain" "-I$(QTDIR)\include\QtCore" "-I$(QTDIR)\include\QtGui" "-I$(QTDIR)\include\QtXml" "-I.\..\libpit\Source" "-I." "-I." "-I." "-I." "-I." "-I." "Source\mainwindow.h" -o ".\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp"</Command>
- <AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(QTDIR)\bin\moc.exe;%(FullPath)</AdditionalInputs>
- <AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">$(QTDIR)\bin\moc.exe;%(FullPath)</AdditionalInputs>
- <Message Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">Moc%27ing %(Identity)...</Message>
- <Message Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">Moc%27ing %(Identity)...</Message>
- <Outputs Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">.\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp</Outputs>
- <Outputs Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">.\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp</Outputs>
- <Command Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">"$(QTDIR)\bin\moc.exe" -DUNICODE -DWIN32 -DQT_LARGEFILE_SUPPORT -DQT_NO_DEBUG -DNDEBUG -DQT_CORE_LIB -DQT_GUI_LIB "-I." "-I.\GeneratedFiles" "-I$(QTDIR)\include" "-I.\GeneratedFiles\$(ConfigurationName)\." "-I$(QTDIR)\include\qtmain" "-I$(QTDIR)\include\QtCore" "-I$(QTDIR)\include\QtGui" "-I$(QTDIR)\include\QtXml" "-I.\..\libpit\Source" "-I." "-I." "-I." "-I." "-I." "Source\mainwindow.h" -o ".\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp"</Command>
- <Command Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">"$(QTDIR)\bin\moc.exe" -DUNICODE -DWIN32 -DQT_LARGEFILE_SUPPORT -DQT_NO_DEBUG -DNDEBUG -DQT_CORE_LIB -DQT_GUI_LIB "-I." "-I.\GeneratedFiles" "-I$(QTDIR)\include" "-I.\GeneratedFiles\$(ConfigurationName)\." "-I$(QTDIR)\include\qtmain" "-I$(QTDIR)\include\QtCore" "-I$(QTDIR)\include\QtGui" "-I$(QTDIR)\include\QtXml" "-I.\..\libpit\Source" "-I." "-I." "-I." "-I." "-I." "Source\mainwindow.h" -o ".\GeneratedFiles\$(ConfigurationName)\moc_%(Filename).cpp"</Command>
- </CustomBuild>
- </ItemGroup>
- <ItemGroup>
- <CustomBuild Include="mainwindow.qrc">
- <FileType>Document</FileType>
- <AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">%(FullPath);%(AdditionalInputs)</AdditionalInputs>
- <Message Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">Rcc%27ing %(Identity)...</Message>
- <Outputs Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">.\GeneratedFiles\qrc_%(Filename).cpp;%(Outputs)</Outputs>
- <Command Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">"$(QTDIR)\bin\rcc.exe" -name "%(Filename)" -no-compress "%(FullPath)" -o .\GeneratedFiles\qrc_%(Filename).cpp</Command>
- <AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">%(FullPath);%(AdditionalInputs)</AdditionalInputs>
- <AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">%(FullPath);%(AdditionalInputs)</AdditionalInputs>
- <Message Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">Rcc%27ing %(Identity)...</Message>
- <Message Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">Rcc%27ing %(Identity)...</Message>
- <Outputs Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">.\GeneratedFiles\qrc_%(Filename).cpp;%(Outputs)</Outputs>
- <Outputs Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">.\GeneratedFiles\qrc_%(Filename).cpp;%(Outputs)</Outputs>
- <Command Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">"$(QTDIR)\bin\rcc.exe" -name "%(Filename)" -no-compress "%(FullPath)" -o .\GeneratedFiles\qrc_%(Filename).cpp</Command>
- <Command Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">"$(QTDIR)\bin\rcc.exe" -name "%(Filename)" -no-compress "%(FullPath)" -o .\GeneratedFiles\qrc_%(Filename).cpp</Command>
- <SubType>Designer</SubType>
- </CustomBuild>
- </ItemGroup>
- <ItemGroup>
- <CustomBuild Include="aboutform.ui">
- <FileType>Document</FileType>
- <AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">$(QTDIR)\bin\uic.exe;%(AdditionalInputs)</AdditionalInputs>
- <Message Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">Uic%27ing %(Identity)...</Message>
- <Outputs Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">.\GeneratedFiles\ui_%(Filename).h;%(Outputs)</Outputs>
- <Command Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">"$(QTDIR)\bin\uic.exe" -o ".\GeneratedFiles\ui_%(Filename).h" "%(FullPath)"</Command>
- <AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">$(QTDIR)\bin\uic.exe;%(AdditionalInputs)</AdditionalInputs>
- <AdditionalInputs Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">$(QTDIR)\bin\uic.exe;%(AdditionalInputs)</AdditionalInputs>
- <Message Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">Uic%27ing %(Identity)...</Message>
- <Message Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">Uic%27ing %(Identity)...</Message>
- <Outputs Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">.\GeneratedFiles\ui_%(Filename).h;%(Outputs)</Outputs>
- <Outputs Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">.\GeneratedFiles\ui_%(Filename).h;%(Outputs)</Outputs>
- <Command Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">"$(QTDIR)\bin\uic.exe" -o ".\GeneratedFiles\ui_%(Filename).h" "%(FullPath)"</Command>
- <Command Condition="'$(Configuration)|$(Platform)'=='Release (Static)|Win32'">"$(QTDIR)\bin\uic.exe" -o ".\GeneratedFiles\ui_%(Filename).h" "%(FullPath)"</Command>
- <SubType>Designer</SubType>
- </CustomBuild>
- </ItemGroup>
- <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
- <ImportGroup Label="ExtensionTargets">
- </ImportGroup>
- <ProjectExtensions>
- <VisualStudio>
- <UserProperties UicDir=".\GeneratedFiles" MocDir=".\GeneratedFiles\$(ConfigurationName)" MocOptions="" RccDir=".\GeneratedFiles" lupdateOnBuild="0" QtVersion_x0020_Win32="qt" />
- </VisualStudio>
- </ProjectExtensions>
-</Project> \ No newline at end of file
diff --git a/heimdall-frontend/heimdall-frontend.vcxproj.filters b/heimdall-frontend/heimdall-frontend.vcxproj.filters
deleted file mode 100644
index 28902dd..0000000
--- a/heimdall-frontend/heimdall-frontend.vcxproj.filters
+++ /dev/null
@@ -1,114 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
- <ItemGroup>
- <Filter Include="Form Files">
- <UniqueIdentifier>{99349809-55BA-4b9d-BF79-8FDBB0286EB3}</UniqueIdentifier>
- <Extensions>ui</Extensions>
- </Filter>
- <Filter Include="Resource Files">
- <UniqueIdentifier>{D9D6E242-F8AF-46E4-B9FD-80ECBC20BA3E}</UniqueIdentifier>
- <Extensions>qrc;*</Extensions>
- <ParseFiles>false</ParseFiles>
- </Filter>
- <Filter Include="Generated Files">
- <UniqueIdentifier>{71ED8ED8-ACB9-4CE9-BBE1-E00B30144E11}</UniqueIdentifier>
- <Extensions>moc;h;cpp</Extensions>
- <SourceControlFiles>False</SourceControlFiles>
- </Filter>
- <Filter Include="Generated Files\Debug">
- <UniqueIdentifier>{ead127e5-64ec-4f27-8f35-5fb8f8b0b46e}</UniqueIdentifier>
- <Extensions>cpp;moc</Extensions>
- <SourceControlFiles>False</SourceControlFiles>
- </Filter>
- <Filter Include="Generated Files\Release">
- <UniqueIdentifier>{2a437972-0e31-44d0-be90-ea5d62a68ff5}</UniqueIdentifier>
- <Extensions>cpp;moc</Extensions>
- <SourceControlFiles>False</SourceControlFiles>
- </Filter>
- <Filter Include="Source">
- <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
- <Extensions>cpp;cxx;c;def</Extensions>
- </Filter>
- </ItemGroup>
- <ItemGroup>
- <ClCompile Include="GeneratedFiles\qrc_mainwindow.cpp">
- <Filter>Generated Files</Filter>
- </ClCompile>
- <ClCompile Include="Source\main.cpp">
- <Filter>Source</Filter>
- </ClCompile>
- <ClCompile Include="Source\mainwindow.cpp">
- <Filter>Source</Filter>
- </ClCompile>
- <ClCompile Include="GeneratedFiles\Debug\moc_mainwindow.cpp">
- <Filter>Generated Files\Debug</Filter>
- </ClCompile>
- <ClCompile Include="GeneratedFiles\Release\moc_mainwindow.cpp">
- <Filter>Generated Files\Release</Filter>
- </ClCompile>
- <ClCompile Include="Source\aboutform.cpp">
- <Filter>Source</Filter>
- </ClCompile>
- <ClCompile Include="Source\Packaging.cpp">
- <Filter>Source</Filter>
- </ClCompile>
- <ClCompile Include="Source\PackageData.cpp">
- <Filter>Source</Filter>
- </ClCompile>
- <ClCompile Include="Source\FirmwareInfo.cpp">
- <Filter>Source</Filter>
- </ClCompile>
- <ClCompile Include="Source\Alerts.cpp">
- <Filter>Source</Filter>
- </ClCompile>
- <ClCompile Include="GeneratedFiles\Debug\moc_aboutform.cpp">
- <Filter>Generated Files\Debug</Filter>
- </ClCompile>
- <ClCompile Include="GeneratedFiles\Release\moc_aboutform.cpp">
- <Filter>Generated Files\Release</Filter>
- </ClCompile>
- <ClCompile Include="GeneratedFiles\Release (Static)\moc_aboutform.cpp">
- <Filter>Generated Files\Debug</Filter>
- </ClCompile>
- <ClCompile Include="GeneratedFiles\Release (Static)\moc_mainwindow.cpp">
- <Filter>Generated Files\Debug</Filter>
- </ClCompile>
- </ItemGroup>
- <ItemGroup>
- <CustomBuild Include="mainwindow.ui">
- <Filter>Form Files</Filter>
- </CustomBuild>
- <CustomBuild Include="mainwindow.qrc">
- <Filter>Resource Files</Filter>
- </CustomBuild>
- <CustomBuild Include="Source\mainwindow.h">
- <Filter>Source</Filter>
- </CustomBuild>
- <CustomBuild Include="AboutForm.ui">
- <Filter>Form Files</Filter>
- </CustomBuild>
- <CustomBuild Include="Source\aboutform.h">
- <Filter>Source</Filter>
- </CustomBuild>
- </ItemGroup>
- <ItemGroup>
- <ClInclude Include="GeneratedFiles\ui_mainwindow.h">
- <Filter>Generated Files</Filter>
- </ClInclude>
- <ClInclude Include="GeneratedFiles\ui_AboutForm.h">
- <Filter>Generated Files</Filter>
- </ClInclude>
- <ClInclude Include="Source\Packaging.h">
- <Filter>Source</Filter>
- </ClInclude>
- <ClInclude Include="Source\PackageData.h">
- <Filter>Source</Filter>
- </ClInclude>
- <ClInclude Include="Source\FirmwareInfo.h">
- <Filter>Source</Filter>
- </ClInclude>
- <ClInclude Include="Source\Alerts.h">
- <Filter>Source</Filter>
- </ClInclude>
- </ItemGroup>
-</Project> \ No newline at end of file
diff --git a/heimdall-frontend/include/zconf.h b/heimdall-frontend/include/zconf.h
deleted file mode 100644
index 02ce56c..0000000
--- a/heimdall-frontend/include/zconf.h
+++ /dev/null
@@ -1,428 +0,0 @@
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2010 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#ifndef ZCONF_H
-#define ZCONF_H
-
-/*
- * If you *really* need a unique prefix for all types and library functions,
- * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
- * Even better than compiling with -DZ_PREFIX would be to use configure to set
- * this permanently in zconf.h using "./configure --zprefix".
- */
-#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */
-
-/* all linked symbols */
-# define _dist_code z__dist_code
-# define _length_code z__length_code
-# define _tr_align z__tr_align
-# define _tr_flush_block z__tr_flush_block
-# define _tr_init z__tr_init
-# define _tr_stored_block z__tr_stored_block
-# define _tr_tally z__tr_tally
-# define adler32 z_adler32
-# define adler32_combine z_adler32_combine
-# define adler32_combine64 z_adler32_combine64
-# define compress z_compress
-# define compress2 z_compress2
-# define compressBound z_compressBound
-# define crc32 z_crc32
-# define crc32_combine z_crc32_combine
-# define crc32_combine64 z_crc32_combine64
-# define deflate z_deflate
-# define deflateBound z_deflateBound
-# define deflateCopy z_deflateCopy
-# define deflateEnd z_deflateEnd
-# define deflateInit2_ z_deflateInit2_
-# define deflateInit_ z_deflateInit_
-# define deflateParams z_deflateParams
-# define deflatePrime z_deflatePrime
-# define deflateReset z_deflateReset
-# define deflateSetDictionary z_deflateSetDictionary
-# define deflateSetHeader z_deflateSetHeader
-# define deflateTune z_deflateTune
-# define deflate_copyright z_deflate_copyright
-# define get_crc_table z_get_crc_table
-# define gz_error z_gz_error
-# define gz_intmax z_gz_intmax
-# define gz_strwinerror z_gz_strwinerror
-# define gzbuffer z_gzbuffer
-# define gzclearerr z_gzclearerr
-# define gzclose z_gzclose
-# define gzclose_r z_gzclose_r
-# define gzclose_w z_gzclose_w
-# define gzdirect z_gzdirect
-# define gzdopen z_gzdopen
-# define gzeof z_gzeof
-# define gzerror z_gzerror
-# define gzflush z_gzflush
-# define gzgetc z_gzgetc
-# define gzgets z_gzgets
-# define gzoffset z_gzoffset
-# define gzoffset64 z_gzoffset64
-# define gzopen z_gzopen
-# define gzopen64 z_gzopen64
-# define gzprintf z_gzprintf
-# define gzputc z_gzputc
-# define gzputs z_gzputs
-# define gzread z_gzread
-# define gzrewind z_gzrewind
-# define gzseek z_gzseek
-# define gzseek64 z_gzseek64
-# define gzsetparams z_gzsetparams
-# define gztell z_gztell
-# define gztell64 z_gztell64
-# define gzungetc z_gzungetc
-# define gzwrite z_gzwrite
-# define inflate z_inflate
-# define inflateBack z_inflateBack
-# define inflateBackEnd z_inflateBackEnd
-# define inflateBackInit_ z_inflateBackInit_
-# define inflateCopy z_inflateCopy
-# define inflateEnd z_inflateEnd
-# define inflateGetHeader z_inflateGetHeader
-# define inflateInit2_ z_inflateInit2_
-# define inflateInit_ z_inflateInit_
-# define inflateMark z_inflateMark
-# define inflatePrime z_inflatePrime
-# define inflateReset z_inflateReset
-# define inflateReset2 z_inflateReset2
-# define inflateSetDictionary z_inflateSetDictionary
-# define inflateSync z_inflateSync
-# define inflateSyncPoint z_inflateSyncPoint
-# define inflateUndermine z_inflateUndermine
-# define inflate_copyright z_inflate_copyright
-# define inflate_fast z_inflate_fast
-# define inflate_table z_inflate_table
-# define uncompress z_uncompress
-# define zError z_zError
-# define zcalloc z_zcalloc
-# define zcfree z_zcfree
-# define zlibCompileFlags z_zlibCompileFlags
-# define zlibVersion z_zlibVersion
-
-/* all zlib typedefs in zlib.h and zconf.h */
-# define Byte z_Byte
-# define Bytef z_Bytef
-# define alloc_func z_alloc_func
-# define charf z_charf
-# define free_func z_free_func
-# define gzFile z_gzFile
-# define gz_header z_gz_header
-# define gz_headerp z_gz_headerp
-# define in_func z_in_func
-# define intf z_intf
-# define out_func z_out_func
-# define uInt z_uInt
-# define uIntf z_uIntf
-# define uLong z_uLong
-# define uLongf z_uLongf
-# define voidp z_voidp
-# define voidpc z_voidpc
-# define voidpf z_voidpf
-
-/* all zlib structs in zlib.h and zconf.h */
-# define gz_header_s z_gz_header_s
-# define internal_state z_internal_state
-
-#endif
-
-#if defined(__MSDOS__) && !defined(MSDOS)
-# define MSDOS
-#endif
-#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
-# define OS2
-#endif
-#if defined(_WINDOWS) && !defined(WINDOWS)
-# define WINDOWS
-#endif
-#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
-# ifndef WIN32
-# define WIN32
-# endif
-#endif
-#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
-# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
-# ifndef SYS16BIT
-# define SYS16BIT
-# endif
-# endif
-#endif
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- */
-#ifdef SYS16BIT
-# define MAXSEG_64K
-#endif
-#ifdef MSDOS
-# define UNALIGNED_OK
-#endif
-
-#ifdef __STDC_VERSION__
-# ifndef STDC
-# define STDC
-# endif
-# if __STDC_VERSION__ >= 199901L
-# ifndef STDC99
-# define STDC99
-# endif
-# endif
-#endif
-#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
-# define STDC
-#endif
-#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
-# define STDC
-#endif
-#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
-# define STDC
-#endif
-#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
-# define STDC
-#endif
-
-#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */
-# define STDC
-#endif
-
-#ifndef STDC
-# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-# define const /* note: need a more gentle solution here */
-# endif
-#endif
-
-/* Some Mac compilers merge all .h files incorrectly: */
-#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
-# define NO_DUMMY_DECL
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-# ifdef MAXSEG_64K
-# define MAX_MEM_LEVEL 8
-# else
-# define MAX_MEM_LEVEL 9
-# endif
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2.
- * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
- * created by gzip. (Files created by minigzip can still be extracted by
- * gzip.)
- */
-#ifndef MAX_WBITS
-# define MAX_WBITS 15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
- (1 << (windowBits+2)) + (1 << (memLevel+9))
- that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
- make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
- The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
- /* Type declarations */
-
-#ifndef OF /* function prototypes */
-# ifdef STDC
-# define OF(args) args
-# else
-# define OF(args) ()
-# endif
-#endif
-
-/* The following definitions for FAR are needed only for MSDOS mixed
- * model programming (small or medium model with some far allocations).
- * This was tested only with MSC; for other MSDOS compilers you may have
- * to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
- * just define FAR to be empty.
- */
-#ifdef SYS16BIT
-# if defined(M_I86SM) || defined(M_I86MM)
- /* MSC small or medium model */
-# define SMALL_MEDIUM
-# ifdef _MSC_VER
-# define FAR _far
-# else
-# define FAR far
-# endif
-# endif
-# if (defined(__SMALL__) || defined(__MEDIUM__))
- /* Turbo C small or medium model */
-# define SMALL_MEDIUM
-# ifdef __BORLANDC__
-# define FAR _far
-# else
-# define FAR far
-# endif
-# endif
-#endif
-
-#if defined(WINDOWS) || defined(WIN32)
- /* If building or using zlib as a DLL, define ZLIB_DLL.
- * This is not mandatory, but it offers a little performance increase.
- */
-# ifdef ZLIB_DLL
-# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
-# ifdef ZLIB_INTERNAL
-# define ZEXTERN extern __declspec(dllexport)
-# else
-# define ZEXTERN extern __declspec(dllimport)
-# endif
-# endif
-# endif /* ZLIB_DLL */
- /* If building or using zlib with the WINAPI/WINAPIV calling convention,
- * define ZLIB_WINAPI.
- * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
- */
-# ifdef ZLIB_WINAPI
-# ifdef FAR
-# undef FAR
-# endif
-# include <windows.h>
- /* No need for _export, use ZLIB.DEF instead. */
- /* For complete Windows compatibility, use WINAPI, not __stdcall. */
-# define ZEXPORT WINAPI
-# ifdef WIN32
-# define ZEXPORTVA WINAPIV
-# else
-# define ZEXPORTVA FAR CDECL
-# endif
-# endif
-#endif
-
-#if defined (__BEOS__)
-# ifdef ZLIB_DLL
-# ifdef ZLIB_INTERNAL
-# define ZEXPORT __declspec(dllexport)
-# define ZEXPORTVA __declspec(dllexport)
-# else
-# define ZEXPORT __declspec(dllimport)
-# define ZEXPORTVA __declspec(dllimport)
-# endif
-# endif
-#endif
-
-#ifndef ZEXTERN
-# define ZEXTERN extern
-#endif
-#ifndef ZEXPORT
-# define ZEXPORT
-#endif
-#ifndef ZEXPORTVA
-# define ZEXPORTVA
-#endif
-
-#ifndef FAR
-# define FAR
-#endif
-
-#if !defined(__MACTYPES__)
-typedef unsigned char Byte; /* 8 bits */
-#endif
-typedef unsigned int uInt; /* 16 bits or more */
-typedef unsigned long uLong; /* 32 bits or more */
-
-#ifdef SMALL_MEDIUM
- /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
-# define Bytef Byte FAR
-#else
- typedef Byte FAR Bytef;
-#endif
-typedef char FAR charf;
-typedef int FAR intf;
-typedef uInt FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
- typedef void const *voidpc;
- typedef void FAR *voidpf;
- typedef void *voidp;
-#else
- typedef Byte const *voidpc;
- typedef Byte FAR *voidpf;
- typedef Byte *voidp;
-#endif
-
-#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */
-# define Z_HAVE_UNISTD_H
-#endif
-
-#ifdef STDC
-# include <sys/types.h> /* for off_t */
-#endif
-
-/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
- * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
- * though the former does not conform to the LFS document), but considering
- * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
- * equivalently requesting no 64-bit operations
- */
-#if -_LARGEFILE64_SOURCE - -1 == 1
-# undef _LARGEFILE64_SOURCE
-#endif
-
-#if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
-# include <unistd.h> /* for SEEK_* and off_t */
-# ifdef VMS
-# include <unixio.h> /* for off_t */
-# endif
-# ifndef z_off_t
-# define z_off_t off_t
-# endif
-#endif
-
-#ifndef SEEK_SET
-# define SEEK_SET 0 /* Seek from beginning of file. */
-# define SEEK_CUR 1 /* Seek from current position. */
-# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
-#endif
-
-#ifndef z_off_t
-# define z_off_t long
-#endif
-
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
-# define z_off64_t off64_t
-#else
-# define z_off64_t z_off_t
-#endif
-
-#if defined(__OS400__)
-# define NO_vsnprintf
-#endif
-
-#if defined(__MVS__)
-# define NO_vsnprintf
-#endif
-
-/* MVS linker does not support external names larger than 8 bytes */
-#if defined(__MVS__)
- #pragma map(deflateInit_,"DEIN")
- #pragma map(deflateInit2_,"DEIN2")
- #pragma map(deflateEnd,"DEEND")
- #pragma map(deflateBound,"DEBND")
- #pragma map(inflateInit_,"ININ")
- #pragma map(inflateInit2_,"ININ2")
- #pragma map(inflateEnd,"INEND")
- #pragma map(inflateSync,"INSY")
- #pragma map(inflateSetDictionary,"INSEDI")
- #pragma map(compressBound,"CMBND")
- #pragma map(inflate_table,"INTABL")
- #pragma map(inflate_fast,"INFA")
- #pragma map(inflate_copyright,"INCOPY")
-#endif
-
-#endif /* ZCONF_H */
diff --git a/heimdall-frontend/include/zlib.h b/heimdall-frontend/include/zlib.h
deleted file mode 100644
index bfbba83..0000000
--- a/heimdall-frontend/include/zlib.h
+++ /dev/null
@@ -1,1613 +0,0 @@
-/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 1.2.5, April 19th, 2010
-
- Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
-
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
-
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
-
- 1. The origin of this software must not be misrepresented; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- 2. Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- 3. This notice may not be removed or altered from any source distribution.
-
- Jean-loup Gailly Mark Adler
- jloup@gzip.org madler@alumni.caltech.edu
-
-
- The data format used by the zlib library is described by RFCs (Request for
- Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
- (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
-*/
-
-#ifndef ZLIB_H
-#define ZLIB_H
-
-#include "zconf.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define ZLIB_VERSION "1.2.5"
-#define ZLIB_VERNUM 0x1250
-#define ZLIB_VER_MAJOR 1
-#define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 5
-#define ZLIB_VER_SUBREVISION 0
-
-/*
- The 'zlib' compression library provides in-memory compression and
- decompression functions, including integrity checks of the uncompressed data.
- This version of the library supports only one compression method (deflation)
- but other algorithms will be added later and will have the same stream
- interface.
-
- Compression can be done in a single step if the buffers are large enough,
- or can be done by repeated calls of the compression function. In the latter
- case, the application must provide more input and/or consume the output
- (providing more output space) before each call.
-
- The compressed data format used by default by the in-memory functions is
- the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
- around a deflate stream, which is itself documented in RFC 1951.
-
- The library also supports reading and writing files in gzip (.gz) format
- with an interface similar to that of stdio using the functions that start
- with "gz". The gzip format is different from the zlib format. gzip is a
- gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
-
- This library can optionally read and write gzip streams in memory as well.
-
- The zlib format was designed to be compact and fast for use in memory
- and on communications channels. The gzip format was designed for single-
- file compression on file systems, has a larger header than zlib to maintain
- directory information, and uses a different, slower check method than zlib.
-
- The library does not install any signal handler. The decoder checks
- the consistency of the compressed data, so the library should never crash
- even in case of corrupted input.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void (*free_func) OF((voidpf opaque, voidpf address));
-
-struct internal_state;
-
-typedef struct z_stream_s {
- Bytef *next_in; /* next input byte */
- uInt avail_in; /* number of bytes available at next_in */
- uLong total_in; /* total nb of input bytes read so far */
-
- Bytef *next_out; /* next output byte should be put there */
- uInt avail_out; /* remaining free space at next_out */
- uLong total_out; /* total nb of bytes output so far */
-
- char *msg; /* last error message, NULL if no error */
- struct internal_state FAR *state; /* not visible by applications */
-
- alloc_func zalloc; /* used to allocate the internal state */
- free_func zfree; /* used to free the internal state */
- voidpf opaque; /* private data object passed to zalloc and zfree */
-
- int data_type; /* best guess about the data type: binary or text */
- uLong adler; /* adler32 value of the uncompressed data */
- uLong reserved; /* reserved for future use */
-} z_stream;
-
-typedef z_stream FAR *z_streamp;
-
-/*
- gzip header information passed to and from zlib routines. See RFC 1952
- for more details on the meanings of these fields.
-*/
-typedef struct gz_header_s {
- int text; /* true if compressed data believed to be text */
- uLong time; /* modification time */
- int xflags; /* extra flags (not used when writing a gzip file) */
- int os; /* operating system */
- Bytef *extra; /* pointer to extra field or Z_NULL if none */
- uInt extra_len; /* extra field length (valid if extra != Z_NULL) */
- uInt extra_max; /* space at extra (only when reading header) */
- Bytef *name; /* pointer to zero-terminated file name or Z_NULL */
- uInt name_max; /* space at name (only when reading header) */
- Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */
- uInt comm_max; /* space at comment (only when reading header) */
- int hcrc; /* true if there was or will be a header crc */
- int done; /* true when done reading gzip header (not used
- when writing a gzip file) */
-} gz_header;
-
-typedef gz_header FAR *gz_headerp;
-
-/*
- The application must update next_in and avail_in when avail_in has dropped
- to zero. It must update next_out and avail_out when avail_out has dropped
- to zero. The application must initialize zalloc, zfree and opaque before
- calling the init function. All other fields are set by the compression
- library and must not be updated by the application.
-
- The opaque value provided by the application will be passed as the first
- parameter for calls of zalloc and zfree. This can be useful for custom
- memory management. The compression library attaches no meaning to the
- opaque value.
-
- zalloc must return Z_NULL if there is not enough memory for the object.
- If zlib is used in a multi-threaded application, zalloc and zfree must be
- thread safe.
-
- On 16-bit systems, the functions zalloc and zfree must be able to allocate
- exactly 65536 bytes, but will not be required to allocate more than this if
- the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers
- returned by zalloc for objects of exactly 65536 bytes *must* have their
- offset normalized to zero. The default allocation function provided by this
- library ensures this (see zutil.c). To reduce memory requirements and avoid
- any allocation of 64K objects, at the expense of compression ratio, compile
- the library with -DMAX_WBITS=14 (see zconf.h).
-
- The fields total_in and total_out can be used for statistics or progress
- reports. After compression, total_in holds the total size of the
- uncompressed data and may be saved for use in the decompressor (particularly
- if the decompressor wants to decompress everything in a single step).
-*/
-
- /* constants */
-
-#define Z_NO_FLUSH 0
-#define Z_PARTIAL_FLUSH 1
-#define Z_SYNC_FLUSH 2
-#define Z_FULL_FLUSH 3
-#define Z_FINISH 4
-#define Z_BLOCK 5
-#define Z_TREES 6
-/* Allowed flush values; see deflate() and inflate() below for details */
-
-#define Z_OK 0
-#define Z_STREAM_END 1
-#define Z_NEED_DICT 2
-#define Z_ERRNO (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR (-3)
-#define Z_MEM_ERROR (-4)
-#define Z_BUF_ERROR (-5)
-#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative values
- * are errors, positive values are used for special but normal events.
- */
-
-#define Z_NO_COMPRESSION 0
-#define Z_BEST_SPEED 1
-#define Z_BEST_COMPRESSION 9
-#define Z_DEFAULT_COMPRESSION (-1)
-/* compression levels */
-
-#define Z_FILTERED 1
-#define Z_HUFFMAN_ONLY 2
-#define Z_RLE 3
-#define Z_FIXED 4
-#define Z_DEFAULT_STRATEGY 0
-/* compression strategy; see deflateInit2() below for details */
-
-#define Z_BINARY 0
-#define Z_TEXT 1
-#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */
-#define Z_UNKNOWN 2
-/* Possible values of the data_type field (though see inflate()) */
-
-#define Z_DEFLATED 8
-/* The deflate compression method (the only one supported in this version) */
-
-#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
-
-#define zlib_version zlibVersion()
-/* for compatibility with versions < 1.0.2 */
-
-
- /* basic functions */
-
-ZEXTERN const char * ZEXPORT zlibVersion OF((void));
-/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
- If the first character differs, the library code actually used is not
- compatible with the zlib.h header file used by the application. This check
- is automatically made by deflateInit and inflateInit.
- */
-
-/*
-ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
-
- Initializes the internal stream state for compression. The fields
- zalloc, zfree and opaque must be initialized before by the caller. If
- zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
- allocation functions.
-
- The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
- 1 gives best speed, 9 gives best compression, 0 gives no compression at all
- (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION
- requests a default compromise between speed and compression (currently
- equivalent to level 6).
-
- deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_STREAM_ERROR if level is not a valid compression level, or
- Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
- with the version assumed by the caller (ZLIB_VERSION). msg is set to null
- if there is no error message. deflateInit does not perform any compression:
- this will be done by deflate().
-*/
-
-
-ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
-/*
- deflate compresses as much data as possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may introduce
- some output latency (reading input without producing any output) except when
- forced to flush.
-
- The detailed semantics are as follows. deflate performs one or both of the
- following actions:
-
- - Compress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in and avail_in are updated and
- processing will resume at this point for the next call of deflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. This action is forced if the parameter flush is non zero.
- Forcing flush frequently degrades the compression ratio, so this parameter
- should be set only when necessary (in interactive applications). Some
- output may be provided even if flush is not set.
-
- Before the call of deflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming more
- output, and updating avail_in or avail_out accordingly; avail_out should
- never be zero before the call. The application can consume the compressed
- output when it wants, for example when the output buffer is full (avail_out
- == 0), or after each call of deflate(). If deflate returns Z_OK and with
- zero avail_out, it must be called again after making room in the output
- buffer because there might be more output pending.
-
- Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
- decide how much data to accumulate before producing output, in order to
- maximize compression.
-
- If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
- flushed to the output buffer and the output is aligned on a byte boundary, so
- that the decompressor can get all input data available so far. (In
- particular avail_in is zero after the call if enough output space has been
- provided before the call.) Flushing may degrade compression for some
- compression algorithms and so it should be used only when necessary. This
- completes the current deflate block and follows it with an empty stored block
- that is three bits plus filler bits to the next byte, followed by four bytes
- (00 00 ff ff).
-
- If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
- output buffer, but the output is not aligned to a byte boundary. All of the
- input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
- This completes the current deflate block and follows it with an empty fixed
- codes block that is 10 bits long. This assures that enough bytes are output
- in order for the decompressor to finish the block before the empty fixed code
- block.
-
- If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
- for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
- seven bits of the current block are held to be written as the next byte after
- the next deflate block is completed. In this case, the decompressor may not
- be provided enough bits at this point in order to complete decompression of
- the data provided so far to the compressor. It may need to wait for the next
- block to be emitted. This is for advanced applications that need to control
- the emission of deflate blocks.
-
- If flush is set to Z_FULL_FLUSH, all output is flushed as with
- Z_SYNC_FLUSH, and the compression state is reset so that decompression can
- restart from this point if previous compressed data has been damaged or if
- random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
- compression.
-
- If deflate returns with avail_out == 0, this function must be called again
- with the same value of the flush parameter and more output space (updated
- avail_out), until the flush is complete (deflate returns with non-zero
- avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
- avail_out is greater than six to avoid repeated flush markers due to
- avail_out == 0 on return.
-
- If the parameter flush is set to Z_FINISH, pending input is processed,
- pending output is flushed and deflate returns with Z_STREAM_END if there was
- enough output space; if deflate returns with Z_OK, this function must be
- called again with Z_FINISH and more output space (updated avail_out) but no
- more input data, until it returns with Z_STREAM_END or an error. After
- deflate has returned Z_STREAM_END, the only possible operations on the stream
- are deflateReset or deflateEnd.
-
- Z_FINISH can be used immediately after deflateInit if all the compression
- is to be done in a single step. In this case, avail_out must be at least the
- value returned by deflateBound (see below). If deflate does not return
- Z_STREAM_END, then it must be called again as described above.
-
- deflate() sets strm->adler to the adler32 checksum of all input read
- so far (that is, total_in bytes).
-
- deflate() may update strm->data_type if it can make a good guess about
- the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered
- binary. This field is only for information purposes and does not affect the
- compression algorithm in any manner.
-
- deflate() returns Z_OK if some progress has been made (more input
- processed or more output produced), Z_STREAM_END if all input has been
- consumed and all output has been produced (only when flush is set to
- Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
- if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible
- (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not
- fatal, and deflate() can be called again with more input and more output
- space to continue compressing.
-*/
-
-
-ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any pending
- output.
-
- deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
- stream state was inconsistent, Z_DATA_ERROR if the stream was freed
- prematurely (some input or output was discarded). In the error case, msg
- may be set but then points to a static string (which must not be
- deallocated).
-*/
-
-
-/*
-ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
-
- Initializes the internal stream state for decompression. The fields
- next_in, avail_in, zalloc, zfree and opaque must be initialized before by
- the caller. If next_in is not Z_NULL and avail_in is large enough (the
- exact value depends on the compression method), inflateInit determines the
- compression method from the zlib header and allocates all data structures
- accordingly; otherwise the allocation will be deferred to the first call of
- inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to
- use default allocation functions.
-
- inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
- version assumed by the caller, or Z_STREAM_ERROR if the parameters are
- invalid, such as a null pointer to the structure. msg is set to null if
- there is no error message. inflateInit does not perform any decompression
- apart from possibly reading the zlib header if present: actual decompression
- will be done by inflate(). (So next_in and avail_in may be modified, but
- next_out and avail_out are unused and unchanged.) The current implementation
- of inflateInit() does not process any header information -- that is deferred
- until inflate() is called.
-*/
-
-
-ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
-/*
- inflate decompresses as much data as possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may introduce
- some output latency (reading input without producing any output) except when
- forced to flush.
-
- The detailed semantics are as follows. inflate performs one or both of the
- following actions:
-
- - Decompress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in is updated and processing will
- resume at this point for the next call of inflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. inflate() provides as much output as possible, until there is
- no more input data or no more space in the output buffer (see below about
- the flush parameter).
-
- Before the call of inflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming more
- output, and updating the next_* and avail_* values accordingly. The
- application can consume the uncompressed output when it wants, for example
- when the output buffer is full (avail_out == 0), or after each call of
- inflate(). If inflate returns Z_OK and with zero avail_out, it must be
- called again after making room in the output buffer because there might be
- more output pending.
-
- The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
- Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much
- output as possible to the output buffer. Z_BLOCK requests that inflate()
- stop if and when it gets to the next deflate block boundary. When decoding
- the zlib or gzip format, this will cause inflate() to return immediately
- after the header and before the first block. When doing a raw inflate,
- inflate() will go ahead and process the first block, and will return when it
- gets to the end of that block, or when it runs out of data.
-
- The Z_BLOCK option assists in appending to or combining deflate streams.
- Also to assist in this, on return inflate() will set strm->data_type to the
- number of unused bits in the last byte taken from strm->next_in, plus 64 if
- inflate() is currently decoding the last block in the deflate stream, plus
- 128 if inflate() returned immediately after decoding an end-of-block code or
- decoding the complete header up to just before the first byte of the deflate
- stream. The end-of-block will not be indicated until all of the uncompressed
- data from that block has been written to strm->next_out. The number of
- unused bits may in general be greater than seven, except when bit 7 of
- data_type is set, in which case the number of unused bits will be less than
- eight. data_type is set as noted here every time inflate() returns for all
- flush options, and so can be used to determine the amount of currently
- consumed input in bits.
-
- The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
- end of each deflate block header is reached, before any actual data in that
- block is decoded. This allows the caller to determine the length of the
- deflate block header for later use in random access within a deflate block.
- 256 is added to the value of strm->data_type when inflate() returns
- immediately after reaching the end of the deflate block header.
-
- inflate() should normally be called until it returns Z_STREAM_END or an
- error. However if all decompression is to be performed in a single step (a
- single call of inflate), the parameter flush should be set to Z_FINISH. In
- this case all pending input is processed and all pending output is flushed;
- avail_out must be large enough to hold all the uncompressed data. (The size
- of the uncompressed data may have been saved by the compressor for this
- purpose.) The next operation on this stream must be inflateEnd to deallocate
- the decompression state. The use of Z_FINISH is never required, but can be
- used to inform inflate that a faster approach may be used for the single
- inflate() call.
-
- In this implementation, inflate() always flushes as much output as
- possible to the output buffer, and always uses the faster approach on the
- first call. So the only effect of the flush parameter in this implementation
- is on the return value of inflate(), as noted below, or when it returns early
- because Z_BLOCK or Z_TREES is used.
-
- If a preset dictionary is needed after this call (see inflateSetDictionary
- below), inflate sets strm->adler to the adler32 checksum of the dictionary
- chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
- strm->adler to the adler32 checksum of all output produced so far (that is,
- total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
- below. At the end of the stream, inflate() checks that its computed adler32
- checksum is equal to that saved by the compressor and returns Z_STREAM_END
- only if the checksum is correct.
-
- inflate() can decompress and check either zlib-wrapped or gzip-wrapped
- deflate data. The header type is detected automatically, if requested when
- initializing with inflateInit2(). Any information contained in the gzip
- header is not retained, so applications that need that information should
- instead use raw inflate, see inflateInit2() below, or inflateBack() and
- perform their own processing of the gzip header and trailer.
-
- inflate() returns Z_OK if some progress has been made (more input processed
- or more output produced), Z_STREAM_END if the end of the compressed data has
- been reached and all uncompressed output has been produced, Z_NEED_DICT if a
- preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
- corrupted (input stream not conforming to the zlib format or incorrect check
- value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
- next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory,
- Z_BUF_ERROR if no progress is possible or if there was not enough room in the
- output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
- inflate() can be called again with more input and more output space to
- continue decompressing. If Z_DATA_ERROR is returned, the application may
- then call inflateSync() to look for a good compression block if a partial
- recovery of the data is desired.
-*/
-
-
-ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any pending
- output.
-
- inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
- was inconsistent. In the error case, msg may be set but then points to a
- static string (which must not be deallocated).
-*/
-
-
- /* Advanced functions */
-
-/*
- The following functions are needed only in some special applications.
-*/
-
-/*
-ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
- int level,
- int method,
- int windowBits,
- int memLevel,
- int strategy));
-
- This is another version of deflateInit with more compression options. The
- fields next_in, zalloc, zfree and opaque must be initialized before by the
- caller.
-
- The method parameter is the compression method. It must be Z_DEFLATED in
- this version of the library.
-
- The windowBits parameter is the base two logarithm of the window size
- (the size of the history buffer). It should be in the range 8..15 for this
- version of the library. Larger values of this parameter result in better
- compression at the expense of memory usage. The default value is 15 if
- deflateInit is used instead.
-
- windowBits can also be -8..-15 for raw deflate. In this case, -windowBits
- determines the window size. deflate() will then generate raw deflate data
- with no zlib header or trailer, and will not compute an adler32 check value.
-
- windowBits can also be greater than 15 for optional gzip encoding. Add
- 16 to windowBits to write a simple gzip header and trailer around the
- compressed data instead of a zlib wrapper. The gzip header will have no
- file name, no extra data, no comment, no modification time (set to zero), no
- header crc, and the operating system will be set to 255 (unknown). If a
- gzip stream is being written, strm->adler is a crc32 instead of an adler32.
-
- The memLevel parameter specifies how much memory should be allocated
- for the internal compression state. memLevel=1 uses minimum memory but is
- slow and reduces compression ratio; memLevel=9 uses maximum memory for
- optimal speed. The default value is 8. See zconf.h for total memory usage
- as a function of windowBits and memLevel.
-
- The strategy parameter is used to tune the compression algorithm. Use the
- value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
- filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
- string match), or Z_RLE to limit match distances to one (run-length
- encoding). Filtered data consists mostly of small values with a somewhat
- random distribution. In this case, the compression algorithm is tuned to
- compress them better. The effect of Z_FILTERED is to force more Huffman
- coding and less string matching; it is somewhat intermediate between
- Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as
- fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The
- strategy parameter only affects the compression ratio but not the
- correctness of the compressed output even if it is not set appropriately.
- Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
- decoder for special applications.
-
- deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
- method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
- incompatible with the version assumed by the caller (ZLIB_VERSION). msg is
- set to null if there is no error message. deflateInit2 does not perform any
- compression: this will be done by deflate().
-*/
-
-ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
- const Bytef *dictionary,
- uInt dictLength));
-/*
- Initializes the compression dictionary from the given byte sequence
- without producing any compressed output. This function must be called
- immediately after deflateInit, deflateInit2 or deflateReset, before any call
- of deflate. The compressor and decompressor must use exactly the same
- dictionary (see inflateSetDictionary).
-
- The dictionary should consist of strings (byte sequences) that are likely
- to be encountered later in the data to be compressed, with the most commonly
- used strings preferably put towards the end of the dictionary. Using a
- dictionary is most useful when the data to be compressed is short and can be
- predicted with good accuracy; the data can then be compressed better than
- with the default empty dictionary.
-
- Depending on the size of the compression data structures selected by
- deflateInit or deflateInit2, a part of the dictionary may in effect be
- discarded, for example if the dictionary is larger than the window size
- provided in deflateInit or deflateInit2. Thus the strings most likely to be
- useful should be put at the end of the dictionary, not at the front. In
- addition, the current implementation of deflate will use at most the window
- size minus 262 bytes of the provided dictionary.
-
- Upon return of this function, strm->adler is set to the adler32 value
- of the dictionary; the decompressor may later use this value to determine
- which dictionary has been used by the compressor. (The adler32 value
- applies to the whole dictionary even if only a subset of the dictionary is
- actually used by the compressor.) If a raw deflate was requested, then the
- adler32 value is not computed and strm->adler is not set.
-
- deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
- parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
- inconsistent (for example if deflate has already been called for this stream
- or if the compression method is bsort). deflateSetDictionary does not
- perform any compression: this will be done by deflate().
-*/
-
-ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
- z_streamp source));
-/*
- Sets the destination stream as a complete copy of the source stream.
-
- This function can be useful when several compression strategies will be
- tried, for example when there are several ways of pre-processing the input
- data with a filter. The streams that will be discarded should then be freed
- by calling deflateEnd. Note that deflateCopy duplicates the internal
- compression state which can be quite large, so this strategy is slow and can
- consume lots of memory.
-
- deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
- (such as zalloc being Z_NULL). msg is left unchanged in both source and
- destination.
-*/
-
-ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
-/*
- This function is equivalent to deflateEnd followed by deflateInit,
- but does not free and reallocate all the internal compression state. The
- stream will keep the same compression level and any other attributes that
- may have been set by deflateInit2.
-
- deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being Z_NULL).
-*/
-
-ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
- int level,
- int strategy));
-/*
- Dynamically update the compression level and compression strategy. The
- interpretation of level and strategy is as in deflateInit2. This can be
- used to switch between compression and straight copy of the input data, or
- to switch to a different kind of input data requiring a different strategy.
- If the compression level is changed, the input available so far is
- compressed with the old level (and may be flushed); the new level will take
- effect only at the next call of deflate().
-
- Before the call of deflateParams, the stream state must be set as for
- a call of deflate(), since the currently available input may have to be
- compressed and flushed. In particular, strm->avail_out must be non-zero.
-
- deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
- stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if
- strm->avail_out was zero.
-*/
-
-ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
- int good_length,
- int max_lazy,
- int nice_length,
- int max_chain));
-/*
- Fine tune deflate's internal compression parameters. This should only be
- used by someone who understands the algorithm used by zlib's deflate for
- searching for the best matching string, and even then only by the most
- fanatic optimizer trying to squeeze out the last compressed bit for their
- specific input data. Read the deflate.c source code for the meaning of the
- max_lazy, good_length, nice_length, and max_chain parameters.
-
- deflateTune() can be called after deflateInit() or deflateInit2(), and
- returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
- */
-
-ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
- uLong sourceLen));
-/*
- deflateBound() returns an upper bound on the compressed size after
- deflation of sourceLen bytes. It must be called after deflateInit() or
- deflateInit2(), and after deflateSetHeader(), if used. This would be used
- to allocate an output buffer for deflation in a single pass, and so would be
- called before deflate().
-*/
-
-ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
- int bits,
- int value));
-/*
- deflatePrime() inserts bits in the deflate output stream. The intent
- is that this function is used to start off the deflate output with the bits
- leftover from a previous deflate stream when appending to it. As such, this
- function can only be used for raw deflate, and must be used before the first
- deflate() call after a deflateInit2() or deflateReset(). bits must be less
- than or equal to 16, and that many of the least significant bits of value
- will be inserted in the output.
-
- deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent.
-*/
-
-ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
- gz_headerp head));
-/*
- deflateSetHeader() provides gzip header information for when a gzip
- stream is requested by deflateInit2(). deflateSetHeader() may be called
- after deflateInit2() or deflateReset() and before the first call of
- deflate(). The text, time, os, extra field, name, and comment information
- in the provided gz_header structure are written to the gzip header (xflag is
- ignored -- the extra flags are set according to the compression level). The
- caller must assure that, if not Z_NULL, name and comment are terminated with
- a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
- available there. If hcrc is true, a gzip header crc is included. Note that
- the current versions of the command-line version of gzip (up through version
- 1.3.x) do not support header crc's, and will report that it is a "multi-part
- gzip file" and give up.
-
- If deflateSetHeader is not used, the default gzip header has text false,
- the time set to zero, and os set to 255, with no extra, name, or comment
- fields. The gzip header is returned to the default state by deflateReset().
-
- deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent.
-*/
-
-/*
-ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
- int windowBits));
-
- This is another version of inflateInit with an extra parameter. The
- fields next_in, avail_in, zalloc, zfree and opaque must be initialized
- before by the caller.
-
- The windowBits parameter is the base two logarithm of the maximum window
- size (the size of the history buffer). It should be in the range 8..15 for
- this version of the library. The default value is 15 if inflateInit is used
- instead. windowBits must be greater than or equal to the windowBits value
- provided to deflateInit2() while compressing, or it must be equal to 15 if
- deflateInit2() was not used. If a compressed stream with a larger window
- size is given as input, inflate() will return with the error code
- Z_DATA_ERROR instead of trying to allocate a larger window.
-
- windowBits can also be zero to request that inflate use the window size in
- the zlib header of the compressed stream.
-
- windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
- determines the window size. inflate() will then process raw deflate data,
- not looking for a zlib or gzip header, not generating a check value, and not
- looking for any check values for comparison at the end of the stream. This
- is for use with other formats that use the deflate compressed data format
- such as zip. Those formats provide their own check values. If a custom
- format is developed using the raw deflate format for compressed data, it is
- recommended that a check value such as an adler32 or a crc32 be applied to
- the uncompressed data as is done in the zlib, gzip, and zip formats. For
- most applications, the zlib format should be used as is. Note that comments
- above on the use in deflateInit2() applies to the magnitude of windowBits.
-
- windowBits can also be greater than 15 for optional gzip decoding. Add
- 32 to windowBits to enable zlib and gzip decoding with automatic header
- detection, or add 16 to decode only the gzip format (the zlib format will
- return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a
- crc32 instead of an adler32.
-
- inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
- version assumed by the caller, or Z_STREAM_ERROR if the parameters are
- invalid, such as a null pointer to the structure. msg is set to null if
- there is no error message. inflateInit2 does not perform any decompression
- apart from possibly reading the zlib header if present: actual decompression
- will be done by inflate(). (So next_in and avail_in may be modified, but
- next_out and avail_out are unused and unchanged.) The current implementation
- of inflateInit2() does not process any header information -- that is
- deferred until inflate() is called.
-*/
-
-ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
- const Bytef *dictionary,
- uInt dictLength));
-/*
- Initializes the decompression dictionary from the given uncompressed byte
- sequence. This function must be called immediately after a call of inflate,
- if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
- can be determined from the adler32 value returned by that call of inflate.
- The compressor and decompressor must use exactly the same dictionary (see
- deflateSetDictionary). For raw inflate, this function can be called
- immediately after inflateInit2() or inflateReset() and before any call of
- inflate() to set the dictionary. The application must insure that the
- dictionary that was used for compression is provided.
-
- inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
- parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
- inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
- expected one (incorrect adler32 value). inflateSetDictionary does not
- perform any decompression: this will be done by subsequent calls of
- inflate().
-*/
-
-ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
-/*
- Skips invalid compressed data until a full flush point (see above the
- description of deflate with Z_FULL_FLUSH) can be found, or until all
- available input is skipped. No output is provided.
-
- inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
- if no more input was provided, Z_DATA_ERROR if no flush point has been
- found, or Z_STREAM_ERROR if the stream structure was inconsistent. In the
- success case, the application may save the current current value of total_in
- which indicates where valid compressed data was found. In the error case,
- the application may repeatedly call inflateSync, providing more input each
- time, until success or end of the input data.
-*/
-
-ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
- z_streamp source));
-/*
- Sets the destination stream as a complete copy of the source stream.
-
- This function can be useful when randomly accessing a large stream. The
- first pass through the stream can periodically record the inflate state,
- allowing restarting inflate at those points when randomly accessing the
- stream.
-
- inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
- (such as zalloc being Z_NULL). msg is left unchanged in both source and
- destination.
-*/
-
-ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
-/*
- This function is equivalent to inflateEnd followed by inflateInit,
- but does not free and reallocate all the internal decompression state. The
- stream will keep attributes that may have been set by inflateInit2.
-
- inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being Z_NULL).
-*/
-
-ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
- int windowBits));
-/*
- This function is the same as inflateReset, but it also permits changing
- the wrap and window size requests. The windowBits parameter is interpreted
- the same as it is for inflateInit2.
-
- inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being Z_NULL), or if
- the windowBits parameter is invalid.
-*/
-
-ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
- int bits,
- int value));
-/*
- This function inserts bits in the inflate input stream. The intent is
- that this function is used to start inflating at a bit position in the
- middle of a byte. The provided bits will be used before any bytes are used
- from next_in. This function should only be used with raw inflate, and
- should be used before the first inflate() call after inflateInit2() or
- inflateReset(). bits must be less than or equal to 16, and that many of the
- least significant bits of value will be inserted in the input.
-
- If bits is negative, then the input stream bit buffer is emptied. Then
- inflatePrime() can be called again to put bits in the buffer. This is used
- to clear out bits leftover after feeding inflate a block description prior
- to feeding inflate codes.
-
- inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent.
-*/
-
-ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
-/*
- This function returns two values, one in the lower 16 bits of the return
- value, and the other in the remaining upper bits, obtained by shifting the
- return value down 16 bits. If the upper value is -1 and the lower value is
- zero, then inflate() is currently decoding information outside of a block.
- If the upper value is -1 and the lower value is non-zero, then inflate is in
- the middle of a stored block, with the lower value equaling the number of
- bytes from the input remaining to copy. If the upper value is not -1, then
- it is the number of bits back from the current bit position in the input of
- the code (literal or length/distance pair) currently being processed. In
- that case the lower value is the number of bytes already emitted for that
- code.
-
- A code is being processed if inflate is waiting for more input to complete
- decoding of the code, or if it has completed decoding but is waiting for
- more output space to write the literal or match data.
-
- inflateMark() is used to mark locations in the input data for random
- access, which may be at bit positions, and to note those cases where the
- output of a code may span boundaries of random access blocks. The current
- location in the input stream can be determined from avail_in and data_type
- as noted in the description for the Z_BLOCK flush parameter for inflate.
-
- inflateMark returns the value noted above or -1 << 16 if the provided
- source stream state was inconsistent.
-*/
-
-ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
- gz_headerp head));
-/*
- inflateGetHeader() requests that gzip header information be stored in the
- provided gz_header structure. inflateGetHeader() may be called after
- inflateInit2() or inflateReset(), and before the first call of inflate().
- As inflate() processes the gzip stream, head->done is zero until the header
- is completed, at which time head->done is set to one. If a zlib stream is
- being decoded, then head->done is set to -1 to indicate that there will be
- no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be
- used to force inflate() to return immediately after header processing is
- complete and before any actual data is decompressed.
-
- The text, time, xflags, and os fields are filled in with the gzip header
- contents. hcrc is set to true if there is a header CRC. (The header CRC
- was valid if done is set to one.) If extra is not Z_NULL, then extra_max
- contains the maximum number of bytes to write to extra. Once done is true,
- extra_len contains the actual extra field length, and extra contains the
- extra field, or that field truncated if extra_max is less than extra_len.
- If name is not Z_NULL, then up to name_max characters are written there,
- terminated with a zero unless the length is greater than name_max. If
- comment is not Z_NULL, then up to comm_max characters are written there,
- terminated with a zero unless the length is greater than comm_max. When any
- of extra, name, or comment are not Z_NULL and the respective field is not
- present in the header, then that field is set to Z_NULL to signal its
- absence. This allows the use of deflateSetHeader() with the returned
- structure to duplicate the header. However if those fields are set to
- allocated memory, then the application will need to save those pointers
- elsewhere so that they can be eventually freed.
-
- If inflateGetHeader is not used, then the header information is simply
- discarded. The header is always checked for validity, including the header
- CRC if present. inflateReset() will reset the process to discard the header
- information. The application would need to call inflateGetHeader() again to
- retrieve the header from the next gzip stream.
-
- inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent.
-*/
-
-/*
-ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
- unsigned char FAR *window));
-
- Initialize the internal stream state for decompression using inflateBack()
- calls. The fields zalloc, zfree and opaque in strm must be initialized
- before the call. If zalloc and zfree are Z_NULL, then the default library-
- derived memory allocation routines are used. windowBits is the base two
- logarithm of the window size, in the range 8..15. window is a caller
- supplied buffer of that size. Except for special applications where it is
- assured that deflate was used with small window sizes, windowBits must be 15
- and a 32K byte window must be supplied to be able to decompress general
- deflate streams.
-
- See inflateBack() for the usage of these routines.
-
- inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
- the paramaters are invalid, Z_MEM_ERROR if the internal state could not be
- allocated, or Z_VERSION_ERROR if the version of the library does not match
- the version of the header file.
-*/
-
-typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
-typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
-
-ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
- in_func in, void FAR *in_desc,
- out_func out, void FAR *out_desc));
-/*
- inflateBack() does a raw inflate with a single call using a call-back
- interface for input and output. This is more efficient than inflate() for
- file i/o applications in that it avoids copying between the output and the
- sliding window by simply making the window itself the output buffer. This
- function trusts the application to not change the output buffer passed by
- the output function, at least until inflateBack() returns.
-
- inflateBackInit() must be called first to allocate the internal state
- and to initialize the state with the user-provided window buffer.
- inflateBack() may then be used multiple times to inflate a complete, raw
- deflate stream with each call. inflateBackEnd() is then called to free the
- allocated state.
-
- A raw deflate stream is one with no zlib or gzip header or trailer.
- This routine would normally be used in a utility that reads zip or gzip
- files and writes out uncompressed files. The utility would decode the
- header and process the trailer on its own, hence this routine expects only
- the raw deflate stream to decompress. This is different from the normal
- behavior of inflate(), which expects either a zlib or gzip header and
- trailer around the deflate stream.
-
- inflateBack() uses two subroutines supplied by the caller that are then
- called by inflateBack() for input and output. inflateBack() calls those
- routines until it reads a complete deflate stream and writes out all of the
- uncompressed data, or until it encounters an error. The function's
- parameters and return types are defined above in the in_func and out_func
- typedefs. inflateBack() will call in(in_desc, &buf) which should return the
- number of bytes of provided input, and a pointer to that input in buf. If
- there is no input available, in() must return zero--buf is ignored in that
- case--and inflateBack() will return a buffer error. inflateBack() will call
- out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out()
- should return zero on success, or non-zero on failure. If out() returns
- non-zero, inflateBack() will return with an error. Neither in() nor out()
- are permitted to change the contents of the window provided to
- inflateBackInit(), which is also the buffer that out() uses to write from.
- The length written by out() will be at most the window size. Any non-zero
- amount of input may be provided by in().
-
- For convenience, inflateBack() can be provided input on the first call by
- setting strm->next_in and strm->avail_in. If that input is exhausted, then
- in() will be called. Therefore strm->next_in must be initialized before
- calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called
- immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in
- must also be initialized, and then if strm->avail_in is not zero, input will
- initially be taken from strm->next_in[0 .. strm->avail_in - 1].
-
- The in_desc and out_desc parameters of inflateBack() is passed as the
- first parameter of in() and out() respectively when they are called. These
- descriptors can be optionally used to pass any information that the caller-
- supplied in() and out() functions need to do their job.
-
- On return, inflateBack() will set strm->next_in and strm->avail_in to
- pass back any unused input that was provided by the last in() call. The
- return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
- if in() or out() returned an error, Z_DATA_ERROR if there was a format error
- in the deflate stream (in which case strm->msg is set to indicate the nature
- of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
- In the case of Z_BUF_ERROR, an input or output error can be distinguished
- using strm->next_in which will be Z_NULL only if in() returned an error. If
- strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
- non-zero. (in() will always be called before out(), so strm->next_in is
- assured to be defined if out() returns non-zero.) Note that inflateBack()
- cannot return Z_OK.
-*/
-
-ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
-/*
- All memory allocated by inflateBackInit() is freed.
-
- inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
- state was inconsistent.
-*/
-
-ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
-/* Return flags indicating compile-time options.
-
- Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
- 1.0: size of uInt
- 3.2: size of uLong
- 5.4: size of voidpf (pointer)
- 7.6: size of z_off_t
-
- Compiler, assembler, and debug options:
- 8: DEBUG
- 9: ASMV or ASMINF -- use ASM code
- 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
- 11: 0 (reserved)
-
- One-time table building (smaller code, but not thread-safe if true):
- 12: BUILDFIXED -- build static block decoding tables when needed
- 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
- 14,15: 0 (reserved)
-
- Library content (indicates missing functionality):
- 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
- deflate code when not needed)
- 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
- and decode gzip streams (to avoid linking crc code)
- 18-19: 0 (reserved)
-
- Operation variations (changes in library functionality):
- 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
- 21: FASTEST -- deflate algorithm with only one, lowest compression level
- 22,23: 0 (reserved)
-
- The sprintf variant used by gzprintf (zero is best):
- 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
- 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
- 26: 0 = returns value, 1 = void -- 1 means inferred string length returned
-
- Remainder:
- 27-31: 0 (reserved)
- */
-
-
- /* utility functions */
-
-/*
- The following utility functions are implemented on top of the basic
- stream-oriented functions. To simplify the interface, some default options
- are assumed (compression level and memory usage, standard memory allocation
- functions). The source code of these utility functions can be modified if
- you need special options.
-*/
-
-ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen,
- const Bytef *source, uLong sourceLen));
-/*
- Compresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total size
- of the destination buffer, which must be at least the value returned by
- compressBound(sourceLen). Upon exit, destLen is the actual size of the
- compressed buffer.
-
- compress returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_BUF_ERROR if there was not enough room in the output
- buffer.
-*/
-
-ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen,
- const Bytef *source, uLong sourceLen,
- int level));
-/*
- Compresses the source buffer into the destination buffer. The level
- parameter has the same meaning as in deflateInit. sourceLen is the byte
- length of the source buffer. Upon entry, destLen is the total size of the
- destination buffer, which must be at least the value returned by
- compressBound(sourceLen). Upon exit, destLen is the actual size of the
- compressed buffer.
-
- compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_BUF_ERROR if there was not enough room in the output buffer,
- Z_STREAM_ERROR if the level parameter is invalid.
-*/
-
-ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
-/*
- compressBound() returns an upper bound on the compressed size after
- compress() or compress2() on sourceLen bytes. It would be used before a
- compress() or compress2() call to allocate the destination buffer.
-*/
-
-ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
- const Bytef *source, uLong sourceLen));
-/*
- Decompresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total size
- of the destination buffer, which must be large enough to hold the entire
- uncompressed data. (The size of the uncompressed data must have been saved
- previously by the compressor and transmitted to the decompressor by some
- mechanism outside the scope of this compression library.) Upon exit, destLen
- is the actual size of the uncompressed buffer.
-
- uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_BUF_ERROR if there was not enough room in the output
- buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.
-*/
-
-
- /* gzip file access functions */
-
-/*
- This library supports reading and writing files in gzip (.gz) format with
- an interface similar to that of stdio, using the functions that start with
- "gz". The gzip format is different from the zlib format. gzip is a gzip
- wrapper, documented in RFC 1952, wrapped around a deflate stream.
-*/
-
-typedef voidp gzFile; /* opaque gzip file descriptor */
-
-/*
-ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
-
- Opens a gzip (.gz) file for reading or writing. The mode parameter is as
- in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
- a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
- compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
- for fixed code compression as in "wb9F". (See the description of
- deflateInit2 for more information about the strategy parameter.) Also "a"
- can be used instead of "w" to request that the gzip stream that will be
- written be appended to the file. "+" will result in an error, since reading
- and writing to the same gzip file is not supported.
-
- gzopen can be used to read a file which is not in gzip format; in this
- case gzread will directly read from the file without decompression.
-
- gzopen returns NULL if the file could not be opened, if there was
- insufficient memory to allocate the gzFile state, or if an invalid mode was
- specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
- errno can be checked to determine if the reason gzopen failed was that the
- file could not be opened.
-*/
-
-ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
-/*
- gzdopen associates a gzFile with the file descriptor fd. File descriptors
- are obtained from calls like open, dup, creat, pipe or fileno (if the file
- has been previously opened with fopen). The mode parameter is as in gzopen.
-
- The next call of gzclose on the returned gzFile will also close the file
- descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
- fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
- mode);. The duplicated descriptor should be saved to avoid a leak, since
- gzdopen does not close fd if it fails.
-
- gzdopen returns NULL if there was insufficient memory to allocate the
- gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
- provided, or '+' was provided), or if fd is -1. The file descriptor is not
- used until the next gz* read, write, seek, or close operation, so gzdopen
- will not detect if fd is invalid (unless fd is -1).
-*/
-
-ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
-/*
- Set the internal buffer size used by this library's functions. The
- default buffer size is 8192 bytes. This function must be called after
- gzopen() or gzdopen(), and before any other calls that read or write the
- file. The buffer memory allocation is always deferred to the first read or
- write. Two buffers are allocated, either both of the specified size when
- writing, or one of the specified size and the other twice that size when
- reading. A larger buffer size of, for example, 64K or 128K bytes will
- noticeably increase the speed of decompression (reading).
-
- The new buffer size also affects the maximum length for gzprintf().
-
- gzbuffer() returns 0 on success, or -1 on failure, such as being called
- too late.
-*/
-
-ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
-/*
- Dynamically update the compression level or strategy. See the description
- of deflateInit2 for the meaning of these parameters.
-
- gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
- opened for writing.
-*/
-
-ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
-/*
- Reads the given number of uncompressed bytes from the compressed file. If
- the input file was not in gzip format, gzread copies the given number of
- bytes into the buffer.
-
- After reaching the end of a gzip stream in the input, gzread will continue
- to read, looking for another gzip stream, or failing that, reading the rest
- of the input file directly without decompression. The entire input file
- will be read if gzread is called until it returns less than the requested
- len.
-
- gzread returns the number of uncompressed bytes actually read, less than
- len for end of file, or -1 for error.
-*/
-
-ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
- voidpc buf, unsigned len));
-/*
- Writes the given number of uncompressed bytes into the compressed file.
- gzwrite returns the number of uncompressed bytes written or 0 in case of
- error.
-*/
-
-ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
-/*
- Converts, formats, and writes the arguments to the compressed file under
- control of the format string, as in fprintf. gzprintf returns the number of
- uncompressed bytes actually written, or 0 in case of error. The number of
- uncompressed bytes written is limited to 8191, or one less than the buffer
- size given to gzbuffer(). The caller should assure that this limit is not
- exceeded. If it is exceeded, then gzprintf() will return an error (0) with
- nothing written. In this case, there may also be a buffer overflow with
- unpredictable consequences, which is possible only if zlib was compiled with
- the insecure functions sprintf() or vsprintf() because the secure snprintf()
- or vsnprintf() functions were not available. This can be determined using
- zlibCompileFlags().
-*/
-
-ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
-/*
- Writes the given null-terminated string to the compressed file, excluding
- the terminating null character.
-
- gzputs returns the number of characters written, or -1 in case of error.
-*/
-
-ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
-/*
- Reads bytes from the compressed file until len-1 characters are read, or a
- newline character is read and transferred to buf, or an end-of-file
- condition is encountered. If any characters are read or if len == 1, the
- string is terminated with a null character. If no characters are read due
- to an end-of-file or len < 1, then the buffer is left untouched.
-
- gzgets returns buf which is a null-terminated string, or it returns NULL
- for end-of-file or in case of error. If there was an error, the contents at
- buf are indeterminate.
-*/
-
-ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
-/*
- Writes c, converted to an unsigned char, into the compressed file. gzputc
- returns the value that was written, or -1 in case of error.
-*/
-
-ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
-/*
- Reads one byte from the compressed file. gzgetc returns this byte or -1
- in case of end of file or error.
-*/
-
-ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
-/*
- Push one character back onto the stream to be read as the first character
- on the next read. At least one character of push-back is allowed.
- gzungetc() returns the character pushed, or -1 on failure. gzungetc() will
- fail if c is -1, and may fail if a character has been pushed but not read
- yet. If gzungetc is used immediately after gzopen or gzdopen, at least the
- output buffer size of pushed characters is allowed. (See gzbuffer above.)
- The pushed character will be discarded if the stream is repositioned with
- gzseek() or gzrewind().
-*/
-
-ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
-/*
- Flushes all pending output into the compressed file. The parameter flush
- is as in the deflate() function. The return value is the zlib error number
- (see function gzerror below). gzflush is only permitted when writing.
-
- If the flush parameter is Z_FINISH, the remaining data is written and the
- gzip stream is completed in the output. If gzwrite() is called again, a new
- gzip stream will be started in the output. gzread() is able to read such
- concatented gzip streams.
-
- gzflush should be called only when strictly necessary because it will
- degrade compression if called too often.
-*/
-
-/*
-ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
- z_off_t offset, int whence));
-
- Sets the starting position for the next gzread or gzwrite on the given
- compressed file. The offset represents a number of bytes in the
- uncompressed data stream. The whence parameter is defined as in lseek(2);
- the value SEEK_END is not supported.
-
- If the file is opened for reading, this function is emulated but can be
- extremely slow. If the file is opened for writing, only forward seeks are
- supported; gzseek then compresses a sequence of zeroes up to the new
- starting position.
-
- gzseek returns the resulting offset location as measured in bytes from
- the beginning of the uncompressed stream, or -1 in case of error, in
- particular if the file is opened for writing and the new starting position
- would be before the current position.
-*/
-
-ZEXTERN int ZEXPORT gzrewind OF((gzFile file));
-/*
- Rewinds the given file. This function is supported only for reading.
-
- gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
-*/
-
-/*
-ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file));
-
- Returns the starting position for the next gzread or gzwrite on the given
- compressed file. This position represents a number of bytes in the
- uncompressed data stream, and is zero when starting, even if appending or
- reading a gzip stream from the middle of a file using gzdopen().
-
- gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
-*/
-
-/*
-ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
-
- Returns the current offset in the file being read or written. This offset
- includes the count of bytes that precede the gzip stream, for example when
- appending or when using gzdopen() for reading. When reading, the offset
- does not include as yet unused buffered input. This information can be used
- for a progress indicator. On error, gzoffset() returns -1.
-*/
-
-ZEXTERN int ZEXPORT gzeof OF((gzFile file));
-/*
- Returns true (1) if the end-of-file indicator has been set while reading,
- false (0) otherwise. Note that the end-of-file indicator is set only if the
- read tried to go past the end of the input, but came up short. Therefore,
- just like feof(), gzeof() may return false even if there is no more data to
- read, in the event that the last read request was for the exact number of
- bytes remaining in the input file. This will happen if the input file size
- is an exact multiple of the buffer size.
-
- If gzeof() returns true, then the read functions will return no more data,
- unless the end-of-file indicator is reset by gzclearerr() and the input file
- has grown since the previous end of file was detected.
-*/
-
-ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
-/*
- Returns true (1) if file is being copied directly while reading, or false
- (0) if file is a gzip stream being decompressed. This state can change from
- false to true while reading the input file if the end of a gzip stream is
- reached, but is followed by data that is not another gzip stream.
-
- If the input file is empty, gzdirect() will return true, since the input
- does not contain a gzip stream.
-
- If gzdirect() is used immediately after gzopen() or gzdopen() it will
- cause buffers to be allocated to allow reading the file to determine if it
- is a gzip file. Therefore if gzbuffer() is used, it should be called before
- gzdirect().
-*/
-
-ZEXTERN int ZEXPORT gzclose OF((gzFile file));
-/*
- Flushes all pending output if necessary, closes the compressed file and
- deallocates the (de)compression state. Note that once file is closed, you
- cannot call gzerror with file, since its structures have been deallocated.
- gzclose must not be called more than once on the same file, just as free
- must not be called more than once on the same allocation.
-
- gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
- file operation error, or Z_OK on success.
-*/
-
-ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
-ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
-/*
- Same as gzclose(), but gzclose_r() is only for use when reading, and
- gzclose_w() is only for use when writing or appending. The advantage to
- using these instead of gzclose() is that they avoid linking in zlib
- compression or decompression code that is not used when only reading or only
- writing respectively. If gzclose() is used, then both compression and
- decompression code will be included the application when linking to a static
- zlib library.
-*/
-
-ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
-/*
- Returns the error message for the last error which occurred on the given
- compressed file. errnum is set to zlib error number. If an error occurred
- in the file system and not in the compression library, errnum is set to
- Z_ERRNO and the application may consult errno to get the exact error code.
-
- The application must not modify the returned string. Future calls to
- this function may invalidate the previously returned string. If file is
- closed, then the string previously returned by gzerror will no longer be
- available.
-
- gzerror() should be used to distinguish errors from end-of-file for those
- functions above that do not distinguish those cases in their return values.
-*/
-
-ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
-/*
- Clears the error and end-of-file flags for file. This is analogous to the
- clearerr() function in stdio. This is useful for continuing to read a gzip
- file that is being written concurrently.
-*/
-
-
- /* checksum functions */
-
-/*
- These functions are not related to compression but are exported
- anyway because they might be useful in applications using the compression
- library.
-*/
-
-ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
-/*
- Update a running Adler-32 checksum with the bytes buf[0..len-1] and
- return the updated checksum. If buf is Z_NULL, this function returns the
- required initial value for the checksum.
-
- An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
- much faster.
-
- Usage example:
-
- uLong adler = adler32(0L, Z_NULL, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- adler = adler32(adler, buffer, length);
- }
- if (adler != original_adler) error();
-*/
-
-/*
-ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
- z_off_t len2));
-
- Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
- and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
- each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
- seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
-*/
-
-ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
-/*
- Update a running CRC-32 with the bytes buf[0..len-1] and return the
- updated CRC-32. If buf is Z_NULL, this function returns the required
- initial value for the for the crc. Pre- and post-conditioning (one's
- complement) is performed within this function so it shouldn't be done by the
- application.
-
- Usage example:
-
- uLong crc = crc32(0L, Z_NULL, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- crc = crc32(crc, buffer, length);
- }
- if (crc != original_crc) error();
-*/
-
-/*
-ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
-
- Combine two CRC-32 check values into one. For two sequences of bytes,
- seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
- calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32
- check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
- len2.
-*/
-
-
- /* various hacks, don't look :) */
-
-/* deflateInit and inflateInit are macros to allow checking the zlib version
- * and the compiler's view of z_stream:
- */
-ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
- const char *version, int stream_size));
-ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
- const char *version, int stream_size));
-ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
- int windowBits, int memLevel,
- int strategy, const char *version,
- int stream_size));
-ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
- const char *version, int stream_size));
-ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
- unsigned char FAR *window,
- const char *version,
- int stream_size));
-#define deflateInit(strm, level) \
- deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit(strm) \
- inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
-#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
- deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
- (strategy), ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit2(strm, windowBits) \
- inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
-#define inflateBackInit(strm, windowBits, window) \
- inflateBackInit_((strm), (windowBits), (window), \
- ZLIB_VERSION, sizeof(z_stream))
-
-/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
- * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
- * both are true, the application gets the *64 functions, and the regular
- * functions are changed to 64 bits) -- in case these are set on systems
- * without large file support, _LFS64_LARGEFILE must also be true
- */
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
- ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
- ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
- ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
- ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
- ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
- ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
-#endif
-
-#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
-# define gzopen gzopen64
-# define gzseek gzseek64
-# define gztell gztell64
-# define gzoffset gzoffset64
-# define adler32_combine adler32_combine64
-# define crc32_combine crc32_combine64
-# ifdef _LARGEFILE64_SOURCE
- ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
- ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
- ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
- ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
- ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
- ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
-# endif
-#else
- ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
- ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
- ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
- ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
- ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
- ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
-#endif
-
-/* hack for buggy compilers */
-#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
- struct internal_state {int dummy;};
-#endif
-
-/* undocumented functions */
-ZEXTERN const char * ZEXPORT zError OF((int));
-ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp));
-ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void));
-ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int));
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* ZLIB_H */
diff --git a/heimdall-frontend/lib/win32/zlib.lib b/heimdall-frontend/lib/win32/zlib.lib
deleted file mode 100644
index 9da4aeb..0000000
--- a/heimdall-frontend/lib/win32/zlib.lib
+++ /dev/null
Binary files differ
diff --git a/heimdall-frontend/Source/Alerts.cpp b/heimdall-frontend/source/Alerts.cpp
index 0dfe19c..0dfe19c 100644
--- a/heimdall-frontend/Source/Alerts.cpp
+++ b/heimdall-frontend/source/Alerts.cpp
diff --git a/heimdall-frontend/Source/Alerts.h b/heimdall-frontend/source/Alerts.h
index 68b9c91..68b9c91 100644
--- a/heimdall-frontend/Source/Alerts.h
+++ b/heimdall-frontend/source/Alerts.h
diff --git a/heimdall-frontend/Source/FirmwareInfo.cpp b/heimdall-frontend/source/FirmwareInfo.cpp
index c01d636..c01d636 100644
--- a/heimdall-frontend/Source/FirmwareInfo.cpp
+++ b/heimdall-frontend/source/FirmwareInfo.cpp
diff --git a/heimdall-frontend/Source/FirmwareInfo.h b/heimdall-frontend/source/FirmwareInfo.h
index 8e6713e..8e6713e 100644
--- a/heimdall-frontend/Source/FirmwareInfo.h
+++ b/heimdall-frontend/source/FirmwareInfo.h
diff --git a/heimdall-frontend/Source/PackageData.cpp b/heimdall-frontend/source/PackageData.cpp
index c3689b3..c3689b3 100644
--- a/heimdall-frontend/Source/PackageData.cpp
+++ b/heimdall-frontend/source/PackageData.cpp
diff --git a/heimdall-frontend/Source/PackageData.h b/heimdall-frontend/source/PackageData.h
index 84f081c..84f081c 100644
--- a/heimdall-frontend/Source/PackageData.h
+++ b/heimdall-frontend/source/PackageData.h
diff --git a/heimdall-frontend/Source/Packaging.cpp b/heimdall-frontend/source/Packaging.cpp
index 7a27b3c..7a27b3c 100644
--- a/heimdall-frontend/Source/Packaging.cpp
+++ b/heimdall-frontend/source/Packaging.cpp
diff --git a/heimdall-frontend/Source/Packaging.h b/heimdall-frontend/source/Packaging.h
index 8ba83f7..8ba83f7 100644
--- a/heimdall-frontend/Source/Packaging.h
+++ b/heimdall-frontend/source/Packaging.h
diff --git a/heimdall-frontend/Source/aboutform.cpp b/heimdall-frontend/source/aboutform.cpp
index fbb3fb1..93e56fb 100644
--- a/heimdall-frontend/Source/aboutform.cpp
+++ b/heimdall-frontend/source/aboutform.cpp
@@ -1,126 +1,126 @@
-/* Copyright (c) 2010-2014 Benjamin Dobell, Glass Echidna
-
- Permission is hereby granted, free of charge, to any person obtaining a copy
- of this software and associated documentation files (the "Software"), to deal
- in the Software without restriction, including without limitation the rights
- to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- copies of the Software, and to permit persons to whom the Software is
- furnished to do so, subject to the following conditions:
-
- The above copyright notice and this permission notice shall be included in
- all copies or substantial portions of the Software.
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- THE SOFTWARE.*/
-
-// Qt
-#include <QDir>
-#include <QProcess>
-
-// Heimdall Frontend
-#include "aboutform.h"
-
-#include <QStringList>
-
-#define UNUSED(x) (void)(x)
-
-using namespace HeimdallFrontend;
-
-AboutForm::AboutForm(QWidget *parent) : QWidget(parent)
-{
- setupUi(this);
-
- // Heimdall Command Line
- QObject::connect(&heimdallProcess, SIGNAL(readyRead()), this, SLOT(HandleHeimdallStdout()));
- QObject::connect(&heimdallProcess, SIGNAL(finished(int, QProcess::ExitStatus)), this, SLOT(HandleHeimdallReturned(int, QProcess::ExitStatus)));
- QObject::connect(&heimdallProcess, SIGNAL(error(QProcess::ProcessError)), this, SLOT(HandleHeimdallError(QProcess::ProcessError)));
-
- heimdallFailed = false;
-
- RetrieveHeimdallVersion();
-}
-
-void AboutForm::RetrieveHeimdallVersion(void)
-{
- heimdallProcess.setReadChannel(QProcess::StandardOutput);
-
- heimdallProcess.start("heimdall", QStringList("version"));
- heimdallProcess.waitForFinished(350);
-
- // OS X was playing up and not finding heimdall, so we're manually checking the PATH.
- if (heimdallFailed)
- {
- QStringList environment = QProcess::systemEnvironment();
-
- QStringList paths;
-
- // Ensure /usr/bin is in PATH
- for (int i = 0; i < environment.length(); i++)
- {
- if (environment[i].left(5) == "PATH=")
- {
- paths = environment[i].mid(5).split(':');
- paths.prepend("/usr/bin");
- break;
- }
- }
-
- int pathIndex = -1;
-
- while (heimdallFailed && ++pathIndex < paths.length())
- {
- QString heimdallPath = paths[pathIndex];
-
- if (heimdallPath.length() > 0)
- {
- heimdallFailed = false;
-
- if (heimdallPath[heimdallPath.length() - 1] != QDir::separator())
- heimdallPath += QDir::separator();
-
- heimdallPath += "heimdall";
-
- heimdallProcess.start(heimdallPath, QStringList("version"));
- heimdallProcess.waitForFinished(350);
- }
- }
-
- if (heimdallFailed)
- versionCopyrightLabel->setText(versionCopyrightLabel->text().replace("%HEIMDALL-VERSION%", ""));
- }
-}
-
-void AboutForm::HandleHeimdallStdout(void)
-{
- QString version = heimdallProcess.readAll();
-
- if (version.length() > 0)
- {
- if (version.at(0) == QChar('v'))
- version = version.mid(1);
-
- versionCopyrightLabel->setText(versionCopyrightLabel->text().replace("%HEIMDALL-VERSION%", "Version " + version + "<br />"));
- }
-}
-
-void AboutForm::HandleHeimdallReturned(int exitCode, QProcess::ExitStatus exitStatus)
-{
- UNUSED(exitCode);
- UNUSED(exitStatus);
-
- // If for some reason %HEIMDALL-VERSION% hasn't been replaced yet, we'll replace it with an empty string.
- versionCopyrightLabel->setText(versionCopyrightLabel->text().replace("%HEIMDALL-VERSION%", ""));
-}
-
-void AboutForm::HandleHeimdallError(QProcess::ProcessError error)
-{
- UNUSED(error);
-
- heimdallFailed = true;
-}
-
+/* Copyright (c) 2010-2014 Benjamin Dobell, Glass Echidna
+
+ Permission is hereby granted, free of charge, to any person obtaining a copy
+ of this software and associated documentation files (the "Software"), to deal
+ in the Software without restriction, including without limitation the rights
+ to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ copies of the Software, and to permit persons to whom the Software is
+ furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be included in
+ all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ THE SOFTWARE.*/
+
+// Qt
+#include <QDir>
+#include <QProcess>
+
+// Heimdall Frontend
+#include "aboutform.h"
+
+#include <QStringList>
+
+#define UNUSED(x) (void)(x)
+
+using namespace HeimdallFrontend;
+
+AboutForm::AboutForm(QWidget *parent) : QWidget(parent)
+{
+ setupUi(this);
+
+ // Heimdall Command Line
+ QObject::connect(&heimdallProcess, SIGNAL(readyRead()), this, SLOT(HandleHeimdallStdout()));
+ QObject::connect(&heimdallProcess, SIGNAL(finished(int, QProcess::ExitStatus)), this, SLOT(HandleHeimdallReturned(int, QProcess::ExitStatus)));
+ QObject::connect(&heimdallProcess, SIGNAL(error(QProcess::ProcessError)), this, SLOT(HandleHeimdallError(QProcess::ProcessError)));
+
+ heimdallFailed = false;
+
+ RetrieveHeimdallVersion();
+}
+
+void AboutForm::RetrieveHeimdallVersion(void)
+{
+ heimdallProcess.setReadChannel(QProcess::StandardOutput);
+
+ heimdallProcess.start("heimdall", QStringList("version"));
+ heimdallProcess.waitForFinished(350);
+
+ // OS X was playing up and not finding heimdall, so we're manually checking the PATH.
+ if (heimdallFailed)
+ {
+ QStringList environment = QProcess::systemEnvironment();
+
+ QStringList paths;
+
+ // Ensure /usr/bin is in PATH
+ for (int i = 0; i < environment.length(); i++)
+ {
+ if (environment[i].left(5) == "PATH=")
+ {
+ paths = environment[i].mid(5).split(':');
+ paths.prepend("/usr/bin");
+ break;
+ }
+ }
+
+ int pathIndex = -1;
+
+ while (heimdallFailed && ++pathIndex < paths.length())
+ {
+ QString heimdallPath = paths[pathIndex];
+
+ if (heimdallPath.length() > 0)
+ {
+ heimdallFailed = false;
+
+ if (heimdallPath[heimdallPath.length() - 1] != QDir::separator())
+ heimdallPath += QDir::separator();
+
+ heimdallPath += "heimdall";
+
+ heimdallProcess.start(heimdallPath, QStringList("version"));
+ heimdallProcess.waitForFinished(350);
+ }
+ }
+
+ if (heimdallFailed)
+ versionCopyrightLabel->setText(versionCopyrightLabel->text().replace("%HEIMDALL-VERSION%", ""));
+ }
+}
+
+void AboutForm::HandleHeimdallStdout(void)
+{
+ QString version = heimdallProcess.readAll();
+
+ if (version.length() > 0)
+ {
+ if (version.at(0) == QChar('v'))
+ version = version.mid(1);
+
+ versionCopyrightLabel->setText(versionCopyrightLabel->text().replace("%HEIMDALL-VERSION%", "Version " + version + "<br />"));
+ }
+}
+
+void AboutForm::HandleHeimdallReturned(int exitCode, QProcess::ExitStatus exitStatus)
+{
+ UNUSED(exitCode);
+ UNUSED(exitStatus);
+
+ // If for some reason %HEIMDALL-VERSION% hasn't been replaced yet, we'll replace it with an empty string.
+ versionCopyrightLabel->setText(versionCopyrightLabel->text().replace("%HEIMDALL-VERSION%", ""));
+}
+
+void AboutForm::HandleHeimdallError(QProcess::ProcessError error)
+{
+ UNUSED(error);
+
+ heimdallFailed = true;
+}
+
diff --git a/heimdall-frontend/Source/aboutform.h b/heimdall-frontend/source/aboutform.h
index 4b6a8e3..3f5d715 100644
--- a/heimdall-frontend/Source/aboutform.h
+++ b/heimdall-frontend/source/aboutform.h
@@ -1,58 +1,58 @@
-/* Copyright (c) 2010-2014 Benjamin Dobell, Glass Echidna
-
- Permission is hereby granted, free of charge, to any person obtaining a copy
- of this software and associated documentation files (the "Software"), to deal
- in the Software without restriction, including without limitation the rights
- to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- copies of the Software, and to permit persons to whom the Software is
- furnished to do so, subject to the following conditions:
-
- The above copyright notice and this permission notice shall be included in
- all copies or substantial portions of the Software.
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- THE SOFTWARE.*/
-
-#ifndef ABOUTFORM_H
-#define ABOUTFORM_H
-
-// Qt
-#include <QProcess>
-#include <QWidget>
-
-// Heimdall Frontend
-#include "ui_aboutform.h"
-
-namespace HeimdallFrontend
-{
- class AboutForm : public QWidget, public Ui::AboutForm
- {
- Q_OBJECT
-
- private:
-
- bool heimdallFailed;
- QProcess heimdallProcess;
-
- void RetrieveHeimdallVersion(void);
-
- public:
-
- explicit AboutForm(QWidget *parent = 0);
-
- public slots:
-
- // Heimdall Command Line
- void HandleHeimdallStdout(void);
- void HandleHeimdallReturned(int exitCode, QProcess::ExitStatus exitStatus);
- void HandleHeimdallError(QProcess::ProcessError error);
- };
-}
-
-#endif
-
+/* Copyright (c) 2010-2014 Benjamin Dobell, Glass Echidna
+
+ Permission is hereby granted, free of charge, to any person obtaining a copy
+ of this software and associated documentation files (the "Software"), to deal
+ in the Software without restriction, including without limitation the rights
+ to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ copies of the Software, and to permit persons to whom the Software is
+ furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be included in
+ all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ THE SOFTWARE.*/
+
+#ifndef ABOUTFORM_H
+#define ABOUTFORM_H
+
+// Qt
+#include <QProcess>
+#include <QWidget>
+
+// Heimdall Frontend
+#include "ui_aboutform.h"
+
+namespace HeimdallFrontend
+{
+ class AboutForm : public QWidget, public Ui::AboutForm
+ {
+ Q_OBJECT
+
+ private:
+
+ bool heimdallFailed;
+ QProcess heimdallProcess;
+
+ void RetrieveHeimdallVersion(void);
+
+ public:
+
+ explicit AboutForm(QWidget *parent = 0);
+
+ public slots:
+
+ // Heimdall Command Line
+ void HandleHeimdallStdout(void);
+ void HandleHeimdallReturned(int exitCode, QProcess::ExitStatus exitStatus);
+ void HandleHeimdallError(QProcess::ProcessError error);
+ };
+}
+
+#endif
+
diff --git a/heimdall-frontend/Source/main.cpp b/heimdall-frontend/source/main.cpp
index c327b63..c327b63 100644
--- a/heimdall-frontend/Source/main.cpp
+++ b/heimdall-frontend/source/main.cpp
diff --git a/heimdall-frontend/Source/mainwindow.cpp b/heimdall-frontend/source/mainwindow.cpp
index 74d9500..94321b3 100644
--- a/heimdall-frontend/Source/mainwindow.cpp
+++ b/heimdall-frontend/source/mainwindow.cpp
@@ -1,1375 +1,1375 @@
-/* Copyright (c) 2010-2014 Benjamin Dobell, Glass Echidna
-
- Permission is hereby granted, free of charge, to any person obtaining a copy
- of this software and associated documentation files (the "Software"), to deal
- in the Software without restriction, including without limitation the rights
- to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- copies of the Software, and to permit persons to whom the Software is
- furnished to do so, subject to the following conditions:
-
- The above copyright notice and this permission notice shall be included in
- all copies or substantial portions of the Software.
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- THE SOFTWARE.*/
-
-// Qt
-#include <QCoreApplication>
-#include <QDesktopServices>
-#include <QDir>
-#include <QFileDialog>
-#include <QProcess>
-#include <QRegExp>
-#include <QUrl>
-
-// Heimdall Frontend
-#include "Alerts.h"
-#include "mainwindow.h"
-#include "Packaging.h"
-
-#define UNUSED(x) (void)(x)
-
-using namespace HeimdallFrontend;
-
-void MainWindow::StartHeimdall(const QStringList& arguments)
-{
- UpdateInterfaceAvailability();
-
- heimdallProcess.setReadChannel(QProcess::StandardOutput);
-
- heimdallProcess.start("heimdall", arguments);
- heimdallProcess.waitForStarted(3000);
-
- // OS X was playing up and not finding heimdall, so we're manually checking the PATH.
- if (heimdallFailed)
- {
- QStringList environment = QProcess::systemEnvironment();
-
- QStringList paths;
-
- // Ensure /usr/local/bin and /usr/bin are in PATH.
- for (int i = 0; i < environment.length(); i++)
- {
- if (environment[i].left(5) == "PATH=")
- {
- paths = environment[i].mid(5).split(':');
-
- if (!paths.contains("/usr/local/bin"))
- paths.prepend("/usr/local/bin");
-
- if (!paths.contains("/usr/bin"))
- paths.prepend("/usr/bin");
-
- break;
- }
- }
-
- int pathIndex = -1;
-
- while (heimdallFailed && ++pathIndex < paths.length())
- {
- QString heimdallPath = paths[pathIndex];
-
- if (heimdallPath.length() > 0)
- {
- utilityOutputPlainTextEdit->clear();
- heimdallFailed = false;
-
- if (heimdallPath[heimdallPath.length() - 1] != QDir::separator())
- heimdallPath += QDir::separator();
-
- heimdallPath += "heimdall";
-
- heimdallProcess.start(heimdallPath, arguments);
- heimdallProcess.waitForStarted(3000);
- }
- }
-
- if (heimdallFailed)
- {
- flashLabel->setText("Failed to start Heimdall!");
-
- heimdallState = HeimdallState::Stopped;
- UpdateInterfaceAvailability();
- }
- }
-}
-
-void MainWindow::UpdateUnusedPartitionIds(void)
-{
- unusedPartitionIds.clear();
-
- // Initially populate unusedPartitionIds with all possible partition IDs.
- for (unsigned int i = 0; i < currentPitData.GetEntryCount(); i++)
- {
- const PitEntry *pitEntry = currentPitData.GetEntry(i);
-
- if (pitEntry->IsFlashable() && strcmp(pitEntry->GetPartitionName(), "PIT") != 0 && strcmp(pitEntry->GetPartitionName(), "PT") != 0)
- unusedPartitionIds.append(pitEntry->GetIdentifier());
- }
-
- // Remove any used partition IDs from unusedPartitionIds
- QList<FileInfo>& fileList = workingPackageData.GetFirmwareInfo().GetFileInfos();
-
- for (int i = 0; i < fileList.length(); i++)
- unusedPartitionIds.removeOne(fileList[i].GetPartitionId());
-}
-
-bool MainWindow::ReadPit(QFile *file)
-{
- if(!file->open(QIODevice::ReadOnly))
- return (false);
-
- unsigned char *buffer = new unsigned char[file->size()];
-
- file->read(reinterpret_cast<char *>(buffer), file->size());
- file->close();
-
- bool success = currentPitData.Unpack(buffer);
- delete buffer;
-
- if (!success)
- currentPitData.Clear();
-
- return (success);
-}
-
-void MainWindow::UpdatePackageUserInterface(void)
-{
- supportedDevicesListWidget->clear();
- includedFilesListWidget->clear();
-
- if (loadedPackageData.IsCleared())
- {
- // Package Interface
- firmwareNameLineEdit->clear();
- versionLineEdit->clear();
-
- developerNamesLineEdit->clear();
-
- platformLineEdit->clear();
-
- repartitionRadioButton->setChecked(false);
- noRebootRadioButton->setChecked(false);
- }
- else
- {
- firmwareNameLineEdit->setText(loadedPackageData.GetFirmwareInfo().GetName());
- versionLineEdit->setText(loadedPackageData.GetFirmwareInfo().GetVersion());
-
- QString developerNames;
-
- if (!loadedPackageData.GetFirmwareInfo().GetDevelopers().isEmpty())
- {
- developerNames = loadedPackageData.GetFirmwareInfo().GetDevelopers()[0];
- for (int i = 1; i < loadedPackageData.GetFirmwareInfo().GetDevelopers().length(); i++)
- developerNames += ", " + loadedPackageData.GetFirmwareInfo().GetDevelopers()[i];
- }
-
- developerNamesLineEdit->setText(developerNames);
-
- platformLineEdit->setText(loadedPackageData.GetFirmwareInfo().GetPlatformInfo().GetName() + " ("
- + loadedPackageData.GetFirmwareInfo().GetPlatformInfo().GetVersion() + ")");
-
- for (int i = 0; i < loadedPackageData.GetFirmwareInfo().GetDeviceInfos().length(); i++)
- {
- const DeviceInfo& deviceInfo = loadedPackageData.GetFirmwareInfo().GetDeviceInfos()[i];
- supportedDevicesListWidget->addItem(deviceInfo.GetManufacturer() + " " + deviceInfo.GetName() + ": " + deviceInfo.GetProduct());
- }
-
- for (int i = 0; i < loadedPackageData.GetFirmwareInfo().GetFileInfos().length(); i++)
- {
- const FileInfo& fileInfo = loadedPackageData.GetFirmwareInfo().GetFileInfos()[i];
- includedFilesListWidget->addItem(fileInfo.GetFilename());
- }
-
- repartitionRadioButton->setChecked(loadedPackageData.GetFirmwareInfo().GetRepartition());
- noRebootRadioButton->setChecked(loadedPackageData.GetFirmwareInfo().GetNoReboot());
- }
-
- UpdateLoadPackageInterfaceAvailability();
-}
-
-bool MainWindow::IsArchive(QString path)
-{
- // Not a real check but hopefully it gets the message across, don't directly flash archives!
- return (path.endsWith(".tar", Qt::CaseInsensitive) || path.endsWith(".gz", Qt::CaseInsensitive) || path.endsWith(".zip", Qt::CaseInsensitive)
- || path.endsWith(".bz2", Qt::CaseInsensitive) || path.endsWith(".7z", Qt::CaseInsensitive) || path.endsWith(".rar", Qt::CaseInsensitive));
-}
-
-QString MainWindow::PromptFileSelection(const QString& caption, const QString& filter)
-{
- QString path = QFileDialog::getOpenFileName(this, caption, lastDirectory, filter);
-
- if (path != "")
- lastDirectory = path.left(path.lastIndexOf('/') + 1);
-
- return (path);
-}
-
-QString MainWindow::PromptFileCreation(const QString& caption, const QString& filter)
-{
- QString path = QFileDialog::getSaveFileName(this, caption, lastDirectory, filter);
-
- if (path != "")
- lastDirectory = path.left(path.lastIndexOf('/') + 1);
-
- return (path);
-}
-
-void MainWindow::UpdateLoadPackageInterfaceAvailability(void)
-{
- if (loadedPackageData.IsCleared())
- {
- developerHomepageButton->setEnabled(false);
- developerDonateButton->setEnabled(false);
-
- loadFirmwareButton->setEnabled(false);
- }
- else
- {
- if (!loadedPackageData.GetFirmwareInfo().GetUrl().isEmpty())
- developerHomepageButton->setEnabled(true);
- else
- developerHomepageButton->setEnabled(false);
-
- if (!loadedPackageData.GetFirmwareInfo().GetDonateUrl().isEmpty())
- developerDonateButton->setEnabled(true);
- else
- developerDonateButton->setEnabled(false);
-
- loadFirmwareButton->setEnabled(heimdallState == HeimdallState::Stopped);
- }
-}
-
-void MainWindow::UpdateFlashInterfaceAvailability(void)
-{
- if (heimdallState == HeimdallState::Stopped)
- {
- partitionNameComboBox->setEnabled(partitionsListWidget->currentRow() >= 0);
-
- bool allPartitionsValid = true;
- QList<FileInfo>& fileList = workingPackageData.GetFirmwareInfo().GetFileInfos();
-
- for (int i = 0; i < fileList.length(); i++)
- {
- if (fileList[i].GetFilename().isEmpty())
- {
- allPartitionsValid = false;
- break;
- }
- }
-
- bool validFlashSettings = allPartitionsValid && fileList.length() > 0;
-
- flashProgressBar->setEnabled(false);
- optionsGroup->setEnabled(true);
- sessionGroup->setEnabled(true);
- startFlashButton->setEnabled(validFlashSettings);
- noRebootCheckBox->setEnabled(validFlashSettings);
- resumeCheckbox->setEnabled(validFlashSettings);
- }
- else
- {
- partitionNameComboBox->setEnabled(false);
-
- flashProgressBar->setEnabled(true);
- optionsGroup->setEnabled(false);
- sessionGroup->setEnabled(false);
- }
-}
-
-void MainWindow::UpdateCreatePackageInterfaceAvailability(void)
-{
- if (heimdallState == HeimdallState::Stopped)
- {
- const FirmwareInfo& firmwareInfo = workingPackageData.GetFirmwareInfo();
-
- if (firmwareInfo.GetName().isEmpty() || firmwareInfo.GetVersion().isEmpty() || firmwareInfo.GetPlatformInfo().GetName().isEmpty()
- || firmwareInfo.GetPlatformInfo().GetVersion().isEmpty() || firmwareInfo.GetDevelopers().isEmpty() || firmwareInfo.GetDeviceInfos().isEmpty())
- {
- buildPackageButton->setEnabled(false);
- }
- else
- {
- buildPackageButton->setEnabled(true);
- }
-
- if (addDeveloperButton->text().isEmpty())
- addDeveloperButton->setEnabled(false);
- else
- addDeveloperButton->setEnabled(true);
-
- if (createDevelopersListWidget->currentRow() >= 0)
- removeDeveloperButton->setEnabled(true);
- else
- removeDeveloperButton->setEnabled(false);
- }
- else
- {
- buildPackageButton->setEnabled(false);
- }
-}
-
-void MainWindow::UpdateUtilitiesInterfaceAvailability(void)
-{
- if (heimdallState == HeimdallState::Stopped)
- {
- detectDeviceButton->setEnabled(true);
- closePcScreenButton->setEnabled(true);
- pitSaveAsButton->setEnabled(true);
-
- downloadPitButton->setEnabled(!pitDestinationLineEdit->text().isEmpty());
-
- if (printPitDeviceRadioBox->isChecked())
- {
- // Device
- printLocalPitGroup->setEnabled(false);
- printPitButton->setEnabled(true);
- }
- else
- {
- // Local File
- printLocalPitGroup->setEnabled(true);
- printLocalPitLineEdit->setEnabled(true);
- printLocalPitBrowseButton->setEnabled(true);
-
- printPitButton->setEnabled(!printLocalPitLineEdit->text().isEmpty());
- }
- }
- else
- {
- detectDeviceButton->setEnabled(false);
- closePcScreenButton->setEnabled(false);
- pitSaveAsButton->setEnabled(false);
- downloadPitButton->setEnabled(false);
-
- printLocalPitGroup->setEnabled(false);
- printPitButton->setEnabled(false);
- }
-}
-
-void MainWindow::UpdateInterfaceAvailability(void)
-{
- UpdateLoadPackageInterfaceAvailability();
- UpdateFlashInterfaceAvailability();
- UpdateCreatePackageInterfaceAvailability();
- UpdateUtilitiesInterfaceAvailability();
-
- if (heimdallState == HeimdallState::Stopped)
- {
- // Enable/disable tabs
-
- for (int i = 0; i < functionTabWidget->count(); i++)
- functionTabWidget->setTabEnabled(i, true);
-
- functionTabWidget->setTabEnabled(functionTabWidget->indexOf(createPackageTab), startFlashButton->isEnabled());
- }
- else
- {
- // Disable non-current tabs
-
- for (int i = 0; i < functionTabWidget->count(); i++)
- {
- if (i == functionTabWidget->currentIndex())
- functionTabWidget->setTabEnabled(i, true);
- else
- functionTabWidget->setTabEnabled(i, false);
- }
- }
-}
-
-void MainWindow::UpdatePartitionNamesInterface(void)
-{
- populatingPartitionNames = true;
-
- partitionNameComboBox->clear();
-
- int partitionsListWidgetRow = partitionsListWidget->currentRow();
-
- if (partitionsListWidgetRow >= 0)
- {
- const FileInfo& partitionInfo = workingPackageData.GetFirmwareInfo().GetFileInfos()[partitionsListWidget->currentRow()];
-
- for (int i = 0; i < unusedPartitionIds.length(); i++)
- partitionNameComboBox->addItem(currentPitData.FindEntry(unusedPartitionIds[i])->GetPartitionName());
-
- partitionNameComboBox->addItem(currentPitData.FindEntry(partitionInfo.GetPartitionId())->GetPartitionName());
- partitionNameComboBox->setCurrentIndex(unusedPartitionIds.length());
- }
-
- populatingPartitionNames = false;
-
- UpdateFlashInterfaceAvailability();
-}
-
-MainWindow::MainWindow(QWidget *parent) : QMainWindow(parent)
-{
- setupUi(this);
-
- heimdallState = HeimdallState::Stopped;
-
- lastDirectory = QDir::toNativeSeparators(QApplication::applicationDirPath());
-
- populatingPartitionNames = false;
-
- verboseOutput = false;
- resume = false;
-
- tabIndex = functionTabWidget->currentIndex();
- functionTabWidget->setTabEnabled(functionTabWidget->indexOf(createPackageTab), false);
-
- QObject::connect(functionTabWidget, SIGNAL(currentChanged(int)), this, SLOT(FunctionTabChanged(int)));
-
- // Menu
- QObject::connect(actionDonate, SIGNAL(triggered()), this, SLOT(OpenDonationWebpage()));
- QObject::connect(actionVerboseOutput, SIGNAL(toggled(bool)), this, SLOT(SetVerboseOutput(bool)));
- QObject::connect(actionResumeConnection, SIGNAL(toggled(bool)), this, SLOT(SetResume(bool)));
- QObject::connect(actionAboutHeimdall, SIGNAL(triggered()), this, SLOT(ShowAbout()));
-
- // Load Package Tab
- QObject::connect(browseFirmwarePackageButton, SIGNAL(clicked()), this, SLOT(SelectFirmwarePackage()));
- QObject::connect(developerHomepageButton, SIGNAL(clicked()), this, SLOT(OpenDeveloperHomepage()));
- QObject::connect(developerDonateButton, SIGNAL(clicked()), this, SLOT(OpenDeveloperDonationWebpage()));
- QObject::connect(loadFirmwareButton, SIGNAL(clicked()), this, SLOT(LoadFirmwarePackage()));
-
- QObject::connect(partitionsListWidget, SIGNAL(currentRowChanged(int)), this, SLOT(SelectPartition(int)));
- QObject::connect(addPartitionButton, SIGNAL(clicked()), this, SLOT(AddPartition()));
- QObject::connect(removePartitionButton, SIGNAL(clicked()), this, SLOT(RemovePartition()));
-
- // Flash Tab
- QObject::connect(partitionNameComboBox, SIGNAL(currentIndexChanged(int)), this, SLOT(SelectPartitionName(int)));
- QObject::connect(partitionFileBrowseButton, SIGNAL(clicked()), this, SLOT(SelectPartitionFile()));
-
- QObject::connect(pitBrowseButton, SIGNAL(clicked()), this, SLOT(SelectPit()));
-
- QObject::connect(repartitionCheckBox, SIGNAL(stateChanged(int)), this, SLOT(SetRepartition(int)));
-
- QObject::connect(noRebootCheckBox, SIGNAL(stateChanged(int)), this, SLOT(SetNoReboot(int)));
- QObject::connect(resumeCheckbox, SIGNAL(stateChanged(int)), this, SLOT(SetResume(int)));
-
- QObject::connect(startFlashButton, SIGNAL(clicked()), this, SLOT(StartFlash()));
-
- // Create Package Tab
- QObject::connect(createFirmwareNameLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(FirmwareNameChanged(const QString&)));
- QObject::connect(createFirmwareVersionLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(FirmwareVersionChanged(const QString&)));
- QObject::connect(createPlatformNameLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(PlatformNameChanged(const QString&)));
- QObject::connect(createPlatformVersionLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(PlatformVersionChanged(const QString&)));
-
- QObject::connect(createHomepageLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(HomepageUrlChanged(const QString&)));
- QObject::connect(createDonateLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(DonateUrlChanged(const QString&)));
-
- QObject::connect(createDevelopersListWidget, SIGNAL(currentRowChanged(int)), this, SLOT(SelectDeveloper(int)));
- QObject::connect(createDeveloperNameLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(DeveloperNameChanged(const QString&)));
- QObject::connect(addDeveloperButton, SIGNAL(clicked()), this, SLOT(AddDeveloper()));
- QObject::connect(removeDeveloperButton, SIGNAL(clicked()), this, SLOT(RemoveDeveloper()));
-
- QObject::connect(createDevicesListWidget, SIGNAL(currentRowChanged(int)), this, SLOT(SelectDevice(int)));
- QObject::connect(deviceManufacturerLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(DeviceInfoChanged(const QString&)));
- QObject::connect(deviceNameLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(DeviceInfoChanged(const QString&)));
- QObject::connect(deviceProductCodeLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(DeviceInfoChanged(const QString&)));
- QObject::connect(addDeviceButton, SIGNAL(clicked()), this, SLOT(AddDevice()));
- QObject::connect(removeDeviceButton, SIGNAL(clicked()), this, SLOT(RemoveDevice()));
-
- QObject::connect(buildPackageButton, SIGNAL(clicked()), this, SLOT(BuildPackage()));
-
- // Utilities Tab
- QObject::connect(detectDeviceButton, SIGNAL(clicked()), this, SLOT(DetectDevice()));
-
- QObject::connect(closePcScreenButton, SIGNAL(clicked()), this, SLOT(ClosePcScreen()));
-
- QObject::connect(printPitDeviceRadioBox, SIGNAL(toggled(bool)), this, SLOT(DevicePrintPitToggled(bool)));
- QObject::connect(printPitLocalFileRadioBox, SIGNAL(toggled(bool)), this, SLOT(LocalFilePrintPitToggled(bool)));
- QObject::connect(printLocalPitBrowseButton, SIGNAL(clicked()), this, SLOT(SelectPrintPitFile()));
- QObject::connect(printPitButton, SIGNAL(clicked()), this, SLOT(PrintPit()));
-
- QObject::connect(pitSaveAsButton, SIGNAL(clicked()), this, SLOT(SelectPitDestination()));
- QObject::connect(downloadPitButton, SIGNAL(clicked()), this, SLOT(DownloadPit()));
-
- // Heimdall Command Line
- QObject::connect(&heimdallProcess, SIGNAL(readyRead()), this, SLOT(HandleHeimdallStdout()));
- QObject::connect(&heimdallProcess, SIGNAL(finished(int, QProcess::ExitStatus)), this, SLOT(HandleHeimdallReturned(int, QProcess::ExitStatus)));
- QObject::connect(&heimdallProcess, SIGNAL(error(QProcess::ProcessError)), this, SLOT(HandleHeimdallError(QProcess::ProcessError)));
-}
-
-MainWindow::~MainWindow()
-{
-}
-
-void MainWindow::OpenDonationWebpage(void)
-{
- QDesktopServices::openUrl(QUrl("http://www.glassechidna.com.au/donate/", QUrl::StrictMode));
-}
-
-void MainWindow::SetVerboseOutput(bool enabled)
-{
- verboseOutput = enabled;
-}
-
-void MainWindow::ShowAbout(void)
-{
- aboutForm.show();
-}
-
-void MainWindow::FunctionTabChanged(int index)
-{
- tabIndex = index;
- deviceDetectedRadioButton->setChecked(false);
-}
-
-void MainWindow::SelectFirmwarePackage(void)
-{
- loadedPackageData.Clear();
- UpdatePackageUserInterface();
-
- QString path = PromptFileSelection("Select Package", "*.tar.gz");
- firmwarePackageLineEdit->setText(path);
-
- if (firmwarePackageLineEdit->text() != "")
- {
- if (Packaging::ExtractPackage(firmwarePackageLineEdit->text(), &loadedPackageData))
- UpdatePackageUserInterface();
- else
- loadedPackageData.Clear();
- }
-}
-
-void MainWindow::OpenDeveloperHomepage(void)
-{
- if(!QDesktopServices::openUrl(QUrl(loadedPackageData.GetFirmwareInfo().GetUrl(), QUrl::TolerantMode)))
- Alerts::DisplayWarning(QString("Cannot open invalid URL:\n%1").arg(loadedPackageData.GetFirmwareInfo().GetUrl()));
-}
-
-void MainWindow::OpenDeveloperDonationWebpage(void)
-{
- if (!QDesktopServices::openUrl(QUrl(loadedPackageData.GetFirmwareInfo().GetDonateUrl(), QUrl::TolerantMode)))
- Alerts::DisplayWarning(QString("Cannot open invalid URL:\n%1").arg(loadedPackageData.GetFirmwareInfo().GetDonateUrl()));
-}
-
-void MainWindow::LoadFirmwarePackage(void)
-{
- workingPackageData.Clear();
- currentPitData.Clear();
-
- workingPackageData.GetFiles().append(loadedPackageData.GetFiles());
- loadedPackageData.RemoveAllFiles();
-
- const QList<FileInfo> packageFileInfos = loadedPackageData.GetFirmwareInfo().GetFileInfos();
-
- for (int i = 0; i < packageFileInfos.length(); i++)
- {
- bool fileFound = false;
-
- for (int j = 0; j < workingPackageData.GetFiles().length(); j++)
- {
- if (workingPackageData.GetFiles()[j]->fileTemplate() == ("XXXXXX-" + packageFileInfos[i].GetFilename()))
- {
- FileInfo partitionInfo(packageFileInfos[i].GetPartitionId(), QDir::current().absoluteFilePath(workingPackageData.GetFiles()[j]->fileName()));
- workingPackageData.GetFirmwareInfo().GetFileInfos().append(partitionInfo);
-
- fileFound = true;
- break;
- }
- }
-
- if (!fileFound)
- Alerts::DisplayWarning(QString("%1 is missing from the package.").arg(packageFileInfos[i].GetFilename()));
- }
-
- // Find the PIT file and read it
- for (int i = 0; i < workingPackageData.GetFiles().length(); i++)
- {
- QTemporaryFile *file = workingPackageData.GetFiles()[i];
-
- if (file->fileTemplate() == ("XXXXXX-" + loadedPackageData.GetFirmwareInfo().GetPitFilename()))
- {
- workingPackageData.GetFirmwareInfo().SetPitFilename(QDir::current().absoluteFilePath(file->fileName()));
-
- if (!ReadPit(file))
- {
- Alerts::DisplayError("Failed to read PIT file.");
-
- loadedPackageData.Clear();
- UpdatePackageUserInterface();
-
- workingPackageData.Clear();
- UpdateUnusedPartitionIds();
- return;
- }
-
- break;
- }
- }
-
- UpdateUnusedPartitionIds();
- workingPackageData.GetFirmwareInfo().SetRepartition(loadedPackageData.GetFirmwareInfo().GetRepartition());
- workingPackageData.GetFirmwareInfo().SetNoReboot(loadedPackageData.GetFirmwareInfo().GetNoReboot());
-
- loadedPackageData.Clear();
- UpdatePackageUserInterface();
- firmwarePackageLineEdit->clear();
-
- partitionsListWidget->clear();
-
- // Populate partitionsListWidget with partition names (from the PIT file)
- for (int i = 0; i < workingPackageData.GetFirmwareInfo().GetFileInfos().length(); i++)
- {
- const FileInfo& partitionInfo = workingPackageData.GetFirmwareInfo().GetFileInfos()[i];
-
- const PitEntry *pitEntry = currentPitData.FindEntry(partitionInfo.GetPartitionId());
-
- if (pitEntry)
- {
- partitionsListWidget->addItem(pitEntry->GetPartitionName());
- }
- else
- {
- Alerts::DisplayError("Firmware package includes invalid partition IDs.");
-
- loadedPackageData.GetFirmwareInfo().Clear();
- currentPitData.Clear();
- UpdateUnusedPartitionIds();
-
- partitionsListWidget->clear();
- return;
- }
- }
-
- partitionNameComboBox->clear();
- partitionIdLineEdit->clear();
- partitionFileLineEdit->clear();
- partitionFileBrowseButton->setEnabled(false);
-
- repartitionCheckBox->setEnabled(true);
- repartitionCheckBox->setChecked(workingPackageData.GetFirmwareInfo().GetRepartition());
- noRebootCheckBox->setEnabled(true);
- noRebootCheckBox->setChecked(workingPackageData.GetFirmwareInfo().GetNoReboot());
-
- partitionsListWidget->setEnabled(true);
- addPartitionButton->setEnabled(true);
- removePartitionButton->setEnabled(true && partitionsListWidget->currentRow() >= 0);
-
- pitLineEdit->setText(workingPackageData.GetFirmwareInfo().GetPitFilename());
-
- functionTabWidget->setCurrentWidget(flashTab);
-
- UpdateInterfaceAvailability();
-}
-
-void MainWindow::SelectPartitionName(int index)
-{
- if (!populatingPartitionNames && index != -1 && index != unusedPartitionIds.length())
- {
- unsigned int newPartitionIndex = unusedPartitionIds[index];
- unusedPartitionIds.removeAt(index);
-
- FileInfo& fileInfo = workingPackageData.GetFirmwareInfo().GetFileInfos()[partitionsListWidget->currentRow()];
- unusedPartitionIds.append(fileInfo.GetPartitionId());
- fileInfo.SetPartitionId(newPartitionIndex);
-
- PitEntry *pitEntry = currentPitData.FindEntry(newPartitionIndex);
-
- QString title("File");
-
- if (pitEntry && strlen(pitEntry->GetFlashFilename()) > 0)
- title += " (" + QString(pitEntry->GetFlashFilename()) + ")";
-
- partitionFileGroup->setTitle(title);
-
- if (!fileInfo.GetFilename().isEmpty())
- {
- QString partitionFilename = pitEntry->GetFlashFilename();
- int lastPeriod = partitionFilename.lastIndexOf(QChar('.'));
-
- if (lastPeriod >= 0)
- {
- QString partitionFileExtension = partitionFilename.mid(lastPeriod + 1);
-
- lastPeriod = fileInfo.GetFilename().lastIndexOf(QChar('.'));
-
- if (lastPeriod < 0 || fileInfo.GetFilename().mid(lastPeriod + 1) != partitionFileExtension)
- Alerts::DisplayWarning(QString("%1 partition expects files with file extension \"%2\".").arg(pitEntry->GetPartitionName(), partitionFileExtension));
- }
- }
-
- partitionNameComboBox->clear();
-
- // Update interface
- UpdatePartitionNamesInterface();
- partitionIdLineEdit->setText(QString::number(newPartitionIndex));
- partitionsListWidget->currentItem()->setText(currentPitData.FindEntry(newPartitionIndex)->GetPartitionName());
- }
-}
-
-void MainWindow::SelectPartitionFile(void)
-{
- QString path = PromptFileSelection();
-
- if (path != "")
- {
- FileInfo& fileInfo = workingPackageData.GetFirmwareInfo().GetFileInfos()[partitionsListWidget->currentRow()];
- PitEntry *pitEntry = currentPitData.FindEntry(fileInfo.GetPartitionId());
-
- QString partitionFilename = pitEntry->GetFlashFilename();
- int lastPeriod = partitionFilename.lastIndexOf(QChar('.'));
-
- if (lastPeriod >= 0)
- {
- QString partitionFileExtension = partitionFilename.mid(lastPeriod + 1);
-
- lastPeriod = path.lastIndexOf(QChar('.'));
-
- if (lastPeriod < 0 || path.mid(lastPeriod + 1) != partitionFileExtension)
- Alerts::DisplayWarning(QString("%1 partition expects files with file extension \"%2\".").arg(pitEntry->GetPartitionName(), partitionFileExtension));
- }
-
- fileInfo.SetFilename(path);
- partitionFileLineEdit->setText(path);
-
- pitBrowseButton->setEnabled(true);
- partitionsListWidget->setEnabled(true);
- UpdateInterfaceAvailability();
-
- if (unusedPartitionIds.length() > 0)
- addPartitionButton->setEnabled(true);
- }
-}
-
-void MainWindow::SelectPartition(int row)
-{
- if (row >= 0)
- {
- const FileInfo& partitionInfo = workingPackageData.GetFirmwareInfo().GetFileInfos()[row];
-
- UpdatePartitionNamesInterface();
-
- partitionIdLineEdit->setText(QString::number(partitionInfo.GetPartitionId()));
- partitionFileLineEdit->setText(partitionInfo.GetFilename());
- partitionFileBrowseButton->setEnabled(true);
-
- removePartitionButton->setEnabled(true);
-
- QString title("File");
-
- PitEntry *pitEntry = currentPitData.FindEntry(partitionInfo.GetPartitionId());
-
- if (pitEntry && strlen(pitEntry->GetFlashFilename()) > 0)
- title += " (" + QString(pitEntry->GetFlashFilename()) + ")";
-
- partitionFileGroup->setTitle(title);
- }
- else
- {
- UpdatePartitionNamesInterface();
-
- partitionIdLineEdit->clear();
- partitionFileLineEdit->clear();
- partitionFileBrowseButton->setEnabled(false);
-
- removePartitionButton->setEnabled(false);
-
- partitionFileGroup->setTitle("File");
- }
-}
-
-void MainWindow::AddPartition(void)
-{
- FileInfo partitionInfo(unusedPartitionIds.first(), "");
- workingPackageData.GetFirmwareInfo().GetFileInfos().append(partitionInfo);
- UpdateUnusedPartitionIds();
-
- pitBrowseButton->setEnabled(false);
- addPartitionButton->setEnabled(false);
-
- partitionsListWidget->addItem(currentPitData.FindEntry(partitionInfo.GetPartitionId())->GetPartitionName());
- partitionsListWidget->setCurrentRow(partitionsListWidget->count() - 1);
- partitionsListWidget->setEnabled(false);
-
- UpdateInterfaceAvailability();
-}
-
-void MainWindow::RemovePartition(void)
-{
- workingPackageData.GetFirmwareInfo().GetFileInfos().removeAt(partitionsListWidget->currentRow());
- UpdateUnusedPartitionIds();
-
- QListWidgetItem *item = partitionsListWidget->currentItem();
- partitionsListWidget->setCurrentRow(-1);
- delete item;
-
- pitBrowseButton->setEnabled(true);
- addPartitionButton->setEnabled(true);
- partitionsListWidget->setEnabled(true);
- UpdateInterfaceAvailability();
-}
-
-void MainWindow::SelectPit(void)
-{
- QString path = PromptFileSelection("Select PIT", "*.pit");
- bool validPit = path != "";
-
- if (validPit)
- {
- // In order to map files in the old PIT to file in the new one, we first must use partition names instead of IDs.
- QList<FileInfo> fileInfos = workingPackageData.GetFirmwareInfo().GetFileInfos();
-
- int partitionNamesCount = fileInfos.length();
- QString *partitionNames = new QString[fileInfos.length()];
- for (int i = 0; i < fileInfos.length(); i++)
- partitionNames[i] = currentPitData.FindEntry(fileInfos[i].GetPartitionId())->GetPartitionName();
-
- currentPitData.Clear();
-
- QFile pitFile(path);
-
- if (ReadPit(&pitFile))
- {
- workingPackageData.GetFirmwareInfo().SetPitFilename(path);
-
- partitionsListWidget->clear();
- int partitionInfoIndex = 0;
-
- for (int i = 0; i < partitionNamesCount; i++)
- {
- const PitEntry *pitEntry = currentPitData.FindEntry(partitionNames[i].toLatin1().constData());
-
- if (pitEntry)
- {
- fileInfos[partitionInfoIndex++].SetPartitionId(pitEntry->GetIdentifier());
- partitionsListWidget->addItem(pitEntry->GetPartitionName());
- }
- else
- {
- fileInfos.removeAt(partitionInfoIndex);
- }
- }
- }
- else
- {
- validPit = false;
- }
-
- // If the selected PIT was invalid, attempt to reload the old one.
- if (!validPit)
- {
- Alerts::DisplayError("The file selected was not a valid PIT file.");
-
- if (!workingPackageData.GetFirmwareInfo().GetPitFilename().isEmpty())
- {
- QFile originalPitFile(workingPackageData.GetFirmwareInfo().GetPitFilename());
-
- if (ReadPit(&originalPitFile))
- {
- validPit = true;
- }
- else
- {
- Alerts::DisplayError("Failed to reload working PIT data.");
-
- workingPackageData.Clear();
- partitionsListWidget->clear();
- }
- }
- }
-
- UpdateUnusedPartitionIds();
-
- delete [] partitionNames;
-
- pitLineEdit->setText(workingPackageData.GetFirmwareInfo().GetPitFilename());
-
- repartitionCheckBox->setEnabled(validPit);
- noRebootCheckBox->setEnabled(validPit);
- partitionsListWidget->setEnabled(validPit);
-
- addPartitionButton->setEnabled(validPit);
- removePartitionButton->setEnabled(validPit && partitionsListWidget->currentRow() >= 0);
-
- UpdateInterfaceAvailability();
- }
-}
-
-
-void MainWindow::SetRepartition(int enabled)
-{
- workingPackageData.GetFirmwareInfo().SetRepartition(enabled);
-
- repartitionCheckBox->setChecked(enabled);
-}
-
-void MainWindow::SetNoReboot(int enabled)
-{
- workingPackageData.GetFirmwareInfo().SetNoReboot(enabled);
-
- noRebootCheckBox->setChecked(enabled);
-}
-
-void MainWindow::SetResume(bool enabled)
-{
- resume = enabled;
-
- actionResumeConnection->setChecked(enabled);
- resumeCheckbox->setChecked(enabled);
-}
-
-void MainWindow::SetResume(int enabled)
-{
- SetResume(enabled != 0);
-}
-
-void MainWindow::StartFlash(void)
-{
- outputPlainTextEdit->clear();
-
- heimdallState = HeimdallState::Flashing;
- heimdallFailed = false;
-
- const FirmwareInfo& firmwareInfo = workingPackageData.GetFirmwareInfo();
- const QList<FileInfo>& fileInfos = firmwareInfo.GetFileInfos();
-
- QStringList arguments;
- arguments.append("flash");
-
- if (firmwareInfo.GetRepartition())
- arguments.append("--repartition");
-
- arguments.append("--pit");
- arguments.append(firmwareInfo.GetPitFilename());
-
- for (int i = 0; i < fileInfos.length(); i++)
- {
- QString flag;
- flag.sprintf("--%u", fileInfos[i].GetPartitionId());
-
- arguments.append(flag);
- arguments.append(fileInfos[i].GetFilename());
- }
-
- if (firmwareInfo.GetNoReboot())
- arguments.append("--no-reboot");
-
- if (resume)
- arguments.append("--resume");
-
- if (verboseOutput)
- arguments.append("--verbose");
-
- arguments.append("--stdout-errors");
-
- StartHeimdall(arguments);
-}
-
-void MainWindow::FirmwareNameChanged(const QString& text)
-{
- workingPackageData.GetFirmwareInfo().SetName(text);
- UpdateInterfaceAvailability();
-}
-
-void MainWindow::FirmwareVersionChanged(const QString& text)
-{
- workingPackageData.GetFirmwareInfo().SetVersion(text);
- UpdateInterfaceAvailability();
-}
-
-void MainWindow::PlatformNameChanged(const QString& text)
-{
- workingPackageData.GetFirmwareInfo().GetPlatformInfo().SetName(text);
- UpdateInterfaceAvailability();
-}
-
-void MainWindow::PlatformVersionChanged(const QString& text)
-{
- workingPackageData.GetFirmwareInfo().GetPlatformInfo().SetVersion(text);
- UpdateInterfaceAvailability();
-}
-
-void MainWindow::HomepageUrlChanged(const QString& text)
-{
- workingPackageData.GetFirmwareInfo().SetUrl(text);
-}
-
-void MainWindow::DonateUrlChanged(const QString& text)
-{
- workingPackageData.GetFirmwareInfo().SetDonateUrl(text);
-}
-
-void MainWindow::DeveloperNameChanged(const QString& text)
-{
- UNUSED(text);
-
- UpdateCreatePackageInterfaceAvailability();
-}
-
-void MainWindow::SelectDeveloper(int row)
-{
- UNUSED(row);
-
- UpdateCreatePackageInterfaceAvailability();
-}
-
-void MainWindow::AddDeveloper(void)
-{
- workingPackageData.GetFirmwareInfo().GetDevelopers().append(createDeveloperNameLineEdit->text());
-
- createDevelopersListWidget->addItem(createDeveloperNameLineEdit->text());
- createDeveloperNameLineEdit->clear();
-
- UpdateCreatePackageInterfaceAvailability();
-}
-
-void MainWindow::RemoveDeveloper(void)
-{
- workingPackageData.GetFirmwareInfo().GetDevelopers().removeAt(createDevelopersListWidget->currentRow());
-
- QListWidgetItem *item = createDevelopersListWidget->currentItem();
- createDevelopersListWidget->setCurrentRow(-1);
- delete item;
-
- removeDeveloperButton->setEnabled(false);
-
- UpdateInterfaceAvailability();
-}
-
-void MainWindow::DeviceInfoChanged(const QString& text)
-{
- UNUSED(text);
-
- if (deviceManufacturerLineEdit->text().isEmpty() || deviceNameLineEdit->text().isEmpty() || deviceProductCodeLineEdit->text().isEmpty())
- addDeviceButton->setEnabled(false);
- else
- addDeviceButton->setEnabled(true);
-}
-
-void MainWindow::SelectDevice(int row)
-{
- if (row >= 0)
- removeDeviceButton->setEnabled(true);
- else
- removeDeviceButton->setEnabled(false);
-}
-
-void MainWindow::AddDevice(void)
-{
- workingPackageData.GetFirmwareInfo().GetDeviceInfos().append(DeviceInfo(deviceManufacturerLineEdit->text(), deviceProductCodeLineEdit->text(),
- deviceNameLineEdit->text()));
-
- createDevicesListWidget->addItem(deviceManufacturerLineEdit->text() + " " + deviceNameLineEdit->text() + ": " + deviceProductCodeLineEdit->text());
- deviceManufacturerLineEdit->clear();
- deviceNameLineEdit->clear();
- deviceProductCodeLineEdit->clear();
-
- UpdateInterfaceAvailability();
-}
-
-void MainWindow::RemoveDevice(void)
-{
- workingPackageData.GetFirmwareInfo().GetDeviceInfos().removeAt(createDevicesListWidget->currentRow());
-
- QListWidgetItem *item = createDevicesListWidget->currentItem();
- createDevicesListWidget->setCurrentRow(-1);
- delete item;
-
- removeDeviceButton->setEnabled(false);
-
- UpdateInterfaceAvailability();
-}
-
-void MainWindow::BuildPackage(void)
-{
- QString packagePath = PromptFileCreation("Save Package", "*.tar.gz");
-
- if (!packagePath.isEmpty())
- {
- if (!packagePath.endsWith(".tar.gz", Qt::CaseInsensitive))
- {
- if (packagePath.endsWith(".tar", Qt::CaseInsensitive))
- packagePath.append(".gz");
- else if (packagePath.endsWith(".gz", Qt::CaseInsensitive))
- packagePath.replace(packagePath.length() - 3, ".tar.gz");
- else if (packagePath.endsWith(".tgz", Qt::CaseInsensitive))
- packagePath.replace(packagePath.length() - 4, ".tar.gz");
- else
- packagePath.append(".tar.gz");
- }
-
- Packaging::BuildPackage(packagePath, workingPackageData.GetFirmwareInfo());
- }
-}
-
-void MainWindow::DetectDevice(void)
-{
- deviceDetectedRadioButton->setChecked(false);
- utilityOutputPlainTextEdit->clear();
-
- heimdallState = HeimdallState::DetectingDevice;
- heimdallFailed = false;
-
- QStringList arguments;
- arguments.append("detect");
-
- if (verboseOutput)
- arguments.append("--verbose");
-
- arguments.append("--stdout-errors");
-
- StartHeimdall(arguments);
-}
-
-void MainWindow::ClosePcScreen(void)
-{
- utilityOutputPlainTextEdit->clear();
-
- heimdallState = HeimdallState::ClosingPcScreen;
- heimdallFailed = false;
-
- QStringList arguments;
- arguments.append("close-pc-screen");
-
- if (resume)
- arguments.append("--resume");
-
- if (verboseOutput)
- arguments.append("--verbose");
-
- arguments.append("--stdout-errors");
-
- StartHeimdall(arguments);
-}
-
-void MainWindow::SelectPitDestination(void)
-{
- QString path = PromptFileCreation("Save PIT", "*.pit");
-
- if (path != "")
- {
- if (!path.endsWith(".pit"))
- path.append(".pit");
-
- pitDestinationLineEdit->setText(path);
-
- UpdateInterfaceAvailability();
- }
-}
-
-void MainWindow::DownloadPit(void)
-{
- deviceDetectedRadioButton->setChecked(false);
- utilityOutputPlainTextEdit->clear();
-
- heimdallState = HeimdallState::DownloadingPit;
- heimdallFailed = false;
-
- QStringList arguments;
- arguments.append("download-pit");
-
- arguments.append("--output");
- arguments.append(pitDestinationLineEdit->text());
-
- arguments.append("--no-reboot");
-
- if (resume)
- arguments.append("--resume");
-
- if (verboseOutput)
- arguments.append("--verbose");
-
- arguments.append("--stdout-errors");
-
- StartHeimdall(arguments);
-}
-
-void MainWindow::DevicePrintPitToggled(bool checked)
-{
- if (checked)
- {
- if (printPitLocalFileRadioBox->isChecked())
- printPitLocalFileRadioBox->setChecked(false);
- }
-
- UpdateUtilitiesInterfaceAvailability();
-}
-
-void MainWindow::LocalFilePrintPitToggled(bool checked)
-{
- if (checked)
- {
- if (printPitDeviceRadioBox->isChecked())
- printPitDeviceRadioBox->setChecked(false);
- }
-
- UpdateUtilitiesInterfaceAvailability();
-}
-
-void MainWindow::SelectPrintPitFile(void)
-{
- QString path = PromptFileSelection("Select PIT", "*.pit");
-
- if (path != "")
- printLocalPitLineEdit->setText(path);
-
- if (printLocalPitLineEdit->text() != "")
- printPitButton->setEnabled(true);
- else
- printPitButton->setEnabled(false);
-}
-
-void MainWindow::PrintPit(void)
-{
- utilityOutputPlainTextEdit->clear();
-
- heimdallState = HeimdallState::PrintingPit;
- heimdallFailed = false;
-
- QStringList arguments;
- arguments.append("print-pit");
-
- if (printPitLocalFileRadioBox->isChecked())
- {
- arguments.append("--file");
- arguments.append(printLocalPitLineEdit->text());
- }
-
- arguments.append("--stdout-errors");
- arguments.append("--no-reboot");
-
- if (resume)
- arguments.append("--resume");
-
- if (verboseOutput)
- arguments.append("--verbose");
-
- StartHeimdall(arguments);
-}
-
-void MainWindow::HandleHeimdallStdout(void)
-{
- QString output = heimdallProcess.readAll();
-
- // We often receive multiple lots of output from Heimdall at one time. So we use regular expressions
- // to ensure we don't miss out on any important information.
- QRegExp uploadingExp("Uploading [^\n]+\n");
- if (output.lastIndexOf(uploadingExp) > -1)
- flashLabel->setText(uploadingExp.cap().left(uploadingExp.cap().length() - 1));
-
- QRegExp percentExp("[\b\n][0-9]+%");
- if (output.lastIndexOf(percentExp) > -1)
- {
- QString percentString = percentExp.cap();
- flashProgressBar->setValue(percentString.mid(1, percentString.length() - 2).toInt());
- }
-
- output.remove(QChar('\b'));
- output.replace(QChar('%'), QString("%\n"));
-
- if (heimdallState == HeimdallState::Flashing)
- {
- outputPlainTextEdit->insertPlainText(output);
- outputPlainTextEdit->ensureCursorVisible();
- }
- else
- {
- utilityOutputPlainTextEdit->insertPlainText(output);
- utilityOutputPlainTextEdit->ensureCursorVisible();
- }
-}
-
-void MainWindow::HandleHeimdallReturned(int exitCode, QProcess::ExitStatus exitStatus)
-{
- HandleHeimdallStdout();
-
- if (exitStatus == QProcess::NormalExit && exitCode == 0)
- {
- bool executedNoReboot = (heimdallState == HeimdallState::Flashing && loadedPackageData.GetFirmwareInfo().GetNoReboot())
- || (heimdallState == HeimdallState::PrintingPit && printPitDeviceRadioBox->isChecked()) || heimdallState == HeimdallState::DownloadingPit;
-
- SetResume(executedNoReboot);
-
- if (heimdallState == HeimdallState::Flashing)
- {
- flashLabel->setText("Flash completed successfully!");
- }
- else if (heimdallState == HeimdallState::DetectingDevice)
- {
- deviceDetectedRadioButton->setChecked(true);
- }
- }
- else
- {
- if (heimdallState == HeimdallState::Flashing)
- {
- QString error = heimdallProcess.readAllStandardError();
-
- int lastNewLineChar = error.lastIndexOf('\n');
-
- if (lastNewLineChar == 0)
- error = error.mid(1).remove("ERROR: ");
- else
- error = error.left(lastNewLineChar).remove("ERROR: ");
-
- flashLabel->setText(error);
- }
- else if (heimdallState == HeimdallState::DetectingDevice)
- {
- deviceDetectedRadioButton->setChecked(false);
- }
- }
-
- heimdallState = HeimdallState::Stopped;
- flashProgressBar->setEnabled(false);
- UpdateInterfaceAvailability();
-}
-
-void MainWindow::HandleHeimdallError(QProcess::ProcessError error)
-{
- if (error == QProcess::FailedToStart || error == QProcess::Timedout)
- {
- if (heimdallState == HeimdallState::Flashing)
- {
- flashLabel->setText("Failed to start Heimdall!");
- flashProgressBar->setEnabled(false);
- }
- else
- {
- utilityOutputPlainTextEdit->setPlainText("\nFRONTEND ERROR: Failed to start Heimdall!");
- }
-
- heimdallFailed = true;
- heimdallState = HeimdallState::Stopped;
- UpdateInterfaceAvailability();
- }
- else if (error == QProcess::Crashed)
- {
- if (heimdallState == HeimdallState::Flashing)
- {
- flashLabel->setText("Heimdall crashed!");
- flashProgressBar->setEnabled(false);
- }
- else
- {
- utilityOutputPlainTextEdit->appendPlainText("\nFRONTEND ERROR: Heimdall crashed!");
- }
-
- heimdallState = HeimdallState::Stopped;
- UpdateInterfaceAvailability();
- }
- else
- {
- if (heimdallState == HeimdallState::Flashing)
- {
- flashLabel->setText("Heimdall reported an unknown error!");
- flashProgressBar->setEnabled(false);
- }
- else
- {
- utilityOutputPlainTextEdit->appendPlainText("\nFRONTEND ERROR: Heimdall reported an unknown error!");
- }
-
- heimdallState = HeimdallState::Stopped;
- UpdateInterfaceAvailability();
- }
-}
+/* Copyright (c) 2010-2014 Benjamin Dobell, Glass Echidna
+
+ Permission is hereby granted, free of charge, to any person obtaining a copy
+ of this software and associated documentation files (the "Software"), to deal
+ in the Software without restriction, including without limitation the rights
+ to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ copies of the Software, and to permit persons to whom the Software is
+ furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be included in
+ all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ THE SOFTWARE.*/
+
+// Qt
+#include <QCoreApplication>
+#include <QDesktopServices>
+#include <QDir>
+#include <QFileDialog>
+#include <QProcess>
+#include <QRegExp>
+#include <QUrl>
+
+// Heimdall Frontend
+#include "Alerts.h"
+#include "mainwindow.h"
+#include "Packaging.h"
+
+#define UNUSED(x) (void)(x)
+
+using namespace HeimdallFrontend;
+
+void MainWindow::StartHeimdall(const QStringList& arguments)
+{
+ UpdateInterfaceAvailability();
+
+ heimdallProcess.setReadChannel(QProcess::StandardOutput);
+
+ heimdallProcess.start("heimdall", arguments);
+ heimdallProcess.waitForStarted(3000);
+
+ // OS X was playing up and not finding heimdall, so we're manually checking the PATH.
+ if (heimdallFailed)
+ {
+ QStringList environment = QProcess::systemEnvironment();
+
+ QStringList paths;
+
+ // Ensure /usr/local/bin and /usr/bin are in PATH.
+ for (int i = 0; i < environment.length(); i++)
+ {
+ if (environment[i].left(5) == "PATH=")
+ {
+ paths = environment[i].mid(5).split(':');
+
+ if (!paths.contains("/usr/local/bin"))
+ paths.prepend("/usr/local/bin");
+
+ if (!paths.contains("/usr/bin"))
+ paths.prepend("/usr/bin");
+
+ break;
+ }
+ }
+
+ int pathIndex = -1;
+
+ while (heimdallFailed && ++pathIndex < paths.length())
+ {
+ QString heimdallPath = paths[pathIndex];
+
+ if (heimdallPath.length() > 0)
+ {
+ utilityOutputPlainTextEdit->clear();
+ heimdallFailed = false;
+
+ if (heimdallPath[heimdallPath.length() - 1] != QDir::separator())
+ heimdallPath += QDir::separator();
+
+ heimdallPath += "heimdall";
+
+ heimdallProcess.start(heimdallPath, arguments);
+ heimdallProcess.waitForStarted(3000);
+ }
+ }
+
+ if (heimdallFailed)
+ {
+ flashLabel->setText("Failed to start Heimdall!");
+
+ heimdallState = HeimdallState::Stopped;
+ UpdateInterfaceAvailability();
+ }
+ }
+}
+
+void MainWindow::UpdateUnusedPartitionIds(void)
+{
+ unusedPartitionIds.clear();
+
+ // Initially populate unusedPartitionIds with all possible partition IDs.
+ for (unsigned int i = 0; i < currentPitData.GetEntryCount(); i++)
+ {
+ const PitEntry *pitEntry = currentPitData.GetEntry(i);
+
+ if (pitEntry->IsFlashable() && strcmp(pitEntry->GetPartitionName(), "PIT") != 0 && strcmp(pitEntry->GetPartitionName(), "PT") != 0)
+ unusedPartitionIds.append(pitEntry->GetIdentifier());
+ }
+
+ // Remove any used partition IDs from unusedPartitionIds
+ QList<FileInfo>& fileList = workingPackageData.GetFirmwareInfo().GetFileInfos();
+
+ for (int i = 0; i < fileList.length(); i++)
+ unusedPartitionIds.removeOne(fileList[i].GetPartitionId());
+}
+
+bool MainWindow::ReadPit(QFile *file)
+{
+ if(!file->open(QIODevice::ReadOnly))
+ return (false);
+
+ unsigned char *buffer = new unsigned char[file->size()];
+
+ file->read(reinterpret_cast<char *>(buffer), file->size());
+ file->close();
+
+ bool success = currentPitData.Unpack(buffer);
+ delete buffer;
+
+ if (!success)
+ currentPitData.Clear();
+
+ return (success);
+}
+
+void MainWindow::UpdatePackageUserInterface(void)
+{
+ supportedDevicesListWidget->clear();
+ includedFilesListWidget->clear();
+
+ if (loadedPackageData.IsCleared())
+ {
+ // Package Interface
+ firmwareNameLineEdit->clear();
+ versionLineEdit->clear();
+
+ developerNamesLineEdit->clear();
+
+ platformLineEdit->clear();
+
+ repartitionRadioButton->setChecked(false);
+ noRebootRadioButton->setChecked(false);
+ }
+ else
+ {
+ firmwareNameLineEdit->setText(loadedPackageData.GetFirmwareInfo().GetName());
+ versionLineEdit->setText(loadedPackageData.GetFirmwareInfo().GetVersion());
+
+ QString developerNames;
+
+ if (!loadedPackageData.GetFirmwareInfo().GetDevelopers().isEmpty())
+ {
+ developerNames = loadedPackageData.GetFirmwareInfo().GetDevelopers()[0];
+ for (int i = 1; i < loadedPackageData.GetFirmwareInfo().GetDevelopers().length(); i++)
+ developerNames += ", " + loadedPackageData.GetFirmwareInfo().GetDevelopers()[i];
+ }
+
+ developerNamesLineEdit->setText(developerNames);
+
+ platformLineEdit->setText(loadedPackageData.GetFirmwareInfo().GetPlatformInfo().GetName() + " ("
+ + loadedPackageData.GetFirmwareInfo().GetPlatformInfo().GetVersion() + ")");
+
+ for (int i = 0; i < loadedPackageData.GetFirmwareInfo().GetDeviceInfos().length(); i++)
+ {
+ const DeviceInfo& deviceInfo = loadedPackageData.GetFirmwareInfo().GetDeviceInfos()[i];
+ supportedDevicesListWidget->addItem(deviceInfo.GetManufacturer() + " " + deviceInfo.GetName() + ": " + deviceInfo.GetProduct());
+ }
+
+ for (int i = 0; i < loadedPackageData.GetFirmwareInfo().GetFileInfos().length(); i++)
+ {
+ const FileInfo& fileInfo = loadedPackageData.GetFirmwareInfo().GetFileInfos()[i];
+ includedFilesListWidget->addItem(fileInfo.GetFilename());
+ }
+
+ repartitionRadioButton->setChecked(loadedPackageData.GetFirmwareInfo().GetRepartition());
+ noRebootRadioButton->setChecked(loadedPackageData.GetFirmwareInfo().GetNoReboot());
+ }
+
+ UpdateLoadPackageInterfaceAvailability();
+}
+
+bool MainWindow::IsArchive(QString path)
+{
+ // Not a real check but hopefully it gets the message across, don't directly flash archives!
+ return (path.endsWith(".tar", Qt::CaseInsensitive) || path.endsWith(".gz", Qt::CaseInsensitive) || path.endsWith(".zip", Qt::CaseInsensitive)
+ || path.endsWith(".bz2", Qt::CaseInsensitive) || path.endsWith(".7z", Qt::CaseInsensitive) || path.endsWith(".rar", Qt::CaseInsensitive));
+}
+
+QString MainWindow::PromptFileSelection(const QString& caption, const QString& filter)
+{
+ QString path = QFileDialog::getOpenFileName(this, caption, lastDirectory, filter);
+
+ if (path != "")
+ lastDirectory = path.left(path.lastIndexOf('/') + 1);
+
+ return (path);
+}
+
+QString MainWindow::PromptFileCreation(const QString& caption, const QString& filter)
+{
+ QString path = QFileDialog::getSaveFileName(this, caption, lastDirectory, filter);
+
+ if (path != "")
+ lastDirectory = path.left(path.lastIndexOf('/') + 1);
+
+ return (path);
+}
+
+void MainWindow::UpdateLoadPackageInterfaceAvailability(void)
+{
+ if (loadedPackageData.IsCleared())
+ {
+ developerHomepageButton->setEnabled(false);
+ developerDonateButton->setEnabled(false);
+
+ loadFirmwareButton->setEnabled(false);
+ }
+ else
+ {
+ if (!loadedPackageData.GetFirmwareInfo().GetUrl().isEmpty())
+ developerHomepageButton->setEnabled(true);
+ else
+ developerHomepageButton->setEnabled(false);
+
+ if (!loadedPackageData.GetFirmwareInfo().GetDonateUrl().isEmpty())
+ developerDonateButton->setEnabled(true);
+ else
+ developerDonateButton->setEnabled(false);
+
+ loadFirmwareButton->setEnabled(heimdallState == HeimdallState::Stopped);
+ }
+}
+
+void MainWindow::UpdateFlashInterfaceAvailability(void)
+{
+ if (heimdallState == HeimdallState::Stopped)
+ {
+ partitionNameComboBox->setEnabled(partitionsListWidget->currentRow() >= 0);
+
+ bool allPartitionsValid = true;
+ QList<FileInfo>& fileList = workingPackageData.GetFirmwareInfo().GetFileInfos();
+
+ for (int i = 0; i < fileList.length(); i++)
+ {
+ if (fileList[i].GetFilename().isEmpty())
+ {
+ allPartitionsValid = false;
+ break;
+ }
+ }
+
+ bool validFlashSettings = allPartitionsValid && fileList.length() > 0;
+
+ flashProgressBar->setEnabled(false);
+ optionsGroup->setEnabled(true);
+ sessionGroup->setEnabled(true);
+ startFlashButton->setEnabled(validFlashSettings);
+ noRebootCheckBox->setEnabled(validFlashSettings);
+ resumeCheckbox->setEnabled(validFlashSettings);
+ }
+ else
+ {
+ partitionNameComboBox->setEnabled(false);
+
+ flashProgressBar->setEnabled(true);
+ optionsGroup->setEnabled(false);
+ sessionGroup->setEnabled(false);
+ }
+}
+
+void MainWindow::UpdateCreatePackageInterfaceAvailability(void)
+{
+ if (heimdallState == HeimdallState::Stopped)
+ {
+ const FirmwareInfo& firmwareInfo = workingPackageData.GetFirmwareInfo();
+
+ if (firmwareInfo.GetName().isEmpty() || firmwareInfo.GetVersion().isEmpty() || firmwareInfo.GetPlatformInfo().GetName().isEmpty()
+ || firmwareInfo.GetPlatformInfo().GetVersion().isEmpty() || firmwareInfo.GetDevelopers().isEmpty() || firmwareInfo.GetDeviceInfos().isEmpty())
+ {
+ buildPackageButton->setEnabled(false);
+ }
+ else
+ {
+ buildPackageButton->setEnabled(true);
+ }
+
+ if (addDeveloperButton->text().isEmpty())
+ addDeveloperButton->setEnabled(false);
+ else
+ addDeveloperButton->setEnabled(true);
+
+ if (createDevelopersListWidget->currentRow() >= 0)
+ removeDeveloperButton->setEnabled(true);
+ else
+ removeDeveloperButton->setEnabled(false);
+ }
+ else
+ {
+ buildPackageButton->setEnabled(false);
+ }
+}
+
+void MainWindow::UpdateUtilitiesInterfaceAvailability(void)
+{
+ if (heimdallState == HeimdallState::Stopped)
+ {
+ detectDeviceButton->setEnabled(true);
+ closePcScreenButton->setEnabled(true);
+ pitSaveAsButton->setEnabled(true);
+
+ downloadPitButton->setEnabled(!pitDestinationLineEdit->text().isEmpty());
+
+ if (printPitDeviceRadioBox->isChecked())
+ {
+ // Device
+ printLocalPitGroup->setEnabled(false);
+ printPitButton->setEnabled(true);
+ }
+ else
+ {
+ // Local File
+ printLocalPitGroup->setEnabled(true);
+ printLocalPitLineEdit->setEnabled(true);
+ printLocalPitBrowseButton->setEnabled(true);
+
+ printPitButton->setEnabled(!printLocalPitLineEdit->text().isEmpty());
+ }
+ }
+ else
+ {
+ detectDeviceButton->setEnabled(false);
+ closePcScreenButton->setEnabled(false);
+ pitSaveAsButton->setEnabled(false);
+ downloadPitButton->setEnabled(false);
+
+ printLocalPitGroup->setEnabled(false);
+ printPitButton->setEnabled(false);
+ }
+}
+
+void MainWindow::UpdateInterfaceAvailability(void)
+{
+ UpdateLoadPackageInterfaceAvailability();
+ UpdateFlashInterfaceAvailability();
+ UpdateCreatePackageInterfaceAvailability();
+ UpdateUtilitiesInterfaceAvailability();
+
+ if (heimdallState == HeimdallState::Stopped)
+ {
+ // Enable/disable tabs
+
+ for (int i = 0; i < functionTabWidget->count(); i++)
+ functionTabWidget->setTabEnabled(i, true);
+
+ functionTabWidget->setTabEnabled(functionTabWidget->indexOf(createPackageTab), startFlashButton->isEnabled());
+ }
+ else
+ {
+ // Disable non-current tabs
+
+ for (int i = 0; i < functionTabWidget->count(); i++)
+ {
+ if (i == functionTabWidget->currentIndex())
+ functionTabWidget->setTabEnabled(i, true);
+ else
+ functionTabWidget->setTabEnabled(i, false);
+ }
+ }
+}
+
+void MainWindow::UpdatePartitionNamesInterface(void)
+{
+ populatingPartitionNames = true;
+
+ partitionNameComboBox->clear();
+
+ int partitionsListWidgetRow = partitionsListWidget->currentRow();
+
+ if (partitionsListWidgetRow >= 0)
+ {
+ const FileInfo& partitionInfo = workingPackageData.GetFirmwareInfo().GetFileInfos()[partitionsListWidget->currentRow()];
+
+ for (int i = 0; i < unusedPartitionIds.length(); i++)
+ partitionNameComboBox->addItem(currentPitData.FindEntry(unusedPartitionIds[i])->GetPartitionName());
+
+ partitionNameComboBox->addItem(currentPitData.FindEntry(partitionInfo.GetPartitionId())->GetPartitionName());
+ partitionNameComboBox->setCurrentIndex(unusedPartitionIds.length());
+ }
+
+ populatingPartitionNames = false;
+
+ UpdateFlashInterfaceAvailability();
+}
+
+MainWindow::MainWindow(QWidget *parent) : QMainWindow(parent)
+{
+ setupUi(this);
+
+ heimdallState = HeimdallState::Stopped;
+
+ lastDirectory = QDir::toNativeSeparators(QApplication::applicationDirPath());
+
+ populatingPartitionNames = false;
+
+ verboseOutput = false;
+ resume = false;
+
+ tabIndex = functionTabWidget->currentIndex();
+ functionTabWidget->setTabEnabled(functionTabWidget->indexOf(createPackageTab), false);
+
+ QObject::connect(functionTabWidget, SIGNAL(currentChanged(int)), this, SLOT(FunctionTabChanged(int)));
+
+ // Menu
+ QObject::connect(actionDonate, SIGNAL(triggered()), this, SLOT(OpenDonationWebpage()));
+ QObject::connect(actionVerboseOutput, SIGNAL(toggled(bool)), this, SLOT(SetVerboseOutput(bool)));
+ QObject::connect(actionResumeConnection, SIGNAL(toggled(bool)), this, SLOT(SetResume(bool)));
+ QObject::connect(actionAboutHeimdall, SIGNAL(triggered()), this, SLOT(ShowAbout()));
+
+ // Load Package Tab
+ QObject::connect(browseFirmwarePackageButton, SIGNAL(clicked()), this, SLOT(SelectFirmwarePackage()));
+ QObject::connect(developerHomepageButton, SIGNAL(clicked()), this, SLOT(OpenDeveloperHomepage()));
+ QObject::connect(developerDonateButton, SIGNAL(clicked()), this, SLOT(OpenDeveloperDonationWebpage()));
+ QObject::connect(loadFirmwareButton, SIGNAL(clicked()), this, SLOT(LoadFirmwarePackage()));
+
+ QObject::connect(partitionsListWidget, SIGNAL(currentRowChanged(int)), this, SLOT(SelectPartition(int)));
+ QObject::connect(addPartitionButton, SIGNAL(clicked()), this, SLOT(AddPartition()));
+ QObject::connect(removePartitionButton, SIGNAL(clicked()), this, SLOT(RemovePartition()));
+
+ // Flash Tab
+ QObject::connect(partitionNameComboBox, SIGNAL(currentIndexChanged(int)), this, SLOT(SelectPartitionName(int)));
+ QObject::connect(partitionFileBrowseButton, SIGNAL(clicked()), this, SLOT(SelectPartitionFile()));
+
+ QObject::connect(pitBrowseButton, SIGNAL(clicked()), this, SLOT(SelectPit()));
+
+ QObject::connect(repartitionCheckBox, SIGNAL(stateChanged(int)), this, SLOT(SetRepartition(int)));
+
+ QObject::connect(noRebootCheckBox, SIGNAL(stateChanged(int)), this, SLOT(SetNoReboot(int)));
+ QObject::connect(resumeCheckbox, SIGNAL(stateChanged(int)), this, SLOT(SetResume(int)));
+
+ QObject::connect(startFlashButton, SIGNAL(clicked()), this, SLOT(StartFlash()));
+
+ // Create Package Tab
+ QObject::connect(createFirmwareNameLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(FirmwareNameChanged(const QString&)));
+ QObject::connect(createFirmwareVersionLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(FirmwareVersionChanged(const QString&)));
+ QObject::connect(createPlatformNameLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(PlatformNameChanged(const QString&)));
+ QObject::connect(createPlatformVersionLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(PlatformVersionChanged(const QString&)));
+
+ QObject::connect(createHomepageLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(HomepageUrlChanged(const QString&)));
+ QObject::connect(createDonateLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(DonateUrlChanged(const QString&)));
+
+ QObject::connect(createDevelopersListWidget, SIGNAL(currentRowChanged(int)), this, SLOT(SelectDeveloper(int)));
+ QObject::connect(createDeveloperNameLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(DeveloperNameChanged(const QString&)));
+ QObject::connect(addDeveloperButton, SIGNAL(clicked()), this, SLOT(AddDeveloper()));
+ QObject::connect(removeDeveloperButton, SIGNAL(clicked()), this, SLOT(RemoveDeveloper()));
+
+ QObject::connect(createDevicesListWidget, SIGNAL(currentRowChanged(int)), this, SLOT(SelectDevice(int)));
+ QObject::connect(deviceManufacturerLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(DeviceInfoChanged(const QString&)));
+ QObject::connect(deviceNameLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(DeviceInfoChanged(const QString&)));
+ QObject::connect(deviceProductCodeLineEdit, SIGNAL(textChanged(const QString&)), this, SLOT(DeviceInfoChanged(const QString&)));
+ QObject::connect(addDeviceButton, SIGNAL(clicked()), this, SLOT(AddDevice()));
+ QObject::connect(removeDeviceButton, SIGNAL(clicked()), this, SLOT(RemoveDevice()));
+
+ QObject::connect(buildPackageButton, SIGNAL(clicked()), this, SLOT(BuildPackage()));
+
+ // Utilities Tab
+ QObject::connect(detectDeviceButton, SIGNAL(clicked()), this, SLOT(DetectDevice()));
+
+ QObject::connect(closePcScreenButton, SIGNAL(clicked()), this, SLOT(ClosePcScreen()));
+
+ QObject::connect(printPitDeviceRadioBox, SIGNAL(toggled(bool)), this, SLOT(DevicePrintPitToggled(bool)));
+ QObject::connect(printPitLocalFileRadioBox, SIGNAL(toggled(bool)), this, SLOT(LocalFilePrintPitToggled(bool)));
+ QObject::connect(printLocalPitBrowseButton, SIGNAL(clicked()), this, SLOT(SelectPrintPitFile()));
+ QObject::connect(printPitButton, SIGNAL(clicked()), this, SLOT(PrintPit()));
+
+ QObject::connect(pitSaveAsButton, SIGNAL(clicked()), this, SLOT(SelectPitDestination()));
+ QObject::connect(downloadPitButton, SIGNAL(clicked()), this, SLOT(DownloadPit()));
+
+ // Heimdall Command Line
+ QObject::connect(&heimdallProcess, SIGNAL(readyRead()), this, SLOT(HandleHeimdallStdout()));
+ QObject::connect(&heimdallProcess, SIGNAL(finished(int, QProcess::ExitStatus)), this, SLOT(HandleHeimdallReturned(int, QProcess::ExitStatus)));
+ QObject::connect(&heimdallProcess, SIGNAL(error(QProcess::ProcessError)), this, SLOT(HandleHeimdallError(QProcess::ProcessError)));
+}
+
+MainWindow::~MainWindow()
+{
+}
+
+void MainWindow::OpenDonationWebpage(void)
+{
+ QDesktopServices::openUrl(QUrl("http://www.glassechidna.com.au/donate/", QUrl::StrictMode));
+}
+
+void MainWindow::SetVerboseOutput(bool enabled)
+{
+ verboseOutput = enabled;
+}
+
+void MainWindow::ShowAbout(void)
+{
+ aboutForm.show();
+}
+
+void MainWindow::FunctionTabChanged(int index)
+{
+ tabIndex = index;
+ deviceDetectedRadioButton->setChecked(false);
+}
+
+void MainWindow::SelectFirmwarePackage(void)
+{
+ loadedPackageData.Clear();
+ UpdatePackageUserInterface();
+
+ QString path = PromptFileSelection("Select Package", "*.tar.gz");
+ firmwarePackageLineEdit->setText(path);
+
+ if (firmwarePackageLineEdit->text() != "")
+ {
+ if (Packaging::ExtractPackage(firmwarePackageLineEdit->text(), &loadedPackageData))
+ UpdatePackageUserInterface();
+ else
+ loadedPackageData.Clear();
+ }
+}
+
+void MainWindow::OpenDeveloperHomepage(void)
+{
+ if(!QDesktopServices::openUrl(QUrl(loadedPackageData.GetFirmwareInfo().GetUrl(), QUrl::TolerantMode)))
+ Alerts::DisplayWarning(QString("Cannot open invalid URL:\n%1").arg(loadedPackageData.GetFirmwareInfo().GetUrl()));
+}
+
+void MainWindow::OpenDeveloperDonationWebpage(void)
+{
+ if (!QDesktopServices::openUrl(QUrl(loadedPackageData.GetFirmwareInfo().GetDonateUrl(), QUrl::TolerantMode)))
+ Alerts::DisplayWarning(QString("Cannot open invalid URL:\n%1").arg(loadedPackageData.GetFirmwareInfo().GetDonateUrl()));
+}
+
+void MainWindow::LoadFirmwarePackage(void)
+{
+ workingPackageData.Clear();
+ currentPitData.Clear();
+
+ workingPackageData.GetFiles().append(loadedPackageData.GetFiles());
+ loadedPackageData.RemoveAllFiles();
+
+ const QList<FileInfo> packageFileInfos = loadedPackageData.GetFirmwareInfo().GetFileInfos();
+
+ for (int i = 0; i < packageFileInfos.length(); i++)
+ {
+ bool fileFound = false;
+
+ for (int j = 0; j < workingPackageData.GetFiles().length(); j++)
+ {
+ if (workingPackageData.GetFiles()[j]->fileTemplate() == ("XXXXXX-" + packageFileInfos[i].GetFilename()))
+ {
+ FileInfo partitionInfo(packageFileInfos[i].GetPartitionId(), QDir::current().absoluteFilePath(workingPackageData.GetFiles()[j]->fileName()));
+ workingPackageData.GetFirmwareInfo().GetFileInfos().append(partitionInfo);
+
+ fileFound = true;
+ break;
+ }
+ }
+
+ if (!fileFound)
+ Alerts::DisplayWarning(QString("%1 is missing from the package.").arg(packageFileInfos[i].GetFilename()));
+ }
+
+ // Find the PIT file and read it
+ for (int i = 0; i < workingPackageData.GetFiles().length(); i++)
+ {
+ QTemporaryFile *file = workingPackageData.GetFiles()[i];
+
+ if (file->fileTemplate() == ("XXXXXX-" + loadedPackageData.GetFirmwareInfo().GetPitFilename()))
+ {
+ workingPackageData.GetFirmwareInfo().SetPitFilename(QDir::current().absoluteFilePath(file->fileName()));
+
+ if (!ReadPit(file))
+ {
+ Alerts::DisplayError("Failed to read PIT file.");
+
+ loadedPackageData.Clear();
+ UpdatePackageUserInterface();
+
+ workingPackageData.Clear();
+ UpdateUnusedPartitionIds();
+ return;
+ }
+
+ break;
+ }
+ }
+
+ UpdateUnusedPartitionIds();
+ workingPackageData.GetFirmwareInfo().SetRepartition(loadedPackageData.GetFirmwareInfo().GetRepartition());
+ workingPackageData.GetFirmwareInfo().SetNoReboot(loadedPackageData.GetFirmwareInfo().GetNoReboot());
+
+ loadedPackageData.Clear();
+ UpdatePackageUserInterface();
+ firmwarePackageLineEdit->clear();
+
+ partitionsListWidget->clear();
+
+ // Populate partitionsListWidget with partition names (from the PIT file)
+ for (int i = 0; i < workingPackageData.GetFirmwareInfo().GetFileInfos().length(); i++)
+ {
+ const FileInfo& partitionInfo = workingPackageData.GetFirmwareInfo().GetFileInfos()[i];
+
+ const PitEntry *pitEntry = currentPitData.FindEntry(partitionInfo.GetPartitionId());
+
+ if (pitEntry)
+ {
+ partitionsListWidget->addItem(pitEntry->GetPartitionName());
+ }
+ else
+ {
+ Alerts::DisplayError("Firmware package includes invalid partition IDs.");
+
+ loadedPackageData.GetFirmwareInfo().Clear();
+ currentPitData.Clear();
+ UpdateUnusedPartitionIds();
+
+ partitionsListWidget->clear();
+ return;
+ }
+ }
+
+ partitionNameComboBox->clear();
+ partitionIdLineEdit->clear();
+ partitionFileLineEdit->clear();
+ partitionFileBrowseButton->setEnabled(false);
+
+ repartitionCheckBox->setEnabled(true);
+ repartitionCheckBox->setChecked(workingPackageData.GetFirmwareInfo().GetRepartition());
+ noRebootCheckBox->setEnabled(true);
+ noRebootCheckBox->setChecked(workingPackageData.GetFirmwareInfo().GetNoReboot());
+
+ partitionsListWidget->setEnabled(true);
+ addPartitionButton->setEnabled(true);
+ removePartitionButton->setEnabled(true && partitionsListWidget->currentRow() >= 0);
+
+ pitLineEdit->setText(workingPackageData.GetFirmwareInfo().GetPitFilename());
+
+ functionTabWidget->setCurrentWidget(flashTab);
+
+ UpdateInterfaceAvailability();
+}
+
+void MainWindow::SelectPartitionName(int index)
+{
+ if (!populatingPartitionNames && index != -1 && index != unusedPartitionIds.length())
+ {
+ unsigned int newPartitionIndex = unusedPartitionIds[index];
+ unusedPartitionIds.removeAt(index);
+
+ FileInfo& fileInfo = workingPackageData.GetFirmwareInfo().GetFileInfos()[partitionsListWidget->currentRow()];
+ unusedPartitionIds.append(fileInfo.GetPartitionId());
+ fileInfo.SetPartitionId(newPartitionIndex);
+
+ PitEntry *pitEntry = currentPitData.FindEntry(newPartitionIndex);
+
+ QString title("File");
+
+ if (pitEntry && strlen(pitEntry->GetFlashFilename()) > 0)
+ title += " (" + QString(pitEntry->GetFlashFilename()) + ")";
+
+ partitionFileGroup->setTitle(title);
+
+ if (!fileInfo.GetFilename().isEmpty())
+ {
+ QString partitionFilename = pitEntry->GetFlashFilename();
+ int lastPeriod = partitionFilename.lastIndexOf(QChar('.'));
+
+ if (lastPeriod >= 0)
+ {
+ QString partitionFileExtension = partitionFilename.mid(lastPeriod + 1);
+
+ lastPeriod = fileInfo.GetFilename().lastIndexOf(QChar('.'));
+
+ if (lastPeriod < 0 || fileInfo.GetFilename().mid(lastPeriod + 1) != partitionFileExtension)
+ Alerts::DisplayWarning(QString("%1 partition expects files with file extension \"%2\".").arg(pitEntry->GetPartitionName(), partitionFileExtension));
+ }
+ }
+
+ partitionNameComboBox->clear();
+
+ // Update interface
+ UpdatePartitionNamesInterface();
+ partitionIdLineEdit->setText(QString::number(newPartitionIndex));
+ partitionsListWidget->currentItem()->setText(currentPitData.FindEntry(newPartitionIndex)->GetPartitionName());
+ }
+}
+
+void MainWindow::SelectPartitionFile(void)
+{
+ QString path = PromptFileSelection();
+
+ if (path != "")
+ {
+ FileInfo& fileInfo = workingPackageData.GetFirmwareInfo().GetFileInfos()[partitionsListWidget->currentRow()];
+ PitEntry *pitEntry = currentPitData.FindEntry(fileInfo.GetPartitionId());
+
+ QString partitionFilename = pitEntry->GetFlashFilename();
+ int lastPeriod = partitionFilename.lastIndexOf(QChar('.'));
+
+ if (lastPeriod >= 0)
+ {
+ QString partitionFileExtension = partitionFilename.mid(lastPeriod + 1);
+
+ lastPeriod = path.lastIndexOf(QChar('.'));
+
+ if (lastPeriod < 0 || path.mid(lastPeriod + 1) != partitionFileExtension)
+ Alerts::DisplayWarning(QString("%1 partition expects files with file extension \"%2\".").arg(pitEntry->GetPartitionName(), partitionFileExtension));
+ }
+
+ fileInfo.SetFilename(path);
+ partitionFileLineEdit->setText(path);
+
+ pitBrowseButton->setEnabled(true);
+ partitionsListWidget->setEnabled(true);
+ UpdateInterfaceAvailability();
+
+ if (unusedPartitionIds.length() > 0)
+ addPartitionButton->setEnabled(true);
+ }
+}
+
+void MainWindow::SelectPartition(int row)
+{
+ if (row >= 0)
+ {
+ const FileInfo& partitionInfo = workingPackageData.GetFirmwareInfo().GetFileInfos()[row];
+
+ UpdatePartitionNamesInterface();
+
+ partitionIdLineEdit->setText(QString::number(partitionInfo.GetPartitionId()));
+ partitionFileLineEdit->setText(partitionInfo.GetFilename());
+ partitionFileBrowseButton->setEnabled(true);
+
+ removePartitionButton->setEnabled(true);
+
+ QString title("File");
+
+ PitEntry *pitEntry = currentPitData.FindEntry(partitionInfo.GetPartitionId());
+
+ if (pitEntry && strlen(pitEntry->GetFlashFilename()) > 0)
+ title += " (" + QString(pitEntry->GetFlashFilename()) + ")";
+
+ partitionFileGroup->setTitle(title);
+ }
+ else
+ {
+ UpdatePartitionNamesInterface();
+
+ partitionIdLineEdit->clear();
+ partitionFileLineEdit->clear();
+ partitionFileBrowseButton->setEnabled(false);
+
+ removePartitionButton->setEnabled(false);
+
+ partitionFileGroup->setTitle("File");
+ }
+}
+
+void MainWindow::AddPartition(void)
+{
+ FileInfo partitionInfo(unusedPartitionIds.first(), "");
+ workingPackageData.GetFirmwareInfo().GetFileInfos().append(partitionInfo);
+ UpdateUnusedPartitionIds();
+
+ pitBrowseButton->setEnabled(false);
+ addPartitionButton->setEnabled(false);
+
+ partitionsListWidget->addItem(currentPitData.FindEntry(partitionInfo.GetPartitionId())->GetPartitionName());
+ partitionsListWidget->setCurrentRow(partitionsListWidget->count() - 1);
+ partitionsListWidget->setEnabled(false);
+
+ UpdateInterfaceAvailability();
+}
+
+void MainWindow::RemovePartition(void)
+{
+ workingPackageData.GetFirmwareInfo().GetFileInfos().removeAt(partitionsListWidget->currentRow());
+ UpdateUnusedPartitionIds();
+
+ QListWidgetItem *item = partitionsListWidget->currentItem();
+ partitionsListWidget->setCurrentRow(-1);
+ delete item;
+
+ pitBrowseButton->setEnabled(true);
+ addPartitionButton->setEnabled(true);
+ partitionsListWidget->setEnabled(true);
+ UpdateInterfaceAvailability();
+}
+
+void MainWindow::SelectPit(void)
+{
+ QString path = PromptFileSelection("Select PIT", "*.pit");
+ bool validPit = path != "";
+
+ if (validPit)
+ {
+ // In order to map files in the old PIT to file in the new one, we first must use partition names instead of IDs.
+ QList<FileInfo> fileInfos = workingPackageData.GetFirmwareInfo().GetFileInfos();
+
+ int partitionNamesCount = fileInfos.length();
+ QString *partitionNames = new QString[fileInfos.length()];
+ for (int i = 0; i < fileInfos.length(); i++)
+ partitionNames[i] = currentPitData.FindEntry(fileInfos[i].GetPartitionId())->GetPartitionName();
+
+ currentPitData.Clear();
+
+ QFile pitFile(path);
+
+ if (ReadPit(&pitFile))
+ {
+ workingPackageData.GetFirmwareInfo().SetPitFilename(path);
+
+ partitionsListWidget->clear();
+ int partitionInfoIndex = 0;
+
+ for (int i = 0; i < partitionNamesCount; i++)
+ {
+ const PitEntry *pitEntry = currentPitData.FindEntry(partitionNames[i].toLatin1().constData());
+
+ if (pitEntry)
+ {
+ fileInfos[partitionInfoIndex++].SetPartitionId(pitEntry->GetIdentifier());
+ partitionsListWidget->addItem(pitEntry->GetPartitionName());
+ }
+ else
+ {
+ fileInfos.removeAt(partitionInfoIndex);
+ }
+ }
+ }
+ else
+ {
+ validPit = false;
+ }
+
+ // If the selected PIT was invalid, attempt to reload the old one.
+ if (!validPit)
+ {
+ Alerts::DisplayError("The file selected was not a valid PIT file.");
+
+ if (!workingPackageData.GetFirmwareInfo().GetPitFilename().isEmpty())
+ {
+ QFile originalPitFile(workingPackageData.GetFirmwareInfo().GetPitFilename());
+
+ if (ReadPit(&originalPitFile))
+ {
+ validPit = true;
+ }
+ else
+ {
+ Alerts::DisplayError("Failed to reload working PIT data.");
+
+ workingPackageData.Clear();
+ partitionsListWidget->clear();
+ }
+ }
+ }
+
+ UpdateUnusedPartitionIds();
+
+ delete [] partitionNames;
+
+ pitLineEdit->setText(workingPackageData.GetFirmwareInfo().GetPitFilename());
+
+ repartitionCheckBox->setEnabled(validPit);
+ noRebootCheckBox->setEnabled(validPit);
+ partitionsListWidget->setEnabled(validPit);
+
+ addPartitionButton->setEnabled(validPit);
+ removePartitionButton->setEnabled(validPit && partitionsListWidget->currentRow() >= 0);
+
+ UpdateInterfaceAvailability();
+ }
+}
+
+
+void MainWindow::SetRepartition(int enabled)
+{
+ workingPackageData.GetFirmwareInfo().SetRepartition(enabled);
+
+ repartitionCheckBox->setChecked(enabled);
+}
+
+void MainWindow::SetNoReboot(int enabled)
+{
+ workingPackageData.GetFirmwareInfo().SetNoReboot(enabled);
+
+ noRebootCheckBox->setChecked(enabled);
+}
+
+void MainWindow::SetResume(bool enabled)
+{
+ resume = enabled;
+
+ actionResumeConnection->setChecked(enabled);
+ resumeCheckbox->setChecked(enabled);
+}
+
+void MainWindow::SetResume(int enabled)
+{
+ SetResume(enabled != 0);
+}
+
+void MainWindow::StartFlash(void)
+{
+ outputPlainTextEdit->clear();
+
+ heimdallState = HeimdallState::Flashing;
+ heimdallFailed = false;
+
+ const FirmwareInfo& firmwareInfo = workingPackageData.GetFirmwareInfo();
+ const QList<FileInfo>& fileInfos = firmwareInfo.GetFileInfos();
+
+ QStringList arguments;
+ arguments.append("flash");
+
+ if (firmwareInfo.GetRepartition())
+ arguments.append("--repartition");
+
+ arguments.append("--pit");
+ arguments.append(firmwareInfo.GetPitFilename());
+
+ for (int i = 0; i < fileInfos.length(); i++)
+ {
+ QString flag;
+ flag.sprintf("--%u", fileInfos[i].GetPartitionId());
+
+ arguments.append(flag);
+ arguments.append(fileInfos[i].GetFilename());
+ }
+
+ if (firmwareInfo.GetNoReboot())
+ arguments.append("--no-reboot");
+
+ if (resume)
+ arguments.append("--resume");
+
+ if (verboseOutput)
+ arguments.append("--verbose");
+
+ arguments.append("--stdout-errors");
+
+ StartHeimdall(arguments);
+}
+
+void MainWindow::FirmwareNameChanged(const QString& text)
+{
+ workingPackageData.GetFirmwareInfo().SetName(text);
+ UpdateInterfaceAvailability();
+}
+
+void MainWindow::FirmwareVersionChanged(const QString& text)
+{
+ workingPackageData.GetFirmwareInfo().SetVersion(text);
+ UpdateInterfaceAvailability();
+}
+
+void MainWindow::PlatformNameChanged(const QString& text)
+{
+ workingPackageData.GetFirmwareInfo().GetPlatformInfo().SetName(text);
+ UpdateInterfaceAvailability();
+}
+
+void MainWindow::PlatformVersionChanged(const QString& text)
+{
+ workingPackageData.GetFirmwareInfo().GetPlatformInfo().SetVersion(text);
+ UpdateInterfaceAvailability();
+}
+
+void MainWindow::HomepageUrlChanged(const QString& text)
+{
+ workingPackageData.GetFirmwareInfo().SetUrl(text);
+}
+
+void MainWindow::DonateUrlChanged(const QString& text)
+{
+ workingPackageData.GetFirmwareInfo().SetDonateUrl(text);
+}
+
+void MainWindow::DeveloperNameChanged(const QString& text)
+{
+ UNUSED(text);
+
+ UpdateCreatePackageInterfaceAvailability();
+}
+
+void MainWindow::SelectDeveloper(int row)
+{
+ UNUSED(row);
+
+ UpdateCreatePackageInterfaceAvailability();
+}
+
+void MainWindow::AddDeveloper(void)
+{
+ workingPackageData.GetFirmwareInfo().GetDevelopers().append(createDeveloperNameLineEdit->text());
+
+ createDevelopersListWidget->addItem(createDeveloperNameLineEdit->text());
+ createDeveloperNameLineEdit->clear();
+
+ UpdateCreatePackageInterfaceAvailability();
+}
+
+void MainWindow::RemoveDeveloper(void)
+{
+ workingPackageData.GetFirmwareInfo().GetDevelopers().removeAt(createDevelopersListWidget->currentRow());
+
+ QListWidgetItem *item = createDevelopersListWidget->currentItem();
+ createDevelopersListWidget->setCurrentRow(-1);
+ delete item;
+
+ removeDeveloperButton->setEnabled(false);
+
+ UpdateInterfaceAvailability();
+}
+
+void MainWindow::DeviceInfoChanged(const QString& text)
+{
+ UNUSED(text);
+
+ if (deviceManufacturerLineEdit->text().isEmpty() || deviceNameLineEdit->text().isEmpty() || deviceProductCodeLineEdit->text().isEmpty())
+ addDeviceButton->setEnabled(false);
+ else
+ addDeviceButton->setEnabled(true);
+}
+
+void MainWindow::SelectDevice(int row)
+{
+ if (row >= 0)
+ removeDeviceButton->setEnabled(true);
+ else
+ removeDeviceButton->setEnabled(false);
+}
+
+void MainWindow::AddDevice(void)
+{
+ workingPackageData.GetFirmwareInfo().GetDeviceInfos().append(DeviceInfo(deviceManufacturerLineEdit->text(), deviceProductCodeLineEdit->text(),
+ deviceNameLineEdit->text()));
+
+ createDevicesListWidget->addItem(deviceManufacturerLineEdit->text() + " " + deviceNameLineEdit->text() + ": " + deviceProductCodeLineEdit->text());
+ deviceManufacturerLineEdit->clear();
+ deviceNameLineEdit->clear();
+ deviceProductCodeLineEdit->clear();
+
+ UpdateInterfaceAvailability();
+}
+
+void MainWindow::RemoveDevice(void)
+{
+ workingPackageData.GetFirmwareInfo().GetDeviceInfos().removeAt(createDevicesListWidget->currentRow());
+
+ QListWidgetItem *item = createDevicesListWidget->currentItem();
+ createDevicesListWidget->setCurrentRow(-1);
+ delete item;
+
+ removeDeviceButton->setEnabled(false);
+
+ UpdateInterfaceAvailability();
+}
+
+void MainWindow::BuildPackage(void)
+{
+ QString packagePath = PromptFileCreation("Save Package", "*.tar.gz");
+
+ if (!packagePath.isEmpty())
+ {
+ if (!packagePath.endsWith(".tar.gz", Qt::CaseInsensitive))
+ {
+ if (packagePath.endsWith(".tar", Qt::CaseInsensitive))
+ packagePath.append(".gz");
+ else if (packagePath.endsWith(".gz", Qt::CaseInsensitive))
+ packagePath.replace(packagePath.length() - 3, ".tar.gz");
+ else if (packagePath.endsWith(".tgz", Qt::CaseInsensitive))
+ packagePath.replace(packagePath.length() - 4, ".tar.gz");
+ else
+ packagePath.append(".tar.gz");
+ }
+
+ Packaging::BuildPackage(packagePath, workingPackageData.GetFirmwareInfo());
+ }
+}
+
+void MainWindow::DetectDevice(void)
+{
+ deviceDetectedRadioButton->setChecked(false);
+ utilityOutputPlainTextEdit->clear();
+
+ heimdallState = HeimdallState::DetectingDevice;
+ heimdallFailed = false;
+
+ QStringList arguments;
+ arguments.append("detect");
+
+ if (verboseOutput)
+ arguments.append("--verbose");
+
+ arguments.append("--stdout-errors");
+
+ StartHeimdall(arguments);
+}
+
+void MainWindow::ClosePcScreen(void)
+{
+ utilityOutputPlainTextEdit->clear();
+
+ heimdallState = HeimdallState::ClosingPcScreen;
+ heimdallFailed = false;
+
+ QStringList arguments;
+ arguments.append("close-pc-screen");
+
+ if (resume)
+ arguments.append("--resume");
+
+ if (verboseOutput)
+ arguments.append("--verbose");
+
+ arguments.append("--stdout-errors");
+
+ StartHeimdall(arguments);
+}
+
+void MainWindow::SelectPitDestination(void)
+{
+ QString path = PromptFileCreation("Save PIT", "*.pit");
+
+ if (path != "")
+ {
+ if (!path.endsWith(".pit"))
+ path.append(".pit");
+
+ pitDestinationLineEdit->setText(path);
+
+ UpdateInterfaceAvailability();
+ }
+}
+
+void MainWindow::DownloadPit(void)
+{
+ deviceDetectedRadioButton->setChecked(false);
+ utilityOutputPlainTextEdit->clear();
+
+ heimdallState = HeimdallState::DownloadingPit;
+ heimdallFailed = false;
+
+ QStringList arguments;
+ arguments.append("download-pit");
+
+ arguments.append("--output");
+ arguments.append(pitDestinationLineEdit->text());
+
+ arguments.append("--no-reboot");
+
+ if (resume)
+ arguments.append("--resume");
+
+ if (verboseOutput)
+ arguments.append("--verbose");
+
+ arguments.append("--stdout-errors");
+
+ StartHeimdall(arguments);
+}
+
+void MainWindow::DevicePrintPitToggled(bool checked)
+{
+ if (checked)
+ {
+ if (printPitLocalFileRadioBox->isChecked())
+ printPitLocalFileRadioBox->setChecked(false);
+ }
+
+ UpdateUtilitiesInterfaceAvailability();
+}
+
+void MainWindow::LocalFilePrintPitToggled(bool checked)
+{
+ if (checked)
+ {
+ if (printPitDeviceRadioBox->isChecked())
+ printPitDeviceRadioBox->setChecked(false);
+ }
+
+ UpdateUtilitiesInterfaceAvailability();
+}
+
+void MainWindow::SelectPrintPitFile(void)
+{
+ QString path = PromptFileSelection("Select PIT", "*.pit");
+
+ if (path != "")
+ printLocalPitLineEdit->setText(path);
+
+ if (printLocalPitLineEdit->text() != "")
+ printPitButton->setEnabled(true);
+ else
+ printPitButton->setEnabled(false);
+}
+
+void MainWindow::PrintPit(void)
+{
+ utilityOutputPlainTextEdit->clear();
+
+ heimdallState = HeimdallState::PrintingPit;
+ heimdallFailed = false;
+
+ QStringList arguments;
+ arguments.append("print-pit");
+
+ if (printPitLocalFileRadioBox->isChecked())
+ {
+ arguments.append("--file");
+ arguments.append(printLocalPitLineEdit->text());
+ }
+
+ arguments.append("--stdout-errors");
+ arguments.append("--no-reboot");
+
+ if (resume)
+ arguments.append("--resume");
+
+ if (verboseOutput)
+ arguments.append("--verbose");
+
+ StartHeimdall(arguments);
+}
+
+void MainWindow::HandleHeimdallStdout(void)
+{
+ QString output = heimdallProcess.readAll();
+
+ // We often receive multiple lots of output from Heimdall at one time. So we use regular expressions
+ // to ensure we don't miss out on any important information.
+ QRegExp uploadingExp("Uploading [^\n]+\n");
+ if (output.lastIndexOf(uploadingExp) > -1)
+ flashLabel->setText(uploadingExp.cap().left(uploadingExp.cap().length() - 1));
+
+ QRegExp percentExp("[\b\n][0-9]+%");
+ if (output.lastIndexOf(percentExp) > -1)
+ {
+ QString percentString = percentExp.cap();
+ flashProgressBar->setValue(percentString.mid(1, percentString.length() - 2).toInt());
+ }
+
+ output.remove(QChar('\b'));
+ output.replace(QChar('%'), QString("%\n"));
+
+ if (heimdallState == HeimdallState::Flashing)
+ {
+ outputPlainTextEdit->insertPlainText(output);
+ outputPlainTextEdit->ensureCursorVisible();
+ }
+ else
+ {
+ utilityOutputPlainTextEdit->insertPlainText(output);
+ utilityOutputPlainTextEdit->ensureCursorVisible();
+ }
+}
+
+void MainWindow::HandleHeimdallReturned(int exitCode, QProcess::ExitStatus exitStatus)
+{
+ HandleHeimdallStdout();
+
+ if (exitStatus == QProcess::NormalExit && exitCode == 0)
+ {
+ bool executedNoReboot = (heimdallState == HeimdallState::Flashing && loadedPackageData.GetFirmwareInfo().GetNoReboot())
+ || (heimdallState == HeimdallState::PrintingPit && printPitDeviceRadioBox->isChecked()) || heimdallState == HeimdallState::DownloadingPit;
+
+ SetResume(executedNoReboot);
+
+ if (heimdallState == HeimdallState::Flashing)
+ {
+ flashLabel->setText("Flash completed successfully!");
+ }
+ else if (heimdallState == HeimdallState::DetectingDevice)
+ {
+ deviceDetectedRadioButton->setChecked(true);
+ }
+ }
+ else
+ {
+ if (heimdallState == HeimdallState::Flashing)
+ {
+ QString error = heimdallProcess.readAllStandardError();
+
+ int lastNewLineChar = error.lastIndexOf('\n');
+
+ if (lastNewLineChar == 0)
+ error = error.mid(1).remove("ERROR: ");
+ else
+ error = error.left(lastNewLineChar).remove("ERROR: ");
+
+ flashLabel->setText(error);
+ }
+ else if (heimdallState == HeimdallState::DetectingDevice)
+ {
+ deviceDetectedRadioButton->setChecked(false);
+ }
+ }
+
+ heimdallState = HeimdallState::Stopped;
+ flashProgressBar->setEnabled(false);
+ UpdateInterfaceAvailability();
+}
+
+void MainWindow::HandleHeimdallError(QProcess::ProcessError error)
+{
+ if (error == QProcess::FailedToStart || error == QProcess::Timedout)
+ {
+ if (heimdallState == HeimdallState::Flashing)
+ {
+ flashLabel->setText("Failed to start Heimdall!");
+ flashProgressBar->setEnabled(false);
+ }
+ else
+ {
+ utilityOutputPlainTextEdit->setPlainText("\nFRONTEND ERROR: Failed to start Heimdall!");
+ }
+
+ heimdallFailed = true;
+ heimdallState = HeimdallState::Stopped;
+ UpdateInterfaceAvailability();
+ }
+ else if (error == QProcess::Crashed)
+ {
+ if (heimdallState == HeimdallState::Flashing)
+ {
+ flashLabel->setText("Heimdall crashed!");
+ flashProgressBar->setEnabled(false);
+ }
+ else
+ {
+ utilityOutputPlainTextEdit->appendPlainText("\nFRONTEND ERROR: Heimdall crashed!");
+ }
+
+ heimdallState = HeimdallState::Stopped;
+ UpdateInterfaceAvailability();
+ }
+ else
+ {
+ if (heimdallState == HeimdallState::Flashing)
+ {
+ flashLabel->setText("Heimdall reported an unknown error!");
+ flashProgressBar->setEnabled(false);
+ }
+ else
+ {
+ utilityOutputPlainTextEdit->appendPlainText("\nFRONTEND ERROR: Heimdall reported an unknown error!");
+ }
+
+ heimdallState = HeimdallState::Stopped;
+ UpdateInterfaceAvailability();
+ }
+}
diff --git a/heimdall-frontend/Source/mainwindow.h b/heimdall-frontend/source/mainwindow.h
index f14d919..8783792 100644
--- a/heimdall-frontend/Source/mainwindow.h
+++ b/heimdall-frontend/source/mainwindow.h
@@ -1,183 +1,183 @@
-/* Copyright (c) 2010-2014 Benjamin Dobell, Glass Echidna
-
- Permission is hereby granted, free of charge, to any person obtaining a copy
- of this software and associated documentation files (the "Software"), to deal
- in the Software without restriction, including without limitation the rights
- to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- copies of the Software, and to permit persons to whom the Software is
- furnished to do so, subject to the following conditions:
-
- The above copyright notice and this permission notice shall be included in
- all copies or substantial portions of the Software.
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- THE SOFTWARE.*/
-
-#ifndef MAINWINDOW_H
-#define MAINWINDOW_H
-
-// Qt
-#include <QList>
-#include <QMainWindow>
-#include <QProcess>
-#include <QTemporaryFile>
-
-// libpit
-#include "libpit.h"
-
-// Heimdall Frontend
-#include "aboutform.h"
-#include "ui_mainwindow.h"
-#include "PackageData.h"
-
-using namespace libpit;
-
-namespace HeimdallFrontend
-{
- class MainWindow : public QMainWindow, public Ui::MainWindow
- {
- Q_OBJECT
-
- private:
-
- enum class HeimdallState
- {
- Stopped = 0,
- Flashing,
- DetectingDevice,
- ClosingPcScreen,
- PrintingPit,
- DownloadingPit
- };
-
- enum
- {
- kPrintPitSourceDevice = 0,
- kPrintPitSourceLocalFile
- };
-
- AboutForm aboutForm;
-
- QString lastDirectory;
-
- int tabIndex;
-
- bool heimdallFailed;
- HeimdallState heimdallState;
- QProcess heimdallProcess;
-
- PackageData loadedPackageData;
-
- PitData currentPitData;
- PackageData workingPackageData;
-
- bool populatingPartitionNames;
- QList<unsigned int> unusedPartitionIds;
-
- bool verboseOutput;
- bool resume;
-
-
- void StartHeimdall(const QStringList& arguments);
-
- void UpdateUnusedPartitionIds(void);
- bool ReadPit(QFile *file);
-
- void UpdatePackageUserInterface(void);
-
- bool IsArchive(QString path);
-
- QString PromptFileSelection(const QString& caption = QString("Select File"), const QString& filter = QString());
- QString PromptFileCreation(const QString& caption = QString("Save File"), const QString& filter = QString());
-
- void UpdateLoadPackageInterfaceAvailability(void);
- void UpdateFlashInterfaceAvailability(void);
- void UpdateCreatePackageInterfaceAvailability(void);
- void UpdateUtilitiesInterfaceAvailability(void);
- void UpdateInterfaceAvailability(void);
-
- void UpdatePartitionNamesInterface(void);
-
- public:
-
- explicit MainWindow(QWidget *parent = 0);
- ~MainWindow();
-
- public slots:
-
- void OpenDonationWebpage(void);
- void SetVerboseOutput(bool enabled);
- void ShowAbout(void);
-
- void FunctionTabChanged(int index);
-
- // Load Package Tab
- void SelectFirmwarePackage(void);
- void OpenDeveloperHomepage(void);
- void OpenDeveloperDonationWebpage(void);
- void LoadFirmwarePackage(void);
-
- // Flash Tab
- void SelectPartitionName(int index);
- void SelectPartitionFile(void);
-
- void SelectPartition(int row);
- void AddPartition(void);
- void RemovePartition(void);
-
- void SelectPit(void);
-
- void SetRepartition(int enabled);
-
- void SetNoReboot(int enabled);
- void SetResume(bool enabled);
- void SetResume(int enabled);
-
- void StartFlash(void);
-
- // Create Package Tab
- void FirmwareNameChanged(const QString& text);
- void FirmwareVersionChanged(const QString& text);
- void PlatformNameChanged(const QString& text);
- void PlatformVersionChanged(const QString& text);
-
- void HomepageUrlChanged(const QString& text);
- void DonateUrlChanged(const QString& text);
-
- void DeveloperNameChanged(const QString& text);
- void SelectDeveloper(int row);
- void AddDeveloper(void);
- void RemoveDeveloper(void);
-
- void DeviceInfoChanged(const QString& text);
- void SelectDevice(int row);
- void AddDevice(void);
- void RemoveDevice(void);
-
- void BuildPackage(void);
-
- // Utilities Tab
- void DetectDevice(void);
- void ClosePcScreen(void);
-
- void SelectPitDestination(void);
- void DownloadPit(void);
-
- void DevicePrintPitToggled(bool checked);
- void LocalFilePrintPitToggled(bool checked);
- void SelectPrintPitFile(void);
- void PrintPit(void);
-
- // Heimdall Command Line
- void HandleHeimdallStdout(void);
- void HandleHeimdallReturned(int exitCode, QProcess::ExitStatus exitStatus);
- void HandleHeimdallError(QProcess::ProcessError error);
- };
-}
-
-#endif // MAINWINDOW_H
+/* Copyright (c) 2010-2014 Benjamin Dobell, Glass Echidna
+
+ Permission is hereby granted, free of charge, to any person obtaining a copy
+ of this software and associated documentation files (the "Software"), to deal
+ in the Software without restriction, including without limitation the rights
+ to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ copies of the Software, and to permit persons to whom the Software is
+ furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice shall be included in
+ all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ THE SOFTWARE.*/
+
+#ifndef MAINWINDOW_H
+#define MAINWINDOW_H
+
+// Qt
+#include <QList>
+#include <QMainWindow>
+#include <QProcess>
+#include <QTemporaryFile>
+
+// libpit
+#include "libpit.h"
+
+// Heimdall Frontend
+#include "aboutform.h"
+#include "ui_mainwindow.h"
+#include "PackageData.h"
+
+using namespace libpit;
+
+namespace HeimdallFrontend
+{
+ class MainWindow : public QMainWindow, public Ui::MainWindow
+ {
+ Q_OBJECT
+
+ private:
+
+ enum class HeimdallState
+ {
+ Stopped = 0,
+ Flashing,
+ DetectingDevice,
+ ClosingPcScreen,
+ PrintingPit,
+ DownloadingPit
+ };
+
+ enum
+ {
+ kPrintPitSourceDevice = 0,
+ kPrintPitSourceLocalFile
+ };
+
+ AboutForm aboutForm;
+
+ QString lastDirectory;
+
+ int tabIndex;
+
+ bool heimdallFailed;
+ HeimdallState heimdallState;
+ QProcess heimdallProcess;
+
+ PackageData loadedPackageData;
+
+ PitData currentPitData;
+ PackageData workingPackageData;
+
+ bool populatingPartitionNames;
+ QList<unsigned int> unusedPartitionIds;
+
+ bool verboseOutput;
+ bool resume;
+
+
+ void StartHeimdall(const QStringList& arguments);
+
+ void UpdateUnusedPartitionIds(void);
+ bool ReadPit(QFile *file);
+
+ void UpdatePackageUserInterface(void);
+
+ bool IsArchive(QString path);
+
+ QString PromptFileSelection(const QString& caption = QString("Select File"), const QString& filter = QString());
+ QString PromptFileCreation(const QString& caption = QString("Save File"), const QString& filter = QString());
+
+ void UpdateLoadPackageInterfaceAvailability(void);
+ void UpdateFlashInterfaceAvailability(void);
+ void UpdateCreatePackageInterfaceAvailability(void);
+ void UpdateUtilitiesInterfaceAvailability(void);
+ void UpdateInterfaceAvailability(void);
+
+ void UpdatePartitionNamesInterface(void);
+
+ public:
+
+ explicit MainWindow(QWidget *parent = 0);
+ ~MainWindow();
+
+ public slots:
+
+ void OpenDonationWebpage(void);
+ void SetVerboseOutput(bool enabled);
+ void ShowAbout(void);
+
+ void FunctionTabChanged(int index);
+
+ // Load Package Tab
+ void SelectFirmwarePackage(void);
+ void OpenDeveloperHomepage(void);
+ void OpenDeveloperDonationWebpage(void);
+ void LoadFirmwarePackage(void);
+
+ // Flash Tab
+ void SelectPartitionName(int index);
+ void SelectPartitionFile(void);
+
+ void SelectPartition(int row);
+ void AddPartition(void);
+ void RemovePartition(void);
+
+ void SelectPit(void);
+
+ void SetRepartition(int enabled);
+
+ void SetNoReboot(int enabled);
+ void SetResume(bool enabled);
+ void SetResume(int enabled);
+
+ void StartFlash(void);
+
+ // Create Package Tab
+ void FirmwareNameChanged(const QString& text);
+ void FirmwareVersionChanged(const QString& text);
+ void PlatformNameChanged(const QString& text);
+ void PlatformVersionChanged(const QString& text);
+
+ void HomepageUrlChanged(const QString& text);
+ void DonateUrlChanged(const QString& text);
+
+ void DeveloperNameChanged(const QString& text);
+ void SelectDeveloper(int row);
+ void AddDeveloper(void);
+ void RemoveDeveloper(void);
+
+ void DeviceInfoChanged(const QString& text);
+ void SelectDevice(int row);
+ void AddDevice(void);
+ void RemoveDevice(void);
+
+ void BuildPackage(void);
+
+ // Utilities Tab
+ void DetectDevice(void);
+ void ClosePcScreen(void);
+
+ void SelectPitDestination(void);
+ void DownloadPit(void);
+
+ void DevicePrintPitToggled(bool checked);
+ void LocalFilePrintPitToggled(bool checked);
+ void SelectPrintPitFile(void);
+ void PrintPit(void);
+
+ // Heimdall Command Line
+ void HandleHeimdallStdout(void);
+ void HandleHeimdallReturned(int exitCode, QProcess::ExitStatus exitStatus);
+ void HandleHeimdallError(QProcess::ProcessError error);
+ };
+}
+
+#endif // MAINWINDOW_H
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 16:23:25 +0100