From 46f2c1134d276944fb74584a61d90cc363aee7eb Mon Sep 17 00:00:00 2001 From: Benjamin Dobell Date: Sun, 5 Dec 2010 00:25:04 +1100 Subject: Removed the "Heimdall" folder and moved its contents to the root directory. --- Win32/Drivers/zadig.exe | Bin 0 -> 6048589 bytes Win32/README.txt | 107 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 107 insertions(+) create mode 100755 Win32/Drivers/zadig.exe create mode 100644 Win32/README.txt (limited to 'Win32') diff --git a/Win32/Drivers/zadig.exe b/Win32/Drivers/zadig.exe new file mode 100755 index 0000000..a6b126d Binary files /dev/null and b/Win32/Drivers/zadig.exe differ diff --git a/Win32/README.txt b/Win32/README.txt new file mode 100644 index 0000000..683e34a --- /dev/null +++ b/Win32/README.txt @@ -0,0 +1,107 @@ +Heimdall (c) 2010 Benjamin Dobell, Glass Echidna +http://www.glassechidna.com.au/products/heimdall/ + +DISCLAIMER: + + This software attempts to flash your Galaxy S device. The very nature of + flashing is dangerous. As with all flashing software, Heimdall has the + potential to damage (brick) your phone if not used carefully. If you're + concerned, don't use this software. Flashing ROMs onto your phone may also + void your warranty. I am not responsible for the result of your actions. + + + +These instructions were written for Windows Vista / Server 2008 however the producedure +should be essentially the same for all supported versions of Windows (XP onwards). + +Driver Installation Instructions: + + 1. Put your Samsung Galaxy S into download mode and plug it in. + + 2. Run zadig.exe included in the Drivers subdirectory. + + 3. From the menu chose Options -> List All Devices. + + 4. From the USB Device list chose "Samsung USB Composite DEvice". + + 5. Press "Install Driver", click "Yes" to the prompt and if you receive + a message about being unable to verify the publisher of the driver + click "Install this driver software anyway". + + 6. Done + + +Driver Uninstallation Instructions: + + 1. Put your Samsung Galaxy S into download mode by holding Volume Down + Home + Power. + + 2. Plug your phone into your PC. + + 3. Open up Device Manager on your PC (Control Panel -> System -> Device Manager). + + 4. Under Universal Serial Bus Controllers right click on "Heimdall Galaxy S Driver" and chose Properties. + + 5. Go to the Driver tab and select Update Driver. + + 6. Chose to browse your computer for the driver. + + 7. Chose to pick from a list of devices drivers on your computer. + + 8. Pick the original Samsung Composite driver, press next and then follow the prompts. + + 9. Done + + + +Flashing Firmware with Heimdall Frontend: + + 1. Fully charge your device (use the wall charger as it's faster). + + 2. Download a decrypted Samsung Galaxy S ROM and extract it to a directory. + + 3. If the ROM is provided as one of more archives (nested or otherwise), + extract them all to the same location. + + NOTE: If you want to use the CSC then extract it last. + + 3. Open Heimdall Frontend. + + 4. Put your Galaxy S device into download mode and plug it in. + + 5. For each file you wish to flash use "Browse" to select the file. + + 6. Press "Start". + + 7. Heimdall Frontend will display the progress and inform you when the + flash is complete. + + + +Flashing Firmware from Command Prompt: + + 1. Fully charge your phone (use the wall charger as it's faster). + + 2. Download a decrypted Samsung Galaxy S ROM and extract it to a directory. + + 3. If the ROM is provided as one of more archives (nested or otherwise), + extract them all to the same location. + + NOTE: If you want to use the CSC then extract it last. + + 4. Put your Galaxy S device into download mode and plug it in.. + + 5. Open command prompt and navigate to the directory where you extracted the + ROM files. + + 6. Type the following to list all the functionality Heimdall supports: + + heimdall help + + 7. Use the instructions to manually enter a command with all the files you + want to flash. + + Here is an example that does a full flash and repartition: + + heimdall flash --repartition --pit s1_odin_20100512.pit --factoryfs factoryfs.rfs --cache cache.rfs --dbdata dbdata.rfs --primary-boot boot.bin --secondary-boot Sbl.bin --param param.lfs --kernel zImage --modem modem.bin + + 8. Done -- cgit v1.2.3