summaryrefslogtreecommitdiffstats
path: root/libjpegtwrp
diff options
context:
space:
mode:
authorDees_Troy <dees_troy@teamw.in>2013-08-11 00:19:03 +0200
committerDees_Troy <dees_troy@teamw.in>2013-08-11 00:19:03 +0200
commit930bf01caf3cbcabf97444b3071bcaff28597635 (patch)
treeec602b8261c9a40ef37e4530c075940bcce0bf2d /libjpegtwrp
parentRemove unneeded touch code changes (diff)
downloadandroid_bootable_recovery-930bf01caf3cbcabf97444b3071bcaff28597635.tar
android_bootable_recovery-930bf01caf3cbcabf97444b3071bcaff28597635.tar.gz
android_bootable_recovery-930bf01caf3cbcabf97444b3071bcaff28597635.tar.bz2
android_bootable_recovery-930bf01caf3cbcabf97444b3071bcaff28597635.tar.lz
android_bootable_recovery-930bf01caf3cbcabf97444b3071bcaff28597635.tar.xz
android_bootable_recovery-930bf01caf3cbcabf97444b3071bcaff28597635.tar.zst
android_bootable_recovery-930bf01caf3cbcabf97444b3071bcaff28597635.zip
Diffstat (limited to '')
-rwxr-xr-xlibjpegtwrp/Android.mk77
-rw-r--r--libjpegtwrp/CleanSpec.mk49
-rw-r--r--libjpegtwrp/MODULE_LICENSE_BSD_LIKE0
-rw-r--r--libjpegtwrp/NOTICE38
-rw-r--r--libjpegtwrp/README385
-rw-r--r--libjpegtwrp/README-VeNum20
-rw-r--r--libjpegtwrp/ThirdPartyProject.prop9
-rw-r--r--libjpegtwrp/ansi2knr.136
-rw-r--r--libjpegtwrp/ansi2knr.c693
-rw-r--r--libjpegtwrp/armv6_idct.S366
-rw-r--r--libjpegtwrp/asm/armv7/jdcolor-android-armv7.S1223
-rw-r--r--libjpegtwrp/asm/armv7/jdcolor-armv7.S632
-rw-r--r--libjpegtwrp/asm/armv7/jdidct-armv7.S762
-rw-r--r--libjpegtwrp/cderror.h132
-rw-r--r--libjpegtwrp/cdjpeg.c181
-rw-r--r--libjpegtwrp/cdjpeg.h184
-rw-r--r--libjpegtwrp/change.log217
-rw-r--r--libjpegtwrp/cjpeg.1292
-rw-r--r--libjpegtwrp/cjpeg.c606
-rw-r--r--libjpegtwrp/ckconfig.c402
-rw-r--r--libjpegtwrp/coderules.doc118
-rwxr-xr-xlibjpegtwrp/config.guess883
-rwxr-xr-xlibjpegtwrp/config.sub954
-rwxr-xr-xlibjpegtwrp/configure2011
-rw-r--r--libjpegtwrp/djpeg.1253
-rw-r--r--libjpegtwrp/djpeg.c616
-rw-r--r--libjpegtwrp/example.c433
-rw-r--r--libjpegtwrp/filelist.doc210
-rwxr-xr-xlibjpegtwrp/install-sh250
-rw-r--r--libjpegtwrp/install.doc1063
-rw-r--r--libjpegtwrp/jcapimin.c280
-rw-r--r--libjpegtwrp/jcapistd.c161
-rw-r--r--libjpegtwrp/jccoefct.c449
-rw-r--r--libjpegtwrp/jccolor.c527
-rw-r--r--libjpegtwrp/jcdctmgr.c387
-rw-r--r--libjpegtwrp/jchuff.c909
-rw-r--r--libjpegtwrp/jchuff.h47
-rw-r--r--libjpegtwrp/jcinit.c72
-rw-r--r--libjpegtwrp/jcmainct.c293
-rw-r--r--libjpegtwrp/jcmarker.c664
-rw-r--r--libjpegtwrp/jcmaster.c590
-rw-r--r--libjpegtwrp/jcomapi.c106
-rw-r--r--libjpegtwrp/jconfig.bcc48
-rw-r--r--libjpegtwrp/jconfig.cfg44
-rw-r--r--libjpegtwrp/jconfig.dj38
-rw-r--r--libjpegtwrp/jconfig.doc155
-rw-r--r--libjpegtwrp/jconfig.h156
-rw-r--r--libjpegtwrp/jconfig.mac43
-rw-r--r--libjpegtwrp/jconfig.manx43
-rw-r--r--libjpegtwrp/jconfig.mc652
-rw-r--r--libjpegtwrp/jconfig.sas43
-rw-r--r--libjpegtwrp/jconfig.st42
-rw-r--r--libjpegtwrp/jconfig.vc45
-rw-r--r--libjpegtwrp/jconfig.vms37
-rw-r--r--libjpegtwrp/jconfig.wat38
-rw-r--r--libjpegtwrp/jcparam.c614
-rw-r--r--libjpegtwrp/jcphuff.c833
-rw-r--r--libjpegtwrp/jcprepct.c354
-rw-r--r--libjpegtwrp/jcsample.c519
-rw-r--r--libjpegtwrp/jctrans.c395
-rw-r--r--libjpegtwrp/jdapimin.c401
-rw-r--r--libjpegtwrp/jdapistd.c397
-rw-r--r--libjpegtwrp/jdatadst.c151
-rw-r--r--libjpegtwrp/jdatasrc.c212
-rw-r--r--libjpegtwrp/jdcoefct.c1038
-rw-r--r--libjpegtwrp/jdcolor.c976
-rw-r--r--libjpegtwrp/jdct.h176
-rw-r--r--libjpegtwrp/jddctmgr.c335
-rw-r--r--libjpegtwrp/jdhuff.c894
-rw-r--r--libjpegtwrp/jdhuff.h202
-rw-r--r--libjpegtwrp/jdinput.c415
-rw-r--r--libjpegtwrp/jdmainct.c512
-rw-r--r--libjpegtwrp/jdmarker.c1397
-rw-r--r--libjpegtwrp/jdmaster.c580
-rw-r--r--libjpegtwrp/jdmerge.c902
-rw-r--r--libjpegtwrp/jdphuff.c770
-rw-r--r--libjpegtwrp/jdpostct.c290
-rw-r--r--libjpegtwrp/jdsample.c478
-rw-r--r--libjpegtwrp/jdtrans.c271
-rw-r--r--libjpegtwrp/jerror.c252
-rw-r--r--libjpegtwrp/jerror.h291
-rw-r--r--libjpegtwrp/jfdctflt.c168
-rw-r--r--libjpegtwrp/jfdctfst.c224
-rw-r--r--libjpegtwrp/jfdctint.c283
-rw-r--r--libjpegtwrp/jidctflt.c242
-rw-r--r--libjpegtwrp/jidctfst.c368
-rw-r--r--libjpegtwrp/jidctint.c389
-rw-r--r--libjpegtwrp/jidctred.c398
-rw-r--r--libjpegtwrp/jidctvenum.c229
-rw-r--r--libjpegtwrp/jinclude.h91
-rw-r--r--libjpegtwrp/jmem-android.c186
-rw-r--r--libjpegtwrp/jmem-ashmem.c170
-rw-r--r--libjpegtwrp/jmemansi.c167
-rw-r--r--libjpegtwrp/jmemdos.c638
-rw-r--r--libjpegtwrp/jmemdosa.asm379
-rw-r--r--libjpegtwrp/jmemmac.c289
-rw-r--r--libjpegtwrp/jmemmgr.c1118
-rw-r--r--libjpegtwrp/jmemname.c276
-rw-r--r--libjpegtwrp/jmemnobs.c109
-rw-r--r--libjpegtwrp/jmemsys.h204
-rw-r--r--libjpegtwrp/jmorecfg.h387
-rw-r--r--libjpegtwrp/jpegint.h475
-rw-r--r--libjpegtwrp/jpeglib.h1184
-rw-r--r--libjpegtwrp/jpegtran.1238
-rw-r--r--libjpegtwrp/jpegtran.c504
-rw-r--r--libjpegtwrp/jquant1.c856
-rw-r--r--libjpegtwrp/jquant2.c1310
-rw-r--r--libjpegtwrp/jutils.c185
-rw-r--r--libjpegtwrp/jversion.h14
-rw-r--r--libjpegtwrp/libjpeg.doc3006
-rwxr-xr-xlibjpegtwrp/ltconfig1512
-rw-r--r--libjpegtwrp/ltmain.sh2453
-rw-r--r--libjpegtwrp/makcjpeg.st38
-rw-r--r--libjpegtwrp/makdjpeg.st38
-rw-r--r--libjpegtwrp/makeapps.ds828
-rw-r--r--libjpegtwrp/makefile.ansi214
-rw-r--r--libjpegtwrp/makefile.bcc285
-rw-r--r--libjpegtwrp/makefile.cfg319
-rw-r--r--libjpegtwrp/makefile.dj220
-rw-r--r--libjpegtwrp/makefile.manx214
-rw-r--r--libjpegtwrp/makefile.mc6249
-rw-r--r--libjpegtwrp/makefile.mms218
-rw-r--r--libjpegtwrp/makefile.sas252
-rw-r--r--libjpegtwrp/makefile.unix228
-rw-r--r--libjpegtwrp/makefile.vc211
-rw-r--r--libjpegtwrp/makefile.vms142
-rw-r--r--libjpegtwrp/makefile.wat233
-rw-r--r--libjpegtwrp/makelib.ds1046
-rw-r--r--libjpegtwrp/makeproj.mac213
-rw-r--r--libjpegtwrp/makljpeg.st70
-rw-r--r--libjpegtwrp/maktjpeg.st32
-rw-r--r--libjpegtwrp/makvms.opt4
-rw-r--r--libjpegtwrp/rdbmp.c439
-rw-r--r--libjpegtwrp/rdcolmap.c253
-rw-r--r--libjpegtwrp/rdgif.c38
-rw-r--r--libjpegtwrp/rdjpgcom.154
-rw-r--r--libjpegtwrp/rdjpgcom.c496
-rw-r--r--libjpegtwrp/rdppm.c458
-rw-r--r--libjpegtwrp/rdrle.c387
-rw-r--r--libjpegtwrp/rdswitch.c332
-rw-r--r--libjpegtwrp/rdtarga.c500
-rw-r--r--libjpegtwrp/structure.doc948
-rw-r--r--libjpegtwrp/testimg.bmpbin35050 -> 0 bytes
-rw-r--r--libjpegtwrp/testimg.jpgbin5756 -> 0 bytes
-rw-r--r--libjpegtwrp/testimg.ppm4
-rw-r--r--libjpegtwrp/testimgp.jpgbin5645 -> 0 bytes
-rw-r--r--libjpegtwrp/testorig.jpgbin5770 -> 0 bytes
-rw-r--r--libjpegtwrp/testprog.jpgbin5655 -> 0 bytes
-rw-r--r--libjpegtwrp/transupp.c928
-rw-r--r--libjpegtwrp/transupp.h135
-rw-r--r--libjpegtwrp/usage.doc562
-rw-r--r--libjpegtwrp/wizard.doc211
-rw-r--r--libjpegtwrp/wrbmp.c442
-rw-r--r--libjpegtwrp/wrgif.c399
-rw-r--r--libjpegtwrp/wrjpgcom.1103
-rw-r--r--libjpegtwrp/wrjpgcom.c583
-rw-r--r--libjpegtwrp/wrppm.c268
-rw-r--r--libjpegtwrp/wrrle.c305
-rw-r--r--libjpegtwrp/wrtarga.c253
159 files changed, 0 insertions, 63223 deletions
diff --git a/libjpegtwrp/Android.mk b/libjpegtwrp/Android.mk
deleted file mode 100755
index 98b253958..000000000
--- a/libjpegtwrp/Android.mk
+++ /dev/null
@@ -1,77 +0,0 @@
-LOCAL_PATH:= $(call my-dir)
-include $(CLEAR_VARS)
-
-LOCAL_ARM_MODE := arm
-
-# Set ANDROID_JPEG_USE_VENUM to true to enable VeNum optimizations
-ANDROID_JPEG_USE_VENUM := true
-
-# Disable VeNum optimizations if they are not supported on the build target
-ifneq ($(ARCH_ARM_HAVE_VFP),true)
-ANDROID_JPEG_USE_VENUM := false
-else
-ifneq ($(ARCH_ARM_HAVE_NEON),true)
-ANDROID_JPEG_USE_VENUM := false
-endif
-endif
-
-LOCAL_SRC_FILES := \
- jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
- jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
- jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
- jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
- jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
- jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
- jfdctint.c jidctflt.c jquant1.c \
- jquant2.c jutils.c jmemmgr.c \
-
-# use ashmem as libjpeg decoder's backing store
-LOCAL_CFLAGS += -DUSE_ANDROID_ASHMEM
-LOCAL_SRC_FILES += \
- jmem-ashmem.c
-
-# the original android memory manager.
-# use sdcard as libjpeg decoder's backing store
-#LOCAL_SRC_FILES += \
-# jmem-android.c
-
-
-# the assembler is only for the ARM version, don't break the Linux sim
-ifneq ($(TARGET_ARCH),arm)
-ANDROID_JPEG_NO_ASSEMBLER := true
-endif
-
-ifeq ($(strip $(ANDROID_JPEG_NO_ASSEMBLER)),true)
-LOCAL_SRC_FILES += jidctint.c jidctfst.c jidctred.c
-else
-ifeq ($(ANDROID_JPEG_USE_VENUM),true)
-LOCAL_SRC_FILES += jidctvenum.c
-LOCAL_SRC_FILES += asm/armv7/jdcolor-armv7.S
-LOCAL_SRC_FILES += asm/armv7/jdcolor-android-armv7.S
-LOCAL_SRC_FILES += asm/armv7/jdidct-armv7.S
-LOCAL_CFLAGS += -DANDROID_JPEG_USE_VENUM
-else # ANDROID_JPEG_USE_VENUM, false
-LOCAL_SRC_FILES += jidctint.c jidctred.c jidctfst.c armv6_idct.S
-LOCAL_CFLAGS += -DANDROID_ARMV6_IDCT
-endif # ANDROID_JPEG_USE_VENUM
-endif
-
-LOCAL_CFLAGS += -DAVOID_TABLES
-LOCAL_CFLAGS += -O3 -fstrict-aliasing -fprefetch-loop-arrays
-
-# enable tile based decode
-LOCAL_CFLAGS += -DANDROID_TILE_BASED_DECODE
-
-ifdef NEEDS_ARM_ERRATA_754319_754320
-asm_flags := \
- --defsym NEEDS_ARM_ERRATA_754319_754320_ASM=1
-
-LOCAL_CFLAGS+= \
- $(foreach f,$(asm_flags),-Wa,"$(f)")
-endif
-LOCAL_MODULE_TAGS := eng
-LOCAL_SHARED_LIBRARIES += libcutils
-LOCAL_MODULE:= libjpegtwrp
-
-include $(BUILD_STATIC_LIBRARY)
-
diff --git a/libjpegtwrp/CleanSpec.mk b/libjpegtwrp/CleanSpec.mk
deleted file mode 100644
index b84e1b65e..000000000
--- a/libjpegtwrp/CleanSpec.mk
+++ /dev/null
@@ -1,49 +0,0 @@
-# Copyright (C) 2007 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# If you don't need to do a full clean build but would like to touch
-# a file or delete some intermediate files, add a clean step to the end
-# of the list. These steps will only be run once, if they haven't been
-# run before.
-#
-# E.g.:
-# $(call add-clean-step, touch -c external/sqlite/sqlite3.h)
-# $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates)
-#
-# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with
-# files that are missing or have been moved.
-#
-# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.
-# Use $(OUT_DIR) to refer to the "out" directory.
-#
-# If you need to re-do something that's already mentioned, just copy
-# the command and add it to the bottom of the list. E.g., if a change
-# that you made last week required touching a file and a change you
-# made today requires touching the same file, just copy the old
-# touch step and add it to the end of the list.
-#
-# ************************************************
-# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
-# ************************************************
-
-# For example:
-#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)
-#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)
-#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f)
-#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)
-
-# ************************************************
-# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
-# ************************************************
diff --git a/libjpegtwrp/MODULE_LICENSE_BSD_LIKE b/libjpegtwrp/MODULE_LICENSE_BSD_LIKE
deleted file mode 100644
index e69de29bb..000000000
--- a/libjpegtwrp/MODULE_LICENSE_BSD_LIKE
+++ /dev/null
diff --git a/libjpegtwrp/NOTICE b/libjpegtwrp/NOTICE
deleted file mode 100644
index 007625fec..000000000
--- a/libjpegtwrp/NOTICE
+++ /dev/null
@@ -1,38 +0,0 @@
-This software is based in part on the work of the Independent JPEG Group.
-
-----------------------
-
-The authors make NO WARRANTY or representation, either express or implied,
-with respect to this software, its quality, accuracy, merchantability, or
-fitness for a particular purpose. This software is provided "AS IS", and you,
-its user, assume the entire risk as to its quality and accuracy.
-
-This software is copyright (C) 1991-1998, Thomas G. Lane.
-All Rights Reserved except as specified below.
-
-Permission is hereby granted to use, copy, modify, and distribute this
-software (or portions thereof) for any purpose, without fee, subject to these
-conditions:
-(1) If any part of the source code for this software is distributed, then this
-README file must be included, with this copyright and no-warranty notice
-unaltered; and any additions, deletions, or changes to the original files
-must be clearly indicated in accompanying documentation.
-(2) If only executable code is distributed, then the accompanying
-documentation must state that "this software is based in part on the work of
-the Independent JPEG Group".
-(3) Permission for use of this software is granted only if the user accepts
-full responsibility for any undesirable consequences; the authors accept
-NO LIABILITY for damages of any kind.
-
-These conditions apply to any software derived from or based on the IJG code,
-not just to the unmodified library. If you use our work, you ought to
-acknowledge us.
-
-Permission is NOT granted for the use of any IJG author's name or company name
-in advertising or publicity relating to this software or products derived from
-it. This software may be referred to only as "the Independent JPEG Group's
-software".
-
-We specifically permit and encourage the use of this software as the basis of
-commercial products, provided that all warranty or liability claims are
-assumed by the product vendor.
diff --git a/libjpegtwrp/README b/libjpegtwrp/README
deleted file mode 100644
index 86cc20669..000000000
--- a/libjpegtwrp/README
+++ /dev/null
@@ -1,385 +0,0 @@
-The Independent JPEG Group's JPEG software
-==========================================
-
-README for release 6b of 27-Mar-1998
-====================================
-
-This distribution contains the sixth public release of the Independent JPEG
-Group's free JPEG software. You are welcome to redistribute this software and
-to use it for any purpose, subject to the conditions under LEGAL ISSUES, below.
-
-Serious users of this software (particularly those incorporating it into
-larger programs) should contact IJG at jpeg-info@uunet.uu.net to be added to
-our electronic mailing list. Mailing list members are notified of updates
-and have a chance to participate in technical discussions, etc.
-
-This software is the work of Tom Lane, Philip Gladstone, Jim Boucher,
-Lee Crocker, Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi,
-Guido Vollbeding, Ge' Weijers, and other members of the Independent JPEG
-Group.
-
-IJG is not affiliated with the official ISO JPEG standards committee.
-
-
-DOCUMENTATION ROADMAP
-=====================
-
-This file contains the following sections:
-
-OVERVIEW General description of JPEG and the IJG software.
-LEGAL ISSUES Copyright, lack of warranty, terms of distribution.
-REFERENCES Where to learn more about JPEG.
-ARCHIVE LOCATIONS Where to find newer versions of this software.
-RELATED SOFTWARE Other stuff you should get.
-FILE FORMAT WARS Software *not* to get.
-TO DO Plans for future IJG releases.
-
-Other documentation files in the distribution are:
-
-User documentation:
- install.doc How to configure and install the IJG software.
- usage.doc Usage instructions for cjpeg, djpeg, jpegtran,
- rdjpgcom, and wrjpgcom.
- *.1 Unix-style man pages for programs (same info as usage.doc).
- wizard.doc Advanced usage instructions for JPEG wizards only.
- change.log Version-to-version change highlights.
-Programmer and internal documentation:
- libjpeg.doc How to use the JPEG library in your own programs.
- example.c Sample code for calling the JPEG library.
- structure.doc Overview of the JPEG library's internal structure.
- filelist.doc Road map of IJG files.
- coderules.doc Coding style rules --- please read if you contribute code.
-
-Please read at least the files install.doc and usage.doc. Useful information
-can also be found in the JPEG FAQ (Frequently Asked Questions) article. See
-ARCHIVE LOCATIONS below to find out where to obtain the FAQ article.
-
-If you want to understand how the JPEG code works, we suggest reading one or
-more of the REFERENCES, then looking at the documentation files (in roughly
-the order listed) before diving into the code.
-
-
-OVERVIEW
-========
-
-This package contains C software to implement JPEG image compression and
-decompression. JPEG (pronounced "jay-peg") is a standardized compression
-method for full-color and gray-scale images. JPEG is intended for compressing
-"real-world" scenes; line drawings, cartoons and other non-realistic images
-are not its strong suit. JPEG is lossy, meaning that the output image is not
-exactly identical to the input image. Hence you must not use JPEG if you
-have to have identical output bits. However, on typical photographic images,
-very good compression levels can be obtained with no visible change, and
-remarkably high compression levels are possible if you can tolerate a
-low-quality image. For more details, see the references, or just experiment
-with various compression settings.
-
-This software implements JPEG baseline, extended-sequential, and progressive
-compression processes. Provision is made for supporting all variants of these
-processes, although some uncommon parameter settings aren't implemented yet.
-For legal reasons, we are not distributing code for the arithmetic-coding
-variants of JPEG; see LEGAL ISSUES. We have made no provision for supporting
-the hierarchical or lossless processes defined in the standard.
-
-We provide a set of library routines for reading and writing JPEG image files,
-plus two sample applications "cjpeg" and "djpeg", which use the library to
-perform conversion between JPEG and some other popular image file formats.
-The library is intended to be reused in other applications.
-
-In order to support file conversion and viewing software, we have included
-considerable functionality beyond the bare JPEG coding/decoding capability;
-for example, the color quantization modules are not strictly part of JPEG
-decoding, but they are essential for output to colormapped file formats or
-colormapped displays. These extra functions can be compiled out of the
-library if not required for a particular application. We have also included
-"jpegtran", a utility for lossless transcoding between different JPEG
-processes, and "rdjpgcom" and "wrjpgcom", two simple applications for
-inserting and extracting textual comments in JFIF files.
-
-The emphasis in designing this software has been on achieving portability and
-flexibility, while also making it fast enough to be useful. In particular,
-the software is not intended to be read as a tutorial on JPEG. (See the
-REFERENCES section for introductory material.) Rather, it is intended to
-be reliable, portable, industrial-strength code. We do not claim to have
-achieved that goal in every aspect of the software, but we strive for it.
-
-We welcome the use of this software as a component of commercial products.
-No royalty is required, but we do ask for an acknowledgement in product
-documentation, as described under LEGAL ISSUES.
-
-
-LEGAL ISSUES
-============
-
-In plain English:
-
-1. We don't promise that this software works. (But if you find any bugs,
- please let us know!)
-2. You can use this software for whatever you want. You don't have to pay us.
-3. You may not pretend that you wrote this software. If you use it in a
- program, you must acknowledge somewhere in your documentation that
- you've used the IJG code.
-
-In legalese:
-
-The authors make NO WARRANTY or representation, either express or implied,
-with respect to this software, its quality, accuracy, merchantability, or
-fitness for a particular purpose. This software is provided "AS IS", and you,
-its user, assume the entire risk as to its quality and accuracy.
-
-This software is copyright (C) 1991-1998, Thomas G. Lane.
-All Rights Reserved except as specified below.
-
-Permission is hereby granted to use, copy, modify, and distribute this
-software (or portions thereof) for any purpose, without fee, subject to these
-conditions:
-(1) If any part of the source code for this software is distributed, then this
-README file must be included, with this copyright and no-warranty notice
-unaltered; and any additions, deletions, or changes to the original files
-must be clearly indicated in accompanying documentation.
-(2) If only executable code is distributed, then the accompanying
-documentation must state that "this software is based in part on the work of
-the Independent JPEG Group".
-(3) Permission for use of this software is granted only if the user accepts
-full responsibility for any undesirable consequences; the authors accept
-NO LIABILITY for damages of any kind.
-
-These conditions apply to any software derived from or based on the IJG code,
-not just to the unmodified library. If you use our work, you ought to
-acknowledge us.
-
-Permission is NOT granted for the use of any IJG author's name or company name
-in advertising or publicity relating to this software or products derived from
-it. This software may be referred to only as "the Independent JPEG Group's
-software".
-
-We specifically permit and encourage the use of this software as the basis of
-commercial products, provided that all warranty or liability claims are
-assumed by the product vendor.
-
-
-ansi2knr.c is included in this distribution by permission of L. Peter Deutsch,
-sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA.
-ansi2knr.c is NOT covered by the above copyright and conditions, but instead
-by the usual distribution terms of the Free Software Foundation; principally,
-that you must include source code if you redistribute it. (See the file
-ansi2knr.c for full details.) However, since ansi2knr.c is not needed as part
-of any program generated from the IJG code, this does not limit you more than
-the foregoing paragraphs do.
-
-The Unix configuration script "configure" was produced with GNU Autoconf.
-It is copyright by the Free Software Foundation but is freely distributable.
-The same holds for its supporting scripts (config.guess, config.sub,
-ltconfig, ltmain.sh). Another support script, install-sh, is copyright
-by M.I.T. but is also freely distributable.
-
-It appears that the arithmetic coding option of the JPEG spec is covered by
-patents owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot
-legally be used without obtaining one or more licenses. For this reason,
-support for arithmetic coding has been removed from the free JPEG software.
-(Since arithmetic coding provides only a marginal gain over the unpatented
-Huffman mode, it is unlikely that very many implementations will support it.)
-So far as we are aware, there are no patent restrictions on the remaining
-code.
-
-The IJG distribution formerly included code to read and write GIF files.
-To avoid entanglement with the Unisys LZW patent, GIF reading support has
-been removed altogether, and the GIF writer has been simplified to produce
-"uncompressed GIFs". This technique does not use the LZW algorithm; the
-resulting GIF files are larger than usual, but are readable by all standard
-GIF decoders.
-
-We are required to state that
- "The Graphics Interchange Format(c) is the Copyright property of
- CompuServe Incorporated. GIF(sm) is a Service Mark property of
- CompuServe Incorporated."
-
-
-REFERENCES
-==========
-
-We highly recommend reading one or more of these references before trying to
-understand the innards of the JPEG software.
-
-The best short technical introduction to the JPEG compression algorithm is
- Wallace, Gregory K. "The JPEG Still Picture Compression Standard",
- Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44.
-(Adjacent articles in that issue discuss MPEG motion picture compression,
-applications of JPEG, and related topics.) If you don't have the CACM issue
-handy, a PostScript file containing a revised version of Wallace's article is
-available at ftp://ftp.uu.net/graphics/jpeg/wallace.ps.gz. The file (actually
-a preprint for an article that appeared in IEEE Trans. Consumer Electronics)
-omits the sample images that appeared in CACM, but it includes corrections
-and some added material. Note: the Wallace article is copyright ACM and IEEE,
-and it may not be used for commercial purposes.
-
-A somewhat less technical, more leisurely introduction to JPEG can be found in
-"The Data Compression Book" by Mark Nelson and Jean-loup Gailly, published by
-M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1. This book provides
-good explanations and example C code for a multitude of compression methods
-including JPEG. It is an excellent source if you are comfortable reading C
-code but don't know much about data compression in general. The book's JPEG
-sample code is far from industrial-strength, but when you are ready to look
-at a full implementation, you've got one here...
-
-The best full description of JPEG is the textbook "JPEG Still Image Data
-Compression Standard" by William B. Pennebaker and Joan L. Mitchell, published
-by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1. Price US$59.95, 638 pp.
-The book includes the complete text of the ISO JPEG standards (DIS 10918-1
-and draft DIS 10918-2). This is by far the most complete exposition of JPEG
-in existence, and we highly recommend it.
-
-The JPEG standard itself is not available electronically; you must order a
-paper copy through ISO or ITU. (Unless you feel a need to own a certified
-official copy, we recommend buying the Pennebaker and Mitchell book instead;
-it's much cheaper and includes a great deal of useful explanatory material.)
-In the USA, copies of the standard may be ordered from ANSI Sales at (212)
-642-4900, or from Global Engineering Documents at (800) 854-7179. (ANSI
-doesn't take credit card orders, but Global does.) It's not cheap: as of
-1992, ANSI was charging $95 for Part 1 and $47 for Part 2, plus 7%
-shipping/handling. The standard is divided into two parts, Part 1 being the
-actual specification, while Part 2 covers compliance testing methods. Part 1
-is titled "Digital Compression and Coding of Continuous-tone Still Images,
-Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS
-10918-1, ITU-T T.81. Part 2 is titled "Digital Compression and Coding of
-Continuous-tone Still Images, Part 2: Compliance testing" and has document
-numbers ISO/IEC IS 10918-2, ITU-T T.83.
-
-Some extensions to the original JPEG standard are defined in JPEG Part 3,
-a newer ISO standard numbered ISO/IEC IS 10918-3 and ITU-T T.84. IJG
-currently does not support any Part 3 extensions.
-
-The JPEG standard does not specify all details of an interchangeable file
-format. For the omitted details we follow the "JFIF" conventions, revision
-1.02. A copy of the JFIF spec is available from:
- Literature Department
- C-Cube Microsystems, Inc.
- 1778 McCarthy Blvd.
- Milpitas, CA 95035
- phone (408) 944-6300, fax (408) 944-6314
-A PostScript version of this document is available by FTP at
-ftp://ftp.uu.net/graphics/jpeg/jfif.ps.gz. There is also a plain text
-version at ftp://ftp.uu.net/graphics/jpeg/jfif.txt.gz, but it is missing
-the figures.
-
-The TIFF 6.0 file format specification can be obtained by FTP from
-ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz. The JPEG incorporation scheme
-found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems.
-IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6).
-Instead, we recommend the JPEG design proposed by TIFF Technical Note #2
-(Compression tag 7). Copies of this Note can be obtained from ftp.sgi.com or
-from ftp://ftp.uu.net/graphics/jpeg/. It is expected that the next revision
-of the TIFF spec will replace the 6.0 JPEG design with the Note's design.
-Although IJG's own code does not support TIFF/JPEG, the free libtiff library
-uses our library to implement TIFF/JPEG per the Note. libtiff is available
-from ftp://ftp.sgi.com/graphics/tiff/.
-
-
-ARCHIVE LOCATIONS
-=================
-
-The "official" archive site for this software is ftp.uu.net (Internet
-address 192.48.96.9). The most recent released version can always be found
-there in directory graphics/jpeg. This particular version will be archived
-as ftp://ftp.uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz. If you don't have
-direct Internet access, UUNET's archives are also available via UUCP; contact
-help@uunet.uu.net for information on retrieving files that way.
-
-Numerous Internet sites maintain copies of the UUNET files. However, only
-ftp.uu.net is guaranteed to have the latest official version.
-
-You can also obtain this software in DOS-compatible "zip" archive format from
-the SimTel archives (ftp://ftp.simtel.net/pub/simtelnet/msdos/graphics/), or
-on CompuServe in the Graphics Support forum (GO CIS:GRAPHSUP), library 12
-"JPEG Tools". Again, these versions may sometimes lag behind the ftp.uu.net
-release.
-
-The JPEG FAQ (Frequently Asked Questions) article is a useful source of
-general information about JPEG. It is updated constantly and therefore is
-not included in this distribution. The FAQ is posted every two weeks to
-Usenet newsgroups comp.graphics.misc, news.answers, and other groups.
-It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/
-and other news.answers archive sites, including the official news.answers
-archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/.
-If you don't have Web or FTP access, send e-mail to mail-server@rtfm.mit.edu
-with body
- send usenet/news.answers/jpeg-faq/part1
- send usenet/news.answers/jpeg-faq/part2
-
-
-RELATED SOFTWARE
-================
-
-Numerous viewing and image manipulation programs now support JPEG. (Quite a
-few of them use this library to do so.) The JPEG FAQ described above lists
-some of the more popular free and shareware viewers, and tells where to
-obtain them on Internet.
-
-If you are on a Unix machine, we highly recommend Jef Poskanzer's free
-PBMPLUS software, which provides many useful operations on PPM-format image
-files. In particular, it can convert PPM images to and from a wide range of
-other formats, thus making cjpeg/djpeg considerably more useful. The latest
-version is distributed by the NetPBM group, and is available from numerous
-sites, notably ftp://wuarchive.wustl.edu/graphics/graphics/packages/NetPBM/.
-Unfortunately PBMPLUS/NETPBM is not nearly as portable as the IJG software is;
-you are likely to have difficulty making it work on any non-Unix machine.
-
-A different free JPEG implementation, written by the PVRG group at Stanford,
-is available from ftp://havefun.stanford.edu/pub/jpeg/. This program
-is designed for research and experimentation rather than production use;
-it is slower, harder to use, and less portable than the IJG code, but it
-is easier to read and modify. Also, the PVRG code supports lossless JPEG,
-which we do not. (On the other hand, it doesn't do progressive JPEG.)
-
-
-FILE FORMAT WARS
-================
-
-Some JPEG programs produce files that are not compatible with our library.
-The root of the problem is that the ISO JPEG committee failed to specify a
-concrete file format. Some vendors "filled in the blanks" on their own,
-creating proprietary formats that no one else could read. (For example, none
-of the early commercial JPEG implementations for the Macintosh were able to
-exchange compressed files.)
-
-The file format we have adopted is called JFIF (see REFERENCES). This format
-has been agreed to by a number of major commercial JPEG vendors, and it has
-become the de facto standard. JFIF is a minimal or "low end" representation.
-We recommend the use of TIFF/JPEG (TIFF revision 6.0 as modified by TIFF
-Technical Note #2) for "high end" applications that need to record a lot of
-additional data about an image. TIFF/JPEG is fairly new and not yet widely
-supported, unfortunately.
-
-The upcoming JPEG Part 3 standard defines a file format called SPIFF.
-SPIFF is interoperable with JFIF, in the sense that most JFIF decoders should
-be able to read the most common variant of SPIFF. SPIFF has some technical
-advantages over JFIF, but its major claim to fame is simply that it is an
-official standard rather than an informal one. At this point it is unclear
-whether SPIFF will supersede JFIF or whether JFIF will remain the de-facto
-standard. IJG intends to support SPIFF once the standard is frozen, but we
-have not decided whether it should become our default output format or not.
-(In any case, our decoder will remain capable of reading JFIF indefinitely.)
-
-Various proprietary file formats incorporating JPEG compression also exist.
-We have little or no sympathy for the existence of these formats. Indeed,
-one of the original reasons for developing this free software was to help
-force convergence on common, open format standards for JPEG files. Don't
-use a proprietary file format!
-
-
-TO DO
-=====
-
-The major thrust for v7 will probably be improvement of visual quality.
-The current method for scaling the quantization tables is known not to be
-very good at low Q values. We also intend to investigate block boundary
-smoothing, "poor man's variable quantization", and other means of improving
-quality-vs-file-size performance without sacrificing compatibility.
-
-In future versions, we are considering supporting some of the upcoming JPEG
-Part 3 extensions --- principally, variable quantization and the SPIFF file
-format.
-
-As always, speeding things up is of great interest.
-
-Please send bug reports, offers of help, etc. to jpeg-info@uunet.uu.net.
diff --git a/libjpegtwrp/README-VeNum b/libjpegtwrp/README-VeNum
deleted file mode 100644
index ee51449c7..000000000
--- a/libjpegtwrp/README-VeNum
+++ /dev/null
@@ -1,20 +0,0 @@
-README-VeNum
-Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
-=================================================================
-
-Consumers are increasingly browsing Web based photo galleries incorporating
-high-resolution JPEG images with their mobile devices. These images are
-decoded by the mobile device, and typically also scaled down to fit the user's
-zoom selection on the device's browser.
-
-In order to improve both decode and download times, Qualcomm Innovation Center
-has optimized the JPEG library found on many common OS platforms such as Web
-OS, Android, and Chrome OS. Our team re-implemented several routines to utilize the
-DSP-like SIMD capabilities of the ARM NEON instruction set. These were then
-tuned and tested on Qualcomm's Snapdragon platform which implements the VeNum
-implementation of these same instructions.
-
-The specific areas of focus cover VeNum/NEON acceleration of Inverse Discrete
-Cosine Transform (iDCT) for 8x8, 4x4, 2x2, and 1x1 block sizes and YUV to RGB
-color space conversion. This resulted in a range of 18-32% improvement in JPEG
-decode and downscale times for images greater than 2Mpixels.
diff --git a/libjpegtwrp/ThirdPartyProject.prop b/libjpegtwrp/ThirdPartyProject.prop
deleted file mode 100644
index e88cc6355..000000000
--- a/libjpegtwrp/ThirdPartyProject.prop
+++ /dev/null
@@ -1,9 +0,0 @@
-# Copyright 2010 Google Inc. All Rights Reserved.
-#Fri Jul 16 10:03:09 PDT 2010
-currentVersion=8a
-version=6b
-isNative=true
-name=jpeg
-keywords=jpeg
-onDevice=true
-homepage=http\://www.ijg.org/
diff --git a/libjpegtwrp/ansi2knr.1 b/libjpegtwrp/ansi2knr.1
deleted file mode 100644
index f9ee5a631..000000000
--- a/libjpegtwrp/ansi2knr.1
+++ /dev/null
@@ -1,36 +0,0 @@
-.TH ANSI2KNR 1 "19 Jan 1996"
-.SH NAME
-ansi2knr \- convert ANSI C to Kernighan & Ritchie C
-.SH SYNOPSIS
-.I ansi2knr
-[--varargs] input_file [output_file]
-.SH DESCRIPTION
-If no output_file is supplied, output goes to stdout.
-.br
-There are no error messages.
-.sp
-.I ansi2knr
-recognizes function definitions by seeing a non-keyword identifier at the left
-margin, followed by a left parenthesis, with a right parenthesis as the last
-character on the line, and with a left brace as the first token on the
-following line (ignoring possible intervening comments). It will recognize a
-multi-line header provided that no intervening line ends with a left or right
-brace or a semicolon. These algorithms ignore whitespace and comments, except
-that the function name must be the first thing on the line.
-.sp
-The following constructs will confuse it:
-.br
- - Any other construct that starts at the left margin and follows the
-above syntax (such as a macro or function call).
-.br
- - Some macros that tinker with the syntax of the function header.
-.sp
-The --varargs switch is obsolete, and is recognized only for
-backwards compatibility. The present version of
-.I ansi2knr
-will always attempt to convert a ... argument to va_alist and va_dcl.
-.SH AUTHOR
-L. Peter Deutsch <ghost@aladdin.com> wrote the original ansi2knr and
-continues to maintain the current version; most of the code in the current
-version is his work. ansi2knr also includes contributions by Francois
-Pinard <pinard@iro.umontreal.ca> and Jim Avera <jima@netcom.com>.
diff --git a/libjpegtwrp/ansi2knr.c b/libjpegtwrp/ansi2knr.c
deleted file mode 100644
index 4e05fc2d3..000000000
--- a/libjpegtwrp/ansi2knr.c
+++ /dev/null
@@ -1,693 +0,0 @@
-/* ansi2knr.c */
-/* Convert ANSI C function definitions to K&R ("traditional C") syntax */
-
-/*
-ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY. No author or distributor accepts responsibility to anyone for the
-consequences of using it or for whether it serves any particular purpose or
-works at all, unless he says so in writing. Refer to the GNU General Public
-License (the "GPL") for full details.
-
-Everyone is granted permission to copy, modify and redistribute ansi2knr,
-but only under the conditions described in the GPL. A copy of this license
-is supposed to have been given to you along with ansi2knr so you can know
-your rights and responsibilities. It should be in a file named COPYLEFT.
-[In the IJG distribution, the GPL appears below, not in a separate file.]
-Among other things, the copyright notice and this notice must be preserved
-on all copies.
-
-We explicitly state here what we believe is already implied by the GPL: if
-the ansi2knr program is distributed as a separate set of sources and a
-separate executable file which are aggregated on a storage medium together
-with another program, this in itself does not bring the other program under
-the GPL, nor does the mere fact that such a program or the procedures for
-constructing it invoke the ansi2knr executable bring any other part of the
-program under the GPL.
-*/
-
-/*
----------- Here is the GNU GPL file COPYLEFT, referred to above ----------
------ These terms do NOT apply to the JPEG software itself; see README ------
-
- GHOSTSCRIPT GENERAL PUBLIC LICENSE
- (Clarified 11 Feb 1988)
-
- Copyright (C) 1988 Richard M. Stallman
- Everyone is permitted to copy and distribute verbatim copies of this
- license, but changing it is not allowed. You can also use this wording
- to make the terms for other programs.
-
- The license agreements of most software companies keep you at the
-mercy of those companies. By contrast, our general public license is
-intended to give everyone the right to share Ghostscript. To make sure
-that you get the rights we want you to have, we need to make
-restrictions that forbid anyone to deny you these rights or to ask you
-to surrender the rights. Hence this license agreement.
-
- Specifically, we want to make sure that you have the right to give
-away copies of Ghostscript, that you receive source code or else can get
-it if you want it, that you can change Ghostscript or use pieces of it
-in new free programs, and that you know you can do these things.
-
- To make sure that everyone has such rights, we have to forbid you to
-deprive anyone else of these rights. For example, if you distribute
-copies of Ghostscript, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must tell them their rights.
-
- Also, for our own protection, we must make certain that everyone finds
-out that there is no warranty for Ghostscript. If Ghostscript is
-modified by someone else and passed on, we want its recipients to know
-that what they have is not what we distributed, so that any problems
-introduced by others will not reflect on our reputation.
-
- Therefore we (Richard M. Stallman and the Free Software Foundation,
-Inc.) make the following terms which say what you must do to be allowed
-to distribute or change Ghostscript.
-
-
- COPYING POLICIES
-
- 1. You may copy and distribute verbatim copies of Ghostscript source
-code as you receive it, in any medium, provided that you conspicuously
-and appropriately publish on each copy a valid copyright and license
-notice "Copyright (C) 1989 Aladdin Enterprises. All rights reserved.
-Distributed by Free Software Foundation, Inc." (or with whatever year is
-appropriate); keep intact the notices on all files that refer to this
-License Agreement and to the absence of any warranty; and give any other
-recipients of the Ghostscript program a copy of this License Agreement
-along with the program. You may charge a distribution fee for the
-physical act of transferring a copy.
-
- 2. You may modify your copy or copies of Ghostscript or any portion of
-it, and copy and distribute such modifications under the terms of
-Paragraph 1 above, provided that you also do the following:
-
- a) cause the modified files to carry prominent notices stating
- that you changed the files and the date of any change; and
-
- b) cause the whole of any work that you distribute or publish,
- that in whole or in part contains or is a derivative of Ghostscript
- or any part thereof, to be licensed at no charge to all third
- parties on terms identical to those contained in this License
- Agreement (except that you may choose to grant more extensive
- warranty protection to some or all third parties, at your option).
-
- c) You may charge a distribution fee for the physical act of
- transferring a copy, and you may at your option offer warranty
- protection in exchange for a fee.
-
-Mere aggregation of another unrelated program with this program (or its
-derivative) on a volume of a storage or distribution medium does not bring
-the other program under the scope of these terms.
-
- 3. You may copy and distribute Ghostscript (or a portion or derivative
-of it, under Paragraph 2) in object code or executable form under the
-terms of Paragraphs 1 and 2 above provided that you also do one of the
-following:
-
- a) accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of
- Paragraphs 1 and 2 above; or,
-
- b) accompany it with a written offer, valid for at least three
- years, to give any third party free (except for a nominal
- shipping charge) a complete machine-readable copy of the
- corresponding source code, to be distributed under the terms of
- Paragraphs 1 and 2 above; or,
-
- c) accompany it with the information you received as to where the
- corresponding source code may be obtained. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form alone.)
-
-For an executable file, complete source code means all the source code for
-all modules it contains; but, as a special exception, it need not include
-source code for modules which are standard libraries that accompany the
-operating system on which the executable file runs.
-
- 4. You may not copy, sublicense, distribute or transfer Ghostscript
-except as expressly provided under this License Agreement. Any attempt
-otherwise to copy, sublicense, distribute or transfer Ghostscript is
-void and your rights to use the program under this License agreement
-shall be automatically terminated. However, parties who have received
-computer software programs from you with this License Agreement will not
-have their licenses terminated so long as such parties remain in full
-compliance.
-
- 5. If you wish to incorporate parts of Ghostscript into other free
-programs whose distribution conditions are different, write to the Free
-Software Foundation at 675 Mass Ave, Cambridge, MA 02139. We have not
-yet worked out a simple rule that can be stated here, but we will often
-permit this. We will be guided by the two goals of preserving the free
-status of all derivatives of our free software and of promoting the
-sharing and reuse of software.
-
-Your comments and suggestions about our licensing policies and our
-software are welcome! Please contact the Free Software Foundation,
-Inc., 675 Mass Ave, Cambridge, MA 02139, or call (617) 876-3296.
-
- NO WARRANTY
-
- BECAUSE GHOSTSCRIPT IS LICENSED FREE OF CHARGE, WE PROVIDE ABSOLUTELY
-NO WARRANTY, TO THE EXTENT PERMITTED BY APPLICABLE STATE LAW. EXCEPT
-WHEN OTHERWISE STATED IN WRITING, FREE SOFTWARE FOUNDATION, INC, RICHARD
-M. STALLMAN, ALADDIN ENTERPRISES, L. PETER DEUTSCH, AND/OR OTHER PARTIES
-PROVIDE GHOSTSCRIPT "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
-EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
-ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF GHOSTSCRIPT IS WITH
-YOU. SHOULD GHOSTSCRIPT PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
-NECESSARY SERVICING, REPAIR OR CORRECTION.
-
- IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW WILL RICHARD M.
-STALLMAN, THE FREE SOFTWARE FOUNDATION, INC., L. PETER DEUTSCH, ALADDIN
-ENTERPRISES, AND/OR ANY OTHER PARTY WHO MAY MODIFY AND REDISTRIBUTE
-GHOSTSCRIPT AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING
-ANY LOST PROFITS, LOST MONIES, OR OTHER SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE
-(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
-INACCURATE OR LOSSES SUSTAINED BY THIRD PARTIES OR A FAILURE OF THE
-PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS) GHOSTSCRIPT, EVEN IF YOU
-HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM
-BY ANY OTHER PARTY.
-
--------------------- End of file COPYLEFT ------------------------------
-*/
-
-/*
- * Usage:
- ansi2knr input_file [output_file]
- * If no output_file is supplied, output goes to stdout.
- * There are no error messages.
- *
- * ansi2knr recognizes function definitions by seeing a non-keyword
- * identifier at the left margin, followed by a left parenthesis,
- * with a right parenthesis as the last character on the line,
- * and with a left brace as the first token on the following line
- * (ignoring possible intervening comments).
- * It will recognize a multi-line header provided that no intervening
- * line ends with a left or right brace or a semicolon.
- * These algorithms ignore whitespace and comments, except that
- * the function name must be the first thing on the line.
- * The following constructs will confuse it:
- * - Any other construct that starts at the left margin and
- * follows the above syntax (such as a macro or function call).
- * - Some macros that tinker with the syntax of the function header.
- */
-
-/*
- * The original and principal author of ansi2knr is L. Peter Deutsch
- * <ghost@aladdin.com>. Other authors are noted in the change history
- * that follows (in reverse chronological order):
- lpd 96-01-21 added code to cope with not HAVE_CONFIG_H and with
- compilers that don't understand void, as suggested by
- Tom Lane
- lpd 96-01-15 changed to require that the first non-comment token
- on the line following a function header be a left brace,
- to reduce sensitivity to macros, as suggested by Tom Lane
- <tgl@sss.pgh.pa.us>
- lpd 95-06-22 removed #ifndefs whose sole purpose was to define
- undefined preprocessor symbols as 0; changed all #ifdefs
- for configuration symbols to #ifs
- lpd 95-04-05 changed copyright notice to make it clear that
- including ansi2knr in a program does not bring the entire
- program under the GPL
- lpd 94-12-18 added conditionals for systems where ctype macros
- don't handle 8-bit characters properly, suggested by
- Francois Pinard <pinard@iro.umontreal.ca>;
- removed --varargs switch (this is now the default)
- lpd 94-10-10 removed CONFIG_BROKETS conditional
- lpd 94-07-16 added some conditionals to help GNU `configure',
- suggested by Francois Pinard <pinard@iro.umontreal.ca>;
- properly erase prototype args in function parameters,
- contributed by Jim Avera <jima@netcom.com>;
- correct error in writeblanks (it shouldn't erase EOLs)
- lpd 89-xx-xx original version
- */
-
-/* Most of the conditionals here are to make ansi2knr work with */
-/* or without the GNU configure machinery. */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdio.h>
-#include <ctype.h>
-
-#if HAVE_CONFIG_H
-
-/*
- For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h).
- This will define HAVE_CONFIG_H and so, activate the following lines.
- */
-
-# if STDC_HEADERS || HAVE_STRING_H
-# include <string.h>
-# else
-# include <strings.h>
-# endif
-
-#else /* not HAVE_CONFIG_H */
-
-/* Otherwise do it the hard way */
-
-# ifdef BSD
-# include <strings.h>
-# else
-# ifdef VMS
- extern int strlen(), strncmp();
-# else
-# include <string.h>
-# endif
-# endif
-
-#endif /* not HAVE_CONFIG_H */
-
-#if STDC_HEADERS
-# include <stdlib.h>
-#else
-/*
- malloc and free should be declared in stdlib.h,
- but if you've got a K&R compiler, they probably aren't.
- */
-# ifdef MSDOS
-# include <malloc.h>
-# else
-# ifdef VMS
- extern char *malloc();
- extern void free();
-# else
- extern char *malloc();
- extern int free();
-# endif
-# endif
-
-#endif
-
-/*
- * The ctype macros don't always handle 8-bit characters correctly.
- * Compensate for this here.
- */
-#ifdef isascii
-# undef HAVE_ISASCII /* just in case */
-# define HAVE_ISASCII 1
-#else
-#endif
-#if STDC_HEADERS || !HAVE_ISASCII
-# define is_ascii(c) 1
-#else
-# define is_ascii(c) isascii(c)
-#endif
-
-#define is_space(c) (is_ascii(c) && isspace(c))
-#define is_alpha(c) (is_ascii(c) && isalpha(c))
-#define is_alnum(c) (is_ascii(c) && isalnum(c))
-
-/* Scanning macros */
-#define isidchar(ch) (is_alnum(ch) || (ch) == '_')
-#define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_')
-
-/* Forward references */
-char *skipspace();
-int writeblanks();
-int test1();
-int convert1();
-
-/* The main program */
-int
-main(argc, argv)
- int argc;
- char *argv[];
-{ FILE *in, *out;
-#define bufsize 5000 /* arbitrary size */
- char *buf;
- char *line;
- char *more;
- /*
- * In previous versions, ansi2knr recognized a --varargs switch.
- * If this switch was supplied, ansi2knr would attempt to convert
- * a ... argument to va_alist and va_dcl; if this switch was not
- * supplied, ansi2knr would simply drop any such arguments.
- * Now, ansi2knr always does this conversion, and we only
- * check for this switch for backward compatibility.
- */
- int convert_varargs = 1;
-
- if ( argc > 1 && argv[1][0] == '-' )
- { if ( !strcmp(argv[1], "--varargs") )
- { convert_varargs = 1;
- argc--;
- argv++;
- }
- else
- { fprintf(stderr, "Unrecognized switch: %s\n", argv[1]);
- exit(1);
- }
- }
- switch ( argc )
- {
- default:
- printf("Usage: ansi2knr input_file [output_file]\n");
- exit(0);
- case 2:
- out = stdout;
- break;
- case 3:
- out = fopen(argv[2], "w");
- if ( out == NULL )
- { fprintf(stderr, "Cannot open output file %s\n", argv[2]);
- exit(1);
- }
- }
- in = fopen(argv[1], "r");
- if ( in == NULL )
- { fprintf(stderr, "Cannot open input file %s\n", argv[1]);
- exit(1);
- }
- fprintf(out, "#line 1 \"%s\"\n", argv[1]);
- buf = malloc(bufsize);
- line = buf;
- while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL )
- {
-test: line += strlen(line);
- switch ( test1(buf) )
- {
- case 2: /* a function header */
- convert1(buf, out, 1, convert_varargs);
- break;
- case 1: /* a function */
- /* Check for a { at the start of the next line. */
- more = ++line;
-f: if ( line >= buf + (bufsize - 1) ) /* overflow check */
- goto wl;
- if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL )
- goto wl;
- switch ( *skipspace(more, 1) )
- {
- case '{':
- /* Definitely a function header. */
- convert1(buf, out, 0, convert_varargs);
- fputs(more, out);
- break;
- case 0:
- /* The next line was blank or a comment: */
- /* keep scanning for a non-comment. */
- line += strlen(line);
- goto f;
- default:
- /* buf isn't a function header, but */
- /* more might be. */
- fputs(buf, out);
- strcpy(buf, more);
- line = buf;
- goto test;
- }
- break;
- case -1: /* maybe the start of a function */
- if ( line != buf + (bufsize - 1) ) /* overflow check */
- continue;
- /* falls through */
- default: /* not a function */
-wl: fputs(buf, out);
- break;
- }
- line = buf;
- }
- if ( line != buf )
- fputs(buf, out);
- free(buf);
- fclose(out);
- fclose(in);
- return 0;
-}
-
-/* Skip over space and comments, in either direction. */
-char *
-skipspace(p, dir)
- register char *p;
- register int dir; /* 1 for forward, -1 for backward */
-{ for ( ; ; )
- { while ( is_space(*p) )
- p += dir;
- if ( !(*p == '/' && p[dir] == '*') )
- break;
- p += dir; p += dir;
- while ( !(*p == '*' && p[dir] == '/') )
- { if ( *p == 0 )
- return p; /* multi-line comment?? */
- p += dir;
- }
- p += dir; p += dir;
- }
- return p;
-}
-
-/*
- * Write blanks over part of a string.
- * Don't overwrite end-of-line characters.
- */
-int
-writeblanks(start, end)
- char *start;
- char *end;
-{ char *p;
- for ( p = start; p < end; p++ )
- if ( *p != '\r' && *p != '\n' )
- *p = ' ';
- return 0;
-}
-
-/*
- * Test whether the string in buf is a function definition.
- * The string may contain and/or end with a newline.
- * Return as follows:
- * 0 - definitely not a function definition;
- * 1 - definitely a function definition;
- * 2 - definitely a function prototype (NOT USED);
- * -1 - may be the beginning of a function definition,
- * append another line and look again.
- * The reason we don't attempt to convert function prototypes is that
- * Ghostscript's declaration-generating macros look too much like
- * prototypes, and confuse the algorithms.
- */
-int
-test1(buf)
- char *buf;
-{ register char *p = buf;
- char *bend;
- char *endfn;
- int contin;
-
- if ( !isidfirstchar(*p) )
- return 0; /* no name at left margin */
- bend = skipspace(buf + strlen(buf) - 1, -1);
- switch ( *bend )
- {
- case ';': contin = 0 /*2*/; break;
- case ')': contin = 1; break;
- case '{': return 0; /* not a function */
- case '}': return 0; /* not a function */
- default: contin = -1;
- }
- while ( isidchar(*p) )
- p++;
- endfn = p;
- p = skipspace(p, 1);
- if ( *p++ != '(' )
- return 0; /* not a function */
- p = skipspace(p, 1);
- if ( *p == ')' )
- return 0; /* no parameters */
- /* Check that the apparent function name isn't a keyword. */
- /* We only need to check for keywords that could be followed */
- /* by a left parenthesis (which, unfortunately, is most of them). */
- { static char *words[] =
- { "asm", "auto", "case", "char", "const", "double",
- "extern", "float", "for", "if", "int", "long",
- "register", "return", "short", "signed", "sizeof",
- "static", "switch", "typedef", "unsigned",
- "void", "volatile", "while", 0
- };
- char **key = words;
- char *kp;
- int len = endfn - buf;
-
- while ( (kp = *key) != 0 )
- { if ( strlen(kp) == len && !strncmp(kp, buf, len) )
- return 0; /* name is a keyword */
- key++;
- }
- }
- return contin;
-}
-
-/* Convert a recognized function definition or header to K&R syntax. */
-int
-convert1(buf, out, header, convert_varargs)
- char *buf;
- FILE *out;
- int header; /* Boolean */
- int convert_varargs; /* Boolean */
-{ char *endfn;
- register char *p;
- char **breaks;
- unsigned num_breaks = 2; /* for testing */
- char **btop;
- char **bp;
- char **ap;
- char *vararg = 0;
-
- /* Pre-ANSI implementations don't agree on whether strchr */
- /* is called strchr or index, so we open-code it here. */
- for ( endfn = buf; *(endfn++) != '('; )
- ;
-top: p = endfn;
- breaks = (char **)malloc(sizeof(char *) * num_breaks * 2);
- if ( breaks == 0 )
- { /* Couldn't allocate break table, give up */
- fprintf(stderr, "Unable to allocate break table!\n");
- fputs(buf, out);
- return -1;
- }
- btop = breaks + num_breaks * 2 - 2;
- bp = breaks;
- /* Parse the argument list */
- do
- { int level = 0;
- char *lp = NULL;
- char *rp;
- char *end = NULL;
-
- if ( bp >= btop )
- { /* Filled up break table. */
- /* Allocate a bigger one and start over. */
- free((char *)breaks);
- num_breaks <<= 1;
- goto top;
- }
- *bp++ = p;
- /* Find the end of the argument */
- for ( ; end == NULL; p++ )
- { switch(*p)
- {
- case ',':
- if ( !level ) end = p;
- break;
- case '(':
- if ( !level ) lp = p;
- level++;
- break;
- case ')':
- if ( --level < 0 ) end = p;
- else rp = p;
- break;
- case '/':
- p = skipspace(p, 1) - 1;
- break;
- default:
- ;
- }
- }
- /* Erase any embedded prototype parameters. */
- if ( lp )
- writeblanks(lp + 1, rp);
- p--; /* back up over terminator */
- /* Find the name being declared. */
- /* This is complicated because of procedure and */
- /* array modifiers. */
- for ( ; ; )
- { p = skipspace(p - 1, -1);
- switch ( *p )
- {
- case ']': /* skip array dimension(s) */
- case ')': /* skip procedure args OR name */
- { int level = 1;
- while ( level )
- switch ( *--p )
- {
- case ']': case ')': level++; break;
- case '[': case '(': level--; break;
- case '/': p = skipspace(p, -1) + 1; break;
- default: ;
- }
- }
- if ( *p == '(' && *skipspace(p + 1, 1) == '*' )
- { /* We found the name being declared */
- while ( !isidfirstchar(*p) )
- p = skipspace(p, 1) + 1;
- goto found;
- }
- break;
- default:
- goto found;
- }
- }
-found: if ( *p == '.' && p[-1] == '.' && p[-2] == '.' )
- { if ( convert_varargs )
- { *bp++ = "va_alist";
- vararg = p-2;
- }
- else
- { p++;
- if ( bp == breaks + 1 ) /* sole argument */
- writeblanks(breaks[0], p);
- else
- writeblanks(bp[-1] - 1, p);
- bp--;
- }
- }
- else
- { while ( isidchar(*p) ) p--;
- *bp++ = p+1;
- }
- p = end;
- }
- while ( *p++ == ',' );
- *bp = p;
- /* Make a special check for 'void' arglist */
- if ( bp == breaks+2 )
- { p = skipspace(breaks[0], 1);
- if ( !strncmp(p, "void", 4) )
- { p = skipspace(p+4, 1);
- if ( p == breaks[2] - 1 )
- { bp = breaks; /* yup, pretend arglist is empty */
- writeblanks(breaks[0], p + 1);
- }
- }
- }
- /* Put out the function name and left parenthesis. */
- p = buf;
- while ( p != endfn ) putc(*p, out), p++;
- /* Put out the declaration. */
- if ( header )
- { fputs(");", out);
- for ( p = breaks[0]; *p; p++ )
- if ( *p == '\r' || *p == '\n' )
- putc(*p, out);
- }
- else
- { for ( ap = breaks+1; ap < bp; ap += 2 )
- { p = *ap;
- while ( isidchar(*p) )
- putc(*p, out), p++;
- if ( ap < bp - 1 )
- fputs(", ", out);
- }
- fputs(") ", out);
- /* Put out the argument declarations */
- for ( ap = breaks+2; ap <= bp; ap += 2 )
- (*ap)[-1] = ';';
- if ( vararg != 0 )
- { *vararg = 0;
- fputs(breaks[0], out); /* any prior args */
- fputs("va_dcl", out); /* the final arg */
- fputs(bp[0], out);
- }
- else
- fputs(breaks[0], out);
- }
- free((char *)breaks);
- return 0;
-}
diff --git a/libjpegtwrp/armv6_idct.S b/libjpegtwrp/armv6_idct.S
deleted file mode 100644
index 18e4e8a18..000000000
--- a/libjpegtwrp/armv6_idct.S
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Copyright (C) 2010 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/*
- * This is a fast-and-accurate implementation of inverse Discrete Cosine
- * Transform (IDCT) for ARMv6+. It also performs dequantization of the input
- * coefficients just like other methods.
- *
- * This implementation is based on the scaled 1-D DCT algorithm proposed by
- * Arai, Agui, and Nakajima. The following code is based on the figure 4-8
- * on page 52 of the JPEG textbook by Pennebaker and Mitchell. Coefficients
- * are (almost) directly mapped into registers.
- *
- * The accuracy is achieved by using SMULWy and SMLAWy instructions. Both
- * multiply 32 bits by 16 bits and store the top 32 bits of the result. It
- * makes 32-bit fixed-point arithmetic possible without overflow. That is
- * why jpeg_idct_ifast(), which is written in C, cannot be improved.
- *
- * More tricks are used to gain more speed. First of all, we use as many
- * registers as possible. ARM processor has 16 registers including sp (r13)
- * and pc (r15), so only 14 registers can be used without limitations. In
- * general, we let r0 to r7 hold the coefficients; r10 and r11 hold four
- * 16-bit constants; r12 and r14 hold two of the four arguments; and r8 hold
- * intermediate value. In the second pass, r9 is the loop counter. In the
- * first pass, r8 to r11 are used to hold quantization values, so the loop
- * counter is held by sp. Yes, the stack pointer. Since it must be aligned
- * to 4-byte boundary all the time, we align it to 32-byte boundary and use
- * bit 3 to bit 5. As the result, we actually use 14.1 registers. :-)
- *
- * Second, we rearrange quantization values to access them sequentially. The
- * table is first transposed, and the new columns are placed in the order of
- * 7, 5, 1, 3, 0, 2, 4, 6. Thus we can use LDMDB to load four values at a
- * time. Rearranging coefficients also helps, but that requires to change a
- * dozen of files, which seems not worth it. In addition, we choose to scale
- * up quantization values by 13 bits, so the coefficients are scaled up by
- * 16 bits after both passes. Then we can pack and saturate them two at a
- * time using PKHTB and USAT16 instructions.
- *
- * Third, we reorder the instructions to avoid bubbles in the pipeline. This
- * is done by hand accroding to the cycle timings and the interlock behavior
- * described in the technical reference manual of ARM1136JF-S. We also take
- * advantage of dual issue processors by interleaving instructions with
- * dependencies. It has been benchmarked on four devices and all the results
- * showed distinguishable improvements. Note that PLD instructions actually
- * slow things down, so they are removed at the last minute. In the future,
- * this might be futher improved using a system profiler.
- */
-
-#ifdef __arm__
-#include <machine/cpu-features.h>
-#endif
-
-#if __ARM_ARCH__ >= 6
-
-// void armv6_idct(short *coefs, int *quans, unsigned char *rows, int col)
- .arm
- .text
- .align
- .global armv6_idct
- .func armv6_idct
-
-armv6_idct:
- // Push everything except sp (r13) and pc (r15).
- stmdb sp!, {r4, r5, r6, r7, r8, r9, r10, r11, r12, r14}
-
- // r12 = quans, r14 = coefs.
- sub r4, sp, #236
- bic sp, r4, #31
- add r5, sp, #224
- add r12, r1, #256
- stm r5, {r2, r3, r4}
- add r14, r0, #16
-
-pass1_head:
- // Load quantization values. (q[0, 2, 4, 6])
- ldmdb r12!, {r8, r9, r10, r11}
-
- // Load coefficients. (c[4, 1, 2, 3, 0, 5, 6, 7])
- ldrsh r4, [r14, #-2] !
- ldrsh r1, [r14, #16]
- ldrsh r2, [r14, #32]
- ldrsh r3, [r14, #48]
- ldrsh r0, [r14, #64]
- ldrsh r5, [r14, #80]
- ldrsh r6, [r14, #96]
- ldrsh r7, [r14, #112]
-
- // r4 = q[0] * c[0];
- mul r4, r8, r4
-
- // Check if ACs are all zero.
- cmp r0, #0
- orreqs r8, r1, r2
- orreqs r8, r3, r5
- orreqs r8, r6, r7
- beq pass1_zero
-
- // Step 1: Dequantizations.
-
- // r2 = q[2] * c[2];
- // r0 = q[4] * c[4] + r4;
- // r6 = q[6] * c[6] + r2;
- mul r2, r9, r2
- mla r0, r10, r0, r4
- mla r6, r11, r6, r2
-
- // Load quantization values. (q[7, 5, 1, 3])
- ldmdb r12!, {r8, r9, r10, r11}
-
- // r4 = r4 * 2 - r0 = -(r0 - r4 * 2);
- // r2 = r2 * 2 - r6 = -(r6 - r2 * 2);
- rsb r4, r0, r4, lsl #1
- rsb r2, r6, r2, lsl #1
-
- // r7 = q[7] * c[7];
- // r5 = q[5] * c[5];
- // r1 = q[1] * c[1] + r7;
- // r3 = q[3] * c[3] + r5;
- mul r7, r8, r7
- mul r5, r9, r5
- mla r1, r10, r1, r7
- mla r3, r11, r3, r5
-
- // Load constants.
- ldrd r10, constants
-
- // Step 2: Rotations and Butterflies.
-
- // r7 = r1 - r7 * 2;
- // r1 = r1 - r3;
- // r5 = r5 * 2 - r3 = -(r3 - r5 * 2);
- // r3 = r1 + r3 * 2;
- // r8 = r5 + r7;
- sub r7, r1, r7, lsl #1
- sub r1, r1, r3
- rsb r5, r3, r5, lsl #1
- add r3, r1, r3, lsl #1
- add r8, r5, r7
-
- // r2 = r2 * 1.41421 = r2 * 27146 / 65536 + r2;
- // r8 = r8 * 1.84776 / 8 = r8 * 15137 / 65536;
- // r1 = r1 * 1.41421 = r1 * 27146 / 65536 + r1;
- smlawt r2, r2, r10, r2
- smulwb r8, r8, r10
- smlawt r1, r1, r10, r1
-
- // r0 = r0 + r6;
- // r2 = r2 - r6;
- // r6 = r0 - r6 * 2;
- add r0, r0, r6
- sub r2, r2, r6
- sub r6, r0, r6, lsl #1
-
- // r5 = r5 * -2.61313 / 8 + r8 = r5 * -21407 / 65536 + r8;
- // r8 = r7 * -1.08239 / 8 + r8 = r7 * -8867 / 65536 + r8;
- smlawt r5, r5, r11, r8
- smlawb r8, r7, r11, r8
-
- // r4 = r4 + r2;
- // r0 = r0 + r3;
- // r2 = r4 - r2 * 2;
- add r4, r4, r2
- add r0, r0, r3
- sub r2, r4, r2, lsl #1
-
- // r7 = r5 * 8 - r3 = -(r3 - r5 * 8);
- // r3 = r0 - r3 * 2;
- // r1 = r1 - r7;
- // r4 = r4 + r7;
- // r5 = r8 * 8 - r1 = -(r1 - r8 * 8);
- // r7 = r4 - r7 * 2;
- rsb r7, r3, r5, lsl #3
- sub r3, r0, r3, lsl #1
- sub r1, r1, r7
- add r4, r4, r7
- rsb r5, r1, r8, lsl #3
- sub r7, r4, r7, lsl #1
-
- // r2 = r2 + r1;
- // r6 = r6 + r5;
- // r1 = r2 - r1 * 2;
- // r5 = r6 - r5 * 2;
- add r2, r2, r1
- add r6, r6, r5
- sub r1, r2, r1, lsl #1
- sub r5, r6, r5, lsl #1
-
- // Step 3: Reorder and Save.
-
- str r0, [sp, #-4] !
- str r4, [sp, #32]
- str r2, [sp, #64]
- str r6, [sp, #96]
- str r5, [sp, #128]
- str r1, [sp, #160]
- str r7, [sp, #192]
- str r3, [sp, #224]
- b pass1_tail
-
- // Precomputed 16-bit constants: 27146, 15137, -21407, -8867.
- // Put them in the middle since LDRD only accepts offsets from -255 to 255.
- .align 3
-constants:
- .word 0x6a0a3b21
- .word 0xac61dd5d
-
-pass1_zero:
- str r4, [sp, #-4] !
- str r4, [sp, #32]
- str r4, [sp, #64]
- str r4, [sp, #96]
- str r4, [sp, #128]
- str r4, [sp, #160]
- str r4, [sp, #192]
- str r4, [sp, #224]
- sub r12, r12, #16
-
-pass1_tail:
- ands r9, sp, #31
- bne pass1_head
-
- // r12 = rows, r14 = col.
- ldr r12, [sp, #256]
- ldr r14, [sp, #260]
-
- // Load constants.
- ldrd r10, constants
-
-pass2_head:
- // Load coefficients. (c[0, 1, 2, 3, 4, 5, 6, 7])
- ldmia sp!, {r0, r1, r2, r3, r4, r5, r6, r7}
-
- // r0 = r0 + 0x00808000;
- add r0, r0, #0x00800000
- add r0, r0, #0x00008000
-
- // Step 1: Analog to the first pass.
-
- // r0 = r0 + r4;
- // r6 = r6 + r2;
- add r0, r0, r4
- add r6, r6, r2
-
- // r4 = r0 - r4 * 2;
- // r2 = r2 * 2 - r6 = -(r6 - r2 * 2);
- sub r4, r0, r4, lsl #1
- rsb r2, r6, r2, lsl #1
-
- // r1 = r1 + r7;
- // r3 = r3 + r5;
- add r1, r1, r7
- add r3, r3, r5
-
- // Step 2: Rotations and Butterflies.
-
- // r7 = r1 - r7 * 2;
- // r1 = r1 - r3;
- // r5 = r5 * 2 - r3 = -(r3 - r5 * 2);
- // r3 = r1 + r3 * 2;
- // r8 = r5 + r7;
- sub r7, r1, r7, lsl #1
- sub r1, r1, r3
- rsb r5, r3, r5, lsl #1
- add r3, r1, r3, lsl #1
- add r8, r5, r7
-
- // r2 = r2 * 1.41421 = r2 * 27146 / 65536 + r2;
- // r8 = r8 * 1.84776 / 8 = r8 * 15137 / 65536;
- // r1 = r1 * 1.41421 = r1 * 27146 / 65536 + r1;
- smlawt r2, r2, r10, r2
- smulwb r8, r8, r10
- smlawt r1, r1, r10, r1
-
- // r0 = r0 + r6;
- // r2 = r2 - r6;
- // r6 = r0 - r6 * 2;
- add r0, r0, r6
- sub r2, r2, r6
- sub r6, r0, r6, lsl #1
-
- // r5 = r5 * -2.61313 / 8 + r8 = r5 * -21407 / 65536 + r8;
- // r8 = r7 * -1.08239 / 8 + r8 = r7 * -8867 / 65536 + r8;
- smlawt r5, r5, r11, r8
- smlawb r8, r7, r11, r8
-
- // r4 = r4 + r2;
- // r0 = r0 + r3;
- // r2 = r4 - r2 * 2;
- add r4, r4, r2
- add r0, r0, r3
- sub r2, r4, r2, lsl #1
-
- // r7 = r5 * 8 - r3 = -(r3 - r5 * 8);
- // r3 = r0 - r3 * 2;
- // r1 = r1 - r7;
- // r4 = r4 + r7;
- // r5 = r8 * 8 - r1 = -(r1 - r8 * 8);
- // r7 = r4 - r7 * 2;
- rsb r7, r3, r5, lsl #3
- sub r3, r0, r3, lsl #1
- sub r1, r1, r7
- add r4, r4, r7
- rsb r5, r1, r8, lsl #3
- sub r7, r4, r7, lsl #1
-
- // r2 = r2 + r1;
- // r6 = r6 + r5;
- // r1 = r2 - r1 * 2;
- // r5 = r6 - r5 * 2;
- add r2, r2, r1
- add r6, r6, r5
- sub r1, r2, r1, lsl #1
- sub r5, r6, r5, lsl #1
-
- // Step 3: Reorder and Save.
-
- // Load output pointer.
- ldr r8, [r12], #4
-
- // For little endian: r6, r2, r4, r0, r3, r7, r1, r5.
- pkhtb r6, r6, r4, asr #16
- pkhtb r2, r2, r0, asr #16
- pkhtb r3, r3, r1, asr #16
- pkhtb r7, r7, r5, asr #16
- usat16 r6, #8, r6
- usat16 r2, #8, r2
- usat16 r3, #8, r3
- usat16 r7, #8, r7
- orr r0, r2, r6, lsl #8
- orr r1, r7, r3, lsl #8
-
-#ifdef __ARMEB__
- // Reverse bytes for big endian.
- rev r0, r0
- rev r1, r1
-#endif
-
- // Use STR instead of STRD to support unaligned access.
- str r0, [r8, r14] !
- str r1, [r8, #4]
-
-pass2_tail:
- adds r9, r9, #0x10000000
- bpl pass2_head
-
- ldr sp, [sp, #8]
- add sp, sp, #236
-
- ldmia sp!, {r4, r5, r6, r7, r8, r9, r10, r11, r12, r14}
- bx lr
- .endfunc
-
-#endif
diff --git a/libjpegtwrp/asm/armv7/jdcolor-android-armv7.S b/libjpegtwrp/asm/armv7/jdcolor-android-armv7.S
deleted file mode 100644
index 95bd4bf78..000000000
--- a/libjpegtwrp/asm/armv7/jdcolor-android-armv7.S
+++ /dev/null
@@ -1,1223 +0,0 @@
-/*------------------------------------------------------------------------
-* jdcolor-android-armv7.S
-*
-* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions are
-* met:
-* * Redistributions of source code must retain the above copyright
-* notice, this list of conditions and the following disclaimer.
-* * Redistributions in binary form must reproduce the above
-* copyright notice, this list of conditions and the following
-* disclaimer in the documentation and/or other materials provided
-* with the distribution.
-* * Neither the name of Code Aurora Forum, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived
-* from this software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
-* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
-* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
-* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*--------------------------------------------------------------------------
-
-*--------------------------------------------------------------------------
-* FUNCTION LIST
-*--------------------------------------------------------------------------
-*
-* - yvup2rgb565_venum
-* - yyvup2rgb565_venum
-* - yvup2abgr8888_venum
-* - yyvup2abgr8888_venum
-*
-*--------------------------------------------------------------------------
-*/
-
- .section yvu_plain_to_rgb_android, "x" @ AREA
- .text @ |.text|, CODE, READONLY
- .align 2
- .code 32 @ CODE32
-
-/*-----------------------------------------------------------------------------
- * ARM Registers
- * ---------------------------------------------------------------------------- */
-p_y .req r0
-p_cr .req r1
-p_cb .req r2
-p_rgb .req r3
-p_bgr .req r3
-length .req r12
-
- .global yvup2rgb565_venum
- .global yyvup2rgb565_venum
- .global yvup2abgr8888_venum
- .global yyvup2abgr8888_venum
-
-@ coefficients in color conversion matrix multiplication
-.equ COEFF_Y, 256 @ contribution of Y
-.equ COEFF_V_RED, 359 @ contribution of V for red
-.equ COEFF_U_GREEN, -88 @ contribution of U for green
-.equ COEFF_V_GREEN, -183 @ contribution of V for green
-.equ COEFF_U_BLUE, 454 @ contribution of U for blue
-
-@ Clamping constants 0x0 and 0xFF
-.equ COEFF_0, 0
-.equ COEFF_255, 255
-
-@ Bias coefficients for red, green and blue
-.equ COEFF_BIAS_R, -45824 @ Red bias = -359*128 + 128
-.equ COEFF_BIAS_G, 34816 @ Green bias = (88+183)*128 + 128
-.equ COEFF_BIAS_B, -57984 @ Blue bias = -454*128 + 128
-
-
-/*--------------------------------------------------------------------------
-* FUNCTION : yvup2rgb565_venum
-*--------------------------------------------------------------------------
-* DESCRIPTION : Perform YVU planar to RGB565 conversion.
-*--------------------------------------------------------------------------
-* C PROTOTYPE : void yvup2rgb565_venum(uint8_t *p_y,
-* uint8_t *p_cr,
-* uint8_t *p_cb,
-* uint8_t *p_rgb565,
-* uint32_t length)
-*--------------------------------------------------------------------------
-* REG INPUT : R0: uint8_t *p_y
-* pointer to the input Y Line
-* R1: uint8_t *p_cr
-* pointer to the input Cr Line
-* R2: uint8_t *p_cb
-* pointer to the input Cb Line
-* R3: uint8_t *p_rgb565
-* pointer to the output RGB Line
-* R12: uint32_t length
-* width of Line
-*--------------------------------------------------------------------------
-* STACK ARG : None
-*--------------------------------------------------------------------------
-* REG OUTPUT : None
-*--------------------------------------------------------------------------
-* MEM INPUT : p_y - a line of Y pixels
-* p_cr - a line of Cr pixels
-* p_cb - a line of Cb pixels
-* length - the width of the input line
-*--------------------------------------------------------------------------
-* MEM OUTPUT : p_rgb565 - the converted rgb pixels
-*--------------------------------------------------------------------------
-* REG AFFECTED : ARM: R0-R4, R12
-* NEON: Q0-Q15
-*--------------------------------------------------------------------------
-* STACK USAGE : none
-*--------------------------------------------------------------------------
-* CYCLES : none
-*
-*--------------------------------------------------------------------------
-* NOTES :
-*--------------------------------------------------------------------------
-*/
-.type yvup2rgb565_venum, %function
-yvup2rgb565_venum:
- /*-------------------------------------------------------------------------
- * Store stack registers
- * ------------------------------------------------------------------------ */
- STMFD SP!, {LR}
-
- VPUSH {D8-D15}
-
- PLD [R0, R3] @ preload luma line
-
- ADR R12, constants
-
- VLD1.S16 {D6, D7}, [R12]! @ D6, D7: 359 | -88 | -183 | 454 | 256 | 0 | 255 | 0
- VLD1.S32 {D30, D31}, [R12] @ Q15 : -45824 | 34816 | -57984 | X
-
- /*-------------------------------------------------------------------------
- * Load the 5th parameter via stack
- * R0 ~ R3 are used to pass the first 4 parameters, the 5th and above
- * parameters are passed via stack
- * ------------------------------------------------------------------------ */
- LDR R12, [SP, #68] @ LR is pushed into the stack so SP is
- @ decreased by 4,
- @ D8-D15 are also pushed into the stack
- @ so SP is decreased by
- @ 8-byte/D-Register * 8 D-Registers = 64,
- @ so SP needs to be increased by 64+4=68
- @ to get the value that was first pushed
- @ into stack (the 5th parameter passed in
- @ throught stack)
-
- /*-------------------------------------------------------------------------
- * Load clamping parameters to duplicate vector elements
- * ------------------------------------------------------------------------ */
- VDUP.S16 Q4, D7[1] @ Q4: 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0
- VDUP.S16 Q5, D7[2] @ Q5: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255
-
- /*-------------------------------------------------------------------------
- * Read bias
- * ------------------------------------------------------------------------ */
- VDUP.S32 Q0, D30[0] @ Q0: -45824 | -45824 | -45824 | -45824
- VDUP.S32 Q1, D30[1] @ Q1: 34816 | 34816 | 34816 | 34816
- VDUP.S32 Q2, D31[0] @ Q2: -70688 | -70688 | -70688 | -70688
-
-
- /*-------------------------------------------------------------------------
- * The main loop
- * ------------------------------------------------------------------------ */
-loop_yvup2rgb565:
-
- /*-------------------------------------------------------------------------
- * Load input from Y, V and U
- * D12 : Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7
- * D14 : V0 V1 V2 V3 V4 V5 V6 V7
- * D15 : U0 U1 U2 U3 U4 U5 U6 U7
- * ------------------------------------------------------------------------ */
- VLD1.U8 {D12}, [p_y]! @ Load 8 Y elements (uint8) to D12
- VLD1.U8 {D14}, [p_cr]! @ Load 8 Cr elements (uint8) to D14
- VLD1.U8 {D15}, [p_cb]! @ Load 8 Cb elements (uint8) to D15
-
- /*-------------------------------------------------------------------------
- * Expand uint8 value to uint16
- * D18, D19: Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7
- * D20, D21: V0 V1 V2 V3 V4 V5 V6 V7
- * D22, D23: U0 U1 U2 U3 U4 U5 U6 U7
- * ------------------------------------------------------------------------ */
- VMOVL.U8 Q9, D12
- VMOVL.U8 Q10, D14
- VMOVL.U8 Q11, D15
-
- /*-------------------------------------------------------------------------
- * Multiply contribution from chrominance, results are in 32-bit
- * ------------------------------------------------------------------------ */
- VMULL.S16 Q12, D20, D6[0] @ Q12: 359*(V0,V1,V2,V3) Red
- VMULL.S16 Q13, D22, D6[1] @ Q13: -88*(U0,U1,U2,U3) Green
- VMLAL.S16 Q13, D20, D6[2] @ Q13: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3)
- VMULL.S16 Q14, D22, D6[3] @ Q14: 454*(U0,U1,U2,U3) Blue
-
- /*-------------------------------------------------------------------------
- * Add bias
- * ------------------------------------------------------------------------ */
- VADD.S32 Q12, Q0 @ Q12 add Red bias -45824
- VADD.S32 Q13, Q1 @ Q13 add Green bias 34816
- VADD.S32 Q14, Q2 @ Q14 add Blue bias -57984
-
- /*-------------------------------------------------------------------------
- * Calculate Red, Green, Blue
- * ------------------------------------------------------------------------ */
- VMLAL.S16 Q12, D18, D7[0] @ Q12: R0, R1, R2, R3 in 32-bit Q8 format
- VMLAL.S16 Q13, D18, D7[0] @ Q13: G0, G1, G2, G3 in 32-bit Q8 format
- VMLAL.S16 Q14, D18, D7[0] @ Q14: B0, B1, B2, B3 in 32-bit Q8 format
-
- /*-------------------------------------------------------------------------
- * Right shift eight bits with rounding
- * ------------------------------------------------------------------------ */
- VSHRN.S32 D18 , Q12, #8 @ D18: R0, R1, R2, R3 in 16-bit Q0 format
- VSHRN.S32 D20 , Q13, #8 @ D20: G0, G1, G2, G3 in 16-bit Q0 format
- VSHRN.S32 D22, Q14, #8 @ D22: B0, B1, B2, B3 in 16-bit Q0 format
-
- /*-------------------------------------------------------------------------
- * Done with the first 4 elements, continue on the next 4 elements
- * ------------------------------------------------------------------------ */
-
- /*-------------------------------------------------------------------------
- * Multiply contribution from chrominance, results are in 32-bit
- * ------------------------------------------------------------------------ */
- VMULL.S16 Q12, D21, D6[0] @ Q12: 359*(V0,V1,V2,V3) Red
- VMULL.S16 Q13, D23, D6[1] @ Q13: -88*(U0,U1,U2,U3) Green
- VMLAL.S16 Q13, D21, D6[2] @ Q13: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3)
- VMULL.S16 Q14, D23, D6[3] @ Q14: 454*(U0,U1,U2,U3) Blue
-
- /*-------------------------------------------------------------------------
- * Add bias
- * ------------------------------------------------------------------------ */
- VADD.S32 Q12, Q0 @ Q12 add Red bias -45824
- VADD.S32 Q13, Q1 @ Q13 add Green bias 34816
- VADD.S32 Q14, Q2 @ Q14 add Blue bias -57984
-
- /*-------------------------------------------------------------------------
- * Calculate Red, Green, Blue
- * ------------------------------------------------------------------------ */
- VMLAL.S16 Q12, D19, D7[0] @ Q12: R0, R1, R2, R3 in 32-bit Q8 format
- VMLAL.S16 Q13, D19, D7[0] @ Q13: G0, G1, G2, G3 in 32-bit Q8 format
- VMLAL.S16 Q14, D19, D7[0] @ Q14: B0, B1, B2, B3 in 32-bit Q8 format
-
- /*-------------------------------------------------------------------------
- * Right shift eight bits with rounding
- * ------------------------------------------------------------------------ */
- VSHRN.S32 D19 , Q12, #8 @ D18: R0, R1, R2, R3 in 16-bit Q0 format
- VSHRN.S32 D21 , Q13, #8 @ D20: G0, G1, G2, G3 in 16-bit Q0 format
- VSHRN.S32 D23, Q14, #8 @ D22: B0, B1, B2, B3 in 16-bit Q0 format
-
- /*-------------------------------------------------------------------------
- * Clamp the value to be within [0~255]
- * ------------------------------------------------------------------------ */
- VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0
- VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255
- VQMOVUN.S16 D28, Q9 @ store Red to D28, narrow the value from int16 to int8
-
- VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0
- VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255
- VQMOVUN.S16 D27, Q10 @ store Green to D27, narrow the value from int16 to int8
-
- VMAX.S16 Q11, Q11, Q4 @ if Q11 < 0, Q11 = 0
- VMIN.S16 Q11, Q11, Q5 @ if Q11 > 255, Q11 = 255
- VQMOVUN.S16 D26, Q11 @ store Blue to D26, narrow the value from int16 to int8.
-
- /*-------------------------------------------------------------------------
- * D27: 3 bits of Green + 5 bits of Blue
- * D28: 5 bits of Red + 3 bits of Green
- * ------------------------------------------------------------------------ */
- VSRI.8 D28, D27, #5 @ right shift G by 5 and insert to R
- VSHL.U8 D27, D27, #3 @ left shift G by 3
- VSRI.8 D27, D26, #3 @ right shift B by 3 and insert to G
-
- SUBS length, length, #8 @ check if the length is less than 8
-
- BMI trailing_yvup2rgb565 @ jump to trailing processing if remaining length is less than 8
-
- VST2.U8 {D27, D28}, [p_rgb]! @ vector store Red, Green, Blue to destination
- @ Blue at LSB
-
- BHI loop_yvup2rgb565 @ loop if more than 8 pixels left
-
- BEQ end_yvup2rgb565 @ done if exactly 8 pixel processed in the loop
-
-
-trailing_yvup2rgb565:
- /*-------------------------------------------------------------------------
- * There are from 1 ~ 7 pixels left in the trailing part.
- * First adding 7 to the length so the length would be from 0 ~ 6.
- * eg: 1 pixel left in the trailing part, so 1-8+7 = 0.
- * Then save 1 pixel unconditionally since at least 1 pixels left in the
- * trailing part.
- * ------------------------------------------------------------------------ */
- ADDS length, length, #7 @ there are 7 or less in the trailing part
-
- VST2.U8 {D27[0], D28[0]}, [p_rgb]! @ at least 1 pixel left in the trailing part
- BEQ end_yvup2rgb565 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST2.U8 {D27[1], D28[1]}, [p_rgb]! @ store one more pixel
- BEQ end_yvup2rgb565 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST2.U8 {D27[2], D28[2]}, [p_rgb]! @ store one more pixel
- BEQ end_yvup2rgb565 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST2.U8 {D27[3], D28[3]}, [p_rgb]! @ store one more pixel
- BEQ end_yvup2rgb565 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST2.U8 {D27[4], D28[4]}, [p_rgb]! @ store one more pixel
- BEQ end_yvup2rgb565 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST2.U8 {D27[5], D28[5]}, [p_rgb]! @ store one more pixel
- BEQ end_yvup2rgb565 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST2.U8 {D27[6], D28[6]}, [p_rgb]! @ store one more pixel
-
-end_yvup2rgb565:
- VPOP {D8-D15}
- LDMFD SP!, {PC}
-
- @ end of yvup2rgb565
-
-
-/*--------------------------------------------------------------------------
-* FUNCTION : yyvup2rgb565_venum
-*--------------------------------------------------------------------------
-* DESCRIPTION : Perform YYVU planar to RGB565 conversion.
-*--------------------------------------------------------------------------
-* C PROTOTYPE : void yyvup2rgb565_venum(uint8_t *p_y,
-* uint8_t *p_cr,
-* uint8_t *p_cb,
-* uint8_t *p_rgb565,
-* uint32_t length)
-*--------------------------------------------------------------------------
-* REG INPUT : R0: uint8_t *p_y
-* pointer to the input Y Line
-* R1: uint8_t *p_cr
-* pointer to the input Cr Line
-* R2: uint8_t *p_cb
-* pointer to the input Cb Line
-* R3: uint8_t *p_rgb565
-* pointer to the output RGB Line
-* R12: uint32_t length
-* width of Line
-*--------------------------------------------------------------------------
-* STACK ARG : None
-*--------------------------------------------------------------------------
-* REG OUTPUT : None
-*--------------------------------------------------------------------------
-* MEM INPUT : p_y - a line of Y pixels
-* p_cr - a line of Cr pixels
-* p_cb - a line of Cb pixels
-* length - the width of the input line
-*--------------------------------------------------------------------------
-* MEM OUTPUT : p_rgb565 - the converted rgb pixels
-*--------------------------------------------------------------------------
-* REG AFFECTED : ARM: R0-R4, R12
-* NEON: Q0-Q15
-*--------------------------------------------------------------------------
-* STACK USAGE : none
-*--------------------------------------------------------------------------
-* CYCLES : none
-*
-*--------------------------------------------------------------------------
-* NOTES :
-*--------------------------------------------------------------------------
-*/
-.type yyvup2rgb565_venum, %function
-yyvup2rgb565_venum:
- /*-------------------------------------------------------------------------
- * Store stack registers
- * ------------------------------------------------------------------------ */
- STMFD SP!, {LR}
-
- VPUSH {D8-D15}
-
- PLD [R0, R3] @ preload luma line
-
- ADR R12, constants
-
- VLD1.S16 {D6, D7}, [R12]! @ D6, D7: 359 | -88 | -183 | 454 | 256 | 0 | 255 | 0
- VLD1.S32 {D30, D31}, [R12] @ Q15 : -45824 | 34816 | -57984 | X
-
- /*-------------------------------------------------------------------------
- * Load the 5th parameter via stack
- * R0 ~ R3 are used to pass the first 4 parameters, the 5th and above
- * parameters are passed via stack
- * ------------------------------------------------------------------------ */
- LDR R12, [SP, #68] @ LR is pushed into the stack so SP is
- @ decreased by 4,
- @ D8-D15 are also pushed into the stack
- @ so SP is decreased by
- @ 8-byte/D-Register * 8 D-Registers = 64,
- @ so SP needs to be increased by 64+4=68
- @ to get the value that was first pushed
- @ into stack (the 5th parameter passed in
- @ throught stack)
-
- /*-------------------------------------------------------------------------
- * Load clamping parameters to duplicate vector elements
- * ------------------------------------------------------------------------ */
- VDUP.S16 Q4, D7[1] @ Q4: 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0
- VDUP.S16 Q5, D7[2] @ Q5: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255
-
- /*-------------------------------------------------------------------------
- * Read bias
- * ------------------------------------------------------------------------ */
- VDUP.S32 Q0, D30[0] @ Q0: -45824 | -45824 | -45824 | -45824
- VDUP.S32 Q1, D30[1] @ Q1: 34816 | 34816 | 34816 | 34816
- VDUP.S32 Q2, D31[0] @ Q2: -70688 | -70688 | -70688 | -70688
-
-
- /*-------------------------------------------------------------------------
- * The main loop
- * ------------------------------------------------------------------------ */
-loop_yyvup2rgb565:
-
- /*-------------------------------------------------------------------------
- * Load input from Y, V and U
- * D12, D13: Y0 Y2 Y4 Y6 Y8 Y10 Y12 Y14, Y1 Y3 Y5 Y7 Y9 Y11 Y13 Y15
- * D14 : V0 V1 V2 V3 V4 V5 V6 V7
- * D15 : U0 U1 U2 U3 U4 U5 U6 U7
- * ------------------------------------------------------------------------ */
- VLD2.U8 {D12,D13}, [p_y]! @ Load 16 Luma elements (uint8) to D12, D13
- VLD1.U8 {D14}, [p_cr]! @ Load 8 Cr elements (uint8) to D14
- VLD1.U8 {D15}, [p_cb]! @ Load 8 Cb elements (uint8) to D15
-
- /*-------------------------------------------------------------------------
- * Expand uint8 value to uint16
- * D24, D25: Y0 Y2 Y4 Y6 Y8 Y10 Y12 Y14
- * D26, D27: Y1 Y3 Y5 Y7 Y9 Y11 Y13 Y15
- * D28, D29: V0 V1 V2 V3 V4 V5 V6 V7
- * D30, D31: U0 U1 U2 U3 U4 U5 U6 U7
- * ------------------------------------------------------------------------ */
- VMOVL.U8 Q12, D12
- VMOVL.U8 Q13, D13
- VMOVL.U8 Q14, D14
- VMOVL.U8 Q15, D15
-
- /*-------------------------------------------------------------------------
- * Multiply contribution from chrominance, results are in 32-bit
- * ------------------------------------------------------------------------ */
- VMULL.S16 Q6, D28, D6[0] @ Q6: 359*(V0,V1,V2,V3) Red
- VMULL.S16 Q7, D30, D6[1] @ Q7: -88*(U0,U1,U2,U3) Green
- VMLAL.S16 Q7, D28, D6[2] @ q7: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3)
- VMULL.S16 Q8, D30, D6[3] @ q8: 454*(U0,U1,U2,U3) Blue
-
- /*-------------------------------------------------------------------------
- * Add bias
- * ------------------------------------------------------------------------ */
- VADD.S32 Q6, Q0 @ Q6 add Red bias -45824
- VADD.S32 Q7, Q1 @ Q7 add Green bias 34816
- VADD.S32 Q8, Q2 @ Q8 add Blue bias -57984
-
- /*-------------------------------------------------------------------------
- * Calculate Red, Green, Blue
- * ------------------------------------------------------------------------ */
- VMOV.S32 Q9, Q6
- VMLAL.S16 Q6, D24, D7[0] @ Q6: R0, R2, R4, R6 in 32-bit Q8 format
- VMLAL.S16 Q9, D26, D7[0] @ Q9: R1, R3, R5, R7 in 32-bit Q8 format
-
- VMOV.S32 Q10, Q7
- VMLAL.S16 Q7, D24, D7[0] @ Q7: G0, G2, G4, G6 in 32-bit Q8 format
- VMLAL.S16 Q10, D26, D7[0] @ Q10: G1, G3, G5, G7 in 32-bit Q8 format
-
- VMOV.S32 Q11, Q8
- VMLAL.S16 Q8, D24, D7[0] @ Q8: B0, B2, B4, B6 in 32-bit Q8 format
- VMLAL.S16 Q11, D26, D7[0] @ Q11: B1, B3, B5, B7 in 32-bit Q8 format
-
- /*-------------------------------------------------------------------------
- * Right shift eight bits with rounding
- * ------------------------------------------------------------------------ */
- VSHRN.S32 D12, Q6, #8 @ D12: R0 R2 R4 R6 in 16-bit Q0 format
- VSHRN.S32 D13, Q9, #8 @ D13: R1 R3 R5 R7 in 16-bit Q0 format
- VZIP.16 D12, D13 @ Q6 : R0 R1 R2 R3 R4 R5 R6 R7
-
- VSHRN.S32 D18, Q7, #8 @ D18: G0 G2 G4 G6 in 16-bit Q0 format
- VSHRN.S32 D19, Q10, #8 @ D19: G1 G3 G5 G7 in 16-bit Q0 format
- VZIP.16 D18, D19 @ Q9 : G0 G1 G2 G3 G4 G5 G6 G7
-
- VSHRN.S32 D20, Q8, #8 @ D20: B0 B2 B4 B6 in 16-bit Q0 format
- VSHRN.S32 D21, Q11, #8 @ D21: B1 B3 B5 B7 in 16-bit Q0 format
- VZIP.16 D20, D21 @ Q10: B0 B1 B2 B3 B4 B5 B6 B7
-
- /*-------------------------------------------------------------------------
- * Clamp the value to be within [0~255]
- * ------------------------------------------------------------------------ */
- VMAX.S16 Q6, Q6, Q4 @ if Q6 < 0, Q6 = 0
- VMIN.S16 Q6, Q6, Q5 @ if Q6 > 255, Q6 = 255
- VQMOVUN.S16 D23, Q6 @ store Red to D23, narrow the value from int16 to int8
-
- VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0
- VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255
- VQMOVUN.S16 D22, Q9 @ store Green to D22, narrow the value from int16 to int8
-
- VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0
- VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255
- VQMOVUN.S16 D21, Q10 @ store Blue to D21, narrow the value from int16 to int8
-
- /*-------------------------------------------------------------------------
- * D22: 3 bits of Green + 5 bits of Blue
- * D23: 5 bits of Red + 3 bits of Green
- * ------------------------------------------------------------------------ */
- VSRI.8 D23, D22, #5 @ right shift G by 5 and insert to R
- VSHL.U8 D22, D22, #3 @ left shift G by 3
- VSRI.8 D22, D21, #3 @ right shift B by 3 and insert to G
-
- SUBS length, length, #8 @ check if the length is less than 8
-
- BMI trailing_yyvup2rgb565 @ jump to trailing processing if remaining length is less than 8
-
- VST2.U8 {D22,D23}, [p_rgb]! @ vector store Red, Green, Blue to destination
- @ Blue at LSB
-
- BEQ end_yyvup2rgb565 @ done if exactly 8 pixel processed in the loop
-
-
- /*-------------------------------------------------------------------------
- * Done with the first 8 elements, continue on the next 8 elements
- * ------------------------------------------------------------------------ */
-
- /*-------------------------------------------------------------------------
- * Multiply contribution from chrominance, results are in 32-bit
- * ------------------------------------------------------------------------ */
- VMULL.S16 Q6, D29, D6[0] @ Q6: 359*(V4,V5,V6,V7) Red
- VMULL.S16 Q7, D31, D6[1] @ Q7: -88*(U4,U5,U6,U7) Green
- VMLAL.S16 Q7, D29, D6[2] @ Q7: -88*(U4,U5,U6,U7) - 183*(V4,V5,V6,V7)
- VMULL.S16 Q8, D31, D6[3] @ Q8: 454*(U4,U5,U6,U7) Blue
-
- /*-------------------------------------------------------------------------
- * Add bias
- * ------------------------------------------------------------------------ */
- VADD.S32 Q6, Q0 @ Q6 add Red bias -45824
- VADD.S32 Q7, Q1 @ Q7 add Green bias 34816
- VADD.S32 Q8, Q2 @ Q8 add Blue bias -57984
-
- /*-------------------------------------------------------------------------
- * Calculate Red, Green, Blue
- * ------------------------------------------------------------------------ */
- VMOV.S32 Q9, Q6
- VMLAL.S16 Q6, D25, D7[0] @ Q6: R8 R10 R12 R14 in 32-bit Q8 format
- VMLAL.S16 Q9, D27, D7[0] @ Q9: R9 R11 R13 R15 in 32-bit Q8 format
-
- VMOV.S32 Q10, Q7
- VMLAL.S16 Q7, D25, D7[0] @ Q7: G0, G2, G4, G6 in 32-bit Q8 format
- VMLAL.S16 Q10, D27, D7[0] @ Q10 : G1, G3, G5, G7 in 32-bit Q8 format
-
- VMOV.S32 Q11, Q8
- VMLAL.S16 Q8, D25, D7[0] @ Q8: B0, B2, B4, B6 in 32-bit Q8 format
- VMLAL.S16 Q11, D27, D7[0] @ Q11 : B1, B3, B5, B7 in 32-bit Q8 format
-
- /*-------------------------------------------------------------------------
- * Right shift eight bits with rounding
- * ------------------------------------------------------------------------ */
- VSHRN.S32 D12, Q6, #8 @ D12: R8 R10 R12 R14 in 16-bit Q0 format
- VSHRN.S32 D13, Q9, #8 @ D13: R9 R11 R13 R15 in 16-bit Q0 format
- VZIP.16 D12, D13 @ Q6: R8 R9 R10 R11 R12 R13 R14 R15
-
- VSHRN.S32 D18, Q7, #8 @ D18: G8 G10 G12 G14 in 16-bit Q0 format
- VSHRN.S32 D19, Q10, #8 @ D19: G9 G11 G13 G15 in 16-bit Q0 format
- VZIP.16 D18, D19 @ Q9: G8 G9 G10 G11 G12 G13 G14 G15
-
- VSHRN.S32 D20, Q8, #8 @ D20: B8 B10 B12 B14 in 16-bit Q0 format
- VSHRN.S32 D21, Q11, #8 @ D21: B9 B11 B13 B15 in 16-bit Q0 format
- VZIP.16 D20, D21 @ Q10: B8 B9 B10 B11 B12 B13 B14 B15
-
- /*-------------------------------------------------------------------------
- * Clamp the value to be within [0~255]
- * ------------------------------------------------------------------------ */
- VMAX.S16 Q6, Q6, Q4 @ if Q6 < 0, Q6 = 0
- VMIN.S16 Q6, Q6, Q5 @ if Q6 > 255, Q6 = 255
- VQMOVUN.S16 D23, Q6 @ store Red to D23, narrow the value from int16 to int8
-
- VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0
- VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255
- VQMOVUN.S16 D22, Q9 @ store Green to D22, narrow the value from int16 to int8
-
- VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0
- VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255
- VQMOVUN.S16 D21, Q10 @ store Blue to D21, narrow the value from int16 to int8
-
- /*-------------------------------------------------------------------------
- * D22: 3 bits of Green + 5 bits of Blue
- * D23: 5 bits of Red + 3 bits of Green
- * ------------------------------------------------------------------------ */
- VSRI.8 D23, D22, #5 @ right shift G by 5 and insert to R
- VSHL.U8 D22, D22, #3 @ left shift G by 3
- VSRI.8 D22, D21, #3 @ right shift B by 3 and insert to G
-
- SUBS length, length, #8 @ check if the length is less than 8
-
- BMI trailing_yyvup2rgb565 @ jump to trailing processing if remaining length is less than 8
-
- VST2.U8 {D22,D23}, [p_rgb]! @ vector store Red, Green, Blue to destination
- @ Blue at LSB
-
- BHI loop_yyvup2rgb565 @ loop if more than 8 pixels left
-
- BEQ end_yyvup2rgb565 @ done if exactly 8 pixel processed in the loop
-
-
-trailing_yyvup2rgb565:
- /*-------------------------------------------------------------------------
- * There are from 1 ~ 7 pixels left in the trailing part.
- * First adding 7 to the length so the length would be from 0 ~ 6.
- * eg: 1 pixel left in the trailing part, so 1-8+7 = 0.
- * Then save 1 pixel unconditionally since at least 1 pixels left in the
- * trailing part.
- * ------------------------------------------------------------------------ */
- ADDS length, length, #7 @ there are 7 or less in the trailing part
-
- VST2.U8 {D22[0],D23[0]}, [p_rgb]! @ at least 1 pixel left in the trailing part
- BEQ end_yyvup2rgb565 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST2.U8 {D22[1],D23[1]}, [p_rgb]! @ store one more pixel
- BEQ end_yyvup2rgb565 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST2.U8 {D22[2],D23[2]}, [p_rgb]! @ store one more pixel
- BEQ end_yyvup2rgb565 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST2.U8 {D22[3],D23[3]}, [p_rgb]! @ store one more pixel
- BEQ end_yyvup2rgb565 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST2.U8 {D22[4],D23[4]}, [p_rgb]! @ store one more pixel
- BEQ end_yyvup2rgb565 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST2.U8 {D22[5],D23[5]}, [p_rgb]! @ store one more pixel
- BEQ end_yyvup2rgb565 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST2.U8 {D22[6],D23[6]}, [p_rgb]! @ store one more pixel
-
-end_yyvup2rgb565:
- VPOP {D8-D15}
- LDMFD SP!, {PC}
-
- @ end of yyvup2rgb565
-
-constants:
- .hword (COEFF_V_RED), (COEFF_U_GREEN), (COEFF_V_GREEN), (COEFF_U_BLUE) @ 359 | -88 | -183 | 454
- .hword (COEFF_Y), (COEFF_0), (COEFF_255) , (COEFF_0) @ 256 | 0 | 255 | 0
- .word (COEFF_BIAS_R), (COEFF_BIAS_G), (COEFF_BIAS_B) @ -45824 | 34816 | -57984 | X
-
-/*--------------------------------------------------------------------------
-* FUNCTION : yvup2abgr8888_venum
-*--------------------------------------------------------------------------
-* DESCRIPTION : Perform YVU planar to ABGR8888 conversion.
-*--------------------------------------------------------------------------
-* C PROTOTYPE : void yvup2abgr8888_venum(uint8_t *p_y,
-* uint8_t *p_cr,
-* uint8_t *p_cb,
-* uint8_t *p_abgr8888,
-* uint32_t length)
-*--------------------------------------------------------------------------
-* REG INPUT : R0: uint8_t *p_y
-* pointer to the input Y Line
-* R1: uint8_t *p_cr
-* pointer to the input Cr Line
-* R2: uint8_t *p_cb
-* pointer to the input Cb Line
-* R3: uint8_t *p_abgr8888
-* pointer to the output ABGR Line
-* R12: uint32_t length
-* width of Line
-*--------------------------------------------------------------------------
-* STACK ARG : None
-*--------------------------------------------------------------------------
-* REG OUTPUT : None
-*--------------------------------------------------------------------------
-* MEM INPUT : p_y - a line of Y pixels
-* p_cr - a line of Cr pixels
-* p_cb - a line of Cb pixels
-* length - the width of the input line
-*--------------------------------------------------------------------------
-* MEM OUTPUT : p_abgr8888 - the converted ABGR pixels
-*--------------------------------------------------------------------------
-* REG AFFECTED : ARM: R0-R4, R12
-* NEON: Q0-Q15
-*--------------------------------------------------------------------------
-* STACK USAGE : none
-*--------------------------------------------------------------------------
-* CYCLES : none
-*
-*--------------------------------------------------------------------------
-* NOTES :
-*--------------------------------------------------------------------------
-*/
-.type yvup2abgr8888_venum, %function
-yvup2abgr8888_venum:
- /*-------------------------------------------------------------------------
- * Store stack registers
- * ------------------------------------------------------------------------ */
- STMFD SP!, {LR}
-
- VPUSH {D8-D15}
-
- PLD [R0, R3] @ preload luma line
-
- ADR R12, constants
-
- VLD1.S16 {D6, D7}, [R12]! @ D6, D7: 359 | -88 | -183 | 454 | 256 | 0 | 255 | 0
- VLD1.S32 {D30, D31}, [R12] @ Q15 : -45824 | 34816 | -57984 | X
-
- /*-------------------------------------------------------------------------
- * Load the 5th parameter via stack
- * R0 ~ R3 are used to pass the first 4 parameters, the 5th and above
- * parameters are passed via stack
- * ------------------------------------------------------------------------ */
- LDR R12, [SP, #68] @ LR is pushed into the stack so SP is
- @ decreased by 4,
- @ D8-D15 are also pushed into the stack
- @ so SP is decreased by
- @ 8-byte/D-Register * 8 D-Registers = 64,
- @ so SP needs to be increased by 64+4=68
- @ to get the value that was first pushed
- @ into stack (the 5th parameter passed in
- @ throught stack)
-
- /*-------------------------------------------------------------------------
- * Load clamping parameters to duplicate vector elements
- * ------------------------------------------------------------------------ */
- VDUP.S16 Q4, D7[1] @ Q4: 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0
- VDUP.S16 Q5, D7[2] @ Q5: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255
-
- /*-------------------------------------------------------------------------
- * Read bias
- * ------------------------------------------------------------------------ */
- VDUP.S32 Q0, D30[0] @ Q0: -45824 | -45824 | -45824 | -45824
- VDUP.S32 Q1, D30[1] @ Q1: 34816 | 34816 | 34816 | 34816
- VDUP.S32 Q2, D31[0] @ Q2: -70688 | -70688 | -70688 | -70688
-
-
- /*-------------------------------------------------------------------------
- * The main loop
- * ------------------------------------------------------------------------ */
-loop_yvup2abgr:
-
- /*-------------------------------------------------------------------------
- * Load input from Y, V and U
- * D12 : Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7
- * D14 : V0 V1 V2 V3 V4 V5 V6 V7
- * D15 : U0 U1 U2 U3 U4 U5 U6 U7
- * ------------------------------------------------------------------------ */
- VLD1.U8 {D12}, [p_y]! @ Load 8 Luma elements (uint8) to D12
- VLD1.U8 {D14}, [p_cr]! @ Load 8 Cr elements (uint8) to D14
- VLD1.U8 {D15}, [p_cb]! @ Load 8 Cb elements (uint8) to D15
-
- /*-------------------------------------------------------------------------
- * Expand uint8 value to uint16
- * D18, D19: Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7
- * D20, D21: V0 V1 V2 V3 V4 V5 V6 V7
- * D22, D23: U0 U1 U2 U3 U4 U5 U6 U7
- * ------------------------------------------------------------------------ */
- VMOVL.U8 Q9, D12
- VMOVL.U8 Q10, D14
- VMOVL.U8 Q11, D15
-
- /*-------------------------------------------------------------------------
- * Multiply contribution from chrominance, results are in 32-bit
- * ------------------------------------------------------------------------ */
- VMULL.S16 Q12, D20, D6[0] @ Q12: 359*(V0,V1,V2,V3) Red
- VMULL.S16 Q13, D22, D6[1] @ Q13: -88*(U0,U1,U2,U3) Green
- VMLAL.S16 Q13, D20, D6[2] @ Q13: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3)
- VMULL.S16 Q14, D22, D6[3] @ Q14: 454*(U0,U1,U2,U3) Blue
-
- /*-------------------------------------------------------------------------
- * Add bias
- * ------------------------------------------------------------------------ */
- VADD.S32 Q12, Q0 @ Q12 add Red bias -45824
- VADD.S32 Q13, Q1 @ Q13 add Green bias 34816
- VADD.S32 Q14, Q2 @ Q14 add Blue bias -57984
-
- /*-------------------------------------------------------------------------
- * Calculate Red, Green, Blue
- * ------------------------------------------------------------------------ */
- VMLAL.S16 Q12, D18, D7[0] @ Q12: R0, R1, R2, R3 in 32-bit Q8 format
- VMLAL.S16 Q13, D18, D7[0] @ Q13: G0, G1, G2, G3 in 32-bit Q8 format
- VMLAL.S16 Q14, D18, D7[0] @ Q14: B0, B1, B2, B3 in 32-bit Q8 format
-
- /*-------------------------------------------------------------------------
- * Right shift eight bits with rounding
- * ------------------------------------------------------------------------ */
- VSHRN.S32 D18 , Q12, #8 @ D18: R0, R1, R2, R3 in 16-bit Q0 format
- VSHRN.S32 D20 , Q13, #8 @ D20: G0, G1, G2, G3 in 16-bit Q0 format
- VSHRN.S32 D22, Q14, #8 @ D22: B0, B1, B2, B3 in 16-bit Q0 format
-
- /*-------------------------------------------------------------------------
- * Done with the first 4 elements, continue on the next 4 elements
- * ------------------------------------------------------------------------ */
-
- /*-------------------------------------------------------------------------
- * Multiply contribution from chrominance, results are in 32-bit
- * ------------------------------------------------------------------------ */
- VMULL.S16 Q12, D21, D6[0] @ Q12: 359*(V0,V1,V2,V3) Red
- VMULL.S16 Q13, D23, D6[1] @ Q13: -88*(U0,U1,U2,U3) Green
- VMLAL.S16 Q13, D21, D6[2] @ Q13: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3)
- VMULL.S16 Q14, D23, D6[3] @ Q14: 454*(U0,U1,U2,U3) Blue
-
- /*-------------------------------------------------------------------------
- * Add bias
- * ------------------------------------------------------------------------ */
- VADD.S32 Q12, Q0 @ Q12 add Red bias -45824
- VADD.S32 Q13, Q1 @ Q13 add Green bias 34816
- VADD.S32 Q14, Q2 @ Q14 add Blue bias -57984
-
- /*-------------------------------------------------------------------------
- * Calculate Red, Green, Blue
- * ------------------------------------------------------------------------ */
- VMLAL.S16 Q12, D19, D7[0] @ Q12: R0, R1, R2, R3 in 32-bit Q8 format
- VMLAL.S16 Q13, D19, D7[0] @ Q13: G0, G1, G2, G3 in 32-bit Q8 format
- VMLAL.S16 Q14, D19, D7[0] @ Q14: B0, B1, B2, B3 in 32-bit Q8 format
-
- /*-------------------------------------------------------------------------
- * Right shift eight bits with rounding
- * ------------------------------------------------------------------------ */
- VSHRN.S32 D19 , Q12, #8 @ D18: R0, R1, R2, R3 in 16-bit Q0 format
- VSHRN.S32 D21 , Q13, #8 @ D20: G0, G1, G2, G3 in 16-bit Q0 format
- VSHRN.S32 D23, Q14, #8 @ D22: B0, B1, B2, B3 in 16-bit Q0 format
-
- /*-------------------------------------------------------------------------
- * Clamp the value to be within [0~255]
- * ------------------------------------------------------------------------ */
- VMAX.S16 Q11, Q11, Q4 @ if Q11 < 0, Q11 = 0
- VMIN.S16 Q11, Q11, Q5 @ if Q11 > 255, Q11 = 255
- VQMOVUN.S16 D28, Q11 @ store Blue to D28, narrow the value from int16 to int8
-
- VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0
- VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255
- VQMOVUN.S16 D27, Q10 @ store Green to D27, narrow the value from int16 to int8
-
- VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0
- VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255
- VQMOVUN.S16 D26, Q9 @ store Red to D26, narrow the value from int16 to int8
-
- /*-------------------------------------------------------------------------
- * abgr format with leading 0xFF byte
- * ------------------------------------------------------------------------ */
- VMOVN.I16 D29, Q5 @ D29: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255
-
- SUBS length, length, #8 @ check if the length is less than 8
-
- BMI trailing_yvup2abgr @ jump to trailing processing if remaining length is less than 8
-
- VST4.U8 {D26,D27,D28,D29}, [p_bgr]! @ vector store Red, Green, Blue to destination
- @ Blue at LSB
-
- BHI loop_yvup2abgr @ loop if more than 8 pixels left
-
- BEQ end_yvup2abgr @ done if exactly 8 pixel processed in the loop
-
-
-trailing_yvup2abgr:
- /*-------------------------------------------------------------------------
- * There are from 1 ~ 7 pixels left in the trailing part.
- * First adding 7 to the length so the length would be from 0 ~ 6.
- * eg: 1 pixel left in the trailing part, so 1-8+7 = 0.
- * Then save 1 pixel unconditionally since at least 1 pixels left in the
- * trailing part.
- * ------------------------------------------------------------------------ */
- ADDS length, length, #7 @ there are 7 or less in the trailing part
-
- VST4.U8 {D26[0], D27[0], D28[0], D29[0]}, [p_bgr]! @ at least 1 pixel left in the trailing part
- BEQ end_yvup2abgr @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST4.U8 {D26[1], D27[1], D28[1], D29[1]}, [p_bgr]! @ store one more pixel
- BEQ end_yvup2abgr @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST4.U8 {D26[2], D27[2], D28[2], D29[2]}, [p_bgr]! @ store one more pixel
- BEQ end_yvup2abgr @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST4.U8 {D26[3], D27[3], D28[3], D29[3]}, [p_bgr]! @ store one more pixel
- BEQ end_yvup2abgr @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST4.U8 {D26[4], D27[4], D28[4], D29[4]}, [p_bgr]! @ store one more pixel
- BEQ end_yvup2abgr @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST4.U8 {D26[5], D27[5], D28[5], D29[5]}, [p_bgr]! @ store one more pixel
- BEQ end_yvup2abgr @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST4.U8 {D26[6], D27[6], D28[6], D29[6]}, [p_bgr]! @ store one more pixel
-
-end_yvup2abgr:
- VPOP {D8-D15}
- LDMFD SP!, {PC}
- @ end of yvup2abgr
-
-/*--------------------------------------------------------------------------
-* FUNCTION : yyvup2abgr8888_venum
-*--------------------------------------------------------------------------
-* DESCRIPTION : Perform YYVU planar to ABGR8888 conversion.
-*--------------------------------------------------------------------------
-* C PROTOTYPE : void yyvup2abgr8888_venum(uint8_t *p_y,
-* uint8_t *p_cr,
-* uint8_t *p_cb,
-* uint8_t *p_abgr8888,
-* uint32_t length)
-*--------------------------------------------------------------------------
-* REG INPUT : R0: uint8_t *p_y
-* pointer to the input Y Line
-* R1: uint8_t *p_cr
-* pointer to the input Cr Line
-* R2: uint8_t *p_cb
-* pointer to the input Cb Line
-* R3: uint8_t *p_abgr8888
-* pointer to the output ABGR Line
-* R12: uint32_t length
-* width of Line
-*--------------------------------------------------------------------------
-* STACK ARG : None
-*--------------------------------------------------------------------------
-* REG OUTPUT : None
-*--------------------------------------------------------------------------
-* MEM INPUT : p_y - a line of Y pixels
-* p_cr - a line of Cr pixels
-* p_cb - a line of Cb pixels
-* length - the width of the input line
-*--------------------------------------------------------------------------
-* MEM OUTPUT : p_abgr8888 - the converted ABGR pixels
-*--------------------------------------------------------------------------
-* REG AFFECTED : ARM: R0-R4, R12
-* NEON: Q0-Q15
-*--------------------------------------------------------------------------
-* STACK USAGE : none
-*--------------------------------------------------------------------------
-* CYCLES : none
-*
-*--------------------------------------------------------------------------
-* NOTES :
-*--------------------------------------------------------------------------
-*/
-.type yyvup2abgr8888_venum, %function
-yyvup2abgr8888_venum:
- /*-------------------------------------------------------------------------
- * Store stack registers
- * ------------------------------------------------------------------------ */
- STMFD SP!, {LR}
-
- VPUSH {D8-D15}
-
- PLD [R0, R3] @ preload luma line
-
- ADR R12, constants
-
- VLD1.S16 {D6, D7}, [R12]! @ D6, D7: 359 | -88 | -183 | 454 | 256 | 0 | 255 | 0
- VLD1.S32 {D30, D31}, [R12] @ Q15 : -45824 | 34816 | -57984 | X
-
- /*-------------------------------------------------------------------------
- * Load the 5th parameter via stack
- * R0 ~ R3 are used to pass the first 4 parameters, the 5th and above
- * parameters are passed via stack
- * ------------------------------------------------------------------------ */
- LDR R12, [SP, #68] @ LR is pushed into the stack so SP is
- @ decreased by 4,
- @ D8-D15 are also pushed into the stack
- @ so SP is decreased by
- @ 8-byte/D-Register * 8 D-Registers = 64,
- @ so SP needs to be increased by 64+4=68
- @ to get the value that was first pushed
- @ into stack (the 5th parameter passed in
- @ throught stack)
-
- /*-------------------------------------------------------------------------
- * Load clamping parameters to duplicate vector elements
- * ------------------------------------------------------------------------ */
- VDUP.S16 Q4, D7[1] @ Q4: 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0
- VDUP.S16 Q5, D7[2] @ Q5: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255
-
- /*-------------------------------------------------------------------------
- * Read bias
- * ------------------------------------------------------------------------ */
- VDUP.S32 Q0, D30[0] @ Q0: -45824 | -45824 | -45824 | -45824
- VDUP.S32 Q1, D30[1] @ Q1: 34816 | 34816 | 34816 | 34816
- VDUP.S32 Q2, D31[0] @ Q2: -70688 | -70688 | -70688 | -70688
-
-
- /*-------------------------------------------------------------------------
- * The main loop
- * ------------------------------------------------------------------------ */
-loop_yyvup2abgr:
-
- /*-------------------------------------------------------------------------
- * Load input from Y, V and U
- * D12, D13: Y0 Y2 Y4 Y6 Y8 Y10 Y12 Y14, Y1 Y3 Y5 Y7 Y9 Y11 Y13 Y15
- * D14 : V0 V1 V2 V3 V4 V5 V6 V7
- * D15 : U0 U1 U2 U3 U4 U5 U6 U7
- * ------------------------------------------------------------------------ */
- VLD2.U8 {D12,D13}, [p_y]! @ Load 16 Luma elements (uint8) to D12, D13
- VLD1.U8 {D14}, [p_cr]! @ Load 8 Cr elements (uint8) to D14
- VLD1.U8 {D15}, [p_cb]! @ Load 8 Cb elements (uint8) to D15
-
- /*-------------------------------------------------------------------------
- * Expand uint8 value to uint16
- * D24, D25: Y0 Y2 Y4 Y6 Y8 Y10 Y12 Y14
- * D26, D27: Y1 Y3 Y5 Y7 Y9 Y11 Y13 Y15
- * D28, D29: V0 V1 V2 V3 V4 V5 V6 V7
- * D30, D31: U0 U1 U2 U3 U4 U5 U6 U7
- * ------------------------------------------------------------------------ */
- VMOVL.U8 Q12, D12
- VMOVL.U8 Q13, D13
- VMOVL.U8 Q14, D14
- VMOVL.U8 Q15, D15
-
- /*-------------------------------------------------------------------------
- * Multiply contribution from chrominance, results are in 32-bit
- * ------------------------------------------------------------------------ */
- VMULL.S16 Q6, D28, D6[0] @ Q6: 359*(V0,V1,V2,V3) Red
- VMULL.S16 Q7, D30, D6[1] @ Q7: -88*(U0,U1,U2,U3) Green
- VMLAL.S16 Q7, D28, D6[2] @ Q7: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3)
- VMULL.S16 Q8, D30, D6[3] @ Q8: 454*(U0,U1,U2,U3) Blue
-
- /*-------------------------------------------------------------------------
- * Add bias
- * ------------------------------------------------------------------------ */
- VADD.S32 Q6, Q0 @ Q6 add Red bias -45824
- VADD.S32 Q7, Q1 @ Q7 add Green bias 34816
- VADD.S32 Q8, Q2 @ Q8 add Blue bias -57984
-
- /*-------------------------------------------------------------------------
- * Calculate Red, Green, Blue
- * ------------------------------------------------------------------------ */
- VMOV.S32 Q9, Q6
- VMLAL.S16 Q6, D24, D7[0] @ Q6: R0, R2, R4, R6 in 32-bit Q8 format
- VMLAL.S16 Q9, D26, D7[0] @ Q9: R1, R3, R5, R7 in 32-bit Q8 format
-
- VMOV.S32 Q10, Q7
- VMLAL.S16 Q7, D24, D7[0] @ Q7: G0, G2, G4, G6 in 32-bit Q8 format
- VMLAL.S16 Q10, D26, D7[0] @ Q10: G1, G3, G5, G7 in 32-bit Q8 format
-
- VMOV.S32 Q11, Q8
- VMLAL.S16 Q8, D24, D7[0] @ Q8: B0, B2, B4, B6 in 32-bit Q8 format
- VMLAL.S16 Q11, D26, D7[0] @ Q11: B1, B3, B5, B7 in 32-bit Q8 format
-
- /*-------------------------------------------------------------------------
- * Right shift eight bits with rounding
- * ------------------------------------------------------------------------ */
- VSHRN.S32 D12, Q6, #8 @ D12: R0 R2 R4 R6 in 16-bit Q0 format
- VSHRN.S32 D13, Q9, #8 @ D13: R1 R3 R5 R7 in 16-bit Q0 format
- VZIP.16 D12, D13 @ Q6 : R0 R1 R2 R3 R4 R5 R6 R7
-
- VSHRN.S32 D18, Q7, #8 @ D18: G0 G2 G4 G6 in 16-bit Q0 format
- VSHRN.S32 D19, Q10, #8 @ D19: G1 G3 G5 G7 in 16-bit Q0 format
- VZIP.16 D18, D19 @ Q9 : G0 G1 G2 G3 G4 G5 G6 G7
-
- VSHRN.S32 D20, Q8, #8 @ D20: B0 B2 B4 B6 in 16-bit Q0 format
- VSHRN.S32 D21, Q11, #8 @ D21: B1 B3 B5 B7 in 16-bit Q0 format
- VZIP.16 D20, D21 @ Q10: B0 B1 B2 B3 B4 B5 B6 B7
-
- /*-------------------------------------------------------------------------
- * Clamp the value to be within [0~255]
- * ------------------------------------------------------------------------ */
- VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0
- VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255
- VQMOVUN.S16 D23, Q10 @ store Blue to D23, narrow the value from int16 to int8
-
- VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0
- VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255
- VQMOVUN.S16 D22, Q9 @ store Green to D22, narrow the value from int16 to int8
-
- VMAX.S16 Q6, Q6, Q4 @ if Q6 < 0, Q6 = 0
- VMIN.S16 Q6, Q6, Q5 @ if Q6 > 255, Q6 = 255
- VQMOVUN.S16 D21, Q6 @ store Red to D21, narrow the value from int16 to int8
-
- /*-------------------------------------------------------------------------
- * abgr format with leading 0xFF byte
- * ------------------------------------------------------------------------ */
- VMOVN.I16 D24, Q5 @ D24: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255
-
- SUBS length, length, #8 @ check if the length is less than 8
-
- BMI trailing_yyvup2abgr @ jump to trailing processing if remaining length is less than 8
-
- VST4.U8 {D21,D22,D23,D24}, [p_bgr]! @ vector store Blue, Green, Red to destination
- @ Red at LSB
-
- BEQ end_yyvup2abgr @ done if exactly 8 pixel processed in the loop
-
-
- /*-------------------------------------------------------------------------
- * Done with the first 8 elements, continue on the next 8 elements
- * ------------------------------------------------------------------------ */
-
- /*-------------------------------------------------------------------------
- * Multiply contribution from chrominance, results are in 32-bit
- * ------------------------------------------------------------------------ */
- VMULL.S16 Q6, D29, D6[0] @ Q6: 359*(V4,V5,V6,V7) Red
- VMULL.S16 Q7, D31, D6[1] @ Q7: -88*(U4,U5,U6,U7) Green
- VMLAL.S16 Q7, D29, D6[2] @ Q7: -88*(U4,U5,U6,U7) - 183*(V4,V5,V6,V7)
- VMULL.S16 Q8, D31, D6[3] @ Q8: 454*(U4,U5,U6,U7) Blue
-
- /*-------------------------------------------------------------------------
- * Add bias
- * ------------------------------------------------------------------------ */
- VADD.S32 Q6, Q0 @ Q6 add Red bias -45824
- VADD.S32 Q7, Q1 @ Q7 add Green bias 34816
- VADD.S32 Q8, Q2 @ Q8 add Blue bias -57984
-
- /*-------------------------------------------------------------------------
- * Calculate Red, Green, Blue
- * ------------------------------------------------------------------------ */
- VMOV.S32 Q9, Q6
- VMLAL.S16 Q6, D25, D7[0] @ Q6: R8 R10 R12 R14 in 32-bit Q8 format
- VMLAL.S16 Q9, D27, D7[0] @ Q9: R9 R11 R13 R15 in 32-bit Q8 format
-
- VMOV.S32 Q10, Q7
- VMLAL.S16 Q7, D25, D7[0] @ Q7: G0, G2, G4, G6 in 32-bit Q8 format
- VMLAL.S16 Q10, D27, D7[0] @ Q10 : G1, G3, G5, G7 in 32-bit Q8 format
-
- VMOV.S32 Q11, Q8
- VMLAL.S16 Q8, D25, D7[0] @ Q8: B0, B2, B4, B6 in 32-bit Q8 format
- VMLAL.S16 Q11, D27, D7[0] @ Q11 : B1, B3, B5, B7 in 32-bit Q8 format
-
- /*-------------------------------------------------------------------------
- * Right shift eight bits with rounding
- * ------------------------------------------------------------------------ */
- VSHRN.S32 D12, Q6, #8 @ D12: R8 R10 R12 R14 in 16-bit Q0 format
- VSHRN.S32 D13, Q9, #8 @ D13: R9 R11 R13 R15 in 16-bit Q0 format
- VZIP.16 D12, D13 @ Q6: R8 R9 R10 R11 R12 R13 R14 R15
-
- VSHRN.S32 D18, Q7, #8 @ D18: G8 G10 G12 G14 in 16-bit Q0 format
- VSHRN.S32 D19, Q10, #8 @ D19: G9 G11 G13 G15 in 16-bit Q0 format
- VZIP.16 D18, D19 @ Q9: G8 G9 G10 G11 G12 G13 G14 G15
-
- VSHRN.S32 D20, Q8, #8 @ D20: B8 B10 B12 B14 in 16-bit Q0 format
- VSHRN.S32 D21, Q11, #8 @ D21: B9 B11 B13 B15 in 16-bit Q0 format
- VZIP.16 D20, D21 @ Q10: B8 B9 B10 B11 B12 B13 B14 B15
-
- /*-------------------------------------------------------------------------
- * Clamp the value to be within [0~255]
- * ------------------------------------------------------------------------ */
- VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0
- VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255
- VQMOVUN.S16 D23, Q10 @ store Blue to D23, narrow the value from int16 to int8
-
- VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0
- VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255
- VQMOVUN.S16 D22, Q9 @ store Green to D22, narrow the value from int16 to int8
-
- VMAX.S16 Q6, Q6, Q4 @ if Q6 < 0, Q6 = 0
- VMIN.S16 Q6, Q6, Q5 @ if Q6 > 255, Q6 = 255
- VQMOVUN.S16 D21, Q6 @ store Red to D21, narrow the value from int16 to int8
-
- /*-------------------------------------------------------------------------
- * abgr format with leading 0xFF byte
- * ------------------------------------------------------------------------ */
- VMOVN.I16 D24, Q5 @ D24: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255
-
- SUBS length, length, #8 @ check if the length is less than 8
-
- BMI trailing_yyvup2abgr @ jump to trailing processing if remaining length is less than 8
-
- VST4.U8 {D21,D22,D23,D24}, [p_bgr]! @ vector store Blue, Green, Red to destination
- @ Red at LSB
-
- BHI loop_yyvup2abgr @ loop if more than 8 pixels left
-
- BEQ end_yyvup2abgr @ done if exactly 8 pixel processed in the loop
-
-
-trailing_yyvup2abgr:
- /*-------------------------------------------------------------------------
- * There are from 1 ~ 7 pixels left in the trailing part.
- * First adding 7 to the length so the length would be from 0 ~ 6.
- * eg: 1 pixel left in the trailing part, so 1-8+7 = 0.
- * Then save 1 pixel unconditionally since at least 1 pixels left in the
- * trailing part.
- * ------------------------------------------------------------------------ */
- ADDS length, length, #7 @ there are 7 or less in the trailing part
-
- VST4.U8 {D21[0],D22[0],D23[0],D24[0]}, [p_bgr]! @ at least 1 pixel left in the trailing part
- BEQ end_yyvup2abgr @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST4.U8 {D21[1],D22[1],D23[1],D24[1]}, [p_bgr]! @ store one more pixel
- BEQ end_yyvup2abgr @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST4.U8 {D21[2],D22[2],D23[2],D24[2]}, [p_bgr]! @ store one more pixel
- BEQ end_yyvup2abgr @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST4.U8 {D21[3],D22[3],D23[3],D24[3]}, [p_bgr]! @ store one more pixel
- BEQ end_yyvup2abgr @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST4.U8 {D21[4],D22[4],D23[4],D24[4]}, [p_bgr]! @ store one more pixel
- BEQ end_yyvup2abgr @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST4.U8 {D21[5],D22[5],D23[5],D24[5]}, [p_bgr]! @ store one more pixel
- BEQ end_yyvup2abgr @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST4.U8 {D21[6],D22[6],D23[6],D24[6]}, [p_bgr]! @ store one more pixel
-
-end_yyvup2abgr:
- VPOP {D8-D15}
- LDMFD SP!, {PC}
- @ end of yyvup2abgr
-
-.end
-
diff --git a/libjpegtwrp/asm/armv7/jdcolor-armv7.S b/libjpegtwrp/asm/armv7/jdcolor-armv7.S
deleted file mode 100644
index b2da6d5d0..000000000
--- a/libjpegtwrp/asm/armv7/jdcolor-armv7.S
+++ /dev/null
@@ -1,632 +0,0 @@
-/*------------------------------------------------------------------------
-* jdcolor-armv7.S
-*
-* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions are
-* met:
-* * Redistributions of source code must retain the above copyright
-* notice, this list of conditions and the following disclaimer.
-* * Redistributions in binary form must reproduce the above
-* copyright notice, this list of conditions and the following
-* disclaimer in the documentation and/or other materials provided
-* with the distribution.
-* * Neither the name of Code Aurora Forum, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived
-* from this software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
-* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
-* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
-* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*--------------------------------------------------------------------------
-
-*--------------------------------------------------------------------------
-* FUNCTION LIST
-*--------------------------------------------------------------------------
-*
-* - yvup2bgr888_venum
-* - yyvup2bgr888_venum
-*
-*--------------------------------------------------------------------------
-*/
-
- .section yvu_plain_to_bgr, "x" @ AREA
- .text @ |.text|, CODE, READONLY
- .align 2
- .code 32 @ CODE32
-
-/*-----------------------------------------------------------------------------
- * ARM Registers
- * ---------------------------------------------------------------------------- */
-p_y .req r0
-p_cr .req r1
-p_cb .req r2
-p_rgb .req r3
-p_bgr .req r3
-length .req r12
-
- .global yvup2bgr888_venum
- .global yyvup2bgr888_venum
-
-@ coefficients in color conversion matrix multiplication
-.equ COEFF_Y, 256 @ contribution of Y
-.equ COEFF_V_RED, 359 @ contribution of V for red
-.equ COEFF_U_GREEN, -88 @ contribution of U for green
-.equ COEFF_V_GREEN, -183 @ contribution of V for green
-.equ COEFF_U_BLUE, 454 @ contribution of U for blue
-
-@ Clamping constants 0x0 and 0xFF
-.equ COEFF_0, 0
-.equ COEFF_255, 255
-
-@ Bias coefficients for red, green and blue
-.equ COEFF_BIAS_R, -45824 @ Red bias = -359*128 + 128
-.equ COEFF_BIAS_G, 34816 @ Green bias = (88+183)*128 + 128
-.equ COEFF_BIAS_B, -57984 @ Blue bias = -454*128 + 128
-
-constants:
- .hword (COEFF_V_RED), (COEFF_U_GREEN), (COEFF_V_GREEN), (COEFF_U_BLUE) @ 359 | -88 | -183 | 454
- .hword (COEFF_Y), (COEFF_0), (COEFF_255) , (COEFF_0) @ 256 | 0 | 255 | 0
- .word (COEFF_BIAS_R), (COEFF_BIAS_G), (COEFF_BIAS_B) @ -45824 | 34816 | -57984 | X
-
-/*--------------------------------------------------------------------------
-* FUNCTION : yvup2bgr888_venum
-*--------------------------------------------------------------------------
-* DESCRIPTION : Perform YVU planar to BGR888 conversion.
-*--------------------------------------------------------------------------
-* C PROTOTYPE : void yvup2bgr888_venum(uint8_t *p_y,
-* uint8_t *p_cr,
-* uint8_t *p_cb,
-* uint8_t *p_bgr888,
-* uint32_t length)
-*--------------------------------------------------------------------------
-* REG INPUT : R0: uint8_t *p_y
-* pointer to the input Y Line
-* R1: uint8_t *p_cr
-* pointer to the input Cr Line
-* R2: uint8_t *p_cb
-* pointer to the input Cb Line
-* R3: uint8_t *p_bgr888
-* pointer to the output BGR Line
-* R12: uint32_t length
-* width of Line
-*--------------------------------------------------------------------------
-* STACK ARG : None
-*--------------------------------------------------------------------------
-* REG OUTPUT : None
-*--------------------------------------------------------------------------
-* MEM INPUT : p_y - a line of Y pixels
-* p_cr - a line of Cr pixels
-* p_cb - a line of Cb pixels
-* length - the width of the input line
-*--------------------------------------------------------------------------
-* MEM OUTPUT : p_bgr888 - the converted bgr pixels
-*--------------------------------------------------------------------------
-* REG AFFECTED : ARM: R0-R4, R12
-* NEON: Q0-Q15
-*--------------------------------------------------------------------------
-* STACK USAGE : none
-*--------------------------------------------------------------------------
-* CYCLES : none
-*
-*--------------------------------------------------------------------------
-* NOTES :
-*--------------------------------------------------------------------------
-*/
-.type yvup2bgr888_venum, %function
-yvup2bgr888_venum:
-
- /*-------------------------------------------------------------------------
- * Store stack registers
- * ------------------------------------------------------------------------ */
- STMFD SP!, {LR}
-
- VPUSH {D8-D15}
-
- PLD [R0, R3] @ preload luma line
-
- ADR R12, constants
-
- VLD1.S16 {D6, D7}, [R12]! @ D6, D7: 359 | -88 | -183 | 454 | 256 | 0 | 255 | 0
- VLD1.S32 {D30, D31}, [R12] @ Q15 : -45824 | 34816 | -57984 | X
-
- /*-------------------------------------------------------------------------
- * Load the 5th parameter via stack
- * R0 ~ R3 are used to pass the first 4 parameters, the 5th and above
- * parameters are passed via stack
- * ------------------------------------------------------------------------ */
- LDR R12, [SP, #68] @ LR is pushed into the stack so SP is
- @ decreased by 4,
- @ D8-D15 are also pushed into the stack
- @ so SP is decreased by
- @ 8-byte/D-Register * 8 D-Registers = 64,
- @ so SP needs to be increased by 64+4=68
- @ to get the value that was first pushed
- @ into stack (the 5th parameter passed in
- @ throught stack)
-
- /*-------------------------------------------------------------------------
- * Load clamping parameters to duplicate vector elements
- * ------------------------------------------------------------------------ */
- VDUP.S16 Q4, D7[1] @ Q4: 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0
- VDUP.S16 Q5, D7[2] @ Q5: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255
-
- /*-------------------------------------------------------------------------
- * Read bias
- * ------------------------------------------------------------------------ */
- VDUP.S32 Q0, D30[0] @ Q0: -45824 | -45824 | -45824 | -45824
- VDUP.S32 Q1, D30[1] @ Q1: 34816 | 34816 | 34816 | 34816
- VDUP.S32 Q2, D31[0] @ Q2: -57984 | -57984 | -57984 | -57984
-
-
- /*-------------------------------------------------------------------------
- * The main loop
- * ------------------------------------------------------------------------ */
-loop_yvup2bgr888:
-
- /*-------------------------------------------------------------------------
- * Load input from Y, V and U
- * D12 : Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7
- * D14 : V0 V1 V2 V3 V4 V5 V6 V7
- * D15 : U0 U1 U2 U3 U4 U5 U6 U7
- * ------------------------------------------------------------------------ */
- VLD1.U8 {D12}, [p_y]! @ Load 8 Luma elements (uint8) to D12
- VLD1.U8 {D14}, [p_cr]! @ Load 8 Cr elements (uint8) to D14
- VLD1.U8 {D15}, [p_cb]! @ Load 8 Cb elements (uint8) to D15
-
- /*-------------------------------------------------------------------------
- * Expand uint8 value to uint16
- * D18, D19: Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7
- * D20, D21: V0 V1 V2 V3 V4 V5 V6 V7
- * D22, D23: U0 U1 U2 U3 U4 U5 U6 U7
- * ------------------------------------------------------------------------ */
- VMOVL.U8 Q9, D12
- VMOVL.U8 Q10, D14
- VMOVL.U8 Q11, D15
-
- /*-------------------------------------------------------------------------
- * Multiply contribution from chrominance, results are in 32-bit
- * ------------------------------------------------------------------------ */
- VMULL.S16 Q12, D20, D6[0] @ Q12: 359*(V0,V1,V2,V3) Red
- VMULL.S16 Q13, D22, D6[1] @ Q13: -88*(U0,U1,U2,U3) Green
- VMLAL.S16 Q13, D20, D6[2] @ Q13: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3)
- VMULL.S16 Q14, D22, D6[3] @ Q14: 454*(U0,U1,U2,U3) Blue
-
- /*-------------------------------------------------------------------------
- * Add bias
- * ------------------------------------------------------------------------ */
- VADD.S32 Q12, Q0 @ Q12 add Red bias -45824
- VADD.S32 Q13, Q1 @ Q13 add Green bias 34816
- VADD.S32 Q14, Q2 @ Q14 add Blue bias -57984
-
- /*-------------------------------------------------------------------------
- * Calculate Red, Green, Blue
- * ------------------------------------------------------------------------ */
- VMLAL.S16 Q12, D18, D7[0] @ Q12: R0, R1, R2, R3 in 32-bit Q8 format
- VMLAL.S16 Q13, D18, D7[0] @ Q13: G0, G1, G2, G3 in 32-bit Q8 format
- VMLAL.S16 Q14, D18, D7[0] @ Q14: B0, B1, B2, B3 in 32-bit Q8 format
-
- /*-------------------------------------------------------------------------
- * Right shift eight bits with rounding
- * ------------------------------------------------------------------------ */
- VSHRN.S32 D18 , Q12, #8 @ D18: R0, R1, R2, R3 in 16-bit Q0 format
- VSHRN.S32 D20 , Q13, #8 @ D20: G0, G1, G2, G3 in 16-bit Q0 format
- VSHRN.S32 D22, Q14, #8 @ D22: B0, B1, B2, B3 in 16-bit Q0 format
-
- /*-------------------------------------------------------------------------
- * Done with the first 4 elements, continue on the next 4 elements
- * ------------------------------------------------------------------------ */
-
- /*-------------------------------------------------------------------------
- * Multiply contribution from chrominance, results are in 32-bit
- * ------------------------------------------------------------------------ */
- VMULL.S16 Q12, D21, D6[0] @ Q12: 359*(V0,V1,V2,V3) Red
- VMULL.S16 Q13, D23, D6[1] @ Q13: -88*(U0,U1,U2,U3) Green
- VMLAL.S16 Q13, D21, D6[2] @ Q13: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3)
- VMULL.S16 Q14, D23, D6[3] @ Q14: 454*(U0,U1,U2,U3) Blue
-
- /*-------------------------------------------------------------------------
- * Add bias
- * ------------------------------------------------------------------------ */
- VADD.S32 Q12, Q0 @ Q12 add Red bias -45824
- VADD.S32 Q13, Q1 @ Q13 add Green bias 34816
- VADD.S32 Q14, Q2 @ Q14 add Blue bias -57984
-
- /*-------------------------------------------------------------------------
- * Calculate Red, Green, Blue
- * ------------------------------------------------------------------------ */
- VMLAL.S16 Q12, D19, D7[0] @ Q12: R0, R1, R2, R3 in 32-bit Q8 format
- VMLAL.S16 Q13, D19, D7[0] @ Q13: G0, G1, G2, G3 in 32-bit Q8 format
- VMLAL.S16 Q14, D19, D7[0] @ Q14: B0, B1, B2, B3 in 32-bit Q8 format
-
- /*-------------------------------------------------------------------------
- * Right shift eight bits with rounding
- * ------------------------------------------------------------------------ */
- VSHRN.S32 D19 , Q12, #8 @ D18: R0, R1, R2, R3 in 16-bit Q0 format
- VSHRN.S32 D21 , Q13, #8 @ D20: G0, G1, G2, G3 in 16-bit Q0 format
- VSHRN.S32 D23, Q14, #8 @ D22: B0, B1, B2, B3 in 16-bit Q0 format
-
- /*-------------------------------------------------------------------------
- * Clamp the value to be within [0~255]
- * ------------------------------------------------------------------------ */
- VMAX.S16 Q11, Q11, Q4 @ if Q11 < 0, Q11 = 0
- VMIN.S16 Q11, Q11, Q5 @ if Q11 > 255, Q11 = 255
- VQMOVUN.S16 D28, Q11 @ store Blue to D28, narrow the value from int16 to int8
-
- VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0
- VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255
- VQMOVUN.S16 D27, Q10 @ store Green to D27, narrow the value from int16 to int8
-
- VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0
- VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255
- VQMOVUN.S16 D26, Q9 @ store Red to D26, narrow the value from int16 to int8.
-
- SUBS length, length, #8 @ check if the length is less than 8
-
- BMI trailing_yvup2bgr888 @ jump to trailing processing if remaining length is less than 8
-
- VST3.U8 {D26,D27,D28}, [p_bgr]! @ vector store Red, Green, Blue to destination
- @ Blue at LSB
-
- BHI loop_yvup2bgr888 @ loop if more than 8 pixels left
-
- BEQ end_yvup2bgr888 @ done if exactly 8 pixel processed in the loop
-
-
-trailing_yvup2bgr888:
- /*-------------------------------------------------------------------------
- * There are from 1 ~ 7 pixels left in the trailing part.
- * First adding 7 to the length so the length would be from 0 ~ 6.
- * eg: 1 pixel left in the trailing part, so 1-8+7 = 0.
- * Then save 1 pixel unconditionally since at least 1 pixels left in the
- * trailing part.
- * ------------------------------------------------------------------------ */
- ADDS length, length, #7 @ there are 7 or less in the trailing part
-
- VST3.U8 {D26[0], D27[0], D28[0]}, [p_bgr]! @ at least 1 pixel left in the trailing part
- BEQ end_yvup2bgr888 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST3.U8 {D26[1], D27[1], D28[1]}, [p_bgr]! @ store one more pixel
- BEQ end_yvup2bgr888 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST3.U8 {D26[2], D27[2], D28[2]}, [p_bgr]! @ store one more pixel
- BEQ end_yvup2bgr888 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST3.U8 {D26[3], D27[3], D28[3]}, [p_bgr]! @ store one more pixel
- BEQ end_yvup2bgr888 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST3.U8 {D26[4], D27[4], D28[4]}, [p_bgr]! @ store one more pixel
- BEQ end_yvup2bgr888 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST3.U8 {D26[5], D27[5], D28[5]}, [p_bgr]! @ store one more pixel
- BEQ end_yvup2bgr888 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST3.U8 {D26[6], D27[6], D28[6]}, [p_bgr]! @ store one more pixel
-
-end_yvup2bgr888:
- VPOP {D8-D15}
- LDMFD SP!, {PC}
-
- @ end of yvup2bgr888
-
-
-/*-------------------------------------------------------------------------
-* FUNCTION : yyvup2bgr888_venum
-*--------------------------------------------------------------------------
-* DESCRIPTION : Perform YYVU planar to BGR888 conversion.
-*--------------------------------------------------------------------------
-* C PROTOTYPE : void yyvup2bgr888_venum(uint8_t *p_y,
-* uint8_t *p_cr,
-* uint8_t *p_cb,
-* uint8_t *p_bgr888,
-* uint32_t length)
-*--------------------------------------------------------------------------
-* REG INPUT : R0: uint8_t *p_y
-* pointer to the input Y Line
-* R1: uint8_t *p_cr
-* pointer to the input Cr Line
-* R2: uint8_t *p_cb
-* pointer to the input Cb Line
-* R3: uint8_t *p_bgr888
-* pointer to the output BGR Line
-* R12: uint32_t length
-* width of Line
-*--------------------------------------------------------------------------
-* STACK ARG : None
-*--------------------------------------------------------------------------
-* REG OUTPUT : None
-*--------------------------------------------------------------------------
-* MEM INPUT : p_y - a line of Y pixels
-* p_cr - a line of Cr pixels
-* p_cb - a line of Cb pixels
-* length - the width of the input line
-*--------------------------------------------------------------------------
-* MEM OUTPUT : p_bgr888 - the converted bgr pixels
-*--------------------------------------------------------------------------
-* REG AFFECTED : ARM: R0-R4, R12
-* NEON: Q0-Q15
-*--------------------------------------------------------------------------
-* STACK USAGE : none
-*--------------------------------------------------------------------------
-* CYCLES : none
-*
-*--------------------------------------------------------------------------
-* NOTES :
-*--------------------------------------------------------------------------
-*/
-.type yyvup2bgr888_venum, %function
-yyvup2bgr888_venum:
- /*-------------------------------------------------------------------------
- * Store stack registers
- * ------------------------------------------------------------------------ */
- STMFD SP!, {LR}
-
- VPUSH {D8-D15}
-
- PLD [R0, R3] @ preload luma line
-
- ADR R12, constants
-
- VLD1.S16 {D6, D7}, [R12]! @ D6, D7: 359 | -88 | -183 | 454 | 256 | 0 | 255 | 0
- VLD1.S32 {D30, D31}, [R12] @ Q15 : -45824 | 34816 | -57984 | X
-
- /*-------------------------------------------------------------------------
- * Load the 5th parameter via stack
- * R0 ~ R3 are used to pass the first 4 parameters, the 5th and above
- * parameters are passed via stack
- * ------------------------------------------------------------------------ */
- LDR R12, [SP, #68] @ LR is pushed into the stack so SP is
- @ decreased by 4,
- @ D8-D15 are also pushed into the stack
- @ so SP is decreased by
- @ 8-byte/D-Register * 8 D-Registers = 64,
- @ so SP needs to be increased by 64+4=68
- @ to get the value that was first pushed
- @ into stack (the 5th parameter passed in
- @ throught stack)
-
- /*-------------------------------------------------------------------------
- * Load clamping parameters to duplicate vector elements
- * ------------------------------------------------------------------------ */
- VDUP.S16 Q4, D7[1] @ Q4: 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0
- VDUP.S16 Q5, D7[2] @ Q5: 255 | 255 | 255 | 255 | 255 | 255 | 255 | 255
-
- /*-------------------------------------------------------------------------
- * Read bias
- * ------------------------------------------------------------------------ */
- VDUP.S32 Q0, D30[0] @ Q0: -45824 | -45824 | -45824 | -45824
- VDUP.S32 Q1, D30[1] @ Q1: 34816 | 34816 | 34816 | 34816
- VDUP.S32 Q2, D31[0] @ Q2: -70688 | -70688 | -70688 | -70688
-
-
- /*-------------------------------------------------------------------------
- * The main loop
- * ------------------------------------------------------------------------ */
-loop_yyvup2bgr888:
-
- /*-------------------------------------------------------------------------
- * Load input from Y, V and U
- * D12, D13: Y0 Y2 Y4 Y6 Y8 Y10 Y12 Y14, Y1 Y3 Y5 Y7 Y9 Y11 Y13 Y15
- * D14 : V0 V1 V2 V3 V4 V5 V6 V7
- * D15 : U0 U1 U2 U3 U4 U5 U6 U7
- * ------------------------------------------------------------------------ */
- VLD2.U8 {D12,D13}, [p_y]! @ Load 16 Luma elements (uint8) to D12, D13
- VLD1.U8 {D14}, [p_cr]! @ Load 8 Cr elements (uint8) to D14
- VLD1.U8 {D15}, [p_cb]! @ Load 8 Cb elements (uint8) to D15
-
- /*-------------------------------------------------------------------------
- * Expand uint8 value to uint16
- * D24, D25: Y0 Y2 Y4 Y6 Y8 Y10 Y12 Y14
- * D26, D27: Y1 Y3 Y5 Y7 Y9 Y11 Y13 Y15
- * D28, D29: V0 V1 V2 V3 V4 V5 V6 V7
- * D30, D31: U0 U1 U2 U3 U4 U5 U6 U7
- * ------------------------------------------------------------------------ */
- VMOVL.U8 Q12, D12
- VMOVL.U8 Q13, D13
- VMOVL.U8 Q14, D14
- VMOVL.U8 Q15, D15
-
- /*-------------------------------------------------------------------------
- * Multiply contribution from chrominance, results are in 32-bit
- * ------------------------------------------------------------------------ */
- VMULL.S16 Q6, D28, D6[0] @ Q6: 359*(V0,V1,V2,V3) Red
- VMULL.S16 Q7, D30, D6[1] @ Q7: -88*(U0,U1,U2,U3) Green
- VMLAL.S16 Q7, D28, D6[2] @ q7: -88*(U0,U1,U2,U3) - 183*(V0,V1,V2,V3)
- VMULL.S16 Q8, D30, D6[3] @ q8: 454*(U0,U1,U2,U3) Blue
-
- /*-------------------------------------------------------------------------
- * Add bias
- * ------------------------------------------------------------------------ */
- VADD.S32 Q6, Q0 @ Q6 add Red bias -45824
- VADD.S32 Q7, Q1 @ Q7 add Green bias 34816
- VADD.S32 Q8, Q2 @ Q8 add Blue bias -57984
-
- /*-------------------------------------------------------------------------
- * Calculate Red, Green, Blue
- * ------------------------------------------------------------------------ */
- VMOV.S32 Q9, Q6
- VMLAL.S16 Q6, D24, D7[0] @ Q6: R0, R2, R4, R6 in 32-bit Q8 format
- VMLAL.S16 Q9, D26, D7[0] @ Q9: R1, R3, R5, R7 in 32-bit Q8 format
-
- VMOV.S32 Q10, Q7
- VMLAL.S16 Q7, D24, D7[0] @ Q7: G0, G2, G4, G6 in 32-bit Q8 format
- VMLAL.S16 Q10, D26, D7[0] @ Q10: G1, G3, G5, G7 in 32-bit Q8 format
-
- VMOV.S32 Q11, Q8
- VMLAL.S16 Q8, D24, D7[0] @ Q8: B0, B2, B4, B6 in 32-bit Q8 format
- VMLAL.S16 Q11, D26, D7[0] @ Q11: B1, B3, B5, B7 in 32-bit Q8 format
-
- /*-------------------------------------------------------------------------
- * Right shift eight bits with rounding
- * ------------------------------------------------------------------------ */
- VSHRN.S32 D12, Q6, #8 @ D12: R0 R2 R4 R6 in 16-bit Q0 format
- VSHRN.S32 D13, Q9, #8 @ D13: R1 R3 R5 R7 in 16-bit Q0 format
- VZIP.16 D12, D13 @ Q6 : R0 R1 R2 R3 R4 R5 R6 R7
-
- VSHRN.S32 D18, Q7, #8 @ D18: G0 G2 G4 G6 in 16-bit Q0 format
- VSHRN.S32 D19, Q10, #8 @ D19: G1 G3 G5 G7 in 16-bit Q0 format
- VZIP.16 D18, D19 @ Q9 : G0 G1 G2 G3 G4 G5 G6 G7
-
- VSHRN.S32 D20, Q8, #8 @ D20: B0 B2 B4 B6 in 16-bit Q0 format
- VSHRN.S32 D21, Q11, #8 @ D21: B1 B3 B5 B7 in 16-bit Q0 format
- VZIP.16 D20, D21 @ Q10: B0 B1 B2 B3 B4 B5 B6 B7
-
- /*-------------------------------------------------------------------------
- * Clamp the value to be within [0~255]
- * ------------------------------------------------------------------------ */
- VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0
- VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255
- VQMOVUN.S16 D23, Q10 @ store Blue to D23, narrow the value from int16 to int8
-
- VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0
- VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255
- VQMOVUN.S16 D22, Q9 @ store Green to D22, narrow the value from int16 to int8
-
- VMAX.S16 Q6, Q6, Q4 @ if Q6 < 0, Q6 = 0
- VMIN.S16 Q6, Q6, Q5 @ if Q6 > 255, Q6 = 255
- VQMOVUN.S16 D21, Q6 @ store Red to D21, narrow the value from int16 to int8
-
- SUBS length, length, #8 @ check if the length is less than 8
-
- BMI trailing_yyvup2bgr888 @ jump to trailing processing if remaining length is less than 8
-
- VST3.U8 {D21,D22,D23}, [p_bgr]! @ vector store Blue, Green, Red to destination
- @ Red at LSB
-
- BEQ end_yyvup2bgr888 @ done if exactly 8 pixel processed in the loop
-
- /*-------------------------------------------------------------------------
- * Done with the first 8 elements, continue on the next 8 elements
- * ------------------------------------------------------------------------ */
-
- /*-------------------------------------------------------------------------
- * Multiply contribution from chrominance, results are in 32-bit
- * ------------------------------------------------------------------------ */
- VMULL.S16 Q6, D29, D6[0] @ Q6: 359*(V4,V5,V6,V7) Red
- VMULL.S16 Q7, D31, D6[1] @ Q7: -88*(U4,U5,U6,U7) Green
- VMLAL.S16 Q7, D29, D6[2] @ Q7: -88*(U4,U5,U6,U7) - 183*(V4,V5,V6,V7)
- VMULL.S16 Q8, D31, D6[3] @ Q8: 454*(U4,U5,U6,U7) Blue
-
- /*-------------------------------------------------------------------------
- * Add bias
- * ------------------------------------------------------------------------ */
- VADD.S32 Q6, Q0 @ Q6 add Red bias -45824
- VADD.S32 Q7, Q1 @ Q7 add Green bias 34816
- VADD.S32 Q8, Q2 @ Q8 add Blue bias -70688
-
- /*-------------------------------------------------------------------------
- * Calculate Red, Green, Blue
- * ------------------------------------------------------------------------ */
- VMOV.S32 Q9, Q6
- VMLAL.S16 Q6, D25, D7[0] @ Q6: R8 R10 R12 R14 in 32-bit Q8 format
- VMLAL.S16 Q9, D27, D7[0] @ Q9: R9 R11 R13 R15 in 32-bit Q8 format
-
- VMOV.S32 Q10, Q7
- VMLAL.S16 Q7, D25, D7[0] @ Q7: G0, G2, G4, G6 in 32-bit Q8 format
- VMLAL.S16 Q10, D27, D7[0] @ Q10 : G1, G3, G5, G7 in 32-bit Q8 format
-
- VMOV.S32 Q11, Q8
- VMLAL.S16 Q8, D25, D7[0] @ Q8: B0, B2, B4, B6 in 32-bit Q8 format
- VMLAL.S16 Q11, D27, D7[0] @ Q11 : B1, B3, B5, B7 in 32-bit Q8 format
-
- /*-------------------------------------------------------------------------
- * Right shift eight bits with rounding
- * ------------------------------------------------------------------------ */
- VSHRN.S32 D12, Q6, #8 @ D12: R8 R10 R12 R14 in 16-bit Q0 format
- VSHRN.S32 D13, Q9, #8 @ D13: R9 R11 R13 R15 in 16-bit Q0 format
- VZIP.16 D12, D13 @ Q6: R8 R9 R10 R11 R12 R13 R14 R15
-
- VSHRN.S32 D18, Q7, #8 @ D18: G8 G10 G12 G14 in 16-bit Q0 format
- VSHRN.S32 D19, Q10, #8 @ D19: G9 G11 G13 G15 in 16-bit Q0 format
- VZIP.16 D18, D19 @ Q9: G8 G9 G10 G11 G12 G13 G14 G15
-
- VSHRN.S32 D20, Q8, #8 @ D20: B8 B10 B12 B14 in 16-bit Q0 format
- VSHRN.S32 D21, Q11, #8 @ D21: B9 B11 B13 B15 in 16-bit Q0 format
- VZIP.16 D20, D21 @ Q10: B8 B9 B10 B11 B12 B13 B14 B15
-
- /*-------------------------------------------------------------------------
- * Clamp the value to be within [0~255]
- * ------------------------------------------------------------------------ */
- VMAX.S16 Q10, Q10, Q4 @ if Q10 < 0, Q10 = 0
- VMIN.S16 Q10, Q10, Q5 @ if Q10 > 255, Q10 = 255
- VQMOVUN.S16 D23, Q10 @ store Blue to D23, narrow the value from int16 to int8
-
- VMAX.S16 Q9, Q9, Q4 @ if Q9 < 0, Q9 = 0
- VMIN.S16 Q9, Q9, Q5 @ if Q9 > 255, Q9 = 255
- VQMOVUN.S16 D22, Q9 @ store Green to D22, narrow the value from int16 to int8
-
- VMAX.S16 Q6, Q6, Q4 @ if Q6 < 0, Q6 = 0
- VMIN.S16 Q6, Q6, Q5 @ if Q6 > 255, Q6 = 255
- VQMOVUN.S16 D21, Q6 @ store Red to D21, narrow the value from int16 to int8
-
-
- SUBS length, length, #8 @ check if the length is less than 8
-
- BMI trailing_yyvup2bgr888 @ jump to trailing processing if remaining length is less than 8
-
- VST3.U8 {D21,D22,D23}, [p_bgr]! @ vector store Blue, Green, Red to destination
- @ Red at LSB
-
- BHI loop_yyvup2bgr888 @ loop if more than 8 pixels left
-
- BEQ end_yyvup2bgr888 @ done if exactly 8 pixel processed in the loop
-
-
-trailing_yyvup2bgr888:
- /*-------------------------------------------------------------------------
- * There are from 1 ~ 7 pixels left in the trailing part.
- * First adding 7 to the length so the length would be from 0 ~ 6.
- * eg: 1 pixel left in the trailing part, so 1-8+7 = 0.
- * Then save 1 pixel unconditionally since at least 1 pixels left in the
- * trailing part.
- * ------------------------------------------------------------------------ */
- ADDS length, length, #7 @ there are 7 or less in the trailing part
-
- VST3.U8 {D21[0],D22[0],D23[0]}, [p_bgr]! @ at least 1 pixel left in the trailing part
- BEQ end_yyvup2bgr888 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST3.U8 {D21[1],D22[1],D23[1]}, [p_bgr]! @ store one more pixel
- BEQ end_yyvup2bgr888 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST3.U8 {D21[2],D22[2],D23[2]}, [p_bgr]! @ store one more pixel
- BEQ end_yyvup2bgr888 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST3.U8 {D21[3],D22[3],D23[3]}, [p_bgr]! @ store one more pixel
- BEQ end_yyvup2bgr888 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST3.U8 {D21[4],D22[4],D23[4]}, [p_bgr]! @ store one more pixel
- BEQ end_yyvup2bgr888 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST3.U8 {D21[5],D22[5],D23[5]}, [p_bgr]! @ store one more pixel
- BEQ end_yyvup2bgr888 @ done if 0 pixel left
-
- SUBS length, length, #1 @ update length counter
- VST3.U8 {D21[6],D22[6],D23[6]}, [p_bgr]! @ store one more pixel
-
-end_yyvup2bgr888:
- VPOP {D8-D15}
- LDMFD SP!, {PC}
-
- @ end of yyvup2bgr888
-
-.end
diff --git a/libjpegtwrp/asm/armv7/jdidct-armv7.S b/libjpegtwrp/asm/armv7/jdidct-armv7.S
deleted file mode 100644
index d61e219f7..000000000
--- a/libjpegtwrp/asm/armv7/jdidct-armv7.S
+++ /dev/null
@@ -1,762 +0,0 @@
-/*=========================================================================
-* jdidct-armv7.s
-*
-* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions are
-* met:
-* * Redistributions of source code must retain the above copyright
-* notice, this list of conditions and the following disclaimer.
-* * Redistributions in binary form must reproduce the above
-* copyright notice, this list of conditions and the following
-* disclaimer in the documentation and/or other materials provided
-* with the distribution.
-* * Neither the name of Code Aurora Forum, Inc. nor the names of its
-* contributors may be used to endorse or promote products derived
-* from this software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
-* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
-* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
-* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*==========================================================================
-
-*==========================================================================
-* FUNCTION LIST
-*--------------------------------------------------------------------------
-* - idct_1x1_venum
-* - idct_2x2_venum
-* - idct_4x4_venum
-* - idct_8x8_venum
-*
-*==========================================================================
-*/
-
-@==========================================================================
-@ MACRO DEFINITION
-@==========================================================================
- .macro Transpose8x8
- @==================================================================
- @ Transpose an 8 x 8 x 16 bit matrix in place
- @ Input: q8 to q15
- @ Output: q8 to q15
- @ Registers used: q8 to q15
- @ Assumptions: 8 x 8 x 16 bit data
- @==================================================================
-
- vswp d17, d24 @q8, q12
- vswp d23, d30 @q11, q15
- vswp d21, d28 @q10, q14
- vswp d19, d26 @q9, q13
-
- vtrn.32 q8, q10
- vtrn.32 q9, q11
- vtrn.32 q12, q14
- vtrn.32 q13, q15
-
- vtrn.16 q8, q9
- vtrn.16 q10, q11
- vtrn.16 q12, q13
- vtrn.16 q14, q15
- .endm
-
- .macro IDCT1D
- @==================================================================
- @ One dimensional 64 element inverse DCT
- @ Input: q8 to q15 loaded with data
- @ q0 loaded with constants
- @ Output: q8 to q15
- @ Registers used: q0, q4 to q15
- @ Assumptions: 16 bit data, first elements in least significant
- @ halfwords
- @==================================================================
-
- @1st stage
- vqrdmulh.s16 q4, q15, d0[2] @q4 = a1*vx7
- vqrdmulh.s16 q5, q9, d0[2] @q5 = a1*vx1
- vqrdmulh.s16 q6, q13, d0[3] @q6 = a2*vx5
- vqrdmulh.s16 q7, q11, d1[1] @q7 = ma2*vx3
- vqrdmulh.s16 q2, q14, d0[1] @q6 = a0*vx6
- vqrdmulh.s16 q3, q10, d0[1] @q7 = a0*vx2
- vqadd.s16 q9, q4, q9 @q9 = t1 = a1*vx7 + vx1
- vqsub.s16 q5, q5, q15 @q5 = t8 = a1*vx1 - vx7
- vqadd.s16 q15, q6, q11 @q15 = t7 = a2*vx5 + vx3
- vqadd.s16 q11, q7, q13 @q11 = t3 = ma2*vx3 + vx5
-
- @2nd stage
- vqadd.s16 q13, q8, q12 @q13 = t5 = vx0 + vx4
- vqsub.s16 q8, q8, q12 @q8 = t0 = vx0 - vx4
- vqadd.s16 q10, q2, q10 @q10 = t2 = a0*vx6 + vx2
- vqsub.s16 q12, q3, q14 @q12 = t4 = a0*vx2 - vx6
- vqadd.s16 q14, q5, q11 @q14 = t6 = t8 + t3
- vqsub.s16 q11, q5, q11 @q11 = t3 = t8 - t3
- vqsub.s16 q5, q9, q15 @q5 = t8 = t1 - t7
- vqadd.s16 q9, q9, q15 @q9 = t1 = t1 + t7
-
- @3rd stage
- vqadd.s16 q15, q13, q10 @q15 = t7 = t5 + t2
- vqsub.s16 q10, q13, q10 @q10 = t2 = t5 - t2
- vqadd.s16 q13, q8, q12 @q13 = t5 = t0 + t4
- vqsub.s16 q7, q8, q12 @q7 = t0 = t0 - t4
- vqsub.s16 q12, q5, q11 @q12 = t4 = t8 - t3
- vqadd.s16 q11, q5, q11 @q11 = t3 = t8 + t3
-
- @4th stage
- vqadd.s16 q8, q15, q9 @q8 = vy0 = t7 + t1
- vqsub.s16 q15, q15, q9 @q15 = vy7 = t7 - t1
- vqrdmulh.s16 q6, q12, d0[0] @q6 = c4*t4
- vqrdmulh.s16 q4, q11, d0[0] @q4 = c4*t3
- vqsub.s16 q12, q10, q14 @q12 = vy4 = t2 - t6
- vqadd.s16 q11, q10, q14 @q11 = vy3 = t2 + t6
- vqadd.s16 q10, q7, q6 @q10 = vy2 = t0 + c4*t4
- vqsub.s16 q14, q13, q4 @q14 = vy6 = t5 - c4*t3
- vqadd.s16 q9, q13, q4 @q9 = vy1 = t5 + c4*t3
- vqsub.s16 q13, q7, q6 @q13 = vy5 = t0 - c4*t4
- .endm
-
- .macro PART1
- @==================================================================
- @ Load input input data from memory and shift
- @==================================================================
- vld1.16 {d16, d17},[r0]! @q8 =row0
- vqshl.s16 q8, q8, #4 @Input data too big?!!
- @Maximum MPEG input is 2047/-2048.
- vld1.16 {d18, d19},[r0]! @q9 =row1
- vqshl.s16 q9, q9, #4 @Shift 1 instead of 4
-
- vld1.16 {d20, d21},[r0]! @q10=row2
- vqshl.s16 q10, q10, #4
-
- vld1.16 {d22, d23},[r0]! @q11=row3
- vqshl.s16 q11, q11, #4
-
- vld1.16 {d24, d25},[r0]! @q12=row4
- vqshl.s16 q12, q12, #4
-
- vld1.16 {d26, d27},[r0]! @q13=row5
- vqshl.s16 q13, q13, #4
- vld1.16 {d28, d29},[r0]! @q14=row6
- vqshl.s16 q14, q14, #4
- vld1.16 {d30, d31},[r0]! @q15=row7
- vqshl.s16 q15, q15, #4
-
- @==================================================================
- @ refresh the constants that was clobbered last time through IDCT1D
- @==================================================================
- vld1.16 {d4, d5},[r7] @q2 =constants[2]
- vld1.16 {d6, d7},[r8] @q3 =constants[3]
- vld1.16 {d8, d9},[r9] @q4 =constants[4]
- .endm
-
- .macro PART2
- @==================================================================
- @ Prescale the input
- @==================================================================
- vqrdmulh.s16 q12, q12, q1 @q12=row4 * constants[1] = vx4
- vqrdmulh.s16 q15, q15, q2 @q15=row7 * constants[2] = vx7
- vqrdmulh.s16 q9, q9, q2 @q9 =row1 * constants[2] = vx1
- vqrdmulh.s16 q13, q13, q4 @q13=row5 * constants[4] = vx5
- vqrdmulh.s16 q11, q11, q4 @q11=row3 * constants[4] = vx3
- vqrdmulh.s16 q14, q14, q3 @q14=row6 * constants[3] = vx6
- vqrdmulh.s16 q10, q10, q3 @q10=row2 * constants[3] = vx2
- vqrdmulh.s16 q8, q8, q1 @q8 =row0 * constants[1] = vx0
-
- @==================================================================
- @ At thsi point, the input 8x8 x 16 bit coefficients are
- @ transposed, prescaled, and loaded in q8 to q15
- @ q0 loaded with scalar constants
- @ Perform 1D IDCT
- @==================================================================
- IDCT1D @perform 1d idct
-
- @==================================================================
- @ Transpose the intermediate results to get read for vertical
- @ transformation
- @==================================================================
- vswp d17, d24 @q8, q12
- vswp d23, d30 @q11, q15
- vswp d21, d28 @q10, q14
- vswp d19, d26 @q9, q13
-
- @==================================================================
- @ Load the bias
- @==================================================================
- vdup.32 q4, d1[1] @a cycle is saved by loading
- @the bias at this point
-
- @==================================================================
- @ Finish the transposition
- @==================================================================
- vtrn.32 q8, q10
- vtrn.32 q9, q11
- vtrn.32 q12, q14
- vtrn.32 q13, q15
- vtrn.16 q8, q9
- vtrn.16 q10, q11
- vtrn.16 q12, q13
- vtrn.16 q14, q15
-
- @==================================================================
- @ Add bias
- @==================================================================
- vqadd.s16 q8, q8, q4
-
- @==================================================================
- @ IDCT 2nd half
- @==================================================================
- IDCT1D @perform 1d dct
-
- @==================================================================
- @ Scale and clamp the output to correct range and save to memory
- @ 1. scale to 8bits by right shift 6
- @ 2. clamp output to [0, 255] by min/max
- @ 3. use multiple store. Each store will save one row of output.
- @ The st queue size is 4, so do no more than 4 str in sequence.
- @==================================================================
- ldr r5, =constants+5*16 @constants[5],
- vld1.16 d10, [r5] @load clamping parameters
- vdup.s16 q6, d10[0] @q6=[0000000000000000]
- vdup.s16 q7, d10[1] @q7=[FFFFFFFFFFFFFFFF]
-
- @Save the results
- vshr.s16 q8, q8, #6 @q8 = vy0
- vmax.s16 q8, q8, q6 @clamp >0
- vmin.s16 q8, q8, q7 @clamp <255
-
- vshr.s16 q9, q9, #6 @q9 = vy1
- vmax.s16 q9, q9, q6 @clamp >0
- vmin.s16 q9, q9, q7 @clamp <255
-
- vshr.s16 q10, q10, #6 @q10 = vy2
- vmax.s16 q10, q10, q6 @clamp >0
- vmin.s16 q10, q10, q7 @clamp <255
-
- vshr.s16 q11, q11, #6 @q11 = vy3
- vmax.s16 q11, q11, q6 @clamp >0
- vmin.s16 q11, q11, q7 @clamp <255
-
- vst1.16 {d16, d17},[r1],r2 @q8 =row0
- vst1.16 {d18, d19},[r1],r2 @q9 =row1
- vst1.16 {d20, d21},[r1],r2 @q10=row2
- vst1.16 {d22, d23},[r1],r2 @q11=row3
-
- vshr.s16 q12, q12, #6 @q12 = vy4
- vmax.s16 q12, q12, q6 @clamp >0
- vmin.s16 q12, q12, q7 @clamp <255
-
- vshr.s16 q13, q13, #6 @q13 = vy5
- vmax.s16 q13, q13, q6 @clamp >0
- vmin.s16 q13, q13, q7 @clamp <255
-
- vshr.s16 q14, q14, #6 @q14 = vy6
- vmax.s16 q14, q14, q6 @clamp >0
- vmin.s16 q14, q14, q7 @clamp <255
-
- vshr.s16 q15, q15, #6 @q15 = vy7
- vmax.s16 q15, q15, q6 @clamp >0
- vmin.s16 q15, q15, q7 @clamp <255
-
- vst1.16 {d24, d25},[r1],r2 @q12=row4
- vst1.16 {d26, d27},[r1],r2 @q13=row5
- vst1.16 {d28, d29},[r1],r2 @q14=row6
- vst1.16 {d30, d31},[r1] @q15=row7
- .endm
-
- .macro BIG_BODY_TRANSPOSE_INPUT
- @==================================================================
- @ Main body of idct
- @==================================================================
- PART1
- Transpose8x8
- PART2
- .endm
-
- .macro IDCT_ENTRY
- @==================================================================
- @ Load the locations of the constants
- @==================================================================
- ldr r5, =constants+0*16 @constants[0]
- ldr r6, =constants+1*16 @constants[1]
- ldr r7, =constants+2*16 @constants[2]
- ldr r8, =constants+3*16 @constants[3]
- ldr r9, =constants+4*16 @constants[4]
-
- @==================================================================
- @ Load the coefficients
- @ only some input coefficients are load due to register constrain
- @==================================================================
- vld1.16 {d0, d1},[r5] @q0 =constants[0] (scalars)
- vld1.16 {d2, d3},[r6] @q1 =constants[1]
- .endm
-@==========================================================================
-@ END of MACRO DEFINITION
-@==========================================================================
-
-
- .section idct_func, "x" @ ARE
- .text @ idct_func, CODE, READONLY
- .align 2
- .code 32 @ CODE32
-
-@==========================================================================
-@ Main Routine
-@==========================================================================
-
- .global idct_1x1_venum
- .global idct_2x2_venum
- .global idct_4x4_venum
- .global idct_8x8_venum
-
-@==========================================================================
-@ FUNCTION : idct_1x1_venum
-@--------------------------------------------------------------------------
-@ DISCRIPTION : ARM optimization of one 1x1 block iDCT
-@--------------------------------------------------------------------------
-@ C PROTOTYPE : void idct_1x1_venum(int16 * input,
-@ int16 * output,
-@ int32 stride)
-@--------------------------------------------------------------------------
-@ REG INPUT : R0 pointer to input (int16)
-@ R1 pointer to output (int16)
-@ R2 block stride
-@--------------------------------------------------------------------------
-@ STACK ARG : None
-@--------------------------------------------------------------------------
-@ MEM INPUT : None
-@--------------------------------------------------------------------------
-@ REG OUTPUT : None
-@--------------------------------------------------------------------------
-@ MEM OUTPUT : None
-@--------------------------------------------------------------------------
-@ REG AFFECTED : R0 - R2
-@--------------------------------------------------------------------------
-@ STACK USAGE : none
-@--------------------------------------------------------------------------
-@ CYCLES : 17 cycles
-@--------------------------------------------------------------------------
-@ NOTES :
-@ This idct_1x1_venum code was developed with ARM instruction set.
-@
-@ ARM REGISTER ALLOCATION
-@ =========================================================================
-@ r0 : pointer to input data
-@ r1 : pointer to output area
-@ r2 : stride in the output buffer
-@==========================================================================
-.type idct_1x1_venum, %function
-idct_1x1_venum:
-
- ldrsh r3, [r0] @ Load signed half word (int16)
- ldr r2, =1028 @ 1028 = 4 + 128 << 3
- @ 4 for rounding, 128 for offset
- add r2, r3, r2
- asrs r2, r2, #3 @ Divide by 8, and set status bit
- movmi r2, #0 @ Clamp to be greater than 0
- cmp r2, #255
- movgt r2, #255 @ Clamp to be less than 255
- str r2, [r1] @ Save output
- bx lr @ Return to caller
-
- @ end of idct_1x1_venum
-
-
-@==========================================================================
-@ FUNCTION : idct_2x2_venum
-@--------------------------------------------------------------------------
-@ DISCRIPTION : VeNum optimization of one 2x2 block iDCT
-@--------------------------------------------------------------------------
-@ C PROTOTYPE : void idct_2x2_venum(int16 * input,
-@ int16 * output,
-@ int32 stride)
-@--------------------------------------------------------------------------
-@ REG INPUT : R0 pointer to input (int16)
-@ R1 pointer to output (int16)
-@ R2 block stride
-@--------------------------------------------------------------------------
-@ STACK ARG : None
-@--------------------------------------------------------------------------
-@ MEM INPUT : None
-@--------------------------------------------------------------------------
-@ REG OUTPUT : None
-@--------------------------------------------------------------------------
-@ MEM OUTPUT : None
-@--------------------------------------------------------------------------
-@ REG AFFECTED : R0 - R2
-@--------------------------------------------------------------------------
-@ STACK USAGE : none
-@--------------------------------------------------------------------------
-@ CYCLES : 27 cycles
-@--------------------------------------------------------------------------
-@ NOTES : Output buffer must be an 8x8 16-bit buffer
-@
-@ ARM REGISTER ALLOCATION
-@ ==========================================
-@ r0 : pointer to input data
-@ r1 : pointer to output area
-@ r2 : stride in the output buffer
-@ -------------------------------------------
-@
-@ VENUM REGISTER ALLOCATION
-@ =================================================
-@ q0 : output x0 - x4
-@ q1 : not used
-@ q2 : not used
-@ q3 : not used
-@ q4 : not used
-@ q5 : not used
-@ q6 : not used
-@ q7 : not used
-@ q8 : input y0 - y4
-@ q9 : intermediate value
-@ q10 : intermediate value
-@ q11 : offset value
-@ q12 : clamp value
-@ q13 : not used
-@ q14 : not used
-@ q15 : not used
-@==========================================================================
-.type idct_2x2_venum, %function
-idct_2x2_venum:
-
- vld4.32 {d16, d17, d18, d19}, [r0]
- @ d16: y0 | y1 | y2 | y3 (LSB | MSB)
-
- vtrn.32 d16, d17 @ d16: y0 | y1 | X | X
- @ d17: y2 | y3 | X | X
-
- vqadd.s16 d18, d16, d17 @ d18: y0+y2 | y1+y3 | X | X q: saturated
- vqsub.s16 d19, d16, d17 @ d19: y0-y2 | y1-y3 | X | X q: saturated
-
- vtrn.16 d18, d19 @ d18: y0+y2 | y0-y2 | X | X
- @ d19: y1+y3 | y1-y3 | X | X
-
- vqadd.s16 d20, d18, d19 @ d20: (y0+y2)+(y1+y3) | (y0-y2)+(y1-y3)
- @ x0 | x2 | X | X
- vqsub.s16 d21, d18, d19 @ d21: (y0+y2)-(y1+y3) | (y0-y2)-(y1-y3)
- @ x1 | x3 | X | X
-
- vtrn.16 d20, d21 @ d20: x0 | x1 | X | X
- @ d21: x2 | x3 | X | X
-
- vrshr.s16 q10, q10, #3 @ Divide by 8
-
- vmov.i16 q11, #128 @ q11 = 128|128|128|128|128|128|128|128
- vqadd.s16 q0, q10, q11 @ Add offset to make output in [0,255]
-
- vmov.i16 q12, #0 @ q12 = [0000000000000000]
- vmov.i16 q13, #255 @ q13 = [FFFFFFFFFFFFFFFF] (hex)
-
- vmax.s16 q0, q0, q12 @ Clamp > 0
- vmin.s16 q0, q0, q13 @ Clamp < 255
-
- vstr d0, [r1] @ Store x0 | x1 | X | X
- @ Potential out of boundary issue
- add r1, r1, r2 @ Add the offset to the output pointer
- vstr d1, [r1] @ Store x2 | x3 | X | X
- @ Potential out of boundary issue
- bx lr @ Return to caller
-
- @ end of idct_2x2_venum
-
-
-@==========================================================================
-@ FUNCTION : idct_4x4_venum
-@--------------------------------------------------------------------------
-@ DISCRIPTION : VeNum optimization of one 4x4 block iDCT
-@--------------------------------------------------------------------------
-@ C PROTOTYPE : void idct_4x4_venum(int16 * input,
-@ int16 * output,
-@ int32 stride)
-@--------------------------------------------------------------------------
-@ REG INPUT : R0 pointer to input (int16)
-@ R1 pointer to output (int16)
-@ R2 block stride
-@--------------------------------------------------------------------------
-@ STACK ARG : None
-@--------------------------------------------------------------------------
-@ MEM INPUT : None
-@--------------------------------------------------------------------------
-@ REG OUTPUT : None
-@--------------------------------------------------------------------------
-@ MEM OUTPUT : None
-@--------------------------------------------------------------------------
-@ REG AFFECTED : R0 - R3, R12
-@--------------------------------------------------------------------------
-@ STACK USAGE : none
-@--------------------------------------------------------------------------
-@ CYCLES : 56 cycles
-@--------------------------------------------------------------------------
-@ NOTES :
-@
-@ ARM REGISTER ALLOCATION
-@ ==========================================
-@ r0 : pointer to input data
-@ r1 : pointer to output area
-@ r2 : stride in the output buffer
-@ r3 : pointer to the coefficient set
-@ r12 : pointer to the coefficient set
-@ -------------------------------------------
-@
-@ VENUM REGISTER ALLOCATION
-@ =================================================
-@ q0 : coefficients[0]
-@ q1 : coefficients[1]
-@ q2 : coefficients[2]
-@ q3 : coefficients[3]
-@ q4 : not used
-@ q5 : not used
-@ q6 : not used
-@ q7 : not used
-@ q8 : input y0 - y7
-@ q9 : input y8 - y15
-@ q10 : intermediate value
-@ q11 : intermediate value
-@ q12 : intermediate value
-@ q13 : intermediate value
-@ q14 : intermediate value
-@ q15 : intermediate value
-@==========================================================================
-.type idct_4x4_venum, %function
-idct_4x4_venum:
-
- @ Load the locations of the first 2 sets of coefficients
- ldr r3, =coefficient+0*16 @ coefficient[0]
- ldr r12, =coefficient+1*16 @ coefficient[1]
-
- @ Load the first 2 sets of coefficients
- vld1.16 {d0, d1},[r3] @ q0 = C4 | C2 | C4 | C6 | C4 | C2 | C4 | C6
- vld1.16 {d2, d3},[r12] @ q1 = C4 | C6 | C4 | C2 | C4 | C6 | C4 | C2
-
- @ Load the locations of the second 2 sets of coefficients
- ldr r3, =coefficient+2*16 @ coefficient[2]
- ldr r12, =coefficient+3*16 @ coefficient[3]
-
- @ Load the second 2 sets of coefficients
- vld1.16 {d4, d5},[r3] @ q2 = C4 | C4 | C4 | C4 | C2 | C2 | C2 | C2
- vld1.16 {d6, d7},[r12] @ q3 = C4 | C4 | C4 | C4 | C6 | C6 | C6 | C6
-
- @ Load the input values
- vld1.16 {d16}, [r0], r2 @ d16: y0 | y1 | y2 | y3 (LSB | MSB)
- vld1.16 {d17}, [r0], r2 @ d17: y4 | y5 | y6 | y7 (LSB | MSB)
- vld1.16 {d18}, [r0], r2 @ d18: y8 | y9 | y10 | y11 (LSB | MSB)
- vld1.16 {d19}, [r0], r2 @ d19: y12 | y13 | y14 | y15 (LSB | MSB)
-
- @ Apply iDCT Horizonally
-
- @ q8: y0 |y1 |y2 |y3 |y4 |y5 |y6 |y7
- @ q9: y8 |y9 |y10|y11|y12|y13|y14|y15
-
- @======================================================================
- @ vqrdmulh doubles the result and save the high 16 bits of the result,
- @ this is equivalent to right shift by 15 bits.
- @ since coefficients are in Q15 format, it contradicts with the right
- @ shift 15 here, so the final result is in Q0 format
- @
- @ vqrdmulh will also round the result
- @======================================================================
-
- vqrdmulh.s16 q10, q8, q0 @ q10: C4*y0 | C2*y1 | C4*y2 | C6*y3 | C4*y4 | C2*y5 | C4*y6 | C6*y7
- vqrdmulh.s16 q11, q8, q1 @ q11: C4*y0 | C6*y1 | C4*y2 | C2*y3 | C4*y4 | C6*y5 | C4*y6 | C2*y7
-
- vqrdmulh.s16 q12, q9, q0 @ q12: C4*y8 | C2*y9 | C4*y10 | C6*y11 | C4*y12 | C2*y13 | C4*y14 | C6*y15
- vqrdmulh.s16 q13, q9, q1 @ q13: C4*y8 | C6*y9 | C4*y10 | C2*y11 | C4*y12 | C6*y13 | C4*y14 | C2*y15
-
- vtrn.32 q10, q12 @ q10: C4*y0 | C2*y1 | C4*y8 | C2*y9 | C4*y4 | C2*y5 | C4*y12 | C2*y13
- @ q12: C4*y2 | C6*y3 | C4*y10 | C6*y11 | C4*y6 | C6*y7 | C4*y14 | C6*y15
-
- vtrn.32 q11, q13 @ q11: C4*y0 | C6*y1 | C4*y8 | C6*y9 | C4*y4 | C6*y5 | C4*y12 | C6*y13
- @ q13: C4*y2 | C2*y3 | C4*y10 | C2*y11 | C4*y6 | C2*y7 | C4*y14 | C2*y15
-
- vqadd.s16 q14, q10, q12 @ q14: C4*y0 + C4*y2 | C2*y1 + C6*y3 | C4*y8 + C4*y10 | C2*y9 + C6*y11 | C4*y4 + C4*y6 | C2*y5 + C6*y7 | C4*y12 + C4*y14 | C2*y13 + C6*y15
- @ S0 | S2 | S8 | S10 | S4 | S6 | S12 | S14
-
- vqsub.s16 q15, q11, q13 @ q15: C4*y0 - C4*y2 | C6*y1 - C2*y3 | C4*y8 - C4*y10 | C6*y9 - C2*y11 | C4*y4 - C4*y6 | C6*y5 - C2*y7 | C4*y12 - C4*y14 | C6*y13 - C2*y15
- @ S1 | S3 | S9 | S11 | S5 | S7 | S13 | S15
-
- vtrn.16 q14, q15 @ q14: S0 | S1 | S8 | S9 | S4 | S5 | S12 | S13
- @ q15: S2 | S3 | S10 | S11 | S6 | S7 | S14 | S15
-
- vqadd.s16 q8, q14, q15 @ q8: Z0 | Z1 | Z8 | Z9 | Z4 | Z5 | Z12 | Z13
- vqsub.s16 q9, q14, q15 @ q9: Z3 | Z2 | Z11 | Z10 | Z7 | Z6 | Z15 | Z14
- vrev32.16 q9, q9 @ q9: Z2 | Z3 | Z10 | Z11 | Z6 | Z7 | Z14 | Z15
-
-
- @ Apply iDCT Vertically
-
- vtrn.32 q8, q9 @ q8: Z0 | Z1 | Z2 | Z3 | Z4 | Z5 | Z6 | Z7
- @ q9: Z8 | Z9 | Z10 | Z11 | Z12 | Z13 | Z14 | Z15
-
-
- vqrdmulh.s16 q10, q8, q2 @ q10: C4*Z0 | C4*Z1 | C4*Z2 | C4*Z3 | C2*Z4 | C2*Z5 | C2*Z6 | C2*Z7
- vqrdmulh.s16 q11, q8, q3 @ q11: C4*Z0 | C4*Z1 | C4*Z2 | C4*Z3 | C6*Z4 | C6*Z5 | C6*Z6 | C6*Z7
-
- vqrdmulh.s16 q12, q9, q2 @ q12: C4*Z8 | C4*Z9 | C4*Z10 | C4*Z11 | C2*Z12 | C2*Z13 | C2*Z14 | C2*Z15
- vqrdmulh.s16 q13, q9, q3 @ q13: C4*Z8 | C4*Z9 | C4*Z10 | C4*Z11 | C6*Z12 | C6*Z13 | C6*Z14 | C6*Z15
-
- vqadd.s16 q14, q10, q13 @ q14: C4*Z0+C4*Z8 | C4*Z1+C4*Z9 | C4*Z2+C4*Z10 | C4*Z3+C4*Z11 | C2*Z4+C6*Z12 | C2*Z5+C6*Z13 | C2*Z6+C6*Z14 | C2*Z7+C6*Z15
- @ s0 | s4 | s8 | s12 | s2 | s6 | s10 | s14
-
- vqsub.s16 q15, q11, q12 @ q15: C4*Z0-C4*Z8 | C4*Z1-C4*Z9 | C4*Z2-C4*Z10 | C4*Z3-C4*Z11 | C6*Z4-C2*Z12 | C6*Z5-C2*Z13 | C6*Z6-C2*Z14 | C6*Z7-C2*Z15
- @ s1 | s5 | s9 | s13 | s3 | s7 | s11 | s15
-
- vswp d29, d30 @ q14: s0 | s4 | s8 | s12 | s1 | s5 | s9 | s13
- @ q15: s2 | s6 | s10 | s14 | s3 | s7 | s11 | s15
-
- vqadd.s16 q8, q14, q15 @ q8: x0 | x4 | x8 | x12 | x1 | x5 | x9 | x13
- vqsub.s16 q9, q14, q15 @ q9: x3 | x7 | x11 | x15 | x2 | x6 | x10 | x14
-
- vmov.i16 q10, #0 @ q10=[0000000000000000]
- vmov.i16 q11, #255 @ q11=[FFFFFFFFFFFFFFFF] (hex)
-
- vmov.i16 q0, #128 @ q0 = 128|128|128|128|128|128|128|128
-
- vqadd.s16 q8, q8, q0 @ Add the offset
- vqadd.s16 q9, q9, q0 @ Add the offset
-
- vmax.s16 q8, q8, q10 @ clamp > 0
- vmin.s16 q8, q8, q11 @ clamp < 255
-
- vmax.s16 q9, q9, q10 @ clamp > 0
- vmin.s16 q9, q9, q11 @ clamp < 255
-
- vst1.16 {d16}, [r1], r2 @ d16: x0 | x1 | x2 | x3 (LSB | MSB)
- vst1.16 {d17}, [r1], r2 @ d17: x4 | x5 | x6 | x7 (LSB | MSB)
- vst1.16 {d19}, [r1], r2 @ d18: x8 | x9 | x10 | x11 (LSB | MSB)
- vst1.16 {d18}, [r1], r2 @ d19: x12| x13 | x14 | x15 (LSB | MSB)
-
- bx lr @ Return to caller
-
- @ end of idct_4x4_venum
-
-@==========================================================================
-@ FUNCTION : idct_8x8_venum
-@--------------------------------------------------------------------------
-@ DISCRIPTION : VeNum optimization of one 8x8 block iDCT
-@--------------------------------------------------------------------------
-@ C PROTOTYPE : void idct_8x8_venum(int16 * input,
-@ int16 * output,
-@ int32 stride)
-@--------------------------------------------------------------------------
-@ REG INPUT : R0 pointer to input (int16)
-@ R1 pointer to output (int16)
-@ R2 block stride
-@--------------------------------------------------------------------------
-@ STACK ARG : None
-@--------------------------------------------------------------------------
-@ MEM INPUT : None
-@--------------------------------------------------------------------------
-@ REG OUTPUT : None
-@--------------------------------------------------------------------------
-@ MEM OUTPUT : None
-@--------------------------------------------------------------------------
-@ REG AFFECTED : R0 - R9
-@--------------------------------------------------------------------------
-@ STACK USAGE : none
-@--------------------------------------------------------------------------
-@ CYCLES : 177 cycles
-@--------------------------------------------------------------------------
-@ NOTES :
-@
-@ It was tested to be IEEE 1180 compliant. Since IEEE 1180 compliance is more stringent
-@ than MPEG-4 compliance, this version is also MPEG-4 compliant.
-@
-@ CODE STRUCTURE:
-@ (i) Macros for transposing an 8x8 matrix and for configuring the VFP unit are defined.
-@ (ii) Macro for IDCT in one dimension is defined as four stages
-@ (iii) The two dimensional code begins
-@ (iv) constants are defined in the area DataArea
-@
-@ PROGRAM FLOW:
-@
-@ The VFP is configured
-@ The parameters to IDCT are loaded
-@ the coefficients are loaded
-@ loop:
-@ decrement loop counter
-@ The first input Matrix is loaded and pre-scaled
-@ The input is prescaled using the constants
-@ IDCT is performed in one dimension on the 8 columns
-@ The matrix is transposed
-@ A bias is loaded an added to the matrix
-@ IDCT is performed in one dimension on the 8 rows
-@ The matrix is post-scaled
-@ The matrix is saved
-@ test loop counter and loop if greater than zero
-@ stop
-@
-@
-@ ARM REGISTER ALLOCATION
-@ ==========================================
-@ r0 : pointer to input data
-@ r1 : pointer to output are
-@ r2 : stride in the output buffer
-@ r3 :
-@ r4 :
-@ r5 : pointer to constants[0] [5]
-@ r6 : pointer to constants[1]
-@ r7 : pointer to constants[2]
-@ r8 : pointer to constants[3]
-@ r9 : pointer to constants[4]
-@ -------------------------------------------
-@
-@ VENUM REGISTER ALLOCATION
-@ =================================================
-@ q0 : constants[0]
-@ q1 : constants[1]
-@ q2 : constants[2], IDCT1D in-place scratch
-@ q3 : constants[3], IDCT1D in-place scratch
-@ q4 : constants[4], IDCT1D in-place scratch, and bias compensation
-@ q5 : IDCT1D in-place scratch
-@ q6 : IDCT1D in-place scratch
-@ q7 : IDCT1D in-place scratch
-@ q8 : Matrix[0] IDCT1D in-place scratch
-@ q9 : Matrix[1] IDCT1D in-place scratch
-@ q10 : Matrix[2] IDCT1D in-place scratch
-@ q11 : Matrix[3] IDCT1D in-place scratch
-@ q12 : Matrix[4] IDCT1D in-place scratch
-@ q13 : Matrix[5] IDCT1D in-place scratch
-@ q14 : Matrix[6] IDCT1D in-place scratch
-@ q15 : Matrix[7] IDCT1D in-place scratch
-@==========================================================================
-.type idct_8x8_venum, %function
-idct_8x8_venum:
-
- push {r5-r9}
- vpush {d8-d15}
- IDCT_ENTRY
- BIG_BODY_TRANSPOSE_INPUT
- vpop {d8-d15}
- pop {r5-r9}
- bx lr
- @ end of idct_8x8_venum
-
-@==========================================================================
-@ Constants Definition AREA: define idct kernel, bias
-@==========================================================================
- .section ro_data_area @ AREA RODataArea
- .data @ DATA, READONLY
- .align 5 @ ALIGN=5
-
-constants:
- .hword 23170, 13573, 6518, 21895, -23170, -21895, 8223, 8224
- .hword 16384, 22725, 21407, 19266, 16384, 19266, 21407, 22725
- .hword 22725, 31521, 29692, 26722, 22725, 26722, 29692, 31521
- .hword 21407, 29692, 27969, 25172, 21407, 25172, 27969, 29692
- .hword 19266, 26722, 25172, 22654, 19266, 22654, 25172, 26722
- .hword 0, 255, 0, 0
-
-coefficient: @ These are the coefficent used by 4x4 iDCT in Q15 format
- .hword 11585, 15137, 11585, 6270, 11585, 15137, 11585, 6270 @ C4, C2, C4, C6, C4, C2, C4, C6 /2
- .hword 11585, 6270, 11585, 15137, 11585, 6270, 11585, 15137 @ C4, C6, C4, C2, C4, C6, C4, C2 /2
- .hword 11585, 11585, 11585, 11585, 15137, 15137, 15137, 15137 @ C4, C4, C4, C4, C2, C2, C2, C2 /2
- .hword 11585, 11585, 11585, 11585, 6270, 6270, 6270, 6270 @ C4, C4, C4, C4, C6, C6, C6, C6 /2
-
-.end
diff --git a/libjpegtwrp/cderror.h b/libjpegtwrp/cderror.h
deleted file mode 100644
index 70435e161..000000000
--- a/libjpegtwrp/cderror.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * cderror.h
- *
- * Copyright (C) 1994-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file defines the error and message codes for the cjpeg/djpeg
- * applications. These strings are not needed as part of the JPEG library
- * proper.
- * Edit this file to add new codes, or to translate the message strings to
- * some other language.
- */
-
-/*
- * To define the enum list of message codes, include this file without
- * defining macro JMESSAGE. To create a message string table, include it
- * again with a suitable JMESSAGE definition (see jerror.c for an example).
- */
-#ifndef JMESSAGE
-#ifndef CDERROR_H
-#define CDERROR_H
-/* First time through, define the enum list */
-#define JMAKE_ENUM_LIST
-#else
-/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */
-#define JMESSAGE(code,string)
-#endif /* CDERROR_H */
-#endif /* JMESSAGE */
-
-#ifdef JMAKE_ENUM_LIST
-
-typedef enum {
-
-#define JMESSAGE(code,string) code ,
-
-#endif /* JMAKE_ENUM_LIST */
-
-JMESSAGE(JMSG_FIRSTADDONCODE=1000, NULL) /* Must be first entry! */
-
-#ifdef BMP_SUPPORTED
-JMESSAGE(JERR_BMP_BADCMAP, "Unsupported BMP colormap format")
-JMESSAGE(JERR_BMP_BADDEPTH, "Only 8- and 24-bit BMP files are supported")
-JMESSAGE(JERR_BMP_BADHEADER, "Invalid BMP file: bad header length")
-JMESSAGE(JERR_BMP_BADPLANES, "Invalid BMP file: biPlanes not equal to 1")
-JMESSAGE(JERR_BMP_COLORSPACE, "BMP output must be grayscale or RGB")
-JMESSAGE(JERR_BMP_COMPRESSED, "Sorry, compressed BMPs not yet supported")
-JMESSAGE(JERR_BMP_NOT, "Not a BMP file - does not start with BM")
-JMESSAGE(JTRC_BMP, "%ux%u 24-bit BMP image")
-JMESSAGE(JTRC_BMP_MAPPED, "%ux%u 8-bit colormapped BMP image")
-JMESSAGE(JTRC_BMP_OS2, "%ux%u 24-bit OS2 BMP image")
-JMESSAGE(JTRC_BMP_OS2_MAPPED, "%ux%u 8-bit colormapped OS2 BMP image")
-#endif /* BMP_SUPPORTED */
-
-#ifdef GIF_SUPPORTED
-JMESSAGE(JERR_GIF_BUG, "GIF output got confused")
-JMESSAGE(JERR_GIF_CODESIZE, "Bogus GIF codesize %d")
-JMESSAGE(JERR_GIF_COLORSPACE, "GIF output must be grayscale or RGB")
-JMESSAGE(JERR_GIF_IMAGENOTFOUND, "Too few images in GIF file")
-JMESSAGE(JERR_GIF_NOT, "Not a GIF file")
-JMESSAGE(JTRC_GIF, "%ux%ux%d GIF image")
-JMESSAGE(JTRC_GIF_BADVERSION,
- "Warning: unexpected GIF version number '%c%c%c'")
-JMESSAGE(JTRC_GIF_EXTENSION, "Ignoring GIF extension block of type 0x%02x")
-JMESSAGE(JTRC_GIF_NONSQUARE, "Caution: nonsquare pixels in input")
-JMESSAGE(JWRN_GIF_BADDATA, "Corrupt data in GIF file")
-JMESSAGE(JWRN_GIF_CHAR, "Bogus char 0x%02x in GIF file, ignoring")
-JMESSAGE(JWRN_GIF_ENDCODE, "Premature end of GIF image")
-JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits")
-#endif /* GIF_SUPPORTED */
-
-#ifdef PPM_SUPPORTED
-JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB")
-JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file")
-JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file")
-JMESSAGE(JTRC_PGM, "%ux%u PGM image")
-JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image")
-JMESSAGE(JTRC_PPM, "%ux%u PPM image")
-JMESSAGE(JTRC_PPM_TEXT, "%ux%u text PPM image")
-#endif /* PPM_SUPPORTED */
-
-#ifdef RLE_SUPPORTED
-JMESSAGE(JERR_RLE_BADERROR, "Bogus error code from RLE library")
-JMESSAGE(JERR_RLE_COLORSPACE, "RLE output must be grayscale or RGB")
-JMESSAGE(JERR_RLE_DIMENSIONS, "Image dimensions (%ux%u) too large for RLE")
-JMESSAGE(JERR_RLE_EMPTY, "Empty RLE file")
-JMESSAGE(JERR_RLE_EOF, "Premature EOF in RLE header")
-JMESSAGE(JERR_RLE_MEM, "Insufficient memory for RLE header")
-JMESSAGE(JERR_RLE_NOT, "Not an RLE file")
-JMESSAGE(JERR_RLE_TOOMANYCHANNELS, "Cannot handle %d output channels for RLE")
-JMESSAGE(JERR_RLE_UNSUPPORTED, "Cannot handle this RLE setup")
-JMESSAGE(JTRC_RLE, "%ux%u full-color RLE file")
-JMESSAGE(JTRC_RLE_FULLMAP, "%ux%u full-color RLE file with map of length %d")
-JMESSAGE(JTRC_RLE_GRAY, "%ux%u grayscale RLE file")
-JMESSAGE(JTRC_RLE_MAPGRAY, "%ux%u grayscale RLE file with map of length %d")
-JMESSAGE(JTRC_RLE_MAPPED, "%ux%u colormapped RLE file with map of length %d")
-#endif /* RLE_SUPPORTED */
-
-#ifdef TARGA_SUPPORTED
-JMESSAGE(JERR_TGA_BADCMAP, "Unsupported Targa colormap format")
-JMESSAGE(JERR_TGA_BADPARMS, "Invalid or unsupported Targa file")
-JMESSAGE(JERR_TGA_COLORSPACE, "Targa output must be grayscale or RGB")
-JMESSAGE(JTRC_TGA, "%ux%u RGB Targa image")
-JMESSAGE(JTRC_TGA_GRAY, "%ux%u grayscale Targa image")
-JMESSAGE(JTRC_TGA_MAPPED, "%ux%u colormapped Targa image")
-#else
-JMESSAGE(JERR_TGA_NOTCOMP, "Targa support was not compiled")
-#endif /* TARGA_SUPPORTED */
-
-JMESSAGE(JERR_BAD_CMAP_FILE,
- "Color map file is invalid or of unsupported format")
-JMESSAGE(JERR_TOO_MANY_COLORS,
- "Output file format cannot handle %d colormap entries")
-JMESSAGE(JERR_UNGETC_FAILED, "ungetc failed")
-#ifdef TARGA_SUPPORTED
-JMESSAGE(JERR_UNKNOWN_FORMAT,
- "Unrecognized input file format --- perhaps you need -targa")
-#else
-JMESSAGE(JERR_UNKNOWN_FORMAT, "Unrecognized input file format")
-#endif
-JMESSAGE(JERR_UNSUPPORTED_FORMAT, "Unsupported output file format")
-
-#ifdef JMAKE_ENUM_LIST
-
- JMSG_LASTADDONCODE
-} ADDON_MESSAGE_CODE;
-
-#undef JMAKE_ENUM_LIST
-#endif /* JMAKE_ENUM_LIST */
-
-/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */
-#undef JMESSAGE
diff --git a/libjpegtwrp/cdjpeg.c b/libjpegtwrp/cdjpeg.c
deleted file mode 100644
index b6250ff97..000000000
--- a/libjpegtwrp/cdjpeg.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * cdjpeg.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains common support routines used by the IJG application
- * programs (cjpeg, djpeg, jpegtran).
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-#include <ctype.h> /* to declare isupper(), tolower() */
-#ifdef NEED_SIGNAL_CATCHER
-#include <signal.h> /* to declare signal() */
-#endif
-#ifdef USE_SETMODE
-#include <fcntl.h> /* to declare setmode()'s parameter macros */
-/* If you have setmode() but not <io.h>, just delete this line: */
-#include <io.h> /* to declare setmode() */
-#endif
-
-
-/*
- * Signal catcher to ensure that temporary files are removed before aborting.
- * NB: for Amiga Manx C this is actually a global routine named _abort();
- * we put "#define signal_catcher _abort" in jconfig.h. Talk about bogus...
- */
-
-#ifdef NEED_SIGNAL_CATCHER
-
-static j_common_ptr sig_cinfo;
-
-void /* must be global for Manx C */
-signal_catcher (int signum)
-{
- if (sig_cinfo != NULL) {
- if (sig_cinfo->err != NULL) /* turn off trace output */
- sig_cinfo->err->trace_level = 0;
- jpeg_destroy(sig_cinfo); /* clean up memory allocation & temp files */
- }
- exit(EXIT_FAILURE);
-}
-
-
-GLOBAL(void)
-enable_signal_catcher (j_common_ptr cinfo)
-{
- sig_cinfo = cinfo;
-#ifdef SIGINT /* not all systems have SIGINT */
- signal(SIGINT, signal_catcher);
-#endif
-#ifdef SIGTERM /* not all systems have SIGTERM */
- signal(SIGTERM, signal_catcher);
-#endif
-}
-
-#endif
-
-
-/*
- * Optional progress monitor: display a percent-done figure on stderr.
- */
-
-#ifdef PROGRESS_REPORT
-
-METHODDEF(void)
-progress_monitor (j_common_ptr cinfo)
-{
- cd_progress_ptr prog = (cd_progress_ptr) cinfo->progress;
- int total_passes = prog->pub.total_passes + prog->total_extra_passes;
- int percent_done = (int) (prog->pub.pass_counter*100L/prog->pub.pass_limit);
-
- if (percent_done != prog->percent_done) {
- prog->percent_done = percent_done;
- if (total_passes > 1) {
- fprintf(stderr, "\rPass %d/%d: %3d%% ",
- prog->pub.completed_passes + prog->completed_extra_passes + 1,
- total_passes, percent_done);
- } else {
- fprintf(stderr, "\r %3d%% ", percent_done);
- }
- fflush(stderr);
- }
-}
-
-
-GLOBAL(void)
-start_progress_monitor (j_common_ptr cinfo, cd_progress_ptr progress)
-{
- /* Enable progress display, unless trace output is on */
- if (cinfo->err->trace_level == 0) {
- progress->pub.progress_monitor = progress_monitor;
- progress->completed_extra_passes = 0;
- progress->total_extra_passes = 0;
- progress->percent_done = -1;
- cinfo->progress = &progress->pub;
- }
-}
-
-
-GLOBAL(void)
-end_progress_monitor (j_common_ptr cinfo)
-{
- /* Clear away progress display */
- if (cinfo->err->trace_level == 0) {
- fprintf(stderr, "\r \r");
- fflush(stderr);
- }
-}
-
-#endif
-
-
-/*
- * Case-insensitive matching of possibly-abbreviated keyword switches.
- * keyword is the constant keyword (must be lower case already),
- * minchars is length of minimum legal abbreviation.
- */
-
-GLOBAL(boolean)
-keymatch (char * arg, const char * keyword, int minchars)
-{
- register int ca, ck;
- register int nmatched = 0;
-
- while ((ca = *arg++) != '\0') {
- if ((ck = *keyword++) == '\0')
- return FALSE; /* arg longer than keyword, no good */
- if (isupper(ca)) /* force arg to lcase (assume ck is already) */
- ca = tolower(ca);
- if (ca != ck)
- return FALSE; /* no good */
- nmatched++; /* count matched characters */
- }
- /* reached end of argument; fail if it's too short for unique abbrev */
- if (nmatched < minchars)
- return FALSE;
- return TRUE; /* A-OK */
-}
-
-
-/*
- * Routines to establish binary I/O mode for stdin and stdout.
- * Non-Unix systems often require some hacking to get out of text mode.
- */
-
-GLOBAL(FILE *)
-read_stdin (void)
-{
- FILE * input_file = stdin;
-
-#ifdef USE_SETMODE /* need to hack file mode? */
- setmode(fileno(stdin), O_BINARY);
-#endif
-#ifdef USE_FDOPEN /* need to re-open in binary mode? */
- if ((input_file = fdopen(fileno(stdin), READ_BINARY)) == NULL) {
- fprintf(stderr, "Cannot reopen stdin\n");
- exit(EXIT_FAILURE);
- }
-#endif
- return input_file;
-}
-
-
-GLOBAL(FILE *)
-write_stdout (void)
-{
- FILE * output_file = stdout;
-
-#ifdef USE_SETMODE /* need to hack file mode? */
- setmode(fileno(stdout), O_BINARY);
-#endif
-#ifdef USE_FDOPEN /* need to re-open in binary mode? */
- if ((output_file = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) {
- fprintf(stderr, "Cannot reopen stdout\n");
- exit(EXIT_FAILURE);
- }
-#endif
- return output_file;
-}
diff --git a/libjpegtwrp/cdjpeg.h b/libjpegtwrp/cdjpeg.h
deleted file mode 100644
index 2b387b6e5..000000000
--- a/libjpegtwrp/cdjpeg.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * cdjpeg.h
- *
- * Copyright (C) 1994-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains common declarations for the sample applications
- * cjpeg and djpeg. It is NOT used by the core JPEG library.
- */
-
-#define JPEG_CJPEG_DJPEG /* define proper options in jconfig.h */
-#define JPEG_INTERNAL_OPTIONS /* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jerror.h" /* get library error codes too */
-#include "cderror.h" /* get application-specific error codes */
-
-
-/*
- * Object interface for cjpeg's source file decoding modules
- */
-
-typedef struct cjpeg_source_struct * cjpeg_source_ptr;
-
-struct cjpeg_source_struct {
- JMETHOD(void, start_input, (j_compress_ptr cinfo,
- cjpeg_source_ptr sinfo));
- JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo,
- cjpeg_source_ptr sinfo));
- JMETHOD(void, finish_input, (j_compress_ptr cinfo,
- cjpeg_source_ptr sinfo));
-
- FILE *input_file;
-
- JSAMPARRAY buffer;
- JDIMENSION buffer_height;
-};
-
-
-/*
- * Object interface for djpeg's output file encoding modules
- */
-
-typedef struct djpeg_dest_struct * djpeg_dest_ptr;
-
-struct djpeg_dest_struct {
- /* start_output is called after jpeg_start_decompress finishes.
- * The color map will be ready at this time, if one is needed.
- */
- JMETHOD(void, start_output, (j_decompress_ptr cinfo,
- djpeg_dest_ptr dinfo));
- /* Emit the specified number of pixel rows from the buffer. */
- JMETHOD(void, put_pixel_rows, (j_decompress_ptr cinfo,
- djpeg_dest_ptr dinfo,
- JDIMENSION rows_supplied));
- /* Finish up at the end of the image. */
- JMETHOD(void, finish_output, (j_decompress_ptr cinfo,
- djpeg_dest_ptr dinfo));
-
- /* Target file spec; filled in by djpeg.c after object is created. */
- FILE * output_file;
-
- /* Output pixel-row buffer. Created by module init or start_output.
- * Width is cinfo->output_width * cinfo->output_components;
- * height is buffer_height.
- */
- JSAMPARRAY buffer;
- JDIMENSION buffer_height;
-};
-
-
-/*
- * cjpeg/djpeg may need to perform extra passes to convert to or from
- * the source/destination file format. The JPEG library does not know
- * about these passes, but we'd like them to be counted by the progress
- * monitor. We use an expanded progress monitor object to hold the
- * additional pass count.
- */
-
-struct cdjpeg_progress_mgr {
- struct jpeg_progress_mgr pub; /* fields known to JPEG library */
- int completed_extra_passes; /* extra passes completed */
- int total_extra_passes; /* total extra */
- /* last printed percentage stored here to avoid multiple printouts */
- int percent_done;
-};
-
-typedef struct cdjpeg_progress_mgr * cd_progress_ptr;
-
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jinit_read_bmp jIRdBMP
-#define jinit_write_bmp jIWrBMP
-#define jinit_read_gif jIRdGIF
-#define jinit_write_gif jIWrGIF
-#define jinit_read_ppm jIRdPPM
-#define jinit_write_ppm jIWrPPM
-#define jinit_read_rle jIRdRLE
-#define jinit_write_rle jIWrRLE
-#define jinit_read_targa jIRdTarga
-#define jinit_write_targa jIWrTarga
-#define read_quant_tables RdQTables
-#define read_scan_script RdScnScript
-#define set_quant_slots SetQSlots
-#define set_sample_factors SetSFacts
-#define read_color_map RdCMap
-#define enable_signal_catcher EnSigCatcher
-#define start_progress_monitor StProgMon
-#define end_progress_monitor EnProgMon
-#define read_stdin RdStdin
-#define write_stdout WrStdout
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-/* Module selection routines for I/O modules. */
-
-EXTERN(cjpeg_source_ptr) jinit_read_bmp JPP((j_compress_ptr cinfo));
-EXTERN(djpeg_dest_ptr) jinit_write_bmp JPP((j_decompress_ptr cinfo,
- boolean is_os2));
-EXTERN(cjpeg_source_ptr) jinit_read_gif JPP((j_compress_ptr cinfo));
-EXTERN(djpeg_dest_ptr) jinit_write_gif JPP((j_decompress_ptr cinfo));
-EXTERN(cjpeg_source_ptr) jinit_read_ppm JPP((j_compress_ptr cinfo));
-EXTERN(djpeg_dest_ptr) jinit_write_ppm JPP((j_decompress_ptr cinfo));
-EXTERN(cjpeg_source_ptr) jinit_read_rle JPP((j_compress_ptr cinfo));
-EXTERN(djpeg_dest_ptr) jinit_write_rle JPP((j_decompress_ptr cinfo));
-EXTERN(cjpeg_source_ptr) jinit_read_targa JPP((j_compress_ptr cinfo));
-EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo));
-
-/* cjpeg support routines (in rdswitch.c) */
-
-EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename,
- int scale_factor, boolean force_baseline));
-EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename));
-EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg));
-EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg));
-
-/* djpeg support routines (in rdcolmap.c) */
-
-EXTERN(void) read_color_map JPP((j_decompress_ptr cinfo, FILE * infile));
-
-/* common support routines (in cdjpeg.c) */
-
-EXTERN(void) enable_signal_catcher JPP((j_common_ptr cinfo));
-EXTERN(void) start_progress_monitor JPP((j_common_ptr cinfo,
- cd_progress_ptr progress));
-EXTERN(void) end_progress_monitor JPP((j_common_ptr cinfo));
-EXTERN(boolean) keymatch JPP((char * arg, const char * keyword, int minchars));
-EXTERN(FILE *) read_stdin JPP((void));
-EXTERN(FILE *) write_stdout JPP((void));
-
-/* miscellaneous useful macros */
-
-#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */
-#define READ_BINARY "r"
-#define WRITE_BINARY "w"
-#else
-#ifdef VMS /* VMS is very nonstandard */
-#define READ_BINARY "rb", "ctx=stm"
-#define WRITE_BINARY "wb", "ctx=stm"
-#else /* standard ANSI-compliant case */
-#define READ_BINARY "rb"
-#define WRITE_BINARY "wb"
-#endif
-#endif
-
-#ifndef EXIT_FAILURE /* define exit() codes if not provided */
-#define EXIT_FAILURE 1
-#endif
-#ifndef EXIT_SUCCESS
-#ifdef VMS
-#define EXIT_SUCCESS 1 /* VMS is very nonstandard */
-#else
-#define EXIT_SUCCESS 0
-#endif
-#endif
-#ifndef EXIT_WARNING
-#ifdef VMS
-#define EXIT_WARNING 1 /* VMS is very nonstandard */
-#else
-#define EXIT_WARNING 2
-#endif
-#endif
diff --git a/libjpegtwrp/change.log b/libjpegtwrp/change.log
deleted file mode 100644
index 74102c0db..000000000
--- a/libjpegtwrp/change.log
+++ /dev/null
@@ -1,217 +0,0 @@
-CHANGE LOG for Independent JPEG Group's JPEG software
-
-
-Version 6b 27-Mar-1998
------------------------
-
-jpegtran has new features for lossless image transformations (rotation
-and flipping) as well as "lossless" reduction to grayscale.
-
-jpegtran now copies comments by default; it has a -copy switch to enable
-copying all APPn blocks as well, or to suppress comments. (Formerly it
-always suppressed comments and APPn blocks.) jpegtran now also preserves
-JFIF version and resolution information.
-
-New decompressor library feature: COM and APPn markers found in the input
-file can be saved in memory for later use by the application. (Before,
-you had to code this up yourself with a custom marker processor.)
-
-There is an unused field "void * client_data" now in compress and decompress
-parameter structs; this may be useful in some applications.
-
-JFIF version number information is now saved by the decoder and accepted by
-the encoder. jpegtran uses this to copy the source file's version number,
-to ensure "jpegtran -copy all" won't create bogus files that contain JFXX
-extensions but claim to be version 1.01. Applications that generate their
-own JFXX extension markers also (finally) have a supported way to cause the
-encoder to emit JFIF version number 1.02.
-
-djpeg's trace mode reports JFIF 1.02 thumbnail images as such, rather
-than as unknown APP0 markers.
-
-In -verbose mode, djpeg and rdjpgcom will try to print the contents of
-APP12 markers as text. Some digital cameras store useful text information
-in APP12 markers.
-
-Handling of truncated data streams is more robust: blocks beyond the one in
-which the error occurs will be output as uniform gray, or left unchanged
-if decoding a progressive JPEG. The appearance no longer depends on the
-Huffman tables being used.
-
-Huffman tables are checked for validity much more carefully than before.
-
-To avoid the Unisys LZW patent, djpeg's GIF output capability has been
-changed to produce "uncompressed GIFs", and cjpeg's GIF input capability
-has been removed altogether. We're not happy about it either, but there
-seems to be no good alternative.
-
-The configure script now supports building libjpeg as a shared library
-on many flavors of Unix (all the ones that GNU libtool knows how to
-build shared libraries for). Use "./configure --enable-shared" to
-try this out.
-
-New jconfig file and makefiles for Microsoft Visual C++ and Developer Studio.
-Also, a jconfig file and a build script for Metrowerks CodeWarrior
-on Apple Macintosh. makefile.dj has been updated for DJGPP v2, and there
-are miscellaneous other minor improvements in the makefiles.
-
-jmemmac.c now knows how to create temporary files following Mac System 7
-conventions.
-
-djpeg's -map switch is now able to read raw-format PPM files reliably.
-
-cjpeg -progressive -restart no longer generates any unnecessary DRI markers.
-
-Multiple calls to jpeg_simple_progression for a single JPEG object
-no longer leak memory.
-
-
-Version 6a 7-Feb-96
---------------------
-
-Library initialization sequence modified to detect version mismatches
-and struct field packing mismatches between library and calling application.
-This change requires applications to be recompiled, but does not require
-any application source code change.
-
-All routine declarations changed to the style "GLOBAL(type) name ...",
-that is, GLOBAL, LOCAL, METHODDEF, EXTERN are now macros taking the
-routine's return type as an argument. This makes it possible to add
-Microsoft-style linkage keywords to all the routines by changing just
-these macros. Note that any application code that was using these macros
-will have to be changed.
-
-DCT coefficient quantization tables are now stored in normal array order
-rather than zigzag order. Application code that calls jpeg_add_quant_table,
-or otherwise manipulates quantization tables directly, will need to be
-changed. If you need to make such code work with either older or newer
-versions of the library, a test like "#if JPEG_LIB_VERSION >= 61" is
-recommended.
-
-djpeg's trace capability now dumps DQT tables in natural order, not zigzag
-order. This allows the trace output to be made into a "-qtables" file
-more easily.
-
-New system-dependent memory manager module for use on Apple Macintosh.
-
-Fix bug in cjpeg's -smooth option: last one or two scanlines would be
-duplicates of the prior line unless the image height mod 16 was 1 or 2.
-
-Repair minor problems in VMS, BCC, MC6 makefiles.
-
-New configure script based on latest GNU Autoconf.
-
-Correct the list of include files needed by MetroWerks C for ccommand().
-
-Numerous small documentation updates.
-
-
-Version 6 2-Aug-95
--------------------
-
-Progressive JPEG support: library can read and write full progressive JPEG
-files. A "buffered image" mode supports incremental decoding for on-the-fly
-display of progressive images. Simply recompiling an existing IJG-v5-based
-decoder with v6 should allow it to read progressive files, though of course
-without any special progressive display.
-
-New "jpegtran" application performs lossless transcoding between different
-JPEG formats; primarily, it can be used to convert baseline to progressive
-JPEG and vice versa. In support of jpegtran, the library now allows lossless
-reading and writing of JPEG files as DCT coefficient arrays. This ability
-may be of use in other applications.
-
-Notes for programmers:
-* We changed jpeg_start_decompress() to be able to suspend; this makes all
-decoding modes available to suspending-input applications. However,
-existing applications that use suspending input will need to be changed
-to check the return value from jpeg_start_decompress(). You don't need to
-do anything if you don't use a suspending data source.
-* We changed the interface to the virtual array routines: access_virt_array
-routines now take a count of the number of rows to access this time. The
-last parameter to request_virt_array routines is now interpreted as the
-maximum number of rows that may be accessed at once, but not necessarily
-the height of every access.
-
-
-Version 5b 15-Mar-95
----------------------
-
-Correct bugs with grayscale images having v_samp_factor > 1.
-
-jpeg_write_raw_data() now supports output suspension.
-
-Correct bugs in "configure" script for case of compiling in
-a directory other than the one containing the source files.
-
-Repair bug in jquant1.c: sometimes didn't use as many colors as it could.
-
-Borland C makefile and jconfig file work under either MS-DOS or OS/2.
-
-Miscellaneous improvements to documentation.
-
-
-Version 5a 7-Dec-94
---------------------
-
-Changed color conversion roundoff behavior so that grayscale values are
-represented exactly. (This causes test image files to change.)
-
-Make ordered dither use 16x16 instead of 4x4 pattern for a small quality
-improvement.
-
-New configure script based on latest GNU Autoconf.
-Fix configure script to handle CFLAGS correctly.
-Rename *.auto files to *.cfg, so that configure script still works if
-file names have been truncated for DOS.
-
-Fix bug in rdbmp.c: didn't allow for extra data between header and image.
-
-Modify rdppm.c/wrppm.c to handle 2-byte raw PPM/PGM formats for 12-bit data.
-
-Fix several bugs in rdrle.c.
-
-NEED_SHORT_EXTERNAL_NAMES option was broken.
-
-Revise jerror.h/jerror.c for more flexibility in message table.
-
-Repair oversight in jmemname.c NO_MKTEMP case: file could be there
-but unreadable.
-
-
-Version 5 24-Sep-94
---------------------
-
-Version 5 represents a nearly complete redesign and rewrite of the IJG
-software. Major user-visible changes include:
- * Automatic configuration simplifies installation for most Unix systems.
- * A range of speed vs. image quality tradeoffs are supported.
- This includes resizing of an image during decompression: scaling down
- by a factor of 1/2, 1/4, or 1/8 is handled very efficiently.
- * New programs rdjpgcom and wrjpgcom allow insertion and extraction
- of text comments in a JPEG file.
-
-The application programmer's interface to the library has changed completely.
-Notable improvements include:
- * We have eliminated the use of callback routines for handling the
- uncompressed image data. The application now sees the library as a
- set of routines that it calls to read or write image data on a
- scanline-by-scanline basis.
- * The application image data is represented in a conventional interleaved-
- pixel format, rather than as a separate array for each color channel.
- This can save a copying step in many programs.
- * The handling of compressed data has been cleaned up: the application can
- supply routines to source or sink the compressed data. It is possible to
- suspend processing on source/sink buffer overrun, although this is not
- supported in all operating modes.
- * All static state has been eliminated from the library, so that multiple
- instances of compression or decompression can be active concurrently.
- * JPEG abbreviated datastream formats are supported, ie, quantization and
- Huffman tables can be stored separately from the image data.
- * And not only that, but the documentation of the library has improved
- considerably!
-
-
-The last widely used release before the version 5 rewrite was version 4A of
-18-Feb-93. Change logs before that point have been discarded, since they
-are not of much interest after the rewrite.
diff --git a/libjpegtwrp/cjpeg.1 b/libjpegtwrp/cjpeg.1
deleted file mode 100644
index d175a961c..000000000
--- a/libjpegtwrp/cjpeg.1
+++ /dev/null
@@ -1,292 +0,0 @@
-.TH CJPEG 1 "20 March 1998"
-.SH NAME
-cjpeg \- compress an image file to a JPEG file
-.SH SYNOPSIS
-.B cjpeg
-[
-.I options
-]
-[
-.I filename
-]
-.LP
-.SH DESCRIPTION
-.LP
-.B cjpeg
-compresses the named image file, or the standard input if no file is
-named, and produces a JPEG/JFIF file on the standard output.
-The currently supported input file formats are: PPM (PBMPLUS color
-format), PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster
-Toolkit format). (RLE is supported only if the URT library is available.)
-.SH OPTIONS
-All switch names may be abbreviated; for example,
-.B \-grayscale
-may be written
-.B \-gray
-or
-.BR \-gr .
-Most of the "basic" switches can be abbreviated to as little as one letter.
-Upper and lower case are equivalent (thus
-.B \-BMP
-is the same as
-.BR \-bmp ).
-British spellings are also accepted (e.g.,
-.BR \-greyscale ),
-though for brevity these are not mentioned below.
-.PP
-The basic switches are:
-.TP
-.BI \-quality " N"
-Scale quantization tables to adjust image quality. Quality is 0 (worst) to
-100 (best); default is 75. (See below for more info.)
-.TP
-.B \-grayscale
-Create monochrome JPEG file from color input. Be sure to use this switch when
-compressing a grayscale BMP file, because
-.B cjpeg
-isn't bright enough to notice whether a BMP file uses only shades of gray.
-By saying
-.BR \-grayscale ,
-you'll get a smaller JPEG file that takes less time to process.
-.TP
-.B \-optimize
-Perform optimization of entropy encoding parameters. Without this, default
-encoding parameters are used.
-.B \-optimize
-usually makes the JPEG file a little smaller, but
-.B cjpeg
-runs somewhat slower and needs much more memory. Image quality and speed of
-decompression are unaffected by
-.BR \-optimize .
-.TP
-.B \-progressive
-Create progressive JPEG file (see below).
-.TP
-.B \-targa
-Input file is Targa format. Targa files that contain an "identification"
-field will not be automatically recognized by
-.BR cjpeg ;
-for such files you must specify
-.B \-targa
-to make
-.B cjpeg
-treat the input as Targa format.
-For most Targa files, you won't need this switch.
-.PP
-The
-.B \-quality
-switch lets you trade off compressed file size against quality of the
-reconstructed image: the higher the quality setting, the larger the JPEG file,
-and the closer the output image will be to the original input. Normally you
-want to use the lowest quality setting (smallest file) that decompresses into
-something visually indistinguishable from the original image. For this
-purpose the quality setting should be between 50 and 95; the default of 75 is
-often about right. If you see defects at
-.B \-quality
-75, then go up 5 or 10 counts at a time until you are happy with the output
-image. (The optimal setting will vary from one image to another.)
-.PP
-.B \-quality
-100 will generate a quantization table of all 1's, minimizing loss in the
-quantization step (but there is still information loss in subsampling, as well
-as roundoff error). This setting is mainly of interest for experimental
-purposes. Quality values above about 95 are
-.B not
-recommended for normal use; the compressed file size goes up dramatically for
-hardly any gain in output image quality.
-.PP
-In the other direction, quality values below 50 will produce very small files
-of low image quality. Settings around 5 to 10 might be useful in preparing an
-index of a large image library, for example. Try
-.B \-quality
-2 (or so) for some amusing Cubist effects. (Note: quality
-values below about 25 generate 2-byte quantization tables, which are
-considered optional in the JPEG standard.
-.B cjpeg
-emits a warning message when you give such a quality value, because some
-other JPEG programs may be unable to decode the resulting file. Use
-.B \-baseline
-if you need to ensure compatibility at low quality values.)
-.PP
-The
-.B \-progressive
-switch creates a "progressive JPEG" file. In this type of JPEG file, the data
-is stored in multiple scans of increasing quality. If the file is being
-transmitted over a slow communications link, the decoder can use the first
-scan to display a low-quality image very quickly, and can then improve the
-display with each subsequent scan. The final image is exactly equivalent to a
-standard JPEG file of the same quality setting, and the total file size is
-about the same --- often a little smaller.
-.B Caution:
-progressive JPEG is not yet widely implemented, so many decoders will be
-unable to view a progressive JPEG file at all.
-.PP
-Switches for advanced users:
-.TP
-.B \-dct int
-Use integer DCT method (default).
-.TP
-.B \-dct fast
-Use fast integer DCT (less accurate).
-.TP
-.B \-dct float
-Use floating-point DCT method.
-The float method is very slightly more accurate than the int method, but is
-much slower unless your machine has very fast floating-point hardware. Also
-note that results of the floating-point method may vary slightly across
-machines, while the integer methods should give the same results everywhere.
-The fast integer method is much less accurate than the other two.
-.TP
-.BI \-restart " N"
-Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is
-attached to the number.
-.B \-restart 0
-(the default) means no restart markers.
-.TP
-.BI \-smooth " N"
-Smooth the input image to eliminate dithering noise. N, ranging from 1 to
-100, indicates the strength of smoothing. 0 (the default) means no smoothing.
-.TP
-.BI \-maxmemory " N"
-Set limit for amount of memory to use in processing large images. Value is
-in thousands of bytes, or millions of bytes if "M" is attached to the
-number. For example,
-.B \-max 4m
-selects 4000000 bytes. If more space is needed, temporary files will be used.
-.TP
-.BI \-outfile " name"
-Send output image to the named file, not to standard output.
-.TP
-.B \-verbose
-Enable debug printout. More
-.BR \-v 's
-give more output. Also, version information is printed at startup.
-.TP
-.B \-debug
-Same as
-.BR \-verbose .
-.PP
-The
-.B \-restart
-option inserts extra markers that allow a JPEG decoder to resynchronize after
-a transmission error. Without restart markers, any damage to a compressed
-file will usually ruin the image from the point of the error to the end of the
-image; with restart markers, the damage is usually confined to the portion of
-the image up to the next restart marker. Of course, the restart markers
-occupy extra space. We recommend
-.B \-restart 1
-for images that will be transmitted across unreliable networks such as Usenet.
-.PP
-The
-.B \-smooth
-option filters the input to eliminate fine-scale noise. This is often useful
-when converting dithered images to JPEG: a moderate smoothing factor of 10 to
-50 gets rid of dithering patterns in the input file, resulting in a smaller
-JPEG file and a better-looking image. Too large a smoothing factor will
-visibly blur the image, however.
-.PP
-Switches for wizards:
-.TP
-.B \-baseline
-Force baseline-compatible quantization tables to be generated. This clamps
-quantization values to 8 bits even at low quality settings. (This switch is
-poorly named, since it does not ensure that the output is actually baseline
-JPEG. For example, you can use
-.B \-baseline
-and
-.B \-progressive
-together.)
-.TP
-.BI \-qtables " file"
-Use the quantization tables given in the specified text file.
-.TP
-.BI \-qslots " N[,...]"
-Select which quantization table to use for each color component.
-.TP
-.BI \-sample " HxV[,...]"
-Set JPEG sampling factors for each color component.
-.TP
-.BI \-scans " file"
-Use the scan script given in the specified text file.
-.PP
-The "wizard" switches are intended for experimentation with JPEG. If you
-don't know what you are doing, \fBdon't use them\fR. These switches are
-documented further in the file wizard.doc.
-.SH EXAMPLES
-.LP
-This example compresses the PPM file foo.ppm with a quality factor of
-60 and saves the output as foo.jpg:
-.IP
-.B cjpeg \-quality
-.I 60 foo.ppm
-.B >
-.I foo.jpg
-.SH HINTS
-Color GIF files are not the ideal input for JPEG; JPEG is really intended for
-compressing full-color (24-bit) images. In particular, don't try to convert
-cartoons, line drawings, and other images that have only a few distinct
-colors. GIF works great on these, JPEG does not. If you want to convert a
-GIF to JPEG, you should experiment with
-.BR cjpeg 's
-.B \-quality
-and
-.B \-smooth
-options to get a satisfactory conversion.
-.B \-smooth 10
-or so is often helpful.
-.PP
-Avoid running an image through a series of JPEG compression/decompression
-cycles. Image quality loss will accumulate; after ten or so cycles the image
-may be noticeably worse than it was after one cycle. It's best to use a
-lossless format while manipulating an image, then convert to JPEG format when
-you are ready to file the image away.
-.PP
-The
-.B \-optimize
-option to
-.B cjpeg
-is worth using when you are making a "final" version for posting or archiving.
-It's also a win when you are using low quality settings to make very small
-JPEG files; the percentage improvement is often a lot more than it is on
-larger files. (At present,
-.B \-optimize
-mode is always selected when generating progressive JPEG files.)
-.SH ENVIRONMENT
-.TP
-.B JPEGMEM
-If this environment variable is set, its value is the default memory limit.
-The value is specified as described for the
-.B \-maxmemory
-switch.
-.B JPEGMEM
-overrides the default value specified when the program was compiled, and
-itself is overridden by an explicit
-.BR \-maxmemory .
-.SH SEE ALSO
-.BR djpeg (1),
-.BR jpegtran (1),
-.BR rdjpgcom (1),
-.BR wrjpgcom (1)
-.br
-.BR ppm (5),
-.BR pgm (5)
-.br
-Wallace, Gregory K. "The JPEG Still Picture Compression Standard",
-Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
-.SH AUTHOR
-Independent JPEG Group
-.SH BUGS
-Arithmetic coding is not supported for legal reasons.
-.PP
-GIF input files are no longer supported, to avoid the Unisys LZW patent.
-Use a Unisys-licensed program if you need to read a GIF file. (Conversion
-of GIF files to JPEG is usually a bad idea anyway.)
-.PP
-Not all variants of BMP and Targa file formats are supported.
-.PP
-The
-.B \-targa
-switch is not a bug, it's a feature. (It would be a bug if the Targa format
-designers had not been clueless.)
-.PP
-Still not as fast as we'd like.
diff --git a/libjpegtwrp/cjpeg.c b/libjpegtwrp/cjpeg.c
deleted file mode 100644
index f2a929f0c..000000000
--- a/libjpegtwrp/cjpeg.c
+++ /dev/null
@@ -1,606 +0,0 @@
-/*
- * cjpeg.c
- *
- * Copyright (C) 1991-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a command-line user interface for the JPEG compressor.
- * It should work on any system with Unix- or MS-DOS-style command lines.
- *
- * Two different command line styles are permitted, depending on the
- * compile-time switch TWO_FILE_COMMANDLINE:
- * cjpeg [options] inputfile outputfile
- * cjpeg [options] [inputfile]
- * In the second style, output is always to standard output, which you'd
- * normally redirect to a file or pipe to some other program. Input is
- * either from a named file or from standard input (typically redirected).
- * The second style is convenient on Unix but is unhelpful on systems that
- * don't support pipes. Also, you MUST use the first style if your system
- * doesn't do binary I/O to stdin/stdout.
- * To simplify script writing, the "-outfile" switch is provided. The syntax
- * cjpeg [options] -outfile outputfile inputfile
- * works regardless of which command line style is used.
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-#include "jversion.h" /* for version message */
-
-#ifdef USE_CCOMMAND /* command-line reader for Macintosh */
-#ifdef __MWERKS__
-#include <SIOUX.h> /* Metrowerks needs this */
-#include <console.h> /* ... and this */
-#endif
-#ifdef THINK_C
-#include <console.h> /* Think declares it here */
-#endif
-#endif
-
-
-/* Create the add-on message string table. */
-
-#define JMESSAGE(code,string) string ,
-
-static const char * const cdjpeg_message_table[] = {
-#include "cderror.h"
- NULL
-};
-
-
-/*
- * This routine determines what format the input file is,
- * and selects the appropriate input-reading module.
- *
- * To determine which family of input formats the file belongs to,
- * we may look only at the first byte of the file, since C does not
- * guarantee that more than one character can be pushed back with ungetc.
- * Looking at additional bytes would require one of these approaches:
- * 1) assume we can fseek() the input file (fails for piped input);
- * 2) assume we can push back more than one character (works in
- * some C implementations, but unportable);
- * 3) provide our own buffering (breaks input readers that want to use
- * stdio directly, such as the RLE library);
- * or 4) don't put back the data, and modify the input_init methods to assume
- * they start reading after the start of file (also breaks RLE library).
- * #1 is attractive for MS-DOS but is untenable on Unix.
- *
- * The most portable solution for file types that can't be identified by their
- * first byte is to make the user tell us what they are. This is also the
- * only approach for "raw" file types that contain only arbitrary values.
- * We presently apply this method for Targa files. Most of the time Targa
- * files start with 0x00, so we recognize that case. Potentially, however,
- * a Targa file could start with any byte value (byte 0 is the length of the
- * seldom-used ID field), so we provide a switch to force Targa input mode.
- */
-
-static boolean is_targa; /* records user -targa switch */
-
-
-LOCAL(cjpeg_source_ptr)
-select_file_type (j_compress_ptr cinfo, FILE * infile)
-{
- int c;
-
- if (is_targa) {
-#ifdef TARGA_SUPPORTED
- return jinit_read_targa(cinfo);
-#else
- ERREXIT(cinfo, JERR_TGA_NOTCOMP);
-#endif
- }
-
- if ((c = getc(infile)) == EOF)
- ERREXIT(cinfo, JERR_INPUT_EMPTY);
- if (ungetc(c, infile) == EOF)
- ERREXIT(cinfo, JERR_UNGETC_FAILED);
-
- switch (c) {
-#ifdef BMP_SUPPORTED
- case 'B':
- return jinit_read_bmp(cinfo);
-#endif
-#ifdef GIF_SUPPORTED
- case 'G':
- return jinit_read_gif(cinfo);
-#endif
-#ifdef PPM_SUPPORTED
- case 'P':
- return jinit_read_ppm(cinfo);
-#endif
-#ifdef RLE_SUPPORTED
- case 'R':
- return jinit_read_rle(cinfo);
-#endif
-#ifdef TARGA_SUPPORTED
- case 0x00:
- return jinit_read_targa(cinfo);
-#endif
- default:
- ERREXIT(cinfo, JERR_UNKNOWN_FORMAT);
- break;
- }
-
- return NULL; /* suppress compiler warnings */
-}
-
-
-/*
- * Argument-parsing code.
- * The switch parser is designed to be useful with DOS-style command line
- * syntax, ie, intermixed switches and file names, where only the switches
- * to the left of a given file name affect processing of that file.
- * The main program in this file doesn't actually use this capability...
- */
-
-
-static const char * progname; /* program name for error messages */
-static char * outfilename; /* for -outfile switch */
-
-
-LOCAL(void)
-usage (void)
-/* complain about bad command line */
-{
- fprintf(stderr, "usage: %s [switches] ", progname);
-#ifdef TWO_FILE_COMMANDLINE
- fprintf(stderr, "inputfile outputfile\n");
-#else
- fprintf(stderr, "[inputfile]\n");
-#endif
-
- fprintf(stderr, "Switches (names may be abbreviated):\n");
- fprintf(stderr, " -quality N Compression quality (0..100; 5-95 is useful range)\n");
- fprintf(stderr, " -grayscale Create monochrome JPEG file\n");
-#ifdef ENTROPY_OPT_SUPPORTED
- fprintf(stderr, " -optimize Optimize Huffman table (smaller file, but slow compression)\n");
-#endif
-#ifdef C_PROGRESSIVE_SUPPORTED
- fprintf(stderr, " -progressive Create progressive JPEG file\n");
-#endif
-#ifdef TARGA_SUPPORTED
- fprintf(stderr, " -targa Input file is Targa format (usually not needed)\n");
-#endif
- fprintf(stderr, "Switches for advanced users:\n");
-#ifdef DCT_ISLOW_SUPPORTED
- fprintf(stderr, " -dct int Use integer DCT method%s\n",
- (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
-#endif
-#ifdef DCT_IFAST_SUPPORTED
- fprintf(stderr, " -dct fast Use fast integer DCT (less accurate)%s\n",
- (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
- fprintf(stderr, " -dct float Use floating-point DCT method%s\n",
- (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
-#endif
- fprintf(stderr, " -restart N Set restart interval in rows, or in blocks with B\n");
-#ifdef INPUT_SMOOTHING_SUPPORTED
- fprintf(stderr, " -smooth N Smooth dithered input (N=1..100 is strength)\n");
-#endif
- fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n");
- fprintf(stderr, " -outfile name Specify name for output file\n");
- fprintf(stderr, " -verbose or -debug Emit debug output\n");
- fprintf(stderr, "Switches for wizards:\n");
-#ifdef C_ARITH_CODING_SUPPORTED
- fprintf(stderr, " -arithmetic Use arithmetic coding\n");
-#endif
- fprintf(stderr, " -baseline Force baseline quantization tables\n");
- fprintf(stderr, " -qtables file Use quantization tables given in file\n");
- fprintf(stderr, " -qslots N[,...] Set component quantization tables\n");
- fprintf(stderr, " -sample HxV[,...] Set component sampling factors\n");
-#ifdef C_MULTISCAN_FILES_SUPPORTED
- fprintf(stderr, " -scans file Create multi-scan JPEG per script file\n");
-#endif
- exit(EXIT_FAILURE);
-}
-
-
-LOCAL(int)
-parse_switches (j_compress_ptr cinfo, int argc, char **argv,
- int last_file_arg_seen, boolean for_real)
-/* Parse optional switches.
- * Returns argv[] index of first file-name argument (== argc if none).
- * Any file names with indexes <= last_file_arg_seen are ignored;
- * they have presumably been processed in a previous iteration.
- * (Pass 0 for last_file_arg_seen on the first or only iteration.)
- * for_real is FALSE on the first (dummy) pass; we may skip any expensive
- * processing.
- */
-{
- int argn;
- char * arg;
- int quality; /* -quality parameter */
- int q_scale_factor; /* scaling percentage for -qtables */
- boolean force_baseline;
- boolean simple_progressive;
- char * qtablefile = NULL; /* saves -qtables filename if any */
- char * qslotsarg = NULL; /* saves -qslots parm if any */
- char * samplearg = NULL; /* saves -sample parm if any */
- char * scansarg = NULL; /* saves -scans parm if any */
-
- /* Set up default JPEG parameters. */
- /* Note that default -quality level need not, and does not,
- * match the default scaling for an explicit -qtables argument.
- */
- quality = 75; /* default -quality value */
- q_scale_factor = 100; /* default to no scaling for -qtables */
- force_baseline = FALSE; /* by default, allow 16-bit quantizers */
- simple_progressive = FALSE;
- is_targa = FALSE;
- outfilename = NULL;
- cinfo->err->trace_level = 0;
-
- /* Scan command line options, adjust parameters */
-
- for (argn = 1; argn < argc; argn++) {
- arg = argv[argn];
- if (*arg != '-') {
- /* Not a switch, must be a file name argument */
- if (argn <= last_file_arg_seen) {
- outfilename = NULL; /* -outfile applies to just one input file */
- continue; /* ignore this name if previously processed */
- }
- break; /* else done parsing switches */
- }
- arg++; /* advance past switch marker character */
-
- if (keymatch(arg, "arithmetic", 1)) {
- /* Use arithmetic coding. */
-#ifdef C_ARITH_CODING_SUPPORTED
- cinfo->arith_code = TRUE;
-#else
- fprintf(stderr, "%s: sorry, arithmetic coding not supported\n",
- progname);
- exit(EXIT_FAILURE);
-#endif
-
- } else if (keymatch(arg, "baseline", 1)) {
- /* Force baseline-compatible output (8-bit quantizer values). */
- force_baseline = TRUE;
-
- } else if (keymatch(arg, "dct", 2)) {
- /* Select DCT algorithm. */
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (keymatch(argv[argn], "int", 1)) {
- cinfo->dct_method = JDCT_ISLOW;
- } else if (keymatch(argv[argn], "fast", 2)) {
- cinfo->dct_method = JDCT_IFAST;
- } else if (keymatch(argv[argn], "float", 2)) {
- cinfo->dct_method = JDCT_FLOAT;
- } else
- usage();
-
- } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
- /* Enable debug printouts. */
- /* On first -d, print version identification */
- static boolean printed_version = FALSE;
-
- if (! printed_version) {
- fprintf(stderr, "Independent JPEG Group's CJPEG, version %s\n%s\n",
- JVERSION, JCOPYRIGHT);
- printed_version = TRUE;
- }
- cinfo->err->trace_level++;
-
- } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) {
- /* Force a monochrome JPEG file to be generated. */
- jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
-
- } else if (keymatch(arg, "maxmemory", 3)) {
- /* Maximum memory in Kb (or Mb with 'm'). */
- long lval;
- char ch = 'x';
-
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
- usage();
- if (ch == 'm' || ch == 'M')
- lval *= 1000L;
- cinfo->mem->max_memory_to_use = lval * 1000L;
-
- } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
- /* Enable entropy parm optimization. */
-#ifdef ENTROPY_OPT_SUPPORTED
- cinfo->optimize_coding = TRUE;
-#else
- fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n",
- progname);
- exit(EXIT_FAILURE);
-#endif
-
- } else if (keymatch(arg, "outfile", 4)) {
- /* Set output file name. */
- if (++argn >= argc) /* advance to next argument */
- usage();
- outfilename = argv[argn]; /* save it away for later use */
-
- } else if (keymatch(arg, "progressive", 1)) {
- /* Select simple progressive mode. */
-#ifdef C_PROGRESSIVE_SUPPORTED
- simple_progressive = TRUE;
- /* We must postpone execution until num_components is known. */
-#else
- fprintf(stderr, "%s: sorry, progressive output was not compiled\n",
- progname);
- exit(EXIT_FAILURE);
-#endif
-
- } else if (keymatch(arg, "quality", 1)) {
- /* Quality factor (quantization table scaling factor). */
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (sscanf(argv[argn], "%d", &quality) != 1)
- usage();
- /* Change scale factor in case -qtables is present. */
- q_scale_factor = jpeg_quality_scaling(quality);
-
- } else if (keymatch(arg, "qslots", 2)) {
- /* Quantization table slot numbers. */
- if (++argn >= argc) /* advance to next argument */
- usage();
- qslotsarg = argv[argn];
- /* Must delay setting qslots until after we have processed any
- * colorspace-determining switches, since jpeg_set_colorspace sets
- * default quant table numbers.
- */
-
- } else if (keymatch(arg, "qtables", 2)) {
- /* Quantization tables fetched from file. */
- if (++argn >= argc) /* advance to next argument */
- usage();
- qtablefile = argv[argn];
- /* We postpone actually reading the file in case -quality comes later. */
-
- } else if (keymatch(arg, "restart", 1)) {
- /* Restart interval in MCU rows (or in MCUs with 'b'). */
- long lval;
- char ch = 'x';
-
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
- usage();
- if (lval < 0 || lval > 65535L)
- usage();
- if (ch == 'b' || ch == 'B') {
- cinfo->restart_interval = (unsigned int) lval;
- cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */
- } else {
- cinfo->restart_in_rows = (int) lval;
- /* restart_interval will be computed during startup */
- }
-
- } else if (keymatch(arg, "sample", 2)) {
- /* Set sampling factors. */
- if (++argn >= argc) /* advance to next argument */
- usage();
- samplearg = argv[argn];
- /* Must delay setting sample factors until after we have processed any
- * colorspace-determining switches, since jpeg_set_colorspace sets
- * default sampling factors.
- */
-
- } else if (keymatch(arg, "scans", 2)) {
- /* Set scan script. */
-#ifdef C_MULTISCAN_FILES_SUPPORTED
- if (++argn >= argc) /* advance to next argument */
- usage();
- scansarg = argv[argn];
- /* We must postpone reading the file in case -progressive appears. */
-#else
- fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n",
- progname);
- exit(EXIT_FAILURE);
-#endif
-
- } else if (keymatch(arg, "smooth", 2)) {
- /* Set input smoothing factor. */
- int val;
-
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (sscanf(argv[argn], "%d", &val) != 1)
- usage();
- if (val < 0 || val > 100)
- usage();
- cinfo->smoothing_factor = val;
-
- } else if (keymatch(arg, "targa", 1)) {
- /* Input file is Targa format. */
- is_targa = TRUE;
-
- } else {
- usage(); /* bogus switch */
- }
- }
-
- /* Post-switch-scanning cleanup */
-
- if (for_real) {
-
- /* Set quantization tables for selected quality. */
- /* Some or all may be overridden if -qtables is present. */
- jpeg_set_quality(cinfo, quality, force_baseline);
-
- if (qtablefile != NULL) /* process -qtables if it was present */
- if (! read_quant_tables(cinfo, qtablefile,
- q_scale_factor, force_baseline))
- usage();
-
- if (qslotsarg != NULL) /* process -qslots if it was present */
- if (! set_quant_slots(cinfo, qslotsarg))
- usage();
-
- if (samplearg != NULL) /* process -sample if it was present */
- if (! set_sample_factors(cinfo, samplearg))
- usage();
-
-#ifdef C_PROGRESSIVE_SUPPORTED
- if (simple_progressive) /* process -progressive; -scans can override */
- jpeg_simple_progression(cinfo);
-#endif
-
-#ifdef C_MULTISCAN_FILES_SUPPORTED
- if (scansarg != NULL) /* process -scans if it was present */
- if (! read_scan_script(cinfo, scansarg))
- usage();
-#endif
- }
-
- return argn; /* return index of next arg (file name) */
-}
-
-
-/*
- * The main program.
- */
-
-int
-main (int argc, char **argv)
-{
- struct jpeg_compress_struct cinfo;
- struct jpeg_error_mgr jerr;
-#ifdef PROGRESS_REPORT
- struct cdjpeg_progress_mgr progress;
-#endif
- int file_index;
- cjpeg_source_ptr src_mgr;
- FILE * input_file;
- FILE * output_file;
- JDIMENSION num_scanlines;
-
- /* On Mac, fetch a command line. */
-#ifdef USE_CCOMMAND
- argc = ccommand(&argv);
-#endif
-
- progname = argv[0];
- if (progname == NULL || progname[0] == 0)
- progname = "cjpeg"; /* in case C library doesn't provide it */
-
- /* Initialize the JPEG compression object with default error handling. */
- cinfo.err = jpeg_std_error(&jerr);
- jpeg_create_compress(&cinfo);
- /* Add some application-specific error messages (from cderror.h) */
- jerr.addon_message_table = cdjpeg_message_table;
- jerr.first_addon_message = JMSG_FIRSTADDONCODE;
- jerr.last_addon_message = JMSG_LASTADDONCODE;
-
- /* Now safe to enable signal catcher. */
-#ifdef NEED_SIGNAL_CATCHER
- enable_signal_catcher((j_common_ptr) &cinfo);
-#endif
-
- /* Initialize JPEG parameters.
- * Much of this may be overridden later.
- * In particular, we don't yet know the input file's color space,
- * but we need to provide some value for jpeg_set_defaults() to work.
- */
-
- cinfo.in_color_space = JCS_RGB; /* arbitrary guess */
- jpeg_set_defaults(&cinfo);
-
- /* Scan command line to find file names.
- * It is convenient to use just one switch-parsing routine, but the switch
- * values read here are ignored; we will rescan the switches after opening
- * the input file.
- */
-
- file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
-
-#ifdef TWO_FILE_COMMANDLINE
- /* Must have either -outfile switch or explicit output file name */
- if (outfilename == NULL) {
- if (file_index != argc-2) {
- fprintf(stderr, "%s: must name one input and one output file\n",
- progname);
- usage();
- }
- outfilename = argv[file_index+1];
- } else {
- if (file_index != argc-1) {
- fprintf(stderr, "%s: must name one input and one output file\n",
- progname);
- usage();
- }
- }
-#else
- /* Unix style: expect zero or one file name */
- if (file_index < argc-1) {
- fprintf(stderr, "%s: only one input file\n", progname);
- usage();
- }
-#endif /* TWO_FILE_COMMANDLINE */
-
- /* Open the input file. */
- if (file_index < argc) {
- if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
- fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
- exit(EXIT_FAILURE);
- }
- } else {
- /* default input file is stdin */
- input_file = read_stdin();
- }
-
- /* Open the output file. */
- if (outfilename != NULL) {
- if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
- fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
- exit(EXIT_FAILURE);
- }
- } else {
- /* default output file is stdout */
- output_file = write_stdout();
- }
-
-#ifdef PROGRESS_REPORT
- start_progress_monitor((j_common_ptr) &cinfo, &progress);
-#endif
-
- /* Figure out the input file format, and set up to read it. */
- src_mgr = select_file_type(&cinfo, input_file);
- src_mgr->input_file = input_file;
-
- /* Read the input file header to obtain file size & colorspace. */
- (*src_mgr->start_input) (&cinfo, src_mgr);
-
- /* Now that we know input colorspace, fix colorspace-dependent defaults */
- jpeg_default_colorspace(&cinfo);
-
- /* Adjust default compression parameters by re-parsing the options */
- file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
-
- /* Specify data destination for compression */
- jpeg_stdio_dest(&cinfo, output_file);
-
- /* Start compressor */
- jpeg_start_compress(&cinfo, TRUE);
-
- /* Process data */
- while (cinfo.next_scanline < cinfo.image_height) {
- num_scanlines = (*src_mgr->get_pixel_rows) (&cinfo, src_mgr);
- (void) jpeg_write_scanlines(&cinfo, src_mgr->buffer, num_scanlines);
- }
-
- /* Finish compression and release memory */
- (*src_mgr->finish_input) (&cinfo, src_mgr);
- jpeg_finish_compress(&cinfo);
- jpeg_destroy_compress(&cinfo);
-
- /* Close files, if we opened them */
- if (input_file != stdin)
- fclose(input_file);
- if (output_file != stdout)
- fclose(output_file);
-
-#ifdef PROGRESS_REPORT
- end_progress_monitor((j_common_ptr) &cinfo);
-#endif
-
- /* All done. */
- exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
- return 0; /* suppress no-return-value warnings */
-}
diff --git a/libjpegtwrp/ckconfig.c b/libjpegtwrp/ckconfig.c
deleted file mode 100644
index 34baf795b..000000000
--- a/libjpegtwrp/ckconfig.c
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
- * ckconfig.c
- *
- * Copyright (C) 1991-1994, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- */
-
-/*
- * This program is intended to help you determine how to configure the JPEG
- * software for installation on a particular system. The idea is to try to
- * compile and execute this program. If your compiler fails to compile the
- * program, make changes as indicated in the comments below. Once you can
- * compile the program, run it, and it will produce a "jconfig.h" file for
- * your system.
- *
- * As a general rule, each time you try to compile this program,
- * pay attention only to the *first* error message you get from the compiler.
- * Many C compilers will issue lots of spurious error messages once they
- * have gotten confused. Go to the line indicated in the first error message,
- * and read the comments preceding that line to see what to change.
- *
- * Almost all of the edits you may need to make to this program consist of
- * changing a line that reads "#define SOME_SYMBOL" to "#undef SOME_SYMBOL",
- * or vice versa. This is called defining or undefining that symbol.
- */
-
-
-/* First we must see if your system has the include files we need.
- * We start out with the assumption that your system has all the ANSI-standard
- * include files. If you get any error trying to include one of these files,
- * undefine the corresponding HAVE_xxx symbol.
- */
-
-#define HAVE_STDDEF_H /* replace 'define' by 'undef' if error here */
-#ifdef HAVE_STDDEF_H /* next line will be skipped if you undef... */
-#include <stddef.h>
-#endif
-
-#define HAVE_STDLIB_H /* same thing for stdlib.h */
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-
-#include <stdio.h> /* If you ain't got this, you ain't got C. */
-
-/* We have to see if your string functions are defined by
- * strings.h (old BSD convention) or string.h (everybody else).
- * We try the non-BSD convention first; define NEED_BSD_STRINGS
- * if the compiler says it can't find string.h.
- */
-
-#undef NEED_BSD_STRINGS
-
-#ifdef NEED_BSD_STRINGS
-#include <strings.h>
-#else
-#include <string.h>
-#endif
-
-/* On some systems (especially older Unix machines), type size_t is
- * defined only in the include file <sys/types.h>. If you get a failure
- * on the size_t test below, try defining NEED_SYS_TYPES_H.
- */
-
-#undef NEED_SYS_TYPES_H /* start by assuming we don't need it */
-#ifdef NEED_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-
-
-/* Usually type size_t is defined in one of the include files we've included
- * above. If not, you'll get an error on the "typedef size_t my_size_t;" line.
- * In that case, first try defining NEED_SYS_TYPES_H just above.
- * If that doesn't work, you'll have to search through your system library
- * to figure out which include file defines "size_t". Look for a line that
- * says "typedef something-or-other size_t;". Then, change the line below
- * that says "#include <someincludefile.h>" to instead include the file
- * you found size_t in, and define NEED_SPECIAL_INCLUDE. If you can't find
- * type size_t anywhere, try replacing "#include <someincludefile.h>" with
- * "typedef unsigned int size_t;".
- */
-
-#undef NEED_SPECIAL_INCLUDE /* assume we DON'T need it, for starters */
-
-#ifdef NEED_SPECIAL_INCLUDE
-#include <someincludefile.h>
-#endif
-
-typedef size_t my_size_t; /* The payoff: do we have size_t now? */
-
-
-/* The next question is whether your compiler supports ANSI-style function
- * prototypes. You need to know this in order to choose between using
- * makefile.ansi and using makefile.unix.
- * The #define line below is set to assume you have ANSI function prototypes.
- * If you get an error in this group of lines, undefine HAVE_PROTOTYPES.
- */
-
-#define HAVE_PROTOTYPES
-
-#ifdef HAVE_PROTOTYPES
-int testfunction (int arg1, int * arg2); /* check prototypes */
-
-struct methods_struct { /* check method-pointer declarations */
- int (*error_exit) (char *msgtext);
- int (*trace_message) (char *msgtext);
- int (*another_method) (void);
-};
-
-int testfunction (int arg1, int * arg2) /* check definitions */
-{
- return arg2[arg1];
-}
-
-int test2function (void) /* check void arg list */
-{
- return 0;
-}
-#endif
-
-
-/* Now we want to find out if your compiler knows what "unsigned char" means.
- * If you get an error on the "unsigned char un_char;" line,
- * then undefine HAVE_UNSIGNED_CHAR.
- */
-
-#define HAVE_UNSIGNED_CHAR
-
-#ifdef HAVE_UNSIGNED_CHAR
-unsigned char un_char;
-#endif
-
-
-/* Now we want to find out if your compiler knows what "unsigned short" means.
- * If you get an error on the "unsigned short un_short;" line,
- * then undefine HAVE_UNSIGNED_SHORT.
- */
-
-#define HAVE_UNSIGNED_SHORT
-
-#ifdef HAVE_UNSIGNED_SHORT
-unsigned short un_short;
-#endif
-
-
-/* Now we want to find out if your compiler understands type "void".
- * If you get an error anywhere in here, undefine HAVE_VOID.
- */
-
-#define HAVE_VOID
-
-#ifdef HAVE_VOID
-/* Caution: a C++ compiler will insist on complete prototypes */
-typedef void * void_ptr; /* check void * */
-#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */
-typedef void (*void_func) (int a, int b);
-#else
-typedef void (*void_func) ();
-#endif
-
-#ifdef HAVE_PROTOTYPES /* check void function result */
-void test3function (void_ptr arg1, void_func arg2)
-#else
-void test3function (arg1, arg2)
- void_ptr arg1;
- void_func arg2;
-#endif
-{
- char * locptr = (char *) arg1; /* check casting to and from void * */
- arg1 = (void *) locptr;
- (*arg2) (1, 2); /* check call of fcn returning void */
-}
-#endif
-
-
-/* Now we want to find out if your compiler knows what "const" means.
- * If you get an error here, undefine HAVE_CONST.
- */
-
-#define HAVE_CONST
-
-#ifdef HAVE_CONST
-static const int carray[3] = {1, 2, 3};
-
-#ifdef HAVE_PROTOTYPES
-int test4function (const int arg1)
-#else
-int test4function (arg1)
- const int arg1;
-#endif
-{
- return carray[arg1];
-}
-#endif
-
-
-/* If you get an error or warning about this structure definition,
- * define INCOMPLETE_TYPES_BROKEN.
- */
-
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifndef INCOMPLETE_TYPES_BROKEN
-typedef struct undefined_structure * undef_struct_ptr;
-#endif
-
-
-/* If you get an error about duplicate names,
- * define NEED_SHORT_EXTERNAL_NAMES.
- */
-
-#undef NEED_SHORT_EXTERNAL_NAMES
-
-#ifndef NEED_SHORT_EXTERNAL_NAMES
-
-int possibly_duplicate_function ()
-{
- return 0;
-}
-
-int possibly_dupli_function ()
-{
- return 1;
-}
-
-#endif
-
-
-
-/************************************************************************
- * OK, that's it. You should not have to change anything beyond this
- * point in order to compile and execute this program. (You might get
- * some warnings, but you can ignore them.)
- * When you run the program, it will make a couple more tests that it
- * can do automatically, and then it will create jconfig.h and print out
- * any additional suggestions it has.
- ************************************************************************
- */
-
-
-#ifdef HAVE_PROTOTYPES
-int is_char_signed (int arg)
-#else
-int is_char_signed (arg)
- int arg;
-#endif
-{
- if (arg == 189) { /* expected result for unsigned char */
- return 0; /* type char is unsigned */
- }
- else if (arg != -67) { /* expected result for signed char */
- printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n");
- printf("I fear the JPEG software will not work at all.\n\n");
- }
- return 1; /* assume char is signed otherwise */
-}
-
-
-#ifdef HAVE_PROTOTYPES
-int is_shifting_signed (long arg)
-#else
-int is_shifting_signed (arg)
- long arg;
-#endif
-/* See whether right-shift on a long is signed or not. */
-{
- long res = arg >> 4;
-
- if (res == -0x7F7E80CL) { /* expected result for signed shift */
- return 1; /* right shift is signed */
- }
- /* see if unsigned-shift hack will fix it. */
- /* we can't just test exact value since it depends on width of long... */
- res |= (~0L) << (32-4);
- if (res == -0x7F7E80CL) { /* expected result now? */
- return 0; /* right shift is unsigned */
- }
- printf("Right shift isn't acting as I expect it to.\n");
- printf("I fear the JPEG software will not work at all.\n\n");
- return 0; /* try it with unsigned anyway */
-}
-
-
-#ifdef HAVE_PROTOTYPES
-int main (int argc, char ** argv)
-#else
-int main (argc, argv)
- int argc;
- char ** argv;
-#endif
-{
- char signed_char_check = (char) (-67);
- FILE *outfile;
-
- /* Attempt to write jconfig.h */
- if ((outfile = fopen("jconfig.h", "w")) == NULL) {
- printf("Failed to write jconfig.h\n");
- return 1;
- }
-
- /* Write out all the info */
- fprintf(outfile, "/* jconfig.h --- generated by ckconfig.c */\n");
- fprintf(outfile, "/* see jconfig.doc for explanations */\n\n");
-#ifdef HAVE_PROTOTYPES
- fprintf(outfile, "#define HAVE_PROTOTYPES\n");
-#else
- fprintf(outfile, "#undef HAVE_PROTOTYPES\n");
-#endif
-#ifdef HAVE_UNSIGNED_CHAR
- fprintf(outfile, "#define HAVE_UNSIGNED_CHAR\n");
-#else
- fprintf(outfile, "#undef HAVE_UNSIGNED_CHAR\n");
-#endif
-#ifdef HAVE_UNSIGNED_SHORT
- fprintf(outfile, "#define HAVE_UNSIGNED_SHORT\n");
-#else
- fprintf(outfile, "#undef HAVE_UNSIGNED_SHORT\n");
-#endif
-#ifdef HAVE_VOID
- fprintf(outfile, "/* #define void char */\n");
-#else
- fprintf(outfile, "#define void char\n");
-#endif
-#ifdef HAVE_CONST
- fprintf(outfile, "/* #define const */\n");
-#else
- fprintf(outfile, "#define const\n");
-#endif
- if (is_char_signed((int) signed_char_check))
- fprintf(outfile, "#undef CHAR_IS_UNSIGNED\n");
- else
- fprintf(outfile, "#define CHAR_IS_UNSIGNED\n");
-#ifdef HAVE_STDDEF_H
- fprintf(outfile, "#define HAVE_STDDEF_H\n");
-#else
- fprintf(outfile, "#undef HAVE_STDDEF_H\n");
-#endif
-#ifdef HAVE_STDLIB_H
- fprintf(outfile, "#define HAVE_STDLIB_H\n");
-#else
- fprintf(outfile, "#undef HAVE_STDLIB_H\n");
-#endif
-#ifdef NEED_BSD_STRINGS
- fprintf(outfile, "#define NEED_BSD_STRINGS\n");
-#else
- fprintf(outfile, "#undef NEED_BSD_STRINGS\n");
-#endif
-#ifdef NEED_SYS_TYPES_H
- fprintf(outfile, "#define NEED_SYS_TYPES_H\n");
-#else
- fprintf(outfile, "#undef NEED_SYS_TYPES_H\n");
-#endif
- fprintf(outfile, "#undef NEED_FAR_POINTERS\n");
-#ifdef NEED_SHORT_EXTERNAL_NAMES
- fprintf(outfile, "#define NEED_SHORT_EXTERNAL_NAMES\n");
-#else
- fprintf(outfile, "#undef NEED_SHORT_EXTERNAL_NAMES\n");
-#endif
-#ifdef INCOMPLETE_TYPES_BROKEN
- fprintf(outfile, "#define INCOMPLETE_TYPES_BROKEN\n");
-#else
- fprintf(outfile, "#undef INCOMPLETE_TYPES_BROKEN\n");
-#endif
- fprintf(outfile, "\n#ifdef JPEG_INTERNALS\n\n");
- if (is_shifting_signed(-0x7F7E80B1L))
- fprintf(outfile, "#undef RIGHT_SHIFT_IS_UNSIGNED\n");
- else
- fprintf(outfile, "#define RIGHT_SHIFT_IS_UNSIGNED\n");
- fprintf(outfile, "\n#endif /* JPEG_INTERNALS */\n");
- fprintf(outfile, "\n#ifdef JPEG_CJPEG_DJPEG\n\n");
- fprintf(outfile, "#define BMP_SUPPORTED /* BMP image file format */\n");
- fprintf(outfile, "#define GIF_SUPPORTED /* GIF image file format */\n");
- fprintf(outfile, "#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */\n");
- fprintf(outfile, "#undef RLE_SUPPORTED /* Utah RLE image file format */\n");
- fprintf(outfile, "#define TARGA_SUPPORTED /* Targa image file format */\n\n");
- fprintf(outfile, "#undef TWO_FILE_COMMANDLINE /* You may need this on non-Unix systems */\n");
- fprintf(outfile, "#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */\n");
- fprintf(outfile, "#undef DONT_USE_B_MODE\n");
- fprintf(outfile, "/* #define PROGRESS_REPORT */ /* optional */\n");
- fprintf(outfile, "\n#endif /* JPEG_CJPEG_DJPEG */\n");
-
- /* Close the jconfig.h file */
- fclose(outfile);
-
- /* User report */
- printf("Configuration check for Independent JPEG Group's software done.\n");
- printf("\nI have written the jconfig.h file for you.\n\n");
-#ifdef HAVE_PROTOTYPES
- printf("You should use makefile.ansi as the starting point for your Makefile.\n");
-#else
- printf("You should use makefile.unix as the starting point for your Makefile.\n");
-#endif
-
-#ifdef NEED_SPECIAL_INCLUDE
- printf("\nYou'll need to change jconfig.h to include the system include file\n");
- printf("that you found type size_t in, or add a direct definition of type\n");
- printf("size_t if that's what you used. Just add it to the end.\n");
-#endif
-
- return 0;
-}
diff --git a/libjpegtwrp/coderules.doc b/libjpegtwrp/coderules.doc
deleted file mode 100644
index 0ab5d9bd3..000000000
--- a/libjpegtwrp/coderules.doc
+++ /dev/null
@@ -1,118 +0,0 @@
-IJG JPEG LIBRARY: CODING RULES
-
-Copyright (C) 1991-1996, Thomas G. Lane.
-This file is part of the Independent JPEG Group's software.
-For conditions of distribution and use, see the accompanying README file.
-
-
-Since numerous people will be contributing code and bug fixes, it's important
-to establish a common coding style. The goal of using similar coding styles
-is much more important than the details of just what that style is.
-
-In general we follow the recommendations of "Recommended C Style and Coding
-Standards" revision 6.1 (Cannon et al. as modified by Spencer, Keppel and
-Brader). This document is available in the IJG FTP archive (see
-jpeg/doc/cstyle.ms.tbl.Z, or cstyle.txt.Z for those without nroff/tbl).
-
-Block comments should be laid out thusly:
-
-/*
- * Block comments in this style.
- */
-
-We indent statements in K&R style, e.g.,
- if (test) {
- then-part;
- } else {
- else-part;
- }
-with two spaces per indentation level. (This indentation convention is
-handled automatically by GNU Emacs and many other text editors.)
-
-Multi-word names should be written in lower case with underscores, e.g.,
-multi_word_name (not multiWordName). Preprocessor symbols and enum constants
-are similar but upper case (MULTI_WORD_NAME). Names should be unique within
-the first fifteen characters. (On some older systems, global names must be
-unique within six characters. We accommodate this without cluttering the
-source code by using macros to substitute shorter names.)
-
-We use function prototypes everywhere; we rely on automatic source code
-transformation to feed prototype-less C compilers. Transformation is done
-by the simple and portable tool 'ansi2knr.c' (courtesy of Ghostscript).
-ansi2knr is not very bright, so it imposes a format requirement on function
-declarations: the function name MUST BEGIN IN COLUMN 1. Thus all functions
-should be written in the following style:
-
-LOCAL(int *)
-function_name (int a, char *b)
-{
- code...
-}
-
-Note that each function definition must begin with GLOBAL(type), LOCAL(type),
-or METHODDEF(type). These macros expand to "static type" or just "type" as
-appropriate. They provide a readable indication of the routine's usage and
-can readily be changed for special needs. (For instance, special linkage
-keywords can be inserted for use in Windows DLLs.)
-
-ansi2knr does not transform method declarations (function pointers in
-structs). We handle these with a macro JMETHOD, defined as
- #ifdef HAVE_PROTOTYPES
- #define JMETHOD(type,methodname,arglist) type (*methodname) arglist
- #else
- #define JMETHOD(type,methodname,arglist) type (*methodname) ()
- #endif
-which is used like this:
- struct function_pointers {
- JMETHOD(void, init_entropy_encoder, (int somearg, jparms *jp));
- JMETHOD(void, term_entropy_encoder, (void));
- };
-Note the set of parentheses surrounding the parameter list.
-
-A similar solution is used for forward and external function declarations
-(see the EXTERN and JPP macros).
-
-If the code is to work on non-ANSI compilers, we cannot rely on a prototype
-declaration to coerce actual parameters into the right types. Therefore, use
-explicit casts on actual parameters whenever the actual parameter type is not
-identical to the formal parameter. Beware of implicit conversions to "int".
-
-It seems there are some non-ANSI compilers in which the sizeof() operator
-is defined to return int, yet size_t is defined as long. Needless to say,
-this is brain-damaged. Always use the SIZEOF() macro in place of sizeof(),
-so that the result is guaranteed to be of type size_t.
-
-
-The JPEG library is intended to be used within larger programs. Furthermore,
-we want it to be reentrant so that it can be used by applications that process
-multiple images concurrently. The following rules support these requirements:
-
-1. Avoid direct use of file I/O, "malloc", error report printouts, etc;
-pass these through the common routines provided.
-
-2. Minimize global namespace pollution. Functions should be declared static
-wherever possible. (Note that our method-based calling conventions help this
-a lot: in many modules only the initialization function will ever need to be
-called directly, so only that function need be externally visible.) All
-global function names should begin with "jpeg_", and should have an
-abbreviated name (unique in the first six characters) substituted by macro
-when NEED_SHORT_EXTERNAL_NAMES is set.
-
-3. Don't use global variables; anything that must be used in another module
-should be in the common data structures.
-
-4. Don't use static variables except for read-only constant tables. Variables
-that should be private to a module can be placed into private structures (see
-the system architecture document, structure.doc).
-
-5. Source file names should begin with "j" for files that are part of the
-library proper; source files that are not part of the library, such as cjpeg.c
-and djpeg.c, do not begin with "j". Keep source file names to eight
-characters (plus ".c" or ".h", etc) to make life easy for MS-DOSers. Keep
-compression and decompression code in separate source files --- some
-applications may want only one half of the library.
-
-Note: these rules (particularly #4) are not followed religiously in the
-modules that are used in cjpeg/djpeg but are not part of the JPEG library
-proper. Those modules are not really intended to be used in other
-applications.
diff --git a/libjpegtwrp/config.guess b/libjpegtwrp/config.guess
deleted file mode 100755
index 413ed41c0..000000000
--- a/libjpegtwrp/config.guess
+++ /dev/null
@@ -1,883 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
-#
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Written by Per Bothner <bothner@cygnus.com>.
-# The master version of this file is at the FSF in /home/gd/gnu/lib.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit system type (host/target name).
-#
-# Only a few systems have been added to this list; please add others
-# (but try to keep the structure clean).
-#
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 8/24/94.)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- alpha:OSF1:*:*)
- if test $UNAME_RELEASE = "V4.0"; then
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- fi
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- cat <<EOF >dummy.s
- .globl main
- .ent main
-main:
- .frame \$30,0,\$26,0
- .prologue 0
- .long 0x47e03d80 # implver $0
- lda \$2,259
- .long 0x47e20c21 # amask $2,$1
- srl \$1,8,\$2
- sll \$2,2,\$2
- sll \$0,3,\$0
- addl \$1,\$0,\$0
- addl \$2,\$0,\$0
- ret \$31,(\$26),1
- .end main
-EOF
- ${CC-cc} dummy.s -o dummy 2>/dev/null
- if test "$?" = 0 ; then
- ./dummy
- case "$?" in
- 7)
- UNAME_MACHINE="alpha"
- ;;
- 15)
- UNAME_MACHINE="alphaev5"
- ;;
- 14)
- UNAME_MACHINE="alphaev56"
- ;;
- 10)
- UNAME_MACHINE="alphapca56"
- ;;
- 16)
- UNAME_MACHINE="alphaev6"
- ;;
- esac
- fi
- rm -f dummy.s dummy
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr [[A-Z]] [[a-z]]`
- exit 0 ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit 0 ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-cbm-sysv4
- exit 0;;
- amiga:NetBSD:*:*)
- echo m68k-cbm-netbsd${UNAME_RELEASE}
- exit 0 ;;
- amiga:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- arc64:OpenBSD:*:*)
- echo mips64el-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- arc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- hkmips:OpenBSD:*:*)
- echo mips-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- pmax:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sgi:OpenBSD:*:*)
- echo mips-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- wgrisc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit 0;;
- arm32:NetBSD:*:*)
- echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- exit 0 ;;
- SR2?01:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit 0;;
- Pyramid*:OSx*:*:*|MIS*:OSx*:*:*)
- # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit 0 ;;
- NILE:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit 0 ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- i86pc:SunOS:5.*:*)
- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit 0 ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit 0 ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit 0 ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit 0 ;;
- atari*:NetBSD:*:*)
- echo m68k-atari-netbsd${UNAME_RELEASE}
- exit 0 ;;
- atari*:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sun3*:NetBSD:*:*)
- echo m68k-sun-netbsd${UNAME_RELEASE}
- exit 0 ;;
- sun3*:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:NetBSD:*:*)
- echo m68k-apple-netbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit 0 ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit 0 ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- 2020:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit 0 ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- sed 's/^ //' << EOF >dummy.c
- int main (argc, argv) int argc; char **argv; {
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- ${CC-cc} dummy.c -o dummy \
- && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
- && rm dummy.c dummy && exit 0
- rm -f dummy.c dummy
- echo mips-mips-riscos${UNAME_RELEASE}
- exit 0 ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit 0 ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit 0 ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit 0 ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit 0 ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
- -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit 0 ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit 0 ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit 0 ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit 0 ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit 0 ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit 0 ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i?86:AIX:*:*)
- echo i386-ibm-aix
- exit 0 ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- sed 's/^ //' << EOF >dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
- rm -f dummy.c dummy
- echo rs6000-ibm-aix3.2.5
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit 0 ;;
- *:AIX:*:4)
- if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=4.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit 0 ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit 0 ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit 0 ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit 0 ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit 0 ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit 0 ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit 0 ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit 0 ;;
- 9000/[3478]??:HP-UX:*:*)
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/7?? | 9000/8?[1679] ) HP_ARCH=hppa1.1 ;;
- 9000/8?? ) HP_ARCH=hppa1.0 ;;
- esac
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit 0 ;;
- 3050*:HI-UX:*:*)
- sed 's/^ //' << EOF >dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
- rm -f dummy.c dummy
- echo unknown-hitachi-hiuxwe2
- exit 0 ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit 0 ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit 0 ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit 0 ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit 0 ;;
- i?86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit 0 ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit 0 ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit 0 ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit 0 ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit 0 ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit 0 ;;
- CRAY*X-MP:*:*:*)
- echo xmp-cray-unicos
- exit 0 ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE}
- exit 0 ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
- exit 0 ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE}
- exit 0 ;;
- CRAY-2:*:*:*)
- echo cray2-cray-unicos
- exit 0 ;;
- F300:UNIX_System_V:*:*)
- FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
- F301:UNIX_System_V:*:*)
- echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
- exit 0 ;;
- hp3[0-9][05]:NetBSD:*:*)
- echo m68k-hp-netbsd${UNAME_RELEASE}
- exit 0 ;;
- hp300:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- i?86:BSD/386:*:* | *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit 0 ;;
- *:FreeBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit 0 ;;
- *:NetBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- exit 0 ;;
- *:OpenBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- exit 0 ;;
- i*:CYGWIN*:*)
- echo i386-pc-cygwin32
- exit 0 ;;
- i*:MINGW*:*)
- echo i386-pc-mingw32
- exit 0 ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin32
- exit 0 ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- *:GNU:*:*)
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit 0 ;;
- *:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us.
- ld_help_string=`ld --help 2>&1`
- ld_supported_emulations=`echo $ld_help_string \
- | sed -ne '/supported emulations:/!d
- s/[ ][ ]*/ /g
- s/.*supported emulations: *//
- s/ .*//
- p'`
- case "$ld_supported_emulations" in
- i?86linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" ; exit 0 ;;
- i?86coff) echo "${UNAME_MACHINE}-pc-linux-gnucoff" ; exit 0 ;;
- sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
- m68klinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
- elf32ppc) echo "powerpc-unknown-linux-gnu" ; exit 0 ;;
- esac
-
- if test "${UNAME_MACHINE}" = "alpha" ; then
- sed 's/^ //' <<EOF >dummy.s
- .globl main
- .ent main
- main:
- .frame \$30,0,\$26,0
- .prologue 0
- .long 0x47e03d80 # implver $0
- lda \$2,259
- .long 0x47e20c21 # amask $2,$1
- srl \$1,8,\$2
- sll \$2,2,\$2
- sll \$0,3,\$0
- addl \$1,\$0,\$0
- addl \$2,\$0,\$0
- ret \$31,(\$26),1
- .end main
-EOF
- LIBC=""
- ${CC-cc} dummy.s -o dummy 2>/dev/null
- if test "$?" = 0 ; then
- ./dummy
- case "$?" in
- 7)
- UNAME_MACHINE="alpha"
- ;;
- 15)
- UNAME_MACHINE="alphaev5"
- ;;
- 14)
- UNAME_MACHINE="alphaev56"
- ;;
- 10)
- UNAME_MACHINE="alphapca56"
- ;;
- 16)
- UNAME_MACHINE="alphaev6"
- ;;
- esac
-
- objdump --private-headers dummy | \
- grep ld.so.1 > /dev/null
- if test "$?" = 0 ; then
- LIBC="libc1"
- fi
- fi
- rm -f dummy.s dummy
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
- elif test "${UNAME_MACHINE}" = "mips" ; then
- cat >dummy.c <<EOF
-main(argc, argv)
- int argc;
- char *argv[];
-{
-#ifdef __MIPSEB__
- printf ("%s-unknown-linux-gnu\n", argv[1]);
-#endif
-#ifdef __MIPSEL__
- printf ("%sel-unknown-linux-gnu\n", argv[1]);
-#endif
- return 0;
-}
-EOF
- ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
- rm -f dummy.c dummy
- else
- # Either a pre-BFD a.out linker (linux-gnuoldld)
- # or one that does not give us useful --help.
- # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
- # If ld does not provide *any* "supported emulations:"
- # that means it is gnuoldld.
- echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
- test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
-
- case "${UNAME_MACHINE}" in
- i?86)
- VENDOR=pc;
- ;;
- *)
- VENDOR=unknown;
- ;;
- esac
- # Determine whether the default compiler is a.out or elf
- cat >dummy.c <<EOF
-#include <features.h>
-main(argc, argv)
- int argc;
- char *argv[];
-{
-#ifdef __ELF__
-# ifdef __GLIBC__
-# if __GLIBC__ >= 2
- printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
-# else
- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
-# endif
-# else
- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
-# endif
-#else
- printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
-#endif
- return 0;
-}
-EOF
- ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
- rm -f dummy.c dummy
- fi ;;
-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
-# are messed up and put the nodename in both sysname and nodename.
- i?86:DYNIX/ptx:4*:*)
- echo i386-sequent-sysv4
- exit 0 ;;
- i?86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit 0 ;;
- i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
- fi
- exit 0 ;;
- i?86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit 0 ;;
- pc:*:*:*)
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i386.
- echo i386-pc-msdosdjgpp
- exit 0 ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit 0 ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit 0 ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit 0 ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit 0 ;;
- M68*:*:R3V[567]*:*)
- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4.3${OS_REL} && exit 0
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4 && exit 0 ;;
- m68*:LynxOS:2.*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit 0 ;;
- i?86:LynxOS:2.*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit 0 ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit 0 ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit 0 ;;
- PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit 0 ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes <hewes@openmarket.com>.
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit 0 ;;
- *:*:*:FTX*)
- # From seanf@swdc.stratus.com.
- echo i860-stratus-sysv4
- exit 0 ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit 0 ;;
- news*:NEWS-OS:*:6*)
- echo mips-sony-newsos6
- exit 0 ;;
- R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit 0 ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-cat >dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-#if !defined (ultrix)
- printf ("vax-dec-bsd\n"); exit (0);
-#else
- printf ("vax-dec-ultrix\n"); exit (0);
-#endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
-rm -f dummy.c dummy
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit 0 ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- c34*)
- echo c34-convex-bsd
- exit 0 ;;
- c38*)
- echo c38-convex-bsd
- exit 0 ;;
- c4*)
- echo c4-convex-bsd
- exit 0 ;;
- esac
-fi
-
-#echo '(Unable to guess system type)' 1>&2
-
-exit 1
diff --git a/libjpegtwrp/config.sub b/libjpegtwrp/config.sub
deleted file mode 100755
index 213a6d47d..000000000
--- a/libjpegtwrp/config.sub
+++ /dev/null
@@ -1,954 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script, version 1.1.
-# Copyright (C) 1991, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support. The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-if [ x$1 = x ]
-then
- echo Configuration name missing. 1>&2
- echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
- echo "or $0 ALIAS" 1>&2
- echo where ALIAS is a recognized configuration type. 1>&2
- exit 1
-fi
-
-# First pass through any local machine types.
-case $1 in
- *local*)
- echo $1
- exit 0
- ;;
- *)
- ;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
- linux-gnu*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
- *)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
- else os=; fi
- ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work. We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
- -sun*os*)
- # Prevent following clause from handling this invalid input.
- ;;
- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple)
- os=
- basic_machine=$1
- ;;
- -hiux*)
- os=-hiuxwe2
- ;;
- -sco5)
- os=sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco4)
- os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2.[4-9]*)
- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2v[4-9]*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco*)
- os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -isc)
- os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -clix*)
- basic_machine=clipper-intergraph
- ;;
- -isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -lynx*)
- os=-lynxos
- ;;
- -ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
- ;;
- -psos*)
- os=-psos
- ;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
- # Recognize the basic CPU types without company name.
- # Some are omitted here because they have special meanings below.
- tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
- | arme[lb] | pyramid | mn10200 | mn10300 \
- | tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \
- | alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \
- | i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \
- | mips64 | mipsel | mips64el | mips64orion | mips64orionel \
- | mipstx39 | mipstx39el \
- | sparc | sparclet | sparclite | sparc64 | v850)
- basic_machine=$basic_machine-unknown
- ;;
- # We use `pc' rather than `unknown'
- # because (1) that's what they normally are, and
- # (2) the word "unknown" tends to confuse beginning users.
- i[3456]86)
- basic_machine=$basic_machine-pc
- ;;
- # Object if more than one company name word.
- *-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
- # Recognize the basic CPU types with company name.
- vax-* | tahoe-* | i[3456]86-* | i860-* | m32r-* | m68k-* | m68000-* \
- | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
- | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
- | power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \
- | xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* \
- | alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \
- | ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \
- | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
- | sparc64-* | mips64-* | mipsel-* \
- | mips64el-* | mips64orion-* | mips64orionel-* \
- | mipstx39-* | mipstx39el-* \
- | f301-*)
- ;;
- # Recognize the various machine names and aliases which stand
- # for a CPU type and a company and sometimes even an OS.
- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
- basic_machine=m68000-att
- ;;
- 3b*)
- basic_machine=we32k-att
- ;;
- alliant | fx80)
- basic_machine=fx80-alliant
- ;;
- altos | altos3068)
- basic_machine=m68k-altos
- ;;
- am29k)
- basic_machine=a29k-none
- os=-bsd
- ;;
- amdahl)
- basic_machine=580-amdahl
- os=-sysv
- ;;
- amiga | amiga-*)
- basic_machine=m68k-cbm
- ;;
- amigaos | amigados)
- basic_machine=m68k-cbm
- os=-amigaos
- ;;
- amigaunix | amix)
- basic_machine=m68k-cbm
- os=-sysv4
- ;;
- apollo68)
- basic_machine=m68k-apollo
- os=-sysv
- ;;
- aux)
- basic_machine=m68k-apple
- os=-aux
- ;;
- balance)
- basic_machine=ns32k-sequent
- os=-dynix
- ;;
- convex-c1)
- basic_machine=c1-convex
- os=-bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- os=-bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- os=-bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- os=-bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- os=-bsd
- ;;
- cray | ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- cray2)
- basic_machine=cray2-cray
- os=-unicos
- ;;
- [ctj]90-cray)
- basic_machine=c90-cray
- os=-unicos
- ;;
- crds | unos)
- basic_machine=m68k-crds
- ;;
- da30 | da30-*)
- basic_machine=m68k-da30
- ;;
- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
- basic_machine=mips-dec
- ;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
- basic_machine=m68k-motorola
- ;;
- delta88)
- basic_machine=m88k-motorola
- os=-sysv3
- ;;
- dpx20 | dpx20-*)
- basic_machine=rs6000-bull
- os=-bosx
- ;;
- dpx2* | dpx2*-bull)
- basic_machine=m68k-bull
- os=-sysv3
- ;;
- ebmon29k)
- basic_machine=a29k-amd
- os=-ebmon
- ;;
- elxsi)
- basic_machine=elxsi-elxsi
- os=-bsd
- ;;
- encore | umax | mmax)
- basic_machine=ns32k-encore
- ;;
- fx2800)
- basic_machine=i860-alliant
- ;;
- genix)
- basic_machine=ns32k-ns
- ;;
- gmicro)
- basic_machine=tron-gmicro
- os=-sysv
- ;;
- h3050r* | hiux*)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- h8300hms)
- basic_machine=h8300-hitachi
- os=-hms
- ;;
- harris)
- basic_machine=m88k-harris
- os=-sysv3
- ;;
- hp300-*)
- basic_machine=m68k-hp
- ;;
- hp300bsd)
- basic_machine=m68k-hp
- os=-bsd
- ;;
- hp300hpux)
- basic_machine=m68k-hp
- os=-hpux
- ;;
- hp9k2[0-9][0-9] | hp9k31[0-9])
- basic_machine=m68000-hp
- ;;
- hp9k3[2-9][0-9])
- basic_machine=m68k-hp
- ;;
- hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7)
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][0-9] | hp8[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hppa-next)
- os=-nextstep3
- ;;
- i370-ibm* | ibm*)
- basic_machine=i370-ibm
- os=-mvs
- ;;
-# I'm not sure what "Sysv32" means. Should this be sysv3.2?
- i[3456]86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv32
- ;;
- i[3456]86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv4
- ;;
- i[3456]86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv
- ;;
- i[3456]86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-solaris2
- ;;
- iris | iris4d)
- basic_machine=mips-sgi
- case $os in
- -irix*)
- ;;
- *)
- os=-irix4
- ;;
- esac
- ;;
- isi68 | isi)
- basic_machine=m68k-isi
- os=-sysv
- ;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
- magnum | m3230)
- basic_machine=mips-mips
- os=-sysv
- ;;
- merlin)
- basic_machine=ns32k-utek
- os=-sysv
- ;;
- miniframe)
- basic_machine=m68000-convergent
- ;;
- mipsel*-linux*)
- basic_machine=mipsel-unknown
- os=-linux-gnu
- ;;
- mips*-linux*)
- basic_machine=mips-unknown
- os=-linux-gnu
- ;;
- mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- ;;
- mips3*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
- ;;
- ncr3000)
- basic_machine=i486-ncr
- os=-sysv4
- ;;
- news | news700 | news800 | news900)
- basic_machine=m68k-sony
- os=-newsos
- ;;
- news1000)
- basic_machine=m68030-sony
- os=-newsos
- ;;
- news-3600 | risc-news)
- basic_machine=mips-sony
- os=-newsos
- ;;
- next | m*-next )
- basic_machine=m68k-next
- case $os in
- -nextstep* )
- ;;
- -ns2*)
- os=-nextstep2
- ;;
- *)
- os=-nextstep3
- ;;
- esac
- ;;
- nh3000)
- basic_machine=m68k-harris
- os=-cxux
- ;;
- nh[45]000)
- basic_machine=m88k-harris
- os=-cxux
- ;;
- nindy960)
- basic_machine=i960-intel
- os=-nindy
- ;;
- np1)
- basic_machine=np1-gould
- ;;
- pa-hitachi)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- paragon)
- basic_machine=i860-intel
- os=-osf
- ;;
- pbd)
- basic_machine=sparc-tti
- ;;
- pbb)
- basic_machine=m68k-tti
- ;;
- pc532 | pc532-*)
- basic_machine=ns32k-pc532
- ;;
- pentium | p5)
- basic_machine=i586-intel
- ;;
- pentiumpro | p6)
- basic_machine=i686-intel
- ;;
- pentium-* | p5-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumpro-* | p6-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- k5)
- # We don't have specific support for AMD's K5 yet, so just call it a Pentium
- basic_machine=i586-amd
- ;;
- nexen)
- # We don't have specific support for Nexgen yet, so just call it a Pentium
- basic_machine=i586-nexgen
- ;;
- pn)
- basic_machine=pn-gould
- ;;
- power) basic_machine=rs6000-ibm
- ;;
- ppc) basic_machine=powerpc-unknown
- ;;
- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
- basic_machine=powerpcle-unknown
- ;;
- ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ps2)
- basic_machine=i386-ibm
- ;;
- rm[46]00)
- basic_machine=mips-siemens
- ;;
- rtpc | rtpc-*)
- basic_machine=romp-ibm
- ;;
- sequent)
- basic_machine=i386-sequent
- ;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
- sps7)
- basic_machine=m68k-bull
- os=-sysv2
- ;;
- spur)
- basic_machine=spur-unknown
- ;;
- sun2)
- basic_machine=m68000-sun
- ;;
- sun2os3)
- basic_machine=m68000-sun
- os=-sunos3
- ;;
- sun2os4)
- basic_machine=m68000-sun
- os=-sunos4
- ;;
- sun3os3)
- basic_machine=m68k-sun
- os=-sunos3
- ;;
- sun3os4)
- basic_machine=m68k-sun
- os=-sunos4
- ;;
- sun4os3)
- basic_machine=sparc-sun
- os=-sunos3
- ;;
- sun4os4)
- basic_machine=sparc-sun
- os=-sunos4
- ;;
- sun4sol2)
- basic_machine=sparc-sun
- os=-solaris2
- ;;
- sun3 | sun3-*)
- basic_machine=m68k-sun
- ;;
- sun4)
- basic_machine=sparc-sun
- ;;
- sun386 | sun386i | roadrunner)
- basic_machine=i386-sun
- ;;
- symmetry)
- basic_machine=i386-sequent
- os=-dynix
- ;;
- tx39)
- basic_machine=mipstx39-unknown
- ;;
- tx39el)
- basic_machine=mipstx39el-unknown
- ;;
- tower | tower-32)
- basic_machine=m68k-ncr
- ;;
- udi29k)
- basic_machine=a29k-amd
- os=-udi
- ;;
- ultra3)
- basic_machine=a29k-nyu
- os=-sym1
- ;;
- vaxv)
- basic_machine=vax-dec
- os=-sysv
- ;;
- vms)
- basic_machine=vax-dec
- os=-vms
- ;;
- vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
- vxworks960)
- basic_machine=i960-wrs
- os=-vxworks
- ;;
- vxworks68)
- basic_machine=m68k-wrs
- os=-vxworks
- ;;
- vxworks29k)
- basic_machine=a29k-wrs
- os=-vxworks
- ;;
- xmp)
- basic_machine=xmp-cray
- os=-unicos
- ;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
- none)
- basic_machine=none-none
- os=-none
- ;;
-
-# Here we handle the default manufacturer of certain CPU types. It is in
-# some cases the only manufacturer, in others, it is the most popular.
- mips)
- if [ x$os = x-linux-gnu ]; then
- basic_machine=mips-unknown
- else
- basic_machine=mips-mips
- fi
- ;;
- romp)
- basic_machine=romp-ibm
- ;;
- rs6000)
- basic_machine=rs6000-ibm
- ;;
- vax)
- basic_machine=vax-dec
- ;;
- pdp11)
- basic_machine=pdp11-dec
- ;;
- we32k)
- basic_machine=we32k-att
- ;;
- sparc)
- basic_machine=sparc-sun
- ;;
- cydra)
- basic_machine=cydra-cydrome
- ;;
- orion)
- basic_machine=orion-highlevel
- ;;
- orion105)
- basic_machine=clipper-highlevel
- ;;
- *)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
- *-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
- ;;
- *-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
- ;;
- *)
- ;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
- # -solaris* is a basic system type, with this one exception.
- -solaris1 | -solaris1.*)
- os=`echo $os | sed -e 's|solaris1|sunos4|'`
- ;;
- -solaris)
- os=-solaris2
- ;;
- -svr4*)
- os=-sysv4
- ;;
- -unixware*)
- os=-sysv4.2uw
- ;;
- -gnu/linux*)
- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
- ;;
- # First accept the basic system types.
- # The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
- # -sysv* is not here because it comes later, after sysvr4.
- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* \
- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -cygwin32* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -uxpv*)
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
- -linux*)
- os=`echo $os | sed -e 's|linux|linux-gnu|'`
- ;;
- -sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
- ;;
- -sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
- ;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
- -utek*)
- os=-bsd
- ;;
- -dynix*)
- os=-bsd
- ;;
- -acis*)
- os=-aos
- ;;
- -ctix* | -uts*)
- os=-sysv
- ;;
- -ns2 )
- os=-nextstep2
- ;;
- # Preserve the version number of sinix5.
- -sinix5.*)
- os=`echo $os | sed -e 's|sinix|sysv|'`
- ;;
- -sinix*)
- os=-sysv4
- ;;
- -triton*)
- os=-sysv3
- ;;
- -oss*)
- os=-sysv3
- ;;
- -svr4)
- os=-sysv4
- ;;
- -svr3)
- os=-sysv3
- ;;
- -sysvr4)
- os=-sysv4
- ;;
- # This must come after -sysvr4.
- -sysv*)
- ;;
- -xenix)
- os=-xenix
- ;;
- -none)
- ;;
- *)
- # Get rid of the `-' at the beginning of $os.
- os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
- exit 1
- ;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system. Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
- *-acorn)
- os=-riscix1.2
- ;;
- arm*-semi)
- os=-aout
- ;;
- pdp11-*)
- os=-none
- ;;
- *-dec | vax-*)
- os=-ultrix4.2
- ;;
- m68*-apollo)
- os=-domain
- ;;
- i386-sun)
- os=-sunos4.0.2
- ;;
- m68000-sun)
- os=-sunos3
- # This also exists in the configure program, but was not the
- # default.
- # os=-sunos4
- ;;
- *-tti) # must be before sparc entry or we get the wrong os.
- os=-sysv3
- ;;
- sparc-* | *-sun)
- os=-sunos4.1.1
- ;;
- *-ibm)
- os=-aix
- ;;
- *-hp)
- os=-hpux
- ;;
- *-hitachi)
- os=-hiux
- ;;
- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
- os=-sysv
- ;;
- *-cbm)
- os=-amigaos
- ;;
- *-dg)
- os=-dgux
- ;;
- *-dolphin)
- os=-sysv3
- ;;
- m68k-ccur)
- os=-rtu
- ;;
- m88k-omron*)
- os=-luna
- ;;
- *-next )
- os=-nextstep
- ;;
- *-sequent)
- os=-ptx
- ;;
- *-crds)
- os=-unos
- ;;
- *-ns)
- os=-genix
- ;;
- i370-*)
- os=-mvs
- ;;
- *-next)
- os=-nextstep3
- ;;
- *-gould)
- os=-sysv
- ;;
- *-highlevel)
- os=-bsd
- ;;
- *-encore)
- os=-bsd
- ;;
- *-sgi)
- os=-irix
- ;;
- *-siemens)
- os=-sysv4
- ;;
- *-masscomp)
- os=-rtu
- ;;
- f301-fujitsu)
- os=-uxpv
- ;;
- *)
- os=-none
- ;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer. We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
- *-unknown)
- case $os in
- -riscix*)
- vendor=acorn
- ;;
- -sunos*)
- vendor=sun
- ;;
- -aix*)
- vendor=ibm
- ;;
- -hpux*)
- vendor=hp
- ;;
- -hiux*)
- vendor=hitachi
- ;;
- -unos*)
- vendor=crds
- ;;
- -dgux*)
- vendor=dg
- ;;
- -luna*)
- vendor=omron
- ;;
- -genix*)
- vendor=ns
- ;;
- -mvs*)
- vendor=ibm
- ;;
- -ptx*)
- vendor=sequent
- ;;
- -vxsim* | -vxworks*)
- vendor=wrs
- ;;
- -aux*)
- vendor=apple
- ;;
- esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
- ;;
-esac
-
-echo $basic_machine$os
diff --git a/libjpegtwrp/configure b/libjpegtwrp/configure
deleted file mode 100755
index 35c9db5ca..000000000
--- a/libjpegtwrp/configure
+++ /dev/null
@@ -1,2011 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
- --enable-shared build shared library using GNU libtool"
-ac_help="$ac_help
- --enable-static build static library using GNU libtool"
-ac_help="$ac_help
- --enable-maxmem[=N] enable use of temp files, set max mem usage to N MB"
-ac_help="$ac_help
-"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
- ac_prev=
- continue
- fi
-
- case "$ac_option" in
- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
- *) ac_optarg= ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case "$ac_option" in
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir="$ac_optarg" ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build="$ac_optarg" ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file="$ac_optarg" ;;
-
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
- datadir="$ac_optarg" ;;
-
- -disable-* | --disable-*)
- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
- fi
- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
- eval "enable_${ac_feature}=no" ;;
-
- -enable-* | --enable-*)
- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
- fi
- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
- case "$ac_option" in
- *=*) ;;
- *) ac_optarg=yes ;;
- esac
- eval "enable_${ac_feature}='$ac_optarg'" ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix="$ac_optarg" ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he)
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
- --cache-file=FILE cache test results in FILE
- --help print this message
- --no-create do not create output files
- --quiet, --silent do not print \`checking...' messages
- --version print the version of autoconf that created configure
-Directory and file names:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [same as prefix]
- --bindir=DIR user executables in DIR [EPREFIX/bin]
- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
- --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data in DIR
- [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data in DIR
- [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
- --libdir=DIR object code libraries in DIR [EPREFIX/lib]
- --includedir=DIR C header files in DIR [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
- --infodir=DIR info documentation in DIR [PREFIX/info]
- --mandir=DIR man documentation in DIR [PREFIX/man]
- --srcdir=DIR find the sources in DIR [configure dir or ..]
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM
- run sed PROGRAM on installed program names
-EOF
- cat << EOF
-Host type:
- --build=BUILD configure for building on BUILD [BUILD=HOST]
- --host=HOST configure for HOST [guessed]
- --target=TARGET configure for TARGET [TARGET=HOST]
-Features and packages:
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --x-includes=DIR X include files are in DIR
- --x-libraries=DIR X library files are in DIR
-EOF
- if test -n "$ac_help"; then
- echo "--enable and --with options recognized:$ac_help"
- fi
- exit 0 ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host="$ac_optarg" ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir="$ac_optarg" ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir="$ac_optarg" ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir="$ac_optarg" ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir="$ac_optarg" ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
- | --locals | --local | --loca | --loc | --lo)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
- localstatedir="$ac_optarg" ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir="$ac_optarg" ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir="$ac_optarg" ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix="$ac_optarg" ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix="$ac_optarg" ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix="$ac_optarg" ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name="$ac_optarg" ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir="$ac_optarg" ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir="$ac_optarg" ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site="$ac_optarg" ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir="$ac_optarg" ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir="$ac_optarg" ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target="$ac_optarg" ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12"
- exit 0 ;;
-
- -with-* | --with-*)
- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
- fi
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- case "$ac_option" in
- *=*) ;;
- *) ac_optarg=yes ;;
- esac
- eval "with_${ac_package}='$ac_optarg'" ;;
-
- -without-* | --without-*)
- ac_package=`echo $ac_option|sed -e 's/-*without-//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
- fi
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- eval "with_${ac_package}=no" ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes="$ac_optarg" ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries="$ac_optarg" ;;
-
- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
- ;;
-
- *=*)
- varname=`echo "$ac_option"|sed -e 's/=.*//'`
- # Reject names that aren't valid shell variable names.
- if test -n "`echo $varname| sed 's/[a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $varname: invalid shell variable name" 1>&2; exit 1; }
- fi
- val="`echo "$ac_option"|sed 's/[^=]*=//'`"
- test -n "$verbose" && echo " setting shell variable $varname to $val"
- eval "$varname='$val'"
- eval "export $varname" ;;
-
- *)
- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
- echo "configure: warning: $ac_option: invalid host type" 1>&2
- fi
- if test "x$nonopt" != xNONE; then
- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
- fi
- nonopt="$ac_option"
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
- exec 6>/dev/null
-else
- exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
- case "$ac_arg" in
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c) ;;
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
- ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- *) ac_configure_args="$ac_configure_args $ac_arg" ;;
- esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set. These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=jcmaster.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
- ac_prog=$0
- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
- srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
- else
- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
- fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
-fi
-for ac_site_file in $CONFIG_SITE; do
- if test -r "$ac_site_file"; then
- echo "loading site script $ac_site_file"
- . "$ac_site_file"
- fi
-done
-
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
- ac_n= ac_c='
-' ac_t=' '
- else
- ac_n=-n ac_c= ac_t=
- fi
-else
- ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:538: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="gcc"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:567: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- ac_prog_rejected=no
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- break
- fi
- done
- IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# -gt 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- set dummy "$ac_dir/$ac_word" "$@"
- shift
- ac_cv_prog_CC="$@"
- fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:615: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 625 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:629: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:649: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:654: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.c <<EOF
-#ifdef __GNUC__
- yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:663: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
- ac_cv_prog_gcc=yes
-else
- ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
- GCC=yes
- test "${CFLAGS+set}" = set || CFLAGS="-O2"
-else
- GCC=
- test "${CFLAGS+set}" = set || CFLAGS="-O"
-fi
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:681: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
- cat > conftest.$ac_ext <<EOF
-#line 696 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:702: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -E -traditional-cpp"
- cat > conftest.$ac_ext <<EOF
-#line 713 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:719: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
- ac_cv_prog_CPP="$CPP"
-fi
- CPP="$ac_cv_prog_CPP"
-else
- ac_cv_prog_CPP="$CPP"
-fi
-echo "$ac_t""$CPP" 1>&6
-
-echo $ac_n "checking for function prototypes""... $ac_c" 1>&6
-echo "configure:742: checking for function prototypes" >&5
-if eval "test \"`echo '$''{'ijg_cv_have_prototypes'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 747 "configure"
-#include "confdefs.h"
-
-int testfunction (int arg1, int * arg2); /* check prototypes */
-struct methods_struct { /* check method-pointer declarations */
- int (*error_exit) (char *msgtext);
- int (*trace_message) (char *msgtext);
- int (*another_method) (void);
-};
-int testfunction (int arg1, int * arg2) /* check definitions */
-{ return arg2[arg1]; }
-int test2function (void) /* check void arg list */
-{ return 0; }
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:765: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ijg_cv_have_prototypes=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ijg_cv_have_prototypes=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ijg_cv_have_prototypes" 1>&6
-if test $ijg_cv_have_prototypes = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_PROTOTYPES
-EOF
-
-else
- echo Your compiler does not seem to know about function prototypes.
- echo Perhaps it needs a special switch to enable ANSI C mode.
- echo If so, we recommend running configure like this:
- echo " ./configure CC='cc -switch'"
- echo where -switch is the proper switch.
-fi
-ac_safe=`echo "stddef.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for stddef.h""... $ac_c" 1>&6
-echo "configure:792: checking for stddef.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 797 "configure"
-#include "confdefs.h"
-#include <stddef.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:802: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_STDDEF_H
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-
-ac_safe=`echo "stdlib.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for stdlib.h""... $ac_c" 1>&6
-echo "configure:828: checking for stdlib.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 833 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:838: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_STDLIB_H
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-
-ac_safe=`echo "string.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for string.h""... $ac_c" 1>&6
-echo "configure:864: checking for string.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 869 "configure"
-#include "confdefs.h"
-#include <string.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define NEED_BSD_STRINGS
-EOF
-
-fi
-
-echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:900: checking for size_t" >&5
-cat > conftest.$ac_ext <<EOF
-#line 902 "configure"
-#include "confdefs.h"
-
-#ifdef HAVE_STDDEF_H
-#include <stddef.h>
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#include <stdio.h>
-#ifdef NEED_BSD_STRINGS
-#include <strings.h>
-#else
-#include <string.h>
-#endif
-typedef size_t my_size_t;
-
-int main() {
- my_size_t foovar;
-; return 0; }
-EOF
-if { (eval echo configure:923: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ijg_size_t_ok=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h"
-fi
-rm -f conftest*
-echo "$ac_t""$ijg_size_t_ok" 1>&6
-if test "$ijg_size_t_ok" != yes; then
-ac_safe=`echo "sys/types.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for sys/types.h""... $ac_c" 1>&6
-echo "configure:937: checking for sys/types.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 942 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:947: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define NEED_SYS_TYPES_H
-EOF
-
-cat > conftest.$ac_ext <<EOF
-#line 968 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "size_t" >/dev/null 2>&1; then
- rm -rf conftest*
- ijg_size_t_ok="size_t is in sys/types.h"
-else
- rm -rf conftest*
- ijg_size_t_ok=no
-fi
-rm -f conftest*
-
-else
- echo "$ac_t""no" 1>&6
-ijg_size_t_ok=no
-fi
-
-echo "$ac_t""$ijg_size_t_ok" 1>&6
-if test "$ijg_size_t_ok" = no; then
- echo Type size_t is not defined in any of the usual places.
- echo Try putting '"typedef unsigned int size_t;"' in jconfig.h.
-fi
-fi
-echo $ac_n "checking for type unsigned char""... $ac_c" 1>&6
-echo "configure:994: checking for type unsigned char" >&5
-cat > conftest.$ac_ext <<EOF
-#line 996 "configure"
-#include "confdefs.h"
-
-int main() {
- unsigned char un_char;
-; return 0; }
-EOF
-if { (eval echo configure:1003: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- echo "$ac_t""yes" 1>&6
-cat >> confdefs.h <<\EOF
-#define HAVE_UNSIGNED_CHAR
-EOF
-
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""no" 1>&6
-fi
-rm -f conftest*
-echo $ac_n "checking for type unsigned short""... $ac_c" 1>&6
-echo "configure:1018: checking for type unsigned short" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1020 "configure"
-#include "confdefs.h"
-
-int main() {
- unsigned short un_short;
-; return 0; }
-EOF
-if { (eval echo configure:1027: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- echo "$ac_t""yes" 1>&6
-cat >> confdefs.h <<\EOF
-#define HAVE_UNSIGNED_SHORT
-EOF
-
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""no" 1>&6
-fi
-rm -f conftest*
-echo $ac_n "checking for type void""... $ac_c" 1>&6
-echo "configure:1042: checking for type void" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1044 "configure"
-#include "confdefs.h"
-
-/* Caution: a C++ compiler will insist on valid prototypes */
-typedef void * void_ptr; /* check void * */
-#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */
-typedef void (*void_func) (int a, int b);
-#else
-typedef void (*void_func) ();
-#endif
-
-#ifdef HAVE_PROTOTYPES /* check void function result */
-void test3function (void_ptr arg1, void_func arg2)
-#else
-void test3function (arg1, arg2)
- void_ptr arg1;
- void_func arg2;
-#endif
-{
- char * locptr = (char *) arg1; /* check casting to and from void * */
- arg1 = (void *) locptr;
- (*arg2) (1, 2); /* check call of fcn returning void */
-}
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:1072: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- echo "$ac_t""yes" 1>&6
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define void char
-EOF
-
-fi
-rm -f conftest*
-
-echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1088: checking for working const" >&5
-if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1093 "configure"
-#include "confdefs.h"
-
-int main() {
-
-/* Ultrix mips cc rejects this. */
-typedef int charset[2]; const charset x;
-/* SunOS 4.1.1 cc rejects this. */
-char const *const *ccp;
-char **p;
-/* NEC SVR4.0.2 mips cc rejects this. */
-struct point {int x, y;};
-static struct point const zero = {0,0};
-/* AIX XL C 1.02.0.0 rejects this.
- It does not let you subtract one const X* pointer from another in an arm
- of an if-expression whose if-part is not a constant expression */
-const char *g = "string";
-ccp = &g + (g ? g-g : 0);
-/* HPUX 7.0 cc rejects these. */
-++ccp;
-p = (char**) ccp;
-ccp = (char const *const *) p;
-{ /* SCO 3.2v4 cc rejects this. */
- char *t;
- char const *s = 0 ? (char *) 0 : (char const *) 0;
-
- *t++ = 0;
-}
-{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
- int x[] = {25, 17};
- const int *foo = &x[0];
- ++foo;
-}
-{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
- typedef const int *iptr;
- iptr p = 0;
- ++p;
-}
-{ /* AIX XL C 1.02.0.0 rejects this saying
- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
- struct s { int j; const int *ap[3]; };
- struct s *b; b->j = 5;
-}
-{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
- const int foo = 10;
-}
-
-; return 0; }
-EOF
-if { (eval echo configure:1142: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_c_const=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_c_const=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_c_const" 1>&6
-if test $ac_cv_c_const = no; then
- cat >> confdefs.h <<\EOF
-#define const
-EOF
-
-fi
-
-echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1163: checking for inline" >&5
-ijg_cv_inline=""
-cat > conftest.$ac_ext <<EOF
-#line 1166 "configure"
-#include "confdefs.h"
-
-int main() {
-} __inline__ int foo() { return 0; }
-int bar() { return foo();
-; return 0; }
-EOF
-if { (eval echo configure:1174: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ijg_cv_inline="__inline__"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- cat > conftest.$ac_ext <<EOF
-#line 1182 "configure"
-#include "confdefs.h"
-
-int main() {
-} __inline int foo() { return 0; }
-int bar() { return foo();
-; return 0; }
-EOF
-if { (eval echo configure:1190: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ijg_cv_inline="__inline"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- cat > conftest.$ac_ext <<EOF
-#line 1198 "configure"
-#include "confdefs.h"
-
-int main() {
-} inline int foo() { return 0; }
-int bar() { return foo();
-; return 0; }
-EOF
-if { (eval echo configure:1206: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ijg_cv_inline="inline"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-echo "$ac_t""$ijg_cv_inline" 1>&6
-cat >> confdefs.h <<EOF
-#define INLINE $ijg_cv_inline
-EOF
-
-echo $ac_n "checking for broken incomplete types""... $ac_c" 1>&6
-echo "configure:1224: checking for broken incomplete types" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1226 "configure"
-#include "confdefs.h"
- typedef struct undefined_structure * undef_struct_ptr;
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:1233: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- echo "$ac_t""ok" 1>&6
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""broken" 1>&6
-cat >> confdefs.h <<\EOF
-#define INCOMPLETE_TYPES_BROKEN
-EOF
-
-fi
-rm -f conftest*
-echo $ac_n "checking for short external names""... $ac_c" 1>&6
-echo "configure:1248: checking for short external names" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1250 "configure"
-#include "confdefs.h"
-
-int possibly_duplicate_function () { return 0; }
-int possibly_dupli_function () { return 1; }
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:1260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- rm -rf conftest*
- echo "$ac_t""ok" 1>&6
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""short" 1>&6
-cat >> confdefs.h <<\EOF
-#define NEED_SHORT_EXTERNAL_NAMES
-EOF
-
-fi
-rm -f conftest*
-echo $ac_n "checking to see if char is signed""... $ac_c" 1>&6
-echo "configure:1275: checking to see if char is signed" >&5
-if test "$cross_compiling" = yes; then
- echo Assuming that char is signed on target machine.
-echo If it is unsigned, this will be a little bit inefficient.
-
-else
- cat > conftest.$ac_ext <<EOF
-#line 1282 "configure"
-#include "confdefs.h"
-
-#ifdef HAVE_PROTOTYPES
-int is_char_signed (int arg)
-#else
-int is_char_signed (arg)
- int arg;
-#endif
-{
- if (arg == 189) { /* expected result for unsigned char */
- return 0; /* type char is unsigned */
- }
- else if (arg != -67) { /* expected result for signed char */
- printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n");
- printf("I fear the JPEG software will not work at all.\n\n");
- }
- return 1; /* assume char is signed otherwise */
-}
-char signed_char_check = (char) (-67);
-main() {
- exit(is_char_signed((int) signed_char_check));
-}
-EOF
-if { (eval echo configure:1306: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
- echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define CHAR_IS_UNSIGNED
-EOF
-
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- echo "$ac_t""yes" 1>&6
-fi
-rm -fr conftest*
-fi
-
-echo $ac_n "checking to see if right shift is signed""... $ac_c" 1>&6
-echo "configure:1323: checking to see if right shift is signed" >&5
-if test "$cross_compiling" = yes; then
- echo "$ac_t""Assuming that right shift is signed on target machine." 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1328 "configure"
-#include "confdefs.h"
-
-#ifdef HAVE_PROTOTYPES
-int is_shifting_signed (long arg)
-#else
-int is_shifting_signed (arg)
- long arg;
-#endif
-/* See whether right-shift on a long is signed or not. */
-{
- long res = arg >> 4;
-
- if (res == -0x7F7E80CL) { /* expected result for signed shift */
- return 1; /* right shift is signed */
- }
- /* see if unsigned-shift hack will fix it. */
- /* we can't just test exact value since it depends on width of long... */
- res |= (~0L) << (32-4);
- if (res == -0x7F7E80CL) { /* expected result now? */
- return 0; /* right shift is unsigned */
- }
- printf("Right shift isn't acting as I expect it to.\n");
- printf("I fear the JPEG software will not work at all.\n\n");
- return 0; /* try it with unsigned anyway */
-}
-main() {
- exit(is_shifting_signed(-0x7F7E80B1L));
-}
-EOF
-if { (eval echo configure:1358: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
- echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define RIGHT_SHIFT_IS_UNSIGNED
-EOF
-
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- echo "$ac_t""yes" 1>&6
-fi
-rm -fr conftest*
-fi
-
-echo $ac_n "checking to see if fopen accepts b spec""... $ac_c" 1>&6
-echo "configure:1375: checking to see if fopen accepts b spec" >&5
-if test "$cross_compiling" = yes; then
- echo "$ac_t""Assuming that it does." 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1380 "configure"
-#include "confdefs.h"
-
-#include <stdio.h>
-main() {
- if (fopen("conftestdata", "wb") != NULL)
- exit(0);
- exit(1);
-}
-EOF
-if { (eval echo configure:1390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
- echo "$ac_t""yes" 1>&6
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define DONT_USE_B_MODE
-EOF
-
-fi
-rm -fr conftest*
-fi
-
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1436: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- # Account for people who put trailing slashes in PATH elements.
- case "$ac_dir/" in
- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- for ac_prog in ginstall installbsd scoinst install; do
- if test -f $ac_dir/$ac_prog; then
- if test $ac_prog = install &&
- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- # OSF/1 installbsd also uses dspmsg, but is usable.
- :
- else
- ac_cv_path_install="$ac_dir/$ac_prog -c"
- break 2
- fi
- fi
- done
- ;;
- esac
- done
- IFS="$ac_save_IFS"
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL="$ac_cv_path_install"
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL="$ac_install_sh"
- fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1488: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-# Decide whether to use libtool,
-# and if so whether to build shared, static, or both flavors of library.
-LTSHARED="no"
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
- LTSHARED="$enableval"
-fi
-
-LTSTATIC="no"
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
- enableval="$enable_static"
- LTSTATIC="$enableval"
-fi
-
-if test "x$LTSHARED" != xno -o "x$LTSTATIC" != xno; then
- USELIBTOOL="yes"
- LIBTOOL="./libtool"
- O="lo"
- A="la"
- LN='$(LIBTOOL) --mode=link $(CC)'
- INSTALL_LIB='$(LIBTOOL) --mode=install ${INSTALL}'
- INSTALL_PROGRAM="\$(LIBTOOL) --mode=install $INSTALL_PROGRAM"
-else
- USELIBTOOL="no"
- LIBTOOL=""
- O="o"
- A="a"
- LN='$(CC)'
- INSTALL_LIB="$INSTALL_DATA"
-fi
-
-
-
-
-
-
-# Configure libtool if needed.
-if test $USELIBTOOL = yes; then
- disable_shared=
- disable_static=
- if test "x$LTSHARED" = xno; then
- disable_shared="--disable-shared"
- fi
- if test "x$LTSTATIC" = xno; then
- disable_static="--disable-static"
- fi
- $srcdir/ltconfig $disable_shared $disable_static $srcdir/ltmain.sh
-fi
-
-# Select memory manager depending on user input.
-# If no "-enable-maxmem", use jmemnobs
-MEMORYMGR='jmemnobs.$(O)'
-MAXMEM="no"
-# Check whether --enable-maxmem or --disable-maxmem was given.
-if test "${enable_maxmem+set}" = set; then
- enableval="$enable_maxmem"
- MAXMEM="$enableval"
-fi
-
-# support --with-maxmem for backwards compatibility with IJG V5.
-# Check whether --with-maxmem or --without-maxmem was given.
-if test "${with_maxmem+set}" = set; then
- withval="$with_maxmem"
- MAXMEM="$withval"
-fi
-
-if test "x$MAXMEM" = xyes; then
- MAXMEM=1
-fi
-if test "x$MAXMEM" != xno; then
- if test -n "`echo $MAXMEM | sed 's/[0-9]//g'`"; then
- { echo "configure: error: non-numeric argument to --enable-maxmem" 1>&2; exit 1; }
- fi
- DEFAULTMAXMEM=`expr $MAXMEM \* 1048576`
-cat >> confdefs.h <<EOF
-#define DEFAULT_MAX_MEM ${DEFAULTMAXMEM}
-EOF
-
-echo $ac_n "checking for 'tmpfile()'""... $ac_c" 1>&6
-echo "configure:1596: checking for 'tmpfile()'" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1598 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-int main() {
- FILE * tfile = tmpfile();
-; return 0; }
-EOF
-if { (eval echo configure:1605: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- rm -rf conftest*
- echo "$ac_t""yes" 1>&6
-MEMORYMGR='jmemansi.$(O)'
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""no" 1>&6
-MEMORYMGR='jmemname.$(O)'
-cat >> confdefs.h <<\EOF
-#define NEED_SIGNAL_CATCHER
-EOF
-
-echo $ac_n "checking for 'mktemp()'""... $ac_c" 1>&6
-echo "configure:1620: checking for 'mktemp()'" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1622 "configure"
-#include "confdefs.h"
-
-int main() {
- char fname[80]; mktemp(fname);
-; return 0; }
-EOF
-if { (eval echo configure:1629: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- rm -rf conftest*
- echo "$ac_t""yes" 1>&6
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define NO_MKTEMP
-EOF
-
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-fi
-
-
-# Extract the library version ID from jpeglib.h.
-echo $ac_n "checking libjpeg version number""... $ac_c" 1>&6
-echo "configure:1650: checking libjpeg version number" >&5
-JPEG_LIB_VERSION=`sed -e '/^#define JPEG_LIB_VERSION/!d' -e 's/^[^0-9]*\([0-9][0-9]*\).*$/\1/' $srcdir/jpeglib.h`
-echo "$ac_t""$JPEG_LIB_VERSION" 1>&6
-
-
-# Prepare to massage makefile.cfg correctly.
-if test $ijg_cv_have_prototypes = yes; then
- A2K_DEPS=""
- COM_A2K="# "
-else
- A2K_DEPS="ansi2knr"
- COM_A2K=""
-fi
-
-
-# ansi2knr needs -DBSD if string.h is missing
-if test $ac_cv_header_string_h = no; then
- ANSI2KNRFLAGS="-DBSD"
-else
- ANSI2KNRFLAGS=""
-fi
-
-# Substitutions to enable or disable libtool-related stuff
-if test $USELIBTOOL = yes -a $ijg_cv_have_prototypes = yes; then
- COM_LT=""
-else
- COM_LT="# "
-fi
-
-if test "x$LTSHARED" != xno; then
- FORCE_INSTALL_LIB="install-lib"
-else
- FORCE_INSTALL_LIB=""
-fi
-
-# Set up -I directives
-if test "x$srcdir" = x.; then
- INCLUDEFLAGS='-I$(srcdir)'
-else
- INCLUDEFLAGS='-I. -I$(srcdir)'
-fi
-
-trap '' 1 2 15
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-DEFS=-DHAVE_CONFIG_H
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
- case "\$ac_option" in
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12"
- exit 0 ;;
- -help | --help | --hel | --he | --h)
- echo "\$ac_cs_usage"; exit 0 ;;
- *) echo "\$ac_cs_usage"; exit 1 ;;
- esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile:makefile.cfg jconfig.h:jconfig.cfg" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@CC@%$CC%g
-s%@CPP@%$CPP%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@RANLIB@%$RANLIB%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@O@%$O%g
-s%@A@%$A%g
-s%@LN@%$LN%g
-s%@INSTALL_LIB@%$INSTALL_LIB%g
-s%@MEMORYMGR@%$MEMORYMGR%g
-s%@JPEG_LIB_VERSION@%$JPEG_LIB_VERSION%g
-s%@A2K_DEPS@%$A2K_DEPS%g
-s%@COM_A2K@%$COM_A2K%g
-s%@ANSI2KNRFLAGS@%$ANSI2KNRFLAGS%g
-s%@COM_LT@%$COM_LT%g
-s%@FORCE_INSTALL_LIB@%$FORCE_INSTALL_LIB%g
-s%@INCLUDEFLAGS@%$INCLUDEFLAGS%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
- fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
- fi
-done
-if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile:makefile.cfg"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- *) ac_file_in="${ac_file}.in" ;;
- esac
-
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
- # Remove last slash and all that follows it. Not all systems have dirname.
- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
- # The file is in a subdirectory.
- test ! -d "$ac_dir" && mkdir "$ac_dir"
- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
- # A "../" for each directory in $ac_dir_suffix.
- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
- else
- ac_dir_suffix= ac_dots=
- fi
-
- case "$ac_given_srcdir" in
- .) srcdir=.
- if test -z "$ac_dots"; then top_srcdir=.
- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
- *) # Relative path.
- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
- top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
-
- case "$ac_given_INSTALL" in
- [/$]*) INSTALL="$ac_given_INSTALL" ;;
- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
- esac
-
- echo creating "$ac_file"
- rm -f "$ac_file"
- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
- case "$ac_file" in
- *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
- *) ac_comsub= ;;
- esac
-
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
-ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
-ac_dC='\3'
-ac_dD='%g'
-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
-ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-ac_uB='\([ ]\)%\1#\2define\3'
-ac_uC=' '
-ac_uD='\4%g'
-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-ac_eB='$%\1#\2define\3'
-ac_eC=' '
-ac_eD='%g'
-
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="jconfig.h:jconfig.cfg"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- *) ac_file_in="${ac_file}.in" ;;
- esac
-
- echo creating $ac_file
-
- rm -f conftest.frag conftest.in conftest.out
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- cat $ac_file_inputs > conftest.in
-
-EOF
-
-# Transform confdefs.h into a sed script conftest.vals that substitutes
-# the proper values into config.h.in to produce config.h. And first:
-# Protect against being on the right side of a sed subst in config.status.
-# Protect against being in an unquoted here document in config.status.
-rm -f conftest.vals
-cat > conftest.hdr <<\EOF
-s/[\\&%]/\\&/g
-s%[\\$`]%\\&%g
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
-s%ac_d%ac_u%gp
-s%ac_u%ac_e%gp
-EOF
-sed -n -f conftest.hdr confdefs.h > conftest.vals
-rm -f conftest.hdr
-
-# This sed command replaces #undef with comments. This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >> conftest.vals <<\EOF
-EOF
-
-# Break up conftest.vals because some shells have a limit on
-# the size of here documents, and old seds have small limits too.
-
-rm -f conftest.tail
-while :
-do
- ac_lines=`grep -c . conftest.vals`
- # grep -c gives empty output for an empty file on some AIX systems.
- if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
- # Write a limited-size here document to conftest.frag.
- echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
- sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
- echo 'CEOF
- sed -f conftest.frag conftest.in > conftest.out
- rm -f conftest.in
- mv conftest.out conftest.in
-' >> $CONFIG_STATUS
- sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
- rm -f conftest.vals
- mv conftest.tail conftest.vals
-done
-rm -f conftest.vals
-
-cat >> $CONFIG_STATUS <<\EOF
- rm -f conftest.frag conftest.h
- echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
- cat conftest.in >> conftest.h
- rm -f conftest.in
- if cmp -s $ac_file conftest.h 2>/dev/null; then
- echo "$ac_file is unchanged"
- rm -f conftest.h
- else
- # Remove last slash and all that follows it. Not all systems have dirname.
- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
- # The file is in a subdirectory.
- test ! -d "$ac_dir" && mkdir "$ac_dir"
- fi
- rm -f $ac_file
- mv conftest.h $ac_file
- fi
-fi; done
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
diff --git a/libjpegtwrp/djpeg.1 b/libjpegtwrp/djpeg.1
deleted file mode 100644
index 11beb6a51..000000000
--- a/libjpegtwrp/djpeg.1
+++ /dev/null
@@ -1,253 +0,0 @@
-.TH DJPEG 1 "22 August 1997"
-.SH NAME
-djpeg \- decompress a JPEG file to an image file
-.SH SYNOPSIS
-.B djpeg
-[
-.I options
-]
-[
-.I filename
-]
-.LP
-.SH DESCRIPTION
-.LP
-.B djpeg
-decompresses the named JPEG file, or the standard input if no file is named,
-and produces an image file on the standard output. PBMPLUS (PPM/PGM), BMP,
-GIF, Targa, or RLE (Utah Raster Toolkit) output format can be selected.
-(RLE is supported only if the URT library is available.)
-.SH OPTIONS
-All switch names may be abbreviated; for example,
-.B \-grayscale
-may be written
-.B \-gray
-or
-.BR \-gr .
-Most of the "basic" switches can be abbreviated to as little as one letter.
-Upper and lower case are equivalent (thus
-.B \-BMP
-is the same as
-.BR \-bmp ).
-British spellings are also accepted (e.g.,
-.BR \-greyscale ),
-though for brevity these are not mentioned below.
-.PP
-The basic switches are:
-.TP
-.BI \-colors " N"
-Reduce image to at most N colors. This reduces the number of colors used in
-the output image, so that it can be displayed on a colormapped display or
-stored in a colormapped file format. For example, if you have an 8-bit
-display, you'd need to reduce to 256 or fewer colors.
-.TP
-.BI \-quantize " N"
-Same as
-.BR \-colors .
-.B \-colors
-is the recommended name,
-.B \-quantize
-is provided only for backwards compatibility.
-.TP
-.B \-fast
-Select recommended processing options for fast, low quality output. (The
-default options are chosen for highest quality output.) Currently, this is
-equivalent to \fB\-dct fast \-nosmooth \-onepass \-dither ordered\fR.
-.TP
-.B \-grayscale
-Force gray-scale output even if JPEG file is color. Useful for viewing on
-monochrome displays; also,
-.B djpeg
-runs noticeably faster in this mode.
-.TP
-.BI \-scale " M/N"
-Scale the output image by a factor M/N. Currently the scale factor must be
-1/1, 1/2, 1/4, or 1/8. Scaling is handy if the image is larger than your
-screen; also,
-.B djpeg
-runs much faster when scaling down the output.
-.TP
-.B \-bmp
-Select BMP output format (Windows flavor). 8-bit colormapped format is
-emitted if
-.B \-colors
-or
-.B \-grayscale
-is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color
-format is emitted.
-.TP
-.B \-gif
-Select GIF output format. Since GIF does not support more than 256 colors,
-.B \-colors 256
-is assumed (unless you specify a smaller number of colors).
-.TP
-.B \-os2
-Select BMP output format (OS/2 1.x flavor). 8-bit colormapped format is
-emitted if
-.B \-colors
-or
-.B \-grayscale
-is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color
-format is emitted.
-.TP
-.B \-pnm
-Select PBMPLUS (PPM/PGM) output format (this is the default format).
-PGM is emitted if the JPEG file is gray-scale or if
-.B \-grayscale
-is specified; otherwise PPM is emitted.
-.TP
-.B \-rle
-Select RLE output format. (Requires URT library.)
-.TP
-.B \-targa
-Select Targa output format. Gray-scale format is emitted if the JPEG file is
-gray-scale or if
-.B \-grayscale
-is specified; otherwise, colormapped format is emitted if
-.B \-colors
-is specified; otherwise, 24-bit full-color format is emitted.
-.PP
-Switches for advanced users:
-.TP
-.B \-dct int
-Use integer DCT method (default).
-.TP
-.B \-dct fast
-Use fast integer DCT (less accurate).
-.TP
-.B \-dct float
-Use floating-point DCT method.
-The float method is very slightly more accurate than the int method, but is
-much slower unless your machine has very fast floating-point hardware. Also
-note that results of the floating-point method may vary slightly across
-machines, while the integer methods should give the same results everywhere.
-The fast integer method is much less accurate than the other two.
-.TP
-.B \-dither fs
-Use Floyd-Steinberg dithering in color quantization.
-.TP
-.B \-dither ordered
-Use ordered dithering in color quantization.
-.TP
-.B \-dither none
-Do not use dithering in color quantization.
-By default, Floyd-Steinberg dithering is applied when quantizing colors; this
-is slow but usually produces the best results. Ordered dither is a compromise
-between speed and quality; no dithering is fast but usually looks awful. Note
-that these switches have no effect unless color quantization is being done.
-Ordered dither is only available in
-.B \-onepass
-mode.
-.TP
-.BI \-map " file"
-Quantize to the colors used in the specified image file. This is useful for
-producing multiple files with identical color maps, or for forcing a
-predefined set of colors to be used. The
-.I file
-must be a GIF or PPM file. This option overrides
-.B \-colors
-and
-.BR \-onepass .
-.TP
-.B \-nosmooth
-Use a faster, lower-quality upsampling routine.
-.TP
-.B \-onepass
-Use one-pass instead of two-pass color quantization. The one-pass method is
-faster and needs less memory, but it produces a lower-quality image.
-.B \-onepass
-is ignored unless you also say
-.B \-colors
-.IR N .
-Also, the one-pass method is always used for gray-scale output (the two-pass
-method is no improvement then).
-.TP
-.BI \-maxmemory " N"
-Set limit for amount of memory to use in processing large images. Value is
-in thousands of bytes, or millions of bytes if "M" is attached to the
-number. For example,
-.B \-max 4m
-selects 4000000 bytes. If more space is needed, temporary files will be used.
-.TP
-.BI \-outfile " name"
-Send output image to the named file, not to standard output.
-.TP
-.B \-verbose
-Enable debug printout. More
-.BR \-v 's
-give more output. Also, version information is printed at startup.
-.TP
-.B \-debug
-Same as
-.BR \-verbose .
-.SH EXAMPLES
-.LP
-This example decompresses the JPEG file foo.jpg, quantizes it to
-256 colors, and saves the output in 8-bit BMP format in foo.bmp:
-.IP
-.B djpeg \-colors 256 \-bmp
-.I foo.jpg
-.B >
-.I foo.bmp
-.SH HINTS
-To get a quick preview of an image, use the
-.B \-grayscale
-and/or
-.B \-scale
-switches.
-.B \-grayscale \-scale 1/8
-is the fastest case.
-.PP
-Several options are available that trade off image quality to gain speed.
-.B \-fast
-turns on the recommended settings.
-.PP
-.B \-dct fast
-and/or
-.B \-nosmooth
-gain speed at a small sacrifice in quality.
-When producing a color-quantized image,
-.B \-onepass \-dither ordered
-is fast but much lower quality than the default behavior.
-.B \-dither none
-may give acceptable results in two-pass mode, but is seldom tolerable in
-one-pass mode.
-.PP
-If you are fortunate enough to have very fast floating point hardware,
-\fB\-dct float\fR may be even faster than \fB\-dct fast\fR. But on most
-machines \fB\-dct float\fR is slower than \fB\-dct int\fR; in this case it is
-not worth using, because its theoretical accuracy advantage is too small to be
-significant in practice.
-.SH ENVIRONMENT
-.TP
-.B JPEGMEM
-If this environment variable is set, its value is the default memory limit.
-The value is specified as described for the
-.B \-maxmemory
-switch.
-.B JPEGMEM
-overrides the default value specified when the program was compiled, and
-itself is overridden by an explicit
-.BR \-maxmemory .
-.SH SEE ALSO
-.BR cjpeg (1),
-.BR jpegtran (1),
-.BR rdjpgcom (1),
-.BR wrjpgcom (1)
-.br
-.BR ppm (5),
-.BR pgm (5)
-.br
-Wallace, Gregory K. "The JPEG Still Picture Compression Standard",
-Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
-.SH AUTHOR
-Independent JPEG Group
-.SH BUGS
-Arithmetic coding is not supported for legal reasons.
-.PP
-To avoid the Unisys LZW patent,
-.B djpeg
-produces uncompressed GIF files. These are larger than they should be, but
-are readable by standard GIF decoders.
-.PP
-Still not as fast as we'd like.
diff --git a/libjpegtwrp/djpeg.c b/libjpegtwrp/djpeg.c
deleted file mode 100644
index e099e90ae..000000000
--- a/libjpegtwrp/djpeg.c
+++ /dev/null
@@ -1,616 +0,0 @@
-/*
- * djpeg.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a command-line user interface for the JPEG decompressor.
- * It should work on any system with Unix- or MS-DOS-style command lines.
- *
- * Two different command line styles are permitted, depending on the
- * compile-time switch TWO_FILE_COMMANDLINE:
- * djpeg [options] inputfile outputfile
- * djpeg [options] [inputfile]
- * In the second style, output is always to standard output, which you'd
- * normally redirect to a file or pipe to some other program. Input is
- * either from a named file or from standard input (typically redirected).
- * The second style is convenient on Unix but is unhelpful on systems that
- * don't support pipes. Also, you MUST use the first style if your system
- * doesn't do binary I/O to stdin/stdout.
- * To simplify script writing, the "-outfile" switch is provided. The syntax
- * djpeg [options] -outfile outputfile inputfile
- * works regardless of which command line style is used.
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-#include "jversion.h" /* for version message */
-
-#include <ctype.h> /* to declare isprint() */
-
-#ifdef USE_CCOMMAND /* command-line reader for Macintosh */
-#ifdef __MWERKS__
-#include <SIOUX.h> /* Metrowerks needs this */
-#include <console.h> /* ... and this */
-#endif
-#ifdef THINK_C
-#include <console.h> /* Think declares it here */
-#endif
-#endif
-
-
-/* Create the add-on message string table. */
-
-#define JMESSAGE(code,string) string ,
-
-static const char * const cdjpeg_message_table[] = {
-#include "cderror.h"
- NULL
-};
-
-
-/*
- * This list defines the known output image formats
- * (not all of which need be supported by a given version).
- * You can change the default output format by defining DEFAULT_FMT;
- * indeed, you had better do so if you undefine PPM_SUPPORTED.
- */
-
-typedef enum {
- FMT_BMP, /* BMP format (Windows flavor) */
- FMT_GIF, /* GIF format */
- FMT_OS2, /* BMP format (OS/2 flavor) */
- FMT_PPM, /* PPM/PGM (PBMPLUS formats) */
- FMT_RLE, /* RLE format */
- FMT_TARGA, /* Targa format */
- FMT_TIFF /* TIFF format */
-} IMAGE_FORMATS;
-
-#ifndef DEFAULT_FMT /* so can override from CFLAGS in Makefile */
-#define DEFAULT_FMT FMT_PPM
-#endif
-
-static IMAGE_FORMATS requested_fmt;
-
-
-/*
- * Argument-parsing code.
- * The switch parser is designed to be useful with DOS-style command line
- * syntax, ie, intermixed switches and file names, where only the switches
- * to the left of a given file name affect processing of that file.
- * The main program in this file doesn't actually use this capability...
- */
-
-
-static const char * progname; /* program name for error messages */
-static char * outfilename; /* for -outfile switch */
-
-
-LOCAL(void)
-usage (void)
-/* complain about bad command line */
-{
- fprintf(stderr, "usage: %s [switches] ", progname);
-#ifdef TWO_FILE_COMMANDLINE
- fprintf(stderr, "inputfile outputfile\n");
-#else
- fprintf(stderr, "[inputfile]\n");
-#endif
-
- fprintf(stderr, "Switches (names may be abbreviated):\n");
- fprintf(stderr, " -colors N Reduce image to no more than N colors\n");
- fprintf(stderr, " -fast Fast, low-quality processing\n");
- fprintf(stderr, " -grayscale Force grayscale output\n");
-#ifdef IDCT_SCALING_SUPPORTED
- fprintf(stderr, " -scale M/N Scale output image by fraction M/N, eg, 1/8\n");
-#endif
-#ifdef BMP_SUPPORTED
- fprintf(stderr, " -bmp Select BMP output format (Windows style)%s\n",
- (DEFAULT_FMT == FMT_BMP ? " (default)" : ""));
-#endif
-#ifdef GIF_SUPPORTED
- fprintf(stderr, " -gif Select GIF output format%s\n",
- (DEFAULT_FMT == FMT_GIF ? " (default)" : ""));
-#endif
-#ifdef BMP_SUPPORTED
- fprintf(stderr, " -os2 Select BMP output format (OS/2 style)%s\n",
- (DEFAULT_FMT == FMT_OS2 ? " (default)" : ""));
-#endif
-#ifdef PPM_SUPPORTED
- fprintf(stderr, " -pnm Select PBMPLUS (PPM/PGM) output format%s\n",
- (DEFAULT_FMT == FMT_PPM ? " (default)" : ""));
-#endif
-#ifdef RLE_SUPPORTED
- fprintf(stderr, " -rle Select Utah RLE output format%s\n",
- (DEFAULT_FMT == FMT_RLE ? " (default)" : ""));
-#endif
-#ifdef TARGA_SUPPORTED
- fprintf(stderr, " -targa Select Targa output format%s\n",
- (DEFAULT_FMT == FMT_TARGA ? " (default)" : ""));
-#endif
- fprintf(stderr, "Switches for advanced users:\n");
-#ifdef DCT_ISLOW_SUPPORTED
- fprintf(stderr, " -dct int Use integer DCT method%s\n",
- (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
-#endif
-#ifdef DCT_IFAST_SUPPORTED
- fprintf(stderr, " -dct fast Use fast integer DCT (less accurate)%s\n",
- (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
- fprintf(stderr, " -dct float Use floating-point DCT method%s\n",
- (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
-#endif
- fprintf(stderr, " -dither fs Use F-S dithering (default)\n");
- fprintf(stderr, " -dither none Don't use dithering in quantization\n");
- fprintf(stderr, " -dither ordered Use ordered dither (medium speed, quality)\n");
-#ifdef QUANT_2PASS_SUPPORTED
- fprintf(stderr, " -map FILE Map to colors used in named image file\n");
-#endif
- fprintf(stderr, " -nosmooth Don't use high-quality upsampling\n");
-#ifdef QUANT_1PASS_SUPPORTED
- fprintf(stderr, " -onepass Use 1-pass quantization (fast, low quality)\n");
-#endif
- fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n");
- fprintf(stderr, " -outfile name Specify name for output file\n");
- fprintf(stderr, " -verbose or -debug Emit debug output\n");
- exit(EXIT_FAILURE);
-}
-
-
-LOCAL(int)
-parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
- int last_file_arg_seen, boolean for_real)
-/* Parse optional switches.
- * Returns argv[] index of first file-name argument (== argc if none).
- * Any file names with indexes <= last_file_arg_seen are ignored;
- * they have presumably been processed in a previous iteration.
- * (Pass 0 for last_file_arg_seen on the first or only iteration.)
- * for_real is FALSE on the first (dummy) pass; we may skip any expensive
- * processing.
- */
-{
- int argn;
- char * arg;
-
- /* Set up default JPEG parameters. */
- requested_fmt = DEFAULT_FMT; /* set default output file format */
- outfilename = NULL;
- cinfo->err->trace_level = 0;
-
- /* Scan command line options, adjust parameters */
-
- for (argn = 1; argn < argc; argn++) {
- arg = argv[argn];
- if (*arg != '-') {
- /* Not a switch, must be a file name argument */
- if (argn <= last_file_arg_seen) {
- outfilename = NULL; /* -outfile applies to just one input file */
- continue; /* ignore this name if previously processed */
- }
- break; /* else done parsing switches */
- }
- arg++; /* advance past switch marker character */
-
- if (keymatch(arg, "bmp", 1)) {
- /* BMP output format. */
- requested_fmt = FMT_BMP;
-
- } else if (keymatch(arg, "colors", 1) || keymatch(arg, "colours", 1) ||
- keymatch(arg, "quantize", 1) || keymatch(arg, "quantise", 1)) {
- /* Do color quantization. */
- int val;
-
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (sscanf(argv[argn], "%d", &val) != 1)
- usage();
- cinfo->desired_number_of_colors = val;
- cinfo->quantize_colors = TRUE;
-
- } else if (keymatch(arg, "dct", 2)) {
- /* Select IDCT algorithm. */
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (keymatch(argv[argn], "int", 1)) {
- cinfo->dct_method = JDCT_ISLOW;
- } else if (keymatch(argv[argn], "fast", 2)) {
- cinfo->dct_method = JDCT_IFAST;
- } else if (keymatch(argv[argn], "float", 2)) {
- cinfo->dct_method = JDCT_FLOAT;
- } else
- usage();
-
- } else if (keymatch(arg, "dither", 2)) {
- /* Select dithering algorithm. */
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (keymatch(argv[argn], "fs", 2)) {
- cinfo->dither_mode = JDITHER_FS;
- } else if (keymatch(argv[argn], "none", 2)) {
- cinfo->dither_mode = JDITHER_NONE;
- } else if (keymatch(argv[argn], "ordered", 2)) {
- cinfo->dither_mode = JDITHER_ORDERED;
- } else
- usage();
-
- } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
- /* Enable debug printouts. */
- /* On first -d, print version identification */
- static boolean printed_version = FALSE;
-
- if (! printed_version) {
- fprintf(stderr, "Independent JPEG Group's DJPEG, version %s\n%s\n",
- JVERSION, JCOPYRIGHT);
- printed_version = TRUE;
- }
- cinfo->err->trace_level++;
-
- } else if (keymatch(arg, "fast", 1)) {
- /* Select recommended processing options for quick-and-dirty output. */
- cinfo->two_pass_quantize = FALSE;
- cinfo->dither_mode = JDITHER_ORDERED;
- if (! cinfo->quantize_colors) /* don't override an earlier -colors */
- cinfo->desired_number_of_colors = 216;
- cinfo->dct_method = JDCT_FASTEST;
- cinfo->do_fancy_upsampling = FALSE;
-
- } else if (keymatch(arg, "gif", 1)) {
- /* GIF output format. */
- requested_fmt = FMT_GIF;
-
- } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) {
- /* Force monochrome output. */
- cinfo->out_color_space = JCS_GRAYSCALE;
-
- } else if (keymatch(arg, "map", 3)) {
- /* Quantize to a color map taken from an input file. */
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (for_real) { /* too expensive to do twice! */
-#ifdef QUANT_2PASS_SUPPORTED /* otherwise can't quantize to supplied map */
- FILE * mapfile;
-
- if ((mapfile = fopen(argv[argn], READ_BINARY)) == NULL) {
- fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
- exit(EXIT_FAILURE);
- }
- read_color_map(cinfo, mapfile);
- fclose(mapfile);
- cinfo->quantize_colors = TRUE;
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
- }
-
- } else if (keymatch(arg, "maxmemory", 3)) {
- /* Maximum memory in Kb (or Mb with 'm'). */
- long lval;
- char ch = 'x';
-
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
- usage();
- if (ch == 'm' || ch == 'M')
- lval *= 1000L;
- cinfo->mem->max_memory_to_use = lval * 1000L;
-
- } else if (keymatch(arg, "nosmooth", 3)) {
- /* Suppress fancy upsampling */
- cinfo->do_fancy_upsampling = FALSE;
-
- } else if (keymatch(arg, "onepass", 3)) {
- /* Use fast one-pass quantization. */
- cinfo->two_pass_quantize = FALSE;
-
- } else if (keymatch(arg, "os2", 3)) {
- /* BMP output format (OS/2 flavor). */
- requested_fmt = FMT_OS2;
-
- } else if (keymatch(arg, "outfile", 4)) {
- /* Set output file name. */
- if (++argn >= argc) /* advance to next argument */
- usage();
- outfilename = argv[argn]; /* save it away for later use */
-
- } else if (keymatch(arg, "pnm", 1) || keymatch(arg, "ppm", 1)) {
- /* PPM/PGM output format. */
- requested_fmt = FMT_PPM;
-
- } else if (keymatch(arg, "rle", 1)) {
- /* RLE output format. */
- requested_fmt = FMT_RLE;
-
- } else if (keymatch(arg, "scale", 1)) {
- /* Scale the output image by a fraction M/N. */
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (sscanf(argv[argn], "%d/%d",
- &cinfo->scale_num, &cinfo->scale_denom) != 2)
- usage();
-
- } else if (keymatch(arg, "targa", 1)) {
- /* Targa output format. */
- requested_fmt = FMT_TARGA;
-
- } else {
- usage(); /* bogus switch */
- }
- }
-
- return argn; /* return index of next arg (file name) */
-}
-
-
-/*
- * Marker processor for COM and interesting APPn markers.
- * This replaces the library's built-in processor, which just skips the marker.
- * We want to print out the marker as text, to the extent possible.
- * Note this code relies on a non-suspending data source.
- */
-
-LOCAL(unsigned int)
-jpeg_getc (j_decompress_ptr cinfo)
-/* Read next byte */
-{
- struct jpeg_source_mgr * datasrc = cinfo->src;
-
- if (datasrc->bytes_in_buffer == 0) {
- if (! (*datasrc->fill_input_buffer) (cinfo))
- ERREXIT(cinfo, JERR_CANT_SUSPEND);
- }
- datasrc->bytes_in_buffer--;
- return GETJOCTET(*datasrc->next_input_byte++);
-}
-
-
-METHODDEF(boolean)
-print_text_marker (j_decompress_ptr cinfo)
-{
- boolean traceit = (cinfo->err->trace_level >= 1);
- INT32 length;
- unsigned int ch;
- unsigned int lastch = 0;
-
- length = jpeg_getc(cinfo) << 8;
- length += jpeg_getc(cinfo);
- length -= 2; /* discount the length word itself */
-
- if (traceit) {
- if (cinfo->unread_marker == JPEG_COM)
- fprintf(stderr, "Comment, length %ld:\n", (long) length);
- else /* assume it is an APPn otherwise */
- fprintf(stderr, "APP%d, length %ld:\n",
- cinfo->unread_marker - JPEG_APP0, (long) length);
- }
-
- while (--length >= 0) {
- ch = jpeg_getc(cinfo);
- if (traceit) {
- /* Emit the character in a readable form.
- * Nonprintables are converted to \nnn form,
- * while \ is converted to \\.
- * Newlines in CR, CR/LF, or LF form will be printed as one newline.
- */
- if (ch == '\r') {
- fprintf(stderr, "\n");
- } else if (ch == '\n') {
- if (lastch != '\r')
- fprintf(stderr, "\n");
- } else if (ch == '\\') {
- fprintf(stderr, "\\\\");
- } else if (isprint(ch)) {
- putc(ch, stderr);
- } else {
- fprintf(stderr, "\\%03o", ch);
- }
- lastch = ch;
- }
- }
-
- if (traceit)
- fprintf(stderr, "\n");
-
- return TRUE;
-}
-
-
-/*
- * The main program.
- */
-
-int
-main (int argc, char **argv)
-{
- struct jpeg_decompress_struct cinfo;
- struct jpeg_error_mgr jerr;
-#ifdef PROGRESS_REPORT
- struct cdjpeg_progress_mgr progress;
-#endif
- int file_index;
- djpeg_dest_ptr dest_mgr = NULL;
- FILE * input_file;
- FILE * output_file;
- JDIMENSION num_scanlines;
-
- /* On Mac, fetch a command line. */
-#ifdef USE_CCOMMAND
- argc = ccommand(&argv);
-#endif
-
- progname = argv[0];
- if (progname == NULL || progname[0] == 0)
- progname = "djpeg"; /* in case C library doesn't provide it */
-
- /* Initialize the JPEG decompression object with default error handling. */
- cinfo.err = jpeg_std_error(&jerr);
- jpeg_create_decompress(&cinfo);
- /* Add some application-specific error messages (from cderror.h) */
- jerr.addon_message_table = cdjpeg_message_table;
- jerr.first_addon_message = JMSG_FIRSTADDONCODE;
- jerr.last_addon_message = JMSG_LASTADDONCODE;
-
- /* Insert custom marker processor for COM and APP12.
- * APP12 is used by some digital camera makers for textual info,
- * so we provide the ability to display it as text.
- * If you like, additional APPn marker types can be selected for display,
- * but don't try to override APP0 or APP14 this way (see libjpeg.doc).
- */
- jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker);
- jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker);
-
- /* Now safe to enable signal catcher. */
-#ifdef NEED_SIGNAL_CATCHER
- enable_signal_catcher((j_common_ptr) &cinfo);
-#endif
-
- /* Scan command line to find file names. */
- /* It is convenient to use just one switch-parsing routine, but the switch
- * values read here are ignored; we will rescan the switches after opening
- * the input file.
- * (Exception: tracing level set here controls verbosity for COM markers
- * found during jpeg_read_header...)
- */
-
- file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
-
-#ifdef TWO_FILE_COMMANDLINE
- /* Must have either -outfile switch or explicit output file name */
- if (outfilename == NULL) {
- if (file_index != argc-2) {
- fprintf(stderr, "%s: must name one input and one output file\n",
- progname);
- usage();
- }
- outfilename = argv[file_index+1];
- } else {
- if (file_index != argc-1) {
- fprintf(stderr, "%s: must name one input and one output file\n",
- progname);
- usage();
- }
- }
-#else
- /* Unix style: expect zero or one file name */
- if (file_index < argc-1) {
- fprintf(stderr, "%s: only one input file\n", progname);
- usage();
- }
-#endif /* TWO_FILE_COMMANDLINE */
-
- /* Open the input file. */
- if (file_index < argc) {
- if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
- fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
- exit(EXIT_FAILURE);
- }
- } else {
- /* default input file is stdin */
- input_file = read_stdin();
- }
-
- /* Open the output file. */
- if (outfilename != NULL) {
- if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
- fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
- exit(EXIT_FAILURE);
- }
- } else {
- /* default output file is stdout */
- output_file = write_stdout();
- }
-
-#ifdef PROGRESS_REPORT
- start_progress_monitor((j_common_ptr) &cinfo, &progress);
-#endif
-
- /* Specify data source for decompression */
- jpeg_stdio_src(&cinfo, input_file);
-
- /* Read file header, set default decompression parameters */
- (void) jpeg_read_header(&cinfo, TRUE);
-
- /* Adjust default decompression parameters by re-parsing the options */
- file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
-
- /* Initialize the output module now to let it override any crucial
- * option settings (for instance, GIF wants to force color quantization).
- */
- switch (requested_fmt) {
-#ifdef BMP_SUPPORTED
- case FMT_BMP:
- dest_mgr = jinit_write_bmp(&cinfo, FALSE);
- break;
- case FMT_OS2:
- dest_mgr = jinit_write_bmp(&cinfo, TRUE);
- break;
-#endif
-#ifdef GIF_SUPPORTED
- case FMT_GIF:
- dest_mgr = jinit_write_gif(&cinfo);
- break;
-#endif
-#ifdef PPM_SUPPORTED
- case FMT_PPM:
- dest_mgr = jinit_write_ppm(&cinfo);
- break;
-#endif
-#ifdef RLE_SUPPORTED
- case FMT_RLE:
- dest_mgr = jinit_write_rle(&cinfo);
- break;
-#endif
-#ifdef TARGA_SUPPORTED
- case FMT_TARGA:
- dest_mgr = jinit_write_targa(&cinfo);
- break;
-#endif
- default:
- ERREXIT(&cinfo, JERR_UNSUPPORTED_FORMAT);
- break;
- }
- dest_mgr->output_file = output_file;
-
- /* Start decompressor */
- (void) jpeg_start_decompress(&cinfo);
-
- /* Write output file header */
- (*dest_mgr->start_output) (&cinfo, dest_mgr);
-
- /* Process data */
- while (cinfo.output_scanline < cinfo.output_height) {
- num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
- dest_mgr->buffer_height);
- (*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
- }
-
-#ifdef PROGRESS_REPORT
- /* Hack: count final pass as done in case finish_output does an extra pass.
- * The library won't have updated completed_passes.
- */
- progress.pub.completed_passes = progress.pub.total_passes;
-#endif
-
- /* Finish decompression and release memory.
- * I must do it in this order because output module has allocated memory
- * of lifespan JPOOL_IMAGE; it needs to finish before releasing memory.
- */
- (*dest_mgr->finish_output) (&cinfo, dest_mgr);
- (void) jpeg_finish_decompress(&cinfo);
- jpeg_destroy_decompress(&cinfo);
-
- /* Close files, if we opened them */
- if (input_file != stdin)
- fclose(input_file);
- if (output_file != stdout)
- fclose(output_file);
-
-#ifdef PROGRESS_REPORT
- end_progress_monitor((j_common_ptr) &cinfo);
-#endif
-
- /* All done. */
- exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
- return 0; /* suppress no-return-value warnings */
-}
diff --git a/libjpegtwrp/example.c b/libjpegtwrp/example.c
deleted file mode 100644
index 7fc354f04..000000000
--- a/libjpegtwrp/example.c
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * example.c
- *
- * This file illustrates how to use the IJG code as a subroutine library
- * to read or write JPEG image files. You should look at this code in
- * conjunction with the documentation file libjpeg.doc.
- *
- * This code will not do anything useful as-is, but it may be helpful as a
- * skeleton for constructing routines that call the JPEG library.
- *
- * We present these routines in the same coding style used in the JPEG code
- * (ANSI function definitions, etc); but you are of course free to code your
- * routines in a different style if you prefer.
- */
-
-#include <stdio.h>
-
-/*
- * Include file for users of JPEG library.
- * You will need to have included system headers that define at least
- * the typedefs FILE and size_t before you can include jpeglib.h.
- * (stdio.h is sufficient on ANSI-conforming systems.)
- * You may also wish to include "jerror.h".
- */
-
-#include "jpeglib.h"
-
-/*
- * <setjmp.h> is used for the optional error recovery mechanism shown in
- * the second part of the example.
- */
-
-#include <setjmp.h>
-
-
-
-/******************** JPEG COMPRESSION SAMPLE INTERFACE *******************/
-
-/* This half of the example shows how to feed data into the JPEG compressor.
- * We present a minimal version that does not worry about refinements such
- * as error recovery (the JPEG code will just exit() if it gets an error).
- */
-
-
-/*
- * IMAGE DATA FORMATS:
- *
- * The standard input image format is a rectangular array of pixels, with
- * each pixel having the same number of "component" values (color channels).
- * Each pixel row is an array of JSAMPLEs (which typically are unsigned chars).
- * If you are working with color data, then the color values for each pixel
- * must be adjacent in the row; for example, R,G,B,R,G,B,R,G,B,... for 24-bit
- * RGB color.
- *
- * For this example, we'll assume that this data structure matches the way
- * our application has stored the image in memory, so we can just pass a
- * pointer to our image buffer. In particular, let's say that the image is
- * RGB color and is described by:
- */
-
-extern JSAMPLE * image_buffer; /* Points to large array of R,G,B-order data */
-extern int image_height; /* Number of rows in image */
-extern int image_width; /* Number of columns in image */
-
-
-/*
- * Sample routine for JPEG compression. We assume that the target file name
- * and a compression quality factor are passed in.
- */
-
-GLOBAL(void)
-write_JPEG_file (char * filename, int quality)
-{
- /* This struct contains the JPEG compression parameters and pointers to
- * working space (which is allocated as needed by the JPEG library).
- * It is possible to have several such structures, representing multiple
- * compression/decompression processes, in existence at once. We refer
- * to any one struct (and its associated working data) as a "JPEG object".
- */
- struct jpeg_compress_struct cinfo;
- /* This struct represents a JPEG error handler. It is declared separately
- * because applications often want to supply a specialized error handler
- * (see the second half of this file for an example). But here we just
- * take the easy way out and use the standard error handler, which will
- * print a message on stderr and call exit() if compression fails.
- * Note that this struct must live as long as the main JPEG parameter
- * struct, to avoid dangling-pointer problems.
- */
- struct jpeg_error_mgr jerr;
- /* More stuff */
- FILE * outfile; /* target file */
- JSAMPROW row_pointer[1]; /* pointer to JSAMPLE row[s] */
- int row_stride; /* physical row width in image buffer */
-
- /* Step 1: allocate and initialize JPEG compression object */
-
- /* We have to set up the error handler first, in case the initialization
- * step fails. (Unlikely, but it could happen if you are out of memory.)
- * This routine fills in the contents of struct jerr, and returns jerr's
- * address which we place into the link field in cinfo.
- */
- cinfo.err = jpeg_std_error(&jerr);
- /* Now we can initialize the JPEG compression object. */
- jpeg_create_compress(&cinfo);
-
- /* Step 2: specify data destination (eg, a file) */
- /* Note: steps 2 and 3 can be done in either order. */
-
- /* Here we use the library-supplied code to send compressed data to a
- * stdio stream. You can also write your own code to do something else.
- * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
- * requires it in order to write binary files.
- */
- if ((outfile = fopen(filename, "wb")) == NULL) {
- fprintf(stderr, "can't open %s\n", filename);
- exit(1);
- }
- jpeg_stdio_dest(&cinfo, outfile);
-
- /* Step 3: set parameters for compression */
-
- /* First we supply a description of the input image.
- * Four fields of the cinfo struct must be filled in:
- */
- cinfo.image_width = image_width; /* image width and height, in pixels */
- cinfo.image_height = image_height;
- cinfo.input_components = 3; /* # of color components per pixel */
- cinfo.in_color_space = JCS_RGB; /* colorspace of input image */
- /* Now use the library's routine to set default compression parameters.
- * (You must set at least cinfo.in_color_space before calling this,
- * since the defaults depend on the source color space.)
- */
- jpeg_set_defaults(&cinfo);
- /* Now you can set any non-default parameters you wish to.
- * Here we just illustrate the use of quality (quantization table) scaling:
- */
- jpeg_set_quality(&cinfo, quality, TRUE /* limit to baseline-JPEG values */);
-
- /* Step 4: Start compressor */
-
- /* TRUE ensures that we will write a complete interchange-JPEG file.
- * Pass TRUE unless you are very sure of what you're doing.
- */
- jpeg_start_compress(&cinfo, TRUE);
-
- /* Step 5: while (scan lines remain to be written) */
- /* jpeg_write_scanlines(...); */
-
- /* Here we use the library's state variable cinfo.next_scanline as the
- * loop counter, so that we don't have to keep track ourselves.
- * To keep things simple, we pass one scanline per call; you can pass
- * more if you wish, though.
- */
- row_stride = image_width * 3; /* JSAMPLEs per row in image_buffer */
-
- while (cinfo.next_scanline < cinfo.image_height) {
- /* jpeg_write_scanlines expects an array of pointers to scanlines.
- * Here the array is only one element long, but you could pass
- * more than one scanline at a time if that's more convenient.
- */
- row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride];
- (void) jpeg_write_scanlines(&cinfo, row_pointer, 1);
- }
-
- /* Step 6: Finish compression */
-
- jpeg_finish_compress(&cinfo);
- /* After finish_compress, we can close the output file. */
- fclose(outfile);
-
- /* Step 7: release JPEG compression object */
-
- /* This is an important step since it will release a good deal of memory. */
- jpeg_destroy_compress(&cinfo);
-
- /* And we're done! */
-}
-
-
-/*
- * SOME FINE POINTS:
- *
- * In the above loop, we ignored the return value of jpeg_write_scanlines,
- * which is the number of scanlines actually written. We could get away
- * with this because we were only relying on the value of cinfo.next_scanline,
- * which will be incremented correctly. If you maintain additional loop
- * variables then you should be careful to increment them properly.
- * Actually, for output to a stdio stream you needn't worry, because
- * then jpeg_write_scanlines will write all the lines passed (or else exit
- * with a fatal error). Partial writes can only occur if you use a data
- * destination module that can demand suspension of the compressor.
- * (If you don't know what that's for, you don't need it.)
- *
- * If the compressor requires full-image buffers (for entropy-coding
- * optimization or a multi-scan JPEG file), it will create temporary
- * files for anything that doesn't fit within the maximum-memory setting.
- * (Note that temp files are NOT needed if you use the default parameters.)
- * On some systems you may need to set up a signal handler to ensure that
- * temporary files are deleted if the program is interrupted. See libjpeg.doc.
- *
- * Scanlines MUST be supplied in top-to-bottom order if you want your JPEG
- * files to be compatible with everyone else's. If you cannot readily read
- * your data in that order, you'll need an intermediate array to hold the
- * image. See rdtarga.c or rdbmp.c for examples of handling bottom-to-top
- * source data using the JPEG code's internal virtual-array mechanisms.
- */
-
-
-
-/******************** JPEG DECOMPRESSION SAMPLE INTERFACE *******************/
-
-/* This half of the example shows how to read data from the JPEG decompressor.
- * It's a bit more refined than the above, in that we show:
- * (a) how to modify the JPEG library's standard error-reporting behavior;
- * (b) how to allocate workspace using the library's memory manager.
- *
- * Just to make this example a little different from the first one, we'll
- * assume that we do not intend to put the whole image into an in-memory
- * buffer, but to send it line-by-line someplace else. We need a one-
- * scanline-high JSAMPLE array as a work buffer, and we will let the JPEG
- * memory manager allocate it for us. This approach is actually quite useful
- * because we don't need to remember to deallocate the buffer separately: it
- * will go away automatically when the JPEG object is cleaned up.
- */
-
-
-/*
- * ERROR HANDLING:
- *
- * The JPEG library's standard error handler (jerror.c) is divided into
- * several "methods" which you can override individually. This lets you
- * adjust the behavior without duplicating a lot of code, which you might
- * have to update with each future release.
- *
- * Our example here shows how to override the "error_exit" method so that
- * control is returned to the library's caller when a fatal error occurs,
- * rather than calling exit() as the standard error_exit method does.
- *
- * We use C's setjmp/longjmp facility to return control. This means that the
- * routine which calls the JPEG library must first execute a setjmp() call to
- * establish the return point. We want the replacement error_exit to do a
- * longjmp(). But we need to make the setjmp buffer accessible to the
- * error_exit routine. To do this, we make a private extension of the
- * standard JPEG error handler object. (If we were using C++, we'd say we
- * were making a subclass of the regular error handler.)
- *
- * Here's the extended error handler struct:
- */
-
-struct my_error_mgr {
- struct jpeg_error_mgr pub; /* "public" fields */
-
- jmp_buf setjmp_buffer; /* for return to caller */
-};
-
-typedef struct my_error_mgr * my_error_ptr;
-
-/*
- * Here's the routine that will replace the standard error_exit method:
- */
-
-METHODDEF(void)
-my_error_exit (j_common_ptr cinfo)
-{
- /* cinfo->err really points to a my_error_mgr struct, so coerce pointer */
- my_error_ptr myerr = (my_error_ptr) cinfo->err;
-
- /* Always display the message. */
- /* We could postpone this until after returning, if we chose. */
- (*cinfo->err->output_message) (cinfo);
-
- /* Return control to the setjmp point */
- longjmp(myerr->setjmp_buffer, 1);
-}
-
-
-/*
- * Sample routine for JPEG decompression. We assume that the source file name
- * is passed in. We want to return 1 on success, 0 on error.
- */
-
-
-GLOBAL(int)
-read_JPEG_file (char * filename)
-{
- /* This struct contains the JPEG decompression parameters and pointers to
- * working space (which is allocated as needed by the JPEG library).
- */
- struct jpeg_decompress_struct cinfo;
- /* We use our private extension JPEG error handler.
- * Note that this struct must live as long as the main JPEG parameter
- * struct, to avoid dangling-pointer problems.
- */
- struct my_error_mgr jerr;
- /* More stuff */
- FILE * infile; /* source file */
- JSAMPARRAY buffer; /* Output row buffer */
- int row_stride; /* physical row width in output buffer */
-
- /* In this example we want to open the input file before doing anything else,
- * so that the setjmp() error recovery below can assume the file is open.
- * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
- * requires it in order to read binary files.
- */
-
- if ((infile = fopen(filename, "rb")) == NULL) {
- fprintf(stderr, "can't open %s\n", filename);
- return 0;
- }
-
- /* Step 1: allocate and initialize JPEG decompression object */
-
- /* We set up the normal JPEG error routines, then override error_exit. */
- cinfo.err = jpeg_std_error(&jerr.pub);
- jerr.pub.error_exit = my_error_exit;
- /* Establish the setjmp return context for my_error_exit to use. */
- if (setjmp(jerr.setjmp_buffer)) {
- /* If we get here, the JPEG code has signaled an error.
- * We need to clean up the JPEG object, close the input file, and return.
- */
- jpeg_destroy_decompress(&cinfo);
- fclose(infile);
- return 0;
- }
- /* Now we can initialize the JPEG decompression object. */
- jpeg_create_decompress(&cinfo);
-
- /* Step 2: specify data source (eg, a file) */
-
- jpeg_stdio_src(&cinfo, infile);
-
- /* Step 3: read file parameters with jpeg_read_header() */
-
- (void) jpeg_read_header(&cinfo, TRUE);
- /* We can ignore the return value from jpeg_read_header since
- * (a) suspension is not possible with the stdio data source, and
- * (b) we passed TRUE to reject a tables-only JPEG file as an error.
- * See libjpeg.doc for more info.
- */
-
- /* Step 4: set parameters for decompression */
-
- /* In this example, we don't need to change any of the defaults set by
- * jpeg_read_header(), so we do nothing here.
- */
-
- /* Step 5: Start decompressor */
-
- (void) jpeg_start_decompress(&cinfo);
- /* We can ignore the return value since suspension is not possible
- * with the stdio data source.
- */
-
- /* We may need to do some setup of our own at this point before reading
- * the data. After jpeg_start_decompress() we have the correct scaled
- * output image dimensions available, as well as the output colormap
- * if we asked for color quantization.
- * In this example, we need to make an output work buffer of the right size.
- */
- /* JSAMPLEs per row in output buffer */
- row_stride = cinfo.output_width * cinfo.output_components;
- /* Make a one-row-high sample array that will go away when done with image */
- buffer = (*cinfo.mem->alloc_sarray)
- ((j_common_ptr) &cinfo, JPOOL_IMAGE, row_stride, 1);
-
- /* Step 6: while (scan lines remain to be read) */
- /* jpeg_read_scanlines(...); */
-
- /* Here we use the library's state variable cinfo.output_scanline as the
- * loop counter, so that we don't have to keep track ourselves.
- */
- while (cinfo.output_scanline < cinfo.output_height) {
- /* jpeg_read_scanlines expects an array of pointers to scanlines.
- * Here the array is only one element long, but you could ask for
- * more than one scanline at a time if that's more convenient.
- */
- (void) jpeg_read_scanlines(&cinfo, buffer, 1);
- /* Assume put_scanline_someplace wants a pointer and sample count. */
- put_scanline_someplace(buffer[0], row_stride);
- }
-
- /* Step 7: Finish decompression */
-
- (void) jpeg_finish_decompress(&cinfo);
- /* We can ignore the return value since suspension is not possible
- * with the stdio data source.
- */
-
- /* Step 8: Release JPEG decompression object */
-
- /* This is an important step since it will release a good deal of memory. */
- jpeg_destroy_decompress(&cinfo);
-
- /* After finish_decompress, we can close the input file.
- * Here we postpone it until after no more JPEG errors are possible,
- * so as to simplify the setjmp error logic above. (Actually, I don't
- * think that jpeg_destroy can do an error exit, but why assume anything...)
- */
- fclose(infile);
-
- /* At this point you may want to check to see whether any corrupt-data
- * warnings occurred (test whether jerr.pub.num_warnings is nonzero).
- */
-
- /* And we're done! */
- return 1;
-}
-
-
-/*
- * SOME FINE POINTS:
- *
- * In the above code, we ignored the return value of jpeg_read_scanlines,
- * which is the number of scanlines actually read. We could get away with
- * this because we asked for only one line at a time and we weren't using
- * a suspending data source. See libjpeg.doc for more info.
- *
- * We cheated a bit by calling alloc_sarray() after jpeg_start_decompress();
- * we should have done it beforehand to ensure that the space would be
- * counted against the JPEG max_memory setting. In some systems the above
- * code would risk an out-of-memory error. However, in general we don't
- * know the output image dimensions before jpeg_start_decompress(), unless we
- * call jpeg_calc_output_dimensions(). See libjpeg.doc for more about this.
- *
- * Scanlines are returned in the same order as they appear in the JPEG file,
- * which is standardly top-to-bottom. If you must emit data bottom-to-top,
- * you can use one of the virtual arrays provided by the JPEG memory manager
- * to invert the data. See wrbmp.c for an example.
- *
- * As with compression, some operating modes may require temporary files.
- * On some systems you may need to set up a signal handler to ensure that
- * temporary files are deleted if the program is interrupted. See libjpeg.doc.
- */
diff --git a/libjpegtwrp/filelist.doc b/libjpegtwrp/filelist.doc
deleted file mode 100644
index e14982ca5..000000000
--- a/libjpegtwrp/filelist.doc
+++ /dev/null
@@ -1,210 +0,0 @@
-IJG JPEG LIBRARY: FILE LIST
-
-Copyright (C) 1994-1998, Thomas G. Lane.
-This file is part of the Independent JPEG Group's software.
-For conditions of distribution and use, see the accompanying README file.
-
-
-Here is a road map to the files in the IJG JPEG distribution. The
-distribution includes the JPEG library proper, plus two application
-programs ("cjpeg" and "djpeg") which use the library to convert JPEG
-files to and from some other popular image formats. A third application
-"jpegtran" uses the library to do lossless conversion between different
-variants of JPEG. There are also two stand-alone applications,
-"rdjpgcom" and "wrjpgcom".
-
-
-THE JPEG LIBRARY
-================
-
-Include files:
-
-jpeglib.h JPEG library's exported data and function declarations.
-jconfig.h Configuration declarations. Note: this file is not present
- in the distribution; it is generated during installation.
-jmorecfg.h Additional configuration declarations; need not be changed
- for a standard installation.
-jerror.h Declares JPEG library's error and trace message codes.
-jinclude.h Central include file used by all IJG .c files to reference
- system include files.
-jpegint.h JPEG library's internal data structures.
-jchuff.h Private declarations for Huffman encoder modules.
-jdhuff.h Private declarations for Huffman decoder modules.
-jdct.h Private declarations for forward & reverse DCT subsystems.
-jmemsys.h Private declarations for memory management subsystem.
-jversion.h Version information.
-
-Applications using the library should include jpeglib.h (which in turn
-includes jconfig.h and jmorecfg.h). Optionally, jerror.h may be included
-if the application needs to reference individual JPEG error codes. The
-other include files are intended for internal use and would not normally
-be included by an application program. (cjpeg/djpeg/etc do use jinclude.h,
-since its function is to improve portability of the whole IJG distribution.
-Most other applications will directly include the system include files they
-want, and hence won't need jinclude.h.)
-
-
-C source code files:
-
-These files contain most of the functions intended to be called directly by
-an application program:
-
-jcapimin.c Application program interface: core routines for compression.
-jcapistd.c Application program interface: standard compression.
-jdapimin.c Application program interface: core routines for decompression.
-jdapistd.c Application program interface: standard decompression.
-jcomapi.c Application program interface routines common to compression
- and decompression.
-jcparam.c Compression parameter setting helper routines.
-jctrans.c API and library routines for transcoding compression.
-jdtrans.c API and library routines for transcoding decompression.
-
-Compression side of the library:
-
-jcinit.c Initialization: determines which other modules to use.
-jcmaster.c Master control: setup and inter-pass sequencing logic.
-jcmainct.c Main buffer controller (preprocessor => JPEG compressor).
-jcprepct.c Preprocessor buffer controller.
-jccoefct.c Buffer controller for DCT coefficient buffer.
-jccolor.c Color space conversion.
-jcsample.c Downsampling.
-jcdctmgr.c DCT manager (DCT implementation selection & control).
-jfdctint.c Forward DCT using slow-but-accurate integer method.
-jfdctfst.c Forward DCT using faster, less accurate integer method.
-jfdctflt.c Forward DCT using floating-point arithmetic.
-jchuff.c Huffman entropy coding for sequential JPEG.
-jcphuff.c Huffman entropy coding for progressive JPEG.
-jcmarker.c JPEG marker writing.
-jdatadst.c Data destination manager for stdio output.
-
-Decompression side of the library:
-
-jdmaster.c Master control: determines which other modules to use.
-jdinput.c Input controller: controls input processing modules.
-jdmainct.c Main buffer controller (JPEG decompressor => postprocessor).
-jdcoefct.c Buffer controller for DCT coefficient buffer.
-jdpostct.c Postprocessor buffer controller.
-jdmarker.c JPEG marker reading.
-jdhuff.c Huffman entropy decoding for sequential JPEG.
-jdphuff.c Huffman entropy decoding for progressive JPEG.
-jddctmgr.c IDCT manager (IDCT implementation selection & control).
-jidctint.c Inverse DCT using slow-but-accurate integer method.
-jidctfst.c Inverse DCT using faster, less accurate integer method.
-jidctflt.c Inverse DCT using floating-point arithmetic.
-jidctred.c Inverse DCTs with reduced-size outputs.
-jdsample.c Upsampling.
-jdcolor.c Color space conversion.
-jdmerge.c Merged upsampling/color conversion (faster, lower quality).
-jquant1.c One-pass color quantization using a fixed-spacing colormap.
-jquant2.c Two-pass color quantization using a custom-generated colormap.
- Also handles one-pass quantization to an externally given map.
-jdatasrc.c Data source manager for stdio input.
-
-Support files for both compression and decompression:
-
-jerror.c Standard error handling routines (application replaceable).
-jmemmgr.c System-independent (more or less) memory management code.
-jutils.c Miscellaneous utility routines.
-
-jmemmgr.c relies on a system-dependent memory management module. The IJG
-distribution includes the following implementations of the system-dependent
-module:
-
-jmemnobs.c "No backing store": assumes adequate virtual memory exists.
-jmemansi.c Makes temporary files with ANSI-standard routine tmpfile().
-jmemname.c Makes temporary files with program-generated file names.
-jmemdos.c Custom implementation for MS-DOS (16-bit environment only):
- can use extended and expanded memory as well as temp files.
-jmemmac.c Custom implementation for Apple Macintosh.
-
-Exactly one of the system-dependent modules should be configured into an
-installed JPEG library (see install.doc for hints about which one to use).
-On unusual systems you may find it worthwhile to make a special
-system-dependent memory manager.
-
-
-Non-C source code files:
-
-jmemdosa.asm 80x86 assembly code support for jmemdos.c; used only in
- MS-DOS-specific configurations of the JPEG library.
-
-
-CJPEG/DJPEG/JPEGTRAN
-====================
-
-Include files:
-
-cdjpeg.h Declarations shared by cjpeg/djpeg/jpegtran modules.
-cderror.h Additional error and trace message codes for cjpeg et al.
-transupp.h Declarations for jpegtran support routines in transupp.c.
-
-C source code files:
-
-cjpeg.c Main program for cjpeg.
-djpeg.c Main program for djpeg.
-jpegtran.c Main program for jpegtran.
-cdjpeg.c Utility routines used by all three programs.
-rdcolmap.c Code to read a colormap file for djpeg's "-map" switch.
-rdswitch.c Code to process some of cjpeg's more complex switches.
- Also used by jpegtran.
-transupp.c Support code for jpegtran: lossless image manipulations.
-
-Image file reader modules for cjpeg:
-
-rdbmp.c BMP file input.
-rdgif.c GIF file input (now just a stub).
-rdppm.c PPM/PGM file input.
-rdrle.c Utah RLE file input.
-rdtarga.c Targa file input.
-
-Image file writer modules for djpeg:
-
-wrbmp.c BMP file output.
-wrgif.c GIF file output (a mere shadow of its former self).
-wrppm.c PPM/PGM file output.
-wrrle.c Utah RLE file output.
-wrtarga.c Targa file output.
-
-
-RDJPGCOM/WRJPGCOM
-=================
-
-C source code files:
-
-rdjpgcom.c Stand-alone rdjpgcom application.
-wrjpgcom.c Stand-alone wrjpgcom application.
-
-These programs do not depend on the IJG library. They do use
-jconfig.h and jinclude.h, only to improve portability.
-
-
-ADDITIONAL FILES
-================
-
-Documentation (see README for a guide to the documentation files):
-
-README Master documentation file.
-*.doc Other documentation files.
-*.1 Documentation in Unix man page format.
-change.log Version-to-version change highlights.
-example.c Sample code for calling JPEG library.
-
-Configuration/installation files and programs (see install.doc for more info):
-
-configure Unix shell script to perform automatic configuration.
-ltconfig Support scripts for configure (from GNU libtool).
-ltmain.sh
-config.guess
-config.sub
-install-sh Install shell script for those Unix systems lacking one.
-ckconfig.c Program to generate jconfig.h on non-Unix systems.
-jconfig.doc Template for making jconfig.h by hand.
-makefile.* Sample makefiles for particular systems.
-jconfig.* Sample jconfig.h for particular systems.
-ansi2knr.c De-ANSIfier for pre-ANSI C compilers (courtesy of
- L. Peter Deutsch and Aladdin Enterprises).
-
-Test files (see install.doc for test procedure):
-
-test*.* Source and comparison files for confidence test.
- These are binary image files, NOT text files.
diff --git a/libjpegtwrp/install-sh b/libjpegtwrp/install-sh
deleted file mode 100755
index e8436696c..000000000
--- a/libjpegtwrp/install-sh
+++ /dev/null
@@ -1,250 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission. M.I.T. makes no representations about the
-# suitability of this software for any purpose. It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd="$cpprog"
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd="$stripprog"
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
-done
-
-if [ x"$src" = x ]
-then
- echo "install: no input file specified"
- exit 1
-else
- true
-fi
-
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d $dst ]; then
- instcmd=:
- else
- instcmd=mkdir
- fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
- if [ -f $src -o -d $src ]
- then
- true
- else
- echo "install: $src does not exist"
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "install: no destination specified"
- exit 1
- else
- true
- fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
- if [ -d $dst ]
- then
- dst="$dst"/`basename $src`
- else
- true
- fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
- shift
-
- if [ ! -d "${pathcomp}" ] ;
- then
- $mkdirprog "${pathcomp}"
- else
- true
- fi
-
- pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd $dst &&
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename $dst`
- else
- dstfile=`basename $dst $transformbasename |
- sed $transformarg`$transformbasename
- fi
-
-# don't allow the sed command to completely eliminate the filename
-
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename $dst`
- else
- true
- fi
-
-# Make a temp file name in the proper directory.
-
- dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
- $doit $instcmd $src $dsttmp &&
-
- trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
- $doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
-
-fi &&
-
-
-exit 0
diff --git a/libjpegtwrp/install.doc b/libjpegtwrp/install.doc
deleted file mode 100644
index 3702b986b..000000000
--- a/libjpegtwrp/install.doc
+++ /dev/null
@@ -1,1063 +0,0 @@
-INSTALLATION INSTRUCTIONS for the Independent JPEG Group's JPEG software
-
-Copyright (C) 1991-1998, Thomas G. Lane.
-This file is part of the Independent JPEG Group's software.
-For conditions of distribution and use, see the accompanying README file.
-
-
-This file explains how to configure and install the IJG software. We have
-tried to make this software extremely portable and flexible, so that it can be
-adapted to almost any environment. The downside of this decision is that the
-installation process is complicated. We have provided shortcuts to simplify
-the task on common systems. But in any case, you will need at least a little
-familiarity with C programming and program build procedures for your system.
-
-If you are only using this software as part of a larger program, the larger
-program's installation procedure may take care of configuring the IJG code.
-For example, Ghostscript's installation script will configure the IJG code.
-You don't need to read this file if you just want to compile Ghostscript.
-
-If you are on a Unix machine, you may not need to read this file at all.
-Try doing
- ./configure
- make
- make test
-If that doesn't complain, do
- make install
-(better do "make -n install" first to see if the makefile will put the files
-where you want them). Read further if you run into snags or want to customize
-the code for your system.
-
-
-TABLE OF CONTENTS
------------------
-
-Before you start
-Configuring the software:
- using the automatic "configure" script
- using one of the supplied jconfig and makefile files
- by hand
-Building the software
-Testing the software
-Installing the software
-Optional stuff
-Optimization
-Hints for specific systems
-
-
-BEFORE YOU START
-================
-
-Before installing the software you must unpack the distributed source code.
-Since you are reading this file, you have probably already succeeded in this
-task. However, there is a potential for error if you needed to convert the
-files to the local standard text file format (for example, if you are on
-MS-DOS you may have converted LF end-of-line to CR/LF). You must apply
-such conversion to all the files EXCEPT those whose names begin with "test".
-The test files contain binary data; if you change them in any way then the
-self-test will give bad results.
-
-Please check the last section of this file to see if there are hints for the
-specific machine or compiler you are using.
-
-
-CONFIGURING THE SOFTWARE
-========================
-
-To configure the IJG code for your system, you need to create two files:
- * jconfig.h: contains values for system-dependent #define symbols.
- * Makefile: controls the compilation process.
-(On a non-Unix machine, you may create "project files" or some other
-substitute for a Makefile. jconfig.h is needed in any environment.)
-
-We provide three different ways to generate these files:
- * On a Unix system, you can just run the "configure" script.
- * We provide sample jconfig files and makefiles for popular machines;
- if your machine matches one of the samples, just copy the right sample
- files to jconfig.h and Makefile.
- * If all else fails, read the instructions below and make your own files.
-
-
-Configuring the software using the automatic "configure" script
----------------------------------------------------------------
-
-If you are on a Unix machine, you can just type
- ./configure
-and let the configure script construct appropriate configuration files.
-If you're using "csh" on an old version of System V, you might need to type
- sh configure
-instead to prevent csh from trying to execute configure itself.
-Expect configure to run for a few minutes, particularly on slower machines;
-it works by compiling a series of test programs.
-
-Configure was created with GNU Autoconf and it follows the usual conventions
-for GNU configure scripts. It makes a few assumptions that you may want to
-override. You can do this by providing optional switches to configure:
-
-* If you want to build libjpeg as a shared library, say
- ./configure --enable-shared
-To get both shared and static libraries, say
- ./configure --enable-shared --enable-static
-Note that these switches invoke GNU libtool to take care of system-dependent
-shared library building methods. If things don't work this way, please try
-running configure without either switch; that should build a static library
-without using libtool. If that works, your problem is probably with libtool
-not with the IJG code. libtool is fairly new and doesn't support all flavors
-of Unix yet. (You might be able to find a newer version of libtool than the
-one included with libjpeg; see ftp.gnu.org. Report libtool problems to
-bug-libtool@gnu.org.)
-
-* Configure will use gcc (GNU C compiler) if it's available, otherwise cc.
-To force a particular compiler to be selected, use the CC option, for example
- ./configure CC='cc'
-The same method can be used to include any unusual compiler switches.
-For example, on HP-UX you probably want to say
- ./configure CC='cc -Aa'
-to get HP's compiler to run in ANSI mode.
-
-* The default CFLAGS setting is "-O" for non-gcc compilers, "-O2" for gcc.
-You can override this by saying, for example,
- ./configure CFLAGS='-g'
-if you want to compile with debugging support.
-
-* Configure will set up the makefile so that "make install" will install files
-into /usr/local/bin, /usr/local/man, etc. You can specify an installation
-prefix other than "/usr/local" by giving configure the option "--prefix=PATH".
-
-* If you don't have a lot of swap space, you may need to enable the IJG
-software's internal virtual memory mechanism. To do this, give the option
-"--enable-maxmem=N" where N is the default maxmemory limit in megabytes.
-This is discussed in more detail under "Selecting a memory manager", below.
-You probably don't need to worry about this on reasonably-sized Unix machines,
-unless you plan to process very large images.
-
-Configure has some other features that are useful if you are cross-compiling
-or working in a network of multiple machine types; but if you need those
-features, you probably already know how to use them.
-
-
-Configuring the software using one of the supplied jconfig and makefile files
------------------------------------------------------------------------------
-
-If you have one of these systems, you can just use the provided configuration
-files:
-
-Makefile jconfig file System and/or compiler
-
-makefile.manx jconfig.manx Amiga, Manx Aztec C
-makefile.sas jconfig.sas Amiga, SAS C
-makeproj.mac jconfig.mac Apple Macintosh, Metrowerks CodeWarrior
-mak*jpeg.st jconfig.st Atari ST/STE/TT, Pure C or Turbo C
-makefile.bcc jconfig.bcc MS-DOS or OS/2, Borland C
-makefile.dj jconfig.dj MS-DOS, DJGPP (Delorie's port of GNU C)
-makefile.mc6 jconfig.mc6 MS-DOS, Microsoft C (16-bit only)
-makefile.wat jconfig.wat MS-DOS, OS/2, or Windows NT, Watcom C
-makefile.vc jconfig.vc Windows NT/95, MS Visual C++
-make*.ds jconfig.vc Windows NT/95, MS Developer Studio
-makefile.mms jconfig.vms Digital VMS, with MMS software
-makefile.vms jconfig.vms Digital VMS, without MMS software
-
-Copy the proper jconfig file to jconfig.h and the makefile to Makefile (or
-whatever your system uses as the standard makefile name). For more info see
-the appropriate system-specific hints section near the end of this file.
-
-
-Configuring the software by hand
---------------------------------
-
-First, generate a jconfig.h file. If you are moderately familiar with C,
-the comments in jconfig.doc should be enough information to do this; just
-copy jconfig.doc to jconfig.h and edit it appropriately. Otherwise, you may
-prefer to use the ckconfig.c program. You will need to compile and execute
-ckconfig.c by hand --- we hope you know at least enough to do that.
-ckconfig.c may not compile the first try (in fact, the whole idea is for it
-to fail if anything is going to). If you get compile errors, fix them by
-editing ckconfig.c according to the directions given in ckconfig.c. Once
-you get it to run, it will write a suitable jconfig.h file, and will also
-print out some advice about which makefile to use.
-
-You may also want to look at the canned jconfig files, if there is one for a
-system similar to yours.
-
-Second, select a makefile and copy it to Makefile (or whatever your system
-uses as the standard makefile name). The most generic makefiles we provide
-are
- makefile.ansi: if your C compiler supports function prototypes
- makefile.unix: if not.
-(You have function prototypes if ckconfig.c put "#define HAVE_PROTOTYPES"
-in jconfig.h.) You may want to start from one of the other makefiles if
-there is one for a system similar to yours.
-
-Look over the selected Makefile and adjust options as needed. In particular
-you may want to change the CC and CFLAGS definitions. For instance, if you
-are using GCC, set CC=gcc. If you had to use any compiler switches to get
-ckconfig.c to work, make sure the same switches are in CFLAGS.
-
-If you are on a system that doesn't use makefiles, you'll need to set up
-project files (or whatever you do use) to compile all the source files and
-link them into executable files cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom.
-See the file lists in any of the makefiles to find out which files go into
-each program. Note that the provided makefiles all make a "library" file
-libjpeg first, but you don't have to do that if you don't want to; the file
-lists identify which source files are actually needed for compression,
-decompression, or both. As a last resort, you can make a batch script that
-just compiles everything and links it all together; makefile.vms is an example
-of this (it's for VMS systems that have no make-like utility).
-
-Here are comments about some specific configuration decisions you'll
-need to make:
-
-Command line style
-------------------
-
-These programs can use a Unix-like command line style which supports
-redirection and piping, like this:
- cjpeg inputfile >outputfile
- cjpeg <inputfile >outputfile
- source program | cjpeg >outputfile
-The simpler "two file" command line style is just
- cjpeg inputfile outputfile
-You may prefer the two-file style, particularly if you don't have pipes.
-
-You MUST use two-file style on any system that doesn't cope well with binary
-data fed through stdin/stdout; this is true for some MS-DOS compilers, for
-example. If you're not on a Unix system, it's safest to assume you need
-two-file style. (But if your compiler provides either the Posix-standard
-fdopen() library routine or a Microsoft-compatible setmode() routine, you
-can safely use the Unix command line style, by defining USE_FDOPEN or
-USE_SETMODE respectively.)
-
-To use the two-file style, make jconfig.h say "#define TWO_FILE_COMMANDLINE".
-
-Selecting a memory manager
---------------------------
-
-The IJG code is capable of working on images that are too big to fit in main
-memory; data is swapped out to temporary files as necessary. However, the
-code to do this is rather system-dependent. We provide five different
-memory managers:
-
-* jmemansi.c This version uses the ANSI-standard library routine tmpfile(),
- which not all non-ANSI systems have. On some systems
- tmpfile() may put the temporary file in a non-optimal
- location; if you don't like what it does, use jmemname.c.
-
-* jmemname.c This version creates named temporary files. For anything
- except a Unix machine, you'll need to configure the
- select_file_name() routine appropriately; see the comments
- near the head of jmemname.c. If you use this version, define
- NEED_SIGNAL_CATCHER in jconfig.h to make sure the temp files
- are removed if the program is aborted.
-
-* jmemnobs.c (That stands for No Backing Store :-).) This will compile on
- almost any system, but it assumes you have enough main memory
- or virtual memory to hold the biggest images you work with.
-
-* jmemdos.c This should be used with most 16-bit MS-DOS compilers.
- See the system-specific notes about MS-DOS for more info.
- IMPORTANT: if you use this, define USE_MSDOS_MEMMGR in
- jconfig.h, and include the assembly file jmemdosa.asm in the
- programs. The supplied makefiles and jconfig files for
- 16-bit MS-DOS compilers already do both.
-
-* jmemmac.c Custom version for Apple Macintosh; see the system-specific
- notes for Macintosh for more info.
-
-To use a particular memory manager, change the SYSDEPMEM variable in your
-makefile to equal the corresponding object file name (for example, jmemansi.o
-or jmemansi.obj for jmemansi.c).
-
-If you have plenty of (real or virtual) main memory, just use jmemnobs.c.
-"Plenty" means about ten bytes for every pixel in the largest images
-you plan to process, so a lot of systems don't meet this criterion.
-If yours doesn't, try jmemansi.c first. If that doesn't compile, you'll have
-to use jmemname.c; be sure to adjust select_file_name() for local conditions.
-You may also need to change unlink() to remove() in close_backing_store().
-
-Except with jmemnobs.c or jmemmac.c, you need to adjust the DEFAULT_MAX_MEM
-setting to a reasonable value for your system (either by adding a #define for
-DEFAULT_MAX_MEM to jconfig.h, or by adding a -D switch to the Makefile).
-This value limits the amount of data space the program will attempt to
-allocate. Code and static data space isn't counted, so the actual memory
-needs for cjpeg or djpeg are typically 100 to 150Kb more than the max-memory
-setting. Larger max-memory settings reduce the amount of I/O needed to
-process a large image, but too large a value can result in "insufficient
-memory" failures. On most Unix machines (and other systems with virtual
-memory), just set DEFAULT_MAX_MEM to several million and forget it. At the
-other end of the spectrum, for MS-DOS machines you probably can't go much
-above 300K to 400K. (On MS-DOS the value refers to conventional memory only.
-Extended/expanded memory is handled separately by jmemdos.c.)
-
-
-BUILDING THE SOFTWARE
-=====================
-
-Now you should be able to compile the software. Just say "make" (or
-whatever's necessary to start the compilation). Have a cup of coffee.
-
-Here are some things that could go wrong:
-
-If your compiler complains about undefined structures, you should be able to
-shut it up by putting "#define INCOMPLETE_TYPES_BROKEN" in jconfig.h.
-
-If you have trouble with missing system include files or inclusion of the
-wrong ones, read jinclude.h. This shouldn't happen if you used configure
-or ckconfig.c to set up jconfig.h.
-
-There are a fair number of routines that do not use all of their parameters;
-some compilers will issue warnings about this, which you can ignore. There
-are also a few configuration checks that may give "unreachable code" warnings.
-Any other warning deserves investigation.
-
-If you don't have a getenv() library routine, define NO_GETENV.
-
-Also see the system-specific hints, below.
-
-
-TESTING THE SOFTWARE
-====================
-
-As a quick test of functionality we've included a small sample image in
-several forms:
- testorig.jpg Starting point for the djpeg tests.
- testimg.ppm The output of djpeg testorig.jpg
- testimg.bmp The output of djpeg -bmp -colors 256 testorig.jpg
- testimg.jpg The output of cjpeg testimg.ppm
- testprog.jpg Progressive-mode equivalent of testorig.jpg.
- testimgp.jpg The output of cjpeg -progressive -optimize testimg.ppm
-(The first- and second-generation .jpg files aren't identical since JPEG is
-lossy.) If you can generate duplicates of the testimg* files then you
-probably have working programs.
-
-With most of the makefiles, "make test" will perform the necessary
-comparisons.
-
-If you're using a makefile that doesn't provide the test option, run djpeg
-and cjpeg by hand and compare the output files to testimg* with whatever
-binary file comparison tool you have. The files should be bit-for-bit
-identical.
-
-If the programs complain "MAX_ALLOC_CHUNK is wrong, please fix", then you
-need to reduce MAX_ALLOC_CHUNK to a value that fits in type size_t.
-Try adding "#define MAX_ALLOC_CHUNK 65520L" to jconfig.h. A less likely
-configuration error is "ALIGN_TYPE is wrong, please fix": defining ALIGN_TYPE
-as long should take care of that one.
-
-If the cjpeg test run fails with "Missing Huffman code table entry", it's a
-good bet that you needed to define RIGHT_SHIFT_IS_UNSIGNED. Go back to the
-configuration step and run ckconfig.c. (This is a good plan for any other
-test failure, too.)
-
-If you are using Unix (one-file) command line style on a non-Unix system,
-it's a good idea to check that binary I/O through stdin/stdout actually
-works. You should get the same results from "djpeg <testorig.jpg >out.ppm"
-as from "djpeg -outfile out.ppm testorig.jpg". Note that the makefiles all
-use the latter style and therefore do not exercise stdin/stdout! If this
-check fails, try recompiling with USE_SETMODE or USE_FDOPEN defined.
-If it still doesn't work, better use two-file style.
-
-If you chose a memory manager other than jmemnobs.c, you should test that
-temporary-file usage works. Try "djpeg -bmp -colors 256 -max 0 testorig.jpg"
-and make sure its output matches testimg.bmp. If you have any really large
-images handy, try compressing them with -optimize and/or decompressing with
--colors 256 to make sure your DEFAULT_MAX_MEM setting is not too large.
-
-NOTE: this is far from an exhaustive test of the JPEG software; some modules,
-such as 1-pass color quantization, are not exercised at all. It's just a
-quick test to give you some confidence that you haven't missed something
-major.
-
-
-INSTALLING THE SOFTWARE
-=======================
-
-Once you're done with the above steps, you can install the software by
-copying the executable files (cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom)
-to wherever you normally install programs. On Unix systems, you'll also want
-to put the man pages (cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1)
-in the man-page directory. The pre-fab makefiles don't support this step
-since there's such a wide variety of installation procedures on different
-systems.
-
-If you generated a Makefile with the "configure" script, you can just say
- make install
-to install the programs and their man pages into the standard places.
-(You'll probably need to be root to do this.) We recommend first saying
- make -n install
-to see where configure thought the files should go. You may need to edit
-the Makefile, particularly if your system's conventions for man page
-filenames don't match what configure expects.
-
-If you want to install the IJG library itself, for use in compiling other
-programs besides ours, then you need to put the four include files
- jpeglib.h jerror.h jconfig.h jmorecfg.h
-into your include-file directory, and put the library file libjpeg.a
-(extension may vary depending on system) wherever library files go.
-If you generated a Makefile with "configure", it will do what it thinks
-is the right thing if you say
- make install-lib
-
-
-OPTIONAL STUFF
-==============
-
-Progress monitor:
-
-If you like, you can #define PROGRESS_REPORT (in jconfig.h) to enable display
-of percent-done progress reports. The routine provided in cdjpeg.c merely
-prints percentages to stderr, but you can customize it to do something
-fancier.
-
-Utah RLE file format support:
-
-We distribute the software with support for RLE image files (Utah Raster
-Toolkit format) disabled, because the RLE support won't compile without the
-Utah library. If you have URT version 3.1 or later, you can enable RLE
-support as follows:
- 1. #define RLE_SUPPORTED in jconfig.h.
- 2. Add a -I option to CFLAGS in the Makefile for the directory
- containing the URT .h files (typically the "include"
- subdirectory of the URT distribution).
- 3. Add -L... -lrle to LDLIBS in the Makefile, where ... specifies
- the directory containing the URT "librle.a" file (typically the
- "lib" subdirectory of the URT distribution).
-
-Support for 12-bit-deep pixel data:
-
-The JPEG standard allows either 8-bit or 12-bit data precision. (For color,
-this means 8 or 12 bits per channel, of course.) If you need to work with
-deeper than 8-bit data, you can compile the IJG code for 12-bit operation.
-To do so:
- 1. In jmorecfg.h, define BITS_IN_JSAMPLE as 12 rather than 8.
- 2. In jconfig.h, undefine BMP_SUPPORTED, RLE_SUPPORTED, and TARGA_SUPPORTED,
- because the code for those formats doesn't handle 12-bit data and won't
- even compile. (The PPM code does work, as explained below. The GIF
- code works too; it scales 8-bit GIF data to and from 12-bit depth
- automatically.)
- 3. Compile. Don't expect "make test" to pass, since the supplied test
- files are for 8-bit data.
-
-Currently, 12-bit support does not work on 16-bit-int machines.
-
-Note that a 12-bit version will not read 8-bit JPEG files, nor vice versa;
-so you'll want to keep around a regular 8-bit compilation as well.
-(Run-time selection of data depth, to allow a single copy that does both,
-is possible but would probably slow things down considerably; it's very low
-on our to-do list.)
-
-The PPM reader (rdppm.c) can read 12-bit data from either text-format or
-binary-format PPM and PGM files. Binary-format PPM/PGM files which have a
-maxval greater than 255 are assumed to use 2 bytes per sample, LSB first
-(little-endian order). As of early 1995, 2-byte binary format is not
-officially supported by the PBMPLUS library, but it is expected that a
-future release of PBMPLUS will support it. Note that the PPM reader will
-read files of any maxval regardless of the BITS_IN_JSAMPLE setting; incoming
-data is automatically rescaled to either maxval=255 or maxval=4095 as
-appropriate for the cjpeg bit depth.
-
-The PPM writer (wrppm.c) will normally write 2-byte binary PPM or PGM
-format, maxval 4095, when compiled with BITS_IN_JSAMPLE=12. Since this
-format is not yet widely supported, you can disable it by compiling wrppm.c
-with PPM_NORAWWORD defined; then the data is scaled down to 8 bits to make a
-standard 1-byte/sample PPM or PGM file. (Yes, this means still another copy
-of djpeg to keep around. But hopefully you won't need it for very long.
-Poskanzer's supposed to get that new PBMPLUS release out Real Soon Now.)
-
-Of course, if you are working with 12-bit data, you probably have it stored
-in some other, nonstandard format. In that case you'll probably want to
-write your own I/O modules to read and write your format.
-
-Note that a 12-bit version of cjpeg always runs in "-optimize" mode, in
-order to generate valid Huffman tables. This is necessary because our
-default Huffman tables only cover 8-bit data.
-
-Removing code:
-
-If you need to make a smaller version of the JPEG software, some optional
-functions can be removed at compile time. See the xxx_SUPPORTED #defines in
-jconfig.h and jmorecfg.h. If at all possible, we recommend that you leave in
-decoder support for all valid JPEG files, to ensure that you can read anyone's
-output. Taking out support for image file formats that you don't use is the
-most painless way to make the programs smaller. Another possibility is to
-remove some of the DCT methods: in particular, the "IFAST" method may not be
-enough faster than the others to be worth keeping on your machine. (If you
-do remove ISLOW or IFAST, be sure to redefine JDCT_DEFAULT or JDCT_FASTEST
-to a supported method, by adding a #define in jconfig.h.)
-
-
-OPTIMIZATION
-============
-
-Unless you own a Cray, you'll probably be interested in making the JPEG
-software go as fast as possible. This section covers some machine-dependent
-optimizations you may want to try. We suggest that before trying any of
-this, you first get the basic installation to pass the self-test step.
-Repeat the self-test after any optimization to make sure that you haven't
-broken anything.
-
-The integer DCT routines perform a lot of multiplications. These
-multiplications must yield 32-bit results, but none of their input values
-are more than 16 bits wide. On many machines, notably the 680x0 and 80x86
-CPUs, a 16x16=>32 bit multiply instruction is faster than a full 32x32=>32
-bit multiply. Unfortunately there is no portable way to specify such a
-multiplication in C, but some compilers can generate one when you use the
-right combination of casts. See the MULTIPLYxxx macro definitions in
-jdct.h. If your compiler makes "int" be 32 bits and "short" be 16 bits,
-defining SHORTxSHORT_32 is fairly likely to work. When experimenting with
-alternate definitions, be sure to test not only whether the code still works
-(use the self-test), but also whether it is actually faster --- on some
-compilers, alternate definitions may compute the right answer, yet be slower
-than the default. Timing cjpeg on a large PGM (grayscale) input file is the
-best way to check this, as the DCT will be the largest fraction of the runtime
-in that mode. (Note: some of the distributed compiler-specific jconfig files
-already contain #define switches to select appropriate MULTIPLYxxx
-definitions.)
-
-If your machine has sufficiently fast floating point hardware, you may find
-that the float DCT method is faster than the integer DCT methods, even
-after tweaking the integer multiply macros. In that case you may want to
-make the float DCT be the default method. (The only objection to this is
-that float DCT results may vary slightly across machines.) To do that, add
-"#define JDCT_DEFAULT JDCT_FLOAT" to jconfig.h. Even if you don't change
-the default, you should redefine JDCT_FASTEST, which is the method selected
-by djpeg's -fast switch. Don't forget to update the documentation files
-(usage.doc and/or cjpeg.1, djpeg.1) to agree with what you've done.
-
-If access to "short" arrays is slow on your machine, it may be a win to
-define type JCOEF as int rather than short. This will cost a good deal of
-memory though, particularly in some multi-pass modes, so don't do it unless
-you have memory to burn and short is REALLY slow.
-
-If your compiler can compile function calls in-line, make sure the INLINE
-macro in jmorecfg.h is defined as the keyword that marks a function
-inline-able. Some compilers have a switch that tells the compiler to inline
-any function it thinks is profitable (e.g., -finline-functions for gcc).
-Enabling such a switch is likely to make the compiled code bigger but faster.
-
-In general, it's worth trying the maximum optimization level of your compiler,
-and experimenting with any optional optimizations such as loop unrolling.
-(Unfortunately, far too many compilers have optimizer bugs ... be prepared to
-back off if the code fails self-test.) If you do any experimentation along
-these lines, please report the optimal settings to jpeg-info@uunet.uu.net so
-we can mention them in future releases. Be sure to specify your machine and
-compiler version.
-
-
-HINTS FOR SPECIFIC SYSTEMS
-==========================
-
-We welcome reports on changes needed for systems not mentioned here. Submit
-'em to jpeg-info@uunet.uu.net. Also, if configure or ckconfig.c is wrong
-about how to configure the JPEG software for your system, please let us know.
-
-
-Acorn RISC OS:
-
-(Thanks to Simon Middleton for these hints on compiling with Desktop C.)
-After renaming the files according to Acorn conventions, take a copy of
-makefile.ansi, change all occurrences of 'libjpeg.a' to 'libjpeg.o' and
-change these definitions as indicated:
-
-CFLAGS= -throwback -IC: -Wn
-LDLIBS=C:o.Stubs
-SYSDEPMEM=jmemansi.o
-LN=Link
-AR=LibFile -c -o
-
-Also add a new line '.c.o:; $(cc) $< $(cflags) -c -o $@'. Remove the
-lines '$(RM) libjpeg.o' and '$(AR2) libjpeg.o' and the 'jconfig.h'
-dependency section.
-
-Copy jconfig.doc to jconfig.h. Edit jconfig.h to define TWO_FILE_COMMANDLINE
-and CHAR_IS_UNSIGNED.
-
-Run the makefile using !AMU not !Make. If you want to use the 'clean' and
-'test' makefile entries then you will have to fiddle with the syntax a bit
-and rename the test files.
-
-
-Amiga:
-
-SAS C 6.50 reportedly is too buggy to compile the IJG code properly.
-A patch to update to 6.51 is available from SAS or AmiNet FTP sites.
-
-The supplied config files are set up to use jmemname.c as the memory
-manager, with temporary files being created on the device named by
-"JPEGTMP:".
-
-
-Atari ST/STE/TT:
-
-Copy the project files makcjpeg.st, makdjpeg.st, maktjpeg.st, and makljpeg.st
-to cjpeg.prj, djpeg.prj, jpegtran.prj, and libjpeg.prj respectively. The
-project files should work as-is with Pure C. For Turbo C, change library
-filenames "pc..." to "tc..." in each project file. Note that libjpeg.prj
-selects jmemansi.c as the recommended memory manager. You'll probably want to
-adjust the DEFAULT_MAX_MEM setting --- you want it to be a couple hundred K
-less than your normal free memory. Put "#define DEFAULT_MAX_MEM nnnn" into
-jconfig.h to do this.
-
-To use the 68881/68882 coprocessor for the floating point DCT, add the
-compiler option "-8" to the project files and replace pcfltlib.lib with
-pc881lib.lib in cjpeg.prj and djpeg.prj. Or if you don't have a
-coprocessor, you may prefer to remove the float DCT code by undefining
-DCT_FLOAT_SUPPORTED in jmorecfg.h (since without a coprocessor, the float
-code will be too slow to be useful). In that case, you can delete
-pcfltlib.lib from the project files.
-
-Note that you must make libjpeg.lib before making cjpeg.ttp, djpeg.ttp,
-or jpegtran.ttp. You'll have to perform the self-test by hand.
-
-We haven't bothered to include project files for rdjpgcom and wrjpgcom.
-Those source files should just be compiled by themselves; they don't
-depend on the JPEG library.
-
-There is a bug in some older versions of the Turbo C library which causes the
-space used by temporary files created with "tmpfile()" not to be freed after
-an abnormal program exit. If you check your disk afterwards, you will find
-cluster chains that are allocated but not used by a file. This should not
-happen in cjpeg/djpeg/jpegtran, since we enable a signal catcher to explicitly
-close temp files before exiting. But if you use the JPEG library with your
-own code, be sure to supply a signal catcher, or else use a different
-system-dependent memory manager.
-
-
-Cray:
-
-Should you be so fortunate as to be running JPEG on a Cray YMP, there is a
-compiler bug in old versions of Cray's Standard C (prior to 3.1). If you
-still have an old compiler, you'll need to insert a line reading
-"#pragma novector" just before the loop
- for (i = 1; i <= (int) htbl->bits[l]; i++)
- huffsize[p++] = (char) l;
-in fix_huff_tbl (in V5beta1, line 204 of jchuff.c and line 176 of jdhuff.c).
-[This bug may or may not still occur with the current IJG code, but it's
-probably a dead issue anyway...]
-
-
-HP-UX:
-
-If you have HP-UX 7.05 or later with the "software development" C compiler,
-you should run the compiler in ANSI mode. If using the configure script,
-say
- ./configure CC='cc -Aa'
-(or -Ae if you prefer). If configuring by hand, use makefile.ansi and add
-"-Aa" to the CFLAGS line in the makefile.
-
-If you have a pre-7.05 system, or if you are using the non-ANSI C compiler
-delivered with a minimum HP-UX system, then you must use makefile.unix
-(and do NOT add -Aa); or just run configure without the CC option.
-
-On HP 9000 series 800 machines, the HP C compiler is buggy in revisions prior
-to A.08.07. If you get complaints about "not a typedef name", you'll have to
-use makefile.unix, or run configure without the CC option.
-
-
-Macintosh, generic comments:
-
-The supplied user-interface files (cjpeg.c, djpeg.c, etc) are set up to
-provide a Unix-style command line interface. You can use this interface on
-the Mac by means of the ccommand() library routine provided by Metrowerks
-CodeWarrior or Think C. This is only appropriate for testing the library,
-however; to make a user-friendly equivalent of cjpeg/djpeg you'd really want
-to develop a Mac-style user interface. There isn't a complete example
-available at the moment, but there are some helpful starting points:
-1. Sam Bushell's free "To JPEG" applet provides drag-and-drop conversion to
-JPEG under System 7 and later. This only illustrates how to use the
-compression half of the library, but it does a very nice job of that part.
-The CodeWarrior source code is available from http://www.pobox.com/~jsam.
-2. Jim Brunner prepared a Mac-style user interface for both compression and
-decompression. Unfortunately, it hasn't been updated since IJG v4, and
-the library's API has changed considerably since then. Still it may be of
-some help, particularly as a guide to compiling the IJG code under Think C.
-Jim's code is available from the Info-Mac archives, at sumex-aim.stanford.edu
-or mirrors thereof; see file /info-mac/dev/src/jpeg-convert-c.hqx.
-
-jmemmac.c is the recommended memory manager back end for Macintosh. It uses
-NewPtr/DisposePtr instead of malloc/free, and has a Mac-specific
-implementation of jpeg_mem_available(). It also creates temporary files that
-follow Mac conventions. (That part of the code relies on System-7-or-later OS
-functions. See the comments in jmemmac.c if you need to run it on System 6.)
-NOTE that USE_MAC_MEMMGR must be defined in jconfig.h to use jmemmac.c.
-
-You can also use jmemnobs.c, if you don't care about handling images larger
-than available memory. If you use any memory manager back end other than
-jmemmac.c, we recommend replacing "malloc" and "free" by "NewPtr" and
-"DisposePtr", because Mac C libraries often have peculiar implementations of
-malloc/free. (For instance, free() may not return the freed space to the
-Mac Memory Manager. This is undesirable for the IJG code because jmemmgr.c
-already clumps space requests.)
-
-
-Macintosh, Metrowerks CodeWarrior:
-
-The Unix-command-line-style interface can be used by defining USE_CCOMMAND.
-You'll also need to define TWO_FILE_COMMANDLINE to avoid stdin/stdout.
-This means that when using the cjpeg/djpeg programs, you'll have to type the
-input and output file names in the "Arguments" text-edit box, rather than
-using the file radio buttons. (Perhaps USE_FDOPEN or USE_SETMODE would
-eliminate the problem, but I haven't heard from anyone who's tried it.)
-
-On 680x0 Macs, Metrowerks defines type "double" as a 10-byte IEEE extended
-float. jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power
-of 2. Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint.
-
-The supplied configuration file jconfig.mac can be used for your jconfig.h;
-it includes all the recommended symbol definitions. If you have AppleScript
-installed, you can run the supplied script makeproj.mac to create CodeWarrior
-project files for the library and the testbed applications, then build the
-library and applications. (Thanks to Dan Sears and Don Agro for this nifty
-hack, which saves us from trying to maintain CodeWarrior project files as part
-of the IJG distribution...)
-
-
-Macintosh, Think C:
-
-The documentation in Jim Brunner's "JPEG Convert" source code (see above)
-includes detailed build instructions for Think C; it's probably somewhat
-out of date for the current release, but may be helpful.
-
-If you want to build the minimal command line version, proceed as follows.
-You'll have to prepare project files for the programs; we don't include any
-in the distribution since they are not text files. Use the file lists in
-any of the supplied makefiles as a guide. Also add the ANSI and Unix C
-libraries in a separate segment. You may need to divide the JPEG files into
-more than one segment; we recommend dividing compression and decompression
-modules. Define USE_CCOMMAND in jconfig.h so that the ccommand() routine is
-called. You must also define TWO_FILE_COMMANDLINE because stdin/stdout
-don't handle binary data correctly.
-
-On 680x0 Macs, Think C defines type "double" as a 12-byte IEEE extended float.
-jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power of 2.
-Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint.
-
-jconfig.mac should work as a jconfig.h configuration file for Think C,
-but the makeproj.mac AppleScript script is specific to CodeWarrior. Sorry.
-
-
-MIPS R3000:
-
-MIPS's cc version 1.31 has a rather nasty optimization bug. Don't use -O
-if you have that compiler version. (Use "cc -V" to check the version.)
-Note that the R3000 chip is found in workstations from DEC and others.
-
-
-MS-DOS, generic comments for 16-bit compilers:
-
-The IJG code is designed to work well in 80x86 "small" or "medium" memory
-models (i.e., data pointers are 16 bits unless explicitly declared "far";
-code pointers can be either size). You may be able to use small model to
-compile cjpeg or djpeg by itself, but you will probably have to use medium
-model for any larger application. This won't make much difference in
-performance. You *will* take a noticeable performance hit if you use a
-large-data memory model, and you should avoid "huge" model if at all
-possible. Be sure that NEED_FAR_POINTERS is defined in jconfig.h if you use
-a small-data memory model; be sure it is NOT defined if you use a large-data
-model. (The supplied makefiles and jconfig files for Borland and Microsoft C
-compile in medium model and define NEED_FAR_POINTERS.)
-
-The DOS-specific memory manager, jmemdos.c, should be used if possible.
-It needs some assembly-code routines which are in jmemdosa.asm; make sure
-your makefile assembles that file and includes it in the library. If you
-don't have a suitable assembler, you can get pre-assembled object files for
-jmemdosa by FTP from ftp.uu.net:/graphics/jpeg/jdosaobj.zip. (DOS-oriented
-distributions of the IJG source code often include these object files.)
-
-When using jmemdos.c, jconfig.h must define USE_MSDOS_MEMMGR and must set
-MAX_ALLOC_CHUNK to less than 64K (65520L is a typical value). If your
-C library's far-heap malloc() can't allocate blocks that large, reduce
-MAX_ALLOC_CHUNK to whatever it can handle.
-
-If you can't use jmemdos.c for some reason --- for example, because you
-don't have an assembler to assemble jmemdosa.asm --- you'll have to fall
-back to jmemansi.c or jmemname.c. You'll probably still need to set
-MAX_ALLOC_CHUNK in jconfig.h, because most DOS C libraries won't malloc()
-more than 64K at a time. IMPORTANT: if you use jmemansi.c or jmemname.c,
-you will have to compile in a large-data memory model in order to get the
-right stdio library. Too bad.
-
-wrjpgcom needs to be compiled in large model, because it malloc()s a 64KB
-work area to hold the comment text. If your C library's malloc can't
-handle that, reduce MAX_COM_LENGTH as necessary in wrjpgcom.c.
-
-Most MS-DOS compilers treat stdin/stdout as text files, so you must use
-two-file command line style. But if your compiler has either fdopen() or
-setmode(), you can use one-file style if you like. To do this, define
-USE_SETMODE or USE_FDOPEN so that stdin/stdout will be set to binary mode.
-(USE_SETMODE seems to work with more DOS compilers than USE_FDOPEN.) You
-should test that I/O through stdin/stdout produces the same results as I/O
-to explicitly named files... the "make test" procedures in the supplied
-makefiles do NOT use stdin/stdout.
-
-
-MS-DOS, generic comments for 32-bit compilers:
-
-None of the above comments about memory models apply if you are using a
-32-bit flat-memory-space environment, such as DJGPP or Watcom C. (And you
-should use one if you have it, as performance will be much better than
-8086-compatible code!) For flat-memory-space compilers, do NOT define
-NEED_FAR_POINTERS, and do NOT use jmemdos.c. Use jmemnobs.c if the
-environment supplies adequate virtual memory, otherwise use jmemansi.c or
-jmemname.c.
-
-You'll still need to be careful about binary I/O through stdin/stdout.
-See the last paragraph of the previous section.
-
-
-MS-DOS, Borland C:
-
-Be sure to convert all the source files to DOS text format (CR/LF newlines).
-Although Borland C will often work OK with unmodified Unix (LF newlines)
-source files, sometimes it will give bogus compile errors.
-"Illegal character '#'" is the most common such error. (This is true with
-Borland C 3.1, but perhaps is fixed in newer releases.)
-
-If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE.
-jconfig.bcc already includes #define USE_SETMODE to make this work.
-(fdopen does not work correctly.)
-
-
-MS-DOS, Microsoft C:
-
-makefile.mc6 works with Microsoft C, DOS Visual C++, etc. It should only
-be used if you want to build a 16-bit (small or medium memory model) program.
-
-If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE.
-jconfig.mc6 already includes #define USE_SETMODE to make this work.
-(fdopen does not work correctly.)
-
-Note that this makefile assumes that the working copy of itself is called
-"makefile". If you want to call it something else, say "makefile.mak",
-be sure to adjust the dependency line that reads "$(RFILE) : makefile".
-Otherwise the make will fail because it doesn't know how to create "makefile".
-Worse, some releases of Microsoft's make utilities give an incorrect error
-message in this situation.
-
-Old versions of MS C fail with an "out of macro expansion space" error
-because they can't cope with the macro TRACEMS8 (defined in jerror.h).
-If this happens to you, the easiest solution is to change TRACEMS8 to
-expand to nothing. You'll lose the ability to dump out JPEG coefficient
-tables with djpeg -debug -debug, but at least you can compile.
-
-Original MS C 6.0 is very buggy; it compiles incorrect code unless you turn
-off optimization entirely (remove -O from CFLAGS). 6.00A is better, but it
-still generates bad code if you enable loop optimizations (-Ol or -Ox).
-
-MS C 8.0 crashes when compiling jquant1.c with optimization switch /Oo ...
-which is on by default. To work around this bug, compile that one file
-with /Oo-.
-
-
-Microsoft Windows (all versions), generic comments:
-
-Some Windows system include files define typedef boolean as "unsigned char".
-The IJG code also defines typedef boolean, but we make it "int" by default.
-This doesn't affect the IJG programs because we don't import those Windows
-include files. But if you use the JPEG library in your own program, and some
-of your program's files import one definition of boolean while some import the
-other, you can get all sorts of mysterious problems. A good preventive step
-is to make the IJG library use "unsigned char" for boolean. To do that,
-add something like this to your jconfig.h file:
- /* Define "boolean" as unsigned char, not int, per Windows custom */
- #ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */
- typedef unsigned char boolean;
- #endif
- #define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */
-(This is already in jconfig.vc, by the way.)
-
-windef.h contains the declarations
- #define far
- #define FAR far
-Since jmorecfg.h tries to define FAR as empty, you may get a compiler
-warning if you include both jpeglib.h and windef.h (which windows.h
-includes). To suppress the warning, you can put "#ifndef FAR"/"#endif"
-around the line "#define FAR" in jmorecfg.h.
-
-When using the library in a Windows application, you will almost certainly
-want to modify or replace the error handler module jerror.c, since our
-default error handler does a couple of inappropriate things:
- 1. it tries to write error and warning messages on stderr;
- 2. in event of a fatal error, it exits by calling exit().
-
-A simple stopgap solution for problem 1 is to replace the line
- fprintf(stderr, "%s\n", buffer);
-(in output_message in jerror.c) with
- MessageBox(GetActiveWindow(),buffer,"JPEG Error",MB_OK|MB_ICONERROR);
-It's highly recommended that you at least do that much, since otherwise
-error messages will disappear into nowhere. (Beginning with IJG v6b, this
-code is already present in jerror.c; just define USE_WINDOWS_MESSAGEBOX in
-jconfig.h to enable it.)
-
-The proper solution for problem 2 is to return control to your calling
-application after a library error. This can be done with the setjmp/longjmp
-technique discussed in libjpeg.doc and illustrated in example.c. (NOTE:
-some older Windows C compilers provide versions of setjmp/longjmp that
-don't actually work under Windows. You may need to use the Windows system
-functions Catch and Throw instead.)
-
-The recommended memory manager under Windows is jmemnobs.c; in other words,
-let Windows do any virtual memory management needed. You should NOT use
-jmemdos.c nor jmemdosa.asm under Windows.
-
-For Windows 3.1, we recommend compiling in medium or large memory model;
-for newer Windows versions, use a 32-bit flat memory model. (See the MS-DOS
-sections above for more info about memory models.) In the 16-bit memory
-models only, you'll need to put
- #define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */
-into jconfig.h to limit allocation chunks to 64Kb. (Without that, you'd
-have to use huge memory model, which slows things down unnecessarily.)
-jmemnobs.c works without modification in large or flat memory models, but to
-use medium model, you need to modify its jpeg_get_large and jpeg_free_large
-routines to allocate far memory. In any case, you might like to replace
-its calls to malloc and free with direct calls on Windows memory allocation
-functions.
-
-You may also want to modify jdatasrc.c and jdatadst.c to use Windows file
-operations rather than fread/fwrite. This is only necessary if your C
-compiler doesn't provide a competent implementation of C stdio functions.
-
-You might want to tweak the RGB_xxx macros in jmorecfg.h so that the library
-will accept or deliver color pixels in BGR sample order, not RGB; BGR order
-is usually more convenient under Windows. Note that this change will break
-the sample applications cjpeg/djpeg, but the library itself works fine.
-
-
-Many people want to convert the IJG library into a DLL. This is reasonably
-straightforward, but watch out for the following:
-
- 1. Don't try to compile as a DLL in small or medium memory model; use
-large model, or even better, 32-bit flat model. Many places in the IJG code
-assume the address of a local variable is an ordinary (not FAR) pointer;
-that isn't true in a medium-model DLL.
-
- 2. Microsoft C cannot pass file pointers between applications and DLLs.
-(See Microsoft Knowledge Base, PSS ID Number Q50336.) So jdatasrc.c and
-jdatadst.c don't work if you open a file in your application and then pass
-the pointer to the DLL. One workaround is to make jdatasrc.c/jdatadst.c
-part of your main application rather than part of the DLL.
-
- 3. You'll probably need to modify the macros GLOBAL() and EXTERN() to
-attach suitable linkage keywords to the exported routine names. Similarly,
-you'll want to modify METHODDEF() and JMETHOD() to ensure function pointers
-are declared in a way that lets application routines be called back through
-the function pointers. These macros are in jmorecfg.h. Typical definitions
-for a 16-bit DLL are:
- #define GLOBAL(type) type _far _pascal _loadds _export
- #define EXTERN(type) extern type _far _pascal _loadds
- #define METHODDEF(type) static type _far _pascal
- #define JMETHOD(type,methodname,arglist) \
- type (_far _pascal *methodname) arglist
-For a 32-bit DLL you may want something like
- #define GLOBAL(type) __declspec(dllexport) type
- #define EXTERN(type) extern __declspec(dllexport) type
-Although not all the GLOBAL routines are actually intended to be called by
-the application, the performance cost of making them all DLL entry points is
-negligible.
-
-The unmodified IJG library presents a very C-specific application interface,
-so the resulting DLL is only usable from C or C++ applications. There has
-been some talk of writing wrapper code that would present a simpler interface
-usable from other languages, such as Visual Basic. This is on our to-do list
-but hasn't been very high priority --- any volunteers out there?
-
-
-Microsoft Windows, Borland C:
-
-The provided jconfig.bcc should work OK in a 32-bit Windows environment,
-but you'll need to tweak it in a 16-bit environment (you'd need to define
-NEED_FAR_POINTERS and MAX_ALLOC_CHUNK). Beware that makefile.bcc will need
-alteration if you want to use it for Windows --- in particular, you should
-use jmemnobs.c not jmemdos.c under Windows.
-
-Borland C++ 4.5 fails with an internal compiler error when trying to compile
-jdmerge.c in 32-bit mode. If enough people complain, perhaps Borland will fix
-it. In the meantime, the simplest known workaround is to add a redundant
-definition of the variable range_limit in h2v1_merged_upsample(), at the head
-of the block that handles odd image width (about line 268 in v6 jdmerge.c):
- /* If image width is odd, do the last output column separately */
- if (cinfo->output_width & 1) {
- register JSAMPLE * range_limit = cinfo->sample_range_limit; /* ADD THIS */
- cb = GETJSAMPLE(*inptr1);
-Pretty bizarre, especially since the very similar routine h2v2_merged_upsample
-doesn't trigger the bug.
-Recent reports suggest that this bug does not occur with "bcc32a" (the
-Pentium-optimized version of the compiler).
-
-Another report from a user of Borland C 4.5 was that incorrect code (leading
-to a color shift in processed images) was produced if any of the following
-optimization switch combinations were used:
- -Ot -Og
- -Ot -Op
- -Ot -Om
-So try backing off on optimization if you see such a problem. (Are there
-several different releases all numbered "4.5"??)
-
-
-Microsoft Windows, Microsoft Visual C++:
-
-jconfig.vc should work OK with any Microsoft compiler for a 32-bit memory
-model. makefile.vc is intended for command-line use. (If you are using
-the Developer Studio environment, you may prefer the DevStudio project
-files; see below.)
-
-Some users feel that it's easier to call the library from C++ code if you
-force VC++ to treat the library as C++ code, which you can do by renaming
-all the *.c files to *.cpp (and adjusting the makefile to match). This
-avoids the need to put extern "C" { ... } around #include "jpeglib.h" in
-your C++ application.
-
-
-Microsoft Windows, Microsoft Developer Studio:
-
-We include makefiles that should work as project files in DevStudio 4.2 or
-later. There is a library makefile that builds the IJG library as a static
-Win32 library, and an application makefile that builds the sample applications
-as Win32 console applications. (Even if you only want the library, we
-recommend building the applications so that you can run the self-test.)
-
-To use:
-1. Copy jconfig.vc to jconfig.h, makelib.ds to jpeg.mak, and
- makeapps.ds to apps.mak. (Note that the renaming is critical!)
-2. Click on the .mak files to construct project workspaces.
- (If you are using DevStudio more recent than 4.2, you'll probably
- get a message saying that the makefiles are being updated.)
-3. Build the library project, then the applications project.
-4. Move the application .exe files from `app`\Release to an
- appropriate location on your path.
-5. To perform the self-test, execute the command line
- NMAKE /f makefile.vc test
-
-
-OS/2, Borland C++:
-
-Watch out for optimization bugs in older Borland compilers; you may need
-to back off the optimization switch settings. See the comments in
-makefile.bcc.
-
-
-SGI:
-
-On some SGI systems, you may need to set "AR2= ar -ts" in the Makefile.
-If you are using configure, you can do this by saying
- ./configure RANLIB='ar -ts'
-This change is not needed on all SGIs. Use it only if the make fails at the
-stage of linking the completed programs.
-
-On the MIPS R4000 architecture (Indy, etc.), the compiler option "-mips2"
-reportedly speeds up the float DCT method substantially, enough to make it
-faster than the default int method (but still slower than the fast int
-method). If you use -mips2, you may want to alter the default DCT method to
-be float. To do this, put "#define JDCT_DEFAULT JDCT_FLOAT" in jconfig.h.
-
-
-VMS:
-
-On an Alpha/VMS system with MMS, be sure to use the "/Marco=Alpha=1"
-qualifier with MMS when building the JPEG package.
-
-VAX/VMS v5.5-1 may have problems with the test step of the build procedure
-reporting differences when it compares the original and test images. If the
-error points to the last block of the files, it is most likely bogus and may
-be safely ignored. It seems to be because the files are Stream_LF and
-Backup/Compare has difficulty with the (presumably) null padded files.
-This problem was not observed on VAX/VMS v6.1 or AXP/VMS v6.1.
diff --git a/libjpegtwrp/jcapimin.c b/libjpegtwrp/jcapimin.c
deleted file mode 100644
index 54fb8c58c..000000000
--- a/libjpegtwrp/jcapimin.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * jcapimin.c
- *
- * Copyright (C) 1994-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains application interface code for the compression half
- * of the JPEG library. These are the "minimum" API routines that may be
- * needed in either the normal full-compression case or the transcoding-only
- * case.
- *
- * Most of the routines intended to be called directly by an application
- * are in this file or in jcapistd.c. But also see jcparam.c for
- * parameter-setup helper routines, jcomapi.c for routines shared by
- * compression and decompression, and jctrans.c for the transcoding case.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * Initialization of a JPEG compression object.
- * The error manager must already be set up (in case memory manager fails).
- */
-
-GLOBAL(void)
-jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize)
-{
- int i;
-
- /* Guard against version mismatches between library and caller. */
- cinfo->mem = NULL; /* so jpeg_destroy knows mem mgr not called */
- if (version != JPEG_LIB_VERSION)
- ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version);
- if (structsize != SIZEOF(struct jpeg_compress_struct))
- ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE,
- (int) SIZEOF(struct jpeg_compress_struct), (int) structsize);
-
- /* For debugging purposes, we zero the whole master structure.
- * But the application has already set the err pointer, and may have set
- * client_data, so we have to save and restore those fields.
- * Note: if application hasn't set client_data, tools like Purify may
- * complain here.
- */
- {
- struct jpeg_error_mgr * err = cinfo->err;
- void * client_data = cinfo->client_data; /* ignore Purify complaint here */
- MEMZERO(cinfo, SIZEOF(struct jpeg_compress_struct));
- cinfo->err = err;
- cinfo->client_data = client_data;
- }
- cinfo->is_decompressor = FALSE;
-
- /* Initialize a memory manager instance for this object */
- jinit_memory_mgr((j_common_ptr) cinfo);
-
- /* Zero out pointers to permanent structures. */
- cinfo->progress = NULL;
- cinfo->dest = NULL;
-
- cinfo->comp_info = NULL;
-
- for (i = 0; i < NUM_QUANT_TBLS; i++)
- cinfo->quant_tbl_ptrs[i] = NULL;
-
- for (i = 0; i < NUM_HUFF_TBLS; i++) {
- cinfo->dc_huff_tbl_ptrs[i] = NULL;
- cinfo->ac_huff_tbl_ptrs[i] = NULL;
- }
-
- cinfo->script_space = NULL;
-
- cinfo->input_gamma = 1.0; /* in case application forgets */
-
- /* OK, I'm ready */
- cinfo->global_state = CSTATE_START;
-}
-
-
-/*
- * Destruction of a JPEG compression object
- */
-
-GLOBAL(void)
-jpeg_destroy_compress (j_compress_ptr cinfo)
-{
- jpeg_destroy((j_common_ptr) cinfo); /* use common routine */
-}
-
-
-/*
- * Abort processing of a JPEG compression operation,
- * but don't destroy the object itself.
- */
-
-GLOBAL(void)
-jpeg_abort_compress (j_compress_ptr cinfo)
-{
- jpeg_abort((j_common_ptr) cinfo); /* use common routine */
-}
-
-
-/*
- * Forcibly suppress or un-suppress all quantization and Huffman tables.
- * Marks all currently defined tables as already written (if suppress)
- * or not written (if !suppress). This will control whether they get emitted
- * by a subsequent jpeg_start_compress call.
- *
- * This routine is exported for use by applications that want to produce
- * abbreviated JPEG datastreams. It logically belongs in jcparam.c, but
- * since it is called by jpeg_start_compress, we put it here --- otherwise
- * jcparam.o would be linked whether the application used it or not.
- */
-
-GLOBAL(void)
-jpeg_suppress_tables (j_compress_ptr cinfo, boolean suppress)
-{
- int i;
- JQUANT_TBL * qtbl;
- JHUFF_TBL * htbl;
-
- for (i = 0; i < NUM_QUANT_TBLS; i++) {
- if ((qtbl = cinfo->quant_tbl_ptrs[i]) != NULL)
- qtbl->sent_table = suppress;
- }
-
- for (i = 0; i < NUM_HUFF_TBLS; i++) {
- if ((htbl = cinfo->dc_huff_tbl_ptrs[i]) != NULL)
- htbl->sent_table = suppress;
- if ((htbl = cinfo->ac_huff_tbl_ptrs[i]) != NULL)
- htbl->sent_table = suppress;
- }
-}
-
-
-/*
- * Finish JPEG compression.
- *
- * If a multipass operating mode was selected, this may do a great deal of
- * work including most of the actual output.
- */
-
-GLOBAL(void)
-jpeg_finish_compress (j_compress_ptr cinfo)
-{
- JDIMENSION iMCU_row;
-
- if (cinfo->global_state == CSTATE_SCANNING ||
- cinfo->global_state == CSTATE_RAW_OK) {
- /* Terminate first pass */
- if (cinfo->next_scanline < cinfo->image_height)
- ERREXIT(cinfo, JERR_TOO_LITTLE_DATA);
- (*cinfo->master->finish_pass) (cinfo);
- } else if (cinfo->global_state != CSTATE_WRCOEFS)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- /* Perform any remaining passes */
- while (! cinfo->master->is_last_pass) {
- (*cinfo->master->prepare_for_pass) (cinfo);
- for (iMCU_row = 0; iMCU_row < cinfo->total_iMCU_rows; iMCU_row++) {
- if (cinfo->progress != NULL) {
- cinfo->progress->pass_counter = (long) iMCU_row;
- cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows;
- (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
- }
- /* We bypass the main controller and invoke coef controller directly;
- * all work is being done from the coefficient buffer.
- */
- if (! (*cinfo->coef->compress_data) (cinfo, (JSAMPIMAGE) NULL))
- ERREXIT(cinfo, JERR_CANT_SUSPEND);
- }
- (*cinfo->master->finish_pass) (cinfo);
- }
- /* Write EOI, do final cleanup */
- (*cinfo->marker->write_file_trailer) (cinfo);
- (*cinfo->dest->term_destination) (cinfo);
- /* We can use jpeg_abort to release memory and reset global_state */
- jpeg_abort((j_common_ptr) cinfo);
-}
-
-
-/*
- * Write a special marker.
- * This is only recommended for writing COM or APPn markers.
- * Must be called after jpeg_start_compress() and before
- * first call to jpeg_write_scanlines() or jpeg_write_raw_data().
- */
-
-GLOBAL(void)
-jpeg_write_marker (j_compress_ptr cinfo, int marker,
- const JOCTET *dataptr, unsigned int datalen)
-{
- JMETHOD(void, write_marker_byte, (j_compress_ptr info, int val));
-
- if (cinfo->next_scanline != 0 ||
- (cinfo->global_state != CSTATE_SCANNING &&
- cinfo->global_state != CSTATE_RAW_OK &&
- cinfo->global_state != CSTATE_WRCOEFS))
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
- (*cinfo->marker->write_marker_header) (cinfo, marker, datalen);
- write_marker_byte = cinfo->marker->write_marker_byte; /* copy for speed */
- while (datalen--) {
- (*write_marker_byte) (cinfo, *dataptr);
- dataptr++;
- }
-}
-
-/* Same, but piecemeal. */
-
-GLOBAL(void)
-jpeg_write_m_header (j_compress_ptr cinfo, int marker, unsigned int datalen)
-{
- if (cinfo->next_scanline != 0 ||
- (cinfo->global_state != CSTATE_SCANNING &&
- cinfo->global_state != CSTATE_RAW_OK &&
- cinfo->global_state != CSTATE_WRCOEFS))
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
- (*cinfo->marker->write_marker_header) (cinfo, marker, datalen);
-}
-
-GLOBAL(void)
-jpeg_write_m_byte (j_compress_ptr cinfo, int val)
-{
- (*cinfo->marker->write_marker_byte) (cinfo, val);
-}
-
-
-/*
- * Alternate compression function: just write an abbreviated table file.
- * Before calling this, all parameters and a data destination must be set up.
- *
- * To produce a pair of files containing abbreviated tables and abbreviated
- * image data, one would proceed as follows:
- *
- * initialize JPEG object
- * set JPEG parameters
- * set destination to table file
- * jpeg_write_tables(cinfo);
- * set destination to image file
- * jpeg_start_compress(cinfo, FALSE);
- * write data...
- * jpeg_finish_compress(cinfo);
- *
- * jpeg_write_tables has the side effect of marking all tables written
- * (same as jpeg_suppress_tables(..., TRUE)). Thus a subsequent start_compress
- * will not re-emit the tables unless it is passed write_all_tables=TRUE.
- */
-
-GLOBAL(void)
-jpeg_write_tables (j_compress_ptr cinfo)
-{
- if (cinfo->global_state != CSTATE_START)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
- /* (Re)initialize error mgr and destination modules */
- (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
- (*cinfo->dest->init_destination) (cinfo);
- /* Initialize the marker writer ... bit of a crock to do it here. */
- jinit_marker_writer(cinfo);
- /* Write them tables! */
- (*cinfo->marker->write_tables_only) (cinfo);
- /* And clean up. */
- (*cinfo->dest->term_destination) (cinfo);
- /*
- * In library releases up through v6a, we called jpeg_abort() here to free
- * any working memory allocated by the destination manager and marker
- * writer. Some applications had a problem with that: they allocated space
- * of their own from the library memory manager, and didn't want it to go
- * away during write_tables. So now we do nothing. This will cause a
- * memory leak if an app calls write_tables repeatedly without doing a full
- * compression cycle or otherwise resetting the JPEG object. However, that
- * seems less bad than unexpectedly freeing memory in the normal case.
- * An app that prefers the old behavior can call jpeg_abort for itself after
- * each call to jpeg_write_tables().
- */
-}
diff --git a/libjpegtwrp/jcapistd.c b/libjpegtwrp/jcapistd.c
deleted file mode 100644
index c0320b1b1..000000000
--- a/libjpegtwrp/jcapistd.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * jcapistd.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains application interface code for the compression half
- * of the JPEG library. These are the "standard" API routines that are
- * used in the normal full-compression case. They are not used by a
- * transcoding-only application. Note that if an application links in
- * jpeg_start_compress, it will end up linking in the entire compressor.
- * We thus must separate this file from jcapimin.c to avoid linking the
- * whole compression library into a transcoder.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * Compression initialization.
- * Before calling this, all parameters and a data destination must be set up.
- *
- * We require a write_all_tables parameter as a failsafe check when writing
- * multiple datastreams from the same compression object. Since prior runs
- * will have left all the tables marked sent_table=TRUE, a subsequent run
- * would emit an abbreviated stream (no tables) by default. This may be what
- * is wanted, but for safety's sake it should not be the default behavior:
- * programmers should have to make a deliberate choice to emit abbreviated
- * images. Therefore the documentation and examples should encourage people
- * to pass write_all_tables=TRUE; then it will take active thought to do the
- * wrong thing.
- */
-
-GLOBAL(void)
-jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables)
-{
- if (cinfo->global_state != CSTATE_START)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
- if (write_all_tables)
- jpeg_suppress_tables(cinfo, FALSE); /* mark all tables to be written */
-
- /* (Re)initialize error mgr and destination modules */
- (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
- (*cinfo->dest->init_destination) (cinfo);
- /* Perform master selection of active modules */
- jinit_compress_master(cinfo);
- /* Set up for the first pass */
- (*cinfo->master->prepare_for_pass) (cinfo);
- /* Ready for application to drive first pass through jpeg_write_scanlines
- * or jpeg_write_raw_data.
- */
- cinfo->next_scanline = 0;
- cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING);
-}
-
-
-/*
- * Write some scanlines of data to the JPEG compressor.
- *
- * The return value will be the number of lines actually written.
- * This should be less than the supplied num_lines only in case that
- * the data destination module has requested suspension of the compressor,
- * or if more than image_height scanlines are passed in.
- *
- * Note: we warn about excess calls to jpeg_write_scanlines() since
- * this likely signals an application programmer error. However,
- * excess scanlines passed in the last valid call are *silently* ignored,
- * so that the application need not adjust num_lines for end-of-image
- * when using a multiple-scanline buffer.
- */
-
-GLOBAL(JDIMENSION)
-jpeg_write_scanlines (j_compress_ptr cinfo, JSAMPARRAY scanlines,
- JDIMENSION num_lines)
-{
- JDIMENSION row_ctr, rows_left;
-
- if (cinfo->global_state != CSTATE_SCANNING)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- if (cinfo->next_scanline >= cinfo->image_height)
- WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
-
- /* Call progress monitor hook if present */
- if (cinfo->progress != NULL) {
- cinfo->progress->pass_counter = (long) cinfo->next_scanline;
- cinfo->progress->pass_limit = (long) cinfo->image_height;
- (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
- }
-
- /* Give master control module another chance if this is first call to
- * jpeg_write_scanlines. This lets output of the frame/scan headers be
- * delayed so that application can write COM, etc, markers between
- * jpeg_start_compress and jpeg_write_scanlines.
- */
- if (cinfo->master->call_pass_startup)
- (*cinfo->master->pass_startup) (cinfo);
-
- /* Ignore any extra scanlines at bottom of image. */
- rows_left = cinfo->image_height - cinfo->next_scanline;
- if (num_lines > rows_left)
- num_lines = rows_left;
-
- row_ctr = 0;
- (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines);
- cinfo->next_scanline += row_ctr;
- return row_ctr;
-}
-
-
-/*
- * Alternate entry point to write raw data.
- * Processes exactly one iMCU row per call, unless suspended.
- */
-
-GLOBAL(JDIMENSION)
-jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data,
- JDIMENSION num_lines)
-{
- JDIMENSION lines_per_iMCU_row;
-
- if (cinfo->global_state != CSTATE_RAW_OK)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- if (cinfo->next_scanline >= cinfo->image_height) {
- WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
- return 0;
- }
-
- /* Call progress monitor hook if present */
- if (cinfo->progress != NULL) {
- cinfo->progress->pass_counter = (long) cinfo->next_scanline;
- cinfo->progress->pass_limit = (long) cinfo->image_height;
- (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
- }
-
- /* Give master control module another chance if this is first call to
- * jpeg_write_raw_data. This lets output of the frame/scan headers be
- * delayed so that application can write COM, etc, markers between
- * jpeg_start_compress and jpeg_write_raw_data.
- */
- if (cinfo->master->call_pass_startup)
- (*cinfo->master->pass_startup) (cinfo);
-
- /* Verify that at least one iMCU row has been passed. */
- lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE;
- if (num_lines < lines_per_iMCU_row)
- ERREXIT(cinfo, JERR_BUFFER_SIZE);
-
- /* Directly compress the row. */
- if (! (*cinfo->coef->compress_data) (cinfo, data)) {
- /* If compressor did not consume the whole row, suspend processing. */
- return 0;
- }
-
- /* OK, we processed one iMCU row. */
- cinfo->next_scanline += lines_per_iMCU_row;
- return lines_per_iMCU_row;
-}
diff --git a/libjpegtwrp/jccoefct.c b/libjpegtwrp/jccoefct.c
deleted file mode 100644
index 1963ddb61..000000000
--- a/libjpegtwrp/jccoefct.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * jccoefct.c
- *
- * Copyright (C) 1994-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains the coefficient buffer controller for compression.
- * This controller is the top level of the JPEG compressor proper.
- * The coefficient buffer lies between forward-DCT and entropy encoding steps.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* We use a full-image coefficient buffer when doing Huffman optimization,
- * and also for writing multiple-scan JPEG files. In all cases, the DCT
- * step is run during the first pass, and subsequent passes need only read
- * the buffered coefficients.
- */
-#ifdef ENTROPY_OPT_SUPPORTED
-#define FULL_COEF_BUFFER_SUPPORTED
-#else
-#ifdef C_MULTISCAN_FILES_SUPPORTED
-#define FULL_COEF_BUFFER_SUPPORTED
-#endif
-#endif
-
-
-/* Private buffer controller object */
-
-typedef struct {
- struct jpeg_c_coef_controller pub; /* public fields */
-
- JDIMENSION iMCU_row_num; /* iMCU row # within image */
- JDIMENSION mcu_ctr; /* counts MCUs processed in current row */
- int MCU_vert_offset; /* counts MCU rows within iMCU row */
- int MCU_rows_per_iMCU_row; /* number of such rows needed */
-
- /* For single-pass compression, it's sufficient to buffer just one MCU
- * (although this may prove a bit slow in practice). We allocate a
- * workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it for each
- * MCU constructed and sent. (On 80x86, the workspace is FAR even though
- * it's not really very big; this is to keep the module interfaces unchanged
- * when a large coefficient buffer is necessary.)
- * In multi-pass modes, this array points to the current MCU's blocks
- * within the virtual arrays.
- */
- JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU];
-
- /* In multi-pass modes, we need a virtual block array for each component. */
- jvirt_barray_ptr whole_image[MAX_COMPONENTS];
-} my_coef_controller;
-
-typedef my_coef_controller * my_coef_ptr;
-
-
-/* Forward declarations */
-METHODDEF(boolean) compress_data
- JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
-#ifdef FULL_COEF_BUFFER_SUPPORTED
-METHODDEF(boolean) compress_first_pass
- JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
-METHODDEF(boolean) compress_output
- JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
-#endif
-
-
-LOCAL(void)
-start_iMCU_row (j_compress_ptr cinfo)
-/* Reset within-iMCU-row counters for a new row */
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-
- /* In an interleaved scan, an MCU row is the same as an iMCU row.
- * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows.
- * But at the bottom of the image, process only what's left.
- */
- if (cinfo->comps_in_scan > 1) {
- coef->MCU_rows_per_iMCU_row = 1;
- } else {
- if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1))
- coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor;
- else
- coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height;
- }
-
- coef->mcu_ctr = 0;
- coef->MCU_vert_offset = 0;
-}
-
-
-/*
- * Initialize for a processing pass.
- */
-
-METHODDEF(void)
-start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-
- coef->iMCU_row_num = 0;
- start_iMCU_row(cinfo);
-
- switch (pass_mode) {
- case JBUF_PASS_THRU:
- if (coef->whole_image[0] != NULL)
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
- coef->pub.compress_data = compress_data;
- break;
-#ifdef FULL_COEF_BUFFER_SUPPORTED
- case JBUF_SAVE_AND_PASS:
- if (coef->whole_image[0] == NULL)
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
- coef->pub.compress_data = compress_first_pass;
- break;
- case JBUF_CRANK_DEST:
- if (coef->whole_image[0] == NULL)
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
- coef->pub.compress_data = compress_output;
- break;
-#endif
- default:
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
- break;
- }
-}
-
-
-/*
- * Process some data in the single-pass case.
- * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
- * per call, ie, v_samp_factor block rows for each component in the image.
- * Returns TRUE if the iMCU row is completed, FALSE if suspended.
- *
- * NB: input_buf contains a plane for each component in image,
- * which we index according to the component's SOF position.
- */
-
-METHODDEF(boolean)
-compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
- JDIMENSION MCU_col_num; /* index of current MCU within row */
- JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
- JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
- int blkn, bi, ci, yindex, yoffset, blockcnt;
- JDIMENSION ypos, xpos;
- jpeg_component_info *compptr;
-
- /* Loop to write as much as one whole iMCU row */
- for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
- yoffset++) {
- for (MCU_col_num = coef->mcu_ctr; MCU_col_num <= last_MCU_col;
- MCU_col_num++) {
- /* Determine where data comes from in input_buf and do the DCT thing.
- * Each call on forward_DCT processes a horizontal row of DCT blocks
- * as wide as an MCU; we rely on having allocated the MCU_buffer[] blocks
- * sequentially. Dummy blocks at the right or bottom edge are filled in
- * specially. The data in them does not matter for image reconstruction,
- * so we fill them with values that will encode to the smallest amount of
- * data, viz: all zeroes in the AC entries, DC entries equal to previous
- * block's DC value. (Thanks to Thomas Kinsman for this idea.)
- */
- blkn = 0;
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
- : compptr->last_col_width;
- xpos = MCU_col_num * compptr->MCU_sample_width;
- ypos = yoffset * DCTSIZE; /* ypos == (yoffset+yindex) * DCTSIZE */
- for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
- if (coef->iMCU_row_num < last_iMCU_row ||
- yoffset+yindex < compptr->last_row_height) {
- (*cinfo->fdct->forward_DCT) (cinfo, compptr,
- input_buf[compptr->component_index],
- coef->MCU_buffer[blkn],
- ypos, xpos, (JDIMENSION) blockcnt);
- if (blockcnt < compptr->MCU_width) {
- /* Create some dummy blocks at the right edge of the image. */
- jzero_far((void FAR *) coef->MCU_buffer[blkn + blockcnt],
- (compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK));
- for (bi = blockcnt; bi < compptr->MCU_width; bi++) {
- coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0];
- }
- }
- } else {
- /* Create a row of dummy blocks at the bottom of the image. */
- jzero_far((void FAR *) coef->MCU_buffer[blkn],
- compptr->MCU_width * SIZEOF(JBLOCK));
- for (bi = 0; bi < compptr->MCU_width; bi++) {
- coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0];
- }
- }
- blkn += compptr->MCU_width;
- ypos += DCTSIZE;
- }
- }
- /* Try to write the MCU. In event of a suspension failure, we will
- * re-DCT the MCU on restart (a bit inefficient, could be fixed...)
- */
- if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) {
- /* Suspension forced; update state counters and exit */
- coef->MCU_vert_offset = yoffset;
- coef->mcu_ctr = MCU_col_num;
- return FALSE;
- }
- }
- /* Completed an MCU row, but perhaps not an iMCU row */
- coef->mcu_ctr = 0;
- }
- /* Completed the iMCU row, advance counters for next one */
- coef->iMCU_row_num++;
- start_iMCU_row(cinfo);
- return TRUE;
-}
-
-
-#ifdef FULL_COEF_BUFFER_SUPPORTED
-
-/*
- * Process some data in the first pass of a multi-pass case.
- * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
- * per call, ie, v_samp_factor block rows for each component in the image.
- * This amount of data is read from the source buffer, DCT'd and quantized,
- * and saved into the virtual arrays. We also generate suitable dummy blocks
- * as needed at the right and lower edges. (The dummy blocks are constructed
- * in the virtual arrays, which have been padded appropriately.) This makes
- * it possible for subsequent passes not to worry about real vs. dummy blocks.
- *
- * We must also emit the data to the entropy encoder. This is conveniently
- * done by calling compress_output() after we've loaded the current strip
- * of the virtual arrays.
- *
- * NB: input_buf contains a plane for each component in image. All
- * components are DCT'd and loaded into the virtual arrays in this pass.
- * However, it may be that only a subset of the components are emitted to
- * the entropy encoder during this first pass; be careful about looking
- * at the scan-dependent variables (MCU dimensions, etc).
- */
-
-METHODDEF(boolean)
-compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
- JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
- JDIMENSION blocks_across, MCUs_across, MCUindex;
- int bi, ci, h_samp_factor, block_row, block_rows, ndummy;
- JCOEF lastDC;
- jpeg_component_info *compptr;
- JBLOCKARRAY buffer;
- JBLOCKROW thisblockrow, lastblockrow;
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- /* Align the virtual buffer for this component. */
- buffer = (*cinfo->mem->access_virt_barray)
- ((j_common_ptr) cinfo, coef->whole_image[ci],
- coef->iMCU_row_num * compptr->v_samp_factor,
- (JDIMENSION) compptr->v_samp_factor, TRUE);
- /* Count non-dummy DCT block rows in this iMCU row. */
- if (coef->iMCU_row_num < last_iMCU_row)
- block_rows = compptr->v_samp_factor;
- else {
- /* NB: can't use last_row_height here, since may not be set! */
- block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
- if (block_rows == 0) block_rows = compptr->v_samp_factor;
- }
- blocks_across = compptr->width_in_blocks;
- h_samp_factor = compptr->h_samp_factor;
- /* Count number of dummy blocks to be added at the right margin. */
- ndummy = (int) (blocks_across % h_samp_factor);
- if (ndummy > 0)
- ndummy = h_samp_factor - ndummy;
- /* Perform DCT for all non-dummy blocks in this iMCU row. Each call
- * on forward_DCT processes a complete horizontal row of DCT blocks.
- */
- for (block_row = 0; block_row < block_rows; block_row++) {
- thisblockrow = buffer[block_row];
- (*cinfo->fdct->forward_DCT) (cinfo, compptr,
- input_buf[ci], thisblockrow,
- (JDIMENSION) (block_row * DCTSIZE),
- (JDIMENSION) 0, blocks_across);
- if (ndummy > 0) {
- /* Create dummy blocks at the right edge of the image. */
- thisblockrow += blocks_across; /* => first dummy block */
- jzero_far((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK));
- lastDC = thisblockrow[-1][0];
- for (bi = 0; bi < ndummy; bi++) {
- thisblockrow[bi][0] = lastDC;
- }
- }
- }
- /* If at end of image, create dummy block rows as needed.
- * The tricky part here is that within each MCU, we want the DC values
- * of the dummy blocks to match the last real block's DC value.
- * This squeezes a few more bytes out of the resulting file...
- */
- if (coef->iMCU_row_num == last_iMCU_row) {
- blocks_across += ndummy; /* include lower right corner */
- MCUs_across = blocks_across / h_samp_factor;
- for (block_row = block_rows; block_row < compptr->v_samp_factor;
- block_row++) {
- thisblockrow = buffer[block_row];
- lastblockrow = buffer[block_row-1];
- jzero_far((void FAR *) thisblockrow,
- (size_t) (blocks_across * SIZEOF(JBLOCK)));
- for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) {
- lastDC = lastblockrow[h_samp_factor-1][0];
- for (bi = 0; bi < h_samp_factor; bi++) {
- thisblockrow[bi][0] = lastDC;
- }
- thisblockrow += h_samp_factor; /* advance to next MCU in row */
- lastblockrow += h_samp_factor;
- }
- }
- }
- }
- /* NB: compress_output will increment iMCU_row_num if successful.
- * A suspension return will result in redoing all the work above next time.
- */
-
- /* Emit data to the entropy encoder, sharing code with subsequent passes */
- return compress_output(cinfo, input_buf);
-}
-
-
-/*
- * Process some data in subsequent passes of a multi-pass case.
- * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
- * per call, ie, v_samp_factor block rows for each component in the scan.
- * The data is obtained from the virtual arrays and fed to the entropy coder.
- * Returns TRUE if the iMCU row is completed, FALSE if suspended.
- *
- * NB: input_buf is ignored; it is likely to be a NULL pointer.
- */
-
-METHODDEF(boolean)
-compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
- JDIMENSION MCU_col_num; /* index of current MCU within row */
- int blkn, ci, xindex, yindex, yoffset;
- JDIMENSION start_col;
- JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
- JBLOCKROW buffer_ptr;
- jpeg_component_info *compptr;
-
- /* Align the virtual buffers for the components used in this scan.
- * NB: during first pass, this is safe only because the buffers will
- * already be aligned properly, so jmemmgr.c won't need to do any I/O.
- */
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- buffer[ci] = (*cinfo->mem->access_virt_barray)
- ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index],
- coef->iMCU_row_num * compptr->v_samp_factor,
- (JDIMENSION) compptr->v_samp_factor, FALSE);
- }
-
- /* Loop to process one whole iMCU row */
- for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
- yoffset++) {
- for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row;
- MCU_col_num++) {
- /* Construct list of pointers to DCT blocks belonging to this MCU */
- blkn = 0; /* index of current DCT block within MCU */
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- start_col = MCU_col_num * compptr->MCU_width;
- for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
- buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
- for (xindex = 0; xindex < compptr->MCU_width; xindex++) {
- coef->MCU_buffer[blkn++] = buffer_ptr++;
- }
- }
- }
- /* Try to write the MCU. */
- if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) {
- /* Suspension forced; update state counters and exit */
- coef->MCU_vert_offset = yoffset;
- coef->mcu_ctr = MCU_col_num;
- return FALSE;
- }
- }
- /* Completed an MCU row, but perhaps not an iMCU row */
- coef->mcu_ctr = 0;
- }
- /* Completed the iMCU row, advance counters for next one */
- coef->iMCU_row_num++;
- start_iMCU_row(cinfo);
- return TRUE;
-}
-
-#endif /* FULL_COEF_BUFFER_SUPPORTED */
-
-
-/*
- * Initialize coefficient buffer controller.
- */
-
-GLOBAL(void)
-jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer)
-{
- my_coef_ptr coef;
-
- coef = (my_coef_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_coef_controller));
- cinfo->coef = (struct jpeg_c_coef_controller *) coef;
- coef->pub.start_pass = start_pass_coef;
-
- /* Create the coefficient buffer. */
- if (need_full_buffer) {
-#ifdef FULL_COEF_BUFFER_SUPPORTED
- /* Allocate a full-image virtual array for each component, */
- /* padded to a multiple of samp_factor DCT blocks in each direction. */
- int ci;
- jpeg_component_info *compptr;
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- coef->whole_image[ci] = (*cinfo->mem->request_virt_barray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
- (JDIMENSION) jround_up((long) compptr->width_in_blocks,
- (long) compptr->h_samp_factor),
- (JDIMENSION) jround_up((long) compptr->height_in_blocks,
- (long) compptr->v_samp_factor),
- (JDIMENSION) compptr->v_samp_factor);
- }
-#else
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-#endif
- } else {
- /* We only need a single-MCU buffer. */
- JBLOCKROW buffer;
- int i;
-
- buffer = (JBLOCKROW)
- (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
- for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) {
- coef->MCU_buffer[i] = buffer + i;
- }
- coef->whole_image[0] = NULL; /* flag for no virtual arrays */
- }
-}
diff --git a/libjpegtwrp/jccolor.c b/libjpegtwrp/jccolor.c
deleted file mode 100644
index 57a76c36b..000000000
--- a/libjpegtwrp/jccolor.c
+++ /dev/null
@@ -1,527 +0,0 @@
-/*
- * jccolor.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains input colorspace conversion routines.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-// this enables unrolling null_convert's loop, and reading/write ints for speed
-#define ENABLE_ANDROID_NULL_CONVERT
-
-/* Private subobject */
-
-typedef struct {
- struct jpeg_color_converter pub; /* public fields */
-
- /* Private state for RGB->YCC conversion */
- INT32 * rgb_ycc_tab; /* => table for RGB to YCbCr conversion */
-} my_color_converter;
-
-typedef my_color_converter * my_cconvert_ptr;
-
-
-/**************** RGB -> YCbCr conversion: most common case **************/
-
-/*
- * YCbCr is defined per CCIR 601-1, except that Cb and Cr are
- * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
- * The conversion equations to be implemented are therefore
- * Y = 0.29900 * R + 0.58700 * G + 0.11400 * B
- * Cb = -0.16874 * R - 0.33126 * G + 0.50000 * B + CENTERJSAMPLE
- * Cr = 0.50000 * R - 0.41869 * G - 0.08131 * B + CENTERJSAMPLE
- * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
- * Note: older versions of the IJG code used a zero offset of MAXJSAMPLE/2,
- * rather than CENTERJSAMPLE, for Cb and Cr. This gave equal positive and
- * negative swings for Cb/Cr, but meant that grayscale values (Cb=Cr=0)
- * were not represented exactly. Now we sacrifice exact representation of
- * maximum red and maximum blue in order to get exact grayscales.
- *
- * To avoid floating-point arithmetic, we represent the fractional constants
- * as integers scaled up by 2^16 (about 4 digits precision); we have to divide
- * the products by 2^16, with appropriate rounding, to get the correct answer.
- *
- * For even more speed, we avoid doing any multiplications in the inner loop
- * by precalculating the constants times R,G,B for all possible values.
- * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
- * for 12-bit samples it is still acceptable. It's not very reasonable for
- * 16-bit samples, but if you want lossless storage you shouldn't be changing
- * colorspace anyway.
- * The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included
- * in the tables to save adding them separately in the inner loop.
- */
-
-#define SCALEBITS 16 /* speediest right-shift on some machines */
-#define CBCR_OFFSET ((INT32) CENTERJSAMPLE << SCALEBITS)
-#define ONE_HALF ((INT32) 1 << (SCALEBITS-1))
-#define FIX(x) ((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
-
-/* We allocate one big table and divide it up into eight parts, instead of
- * doing eight alloc_small requests. This lets us use a single table base
- * address, which can be held in a register in the inner loops on many
- * machines (more than can hold all eight addresses, anyway).
- */
-
-#define R_Y_OFF 0 /* offset to R => Y section */
-#define G_Y_OFF (1*(MAXJSAMPLE+1)) /* offset to G => Y section */
-#define B_Y_OFF (2*(MAXJSAMPLE+1)) /* etc. */
-#define R_CB_OFF (3*(MAXJSAMPLE+1))
-#define G_CB_OFF (4*(MAXJSAMPLE+1))
-#define B_CB_OFF (5*(MAXJSAMPLE+1))
-#define R_CR_OFF B_CB_OFF /* B=>Cb, R=>Cr are the same */
-#define G_CR_OFF (6*(MAXJSAMPLE+1))
-#define B_CR_OFF (7*(MAXJSAMPLE+1))
-#define TABLE_SIZE (8*(MAXJSAMPLE+1))
-
-
-/*
- * Initialize for RGB->YCC colorspace conversion.
- */
-
-METHODDEF(void)
-rgb_ycc_start (j_compress_ptr cinfo)
-{
- my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
- INT32 * rgb_ycc_tab;
- INT32 i;
-
- /* Allocate and fill in the conversion tables. */
- cconvert->rgb_ycc_tab = rgb_ycc_tab = (INT32 *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (TABLE_SIZE * SIZEOF(INT32)));
-
- for (i = 0; i <= MAXJSAMPLE; i++) {
- rgb_ycc_tab[i+R_Y_OFF] = FIX(0.29900) * i;
- rgb_ycc_tab[i+G_Y_OFF] = FIX(0.58700) * i;
- rgb_ycc_tab[i+B_Y_OFF] = FIX(0.11400) * i + ONE_HALF;
- rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.16874)) * i;
- rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.33126)) * i;
- /* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr.
- * This ensures that the maximum output will round to MAXJSAMPLE
- * not MAXJSAMPLE+1, and thus that we don't have to range-limit.
- */
- rgb_ycc_tab[i+B_CB_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1;
-/* B=>Cb and R=>Cr tables are the same
- rgb_ycc_tab[i+R_CR_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1;
-*/
- rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.41869)) * i;
- rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.08131)) * i;
- }
-}
-
-
-/*
- * Convert some rows of samples to the JPEG colorspace.
- *
- * Note that we change from the application's interleaved-pixel format
- * to our internal noninterleaved, one-plane-per-component format.
- * The input buffer is therefore three times as wide as the output buffer.
- *
- * A starting row offset is provided only for the output buffer. The caller
- * can easily adjust the passed input_buf value to accommodate any row
- * offset required on that side.
- */
-
-METHODDEF(void)
-rgb_ycc_convert (j_compress_ptr cinfo,
- JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
- JDIMENSION output_row, int num_rows)
-{
- my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
- register int r, g, b;
- register INT32 * ctab = cconvert->rgb_ycc_tab;
- register JSAMPROW inptr;
- register JSAMPROW outptr0, outptr1, outptr2;
- register JDIMENSION col;
- JDIMENSION num_cols = cinfo->image_width;
-
- while (--num_rows >= 0) {
- inptr = *input_buf++;
- outptr0 = output_buf[0][output_row];
- outptr1 = output_buf[1][output_row];
- outptr2 = output_buf[2][output_row];
- output_row++;
- for (col = 0; col < num_cols; col++) {
- r = GETJSAMPLE(inptr[RGB_RED]);
- g = GETJSAMPLE(inptr[RGB_GREEN]);
- b = GETJSAMPLE(inptr[RGB_BLUE]);
- inptr += RGB_PIXELSIZE;
- /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations
- * must be too; we do not need an explicit range-limiting operation.
- * Hence the value being shifted is never negative, and we don't
- * need the general RIGHT_SHIFT macro.
- */
- /* Y */
- outptr0[col] = (JSAMPLE)
- ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
- >> SCALEBITS);
- /* Cb */
- outptr1[col] = (JSAMPLE)
- ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF])
- >> SCALEBITS);
- /* Cr */
- outptr2[col] = (JSAMPLE)
- ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF])
- >> SCALEBITS);
- }
- }
-}
-
-
-/**************** Cases other than RGB -> YCbCr **************/
-
-
-/*
- * Convert some rows of samples to the JPEG colorspace.
- * This version handles RGB->grayscale conversion, which is the same
- * as the RGB->Y portion of RGB->YCbCr.
- * We assume rgb_ycc_start has been called (we only use the Y tables).
- */
-
-METHODDEF(void)
-rgb_gray_convert (j_compress_ptr cinfo,
- JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
- JDIMENSION output_row, int num_rows)
-{
- my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
- register int r, g, b;
- register INT32 * ctab = cconvert->rgb_ycc_tab;
- register JSAMPROW inptr;
- register JSAMPROW outptr;
- register JDIMENSION col;
- JDIMENSION num_cols = cinfo->image_width;
-
- while (--num_rows >= 0) {
- inptr = *input_buf++;
- outptr = output_buf[0][output_row];
- output_row++;
- for (col = 0; col < num_cols; col++) {
- r = GETJSAMPLE(inptr[RGB_RED]);
- g = GETJSAMPLE(inptr[RGB_GREEN]);
- b = GETJSAMPLE(inptr[RGB_BLUE]);
- inptr += RGB_PIXELSIZE;
- /* Y */
- outptr[col] = (JSAMPLE)
- ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
- >> SCALEBITS);
- }
- }
-}
-
-
-/*
- * Convert some rows of samples to the JPEG colorspace.
- * This version handles Adobe-style CMYK->YCCK conversion,
- * where we convert R=1-C, G=1-M, and B=1-Y to YCbCr using the same
- * conversion as above, while passing K (black) unchanged.
- * We assume rgb_ycc_start has been called.
- */
-
-METHODDEF(void)
-cmyk_ycck_convert (j_compress_ptr cinfo,
- JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
- JDIMENSION output_row, int num_rows)
-{
- my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
- register int r, g, b;
- register INT32 * ctab = cconvert->rgb_ycc_tab;
- register JSAMPROW inptr;
- register JSAMPROW outptr0, outptr1, outptr2, outptr3;
- register JDIMENSION col;
- JDIMENSION num_cols = cinfo->image_width;
-
- while (--num_rows >= 0) {
- inptr = *input_buf++;
- outptr0 = output_buf[0][output_row];
- outptr1 = output_buf[1][output_row];
- outptr2 = output_buf[2][output_row];
- outptr3 = output_buf[3][output_row];
- output_row++;
- for (col = 0; col < num_cols; col++) {
- r = MAXJSAMPLE - GETJSAMPLE(inptr[0]);
- g = MAXJSAMPLE - GETJSAMPLE(inptr[1]);
- b = MAXJSAMPLE - GETJSAMPLE(inptr[2]);
- /* K passes through as-is */
- outptr3[col] = inptr[3]; /* don't need GETJSAMPLE here */
- inptr += 4;
- /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations
- * must be too; we do not need an explicit range-limiting operation.
- * Hence the value being shifted is never negative, and we don't
- * need the general RIGHT_SHIFT macro.
- */
- /* Y */
- outptr0[col] = (JSAMPLE)
- ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
- >> SCALEBITS);
- /* Cb */
- outptr1[col] = (JSAMPLE)
- ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF])
- >> SCALEBITS);
- /* Cr */
- outptr2[col] = (JSAMPLE)
- ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF])
- >> SCALEBITS);
- }
- }
-}
-
-
-/*
- * Convert some rows of samples to the JPEG colorspace.
- * This version handles grayscale output with no conversion.
- * The source can be either plain grayscale or YCbCr (since Y == gray).
- */
-
-METHODDEF(void)
-grayscale_convert (j_compress_ptr cinfo,
- JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
- JDIMENSION output_row, int num_rows)
-{
- register JSAMPROW inptr;
- register JSAMPROW outptr;
- register JDIMENSION col;
- JDIMENSION num_cols = cinfo->image_width;
- int instride = cinfo->input_components;
-
- while (--num_rows >= 0) {
- inptr = *input_buf++;
- outptr = output_buf[0][output_row];
- output_row++;
- for (col = 0; col < num_cols; col++) {
- outptr[col] = inptr[0]; /* don't need GETJSAMPLE() here */
- inptr += instride;
- }
- }
-}
-
-#ifdef ENABLE_ANDROID_NULL_CONVERT
-
-typedef unsigned long UINT32;
-
-#define B0(n) ((n) & 0xFF)
-#define B1(n) (((n) >> 8) & 0xFF)
-#define B2(n) (((n) >> 16) & 0xFF)
-#define B3(n) ((n) >> 24)
-
-#define PACK(a, b, c, d) ((a) | ((b) << 8) | ((c) << 16) | ((d) << 24))
-
-static int ptr_is_quad(const void* p)
-{
- return (((const char*)p - (const char*)0) & 3) == 0;
-}
-
-static void copyquads(const UINT32 in[], UINT32 out0[], UINT32 out1[], UINT32 out2[], int col4)
-{
- do {
- UINT32 src0 = *in++;
- UINT32 src1 = *in++;
- UINT32 src2 = *in++;
- // LEndian
- *out0++ = PACK(B0(src0), B3(src0), B2(src1), B1(src2));
- *out1++ = PACK(B1(src0), B0(src1), B3(src1), B2(src2));
- *out2++ = PACK(B2(src0), B1(src1), B0(src2), B3(src2));
- } while (--col4 != 0);
-}
-
-#endif
-
-/*
- * Convert some rows of samples to the JPEG colorspace.
- * This version handles multi-component colorspaces without conversion.
- * We assume input_components == num_components.
- */
-
-METHODDEF(void)
-null_convert (j_compress_ptr cinfo,
- JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
- JDIMENSION output_row, int num_rows)
-{
- register JSAMPROW inptr;
- register JSAMPROW outptr;
- register JDIMENSION col;
- register int ci;
- int nc = cinfo->num_components;
- JDIMENSION num_cols = cinfo->image_width;
-
-#ifdef ENABLE_ANDROID_NULL_CONVERT
- if (1 == num_rows && 3 == nc && num_cols > 0) {
- JSAMPROW inptr = *input_buf;
- JSAMPROW outptr0 = output_buf[0][output_row];
- JSAMPROW outptr1 = output_buf[1][output_row];
- JSAMPROW outptr2 = output_buf[2][output_row];
-
- int col = num_cols;
- int col4 = col >> 2;
- if (col4 > 0 && ptr_is_quad(inptr) && ptr_is_quad(outptr0) &&
- ptr_is_quad(outptr1) && ptr_is_quad(outptr2)) {
-
- const UINT32* in = (const UINT32*)inptr;
- UINT32* out0 = (UINT32*)outptr0;
- UINT32* out1 = (UINT32*)outptr1;
- UINT32* out2 = (UINT32*)outptr2;
- copyquads(in, out0, out1, out2, col4);
- col &= 3;
- if (0 == col)
- return;
- col4 <<= 2;
- inptr += col4 * 3; /* we read this 3 times per in copyquads */
- outptr0 += col4;
- outptr1 += col4;
- outptr2 += col4;
- /* fall through to while-loop */
- }
- do {
- *outptr0++ = *inptr++;
- *outptr1++ = *inptr++;
- *outptr2++ = *inptr++;
- } while (--col != 0);
- return;
- }
-SLOW:
-#endif
- while (--num_rows >= 0) {
- /* It seems fastest to make a separate pass for each component. */
- for (ci = 0; ci < nc; ci++) {
- inptr = *input_buf;
- outptr = output_buf[ci][output_row];
- for (col = 0; col < num_cols; col++) {
- outptr[col] = inptr[ci]; /* don't need GETJSAMPLE() here */
- inptr += nc;
- }
- }
- input_buf++;
- output_row++;
- }
-}
-
-
-/*
- * Empty method for start_pass.
- */
-
-METHODDEF(void)
-null_method (j_compress_ptr cinfo)
-{
- /* no work needed */
-}
-
-
-/*
- * Module initialization routine for input colorspace conversion.
- */
-
-GLOBAL(void)
-jinit_color_converter (j_compress_ptr cinfo)
-{
- my_cconvert_ptr cconvert;
-
- cconvert = (my_cconvert_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_color_converter));
- cinfo->cconvert = (struct jpeg_color_converter *) cconvert;
- /* set start_pass to null method until we find out differently */
- cconvert->pub.start_pass = null_method;
-
- /* Make sure input_components agrees with in_color_space */
- switch (cinfo->in_color_space) {
- case JCS_GRAYSCALE:
- if (cinfo->input_components != 1)
- ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
- break;
-
- case JCS_RGB:
-#if RGB_PIXELSIZE != 3
- if (cinfo->input_components != RGB_PIXELSIZE)
- ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
- break;
-#endif /* else share code with YCbCr */
-
- case JCS_YCbCr:
- if (cinfo->input_components != 3)
- ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
- break;
-
- case JCS_CMYK:
- case JCS_YCCK:
- if (cinfo->input_components != 4)
- ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
- break;
-
- default: /* JCS_UNKNOWN can be anything */
- if (cinfo->input_components < 1)
- ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
- break;
- }
-
- /* Check num_components, set conversion method based on requested space */
- switch (cinfo->jpeg_color_space) {
- case JCS_GRAYSCALE:
- if (cinfo->num_components != 1)
- ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
- if (cinfo->in_color_space == JCS_GRAYSCALE)
- cconvert->pub.color_convert = grayscale_convert;
- else if (cinfo->in_color_space == JCS_RGB) {
- cconvert->pub.start_pass = rgb_ycc_start;
- cconvert->pub.color_convert = rgb_gray_convert;
- } else if (cinfo->in_color_space == JCS_YCbCr)
- cconvert->pub.color_convert = grayscale_convert;
- else
- ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
- break;
-
- case JCS_RGB:
- if (cinfo->num_components != 3)
- ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
- if (cinfo->in_color_space == JCS_RGB && RGB_PIXELSIZE == 3)
- cconvert->pub.color_convert = null_convert;
- else
- ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
- break;
-
- case JCS_YCbCr:
- if (cinfo->num_components != 3)
- ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
- if (cinfo->in_color_space == JCS_RGB) {
- cconvert->pub.start_pass = rgb_ycc_start;
- cconvert->pub.color_convert = rgb_ycc_convert;
- } else if (cinfo->in_color_space == JCS_YCbCr)
- cconvert->pub.color_convert = null_convert;
- else
- ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
- break;
-
- case JCS_CMYK:
- if (cinfo->num_components != 4)
- ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
- if (cinfo->in_color_space == JCS_CMYK)
- cconvert->pub.color_convert = null_convert;
- else
- ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
- break;
-
- case JCS_YCCK:
- if (cinfo->num_components != 4)
- ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
- if (cinfo->in_color_space == JCS_CMYK) {
- cconvert->pub.start_pass = rgb_ycc_start;
- cconvert->pub.color_convert = cmyk_ycck_convert;
- } else if (cinfo->in_color_space == JCS_YCCK)
- cconvert->pub.color_convert = null_convert;
- else
- ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
- break;
-
- default: /* allow null conversion of JCS_UNKNOWN */
- if (cinfo->jpeg_color_space != cinfo->in_color_space ||
- cinfo->num_components != cinfo->input_components)
- ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
- cconvert->pub.color_convert = null_convert;
- break;
- }
-}
diff --git a/libjpegtwrp/jcdctmgr.c b/libjpegtwrp/jcdctmgr.c
deleted file mode 100644
index 61fa79b9e..000000000
--- a/libjpegtwrp/jcdctmgr.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * jcdctmgr.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains the forward-DCT management logic.
- * This code selects a particular DCT implementation to be used,
- * and it performs related housekeeping chores including coefficient
- * quantization.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdct.h" /* Private declarations for DCT subsystem */
-
-
-/* Private subobject for this module */
-
-typedef struct {
- struct jpeg_forward_dct pub; /* public fields */
-
- /* Pointer to the DCT routine actually in use */
- forward_DCT_method_ptr do_dct;
-
- /* The actual post-DCT divisors --- not identical to the quant table
- * entries, because of scaling (especially for an unnormalized DCT).
- * Each table is given in normal array order.
- */
- DCTELEM * divisors[NUM_QUANT_TBLS];
-
-#ifdef DCT_FLOAT_SUPPORTED
- /* Same as above for the floating-point case. */
- float_DCT_method_ptr do_float_dct;
- FAST_FLOAT * float_divisors[NUM_QUANT_TBLS];
-#endif
-} my_fdct_controller;
-
-typedef my_fdct_controller * my_fdct_ptr;
-
-
-/*
- * Initialize for a processing pass.
- * Verify that all referenced Q-tables are present, and set up
- * the divisor table for each one.
- * In the current implementation, DCT of all components is done during
- * the first pass, even if only some components will be output in the
- * first scan. Hence all components should be examined here.
- */
-
-METHODDEF(void)
-start_pass_fdctmgr (j_compress_ptr cinfo)
-{
- my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
- int ci, qtblno, i;
- jpeg_component_info *compptr;
- JQUANT_TBL * qtbl;
- DCTELEM * dtbl;
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- qtblno = compptr->quant_tbl_no;
- /* Make sure specified quantization table is present */
- if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS ||
- cinfo->quant_tbl_ptrs[qtblno] == NULL)
- ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno);
- qtbl = cinfo->quant_tbl_ptrs[qtblno];
- /* Compute divisors for this quant table */
- /* We may do this more than once for same table, but it's not a big deal */
- switch (cinfo->dct_method) {
-#ifdef DCT_ISLOW_SUPPORTED
- case JDCT_ISLOW:
- /* For LL&M IDCT method, divisors are equal to raw quantization
- * coefficients multiplied by 8 (to counteract scaling).
- */
- if (fdct->divisors[qtblno] == NULL) {
- fdct->divisors[qtblno] = (DCTELEM *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- DCTSIZE2 * SIZEOF(DCTELEM));
- }
- dtbl = fdct->divisors[qtblno];
- for (i = 0; i < DCTSIZE2; i++) {
- dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3;
- }
- break;
-#endif
-#ifdef DCT_IFAST_SUPPORTED
- case JDCT_IFAST:
- {
- /* For AA&N IDCT method, divisors are equal to quantization
- * coefficients scaled by scalefactor[row]*scalefactor[col], where
- * scalefactor[0] = 1
- * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7
- * We apply a further scale factor of 8.
- */
-#define CONST_BITS 14
- static const INT16 aanscales[DCTSIZE2] = {
- /* precomputed values scaled up by 14 bits */
- 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520,
- 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270,
- 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906,
- 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315,
- 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520,
- 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552,
- 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446,
- 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247
- };
- SHIFT_TEMPS
-
- if (fdct->divisors[qtblno] == NULL) {
- fdct->divisors[qtblno] = (DCTELEM *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- DCTSIZE2 * SIZEOF(DCTELEM));
- }
- dtbl = fdct->divisors[qtblno];
- for (i = 0; i < DCTSIZE2; i++) {
- dtbl[i] = (DCTELEM)
- DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
- (INT32) aanscales[i]),
- CONST_BITS-3);
- }
- }
- break;
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
- case JDCT_FLOAT:
- {
- /* For float AA&N IDCT method, divisors are equal to quantization
- * coefficients scaled by scalefactor[row]*scalefactor[col], where
- * scalefactor[0] = 1
- * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7
- * We apply a further scale factor of 8.
- * What's actually stored is 1/divisor so that the inner loop can
- * use a multiplication rather than a division.
- */
- FAST_FLOAT * fdtbl;
- int row, col;
- static const double aanscalefactor[DCTSIZE] = {
- 1.0, 1.387039845, 1.306562965, 1.175875602,
- 1.0, 0.785694958, 0.541196100, 0.275899379
- };
-
- if (fdct->float_divisors[qtblno] == NULL) {
- fdct->float_divisors[qtblno] = (FAST_FLOAT *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- DCTSIZE2 * SIZEOF(FAST_FLOAT));
- }
- fdtbl = fdct->float_divisors[qtblno];
- i = 0;
- for (row = 0; row < DCTSIZE; row++) {
- for (col = 0; col < DCTSIZE; col++) {
- fdtbl[i] = (FAST_FLOAT)
- (1.0 / (((double) qtbl->quantval[i] *
- aanscalefactor[row] * aanscalefactor[col] * 8.0)));
- i++;
- }
- }
- }
- break;
-#endif
- default:
- ERREXIT(cinfo, JERR_NOT_COMPILED);
- break;
- }
- }
-}
-
-
-/*
- * Perform forward DCT on one or more blocks of a component.
- *
- * The input samples are taken from the sample_data[] array starting at
- * position start_row/start_col, and moving to the right for any additional
- * blocks. The quantized coefficients are returned in coef_blocks[].
- */
-
-METHODDEF(void)
-forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
- JDIMENSION start_row, JDIMENSION start_col,
- JDIMENSION num_blocks)
-/* This version is used for integer DCT implementations. */
-{
- /* This routine is heavily used, so it's worth coding it tightly. */
- my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
- forward_DCT_method_ptr do_dct = fdct->do_dct;
- DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no];
- DCTELEM workspace[DCTSIZE2]; /* work area for FDCT subroutine */
- JDIMENSION bi;
-
- sample_data += start_row; /* fold in the vertical offset once */
-
- for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
- /* Load data into workspace, applying unsigned->signed conversion */
- { register DCTELEM *workspaceptr;
- register JSAMPROW elemptr;
- register int elemr;
-
- workspaceptr = workspace;
- for (elemr = 0; elemr < DCTSIZE; elemr++) {
- elemptr = sample_data[elemr] + start_col;
-#if DCTSIZE == 8 /* unroll the inner loop */
- *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
- *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
- *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
- *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
- *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
- *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
- *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
- *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-#else
- { register int elemc;
- for (elemc = DCTSIZE; elemc > 0; elemc--) {
- *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
- }
- }
-#endif
- }
- }
-
- /* Perform the DCT */
- (*do_dct) (workspace);
-
- /* Quantize/descale the coefficients, and store into coef_blocks[] */
- { register DCTELEM temp, qval;
- register int i;
- register JCOEFPTR output_ptr = coef_blocks[bi];
-
- for (i = 0; i < DCTSIZE2; i++) {
- qval = divisors[i];
- temp = workspace[i];
- /* Divide the coefficient value by qval, ensuring proper rounding.
- * Since C does not specify the direction of rounding for negative
- * quotients, we have to force the dividend positive for portability.
- *
- * In most files, at least half of the output values will be zero
- * (at default quantization settings, more like three-quarters...)
- * so we should ensure that this case is fast. On many machines,
- * a comparison is enough cheaper than a divide to make a special test
- * a win. Since both inputs will be nonnegative, we need only test
- * for a < b to discover whether a/b is 0.
- * If your machine's division is fast enough, define FAST_DIVIDE.
- */
-#ifdef FAST_DIVIDE
-#define DIVIDE_BY(a,b) a /= b
-#else
-#define DIVIDE_BY(a,b) if (a >= b) a /= b; else a = 0
-#endif
- if (temp < 0) {
- temp = -temp;
- temp += qval>>1; /* for rounding */
- DIVIDE_BY(temp, qval);
- temp = -temp;
- } else {
- temp += qval>>1; /* for rounding */
- DIVIDE_BY(temp, qval);
- }
- output_ptr[i] = (JCOEF) temp;
- }
- }
- }
-}
-
-
-#ifdef DCT_FLOAT_SUPPORTED
-
-METHODDEF(void)
-forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
- JDIMENSION start_row, JDIMENSION start_col,
- JDIMENSION num_blocks)
-/* This version is used for floating-point DCT implementations. */
-{
- /* This routine is heavily used, so it's worth coding it tightly. */
- my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
- float_DCT_method_ptr do_dct = fdct->do_float_dct;
- FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no];
- FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */
- JDIMENSION bi;
-
- sample_data += start_row; /* fold in the vertical offset once */
-
- for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
- /* Load data into workspace, applying unsigned->signed conversion */
- { register FAST_FLOAT *workspaceptr;
- register JSAMPROW elemptr;
- register int elemr;
-
- workspaceptr = workspace;
- for (elemr = 0; elemr < DCTSIZE; elemr++) {
- elemptr = sample_data[elemr] + start_col;
-#if DCTSIZE == 8 /* unroll the inner loop */
- *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
- *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
- *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
- *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
- *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
- *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
- *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
- *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-#else
- { register int elemc;
- for (elemc = DCTSIZE; elemc > 0; elemc--) {
- *workspaceptr++ = (FAST_FLOAT)
- (GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
- }
- }
-#endif
- }
- }
-
- /* Perform the DCT */
- (*do_dct) (workspace);
-
- /* Quantize/descale the coefficients, and store into coef_blocks[] */
- { register FAST_FLOAT temp;
- register int i;
- register JCOEFPTR output_ptr = coef_blocks[bi];
-
- for (i = 0; i < DCTSIZE2; i++) {
- /* Apply the quantization and scaling factor */
- temp = workspace[i] * divisors[i];
- /* Round to nearest integer.
- * Since C does not specify the direction of rounding for negative
- * quotients, we have to force the dividend positive for portability.
- * The maximum coefficient size is +-16K (for 12-bit data), so this
- * code should work for either 16-bit or 32-bit ints.
- */
- output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384);
- }
- }
- }
-}
-
-#endif /* DCT_FLOAT_SUPPORTED */
-
-
-/*
- * Initialize FDCT manager.
- */
-
-GLOBAL(void)
-jinit_forward_dct (j_compress_ptr cinfo)
-{
- my_fdct_ptr fdct;
- int i;
-
- fdct = (my_fdct_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_fdct_controller));
- cinfo->fdct = (struct jpeg_forward_dct *) fdct;
- fdct->pub.start_pass = start_pass_fdctmgr;
-
- switch (cinfo->dct_method) {
-#ifdef DCT_ISLOW_SUPPORTED
- case JDCT_ISLOW:
- fdct->pub.forward_DCT = forward_DCT;
- fdct->do_dct = jpeg_fdct_islow;
- break;
-#endif
-#ifdef DCT_IFAST_SUPPORTED
- case JDCT_IFAST:
- fdct->pub.forward_DCT = forward_DCT;
- fdct->do_dct = jpeg_fdct_ifast;
- break;
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
- case JDCT_FLOAT:
- fdct->pub.forward_DCT = forward_DCT_float;
- fdct->do_float_dct = jpeg_fdct_float;
- break;
-#endif
- default:
- ERREXIT(cinfo, JERR_NOT_COMPILED);
- break;
- }
-
- /* Mark divisor tables unallocated */
- for (i = 0; i < NUM_QUANT_TBLS; i++) {
- fdct->divisors[i] = NULL;
-#ifdef DCT_FLOAT_SUPPORTED
- fdct->float_divisors[i] = NULL;
-#endif
- }
-}
diff --git a/libjpegtwrp/jchuff.c b/libjpegtwrp/jchuff.c
deleted file mode 100644
index f23525054..000000000
--- a/libjpegtwrp/jchuff.c
+++ /dev/null
@@ -1,909 +0,0 @@
-/*
- * jchuff.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains Huffman entropy encoding routines.
- *
- * Much of the complexity here has to do with supporting output suspension.
- * If the data destination module demands suspension, we want to be able to
- * back up to the start of the current MCU. To do this, we copy state
- * variables into local working storage, and update them back to the
- * permanent JPEG objects only upon successful completion of an MCU.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jchuff.h" /* Declarations shared with jcphuff.c */
-
-
-/* Expanded entropy encoder object for Huffman encoding.
- *
- * The savable_state subrecord contains fields that change within an MCU,
- * but must not be updated permanently until we complete the MCU.
- */
-
-typedef struct {
- INT32 put_buffer; /* current bit-accumulation buffer */
- int put_bits; /* # of bits now in it */
- int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
-} savable_state;
-
-/* This macro is to work around compilers with missing or broken
- * structure assignment. You'll need to fix this code if you have
- * such a compiler and you change MAX_COMPS_IN_SCAN.
- */
-
-#ifndef NO_STRUCT_ASSIGN
-#define ASSIGN_STATE(dest,src) ((dest) = (src))
-#else
-#if MAX_COMPS_IN_SCAN == 4
-#define ASSIGN_STATE(dest,src) \
- ((dest).put_buffer = (src).put_buffer, \
- (dest).put_bits = (src).put_bits, \
- (dest).last_dc_val[0] = (src).last_dc_val[0], \
- (dest).last_dc_val[1] = (src).last_dc_val[1], \
- (dest).last_dc_val[2] = (src).last_dc_val[2], \
- (dest).last_dc_val[3] = (src).last_dc_val[3])
-#endif
-#endif
-
-
-typedef struct {
- struct jpeg_entropy_encoder pub; /* public fields */
-
- savable_state saved; /* Bit buffer & DC state at start of MCU */
-
- /* These fields are NOT loaded into local working state. */
- unsigned int restarts_to_go; /* MCUs left in this restart interval */
- int next_restart_num; /* next restart number to write (0-7) */
-
- /* Pointers to derived tables (these workspaces have image lifespan) */
- c_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS];
- c_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS];
-
-#ifdef ENTROPY_OPT_SUPPORTED /* Statistics tables for optimization */
- long * dc_count_ptrs[NUM_HUFF_TBLS];
- long * ac_count_ptrs[NUM_HUFF_TBLS];
-#endif
-} huff_entropy_encoder;
-
-typedef huff_entropy_encoder * huff_entropy_ptr;
-
-/* Working state while writing an MCU.
- * This struct contains all the fields that are needed by subroutines.
- */
-
-typedef struct {
- JOCTET * next_output_byte; /* => next byte to write in buffer */
- size_t free_in_buffer; /* # of byte spaces remaining in buffer */
- savable_state cur; /* Current bit buffer & DC state */
- j_compress_ptr cinfo; /* dump_buffer needs access to this */
-} working_state;
-
-
-/* Forward declarations */
-METHODDEF(boolean) encode_mcu_huff JPP((j_compress_ptr cinfo,
- JBLOCKROW *MCU_data));
-METHODDEF(void) finish_pass_huff JPP((j_compress_ptr cinfo));
-#ifdef ENTROPY_OPT_SUPPORTED
-METHODDEF(boolean) encode_mcu_gather JPP((j_compress_ptr cinfo,
- JBLOCKROW *MCU_data));
-METHODDEF(void) finish_pass_gather JPP((j_compress_ptr cinfo));
-#endif
-
-
-/*
- * Initialize for a Huffman-compressed scan.
- * If gather_statistics is TRUE, we do not output anything during the scan,
- * just count the Huffman symbols used and generate Huffman code tables.
- */
-
-METHODDEF(void)
-start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics)
-{
- huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
- int ci, dctbl, actbl;
- jpeg_component_info * compptr;
-
- if (gather_statistics) {
-#ifdef ENTROPY_OPT_SUPPORTED
- entropy->pub.encode_mcu = encode_mcu_gather;
- entropy->pub.finish_pass = finish_pass_gather;
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
- } else {
- entropy->pub.encode_mcu = encode_mcu_huff;
- entropy->pub.finish_pass = finish_pass_huff;
- }
-
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- dctbl = compptr->dc_tbl_no;
- actbl = compptr->ac_tbl_no;
- if (gather_statistics) {
-#ifdef ENTROPY_OPT_SUPPORTED
- /* Check for invalid table indexes */
- /* (make_c_derived_tbl does this in the other path) */
- if (dctbl < 0 || dctbl >= NUM_HUFF_TBLS)
- ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, dctbl);
- if (actbl < 0 || actbl >= NUM_HUFF_TBLS)
- ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, actbl);
- /* Allocate and zero the statistics tables */
- /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */
- if (entropy->dc_count_ptrs[dctbl] == NULL)
- entropy->dc_count_ptrs[dctbl] = (long *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- 257 * SIZEOF(long));
- MEMZERO(entropy->dc_count_ptrs[dctbl], 257 * SIZEOF(long));
- if (entropy->ac_count_ptrs[actbl] == NULL)
- entropy->ac_count_ptrs[actbl] = (long *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- 257 * SIZEOF(long));
- MEMZERO(entropy->ac_count_ptrs[actbl], 257 * SIZEOF(long));
-#endif
- } else {
- /* Compute derived values for Huffman tables */
- /* We may do this more than once for a table, but it's not expensive */
- jpeg_make_c_derived_tbl(cinfo, TRUE, dctbl,
- & entropy->dc_derived_tbls[dctbl]);
- jpeg_make_c_derived_tbl(cinfo, FALSE, actbl,
- & entropy->ac_derived_tbls[actbl]);
- }
- /* Initialize DC predictions to 0 */
- entropy->saved.last_dc_val[ci] = 0;
- }
-
- /* Initialize bit buffer to empty */
- entropy->saved.put_buffer = 0;
- entropy->saved.put_bits = 0;
-
- /* Initialize restart stuff */
- entropy->restarts_to_go = cinfo->restart_interval;
- entropy->next_restart_num = 0;
-}
-
-
-/*
- * Compute the derived values for a Huffman table.
- * This routine also performs some validation checks on the table.
- *
- * Note this is also used by jcphuff.c.
- */
-
-GLOBAL(void)
-jpeg_make_c_derived_tbl (j_compress_ptr cinfo, boolean isDC, int tblno,
- c_derived_tbl ** pdtbl)
-{
- JHUFF_TBL *htbl;
- c_derived_tbl *dtbl;
- int p, i, l, lastp, si, maxsymbol;
- char huffsize[257];
- unsigned int huffcode[257];
- unsigned int code;
-
- /* Note that huffsize[] and huffcode[] are filled in code-length order,
- * paralleling the order of the symbols themselves in htbl->huffval[].
- */
-
- /* Find the input Huffman table */
- if (tblno < 0 || tblno >= NUM_HUFF_TBLS)
- ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
- htbl =
- isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno];
- if (htbl == NULL)
- ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
-
- /* Allocate a workspace if we haven't already done so. */
- if (*pdtbl == NULL)
- *pdtbl = (c_derived_tbl *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(c_derived_tbl));
- dtbl = *pdtbl;
-
- /* Figure C.1: make table of Huffman code length for each symbol */
-
- p = 0;
- for (l = 1; l <= 16; l++) {
- i = (int) htbl->bits[l];
- if (i < 0 || p + i > 256) /* protect against table overrun */
- ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
- while (i--)
- huffsize[p++] = (char) l;
- }
- huffsize[p] = 0;
- lastp = p;
-
- /* Figure C.2: generate the codes themselves */
- /* We also validate that the counts represent a legal Huffman code tree. */
-
- code = 0;
- si = huffsize[0];
- p = 0;
- while (huffsize[p]) {
- while (((int) huffsize[p]) == si) {
- huffcode[p++] = code;
- code++;
- }
- /* code is now 1 more than the last code used for codelength si; but
- * it must still fit in si bits, since no code is allowed to be all ones.
- */
- if (((INT32) code) >= (((INT32) 1) << si))
- ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
- code <<= 1;
- si++;
- }
-
- /* Figure C.3: generate encoding tables */
- /* These are code and size indexed by symbol value */
-
- /* Set all codeless symbols to have code length 0;
- * this lets us detect duplicate VAL entries here, and later
- * allows emit_bits to detect any attempt to emit such symbols.
- */
- MEMZERO(dtbl->ehufsi, SIZEOF(dtbl->ehufsi));
-
- /* This is also a convenient place to check for out-of-range
- * and duplicated VAL entries. We allow 0..255 for AC symbols
- * but only 0..15 for DC. (We could constrain them further
- * based on data depth and mode, but this seems enough.)
- */
- maxsymbol = isDC ? 15 : 255;
-
- for (p = 0; p < lastp; p++) {
- i = htbl->huffval[p];
- if (i < 0 || i > maxsymbol || dtbl->ehufsi[i])
- ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
- dtbl->ehufco[i] = huffcode[p];
- dtbl->ehufsi[i] = huffsize[p];
- }
-}
-
-
-/* Outputting bytes to the file */
-
-/* Emit a byte, taking 'action' if must suspend. */
-#define emit_byte(state,val,action) \
- { *(state)->next_output_byte++ = (JOCTET) (val); \
- if (--(state)->free_in_buffer == 0) \
- if (! dump_buffer(state)) \
- { action; } }
-
-
-LOCAL(boolean)
-dump_buffer (working_state * state)
-/* Empty the output buffer; return TRUE if successful, FALSE if must suspend */
-{
- struct jpeg_destination_mgr * dest = state->cinfo->dest;
-
- if (! (*dest->empty_output_buffer) (state->cinfo))
- return FALSE;
- /* After a successful buffer dump, must reset buffer pointers */
- state->next_output_byte = dest->next_output_byte;
- state->free_in_buffer = dest->free_in_buffer;
- return TRUE;
-}
-
-
-/* Outputting bits to the file */
-
-/* Only the right 24 bits of put_buffer are used; the valid bits are
- * left-justified in this part. At most 16 bits can be passed to emit_bits
- * in one call, and we never retain more than 7 bits in put_buffer
- * between calls, so 24 bits are sufficient.
- */
-
-INLINE
-LOCAL(boolean)
-emit_bits (working_state * state, unsigned int code, int size)
-/* Emit some bits; return TRUE if successful, FALSE if must suspend */
-{
- /* This routine is heavily used, so it's worth coding tightly. */
- register INT32 put_buffer = (INT32) code;
- register int put_bits = state->cur.put_bits;
-
- /* if size is 0, caller used an invalid Huffman table entry */
- if (size == 0)
- ERREXIT(state->cinfo, JERR_HUFF_MISSING_CODE);
-
- put_buffer &= (((INT32) 1)<<size) - 1; /* mask off any extra bits in code */
-
- put_bits += size; /* new number of bits in buffer */
-
- put_buffer <<= 24 - put_bits; /* align incoming bits */
-
- put_buffer |= state->cur.put_buffer; /* and merge with old buffer contents */
-
- while (put_bits >= 8) {
- int c = (int) ((put_buffer >> 16) & 0xFF);
-
- emit_byte(state, c, return FALSE);
- if (c == 0xFF) { /* need to stuff a zero byte? */
- emit_byte(state, 0, return FALSE);
- }
- put_buffer <<= 8;
- put_bits -= 8;
- }
-
- state->cur.put_buffer = put_buffer; /* update state variables */
- state->cur.put_bits = put_bits;
-
- return TRUE;
-}
-
-
-LOCAL(boolean)
-flush_bits (working_state * state)
-{
- if (! emit_bits(state, 0x7F, 7)) /* fill any partial byte with ones */
- return FALSE;
- state->cur.put_buffer = 0; /* and reset bit-buffer to empty */
- state->cur.put_bits = 0;
- return TRUE;
-}
-
-
-/* Encode a single block's worth of coefficients */
-
-LOCAL(boolean)
-encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val,
- c_derived_tbl *dctbl, c_derived_tbl *actbl)
-{
- register int temp, temp2;
- register int nbits;
- register int k, r, i;
-
- /* Encode the DC coefficient difference per section F.1.2.1 */
-
- temp = temp2 = block[0] - last_dc_val;
-
- if (temp < 0) {
- temp = -temp; /* temp is abs value of input */
- /* For a negative input, want temp2 = bitwise complement of abs(input) */
- /* This code assumes we are on a two's complement machine */
- temp2--;
- }
-
- /* Find the number of bits needed for the magnitude of the coefficient */
- nbits = 0;
- while (temp) {
- nbits++;
- temp >>= 1;
- }
- /* Check for out-of-range coefficient values.
- * Since we're encoding a difference, the range limit is twice as much.
- */
- if (nbits > MAX_COEF_BITS+1)
- ERREXIT(state->cinfo, JERR_BAD_DCT_COEF);
-
- /* Emit the Huffman-coded symbol for the number of bits */
- if (! emit_bits(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits]))
- return FALSE;
-
- /* Emit that number of bits of the value, if positive, */
- /* or the complement of its magnitude, if negative. */
- if (nbits) /* emit_bits rejects calls with size 0 */
- if (! emit_bits(state, (unsigned int) temp2, nbits))
- return FALSE;
-
- /* Encode the AC coefficients per section F.1.2.2 */
-
- r = 0; /* r = run length of zeros */
-
- for (k = 1; k < DCTSIZE2; k++) {
- if ((temp = block[jpeg_natural_order[k]]) == 0) {
- r++;
- } else {
- /* if run length > 15, must emit special run-length-16 codes (0xF0) */
- while (r > 15) {
- if (! emit_bits(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0]))
- return FALSE;
- r -= 16;
- }
-
- temp2 = temp;
- if (temp < 0) {
- temp = -temp; /* temp is abs value of input */
- /* This code assumes we are on a two's complement machine */
- temp2--;
- }
-
- /* Find the number of bits needed for the magnitude of the coefficient */
- nbits = 1; /* there must be at least one 1 bit */
- while ((temp >>= 1))
- nbits++;
- /* Check for out-of-range coefficient values */
- if (nbits > MAX_COEF_BITS)
- ERREXIT(state->cinfo, JERR_BAD_DCT_COEF);
-
- /* Emit Huffman symbol for run length / number of bits */
- i = (r << 4) + nbits;
- if (! emit_bits(state, actbl->ehufco[i], actbl->ehufsi[i]))
- return FALSE;
-
- /* Emit that number of bits of the value, if positive, */
- /* or the complement of its magnitude, if negative. */
- if (! emit_bits(state, (unsigned int) temp2, nbits))
- return FALSE;
-
- r = 0;
- }
- }
-
- /* If the last coef(s) were zero, emit an end-of-block code */
- if (r > 0)
- if (! emit_bits(state, actbl->ehufco[0], actbl->ehufsi[0]))
- return FALSE;
-
- return TRUE;
-}
-
-
-/*
- * Emit a restart marker & resynchronize predictions.
- */
-
-LOCAL(boolean)
-emit_restart (working_state * state, int restart_num)
-{
- int ci;
-
- if (! flush_bits(state))
- return FALSE;
-
- emit_byte(state, 0xFF, return FALSE);
- emit_byte(state, JPEG_RST0 + restart_num, return FALSE);
-
- /* Re-initialize DC predictions to 0 */
- for (ci = 0; ci < state->cinfo->comps_in_scan; ci++)
- state->cur.last_dc_val[ci] = 0;
-
- /* The restart counter is not updated until we successfully write the MCU. */
-
- return TRUE;
-}
-
-
-/*
- * Encode and output one MCU's worth of Huffman-compressed coefficients.
- */
-
-METHODDEF(boolean)
-encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
- huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
- working_state state;
- int blkn, ci;
- jpeg_component_info * compptr;
-
- /* Load up working state */
- state.next_output_byte = cinfo->dest->next_output_byte;
- state.free_in_buffer = cinfo->dest->free_in_buffer;
- ASSIGN_STATE(state.cur, entropy->saved);
- state.cinfo = cinfo;
-
- /* Emit restart marker if needed */
- if (cinfo->restart_interval) {
- if (entropy->restarts_to_go == 0)
- if (! emit_restart(&state, entropy->next_restart_num))
- return FALSE;
- }
-
- /* Encode the MCU data blocks */
- for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
- ci = cinfo->MCU_membership[blkn];
- compptr = cinfo->cur_comp_info[ci];
- if (! encode_one_block(&state,
- MCU_data[blkn][0], state.cur.last_dc_val[ci],
- entropy->dc_derived_tbls[compptr->dc_tbl_no],
- entropy->ac_derived_tbls[compptr->ac_tbl_no]))
- return FALSE;
- /* Update last_dc_val */
- state.cur.last_dc_val[ci] = MCU_data[blkn][0][0];
- }
-
- /* Completed MCU, so update state */
- cinfo->dest->next_output_byte = state.next_output_byte;
- cinfo->dest->free_in_buffer = state.free_in_buffer;
- ASSIGN_STATE(entropy->saved, state.cur);
-
- /* Update restart-interval state too */
- if (cinfo->restart_interval) {
- if (entropy->restarts_to_go == 0) {
- entropy->restarts_to_go = cinfo->restart_interval;
- entropy->next_restart_num++;
- entropy->next_restart_num &= 7;
- }
- entropy->restarts_to_go--;
- }
-
- return TRUE;
-}
-
-
-/*
- * Finish up at the end of a Huffman-compressed scan.
- */
-
-METHODDEF(void)
-finish_pass_huff (j_compress_ptr cinfo)
-{
- huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
- working_state state;
-
- /* Load up working state ... flush_bits needs it */
- state.next_output_byte = cinfo->dest->next_output_byte;
- state.free_in_buffer = cinfo->dest->free_in_buffer;
- ASSIGN_STATE(state.cur, entropy->saved);
- state.cinfo = cinfo;
-
- /* Flush out the last data */
- if (! flush_bits(&state))
- ERREXIT(cinfo, JERR_CANT_SUSPEND);
-
- /* Update state */
- cinfo->dest->next_output_byte = state.next_output_byte;
- cinfo->dest->free_in_buffer = state.free_in_buffer;
- ASSIGN_STATE(entropy->saved, state.cur);
-}
-
-
-/*
- * Huffman coding optimization.
- *
- * We first scan the supplied data and count the number of uses of each symbol
- * that is to be Huffman-coded. (This process MUST agree with the code above.)
- * Then we build a Huffman coding tree for the observed counts.
- * Symbols which are not needed at all for the particular image are not
- * assigned any code, which saves space in the DHT marker as well as in
- * the compressed data.
- */
-
-#ifdef ENTROPY_OPT_SUPPORTED
-
-
-/* Process a single block's worth of coefficients */
-
-LOCAL(void)
-htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val,
- long dc_counts[], long ac_counts[])
-{
- register int temp;
- register int nbits;
- register int k, r;
-
- /* Encode the DC coefficient difference per section F.1.2.1 */
-
- temp = block[0] - last_dc_val;
- if (temp < 0)
- temp = -temp;
-
- /* Find the number of bits needed for the magnitude of the coefficient */
- nbits = 0;
- while (temp) {
- nbits++;
- temp >>= 1;
- }
- /* Check for out-of-range coefficient values.
- * Since we're encoding a difference, the range limit is twice as much.
- */
- if (nbits > MAX_COEF_BITS+1)
- ERREXIT(cinfo, JERR_BAD_DCT_COEF);
-
- /* Count the Huffman symbol for the number of bits */
- dc_counts[nbits]++;
-
- /* Encode the AC coefficients per section F.1.2.2 */
-
- r = 0; /* r = run length of zeros */
-
- for (k = 1; k < DCTSIZE2; k++) {
- if ((temp = block[jpeg_natural_order[k]]) == 0) {
- r++;
- } else {
- /* if run length > 15, must emit special run-length-16 codes (0xF0) */
- while (r > 15) {
- ac_counts[0xF0]++;
- r -= 16;
- }
-
- /* Find the number of bits needed for the magnitude of the coefficient */
- if (temp < 0)
- temp = -temp;
-
- /* Find the number of bits needed for the magnitude of the coefficient */
- nbits = 1; /* there must be at least one 1 bit */
- while ((temp >>= 1))
- nbits++;
- /* Check for out-of-range coefficient values */
- if (nbits > MAX_COEF_BITS)
- ERREXIT(cinfo, JERR_BAD_DCT_COEF);
-
- /* Count Huffman symbol for run length / number of bits */
- ac_counts[(r << 4) + nbits]++;
-
- r = 0;
- }
- }
-
- /* If the last coef(s) were zero, emit an end-of-block code */
- if (r > 0)
- ac_counts[0]++;
-}
-
-
-/*
- * Trial-encode one MCU's worth of Huffman-compressed coefficients.
- * No data is actually output, so no suspension return is possible.
- */
-
-METHODDEF(boolean)
-encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
- huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
- int blkn, ci;
- jpeg_component_info * compptr;
-
- /* Take care of restart intervals if needed */
- if (cinfo->restart_interval) {
- if (entropy->restarts_to_go == 0) {
- /* Re-initialize DC predictions to 0 */
- for (ci = 0; ci < cinfo->comps_in_scan; ci++)
- entropy->saved.last_dc_val[ci] = 0;
- /* Update restart state */
- entropy->restarts_to_go = cinfo->restart_interval;
- }
- entropy->restarts_to_go--;
- }
-
- for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
- ci = cinfo->MCU_membership[blkn];
- compptr = cinfo->cur_comp_info[ci];
- htest_one_block(cinfo, MCU_data[blkn][0], entropy->saved.last_dc_val[ci],
- entropy->dc_count_ptrs[compptr->dc_tbl_no],
- entropy->ac_count_ptrs[compptr->ac_tbl_no]);
- entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0];
- }
-
- return TRUE;
-}
-
-
-/*
- * Generate the best Huffman code table for the given counts, fill htbl.
- * Note this is also used by jcphuff.c.
- *
- * The JPEG standard requires that no symbol be assigned a codeword of all
- * one bits (so that padding bits added at the end of a compressed segment
- * can't look like a valid code). Because of the canonical ordering of
- * codewords, this just means that there must be an unused slot in the
- * longest codeword length category. Section K.2 of the JPEG spec suggests
- * reserving such a slot by pretending that symbol 256 is a valid symbol
- * with count 1. In theory that's not optimal; giving it count zero but
- * including it in the symbol set anyway should give a better Huffman code.
- * But the theoretically better code actually seems to come out worse in
- * practice, because it produces more all-ones bytes (which incur stuffed
- * zero bytes in the final file). In any case the difference is tiny.
- *
- * The JPEG standard requires Huffman codes to be no more than 16 bits long.
- * If some symbols have a very small but nonzero probability, the Huffman tree
- * must be adjusted to meet the code length restriction. We currently use
- * the adjustment method suggested in JPEG section K.2. This method is *not*
- * optimal; it may not choose the best possible limited-length code. But
- * typically only very-low-frequency symbols will be given less-than-optimal
- * lengths, so the code is almost optimal. Experimental comparisons against
- * an optimal limited-length-code algorithm indicate that the difference is
- * microscopic --- usually less than a hundredth of a percent of total size.
- * So the extra complexity of an optimal algorithm doesn't seem worthwhile.
- */
-
-GLOBAL(void)
-jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[])
-{
-#define MAX_CLEN 32 /* assumed maximum initial code length */
- UINT8 bits[MAX_CLEN+1]; /* bits[k] = # of symbols with code length k */
- int codesize[257]; /* codesize[k] = code length of symbol k */
- int others[257]; /* next symbol in current branch of tree */
- int c1, c2;
- int p, i, j;
- long v;
-
- /* This algorithm is explained in section K.2 of the JPEG standard */
-
- MEMZERO(bits, SIZEOF(bits));
- MEMZERO(codesize, SIZEOF(codesize));
- for (i = 0; i < 257; i++)
- others[i] = -1; /* init links to empty */
-
- freq[256] = 1; /* make sure 256 has a nonzero count */
- /* Including the pseudo-symbol 256 in the Huffman procedure guarantees
- * that no real symbol is given code-value of all ones, because 256
- * will be placed last in the largest codeword category.
- */
-
- /* Huffman's basic algorithm to assign optimal code lengths to symbols */
-
- for (;;) {
- /* Find the smallest nonzero frequency, set c1 = its symbol */
- /* In case of ties, take the larger symbol number */
- c1 = -1;
- v = 1000000000L;
- for (i = 0; i <= 256; i++) {
- if (freq[i] && freq[i] <= v) {
- v = freq[i];
- c1 = i;
- }
- }
-
- /* Find the next smallest nonzero frequency, set c2 = its symbol */
- /* In case of ties, take the larger symbol number */
- c2 = -1;
- v = 1000000000L;
- for (i = 0; i <= 256; i++) {
- if (freq[i] && freq[i] <= v && i != c1) {
- v = freq[i];
- c2 = i;
- }
- }
-
- /* Done if we've merged everything into one frequency */
- if (c2 < 0)
- break;
-
- /* Else merge the two counts/trees */
- freq[c1] += freq[c2];
- freq[c2] = 0;
-
- /* Increment the codesize of everything in c1's tree branch */
- codesize[c1]++;
- while (others[c1] >= 0) {
- c1 = others[c1];
- codesize[c1]++;
- }
-
- others[c1] = c2; /* chain c2 onto c1's tree branch */
-
- /* Increment the codesize of everything in c2's tree branch */
- codesize[c2]++;
- while (others[c2] >= 0) {
- c2 = others[c2];
- codesize[c2]++;
- }
- }
-
- /* Now count the number of symbols of each code length */
- for (i = 0; i <= 256; i++) {
- if (codesize[i]) {
- /* The JPEG standard seems to think that this can't happen, */
- /* but I'm paranoid... */
- if (codesize[i] > MAX_CLEN)
- ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW);
-
- bits[codesize[i]]++;
- }
- }
-
- /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure
- * Huffman procedure assigned any such lengths, we must adjust the coding.
- * Here is what the JPEG spec says about how this next bit works:
- * Since symbols are paired for the longest Huffman code, the symbols are
- * removed from this length category two at a time. The prefix for the pair
- * (which is one bit shorter) is allocated to one of the pair; then,
- * skipping the BITS entry for that prefix length, a code word from the next
- * shortest nonzero BITS entry is converted into a prefix for two code words
- * one bit longer.
- */
-
- for (i = MAX_CLEN; i > 16; i--) {
- while (bits[i] > 0) {
- j = i - 2; /* find length of new prefix to be used */
- while (bits[j] == 0)
- j--;
-
- bits[i] -= 2; /* remove two symbols */
- bits[i-1]++; /* one goes in this length */
- bits[j+1] += 2; /* two new symbols in this length */
- bits[j]--; /* symbol of this length is now a prefix */
- }
- }
-
- /* Remove the count for the pseudo-symbol 256 from the largest codelength */
- while (bits[i] == 0) /* find largest codelength still in use */
- i--;
- bits[i]--;
-
- /* Return final symbol counts (only for lengths 0..16) */
- MEMCOPY(htbl->bits, bits, SIZEOF(htbl->bits));
-
- /* Return a list of the symbols sorted by code length */
- /* It's not real clear to me why we don't need to consider the codelength
- * changes made above, but the JPEG spec seems to think this works.
- */
- p = 0;
- for (i = 1; i <= MAX_CLEN; i++) {
- for (j = 0; j <= 255; j++) {
- if (codesize[j] == i) {
- htbl->huffval[p] = (UINT8) j;
- p++;
- }
- }
- }
-
- /* Set sent_table FALSE so updated table will be written to JPEG file. */
- htbl->sent_table = FALSE;
-}
-
-
-/*
- * Finish up a statistics-gathering pass and create the new Huffman tables.
- */
-
-METHODDEF(void)
-finish_pass_gather (j_compress_ptr cinfo)
-{
- huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
- int ci, dctbl, actbl;
- jpeg_component_info * compptr;
- JHUFF_TBL **htblptr;
- boolean did_dc[NUM_HUFF_TBLS];
- boolean did_ac[NUM_HUFF_TBLS];
-
- /* It's important not to apply jpeg_gen_optimal_table more than once
- * per table, because it clobbers the input frequency counts!
- */
- MEMZERO(did_dc, SIZEOF(did_dc));
- MEMZERO(did_ac, SIZEOF(did_ac));
-
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- dctbl = compptr->dc_tbl_no;
- actbl = compptr->ac_tbl_no;
- if (! did_dc[dctbl]) {
- htblptr = & cinfo->dc_huff_tbl_ptrs[dctbl];
- if (*htblptr == NULL)
- *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
- jpeg_gen_optimal_table(cinfo, *htblptr, entropy->dc_count_ptrs[dctbl]);
- did_dc[dctbl] = TRUE;
- }
- if (! did_ac[actbl]) {
- htblptr = & cinfo->ac_huff_tbl_ptrs[actbl];
- if (*htblptr == NULL)
- *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
- jpeg_gen_optimal_table(cinfo, *htblptr, entropy->ac_count_ptrs[actbl]);
- did_ac[actbl] = TRUE;
- }
- }
-}
-
-
-#endif /* ENTROPY_OPT_SUPPORTED */
-
-
-/*
- * Module initialization routine for Huffman entropy encoding.
- */
-
-GLOBAL(void)
-jinit_huff_encoder (j_compress_ptr cinfo)
-{
- huff_entropy_ptr entropy;
- int i;
-
- entropy = (huff_entropy_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(huff_entropy_encoder));
- cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
- entropy->pub.start_pass = start_pass_huff;
-
- /* Mark tables unallocated */
- for (i = 0; i < NUM_HUFF_TBLS; i++) {
- entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL;
-#ifdef ENTROPY_OPT_SUPPORTED
- entropy->dc_count_ptrs[i] = entropy->ac_count_ptrs[i] = NULL;
-#endif
- }
-}
diff --git a/libjpegtwrp/jchuff.h b/libjpegtwrp/jchuff.h
deleted file mode 100644
index a9599fc1e..000000000
--- a/libjpegtwrp/jchuff.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * jchuff.h
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains declarations for Huffman entropy encoding routines
- * that are shared between the sequential encoder (jchuff.c) and the
- * progressive encoder (jcphuff.c). No other modules need to see these.
- */
-
-/* The legal range of a DCT coefficient is
- * -1024 .. +1023 for 8-bit data;
- * -16384 .. +16383 for 12-bit data.
- * Hence the magnitude should always fit in 10 or 14 bits respectively.
- */
-
-#if BITS_IN_JSAMPLE == 8
-#define MAX_COEF_BITS 10
-#else
-#define MAX_COEF_BITS 14
-#endif
-
-/* Derived data constructed for each Huffman table */
-
-typedef struct {
- unsigned int ehufco[256]; /* code for each symbol */
- char ehufsi[256]; /* length of code for each symbol */
- /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */
-} c_derived_tbl;
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jpeg_make_c_derived_tbl jMkCDerived
-#define jpeg_gen_optimal_table jGenOptTbl
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-/* Expand a Huffman table definition into the derived format */
-EXTERN(void) jpeg_make_c_derived_tbl
- JPP((j_compress_ptr cinfo, boolean isDC, int tblno,
- c_derived_tbl ** pdtbl));
-
-/* Generate an optimal table definition given the specified counts */
-EXTERN(void) jpeg_gen_optimal_table
- JPP((j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[]));
diff --git a/libjpegtwrp/jcinit.c b/libjpegtwrp/jcinit.c
deleted file mode 100644
index 5efffe331..000000000
--- a/libjpegtwrp/jcinit.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * jcinit.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains initialization logic for the JPEG compressor.
- * This routine is in charge of selecting the modules to be executed and
- * making an initialization call to each one.
- *
- * Logically, this code belongs in jcmaster.c. It's split out because
- * linking this routine implies linking the entire compression library.
- * For a transcoding-only application, we want to be able to use jcmaster.c
- * without linking in the whole library.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * Master selection of compression modules.
- * This is done once at the start of processing an image. We determine
- * which modules will be used and give them appropriate initialization calls.
- */
-
-GLOBAL(void)
-jinit_compress_master (j_compress_ptr cinfo)
-{
- /* Initialize master control (includes parameter checking/processing) */
- jinit_c_master_control(cinfo, FALSE /* full compression */);
-
- /* Preprocessing */
- if (! cinfo->raw_data_in) {
- jinit_color_converter(cinfo);
- jinit_downsampler(cinfo);
- jinit_c_prep_controller(cinfo, FALSE /* never need full buffer here */);
- }
- /* Forward DCT */
- jinit_forward_dct(cinfo);
- /* Entropy encoding: either Huffman or arithmetic coding. */
- if (cinfo->arith_code) {
- ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
- } else {
- if (cinfo->progressive_mode) {
-#ifdef C_PROGRESSIVE_SUPPORTED
- jinit_phuff_encoder(cinfo);
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
- } else
- jinit_huff_encoder(cinfo);
- }
-
- /* Need a full-image coefficient buffer in any multi-pass mode. */
- jinit_c_coef_controller(cinfo,
- (boolean) (cinfo->num_scans > 1 || cinfo->optimize_coding));
- jinit_c_main_controller(cinfo, FALSE /* never need full buffer here */);
-
- jinit_marker_writer(cinfo);
-
- /* We can now tell the memory manager to allocate virtual arrays. */
- (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
-
- /* Write the datastream header (SOI) immediately.
- * Frame and scan headers are postponed till later.
- * This lets application insert special markers after the SOI.
- */
- (*cinfo->marker->write_file_header) (cinfo);
-}
diff --git a/libjpegtwrp/jcmainct.c b/libjpegtwrp/jcmainct.c
deleted file mode 100644
index 5b7ff21dc..000000000
--- a/libjpegtwrp/jcmainct.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * jcmainct.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains the main buffer controller for compression.
- * The main buffer lies between the pre-processor and the JPEG
- * compressor proper; it holds downsampled data in the JPEG colorspace.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Note: currently, there is no operating mode in which a full-image buffer
- * is needed at this step. If there were, that mode could not be used with
- * "raw data" input, since this module is bypassed in that case. However,
- * we've left the code here for possible use in special applications.
- */
-#undef FULL_MAIN_BUFFER_SUPPORTED
-
-
-/* Private buffer controller object */
-
-typedef struct {
- struct jpeg_c_main_controller pub; /* public fields */
-
- JDIMENSION cur_iMCU_row; /* number of current iMCU row */
- JDIMENSION rowgroup_ctr; /* counts row groups received in iMCU row */
- boolean suspended; /* remember if we suspended output */
- J_BUF_MODE pass_mode; /* current operating mode */
-
- /* If using just a strip buffer, this points to the entire set of buffers
- * (we allocate one for each component). In the full-image case, this
- * points to the currently accessible strips of the virtual arrays.
- */
- JSAMPARRAY buffer[MAX_COMPONENTS];
-
-#ifdef FULL_MAIN_BUFFER_SUPPORTED
- /* If using full-image storage, this array holds pointers to virtual-array
- * control blocks for each component. Unused if not full-image storage.
- */
- jvirt_sarray_ptr whole_image[MAX_COMPONENTS];
-#endif
-} my_main_controller;
-
-typedef my_main_controller * my_main_ptr;
-
-
-/* Forward declarations */
-METHODDEF(void) process_data_simple_main
- JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf,
- JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail));
-#ifdef FULL_MAIN_BUFFER_SUPPORTED
-METHODDEF(void) process_data_buffer_main
- JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf,
- JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail));
-#endif
-
-
-/*
- * Initialize for a processing pass.
- */
-
-METHODDEF(void)
-start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
-{
- my_main_ptr main_ptr = (my_main_ptr) cinfo->main;
-
- /* Do nothing in raw-data mode. */
- if (cinfo->raw_data_in)
- return;
-
- main_ptr->cur_iMCU_row = 0; /* initialize counters */
- main_ptr->rowgroup_ctr = 0;
- main_ptr->suspended = FALSE;
- main_ptr->pass_mode = pass_mode; /* save mode for use by process_data */
-
- switch (pass_mode) {
- case JBUF_PASS_THRU:
-#ifdef FULL_MAIN_BUFFER_SUPPORTED
- if (main_ptr->whole_image[0] != NULL)
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-#endif
- main_ptr->pub.process_data = process_data_simple_main;
- break;
-#ifdef FULL_MAIN_BUFFER_SUPPORTED
- case JBUF_SAVE_SOURCE:
- case JBUF_CRANK_DEST:
- case JBUF_SAVE_AND_PASS:
- if (main_ptr->whole_image[0] == NULL)
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
- main_ptr->pub.process_data = process_data_buffer_main;
- break;
-#endif
- default:
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
- break;
- }
-}
-
-
-/*
- * Process some data.
- * This routine handles the simple pass-through mode,
- * where we have only a strip buffer.
- */
-
-METHODDEF(void)
-process_data_simple_main (j_compress_ptr cinfo,
- JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
- JDIMENSION in_rows_avail)
-{
- my_main_ptr main_ptr = (my_main_ptr) cinfo->main;
-
- while (main_ptr->cur_iMCU_row < cinfo->total_iMCU_rows) {
- /* Read input data if we haven't filled the main buffer yet */
- if (main_ptr->rowgroup_ctr < DCTSIZE)
- (*cinfo->prep->pre_process_data) (cinfo,
- input_buf, in_row_ctr, in_rows_avail,
- main_ptr->buffer, &main_ptr->rowgroup_ctr,
- (JDIMENSION) DCTSIZE);
-
- /* If we don't have a full iMCU row buffered, return to application for
- * more data. Note that preprocessor will always pad to fill the iMCU row
- * at the bottom of the image.
- */
- if (main_ptr->rowgroup_ctr != DCTSIZE)
- return;
-
- /* Send the completed row to the compressor */
- if (! (*cinfo->coef->compress_data) (cinfo, main_ptr->buffer)) {
- /* If compressor did not consume the whole row, then we must need to
- * suspend processing and return to the application. In this situation
- * we pretend we didn't yet consume the last input row; otherwise, if
- * it happened to be the last row of the image, the application would
- * think we were done.
- */
- if (! main_ptr->suspended) {
- (*in_row_ctr)--;
- main_ptr->suspended = TRUE;
- }
- return;
- }
- /* We did finish the row. Undo our little suspension hack if a previous
- * call suspended; then mark the main buffer empty.
- */
- if (main_ptr->suspended) {
- (*in_row_ctr)++;
- main_ptr->suspended = FALSE;
- }
- main_ptr->rowgroup_ctr = 0;
- main_ptr->cur_iMCU_row++;
- }
-}
-
-
-#ifdef FULL_MAIN_BUFFER_SUPPORTED
-
-/*
- * Process some data.
- * This routine handles all of the modes that use a full-size buffer.
- */
-
-METHODDEF(void)
-process_data_buffer_main (j_compress_ptr cinfo,
- JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
- JDIMENSION in_rows_avail)
-{
- my_main_ptr main_ptr = (my_main_ptr) cinfo->main;
- int ci;
- jpeg_component_info *compptr;
- boolean writing = (main_ptr->pass_mode != JBUF_CRANK_DEST);
-
- while (main_ptr->cur_iMCU_row < cinfo->total_iMCU_rows) {
- /* Realign the virtual buffers if at the start of an iMCU row. */
- if (main_ptr->rowgroup_ctr == 0) {
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- main_ptr->buffer[ci] = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, main_ptr->whole_image[ci],
- main_ptr->cur_iMCU_row * (compptr->v_samp_factor * DCTSIZE),
- (JDIMENSION) (compptr->v_samp_factor * DCTSIZE), writing);
- }
- /* In a read pass, pretend we just read some source data. */
- if (! writing) {
- *in_row_ctr += cinfo->max_v_samp_factor * DCTSIZE;
- main_ptr->rowgroup_ctr = DCTSIZE;
- }
- }
-
- /* If a write pass, read input data until the current iMCU row is full. */
- /* Note: preprocessor will pad if necessary to fill the last iMCU row. */
- if (writing) {
- (*cinfo->prep->pre_process_data) (cinfo,
- input_buf, in_row_ctr, in_rows_avail,
- main_ptr->buffer, &main_ptr->rowgroup_ctr,
- (JDIMENSION) DCTSIZE);
- /* Return to application if we need more data to fill the iMCU row. */
- if (main_ptr->rowgroup_ctr < DCTSIZE)
- return;
- }
-
- /* Emit data, unless this is a sink-only pass. */
- if (main_ptr->pass_mode != JBUF_SAVE_SOURCE) {
- if (! (*cinfo->coef->compress_data) (cinfo, main_ptr->buffer)) {
- /* If compressor did not consume the whole row, then we must need to
- * suspend processing and return to the application. In this situation
- * we pretend we didn't yet consume the last input row; otherwise, if
- * it happened to be the last row of the image, the application would
- * think we were done.
- */
- if (! main_ptr->suspended) {
- (*in_row_ctr)--;
- main_ptr->suspended = TRUE;
- }
- return;
- }
- /* We did finish the row. Undo our little suspension hack if a previous
- * call suspended; then mark the main buffer empty.
- */
- if (main_ptr->suspended) {
- (*in_row_ctr)++;
- main_ptr->suspended = FALSE;
- }
- }
-
- /* If get here, we are done with this iMCU row. Mark buffer empty. */
- main_ptr->rowgroup_ctr = 0;
- main_ptr->cur_iMCU_row++;
- }
-}
-
-#endif /* FULL_MAIN_BUFFER_SUPPORTED */
-
-
-/*
- * Initialize main buffer controller.
- */
-
-GLOBAL(void)
-jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer)
-{
- my_main_ptr main_ptr;
- int ci;
- jpeg_component_info *compptr;
-
- main_ptr = (my_main_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_main_controller));
- cinfo->main = (struct jpeg_c_main_controller *) main_ptr;
- main_ptr->pub.start_pass = start_pass_main;
-
- /* We don't need to create a buffer in raw-data mode. */
- if (cinfo->raw_data_in)
- return;
-
- /* Create the buffer. It holds downsampled data, so each component
- * may be of a different size.
- */
- if (need_full_buffer) {
-#ifdef FULL_MAIN_BUFFER_SUPPORTED
- /* Allocate a full-image virtual array for each component */
- /* Note we pad the bottom to a multiple of the iMCU height */
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- main_ptr->whole_image[ci] = (*cinfo->mem->request_virt_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
- compptr->width_in_blocks * DCTSIZE,
- (JDIMENSION) jround_up((long) compptr->height_in_blocks,
- (long) compptr->v_samp_factor) * DCTSIZE,
- (JDIMENSION) (compptr->v_samp_factor * DCTSIZE));
- }
-#else
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-#endif
- } else {
-#ifdef FULL_MAIN_BUFFER_SUPPORTED
- main_ptr->whole_image[0] = NULL; /* flag for no virtual arrays */
-#endif
- /* Allocate a strip buffer for each component */
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- main_ptr->buffer[ci] = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- compptr->width_in_blocks * DCTSIZE,
- (JDIMENSION) (compptr->v_samp_factor * DCTSIZE));
- }
- }
-}
diff --git a/libjpegtwrp/jcmarker.c b/libjpegtwrp/jcmarker.c
deleted file mode 100644
index 3d1e6c6d5..000000000
--- a/libjpegtwrp/jcmarker.c
+++ /dev/null
@@ -1,664 +0,0 @@
-/*
- * jcmarker.c
- *
- * Copyright (C) 1991-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to write JPEG datastream markers.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-typedef enum { /* JPEG marker codes */
- M_SOF0 = 0xc0,
- M_SOF1 = 0xc1,
- M_SOF2 = 0xc2,
- M_SOF3 = 0xc3,
-
- M_SOF5 = 0xc5,
- M_SOF6 = 0xc6,
- M_SOF7 = 0xc7,
-
- M_JPG = 0xc8,
- M_SOF9 = 0xc9,
- M_SOF10 = 0xca,
- M_SOF11 = 0xcb,
-
- M_SOF13 = 0xcd,
- M_SOF14 = 0xce,
- M_SOF15 = 0xcf,
-
- M_DHT = 0xc4,
-
- M_DAC = 0xcc,
-
- M_RST0 = 0xd0,
- M_RST1 = 0xd1,
- M_RST2 = 0xd2,
- M_RST3 = 0xd3,
- M_RST4 = 0xd4,
- M_RST5 = 0xd5,
- M_RST6 = 0xd6,
- M_RST7 = 0xd7,
-
- M_SOI = 0xd8,
- M_EOI = 0xd9,
- M_SOS = 0xda,
- M_DQT = 0xdb,
- M_DNL = 0xdc,
- M_DRI = 0xdd,
- M_DHP = 0xde,
- M_EXP = 0xdf,
-
- M_APP0 = 0xe0,
- M_APP1 = 0xe1,
- M_APP2 = 0xe2,
- M_APP3 = 0xe3,
- M_APP4 = 0xe4,
- M_APP5 = 0xe5,
- M_APP6 = 0xe6,
- M_APP7 = 0xe7,
- M_APP8 = 0xe8,
- M_APP9 = 0xe9,
- M_APP10 = 0xea,
- M_APP11 = 0xeb,
- M_APP12 = 0xec,
- M_APP13 = 0xed,
- M_APP14 = 0xee,
- M_APP15 = 0xef,
-
- M_JPG0 = 0xf0,
- M_JPG13 = 0xfd,
- M_COM = 0xfe,
-
- M_TEM = 0x01,
-
- M_ERROR = 0x100
-} JPEG_MARKER;
-
-
-/* Private state */
-
-typedef struct {
- struct jpeg_marker_writer pub; /* public fields */
-
- unsigned int last_restart_interval; /* last DRI value emitted; 0 after SOI */
-} my_marker_writer;
-
-typedef my_marker_writer * my_marker_ptr;
-
-
-/*
- * Basic output routines.
- *
- * Note that we do not support suspension while writing a marker.
- * Therefore, an application using suspension must ensure that there is
- * enough buffer space for the initial markers (typ. 600-700 bytes) before
- * calling jpeg_start_compress, and enough space to write the trailing EOI
- * (a few bytes) before calling jpeg_finish_compress. Multipass compression
- * modes are not supported at all with suspension, so those two are the only
- * points where markers will be written.
- */
-
-LOCAL(void)
-emit_byte (j_compress_ptr cinfo, int val)
-/* Emit a byte */
-{
- struct jpeg_destination_mgr * dest = cinfo->dest;
-
- *(dest->next_output_byte)++ = (JOCTET) val;
- if (--dest->free_in_buffer == 0) {
- if (! (*dest->empty_output_buffer) (cinfo))
- ERREXIT(cinfo, JERR_CANT_SUSPEND);
- }
-}
-
-
-LOCAL(void)
-emit_marker (j_compress_ptr cinfo, JPEG_MARKER mark)
-/* Emit a marker code */
-{
- emit_byte(cinfo, 0xFF);
- emit_byte(cinfo, (int) mark);
-}
-
-
-LOCAL(void)
-emit_2bytes (j_compress_ptr cinfo, int value)
-/* Emit a 2-byte integer; these are always MSB first in JPEG files */
-{
- emit_byte(cinfo, (value >> 8) & 0xFF);
- emit_byte(cinfo, value & 0xFF);
-}
-
-
-/*
- * Routines to write specific marker types.
- */
-
-LOCAL(int)
-emit_dqt (j_compress_ptr cinfo, int index)
-/* Emit a DQT marker */
-/* Returns the precision used (0 = 8bits, 1 = 16bits) for baseline checking */
-{
- JQUANT_TBL * qtbl = cinfo->quant_tbl_ptrs[index];
- int prec;
- int i;
-
- if (qtbl == NULL)
- ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, index);
-
- prec = 0;
- for (i = 0; i < DCTSIZE2; i++) {
- if (qtbl->quantval[i] > 255)
- prec = 1;
- }
-
- if (! qtbl->sent_table) {
- emit_marker(cinfo, M_DQT);
-
- emit_2bytes(cinfo, prec ? DCTSIZE2*2 + 1 + 2 : DCTSIZE2 + 1 + 2);
-
- emit_byte(cinfo, index + (prec<<4));
-
- for (i = 0; i < DCTSIZE2; i++) {
- /* The table entries must be emitted in zigzag order. */
- unsigned int qval = qtbl->quantval[jpeg_natural_order[i]];
- if (prec)
- emit_byte(cinfo, (int) (qval >> 8));
- emit_byte(cinfo, (int) (qval & 0xFF));
- }
-
- qtbl->sent_table = TRUE;
- }
-
- return prec;
-}
-
-
-LOCAL(void)
-emit_dht (j_compress_ptr cinfo, int index, boolean is_ac)
-/* Emit a DHT marker */
-{
- JHUFF_TBL * htbl;
- int length, i;
-
- if (is_ac) {
- htbl = cinfo->ac_huff_tbl_ptrs[index];
- index += 0x10; /* output index has AC bit set */
- } else {
- htbl = cinfo->dc_huff_tbl_ptrs[index];
- }
-
- if (htbl == NULL)
- ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, index);
-
- if (! htbl->sent_table) {
- emit_marker(cinfo, M_DHT);
-
- length = 0;
- for (i = 1; i <= 16; i++)
- length += htbl->bits[i];
-
- emit_2bytes(cinfo, length + 2 + 1 + 16);
- emit_byte(cinfo, index);
-
- for (i = 1; i <= 16; i++)
- emit_byte(cinfo, htbl->bits[i]);
-
- for (i = 0; i < length; i++)
- emit_byte(cinfo, htbl->huffval[i]);
-
- htbl->sent_table = TRUE;
- }
-}
-
-
-LOCAL(void)
-emit_dac (j_compress_ptr cinfo)
-/* Emit a DAC marker */
-/* Since the useful info is so small, we want to emit all the tables in */
-/* one DAC marker. Therefore this routine does its own scan of the table. */
-{
-#ifdef C_ARITH_CODING_SUPPORTED
- char dc_in_use[NUM_ARITH_TBLS];
- char ac_in_use[NUM_ARITH_TBLS];
- int length, i;
- jpeg_component_info *compptr;
-
- for (i = 0; i < NUM_ARITH_TBLS; i++)
- dc_in_use[i] = ac_in_use[i] = 0;
-
- for (i = 0; i < cinfo->comps_in_scan; i++) {
- compptr = cinfo->cur_comp_info[i];
- dc_in_use[compptr->dc_tbl_no] = 1;
- ac_in_use[compptr->ac_tbl_no] = 1;
- }
-
- length = 0;
- for (i = 0; i < NUM_ARITH_TBLS; i++)
- length += dc_in_use[i] + ac_in_use[i];
-
- emit_marker(cinfo, M_DAC);
-
- emit_2bytes(cinfo, length*2 + 2);
-
- for (i = 0; i < NUM_ARITH_TBLS; i++) {
- if (dc_in_use[i]) {
- emit_byte(cinfo, i);
- emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4));
- }
- if (ac_in_use[i]) {
- emit_byte(cinfo, i + 0x10);
- emit_byte(cinfo, cinfo->arith_ac_K[i]);
- }
- }
-#endif /* C_ARITH_CODING_SUPPORTED */
-}
-
-
-LOCAL(void)
-emit_dri (j_compress_ptr cinfo)
-/* Emit a DRI marker */
-{
- emit_marker(cinfo, M_DRI);
-
- emit_2bytes(cinfo, 4); /* fixed length */
-
- emit_2bytes(cinfo, (int) cinfo->restart_interval);
-}
-
-
-LOCAL(void)
-emit_sof (j_compress_ptr cinfo, JPEG_MARKER code)
-/* Emit a SOF marker */
-{
- int ci;
- jpeg_component_info *compptr;
-
- emit_marker(cinfo, code);
-
- emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */
-
- /* Make sure image isn't bigger than SOF field can handle */
- if ((long) cinfo->image_height > 65535L ||
- (long) cinfo->image_width > 65535L)
- ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) 65535);
-
- emit_byte(cinfo, cinfo->data_precision);
- emit_2bytes(cinfo, (int) cinfo->image_height);
- emit_2bytes(cinfo, (int) cinfo->image_width);
-
- emit_byte(cinfo, cinfo->num_components);
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- emit_byte(cinfo, compptr->component_id);
- emit_byte(cinfo, (compptr->h_samp_factor << 4) + compptr->v_samp_factor);
- emit_byte(cinfo, compptr->quant_tbl_no);
- }
-}
-
-
-LOCAL(void)
-emit_sos (j_compress_ptr cinfo)
-/* Emit a SOS marker */
-{
- int i, td, ta;
- jpeg_component_info *compptr;
-
- emit_marker(cinfo, M_SOS);
-
- emit_2bytes(cinfo, 2 * cinfo->comps_in_scan + 2 + 1 + 3); /* length */
-
- emit_byte(cinfo, cinfo->comps_in_scan);
-
- for (i = 0; i < cinfo->comps_in_scan; i++) {
- compptr = cinfo->cur_comp_info[i];
- emit_byte(cinfo, compptr->component_id);
- td = compptr->dc_tbl_no;
- ta = compptr->ac_tbl_no;
- if (cinfo->progressive_mode) {
- /* Progressive mode: only DC or only AC tables are used in one scan;
- * furthermore, Huffman coding of DC refinement uses no table at all.
- * We emit 0 for unused field(s); this is recommended by the P&M text
- * but does not seem to be specified in the standard.
- */
- if (cinfo->Ss == 0) {
- ta = 0; /* DC scan */
- if (cinfo->Ah != 0 && !cinfo->arith_code)
- td = 0; /* no DC table either */
- } else {
- td = 0; /* AC scan */
- }
- }
- emit_byte(cinfo, (td << 4) + ta);
- }
-
- emit_byte(cinfo, cinfo->Ss);
- emit_byte(cinfo, cinfo->Se);
- emit_byte(cinfo, (cinfo->Ah << 4) + cinfo->Al);
-}
-
-
-LOCAL(void)
-emit_jfif_app0 (j_compress_ptr cinfo)
-/* Emit a JFIF-compliant APP0 marker */
-{
- /*
- * Length of APP0 block (2 bytes)
- * Block ID (4 bytes - ASCII "JFIF")
- * Zero byte (1 byte to terminate the ID string)
- * Version Major, Minor (2 bytes - major first)
- * Units (1 byte - 0x00 = none, 0x01 = inch, 0x02 = cm)
- * Xdpu (2 bytes - dots per unit horizontal)
- * Ydpu (2 bytes - dots per unit vertical)
- * Thumbnail X size (1 byte)
- * Thumbnail Y size (1 byte)
- */
-
- emit_marker(cinfo, M_APP0);
-
- emit_2bytes(cinfo, 2 + 4 + 1 + 2 + 1 + 2 + 2 + 1 + 1); /* length */
-
- emit_byte(cinfo, 0x4A); /* Identifier: ASCII "JFIF" */
- emit_byte(cinfo, 0x46);
- emit_byte(cinfo, 0x49);
- emit_byte(cinfo, 0x46);
- emit_byte(cinfo, 0);
- emit_byte(cinfo, cinfo->JFIF_major_version); /* Version fields */
- emit_byte(cinfo, cinfo->JFIF_minor_version);
- emit_byte(cinfo, cinfo->density_unit); /* Pixel size information */
- emit_2bytes(cinfo, (int) cinfo->X_density);
- emit_2bytes(cinfo, (int) cinfo->Y_density);
- emit_byte(cinfo, 0); /* No thumbnail image */
- emit_byte(cinfo, 0);
-}
-
-
-LOCAL(void)
-emit_adobe_app14 (j_compress_ptr cinfo)
-/* Emit an Adobe APP14 marker */
-{
- /*
- * Length of APP14 block (2 bytes)
- * Block ID (5 bytes - ASCII "Adobe")
- * Version Number (2 bytes - currently 100)
- * Flags0 (2 bytes - currently 0)
- * Flags1 (2 bytes - currently 0)
- * Color transform (1 byte)
- *
- * Although Adobe TN 5116 mentions Version = 101, all the Adobe files
- * now in circulation seem to use Version = 100, so that's what we write.
- *
- * We write the color transform byte as 1 if the JPEG color space is
- * YCbCr, 2 if it's YCCK, 0 otherwise. Adobe's definition has to do with
- * whether the encoder performed a transformation, which is pretty useless.
- */
-
- emit_marker(cinfo, M_APP14);
-
- emit_2bytes(cinfo, 2 + 5 + 2 + 2 + 2 + 1); /* length */
-
- emit_byte(cinfo, 0x41); /* Identifier: ASCII "Adobe" */
- emit_byte(cinfo, 0x64);
- emit_byte(cinfo, 0x6F);
- emit_byte(cinfo, 0x62);
- emit_byte(cinfo, 0x65);
- emit_2bytes(cinfo, 100); /* Version */
- emit_2bytes(cinfo, 0); /* Flags0 */
- emit_2bytes(cinfo, 0); /* Flags1 */
- switch (cinfo->jpeg_color_space) {
- case JCS_YCbCr:
- emit_byte(cinfo, 1); /* Color transform = 1 */
- break;
- case JCS_YCCK:
- emit_byte(cinfo, 2); /* Color transform = 2 */
- break;
- default:
- emit_byte(cinfo, 0); /* Color transform = 0 */
- break;
- }
-}
-
-
-/*
- * These routines allow writing an arbitrary marker with parameters.
- * The only intended use is to emit COM or APPn markers after calling
- * write_file_header and before calling write_frame_header.
- * Other uses are not guaranteed to produce desirable results.
- * Counting the parameter bytes properly is the caller's responsibility.
- */
-
-METHODDEF(void)
-write_marker_header (j_compress_ptr cinfo, int marker, unsigned int datalen)
-/* Emit an arbitrary marker header */
-{
- if (datalen > (unsigned int) 65533) /* safety check */
- ERREXIT(cinfo, JERR_BAD_LENGTH);
-
- emit_marker(cinfo, (JPEG_MARKER) marker);
-
- emit_2bytes(cinfo, (int) (datalen + 2)); /* total length */
-}
-
-METHODDEF(void)
-write_marker_byte (j_compress_ptr cinfo, int val)
-/* Emit one byte of marker parameters following write_marker_header */
-{
- emit_byte(cinfo, val);
-}
-
-
-/*
- * Write datastream header.
- * This consists of an SOI and optional APPn markers.
- * We recommend use of the JFIF marker, but not the Adobe marker,
- * when using YCbCr or grayscale data. The JFIF marker should NOT
- * be used for any other JPEG colorspace. The Adobe marker is helpful
- * to distinguish RGB, CMYK, and YCCK colorspaces.
- * Note that an application can write additional header markers after
- * jpeg_start_compress returns.
- */
-
-METHODDEF(void)
-write_file_header (j_compress_ptr cinfo)
-{
- my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
-
- emit_marker(cinfo, M_SOI); /* first the SOI */
-
- /* SOI is defined to reset restart interval to 0 */
- marker->last_restart_interval = 0;
-
- if (cinfo->write_JFIF_header) /* next an optional JFIF APP0 */
- emit_jfif_app0(cinfo);
- if (cinfo->write_Adobe_marker) /* next an optional Adobe APP14 */
- emit_adobe_app14(cinfo);
-}
-
-
-/*
- * Write frame header.
- * This consists of DQT and SOFn markers.
- * Note that we do not emit the SOF until we have emitted the DQT(s).
- * This avoids compatibility problems with incorrect implementations that
- * try to error-check the quant table numbers as soon as they see the SOF.
- */
-
-METHODDEF(void)
-write_frame_header (j_compress_ptr cinfo)
-{
- int ci, prec;
- boolean is_baseline;
- jpeg_component_info *compptr;
-
- /* Emit DQT for each quantization table.
- * Note that emit_dqt() suppresses any duplicate tables.
- */
- prec = 0;
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- prec += emit_dqt(cinfo, compptr->quant_tbl_no);
- }
- /* now prec is nonzero iff there are any 16-bit quant tables. */
-
- /* Check for a non-baseline specification.
- * Note we assume that Huffman table numbers won't be changed later.
- */
- if (cinfo->arith_code || cinfo->progressive_mode ||
- cinfo->data_precision != 8) {
- is_baseline = FALSE;
- } else {
- is_baseline = TRUE;
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- if (compptr->dc_tbl_no > 1 || compptr->ac_tbl_no > 1)
- is_baseline = FALSE;
- }
- if (prec && is_baseline) {
- is_baseline = FALSE;
- /* If it's baseline except for quantizer size, warn the user */
- TRACEMS(cinfo, 0, JTRC_16BIT_TABLES);
- }
- }
-
- /* Emit the proper SOF marker */
- if (cinfo->arith_code) {
- emit_sof(cinfo, M_SOF9); /* SOF code for arithmetic coding */
- } else {
- if (cinfo->progressive_mode)
- emit_sof(cinfo, M_SOF2); /* SOF code for progressive Huffman */
- else if (is_baseline)
- emit_sof(cinfo, M_SOF0); /* SOF code for baseline implementation */
- else
- emit_sof(cinfo, M_SOF1); /* SOF code for non-baseline Huffman file */
- }
-}
-
-
-/*
- * Write scan header.
- * This consists of DHT or DAC markers, optional DRI, and SOS.
- * Compressed data will be written following the SOS.
- */
-
-METHODDEF(void)
-write_scan_header (j_compress_ptr cinfo)
-{
- my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
- int i;
- jpeg_component_info *compptr;
-
- if (cinfo->arith_code) {
- /* Emit arith conditioning info. We may have some duplication
- * if the file has multiple scans, but it's so small it's hardly
- * worth worrying about.
- */
- emit_dac(cinfo);
- } else {
- /* Emit Huffman tables.
- * Note that emit_dht() suppresses any duplicate tables.
- */
- for (i = 0; i < cinfo->comps_in_scan; i++) {
- compptr = cinfo->cur_comp_info[i];
- if (cinfo->progressive_mode) {
- /* Progressive mode: only DC or only AC tables are used in one scan */
- if (cinfo->Ss == 0) {
- if (cinfo->Ah == 0) /* DC needs no table for refinement scan */
- emit_dht(cinfo, compptr->dc_tbl_no, FALSE);
- } else {
- emit_dht(cinfo, compptr->ac_tbl_no, TRUE);
- }
- } else {
- /* Sequential mode: need both DC and AC tables */
- emit_dht(cinfo, compptr->dc_tbl_no, FALSE);
- emit_dht(cinfo, compptr->ac_tbl_no, TRUE);
- }
- }
- }
-
- /* Emit DRI if required --- note that DRI value could change for each scan.
- * We avoid wasting space with unnecessary DRIs, however.
- */
- if (cinfo->restart_interval != marker->last_restart_interval) {
- emit_dri(cinfo);
- marker->last_restart_interval = cinfo->restart_interval;
- }
-
- emit_sos(cinfo);
-}
-
-
-/*
- * Write datastream trailer.
- */
-
-METHODDEF(void)
-write_file_trailer (j_compress_ptr cinfo)
-{
- emit_marker(cinfo, M_EOI);
-}
-
-
-/*
- * Write an abbreviated table-specification datastream.
- * This consists of SOI, DQT and DHT tables, and EOI.
- * Any table that is defined and not marked sent_table = TRUE will be
- * emitted. Note that all tables will be marked sent_table = TRUE at exit.
- */
-
-METHODDEF(void)
-write_tables_only (j_compress_ptr cinfo)
-{
- int i;
-
- emit_marker(cinfo, M_SOI);
-
- for (i = 0; i < NUM_QUANT_TBLS; i++) {
- if (cinfo->quant_tbl_ptrs[i] != NULL)
- (void) emit_dqt(cinfo, i);
- }
-
- if (! cinfo->arith_code) {
- for (i = 0; i < NUM_HUFF_TBLS; i++) {
- if (cinfo->dc_huff_tbl_ptrs[i] != NULL)
- emit_dht(cinfo, i, FALSE);
- if (cinfo->ac_huff_tbl_ptrs[i] != NULL)
- emit_dht(cinfo, i, TRUE);
- }
- }
-
- emit_marker(cinfo, M_EOI);
-}
-
-
-/*
- * Initialize the marker writer module.
- */
-
-GLOBAL(void)
-jinit_marker_writer (j_compress_ptr cinfo)
-{
- my_marker_ptr marker;
-
- /* Create the subobject */
- marker = (my_marker_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_marker_writer));
- cinfo->marker = (struct jpeg_marker_writer *) marker;
- /* Initialize method pointers */
- marker->pub.write_file_header = write_file_header;
- marker->pub.write_frame_header = write_frame_header;
- marker->pub.write_scan_header = write_scan_header;
- marker->pub.write_file_trailer = write_file_trailer;
- marker->pub.write_tables_only = write_tables_only;
- marker->pub.write_marker_header = write_marker_header;
- marker->pub.write_marker_byte = write_marker_byte;
- /* Initialize private state */
- marker->last_restart_interval = 0;
-}
diff --git a/libjpegtwrp/jcmaster.c b/libjpegtwrp/jcmaster.c
deleted file mode 100644
index aab4020b8..000000000
--- a/libjpegtwrp/jcmaster.c
+++ /dev/null
@@ -1,590 +0,0 @@
-/*
- * jcmaster.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains master control logic for the JPEG compressor.
- * These routines are concerned with parameter validation, initial setup,
- * and inter-pass control (determining the number of passes and the work
- * to be done in each pass).
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Private state */
-
-typedef enum {
- main_pass, /* input data, also do first output step */
- huff_opt_pass, /* Huffman code optimization pass */
- output_pass /* data output pass */
-} c_pass_type;
-
-typedef struct {
- struct jpeg_comp_master pub; /* public fields */
-
- c_pass_type pass_type; /* the type of the current pass */
-
- int pass_number; /* # of passes completed */
- int total_passes; /* total # of passes needed */
-
- int scan_number; /* current index in scan_info[] */
-} my_comp_master;
-
-typedef my_comp_master * my_master_ptr;
-
-
-/*
- * Support routines that do various essential calculations.
- */
-
-LOCAL(void)
-initial_setup (j_compress_ptr cinfo)
-/* Do computations that are needed before master selection phase */
-{
- int ci;
- jpeg_component_info *compptr;
- long samplesperrow;
- JDIMENSION jd_samplesperrow;
-
- /* Sanity check on image dimensions */
- if (cinfo->image_height <= 0 || cinfo->image_width <= 0
- || cinfo->num_components <= 0 || cinfo->input_components <= 0)
- ERREXIT(cinfo, JERR_EMPTY_IMAGE);
-
- /* Make sure image isn't bigger than I can handle */
- if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION ||
- (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION)
- ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
-
- /* Width of an input scanline must be representable as JDIMENSION. */
- samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components;
- jd_samplesperrow = (JDIMENSION) samplesperrow;
- if ((long) jd_samplesperrow != samplesperrow)
- ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
-
- /* For now, precision must match compiled-in value... */
- if (cinfo->data_precision != BITS_IN_JSAMPLE)
- ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
-
- /* Check that number of components won't exceed internal array sizes */
- if (cinfo->num_components > MAX_COMPONENTS)
- ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
- MAX_COMPONENTS);
-
- /* Compute maximum sampling factors; check factor validity */
- cinfo->max_h_samp_factor = 1;
- cinfo->max_v_samp_factor = 1;
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR ||
- compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR)
- ERREXIT(cinfo, JERR_BAD_SAMPLING);
- cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor,
- compptr->h_samp_factor);
- cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor,
- compptr->v_samp_factor);
- }
-
- /* Compute dimensions of components */
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- /* Fill in the correct component_index value; don't rely on application */
- compptr->component_index = ci;
- /* For compression, we never do DCT scaling. */
- compptr->DCT_scaled_size = DCTSIZE;
- /* Size in DCT blocks */
- compptr->width_in_blocks = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
- (long) (cinfo->max_h_samp_factor * DCTSIZE));
- compptr->height_in_blocks = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
- (long) (cinfo->max_v_samp_factor * DCTSIZE));
- /* Size in samples */
- compptr->downsampled_width = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
- (long) cinfo->max_h_samp_factor);
- compptr->downsampled_height = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
- (long) cinfo->max_v_samp_factor);
- /* Mark component needed (this flag isn't actually used for compression) */
- compptr->component_needed = TRUE;
- }
-
- /* Compute number of fully interleaved MCU rows (number of times that
- * main controller will call coefficient controller).
- */
- cinfo->total_iMCU_rows = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height,
- (long) (cinfo->max_v_samp_factor*DCTSIZE));
-}
-
-
-#ifdef C_MULTISCAN_FILES_SUPPORTED
-
-LOCAL(void)
-validate_script (j_compress_ptr cinfo)
-/* Verify that the scan script in cinfo->scan_info[] is valid; also
- * determine whether it uses progressive JPEG, and set cinfo->progressive_mode.
- */
-{
- const jpeg_scan_info * scanptr;
- int scanno, ncomps, ci, coefi, thisi;
- int Ss, Se, Ah, Al;
- boolean component_sent[MAX_COMPONENTS];
-#ifdef C_PROGRESSIVE_SUPPORTED
- int * last_bitpos_ptr;
- int last_bitpos[MAX_COMPONENTS][DCTSIZE2];
- /* -1 until that coefficient has been seen; then last Al for it */
-#endif
-
- if (cinfo->num_scans <= 0)
- ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, 0);
-
- /* For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1;
- * for progressive JPEG, no scan can have this.
- */
- scanptr = cinfo->scan_info;
- if (scanptr->Ss != 0 || scanptr->Se != DCTSIZE2-1) {
-#ifdef C_PROGRESSIVE_SUPPORTED
- cinfo->progressive_mode = TRUE;
- last_bitpos_ptr = & last_bitpos[0][0];
- for (ci = 0; ci < cinfo->num_components; ci++)
- for (coefi = 0; coefi < DCTSIZE2; coefi++)
- *last_bitpos_ptr++ = -1;
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
- } else {
- cinfo->progressive_mode = FALSE;
- for (ci = 0; ci < cinfo->num_components; ci++)
- component_sent[ci] = FALSE;
- }
-
- for (scanno = 1; scanno <= cinfo->num_scans; scanptr++, scanno++) {
- /* Validate component indexes */
- ncomps = scanptr->comps_in_scan;
- if (ncomps <= 0 || ncomps > MAX_COMPS_IN_SCAN)
- ERREXIT2(cinfo, JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN);
- for (ci = 0; ci < ncomps; ci++) {
- thisi = scanptr->component_index[ci];
- if (thisi < 0 || thisi >= cinfo->num_components)
- ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
- /* Components must appear in SOF order within each scan */
- if (ci > 0 && thisi <= scanptr->component_index[ci-1])
- ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
- }
- /* Validate progression parameters */
- Ss = scanptr->Ss;
- Se = scanptr->Se;
- Ah = scanptr->Ah;
- Al = scanptr->Al;
- if (cinfo->progressive_mode) {
-#ifdef C_PROGRESSIVE_SUPPORTED
- /* The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that
- * seems wrong: the upper bound ought to depend on data precision.
- * Perhaps they really meant 0..N+1 for N-bit precision.
- * Here we allow 0..10 for 8-bit data; Al larger than 10 results in
- * out-of-range reconstructed DC values during the first DC scan,
- * which might cause problems for some decoders.
- */
-#if BITS_IN_JSAMPLE == 8
-#define MAX_AH_AL 10
-#else
-#define MAX_AH_AL 13
-#endif
- if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 ||
- Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL)
- ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
- if (Ss == 0) {
- if (Se != 0) /* DC and AC together not OK */
- ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
- } else {
- if (ncomps != 1) /* AC scans must be for only one component */
- ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
- }
- for (ci = 0; ci < ncomps; ci++) {
- last_bitpos_ptr = & last_bitpos[scanptr->component_index[ci]][0];
- if (Ss != 0 && last_bitpos_ptr[0] < 0) /* AC without prior DC scan */
- ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
- for (coefi = Ss; coefi <= Se; coefi++) {
- if (last_bitpos_ptr[coefi] < 0) {
- /* first scan of this coefficient */
- if (Ah != 0)
- ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
- } else {
- /* not first scan */
- if (Ah != last_bitpos_ptr[coefi] || Al != Ah-1)
- ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
- }
- last_bitpos_ptr[coefi] = Al;
- }
- }
-#endif
- } else {
- /* For sequential JPEG, all progression parameters must be these: */
- if (Ss != 0 || Se != DCTSIZE2-1 || Ah != 0 || Al != 0)
- ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
- /* Make sure components are not sent twice */
- for (ci = 0; ci < ncomps; ci++) {
- thisi = scanptr->component_index[ci];
- if (component_sent[thisi])
- ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
- component_sent[thisi] = TRUE;
- }
- }
- }
-
- /* Now verify that everything got sent. */
- if (cinfo->progressive_mode) {
-#ifdef C_PROGRESSIVE_SUPPORTED
- /* For progressive mode, we only check that at least some DC data
- * got sent for each component; the spec does not require that all bits
- * of all coefficients be transmitted. Would it be wiser to enforce
- * transmission of all coefficient bits??
- */
- for (ci = 0; ci < cinfo->num_components; ci++) {
- if (last_bitpos[ci][0] < 0)
- ERREXIT(cinfo, JERR_MISSING_DATA);
- }
-#endif
- } else {
- for (ci = 0; ci < cinfo->num_components; ci++) {
- if (! component_sent[ci])
- ERREXIT(cinfo, JERR_MISSING_DATA);
- }
- }
-}
-
-#endif /* C_MULTISCAN_FILES_SUPPORTED */
-
-
-LOCAL(void)
-select_scan_parameters (j_compress_ptr cinfo)
-/* Set up the scan parameters for the current scan */
-{
- int ci;
-
-#ifdef C_MULTISCAN_FILES_SUPPORTED
- if (cinfo->scan_info != NULL) {
- /* Prepare for current scan --- the script is already validated */
- my_master_ptr master = (my_master_ptr) cinfo->master;
- const jpeg_scan_info * scanptr = cinfo->scan_info + master->scan_number;
-
- cinfo->comps_in_scan = scanptr->comps_in_scan;
- for (ci = 0; ci < scanptr->comps_in_scan; ci++) {
- cinfo->cur_comp_info[ci] =
- &cinfo->comp_info[scanptr->component_index[ci]];
- }
- cinfo->Ss = scanptr->Ss;
- cinfo->Se = scanptr->Se;
- cinfo->Ah = scanptr->Ah;
- cinfo->Al = scanptr->Al;
- }
- else
-#endif
- {
- /* Prepare for single sequential-JPEG scan containing all components */
- if (cinfo->num_components > MAX_COMPS_IN_SCAN)
- ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
- MAX_COMPS_IN_SCAN);
- cinfo->comps_in_scan = cinfo->num_components;
- for (ci = 0; ci < cinfo->num_components; ci++) {
- cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci];
- }
- cinfo->Ss = 0;
- cinfo->Se = DCTSIZE2-1;
- cinfo->Ah = 0;
- cinfo->Al = 0;
- }
-}
-
-
-LOCAL(void)
-per_scan_setup (j_compress_ptr cinfo)
-/* Do computations that are needed before processing a JPEG scan */
-/* cinfo->comps_in_scan and cinfo->cur_comp_info[] are already set */
-{
- int ci, mcublks, tmp;
- jpeg_component_info *compptr;
-
- if (cinfo->comps_in_scan == 1) {
-
- /* Noninterleaved (single-component) scan */
- compptr = cinfo->cur_comp_info[0];
-
- /* Overall image size in MCUs */
- cinfo->MCUs_per_row = compptr->width_in_blocks;
- cinfo->MCU_rows_in_scan = compptr->height_in_blocks;
-
- /* For noninterleaved scan, always one block per MCU */
- compptr->MCU_width = 1;
- compptr->MCU_height = 1;
- compptr->MCU_blocks = 1;
- compptr->MCU_sample_width = DCTSIZE;
- compptr->last_col_width = 1;
- /* For noninterleaved scans, it is convenient to define last_row_height
- * as the number of block rows present in the last iMCU row.
- */
- tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
- if (tmp == 0) tmp = compptr->v_samp_factor;
- compptr->last_row_height = tmp;
-
- /* Prepare array describing MCU composition */
- cinfo->blocks_in_MCU = 1;
- cinfo->MCU_membership[0] = 0;
-
- } else {
-
- /* Interleaved (multi-component) scan */
- if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN)
- ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan,
- MAX_COMPS_IN_SCAN);
-
- /* Overall image size in MCUs */
- cinfo->MCUs_per_row = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_width,
- (long) (cinfo->max_h_samp_factor*DCTSIZE));
- cinfo->MCU_rows_in_scan = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height,
- (long) (cinfo->max_v_samp_factor*DCTSIZE));
-
- cinfo->blocks_in_MCU = 0;
-
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- /* Sampling factors give # of blocks of component in each MCU */
- compptr->MCU_width = compptr->h_samp_factor;
- compptr->MCU_height = compptr->v_samp_factor;
- compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
- compptr->MCU_sample_width = compptr->MCU_width * DCTSIZE;
- /* Figure number of non-dummy blocks in last MCU column & row */
- tmp = (int) (compptr->width_in_blocks % compptr->MCU_width);
- if (tmp == 0) tmp = compptr->MCU_width;
- compptr->last_col_width = tmp;
- tmp = (int) (compptr->height_in_blocks % compptr->MCU_height);
- if (tmp == 0) tmp = compptr->MCU_height;
- compptr->last_row_height = tmp;
- /* Prepare array describing MCU composition */
- mcublks = compptr->MCU_blocks;
- if (cinfo->blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU)
- ERREXIT(cinfo, JERR_BAD_MCU_SIZE);
- while (mcublks-- > 0) {
- cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci;
- }
- }
-
- }
-
- /* Convert restart specified in rows to actual MCU count. */
- /* Note that count must fit in 16 bits, so we provide limiting. */
- if (cinfo->restart_in_rows > 0) {
- long nominal = (long) cinfo->restart_in_rows * (long) cinfo->MCUs_per_row;
- cinfo->restart_interval = (unsigned int) MIN(nominal, 65535L);
- }
-}
-
-
-/*
- * Per-pass setup.
- * This is called at the beginning of each pass. We determine which modules
- * will be active during this pass and give them appropriate start_pass calls.
- * We also set is_last_pass to indicate whether any more passes will be
- * required.
- */
-
-METHODDEF(void)
-prepare_for_pass (j_compress_ptr cinfo)
-{
- my_master_ptr master = (my_master_ptr) cinfo->master;
-
- switch (master->pass_type) {
- case main_pass:
- /* Initial pass: will collect input data, and do either Huffman
- * optimization or data output for the first scan.
- */
- select_scan_parameters(cinfo);
- per_scan_setup(cinfo);
- if (! cinfo->raw_data_in) {
- (*cinfo->cconvert->start_pass) (cinfo);
- (*cinfo->downsample->start_pass) (cinfo);
- (*cinfo->prep->start_pass) (cinfo, JBUF_PASS_THRU);
- }
- (*cinfo->fdct->start_pass) (cinfo);
- (*cinfo->entropy->start_pass) (cinfo, cinfo->optimize_coding);
- (*cinfo->coef->start_pass) (cinfo,
- (master->total_passes > 1 ?
- JBUF_SAVE_AND_PASS : JBUF_PASS_THRU));
- (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU);
- if (cinfo->optimize_coding) {
- /* No immediate data output; postpone writing frame/scan headers */
- master->pub.call_pass_startup = FALSE;
- } else {
- /* Will write frame/scan headers at first jpeg_write_scanlines call */
- master->pub.call_pass_startup = TRUE;
- }
- break;
-#ifdef ENTROPY_OPT_SUPPORTED
- case huff_opt_pass:
- /* Do Huffman optimization for a scan after the first one. */
- select_scan_parameters(cinfo);
- per_scan_setup(cinfo);
- if (cinfo->Ss != 0 || cinfo->Ah == 0 || cinfo->arith_code) {
- (*cinfo->entropy->start_pass) (cinfo, TRUE);
- (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST);
- master->pub.call_pass_startup = FALSE;
- break;
- }
- /* Special case: Huffman DC refinement scans need no Huffman table
- * and therefore we can skip the optimization pass for them.
- */
- master->pass_type = output_pass;
- master->pass_number++;
- /*FALLTHROUGH*/
-#endif
- case output_pass:
- /* Do a data-output pass. */
- /* We need not repeat per-scan setup if prior optimization pass did it. */
- if (! cinfo->optimize_coding) {
- select_scan_parameters(cinfo);
- per_scan_setup(cinfo);
- }
- (*cinfo->entropy->start_pass) (cinfo, FALSE);
- (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST);
- /* We emit frame/scan headers now */
- if (master->scan_number == 0)
- (*cinfo->marker->write_frame_header) (cinfo);
- (*cinfo->marker->write_scan_header) (cinfo);
- master->pub.call_pass_startup = FALSE;
- break;
- default:
- ERREXIT(cinfo, JERR_NOT_COMPILED);
- }
-
- master->pub.is_last_pass = (master->pass_number == master->total_passes-1);
-
- /* Set up progress monitor's pass info if present */
- if (cinfo->progress != NULL) {
- cinfo->progress->completed_passes = master->pass_number;
- cinfo->progress->total_passes = master->total_passes;
- }
-}
-
-
-/*
- * Special start-of-pass hook.
- * This is called by jpeg_write_scanlines if call_pass_startup is TRUE.
- * In single-pass processing, we need this hook because we don't want to
- * write frame/scan headers during jpeg_start_compress; we want to let the
- * application write COM markers etc. between jpeg_start_compress and the
- * jpeg_write_scanlines loop.
- * In multi-pass processing, this routine is not used.
- */
-
-METHODDEF(void)
-pass_startup (j_compress_ptr cinfo)
-{
- cinfo->master->call_pass_startup = FALSE; /* reset flag so call only once */
-
- (*cinfo->marker->write_frame_header) (cinfo);
- (*cinfo->marker->write_scan_header) (cinfo);
-}
-
-
-/*
- * Finish up at end of pass.
- */
-
-METHODDEF(void)
-finish_pass_master (j_compress_ptr cinfo)
-{
- my_master_ptr master = (my_master_ptr) cinfo->master;
-
- /* The entropy coder always needs an end-of-pass call,
- * either to analyze statistics or to flush its output buffer.
- */
- (*cinfo->entropy->finish_pass) (cinfo);
-
- /* Update state for next pass */
- switch (master->pass_type) {
- case main_pass:
- /* next pass is either output of scan 0 (after optimization)
- * or output of scan 1 (if no optimization).
- */
- master->pass_type = output_pass;
- if (! cinfo->optimize_coding)
- master->scan_number++;
- break;
- case huff_opt_pass:
- /* next pass is always output of current scan */
- master->pass_type = output_pass;
- break;
- case output_pass:
- /* next pass is either optimization or output of next scan */
- if (cinfo->optimize_coding)
- master->pass_type = huff_opt_pass;
- master->scan_number++;
- break;
- }
-
- master->pass_number++;
-}
-
-
-/*
- * Initialize master compression control.
- */
-
-GLOBAL(void)
-jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only)
-{
- my_master_ptr master;
-
- master = (my_master_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_comp_master));
- cinfo->master = (struct jpeg_comp_master *) master;
- master->pub.prepare_for_pass = prepare_for_pass;
- master->pub.pass_startup = pass_startup;
- master->pub.finish_pass = finish_pass_master;
- master->pub.is_last_pass = FALSE;
-
- /* Validate parameters, determine derived values */
- initial_setup(cinfo);
-
- if (cinfo->scan_info != NULL) {
-#ifdef C_MULTISCAN_FILES_SUPPORTED
- validate_script(cinfo);
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
- } else {
- cinfo->progressive_mode = FALSE;
- cinfo->num_scans = 1;
- }
-
- if (cinfo->progressive_mode) /* TEMPORARY HACK ??? */
- cinfo->optimize_coding = TRUE; /* assume default tables no good for progressive mode */
-
- /* Initialize my private state */
- if (transcode_only) {
- /* no main pass in transcoding */
- if (cinfo->optimize_coding)
- master->pass_type = huff_opt_pass;
- else
- master->pass_type = output_pass;
- } else {
- /* for normal compression, first pass is always this type: */
- master->pass_type = main_pass;
- }
- master->scan_number = 0;
- master->pass_number = 0;
- if (cinfo->optimize_coding)
- master->total_passes = cinfo->num_scans * 2;
- else
- master->total_passes = cinfo->num_scans;
-}
diff --git a/libjpegtwrp/jcomapi.c b/libjpegtwrp/jcomapi.c
deleted file mode 100644
index 9b1fa7568..000000000
--- a/libjpegtwrp/jcomapi.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * jcomapi.c
- *
- * Copyright (C) 1994-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains application interface routines that are used for both
- * compression and decompression.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * Abort processing of a JPEG compression or decompression operation,
- * but don't destroy the object itself.
- *
- * For this, we merely clean up all the nonpermanent memory pools.
- * Note that temp files (virtual arrays) are not allowed to belong to
- * the permanent pool, so we will be able to close all temp files here.
- * Closing a data source or destination, if necessary, is the application's
- * responsibility.
- */
-
-GLOBAL(void)
-jpeg_abort (j_common_ptr cinfo)
-{
- int pool;
-
- /* Do nothing if called on a not-initialized or destroyed JPEG object. */
- if (cinfo->mem == NULL)
- return;
-
- /* Releasing pools in reverse order might help avoid fragmentation
- * with some (brain-damaged) malloc libraries.
- */
- for (pool = JPOOL_NUMPOOLS-1; pool > JPOOL_PERMANENT; pool--) {
- (*cinfo->mem->free_pool) (cinfo, pool);
- }
-
- /* Reset overall state for possible reuse of object */
- if (cinfo->is_decompressor) {
- cinfo->global_state = DSTATE_START;
- /* Try to keep application from accessing now-deleted marker list.
- * A bit kludgy to do it here, but this is the most central place.
- */
- ((j_decompress_ptr) cinfo)->marker_list = NULL;
- } else {
- cinfo->global_state = CSTATE_START;
- }
-}
-
-
-/*
- * Destruction of a JPEG object.
- *
- * Everything gets deallocated except the master jpeg_compress_struct itself
- * and the error manager struct. Both of these are supplied by the application
- * and must be freed, if necessary, by the application. (Often they are on
- * the stack and so don't need to be freed anyway.)
- * Closing a data source or destination, if necessary, is the application's
- * responsibility.
- */
-
-GLOBAL(void)
-jpeg_destroy (j_common_ptr cinfo)
-{
- /* We need only tell the memory manager to release everything. */
- /* NB: mem pointer is NULL if memory mgr failed to initialize. */
- if (cinfo->mem != NULL)
- (*cinfo->mem->self_destruct) (cinfo);
- cinfo->mem = NULL; /* be safe if jpeg_destroy is called twice */
- cinfo->global_state = 0; /* mark it destroyed */
-}
-
-
-/*
- * Convenience routines for allocating quantization and Huffman tables.
- * (Would jutils.c be a more reasonable place to put these?)
- */
-
-GLOBAL(JQUANT_TBL *)
-jpeg_alloc_quant_table (j_common_ptr cinfo)
-{
- JQUANT_TBL *tbl;
-
- tbl = (JQUANT_TBL *)
- (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JQUANT_TBL));
- tbl->sent_table = FALSE; /* make sure this is false in any new table */
- return tbl;
-}
-
-
-GLOBAL(JHUFF_TBL *)
-jpeg_alloc_huff_table (j_common_ptr cinfo)
-{
- JHUFF_TBL *tbl;
-
- tbl = (JHUFF_TBL *)
- (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JHUFF_TBL));
- tbl->sent_table = FALSE; /* make sure this is false in any new table */
- return tbl;
-}
diff --git a/libjpegtwrp/jconfig.bcc b/libjpegtwrp/jconfig.bcc
deleted file mode 100644
index c6c53ff63..000000000
--- a/libjpegtwrp/jconfig.bcc
+++ /dev/null
@@ -1,48 +0,0 @@
-/* jconfig.bcc --- jconfig.h for Borland C (Turbo C) on MS-DOS or OS/2. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#ifdef __MSDOS__
-#define NEED_FAR_POINTERS /* for small or medium memory model */
-#endif
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN /* this assumes you have -w-stu in CFLAGS */
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#ifdef __MSDOS__
-#define USE_MSDOS_MEMMGR /* Define this if you use jmemdos.c */
-#define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */
-#define USE_FMEM /* Borland has _fmemcpy() and _fmemset() */
-#endif
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED /* BMP image file format */
-#define GIF_SUPPORTED /* GIF image file format */
-#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED /* Utah RLE image file format */
-#define TARGA_SUPPORTED /* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE
-#define USE_SETMODE /* Borland has setmode() */
-#ifdef __MSDOS__
-#define NEED_SIGNAL_CATCHER /* Define this if you use jmemdos.c */
-#endif
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT /* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */
diff --git a/libjpegtwrp/jconfig.cfg b/libjpegtwrp/jconfig.cfg
deleted file mode 100644
index 36a04fa84..000000000
--- a/libjpegtwrp/jconfig.cfg
+++ /dev/null
@@ -1,44 +0,0 @@
-/* jconfig.cfg --- source file edited by configure script */
-/* see jconfig.doc for explanations */
-
-#undef HAVE_PROTOTYPES
-#undef HAVE_UNSIGNED_CHAR
-#undef HAVE_UNSIGNED_SHORT
-#undef void
-#undef const
-#undef CHAR_IS_UNSIGNED
-#undef HAVE_STDDEF_H
-#undef HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-/* Define this if you get warnings about undefined structures. */
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-#undef INLINE
-/* These are for configuring the JPEG memory manager. */
-#undef DEFAULT_MAX_MEM
-#undef NO_MKTEMP
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED /* BMP image file format */
-#define GIF_SUPPORTED /* GIF image file format */
-#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED /* Utah RLE image file format */
-#define TARGA_SUPPORTED /* Targa image file format */
-
-#undef TWO_FILE_COMMANDLINE
-#undef NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-
-/* Define this if you want percent-done progress reports from cjpeg/djpeg. */
-#undef PROGRESS_REPORT
-
-#endif /* JPEG_CJPEG_DJPEG */
diff --git a/libjpegtwrp/jconfig.dj b/libjpegtwrp/jconfig.dj
deleted file mode 100644
index f759a9dbd..000000000
--- a/libjpegtwrp/jconfig.dj
+++ /dev/null
@@ -1,38 +0,0 @@
-/* jconfig.dj --- jconfig.h for DJGPP (Delorie's GNU C port) on MS-DOS. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS /* DJGPP uses flat 32-bit addressing */
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED /* BMP image file format */
-#define GIF_SUPPORTED /* GIF image file format */
-#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED /* Utah RLE image file format */
-#define TARGA_SUPPORTED /* Targa image file format */
-
-#undef TWO_FILE_COMMANDLINE /* optional */
-#define USE_SETMODE /* Needed to make one-file style work in DJGPP */
-#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT /* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */
diff --git a/libjpegtwrp/jconfig.doc b/libjpegtwrp/jconfig.doc
deleted file mode 100644
index c18d1c064..000000000
--- a/libjpegtwrp/jconfig.doc
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * jconfig.doc
- *
- * Copyright (C) 1991-1994, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file documents the configuration options that are required to
- * customize the JPEG software for a particular system.
- *
- * The actual configuration options for a particular installation are stored
- * in jconfig.h. On many machines, jconfig.h can be generated automatically
- * or copied from one of the "canned" jconfig files that we supply. But if
- * you need to generate a jconfig.h file by hand, this file tells you how.
- *
- * DO NOT EDIT THIS FILE --- IT WON'T ACCOMPLISH ANYTHING.
- * EDIT A COPY NAMED JCONFIG.H.
- */
-
-
-/*
- * These symbols indicate the properties of your machine or compiler.
- * #define the symbol if yes, #undef it if no.
- */
-
-/* Does your compiler support function prototypes?
- * (If not, you also need to use ansi2knr, see install.doc)
- */
-#define HAVE_PROTOTYPES
-
-/* Does your compiler support the declaration "unsigned char" ?
- * How about "unsigned short" ?
- */
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-
-/* Define "void" as "char" if your compiler doesn't know about type void.
- * NOTE: be sure to define void such that "void *" represents the most general
- * pointer type, e.g., that returned by malloc().
- */
-/* #define void char */
-
-/* Define "const" as empty if your compiler doesn't know the "const" keyword.
- */
-/* #define const */
-
-/* Define this if an ordinary "char" type is unsigned.
- * If you're not sure, leaving it undefined will work at some cost in speed.
- * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal.
- */
-#undef CHAR_IS_UNSIGNED
-
-/* Define this if your system has an ANSI-conforming <stddef.h> file.
- */
-#define HAVE_STDDEF_H
-
-/* Define this if your system has an ANSI-conforming <stdlib.h> file.
- */
-#define HAVE_STDLIB_H
-
-/* Define this if your system does not have an ANSI/SysV <string.h>,
- * but does have a BSD-style <strings.h>.
- */
-#undef NEED_BSD_STRINGS
-
-/* Define this if your system does not provide typedef size_t in any of the
- * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in
- * <sys/types.h> instead.
- */
-#undef NEED_SYS_TYPES_H
-
-/* For 80x86 machines, you need to define NEED_FAR_POINTERS,
- * unless you are using a large-data memory model or 80386 flat-memory mode.
- * On less brain-damaged CPUs this symbol must not be defined.
- * (Defining this symbol causes large data structures to be referenced through
- * "far" pointers and to be allocated with a special version of malloc.)
- */
-#undef NEED_FAR_POINTERS
-
-/* Define this if your linker needs global names to be unique in less
- * than the first 15 characters.
- */
-#undef NEED_SHORT_EXTERNAL_NAMES
-
-/* Although a real ANSI C compiler can deal perfectly well with pointers to
- * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI
- * and pseudo-ANSI compilers get confused. To keep one of these bozos happy,
- * define INCOMPLETE_TYPES_BROKEN. This is not recommended unless you
- * actually get "missing structure definition" warnings or errors while
- * compiling the JPEG code.
- */
-#undef INCOMPLETE_TYPES_BROKEN
-
-
-/*
- * The following options affect code selection within the JPEG library,
- * but they don't need to be visible to applications using the library.
- * To minimize application namespace pollution, the symbols won't be
- * defined unless JPEG_INTERNALS has been defined.
- */
-
-#ifdef JPEG_INTERNALS
-
-/* Define this if your compiler implements ">>" on signed values as a logical
- * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift,
- * which is the normal and rational definition.
- */
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-
-#endif /* JPEG_INTERNALS */
-
-
-/*
- * The remaining options do not affect the JPEG library proper,
- * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c).
- * Other applications can ignore these.
- */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-/* These defines indicate which image (non-JPEG) file formats are allowed. */
-
-#define BMP_SUPPORTED /* BMP image file format */
-#define GIF_SUPPORTED /* GIF image file format */
-#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED /* Utah RLE image file format */
-#define TARGA_SUPPORTED /* Targa image file format */
-
-/* Define this if you want to name both input and output files on the command
- * line, rather than using stdout and optionally stdin. You MUST do this if
- * your system can't cope with binary I/O to stdin/stdout. See comments at
- * head of cjpeg.c or djpeg.c.
- */
-#undef TWO_FILE_COMMANDLINE
-
-/* Define this if your system needs explicit cleanup of temporary files.
- * This is crucial under MS-DOS, where the temporary "files" may be areas
- * of extended memory; on most other systems it's not as important.
- */
-#undef NEED_SIGNAL_CATCHER
-
-/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb").
- * This is necessary on systems that distinguish text files from binary files,
- * and is harmless on most systems that don't. If you have one of the rare
- * systems that complains about the "b" spec, define this symbol.
- */
-#undef DONT_USE_B_MODE
-
-/* Define this if you want percent-done progress reports from cjpeg/djpeg.
- */
-#undef PROGRESS_REPORT
-
-
-#endif /* JPEG_CJPEG_DJPEG */
diff --git a/libjpegtwrp/jconfig.h b/libjpegtwrp/jconfig.h
deleted file mode 100644
index 15a98177b..000000000
--- a/libjpegtwrp/jconfig.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/* android jconfig.h */
-/*
- * jconfig.doc
- *
- * Copyright (C) 1991-1994, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file documents the configuration options that are required to
- * customize the JPEG software for a particular system.
- *
- * The actual configuration options for a particular installation are stored
- * in jconfig.h. On many machines, jconfig.h can be generated automatically
- * or copied from one of the "canned" jconfig files that we supply. But if
- * you need to generate a jconfig.h file by hand, this file tells you how.
- *
- * DO NOT EDIT THIS FILE --- IT WON'T ACCOMPLISH ANYTHING.
- * EDIT A COPY NAMED JCONFIG.H.
- */
-
-
-/*
- * These symbols indicate the properties of your machine or compiler.
- * #define the symbol if yes, #undef it if no.
- */
-
-/* Does your compiler support function prototypes?
- * (If not, you also need to use ansi2knr, see install.doc)
- */
-#define HAVE_PROTOTYPES
-
-/* Does your compiler support the declaration "unsigned char" ?
- * How about "unsigned short" ?
- */
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-
-/* Define "void" as "char" if your compiler doesn't know about type void.
- * NOTE: be sure to define void such that "void *" represents the most general
- * pointer type, e.g., that returned by malloc().
- */
-/* #define void char */
-
-/* Define "const" as empty if your compiler doesn't know the "const" keyword.
- */
-/* #define const */
-
-/* Define this if an ordinary "char" type is unsigned.
- * If you're not sure, leaving it undefined will work at some cost in speed.
- * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal.
- */
-#undef CHAR_IS_UNSIGNED
-
-/* Define this if your system has an ANSI-conforming <stddef.h> file.
- */
-#define HAVE_STDDEF_H
-
-/* Define this if your system has an ANSI-conforming <stdlib.h> file.
- */
-#define HAVE_STDLIB_H
-
-/* Define this if your system does not have an ANSI/SysV <string.h>,
- * but does have a BSD-style <strings.h>.
- */
-#undef NEED_BSD_STRINGS
-
-/* Define this if your system does not provide typedef size_t in any of the
- * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in
- * <sys/types.h> instead.
- */
-#undef NEED_SYS_TYPES_H
-
-/* For 80x86 machines, you need to define NEED_FAR_POINTERS,
- * unless you are using a large-data memory model or 80386 flat-memory mode.
- * On less brain-damaged CPUs this symbol must not be defined.
- * (Defining this symbol causes large data structures to be referenced through
- * "far" pointers and to be allocated with a special version of malloc.)
- */
-#undef NEED_FAR_POINTERS
-
-/* Define this if your linker needs global names to be unique in less
- * than the first 15 characters.
- */
-#undef NEED_SHORT_EXTERNAL_NAMES
-
-/* Although a real ANSI C compiler can deal perfectly well with pointers to
- * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI
- * and pseudo-ANSI compilers get confused. To keep one of these bozos happy,
- * define INCOMPLETE_TYPES_BROKEN. This is not recommended unless you
- * actually get "missing structure definition" warnings or errors while
- * compiling the JPEG code.
- */
-#undef INCOMPLETE_TYPES_BROKEN
-
-
-/*
- * The following options affect code selection within the JPEG library,
- * but they don't need to be visible to applications using the library.
- * To minimize application namespace pollution, the symbols won't be
- * defined unless JPEG_INTERNALS has been defined.
- */
-
-#ifdef JPEG_INTERNALS
-
-/* Define this if your compiler implements ">>" on signed values as a logical
- * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift,
- * which is the normal and rational definition.
- */
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-
-#endif /* JPEG_INTERNALS */
-
-
-/*
- * The remaining options do not affect the JPEG library proper,
- * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c).
- * Other applications can ignore these.
- */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-/* These defines indicate which image (non-JPEG) file formats are allowed. */
-
-#define BMP_SUPPORTED /* BMP image file format */
-#define GIF_SUPPORTED /* GIF image file format */
-#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED /* Utah RLE image file format */
-#define TARGA_SUPPORTED /* Targa image file format */
-
-/* Define this if you want to name both input and output files on the command
- * line, rather than using stdout and optionally stdin. You MUST do this if
- * your system can't cope with binary I/O to stdin/stdout. See comments at
- * head of cjpeg.c or djpeg.c.
- */
-#undef TWO_FILE_COMMANDLINE
-
-/* Define this if your system needs explicit cleanup of temporary files.
- * This is crucial under MS-DOS, where the temporary "files" may be areas
- * of extended memory; on most other systems it's not as important.
- */
-#undef NEED_SIGNAL_CATCHER
-
-/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb").
- * This is necessary on systems that distinguish text files from binary files,
- * and is harmless on most systems that don't. If you have one of the rare
- * systems that complains about the "b" spec, define this symbol.
- */
-#undef DONT_USE_B_MODE
-
-/* Define this if you want percent-done progress reports from cjpeg/djpeg.
- */
-#undef PROGRESS_REPORT
-
-
-#endif /* JPEG_CJPEG_DJPEG */
diff --git a/libjpegtwrp/jconfig.mac b/libjpegtwrp/jconfig.mac
deleted file mode 100644
index 0de3efe24..000000000
--- a/libjpegtwrp/jconfig.mac
+++ /dev/null
@@ -1,43 +0,0 @@
-/* jconfig.mac --- jconfig.h for CodeWarrior on Apple Macintosh */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#define USE_MAC_MEMMGR /* Define this if you use jmemmac.c */
-
-#define ALIGN_TYPE long /* Needed for 680x0 Macs */
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED /* BMP image file format */
-#define GIF_SUPPORTED /* GIF image file format */
-#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED /* Utah RLE image file format */
-#define TARGA_SUPPORTED /* Targa image file format */
-
-#define USE_CCOMMAND /* Command line reader for Macintosh */
-#define TWO_FILE_COMMANDLINE /* Binary I/O thru stdin/stdout doesn't work */
-
-#undef NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT /* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */
diff --git a/libjpegtwrp/jconfig.manx b/libjpegtwrp/jconfig.manx
deleted file mode 100644
index 6dd0d008e..000000000
--- a/libjpegtwrp/jconfig.manx
+++ /dev/null
@@ -1,43 +0,0 @@
-/* jconfig.manx --- jconfig.h for Amiga systems using Manx Aztec C ver 5.x. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#define TEMP_DIRECTORY "JPEGTMP:" /* recommended setting for Amiga */
-
-#define SHORTxSHORT_32 /* produces better DCT code with Aztec C */
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED /* BMP image file format */
-#define GIF_SUPPORTED /* GIF image file format */
-#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED /* Utah RLE image file format */
-#define TARGA_SUPPORTED /* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE
-#define NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT /* optional */
-
-#define signal_catcher _abort /* hack for Aztec C naming requirements */
-
-#endif /* JPEG_CJPEG_DJPEG */
diff --git a/libjpegtwrp/jconfig.mc6 b/libjpegtwrp/jconfig.mc6
deleted file mode 100644
index c55082df4..000000000
--- a/libjpegtwrp/jconfig.mc6
+++ /dev/null
@@ -1,52 +0,0 @@
-/* jconfig.mc6 --- jconfig.h for Microsoft C on MS-DOS, version 6.00A & up. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#define NEED_FAR_POINTERS /* for small or medium memory model */
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#define USE_MSDOS_MEMMGR /* Define this if you use jmemdos.c */
-
-#define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */
-
-#define USE_FMEM /* Microsoft has _fmemcpy() and _fmemset() */
-
-#define NEED_FHEAPMIN /* far heap management routines are broken */
-
-#define SHORTxLCONST_32 /* enable compiler-specific DCT optimization */
-/* Note: the above define is known to improve the code with Microsoft C 6.00A.
- * I do not know whether it is good for later compiler versions.
- * Please report any info on this point to jpeg-info@uunet.uu.net.
- */
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED /* BMP image file format */
-#define GIF_SUPPORTED /* GIF image file format */
-#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED /* Utah RLE image file format */
-#define TARGA_SUPPORTED /* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE
-#define USE_SETMODE /* Microsoft has setmode() */
-#define NEED_SIGNAL_CATCHER /* Define this if you use jmemdos.c */
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT /* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */
diff --git a/libjpegtwrp/jconfig.sas b/libjpegtwrp/jconfig.sas
deleted file mode 100644
index efdac2229..000000000
--- a/libjpegtwrp/jconfig.sas
+++ /dev/null
@@ -1,43 +0,0 @@
-/* jconfig.sas --- jconfig.h for Amiga systems using SAS C 6.0 and up. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#define TEMP_DIRECTORY "JPEGTMP:" /* recommended setting for Amiga */
-
-#define NO_MKTEMP /* SAS C doesn't have mktemp() */
-
-#define SHORTxSHORT_32 /* produces better DCT code with SAS C */
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED /* BMP image file format */
-#define GIF_SUPPORTED /* GIF image file format */
-#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED /* Utah RLE image file format */
-#define TARGA_SUPPORTED /* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE
-#define NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT /* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */
diff --git a/libjpegtwrp/jconfig.st b/libjpegtwrp/jconfig.st
deleted file mode 100644
index 4421b7a1a..000000000
--- a/libjpegtwrp/jconfig.st
+++ /dev/null
@@ -1,42 +0,0 @@
-/* jconfig.st --- jconfig.h for Atari ST/STE/TT using Pure C or Turbo C. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-#define INCOMPLETE_TYPES_BROKEN /* suppress undefined-structure warnings */
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#define ALIGN_TYPE long /* apparently double is a weird size? */
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED /* BMP image file format */
-#define GIF_SUPPORTED /* GIF image file format */
-#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED /* Utah RLE image file format */
-#define TARGA_SUPPORTED /* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE /* optional -- undef if you like Unix style */
-/* Note: if you undef TWO_FILE_COMMANDLINE, you may need to define
- * USE_SETMODE. Some Atari compilers require it, some do not.
- */
-#define NEED_SIGNAL_CATCHER /* needed if you use jmemname.c */
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT /* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */
diff --git a/libjpegtwrp/jconfig.vc b/libjpegtwrp/jconfig.vc
deleted file mode 100644
index 7e291c75b..000000000
--- a/libjpegtwrp/jconfig.vc
+++ /dev/null
@@ -1,45 +0,0 @@
-/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 95 or NT. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS /* we presume a 32-bit flat memory model */
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-/* Define "boolean" as unsigned char, not int, per Windows custom */
-#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */
-typedef unsigned char boolean;
-#endif
-#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */
-
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED /* BMP image file format */
-#define GIF_SUPPORTED /* GIF image file format */
-#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED /* Utah RLE image file format */
-#define TARGA_SUPPORTED /* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE /* optional */
-#define USE_SETMODE /* Microsoft has setmode() */
-#undef NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT /* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */
diff --git a/libjpegtwrp/jconfig.vms b/libjpegtwrp/jconfig.vms
deleted file mode 100644
index 55a6ffba5..000000000
--- a/libjpegtwrp/jconfig.vms
+++ /dev/null
@@ -1,37 +0,0 @@
-/* jconfig.vms --- jconfig.h for use on Digital VMS. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED /* BMP image file format */
-#define GIF_SUPPORTED /* GIF image file format */
-#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED /* Utah RLE image file format */
-#define TARGA_SUPPORTED /* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE /* Needed on VMS */
-#undef NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT /* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */
diff --git a/libjpegtwrp/jconfig.wat b/libjpegtwrp/jconfig.wat
deleted file mode 100644
index 6cc545bae..000000000
--- a/libjpegtwrp/jconfig.wat
+++ /dev/null
@@ -1,38 +0,0 @@
-/* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#define CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS /* Watcom uses flat 32-bit addressing */
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED /* BMP image file format */
-#define GIF_SUPPORTED /* GIF image file format */
-#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED /* Utah RLE image file format */
-#define TARGA_SUPPORTED /* Targa image file format */
-
-#undef TWO_FILE_COMMANDLINE /* optional */
-#define USE_SETMODE /* Needed to make one-file style work in Watcom */
-#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT /* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */
diff --git a/libjpegtwrp/jcparam.c b/libjpegtwrp/jcparam.c
deleted file mode 100644
index a8dcf6154..000000000
--- a/libjpegtwrp/jcparam.c
+++ /dev/null
@@ -1,614 +0,0 @@
-/*
- * jcparam.c
- *
- * Copyright (C) 1991-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains optional default-setting code for the JPEG compressor.
- * Applications do not have to use this file, but those that don't use it
- * must know a lot more about the innards of the JPEG code.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * Quantization table setup routines
- */
-
-GLOBAL(void)
-jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
- const unsigned int *basic_table,
- int scale_factor, boolean force_baseline)
-/* Define a quantization table equal to the basic_table times
- * a scale factor (given as a percentage).
- * If force_baseline is TRUE, the computed quantization table entries
- * are limited to 1..255 for JPEG baseline compatibility.
- */
-{
- JQUANT_TBL ** qtblptr;
- int i;
- long temp;
-
- /* Safety check to ensure start_compress not called yet. */
- if (cinfo->global_state != CSTATE_START)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
- if (which_tbl < 0 || which_tbl >= NUM_QUANT_TBLS)
- ERREXIT1(cinfo, JERR_DQT_INDEX, which_tbl);
-
- qtblptr = & cinfo->quant_tbl_ptrs[which_tbl];
-
- if (*qtblptr == NULL)
- *qtblptr = jpeg_alloc_quant_table((j_common_ptr) cinfo);
-
- for (i = 0; i < DCTSIZE2; i++) {
- temp = ((long) basic_table[i] * scale_factor + 50L) / 100L;
- /* limit the values to the valid range */
- if (temp <= 0L) temp = 1L;
- if (temp > 32767L) temp = 32767L; /* max quantizer needed for 12 bits */
- if (force_baseline && temp > 255L)
- temp = 255L; /* limit to baseline range if requested */
- (*qtblptr)->quantval[i] = (UINT16) temp;
- }
-
- /* Initialize sent_table FALSE so table will be written to JPEG file. */
- (*qtblptr)->sent_table = FALSE;
-}
-
-
-GLOBAL(void)
-jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
- boolean force_baseline)
-/* Set or change the 'quality' (quantization) setting, using default tables
- * and a straight percentage-scaling quality scale. In most cases it's better
- * to use jpeg_set_quality (below); this entry point is provided for
- * applications that insist on a linear percentage scaling.
- */
-{
- /* These are the sample quantization tables given in JPEG spec section K.1.
- * The spec says that the values given produce "good" quality, and
- * when divided by 2, "very good" quality.
- */
- static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = {
- 16, 11, 10, 16, 24, 40, 51, 61,
- 12, 12, 14, 19, 26, 58, 60, 55,
- 14, 13, 16, 24, 40, 57, 69, 56,
- 14, 17, 22, 29, 51, 87, 80, 62,
- 18, 22, 37, 56, 68, 109, 103, 77,
- 24, 35, 55, 64, 81, 104, 113, 92,
- 49, 64, 78, 87, 103, 121, 120, 101,
- 72, 92, 95, 98, 112, 100, 103, 99
- };
- static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = {
- 17, 18, 24, 47, 99, 99, 99, 99,
- 18, 21, 26, 66, 99, 99, 99, 99,
- 24, 26, 56, 99, 99, 99, 99, 99,
- 47, 66, 99, 99, 99, 99, 99, 99,
- 99, 99, 99, 99, 99, 99, 99, 99,
- 99, 99, 99, 99, 99, 99, 99, 99,
- 99, 99, 99, 99, 99, 99, 99, 99,
- 99, 99, 99, 99, 99, 99, 99, 99
- };
-
- /* Set up two quantization tables using the specified scaling */
- jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl,
- scale_factor, force_baseline);
- jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl,
- scale_factor, force_baseline);
-}
-
-
-GLOBAL(int)
-jpeg_quality_scaling (int quality)
-/* Convert a user-specified quality rating to a percentage scaling factor
- * for an underlying quantization table, using our recommended scaling curve.
- * The input 'quality' factor should be 0 (terrible) to 100 (very good).
- */
-{
- /* Safety limit on quality factor. Convert 0 to 1 to avoid zero divide. */
- if (quality <= 0) quality = 1;
- if (quality > 100) quality = 100;
-
- /* The basic table is used as-is (scaling 100) for a quality of 50.
- * Qualities 50..100 are converted to scaling percentage 200 - 2*Q;
- * note that at Q=100 the scaling is 0, which will cause jpeg_add_quant_table
- * to make all the table entries 1 (hence, minimum quantization loss).
- * Qualities 1..50 are converted to scaling percentage 5000/Q.
- */
- if (quality < 50)
- quality = 5000 / quality;
- else
- quality = 200 - quality*2;
-
- return quality;
-}
-
-
-GLOBAL(void)
-jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline)
-/* Set or change the 'quality' (quantization) setting, using default tables.
- * This is the standard quality-adjusting entry point for typical user
- * interfaces; only those who want detailed control over quantization tables
- * would use the preceding three routines directly.
- */
-{
- /* Convert user 0-100 rating to percentage scaling */
- quality = jpeg_quality_scaling(quality);
-
- /* Set up standard quality tables */
- jpeg_set_linear_quality(cinfo, quality, force_baseline);
-}
-
-
-/*
- * Huffman table setup routines
- */
-
-LOCAL(void)
-add_huff_table (j_compress_ptr cinfo,
- JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val)
-/* Define a Huffman table */
-{
- int nsymbols, len;
-
- if (*htblptr == NULL)
- *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
-
- /* Copy the number-of-symbols-of-each-code-length counts */
- MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits));
-
- /* Validate the counts. We do this here mainly so we can copy the right
- * number of symbols from the val[] array, without risking marching off
- * the end of memory. jchuff.c will do a more thorough test later.
- */
- nsymbols = 0;
- for (len = 1; len <= 16; len++)
- nsymbols += bits[len];
- if (nsymbols < 1 || nsymbols > 256)
- ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
-
- MEMCOPY((*htblptr)->huffval, val, nsymbols * SIZEOF(UINT8));
-
- /* Initialize sent_table FALSE so table will be written to JPEG file. */
- (*htblptr)->sent_table = FALSE;
-}
-
-
-LOCAL(void)
-std_huff_tables (j_compress_ptr cinfo)
-/* Set up the standard Huffman tables (cf. JPEG standard section K.3) */
-/* IMPORTANT: these are only valid for 8-bit data precision! */
-{
- static const UINT8 bits_dc_luminance[17] =
- { /* 0-base */ 0, 0, 1, 5, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 };
- static const UINT8 val_dc_luminance[] =
- { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 };
-
- static const UINT8 bits_dc_chrominance[17] =
- { /* 0-base */ 0, 0, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 };
- static const UINT8 val_dc_chrominance[] =
- { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 };
-
- static const UINT8 bits_ac_luminance[17] =
- { /* 0-base */ 0, 0, 2, 1, 3, 3, 2, 4, 3, 5, 5, 4, 4, 0, 0, 1, 0x7d };
- static const UINT8 val_ac_luminance[] =
- { 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12,
- 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07,
- 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08,
- 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0,
- 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16,
- 0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28,
- 0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39,
- 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49,
- 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59,
- 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69,
- 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79,
- 0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89,
- 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98,
- 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7,
- 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6,
- 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5,
- 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4,
- 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2,
- 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea,
- 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
- 0xf9, 0xfa };
-
- static const UINT8 bits_ac_chrominance[17] =
- { /* 0-base */ 0, 0, 2, 1, 2, 4, 4, 3, 4, 7, 5, 4, 4, 0, 1, 2, 0x77 };
- static const UINT8 val_ac_chrominance[] =
- { 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21,
- 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71,
- 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91,
- 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0,
- 0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34,
- 0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26,
- 0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38,
- 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48,
- 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58,
- 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68,
- 0x69, 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
- 0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
- 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96,
- 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5,
- 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4,
- 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3,
- 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2,
- 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda,
- 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9,
- 0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
- 0xf9, 0xfa };
-
- add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[0],
- bits_dc_luminance, val_dc_luminance);
- add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[0],
- bits_ac_luminance, val_ac_luminance);
- add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[1],
- bits_dc_chrominance, val_dc_chrominance);
- add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[1],
- bits_ac_chrominance, val_ac_chrominance);
-}
-
-
-/*
- * Default parameter setup for compression.
- *
- * Applications that don't choose to use this routine must do their
- * own setup of all these parameters. Alternately, you can call this
- * to establish defaults and then alter parameters selectively. This
- * is the recommended approach since, if we add any new parameters,
- * your code will still work (they'll be set to reasonable defaults).
- */
-
-GLOBAL(void)
-jpeg_set_defaults (j_compress_ptr cinfo)
-{
- int i;
-
- /* Safety check to ensure start_compress not called yet. */
- if (cinfo->global_state != CSTATE_START)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
- /* Allocate comp_info array large enough for maximum component count.
- * Array is made permanent in case application wants to compress
- * multiple images at same param settings.
- */
- if (cinfo->comp_info == NULL)
- cinfo->comp_info = (jpeg_component_info *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
- MAX_COMPONENTS * SIZEOF(jpeg_component_info));
-
- /* Initialize everything not dependent on the color space */
-
- cinfo->data_precision = BITS_IN_JSAMPLE;
- /* Set up two quantization tables using default quality of 75 */
- jpeg_set_quality(cinfo, 75, TRUE);
- /* Set up two Huffman tables */
- std_huff_tables(cinfo);
-
- /* Initialize default arithmetic coding conditioning */
- for (i = 0; i < NUM_ARITH_TBLS; i++) {
- cinfo->arith_dc_L[i] = 0;
- cinfo->arith_dc_U[i] = 1;
- cinfo->arith_ac_K[i] = 5;
- }
-
- /* Default is no multiple-scan output */
- cinfo->scan_info = NULL;
- cinfo->num_scans = 0;
-
- /* Expect normal source image, not raw downsampled data */
- cinfo->raw_data_in = FALSE;
-
- /* Use Huffman coding, not arithmetic coding, by default */
- cinfo->arith_code = FALSE;
-
- /* By default, don't do extra passes to optimize entropy coding */
- cinfo->optimize_coding = FALSE;
- /* The standard Huffman tables are only valid for 8-bit data precision.
- * If the precision is higher, force optimization on so that usable
- * tables will be computed. This test can be removed if default tables
- * are supplied that are valid for the desired precision.
- */
- if (cinfo->data_precision > 8)
- cinfo->optimize_coding = TRUE;
-
- /* By default, use the simpler non-cosited sampling alignment */
- cinfo->CCIR601_sampling = FALSE;
-
- /* No input smoothing */
- cinfo->smoothing_factor = 0;
-
- /* DCT algorithm preference */
- cinfo->dct_method = JDCT_DEFAULT;
-
- /* No restart markers */
- cinfo->restart_interval = 0;
- cinfo->restart_in_rows = 0;
-
- /* Fill in default JFIF marker parameters. Note that whether the marker
- * will actually be written is determined by jpeg_set_colorspace.
- *
- * By default, the library emits JFIF version code 1.01.
- * An application that wants to emit JFIF 1.02 extension markers should set
- * JFIF_minor_version to 2. We could probably get away with just defaulting
- * to 1.02, but there may still be some decoders in use that will complain
- * about that; saying 1.01 should minimize compatibility problems.
- */
- cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */
- cinfo->JFIF_minor_version = 1;
- cinfo->density_unit = 0; /* Pixel size is unknown by default */
- cinfo->X_density = 1; /* Pixel aspect ratio is square by default */
- cinfo->Y_density = 1;
-
- /* Choose JPEG colorspace based on input space, set defaults accordingly */
-
- jpeg_default_colorspace(cinfo);
-}
-
-
-/*
- * Select an appropriate JPEG colorspace for in_color_space.
- */
-
-GLOBAL(void)
-jpeg_default_colorspace (j_compress_ptr cinfo)
-{
- switch (cinfo->in_color_space) {
- case JCS_GRAYSCALE:
- jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
- break;
- case JCS_RGB:
- jpeg_set_colorspace(cinfo, JCS_YCbCr);
- break;
- case JCS_YCbCr:
- jpeg_set_colorspace(cinfo, JCS_YCbCr);
- break;
- case JCS_CMYK:
- jpeg_set_colorspace(cinfo, JCS_CMYK); /* By default, no translation */
- break;
- case JCS_YCCK:
- jpeg_set_colorspace(cinfo, JCS_YCCK);
- break;
- case JCS_UNKNOWN:
- jpeg_set_colorspace(cinfo, JCS_UNKNOWN);
- break;
- default:
- ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
- }
-}
-
-
-/*
- * Set the JPEG colorspace, and choose colorspace-dependent default values.
- */
-
-GLOBAL(void)
-jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace)
-{
- jpeg_component_info * compptr;
- int ci;
-
-#define SET_COMP(index,id,hsamp,vsamp,quant,dctbl,actbl) \
- (compptr = &cinfo->comp_info[index], \
- compptr->component_id = (id), \
- compptr->h_samp_factor = (hsamp), \
- compptr->v_samp_factor = (vsamp), \
- compptr->quant_tbl_no = (quant), \
- compptr->dc_tbl_no = (dctbl), \
- compptr->ac_tbl_no = (actbl) )
-
- /* Safety check to ensure start_compress not called yet. */
- if (cinfo->global_state != CSTATE_START)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
- /* For all colorspaces, we use Q and Huff tables 0 for luminance components,
- * tables 1 for chrominance components.
- */
-
- cinfo->jpeg_color_space = colorspace;
-
- cinfo->write_JFIF_header = FALSE; /* No marker for non-JFIF colorspaces */
- cinfo->write_Adobe_marker = FALSE; /* write no Adobe marker by default */
-
- switch (colorspace) {
- case JCS_GRAYSCALE:
- cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
- cinfo->num_components = 1;
- /* JFIF specifies component ID 1 */
- SET_COMP(0, 1, 1,1, 0, 0,0);
- break;
- case JCS_RGB:
- cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */
- cinfo->num_components = 3;
- SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, 0,0);
- SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, 0,0);
- SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, 0,0);
- break;
- case JCS_YCbCr:
- cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
- cinfo->num_components = 3;
- /* JFIF specifies component IDs 1,2,3 */
- /* We default to 2x2 subsamples of chrominance */
- SET_COMP(0, 1, 2,2, 0, 0,0);
- SET_COMP(1, 2, 1,1, 1, 1,1);
- SET_COMP(2, 3, 1,1, 1, 1,1);
- break;
- case JCS_CMYK:
- cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag CMYK */
- cinfo->num_components = 4;
- SET_COMP(0, 0x43 /* 'C' */, 1,1, 0, 0,0);
- SET_COMP(1, 0x4D /* 'M' */, 1,1, 0, 0,0);
- SET_COMP(2, 0x59 /* 'Y' */, 1,1, 0, 0,0);
- SET_COMP(3, 0x4B /* 'K' */, 1,1, 0, 0,0);
- break;
- case JCS_YCCK:
- cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag YCCK */
- cinfo->num_components = 4;
- SET_COMP(0, 1, 2,2, 0, 0,0);
- SET_COMP(1, 2, 1,1, 1, 1,1);
- SET_COMP(2, 3, 1,1, 1, 1,1);
- SET_COMP(3, 4, 2,2, 0, 0,0);
- break;
- case JCS_UNKNOWN:
- cinfo->num_components = cinfo->input_components;
- if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS)
- ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
- MAX_COMPONENTS);
- for (ci = 0; ci < cinfo->num_components; ci++) {
- SET_COMP(ci, ci, 1,1, 0, 0,0);
- }
- break;
- default:
- ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
- }
-}
-
-
-#ifdef C_PROGRESSIVE_SUPPORTED
-
-LOCAL(jpeg_scan_info *)
-fill_a_scan (jpeg_scan_info * scanptr, int ci,
- int Ss, int Se, int Ah, int Al)
-/* Support routine: generate one scan for specified component */
-{
- scanptr->comps_in_scan = 1;
- scanptr->component_index[0] = ci;
- scanptr->Ss = Ss;
- scanptr->Se = Se;
- scanptr->Ah = Ah;
- scanptr->Al = Al;
- scanptr++;
- return scanptr;
-}
-
-LOCAL(jpeg_scan_info *)
-fill_scans (jpeg_scan_info * scanptr, int ncomps,
- int Ss, int Se, int Ah, int Al)
-/* Support routine: generate one scan for each component */
-{
- int ci;
-
- for (ci = 0; ci < ncomps; ci++) {
- scanptr->comps_in_scan = 1;
- scanptr->component_index[0] = ci;
- scanptr->Ss = Ss;
- scanptr->Se = Se;
- scanptr->Ah = Ah;
- scanptr->Al = Al;
- scanptr++;
- }
- return scanptr;
-}
-
-LOCAL(jpeg_scan_info *)
-fill_dc_scans (jpeg_scan_info * scanptr, int ncomps, int Ah, int Al)
-/* Support routine: generate interleaved DC scan if possible, else N scans */
-{
- int ci;
-
- if (ncomps <= MAX_COMPS_IN_SCAN) {
- /* Single interleaved DC scan */
- scanptr->comps_in_scan = ncomps;
- for (ci = 0; ci < ncomps; ci++)
- scanptr->component_index[ci] = ci;
- scanptr->Ss = scanptr->Se = 0;
- scanptr->Ah = Ah;
- scanptr->Al = Al;
- scanptr++;
- } else {
- /* Noninterleaved DC scan for each component */
- scanptr = fill_scans(scanptr, ncomps, 0, 0, Ah, Al);
- }
- return scanptr;
-}
-
-
-/*
- * Create a recommended progressive-JPEG script.
- * cinfo->num_components and cinfo->jpeg_color_space must be correct.
- */
-
-GLOBAL(void)
-jpeg_simple_progression (j_compress_ptr cinfo)
-{
- int ncomps = cinfo->num_components;
- int nscans;
- jpeg_scan_info * scanptr;
-
- /* Safety check to ensure start_compress not called yet. */
- if (cinfo->global_state != CSTATE_START)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
- /* Figure space needed for script. Calculation must match code below! */
- if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) {
- /* Custom script for YCbCr color images. */
- nscans = 10;
- } else {
- /* All-purpose script for other color spaces. */
- if (ncomps > MAX_COMPS_IN_SCAN)
- nscans = 6 * ncomps; /* 2 DC + 4 AC scans per component */
- else
- nscans = 2 + 4 * ncomps; /* 2 DC scans; 4 AC scans per component */
- }
-
- /* Allocate space for script.
- * We need to put it in the permanent pool in case the application performs
- * multiple compressions without changing the settings. To avoid a memory
- * leak if jpeg_simple_progression is called repeatedly for the same JPEG
- * object, we try to re-use previously allocated space, and we allocate
- * enough space to handle YCbCr even if initially asked for grayscale.
- */
- if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) {
- cinfo->script_space_size = MAX(nscans, 10);
- cinfo->script_space = (jpeg_scan_info *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
- cinfo->script_space_size * SIZEOF(jpeg_scan_info));
- }
- scanptr = cinfo->script_space;
- cinfo->scan_info = scanptr;
- cinfo->num_scans = nscans;
-
- if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) {
- /* Custom script for YCbCr color images. */
- /* Initial DC scan */
- scanptr = fill_dc_scans(scanptr, ncomps, 0, 1);
- /* Initial AC scan: get some luma data out in a hurry */
- scanptr = fill_a_scan(scanptr, 0, 1, 5, 0, 2);
- /* Chroma data is too small to be worth expending many scans on */
- scanptr = fill_a_scan(scanptr, 2, 1, 63, 0, 1);
- scanptr = fill_a_scan(scanptr, 1, 1, 63, 0, 1);
- /* Complete spectral selection for luma AC */
- scanptr = fill_a_scan(scanptr, 0, 6, 63, 0, 2);
- /* Refine next bit of luma AC */
- scanptr = fill_a_scan(scanptr, 0, 1, 63, 2, 1);
- /* Finish DC successive approximation */
- scanptr = fill_dc_scans(scanptr, ncomps, 1, 0);
- /* Finish AC successive approximation */
- scanptr = fill_a_scan(scanptr, 2, 1, 63, 1, 0);
- scanptr = fill_a_scan(scanptr, 1, 1, 63, 1, 0);
- /* Luma bottom bit comes last since it's usually largest scan */
- scanptr = fill_a_scan(scanptr, 0, 1, 63, 1, 0);
- } else {
- /* All-purpose script for other color spaces. */
- /* Successive approximation first pass */
- scanptr = fill_dc_scans(scanptr, ncomps, 0, 1);
- scanptr = fill_scans(scanptr, ncomps, 1, 5, 0, 2);
- scanptr = fill_scans(scanptr, ncomps, 6, 63, 0, 2);
- /* Successive approximation second pass */
- scanptr = fill_scans(scanptr, ncomps, 1, 63, 2, 1);
- /* Successive approximation final pass */
- scanptr = fill_dc_scans(scanptr, ncomps, 1, 0);
- scanptr = fill_scans(scanptr, ncomps, 1, 63, 1, 0);
- }
-#ifdef NEEDS_ARM_ERRATA_754319_754320
- asm volatile ( "vmov s0,s0\n" );
-#endif
-
-}
-
-#endif /* C_PROGRESSIVE_SUPPORTED */
diff --git a/libjpegtwrp/jcphuff.c b/libjpegtwrp/jcphuff.c
deleted file mode 100644
index 07f9178b0..000000000
--- a/libjpegtwrp/jcphuff.c
+++ /dev/null
@@ -1,833 +0,0 @@
-/*
- * jcphuff.c
- *
- * Copyright (C) 1995-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains Huffman entropy encoding routines for progressive JPEG.
- *
- * We do not support output suspension in this module, since the library
- * currently does not allow multiple-scan files to be written with output
- * suspension.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jchuff.h" /* Declarations shared with jchuff.c */
-
-#ifdef C_PROGRESSIVE_SUPPORTED
-
-/* Expanded entropy encoder object for progressive Huffman encoding. */
-
-typedef struct {
- struct jpeg_entropy_encoder pub; /* public fields */
-
- /* Mode flag: TRUE for optimization, FALSE for actual data output */
- boolean gather_statistics;
-
- /* Bit-level coding status.
- * next_output_byte/free_in_buffer are local copies of cinfo->dest fields.
- */
- JOCTET * next_output_byte; /* => next byte to write in buffer */
- size_t free_in_buffer; /* # of byte spaces remaining in buffer */
- INT32 put_buffer; /* current bit-accumulation buffer */
- int put_bits; /* # of bits now in it */
- j_compress_ptr cinfo; /* link to cinfo (needed for dump_buffer) */
-
- /* Coding status for DC components */
- int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
-
- /* Coding status for AC components */
- int ac_tbl_no; /* the table number of the single component */
- unsigned int EOBRUN; /* run length of EOBs */
- unsigned int BE; /* # of buffered correction bits before MCU */
- char * bit_buffer; /* buffer for correction bits (1 per char) */
- /* packing correction bits tightly would save some space but cost time... */
-
- unsigned int restarts_to_go; /* MCUs left in this restart interval */
- int next_restart_num; /* next restart number to write (0-7) */
-
- /* Pointers to derived tables (these workspaces have image lifespan).
- * Since any one scan codes only DC or only AC, we only need one set
- * of tables, not one for DC and one for AC.
- */
- c_derived_tbl * derived_tbls[NUM_HUFF_TBLS];
-
- /* Statistics tables for optimization; again, one set is enough */
- long * count_ptrs[NUM_HUFF_TBLS];
-} phuff_entropy_encoder;
-
-typedef phuff_entropy_encoder * phuff_entropy_ptr;
-
-/* MAX_CORR_BITS is the number of bits the AC refinement correction-bit
- * buffer can hold. Larger sizes may slightly improve compression, but
- * 1000 is already well into the realm of overkill.
- * The minimum safe size is 64 bits.
- */
-
-#define MAX_CORR_BITS 1000 /* Max # of correction bits I can buffer */
-
-/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32.
- * We assume that int right shift is unsigned if INT32 right shift is,
- * which should be safe.
- */
-
-#ifdef RIGHT_SHIFT_IS_UNSIGNED
-#define ISHIFT_TEMPS int ishift_temp;
-#define IRIGHT_SHIFT(x,shft) \
- ((ishift_temp = (x)) < 0 ? \
- (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \
- (ishift_temp >> (shft)))
-#else
-#define ISHIFT_TEMPS
-#define IRIGHT_SHIFT(x,shft) ((x) >> (shft))
-#endif
-
-/* Forward declarations */
-METHODDEF(boolean) encode_mcu_DC_first JPP((j_compress_ptr cinfo,
- JBLOCKROW *MCU_data));
-METHODDEF(boolean) encode_mcu_AC_first JPP((j_compress_ptr cinfo,
- JBLOCKROW *MCU_data));
-METHODDEF(boolean) encode_mcu_DC_refine JPP((j_compress_ptr cinfo,
- JBLOCKROW *MCU_data));
-METHODDEF(boolean) encode_mcu_AC_refine JPP((j_compress_ptr cinfo,
- JBLOCKROW *MCU_data));
-METHODDEF(void) finish_pass_phuff JPP((j_compress_ptr cinfo));
-METHODDEF(void) finish_pass_gather_phuff JPP((j_compress_ptr cinfo));
-
-
-/*
- * Initialize for a Huffman-compressed scan using progressive JPEG.
- */
-
-METHODDEF(void)
-start_pass_phuff (j_compress_ptr cinfo, boolean gather_statistics)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
- boolean is_DC_band;
- int ci, tbl;
- jpeg_component_info * compptr;
-
- entropy->cinfo = cinfo;
- entropy->gather_statistics = gather_statistics;
-
- is_DC_band = (cinfo->Ss == 0);
-
- /* We assume jcmaster.c already validated the scan parameters. */
-
- /* Select execution routines */
- if (cinfo->Ah == 0) {
- if (is_DC_band)
- entropy->pub.encode_mcu = encode_mcu_DC_first;
- else
- entropy->pub.encode_mcu = encode_mcu_AC_first;
- } else {
- if (is_DC_band)
- entropy->pub.encode_mcu = encode_mcu_DC_refine;
- else {
- entropy->pub.encode_mcu = encode_mcu_AC_refine;
- /* AC refinement needs a correction bit buffer */
- if (entropy->bit_buffer == NULL)
- entropy->bit_buffer = (char *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- MAX_CORR_BITS * SIZEOF(char));
- }
- }
- if (gather_statistics)
- entropy->pub.finish_pass = finish_pass_gather_phuff;
- else
- entropy->pub.finish_pass = finish_pass_phuff;
-
- /* Only DC coefficients may be interleaved, so cinfo->comps_in_scan = 1
- * for AC coefficients.
- */
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- /* Initialize DC predictions to 0 */
- entropy->last_dc_val[ci] = 0;
- /* Get table index */
- if (is_DC_band) {
- if (cinfo->Ah != 0) /* DC refinement needs no table */
- continue;
- tbl = compptr->dc_tbl_no;
- } else {
- entropy->ac_tbl_no = tbl = compptr->ac_tbl_no;
- }
- if (gather_statistics) {
- /* Check for invalid table index */
- /* (make_c_derived_tbl does this in the other path) */
- if (tbl < 0 || tbl >= NUM_HUFF_TBLS)
- ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl);
- /* Allocate and zero the statistics tables */
- /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */
- if (entropy->count_ptrs[tbl] == NULL)
- entropy->count_ptrs[tbl] = (long *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- 257 * SIZEOF(long));
- MEMZERO(entropy->count_ptrs[tbl], 257 * SIZEOF(long));
- } else {
- /* Compute derived values for Huffman table */
- /* We may do this more than once for a table, but it's not expensive */
- jpeg_make_c_derived_tbl(cinfo, is_DC_band, tbl,
- & entropy->derived_tbls[tbl]);
- }
- }
-
- /* Initialize AC stuff */
- entropy->EOBRUN = 0;
- entropy->BE = 0;
-
- /* Initialize bit buffer to empty */
- entropy->put_buffer = 0;
- entropy->put_bits = 0;
-
- /* Initialize restart stuff */
- entropy->restarts_to_go = cinfo->restart_interval;
- entropy->next_restart_num = 0;
-}
-
-
-/* Outputting bytes to the file.
- * NB: these must be called only when actually outputting,
- * that is, entropy->gather_statistics == FALSE.
- */
-
-/* Emit a byte */
-#define emit_byte(entropy,val) \
- { *(entropy)->next_output_byte++ = (JOCTET) (val); \
- if (--(entropy)->free_in_buffer == 0) \
- dump_buffer(entropy); }
-
-
-LOCAL(void)
-dump_buffer (phuff_entropy_ptr entropy)
-/* Empty the output buffer; we do not support suspension in this module. */
-{
- struct jpeg_destination_mgr * dest = entropy->cinfo->dest;
-
- if (! (*dest->empty_output_buffer) (entropy->cinfo))
- ERREXIT(entropy->cinfo, JERR_CANT_SUSPEND);
- /* After a successful buffer dump, must reset buffer pointers */
- entropy->next_output_byte = dest->next_output_byte;
- entropy->free_in_buffer = dest->free_in_buffer;
-}
-
-
-/* Outputting bits to the file */
-
-/* Only the right 24 bits of put_buffer are used; the valid bits are
- * left-justified in this part. At most 16 bits can be passed to emit_bits
- * in one call, and we never retain more than 7 bits in put_buffer
- * between calls, so 24 bits are sufficient.
- */
-
-INLINE
-LOCAL(void)
-emit_bits (phuff_entropy_ptr entropy, unsigned int code, int size)
-/* Emit some bits, unless we are in gather mode */
-{
- /* This routine is heavily used, so it's worth coding tightly. */
- register INT32 put_buffer = (INT32) code;
- register int put_bits = entropy->put_bits;
-
- /* if size is 0, caller used an invalid Huffman table entry */
- if (size == 0)
- ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE);
-
- if (entropy->gather_statistics)
- return; /* do nothing if we're only getting stats */
-
- put_buffer &= (((INT32) 1)<<size) - 1; /* mask off any extra bits in code */
-
- put_bits += size; /* new number of bits in buffer */
-
- put_buffer <<= 24 - put_bits; /* align incoming bits */
-
- put_buffer |= entropy->put_buffer; /* and merge with old buffer contents */
-
- while (put_bits >= 8) {
- int c = (int) ((put_buffer >> 16) & 0xFF);
-
- emit_byte(entropy, c);
- if (c == 0xFF) { /* need to stuff a zero byte? */
- emit_byte(entropy, 0);
- }
- put_buffer <<= 8;
- put_bits -= 8;
- }
-
- entropy->put_buffer = put_buffer; /* update variables */
- entropy->put_bits = put_bits;
-}
-
-
-LOCAL(void)
-flush_bits (phuff_entropy_ptr entropy)
-{
- emit_bits(entropy, 0x7F, 7); /* fill any partial byte with ones */
- entropy->put_buffer = 0; /* and reset bit-buffer to empty */
- entropy->put_bits = 0;
-}
-
-
-/*
- * Emit (or just count) a Huffman symbol.
- */
-
-INLINE
-LOCAL(void)
-emit_symbol (phuff_entropy_ptr entropy, int tbl_no, int symbol)
-{
- if (entropy->gather_statistics)
- entropy->count_ptrs[tbl_no][symbol]++;
- else {
- c_derived_tbl * tbl = entropy->derived_tbls[tbl_no];
- emit_bits(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]);
- }
-}
-
-
-/*
- * Emit bits from a correction bit buffer.
- */
-
-LOCAL(void)
-emit_buffered_bits (phuff_entropy_ptr entropy, char * bufstart,
- unsigned int nbits)
-{
- if (entropy->gather_statistics)
- return; /* no real work */
-
- while (nbits > 0) {
- emit_bits(entropy, (unsigned int) (*bufstart), 1);
- bufstart++;
- nbits--;
- }
-}
-
-
-/*
- * Emit any pending EOBRUN symbol.
- */
-
-LOCAL(void)
-emit_eobrun (phuff_entropy_ptr entropy)
-{
- register int temp, nbits;
-
- if (entropy->EOBRUN > 0) { /* if there is any pending EOBRUN */
- temp = entropy->EOBRUN;
- nbits = 0;
- while ((temp >>= 1))
- nbits++;
- /* safety check: shouldn't happen given limited correction-bit buffer */
- if (nbits > 14)
- ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE);
-
- emit_symbol(entropy, entropy->ac_tbl_no, nbits << 4);
- if (nbits)
- emit_bits(entropy, entropy->EOBRUN, nbits);
-
- entropy->EOBRUN = 0;
-
- /* Emit any buffered correction bits */
- emit_buffered_bits(entropy, entropy->bit_buffer, entropy->BE);
- entropy->BE = 0;
- }
-}
-
-
-/*
- * Emit a restart marker & resynchronize predictions.
- */
-
-LOCAL(void)
-emit_restart (phuff_entropy_ptr entropy, int restart_num)
-{
- int ci;
-
- emit_eobrun(entropy);
-
- if (! entropy->gather_statistics) {
- flush_bits(entropy);
- emit_byte(entropy, 0xFF);
- emit_byte(entropy, JPEG_RST0 + restart_num);
- }
-
- if (entropy->cinfo->Ss == 0) {
- /* Re-initialize DC predictions to 0 */
- for (ci = 0; ci < entropy->cinfo->comps_in_scan; ci++)
- entropy->last_dc_val[ci] = 0;
- } else {
- /* Re-initialize all AC-related fields to 0 */
- entropy->EOBRUN = 0;
- entropy->BE = 0;
- }
-}
-
-
-/*
- * MCU encoding for DC initial scan (either spectral selection,
- * or first pass of successive approximation).
- */
-
-METHODDEF(boolean)
-encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
- register int temp, temp2;
- register int nbits;
- int blkn, ci;
- int Al = cinfo->Al;
- JBLOCKROW block;
- jpeg_component_info * compptr;
- ISHIFT_TEMPS
-
- entropy->next_output_byte = cinfo->dest->next_output_byte;
- entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
- /* Emit restart marker if needed */
- if (cinfo->restart_interval)
- if (entropy->restarts_to_go == 0)
- emit_restart(entropy, entropy->next_restart_num);
-
- /* Encode the MCU data blocks */
- for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
- block = MCU_data[blkn];
- ci = cinfo->MCU_membership[blkn];
- compptr = cinfo->cur_comp_info[ci];
-
- /* Compute the DC value after the required point transform by Al.
- * This is simply an arithmetic right shift.
- */
- temp2 = IRIGHT_SHIFT((int) ((*block)[0]), Al);
-
- /* DC differences are figured on the point-transformed values. */
- temp = temp2 - entropy->last_dc_val[ci];
- entropy->last_dc_val[ci] = temp2;
-
- /* Encode the DC coefficient difference per section G.1.2.1 */
- temp2 = temp;
- if (temp < 0) {
- temp = -temp; /* temp is abs value of input */
- /* For a negative input, want temp2 = bitwise complement of abs(input) */
- /* This code assumes we are on a two's complement machine */
- temp2--;
- }
-
- /* Find the number of bits needed for the magnitude of the coefficient */
- nbits = 0;
- while (temp) {
- nbits++;
- temp >>= 1;
- }
- /* Check for out-of-range coefficient values.
- * Since we're encoding a difference, the range limit is twice as much.
- */
- if (nbits > MAX_COEF_BITS+1)
- ERREXIT(cinfo, JERR_BAD_DCT_COEF);
-
- /* Count/emit the Huffman-coded symbol for the number of bits */
- emit_symbol(entropy, compptr->dc_tbl_no, nbits);
-
- /* Emit that number of bits of the value, if positive, */
- /* or the complement of its magnitude, if negative. */
- if (nbits) /* emit_bits rejects calls with size 0 */
- emit_bits(entropy, (unsigned int) temp2, nbits);
- }
-
- cinfo->dest->next_output_byte = entropy->next_output_byte;
- cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
- /* Update restart-interval state too */
- if (cinfo->restart_interval) {
- if (entropy->restarts_to_go == 0) {
- entropy->restarts_to_go = cinfo->restart_interval;
- entropy->next_restart_num++;
- entropy->next_restart_num &= 7;
- }
- entropy->restarts_to_go--;
- }
-
- return TRUE;
-}
-
-
-/*
- * MCU encoding for AC initial scan (either spectral selection,
- * or first pass of successive approximation).
- */
-
-METHODDEF(boolean)
-encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
- register int temp, temp2;
- register int nbits;
- register int r, k;
- int Se = cinfo->Se;
- int Al = cinfo->Al;
- JBLOCKROW block;
-
- entropy->next_output_byte = cinfo->dest->next_output_byte;
- entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
- /* Emit restart marker if needed */
- if (cinfo->restart_interval)
- if (entropy->restarts_to_go == 0)
- emit_restart(entropy, entropy->next_restart_num);
-
- /* Encode the MCU data block */
- block = MCU_data[0];
-
- /* Encode the AC coefficients per section G.1.2.2, fig. G.3 */
-
- r = 0; /* r = run length of zeros */
-
- for (k = cinfo->Ss; k <= Se; k++) {
- if ((temp = (*block)[jpeg_natural_order[k]]) == 0) {
- r++;
- continue;
- }
- /* We must apply the point transform by Al. For AC coefficients this
- * is an integer division with rounding towards 0. To do this portably
- * in C, we shift after obtaining the absolute value; so the code is
- * interwoven with finding the abs value (temp) and output bits (temp2).
- */
- if (temp < 0) {
- temp = -temp; /* temp is abs value of input */
- temp >>= Al; /* apply the point transform */
- /* For a negative coef, want temp2 = bitwise complement of abs(coef) */
- temp2 = ~temp;
- } else {
- temp >>= Al; /* apply the point transform */
- temp2 = temp;
- }
- /* Watch out for case that nonzero coef is zero after point transform */
- if (temp == 0) {
- r++;
- continue;
- }
-
- /* Emit any pending EOBRUN */
- if (entropy->EOBRUN > 0)
- emit_eobrun(entropy);
- /* if run length > 15, must emit special run-length-16 codes (0xF0) */
- while (r > 15) {
- emit_symbol(entropy, entropy->ac_tbl_no, 0xF0);
- r -= 16;
- }
-
- /* Find the number of bits needed for the magnitude of the coefficient */
- nbits = 1; /* there must be at least one 1 bit */
- while ((temp >>= 1))
- nbits++;
- /* Check for out-of-range coefficient values */
- if (nbits > MAX_COEF_BITS)
- ERREXIT(cinfo, JERR_BAD_DCT_COEF);
-
- /* Count/emit Huffman symbol for run length / number of bits */
- emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits);
-
- /* Emit that number of bits of the value, if positive, */
- /* or the complement of its magnitude, if negative. */
- emit_bits(entropy, (unsigned int) temp2, nbits);
-
- r = 0; /* reset zero run length */
- }
-
- if (r > 0) { /* If there are trailing zeroes, */
- entropy->EOBRUN++; /* count an EOB */
- if (entropy->EOBRUN == 0x7FFF)
- emit_eobrun(entropy); /* force it out to avoid overflow */
- }
-
- cinfo->dest->next_output_byte = entropy->next_output_byte;
- cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
- /* Update restart-interval state too */
- if (cinfo->restart_interval) {
- if (entropy->restarts_to_go == 0) {
- entropy->restarts_to_go = cinfo->restart_interval;
- entropy->next_restart_num++;
- entropy->next_restart_num &= 7;
- }
- entropy->restarts_to_go--;
- }
-
- return TRUE;
-}
-
-
-/*
- * MCU encoding for DC successive approximation refinement scan.
- * Note: we assume such scans can be multi-component, although the spec
- * is not very clear on the point.
- */
-
-METHODDEF(boolean)
-encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
- register int temp;
- int blkn;
- int Al = cinfo->Al;
- JBLOCKROW block;
-
- entropy->next_output_byte = cinfo->dest->next_output_byte;
- entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
- /* Emit restart marker if needed */
- if (cinfo->restart_interval)
- if (entropy->restarts_to_go == 0)
- emit_restart(entropy, entropy->next_restart_num);
-
- /* Encode the MCU data blocks */
- for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
- block = MCU_data[blkn];
-
- /* We simply emit the Al'th bit of the DC coefficient value. */
- temp = (*block)[0];
- emit_bits(entropy, (unsigned int) (temp >> Al), 1);
- }
-
- cinfo->dest->next_output_byte = entropy->next_output_byte;
- cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
- /* Update restart-interval state too */
- if (cinfo->restart_interval) {
- if (entropy->restarts_to_go == 0) {
- entropy->restarts_to_go = cinfo->restart_interval;
- entropy->next_restart_num++;
- entropy->next_restart_num &= 7;
- }
- entropy->restarts_to_go--;
- }
-
- return TRUE;
-}
-
-
-/*
- * MCU encoding for AC successive approximation refinement scan.
- */
-
-METHODDEF(boolean)
-encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
- register int temp;
- register int r, k;
- int EOB;
- char *BR_buffer;
- unsigned int BR;
- int Se = cinfo->Se;
- int Al = cinfo->Al;
- JBLOCKROW block;
- int absvalues[DCTSIZE2];
-
- entropy->next_output_byte = cinfo->dest->next_output_byte;
- entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
- /* Emit restart marker if needed */
- if (cinfo->restart_interval)
- if (entropy->restarts_to_go == 0)
- emit_restart(entropy, entropy->next_restart_num);
-
- /* Encode the MCU data block */
- block = MCU_data[0];
-
- /* It is convenient to make a pre-pass to determine the transformed
- * coefficients' absolute values and the EOB position.
- */
- EOB = 0;
- for (k = cinfo->Ss; k <= Se; k++) {
- temp = (*block)[jpeg_natural_order[k]];
- /* We must apply the point transform by Al. For AC coefficients this
- * is an integer division with rounding towards 0. To do this portably
- * in C, we shift after obtaining the absolute value.
- */
- if (temp < 0)
- temp = -temp; /* temp is abs value of input */
- temp >>= Al; /* apply the point transform */
- absvalues[k] = temp; /* save abs value for main pass */
- if (temp == 1)
- EOB = k; /* EOB = index of last newly-nonzero coef */
- }
-
- /* Encode the AC coefficients per section G.1.2.3, fig. G.7 */
-
- r = 0; /* r = run length of zeros */
- BR = 0; /* BR = count of buffered bits added now */
- BR_buffer = entropy->bit_buffer + entropy->BE; /* Append bits to buffer */
-
- for (k = cinfo->Ss; k <= Se; k++) {
- if ((temp = absvalues[k]) == 0) {
- r++;
- continue;
- }
-
- /* Emit any required ZRLs, but not if they can be folded into EOB */
- while (r > 15 && k <= EOB) {
- /* emit any pending EOBRUN and the BE correction bits */
- emit_eobrun(entropy);
- /* Emit ZRL */
- emit_symbol(entropy, entropy->ac_tbl_no, 0xF0);
- r -= 16;
- /* Emit buffered correction bits that must be associated with ZRL */
- emit_buffered_bits(entropy, BR_buffer, BR);
- BR_buffer = entropy->bit_buffer; /* BE bits are gone now */
- BR = 0;
- }
-
- /* If the coef was previously nonzero, it only needs a correction bit.
- * NOTE: a straight translation of the spec's figure G.7 would suggest
- * that we also need to test r > 15. But if r > 15, we can only get here
- * if k > EOB, which implies that this coefficient is not 1.
- */
- if (temp > 1) {
- /* The correction bit is the next bit of the absolute value. */
- BR_buffer[BR++] = (char) (temp & 1);
- continue;
- }
-
- /* Emit any pending EOBRUN and the BE correction bits */
- emit_eobrun(entropy);
-
- /* Count/emit Huffman symbol for run length / number of bits */
- emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + 1);
-
- /* Emit output bit for newly-nonzero coef */
- temp = ((*block)[jpeg_natural_order[k]] < 0) ? 0 : 1;
- emit_bits(entropy, (unsigned int) temp, 1);
-
- /* Emit buffered correction bits that must be associated with this code */
- emit_buffered_bits(entropy, BR_buffer, BR);
- BR_buffer = entropy->bit_buffer; /* BE bits are gone now */
- BR = 0;
- r = 0; /* reset zero run length */
- }
-
- if (r > 0 || BR > 0) { /* If there are trailing zeroes, */
- entropy->EOBRUN++; /* count an EOB */
- entropy->BE += BR; /* concat my correction bits to older ones */
- /* We force out the EOB if we risk either:
- * 1. overflow of the EOB counter;
- * 2. overflow of the correction bit buffer during the next MCU.
- */
- if (entropy->EOBRUN == 0x7FFF || entropy->BE > (MAX_CORR_BITS-DCTSIZE2+1))
- emit_eobrun(entropy);
- }
-
- cinfo->dest->next_output_byte = entropy->next_output_byte;
- cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
- /* Update restart-interval state too */
- if (cinfo->restart_interval) {
- if (entropy->restarts_to_go == 0) {
- entropy->restarts_to_go = cinfo->restart_interval;
- entropy->next_restart_num++;
- entropy->next_restart_num &= 7;
- }
- entropy->restarts_to_go--;
- }
-
- return TRUE;
-}
-
-
-/*
- * Finish up at the end of a Huffman-compressed progressive scan.
- */
-
-METHODDEF(void)
-finish_pass_phuff (j_compress_ptr cinfo)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-
- entropy->next_output_byte = cinfo->dest->next_output_byte;
- entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
- /* Flush out any buffered data */
- emit_eobrun(entropy);
- flush_bits(entropy);
-
- cinfo->dest->next_output_byte = entropy->next_output_byte;
- cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-}
-
-
-/*
- * Finish up a statistics-gathering pass and create the new Huffman tables.
- */
-
-METHODDEF(void)
-finish_pass_gather_phuff (j_compress_ptr cinfo)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
- boolean is_DC_band;
- int ci, tbl;
- jpeg_component_info * compptr;
- JHUFF_TBL **htblptr;
- boolean did[NUM_HUFF_TBLS];
-
- /* Flush out buffered data (all we care about is counting the EOB symbol) */
- emit_eobrun(entropy);
-
- is_DC_band = (cinfo->Ss == 0);
-
- /* It's important not to apply jpeg_gen_optimal_table more than once
- * per table, because it clobbers the input frequency counts!
- */
- MEMZERO(did, SIZEOF(did));
-
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- if (is_DC_band) {
- if (cinfo->Ah != 0) /* DC refinement needs no table */
- continue;
- tbl = compptr->dc_tbl_no;
- } else {
- tbl = compptr->ac_tbl_no;
- }
- if (! did[tbl]) {
- if (is_DC_band)
- htblptr = & cinfo->dc_huff_tbl_ptrs[tbl];
- else
- htblptr = & cinfo->ac_huff_tbl_ptrs[tbl];
- if (*htblptr == NULL)
- *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
- jpeg_gen_optimal_table(cinfo, *htblptr, entropy->count_ptrs[tbl]);
- did[tbl] = TRUE;
- }
- }
-}
-
-
-/*
- * Module initialization routine for progressive Huffman entropy encoding.
- */
-
-GLOBAL(void)
-jinit_phuff_encoder (j_compress_ptr cinfo)
-{
- phuff_entropy_ptr entropy;
- int i;
-
- entropy = (phuff_entropy_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(phuff_entropy_encoder));
- cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
- entropy->pub.start_pass = start_pass_phuff;
-
- /* Mark tables unallocated */
- for (i = 0; i < NUM_HUFF_TBLS; i++) {
- entropy->derived_tbls[i] = NULL;
- entropy->count_ptrs[i] = NULL;
- }
- entropy->bit_buffer = NULL; /* needed only in AC refinement scan */
-}
-
-#endif /* C_PROGRESSIVE_SUPPORTED */
diff --git a/libjpegtwrp/jcprepct.c b/libjpegtwrp/jcprepct.c
deleted file mode 100644
index fa93333db..000000000
--- a/libjpegtwrp/jcprepct.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * jcprepct.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains the compression preprocessing controller.
- * This controller manages the color conversion, downsampling,
- * and edge expansion steps.
- *
- * Most of the complexity here is associated with buffering input rows
- * as required by the downsampler. See the comments at the head of
- * jcsample.c for the downsampler's needs.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* At present, jcsample.c can request context rows only for smoothing.
- * In the future, we might also need context rows for CCIR601 sampling
- * or other more-complex downsampling procedures. The code to support
- * context rows should be compiled only if needed.
- */
-#ifdef INPUT_SMOOTHING_SUPPORTED
-#define CONTEXT_ROWS_SUPPORTED
-#endif
-
-
-/*
- * For the simple (no-context-row) case, we just need to buffer one
- * row group's worth of pixels for the downsampling step. At the bottom of
- * the image, we pad to a full row group by replicating the last pixel row.
- * The downsampler's last output row is then replicated if needed to pad
- * out to a full iMCU row.
- *
- * When providing context rows, we must buffer three row groups' worth of
- * pixels. Three row groups are physically allocated, but the row pointer
- * arrays are made five row groups high, with the extra pointers above and
- * below "wrapping around" to point to the last and first real row groups.
- * This allows the downsampler to access the proper context rows.
- * At the top and bottom of the image, we create dummy context rows by
- * copying the first or last real pixel row. This copying could be avoided
- * by pointer hacking as is done in jdmainct.c, but it doesn't seem worth the
- * trouble on the compression side.
- */
-
-
-/* Private buffer controller object */
-
-typedef struct {
- struct jpeg_c_prep_controller pub; /* public fields */
-
- /* Downsampling input buffer. This buffer holds color-converted data
- * until we have enough to do a downsample step.
- */
- JSAMPARRAY color_buf[MAX_COMPONENTS];
-
- JDIMENSION rows_to_go; /* counts rows remaining in source image */
- int next_buf_row; /* index of next row to store in color_buf */
-
-#ifdef CONTEXT_ROWS_SUPPORTED /* only needed for context case */
- int this_row_group; /* starting row index of group to process */
- int next_buf_stop; /* downsample when we reach this index */
-#endif
-} my_prep_controller;
-
-typedef my_prep_controller * my_prep_ptr;
-
-
-/*
- * Initialize for a processing pass.
- */
-
-METHODDEF(void)
-start_pass_prep (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
-{
- my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
-
- if (pass_mode != JBUF_PASS_THRU)
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-
- /* Initialize total-height counter for detecting bottom of image */
- prep->rows_to_go = cinfo->image_height;
- /* Mark the conversion buffer empty */
- prep->next_buf_row = 0;
-#ifdef CONTEXT_ROWS_SUPPORTED
- /* Preset additional state variables for context mode.
- * These aren't used in non-context mode, so we needn't test which mode.
- */
- prep->this_row_group = 0;
- /* Set next_buf_stop to stop after two row groups have been read in. */
- prep->next_buf_stop = 2 * cinfo->max_v_samp_factor;
-#endif
-}
-
-
-/*
- * Expand an image vertically from height input_rows to height output_rows,
- * by duplicating the bottom row.
- */
-
-LOCAL(void)
-expand_bottom_edge (JSAMPARRAY image_data, JDIMENSION num_cols,
- int input_rows, int output_rows)
-{
- register int row;
-
- for (row = input_rows; row < output_rows; row++) {
- jcopy_sample_rows(image_data, input_rows-1, image_data, row,
- 1, num_cols);
- }
-}
-
-
-/*
- * Process some data in the simple no-context case.
- *
- * Preprocessor output data is counted in "row groups". A row group
- * is defined to be v_samp_factor sample rows of each component.
- * Downsampling will produce this much data from each max_v_samp_factor
- * input rows.
- */
-
-METHODDEF(void)
-pre_process_data (j_compress_ptr cinfo,
- JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
- JDIMENSION in_rows_avail,
- JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr,
- JDIMENSION out_row_groups_avail)
-{
- my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
- int numrows, ci;
- JDIMENSION inrows;
- jpeg_component_info * compptr;
-
- while (*in_row_ctr < in_rows_avail &&
- *out_row_group_ctr < out_row_groups_avail) {
- /* Do color conversion to fill the conversion buffer. */
- inrows = in_rows_avail - *in_row_ctr;
- numrows = cinfo->max_v_samp_factor - prep->next_buf_row;
- numrows = (int) MIN((JDIMENSION) numrows, inrows);
- (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr,
- prep->color_buf,
- (JDIMENSION) prep->next_buf_row,
- numrows);
- *in_row_ctr += numrows;
- prep->next_buf_row += numrows;
- prep->rows_to_go -= numrows;
- /* If at bottom of image, pad to fill the conversion buffer. */
- if (prep->rows_to_go == 0 &&
- prep->next_buf_row < cinfo->max_v_samp_factor) {
- for (ci = 0; ci < cinfo->num_components; ci++) {
- expand_bottom_edge(prep->color_buf[ci], cinfo->image_width,
- prep->next_buf_row, cinfo->max_v_samp_factor);
- }
- prep->next_buf_row = cinfo->max_v_samp_factor;
- }
- /* If we've filled the conversion buffer, empty it. */
- if (prep->next_buf_row == cinfo->max_v_samp_factor) {
- (*cinfo->downsample->downsample) (cinfo,
- prep->color_buf, (JDIMENSION) 0,
- output_buf, *out_row_group_ctr);
- prep->next_buf_row = 0;
- (*out_row_group_ctr)++;
- }
- /* If at bottom of image, pad the output to a full iMCU height.
- * Note we assume the caller is providing a one-iMCU-height output buffer!
- */
- if (prep->rows_to_go == 0 &&
- *out_row_group_ctr < out_row_groups_avail) {
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- expand_bottom_edge(output_buf[ci],
- compptr->width_in_blocks * DCTSIZE,
- (int) (*out_row_group_ctr * compptr->v_samp_factor),
- (int) (out_row_groups_avail * compptr->v_samp_factor));
- }
- *out_row_group_ctr = out_row_groups_avail;
- break; /* can exit outer loop without test */
- }
- }
-}
-
-
-#ifdef CONTEXT_ROWS_SUPPORTED
-
-/*
- * Process some data in the context case.
- */
-
-METHODDEF(void)
-pre_process_context (j_compress_ptr cinfo,
- JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
- JDIMENSION in_rows_avail,
- JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr,
- JDIMENSION out_row_groups_avail)
-{
- my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
- int numrows, ci;
- int buf_height = cinfo->max_v_samp_factor * 3;
- JDIMENSION inrows;
-
- while (*out_row_group_ctr < out_row_groups_avail) {
- if (*in_row_ctr < in_rows_avail) {
- /* Do color conversion to fill the conversion buffer. */
- inrows = in_rows_avail - *in_row_ctr;
- numrows = prep->next_buf_stop - prep->next_buf_row;
- numrows = (int) MIN((JDIMENSION) numrows, inrows);
- (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr,
- prep->color_buf,
- (JDIMENSION) prep->next_buf_row,
- numrows);
- /* Pad at top of image, if first time through */
- if (prep->rows_to_go == cinfo->image_height) {
- for (ci = 0; ci < cinfo->num_components; ci++) {
- int row;
- for (row = 1; row <= cinfo->max_v_samp_factor; row++) {
- jcopy_sample_rows(prep->color_buf[ci], 0,
- prep->color_buf[ci], -row,
- 1, cinfo->image_width);
- }
- }
- }
- *in_row_ctr += numrows;
- prep->next_buf_row += numrows;
- prep->rows_to_go -= numrows;
- } else {
- /* Return for more data, unless we are at the bottom of the image. */
- if (prep->rows_to_go != 0)
- break;
- /* When at bottom of image, pad to fill the conversion buffer. */
- if (prep->next_buf_row < prep->next_buf_stop) {
- for (ci = 0; ci < cinfo->num_components; ci++) {
- expand_bottom_edge(prep->color_buf[ci], cinfo->image_width,
- prep->next_buf_row, prep->next_buf_stop);
- }
- prep->next_buf_row = prep->next_buf_stop;
- }
- }
- /* If we've gotten enough data, downsample a row group. */
- if (prep->next_buf_row == prep->next_buf_stop) {
- (*cinfo->downsample->downsample) (cinfo,
- prep->color_buf,
- (JDIMENSION) prep->this_row_group,
- output_buf, *out_row_group_ctr);
- (*out_row_group_ctr)++;
- /* Advance pointers with wraparound as necessary. */
- prep->this_row_group += cinfo->max_v_samp_factor;
- if (prep->this_row_group >= buf_height)
- prep->this_row_group = 0;
- if (prep->next_buf_row >= buf_height)
- prep->next_buf_row = 0;
- prep->next_buf_stop = prep->next_buf_row + cinfo->max_v_samp_factor;
- }
- }
-}
-
-
-/*
- * Create the wrapped-around downsampling input buffer needed for context mode.
- */
-
-LOCAL(void)
-create_context_buffer (j_compress_ptr cinfo)
-{
- my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
- int rgroup_height = cinfo->max_v_samp_factor;
- int ci, i;
- jpeg_component_info * compptr;
- JSAMPARRAY true_buffer, fake_buffer;
-
- /* Grab enough space for fake row pointers for all the components;
- * we need five row groups' worth of pointers for each component.
- */
- fake_buffer = (JSAMPARRAY)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (cinfo->num_components * 5 * rgroup_height) *
- SIZEOF(JSAMPROW));
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- /* Allocate the actual buffer space (3 row groups) for this component.
- * We make the buffer wide enough to allow the downsampler to edge-expand
- * horizontally within the buffer, if it so chooses.
- */
- true_buffer = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE *
- cinfo->max_h_samp_factor) / compptr->h_samp_factor),
- (JDIMENSION) (3 * rgroup_height));
- /* Copy true buffer row pointers into the middle of the fake row array */
- MEMCOPY(fake_buffer + rgroup_height, true_buffer,
- 3 * rgroup_height * SIZEOF(JSAMPROW));
- /* Fill in the above and below wraparound pointers */
- for (i = 0; i < rgroup_height; i++) {
- fake_buffer[i] = true_buffer[2 * rgroup_height + i];
- fake_buffer[4 * rgroup_height + i] = true_buffer[i];
- }
- prep->color_buf[ci] = fake_buffer + rgroup_height;
- fake_buffer += 5 * rgroup_height; /* point to space for next component */
- }
-}
-
-#endif /* CONTEXT_ROWS_SUPPORTED */
-
-
-/*
- * Initialize preprocessing controller.
- */
-
-GLOBAL(void)
-jinit_c_prep_controller (j_compress_ptr cinfo, boolean need_full_buffer)
-{
- my_prep_ptr prep;
- int ci;
- jpeg_component_info * compptr;
-
- if (need_full_buffer) /* safety check */
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-
- prep = (my_prep_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_prep_controller));
- cinfo->prep = (struct jpeg_c_prep_controller *) prep;
- prep->pub.start_pass = start_pass_prep;
-
- /* Allocate the color conversion buffer.
- * We make the buffer wide enough to allow the downsampler to edge-expand
- * horizontally within the buffer, if it so chooses.
- */
- if (cinfo->downsample->need_context_rows) {
- /* Set up to provide context rows */
-#ifdef CONTEXT_ROWS_SUPPORTED
- prep->pub.pre_process_data = pre_process_context;
- create_context_buffer(cinfo);
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
- } else {
- /* No context, just make it tall enough for one row group */
- prep->pub.pre_process_data = pre_process_data;
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- prep->color_buf[ci] = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE *
- cinfo->max_h_samp_factor) / compptr->h_samp_factor),
- (JDIMENSION) cinfo->max_v_samp_factor);
- }
- }
-}
diff --git a/libjpegtwrp/jcsample.c b/libjpegtwrp/jcsample.c
deleted file mode 100644
index 212ec8757..000000000
--- a/libjpegtwrp/jcsample.c
+++ /dev/null
@@ -1,519 +0,0 @@
-/*
- * jcsample.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains downsampling routines.
- *
- * Downsampling input data is counted in "row groups". A row group
- * is defined to be max_v_samp_factor pixel rows of each component,
- * from which the downsampler produces v_samp_factor sample rows.
- * A single row group is processed in each call to the downsampler module.
- *
- * The downsampler is responsible for edge-expansion of its output data
- * to fill an integral number of DCT blocks horizontally. The source buffer
- * may be modified if it is helpful for this purpose (the source buffer is
- * allocated wide enough to correspond to the desired output width).
- * The caller (the prep controller) is responsible for vertical padding.
- *
- * The downsampler may request "context rows" by setting need_context_rows
- * during startup. In this case, the input arrays will contain at least
- * one row group's worth of pixels above and below the passed-in data;
- * the caller will create dummy rows at image top and bottom by replicating
- * the first or last real pixel row.
- *
- * An excellent reference for image resampling is
- * Digital Image Warping, George Wolberg, 1990.
- * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7.
- *
- * The downsampling algorithm used here is a simple average of the source
- * pixels covered by the output pixel. The hi-falutin sampling literature
- * refers to this as a "box filter". In general the characteristics of a box
- * filter are not very good, but for the specific cases we normally use (1:1
- * and 2:1 ratios) the box is equivalent to a "triangle filter" which is not
- * nearly so bad. If you intend to use other sampling ratios, you'd be well
- * advised to improve this code.
- *
- * A simple input-smoothing capability is provided. This is mainly intended
- * for cleaning up color-dithered GIF input files (if you find it inadequate,
- * we suggest using an external filtering program such as pnmconvol). When
- * enabled, each input pixel P is replaced by a weighted sum of itself and its
- * eight neighbors. P's weight is 1-8*SF and each neighbor's weight is SF,
- * where SF = (smoothing_factor / 1024).
- * Currently, smoothing is only supported for 2h2v sampling factors.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Pointer to routine to downsample a single component */
-typedef JMETHOD(void, downsample1_ptr,
- (j_compress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY input_data, JSAMPARRAY output_data));
-
-/* Private subobject */
-
-typedef struct {
- struct jpeg_downsampler pub; /* public fields */
-
- /* Downsampling method pointers, one per component */
- downsample1_ptr methods[MAX_COMPONENTS];
-} my_downsampler;
-
-typedef my_downsampler * my_downsample_ptr;
-
-
-/*
- * Initialize for a downsampling pass.
- */
-
-METHODDEF(void)
-start_pass_downsample (j_compress_ptr cinfo)
-{
- /* no work for now */
-}
-
-
-/*
- * Expand a component horizontally from width input_cols to width output_cols,
- * by duplicating the rightmost samples.
- */
-
-LOCAL(void)
-expand_right_edge (JSAMPARRAY image_data, int num_rows,
- JDIMENSION input_cols, JDIMENSION output_cols)
-{
- register JSAMPROW ptr;
- register JSAMPLE pixval;
- register int count;
- int row;
- int numcols = (int) (output_cols - input_cols);
-
- if (numcols > 0) {
- for (row = 0; row < num_rows; row++) {
- ptr = image_data[row] + input_cols;
- pixval = ptr[-1]; /* don't need GETJSAMPLE() here */
- for (count = numcols; count > 0; count--)
- *ptr++ = pixval;
- }
- }
-}
-
-
-/*
- * Do downsampling for a whole row group (all components).
- *
- * In this version we simply downsample each component independently.
- */
-
-METHODDEF(void)
-sep_downsample (j_compress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION in_row_index,
- JSAMPIMAGE output_buf, JDIMENSION out_row_group_index)
-{
- my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample;
- int ci;
- jpeg_component_info * compptr;
- JSAMPARRAY in_ptr, out_ptr;
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- in_ptr = input_buf[ci] + in_row_index;
- out_ptr = output_buf[ci] + (out_row_group_index * compptr->v_samp_factor);
- (*downsample->methods[ci]) (cinfo, compptr, in_ptr, out_ptr);
- }
-}
-
-
-/*
- * Downsample pixel values of a single component.
- * One row group is processed per call.
- * This version handles arbitrary integral sampling ratios, without smoothing.
- * Note that this version is not actually used for customary sampling ratios.
- */
-
-METHODDEF(void)
-int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY input_data, JSAMPARRAY output_data)
-{
- int inrow, outrow, h_expand, v_expand, numpix, numpix2, h, v;
- JDIMENSION outcol, outcol_h; /* outcol_h == outcol*h_expand */
- JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
- JSAMPROW inptr, outptr;
- INT32 outvalue;
-
- h_expand = cinfo->max_h_samp_factor / compptr->h_samp_factor;
- v_expand = cinfo->max_v_samp_factor / compptr->v_samp_factor;
- numpix = h_expand * v_expand;
- numpix2 = numpix/2;
-
- /* Expand input data enough to let all the output samples be generated
- * by the standard loop. Special-casing padded output would be more
- * efficient.
- */
- expand_right_edge(input_data, cinfo->max_v_samp_factor,
- cinfo->image_width, output_cols * h_expand);
-
- inrow = 0;
- for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
- outptr = output_data[outrow];
- for (outcol = 0, outcol_h = 0; outcol < output_cols;
- outcol++, outcol_h += h_expand) {
- outvalue = 0;
- for (v = 0; v < v_expand; v++) {
- inptr = input_data[inrow+v] + outcol_h;
- for (h = 0; h < h_expand; h++) {
- outvalue += (INT32) GETJSAMPLE(*inptr++);
- }
- }
- *outptr++ = (JSAMPLE) ((outvalue + numpix2) / numpix);
- }
- inrow += v_expand;
- }
-}
-
-
-/*
- * Downsample pixel values of a single component.
- * This version handles the special case of a full-size component,
- * without smoothing.
- */
-
-METHODDEF(void)
-fullsize_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY input_data, JSAMPARRAY output_data)
-{
- /* Copy the data */
- jcopy_sample_rows(input_data, 0, output_data, 0,
- cinfo->max_v_samp_factor, cinfo->image_width);
- /* Edge-expand */
- expand_right_edge(output_data, cinfo->max_v_samp_factor,
- cinfo->image_width, compptr->width_in_blocks * DCTSIZE);
-}
-
-
-/*
- * Downsample pixel values of a single component.
- * This version handles the common case of 2:1 horizontal and 1:1 vertical,
- * without smoothing.
- *
- * A note about the "bias" calculations: when rounding fractional values to
- * integer, we do not want to always round 0.5 up to the next integer.
- * If we did that, we'd introduce a noticeable bias towards larger values.
- * Instead, this code is arranged so that 0.5 will be rounded up or down at
- * alternate pixel locations (a simple ordered dither pattern).
- */
-
-METHODDEF(void)
-h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY input_data, JSAMPARRAY output_data)
-{
- int outrow;
- JDIMENSION outcol;
- JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
- register JSAMPROW inptr, outptr;
- register int bias;
-
- /* Expand input data enough to let all the output samples be generated
- * by the standard loop. Special-casing padded output would be more
- * efficient.
- */
- expand_right_edge(input_data, cinfo->max_v_samp_factor,
- cinfo->image_width, output_cols * 2);
-
- for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
- outptr = output_data[outrow];
- inptr = input_data[outrow];
- bias = 0; /* bias = 0,1,0,1,... for successive samples */
- for (outcol = 0; outcol < output_cols; outcol++) {
- *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr) + GETJSAMPLE(inptr[1])
- + bias) >> 1);
- bias ^= 1; /* 0=>1, 1=>0 */
- inptr += 2;
- }
- }
-}
-
-
-/*
- * Downsample pixel values of a single component.
- * This version handles the standard case of 2:1 horizontal and 2:1 vertical,
- * without smoothing.
- */
-
-METHODDEF(void)
-h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY input_data, JSAMPARRAY output_data)
-{
- int inrow, outrow;
- JDIMENSION outcol;
- JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
- register JSAMPROW inptr0, inptr1, outptr;
- register int bias;
-
- /* Expand input data enough to let all the output samples be generated
- * by the standard loop. Special-casing padded output would be more
- * efficient.
- */
- expand_right_edge(input_data, cinfo->max_v_samp_factor,
- cinfo->image_width, output_cols * 2);
-
- inrow = 0;
- for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
- outptr = output_data[outrow];
- inptr0 = input_data[inrow];
- inptr1 = input_data[inrow+1];
- bias = 1; /* bias = 1,2,1,2,... for successive samples */
- for (outcol = 0; outcol < output_cols; outcol++) {
- *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
- GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1])
- + bias) >> 2);
- bias ^= 3; /* 1=>2, 2=>1 */
- inptr0 += 2; inptr1 += 2;
- }
- inrow += 2;
- }
-}
-
-
-#ifdef INPUT_SMOOTHING_SUPPORTED
-
-/*
- * Downsample pixel values of a single component.
- * This version handles the standard case of 2:1 horizontal and 2:1 vertical,
- * with smoothing. One row of context is required.
- */
-
-METHODDEF(void)
-h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY input_data, JSAMPARRAY output_data)
-{
- int inrow, outrow;
- JDIMENSION colctr;
- JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
- register JSAMPROW inptr0, inptr1, above_ptr, below_ptr, outptr;
- INT32 membersum, neighsum, memberscale, neighscale;
-
- /* Expand input data enough to let all the output samples be generated
- * by the standard loop. Special-casing padded output would be more
- * efficient.
- */
- expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2,
- cinfo->image_width, output_cols * 2);
-
- /* We don't bother to form the individual "smoothed" input pixel values;
- * we can directly compute the output which is the average of the four
- * smoothed values. Each of the four member pixels contributes a fraction
- * (1-8*SF) to its own smoothed image and a fraction SF to each of the three
- * other smoothed pixels, therefore a total fraction (1-5*SF)/4 to the final
- * output. The four corner-adjacent neighbor pixels contribute a fraction
- * SF to just one smoothed pixel, or SF/4 to the final output; while the
- * eight edge-adjacent neighbors contribute SF to each of two smoothed
- * pixels, or SF/2 overall. In order to use integer arithmetic, these
- * factors are scaled by 2^16 = 65536.
- * Also recall that SF = smoothing_factor / 1024.
- */
-
- memberscale = 16384 - cinfo->smoothing_factor * 80; /* scaled (1-5*SF)/4 */
- neighscale = cinfo->smoothing_factor * 16; /* scaled SF/4 */
-
- inrow = 0;
- for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
- outptr = output_data[outrow];
- inptr0 = input_data[inrow];
- inptr1 = input_data[inrow+1];
- above_ptr = input_data[inrow-1];
- below_ptr = input_data[inrow+2];
-
- /* Special case for first column: pretend column -1 is same as column 0 */
- membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
- GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]);
- neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) +
- GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) +
- GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[2]) +
- GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[2]);
- neighsum += neighsum;
- neighsum += GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[2]) +
- GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[2]);
- membersum = membersum * memberscale + neighsum * neighscale;
- *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
- inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2;
-
- for (colctr = output_cols - 2; colctr > 0; colctr--) {
- /* sum of pixels directly mapped to this output element */
- membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
- GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]);
- /* sum of edge-neighbor pixels */
- neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) +
- GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) +
- GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[2]) +
- GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[2]);
- /* The edge-neighbors count twice as much as corner-neighbors */
- neighsum += neighsum;
- /* Add in the corner-neighbors */
- neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[2]) +
- GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[2]);
- /* form final output scaled up by 2^16 */
- membersum = membersum * memberscale + neighsum * neighscale;
- /* round, descale and output it */
- *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
- inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2;
- }
-
- /* Special case for last column */
- membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
- GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]);
- neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) +
- GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) +
- GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[1]) +
- GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[1]);
- neighsum += neighsum;
- neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[1]) +
- GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[1]);
- membersum = membersum * memberscale + neighsum * neighscale;
- *outptr = (JSAMPLE) ((membersum + 32768) >> 16);
-
- inrow += 2;
- }
-}
-
-
-/*
- * Downsample pixel values of a single component.
- * This version handles the special case of a full-size component,
- * with smoothing. One row of context is required.
- */
-
-METHODDEF(void)
-fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr,
- JSAMPARRAY input_data, JSAMPARRAY output_data)
-{
- int outrow;
- JDIMENSION colctr;
- JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
- register JSAMPROW inptr, above_ptr, below_ptr, outptr;
- INT32 membersum, neighsum, memberscale, neighscale;
- int colsum, lastcolsum, nextcolsum;
-
- /* Expand input data enough to let all the output samples be generated
- * by the standard loop. Special-casing padded output would be more
- * efficient.
- */
- expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2,
- cinfo->image_width, output_cols);
-
- /* Each of the eight neighbor pixels contributes a fraction SF to the
- * smoothed pixel, while the main pixel contributes (1-8*SF). In order
- * to use integer arithmetic, these factors are multiplied by 2^16 = 65536.
- * Also recall that SF = smoothing_factor / 1024.
- */
-
- memberscale = 65536L - cinfo->smoothing_factor * 512L; /* scaled 1-8*SF */
- neighscale = cinfo->smoothing_factor * 64; /* scaled SF */
-
- for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
- outptr = output_data[outrow];
- inptr = input_data[outrow];
- above_ptr = input_data[outrow-1];
- below_ptr = input_data[outrow+1];
-
- /* Special case for first column */
- colsum = GETJSAMPLE(*above_ptr++) + GETJSAMPLE(*below_ptr++) +
- GETJSAMPLE(*inptr);
- membersum = GETJSAMPLE(*inptr++);
- nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) +
- GETJSAMPLE(*inptr);
- neighsum = colsum + (colsum - membersum) + nextcolsum;
- membersum = membersum * memberscale + neighsum * neighscale;
- *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
- lastcolsum = colsum; colsum = nextcolsum;
-
- for (colctr = output_cols - 2; colctr > 0; colctr--) {
- membersum = GETJSAMPLE(*inptr++);
- above_ptr++; below_ptr++;
- nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) +
- GETJSAMPLE(*inptr);
- neighsum = lastcolsum + (colsum - membersum) + nextcolsum;
- membersum = membersum * memberscale + neighsum * neighscale;
- *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
- lastcolsum = colsum; colsum = nextcolsum;
- }
-
- /* Special case for last column */
- membersum = GETJSAMPLE(*inptr);
- neighsum = lastcolsum + (colsum - membersum) + colsum;
- membersum = membersum * memberscale + neighsum * neighscale;
- *outptr = (JSAMPLE) ((membersum + 32768) >> 16);
-
- }
-}
-
-#endif /* INPUT_SMOOTHING_SUPPORTED */
-
-
-/*
- * Module initialization routine for downsampling.
- * Note that we must select a routine for each component.
- */
-
-GLOBAL(void)
-jinit_downsampler (j_compress_ptr cinfo)
-{
- my_downsample_ptr downsample;
- int ci;
- jpeg_component_info * compptr;
- boolean smoothok = TRUE;
-
- downsample = (my_downsample_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_downsampler));
- cinfo->downsample = (struct jpeg_downsampler *) downsample;
- downsample->pub.start_pass = start_pass_downsample;
- downsample->pub.downsample = sep_downsample;
- downsample->pub.need_context_rows = FALSE;
-
- if (cinfo->CCIR601_sampling)
- ERREXIT(cinfo, JERR_CCIR601_NOTIMPL);
-
- /* Verify we can handle the sampling factors, and set up method pointers */
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- if (compptr->h_samp_factor == cinfo->max_h_samp_factor &&
- compptr->v_samp_factor == cinfo->max_v_samp_factor) {
-#ifdef INPUT_SMOOTHING_SUPPORTED
- if (cinfo->smoothing_factor) {
- downsample->methods[ci] = fullsize_smooth_downsample;
- downsample->pub.need_context_rows = TRUE;
- } else
-#endif
- downsample->methods[ci] = fullsize_downsample;
- } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor &&
- compptr->v_samp_factor == cinfo->max_v_samp_factor) {
- smoothok = FALSE;
- downsample->methods[ci] = h2v1_downsample;
- } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor &&
- compptr->v_samp_factor * 2 == cinfo->max_v_samp_factor) {
-#ifdef INPUT_SMOOTHING_SUPPORTED
- if (cinfo->smoothing_factor) {
- downsample->methods[ci] = h2v2_smooth_downsample;
- downsample->pub.need_context_rows = TRUE;
- } else
-#endif
- downsample->methods[ci] = h2v2_downsample;
- } else if ((cinfo->max_h_samp_factor % compptr->h_samp_factor) == 0 &&
- (cinfo->max_v_samp_factor % compptr->v_samp_factor) == 0) {
- smoothok = FALSE;
- downsample->methods[ci] = int_downsample;
- } else
- ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL);
- }
-
-#ifdef INPUT_SMOOTHING_SUPPORTED
- if (cinfo->smoothing_factor && !smoothok)
- TRACEMS(cinfo, 0, JTRC_SMOOTH_NOTIMPL);
-#endif
-}
diff --git a/libjpegtwrp/jctrans.c b/libjpegtwrp/jctrans.c
deleted file mode 100644
index f574ed14f..000000000
--- a/libjpegtwrp/jctrans.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * jctrans.c
- *
- * Copyright (C) 1995-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains library routines for transcoding compression,
- * that is, writing raw DCT coefficient arrays to an output JPEG file.
- * The routines in jcapimin.c will also be needed by a transcoder.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Forward declarations */
-LOCAL(void) transencode_master_selection
- JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays));
-LOCAL(void) transencode_coef_controller
- JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays));
-
-
-/*
- * Compression initialization for writing raw-coefficient data.
- * Before calling this, all parameters and a data destination must be set up.
- * Call jpeg_finish_compress() to actually write the data.
- *
- * The number of passed virtual arrays must match cinfo->num_components.
- * Note that the virtual arrays need not be filled or even realized at
- * the time write_coefficients is called; indeed, if the virtual arrays
- * were requested from this compression object's memory manager, they
- * typically will be realized during this routine and filled afterwards.
- */
-
-GLOBAL(void)
-jpeg_write_coefficients (j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)
-{
- if (cinfo->global_state != CSTATE_START)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- /* Mark all tables to be written */
- jpeg_suppress_tables(cinfo, FALSE);
- /* (Re)initialize error mgr and destination modules */
- (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
- (*cinfo->dest->init_destination) (cinfo);
- /* Perform master selection of active modules */
- transencode_master_selection(cinfo, coef_arrays);
- /* Wait for jpeg_finish_compress() call */
- cinfo->next_scanline = 0; /* so jpeg_write_marker works */
- cinfo->global_state = CSTATE_WRCOEFS;
-}
-
-
-/*
- * Initialize the compression object with default parameters,
- * then copy from the source object all parameters needed for lossless
- * transcoding. Parameters that can be varied without loss (such as
- * scan script and Huffman optimization) are left in their default states.
- */
-
-GLOBAL(void)
-jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
- j_compress_ptr dstinfo)
-{
- JQUANT_TBL ** qtblptr;
- jpeg_component_info *incomp, *outcomp;
- JQUANT_TBL *c_quant, *slot_quant;
- int tblno, ci, coefi;
-
- /* Safety check to ensure start_compress not called yet. */
- if (dstinfo->global_state != CSTATE_START)
- ERREXIT1(dstinfo, JERR_BAD_STATE, dstinfo->global_state);
- /* Copy fundamental image dimensions */
- dstinfo->image_width = srcinfo->image_width;
- dstinfo->image_height = srcinfo->image_height;
- dstinfo->input_components = srcinfo->num_components;
- dstinfo->in_color_space = srcinfo->jpeg_color_space;
- /* Initialize all parameters to default values */
- jpeg_set_defaults(dstinfo);
- /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB.
- * Fix it to get the right header markers for the image colorspace.
- */
- jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space);
- dstinfo->data_precision = srcinfo->data_precision;
- dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling;
- /* Copy the source's quantization tables. */
- for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) {
- if (srcinfo->quant_tbl_ptrs[tblno] != NULL) {
- qtblptr = & dstinfo->quant_tbl_ptrs[tblno];
- if (*qtblptr == NULL)
- *qtblptr = jpeg_alloc_quant_table((j_common_ptr) dstinfo);
- MEMCOPY((*qtblptr)->quantval,
- srcinfo->quant_tbl_ptrs[tblno]->quantval,
- SIZEOF((*qtblptr)->quantval));
- (*qtblptr)->sent_table = FALSE;
- }
- }
- /* Copy the source's per-component info.
- * Note we assume jpeg_set_defaults has allocated the dest comp_info array.
- */
- dstinfo->num_components = srcinfo->num_components;
- if (dstinfo->num_components < 1 || dstinfo->num_components > MAX_COMPONENTS)
- ERREXIT2(dstinfo, JERR_COMPONENT_COUNT, dstinfo->num_components,
- MAX_COMPONENTS);
- for (ci = 0, incomp = srcinfo->comp_info, outcomp = dstinfo->comp_info;
- ci < dstinfo->num_components; ci++, incomp++, outcomp++) {
- outcomp->component_id = incomp->component_id;
- outcomp->h_samp_factor = incomp->h_samp_factor;
- outcomp->v_samp_factor = incomp->v_samp_factor;
- outcomp->quant_tbl_no = incomp->quant_tbl_no;
- /* Make sure saved quantization table for component matches the qtable
- * slot. If not, the input file re-used this qtable slot.
- * IJG encoder currently cannot duplicate this.
- */
- tblno = outcomp->quant_tbl_no;
- if (tblno < 0 || tblno >= NUM_QUANT_TBLS ||
- srcinfo->quant_tbl_ptrs[tblno] == NULL)
- ERREXIT1(dstinfo, JERR_NO_QUANT_TABLE, tblno);
- slot_quant = srcinfo->quant_tbl_ptrs[tblno];
- c_quant = incomp->quant_table;
- if (c_quant != NULL) {
- for (coefi = 0; coefi < DCTSIZE2; coefi++) {
- if (c_quant->quantval[coefi] != slot_quant->quantval[coefi])
- ERREXIT1(dstinfo, JERR_MISMATCHED_QUANT_TABLE, tblno);
- }
- }
- /* Note: we do not copy the source's Huffman table assignments;
- * instead we rely on jpeg_set_colorspace to have made a suitable choice.
- */
- }
- /* Also copy JFIF version and resolution information, if available.
- * Strictly speaking this isn't "critical" info, but it's nearly
- * always appropriate to copy it if available. In particular,
- * if the application chooses to copy JFIF 1.02 extension markers from
- * the source file, we need to copy the version to make sure we don't
- * emit a file that has 1.02 extensions but a claimed version of 1.01.
- * We will *not*, however, copy version info from mislabeled "2.01" files.
- */
- if (srcinfo->saw_JFIF_marker) {
- if (srcinfo->JFIF_major_version == 1) {
- dstinfo->JFIF_major_version = srcinfo->JFIF_major_version;
- dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version;
- }
- dstinfo->density_unit = srcinfo->density_unit;
- dstinfo->X_density = srcinfo->X_density;
- dstinfo->Y_density = srcinfo->Y_density;
- }
-}
-
-
-/*
- * Master selection of compression modules for transcoding.
- * This substitutes for jcinit.c's initialization of the full compressor.
- */
-
-LOCAL(void)
-transencode_master_selection (j_compress_ptr cinfo,
- jvirt_barray_ptr * coef_arrays)
-{
- /* Although we don't actually use input_components for transcoding,
- * jcmaster.c's initial_setup will complain if input_components is 0.
- */
- cinfo->input_components = 1;
- /* Initialize master control (includes parameter checking/processing) */
- jinit_c_master_control(cinfo, TRUE /* transcode only */);
-
- /* Entropy encoding: either Huffman or arithmetic coding. */
- if (cinfo->arith_code) {
- ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
- } else {
- if (cinfo->progressive_mode) {
-#ifdef C_PROGRESSIVE_SUPPORTED
- jinit_phuff_encoder(cinfo);
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
- } else
- jinit_huff_encoder(cinfo);
- }
-
- /* We need a special coefficient buffer controller. */
- transencode_coef_controller(cinfo, coef_arrays);
-
- jinit_marker_writer(cinfo);
-
- /* We can now tell the memory manager to allocate virtual arrays. */
- (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
-
- /* Write the datastream header (SOI, JFIF) immediately.
- * Frame and scan headers are postponed till later.
- * This lets application insert special markers after the SOI.
- */
- (*cinfo->marker->write_file_header) (cinfo);
-}
-
-
-/*
- * The rest of this file is a special implementation of the coefficient
- * buffer controller. This is similar to jccoefct.c, but it handles only
- * output from presupplied virtual arrays. Furthermore, we generate any
- * dummy padding blocks on-the-fly rather than expecting them to be present
- * in the arrays.
- */
-
-/* Private buffer controller object */
-
-typedef struct {
- struct jpeg_c_coef_controller pub; /* public fields */
-
- JDIMENSION iMCU_row_num; /* iMCU row # within image */
- JDIMENSION mcu_ctr; /* counts MCUs processed in current row */
- int MCU_vert_offset; /* counts MCU rows within iMCU row */
- int MCU_rows_per_iMCU_row; /* number of such rows needed */
-
- /* Virtual block array for each component. */
- jvirt_barray_ptr * whole_image;
-
- /* Workspace for constructing dummy blocks at right/bottom edges. */
- JBLOCKROW dummy_buffer[C_MAX_BLOCKS_IN_MCU];
-} my_coef_controller;
-
-typedef my_coef_controller * my_coef_ptr;
-
-
-LOCAL(void)
-start_iMCU_row (j_compress_ptr cinfo)
-/* Reset within-iMCU-row counters for a new row */
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-
- /* In an interleaved scan, an MCU row is the same as an iMCU row.
- * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows.
- * But at the bottom of the image, process only what's left.
- */
- if (cinfo->comps_in_scan > 1) {
- coef->MCU_rows_per_iMCU_row = 1;
- } else {
- if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1))
- coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor;
- else
- coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height;
- }
-
- coef->mcu_ctr = 0;
- coef->MCU_vert_offset = 0;
-}
-
-
-/*
- * Initialize for a processing pass.
- */
-
-METHODDEF(void)
-start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-
- if (pass_mode != JBUF_CRANK_DEST)
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-
- coef->iMCU_row_num = 0;
- start_iMCU_row(cinfo);
-}
-
-
-/*
- * Process some data.
- * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
- * per call, ie, v_samp_factor block rows for each component in the scan.
- * The data is obtained from the virtual arrays and fed to the entropy coder.
- * Returns TRUE if the iMCU row is completed, FALSE if suspended.
- *
- * NB: input_buf is ignored; it is likely to be a NULL pointer.
- */
-
-METHODDEF(boolean)
-compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
- JDIMENSION MCU_col_num; /* index of current MCU within row */
- JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
- JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
- int blkn, ci, xindex, yindex, yoffset, blockcnt;
- JDIMENSION start_col;
- JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
- JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU];
- JBLOCKROW buffer_ptr;
- jpeg_component_info *compptr;
-
- /* Align the virtual buffers for the components used in this scan. */
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- buffer[ci] = (*cinfo->mem->access_virt_barray)
- ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index],
- coef->iMCU_row_num * compptr->v_samp_factor,
- (JDIMENSION) compptr->v_samp_factor, FALSE);
- }
-
- /* Loop to process one whole iMCU row */
- for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
- yoffset++) {
- for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row;
- MCU_col_num++) {
- /* Construct list of pointers to DCT blocks belonging to this MCU */
- blkn = 0; /* index of current DCT block within MCU */
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- start_col = MCU_col_num * compptr->MCU_width;
- blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
- : compptr->last_col_width;
- for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
- if (coef->iMCU_row_num < last_iMCU_row ||
- yindex+yoffset < compptr->last_row_height) {
- /* Fill in pointers to real blocks in this row */
- buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
- for (xindex = 0; xindex < blockcnt; xindex++)
- MCU_buffer[blkn++] = buffer_ptr++;
- } else {
- /* At bottom of image, need a whole row of dummy blocks */
- xindex = 0;
- }
- /* Fill in any dummy blocks needed in this row.
- * Dummy blocks are filled in the same way as in jccoefct.c:
- * all zeroes in the AC entries, DC entries equal to previous
- * block's DC value. The init routine has already zeroed the
- * AC entries, so we need only set the DC entries correctly.
- */
- for (; xindex < compptr->MCU_width; xindex++) {
- MCU_buffer[blkn] = coef->dummy_buffer[blkn];
- MCU_buffer[blkn][0][0] = MCU_buffer[blkn-1][0][0];
- blkn++;
- }
- }
- }
- /* Try to write the MCU. */
- if (! (*cinfo->entropy->encode_mcu) (cinfo, MCU_buffer)) {
- /* Suspension forced; update state counters and exit */
- coef->MCU_vert_offset = yoffset;
- coef->mcu_ctr = MCU_col_num;
-#ifdef NEEDS_ARM_ERRATA_754319_754320
- asm volatile ( "vmov s0,s0\n" );
-#endif
- return FALSE;
- }
- }
- /* Completed an MCU row, but perhaps not an iMCU row */
- coef->mcu_ctr = 0;
- }
- /* Completed the iMCU row, advance counters for next one */
- coef->iMCU_row_num++;
- start_iMCU_row(cinfo);
-#ifdef NEEDS_ARM_ERRATA_754319_754320
- asm volatile ( "vmov s0,s0\n" );
-#endif
-
- return TRUE;
-}
-
-
-/*
- * Initialize coefficient buffer controller.
- *
- * Each passed coefficient array must be the right size for that
- * coefficient: width_in_blocks wide and height_in_blocks high,
- * with unitheight at least v_samp_factor.
- */
-
-LOCAL(void)
-transencode_coef_controller (j_compress_ptr cinfo,
- jvirt_barray_ptr * coef_arrays)
-{
- my_coef_ptr coef;
- JBLOCKROW buffer;
- int i;
-
- coef = (my_coef_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_coef_controller));
- cinfo->coef = (struct jpeg_c_coef_controller *) coef;
- coef->pub.start_pass = start_pass_coef;
- coef->pub.compress_data = compress_output;
-
- /* Save pointer to virtual arrays */
- coef->whole_image = coef_arrays;
-
- /* Allocate and pre-zero space for dummy DCT blocks. */
- buffer = (JBLOCKROW)
- (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
- jzero_far((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
- for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) {
- coef->dummy_buffer[i] = buffer + i;
- }
-}
diff --git a/libjpegtwrp/jdapimin.c b/libjpegtwrp/jdapimin.c
deleted file mode 100644
index 5c9607ed5..000000000
--- a/libjpegtwrp/jdapimin.c
+++ /dev/null
@@ -1,401 +0,0 @@
-/*
- * jdapimin.c
- *
- * Copyright (C) 1994-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains application interface code for the decompression half
- * of the JPEG library. These are the "minimum" API routines that may be
- * needed in either the normal full-decompression case or the
- * transcoding-only case.
- *
- * Most of the routines intended to be called directly by an application
- * are in this file or in jdapistd.c. But also see jcomapi.c for routines
- * shared by compression and decompression, and jdtrans.c for the transcoding
- * case.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * Initialization of a JPEG decompression object.
- * The error manager must already be set up (in case memory manager fails).
- */
-
-GLOBAL(void)
-jpeg_CreateDecompress (j_decompress_ptr cinfo, int version, size_t structsize)
-{
- int i;
-
- /* Guard against version mismatches between library and caller. */
- cinfo->mem = NULL; /* so jpeg_destroy knows mem mgr not called */
- if (version != JPEG_LIB_VERSION)
- ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version);
- if (structsize != SIZEOF(struct jpeg_decompress_struct))
- ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE,
- (int) SIZEOF(struct jpeg_decompress_struct), (int) structsize);
-
- /* For debugging purposes, we zero the whole master structure.
- * But the application has already set the err pointer, and may have set
- * client_data, so we have to save and restore those fields.
- * Note: if application hasn't set client_data, tools like Purify may
- * complain here.
- */
- {
- struct jpeg_error_mgr * err = cinfo->err;
- void * client_data = cinfo->client_data; /* ignore Purify complaint here */
- MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct));
- cinfo->err = err;
- cinfo->client_data = client_data;
- }
- cinfo->is_decompressor = TRUE;
- cinfo->tile_decode = FALSE;
-
- /* Initialize a memory manager instance for this object */
- jinit_memory_mgr((j_common_ptr) cinfo);
-
- /* Zero out pointers to permanent structures. */
- cinfo->progress = NULL;
- cinfo->src = NULL;
-
- for (i = 0; i < NUM_QUANT_TBLS; i++)
- cinfo->quant_tbl_ptrs[i] = NULL;
-
- for (i = 0; i < NUM_HUFF_TBLS; i++) {
- cinfo->dc_huff_tbl_ptrs[i] = NULL;
- cinfo->ac_huff_tbl_ptrs[i] = NULL;
- }
-
- /* Initialize marker processor so application can override methods
- * for COM, APPn markers before calling jpeg_read_header.
- */
- cinfo->marker_list = NULL;
- jinit_marker_reader(cinfo);
-
- /* And initialize the overall input controller. */
- jinit_input_controller(cinfo);
-
- /* OK, I'm ready */
- cinfo->global_state = DSTATE_START;
-}
-
-
-/*
- * Destruction of a JPEG decompression object
- */
-
-GLOBAL(void)
-jpeg_destroy_decompress (j_decompress_ptr cinfo)
-{
- jpeg_destroy((j_common_ptr) cinfo); /* use common routine */
-}
-
-
-/*
- * Abort processing of a JPEG decompression operation,
- * but don't destroy the object itself.
- */
-
-GLOBAL(void)
-jpeg_abort_decompress (j_decompress_ptr cinfo)
-{
- jpeg_abort((j_common_ptr) cinfo); /* use common routine */
-}
-
-
-/*
- * Set default decompression parameters.
- */
-
-LOCAL(void)
-default_decompress_parms (j_decompress_ptr cinfo)
-{
- /* Guess the input colorspace, and set output colorspace accordingly. */
- /* (Wish JPEG committee had provided a real way to specify this...) */
- /* Note application may override our guesses. */
- switch (cinfo->num_components) {
- case 1:
- cinfo->jpeg_color_space = JCS_GRAYSCALE;
- cinfo->out_color_space = JCS_GRAYSCALE;
- break;
-
- case 3:
- if (cinfo->saw_JFIF_marker) {
- cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */
- } else if (cinfo->saw_Adobe_marker) {
- switch (cinfo->Adobe_transform) {
- case 0:
- cinfo->jpeg_color_space = JCS_RGB;
- break;
- case 1:
- cinfo->jpeg_color_space = JCS_YCbCr;
- break;
- default:
- WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform);
- cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */
- break;
- }
- } else {
- /* Saw no special markers, try to guess from the component IDs */
- int cid0 = cinfo->comp_info[0].component_id;
- int cid1 = cinfo->comp_info[1].component_id;
- int cid2 = cinfo->comp_info[2].component_id;
-
- if (cid0 == 1 && cid1 == 2 && cid2 == 3)
- cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */
- else if (cid0 == 82 && cid1 == 71 && cid2 == 66)
- cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */
- else {
- TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2);
- cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */
- }
- }
- /* Always guess RGB is proper output colorspace. */
- cinfo->out_color_space = JCS_RGB;
- break;
-
- case 4:
- if (cinfo->saw_Adobe_marker) {
- switch (cinfo->Adobe_transform) {
- case 0:
- cinfo->jpeg_color_space = JCS_CMYK;
- break;
- case 2:
- cinfo->jpeg_color_space = JCS_YCCK;
- break;
- default:
- WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform);
- cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */
- break;
- }
- } else {
- /* No special markers, assume straight CMYK. */
- cinfo->jpeg_color_space = JCS_CMYK;
- }
- cinfo->out_color_space = JCS_CMYK;
- break;
-
- default:
- cinfo->jpeg_color_space = JCS_UNKNOWN;
- cinfo->out_color_space = JCS_UNKNOWN;
- break;
- }
-
- /* Set defaults for other decompression parameters. */
- cinfo->scale_num = 1; /* 1:1 scaling */
- cinfo->scale_denom = 1;
- cinfo->output_gamma = 1.0;
- cinfo->buffered_image = FALSE;
- cinfo->raw_data_out = FALSE;
- cinfo->dct_method = JDCT_DEFAULT;
- cinfo->do_fancy_upsampling = TRUE;
- cinfo->do_block_smoothing = TRUE;
- cinfo->quantize_colors = FALSE;
- /* We set these in case application only sets quantize_colors. */
- cinfo->dither_mode = JDITHER_FS;
-#ifdef QUANT_2PASS_SUPPORTED
- cinfo->two_pass_quantize = TRUE;
-#else
- cinfo->two_pass_quantize = FALSE;
-#endif
- cinfo->desired_number_of_colors = 256;
- cinfo->colormap = NULL;
- /* Initialize for no mode change in buffered-image mode. */
- cinfo->enable_1pass_quant = FALSE;
- cinfo->enable_external_quant = FALSE;
- cinfo->enable_2pass_quant = FALSE;
-}
-
-
-/*
- * Decompression startup: read start of JPEG datastream to see what's there.
- * Need only initialize JPEG object and supply a data source before calling.
- *
- * This routine will read as far as the first SOS marker (ie, actual start of
- * compressed data), and will save all tables and parameters in the JPEG
- * object. It will also initialize the decompression parameters to default
- * values, and finally return JPEG_HEADER_OK. On return, the application may
- * adjust the decompression parameters and then call jpeg_start_decompress.
- * (Or, if the application only wanted to determine the image parameters,
- * the data need not be decompressed. In that case, call jpeg_abort or
- * jpeg_destroy to release any temporary space.)
- * If an abbreviated (tables only) datastream is presented, the routine will
- * return JPEG_HEADER_TABLES_ONLY upon reaching EOI. The application may then
- * re-use the JPEG object to read the abbreviated image datastream(s).
- * It is unnecessary (but OK) to call jpeg_abort in this case.
- * The JPEG_SUSPENDED return code only occurs if the data source module
- * requests suspension of the decompressor. In this case the application
- * should load more source data and then re-call jpeg_read_header to resume
- * processing.
- * If a non-suspending data source is used and require_image is TRUE, then the
- * return code need not be inspected since only JPEG_HEADER_OK is possible.
- *
- * This routine is now just a front end to jpeg_consume_input, with some
- * extra error checking.
- */
-
-GLOBAL(int)
-jpeg_read_header (j_decompress_ptr cinfo, boolean require_image)
-{
- int retcode;
-
- if (cinfo->global_state != DSTATE_START &&
- cinfo->global_state != DSTATE_INHEADER)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
- retcode = jpeg_consume_input(cinfo);
-
- switch (retcode) {
- case JPEG_REACHED_SOS:
- retcode = JPEG_HEADER_OK;
- break;
- case JPEG_REACHED_EOI:
- if (require_image) /* Complain if application wanted an image */
- ERREXIT(cinfo, JERR_NO_IMAGE);
- /* Reset to start state; it would be safer to require the application to
- * call jpeg_abort, but we can't change it now for compatibility reasons.
- * A side effect is to free any temporary memory (there shouldn't be any).
- */
- jpeg_abort((j_common_ptr) cinfo); /* sets state = DSTATE_START */
- retcode = JPEG_HEADER_TABLES_ONLY;
- break;
- case JPEG_SUSPENDED:
- /* no work */
- break;
- }
-
- return retcode;
-}
-
-
-/*
- * Consume data in advance of what the decompressor requires.
- * This can be called at any time once the decompressor object has
- * been created and a data source has been set up.
- *
- * This routine is essentially a state machine that handles a couple
- * of critical state-transition actions, namely initial setup and
- * transition from header scanning to ready-for-start_decompress.
- * All the actual input is done via the input controller's consume_input
- * method.
- */
-
-GLOBAL(int)
-jpeg_consume_input (j_decompress_ptr cinfo)
-{
- int retcode = JPEG_SUSPENDED;
-
- /* NB: every possible DSTATE value should be listed in this switch */
- switch (cinfo->global_state) {
- case DSTATE_START:
- /* Start-of-datastream actions: reset appropriate modules */
- (*cinfo->inputctl->reset_input_controller) (cinfo);
- /* Initialize application's data source module */
- (*cinfo->src->init_source) (cinfo);
- cinfo->global_state = DSTATE_INHEADER;
- /*FALLTHROUGH*/
- case DSTATE_INHEADER:
- retcode = (*cinfo->inputctl->consume_input) (cinfo);
- if (retcode == JPEG_REACHED_SOS) { /* Found SOS, prepare to decompress */
- /* Set up default parameters based on header data */
- default_decompress_parms(cinfo);
- /* Set global state: ready for start_decompress */
- cinfo->global_state = DSTATE_READY;
- }
- break;
- case DSTATE_READY:
- /* Can't advance past first SOS until start_decompress is called */
- retcode = JPEG_REACHED_SOS;
- break;
- case DSTATE_PRELOAD:
- case DSTATE_PRESCAN:
- case DSTATE_SCANNING:
- case DSTATE_RAW_OK:
- case DSTATE_BUFIMAGE:
- case DSTATE_BUFPOST:
- case DSTATE_STOPPING:
- retcode = (*cinfo->inputctl->consume_input) (cinfo);
- break;
- default:
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- }
- return retcode;
-}
-
-
-/*
- * Have we finished reading the input file?
- */
-
-GLOBAL(boolean)
-jpeg_input_complete (j_decompress_ptr cinfo)
-{
- /* Check for valid jpeg object */
- if (cinfo->global_state < DSTATE_START ||
- cinfo->global_state > DSTATE_STOPPING)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- return cinfo->inputctl->eoi_reached;
-}
-
-
-/*
- * Is there more than one scan?
- */
-
-GLOBAL(boolean)
-jpeg_has_multiple_scans (j_decompress_ptr cinfo)
-{
- /* Only valid after jpeg_read_header completes */
- if (cinfo->global_state < DSTATE_READY ||
- cinfo->global_state > DSTATE_STOPPING)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- return cinfo->inputctl->has_multiple_scans;
-}
-
-
-/*
- * Finish JPEG decompression.
- *
- * This will normally just verify the file trailer and release temp storage.
- *
- * Returns FALSE if suspended. The return value need be inspected only if
- * a suspending data source is used.
- */
-
-GLOBAL(boolean)
-jpeg_finish_decompress (j_decompress_ptr cinfo)
-{
- if ((cinfo->global_state == DSTATE_SCANNING ||
- cinfo->global_state == DSTATE_RAW_OK) && ! cinfo->buffered_image) {
- /* Terminate final pass of non-buffered mode */
-#ifdef ANDROID_TILE_BASED_DECODE
- cinfo->output_scanline = cinfo->output_height;
-#endif
- if (cinfo->output_scanline < cinfo->output_height)
- ERREXIT(cinfo, JERR_TOO_LITTLE_DATA);
- (*cinfo->master->finish_output_pass) (cinfo);
- cinfo->global_state = DSTATE_STOPPING;
- } else if (cinfo->global_state == DSTATE_BUFIMAGE) {
- /* Finishing after a buffered-image operation */
- cinfo->global_state = DSTATE_STOPPING;
- } else if (cinfo->global_state != DSTATE_STOPPING) {
- /* STOPPING = repeat call after a suspension, anything else is error */
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- }
- /* Read until EOI */
-#ifndef ANDROID_TILE_BASED_DECODE
- while (! cinfo->inputctl->eoi_reached) {
- if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED)
- return FALSE; /* Suspend, come back later */
- }
-#endif
- /* Do final cleanup */
- (*cinfo->src->term_source) (cinfo);
- /* We can use jpeg_abort to release memory and reset global_state */
- jpeg_abort((j_common_ptr) cinfo);
- return TRUE;
-}
diff --git a/libjpegtwrp/jdapistd.c b/libjpegtwrp/jdapistd.c
deleted file mode 100644
index e1233df36..000000000
--- a/libjpegtwrp/jdapistd.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/*
- * jdapistd.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains application interface code for the decompression half
- * of the JPEG library. These are the "standard" API routines that are
- * used in the normal full-decompression case. They are not used by a
- * transcoding-only application. Note that if an application links in
- * jpeg_start_decompress, it will end up linking in the entire decompressor.
- * We thus must separate this file from jdapimin.c to avoid linking the
- * whole decompression library into a transcoder.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Forward declarations */
-LOCAL(boolean) output_pass_setup JPP((j_decompress_ptr cinfo));
-
-
-/*
- * Decompression initialization.
- * jpeg_read_header must be completed before calling this.
- *
- * If a multipass operating mode was selected, this will do all but the
- * last pass, and thus may take a great deal of time.
- *
- * Returns FALSE if suspended. The return value need be inspected only if
- * a suspending data source is used.
- */
-
-GLOBAL(boolean)
-jpeg_start_decompress (j_decompress_ptr cinfo)
-{
- if (cinfo->global_state == DSTATE_READY) {
- /* First call: initialize master control, select active modules */
- jinit_master_decompress(cinfo);
- if (cinfo->buffered_image) {
- /* No more work here; expecting jpeg_start_output next */
- cinfo->global_state = DSTATE_BUFIMAGE;
- return TRUE;
- }
- cinfo->global_state = DSTATE_PRELOAD;
- }
- if (cinfo->global_state == DSTATE_PRELOAD) {
- /* If file has multiple scans, absorb them all into the coef buffer */
- if (cinfo->inputctl->has_multiple_scans) {
-#ifdef D_MULTISCAN_FILES_SUPPORTED
- for (;;) {
- int retcode;
- /* Call progress monitor hook if present */
- if (cinfo->progress != NULL)
- (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
- /* Absorb some more input */
- retcode = (*cinfo->inputctl->consume_input) (cinfo);
- if (retcode == JPEG_SUSPENDED)
- return FALSE;
- if (retcode == JPEG_REACHED_EOI)
- break;
- /* Advance progress counter if appropriate */
- if (cinfo->progress != NULL &&
- (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) {
- if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) {
- /* jdmaster underestimated number of scans; ratchet up one scan */
- cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows;
- }
- }
- }
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif /* D_MULTISCAN_FILES_SUPPORTED */
- }
- cinfo->output_scan_number = cinfo->input_scan_number;
- } else if (cinfo->global_state != DSTATE_PRESCAN)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- /* Perform any dummy output passes, and set up for the final pass */
- return output_pass_setup(cinfo);
-}
-
-/*
- * Tile decompression initialization.
- * jpeg_read_header must be completed before calling this.
- */
-
-GLOBAL(boolean)
-jpeg_start_tile_decompress (j_decompress_ptr cinfo)
-{
- if (cinfo->global_state == DSTATE_READY) {
- /* First call: initialize master control, select active modules */
- cinfo->tile_decode = TRUE;
- jinit_master_decompress(cinfo);
- if (cinfo->buffered_image) {
- cinfo->global_state = DSTATE_BUFIMAGE;
- return TRUE;
- }
- cinfo->global_state = DSTATE_PRELOAD;
- }
- if (cinfo->global_state == DSTATE_PRELOAD) {
- cinfo->output_scan_number = cinfo->input_scan_number;
- } else if (cinfo->global_state != DSTATE_PRESCAN)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- /* Perform any dummy output passes, and set up for the final pass */
- return output_pass_setup(cinfo);
-}
-
-
-/*
- * Set up for an output pass, and perform any dummy pass(es) needed.
- * Common subroutine for jpeg_start_decompress and jpeg_start_output.
- * Entry: global_state = DSTATE_PRESCAN only if previously suspended.
- * Exit: If done, returns TRUE and sets global_state for proper output mode.
- * If suspended, returns FALSE and sets global_state = DSTATE_PRESCAN.
- */
-
-LOCAL(boolean)
-output_pass_setup (j_decompress_ptr cinfo)
-{
- if (cinfo->global_state != DSTATE_PRESCAN) {
- /* First call: do pass setup */
- (*cinfo->master->prepare_for_output_pass) (cinfo);
- cinfo->output_scanline = 0;
- cinfo->global_state = DSTATE_PRESCAN;
- }
- /* Loop over any required dummy passes */
- while (cinfo->master->is_dummy_pass) {
-#ifdef QUANT_2PASS_SUPPORTED
- /* Crank through the dummy pass */
- while (cinfo->output_scanline < cinfo->output_height) {
- JDIMENSION last_scanline;
- /* Call progress monitor hook if present */
- if (cinfo->progress != NULL) {
- cinfo->progress->pass_counter = (long) cinfo->output_scanline;
- cinfo->progress->pass_limit = (long) cinfo->output_height;
- (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
- }
- /* Process some data */
- last_scanline = cinfo->output_scanline;
- (*cinfo->main->process_data) (cinfo, (JSAMPARRAY) NULL,
- &cinfo->output_scanline, (JDIMENSION) 0);
- if (cinfo->output_scanline == last_scanline)
- return FALSE; /* No progress made, must suspend */
- }
- /* Finish up dummy pass, and set up for another one */
- (*cinfo->master->finish_output_pass) (cinfo);
- (*cinfo->master->prepare_for_output_pass) (cinfo);
- cinfo->output_scanline = 0;
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif /* QUANT_2PASS_SUPPORTED */
- }
- /* Ready for application to drive output pass through
- * jpeg_read_scanlines or jpeg_read_raw_data.
- */
- cinfo->global_state = cinfo->raw_data_out ? DSTATE_RAW_OK : DSTATE_SCANNING;
- return TRUE;
-}
-
-
-/*
- * Read some scanlines of data from the JPEG decompressor.
- *
- * The return value will be the number of lines actually read.
- * This may be less than the number requested in several cases,
- * including bottom of image, data source suspension, and operating
- * modes that emit multiple scanlines at a time.
- *
- * Note: we warn about excess calls to jpeg_read_scanlines() since
- * this likely signals an application programmer error. However,
- * an oversize buffer (max_lines > scanlines remaining) is not an error.
- */
-
-GLOBAL(JDIMENSION)
-jpeg_read_scanlines (j_decompress_ptr cinfo, JSAMPARRAY scanlines,
- JDIMENSION max_lines)
-{
- JDIMENSION row_ctr;
-
- if (cinfo->global_state != DSTATE_SCANNING)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- if (cinfo->output_scanline >= cinfo->output_height) {
- WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
- return 0;
- }
-
- /* Call progress monitor hook if present */
- if (cinfo->progress != NULL) {
- cinfo->progress->pass_counter = (long) cinfo->output_scanline;
- cinfo->progress->pass_limit = (long) cinfo->output_height;
- (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
- }
-
- /* Process some data */
- row_ctr = 0;
- (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, max_lines);
- cinfo->output_scanline += row_ctr;
- return row_ctr;
-}
-/*
- * Initialize the jpeg decoder to decompressing a rectangle with size of (width, height)
- * and its upper-left corner located at (start_x, start_y).
- * Align start_x and start_y to multiplies of iMCU width and height, respectively.
- * Also, the new reader position and sampled image size will be returned in
- * (start_x, start_y) and (width, height), respectively.
- */
-
-GLOBAL(void)
-jpeg_init_read_tile_scanline(j_decompress_ptr cinfo, huffman_index *index,
- int *start_x, int *start_y, int *width, int *height)
-{
- // Calculates the boundary of iMCU
- int lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE;
- int lines_per_iMCU_col = cinfo->max_h_samp_factor * DCTSIZE;
- int row_offset = *start_y / lines_per_iMCU_row;
- int col_left_boundary = ((*start_x / lines_per_iMCU_col)
- / index->MCU_sample_size) * index->MCU_sample_size;
- int col_right_boundary =
- jdiv_round_up(*start_x + *width, lines_per_iMCU_col);
-
- cinfo->coef->MCU_columns_to_skip =
- *start_x / lines_per_iMCU_col - col_left_boundary;
-
- *height = (*start_y - row_offset * lines_per_iMCU_row) + *height;
- *start_x = col_left_boundary * lines_per_iMCU_col;
- *start_y = row_offset * lines_per_iMCU_row;
- cinfo->image_width = jmin(cinfo->original_image_width,
- col_right_boundary * lines_per_iMCU_col) -
- col_left_boundary * lines_per_iMCU_col;
- cinfo->input_iMCU_row = row_offset;
- cinfo->output_iMCU_row = row_offset;
-
- // Updates JPEG decoder parameter
- jinit_color_deconverter(cinfo);
- jpeg_calc_output_dimensions(cinfo);
- jinit_upsampler(cinfo);
- (*cinfo->master->prepare_for_output_pass) (cinfo);
- if (cinfo->progressive_mode)
- (*cinfo->entropy->start_pass) (cinfo);
- else
- jpeg_decompress_per_scan_setup(cinfo);
-
- int sample_size = DCTSIZE / cinfo->min_DCT_scaled_size;
-
- *height = jdiv_round_up(*height, sample_size);
- *width = cinfo->output_width;
- cinfo->output_scanline = lines_per_iMCU_row * row_offset / sample_size;
- cinfo->inputctl->consume_input = cinfo->coef->consume_data;
- cinfo->inputctl->consume_input_build_huffman_index =
- cinfo->coef->consume_data_build_huffman_index;
- cinfo->entropy->index = index;
- cinfo->input_iMCU_row = row_offset;
- cinfo->output_iMCU_row = row_offset;
- cinfo->coef->MCU_column_left_boundary = col_left_boundary;
- cinfo->coef->MCU_column_right_boundary = col_right_boundary;
- cinfo->coef->column_left_boundary =
- col_left_boundary / index->MCU_sample_size;
- cinfo->coef->column_right_boundary =
- jdiv_round_up(col_right_boundary, index->MCU_sample_size);
-}
-
-/*
- * Read a scanline from the current position.
- *
- * Return the number of lines actually read.
- */
-
-GLOBAL(JDIMENSION)
-jpeg_read_tile_scanline (j_decompress_ptr cinfo, huffman_index *index,
- JSAMPARRAY scanlines)
-{
- // Calculates the boundary of iMCU
- int lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE;
- int lines_per_iMCU_col = cinfo->max_h_samp_factor * DCTSIZE;
- int sample_size = DCTSIZE / cinfo->min_DCT_scaled_size;
- JDIMENSION row_ctr = 0;
-
- if (cinfo->progressive_mode) {
- (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, 1);
- } else {
- if (cinfo->output_scanline % (lines_per_iMCU_row / sample_size) == 0) {
- // Set the read head to the next iMCU row
- int iMCU_row_offset = cinfo->output_scanline /
- (lines_per_iMCU_row / sample_size);
- int offset_data_col_position = cinfo->coef->MCU_column_left_boundary /
- index->MCU_sample_size;
- huffman_offset_data offset_data =
- index->scan[0].offset[iMCU_row_offset][offset_data_col_position];
- (*cinfo->entropy->configure_huffman_decoder) (cinfo, offset_data);
- }
- (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, 1);
- }
-
- cinfo->output_scanline += row_ctr;
- return row_ctr;
-}
-
-/*
- * Alternate entry point to read raw data.
- * Processes exactly one iMCU row per call, unless suspended.
- */
-
-GLOBAL(JDIMENSION)
-jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data,
- JDIMENSION max_lines)
-{
- JDIMENSION lines_per_iMCU_row;
-
- if (cinfo->global_state != DSTATE_RAW_OK)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- if (cinfo->output_scanline >= cinfo->output_height) {
- WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
- return 0;
- }
-
- /* Call progress monitor hook if present */
- if (cinfo->progress != NULL) {
- cinfo->progress->pass_counter = (long) cinfo->output_scanline;
- cinfo->progress->pass_limit = (long) cinfo->output_height;
- (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
- }
-
- /* Verify that at least one iMCU row can be returned. */
- lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size;
- if (max_lines < lines_per_iMCU_row)
- ERREXIT(cinfo, JERR_BUFFER_SIZE);
-
- /* Decompress directly into user's buffer. */
- if (! (*cinfo->coef->decompress_data) (cinfo, data))
- return 0; /* suspension forced, can do nothing more */
-
- /* OK, we processed one iMCU row. */
- cinfo->output_scanline += lines_per_iMCU_row;
- return lines_per_iMCU_row;
-}
-
-
-/* Additional entry points for buffered-image mode. */
-
-#ifdef D_MULTISCAN_FILES_SUPPORTED
-
-/*
- * Initialize for an output pass in buffered-image mode.
- */
-
-GLOBAL(boolean)
-jpeg_start_output (j_decompress_ptr cinfo, int scan_number)
-{
- if (cinfo->global_state != DSTATE_BUFIMAGE &&
- cinfo->global_state != DSTATE_PRESCAN)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- /* Limit scan number to valid range */
- if (scan_number <= 0)
- scan_number = 1;
- if (cinfo->inputctl->eoi_reached &&
- scan_number > cinfo->input_scan_number)
- scan_number = cinfo->input_scan_number;
- cinfo->output_scan_number = scan_number;
- /* Perform any dummy output passes, and set up for the real pass */
- return output_pass_setup(cinfo);
-}
-
-
-/*
- * Finish up after an output pass in buffered-image mode.
- *
- * Returns FALSE if suspended. The return value need be inspected only if
- * a suspending data source is used.
- */
-
-GLOBAL(boolean)
-jpeg_finish_output (j_decompress_ptr cinfo)
-{
- if ((cinfo->global_state == DSTATE_SCANNING ||
- cinfo->global_state == DSTATE_RAW_OK) && cinfo->buffered_image) {
- /* Terminate this pass. */
- /* We do not require the whole pass to have been completed. */
- (*cinfo->master->finish_output_pass) (cinfo);
- cinfo->global_state = DSTATE_BUFPOST;
- } else if (cinfo->global_state != DSTATE_BUFPOST) {
- /* BUFPOST = repeat call after a suspension, anything else is error */
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- }
- /* Read markers looking for SOS or EOI */
- while (cinfo->input_scan_number <= cinfo->output_scan_number &&
- ! cinfo->inputctl->eoi_reached) {
- if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED)
- return FALSE; /* Suspend, come back later */
- }
- cinfo->global_state = DSTATE_BUFIMAGE;
- return TRUE;
-}
-
-#endif /* D_MULTISCAN_FILES_SUPPORTED */
diff --git a/libjpegtwrp/jdatadst.c b/libjpegtwrp/jdatadst.c
deleted file mode 100644
index a8f6fb0e0..000000000
--- a/libjpegtwrp/jdatadst.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * jdatadst.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains compression data destination routines for the case of
- * emitting JPEG data to a file (or any stdio stream). While these routines
- * are sufficient for most applications, some will want to use a different
- * destination manager.
- * IMPORTANT: we assume that fwrite() will correctly transcribe an array of
- * JOCTETs into 8-bit-wide elements on external storage. If char is wider
- * than 8 bits on your machine, you may need to do some tweaking.
- */
-
-/* this is not a core library module, so it doesn't define JPEG_INTERNALS */
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jerror.h"
-
-
-/* Expanded data destination object for stdio output */
-
-typedef struct {
- struct jpeg_destination_mgr pub; /* public fields */
-
- FILE * outfile; /* target stream */
- JOCTET * buffer; /* start of buffer */
-} my_destination_mgr;
-
-typedef my_destination_mgr * my_dest_ptr;
-
-#define OUTPUT_BUF_SIZE 4096 /* choose an efficiently fwrite'able size */
-
-
-/*
- * Initialize destination --- called by jpeg_start_compress
- * before any data is actually written.
- */
-
-METHODDEF(void)
-init_destination (j_compress_ptr cinfo)
-{
- my_dest_ptr dest = (my_dest_ptr) cinfo->dest;
-
- /* Allocate the output buffer --- it will be released when done with image */
- dest->buffer = (JOCTET *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- OUTPUT_BUF_SIZE * SIZEOF(JOCTET));
-
- dest->pub.next_output_byte = dest->buffer;
- dest->pub.free_in_buffer = OUTPUT_BUF_SIZE;
-}
-
-
-/*
- * Empty the output buffer --- called whenever buffer fills up.
- *
- * In typical applications, this should write the entire output buffer
- * (ignoring the current state of next_output_byte & free_in_buffer),
- * reset the pointer & count to the start of the buffer, and return TRUE
- * indicating that the buffer has been dumped.
- *
- * In applications that need to be able to suspend compression due to output
- * overrun, a FALSE return indicates that the buffer cannot be emptied now.
- * In this situation, the compressor will return to its caller (possibly with
- * an indication that it has not accepted all the supplied scanlines). The
- * application should resume compression after it has made more room in the
- * output buffer. Note that there are substantial restrictions on the use of
- * suspension --- see the documentation.
- *
- * When suspending, the compressor will back up to a convenient restart point
- * (typically the start of the current MCU). next_output_byte & free_in_buffer
- * indicate where the restart point will be if the current call returns FALSE.
- * Data beyond this point will be regenerated after resumption, so do not
- * write it out when emptying the buffer externally.
- */
-
-METHODDEF(boolean)
-empty_output_buffer (j_compress_ptr cinfo)
-{
- my_dest_ptr dest = (my_dest_ptr) cinfo->dest;
-
- if (JFWRITE(dest->outfile, dest->buffer, OUTPUT_BUF_SIZE) !=
- (size_t) OUTPUT_BUF_SIZE)
- ERREXIT(cinfo, JERR_FILE_WRITE);
-
- dest->pub.next_output_byte = dest->buffer;
- dest->pub.free_in_buffer = OUTPUT_BUF_SIZE;
-
- return TRUE;
-}
-
-
-/*
- * Terminate destination --- called by jpeg_finish_compress
- * after all data has been written. Usually needs to flush buffer.
- *
- * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding
- * application must deal with any cleanup that should happen even
- * for error exit.
- */
-
-METHODDEF(void)
-term_destination (j_compress_ptr cinfo)
-{
- my_dest_ptr dest = (my_dest_ptr) cinfo->dest;
- size_t datacount = OUTPUT_BUF_SIZE - dest->pub.free_in_buffer;
-
- /* Write any data remaining in the buffer */
- if (datacount > 0) {
- if (JFWRITE(dest->outfile, dest->buffer, datacount) != datacount)
- ERREXIT(cinfo, JERR_FILE_WRITE);
- }
- fflush(dest->outfile);
- /* Make sure we wrote the output file OK */
- if (ferror(dest->outfile))
- ERREXIT(cinfo, JERR_FILE_WRITE);
-}
-
-
-/*
- * Prepare for output to a stdio stream.
- * The caller must have already opened the stream, and is responsible
- * for closing it after finishing compression.
- */
-
-GLOBAL(void)
-jpeg_stdio_dest (j_compress_ptr cinfo, FILE * outfile)
-{
- my_dest_ptr dest;
-
- /* The destination object is made permanent so that multiple JPEG images
- * can be written to the same file without re-executing jpeg_stdio_dest.
- * This makes it dangerous to use this manager and a different destination
- * manager serially with the same JPEG object, because their private object
- * sizes may be different. Caveat programmer.
- */
- if (cinfo->dest == NULL) { /* first time for this JPEG object? */
- cinfo->dest = (struct jpeg_destination_mgr *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
- SIZEOF(my_destination_mgr));
- }
-
- dest = (my_dest_ptr) cinfo->dest;
- dest->pub.init_destination = init_destination;
- dest->pub.empty_output_buffer = empty_output_buffer;
- dest->pub.term_destination = term_destination;
- dest->outfile = outfile;
-}
diff --git a/libjpegtwrp/jdatasrc.c b/libjpegtwrp/jdatasrc.c
deleted file mode 100644
index edc752bf5..000000000
--- a/libjpegtwrp/jdatasrc.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * jdatasrc.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains decompression data source routines for the case of
- * reading JPEG data from a file (or any stdio stream). While these routines
- * are sufficient for most applications, some will want to use a different
- * source manager.
- * IMPORTANT: we assume that fread() will correctly transcribe an array of
- * JOCTETs from 8-bit-wide elements on external storage. If char is wider
- * than 8 bits on your machine, you may need to do some tweaking.
- */
-
-/* this is not a core library module, so it doesn't define JPEG_INTERNALS */
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jerror.h"
-
-
-/* Expanded data source object for stdio input */
-
-typedef struct {
- struct jpeg_source_mgr pub; /* public fields */
-
- FILE * infile; /* source stream */
- JOCTET * buffer; /* start of buffer */
- boolean start_of_file; /* have we gotten any data yet? */
-} my_source_mgr;
-
-typedef my_source_mgr * my_src_ptr;
-
-#define INPUT_BUF_SIZE 4096 /* choose an efficiently fread'able size */
-
-
-/*
- * Initialize source --- called by jpeg_read_header
- * before any data is actually read.
- */
-
-METHODDEF(void)
-init_source (j_decompress_ptr cinfo)
-{
- my_src_ptr src = (my_src_ptr) cinfo->src;
-
- /* We reset the empty-input-file flag for each image,
- * but we don't clear the input buffer.
- * This is correct behavior for reading a series of images from one source.
- */
- src->start_of_file = TRUE;
-}
-
-
-/*
- * Fill the input buffer --- called whenever buffer is emptied.
- *
- * In typical applications, this should read fresh data into the buffer
- * (ignoring the current state of next_input_byte & bytes_in_buffer),
- * reset the pointer & count to the start of the buffer, and return TRUE
- * indicating that the buffer has been reloaded. It is not necessary to
- * fill the buffer entirely, only to obtain at least one more byte.
- *
- * There is no such thing as an EOF return. If the end of the file has been
- * reached, the routine has a choice of ERREXIT() or inserting fake data into
- * the buffer. In most cases, generating a warning message and inserting a
- * fake EOI marker is the best course of action --- this will allow the
- * decompressor to output however much of the image is there. However,
- * the resulting error message is misleading if the real problem is an empty
- * input file, so we handle that case specially.
- *
- * In applications that need to be able to suspend compression due to input
- * not being available yet, a FALSE return indicates that no more data can be
- * obtained right now, but more may be forthcoming later. In this situation,
- * the decompressor will return to its caller (with an indication of the
- * number of scanlines it has read, if any). The application should resume
- * decompression after it has loaded more data into the input buffer. Note
- * that there are substantial restrictions on the use of suspension --- see
- * the documentation.
- *
- * When suspending, the decompressor will back up to a convenient restart point
- * (typically the start of the current MCU). next_input_byte & bytes_in_buffer
- * indicate where the restart point will be if the current call returns FALSE.
- * Data beyond this point must be rescanned after resumption, so move it to
- * the front of the buffer rather than discarding it.
- */
-
-METHODDEF(boolean)
-fill_input_buffer (j_decompress_ptr cinfo)
-{
- my_src_ptr src = (my_src_ptr) cinfo->src;
- size_t nbytes;
-
- nbytes = JFREAD(src->infile, src->buffer, INPUT_BUF_SIZE);
-
- if (nbytes <= 0) {
- if (src->start_of_file) /* Treat empty input file as fatal error */
- ERREXIT(cinfo, JERR_INPUT_EMPTY);
- WARNMS(cinfo, JWRN_JPEG_EOF);
- /* Insert a fake EOI marker */
- src->buffer[0] = (JOCTET) 0xFF;
- src->buffer[1] = (JOCTET) JPEG_EOI;
- nbytes = 2;
- }
-
- src->pub.next_input_byte = src->buffer;
- src->pub.bytes_in_buffer = nbytes;
- src->start_of_file = FALSE;
-
- return TRUE;
-}
-
-
-/*
- * Skip data --- used to skip over a potentially large amount of
- * uninteresting data (such as an APPn marker).
- *
- * Writers of suspendable-input applications must note that skip_input_data
- * is not granted the right to give a suspension return. If the skip extends
- * beyond the data currently in the buffer, the buffer can be marked empty so
- * that the next read will cause a fill_input_buffer call that can suspend.
- * Arranging for additional bytes to be discarded before reloading the input
- * buffer is the application writer's problem.
- */
-
-METHODDEF(void)
-skip_input_data (j_decompress_ptr cinfo, long num_bytes)
-{
- my_src_ptr src = (my_src_ptr) cinfo->src;
-
- /* Just a dumb implementation for now. Could use fseek() except
- * it doesn't work on pipes. Not clear that being smart is worth
- * any trouble anyway --- large skips are infrequent.
- */
- if (num_bytes > 0) {
- while (num_bytes > (long) src->pub.bytes_in_buffer) {
- num_bytes -= (long) src->pub.bytes_in_buffer;
- (void) fill_input_buffer(cinfo);
- /* note we assume that fill_input_buffer will never return FALSE,
- * so suspension need not be handled.
- */
- }
- src->pub.next_input_byte += (size_t) num_bytes;
- src->pub.bytes_in_buffer -= (size_t) num_bytes;
- }
-}
-
-
-/*
- * An additional method that can be provided by data source modules is the
- * resync_to_restart method for error recovery in the presence of RST markers.
- * For the moment, this source module just uses the default resync method
- * provided by the JPEG library. That method assumes that no backtracking
- * is possible.
- */
-
-
-/*
- * Terminate source --- called by jpeg_finish_decompress
- * after all data has been read. Often a no-op.
- *
- * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding
- * application must deal with any cleanup that should happen even
- * for error exit.
- */
-
-METHODDEF(void)
-term_source (j_decompress_ptr cinfo)
-{
- /* no work necessary here */
-}
-
-
-/*
- * Prepare for input from a stdio stream.
- * The caller must have already opened the stream, and is responsible
- * for closing it after finishing decompression.
- */
-
-GLOBAL(void)
-jpeg_stdio_src (j_decompress_ptr cinfo, FILE * infile)
-{
- my_src_ptr src;
-
- /* The source object and input buffer are made permanent so that a series
- * of JPEG images can be read from the same file by calling jpeg_stdio_src
- * only before the first one. (If we discarded the buffer at the end of
- * one image, we'd likely lose the start of the next one.)
- * This makes it unsafe to use this manager and a different source
- * manager serially with the same JPEG object. Caveat programmer.
- */
- if (cinfo->src == NULL) { /* first time for this JPEG object? */
- cinfo->src = (struct jpeg_source_mgr *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
- SIZEOF(my_source_mgr));
- src = (my_src_ptr) cinfo->src;
- src->buffer = (JOCTET *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
- INPUT_BUF_SIZE * SIZEOF(JOCTET));
- }
-
- src = (my_src_ptr) cinfo->src;
- src->pub.init_source = init_source;
- src->pub.fill_input_buffer = fill_input_buffer;
- src->pub.skip_input_data = skip_input_data;
- src->pub.resync_to_restart = jpeg_resync_to_restart; /* use default method */
- src->pub.term_source = term_source;
- src->infile = infile;
- src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */
- src->pub.next_input_byte = NULL; /* until buffer loaded */
-}
diff --git a/libjpegtwrp/jdcoefct.c b/libjpegtwrp/jdcoefct.c
deleted file mode 100644
index 84ce56fb7..000000000
--- a/libjpegtwrp/jdcoefct.c
+++ /dev/null
@@ -1,1038 +0,0 @@
-/*
- * jdcoefct.c
- *
- * Copyright (C) 1994-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains the coefficient buffer controller for decompression.
- * This controller is the top level of the JPEG decompressor proper.
- * The coefficient buffer lies between entropy decoding and inverse-DCT steps.
- *
- * In buffered-image mode, this controller is the interface between
- * input-oriented processing and output-oriented processing.
- * Also, the input side (only) is used when reading a file for transcoding.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-/* Block smoothing is only applicable for progressive JPEG, so: */
-#ifndef D_PROGRESSIVE_SUPPORTED
-#undef BLOCK_SMOOTHING_SUPPORTED
-#endif
-
-/* Private buffer controller object */
-
-typedef struct {
- struct jpeg_d_coef_controller pub; /* public fields */
-
- /* These variables keep track of the current location of the input side. */
- /* cinfo->input_iMCU_row is also used for this. */
- JDIMENSION MCU_ctr; /* counts MCUs processed in current row */
- int MCU_vert_offset; /* counts MCU rows within iMCU row */
- int MCU_rows_per_iMCU_row; /* number of such rows needed */
-
- /* The output side's location is represented by cinfo->output_iMCU_row. */
-
- /* In single-pass modes, it's sufficient to buffer just one MCU.
- * We allocate a workspace of D_MAX_BLOCKS_IN_MCU coefficient blocks,
- * and let the entropy decoder write into that workspace each time.
- * (On 80x86, the workspace is FAR even though it's not really very big;
- * this is to keep the module interfaces unchanged when a large coefficient
- * buffer is necessary.)
- * In multi-pass modes, this array points to the current MCU's blocks
- * within the virtual arrays; it is used only by the input side.
- */
- JBLOCKROW MCU_buffer[D_MAX_BLOCKS_IN_MCU];
-
-#ifdef D_MULTISCAN_FILES_SUPPORTED
- /* In multi-pass modes, we need a virtual block array for each component. */
- jvirt_barray_ptr whole_image[MAX_COMPONENTS];
-#endif
-
-#ifdef BLOCK_SMOOTHING_SUPPORTED
- /* When doing block smoothing, we latch coefficient Al values here */
- int * coef_bits_latch;
-#define SAVED_COEFS 6 /* we save coef_bits[0..5] */
-#endif
-} my_coef_controller;
-
-typedef my_coef_controller * my_coef_ptr;
-
-/* Forward declarations */
-METHODDEF(int) decompress_onepass
- JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf));
-#ifdef D_MULTISCAN_FILES_SUPPORTED
-METHODDEF(int) decompress_data
- JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf));
-#endif
-#ifdef BLOCK_SMOOTHING_SUPPORTED
-LOCAL(boolean) smoothing_ok JPP((j_decompress_ptr cinfo));
-METHODDEF(int) decompress_smooth_data
- JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf));
-#endif
-
-
-LOCAL(void)
-start_iMCU_row (j_decompress_ptr cinfo)
-/* Reset within-iMCU-row counters for a new row (input side) */
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-
- /* In an interleaved scan, an MCU row is the same as an iMCU row.
- * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows.
- * But at the bottom of the image, process only what's left.
- */
- if (cinfo->comps_in_scan > 1) {
- coef->MCU_rows_per_iMCU_row = 1;
- } else {
- if (cinfo->input_iMCU_row < (cinfo->total_iMCU_rows-1))
- coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor;
- else
- coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height;
- }
-
- coef->MCU_ctr = 0;
- coef->MCU_vert_offset = 0;
-}
-
-
-/*
- * Initialize for an input processing pass.
- */
-
-METHODDEF(void)
-start_input_pass (j_decompress_ptr cinfo)
-{
- cinfo->input_iMCU_row = 0;
- start_iMCU_row(cinfo);
-}
-
-
-/*
- * Initialize for an output processing pass.
- */
-
-METHODDEF(void)
-start_output_pass (j_decompress_ptr cinfo)
-{
-#ifdef BLOCK_SMOOTHING_SUPPORTED
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-
- /* If multipass, check to see whether to use block smoothing on this pass */
- if (coef->pub.coef_arrays != NULL) {
- if (cinfo->do_block_smoothing && smoothing_ok(cinfo))
- coef->pub.decompress_data = decompress_smooth_data;
- else
- coef->pub.decompress_data = decompress_data;
- }
-#endif
- cinfo->output_iMCU_row = 0;
-}
-
-
-/*
- * Decompress and return some data in the single-pass case.
- * Always attempts to emit one fully interleaved MCU row ("iMCU" row).
- * Input and output must run in lockstep since we have only a one-MCU buffer.
- * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
- *
- * NB: output_buf contains a plane for each component in image,
- * which we index according to the component's SOF position.
- */
-
-METHODDEF(int)
-decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
- JDIMENSION MCU_col_num; /* index of current MCU within row */
- JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
- JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
- int blkn, ci, xindex, yindex, yoffset, useful_width;
- JSAMPARRAY output_ptr;
- JDIMENSION start_col, output_col;
- jpeg_component_info *compptr;
- inverse_DCT_method_ptr inverse_DCT;
-
-#ifdef ANDROID_TILE_BASED_DECODE
- if (cinfo->tile_decode) {
- last_MCU_col =
- (cinfo->coef->MCU_column_right_boundary -
- cinfo->coef->MCU_column_left_boundary) - 1;
- }
-#endif
-
- /* Loop to process as much as one whole iMCU row */
- for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
- yoffset++) {
- for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col;
- MCU_col_num++) {
- /* Try to fetch an MCU. Entropy decoder expects buffer to be zeroed. */
- if (MCU_col_num < (unsigned int)coef->pub.MCU_columns_to_skip) {
- (*cinfo->entropy->decode_mcu_discard_coef) (cinfo);
- continue;
- } else {
- jzero_far((void FAR *) coef->MCU_buffer[0],
- (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK)));
- if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) {
- /* Suspension forced; update state counters and exit */
- coef->MCU_vert_offset = yoffset;
- coef->MCU_ctr = MCU_col_num;
- return JPEG_SUSPENDED;
- }
- }
- /* Determine where data should go in output_buf and do the IDCT thing.
- * We skip dummy blocks at the right and bottom edges (but blkn gets
- * incremented past them!). Note the inner loop relies on having
- * allocated the MCU_buffer[] blocks sequentially.
- */
- blkn = 0; /* index of current DCT block within MCU */
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- /* Don't bother to IDCT an uninteresting component. */
- if (! compptr->component_needed) {
- blkn += compptr->MCU_blocks;
- continue;
- }
- inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index];
- useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
- : compptr->last_col_width;
- output_ptr = output_buf[compptr->component_index] +
- yoffset * compptr->DCT_scaled_size;
- start_col = MCU_col_num * compptr->MCU_sample_width;
- for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
- if (cinfo->input_iMCU_row < last_iMCU_row ||
- yoffset+yindex < compptr->last_row_height) {
- output_col = start_col;
- for (xindex = 0; xindex < useful_width; xindex++) {
- (*inverse_DCT) (cinfo, compptr,
- (JCOEFPTR) coef->MCU_buffer[blkn+xindex],
- output_ptr, output_col);
- output_col += compptr->DCT_scaled_size;
- }
- }
- blkn += compptr->MCU_width;
- output_ptr += compptr->DCT_scaled_size;
- }
- }
- }
- /* Completed an MCU row, but perhaps not an iMCU row */
- coef->MCU_ctr = 0;
- }
- /* Completed the iMCU row, advance counters for next one */
- cinfo->output_iMCU_row++;
- if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) {
- start_iMCU_row(cinfo);
- return JPEG_ROW_COMPLETED;
- }
- /* Completed the scan */
- (*cinfo->inputctl->finish_input_pass) (cinfo);
- return JPEG_SCAN_COMPLETED;
-}
-
-
-/*
- * Dummy consume-input routine for single-pass operation.
- */
-
-METHODDEF(int)
-dummy_consume_data (j_decompress_ptr cinfo)
-{
- return JPEG_SUSPENDED; /* Always indicate nothing was done */
-}
-
-#ifdef D_MULTISCAN_FILES_SUPPORTED
-/*
- * Consume input data and store it in the full-image coefficient buffer.
- * We read as much as one fully interleaved MCU row ("iMCU" row) per call,
- * ie, v_samp_factor block rows for each component in the scan.
- * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
- */
-
-METHODDEF(int)
-consume_data (j_decompress_ptr cinfo)
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
- JDIMENSION MCU_col_num; /* index of current MCU within row */
- int blkn, ci, xindex, yindex, yoffset;
- JDIMENSION start_col;
- JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
- JBLOCKROW buffer_ptr;
- jpeg_component_info *compptr;
-
- /* Align the virtual buffers for the components used in this scan. */
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- buffer[ci] = (*cinfo->mem->access_virt_barray)
- ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index],
- cinfo->tile_decode ? 0 : cinfo->input_iMCU_row * compptr->v_samp_factor,
- (JDIMENSION) compptr->v_samp_factor, TRUE);
- /* Note: entropy decoder expects buffer to be zeroed,
- * but this is handled automatically by the memory manager
- * because we requested a pre-zeroed array.
- */
- }
- unsigned int MCUs_per_row = cinfo->MCUs_per_row;
-#ifdef ANDROID_TILE_BASED_DECODE
- if (cinfo->tile_decode) {
- int iMCU_width_To_MCU_width;
- if (cinfo->comps_in_scan > 1) {
- // Interleaved
- iMCU_width_To_MCU_width = 1;
- } else {
- // Non-intervleaved
- iMCU_width_To_MCU_width = cinfo->cur_comp_info[0]->h_samp_factor;
- }
- MCUs_per_row = jmin(MCUs_per_row,
- (cinfo->coef->column_right_boundary - cinfo->coef->column_left_boundary)
- * cinfo->entropy->index->MCU_sample_size * iMCU_width_To_MCU_width);
- }
-#endif
-
- /* Loop to process one whole iMCU row */
- for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
- yoffset++) {
- // configure huffman decoder
-#ifdef ANDROID_TILE_BASED_DECODE
- if (cinfo->tile_decode) {
- huffman_scan_header scan_header =
- cinfo->entropy->index->scan[cinfo->input_scan_number];
- int col_offset = cinfo->coef->column_left_boundary;
- (*cinfo->entropy->configure_huffman_decoder) (cinfo,
- scan_header.offset[cinfo->input_iMCU_row]
- [col_offset + yoffset * scan_header.MCUs_per_row]);
- }
-#endif
-
- // zero all blocks
- for (MCU_col_num = coef->MCU_ctr; MCU_col_num < MCUs_per_row;
- MCU_col_num++) {
- /* Construct list of pointers to DCT blocks belonging to this MCU */
- blkn = 0; /* index of current DCT block within MCU */
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- start_col = MCU_col_num * compptr->MCU_width;
- for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
- buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
- for (xindex = 0; xindex < compptr->MCU_width; xindex++) {
- coef->MCU_buffer[blkn++] = buffer_ptr++;
-#ifdef ANDROID_TILE_BASED_DECODE
- if (cinfo->tile_decode && cinfo->input_scan_number == 0) {
- // need to do pre-zero ourselves.
- jzero_far((void FAR *) coef->MCU_buffer[blkn-1],
- (size_t) (SIZEOF(JBLOCK)));
- }
-#endif
- }
- }
- }
-
-
- /* Try to fetch the MCU. */
- if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) {
- /* Suspension forced; update state counters and exit */
- coef->MCU_vert_offset = yoffset;
- coef->MCU_ctr = MCU_col_num;
- return JPEG_SUSPENDED;
- }
- }
- /* Completed an MCU row, but perhaps not an iMCU row */
- coef->MCU_ctr = 0;
- }
- /* Completed the iMCU row, advance counters for next one */
- if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) {
- start_iMCU_row(cinfo);
- return JPEG_ROW_COMPLETED;
- }
- /* Completed the scan */
- (*cinfo->inputctl->finish_input_pass) (cinfo);
- return JPEG_SCAN_COMPLETED;
-}
-
-/*
- * Consume input data and store it in the coefficient buffer.
- * Read one fully interleaved MCU row ("iMCU" row) per call.
- */
-
-METHODDEF(int)
-consume_data_multi_scan (j_decompress_ptr cinfo)
-{
- huffman_index *index = cinfo->entropy->index;
- int i, retcode, ci;
- int mcu = cinfo->input_iMCU_row;
- jinit_phuff_decoder(cinfo);
- for (i = 0; i < index->scan_count; i++) {
- (*cinfo->inputctl->finish_input_pass) (cinfo);
- jset_input_stream_position(cinfo, index->scan[i].bitstream_offset);
- cinfo->output_iMCU_row = mcu;
- cinfo->unread_marker = 0;
- // Consume SOS and DHT headers
- retcode = (*cinfo->inputctl->consume_markers) (cinfo, index, i);
- cinfo->input_iMCU_row = mcu;
- cinfo->input_scan_number = i;
- cinfo->entropy->index = index;
- // Consume scan block data
- consume_data(cinfo);
- }
- cinfo->input_iMCU_row = mcu + 1;
- cinfo->input_scan_number = 0;
- cinfo->output_scan_number = 0;
- return JPEG_ROW_COMPLETED;
-}
-
-/*
- * Same as consume_data, expect for saving the Huffman decode information
- * - bitstream offset and DC coefficient to index.
- */
-
-METHODDEF(int)
-consume_data_build_huffman_index_baseline (j_decompress_ptr cinfo,
- huffman_index *index, int current_scan)
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
- JDIMENSION MCU_col_num; /* index of current MCU within row */
- int ci, xindex, yindex, yoffset;
- JDIMENSION start_col;
- JBLOCKROW buffer_ptr;
-
- huffman_scan_header *scan_header = index->scan + current_scan;
- scan_header->MCU_rows_per_iMCU_row = coef->MCU_rows_per_iMCU_row;
-
- size_t allocate_size = coef->MCU_rows_per_iMCU_row
- * jdiv_round_up(cinfo->MCUs_per_row, index->MCU_sample_size)
- * sizeof(huffman_offset_data);
- scan_header->offset[cinfo->input_iMCU_row] =
- (huffman_offset_data*)malloc(allocate_size);
- index->mem_used += allocate_size;
-
- huffman_offset_data *offset_data = scan_header->offset[cinfo->input_iMCU_row];
-
- /* Loop to process one whole iMCU row */
- for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
- yoffset++) {
- for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row;
- MCU_col_num++) {
- // Record huffman bit offset
- if (MCU_col_num % index->MCU_sample_size == 0) {
- (*cinfo->entropy->get_huffman_decoder_configuration)
- (cinfo, offset_data);
- ++offset_data;
- }
-
- /* Try to fetch the MCU. */
- if (! (*cinfo->entropy->decode_mcu_discard_coef) (cinfo)) {
- /* Suspension forced; update state counters and exit */
- coef->MCU_vert_offset = yoffset;
- coef->MCU_ctr = MCU_col_num;
- return JPEG_SUSPENDED;
- }
- }
- /* Completed an MCU row, but perhaps not an iMCU row */
- coef->MCU_ctr = 0;
- }
- /* Completed the iMCU row, advance counters for next one */
- if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) {
- start_iMCU_row(cinfo);
- return JPEG_ROW_COMPLETED;
- }
- /* Completed the scan */
- (*cinfo->inputctl->finish_input_pass) (cinfo);
- return JPEG_SCAN_COMPLETED;
-}
-
-/*
- * Same as consume_data, expect for saving the Huffman decode information
- * - bitstream offset and DC coefficient to index.
- */
-
-METHODDEF(int)
-consume_data_build_huffman_index_progressive (j_decompress_ptr cinfo,
- huffman_index *index, int current_scan)
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
- JDIMENSION MCU_col_num; /* index of current MCU within row */
- int blkn, ci, xindex, yindex, yoffset;
- JDIMENSION start_col;
- JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
- JBLOCKROW buffer_ptr;
- jpeg_component_info *compptr;
-
- int factor = 4; // maximum factor is 4.
- for (ci = 0; ci < cinfo->comps_in_scan; ci++)
- factor = jmin(factor, cinfo->cur_comp_info[ci]->h_samp_factor);
-
- int sample_size = index->MCU_sample_size * factor;
- huffman_scan_header *scan_header = index->scan + current_scan;
- scan_header->MCU_rows_per_iMCU_row = coef->MCU_rows_per_iMCU_row;
- scan_header->MCUs_per_row = jdiv_round_up(cinfo->MCUs_per_row, sample_size);
- scan_header->comps_in_scan = cinfo->comps_in_scan;
-
- size_t allocate_size = coef->MCU_rows_per_iMCU_row
- * scan_header->MCUs_per_row * sizeof(huffman_offset_data);
- scan_header->offset[cinfo->input_iMCU_row] =
- (huffman_offset_data*)malloc(allocate_size);
- index->mem_used += allocate_size;
-
- huffman_offset_data *offset_data = scan_header->offset[cinfo->input_iMCU_row];
-
- /* Align the virtual buffers for the components used in this scan. */
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- buffer[ci] = (*cinfo->mem->access_virt_barray)
- ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index],
- 0, // Only need one row buffer
- (JDIMENSION) compptr->v_samp_factor, TRUE);
- }
- /* Loop to process one whole iMCU row */
- for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
- yoffset++) {
- for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row;
- MCU_col_num++) {
- /* For each MCU, we loop through different color components.
- * Then, for each color component we will get a list of pointers to DCT
- * blocks in the virtual buffer.
- */
- blkn = 0; /* index of current DCT block within MCU */
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- start_col = MCU_col_num * compptr->MCU_width;
- /* Get the list of pointers to DCT blocks in
- * the virtual buffer in a color component of the MCU.
- */
- for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
- buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
- for (xindex = 0; xindex < compptr->MCU_width; xindex++) {
- coef->MCU_buffer[blkn++] = buffer_ptr++;
- if (cinfo->input_scan_number == 0) {
- // need to do pre-zero by ourself.
- jzero_far((void FAR *) coef->MCU_buffer[blkn-1],
- (size_t) (SIZEOF(JBLOCK)));
- }
- }
- }
- }
- // Record huffman bit offset
- if (MCU_col_num % sample_size == 0) {
- (*cinfo->entropy->get_huffman_decoder_configuration)
- (cinfo, offset_data);
- ++offset_data;
- }
- /* Try to fetch the MCU. */
- if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) {
- /* Suspension forced; update state counters and exit */
- coef->MCU_vert_offset = yoffset;
- coef->MCU_ctr = MCU_col_num;
- return JPEG_SUSPENDED;
- }
- }
- /* Completed an MCU row, but perhaps not an iMCU row */
- coef->MCU_ctr = 0;
- }
- (*cinfo->entropy->get_huffman_decoder_configuration)
- (cinfo, &scan_header->prev_MCU_offset);
- /* Completed the iMCU row, advance counters for next one */
- if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) {
- start_iMCU_row(cinfo);
- return JPEG_ROW_COMPLETED;
- }
- /* Completed the scan */
- (*cinfo->inputctl->finish_input_pass) (cinfo);
- return JPEG_SCAN_COMPLETED;
-}
-
-/*
- * Decompress and return some data in the multi-pass case.
- * Always attempts to emit one fully interleaved MCU row ("iMCU" row).
- * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
- *
- * NB: output_buf contains a plane for each component in image.
- */
-
-METHODDEF(int)
-decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
- JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
- JDIMENSION block_num;
- int ci, block_row, block_rows;
- JBLOCKARRAY buffer;
- JBLOCKROW buffer_ptr;
- JSAMPARRAY output_ptr;
- JDIMENSION output_col;
- jpeg_component_info *compptr;
- inverse_DCT_method_ptr inverse_DCT;
-
- /* Force some input to be done if we are getting ahead of the input. */
- while (cinfo->input_scan_number < cinfo->output_scan_number ||
- (cinfo->input_scan_number == cinfo->output_scan_number &&
- cinfo->input_iMCU_row <= cinfo->output_iMCU_row)) {
- if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED)
- return JPEG_SUSPENDED;
- }
-
- /* OK, output from the virtual arrays. */
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- /* Don't bother to IDCT an uninteresting component. */
- if (! compptr->component_needed)
- continue;
- /* Align the virtual buffer for this component. */
- buffer = (*cinfo->mem->access_virt_barray)
- ((j_common_ptr) cinfo, coef->whole_image[ci],
- cinfo->tile_decode ? 0 : cinfo->output_iMCU_row * compptr->v_samp_factor,
- (JDIMENSION) compptr->v_samp_factor, FALSE);
- /* Count non-dummy DCT block rows in this iMCU row. */
- if (cinfo->output_iMCU_row < last_iMCU_row)
- block_rows = compptr->v_samp_factor;
- else {
- /* NB: can't use last_row_height here; it is input-side-dependent! */
- block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
- if (block_rows == 0) block_rows = compptr->v_samp_factor;
- }
- inverse_DCT = cinfo->idct->inverse_DCT[ci];
- output_ptr = output_buf[ci];
- int width_in_blocks = compptr->width_in_blocks;
- int start_block = 0;
-#if ANDROID_TILE_BASED_DECODE
- if (cinfo->tile_decode) {
- // width_in_blocks for a component depends on its h_samp_factor.
- width_in_blocks = jmin(width_in_blocks,
- (cinfo->coef->MCU_column_right_boundary -
- cinfo->coef->MCU_column_left_boundary) *
- compptr->h_samp_factor);
- start_block = coef->pub.MCU_columns_to_skip *
- compptr->h_samp_factor;
- }
-#endif
- /* Loop over all DCT blocks to be processed. */
- for (block_row = 0; block_row < block_rows; block_row++) {
- buffer_ptr = buffer[block_row];
- output_col = start_block * compptr->DCT_scaled_size;
- buffer_ptr += start_block;
- for (block_num = start_block; block_num < (unsigned int)width_in_blocks; block_num++) {
- (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr,
- output_ptr, output_col);
- buffer_ptr++;
- output_col += compptr->DCT_scaled_size;
- }
- output_ptr += compptr->DCT_scaled_size;
- }
- }
-
- if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows)
- return JPEG_ROW_COMPLETED;
- return JPEG_SCAN_COMPLETED;
-}
-
-#endif /* D_MULTISCAN_FILES_SUPPORTED */
-
-
-#ifdef BLOCK_SMOOTHING_SUPPORTED
-
-/*
- * This code applies interblock smoothing as described by section K.8
- * of the JPEG standard: the first 5 AC coefficients are estimated from
- * the DC values of a DCT block and its 8 neighboring blocks.
- * We apply smoothing only for progressive JPEG decoding, and only if
- * the coefficients it can estimate are not yet known to full precision.
- */
-
-/* Natural-order array positions of the first 5 zigzag-order coefficients */
-#define Q01_POS 1
-#define Q10_POS 8
-#define Q20_POS 16
-#define Q11_POS 9
-#define Q02_POS 2
-
-/*
- * Determine whether block smoothing is applicable and safe.
- * We also latch the current states of the coef_bits[] entries for the
- * AC coefficients; otherwise, if the input side of the decompressor
- * advances into a new scan, we might think the coefficients are known
- * more accurately than they really are.
- */
-
-LOCAL(boolean)
-smoothing_ok (j_decompress_ptr cinfo)
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
- boolean smoothing_useful = FALSE;
- int ci, coefi;
- jpeg_component_info *compptr;
- JQUANT_TBL * qtable;
- int * coef_bits;
- int * coef_bits_latch;
-
- if (! cinfo->progressive_mode || cinfo->coef_bits == NULL)
- return FALSE;
-
- /* Allocate latch area if not already done */
- if (coef->coef_bits_latch == NULL)
- coef->coef_bits_latch = (int *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- cinfo->num_components *
- (SAVED_COEFS * SIZEOF(int)));
- coef_bits_latch = coef->coef_bits_latch;
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- /* All components' quantization values must already be latched. */
- if ((qtable = compptr->quant_table) == NULL)
- return FALSE;
- /* Verify DC & first 5 AC quantizers are nonzero to avoid zero-divide. */
- if (qtable->quantval[0] == 0 ||
- qtable->quantval[Q01_POS] == 0 ||
- qtable->quantval[Q10_POS] == 0 ||
- qtable->quantval[Q20_POS] == 0 ||
- qtable->quantval[Q11_POS] == 0 ||
- qtable->quantval[Q02_POS] == 0)
- return FALSE;
- /* DC values must be at least partly known for all components. */
- coef_bits = cinfo->coef_bits[ci];
- if (coef_bits[0] < 0)
- return FALSE;
- /* Block smoothing is helpful if some AC coefficients remain inaccurate. */
- for (coefi = 1; coefi <= 5; coefi++) {
- coef_bits_latch[coefi] = coef_bits[coefi];
- if (coef_bits[coefi] != 0)
- smoothing_useful = TRUE;
- }
- coef_bits_latch += SAVED_COEFS;
- }
-
- return smoothing_useful;
-}
-
-
-/*
- * Variant of decompress_data for use when doing block smoothing.
- */
-
-METHODDEF(int)
-decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
-{
- my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
- JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
- JDIMENSION block_num, last_block_column;
- int ci, block_row, block_rows, access_rows;
- JBLOCKARRAY buffer;
- JBLOCKROW buffer_ptr, prev_block_row, next_block_row;
- JSAMPARRAY output_ptr;
- JDIMENSION output_col;
- jpeg_component_info *compptr;
- inverse_DCT_method_ptr inverse_DCT;
- boolean first_row, last_row;
- JBLOCK workspace;
- int *coef_bits;
- JQUANT_TBL *quanttbl;
- INT32 Q00,Q01,Q02,Q10,Q11,Q20, num;
- int DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9;
- int Al, pred;
-
- /* Force some input to be done if we are getting ahead of the input. */
- while (cinfo->input_scan_number <= cinfo->output_scan_number &&
- ! cinfo->inputctl->eoi_reached) {
- if (cinfo->input_scan_number == cinfo->output_scan_number) {
- /* If input is working on current scan, we ordinarily want it to
- * have completed the current row. But if input scan is DC,
- * we want it to keep one row ahead so that next block row's DC
- * values are up to date.
- */
- JDIMENSION delta = (cinfo->Ss == 0) ? 1 : 0;
- if (cinfo->input_iMCU_row > cinfo->output_iMCU_row+delta)
- break;
- }
- if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED)
- return JPEG_SUSPENDED;
- }
-
- /* OK, output from the virtual arrays. */
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- /* Don't bother to IDCT an uninteresting component. */
- if (! compptr->component_needed)
- continue;
- /* Count non-dummy DCT block rows in this iMCU row. */
- if (cinfo->output_iMCU_row < last_iMCU_row) {
- block_rows = compptr->v_samp_factor;
- access_rows = block_rows * 2; /* this and next iMCU row */
- last_row = FALSE;
- } else {
- /* NB: can't use last_row_height here; it is input-side-dependent! */
- block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
- if (block_rows == 0) block_rows = compptr->v_samp_factor;
- access_rows = block_rows; /* this iMCU row only */
- last_row = TRUE;
- }
- /* Align the virtual buffer for this component. */
- if (cinfo->output_iMCU_row > 0) {
- access_rows += compptr->v_samp_factor; /* prior iMCU row too */
- buffer = (*cinfo->mem->access_virt_barray)
- ((j_common_ptr) cinfo, coef->whole_image[ci],
- (cinfo->output_iMCU_row - 1) * compptr->v_samp_factor,
- (JDIMENSION) access_rows, FALSE);
- buffer += compptr->v_samp_factor; /* point to current iMCU row */
- first_row = FALSE;
- } else {
- buffer = (*cinfo->mem->access_virt_barray)
- ((j_common_ptr) cinfo, coef->whole_image[ci],
- (JDIMENSION) 0, (JDIMENSION) access_rows, FALSE);
- first_row = TRUE;
- }
- /* Fetch component-dependent info */
- coef_bits = coef->coef_bits_latch + (ci * SAVED_COEFS);
- quanttbl = compptr->quant_table;
- Q00 = quanttbl->quantval[0];
- Q01 = quanttbl->quantval[Q01_POS];
- Q10 = quanttbl->quantval[Q10_POS];
- Q20 = quanttbl->quantval[Q20_POS];
- Q11 = quanttbl->quantval[Q11_POS];
- Q02 = quanttbl->quantval[Q02_POS];
- inverse_DCT = cinfo->idct->inverse_DCT[ci];
- output_ptr = output_buf[ci];
- /* Loop over all DCT blocks to be processed. */
- for (block_row = 0; block_row < block_rows; block_row++) {
- buffer_ptr = buffer[block_row];
- if (first_row && block_row == 0)
- prev_block_row = buffer_ptr;
- else
- prev_block_row = buffer[block_row-1];
- if (last_row && block_row == block_rows-1)
- next_block_row = buffer_ptr;
- else
- next_block_row = buffer[block_row+1];
- /* We fetch the surrounding DC values using a sliding-register approach.
- * Initialize all nine here so as to do the right thing on narrow pics.
- */
- DC1 = DC2 = DC3 = (int) prev_block_row[0][0];
- DC4 = DC5 = DC6 = (int) buffer_ptr[0][0];
- DC7 = DC8 = DC9 = (int) next_block_row[0][0];
- output_col = 0;
- last_block_column = compptr->width_in_blocks - 1;
- for (block_num = 0; block_num <= last_block_column; block_num++) {
- /* Fetch current DCT block into workspace so we can modify it. */
- jcopy_block_row(buffer_ptr, (JBLOCKROW) workspace, (JDIMENSION) 1);
- /* Update DC values */
- if (block_num < last_block_column) {
- DC3 = (int) prev_block_row[1][0];
- DC6 = (int) buffer_ptr[1][0];
- DC9 = (int) next_block_row[1][0];
- }
- /* Compute coefficient estimates per K.8.
- * An estimate is applied only if coefficient is still zero,
- * and is not known to be fully accurate.
- */
- /* AC01 */
- if ((Al=coef_bits[1]) != 0 && workspace[1] == 0) {
- num = 36 * Q00 * (DC4 - DC6);
- if (num >= 0) {
- pred = (int) (((Q01<<7) + num) / (Q01<<8));
- if (Al > 0 && pred >= (1<<Al))
- pred = (1<<Al)-1;
- } else {
- pred = (int) (((Q01<<7) - num) / (Q01<<8));
- if (Al > 0 && pred >= (1<<Al))
- pred = (1<<Al)-1;
- pred = -pred;
- }
- workspace[1] = (JCOEF) pred;
- }
- /* AC10 */
- if ((Al=coef_bits[2]) != 0 && workspace[8] == 0) {
- num = 36 * Q00 * (DC2 - DC8);
- if (num >= 0) {
- pred = (int) (((Q10<<7) + num) / (Q10<<8));
- if (Al > 0 && pred >= (1<<Al))
- pred = (1<<Al)-1;
- } else {
- pred = (int) (((Q10<<7) - num) / (Q10<<8));
- if (Al > 0 && pred >= (1<<Al))
- pred = (1<<Al)-1;
- pred = -pred;
- }
- workspace[8] = (JCOEF) pred;
- }
- /* AC20 */
- if ((Al=coef_bits[3]) != 0 && workspace[16] == 0) {
- num = 9 * Q00 * (DC2 + DC8 - 2*DC5);
- if (num >= 0) {
- pred = (int) (((Q20<<7) + num) / (Q20<<8));
- if (Al > 0 && pred >= (1<<Al))
- pred = (1<<Al)-1;
- } else {
- pred = (int) (((Q20<<7) - num) / (Q20<<8));
- if (Al > 0 && pred >= (1<<Al))
- pred = (1<<Al)-1;
- pred = -pred;
- }
- workspace[16] = (JCOEF) pred;
- }
- /* AC11 */
- if ((Al=coef_bits[4]) != 0 && workspace[9] == 0) {
- num = 5 * Q00 * (DC1 - DC3 - DC7 + DC9);
- if (num >= 0) {
- pred = (int) (((Q11<<7) + num) / (Q11<<8));
- if (Al > 0 && pred >= (1<<Al))
- pred = (1<<Al)-1;
- } else {
- pred = (int) (((Q11<<7) - num) / (Q11<<8));
- if (Al > 0 && pred >= (1<<Al))
- pred = (1<<Al)-1;
- pred = -pred;
- }
- workspace[9] = (JCOEF) pred;
- }
- /* AC02 */
- if ((Al=coef_bits[5]) != 0 && workspace[2] == 0) {
- num = 9 * Q00 * (DC4 + DC6 - 2*DC5);
- if (num >= 0) {
- pred = (int) (((Q02<<7) + num) / (Q02<<8));
- if (Al > 0 && pred >= (1<<Al))
- pred = (1<<Al)-1;
- } else {
- pred = (int) (((Q02<<7) - num) / (Q02<<8));
- if (Al > 0 && pred >= (1<<Al))
- pred = (1<<Al)-1;
- pred = -pred;
- }
- workspace[2] = (JCOEF) pred;
- }
- /* OK, do the IDCT */
- (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) workspace,
- output_ptr, output_col);
- /* Advance for next column */
- DC1 = DC2; DC2 = DC3;
- DC4 = DC5; DC5 = DC6;
- DC7 = DC8; DC8 = DC9;
- buffer_ptr++, prev_block_row++, next_block_row++;
- output_col += compptr->DCT_scaled_size;
- }
- output_ptr += compptr->DCT_scaled_size;
- }
- }
-
- if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows)
- return JPEG_ROW_COMPLETED;
- return JPEG_SCAN_COMPLETED;
-}
-
-#endif /* BLOCK_SMOOTHING_SUPPORTED */
-
-
-/*
- * Initialize coefficient buffer controller.
- */
-
-GLOBAL(void)
-jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
-{
- my_coef_ptr coef;
-
- coef = (my_coef_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_coef_controller));
- cinfo->coef = (struct jpeg_d_coef_controller *) coef;
- coef->pub.start_input_pass = start_input_pass;
- coef->pub.start_output_pass = start_output_pass;
- coef->pub.column_left_boundary = 0;
- coef->pub.column_right_boundary = 0;
- coef->pub.MCU_columns_to_skip = 0;
-#ifdef BLOCK_SMOOTHING_SUPPORTED
- coef->coef_bits_latch = NULL;
-#endif
-
-#ifdef ANDROID_TILE_BASED_DECODE
- if (cinfo->tile_decode) {
- if (cinfo->progressive_mode) {
- /* Allocate one iMCU row virtual array, coef->whole_image[ci],
- * for each color component, padded to a multiple of h_samp_factor
- * DCT blocks in the horizontal direction.
- */
- int ci, access_rows;
- jpeg_component_info *compptr;
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- access_rows = compptr->v_samp_factor;
- coef->whole_image[ci] = (*cinfo->mem->request_virt_barray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE,
- (JDIMENSION) jround_up((long) compptr->width_in_blocks,
- (long) compptr->h_samp_factor),
- (JDIMENSION) compptr->v_samp_factor, // one iMCU row
- (JDIMENSION) access_rows);
- }
- coef->pub.consume_data_build_huffman_index =
- consume_data_build_huffman_index_progressive;
- coef->pub.consume_data = consume_data_multi_scan;
- coef->pub.coef_arrays = coef->whole_image; /* link to virtual arrays */
- coef->pub.decompress_data = decompress_onepass;
- } else {
- /* We only need a single-MCU buffer. */
- JBLOCKROW buffer;
- int i;
-
- buffer = (JBLOCKROW)
- (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
- for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) {
- coef->MCU_buffer[i] = buffer + i;
- }
- coef->pub.consume_data_build_huffman_index =
- consume_data_build_huffman_index_baseline;
- coef->pub.consume_data = dummy_consume_data;
- coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */
- coef->pub.decompress_data = decompress_onepass;
- }
- return;
- }
-#endif
-
- /* Create the coefficient buffer. */
- if (need_full_buffer) {
-#ifdef D_MULTISCAN_FILES_SUPPORTED
- /* Allocate a full-image virtual array for each component, */
- /* padded to a multiple of samp_factor DCT blocks in each direction. */
- /* Note we ask for a pre-zeroed array. */
- int ci, access_rows;
- jpeg_component_info *compptr;
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- access_rows = compptr->v_samp_factor;
-#ifdef BLOCK_SMOOTHING_SUPPORTED
- /* If block smoothing could be used, need a bigger window */
- if (cinfo->progressive_mode)
- access_rows *= 3;
-#endif
- coef->whole_image[ci] = (*cinfo->mem->request_virt_barray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE,
- (JDIMENSION) jround_up((long) compptr->width_in_blocks,
- (long) compptr->h_samp_factor),
- (JDIMENSION) jround_up((long) compptr->height_in_blocks,
- (long) compptr->v_samp_factor),
- (JDIMENSION) access_rows);
- }
- coef->pub.consume_data = consume_data;
- coef->pub.decompress_data = decompress_data;
- coef->pub.coef_arrays = coef->whole_image; /* link to virtual arrays */
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
- } else {
- /* We only need a single-MCU buffer. */
- JBLOCKROW buffer;
- int i;
-
- buffer = (JBLOCKROW)
- (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
- for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) {
- coef->MCU_buffer[i] = buffer + i;
- }
- coef->pub.consume_data = dummy_consume_data;
- coef->pub.decompress_data = decompress_onepass;
- coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */
- }
-}
diff --git a/libjpegtwrp/jdcolor.c b/libjpegtwrp/jdcolor.c
deleted file mode 100644
index 9a6519e3e..000000000
--- a/libjpegtwrp/jdcolor.c
+++ /dev/null
@@ -1,976 +0,0 @@
-/*
- * jdcolor.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains output colorspace conversion routines.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-/* Private subobject */
-
-typedef struct {
- struct jpeg_color_deconverter pub; /* public fields */
-
- /* Private state for YCC->RGB conversion */
- int * Cr_r_tab; /* => table for Cr to R conversion */
- int * Cb_b_tab; /* => table for Cb to B conversion */
- INT32 * Cr_g_tab; /* => table for Cr to G conversion */
- INT32 * Cb_g_tab; /* => table for Cb to G conversion */
-} my_color_deconverter;
-
-typedef my_color_deconverter * my_cconvert_ptr;
-
-
-#ifdef ANDROID_RGB
-
-/* Declarations for ordered dithering.
- *
- * We use 4x4 ordered dither array packed into 32 bits. This array is
- * sufficent for dithering RGB_888 to RGB_565.
- */
-
-#define DITHER_MASK 0x3
-#define DITHER_ROTATE(x) (((x)<<24) | (((x)>>8)&0x00FFFFFF))
-static const INT32 dither_matrix[4] = {
- 0x0008020A,
- 0x0C040E06,
- 0x030B0109,
- 0x0F070D05
-};
-
-#endif
-
-
-/**************** YCbCr -> RGB conversion: most common case **************/
-
-/*
- * YCbCr is defined per CCIR 601-1, except that Cb and Cr are
- * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
- * The conversion equations to be implemented are therefore
- * R = Y + 1.40200 * Cr
- * G = Y - 0.34414 * Cb - 0.71414 * Cr
- * B = Y + 1.77200 * Cb
- * where Cb and Cr represent the incoming values less CENTERJSAMPLE.
- * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
- *
- * To avoid floating-point arithmetic, we represent the fractional constants
- * as integers scaled up by 2^16 (about 4 digits precision); we have to divide
- * the products by 2^16, with appropriate rounding, to get the correct answer.
- * Notice that Y, being an integral input, does not contribute any fraction
- * so it need not participate in the rounding.
- *
- * For even more speed, we avoid doing any multiplications in the inner loop
- * by precalculating the constants times Cb and Cr for all possible values.
- * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
- * for 12-bit samples it is still acceptable. It's not very reasonable for
- * 16-bit samples, but if you want lossless storage you shouldn't be changing
- * colorspace anyway.
- * The Cr=>R and Cb=>B values can be rounded to integers in advance; the
- * values for the G calculation are left scaled up, since we must add them
- * together before rounding.
- */
-
-#define SCALEBITS 16 /* speediest right-shift on some machines */
-#define ONE_HALF ((INT32) 1 << (SCALEBITS-1))
-#define FIX(x) ((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
-
-
-/*
- * Initialize tables for YCC->RGB colorspace conversion.
- */
-
-LOCAL(void)
-build_ycc_rgb_table (j_decompress_ptr cinfo)
-{
- my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
- int i;
- INT32 x;
- SHIFT_TEMPS
-
- cconvert->Cr_r_tab = (int *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (MAXJSAMPLE+1) * SIZEOF(int));
- cconvert->Cb_b_tab = (int *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (MAXJSAMPLE+1) * SIZEOF(int));
- cconvert->Cr_g_tab = (INT32 *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (MAXJSAMPLE+1) * SIZEOF(INT32));
- cconvert->Cb_g_tab = (INT32 *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (MAXJSAMPLE+1) * SIZEOF(INT32));
-
- for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
- /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
- /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
- /* Cr=>R value is nearest int to 1.40200 * x */
- cconvert->Cr_r_tab[i] = (int)
- RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
- /* Cb=>B value is nearest int to 1.77200 * x */
- cconvert->Cb_b_tab[i] = (int)
- RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
- /* Cr=>G value is scaled-up -0.71414 * x */
- cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x;
- /* Cb=>G value is scaled-up -0.34414 * x */
- /* We also add in ONE_HALF so that need not do it in inner loop */
- cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
- }
-#ifdef NEEDS_ARM_ERRATA_754319_754320
- asm volatile ( "vmov s0,s0\n" );
-#endif
-}
-
-/*
- * Convert some rows of samples to the output colorspace.
- *
- * Note that we change from noninterleaved, one-plane-per-component format
- * to interleaved-pixel format. The output buffer is therefore three times
- * as wide as the input buffer.
- * A starting row offset is provided only for the input buffer. The caller
- * can easily adjust the passed output_buf value to accommodate any row
- * offset required on that side.
- */
-
-METHODDEF(void)
-ycc_rgb_convert (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION input_row,
- JSAMPARRAY output_buf, int num_rows)
-#ifdef ANDROID_JPEG_USE_VENUM
-/*
- * Converts YCC->RGB888 using VeNum instructions.
- */
-{
- my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
- JSAMPROW inptr0, inptr1, inptr2;
- JSAMPROW outptr;
- JDIMENSION row;
-
- for (row = 0; row < (JDIMENSION)num_rows; row++)
- {
- inptr0 = input_buf[0][input_row];
- inptr1 = input_buf[1][input_row];
- inptr2 = input_buf[2][input_row];
-
- input_row++;
- outptr = *output_buf++;
-
- yvup2bgr888_venum((UINT8*) inptr0,
- (UINT8*) inptr2,
- (UINT8*) inptr1,
- (UINT8*) outptr,
- cinfo->output_width);
- }
-}
-#else
-{
- my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
- register int y, cb, cr;
- register JSAMPROW outptr;
- register JSAMPROW inptr0, inptr1, inptr2;
- register JDIMENSION col;
- JDIMENSION num_cols = cinfo->output_width;
- /* copy these pointers into registers if possible */
- register JSAMPLE * range_limit = cinfo->sample_range_limit;
- register int * Crrtab = cconvert->Cr_r_tab;
- register int * Cbbtab = cconvert->Cb_b_tab;
- register INT32 * Crgtab = cconvert->Cr_g_tab;
- register INT32 * Cbgtab = cconvert->Cb_g_tab;
- SHIFT_TEMPS
-
- while (--num_rows >= 0) {
- inptr0 = input_buf[0][input_row];
- inptr1 = input_buf[1][input_row];
- inptr2 = input_buf[2][input_row];
- input_row++;
- outptr = *output_buf++;
- for (col = 0; col < num_cols; col++) {
- y = GETJSAMPLE(inptr0[col]);
- cb = GETJSAMPLE(inptr1[col]);
- cr = GETJSAMPLE(inptr2[col]);
- /* Range-limiting is essential due to noise introduced by DCT losses. */
- outptr[RGB_RED] = range_limit[y + Crrtab[cr]];
- outptr[RGB_GREEN] = range_limit[y +
- ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
- SCALEBITS))];
- outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]];
- outptr += RGB_PIXELSIZE;
- }
- }
-}
-#endif /* ANDROID_JPEG_USE_VENUM */
-
-#ifdef ANDROID_RGB
-METHODDEF(void)
-ycc_rgba_8888_convert (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION input_row,
- JSAMPARRAY output_buf, int num_rows)
-#ifdef ANDROID_JPEG_USE_VENUM
-/*
- * Converts YCC->RGBA8888 using VeNum instructions.
- */
-{
- my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
- JSAMPROW inptr0, inptr1, inptr2;
- JSAMPROW outptr;
- JDIMENSION row;
-
- for (row = 0; row < (JDIMENSION)num_rows; row++)
- {
- inptr0 = input_buf[0][input_row];
- inptr1 = input_buf[1][input_row];
- inptr2 = input_buf[2][input_row];
- input_row++;
- outptr = *output_buf++;
-
- yvup2abgr8888_venum((UINT8*) inptr0,
- (UINT8*) inptr2,
- (UINT8*) inptr1,
- (UINT8*) outptr,
- cinfo->output_width);
- }
-}
-
-#else
-{
- my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
- register int y, cb, cr;
- register JSAMPROW outptr;
- register JSAMPROW inptr0, inptr1, inptr2;
- register JDIMENSION col;
- JDIMENSION num_cols = cinfo->output_width;
- /* copy these pointers into registers if possible */
- register JSAMPLE * range_limit = cinfo->sample_range_limit;
- register int * Crrtab = cconvert->Cr_r_tab;
- register int * Cbbtab = cconvert->Cb_b_tab;
- register INT32 * Crgtab = cconvert->Cr_g_tab;
- register INT32 * Cbgtab = cconvert->Cb_g_tab;
- SHIFT_TEMPS
-
- while (--num_rows >= 0) {
- inptr0 = input_buf[0][input_row];
- inptr1 = input_buf[1][input_row];
- inptr2 = input_buf[2][input_row];
- input_row++;
- outptr = *output_buf++;
- for (col = 0; col < num_cols; col++) {
- y = GETJSAMPLE(inptr0[col]);
- cb = GETJSAMPLE(inptr1[col]);
- cr = GETJSAMPLE(inptr2[col]);
- /* Range-limiting is essential due to noise introduced by DCT losses. */
- outptr[RGB_RED] = range_limit[y + Crrtab[cr]];
- outptr[RGB_GREEN] = range_limit[y +
- ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
- SCALEBITS))];
- outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]];
- outptr[RGB_ALPHA] = 0xFF;
- outptr += 4;
- }
- }
-}
-#endif /* ANDROID_JPEG_USE_VENUM */
-
-METHODDEF(void)
-ycc_rgb_565_convert (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION input_row,
- JSAMPARRAY output_buf, int num_rows)
-#if defined(ANDROID_JPEG_USE_VENUM)
-/*
- * Converts YCC->RGB565 using VeNum instructions.
- */
-{
- my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
- JSAMPROW inptr0, inptr1, inptr2;
- JSAMPROW outptr;
- JDIMENSION row;
-
- for (row = 0; row < (JDIMENSION)num_rows; row++)
- {
- inptr0 = input_buf[0][input_row];
- inptr1 = input_buf[1][input_row];
- inptr2 = input_buf[2][input_row];
- input_row++;
- outptr = *output_buf++;
-
- yvup2rgb565_venum((UINT8*) inptr0,
- (UINT8*) inptr2,
- (UINT8*) inptr1,
- (UINT8*) outptr,
- cinfo->output_width);
- }
-}
-#else
-{
- my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
- register int y, cb, cr;
- register JSAMPROW outptr;
- register JSAMPROW inptr0, inptr1, inptr2;
- register JDIMENSION col;
- JDIMENSION num_cols = cinfo->output_width;
- /* copy these pointers into registers if possible */
- register JSAMPLE * range_limit = cinfo->sample_range_limit;
- register int * Crrtab = cconvert->Cr_r_tab;
- register int * Cbbtab = cconvert->Cb_b_tab;
- register INT32 * Crgtab = cconvert->Cr_g_tab;
- register INT32 * Cbgtab = cconvert->Cb_g_tab;
- SHIFT_TEMPS
-
- while (--num_rows >= 0) {
- INT32 rgb;
- unsigned int r, g, b;
- inptr0 = input_buf[0][input_row];
- inptr1 = input_buf[1][input_row];
- inptr2 = input_buf[2][input_row];
- input_row++;
- outptr = *output_buf++;
-
- if (PACK_NEED_ALIGNMENT(outptr)) {
- y = GETJSAMPLE(*inptr0++);
- cb = GETJSAMPLE(*inptr1++);
- cr = GETJSAMPLE(*inptr2++);
- r = range_limit[y + Crrtab[cr]];
- g = range_limit[y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS))];
- b = range_limit[y + Cbbtab[cb]];
- rgb = PACK_SHORT_565(r,g,b);
- *(INT16*)outptr = rgb;
- outptr += 2;
- num_cols--;
- }
- for (col = 0; col < (num_cols>>1); col++) {
- y = GETJSAMPLE(*inptr0++);
- cb = GETJSAMPLE(*inptr1++);
- cr = GETJSAMPLE(*inptr2++);
- r = range_limit[y + Crrtab[cr]];
- g = range_limit[y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS))];
- b = range_limit[y + Cbbtab[cb]];
- rgb = PACK_SHORT_565(r,g,b);
-
- y = GETJSAMPLE(*inptr0++);
- cb = GETJSAMPLE(*inptr1++);
- cr = GETJSAMPLE(*inptr2++);
- r = range_limit[y + Crrtab[cr]];
- g = range_limit[y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS))];
- b = range_limit[y + Cbbtab[cb]];
- rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b));
- WRITE_TWO_ALIGNED_PIXELS(outptr, rgb);
- outptr += 4;
- }
- if (num_cols&1) {
- y = GETJSAMPLE(*inptr0);
- cb = GETJSAMPLE(*inptr1);
- cr = GETJSAMPLE(*inptr2);
- r = range_limit[y + Crrtab[cr]];
- g = range_limit[y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS))];
- b = range_limit[y + Cbbtab[cb]];
- rgb = PACK_SHORT_565(r,g,b);
- *(INT16*)outptr = rgb;
- }
- }
-}
-#endif /* ANDROID_JPEG_USE_VENUM */
-
-METHODDEF(void)
-ycc_rgb_565D_convert (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION input_row,
- JSAMPARRAY output_buf, int num_rows)
-{
- my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
- register int y, cb, cr;
- register JSAMPROW outptr;
- register JSAMPROW inptr0, inptr1, inptr2;
- register JDIMENSION col;
- JDIMENSION num_cols = cinfo->output_width;
- /* copy these pointers into registers if possible */
- register JSAMPLE * range_limit = cinfo->sample_range_limit;
- register int * Crrtab = cconvert->Cr_r_tab;
- register int * Cbbtab = cconvert->Cb_b_tab;
- register INT32 * Crgtab = cconvert->Cr_g_tab;
- register INT32 * Cbgtab = cconvert->Cb_g_tab;
- INT32 d0 = dither_matrix[cinfo->output_scanline & DITHER_MASK];
- SHIFT_TEMPS
-
- while (--num_rows >= 0) {
- INT32 rgb;
- unsigned int r, g, b;
- inptr0 = input_buf[0][input_row];
- inptr1 = input_buf[1][input_row];
- inptr2 = input_buf[2][input_row];
- input_row++;
- outptr = *output_buf++;
- if (PACK_NEED_ALIGNMENT(outptr)) {
- y = GETJSAMPLE(*inptr0++);
- cb = GETJSAMPLE(*inptr1++);
- cr = GETJSAMPLE(*inptr2++);
- r = range_limit[DITHER_565_R(y + Crrtab[cr], d0)];
- g = range_limit[DITHER_565_G(y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS)), d0)];
- b = range_limit[DITHER_565_B(y + Cbbtab[cb], d0)];
- rgb = PACK_SHORT_565(r,g,b);
- *(INT16*)outptr = rgb;
- outptr += 2;
- num_cols--;
- }
- for (col = 0; col < (num_cols>>1); col++) {
- y = GETJSAMPLE(*inptr0++);
- cb = GETJSAMPLE(*inptr1++);
- cr = GETJSAMPLE(*inptr2++);
- r = range_limit[DITHER_565_R(y + Crrtab[cr], d0)];
- g = range_limit[DITHER_565_G(y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS)), d0)];
- b = range_limit[DITHER_565_B(y + Cbbtab[cb], d0)];
- d0 = DITHER_ROTATE(d0);
- rgb = PACK_SHORT_565(r,g,b);
- y = GETJSAMPLE(*inptr0++);
- cb = GETJSAMPLE(*inptr1++);
- cr = GETJSAMPLE(*inptr2++);
- r = range_limit[DITHER_565_R(y + Crrtab[cr], d0)];
- g = range_limit[DITHER_565_G(y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS)), d0)];
- b = range_limit[DITHER_565_B(y + Cbbtab[cb], d0)];
- d0 = DITHER_ROTATE(d0);
- rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b));
- WRITE_TWO_ALIGNED_PIXELS(outptr, rgb);
- outptr += 4;
- }
- if (num_cols&1) {
- y = GETJSAMPLE(*inptr0);
- cb = GETJSAMPLE(*inptr1);
- cr = GETJSAMPLE(*inptr2);
- r = range_limit[DITHER_565_R(y + Crrtab[cr], d0)];
- g = range_limit[DITHER_565_G(y + ((int)RIGHT_SHIFT(Cbgtab[cb]+Crgtab[cr], SCALEBITS)), d0)];
- b = range_limit[DITHER_565_B(y + Cbbtab[cb], d0)];
- rgb = PACK_SHORT_565(r,g,b);
- *(INT16*)outptr = rgb;
- }
- }
-}
-
-#endif
-
-/**************** Cases other than YCbCr -> RGB(A) **************/
-
-#ifdef ANDROID_RGB
-METHODDEF(void)
-rgb_rgba_8888_convert (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION input_row,
- JSAMPARRAY output_buf, int num_rows)
-{
- register JSAMPROW outptr;
- register JSAMPROW inptr0, inptr1, inptr2;
- register JDIMENSION col;
- JDIMENSION num_cols = cinfo->output_width;
- SHIFT_TEMPS
-
- while (--num_rows >= 0) {
- inptr0 = input_buf[0][input_row];
- inptr1 = input_buf[1][input_row];
- inptr2 = input_buf[2][input_row];
- input_row++;
- outptr = *output_buf++;
- for (col = 0; col < num_cols; col++) {
- *outptr++ = *inptr0++;
- *outptr++ = *inptr1++;
- *outptr++ = *inptr2++;
- *outptr++ = 0xFF;
- }
- }
-}
-
-METHODDEF(void)
-rgb_rgb_565_convert (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION input_row,
- JSAMPARRAY output_buf, int num_rows)
-{
- register JSAMPROW outptr;
- register JSAMPROW inptr0, inptr1, inptr2;
- register JDIMENSION col;
- JDIMENSION num_cols = cinfo->output_width;
- SHIFT_TEMPS
-
- while (--num_rows >= 0) {
- INT32 rgb;
- unsigned int r, g, b;
- inptr0 = input_buf[0][input_row];
- inptr1 = input_buf[1][input_row];
- inptr2 = input_buf[2][input_row];
- input_row++;
- outptr = *output_buf++;
- if (PACK_NEED_ALIGNMENT(outptr)) {
- r = GETJSAMPLE(*inptr0++);
- g = GETJSAMPLE(*inptr1++);
- b = GETJSAMPLE(*inptr2++);
- rgb = PACK_SHORT_565(r,g,b);
- *(INT16*)outptr = rgb;
- outptr += 2;
- num_cols--;
- }
- for (col = 0; col < (num_cols>>1); col++) {
- r = GETJSAMPLE(*inptr0++);
- g = GETJSAMPLE(*inptr1++);
- b = GETJSAMPLE(*inptr2++);
- rgb = PACK_SHORT_565(r,g,b);
- r = GETJSAMPLE(*inptr0++);
- g = GETJSAMPLE(*inptr1++);
- b = GETJSAMPLE(*inptr2++);
- rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b));
- WRITE_TWO_ALIGNED_PIXELS(outptr, rgb);
- outptr += 4;
- }
- if (num_cols&1) {
- r = GETJSAMPLE(*inptr0);
- g = GETJSAMPLE(*inptr1);
- b = GETJSAMPLE(*inptr2);
- rgb = PACK_SHORT_565(r,g,b);
- *(INT16*)outptr = rgb;
- }
- }
-}
-
-
-METHODDEF(void)
-rgb_rgb_565D_convert (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION input_row,
- JSAMPARRAY output_buf, int num_rows)
-{
- register JSAMPROW outptr;
- register JSAMPROW inptr0, inptr1, inptr2;
- register JDIMENSION col;
- register JSAMPLE * range_limit = cinfo->sample_range_limit;
- JDIMENSION num_cols = cinfo->output_width;
- INT32 d0 = dither_matrix[cinfo->output_scanline & DITHER_MASK];
- SHIFT_TEMPS
-
- while (--num_rows >= 0) {
- INT32 rgb;
- unsigned int r, g, b;
- inptr0 = input_buf[0][input_row];
- inptr1 = input_buf[1][input_row];
- inptr2 = input_buf[2][input_row];
- input_row++;
- outptr = *output_buf++;
- if (PACK_NEED_ALIGNMENT(outptr)) {
- r = range_limit[DITHER_565_R(GETJSAMPLE(*inptr0++), d0)];
- g = range_limit[DITHER_565_G(GETJSAMPLE(*inptr1++), d0)];
- b = range_limit[DITHER_565_B(GETJSAMPLE(*inptr2++), d0)];
- rgb = PACK_SHORT_565(r,g,b);
- *(INT16*)outptr = rgb;
- outptr += 2;
- num_cols--;
- }
- for (col = 0; col < (num_cols>>1); col++) {
- r = range_limit[DITHER_565_R(GETJSAMPLE(*inptr0++), d0)];
- g = range_limit[DITHER_565_G(GETJSAMPLE(*inptr1++), d0)];
- b = range_limit[DITHER_565_B(GETJSAMPLE(*inptr2++), d0)];
- d0 = DITHER_ROTATE(d0);
- rgb = PACK_SHORT_565(r,g,b);
- r = range_limit[DITHER_565_R(GETJSAMPLE(*inptr0++), d0)];
- g = range_limit[DITHER_565_G(GETJSAMPLE(*inptr1++), d0)];
- b = range_limit[DITHER_565_B(GETJSAMPLE(*inptr2++), d0)];
- d0 = DITHER_ROTATE(d0);
- rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b));
- WRITE_TWO_ALIGNED_PIXELS(outptr, rgb);
- outptr += 4;
- }
- if (num_cols&1) {
- r = range_limit[DITHER_565_R(GETJSAMPLE(*inptr0), d0)];
- g = range_limit[DITHER_565_G(GETJSAMPLE(*inptr1), d0)];
- b = range_limit[DITHER_565_B(GETJSAMPLE(*inptr2), d0)];
- rgb = PACK_SHORT_565(r,g,b);
- *(INT16*)outptr = rgb;
- }
- }
-}
-
-#endif
-
-/*
- * Color conversion for no colorspace change: just copy the data,
- * converting from separate-planes to interleaved representation.
- */
-
-METHODDEF(void)
-null_convert (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION input_row,
- JSAMPARRAY output_buf, int num_rows)
-{
- register JSAMPROW inptr, outptr;
- register JDIMENSION count;
- register int num_components = cinfo->num_components;
- JDIMENSION num_cols = cinfo->output_width;
- int ci;
-
- while (--num_rows >= 0) {
- for (ci = 0; ci < num_components; ci++) {
- inptr = input_buf[ci][input_row];
- outptr = output_buf[0] + ci;
- for (count = num_cols; count > 0; count--) {
- *outptr = *inptr++; /* needn't bother with GETJSAMPLE() here */
- outptr += num_components;
- }
- }
- input_row++;
- output_buf++;
- }
-}
-
-
-/*
- * Color conversion for grayscale: just copy the data.
- * This also works for YCbCr -> grayscale conversion, in which
- * we just copy the Y (luminance) component and ignore chrominance.
- */
-
-METHODDEF(void)
-grayscale_convert (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION input_row,
- JSAMPARRAY output_buf, int num_rows)
-{
- jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0,
- num_rows, cinfo->output_width);
-}
-
-
-/*
- * Convert grayscale to RGB: just duplicate the graylevel three times.
- * This is provided to support applications that don't want to cope
- * with grayscale as a separate case.
- */
-
-METHODDEF(void)
-gray_rgb_convert (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION input_row,
- JSAMPARRAY output_buf, int num_rows)
-{
- register JSAMPROW inptr, outptr;
- register JDIMENSION col;
- JDIMENSION num_cols = cinfo->output_width;
-
- while (--num_rows >= 0) {
- inptr = input_buf[0][input_row++];
- outptr = *output_buf++;
- for (col = 0; col < num_cols; col++) {
- /* We can dispense with GETJSAMPLE() here */
- outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col];
- outptr += RGB_PIXELSIZE;
- }
- }
-}
-
-#ifdef ANDROID_RGB
-METHODDEF(void)
-gray_rgba_8888_convert (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION input_row,
- JSAMPARRAY output_buf, int num_rows)
-{
- register JSAMPROW inptr, outptr;
- register JDIMENSION col;
- JDIMENSION num_cols = cinfo->output_width;
-
- while (--num_rows >= 0) {
- inptr = input_buf[0][input_row++];
- outptr = *output_buf++;
- for (col = 0; col < num_cols; col++) {
- /* We can dispense with GETJSAMPLE() here */
- outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col];
- outptr[RGB_ALPHA] = 0xff;
- outptr += 4;
- }
- }
-}
-
-METHODDEF(void)
-gray_rgb_565_convert (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION input_row,
- JSAMPARRAY output_buf, int num_rows)
-{
- register JSAMPROW inptr, outptr;
- register JDIMENSION col;
- JDIMENSION num_cols = cinfo->output_width;
-
- while (--num_rows >= 0) {
- INT32 rgb;
- unsigned int g;
- inptr = input_buf[0][input_row++];
- outptr = *output_buf++;
- if (PACK_NEED_ALIGNMENT(outptr)) {
- g = *inptr++;
- rgb = PACK_SHORT_565(g, g, g);
- *(INT16*)outptr = rgb;
- outptr += 2;
- num_cols--;
- }
- for (col = 0; col < (num_cols>>1); col++) {
- g = *inptr++;
- rgb = PACK_SHORT_565(g, g, g);
- g = *inptr++;
- rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(g, g, g));
- WRITE_TWO_ALIGNED_PIXELS(outptr, rgb);
- outptr += 4;
- }
- if (num_cols&1) {
- g = *inptr;
- rgb = PACK_SHORT_565(g, g, g);
- *(INT16*)outptr = rgb;
- }
- }
-}
-
-METHODDEF(void)
-gray_rgb_565D_convert (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION input_row,
- JSAMPARRAY output_buf, int num_rows)
-{
- register JSAMPROW inptr, outptr;
- register JDIMENSION col;
- register JSAMPLE * range_limit = cinfo->sample_range_limit;
- JDIMENSION num_cols = cinfo->output_width;
- INT32 d0 = dither_matrix[cinfo->output_scanline & DITHER_MASK];
-
- while (--num_rows >= 0) {
- INT32 rgb;
- unsigned int g;
- inptr = input_buf[0][input_row++];
- outptr = *output_buf++;
- if (PACK_NEED_ALIGNMENT(outptr)) {
- g = *inptr++;
- g = range_limit[DITHER_565_R(g, d0)];
- rgb = PACK_SHORT_565(g, g, g);
- *(INT16*)outptr = rgb;
- outptr += 2;
- num_cols--;
- }
- for (col = 0; col < (num_cols>>1); col++) {
- g = *inptr++;
- g = range_limit[DITHER_565_R(g, d0)];
- rgb = PACK_SHORT_565(g, g, g);
- d0 = DITHER_ROTATE(d0);
- g = *inptr++;
- g = range_limit[DITHER_565_R(g, d0)];
- rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(g, g, g));
- d0 = DITHER_ROTATE(d0);
- WRITE_TWO_ALIGNED_PIXELS(outptr, rgb);
- outptr += 4;
- }
- if (num_cols&1) {
- g = *inptr;
- g = range_limit[DITHER_565_R(g, d0)];
- rgb = PACK_SHORT_565(g, g, g);
- *(INT16*)outptr = rgb;
- }
- }
-}
-#endif
-
-/*
- * Adobe-style YCCK->CMYK conversion.
- * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same
- * conversion as above, while passing K (black) unchanged.
- * We assume build_ycc_rgb_table has been called.
- */
-
-METHODDEF(void)
-ycck_cmyk_convert (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION input_row,
- JSAMPARRAY output_buf, int num_rows)
-{
- my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
- register int y, cb, cr;
- register JSAMPROW outptr;
- register JSAMPROW inptr0, inptr1, inptr2, inptr3;
- register JDIMENSION col;
- JDIMENSION num_cols = cinfo->output_width;
- /* copy these pointers into registers if possible */
- register JSAMPLE * range_limit = cinfo->sample_range_limit;
- register int * Crrtab = cconvert->Cr_r_tab;
- register int * Cbbtab = cconvert->Cb_b_tab;
- register INT32 * Crgtab = cconvert->Cr_g_tab;
- register INT32 * Cbgtab = cconvert->Cb_g_tab;
- SHIFT_TEMPS
-
- while (--num_rows >= 0) {
- inptr0 = input_buf[0][input_row];
- inptr1 = input_buf[1][input_row];
- inptr2 = input_buf[2][input_row];
- inptr3 = input_buf[3][input_row];
- input_row++;
- outptr = *output_buf++;
- for (col = 0; col < num_cols; col++) {
- y = GETJSAMPLE(inptr0[col]);
- cb = GETJSAMPLE(inptr1[col]);
- cr = GETJSAMPLE(inptr2[col]);
- /* Range-limiting is essential due to noise introduced by DCT losses. */
- outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])]; /* red */
- outptr[1] = range_limit[MAXJSAMPLE - (y + /* green */
- ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
- SCALEBITS)))];
- outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])]; /* blue */
- /* K passes through unchanged */
- outptr[3] = inptr3[col]; /* don't need GETJSAMPLE here */
- outptr += 4;
- }
- }
-}
-
-
-/*
- * Empty method for start_pass.
- */
-
-METHODDEF(void)
-start_pass_dcolor (j_decompress_ptr cinfo)
-{
- /* no work needed */
-}
-
-
-/*
- * Module initialization routine for output colorspace conversion.
- */
-
-GLOBAL(void)
-jinit_color_deconverter (j_decompress_ptr cinfo)
-{
- my_cconvert_ptr cconvert;
- int ci;
-
- cconvert = (my_cconvert_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_color_deconverter));
- cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert;
- cconvert->pub.start_pass = start_pass_dcolor;
-
- /* Make sure num_components agrees with jpeg_color_space */
- switch (cinfo->jpeg_color_space) {
- case JCS_GRAYSCALE:
- if (cinfo->num_components != 1)
- ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
- break;
-
- case JCS_RGB:
- case JCS_YCbCr:
- if (cinfo->num_components != 3)
- ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
- break;
-
- case JCS_CMYK:
- case JCS_YCCK:
- if (cinfo->num_components != 4)
- ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
- break;
-
- default: /* JCS_UNKNOWN can be anything */
- if (cinfo->num_components < 1)
- ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
- break;
- }
-
- /* Set out_color_components and conversion method based on requested space.
- * Also clear the component_needed flags for any unused components,
- * so that earlier pipeline stages can avoid useless computation.
- */
-
- switch (cinfo->out_color_space) {
- case JCS_GRAYSCALE:
- cinfo->out_color_components = 1;
- if (cinfo->jpeg_color_space == JCS_GRAYSCALE ||
- cinfo->jpeg_color_space == JCS_YCbCr) {
- cconvert->pub.color_convert = grayscale_convert;
- /* For color->grayscale conversion, only the Y (0) component is needed */
- for (ci = 1; ci < cinfo->num_components; ci++)
- cinfo->comp_info[ci].component_needed = FALSE;
- } else
- ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
- break;
-
- case JCS_RGB:
- cinfo->out_color_components = RGB_PIXELSIZE;
- if (cinfo->jpeg_color_space == JCS_YCbCr) {
- cconvert->pub.color_convert = ycc_rgb_convert;
-#ifndef ANDROID_JPEG_USE_VENUM
- build_ycc_rgb_table(cinfo);
-#endif
- } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
- cconvert->pub.color_convert = gray_rgb_convert;
- } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) {
- cconvert->pub.color_convert = null_convert;
- } else
- ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
- break;
-
-#ifdef ANDROID_RGB
- case JCS_RGBA_8888:
- cinfo->out_color_components = 4;
- if (cinfo->jpeg_color_space == JCS_YCbCr) {
- cconvert->pub.color_convert = ycc_rgba_8888_convert;
- build_ycc_rgb_table(cinfo);
- } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
- cconvert->pub.color_convert = gray_rgba_8888_convert;
- } else if (cinfo->jpeg_color_space == JCS_RGB) {
- cconvert->pub.color_convert = rgb_rgba_8888_convert;
- } else
- ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
- break;
-
- case JCS_RGB_565:
- cinfo->out_color_components = RGB_PIXELSIZE;
- if (cinfo->dither_mode == JDITHER_NONE) {
- if (cinfo->jpeg_color_space == JCS_YCbCr) {
- cconvert->pub.color_convert = ycc_rgb_565_convert;
-#if !defined(ANDROID_JPEG_USE_VENUM)
- build_ycc_rgb_table(cinfo);
-#endif /* ANDROID_JPEG_USE_VENUM */
- } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
- cconvert->pub.color_convert = gray_rgb_565_convert;
- } else if (cinfo->jpeg_color_space == JCS_RGB) {
- cconvert->pub.color_convert = rgb_rgb_565_convert;
- } else
- ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
- } else {
- /* only ordered dither is supported */
- if (cinfo->jpeg_color_space == JCS_YCbCr) {
-#if defined(ANDROID_JPEG_USE_VENUM)
- /* Use VeNum routine even if dithering option is selected. */
- cconvert->pub.color_convert = ycc_rgb_565_convert;
-#else
- cconvert->pub.color_convert = ycc_rgb_565D_convert;
- build_ycc_rgb_table(cinfo);
-#endif /* ANDROID_JPEG_USE_VENUM */
- } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
- cconvert->pub.color_convert = gray_rgb_565D_convert;
- } else if (cinfo->jpeg_color_space == JCS_RGB) {
- cconvert->pub.color_convert = rgb_rgb_565D_convert;
- } else
- ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
- }
- break;
-#endif
-
- case JCS_CMYK:
- cinfo->out_color_components = 4;
- if (cinfo->jpeg_color_space == JCS_YCCK) {
- cconvert->pub.color_convert = ycck_cmyk_convert;
- build_ycc_rgb_table(cinfo);
- } else if (cinfo->jpeg_color_space == JCS_CMYK) {
- cconvert->pub.color_convert = null_convert;
- } else
- ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
- break;
-
- default:
- /* Permit null conversion to same output space */
- if (cinfo->out_color_space == cinfo->jpeg_color_space) {
- cinfo->out_color_components = cinfo->num_components;
- cconvert->pub.color_convert = null_convert;
- } else /* unsupported non-null conversion */
- ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
- break;
- }
-
- if (cinfo->quantize_colors)
- cinfo->output_components = 1; /* single colormapped output component */
- else
- cinfo->output_components = cinfo->out_color_components;
-}
diff --git a/libjpegtwrp/jdct.h b/libjpegtwrp/jdct.h
deleted file mode 100644
index 04192a266..000000000
--- a/libjpegtwrp/jdct.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * jdct.h
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This include file contains common declarations for the forward and
- * inverse DCT modules. These declarations are private to the DCT managers
- * (jcdctmgr.c, jddctmgr.c) and the individual DCT algorithms.
- * The individual DCT algorithms are kept in separate files to ease
- * machine-dependent tuning (e.g., assembly coding).
- */
-
-
-/*
- * A forward DCT routine is given a pointer to a work area of type DCTELEM[];
- * the DCT is to be performed in-place in that buffer. Type DCTELEM is int
- * for 8-bit samples, INT32 for 12-bit samples. (NOTE: Floating-point DCT
- * implementations use an array of type FAST_FLOAT, instead.)
- * The DCT inputs are expected to be signed (range +-CENTERJSAMPLE).
- * The DCT outputs are returned scaled up by a factor of 8; they therefore
- * have a range of +-8K for 8-bit data, +-128K for 12-bit data. This
- * convention improves accuracy in integer implementations and saves some
- * work in floating-point ones.
- * Quantization of the output coefficients is done by jcdctmgr.c.
- */
-
-#if BITS_IN_JSAMPLE == 8
-typedef int DCTELEM; /* 16 or 32 bits is fine */
-#else
-typedef INT32 DCTELEM; /* must have 32 bits */
-#endif
-
-typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data));
-typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data));
-
-
-/*
- * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer
- * to an output sample array. The routine must dequantize the input data as
- * well as perform the IDCT; for dequantization, it uses the multiplier table
- * pointed to by compptr->dct_table. The output data is to be placed into the
- * sample array starting at a specified column. (Any row offset needed will
- * be applied to the array pointer before it is passed to the IDCT code.)
- * Note that the number of samples emitted by the IDCT routine is
- * DCT_scaled_size * DCT_scaled_size.
- */
-
-/* typedef inverse_DCT_method_ptr is declared in jpegint.h */
-
-/*
- * Each IDCT routine has its own ideas about the best dct_table element type.
- */
-
-typedef MULTIPLIER ISLOW_MULT_TYPE; /* short or int, whichever is faster */
-#if BITS_IN_JSAMPLE == 8
-typedef MULTIPLIER IFAST_MULT_TYPE; /* 16 bits is OK, use short if faster */
-#define IFAST_SCALE_BITS 2 /* fractional bits in scale factors */
-#else
-typedef INT32 IFAST_MULT_TYPE; /* need 32 bits for scaled quantizers */
-#define IFAST_SCALE_BITS 13 /* fractional bits in scale factors */
-#endif
-typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */
-
-
-/*
- * Each IDCT routine is responsible for range-limiting its results and
- * converting them to unsigned form (0..MAXJSAMPLE). The raw outputs could
- * be quite far out of range if the input data is corrupt, so a bulletproof
- * range-limiting step is required. We use a mask-and-table-lookup method
- * to do the combined operations quickly. See the comments with
- * prepare_range_limit_table (in jdmaster.c) for more info.
- */
-
-#define IDCT_range_limit(cinfo) ((cinfo)->sample_range_limit + CENTERJSAMPLE)
-
-#define RANGE_MASK (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */
-
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jpeg_fdct_islow jFDislow
-#define jpeg_fdct_ifast jFDifast
-#define jpeg_fdct_float jFDfloat
-#define jpeg_idct_islow jRDislow
-#define jpeg_idct_ifast jRDifast
-#define jpeg_idct_float jRDfloat
-#define jpeg_idct_4x4 jRD4x4
-#define jpeg_idct_2x2 jRD2x2
-#define jpeg_idct_1x1 jRD1x1
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-/* Extern declarations for the forward and inverse DCT routines. */
-
-EXTERN(void) jpeg_fdct_islow JPP((DCTELEM * data));
-EXTERN(void) jpeg_fdct_ifast JPP((DCTELEM * data));
-EXTERN(void) jpeg_fdct_float JPP((FAST_FLOAT * data));
-
-EXTERN(void) jpeg_idct_islow
- JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
-EXTERN(void) jpeg_idct_ifast
- JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
-EXTERN(void) jpeg_idct_float
- JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
-EXTERN(void) jpeg_idct_4x4
- JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
-EXTERN(void) jpeg_idct_2x2
- JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
-EXTERN(void) jpeg_idct_1x1
- JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
-
-
-/*
- * Macros for handling fixed-point arithmetic; these are used by many
- * but not all of the DCT/IDCT modules.
- *
- * All values are expected to be of type INT32.
- * Fractional constants are scaled left by CONST_BITS bits.
- * CONST_BITS is defined within each module using these macros,
- * and may differ from one module to the next.
- */
-
-#define ONE ((INT32) 1)
-#define CONST_SCALE (ONE << CONST_BITS)
-
-/* Convert a positive real constant to an integer scaled by CONST_SCALE.
- * Caution: some C compilers fail to reduce "FIX(constant)" at compile time,
- * thus causing a lot of useless floating-point operations at run time.
- */
-
-#define FIX(x) ((INT32) ((x) * CONST_SCALE + 0.5))
-
-/* Descale and correctly round an INT32 value that's scaled by N bits.
- * We assume RIGHT_SHIFT rounds towards minus infinity, so adding
- * the fudge factor is correct for either sign of X.
- */
-
-#define DESCALE(x,n) RIGHT_SHIFT((x) + (ONE << ((n)-1)), n)
-
-/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result.
- * This macro is used only when the two inputs will actually be no more than
- * 16 bits wide, so that a 16x16->32 bit multiply can be used instead of a
- * full 32x32 multiply. This provides a useful speedup on many machines.
- * Unfortunately there is no way to specify a 16x16->32 multiply portably
- * in C, but some C compilers will do the right thing if you provide the
- * correct combination of casts.
- */
-
-#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */
-#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT16) (const)))
-#endif
-#ifdef SHORTxLCONST_32 /* known to work with Microsoft C 6.0 */
-#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT32) (const)))
-#endif
-
-#ifndef MULTIPLY16C16 /* default definition */
-#define MULTIPLY16C16(var,const) ((var) * (const))
-#endif
-
-/* Same except both inputs are variables. */
-
-#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */
-#define MULTIPLY16V16(var1,var2) (((INT16) (var1)) * ((INT16) (var2)))
-#endif
-
-#ifndef MULTIPLY16V16 /* default definition */
-#define MULTIPLY16V16(var1,var2) ((var1) * (var2))
-#endif
diff --git a/libjpegtwrp/jddctmgr.c b/libjpegtwrp/jddctmgr.c
deleted file mode 100644
index 674bfa75f..000000000
--- a/libjpegtwrp/jddctmgr.c
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * jddctmgr.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains the inverse-DCT management logic.
- * This code selects a particular IDCT implementation to be used,
- * and it performs related housekeeping chores. No code in this file
- * is executed per IDCT step, only during output pass setup.
- *
- * Note that the IDCT routines are responsible for performing coefficient
- * dequantization as well as the IDCT proper. This module sets up the
- * dequantization multiplier table needed by the IDCT routine.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdct.h" /* Private declarations for DCT subsystem */
-
-#ifdef ANDROID_ARMV6_IDCT
- #undef ANDROID_ARMV6_IDCT
- #ifdef __arm__
- #include <machine/cpu-features.h>
- #if __ARM_ARCH__ >= 6
- #define ANDROID_ARMV6_IDCT
- #else
- #warning "ANDROID_ARMV6_IDCT is disabled"
- #endif
- #endif
-#endif
-
-#ifdef ANDROID_ARMV6_IDCT
-
-/* Intentionally declare the prototype with arguments of primitive types instead
- * of type-defined ones. This will at least generate some warnings if jmorecfg.h
- * is changed and becomes incompatible with the assembly code.
- */
-extern void armv6_idct(short *coefs, int *quans, unsigned char **rows, int col);
-
-void jpeg_idct_armv6 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block,
- JSAMPARRAY output_buf, JDIMENSION output_col)
-{
- IFAST_MULT_TYPE *dct_table = (IFAST_MULT_TYPE *)compptr->dct_table;
- armv6_idct(coef_block, dct_table, output_buf, output_col);
-}
-
-#endif
-
-/*
- * The decompressor input side (jdinput.c) saves away the appropriate
- * quantization table for each component at the start of the first scan
- * involving that component. (This is necessary in order to correctly
- * decode files that reuse Q-table slots.)
- * When we are ready to make an output pass, the saved Q-table is converted
- * to a multiplier table that will actually be used by the IDCT routine.
- * The multiplier table contents are IDCT-method-dependent. To support
- * application changes in IDCT method between scans, we can remake the
- * multiplier tables if necessary.
- * In buffered-image mode, the first output pass may occur before any data
- * has been seen for some components, and thus before their Q-tables have
- * been saved away. To handle this case, multiplier tables are preset
- * to zeroes; the result of the IDCT will be a neutral gray level.
- */
-
-
-/* Private subobject for this module */
-
-typedef struct {
- struct jpeg_inverse_dct pub; /* public fields */
-
- /* This array contains the IDCT method code that each multiplier table
- * is currently set up for, or -1 if it's not yet set up.
- * The actual multiplier tables are pointed to by dct_table in the
- * per-component comp_info structures.
- */
- int cur_method[MAX_COMPONENTS];
-} my_idct_controller;
-
-typedef my_idct_controller * my_idct_ptr;
-
-
-/* Allocated multiplier tables: big enough for any supported variant */
-
-typedef union {
- ISLOW_MULT_TYPE islow_array[DCTSIZE2];
-#ifdef DCT_IFAST_SUPPORTED
- IFAST_MULT_TYPE ifast_array[DCTSIZE2];
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
- FLOAT_MULT_TYPE float_array[DCTSIZE2];
-#endif
-} multiplier_table;
-
-
-/* The current scaled-IDCT routines require ISLOW-style multiplier tables,
- * so be sure to compile that code if either ISLOW or SCALING is requested.
- */
-#ifdef DCT_ISLOW_SUPPORTED
-#define PROVIDE_ISLOW_TABLES
-#else
-#ifdef IDCT_SCALING_SUPPORTED
-#define PROVIDE_ISLOW_TABLES
-#endif
-#endif
-
-
-/*
- * Prepare for an output pass.
- * Here we select the proper IDCT routine for each component and build
- * a matching multiplier table.
- */
-
-METHODDEF(void)
-start_pass (j_decompress_ptr cinfo)
-{
- my_idct_ptr idct = (my_idct_ptr) cinfo->idct;
- int ci, i;
- jpeg_component_info *compptr;
- int method = 0;
- inverse_DCT_method_ptr method_ptr = NULL;
- JQUANT_TBL * qtbl;
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- /* Select the proper IDCT routine for this component's scaling */
- switch (compptr->DCT_scaled_size) {
-#ifdef IDCT_SCALING_SUPPORTED
- case 1:
- method_ptr = jpeg_idct_1x1;
- method = JDCT_ISLOW; /* jidctred uses islow-style table */
- break;
- case 2:
- method_ptr = jpeg_idct_2x2;
- method = JDCT_ISLOW; /* jidctred uses islow-style table */
- break;
- case 4:
- method_ptr = jpeg_idct_4x4;
- method = JDCT_ISLOW; /* jidctred uses islow-style table */
- break;
-#endif
- case DCTSIZE:
- switch (cinfo->dct_method) {
-#ifdef ANDROID_ARMV6_IDCT
- case JDCT_ISLOW:
- case JDCT_IFAST:
- method_ptr = jpeg_idct_armv6;
- method = JDCT_IFAST;
- break;
-#else /* ANDROID_ARMV6_IDCT */
-#ifdef DCT_ISLOW_SUPPORTED
- case JDCT_ISLOW:
- method_ptr = jpeg_idct_islow;
- method = JDCT_ISLOW;
- break;
-#endif
-#ifdef DCT_IFAST_SUPPORTED
- case JDCT_IFAST:
-#ifdef ANDROID_JPEG_USE_VENUM
- /* Use VeNum implementation of jpeg_idct_islow even if fast DCT option is selected */
- method_ptr = jpeg_idct_islow;
- method = JDCT_ISLOW;
-#else
- method_ptr = jpeg_idct_ifast;
- method = JDCT_IFAST;
-#endif /* ANDROID_JPEG_USE_VENUM */
- break;
-#endif
-#endif /* ANDROID_ARMV6_IDCT */
-#ifdef DCT_FLOAT_SUPPORTED
- case JDCT_FLOAT:
- method_ptr = jpeg_idct_float;
- method = JDCT_FLOAT;
- break;
-#endif
- default:
- ERREXIT(cinfo, JERR_NOT_COMPILED);
- break;
- }
- break;
- default:
- ERREXIT1(cinfo, JERR_BAD_DCTSIZE, compptr->DCT_scaled_size);
- break;
- }
- idct->pub.inverse_DCT[ci] = method_ptr;
- /* Create multiplier table from quant table.
- * However, we can skip this if the component is uninteresting
- * or if we already built the table. Also, if no quant table
- * has yet been saved for the component, we leave the
- * multiplier table all-zero; we'll be reading zeroes from the
- * coefficient controller's buffer anyway.
- */
- if (! compptr->component_needed || idct->cur_method[ci] == method)
- continue;
- qtbl = compptr->quant_table;
- if (qtbl == NULL) /* happens if no data yet for component */
- continue;
- idct->cur_method[ci] = method;
- switch (method) {
-#ifdef PROVIDE_ISLOW_TABLES
- case JDCT_ISLOW:
- {
- /* For LL&M IDCT method, multipliers are equal to raw quantization
- * coefficients, but are stored as ints to ensure access efficiency.
- */
- ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table;
- for (i = 0; i < DCTSIZE2; i++) {
- ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i];
- }
- }
- break;
-#endif
-#ifdef DCT_IFAST_SUPPORTED
- case JDCT_IFAST:
- {
- /* For AA&N IDCT method, multipliers are equal to quantization
- * coefficients scaled by scalefactor[row]*scalefactor[col], where
- * scalefactor[0] = 1
- * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7
- * For integer operation, the multiplier table is to be scaled by
- * IFAST_SCALE_BITS.
- */
- IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table;
-#ifdef ANDROID_ARMV6_IDCT
- /* Precomputed values scaled up by 15 bits. */
- static const unsigned short scales[DCTSIZE2] = {
- 32768, 45451, 42813, 38531, 32768, 25746, 17734, 9041,
- 45451, 63042, 59384, 53444, 45451, 35710, 24598, 12540,
- 42813, 59384, 55938, 50343, 42813, 33638, 23170, 11812,
- 38531, 53444, 50343, 45308, 38531, 30274, 20853, 10631,
- 32768, 45451, 42813, 38531, 32768, 25746, 17734, 9041,
- 25746, 35710, 33638, 30274, 25746, 20228, 13933, 7103,
- 17734, 24598, 23170, 20853, 17734, 13933, 9598, 4893,
- 9041, 12540, 11812, 10631, 9041, 7103, 4893, 2494,
- };
- /* Inverse map of [7, 5, 1, 3, 0, 2, 4, 6]. */
- static const char orders[DCTSIZE] = {4, 2, 5, 3, 6, 1, 7, 0};
- /* Reorder the columns after transposing. */
- for (i = 0; i < DCTSIZE2; ++i) {
- int j = ((i & 7) << 3) + orders[i >> 3];
- ifmtbl[j] = (qtbl->quantval[i] * scales[i] + 2) >> 2;
- }
-#else /* ANDROID_ARMV6_IDCT */
-
-#define CONST_BITS 14
- static const INT16 aanscales[DCTSIZE2] = {
- /* precomputed values scaled up by 14 bits */
- 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520,
- 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270,
- 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906,
- 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315,
- 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520,
- 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552,
- 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446,
- 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247
- };
- SHIFT_TEMPS
-
- for (i = 0; i < DCTSIZE2; i++) {
- ifmtbl[i] = (IFAST_MULT_TYPE)
- DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
- (INT32) aanscales[i]),
- CONST_BITS-IFAST_SCALE_BITS);
- }
-#endif /* ANDROID_ARMV6_IDCT */
- }
- break;
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
- case JDCT_FLOAT:
- {
- /* For float AA&N IDCT method, multipliers are equal to quantization
- * coefficients scaled by scalefactor[row]*scalefactor[col], where
- * scalefactor[0] = 1
- * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7
- */
- FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table;
- int row, col;
- static const double aanscalefactor[DCTSIZE] = {
- 1.0, 1.387039845, 1.306562965, 1.175875602,
- 1.0, 0.785694958, 0.541196100, 0.275899379
- };
-
- i = 0;
- for (row = 0; row < DCTSIZE; row++) {
- for (col = 0; col < DCTSIZE; col++) {
- fmtbl[i] = (FLOAT_MULT_TYPE)
- ((double) qtbl->quantval[i] *
- aanscalefactor[row] * aanscalefactor[col]);
- i++;
- }
- }
- }
- break;
-#endif
- default:
- ERREXIT(cinfo, JERR_NOT_COMPILED);
- break;
- }
- }
-}
-
-
-/*
- * Initialize IDCT manager.
- */
-
-GLOBAL(void)
-jinit_inverse_dct (j_decompress_ptr cinfo)
-{
- my_idct_ptr idct;
- int ci;
- jpeg_component_info *compptr;
-
- idct = (my_idct_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_idct_controller));
- cinfo->idct = (struct jpeg_inverse_dct *) idct;
- idct->pub.start_pass = start_pass;
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- /* Allocate and pre-zero a multiplier table for each component */
- compptr->dct_table =
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(multiplier_table));
- MEMZERO(compptr->dct_table, SIZEOF(multiplier_table));
- /* Mark multiplier table not yet set up for any method */
- idct->cur_method[ci] = -1;
- }
-}
diff --git a/libjpegtwrp/jdhuff.c b/libjpegtwrp/jdhuff.c
deleted file mode 100644
index bc5d4fdd2..000000000
--- a/libjpegtwrp/jdhuff.c
+++ /dev/null
@@ -1,894 +0,0 @@
-/*
- * jdhuff.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains Huffman entropy decoding routines.
- *
- * Much of the complexity here has to do with supporting input suspension.
- * If the data source module demands suspension, we want to be able to back
- * up to the start of the current MCU. To do this, we copy state variables
- * into local working storage, and update them back to the permanent
- * storage only upon successful completion of an MCU.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdhuff.h" /* Declarations shared with jdphuff.c */
-
-LOCAL(boolean) process_restart (j_decompress_ptr cinfo);
-
-
-/*
- * Expanded entropy decoder object for Huffman decoding.
- *
- * The savable_state subrecord contains fields that change within an MCU,
- * but must not be updated permanently until we complete the MCU.
- */
-
-typedef struct {
- int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
-} savable_state;
-
-/* This macro is to work around compilers with missing or broken
- * structure assignment. You'll need to fix this code if you have
- * such a compiler and you change MAX_COMPS_IN_SCAN.
- */
-
-#ifndef NO_STRUCT_ASSIGN
-#define ASSIGN_STATE(dest,src) ((dest) = (src))
-#else
-#if MAX_COMPS_IN_SCAN == 4
-#define ASSIGN_STATE(dest,src) \
- ((dest).last_dc_val[0] = (src).last_dc_val[0], \
- (dest).last_dc_val[1] = (src).last_dc_val[1], \
- (dest).last_dc_val[2] = (src).last_dc_val[2], \
- (dest).last_dc_val[3] = (src).last_dc_val[3])
-#endif
-#endif
-
-
-typedef struct {
- struct jpeg_entropy_decoder pub; /* public fields */
-
- /* These fields are loaded into local variables at start of each MCU.
- * In case of suspension, we exit WITHOUT updating them.
- */
- bitread_perm_state bitstate; /* Bit buffer at start of MCU */
- savable_state saved; /* Other state at start of MCU */
-
- /* These fields are NOT loaded into local working state. */
- unsigned int restarts_to_go; /* MCUs left in this restart interval */
-
- /* Pointers to derived tables (these workspaces have image lifespan) */
- d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS];
- d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS];
-
- /* Precalculated info set up by start_pass for use in decode_mcu: */
-
- /* Pointers to derived tables to be used for each block within an MCU */
- d_derived_tbl * dc_cur_tbls[D_MAX_BLOCKS_IN_MCU];
- d_derived_tbl * ac_cur_tbls[D_MAX_BLOCKS_IN_MCU];
- /* Whether we care about the DC and AC coefficient values for each block */
- boolean dc_needed[D_MAX_BLOCKS_IN_MCU];
- boolean ac_needed[D_MAX_BLOCKS_IN_MCU];
-} huff_entropy_decoder;
-
-typedef huff_entropy_decoder * huff_entropy_ptr;
-
-/*
- * Initialize for a Huffman-compressed scan.
- */
-
-METHODDEF(void)
-start_pass_huff_decoder (j_decompress_ptr cinfo)
-{
- huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
- int ci, blkn, dctbl, actbl;
- jpeg_component_info * compptr;
-
- /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG.
- * This ought to be an error condition, but we make it a warning because
- * there are some baseline files out there with all zeroes in these bytes.
- */
- if (cinfo->Ss != 0 || cinfo->Se != DCTSIZE2-1 ||
- cinfo->Ah != 0 || cinfo->Al != 0)
- WARNMS(cinfo, JWRN_NOT_SEQUENTIAL);
-
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- dctbl = compptr->dc_tbl_no;
- actbl = compptr->ac_tbl_no;
- /* Compute derived values for Huffman tables */
- /* We may do this more than once for a table, but it's not expensive */
- jpeg_make_d_derived_tbl(cinfo, TRUE, dctbl,
- & entropy->dc_derived_tbls[dctbl]);
- jpeg_make_d_derived_tbl(cinfo, FALSE, actbl,
- & entropy->ac_derived_tbls[actbl]);
- /* Initialize DC predictions to 0 */
- entropy->saved.last_dc_val[ci] = 0;
- }
-
- /* Precalculate decoding info for each block in an MCU of this scan */
- for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
- ci = cinfo->MCU_membership[blkn];
- compptr = cinfo->cur_comp_info[ci];
- /* Precalculate which table to use for each block */
- entropy->dc_cur_tbls[blkn] = entropy->dc_derived_tbls[compptr->dc_tbl_no];
- entropy->ac_cur_tbls[blkn] = entropy->ac_derived_tbls[compptr->ac_tbl_no];
- /* Decide whether we really care about the coefficient values */
- if (compptr->component_needed) {
- entropy->dc_needed[blkn] = TRUE;
- /* we don't need the ACs if producing a 1/8th-size image */
- entropy->ac_needed[blkn] = (compptr->DCT_scaled_size > 1);
- } else {
- entropy->dc_needed[blkn] = entropy->ac_needed[blkn] = FALSE;
- }
- }
-
- /* Initialize bitread state variables */
- entropy->bitstate.bits_left = 0;
- entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */
- entropy->pub.insufficient_data = FALSE;
-
- /* Initialize restart counter */
- entropy->restarts_to_go = cinfo->restart_interval;
-}
-
-
-/*
- * Compute the derived values for a Huffman table.
- * This routine also performs some validation checks on the table.
- *
- * Note this is also used by jdphuff.c.
- */
-
-GLOBAL(void)
-jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, boolean isDC, int tblno,
- d_derived_tbl ** pdtbl)
-{
- JHUFF_TBL *htbl;
- d_derived_tbl *dtbl;
- int p, i, l, si, numsymbols;
- int lookbits, ctr;
- char huffsize[257];
- unsigned int huffcode[257];
- unsigned int code;
-
- /* Note that huffsize[] and huffcode[] are filled in code-length order,
- * paralleling the order of the symbols themselves in htbl->huffval[].
- */
-
- /* Find the input Huffman table */
- if (tblno < 0 || tblno >= NUM_HUFF_TBLS)
- ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
- htbl =
- isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno];
- if (htbl == NULL)
- ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
-
- /* Allocate a workspace if we haven't already done so. */
- if (*pdtbl == NULL)
- *pdtbl = (d_derived_tbl *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(d_derived_tbl));
- dtbl = *pdtbl;
- dtbl->pub = htbl; /* fill in back link */
-
- /* Figure C.1: make table of Huffman code length for each symbol */
-
- p = 0;
- for (l = 1; l <= 16; l++) {
- i = (int) htbl->bits[l];
- if (i < 0 || p + i > 256) /* protect against table overrun */
- ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
- while (i--)
- huffsize[p++] = (char) l;
- }
- huffsize[p] = 0;
- numsymbols = p;
-
- /* Figure C.2: generate the codes themselves */
- /* We also validate that the counts represent a legal Huffman code tree. */
-
- code = 0;
- si = huffsize[0];
- p = 0;
- while (huffsize[p]) {
- while (((int) huffsize[p]) == si) {
- huffcode[p++] = code;
- code++;
- }
- /* code is now 1 more than the last code used for codelength si; but
- * it must still fit in si bits, since no code is allowed to be all ones.
- */
- if (((INT32) code) >= (((INT32) 1) << si))
- ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
- code <<= 1;
- si++;
- }
-
- /* Figure F.15: generate decoding tables for bit-sequential decoding */
-
- p = 0;
- for (l = 1; l <= 16; l++) {
- if (htbl->bits[l]) {
- /* valoffset[l] = huffval[] index of 1st symbol of code length l,
- * minus the minimum code of length l
- */
- dtbl->valoffset[l] = (INT32) p - (INT32) huffcode[p];
- p += htbl->bits[l];
- dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */
- } else {
- dtbl->maxcode[l] = -1; /* -1 if no codes of this length */
- }
- }
- dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */
-
- /* Compute lookahead tables to speed up decoding.
- * First we set all the table entries to 0, indicating "too long";
- * then we iterate through the Huffman codes that are short enough and
- * fill in all the entries that correspond to bit sequences starting
- * with that code.
- */
-
- MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits));
-
- p = 0;
- for (l = 1; l <= HUFF_LOOKAHEAD; l++) {
- for (i = 1; i <= (int) htbl->bits[l]; i++, p++) {
- /* l = current code's length, p = its index in huffcode[] & huffval[]. */
- /* Generate left-justified code followed by all possible bit sequences */
- lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l);
- for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) {
- dtbl->look_nbits[lookbits] = l;
- dtbl->look_sym[lookbits] = htbl->huffval[p];
- lookbits++;
- }
- }
- }
-
- /* Validate symbols as being reasonable.
- * For AC tables, we make no check, but accept all byte values 0..255.
- * For DC tables, we require the symbols to be in range 0..15.
- * (Tighter bounds could be applied depending on the data depth and mode,
- * but this is sufficient to ensure safe decoding.)
- */
- if (isDC) {
- for (i = 0; i < numsymbols; i++) {
- int sym = htbl->huffval[i];
- if (sym < 0 || sym > 15)
- ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
- }
- }
-}
-
-
-/*
- * Out-of-line code for bit fetching (shared with jdphuff.c).
- * See jdhuff.h for info about usage.
- * Note: current values of get_buffer and bits_left are passed as parameters,
- * but are returned in the corresponding fields of the state struct.
- *
- * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width
- * of get_buffer to be used. (On machines with wider words, an even larger
- * buffer could be used.) However, on some machines 32-bit shifts are
- * quite slow and take time proportional to the number of places shifted.
- * (This is true with most PC compilers, for instance.) In this case it may
- * be a win to set MIN_GET_BITS to the minimum value of 15. This reduces the
- * average shift distance at the cost of more calls to jpeg_fill_bit_buffer.
- */
-
-#ifdef SLOW_SHIFT_32
-#define MIN_GET_BITS 15 /* minimum allowable value */
-#else
-#define MIN_GET_BITS (BIT_BUF_SIZE-7)
-#endif
-
-
-GLOBAL(boolean)
-jpeg_fill_bit_buffer (bitread_working_state * state,
- register bit_buf_type get_buffer, register int bits_left,
- int nbits)
-/* Load up the bit buffer to a depth of at least nbits */
-{
- /* Copy heavily used state fields into locals (hopefully registers) */
- register const JOCTET * next_input_byte = state->next_input_byte;
- register size_t bytes_in_buffer = state->bytes_in_buffer;
- j_decompress_ptr cinfo = state->cinfo;
-
- /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */
- /* (It is assumed that no request will be for more than that many bits.) */
- /* We fail to do so only if we hit a marker or are forced to suspend. */
-
- if (cinfo->unread_marker == 0) { /* cannot advance past a marker */
- while (bits_left < MIN_GET_BITS) {
- register int c;
-
- /* Attempt to read a byte */
- if (bytes_in_buffer == 0) {
- if (! (*cinfo->src->fill_input_buffer) (cinfo))
- return FALSE;
- next_input_byte = cinfo->src->next_input_byte;
- bytes_in_buffer = cinfo->src->bytes_in_buffer;
- }
- bytes_in_buffer--;
- c = GETJOCTET(*next_input_byte++);
-
- /* If it's 0xFF, check and discard stuffed zero byte */
- if (c == 0xFF) {
- /* Loop here to discard any padding FF's on terminating marker,
- * so that we can save a valid unread_marker value. NOTE: we will
- * accept multiple FF's followed by a 0 as meaning a single FF data
- * byte. This data pattern is not valid according to the standard.
- */
- do {
- if (bytes_in_buffer == 0) {
- if (! (*cinfo->src->fill_input_buffer) (cinfo))
- return FALSE;
- next_input_byte = cinfo->src->next_input_byte;
- bytes_in_buffer = cinfo->src->bytes_in_buffer;
- }
- bytes_in_buffer--;
- c = GETJOCTET(*next_input_byte++);
- } while (c == 0xFF);
-
- if (c == 0) {
- /* Found FF/00, which represents an FF data byte */
- c = 0xFF;
- } else {
- /* Oops, it's actually a marker indicating end of compressed data.
- * Save the marker code for later use.
- * Fine point: it might appear that we should save the marker into
- * bitread working state, not straight into permanent state. But
- * once we have hit a marker, we cannot need to suspend within the
- * current MCU, because we will read no more bytes from the data
- * source. So it is OK to update permanent state right away.
- */
- cinfo->unread_marker = c;
- /* See if we need to insert some fake zero bits. */
- goto no_more_bytes;
- }
- }
-
- /* OK, load c into get_buffer */
- get_buffer = (get_buffer << 8) | c;
- bits_left += 8;
- } /* end while */
- } else {
- no_more_bytes:
- /* We get here if we've read the marker that terminates the compressed
- * data segment. There should be enough bits in the buffer register
- * to satisfy the request; if so, no problem.
- */
- if (nbits > bits_left) {
- /* Uh-oh. Report corrupted data to user and stuff zeroes into
- * the data stream, so that we can produce some kind of image.
- * We use a nonvolatile flag to ensure that only one warning message
- * appears per data segment.
- */
- if (! cinfo->entropy->insufficient_data) {
- WARNMS(cinfo, JWRN_HIT_MARKER);
- cinfo->entropy->insufficient_data = TRUE;
- }
- /* Fill the buffer with zero bits */
- get_buffer <<= MIN_GET_BITS - bits_left;
- bits_left = MIN_GET_BITS;
- }
- }
-
- /* Unload the local registers */
- state->next_input_byte = next_input_byte;
- state->bytes_in_buffer = bytes_in_buffer;
- state->get_buffer = get_buffer;
- state->bits_left = bits_left;
-
- return TRUE;
-}
-
-
-/*
- * Out-of-line code for Huffman code decoding.
- * See jdhuff.h for info about usage.
- */
-
-GLOBAL(int)
-jpeg_huff_decode (bitread_working_state * state,
- register bit_buf_type get_buffer, register int bits_left,
- d_derived_tbl * htbl, int min_bits)
-{
- register int l = min_bits;
- register INT32 code;
-
- /* HUFF_DECODE has determined that the code is at least min_bits */
- /* bits long, so fetch that many bits in one swoop. */
-
- CHECK_BIT_BUFFER(*state, l, return -1);
- code = GET_BITS(l);
-
- /* Collect the rest of the Huffman code one bit at a time. */
- /* This is per Figure F.16 in the JPEG spec. */
-
- while (code > htbl->maxcode[l]) {
- code <<= 1;
- CHECK_BIT_BUFFER(*state, 1, return -1);
- code |= GET_BITS(1);
- l++;
- }
-
- /* Unload the local registers */
- state->get_buffer = get_buffer;
- state->bits_left = bits_left;
-
- /* With garbage input we may reach the sentinel value l = 17. */
-
- if (l > 16) {
- WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE);
- return 0; /* fake a zero as the safest result */
- }
-
- return htbl->pub->huffval[ (int) (code + htbl->valoffset[l]) ];
-}
-
-
-/*
- * Figure F.12: extend sign bit.
- * On some machines, a shift and add will be faster than a table lookup.
- */
-
-#ifdef AVOID_TABLES
-
-#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x))
-
-#else
-
-#define HUFF_EXTEND(x,s) ((x) < extend_test[s] ? (x) + extend_offset[s] : (x))
-
-static const int extend_test[16] = /* entry n is 2**(n-1) */
- { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080,
- 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 };
-
-static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */
- { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1,
- ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1,
- ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1,
- ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 };
-
-#endif /* AVOID_TABLES */
-
-
-/*
- * Check for a restart marker & resynchronize decoder.
- * Returns FALSE if must suspend.
- */
-
-LOCAL(boolean)
-process_restart (j_decompress_ptr cinfo)
-{
- huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
- int ci;
-
- /* Throw away any unused bits remaining in bit buffer; */
- /* include any full bytes in next_marker's count of discarded bytes */
- cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8;
- entropy->bitstate.bits_left = 0;
-
- /* Advance past the RSTn marker */
- if (! (*cinfo->marker->read_restart_marker) (cinfo))
- return FALSE;
-
- /* Re-initialize DC predictions to 0 */
- for (ci = 0; ci < cinfo->comps_in_scan; ci++)
- entropy->saved.last_dc_val[ci] = 0;
-
- /* Reset restart counter */
- entropy->restarts_to_go = cinfo->restart_interval;
-
- /* Reset out-of-data flag, unless read_restart_marker left us smack up
- * against a marker. In that case we will end up treating the next data
- * segment as empty, and we can avoid producing bogus output pixels by
- * leaving the flag set.
- */
- if (cinfo->unread_marker == 0)
- entropy->pub.insufficient_data = FALSE;
-
- return TRUE;
-}
-
-/*
- * Save the current Huffman deocde position and the DC coefficients
- * for each component into bitstream_offset and dc_info[], respectively.
- */
-METHODDEF(void)
-get_huffman_decoder_configuration(j_decompress_ptr cinfo,
- huffman_offset_data *offset)
-{
- huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
- short int *dc_info = offset->prev_dc;
- int i;
- jpeg_get_huffman_decoder_configuration(cinfo, offset);
- for (i = 0; i < cinfo->comps_in_scan; i++) {
- dc_info[i] = entropy->saved.last_dc_val[i];
- }
-}
-
-/*
- * Save the current Huffman decoder position and the bit buffer
- * into bitstream_offset and get_buffer, respectively.
- */
-GLOBAL(void)
-jpeg_get_huffman_decoder_configuration(j_decompress_ptr cinfo,
- huffman_offset_data *offset)
-{
- huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
-
- if (cinfo->restart_interval) {
- // We are at the end of a data segment
- if (entropy->restarts_to_go == 0)
- if (! process_restart(cinfo))
- return;
- }
-
- // Save restarts_to_go and next_restart_num
- offset->restarts_to_go = (unsigned short) entropy->restarts_to_go;
- offset->next_restart_num = cinfo->marker->next_restart_num;
-
- offset->bitstream_offset =
- (jget_input_stream_position(cinfo) << LOG_TWO_BIT_BUF_SIZE)
- + entropy->bitstate.bits_left;
-
- offset->get_buffer = entropy->bitstate.get_buffer;
-}
-
-/*
- * Configure the Huffman decoder to decode the image
- * starting from the bitstream position recorded in offset.
- */
-METHODDEF(void)
-configure_huffman_decoder(j_decompress_ptr cinfo, huffman_offset_data offset)
-{
- huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
- short int *dc_info = offset.prev_dc;
- int i;
- jpeg_configure_huffman_decoder(cinfo, offset);
- for (i = 0; i < cinfo->comps_in_scan; i++) {
- entropy->saved.last_dc_val[i] = dc_info[i];
- }
-}
-
-/*
- * Configure the Huffman decoder reader position and bit buffer.
- */
-GLOBAL(void)
-jpeg_configure_huffman_decoder(j_decompress_ptr cinfo,
- huffman_offset_data offset)
-{
- huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
-
- // Restore restarts_to_go and next_restart_num
- cinfo->unread_marker = 0;
- entropy->restarts_to_go = offset.restarts_to_go;
- cinfo->marker->next_restart_num = offset.next_restart_num;
-
- unsigned int bitstream_offset = offset.bitstream_offset;
- int blkn, i;
-
- unsigned int byte_offset = bitstream_offset >> LOG_TWO_BIT_BUF_SIZE;
- unsigned int bit_in_bit_buffer =
- bitstream_offset & ((1 << LOG_TWO_BIT_BUF_SIZE) - 1);
-
- jset_input_stream_position_bit(cinfo, byte_offset,
- bit_in_bit_buffer, offset.get_buffer);
-}
-
-/*
- * Decode and return one MCU's worth of Huffman-compressed coefficients.
- * The coefficients are reordered from zigzag order into natural array order,
- * but are not dequantized.
- *
- * The i'th block of the MCU is stored into the block pointed to by
- * MCU_data[i]. WE ASSUME THIS AREA HAS BEEN ZEROED BY THE CALLER.
- * (Wholesale zeroing is usually a little faster than retail...)
- *
- * Returns FALSE if data source requested suspension. In that case no
- * changes have been made to permanent state. (Exception: some output
- * coefficients may already have been assigned. This is harmless for
- * this module, since we'll just re-assign them on the next call.)
- */
-
-METHODDEF(boolean)
-decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
-{
- huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
- int blkn;
- BITREAD_STATE_VARS;
- savable_state state;
-
- /* Process restart marker if needed; may have to suspend */
- if (cinfo->restart_interval) {
- if (entropy->restarts_to_go == 0)
- if (! process_restart(cinfo))
- return FALSE;
- }
-
- /* If we've run out of data, just leave the MCU set to zeroes.
- * This way, we return uniform gray for the remainder of the segment.
- */
- if (! entropy->pub.insufficient_data) {
- /* Load up working state */
- BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
- ASSIGN_STATE(state, entropy->saved);
-
- /* Outer loop handles each block in the MCU */
-
- for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
- JBLOCKROW block = MCU_data[blkn];
- d_derived_tbl * dctbl = entropy->dc_cur_tbls[blkn];
- d_derived_tbl * actbl = entropy->ac_cur_tbls[blkn];
- register int s, k, r;
-
- /* Decode a single block's worth of coefficients */
-
- /* Section F.2.2.1: decode the DC coefficient difference */
- HUFF_DECODE(s, br_state, dctbl, return FALSE, label1);
- if (s) {
- CHECK_BIT_BUFFER(br_state, s, return FALSE);
- r = GET_BITS(s);
- s = HUFF_EXTEND(r, s);
- }
-
- if (entropy->dc_needed[blkn]) {
- /* Convert DC difference to actual value, update last_dc_val */
- int ci = cinfo->MCU_membership[blkn];
- s += state.last_dc_val[ci];
- state.last_dc_val[ci] = s;
- /* Output the DC coefficient (assumes jpeg_natural_order[0] = 0) */
- (*block)[0] = (JCOEF) s;
- }
-
- if (entropy->ac_needed[blkn]) {
-
- /* Section F.2.2.2: decode the AC coefficients */
- /* Since zeroes are skipped, output area must be cleared beforehand */
- for (k = 1; k < DCTSIZE2; k++) {
- HUFF_DECODE(s, br_state, actbl, return FALSE, label2);
-
- r = s >> 4;
- s &= 15;
-
- if (s) {
- k += r;
- CHECK_BIT_BUFFER(br_state, s, return FALSE);
- r = GET_BITS(s);
- s = HUFF_EXTEND(r, s);
- /* Output coefficient in natural (dezigzagged) order.
- * Note: the extra entries in jpeg_natural_order[] will save us
- * if k >= DCTSIZE2, which could happen if the data is corrupted.
- */
- (*block)[jpeg_natural_order[k]] = (JCOEF) s;
- } else {
- if (r != 15)
- break;
- k += 15;
- }
- }
-
- } else {
-
- /* Section F.2.2.2: decode the AC coefficients */
- /* In this path we just discard the values */
- for (k = 1; k < DCTSIZE2; k++) {
- HUFF_DECODE(s, br_state, actbl, return FALSE, label3);
-
- r = s >> 4;
- s &= 15;
-
- if (s) {
- k += r;
- CHECK_BIT_BUFFER(br_state, s, return FALSE);
- DROP_BITS(s);
- } else {
- if (r != 15)
- break;
- k += 15;
- }
- }
-
- }
- }
-
- /* Completed MCU, so update state */
- BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
- ASSIGN_STATE(entropy->saved, state);
- }
-
- /* Account for restart interval (no-op if not using restarts) */
- entropy->restarts_to_go--;
-
- return TRUE;
-}
-
-/*
- * Decode one MCU's worth of Huffman-compressed coefficients.
- * The propose of this method is to calculate the
- * data length of one MCU in Huffman-coded format.
- * Therefore, all coefficients are discarded.
- */
-
-METHODDEF(boolean)
-decode_mcu_discard_coef (j_decompress_ptr cinfo)
-{
- huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
- int blkn;
- BITREAD_STATE_VARS;
- savable_state state;
-
- /* Process restart marker if needed; may have to suspend */
- if (cinfo->restart_interval) {
- if (entropy->restarts_to_go == 0)
- if (! process_restart(cinfo))
- return FALSE;
- }
-
- if (! entropy->pub.insufficient_data) {
-
- /* Load up working state */
- BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
- ASSIGN_STATE(state, entropy->saved);
-
- /* Outer loop handles each block in the MCU */
-
- for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
- d_derived_tbl * dctbl = entropy->dc_cur_tbls[blkn];
- d_derived_tbl * actbl = entropy->ac_cur_tbls[blkn];
- register int s, k, r;
-
- /* Decode a single block's worth of coefficients */
-
- /* Section F.2.2.1: decode the DC coefficient difference */
- HUFF_DECODE(s, br_state, dctbl, return FALSE, label1);
- if (s) {
- CHECK_BIT_BUFFER(br_state, s, return FALSE);
- r = GET_BITS(s);
- s = HUFF_EXTEND(r, s);
- }
-
- /* discard all coefficients */
- if (entropy->dc_needed[blkn]) {
- /* Convert DC difference to actual value, update last_dc_val */
- int ci = cinfo->MCU_membership[blkn];
- s += state.last_dc_val[ci];
- state.last_dc_val[ci] = s;
- }
- for (k = 1; k < DCTSIZE2; k++) {
- HUFF_DECODE(s, br_state, actbl, return FALSE, label3);
-
- r = s >> 4;
- s &= 15;
-
- if (s) {
- k += r;
- CHECK_BIT_BUFFER(br_state, s, return FALSE);
- DROP_BITS(s);
- } else {
- if (r != 15)
- break;
- k += 15;
- }
- }
- }
-
- /* Completed MCU, so update state */
- BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
- ASSIGN_STATE(entropy->saved, state);
- }
-
- /* Account for restart interval (no-op if not using restarts) */
- entropy->restarts_to_go--;
-
- return TRUE;
-}
-
-
-/*
- * Module initialization routine for Huffman entropy decoding.
- */
-
-GLOBAL(void)
-jinit_huff_decoder (j_decompress_ptr cinfo)
-{
- huff_entropy_ptr entropy;
- int i;
-
- entropy = (huff_entropy_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(huff_entropy_decoder));
- cinfo->entropy = (struct jpeg_entropy_decoder *) entropy;
- entropy->pub.start_pass = start_pass_huff_decoder;
- entropy->pub.decode_mcu = decode_mcu;
- entropy->pub.decode_mcu_discard_coef = decode_mcu_discard_coef;
- entropy->pub.configure_huffman_decoder = configure_huffman_decoder;
- entropy->pub.get_huffman_decoder_configuration =
- get_huffman_decoder_configuration;
- entropy->pub.index = NULL;
-
- /* Mark tables unallocated */
- for (i = 0; i < NUM_HUFF_TBLS; i++) {
- entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL;
- }
-}
-
-/*
- * Call after jpeg_read_header
- */
-GLOBAL(void)
-jpeg_create_huffman_index(j_decompress_ptr cinfo, huffman_index *index)
-{
- int i, s;
- index->scan_count = 1;
- index->total_iMCU_rows = cinfo->total_iMCU_rows;
- index->scan = (huffman_scan_header*)malloc(index->scan_count
- * sizeof(huffman_scan_header));
- index->scan[0].offset = (huffman_offset_data**)malloc(cinfo->total_iMCU_rows
- * sizeof(huffman_offset_data*));
- index->scan[0].prev_MCU_offset.bitstream_offset = 0;
- index->MCU_sample_size = DEFAULT_MCU_SAMPLE_SIZE;
-
- index->mem_used = sizeof(huffman_scan_header)
- + cinfo->total_iMCU_rows * sizeof(huffman_offset_data*);
-}
-
-GLOBAL(void)
-jpeg_destroy_huffman_index(huffman_index *index)
-{
- int i, j;
- for (i = 0; i < index->scan_count; i++) {
- for(j = 0; j < index->total_iMCU_rows; j++) {
- free(index->scan[i].offset[j]);
- }
- free(index->scan[i].offset);
- }
- free(index->scan);
-}
-
-/*
- * Set the reader byte position to offset
- */
-GLOBAL(void)
-jset_input_stream_position(j_decompress_ptr cinfo, int offset)
-{
- if (cinfo->src->seek_input_data) {
- cinfo->src->seek_input_data(cinfo, offset);
- } else {
- cinfo->src->bytes_in_buffer = cinfo->src->current_offset - offset;
- cinfo->src->next_input_byte = cinfo->src->start_input_byte + offset;
- }
-}
-
-/*
- * Set the reader byte position to offset and bit position to bit_left
- * with bit buffer set to buf.
- */
-GLOBAL(void)
-jset_input_stream_position_bit(j_decompress_ptr cinfo,
- int byte_offset, int bit_left, INT32 buf)
-{
- huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
-
- entropy->bitstate.bits_left = bit_left;
- entropy->bitstate.get_buffer = buf;
-
- jset_input_stream_position(cinfo, byte_offset);
-}
-
-/*
- * Get the current reader byte position.
- */
-GLOBAL(int)
-jget_input_stream_position(j_decompress_ptr cinfo)
-{
- return cinfo->src->current_offset - cinfo->src->bytes_in_buffer;
-}
diff --git a/libjpegtwrp/jdhuff.h b/libjpegtwrp/jdhuff.h
deleted file mode 100644
index 5760a134e..000000000
--- a/libjpegtwrp/jdhuff.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * jdhuff.h
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains declarations for Huffman entropy decoding routines
- * that are shared between the sequential decoder (jdhuff.c) and the
- * progressive decoder (jdphuff.c). No other modules need to see these.
- */
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jpeg_make_d_derived_tbl jMkDDerived
-#define jpeg_fill_bit_buffer jFilBitBuf
-#define jpeg_huff_decode jHufDecode
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-
-/* Derived data constructed for each Huffman table */
-
-#define HUFF_LOOKAHEAD 8 /* # of bits of lookahead */
-
-typedef struct {
- /* Basic tables: (element [0] of each array is unused) */
- INT32 maxcode[18]; /* largest code of length k (-1 if none) */
- /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */
- INT32 valoffset[17]; /* huffval[] offset for codes of length k */
- /* valoffset[k] = huffval[] index of 1st symbol of code length k, less
- * the smallest code of length k; so given a code of length k, the
- * corresponding symbol is huffval[code + valoffset[k]]
- */
-
- /* Link to public Huffman table (needed only in jpeg_huff_decode) */
- JHUFF_TBL *pub;
-
- /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of
- * the input data stream. If the next Huffman code is no more
- * than HUFF_LOOKAHEAD bits long, we can obtain its length and
- * the corresponding symbol directly from these tables.
- */
- int look_nbits[1<<HUFF_LOOKAHEAD]; /* # bits, or 0 if too long */
- UINT8 look_sym[1<<HUFF_LOOKAHEAD]; /* symbol, or unused */
-} d_derived_tbl;
-
-/* Expand a Huffman table definition into the derived format */
-EXTERN(void) jpeg_make_d_derived_tbl
- JPP((j_decompress_ptr cinfo, boolean isDC, int tblno,
- d_derived_tbl ** pdtbl));
-
-
-/*
- * Fetching the next N bits from the input stream is a time-critical operation
- * for the Huffman decoders. We implement it with a combination of inline
- * macros and out-of-line subroutines. Note that N (the number of bits
- * demanded at one time) never exceeds 15 for JPEG use.
- *
- * We read source bytes into get_buffer and dole out bits as needed.
- * If get_buffer already contains enough bits, they are fetched in-line
- * by the macros CHECK_BIT_BUFFER and GET_BITS. When there aren't enough
- * bits, jpeg_fill_bit_buffer is called; it will attempt to fill get_buffer
- * as full as possible (not just to the number of bits needed; this
- * prefetching reduces the overhead cost of calling jpeg_fill_bit_buffer).
- * Note that jpeg_fill_bit_buffer may return FALSE to indicate suspension.
- * On TRUE return, jpeg_fill_bit_buffer guarantees that get_buffer contains
- * at least the requested number of bits --- dummy zeroes are inserted if
- * necessary.
- */
-
-typedef INT32 bit_buf_type; /* type of bit-extraction buffer */
-#define BIT_BUF_SIZE 32 /* size of buffer in bits */
-#define LOG_TWO_BIT_BUF_SIZE 5 /* log_2(BIT_BUF_SIZE) */
-
-/* If long is > 32 bits on your machine, and shifting/masking longs is
- * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE
- * appropriately should be a win. Unfortunately we can't define the size
- * with something like #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8)
- * because not all machines measure sizeof in 8-bit bytes.
- */
-
-typedef struct { /* Bitreading state saved across MCUs */
- bit_buf_type get_buffer; /* current bit-extraction buffer */
- int bits_left; /* # of unused bits in it */
-} bitread_perm_state;
-
-typedef struct { /* Bitreading working state within an MCU */
- /* Current data source location */
- /* We need a copy, rather than munging the original, in case of suspension */
- const JOCTET * next_input_byte; /* => next byte to read from source */
- size_t bytes_in_buffer; /* # of bytes remaining in source buffer */
- /* Bit input buffer --- note these values are kept in register variables,
- * not in this struct, inside the inner loops.
- */
- bit_buf_type get_buffer; /* current bit-extraction buffer */
- int bits_left; /* # of unused bits in it */
- /* Pointer needed by jpeg_fill_bit_buffer. */
- j_decompress_ptr cinfo; /* back link to decompress master record */
-} bitread_working_state;
-
-/* Macros to declare and load/save bitread local variables. */
-#define BITREAD_STATE_VARS \
- register bit_buf_type get_buffer; \
- register int bits_left; \
- bitread_working_state br_state
-
-#define BITREAD_LOAD_STATE(cinfop,permstate) \
- br_state.cinfo = cinfop; \
- br_state.next_input_byte = cinfop->src->next_input_byte; \
- br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \
- get_buffer = permstate.get_buffer; \
- bits_left = permstate.bits_left;
-
-#define BITREAD_SAVE_STATE(cinfop,permstate) \
- cinfop->src->next_input_byte = br_state.next_input_byte; \
- cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \
- permstate.get_buffer = get_buffer; \
- permstate.bits_left = bits_left
-
-/*
- * These macros provide the in-line portion of bit fetching.
- * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer
- * before using GET_BITS, PEEK_BITS, or DROP_BITS.
- * The variables get_buffer and bits_left are assumed to be locals,
- * but the state struct might not be (jpeg_huff_decode needs this).
- * CHECK_BIT_BUFFER(state,n,action);
- * Ensure there are N bits in get_buffer; if suspend, take action.
- * val = GET_BITS(n);
- * Fetch next N bits.
- * val = PEEK_BITS(n);
- * Fetch next N bits without removing them from the buffer.
- * DROP_BITS(n);
- * Discard next N bits.
- * The value N should be a simple variable, not an expression, because it
- * is evaluated multiple times.
- */
-
-#define CHECK_BIT_BUFFER(state,nbits,action) \
- { if (bits_left < (nbits)) { \
- if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits)) \
- { action; } \
- get_buffer = (state).get_buffer; bits_left = (state).bits_left; } }
-
-#define GET_BITS(nbits) \
- (((int) (get_buffer >> (bits_left -= (nbits)))) & ((1<<(nbits))-1))
-
-#define PEEK_BITS(nbits) \
- (((int) (get_buffer >> (bits_left - (nbits)))) & ((1<<(nbits))-1))
-
-#define DROP_BITS(nbits) \
- (bits_left -= (nbits))
-
-/* Load up the bit buffer to a depth of at least nbits */
-EXTERN(boolean) jpeg_fill_bit_buffer
- JPP((bitread_working_state * state, register bit_buf_type get_buffer,
- register int bits_left, int nbits));
-
-
-/*
- * Code for extracting next Huffman-coded symbol from input bit stream.
- * Again, this is time-critical and we make the main paths be macros.
- *
- * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits
- * without looping. Usually, more than 95% of the Huffman codes will be 8
- * or fewer bits long. The few overlength codes are handled with a loop,
- * which need not be inline code.
- *
- * Notes about the HUFF_DECODE macro:
- * 1. Near the end of the data segment, we may fail to get enough bits
- * for a lookahead. In that case, we do it the hard way.
- * 2. If the lookahead table contains no entry, the next code must be
- * more than HUFF_LOOKAHEAD bits long.
- * 3. jpeg_huff_decode returns -1 if forced to suspend.
- */
-
-#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \
-{ register int nb, look; \
- if (bits_left < HUFF_LOOKAHEAD) { \
- if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \
- get_buffer = state.get_buffer; bits_left = state.bits_left; \
- if (bits_left < HUFF_LOOKAHEAD) { \
- nb = 1; goto slowlabel; \
- } \
- } \
- look = PEEK_BITS(HUFF_LOOKAHEAD); \
- if ((nb = htbl->look_nbits[look]) != 0) { \
- DROP_BITS(nb); \
- result = htbl->look_sym[look]; \
- } else { \
- nb = HUFF_LOOKAHEAD+1; \
-slowlabel: \
- if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \
- { failaction; } \
- get_buffer = state.get_buffer; bits_left = state.bits_left; \
- } \
-}
-
-/* Out-of-line case for Huffman code fetching */
-EXTERN(int) jpeg_huff_decode
- JPP((bitread_working_state * state, register bit_buf_type get_buffer,
- register int bits_left, d_derived_tbl * htbl, int min_bits));
diff --git a/libjpegtwrp/jdinput.c b/libjpegtwrp/jdinput.c
deleted file mode 100644
index 4261c1a1c..000000000
--- a/libjpegtwrp/jdinput.c
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- * jdinput.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains input control logic for the JPEG decompressor.
- * These routines are concerned with controlling the decompressor's input
- * processing (marker reading and coefficient decoding). The actual input
- * reading is done in jdmarker.c, jdhuff.c, and jdphuff.c.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Private state */
-
-typedef struct {
- struct jpeg_input_controller pub; /* public fields */
-
- boolean inheaders; /* TRUE until first SOS is reached */
-} my_input_controller;
-
-typedef my_input_controller * my_inputctl_ptr;
-
-
-/* Forward declarations */
-METHODDEF(int) consume_markers JPP((j_decompress_ptr cinfo));
-METHODDEF(int) consume_markers_with_huffman_index JPP((j_decompress_ptr cinfo,
- huffman_index *index, int current_scan));
-
-
-/*
- * Routines to calculate various quantities related to the size of the image.
- */
-
-LOCAL(void)
-initial_setup (j_decompress_ptr cinfo)
-/* Called once, when first SOS marker is reached */
-{
- int ci;
- jpeg_component_info *compptr;
-
- /* Make sure image isn't bigger than I can handle */
- if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION ||
- (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION)
- ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
-
- /* For now, precision must match compiled-in value... */
- if (cinfo->data_precision != BITS_IN_JSAMPLE)
- ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
-
- /* Check that number of components won't exceed internal array sizes */
- if (cinfo->num_components > MAX_COMPONENTS)
- ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
- MAX_COMPONENTS);
-
- /* Compute maximum sampling factors; check factor validity */
- cinfo->max_h_samp_factor = 1;
- cinfo->max_v_samp_factor = 1;
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR ||
- compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR)
- ERREXIT(cinfo, JERR_BAD_SAMPLING);
- cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor,
- compptr->h_samp_factor);
- cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor,
- compptr->v_samp_factor);
- }
-
- /* We initialize DCT_scaled_size and min_DCT_scaled_size to DCTSIZE.
- * In the full decompressor, this will be overridden by jdmaster.c;
- * but in the transcoder, jdmaster.c is not used, so we must do it here.
- */
- cinfo->min_DCT_scaled_size = DCTSIZE;
-
- /* Compute dimensions of components */
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- compptr->DCT_scaled_size = DCTSIZE;
- /* Size in DCT blocks */
- compptr->width_in_blocks = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
- (long) (cinfo->max_h_samp_factor * DCTSIZE));
- compptr->height_in_blocks = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
- (long) (cinfo->max_v_samp_factor * DCTSIZE));
- /* downsampled_width and downsampled_height will also be overridden by
- * jdmaster.c if we are doing full decompression. The transcoder library
- * doesn't use these values, but the calling application might.
- */
- /* Size in samples */
- compptr->downsampled_width = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
- (long) cinfo->max_h_samp_factor);
- compptr->downsampled_height = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
- (long) cinfo->max_v_samp_factor);
- /* Mark component needed, until color conversion says otherwise */
- compptr->component_needed = TRUE;
- /* Mark no quantization table yet saved for component */
- compptr->quant_table = NULL;
- }
-
- /* Compute number of fully interleaved MCU rows. */
- cinfo->total_iMCU_rows = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height,
- (long) (cinfo->max_v_samp_factor*DCTSIZE));
-
- /* Decide whether file contains multiple scans */
- if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode)
- cinfo->inputctl->has_multiple_scans = TRUE;
- else
- cinfo->inputctl->has_multiple_scans = FALSE;
- cinfo->original_image_width = cinfo->image_width;
-}
-
-LOCAL(void)
-per_scan_setup (j_decompress_ptr cinfo)
-/* Do computations that are needed before processing a JPEG scan */
-/* cinfo->comps_in_scan and cinfo->cur_comp_info[] were set from SOS marker */
-{
- int ci, mcublks, tmp;
- jpeg_component_info *compptr;
-
- if (cinfo->comps_in_scan == 1) {
-
- /* Noninterleaved (single-component) scan */
- compptr = cinfo->cur_comp_info[0];
-
- /* Overall image size in MCUs */
- cinfo->MCUs_per_row = compptr->width_in_blocks;
- cinfo->MCU_rows_in_scan = compptr->height_in_blocks;
-
- /* For noninterleaved scan, always one block per MCU */
- compptr->MCU_width = 1;
- compptr->MCU_height = 1;
- compptr->MCU_blocks = 1;
- compptr->MCU_sample_width = compptr->DCT_scaled_size;
- compptr->last_col_width = 1;
- /* For noninterleaved scans, it is convenient to define last_row_height
- * as the number of block rows present in the last iMCU row.
- */
- tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
- if (tmp == 0) tmp = compptr->v_samp_factor;
- compptr->last_row_height = tmp;
-
- /* Prepare array describing MCU composition */
- cinfo->blocks_in_MCU = 1;
- cinfo->MCU_membership[0] = 0;
-
- } else {
-
- /* Interleaved (multi-component) scan */
- if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN)
- ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan,
- MAX_COMPS_IN_SCAN);
-
- /* Overall image size in MCUs */
- cinfo->MCUs_per_row = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_width,
- (long) (cinfo->max_h_samp_factor*DCTSIZE));
- cinfo->MCU_rows_in_scan = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height,
- (long) (cinfo->max_v_samp_factor*DCTSIZE));
-
- cinfo->blocks_in_MCU = 0;
-
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- /* Sampling factors give # of blocks of component in each MCU */
- compptr->MCU_width = compptr->h_samp_factor;
- compptr->MCU_height = compptr->v_samp_factor;
- compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
- compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_scaled_size;
- /* Figure number of non-dummy blocks in last MCU column & row */
- tmp = (int) (compptr->width_in_blocks % compptr->MCU_width);
- if (tmp == 0) tmp = compptr->MCU_width;
- compptr->last_col_width = tmp;
-#ifdef ANDROID_TILE_BASED_DECODE
- if (cinfo->tile_decode) {
- tmp = (int) (jdiv_round_up(cinfo->image_width, 8)
- % compptr->MCU_width);
- if (tmp == 0) tmp = compptr->MCU_width;
- compptr->last_col_width = tmp;
- }
-#endif
-
- tmp = (int) (compptr->height_in_blocks % compptr->MCU_height);
- if (tmp == 0) tmp = compptr->MCU_height;
- compptr->last_row_height = tmp;
- /* Prepare array describing MCU composition */
- mcublks = compptr->MCU_blocks;
- if (cinfo->blocks_in_MCU + mcublks > D_MAX_BLOCKS_IN_MCU)
- ERREXIT(cinfo, JERR_BAD_MCU_SIZE);
- while (mcublks-- > 0) {
- cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci;
- }
- }
-
- }
-}
-
-GLOBAL(void)
-jpeg_decompress_per_scan_setup(j_decompress_ptr cinfo)
-{
- per_scan_setup(cinfo);
-}
-
-
-
-/*
- * Save away a copy of the Q-table referenced by each component present
- * in the current scan, unless already saved during a prior scan.
- *
- * In a multiple-scan JPEG file, the encoder could assign different components
- * the same Q-table slot number, but change table definitions between scans
- * so that each component uses a different Q-table. (The IJG encoder is not
- * currently capable of doing this, but other encoders might.) Since we want
- * to be able to dequantize all the components at the end of the file, this
- * means that we have to save away the table actually used for each component.
- * We do this by copying the table at the start of the first scan containing
- * the component.
- * The JPEG spec prohibits the encoder from changing the contents of a Q-table
- * slot between scans of a component using that slot. If the encoder does so
- * anyway, this decoder will simply use the Q-table values that were current
- * at the start of the first scan for the component.
- *
- * The decompressor output side looks only at the saved quant tables,
- * not at the current Q-table slots.
- */
-
-LOCAL(void)
-latch_quant_tables (j_decompress_ptr cinfo)
-{
- int ci, qtblno;
- jpeg_component_info *compptr;
- JQUANT_TBL * qtbl;
-
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- /* No work if we already saved Q-table for this component */
- if (compptr->quant_table != NULL)
- continue;
- /* Make sure specified quantization table is present */
- qtblno = compptr->quant_tbl_no;
- if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS ||
- cinfo->quant_tbl_ptrs[qtblno] == NULL)
- ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno);
- /* OK, save away the quantization table */
- qtbl = (JQUANT_TBL *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(JQUANT_TBL));
- MEMCOPY(qtbl, cinfo->quant_tbl_ptrs[qtblno], SIZEOF(JQUANT_TBL));
- compptr->quant_table = qtbl;
- }
-}
-
-
-/*
- * Initialize the input modules to read a scan of compressed data.
- * The first call to this is done by jdmaster.c after initializing
- * the entire decompressor (during jpeg_start_decompress).
- * Subsequent calls come from consume_markers, below.
- */
-
-METHODDEF(void)
-start_input_pass (j_decompress_ptr cinfo)
-{
- per_scan_setup(cinfo);
- latch_quant_tables(cinfo);
- (*cinfo->entropy->start_pass) (cinfo);
- (*cinfo->coef->start_input_pass) (cinfo);
- cinfo->inputctl->consume_input = cinfo->coef->consume_data;
- cinfo->inputctl->consume_input_build_huffman_index =
- cinfo->coef->consume_data_build_huffman_index;
-}
-
-
-/*
- * Finish up after inputting a compressed-data scan.
- * This is called by the coefficient controller after it's read all
- * the expected data of the scan.
- */
-
-METHODDEF(void)
-finish_input_pass (j_decompress_ptr cinfo)
-{
- cinfo->inputctl->consume_input = consume_markers;
- cinfo->inputctl->consume_input_build_huffman_index =
- consume_markers_with_huffman_index;
-}
-
-
-METHODDEF(int)
-consume_markers_with_huffman_index (j_decompress_ptr cinfo,
- huffman_index *index, int current_scan)
-{
- return consume_markers(cinfo);
-}
-/*
- * Read JPEG markers before, between, or after compressed-data scans.
- * Change state as necessary when a new scan is reached.
- * Return value is JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
- *
- * The consume_input method pointer points either here or to the
- * coefficient controller's consume_data routine, depending on whether
- * we are reading a compressed data segment or inter-segment markers.
- */
-
-METHODDEF(int)
-consume_markers (j_decompress_ptr cinfo)
-{
- my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl;
- int val;
-
- if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */
- return JPEG_REACHED_EOI;
-
- val = (*cinfo->marker->read_markers) (cinfo);
-
- switch (val) {
- case JPEG_REACHED_SOS: /* Found SOS */
- if (inputctl->inheaders) { /* 1st SOS */
- initial_setup(cinfo);
- inputctl->inheaders = FALSE;
- /* Note: start_input_pass must be called by jdmaster.c
- * before any more input can be consumed. jdapimin.c is
- * responsible for enforcing this sequencing.
- */
- } else { /* 2nd or later SOS marker */
- if (! inputctl->pub.has_multiple_scans)
- ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */
- start_input_pass(cinfo);
- }
- break;
- case JPEG_REACHED_EOI: /* Found EOI */
- inputctl->pub.eoi_reached = TRUE;
- if (inputctl->inheaders) { /* Tables-only datastream, apparently */
- if (cinfo->marker->saw_SOF)
- ERREXIT(cinfo, JERR_SOF_NO_SOS);
- } else {
- /* Prevent infinite loop in coef ctlr's decompress_data routine
- * if user set output_scan_number larger than number of scans.
- */
- if (cinfo->output_scan_number > cinfo->input_scan_number)
- cinfo->output_scan_number = cinfo->input_scan_number;
- }
- break;
- case JPEG_SUSPENDED:
- break;
- }
-
- return val;
-}
-
-
-/*
- * Reset state to begin a fresh datastream.
- */
-
-METHODDEF(void)
-reset_input_controller (j_decompress_ptr cinfo)
-{
- my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl;
-
- inputctl->pub.consume_input = consume_markers;
- inputctl->pub.consume_input_build_huffman_index =
- consume_markers_with_huffman_index;
- inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */
- inputctl->pub.eoi_reached = FALSE;
- inputctl->inheaders = TRUE;
- /* Reset other modules */
- (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
- (*cinfo->marker->reset_marker_reader) (cinfo);
- /* Reset progression state -- would be cleaner if entropy decoder did this */
- cinfo->coef_bits = NULL;
-}
-
-
-/*
- * Initialize the input controller module.
- * This is called only once, when the decompression object is created.
- */
-
-GLOBAL(void)
-jinit_input_controller (j_decompress_ptr cinfo)
-{
- my_inputctl_ptr inputctl;
-
- /* Create subobject in permanent pool */
- inputctl = (my_inputctl_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
- SIZEOF(my_input_controller));
- cinfo->inputctl = (struct jpeg_input_controller *) inputctl;
- /* Initialize method pointers */
- inputctl->pub.consume_input = consume_markers;
- inputctl->pub.reset_input_controller = reset_input_controller;
- inputctl->pub.start_input_pass = start_input_pass;
- inputctl->pub.finish_input_pass = finish_input_pass;
-
- inputctl->pub.consume_markers = consume_markers_with_huffman_index;
- inputctl->pub.consume_input_build_huffman_index =
- consume_markers_with_huffman_index;
- /* Initialize state: can't use reset_input_controller since we don't
- * want to try to reset other modules yet.
- */
- inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */
- inputctl->pub.eoi_reached = FALSE;
- inputctl->inheaders = TRUE;
-}
diff --git a/libjpegtwrp/jdmainct.c b/libjpegtwrp/jdmainct.c
deleted file mode 100644
index c27217e55..000000000
--- a/libjpegtwrp/jdmainct.c
+++ /dev/null
@@ -1,512 +0,0 @@
-/*
- * jdmainct.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains the main buffer controller for decompression.
- * The main buffer lies between the JPEG decompressor proper and the
- * post-processor; it holds downsampled data in the JPEG colorspace.
- *
- * Note that this code is bypassed in raw-data mode, since the application
- * supplies the equivalent of the main buffer in that case.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * In the current system design, the main buffer need never be a full-image
- * buffer; any full-height buffers will be found inside the coefficient or
- * postprocessing controllers. Nonetheless, the main controller is not
- * trivial. Its responsibility is to provide context rows for upsampling/
- * rescaling, and doing this in an efficient fashion is a bit tricky.
- *
- * Postprocessor input data is counted in "row groups". A row group
- * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size)
- * sample rows of each component. (We require DCT_scaled_size values to be
- * chosen such that these numbers are integers. In practice DCT_scaled_size
- * values will likely be powers of two, so we actually have the stronger
- * condition that DCT_scaled_size / min_DCT_scaled_size is an integer.)
- * Upsampling will typically produce max_v_samp_factor pixel rows from each
- * row group (times any additional scale factor that the upsampler is
- * applying).
- *
- * The coefficient controller will deliver data to us one iMCU row at a time;
- * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or
- * exactly min_DCT_scaled_size row groups. (This amount of data corresponds
- * to one row of MCUs when the image is fully interleaved.) Note that the
- * number of sample rows varies across components, but the number of row
- * groups does not. Some garbage sample rows may be included in the last iMCU
- * row at the bottom of the image.
- *
- * Depending on the vertical scaling algorithm used, the upsampler may need
- * access to the sample row(s) above and below its current input row group.
- * The upsampler is required to set need_context_rows TRUE at global selection
- * time if so. When need_context_rows is FALSE, this controller can simply
- * obtain one iMCU row at a time from the coefficient controller and dole it
- * out as row groups to the postprocessor.
- *
- * When need_context_rows is TRUE, this controller guarantees that the buffer
- * passed to postprocessing contains at least one row group's worth of samples
- * above and below the row group(s) being processed. Note that the context
- * rows "above" the first passed row group appear at negative row offsets in
- * the passed buffer. At the top and bottom of the image, the required
- * context rows are manufactured by duplicating the first or last real sample
- * row; this avoids having special cases in the upsampling inner loops.
- *
- * The amount of context is fixed at one row group just because that's a
- * convenient number for this controller to work with. The existing
- * upsamplers really only need one sample row of context. An upsampler
- * supporting arbitrary output rescaling might wish for more than one row
- * group of context when shrinking the image; tough, we don't handle that.
- * (This is justified by the assumption that downsizing will be handled mostly
- * by adjusting the DCT_scaled_size values, so that the actual scale factor at
- * the upsample step needn't be much less than one.)
- *
- * To provide the desired context, we have to retain the last two row groups
- * of one iMCU row while reading in the next iMCU row. (The last row group
- * can't be processed until we have another row group for its below-context,
- * and so we have to save the next-to-last group too for its above-context.)
- * We could do this most simply by copying data around in our buffer, but
- * that'd be very slow. We can avoid copying any data by creating a rather
- * strange pointer structure. Here's how it works. We allocate a workspace
- * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number
- * of row groups per iMCU row). We create two sets of redundant pointers to
- * the workspace. Labeling the physical row groups 0 to M+1, the synthesized
- * pointer lists look like this:
- * M+1 M-1
- * master pointer --> 0 master pointer --> 0
- * 1 1
- * ... ...
- * M-3 M-3
- * M-2 M
- * M-1 M+1
- * M M-2
- * M+1 M-1
- * 0 0
- * We read alternate iMCU rows using each master pointer; thus the last two
- * row groups of the previous iMCU row remain un-overwritten in the workspace.
- * The pointer lists are set up so that the required context rows appear to
- * be adjacent to the proper places when we pass the pointer lists to the
- * upsampler.
- *
- * The above pictures describe the normal state of the pointer lists.
- * At top and bottom of the image, we diddle the pointer lists to duplicate
- * the first or last sample row as necessary (this is cheaper than copying
- * sample rows around).
- *
- * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1. In that
- * situation each iMCU row provides only one row group so the buffering logic
- * must be different (eg, we must read two iMCU rows before we can emit the
- * first row group). For now, we simply do not support providing context
- * rows when min_DCT_scaled_size is 1. That combination seems unlikely to
- * be worth providing --- if someone wants a 1/8th-size preview, they probably
- * want it quick and dirty, so a context-free upsampler is sufficient.
- */
-
-
-/* Private buffer controller object */
-
-typedef struct {
- struct jpeg_d_main_controller pub; /* public fields */
-
- /* Pointer to allocated workspace (M or M+2 row groups). */
- JSAMPARRAY buffer[MAX_COMPONENTS];
-
- boolean buffer_full; /* Have we gotten an iMCU row from decoder? */
- JDIMENSION rowgroup_ctr; /* counts row groups output to postprocessor */
-
- /* Remaining fields are only used in the context case. */
-
- /* These are the master pointers to the funny-order pointer lists. */
- JSAMPIMAGE xbuffer[2]; /* pointers to weird pointer lists */
-
- int whichptr; /* indicates which pointer set is now in use */
- int context_state; /* process_data state machine status */
- JDIMENSION rowgroups_avail; /* row groups available to postprocessor */
- JDIMENSION iMCU_row_ctr; /* counts iMCU rows to detect image top/bot */
-} my_main_controller;
-
-typedef my_main_controller * my_main_ptr;
-
-/* context_state values: */
-#define CTX_PREPARE_FOR_IMCU 0 /* need to prepare for MCU row */
-#define CTX_PROCESS_IMCU 1 /* feeding iMCU to postprocessor */
-#define CTX_POSTPONED_ROW 2 /* feeding postponed row group */
-
-
-/* Forward declarations */
-METHODDEF(void) process_data_simple_main
- JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,
- JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));
-METHODDEF(void) process_data_context_main
- JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,
- JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));
-#ifdef QUANT_2PASS_SUPPORTED
-METHODDEF(void) process_data_crank_post
- JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,
- JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));
-#endif
-
-
-LOCAL(void)
-alloc_funny_pointers (j_decompress_ptr cinfo)
-/* Allocate space for the funny pointer lists.
- * This is done only once, not once per pass.
- */
-{
- my_main_ptr main_ptr = (my_main_ptr) cinfo->main;
- int ci, rgroup;
- int M = cinfo->min_DCT_scaled_size;
- jpeg_component_info *compptr;
- JSAMPARRAY xbuf;
-
- /* Get top-level space for component array pointers.
- * We alloc both arrays with one call to save a few cycles.
- */
- main_ptr->xbuffer[0] = (JSAMPIMAGE)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- cinfo->num_components * 2 * SIZEOF(JSAMPARRAY));
- main_ptr->xbuffer[1] = main_ptr->xbuffer[0] + cinfo->num_components;
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
- cinfo->min_DCT_scaled_size; /* height of a row group of component */
- /* Get space for pointer lists --- M+4 row groups in each list.
- * We alloc both pointer lists with one call to save a few cycles.
- */
- xbuf = (JSAMPARRAY)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- 2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW));
- xbuf += rgroup; /* want one row group at negative offsets */
- main_ptr->xbuffer[0][ci] = xbuf;
- xbuf += rgroup * (M + 4);
- main_ptr->xbuffer[1][ci] = xbuf;
- }
-}
-
-
-LOCAL(void)
-make_funny_pointers (j_decompress_ptr cinfo)
-/* Create the funny pointer lists discussed in the comments above.
- * The actual workspace is already allocated (in main->buffer),
- * and the space for the pointer lists is allocated too.
- * This routine just fills in the curiously ordered lists.
- * This will be repeated at the beginning of each pass.
- */
-{
- my_main_ptr main_ptr = (my_main_ptr) cinfo->main;
- int ci, i, rgroup;
- int M = cinfo->min_DCT_scaled_size;
- jpeg_component_info *compptr;
- JSAMPARRAY buf, xbuf0, xbuf1;
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
- cinfo->min_DCT_scaled_size; /* height of a row group of component */
- xbuf0 = main_ptr->xbuffer[0][ci];
- xbuf1 = main_ptr->xbuffer[1][ci];
- /* First copy the workspace pointers as-is */
- buf = main_ptr->buffer[ci];
- for (i = 0; i < rgroup * (M + 2); i++) {
- xbuf0[i] = xbuf1[i] = buf[i];
- }
- /* In the second list, put the last four row groups in swapped order */
- for (i = 0; i < rgroup * 2; i++) {
- xbuf1[rgroup*(M-2) + i] = buf[rgroup*M + i];
- xbuf1[rgroup*M + i] = buf[rgroup*(M-2) + i];
- }
- /* The wraparound pointers at top and bottom will be filled later
- * (see set_wraparound_pointers, below). Initially we want the "above"
- * pointers to duplicate the first actual data line. This only needs
- * to happen in xbuffer[0].
- */
- for (i = 0; i < rgroup; i++) {
- xbuf0[i - rgroup] = xbuf0[0];
- }
- }
-}
-
-
-LOCAL(void)
-set_wraparound_pointers (j_decompress_ptr cinfo)
-/* Set up the "wraparound" pointers at top and bottom of the pointer lists.
- * This changes the pointer list state from top-of-image to the normal state.
- */
-{
- my_main_ptr main_ptr = (my_main_ptr) cinfo->main;
- int ci, i, rgroup;
- int M = cinfo->min_DCT_scaled_size;
- jpeg_component_info *compptr;
- JSAMPARRAY xbuf0, xbuf1;
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
- cinfo->min_DCT_scaled_size; /* height of a row group of component */
- xbuf0 = main_ptr->xbuffer[0][ci];
- xbuf1 = main_ptr->xbuffer[1][ci];
- for (i = 0; i < rgroup; i++) {
- xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i];
- xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i];
- xbuf0[rgroup*(M+2) + i] = xbuf0[i];
- xbuf1[rgroup*(M+2) + i] = xbuf1[i];
- }
- }
-}
-
-
-LOCAL(void)
-set_bottom_pointers (j_decompress_ptr cinfo)
-/* Change the pointer lists to duplicate the last sample row at the bottom
- * of the image. whichptr indicates which xbuffer holds the final iMCU row.
- * Also sets rowgroups_avail to indicate number of nondummy row groups in row.
- */
-{
- my_main_ptr main_ptr = (my_main_ptr) cinfo->main;
- int ci, i, rgroup, iMCUheight, rows_left;
- jpeg_component_info *compptr;
- JSAMPARRAY xbuf;
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- /* Count sample rows in one iMCU row and in one row group */
- iMCUheight = compptr->v_samp_factor * compptr->DCT_scaled_size;
- rgroup = iMCUheight / cinfo->min_DCT_scaled_size;
- /* Count nondummy sample rows remaining for this component */
- rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight);
- if (rows_left == 0) rows_left = iMCUheight;
- /* Count nondummy row groups. Should get same answer for each component,
- * so we need only do it once.
- */
- if (ci == 0) {
- main_ptr->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1);
- }
- /* Duplicate the last real sample row rgroup*2 times; this pads out the
- * last partial rowgroup and ensures at least one full rowgroup of context.
- */
- xbuf = main_ptr->xbuffer[main_ptr->whichptr][ci];
- for (i = 0; i < rgroup * 2; i++) {
- xbuf[rows_left + i] = xbuf[rows_left-1];
- }
- }
-}
-
-
-/*
- * Initialize for a processing pass.
- */
-
-METHODDEF(void)
-start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)
-{
- my_main_ptr main_ptr = (my_main_ptr) cinfo->main;
-
- switch (pass_mode) {
- case JBUF_PASS_THRU:
- if (cinfo->upsample->need_context_rows) {
- main_ptr->pub.process_data = process_data_context_main;
- make_funny_pointers(cinfo); /* Create the xbuffer[] lists */
- main_ptr->whichptr = 0; /* Read first iMCU row into xbuffer[0] */
- main_ptr->context_state = CTX_PREPARE_FOR_IMCU;
- main_ptr->iMCU_row_ctr = 0;
- } else {
- /* Simple case with no context needed */
- main_ptr->pub.process_data = process_data_simple_main;
- }
- main_ptr->buffer_full = FALSE; /* Mark buffer empty */
- main_ptr->rowgroup_ctr = 0;
- break;
-#ifdef QUANT_2PASS_SUPPORTED
- case JBUF_CRANK_DEST:
- /* For last pass of 2-pass quantization, just crank the postprocessor */
- main_ptr->pub.process_data = process_data_crank_post;
- break;
-#endif
- default:
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
- break;
- }
-}
-
-
-/*
- * Process some data.
- * This handles the simple case where no context is required.
- */
-
-METHODDEF(void)
-process_data_simple_main (j_decompress_ptr cinfo,
- JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
- JDIMENSION out_rows_avail)
-{
- my_main_ptr main_ptr = (my_main_ptr) cinfo->main;
- JDIMENSION rowgroups_avail;
-
- /* Read input data if we haven't filled the main buffer yet */
- if (! main_ptr->buffer_full) {
- if (! (*cinfo->coef->decompress_data) (cinfo, main_ptr->buffer))
- return; /* suspension forced, can do nothing more */
- main_ptr->buffer_full = TRUE; /* OK, we have an iMCU row to work with */
- }
-
- /* There are always min_DCT_scaled_size row groups in an iMCU row. */
- rowgroups_avail = (JDIMENSION) cinfo->min_DCT_scaled_size;
- /* Note: at the bottom of the image, we may pass extra garbage row groups
- * to the postprocessor. The postprocessor has to check for bottom
- * of image anyway (at row resolution), so no point in us doing it too.
- */
-
- /* Feed the postprocessor */
- (*cinfo->post->post_process_data) (cinfo, main_ptr->buffer,
- &main_ptr->rowgroup_ctr, rowgroups_avail,
- output_buf, out_row_ctr, out_rows_avail);
-
- /* Has postprocessor consumed all the data yet? If so, mark buffer empty */
- if (main_ptr->rowgroup_ctr >= rowgroups_avail) {
- main_ptr->buffer_full = FALSE;
- main_ptr->rowgroup_ctr = 0;
- }
-}
-
-
-/*
- * Process some data.
- * This handles the case where context rows must be provided.
- */
-
-METHODDEF(void)
-process_data_context_main (j_decompress_ptr cinfo,
- JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
- JDIMENSION out_rows_avail)
-{
- my_main_ptr main_ptr = (my_main_ptr) cinfo->main;
-
- /* Read input data if we haven't filled the main buffer yet */
- if (! main_ptr->buffer_full) {
- if (! (*cinfo->coef->decompress_data) (cinfo,
- main_ptr->xbuffer[main_ptr->whichptr]))
- return; /* suspension forced, can do nothing more */
- main_ptr->buffer_full = TRUE; /* OK, we have an iMCU row to work with */
- main_ptr->iMCU_row_ctr++; /* count rows received */
- }
-
- /* Postprocessor typically will not swallow all the input data it is handed
- * in one call (due to filling the output buffer first). Must be prepared
- * to exit and restart. This switch lets us keep track of how far we got.
- * Note that each case falls through to the next on successful completion.
- */
- switch (main_ptr->context_state) {
- case CTX_POSTPONED_ROW:
- /* Call postprocessor using previously set pointers for postponed row */
- (*cinfo->post->post_process_data) (cinfo, main_ptr->xbuffer[main_ptr->whichptr],
- &main_ptr->rowgroup_ctr, main_ptr->rowgroups_avail,
- output_buf, out_row_ctr, out_rows_avail);
- if (main_ptr->rowgroup_ctr < main_ptr->rowgroups_avail)
- return; /* Need to suspend */
- main_ptr->context_state = CTX_PREPARE_FOR_IMCU;
- if (*out_row_ctr >= out_rows_avail)
- return; /* Postprocessor exactly filled output buf */
- /*FALLTHROUGH*/
- case CTX_PREPARE_FOR_IMCU:
- /* Prepare to process first M-1 row groups of this iMCU row */
- main_ptr->rowgroup_ctr = 0;
- main_ptr->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size - 1);
- /* Check for bottom of image: if so, tweak pointers to "duplicate"
- * the last sample row, and adjust rowgroups_avail to ignore padding rows.
- */
- if (main_ptr->iMCU_row_ctr == cinfo->total_iMCU_rows)
- set_bottom_pointers(cinfo);
- main_ptr->context_state = CTX_PROCESS_IMCU;
- /*FALLTHROUGH*/
- case CTX_PROCESS_IMCU:
- /* Call postprocessor using previously set pointers */
- (*cinfo->post->post_process_data) (cinfo, main_ptr->xbuffer[main_ptr->whichptr],
- &main_ptr->rowgroup_ctr, main_ptr->rowgroups_avail,
- output_buf, out_row_ctr, out_rows_avail);
- if (main_ptr->rowgroup_ctr < main_ptr->rowgroups_avail)
- return; /* Need to suspend */
- /* After the first iMCU, change wraparound pointers to normal state */
- if (main_ptr->iMCU_row_ctr == 1)
- set_wraparound_pointers(cinfo);
- /* Prepare to load new iMCU row using other xbuffer list */
- main_ptr->whichptr ^= 1; /* 0=>1 or 1=>0 */
- main_ptr->buffer_full = FALSE;
- /* Still need to process last row group of this iMCU row, */
- /* which is saved at index M+1 of the other xbuffer */
- main_ptr->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_scaled_size + 1);
- main_ptr->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size + 2);
- main_ptr->context_state = CTX_POSTPONED_ROW;
- }
-}
-
-
-/*
- * Process some data.
- * Final pass of two-pass quantization: just call the postprocessor.
- * Source data will be the postprocessor controller's internal buffer.
- */
-
-#ifdef QUANT_2PASS_SUPPORTED
-
-METHODDEF(void)
-process_data_crank_post (j_decompress_ptr cinfo,
- JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
- JDIMENSION out_rows_avail)
-{
- (*cinfo->post->post_process_data) (cinfo, (JSAMPIMAGE) NULL,
- (JDIMENSION *) NULL, (JDIMENSION) 0,
- output_buf, out_row_ctr, out_rows_avail);
-}
-
-#endif /* QUANT_2PASS_SUPPORTED */
-
-
-/*
- * Initialize main buffer controller.
- */
-
-GLOBAL(void)
-jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
-{
- my_main_ptr main_ptr;
- int ci, rgroup, ngroups;
- jpeg_component_info *compptr;
-
- main_ptr = (my_main_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_main_controller));
- cinfo->main = (struct jpeg_d_main_controller *) main_ptr;
- main_ptr->pub.start_pass = start_pass_main;
-
- if (need_full_buffer) /* shouldn't happen */
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-
- /* Allocate the workspace.
- * ngroups is the number of row groups we need.
- */
- if (cinfo->upsample->need_context_rows) {
- if (cinfo->min_DCT_scaled_size < 2) /* unsupported, see comments above */
- ERREXIT(cinfo, JERR_NOTIMPL);
- alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */
- ngroups = cinfo->min_DCT_scaled_size + 2;
- } else {
- ngroups = cinfo->min_DCT_scaled_size;
- }
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
- cinfo->min_DCT_scaled_size; /* height of a row group of component */
- main_ptr->buffer[ci] = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- compptr->width_in_blocks * compptr->DCT_scaled_size,
- (JDIMENSION) (rgroup * ngroups));
- }
-}
diff --git a/libjpegtwrp/jdmarker.c b/libjpegtwrp/jdmarker.c
deleted file mode 100644
index 733294050..000000000
--- a/libjpegtwrp/jdmarker.c
+++ /dev/null
@@ -1,1397 +0,0 @@
-/*
- * jdmarker.c
- *
- * Copyright (C) 1991-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to decode JPEG datastream markers.
- * Most of the complexity arises from our desire to support input
- * suspension: if not all of the data for a marker is available,
- * we must exit back to the application. On resumption, we reprocess
- * the marker.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-typedef enum { /* JPEG marker codes */
- M_SOF0 = 0xc0,
- M_SOF1 = 0xc1,
- M_SOF2 = 0xc2,
- M_SOF3 = 0xc3,
-
- M_SOF5 = 0xc5,
- M_SOF6 = 0xc6,
- M_SOF7 = 0xc7,
-
- M_JPG = 0xc8,
- M_SOF9 = 0xc9,
- M_SOF10 = 0xca,
- M_SOF11 = 0xcb,
-
- M_SOF13 = 0xcd,
- M_SOF14 = 0xce,
- M_SOF15 = 0xcf,
-
- M_DHT = 0xc4,
-
- M_DAC = 0xcc,
-
- M_RST0 = 0xd0,
- M_RST1 = 0xd1,
- M_RST2 = 0xd2,
- M_RST3 = 0xd3,
- M_RST4 = 0xd4,
- M_RST5 = 0xd5,
- M_RST6 = 0xd6,
- M_RST7 = 0xd7,
-
- M_SOI = 0xd8,
- M_EOI = 0xd9,
- M_SOS = 0xda,
- M_DQT = 0xdb,
- M_DNL = 0xdc,
- M_DRI = 0xdd,
- M_DHP = 0xde,
- M_EXP = 0xdf,
-
- M_APP0 = 0xe0,
- M_APP1 = 0xe1,
- M_APP2 = 0xe2,
- M_APP3 = 0xe3,
- M_APP4 = 0xe4,
- M_APP5 = 0xe5,
- M_APP6 = 0xe6,
- M_APP7 = 0xe7,
- M_APP8 = 0xe8,
- M_APP9 = 0xe9,
- M_APP10 = 0xea,
- M_APP11 = 0xeb,
- M_APP12 = 0xec,
- M_APP13 = 0xed,
- M_APP14 = 0xee,
- M_APP15 = 0xef,
-
- M_JPG0 = 0xf0,
- M_JPG13 = 0xfd,
- M_COM = 0xfe,
-
- M_TEM = 0x01,
-
- M_ERROR = 0x100
-} JPEG_MARKER;
-
-
-/* Private state */
-
-typedef struct {
- struct jpeg_marker_reader pub; /* public fields */
-
- /* Application-overridable marker processing methods */
- jpeg_marker_parser_method process_COM;
- jpeg_marker_parser_method process_APPn[16];
-
- /* Limit on marker data length to save for each marker type */
- unsigned int length_limit_COM;
- unsigned int length_limit_APPn[16];
-
- /* Status of COM/APPn marker saving */
- jpeg_saved_marker_ptr cur_marker; /* NULL if not processing a marker */
- unsigned int bytes_read; /* data bytes read so far in marker */
- /* Note: cur_marker is not linked into marker_list until it's all read. */
-} my_marker_reader;
-
-typedef my_marker_reader * my_marker_ptr;
-
-
-/*
- * Macros for fetching data from the data source module.
- *
- * At all times, cinfo->src->next_input_byte and ->bytes_in_buffer reflect
- * the current restart point; we update them only when we have reached a
- * suitable place to restart if a suspension occurs.
- */
-
-/* Declare and initialize local copies of input pointer/count */
-#define INPUT_VARS(cinfo) \
- struct jpeg_source_mgr * datasrc = (cinfo)->src; \
- const JOCTET * next_input_byte = datasrc->next_input_byte; \
- size_t bytes_in_buffer = datasrc->bytes_in_buffer
-
-/* Unload the local copies --- do this only at a restart boundary */
-#define INPUT_SYNC(cinfo) \
- ( datasrc->next_input_byte = next_input_byte, \
- datasrc->bytes_in_buffer = bytes_in_buffer )
-
-/* Reload the local copies --- used only in MAKE_BYTE_AVAIL */
-#define INPUT_RELOAD(cinfo) \
- ( next_input_byte = datasrc->next_input_byte, \
- bytes_in_buffer = datasrc->bytes_in_buffer )
-
-/* Internal macro for INPUT_BYTE and INPUT_2BYTES: make a byte available.
- * Note we do *not* do INPUT_SYNC before calling fill_input_buffer,
- * but we must reload the local copies after a successful fill.
- */
-#define MAKE_BYTE_AVAIL(cinfo,action) \
- if (bytes_in_buffer == 0) { \
- if (! (*datasrc->fill_input_buffer) (cinfo)) \
- { action; } \
- INPUT_RELOAD(cinfo); \
- }
-
-/* Read a byte into variable V.
- * If must suspend, take the specified action (typically "return FALSE").
- */
-#define INPUT_BYTE(cinfo,V,action) \
- MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \
- bytes_in_buffer--; \
- V = GETJOCTET(*next_input_byte++); )
-
-/* As above, but read two bytes interpreted as an unsigned 16-bit integer.
- * V should be declared unsigned int or perhaps INT32.
- */
-#define INPUT_2BYTES(cinfo,V,action) \
- MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \
- bytes_in_buffer--; \
- V = ((unsigned int) GETJOCTET(*next_input_byte++)) << 8; \
- MAKE_BYTE_AVAIL(cinfo,action); \
- bytes_in_buffer--; \
- V += GETJOCTET(*next_input_byte++); )
-
-
-/*
- * Routines to process JPEG markers.
- *
- * Entry condition: JPEG marker itself has been read and its code saved
- * in cinfo->unread_marker; input restart point is just after the marker.
- *
- * Exit: if return TRUE, have read and processed any parameters, and have
- * updated the restart point to point after the parameters.
- * If return FALSE, was forced to suspend before reaching end of
- * marker parameters; restart point has not been moved. Same routine
- * will be called again after application supplies more input data.
- *
- * This approach to suspension assumes that all of a marker's parameters
- * can fit into a single input bufferload. This should hold for "normal"
- * markers. Some COM/APPn markers might have large parameter segments
- * that might not fit. If we are simply dropping such a marker, we use
- * skip_input_data to get past it, and thereby put the problem on the
- * source manager's shoulders. If we are saving the marker's contents
- * into memory, we use a slightly different convention: when forced to
- * suspend, the marker processor updates the restart point to the end of
- * what it's consumed (ie, the end of the buffer) before returning FALSE.
- * On resumption, cinfo->unread_marker still contains the marker code,
- * but the data source will point to the next chunk of marker data.
- * The marker processor must retain internal state to deal with this.
- *
- * Note that we don't bother to avoid duplicate trace messages if a
- * suspension occurs within marker parameters. Other side effects
- * require more care.
- */
-
-
-LOCAL(boolean)
-get_soi (j_decompress_ptr cinfo)
-/* Process an SOI marker */
-{
- int i;
-
- TRACEMS(cinfo, 1, JTRC_SOI);
-
- if (cinfo->marker->saw_SOI)
- ERREXIT(cinfo, JERR_SOI_DUPLICATE);
-
- /* Reset all parameters that are defined to be reset by SOI */
-
- for (i = 0; i < NUM_ARITH_TBLS; i++) {
- cinfo->arith_dc_L[i] = 0;
- cinfo->arith_dc_U[i] = 1;
- cinfo->arith_ac_K[i] = 5;
- }
- cinfo->restart_interval = 0;
-
- /* Set initial assumptions for colorspace etc */
-
- cinfo->jpeg_color_space = JCS_UNKNOWN;
- cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */
-
- cinfo->saw_JFIF_marker = FALSE;
- cinfo->JFIF_major_version = 1; /* set default JFIF APP0 values */
- cinfo->JFIF_minor_version = 1;
- cinfo->density_unit = 0;
- cinfo->X_density = 1;
- cinfo->Y_density = 1;
- cinfo->saw_Adobe_marker = FALSE;
- cinfo->Adobe_transform = 0;
-
- cinfo->marker->saw_SOI = TRUE;
-
- return TRUE;
-}
-
-
-LOCAL(boolean)
-get_sof (j_decompress_ptr cinfo, boolean is_prog, boolean is_arith)
-/* Process a SOFn marker */
-{
- INT32 length;
- int c, ci;
- jpeg_component_info * compptr;
- INPUT_VARS(cinfo);
-
- cinfo->progressive_mode = is_prog;
- cinfo->arith_code = is_arith;
-
- INPUT_2BYTES(cinfo, length, return FALSE);
-
- INPUT_BYTE(cinfo, cinfo->data_precision, return FALSE);
- INPUT_2BYTES(cinfo, cinfo->image_height, return FALSE);
- INPUT_2BYTES(cinfo, cinfo->image_width, return FALSE);
- INPUT_BYTE(cinfo, cinfo->num_components, return FALSE);
-
- length -= 8;
-
- TRACEMS4(cinfo, 1, JTRC_SOF, cinfo->unread_marker,
- (int) cinfo->image_width, (int) cinfo->image_height,
- cinfo->num_components);
-
- if (cinfo->marker->saw_SOF)
- ERREXIT(cinfo, JERR_SOF_DUPLICATE);
-
- /* We don't support files in which the image height is initially specified */
- /* as 0 and is later redefined by DNL. As long as we have to check that, */
- /* might as well have a general sanity check. */
- if (cinfo->image_height <= 0 || cinfo->image_width <= 0
- || cinfo->num_components <= 0)
- ERREXIT(cinfo, JERR_EMPTY_IMAGE);
-
- if (length != (cinfo->num_components * 3))
- ERREXIT(cinfo, JERR_BAD_LENGTH);
-
- if (cinfo->comp_info == NULL) /* do only once, even if suspend */
- cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- cinfo->num_components * SIZEOF(jpeg_component_info));
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- compptr->component_index = ci;
- INPUT_BYTE(cinfo, compptr->component_id, return FALSE);
- INPUT_BYTE(cinfo, c, return FALSE);
- compptr->h_samp_factor = (c >> 4) & 15;
- compptr->v_samp_factor = (c ) & 15;
- INPUT_BYTE(cinfo, compptr->quant_tbl_no, return FALSE);
-
- TRACEMS4(cinfo, 1, JTRC_SOF_COMPONENT,
- compptr->component_id, compptr->h_samp_factor,
- compptr->v_samp_factor, compptr->quant_tbl_no);
- }
-
- cinfo->marker->saw_SOF = TRUE;
-
- INPUT_SYNC(cinfo);
- return TRUE;
-}
-
-
-LOCAL(boolean)
-get_sos (j_decompress_ptr cinfo)
-/* Process a SOS marker */
-{
- INT32 length;
- int i, ci, n, c, cc;
- jpeg_component_info * compptr;
- INPUT_VARS(cinfo);
-
- if (! cinfo->marker->saw_SOF)
- ERREXIT(cinfo, JERR_SOS_NO_SOF);
-
- INPUT_2BYTES(cinfo, length, return FALSE);
-
- INPUT_BYTE(cinfo, n, return FALSE); /* Number of components */
-
- TRACEMS1(cinfo, 1, JTRC_SOS, n);
-
- if (length != (n * 2 + 6) || n < 1 || n > MAX_COMPS_IN_SCAN)
- ERREXIT(cinfo, JERR_BAD_LENGTH);
-
- cinfo->comps_in_scan = n;
-
- /* Collect the component-spec parameters */
-
- for (i = 0; i < n; i++) {
- INPUT_BYTE(cinfo, cc, return FALSE);
- INPUT_BYTE(cinfo, c, return FALSE);
-
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- if (cc == compptr->component_id)
- goto id_found;
- }
-
- ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc);
-
- id_found:
-
- cinfo->cur_comp_info[i] = compptr;
- compptr->dc_tbl_no = (c >> 4) & 15;
- compptr->ac_tbl_no = (c ) & 15;
-
- TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, cc,
- compptr->dc_tbl_no, compptr->ac_tbl_no);
- }
-
- /* Collect the additional scan parameters Ss, Se, Ah/Al. */
- INPUT_BYTE(cinfo, c, return FALSE);
- cinfo->Ss = c;
- INPUT_BYTE(cinfo, c, return FALSE);
- cinfo->Se = c;
- INPUT_BYTE(cinfo, c, return FALSE);
- cinfo->Ah = (c >> 4) & 15;
- cinfo->Al = (c ) & 15;
-
- TRACEMS4(cinfo, 1, JTRC_SOS_PARAMS, cinfo->Ss, cinfo->Se,
- cinfo->Ah, cinfo->Al);
-
- /* Prepare to scan data & restart markers */
- cinfo->marker->next_restart_num = 0;
-
- /* Count another SOS marker */
- cinfo->input_scan_number++;
-
- INPUT_SYNC(cinfo);
- return TRUE;
-}
-
-
-#ifdef D_ARITH_CODING_SUPPORTED
-
-LOCAL(boolean)
-get_dac (j_decompress_ptr cinfo)
-/* Process a DAC marker */
-{
- INT32 length;
- int index, val;
- INPUT_VARS(cinfo);
-
- INPUT_2BYTES(cinfo, length, return FALSE);
- length -= 2;
-
- while (length > 0) {
- INPUT_BYTE(cinfo, index, return FALSE);
- INPUT_BYTE(cinfo, val, return FALSE);
-
- length -= 2;
-
- TRACEMS2(cinfo, 1, JTRC_DAC, index, val);
-
- if (index < 0 || index >= (2*NUM_ARITH_TBLS))
- ERREXIT1(cinfo, JERR_DAC_INDEX, index);
-
- if (index >= NUM_ARITH_TBLS) { /* define AC table */
- cinfo->arith_ac_K[index-NUM_ARITH_TBLS] = (UINT8) val;
- } else { /* define DC table */
- cinfo->arith_dc_L[index] = (UINT8) (val & 0x0F);
- cinfo->arith_dc_U[index] = (UINT8) (val >> 4);
- if (cinfo->arith_dc_L[index] > cinfo->arith_dc_U[index])
- ERREXIT1(cinfo, JERR_DAC_VALUE, val);
- }
- }
-
- if (length != 0)
- ERREXIT(cinfo, JERR_BAD_LENGTH);
-
- INPUT_SYNC(cinfo);
- return TRUE;
-}
-
-#else /* ! D_ARITH_CODING_SUPPORTED */
-
-#define get_dac(cinfo) skip_variable(cinfo)
-
-#endif /* D_ARITH_CODING_SUPPORTED */
-
-
-LOCAL(boolean)
-get_dht (j_decompress_ptr cinfo)
-/* Process a DHT marker */
-{
- INT32 length;
- UINT8 bits[17];
- UINT8 huffval[256];
- int i, index, count;
- JHUFF_TBL **htblptr;
- INPUT_VARS(cinfo);
-
- INPUT_2BYTES(cinfo, length, return FALSE);
- length -= 2;
-
- while (length > 16) {
- INPUT_BYTE(cinfo, index, return FALSE);
-
- TRACEMS1(cinfo, 1, JTRC_DHT, index);
-
- bits[0] = 0;
- count = 0;
- for (i = 1; i <= 16; i++) {
- INPUT_BYTE(cinfo, bits[i], return FALSE);
- count += bits[i];
- }
-
- length -= 1 + 16;
-
- TRACEMS8(cinfo, 2, JTRC_HUFFBITS,
- bits[1], bits[2], bits[3], bits[4],
- bits[5], bits[6], bits[7], bits[8]);
- TRACEMS8(cinfo, 2, JTRC_HUFFBITS,
- bits[9], bits[10], bits[11], bits[12],
- bits[13], bits[14], bits[15], bits[16]);
-
- /* Here we just do minimal validation of the counts to avoid walking
- * off the end of our table space. jdhuff.c will check more carefully.
- */
- if (count > 256 || ((INT32) count) > length)
- ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
-
- for (i = 0; i < count; i++)
- INPUT_BYTE(cinfo, huffval[i], return FALSE);
-
- length -= count;
-
- if (index & 0x10) { /* AC table definition */
- index -= 0x10;
- htblptr = &cinfo->ac_huff_tbl_ptrs[index];
- } else { /* DC table definition */
- htblptr = &cinfo->dc_huff_tbl_ptrs[index];
- }
-
- if (index < 0 || index >= NUM_HUFF_TBLS)
- ERREXIT1(cinfo, JERR_DHT_INDEX, index);
-
- if (*htblptr == NULL)
- *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
-
- MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits));
- MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval));
- }
-
- if (length != 0)
- ERREXIT(cinfo, JERR_BAD_LENGTH);
-
- INPUT_SYNC(cinfo);
- return TRUE;
-}
-
-
-LOCAL(boolean)
-get_dqt (j_decompress_ptr cinfo)
-/* Process a DQT marker */
-{
- INT32 length;
- int n, i, prec;
- unsigned int tmp;
- JQUANT_TBL *quant_ptr;
- INPUT_VARS(cinfo);
-
- INPUT_2BYTES(cinfo, length, return FALSE);
- length -= 2;
-
- while (length > 0) {
- INPUT_BYTE(cinfo, n, return FALSE);
- prec = n >> 4;
- n &= 0x0F;
-
- TRACEMS2(cinfo, 1, JTRC_DQT, n, prec);
-
- if (n >= NUM_QUANT_TBLS)
- ERREXIT1(cinfo, JERR_DQT_INDEX, n);
-
- if (cinfo->quant_tbl_ptrs[n] == NULL)
- cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo);
- quant_ptr = cinfo->quant_tbl_ptrs[n];
-
- for (i = 0; i < DCTSIZE2; i++) {
- if (prec)
- INPUT_2BYTES(cinfo, tmp, return FALSE);
- else
- INPUT_BYTE(cinfo, tmp, return FALSE);
- /* We convert the zigzag-order table to natural array order. */
- quant_ptr->quantval[jpeg_natural_order[i]] = (UINT16) tmp;
- }
-
- if (cinfo->err->trace_level >= 2) {
- for (i = 0; i < DCTSIZE2; i += 8) {
- TRACEMS8(cinfo, 2, JTRC_QUANTVALS,
- quant_ptr->quantval[i], quant_ptr->quantval[i+1],
- quant_ptr->quantval[i+2], quant_ptr->quantval[i+3],
- quant_ptr->quantval[i+4], quant_ptr->quantval[i+5],
- quant_ptr->quantval[i+6], quant_ptr->quantval[i+7]);
- }
- }
-
- length -= DCTSIZE2+1;
- if (prec) length -= DCTSIZE2;
- }
-
- if (length != 0)
- ERREXIT(cinfo, JERR_BAD_LENGTH);
-
- INPUT_SYNC(cinfo);
- return TRUE;
-}
-
-
-LOCAL(boolean)
-get_dri (j_decompress_ptr cinfo)
-/* Process a DRI marker */
-{
- INT32 length;
- unsigned int tmp;
- INPUT_VARS(cinfo);
-
- INPUT_2BYTES(cinfo, length, return FALSE);
-
- if (length != 4)
- ERREXIT(cinfo, JERR_BAD_LENGTH);
-
- INPUT_2BYTES(cinfo, tmp, return FALSE);
-
- TRACEMS1(cinfo, 1, JTRC_DRI, tmp);
-
- cinfo->restart_interval = tmp;
-
- INPUT_SYNC(cinfo);
- return TRUE;
-}
-
-
-/*
- * Routines for processing APPn and COM markers.
- * These are either saved in memory or discarded, per application request.
- * APP0 and APP14 are specially checked to see if they are
- * JFIF and Adobe markers, respectively.
- */
-
-#define APP0_DATA_LEN 14 /* Length of interesting data in APP0 */
-#define APP14_DATA_LEN 12 /* Length of interesting data in APP14 */
-#define APPN_DATA_LEN 14 /* Must be the largest of the above!! */
-
-
-LOCAL(void)
-examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data,
- unsigned int datalen, INT32 remaining)
-/* Examine first few bytes from an APP0.
- * Take appropriate action if it is a JFIF marker.
- * datalen is # of bytes at data[], remaining is length of rest of marker data.
- */
-{
- INT32 totallen = (INT32) datalen + remaining;
-
- if (datalen >= APP0_DATA_LEN &&
- GETJOCTET(data[0]) == 0x4A &&
- GETJOCTET(data[1]) == 0x46 &&
- GETJOCTET(data[2]) == 0x49 &&
- GETJOCTET(data[3]) == 0x46 &&
- GETJOCTET(data[4]) == 0) {
- /* Found JFIF APP0 marker: save info */
- cinfo->saw_JFIF_marker = TRUE;
- cinfo->JFIF_major_version = GETJOCTET(data[5]);
- cinfo->JFIF_minor_version = GETJOCTET(data[6]);
- cinfo->density_unit = GETJOCTET(data[7]);
- cinfo->X_density = (GETJOCTET(data[8]) << 8) + GETJOCTET(data[9]);
- cinfo->Y_density = (GETJOCTET(data[10]) << 8) + GETJOCTET(data[11]);
- /* Check version.
- * Major version must be 1, anything else signals an incompatible change.
- * (We used to treat this as an error, but now it's a nonfatal warning,
- * because some bozo at Hijaak couldn't read the spec.)
- * Minor version should be 0..2, but process anyway if newer.
- */
- if (cinfo->JFIF_major_version != 1)
- WARNMS2(cinfo, JWRN_JFIF_MAJOR,
- cinfo->JFIF_major_version, cinfo->JFIF_minor_version);
- /* Generate trace messages */
- TRACEMS5(cinfo, 1, JTRC_JFIF,
- cinfo->JFIF_major_version, cinfo->JFIF_minor_version,
- cinfo->X_density, cinfo->Y_density, cinfo->density_unit);
- /* Validate thumbnail dimensions and issue appropriate messages */
- if (GETJOCTET(data[12]) | GETJOCTET(data[13]))
- TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL,
- GETJOCTET(data[12]), GETJOCTET(data[13]));
- totallen -= APP0_DATA_LEN;
- if (totallen !=
- ((INT32)GETJOCTET(data[12]) * (INT32)GETJOCTET(data[13]) * (INT32) 3))
- TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) totallen);
- } else if (datalen >= 6 &&
- GETJOCTET(data[0]) == 0x4A &&
- GETJOCTET(data[1]) == 0x46 &&
- GETJOCTET(data[2]) == 0x58 &&
- GETJOCTET(data[3]) == 0x58 &&
- GETJOCTET(data[4]) == 0) {
- /* Found JFIF "JFXX" extension APP0 marker */
- /* The library doesn't actually do anything with these,
- * but we try to produce a helpful trace message.
- */
- switch (GETJOCTET(data[5])) {
- case 0x10:
- TRACEMS1(cinfo, 1, JTRC_THUMB_JPEG, (int) totallen);
- break;
- case 0x11:
- TRACEMS1(cinfo, 1, JTRC_THUMB_PALETTE, (int) totallen);
- break;
- case 0x13:
- TRACEMS1(cinfo, 1, JTRC_THUMB_RGB, (int) totallen);
- break;
- default:
- TRACEMS2(cinfo, 1, JTRC_JFIF_EXTENSION,
- GETJOCTET(data[5]), (int) totallen);
- break;
- }
- } else {
- /* Start of APP0 does not match "JFIF" or "JFXX", or too short */
- TRACEMS1(cinfo, 1, JTRC_APP0, (int) totallen);
- }
-}
-
-
-LOCAL(void)
-examine_app14 (j_decompress_ptr cinfo, JOCTET FAR * data,
- unsigned int datalen, INT32 remaining)
-/* Examine first few bytes from an APP14.
- * Take appropriate action if it is an Adobe marker.
- * datalen is # of bytes at data[], remaining is length of rest of marker data.
- */
-{
- unsigned int version, flags0, flags1, transform;
-
- if (datalen >= APP14_DATA_LEN &&
- GETJOCTET(data[0]) == 0x41 &&
- GETJOCTET(data[1]) == 0x64 &&
- GETJOCTET(data[2]) == 0x6F &&
- GETJOCTET(data[3]) == 0x62 &&
- GETJOCTET(data[4]) == 0x65) {
- /* Found Adobe APP14 marker */
- version = (GETJOCTET(data[5]) << 8) + GETJOCTET(data[6]);
- flags0 = (GETJOCTET(data[7]) << 8) + GETJOCTET(data[8]);
- flags1 = (GETJOCTET(data[9]) << 8) + GETJOCTET(data[10]);
- transform = GETJOCTET(data[11]);
- TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform);
- cinfo->saw_Adobe_marker = TRUE;
- cinfo->Adobe_transform = (UINT8) transform;
- } else {
- /* Start of APP14 does not match "Adobe", or too short */
- TRACEMS1(cinfo, 1, JTRC_APP14, (int) (datalen + remaining));
- }
-}
-
-
-METHODDEF(boolean)
-get_interesting_appn (j_decompress_ptr cinfo)
-/* Process an APP0 or APP14 marker without saving it */
-{
- INT32 length;
- JOCTET b[APPN_DATA_LEN];
- unsigned int i, numtoread;
- INPUT_VARS(cinfo);
-
- INPUT_2BYTES(cinfo, length, return FALSE);
- length -= 2;
-
- /* get the interesting part of the marker data */
- if (length >= APPN_DATA_LEN)
- numtoread = APPN_DATA_LEN;
- else if (length > 0)
- numtoread = (unsigned int) length;
- else
- numtoread = 0;
- for (i = 0; i < numtoread; i++)
- INPUT_BYTE(cinfo, b[i], return FALSE);
- length -= numtoread;
-
- /* process it */
- switch (cinfo->unread_marker) {
- case M_APP0:
- examine_app0(cinfo, (JOCTET FAR *) b, numtoread, length);
- break;
- case M_APP14:
- examine_app14(cinfo, (JOCTET FAR *) b, numtoread, length);
- break;
- default:
- /* can't get here unless jpeg_save_markers chooses wrong processor */
- ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker);
- break;
- }
-
- /* skip any remaining data -- could be lots */
- INPUT_SYNC(cinfo);
- if (length > 0)
- (*cinfo->src->skip_input_data) (cinfo, (long) length);
-
- return TRUE;
-}
-
-
-#ifdef SAVE_MARKERS_SUPPORTED
-
-METHODDEF(boolean)
-save_marker (j_decompress_ptr cinfo)
-/* Save an APPn or COM marker into the marker list */
-{
- my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
- jpeg_saved_marker_ptr cur_marker = marker->cur_marker;
- unsigned int bytes_read, data_length;
- JOCTET FAR * data;
- INT32 length = 0;
- INPUT_VARS(cinfo);
-
- if (cur_marker == NULL) {
- /* begin reading a marker */
- INPUT_2BYTES(cinfo, length, return FALSE);
- length -= 2;
- if (length >= 0) { /* watch out for bogus length word */
- /* figure out how much we want to save */
- unsigned int limit;
- if (cinfo->unread_marker == (int) M_COM)
- limit = marker->length_limit_COM;
- else
- limit = marker->length_limit_APPn[cinfo->unread_marker - (int) M_APP0];
- if ((unsigned int) length < limit)
- limit = (unsigned int) length;
- /* allocate and initialize the marker item */
- cur_marker = (jpeg_saved_marker_ptr)
- (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(struct jpeg_marker_struct) + limit);
- cur_marker->next = NULL;
- cur_marker->marker = (UINT8) cinfo->unread_marker;
- cur_marker->original_length = (unsigned int) length;
- cur_marker->data_length = limit;
- /* data area is just beyond the jpeg_marker_struct */
- data = cur_marker->data = (JOCTET FAR *) (cur_marker + 1);
- marker->cur_marker = cur_marker;
- marker->bytes_read = 0;
- bytes_read = 0;
- data_length = limit;
- } else {
- /* deal with bogus length word */
- bytes_read = data_length = 0;
- data = NULL;
- }
- } else {
- /* resume reading a marker */
- bytes_read = marker->bytes_read;
- data_length = cur_marker->data_length;
- data = cur_marker->data + bytes_read;
- }
-
- while (bytes_read < data_length) {
- INPUT_SYNC(cinfo); /* move the restart point to here */
- marker->bytes_read = bytes_read;
- /* If there's not at least one byte in buffer, suspend */
- MAKE_BYTE_AVAIL(cinfo, return FALSE);
- /* Copy bytes with reasonable rapidity */
- while (bytes_read < data_length && bytes_in_buffer > 0) {
- *data++ = *next_input_byte++;
- bytes_in_buffer--;
- bytes_read++;
- }
- }
-
- /* Done reading what we want to read */
- if (cur_marker != NULL) { /* will be NULL if bogus length word */
- /* Add new marker to end of list */
- if (cinfo->marker_list == NULL) {
- cinfo->marker_list = cur_marker;
- } else {
- jpeg_saved_marker_ptr prev = cinfo->marker_list;
- while (prev->next != NULL)
- prev = prev->next;
- prev->next = cur_marker;
- }
- /* Reset pointer & calc remaining data length */
- data = cur_marker->data;
- length = cur_marker->original_length - data_length;
- }
- /* Reset to initial state for next marker */
- marker->cur_marker = NULL;
-
- /* Process the marker if interesting; else just make a generic trace msg */
- switch (cinfo->unread_marker) {
- case M_APP0:
- examine_app0(cinfo, data, data_length, length);
- break;
- case M_APP14:
- examine_app14(cinfo, data, data_length, length);
- break;
- default:
- TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker,
- (int) (data_length + length));
- break;
- }
-
- /* skip any remaining data -- could be lots */
- INPUT_SYNC(cinfo); /* do before skip_input_data */
- if (length > 0)
- (*cinfo->src->skip_input_data) (cinfo, (long) length);
-
- return TRUE;
-}
-
-#endif /* SAVE_MARKERS_SUPPORTED */
-
-
-METHODDEF(boolean)
-skip_variable (j_decompress_ptr cinfo)
-/* Skip over an unknown or uninteresting variable-length marker */
-{
- INT32 length;
- INPUT_VARS(cinfo);
-
- INPUT_2BYTES(cinfo, length, return FALSE);
- length -= 2;
-
- TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) length);
-
- INPUT_SYNC(cinfo); /* do before skip_input_data */
- if (length > 0)
- (*cinfo->src->skip_input_data) (cinfo, (long) length);
-
- return TRUE;
-}
-
-
-/*
- * Find the next JPEG marker, save it in cinfo->unread_marker.
- * Returns FALSE if had to suspend before reaching a marker;
- * in that case cinfo->unread_marker is unchanged.
- *
- * Note that the result might not be a valid marker code,
- * but it will never be 0 or FF.
- */
-
-LOCAL(boolean)
-next_marker (j_decompress_ptr cinfo)
-{
- int c;
- INPUT_VARS(cinfo);
-
- for (;;) {
- INPUT_BYTE(cinfo, c, return FALSE);
- /* Skip any non-FF bytes.
- * This may look a bit inefficient, but it will not occur in a valid file.
- * We sync after each discarded byte so that a suspending data source
- * can discard the byte from its buffer.
- */
- while (c != 0xFF) {
- cinfo->marker->discarded_bytes++;
- INPUT_SYNC(cinfo);
- INPUT_BYTE(cinfo, c, return FALSE);
- }
- /* This loop swallows any duplicate FF bytes. Extra FFs are legal as
- * pad bytes, so don't count them in discarded_bytes. We assume there
- * will not be so many consecutive FF bytes as to overflow a suspending
- * data source's input buffer.
- */
- do {
- INPUT_BYTE(cinfo, c, return FALSE);
- } while (c == 0xFF);
- if (c != 0)
- break; /* found a valid marker, exit loop */
- /* Reach here if we found a stuffed-zero data sequence (FF/00).
- * Discard it and loop back to try again.
- */
- cinfo->marker->discarded_bytes += 2;
- INPUT_SYNC(cinfo);
- }
-
- if (cinfo->marker->discarded_bytes != 0) {
- WARNMS2(cinfo, JWRN_EXTRANEOUS_DATA, cinfo->marker->discarded_bytes, c);
- cinfo->marker->discarded_bytes = 0;
- }
-
- cinfo->unread_marker = c;
-
- INPUT_SYNC(cinfo);
- return TRUE;
-}
-
-
-LOCAL(boolean)
-first_marker (j_decompress_ptr cinfo)
-/* Like next_marker, but used to obtain the initial SOI marker. */
-/* For this marker, we do not allow preceding garbage or fill; otherwise,
- * we might well scan an entire input file before realizing it ain't JPEG.
- * If an application wants to process non-JFIF files, it must seek to the
- * SOI before calling the JPEG library.
- */
-{
- int c, c2;
- INPUT_VARS(cinfo);
-
- INPUT_BYTE(cinfo, c, return FALSE);
- INPUT_BYTE(cinfo, c2, return FALSE);
- if (c != 0xFF || c2 != (int) M_SOI)
- ERREXIT2(cinfo, JERR_NO_SOI, c, c2);
-
- cinfo->unread_marker = c2;
-
- INPUT_SYNC(cinfo);
- return TRUE;
-}
-
-
-/*
- * Read markers until SOS or EOI.
- *
- * Returns same codes as are defined for jpeg_consume_input:
- * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
- */
-
-METHODDEF(int)
-read_markers (j_decompress_ptr cinfo)
-{
- /* Outer loop repeats once for each marker. */
- for (;;) {
- /* Collect the marker proper, unless we already did. */
- /* NB: first_marker() enforces the requirement that SOI appear first. */
- if (cinfo->unread_marker == 0) {
- if (! cinfo->marker->saw_SOI) {
- if (! first_marker(cinfo))
- return JPEG_SUSPENDED;
- } else {
- if (! next_marker(cinfo))
- return JPEG_SUSPENDED;
- }
- }
-
- /*
- * Save the position of the fist marker after SOF.
- */
- if (cinfo->marker->current_sos_marker_position == -1)
- cinfo->marker->current_sos_marker_position =
- jget_input_stream_position(cinfo) - 2;
-
- /* At this point cinfo->unread_marker contains the marker code and the
- * input point is just past the marker proper, but before any parameters.
- * A suspension will cause us to return with this state still true.
- */
- switch (cinfo->unread_marker) {
- case M_SOI:
- if (! get_soi(cinfo))
- return JPEG_SUSPENDED;
- break;
-
- case M_SOF0: /* Baseline */
- case M_SOF1: /* Extended sequential, Huffman */
- if (! get_sof(cinfo, FALSE, FALSE))
- return JPEG_SUSPENDED;
- break;
-
- case M_SOF2: /* Progressive, Huffman */
- cinfo->marker->current_sos_marker_position = -1;
- if (! get_sof(cinfo, TRUE, FALSE))
- return JPEG_SUSPENDED;
- break;
-
- case M_SOF9: /* Extended sequential, arithmetic */
- if (! get_sof(cinfo, FALSE, TRUE))
- return JPEG_SUSPENDED;
- break;
-
- case M_SOF10: /* Progressive, arithmetic */
- if (! get_sof(cinfo, TRUE, TRUE))
- return JPEG_SUSPENDED;
- break;
-
- /* Currently unsupported SOFn types */
- case M_SOF3: /* Lossless, Huffman */
- case M_SOF5: /* Differential sequential, Huffman */
- case M_SOF6: /* Differential progressive, Huffman */
- case M_SOF7: /* Differential lossless, Huffman */
- case M_JPG: /* Reserved for JPEG extensions */
- case M_SOF11: /* Lossless, arithmetic */
- case M_SOF13: /* Differential sequential, arithmetic */
- case M_SOF14: /* Differential progressive, arithmetic */
- case M_SOF15: /* Differential lossless, arithmetic */
- ERREXIT1(cinfo, JERR_SOF_UNSUPPORTED, cinfo->unread_marker);
- break;
-
- case M_SOS:
- if (! get_sos(cinfo))
- return JPEG_SUSPENDED;
- cinfo->unread_marker = 0; /* processed the marker */
- return JPEG_REACHED_SOS;
-
- case M_EOI:
- TRACEMS(cinfo, 1, JTRC_EOI);
- cinfo->unread_marker = 0; /* processed the marker */
- return JPEG_REACHED_EOI;
-
- case M_DAC:
- if (! get_dac(cinfo))
- return JPEG_SUSPENDED;
- break;
-
- case M_DHT:
- if (! get_dht(cinfo))
- return JPEG_SUSPENDED;
- break;
-
- case M_DQT:
- if (! get_dqt(cinfo))
- return JPEG_SUSPENDED;
- break;
-
- case M_DRI:
- if (! get_dri(cinfo))
- return JPEG_SUSPENDED;
- break;
-
- case M_APP0:
- case M_APP1:
- case M_APP2:
- case M_APP3:
- case M_APP4:
- case M_APP5:
- case M_APP6:
- case M_APP7:
- case M_APP8:
- case M_APP9:
- case M_APP10:
- case M_APP11:
- case M_APP12:
- case M_APP13:
- case M_APP14:
- case M_APP15:
- if (! (*((my_marker_ptr) cinfo->marker)->process_APPn[
- cinfo->unread_marker - (int) M_APP0]) (cinfo))
- return JPEG_SUSPENDED;
- break;
-
- case M_COM:
- if (! (*((my_marker_ptr) cinfo->marker)->process_COM) (cinfo))
- return JPEG_SUSPENDED;
- break;
-
- case M_RST0: /* these are all parameterless */
- case M_RST1:
- case M_RST2:
- case M_RST3:
- case M_RST4:
- case M_RST5:
- case M_RST6:
- case M_RST7:
- case M_TEM:
- TRACEMS1(cinfo, 1, JTRC_PARMLESS_MARKER, cinfo->unread_marker);
- break;
-
- case M_DNL: /* Ignore DNL ... perhaps the wrong thing */
- if (! skip_variable(cinfo))
- return JPEG_SUSPENDED;
- break;
-
- default: /* must be DHP, EXP, JPGn, or RESn */
- /* For now, we treat the reserved markers as fatal errors since they are
- * likely to be used to signal incompatible JPEG Part 3 extensions.
- * Once the JPEG 3 version-number marker is well defined, this code
- * ought to change!
- */
- ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker);
- break;
- }
- /* Successfully processed marker, so reset state variable */
- cinfo->unread_marker = 0;
- } /* end loop */
-}
-
-
-/*
- * Read a restart marker, which is expected to appear next in the datastream;
- * if the marker is not there, take appropriate recovery action.
- * Returns FALSE if suspension is required.
- *
- * This is called by the entropy decoder after it has read an appropriate
- * number of MCUs. cinfo->unread_marker may be nonzero if the entropy decoder
- * has already read a marker from the data source. Under normal conditions
- * cinfo->unread_marker will be reset to 0 before returning; if not reset,
- * it holds a marker which the decoder will be unable to read past.
- */
-
-METHODDEF(boolean)
-read_restart_marker (j_decompress_ptr cinfo)
-{
- /* Obtain a marker unless we already did. */
- /* Note that next_marker will complain if it skips any data. */
- if (cinfo->unread_marker == 0) {
- if (! next_marker(cinfo))
- return FALSE;
- }
-
- if (cinfo->unread_marker ==
- ((int) M_RST0 + cinfo->marker->next_restart_num)) {
- /* Normal case --- swallow the marker and let entropy decoder continue */
- TRACEMS1(cinfo, 3, JTRC_RST, cinfo->marker->next_restart_num);
- cinfo->unread_marker = 0;
- } else {
- /* Uh-oh, the restart markers have been messed up. */
- /* Let the data source manager determine how to resync. */
- if (! (*cinfo->src->resync_to_restart) (cinfo,
- cinfo->marker->next_restart_num))
- return FALSE;
- }
-
- /* Update next-restart state */
- cinfo->marker->next_restart_num = (cinfo->marker->next_restart_num + 1) & 7;
-
- return TRUE;
-}
-
-
-/*
- * This is the default resync_to_restart method for data source managers
- * to use if they don't have any better approach. Some data source managers
- * may be able to back up, or may have additional knowledge about the data
- * which permits a more intelligent recovery strategy; such managers would
- * presumably supply their own resync method.
- *
- * read_restart_marker calls resync_to_restart if it finds a marker other than
- * the restart marker it was expecting. (This code is *not* used unless
- * a nonzero restart interval has been declared.) cinfo->unread_marker is
- * the marker code actually found (might be anything, except 0 or FF).
- * The desired restart marker number (0..7) is passed as a parameter.
- * This routine is supposed to apply whatever error recovery strategy seems
- * appropriate in order to position the input stream to the next data segment.
- * Note that cinfo->unread_marker is treated as a marker appearing before
- * the current data-source input point; usually it should be reset to zero
- * before returning.
- * Returns FALSE if suspension is required.
- *
- * This implementation is substantially constrained by wanting to treat the
- * input as a data stream; this means we can't back up. Therefore, we have
- * only the following actions to work with:
- * 1. Simply discard the marker and let the entropy decoder resume at next
- * byte of file.
- * 2. Read forward until we find another marker, discarding intervening
- * data. (In theory we could look ahead within the current bufferload,
- * without having to discard data if we don't find the desired marker.
- * This idea is not implemented here, in part because it makes behavior
- * dependent on buffer size and chance buffer-boundary positions.)
- * 3. Leave the marker unread (by failing to zero cinfo->unread_marker).
- * This will cause the entropy decoder to process an empty data segment,
- * inserting dummy zeroes, and then we will reprocess the marker.
- *
- * #2 is appropriate if we think the desired marker lies ahead, while #3 is
- * appropriate if the found marker is a future restart marker (indicating
- * that we have missed the desired restart marker, probably because it got
- * corrupted).
- * We apply #2 or #3 if the found marker is a restart marker no more than
- * two counts behind or ahead of the expected one. We also apply #2 if the
- * found marker is not a legal JPEG marker code (it's certainly bogus data).
- * If the found marker is a restart marker more than 2 counts away, we do #1
- * (too much risk that the marker is erroneous; with luck we will be able to
- * resync at some future point).
- * For any valid non-restart JPEG marker, we apply #3. This keeps us from
- * overrunning the end of a scan. An implementation limited to single-scan
- * files might find it better to apply #2 for markers other than EOI, since
- * any other marker would have to be bogus data in that case.
- */
-
-GLOBAL(boolean)
-jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired)
-{
- int marker = cinfo->unread_marker;
- int action = 1;
-
- /* Always put up a warning. */
- WARNMS2(cinfo, JWRN_MUST_RESYNC, marker, desired);
-
- /* Outer loop handles repeated decision after scanning forward. */
- for (;;) {
- if (marker < (int) M_SOF0)
- action = 2; /* invalid marker */
- else if (marker < (int) M_RST0 || marker > (int) M_RST7)
- action = 3; /* valid non-restart marker */
- else {
- if (marker == ((int) M_RST0 + ((desired+1) & 7)) ||
- marker == ((int) M_RST0 + ((desired+2) & 7)))
- action = 3; /* one of the next two expected restarts */
- else if (marker == ((int) M_RST0 + ((desired-1) & 7)) ||
- marker == ((int) M_RST0 + ((desired-2) & 7)))
- action = 2; /* a prior restart, so advance */
- else
- action = 1; /* desired restart or too far away */
- }
- TRACEMS2(cinfo, 4, JTRC_RECOVERY_ACTION, marker, action);
- switch (action) {
- case 1:
- /* Discard marker and let entropy decoder resume processing. */
- cinfo->unread_marker = 0;
- return TRUE;
- case 2:
- /* Scan to the next marker, and repeat the decision loop. */
- if (! next_marker(cinfo))
- return FALSE;
- marker = cinfo->unread_marker;
- break;
- case 3:
- /* Return without advancing past this marker. */
- /* Entropy decoder will be forced to process an empty segment. */
- return TRUE;
- }
- } /* end loop */
-}
-
-/*
- * Get the position for all SOS markers in the image.
- */
-
-METHODDEF(void)
-get_sos_marker_position(j_decompress_ptr cinfo, huffman_index *index)
-{
- unsigned char *head;
- int count = 0;
- int retcode = JPEG_REACHED_SOS;
-
- while (cinfo->src->bytes_in_buffer > 0) {
- if (retcode == JPEG_REACHED_SOS) {
- jpeg_configure_huffman_index_scan(cinfo, index, count++,
- cinfo->marker->current_sos_marker_position);
- // Skips scan content to the next non-RST JPEG marker.
- while(next_marker(cinfo) &&
- cinfo->unread_marker >= M_RST0 && cinfo->unread_marker <= M_RST7)
- ;
- cinfo->marker->current_sos_marker_position =
- jget_input_stream_position(cinfo) - 2;
- retcode = read_markers(cinfo);
- } else {
- break;
- }
- }
-}
-
-/*
- * Reset marker processing state to begin a fresh datastream.
- */
-
-METHODDEF(void)
-reset_marker_reader (j_decompress_ptr cinfo)
-{
- my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
-
- cinfo->comp_info = NULL; /* until allocated by get_sof */
- cinfo->input_scan_number = 0; /* no SOS seen yet */
- cinfo->unread_marker = 0; /* no pending marker */
- marker->pub.saw_SOI = FALSE; /* set internal state too */
- marker->pub.saw_SOF = FALSE;
- marker->pub.discarded_bytes = 0;
- marker->cur_marker = NULL;
-}
-
-
-/*
- * Initialize the marker reader module.
- * This is called only once, when the decompression object is created.
- */
-
-GLOBAL(void)
-jinit_marker_reader (j_decompress_ptr cinfo)
-{
- my_marker_ptr marker;
- int i;
-
- /* Create subobject in permanent pool */
- marker = (my_marker_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
- SIZEOF(my_marker_reader));
- cinfo->marker = (struct jpeg_marker_reader *) marker;
- /* Initialize public method pointers */
- marker->pub.reset_marker_reader = reset_marker_reader;
- marker->pub.read_markers = read_markers;
- marker->pub.read_restart_marker = read_restart_marker;
- marker->pub.get_sos_marker_position = get_sos_marker_position;
- /* Initialize COM/APPn processing.
- * By default, we examine and then discard APP0 and APP14,
- * but simply discard COM and all other APPn.
- */
- marker->process_COM = skip_variable;
- marker->length_limit_COM = 0;
- for (i = 0; i < 16; i++) {
- marker->process_APPn[i] = skip_variable;
- marker->length_limit_APPn[i] = 0;
- }
- marker->process_APPn[0] = get_interesting_appn;
- marker->process_APPn[14] = get_interesting_appn;
- /* Reset marker processing state */
- reset_marker_reader(cinfo);
-}
-
-
-/*
- * Control saving of COM and APPn markers into marker_list.
- */
-
-#ifdef SAVE_MARKERS_SUPPORTED
-
-GLOBAL(void)
-jpeg_save_markers (j_decompress_ptr cinfo, int marker_code,
- unsigned int length_limit)
-{
- my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
- long maxlength;
- jpeg_marker_parser_method processor;
-
- /* Length limit mustn't be larger than what we can allocate
- * (should only be a concern in a 16-bit environment).
- */
- maxlength = cinfo->mem->max_alloc_chunk - SIZEOF(struct jpeg_marker_struct);
- if (((long) length_limit) > maxlength)
- length_limit = (unsigned int) maxlength;
-
- /* Choose processor routine to use.
- * APP0/APP14 have special requirements.
- */
- if (length_limit) {
- processor = save_marker;
- /* If saving APP0/APP14, save at least enough for our internal use. */
- if (marker_code == (int) M_APP0 && length_limit < APP0_DATA_LEN)
- length_limit = APP0_DATA_LEN;
- else if (marker_code == (int) M_APP14 && length_limit < APP14_DATA_LEN)
- length_limit = APP14_DATA_LEN;
- } else {
- processor = skip_variable;
- /* If discarding APP0/APP14, use our regular on-the-fly processor. */
- if (marker_code == (int) M_APP0 || marker_code == (int) M_APP14)
- processor = get_interesting_appn;
- }
-
- if (marker_code == (int) M_COM) {
- marker->process_COM = processor;
- marker->length_limit_COM = length_limit;
- } else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) {
- marker->process_APPn[marker_code - (int) M_APP0] = processor;
- marker->length_limit_APPn[marker_code - (int) M_APP0] = length_limit;
- } else
- ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code);
-}
-
-#endif /* SAVE_MARKERS_SUPPORTED */
-
-
-/*
- * Install a special processing method for COM or APPn markers.
- */
-
-GLOBAL(void)
-jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code,
- jpeg_marker_parser_method routine)
-{
- my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
-
- if (marker_code == (int) M_COM)
- marker->process_COM = routine;
- else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15)
- marker->process_APPn[marker_code - (int) M_APP0] = routine;
- else
- ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code);
-}
diff --git a/libjpegtwrp/jdmaster.c b/libjpegtwrp/jdmaster.c
deleted file mode 100644
index e3da758b1..000000000
--- a/libjpegtwrp/jdmaster.c
+++ /dev/null
@@ -1,580 +0,0 @@
-/*
- * jdmaster.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains master control logic for the JPEG decompressor.
- * These routines are concerned with selecting the modules to be executed
- * and with determining the number of passes and the work to be done in each
- * pass.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Private state */
-
-typedef struct {
- struct jpeg_decomp_master pub; /* public fields */
-
- int pass_number; /* # of passes completed */
-
- boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */
-
- /* Saved references to initialized quantizer modules,
- * in case we need to switch modes.
- */
- struct jpeg_color_quantizer * quantizer_1pass;
- struct jpeg_color_quantizer * quantizer_2pass;
-} my_decomp_master;
-
-typedef my_decomp_master * my_master_ptr;
-
-
-/*
- * Determine whether merged upsample/color conversion should be used.
- * CRUCIAL: this must match the actual capabilities of jdmerge.c!
- */
-
-LOCAL(boolean)
-use_merged_upsample (j_decompress_ptr cinfo)
-{
-#ifdef UPSAMPLE_MERGING_SUPPORTED
- /* Merging is the equivalent of plain box-filter upsampling */
- if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling)
- return FALSE;
-
-#ifdef ANDROID_RGB
- /* jdmerge.c only supports YCC=>RGB565 and YCC=>RGB color conversion */
- if (cinfo->jpeg_color_space != JCS_YCbCr ||
- cinfo->num_components != 3 ||
- cinfo->out_color_components != 3 ||
- (cinfo->out_color_space != JCS_RGB_565 &&
- cinfo->out_color_space != JCS_RGB)) {
- return FALSE;
- }
-#else
- /* jdmerge.c only supports YCC=>RGB color conversion */
- if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 ||
- cinfo->out_color_space != JCS_RGB ||
- cinfo->out_color_components != RGB_PIXELSIZE)
- return FALSE;
-#endif
-
- /* and it only handles 2h1v or 2h2v sampling ratios */
- if (cinfo->comp_info[0].h_samp_factor != 2 ||
- cinfo->comp_info[1].h_samp_factor != 1 ||
- cinfo->comp_info[2].h_samp_factor != 1 ||
- cinfo->comp_info[0].v_samp_factor > 2 ||
- cinfo->comp_info[1].v_samp_factor != 1 ||
- cinfo->comp_info[2].v_samp_factor != 1)
- return FALSE;
- /* furthermore, it doesn't work if we've scaled the IDCTs differently */
- if (cinfo->comp_info[0].DCT_scaled_size != cinfo->min_DCT_scaled_size ||
- cinfo->comp_info[1].DCT_scaled_size != cinfo->min_DCT_scaled_size ||
- cinfo->comp_info[2].DCT_scaled_size != cinfo->min_DCT_scaled_size)
- return FALSE;
- /* ??? also need to test for upsample-time rescaling, when & if supported */
- return TRUE; /* by golly, it'll work... */
-#else
- return FALSE;
-#endif
-}
-
-
-/*
- * Compute output image dimensions and related values.
- * NOTE: this is exported for possible use by application.
- * Hence it mustn't do anything that can't be done twice.
- * Also note that it may be called before the master module is initialized!
- */
-
-GLOBAL(void)
-jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
-/* Do computations that are needed before master selection phase */
-{
-#ifdef IDCT_SCALING_SUPPORTED
- int ci;
- jpeg_component_info *compptr;
-#endif
-
- /* Prevent application from calling me at wrong times */
-#if ANDROID_TILE_BASED_DECODE
- // Tile based decoding may call this function several times.
- if (!cinfo->tile_decode)
-#endif
- if (cinfo->global_state != DSTATE_READY)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
-#ifdef IDCT_SCALING_SUPPORTED
-
- /* Compute actual output image dimensions and DCT scaling choices. */
- if (cinfo->scale_num * 8 <= cinfo->scale_denom) {
- /* Provide 1/8 scaling */
- cinfo->output_width = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_width, 8L);
- cinfo->output_height = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height, 8L);
- cinfo->min_DCT_scaled_size = 1;
- } else if (cinfo->scale_num * 4 <= cinfo->scale_denom) {
- /* Provide 1/4 scaling */
- cinfo->output_width = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_width, 4L);
- cinfo->output_height = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height, 4L);
- cinfo->min_DCT_scaled_size = 2;
- } else if (cinfo->scale_num * 2 <= cinfo->scale_denom) {
- /* Provide 1/2 scaling */
- cinfo->output_width = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_width, 2L);
- cinfo->output_height = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height, 2L);
- cinfo->min_DCT_scaled_size = 4;
- } else {
- /* Provide 1/1 scaling */
- cinfo->output_width = cinfo->image_width;
- cinfo->output_height = cinfo->image_height;
- cinfo->min_DCT_scaled_size = DCTSIZE;
- }
- /* In selecting the actual DCT scaling for each component, we try to
- * scale up the chroma components via IDCT scaling rather than upsampling.
- * This saves time if the upsampler gets to use 1:1 scaling.
- * Note this code assumes that the supported DCT scalings are powers of 2.
- */
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- int ssize = cinfo->min_DCT_scaled_size;
- while (ssize < DCTSIZE &&
- (compptr->h_samp_factor * ssize * 2 <=
- cinfo->max_h_samp_factor * cinfo->min_DCT_scaled_size) &&
- (compptr->v_samp_factor * ssize * 2 <=
- cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size)) {
- ssize = ssize * 2;
- }
- compptr->DCT_scaled_size = ssize;
- }
-
- /* Recompute downsampled dimensions of components;
- * application needs to know these if using raw downsampled data.
- */
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- /* Size in samples, after IDCT scaling */
- compptr->downsampled_width = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_width *
- (long) (compptr->h_samp_factor * compptr->DCT_scaled_size),
- (long) (cinfo->max_h_samp_factor * DCTSIZE));
- compptr->downsampled_height = (JDIMENSION)
- jdiv_round_up((long) cinfo->image_height *
- (long) (compptr->v_samp_factor * compptr->DCT_scaled_size),
- (long) (cinfo->max_v_samp_factor * DCTSIZE));
- }
-
-#else /* !IDCT_SCALING_SUPPORTED */
-
- /* Hardwire it to "no scaling" */
- cinfo->output_width = cinfo->image_width;
- cinfo->output_height = cinfo->image_height;
- /* jdinput.c has already initialized DCT_scaled_size to DCTSIZE,
- * and has computed unscaled downsampled_width and downsampled_height.
- */
-
-#endif /* IDCT_SCALING_SUPPORTED */
-
- /* Report number of components in selected colorspace. */
- /* Probably this should be in the color conversion module... */
- switch (cinfo->out_color_space) {
- case JCS_GRAYSCALE:
- cinfo->out_color_components = 1;
- break;
- case JCS_RGB:
-#if RGB_PIXELSIZE != 3
- cinfo->out_color_components = RGB_PIXELSIZE;
- break;
-#endif /* else share code with YCbCr */
-#ifdef ANDROID_RGB
- case JCS_RGB_565:
-#endif
- case JCS_YCbCr:
- cinfo->out_color_components = 3;
- break;
- case JCS_CMYK:
- case JCS_YCCK:
-#ifdef ANDROID_RGB
- case JCS_RGBA_8888:
-#endif
- cinfo->out_color_components = 4;
- break;
- default: /* else must be same colorspace as in file */
- cinfo->out_color_components = cinfo->num_components;
- break;
- }
- cinfo->output_components = (cinfo->quantize_colors ? 1 :
- cinfo->out_color_components);
-
- /* See if upsampler will want to emit more than one row at a time */
- if (use_merged_upsample(cinfo))
- cinfo->rec_outbuf_height = cinfo->max_v_samp_factor;
- else
- cinfo->rec_outbuf_height = 1;
-}
-
-
-/*
- * Several decompression processes need to range-limit values to the range
- * 0..MAXJSAMPLE; the input value may fall somewhat outside this range
- * due to noise introduced by quantization, roundoff error, etc. These
- * processes are inner loops and need to be as fast as possible. On most
- * machines, particularly CPUs with pipelines or instruction prefetch,
- * a (subscript-check-less) C table lookup
- * x = sample_range_limit[x];
- * is faster than explicit tests
- * if (x < 0) x = 0;
- * else if (x > MAXJSAMPLE) x = MAXJSAMPLE;
- * These processes all use a common table prepared by the routine below.
- *
- * For most steps we can mathematically guarantee that the initial value
- * of x is within MAXJSAMPLE+1 of the legal range, so a table running from
- * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient. But for the initial
- * limiting step (just after the IDCT), a wildly out-of-range value is
- * possible if the input data is corrupt. To avoid any chance of indexing
- * off the end of memory and getting a bad-pointer trap, we perform the
- * post-IDCT limiting thus:
- * x = range_limit[x & MASK];
- * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit
- * samples. Under normal circumstances this is more than enough range and
- * a correct output will be generated; with bogus input data the mask will
- * cause wraparound, and we will safely generate a bogus-but-in-range output.
- * For the post-IDCT step, we want to convert the data from signed to unsigned
- * representation by adding CENTERJSAMPLE at the same time that we limit it.
- * So the post-IDCT limiting table ends up looking like this:
- * CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE,
- * MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times),
- * 0 (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times),
- * 0,1,...,CENTERJSAMPLE-1
- * Negative inputs select values from the upper half of the table after
- * masking.
- *
- * We can save some space by overlapping the start of the post-IDCT table
- * with the simpler range limiting table. The post-IDCT table begins at
- * sample_range_limit + CENTERJSAMPLE.
- *
- * Note that the table is allocated in near data space on PCs; it's small
- * enough and used often enough to justify this.
- */
-
-LOCAL(void)
-prepare_range_limit_table (j_decompress_ptr cinfo)
-/* Allocate and fill in the sample_range_limit table */
-{
- JSAMPLE * table;
- int i;
-
- table = (JSAMPLE *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE));
- table += (MAXJSAMPLE+1); /* allow negative subscripts of simple table */
- cinfo->sample_range_limit = table;
- /* First segment of "simple" table: limit[x] = 0 for x < 0 */
- MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE));
- /* Main part of "simple" table: limit[x] = x */
- for (i = 0; i <= MAXJSAMPLE; i++)
- table[i] = (JSAMPLE) i;
- table += CENTERJSAMPLE; /* Point to where post-IDCT table starts */
- /* End of simple table, rest of first half of post-IDCT table */
- for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++)
- table[i] = MAXJSAMPLE;
- /* Second half of post-IDCT table */
- MEMZERO(table + (2 * (MAXJSAMPLE+1)),
- (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE));
- MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE),
- cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE));
-}
-
-
-/*
- * Master selection of decompression modules.
- * This is done once at jpeg_start_decompress time. We determine
- * which modules will be used and give them appropriate initialization calls.
- * We also initialize the decompressor input side to begin consuming data.
- *
- * Since jpeg_read_header has finished, we know what is in the SOF
- * and (first) SOS markers. We also have all the application parameter
- * settings.
- */
-
-LOCAL(void)
-master_selection (j_decompress_ptr cinfo)
-{
- my_master_ptr master = (my_master_ptr) cinfo->master;
- boolean use_c_buffer;
- long samplesperrow;
- JDIMENSION jd_samplesperrow;
-
- /* Initialize dimensions and other stuff */
- jpeg_calc_output_dimensions(cinfo);
- prepare_range_limit_table(cinfo);
-
- /* Width of an output scanline must be representable as JDIMENSION. */
- samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components;
- jd_samplesperrow = (JDIMENSION) samplesperrow;
- if ((long) jd_samplesperrow != samplesperrow)
- ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
-
- /* Initialize my private state */
- master->pass_number = 0;
- master->using_merged_upsample = use_merged_upsample(cinfo);
-
- /* Color quantizer selection */
- master->quantizer_1pass = NULL;
- master->quantizer_2pass = NULL;
- /* No mode changes if not using buffered-image mode. */
- if (! cinfo->quantize_colors || ! cinfo->buffered_image) {
- cinfo->enable_1pass_quant = FALSE;
- cinfo->enable_external_quant = FALSE;
- cinfo->enable_2pass_quant = FALSE;
- }
- if (cinfo->quantize_colors) {
- if (cinfo->raw_data_out)
- ERREXIT(cinfo, JERR_NOTIMPL);
- /* 2-pass quantizer only works in 3-component color space. */
- if (cinfo->out_color_components != 3) {
- cinfo->enable_1pass_quant = TRUE;
- cinfo->enable_external_quant = FALSE;
- cinfo->enable_2pass_quant = FALSE;
- cinfo->colormap = NULL;
- } else if (cinfo->colormap != NULL) {
- cinfo->enable_external_quant = TRUE;
- } else if (cinfo->two_pass_quantize) {
- cinfo->enable_2pass_quant = TRUE;
- } else {
- cinfo->enable_1pass_quant = TRUE;
- }
-
- if (cinfo->enable_1pass_quant) {
-#ifdef QUANT_1PASS_SUPPORTED
- jinit_1pass_quantizer(cinfo);
- master->quantizer_1pass = cinfo->cquantize;
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
- }
-
- /* We use the 2-pass code to map to external colormaps. */
- if (cinfo->enable_2pass_quant || cinfo->enable_external_quant) {
-#ifdef QUANT_2PASS_SUPPORTED
- jinit_2pass_quantizer(cinfo);
- master->quantizer_2pass = cinfo->cquantize;
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
- }
- /* If both quantizers are initialized, the 2-pass one is left active;
- * this is necessary for starting with quantization to an external map.
- */
- }
-
- /* Post-processing: in particular, color conversion first */
- if (! cinfo->raw_data_out) {
- if (master->using_merged_upsample) {
-#ifdef UPSAMPLE_MERGING_SUPPORTED
- jinit_merged_upsampler(cinfo); /* does color conversion too */
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
- } else {
- jinit_color_deconverter(cinfo);
- jinit_upsampler(cinfo);
- }
- jinit_d_post_controller(cinfo, cinfo->enable_2pass_quant);
- }
- /* Inverse DCT */
- jinit_inverse_dct(cinfo);
- /* Entropy decoding: either Huffman or arithmetic coding. */
- if (cinfo->arith_code) {
- ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
- } else {
- if (cinfo->progressive_mode) {
-#ifdef D_PROGRESSIVE_SUPPORTED
- jinit_phuff_decoder(cinfo);
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
- } else
- jinit_huff_decoder(cinfo);
- }
-
- /* Initialize principal buffer controllers. */
- use_c_buffer = cinfo->inputctl->has_multiple_scans || cinfo->buffered_image;
- jinit_d_coef_controller(cinfo, use_c_buffer);
-
- if (! cinfo->raw_data_out)
- jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */);
-
- /* We can now tell the memory manager to allocate virtual arrays. */
- (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
-
- /* Initialize input side of decompressor to consume first scan. */
- (*cinfo->inputctl->start_input_pass) (cinfo);
-
-#ifdef D_MULTISCAN_FILES_SUPPORTED
- /* If jpeg_start_decompress will read the whole file, initialize
- * progress monitoring appropriately. The input step is counted
- * as one pass.
- */
- if (cinfo->progress != NULL && ! cinfo->buffered_image &&
- cinfo->inputctl->has_multiple_scans) {
- int nscans;
- /* Estimate number of scans to set pass_limit. */
- if (cinfo->progressive_mode) {
- /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */
- nscans = 2 + 3 * cinfo->num_components;
- } else {
- /* For a nonprogressive multiscan file, estimate 1 scan per component. */
- nscans = cinfo->num_components;
- }
- cinfo->progress->pass_counter = 0L;
- cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans;
- cinfo->progress->completed_passes = 0;
- cinfo->progress->total_passes = (cinfo->enable_2pass_quant ? 3 : 2);
- /* Count the input pass as done */
- master->pass_number++;
- }
-#endif /* D_MULTISCAN_FILES_SUPPORTED */
-}
-
-
-/*
- * Per-pass setup.
- * This is called at the beginning of each output pass. We determine which
- * modules will be active during this pass and give them appropriate
- * start_pass calls. We also set is_dummy_pass to indicate whether this
- * is a "real" output pass or a dummy pass for color quantization.
- * (In the latter case, jdapistd.c will crank the pass to completion.)
- */
-
-METHODDEF(void)
-prepare_for_output_pass (j_decompress_ptr cinfo)
-{
- my_master_ptr master = (my_master_ptr) cinfo->master;
-
- if (master->pub.is_dummy_pass) {
-#ifdef QUANT_2PASS_SUPPORTED
- /* Final pass of 2-pass quantization */
- master->pub.is_dummy_pass = FALSE;
- (*cinfo->cquantize->start_pass) (cinfo, FALSE);
- (*cinfo->post->start_pass) (cinfo, JBUF_CRANK_DEST);
- (*cinfo->main->start_pass) (cinfo, JBUF_CRANK_DEST);
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif /* QUANT_2PASS_SUPPORTED */
- } else {
- if (cinfo->quantize_colors && cinfo->colormap == NULL) {
- /* Select new quantization method */
- if (cinfo->two_pass_quantize && cinfo->enable_2pass_quant) {
- cinfo->cquantize = master->quantizer_2pass;
- master->pub.is_dummy_pass = TRUE;
- } else if (cinfo->enable_1pass_quant) {
- cinfo->cquantize = master->quantizer_1pass;
- } else {
- ERREXIT(cinfo, JERR_MODE_CHANGE);
- }
- }
- (*cinfo->idct->start_pass) (cinfo);
- (*cinfo->coef->start_output_pass) (cinfo);
- if (! cinfo->raw_data_out) {
- if (! master->using_merged_upsample)
- (*cinfo->cconvert->start_pass) (cinfo);
- (*cinfo->upsample->start_pass) (cinfo);
- if (cinfo->quantize_colors)
- (*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass);
- (*cinfo->post->start_pass) (cinfo,
- (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU));
- (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU);
- }
- }
-
- /* Set up progress monitor's pass info if present */
- if (cinfo->progress != NULL) {
- cinfo->progress->completed_passes = master->pass_number;
- cinfo->progress->total_passes = master->pass_number +
- (master->pub.is_dummy_pass ? 2 : 1);
- /* In buffered-image mode, we assume one more output pass if EOI not
- * yet reached, but no more passes if EOI has been reached.
- */
- if (cinfo->buffered_image && ! cinfo->inputctl->eoi_reached) {
- cinfo->progress->total_passes += (cinfo->enable_2pass_quant ? 2 : 1);
- }
- }
-}
-
-
-/*
- * Finish up at end of an output pass.
- */
-
-METHODDEF(void)
-finish_output_pass (j_decompress_ptr cinfo)
-{
- my_master_ptr master = (my_master_ptr) cinfo->master;
-
- if (cinfo->quantize_colors)
- (*cinfo->cquantize->finish_pass) (cinfo);
- master->pass_number++;
-}
-
-
-#ifdef D_MULTISCAN_FILES_SUPPORTED
-
-/*
- * Switch to a new external colormap between output passes.
- */
-
-GLOBAL(void)
-jpeg_new_colormap (j_decompress_ptr cinfo)
-{
- my_master_ptr master = (my_master_ptr) cinfo->master;
-
- /* Prevent application from calling me at wrong times */
- if (cinfo->global_state != DSTATE_BUFIMAGE)
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
- if (cinfo->quantize_colors && cinfo->enable_external_quant &&
- cinfo->colormap != NULL) {
- /* Select 2-pass quantizer for external colormap use */
- cinfo->cquantize = master->quantizer_2pass;
- /* Notify quantizer of colormap change */
- (*cinfo->cquantize->new_color_map) (cinfo);
- master->pub.is_dummy_pass = FALSE; /* just in case */
- } else
- ERREXIT(cinfo, JERR_MODE_CHANGE);
-}
-
-#endif /* D_MULTISCAN_FILES_SUPPORTED */
-
-
-/*
- * Initialize master decompression control and select active modules.
- * This is performed at the start of jpeg_start_decompress.
- */
-
-GLOBAL(void)
-jinit_master_decompress (j_decompress_ptr cinfo)
-{
- my_master_ptr master;
-
- master = (my_master_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_decomp_master));
- cinfo->master = (struct jpeg_decomp_master *) master;
- master->pub.prepare_for_output_pass = prepare_for_output_pass;
- master->pub.finish_output_pass = finish_output_pass;
-
- master->pub.is_dummy_pass = FALSE;
-
- master_selection(cinfo);
-}
diff --git a/libjpegtwrp/jdmerge.c b/libjpegtwrp/jdmerge.c
deleted file mode 100644
index 171fbd3ab..000000000
--- a/libjpegtwrp/jdmerge.c
+++ /dev/null
@@ -1,902 +0,0 @@
-/*
- * jdmerge.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains code for merged upsampling/color conversion.
- *
- * This file combines functions from jdsample.c and jdcolor.c;
- * read those files first to understand what's going on.
- *
- * When the chroma components are to be upsampled by simple replication
- * (ie, box filtering), we can save some work in color conversion by
- * calculating all the output pixels corresponding to a pair of chroma
- * samples at one time. In the conversion equations
- * R = Y + K1 * Cr
- * G = Y + K2 * Cb + K3 * Cr
- * B = Y + K4 * Cb
- * only the Y term varies among the group of pixels corresponding to a pair
- * of chroma samples, so the rest of the terms can be calculated just once.
- * At typical sampling ratios, this eliminates half or three-quarters of the
- * multiplications needed for color conversion.
- *
- * This file currently provides implementations for the following cases:
- * YCbCr => RGB color conversion only.
- * Sampling ratios of 2h1v or 2h2v.
- * No scaling needed at upsample time.
- * Corner-aligned (non-CCIR601) sampling alignment.
- * Other special cases could be added, but in most applications these are
- * the only common cases. (For uncommon cases we fall back on the more
- * general code in jdsample.c and jdcolor.c.)
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-#ifdef UPSAMPLE_MERGING_SUPPORTED
-
-#ifdef ANDROID_RGB
-
-/* Declarations for ordered dithering.
- *
- * We use 4x4 ordered dither array packed into 32 bits. This array is
- * sufficent for dithering RGB_888 to RGB_565.
- */
-
-#define DITHER_MASK 0x3
-#define DITHER_ROTATE(x) (((x)<<24) | (((x)>>8)&0x00FFFFFF))
-static const INT32 dither_matrix[4] = {
- 0x0008020A,
- 0x0C040E06,
- 0x030B0109,
- 0x0F070D05
-};
-
-#endif
-
-/* Private subobject */
-
-typedef struct {
- struct jpeg_upsampler pub; /* public fields */
-
- /* Pointer to routine to do actual upsampling/conversion of one row group */
- JMETHOD(void, upmethod, (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
- JSAMPARRAY output_buf));
-
- /* Private state for YCC->RGB conversion */
- int * Cr_r_tab; /* => table for Cr to R conversion */
- int * Cb_b_tab; /* => table for Cb to B conversion */
- INT32 * Cr_g_tab; /* => table for Cr to G conversion */
- INT32 * Cb_g_tab; /* => table for Cb to G conversion */
-
- /* For 2:1 vertical sampling, we produce two output rows at a time.
- * We need a "spare" row buffer to hold the second output row if the
- * application provides just a one-row buffer; we also use the spare
- * to discard the dummy last row if the image height is odd.
- */
- JSAMPROW spare_row;
- boolean spare_full; /* T if spare buffer is occupied */
-
- JDIMENSION out_row_width; /* samples per output row */
- JDIMENSION rows_to_go; /* counts rows remaining in image */
-} my_upsampler;
-
-typedef my_upsampler * my_upsample_ptr;
-
-#define SCALEBITS 16 /* speediest right-shift on some machines */
-#define ONE_HALF ((INT32) 1 << (SCALEBITS-1))
-#define FIX(x) ((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
-
-
-/*
- * Initialize tables for YCC->RGB colorspace conversion.
- * This is taken directly from jdcolor.c; see that file for more info.
- */
-
-LOCAL(void)
-build_ycc_rgb_table (j_decompress_ptr cinfo)
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
- int i;
- INT32 x;
- SHIFT_TEMPS
-
- upsample->Cr_r_tab = (int *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (MAXJSAMPLE+1) * SIZEOF(int));
- upsample->Cb_b_tab = (int *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (MAXJSAMPLE+1) * SIZEOF(int));
- upsample->Cr_g_tab = (INT32 *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (MAXJSAMPLE+1) * SIZEOF(INT32));
- upsample->Cb_g_tab = (INT32 *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (MAXJSAMPLE+1) * SIZEOF(INT32));
-
- for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
- /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
- /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
- /* Cr=>R value is nearest int to 1.40200 * x */
- upsample->Cr_r_tab[i] = (int)
- RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
- /* Cb=>B value is nearest int to 1.77200 * x */
- upsample->Cb_b_tab[i] = (int)
- RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
- /* Cr=>G value is scaled-up -0.71414 * x */
- upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x;
- /* Cb=>G value is scaled-up -0.34414 * x */
- /* We also add in ONE_HALF so that need not do it in inner loop */
- upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
- }
-}
-
-
-/*
- * Initialize for an upsampling pass.
- */
-
-METHODDEF(void)
-start_pass_merged_upsample (j_decompress_ptr cinfo)
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
-
- /* Mark the spare buffer empty */
- upsample->spare_full = FALSE;
- /* Initialize total-height counter for detecting bottom of image */
- upsample->rows_to_go = cinfo->output_height;
-}
-
-
-/*
- * Control routine to do upsampling (and color conversion).
- *
- * The control routine just handles the row buffering considerations.
- */
-
-METHODDEF(void)
-merged_2v_upsample (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
- JDIMENSION in_row_groups_avail,
- JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
- JDIMENSION out_rows_avail)
-/* 2:1 vertical sampling case: may need a spare row. */
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
- JSAMPROW work_ptrs[2];
- JDIMENSION num_rows; /* number of rows returned to caller */
-
- if (upsample->spare_full) {
- /* If we have a spare row saved from a previous cycle, just return it. */
- JDIMENSION size = upsample->out_row_width;
-#ifdef ANDROID_RGB
- if (cinfo->out_color_space == JCS_RGB_565)
- size = cinfo->output_width*2;
-#endif
- jcopy_sample_rows(& upsample->spare_row, 0, output_buf + *out_row_ctr, 0,
- 1, size);
-
- num_rows = 1;
- upsample->spare_full = FALSE;
- } else {
- /* Figure number of rows to return to caller. */
- num_rows = 2;
- /* Not more than the distance to the end of the image. */
- if (num_rows > upsample->rows_to_go)
- num_rows = upsample->rows_to_go;
- /* And not more than what the client can accept: */
- out_rows_avail -= *out_row_ctr;
- if (num_rows > out_rows_avail)
- num_rows = out_rows_avail;
- /* Create output pointer array for upsampler. */
- work_ptrs[0] = output_buf[*out_row_ctr];
- if (num_rows > 1) {
- work_ptrs[1] = output_buf[*out_row_ctr + 1];
- } else {
- work_ptrs[1] = upsample->spare_row;
- upsample->spare_full = TRUE;
- }
- /* Now do the upsampling. */
- (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, work_ptrs);
- }
-
- /* Adjust counts */
- *out_row_ctr += num_rows;
- upsample->rows_to_go -= num_rows;
- /* When the buffer is emptied, declare this input row group consumed */
- if (! upsample->spare_full)
- (*in_row_group_ctr)++;
-}
-
-
-METHODDEF(void)
-merged_1v_upsample (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
- JDIMENSION in_row_groups_avail,
- JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
- JDIMENSION out_rows_avail)
-/* 1:1 vertical sampling case: much easier, never need a spare row. */
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
-
- /* Just do the upsampling. */
- (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr,
- output_buf + *out_row_ctr);
- /* Adjust counts */
- (*out_row_ctr)++;
- (*in_row_group_ctr)++;
-}
-
-
-/*
- * These are the routines invoked by the control routines to do
- * the actual upsampling/conversion. One row group is processed per call.
- *
- * Note: since we may be writing directly into application-supplied buffers,
- * we have to be honest about the output width; we can't assume the buffer
- * has been rounded up to an even width.
- */
-
-
-/*
- * Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical.
- */
-
-METHODDEF(void)
-h2v1_merged_upsample (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
- JSAMPARRAY output_buf)
-#ifdef ANDROID_JPEG_USE_VENUM
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
- JSAMPROW inptr0, inptr1, inptr2;
- JSAMPROW outptr;
-
- inptr0 = input_buf[0][in_row_group_ctr];
- inptr1 = input_buf[1][in_row_group_ctr];
- inptr2 = input_buf[2][in_row_group_ctr];
- outptr = output_buf[0];
-
-#ifdef ANDROID_RGB
- if (cinfo->out_color_space == JCS_RGBA_8888) {
- yyvup2abgr8888_venum((UINT8*) inptr0,
- (UINT8*) inptr2,
- (UINT8*) inptr1,
- (UINT8*) outptr,
- cinfo->output_width);
- } else
-#endif
- {
- yyvup2bgr888_venum((UINT8*) inptr0,
- (UINT8*) inptr2,
- (UINT8*) inptr1,
- (UINT8*) outptr,
- cinfo->output_width);
- }
-}
-#else
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
- register int y, cred, cgreen, cblue;
- int cb, cr;
- register JSAMPROW outptr;
- JSAMPROW inptr0, inptr1, inptr2;
- JDIMENSION col;
- /* copy these pointers into registers if possible */
- register JSAMPLE * range_limit = cinfo->sample_range_limit;
- int * Crrtab = upsample->Cr_r_tab;
- int * Cbbtab = upsample->Cb_b_tab;
- INT32 * Crgtab = upsample->Cr_g_tab;
- INT32 * Cbgtab = upsample->Cb_g_tab;
- JDIMENSION pixelWidth = RGB_PIXELSIZE;
- SHIFT_TEMPS
-
-#ifdef ANDROID_RGB
- if ((cinfo->out_color_components == 4) &&
- (cinfo->out_color_space == JCS_RGBA_8888))
- pixelWidth = 4; // RGBA pixel size
-#endif /* ANDROID_RGB */
-
- inptr0 = input_buf[0][in_row_group_ctr];
- inptr1 = input_buf[1][in_row_group_ctr];
- inptr2 = input_buf[2][in_row_group_ctr];
- outptr = output_buf[0];
- /* Loop for each pair of output pixels */
- for (col = cinfo->output_width >> 1; col > 0; col--) {
- /* Do the chroma part of the calculation */
- cb = GETJSAMPLE(*inptr1++);
- cr = GETJSAMPLE(*inptr2++);
- cred = Crrtab[cr];
- cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
- cblue = Cbbtab[cb];
- /* Fetch 2 Y values and emit 2 pixels */
- y = GETJSAMPLE(*inptr0++);
- outptr[RGB_RED] = range_limit[y + cred];
- outptr[RGB_GREEN] = range_limit[y + cgreen];
- outptr[RGB_BLUE] = range_limit[y + cblue];
- outptr += pixelWidth;
- y = GETJSAMPLE(*inptr0++);
- outptr[RGB_RED] = range_limit[y + cred];
- outptr[RGB_GREEN] = range_limit[y + cgreen];
- outptr[RGB_BLUE] = range_limit[y + cblue];
- outptr += pixelWidth;
- }
- /* If image width is odd, do the last output column separately */
- if (cinfo->output_width & 1) {
- cb = GETJSAMPLE(*inptr1);
- cr = GETJSAMPLE(*inptr2);
- cred = Crrtab[cr];
- cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
- cblue = Cbbtab[cb];
- y = GETJSAMPLE(*inptr0);
- outptr[RGB_RED] = range_limit[y + cred];
- outptr[RGB_GREEN] = range_limit[y + cgreen];
- outptr[RGB_BLUE] = range_limit[y + cblue];
- }
-}
-#endif /* ANDROID_JPEG_USE_VENUM */
-
-
-#ifdef ANDROID_RGB
-METHODDEF(void)
-h2v1_merged_upsample_565 (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
- JSAMPARRAY output_buf)
-#if defined(ANDROID_JPEG_USE_VENUM)
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
- JSAMPROW inptr0, inptr1, inptr2;
- JSAMPROW outptr;
-
- inptr0 = input_buf[0][in_row_group_ctr];
- inptr1 = input_buf[1][in_row_group_ctr];
- inptr2 = input_buf[2][in_row_group_ctr];
- outptr = output_buf[0];
-
- yyvup2rgb565_venum((UINT8*) inptr0,
- (UINT8*) inptr2,
- (UINT8*) inptr1,
- (UINT8*) outptr,
- cinfo->output_width);
-}
-#else
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
- register int y, cred, cgreen, cblue;
- int cb, cr;
- register JSAMPROW outptr;
- JSAMPROW inptr0, inptr1, inptr2;
- JDIMENSION col;
- /* copy these pointers into registers if possible */
- register JSAMPLE * range_limit = cinfo->sample_range_limit;
- int * Crrtab = upsample->Cr_r_tab;
- int * Cbbtab = upsample->Cb_b_tab;
- INT32 * Crgtab = upsample->Cr_g_tab;
- INT32 * Cbgtab = upsample->Cb_g_tab;
- unsigned int r, g, b;
- INT32 rgb;
- SHIFT_TEMPS
-
- inptr0 = input_buf[0][in_row_group_ctr];
- inptr1 = input_buf[1][in_row_group_ctr];
- inptr2 = input_buf[2][in_row_group_ctr];
- outptr = output_buf[0];
- /* Loop for each pair of output pixels */
- for (col = cinfo->output_width >> 1; col > 0; col--) {
- /* Do the chroma part of the calculation */
- cb = GETJSAMPLE(*inptr1++);
- cr = GETJSAMPLE(*inptr2++);
- cred = Crrtab[cr];
- cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
- cblue = Cbbtab[cb];
- /* Fetch 2 Y values and emit 2 pixels */
- y = GETJSAMPLE(*inptr0++);
- r = range_limit[y + cred];
- g = range_limit[y + cgreen];
- b = range_limit[y + cblue];
- rgb = PACK_SHORT_565(r,g,b);
- y = GETJSAMPLE(*inptr0++);
- r = range_limit[y + cred];
- g = range_limit[y + cgreen];
- b = range_limit[y + cblue];
- rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b));
- WRITE_TWO_PIXELS(outptr, rgb);
- outptr += 4;
- }
- /* If image width is odd, do the last output column separately */
- if (cinfo->output_width & 1) {
- cb = GETJSAMPLE(*inptr1);
- cr = GETJSAMPLE(*inptr2);
- cred = Crrtab[cr];
- cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
- cblue = Cbbtab[cb];
- y = GETJSAMPLE(*inptr0);
- r = range_limit[y + cred];
- g = range_limit[y + cgreen];
- b = range_limit[y + cblue];
- rgb = PACK_SHORT_565(r,g,b);
- *(INT16*)outptr = rgb;
- }
-}
-#endif /* ANDROID_JPEG_USE_VENUM */
-
-
-METHODDEF(void)
-h2v1_merged_upsample_565D (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
- JSAMPARRAY output_buf)
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
- register int y, cred, cgreen, cblue;
- int cb, cr;
- register JSAMPROW outptr;
- JSAMPROW inptr0, inptr1, inptr2;
- JDIMENSION col;
- /* copy these pointers into registers if possible */
- register JSAMPLE * range_limit = cinfo->sample_range_limit;
- int * Crrtab = upsample->Cr_r_tab;
- int * Cbbtab = upsample->Cb_b_tab;
- INT32 * Crgtab = upsample->Cr_g_tab;
- INT32 * Cbgtab = upsample->Cb_g_tab;
- JDIMENSION col_index = 0;
- INT32 d0 = dither_matrix[cinfo->output_scanline & DITHER_MASK];
- unsigned int r, g, b;
- INT32 rgb;
- SHIFT_TEMPS
-
- inptr0 = input_buf[0][in_row_group_ctr];
- inptr1 = input_buf[1][in_row_group_ctr];
- inptr2 = input_buf[2][in_row_group_ctr];
- outptr = output_buf[0];
- /* Loop for each pair of output pixels */
- for (col = cinfo->output_width >> 1; col > 0; col--) {
- /* Do the chroma part of the calculation */
- cb = GETJSAMPLE(*inptr1++);
- cr = GETJSAMPLE(*inptr2++);
- cred = Crrtab[cr];
- cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
- cblue = Cbbtab[cb];
- /* Fetch 2 Y values and emit 2 pixels */
- y = GETJSAMPLE(*inptr0++);
- r = range_limit[DITHER_565_R(y + cred, d0)];
- g = range_limit[DITHER_565_G(y + cgreen, d0)];
- b = range_limit[DITHER_565_B(y + cblue, d0)];
- d0 = DITHER_ROTATE(d0);
- rgb = PACK_SHORT_565(r,g,b);
- y = GETJSAMPLE(*inptr0++);
- r = range_limit[DITHER_565_R(y + cred, d0)];
- g = range_limit[DITHER_565_G(y + cgreen, d0)];
- b = range_limit[DITHER_565_B(y + cblue, d0)];
- d0 = DITHER_ROTATE(d0);
- rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b));
- WRITE_TWO_PIXELS(outptr, rgb);
- outptr += 4;
- }
- /* If image width is odd, do the last output column separately */
- if (cinfo->output_width & 1) {
- cb = GETJSAMPLE(*inptr1);
- cr = GETJSAMPLE(*inptr2);
- cred = Crrtab[cr];
- cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
- cblue = Cbbtab[cb];
- y = GETJSAMPLE(*inptr0);
- r = range_limit[DITHER_565_R(y + cred, d0)];
- g = range_limit[DITHER_565_G(y + cgreen, d0)];
- b = range_limit[DITHER_565_B(y + cblue, d0)];
- rgb = PACK_SHORT_565(r,g,b);
- *(INT16*)outptr = rgb;
- }
-}
-
-
-#endif
-
-/*
- * Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical.
- */
-
-METHODDEF(void)
-h2v2_merged_upsample (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
- JSAMPARRAY output_buf)
-#ifdef ANDROID_JPEG_USE_VENUM
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
- JSAMPROW outptr0, outptr1;
- JSAMPROW inptr00, inptr01, inptr1, inptr2;
- inptr00 = input_buf[0][in_row_group_ctr*2];
- inptr01 = input_buf[0][in_row_group_ctr*2 + 1];
- inptr1 = input_buf[1][in_row_group_ctr];
- inptr2 = input_buf[2][in_row_group_ctr];
- outptr0 = output_buf[0];
- outptr1 = output_buf[1];
-#ifdef ANDROID_RGB
- if (cinfo->out_color_space == JCS_RGBA_8888) {
- yyvup2abgr8888_venum((UINT8*) inptr00,
- (UINT8*) inptr2,
- (UINT8*) inptr1,
- (UINT8*) outptr0,
- cinfo->output_width);
- yyvup2abgr8888_venum((UINT8*) inptr01,
- (UINT8*) inptr2,
- (UINT8*) inptr1,
- (UINT8*) outptr1,
- cinfo->output_width);
- } else
-#endif
- {
- yyvup2bgr888_venum((UINT8*) inptr00,
- (UINT8*) inptr2,
- (UINT8*) inptr1,
- (UINT8*) outptr0,
- cinfo->output_width);
-
- yyvup2bgr888_venum((UINT8*) inptr01,
- (UINT8*) inptr2,
- (UINT8*) inptr1,
- (UINT8*) outptr1,
- cinfo->output_width);
- }
-}
-#else
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
- register int y, cred, cgreen, cblue;
- int cb, cr;
- register JSAMPROW outptr0, outptr1;
- JSAMPROW inptr00, inptr01, inptr1, inptr2;
- JDIMENSION col;
- /* copy these pointers into registers if possible */
- register JSAMPLE * range_limit = cinfo->sample_range_limit;
- int * Crrtab = upsample->Cr_r_tab;
- int * Cbbtab = upsample->Cb_b_tab;
- INT32 * Crgtab = upsample->Cr_g_tab;
- INT32 * Cbgtab = upsample->Cb_g_tab;
- JDIMENSION pixelWidth = RGB_PIXELSIZE;
- SHIFT_TEMPS
-
-#ifdef ANDROID_RGB
- if ((cinfo->out_color_components == 4) &&
- (cinfo->out_color_space == JCS_RGBA_8888))
- pixelWidth = 4; // RGBA pixel size
-#endif /* ANDROID_RGB */
-
- inptr00 = input_buf[0][in_row_group_ctr*2];
- inptr01 = input_buf[0][in_row_group_ctr*2 + 1];
- inptr1 = input_buf[1][in_row_group_ctr];
- inptr2 = input_buf[2][in_row_group_ctr];
- outptr0 = output_buf[0];
- outptr1 = output_buf[1];
- /* Loop for each group of output pixels */
- for (col = cinfo->output_width >> 1; col > 0; col--) {
- /* Do the chroma part of the calculation */
- cb = GETJSAMPLE(*inptr1++);
- cr = GETJSAMPLE(*inptr2++);
- cred = Crrtab[cr];
- cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
- cblue = Cbbtab[cb];
- /* Fetch 4 Y values and emit 4 pixels */
- y = GETJSAMPLE(*inptr00++);
- outptr0[RGB_RED] = range_limit[y + cred];
- outptr0[RGB_GREEN] = range_limit[y + cgreen];
- outptr0[RGB_BLUE] = range_limit[y + cblue];
- outptr0 += pixelWidth;
- y = GETJSAMPLE(*inptr00++);
- outptr0[RGB_RED] = range_limit[y + cred];
- outptr0[RGB_GREEN] = range_limit[y + cgreen];
- outptr0[RGB_BLUE] = range_limit[y + cblue];
- outptr0 += pixelWidth;
- y = GETJSAMPLE(*inptr01++);
- outptr1[RGB_RED] = range_limit[y + cred];
- outptr1[RGB_GREEN] = range_limit[y + cgreen];
- outptr1[RGB_BLUE] = range_limit[y + cblue];
- outptr1 += pixelWidth;
- y = GETJSAMPLE(*inptr01++);
- outptr1[RGB_RED] = range_limit[y + cred];
- outptr1[RGB_GREEN] = range_limit[y + cgreen];
- outptr1[RGB_BLUE] = range_limit[y + cblue];
- outptr1 += pixelWidth;
- }
- /* If image width is odd, do the last output column separately */
- if (cinfo->output_width & 1) {
- cb = GETJSAMPLE(*inptr1);
- cr = GETJSAMPLE(*inptr2);
- cred = Crrtab[cr];
- cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
- cblue = Cbbtab[cb];
- y = GETJSAMPLE(*inptr00);
- outptr0[RGB_RED] = range_limit[y + cred];
- outptr0[RGB_GREEN] = range_limit[y + cgreen];
- outptr0[RGB_BLUE] = range_limit[y + cblue];
- y = GETJSAMPLE(*inptr01);
- outptr1[RGB_RED] = range_limit[y + cred];
- outptr1[RGB_GREEN] = range_limit[y + cgreen];
- outptr1[RGB_BLUE] = range_limit[y + cblue];
- }
-}
-#endif /* ANDROID_JPEG_USE_VENUM */
-
-
-#ifdef ANDROID_RGB
-
-METHODDEF(void)
-h2v2_merged_upsample_565 (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
- JSAMPARRAY output_buf)
-#if defined(ANDROID_JPEG_USE_VENUM)
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
- JSAMPROW outptr0, outptr1;
- JSAMPROW inptr00, inptr01, inptr1, inptr2;
- inptr00 = input_buf[0][in_row_group_ctr*2];
- inptr01 = input_buf[0][in_row_group_ctr*2 + 1];
- inptr1 = input_buf[1][in_row_group_ctr];
- inptr2 = input_buf[2][in_row_group_ctr];
- outptr0 = output_buf[0];
- outptr1 = output_buf[1];
-
- yyvup2rgb565_venum((UINT8*) inptr00,
- (UINT8*) inptr2,
- (UINT8*) inptr1,
- (UINT8*) outptr0,
- cinfo->output_width);
-
- yyvup2rgb565_venum((UINT8*) inptr01,
- (UINT8*) inptr2,
- (UINT8*) inptr1,
- (UINT8*) outptr1,
- cinfo->output_width);
-}
-#else
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
- register int y, cred, cgreen, cblue;
- int cb, cr;
- register JSAMPROW outptr0, outptr1;
- JSAMPROW inptr00, inptr01, inptr1, inptr2;
- JDIMENSION col;
- /* copy these pointers into registers if possible */
- register JSAMPLE * range_limit = cinfo->sample_range_limit;
- int * Crrtab = upsample->Cr_r_tab;
- int * Cbbtab = upsample->Cb_b_tab;
- INT32 * Crgtab = upsample->Cr_g_tab;
- INT32 * Cbgtab = upsample->Cb_g_tab;
- unsigned int r, g, b;
- INT32 rgb;
- SHIFT_TEMPS
-
- inptr00 = input_buf[0][in_row_group_ctr*2];
- inptr01 = input_buf[0][in_row_group_ctr*2 + 1];
- inptr1 = input_buf[1][in_row_group_ctr];
- inptr2 = input_buf[2][in_row_group_ctr];
- outptr0 = output_buf[0];
- outptr1 = output_buf[1];
- /* Loop for each group of output pixels */
- for (col = cinfo->output_width >> 1; col > 0; col--) {
- /* Do the chroma part of the calculation */
- cb = GETJSAMPLE(*inptr1++);
- cr = GETJSAMPLE(*inptr2++);
- cred = Crrtab[cr];
- cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
- cblue = Cbbtab[cb];
- /* Fetch 4 Y values and emit 4 pixels */
- y = GETJSAMPLE(*inptr00++);
- r = range_limit[y + cred];
- g = range_limit[y + cgreen];
- b = range_limit[y + cblue];
- rgb = PACK_SHORT_565(r,g,b);
- y = GETJSAMPLE(*inptr00++);
- r = range_limit[y + cred];
- g = range_limit[y + cgreen];
- b = range_limit[y + cblue];
- rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b));
- WRITE_TWO_PIXELS(outptr0, rgb);
- outptr0 += 4;
- y = GETJSAMPLE(*inptr01++);
- r = range_limit[y + cred];
- g = range_limit[y + cgreen];
- b = range_limit[y + cblue];
- rgb = PACK_SHORT_565(r,g,b);
- y = GETJSAMPLE(*inptr01++);
- r = range_limit[y + cred];
- g = range_limit[y + cgreen];
- b = range_limit[y + cblue];
- rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b));
- WRITE_TWO_PIXELS(outptr1, rgb);
- outptr1 += 4;
- }
- /* If image width is odd, do the last output column separately */
- if (cinfo->output_width & 1) {
- cb = GETJSAMPLE(*inptr1);
- cr = GETJSAMPLE(*inptr2);
- cred = Crrtab[cr];
- cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
- cblue = Cbbtab[cb];
- y = GETJSAMPLE(*inptr00);
- r = range_limit[y + cred];
- g = range_limit[y + cgreen];
- b = range_limit[y + cblue];
- rgb = PACK_SHORT_565(r,g,b);
- *(INT16*)outptr0 = rgb;
- y = GETJSAMPLE(*inptr01);
- r = range_limit[y + cred];
- g = range_limit[y + cgreen];
- b = range_limit[y + cblue];
- rgb = PACK_SHORT_565(r,g,b);
- *(INT16*)outptr1 = rgb;
- }
-}
-#endif /* ANDROID_JPEG_USE_VENUM */
-
-
-METHODDEF(void)
-h2v2_merged_upsample_565D (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
- JSAMPARRAY output_buf)
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
- register int y, cred, cgreen, cblue;
- int cb, cr;
- register JSAMPROW outptr0, outptr1;
- JSAMPROW inptr00, inptr01, inptr1, inptr2;
- JDIMENSION col;
- /* copy these pointers into registers if possible */
- register JSAMPLE * range_limit = cinfo->sample_range_limit;
- int * Crrtab = upsample->Cr_r_tab;
- int * Cbbtab = upsample->Cb_b_tab;
- INT32 * Crgtab = upsample->Cr_g_tab;
- INT32 * Cbgtab = upsample->Cb_g_tab;
- JDIMENSION col_index = 0;
- INT32 d0 = dither_matrix[cinfo->output_scanline & DITHER_MASK];
- INT32 d1 = dither_matrix[(cinfo->output_scanline+1) & DITHER_MASK];
- unsigned int r, g, b;
- INT32 rgb;
- SHIFT_TEMPS
-
- inptr00 = input_buf[0][in_row_group_ctr*2];
- inptr01 = input_buf[0][in_row_group_ctr*2 + 1];
- inptr1 = input_buf[1][in_row_group_ctr];
- inptr2 = input_buf[2][in_row_group_ctr];
- outptr0 = output_buf[0];
- outptr1 = output_buf[1];
- /* Loop for each group of output pixels */
- for (col = cinfo->output_width >> 1; col > 0; col--) {
-
- /* Do the chroma part of the calculation */
- cb = GETJSAMPLE(*inptr1++);
- cr = GETJSAMPLE(*inptr2++);
- cred = Crrtab[cr];
- cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
- cblue = Cbbtab[cb];
- /* Fetch 4 Y values and emit 4 pixels */
- y = GETJSAMPLE(*inptr00++);
- r = range_limit[DITHER_565_R(y + cred, d0)];
- g = range_limit[DITHER_565_G(y + cgreen, d0)];
- b = range_limit[DITHER_565_B(y + cblue, d0)];
- d0 = DITHER_ROTATE(d0);
- rgb = PACK_SHORT_565(r,g,b);
- y = GETJSAMPLE(*inptr00++);
- r = range_limit[DITHER_565_R(y + cred, d1)];
- g = range_limit[DITHER_565_G(y + cgreen, d1)];
- b = range_limit[DITHER_565_B(y + cblue, d1)];
- d1 = DITHER_ROTATE(d1);
- rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b));
- WRITE_TWO_PIXELS(outptr0, rgb);
- outptr0 += 4;
- y = GETJSAMPLE(*inptr01++);
- r = range_limit[DITHER_565_R(y + cred, d0)];
- g = range_limit[DITHER_565_G(y + cgreen, d0)];
- b = range_limit[DITHER_565_B(y + cblue, d0)];
- d0 = DITHER_ROTATE(d0);
- rgb = PACK_SHORT_565(r,g,b);
- y = GETJSAMPLE(*inptr01++);
- r = range_limit[DITHER_565_R(y + cred, d1)];
- g = range_limit[DITHER_565_G(y + cgreen, d1)];
- b = range_limit[DITHER_565_B(y + cblue, d1)];
- d1 = DITHER_ROTATE(d1);
- rgb = PACK_TWO_PIXELS(rgb, PACK_SHORT_565(r,g,b));
- WRITE_TWO_PIXELS(outptr1, rgb);
- outptr1 += 4;
- }
- /* If image width is odd, do the last output column separately */
- if (cinfo->output_width & 1) {
- cb = GETJSAMPLE(*inptr1);
- cr = GETJSAMPLE(*inptr2);
- cred = Crrtab[cr];
- cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
- cblue = Cbbtab[cb];
- y = GETJSAMPLE(*inptr00);
- r = range_limit[DITHER_565_R(y + cred, d0)];
- g = range_limit[DITHER_565_G(y + cgreen, d0)];
- b = range_limit[DITHER_565_B(y + cblue, d0)];
- rgb = PACK_SHORT_565(r,g,b);
- *(INT16*)outptr0 = rgb;
- y = GETJSAMPLE(*inptr01);
- r = range_limit[DITHER_565_R(y + cred, d1)];
- g = range_limit[DITHER_565_G(y + cgreen, d1)];
- b = range_limit[DITHER_565_B(y + cblue, d1)];
- rgb = PACK_SHORT_565(r,g,b);
- *(INT16*)outptr1 = rgb;
- }
-}
-
-#endif
-
-/*
- * Module initialization routine for merged upsampling/color conversion.
- *
- * NB: this is called under the conditions determined by use_merged_upsample()
- * in jdmaster.c. That routine MUST correspond to the actual capabilities
- * of this module; no safety checks are made here.
- */
-
-GLOBAL(void)
-jinit_merged_upsampler (j_decompress_ptr cinfo)
-{
- my_upsample_ptr upsample;
-
- upsample = (my_upsample_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_upsampler));
- cinfo->upsample = (struct jpeg_upsampler *) upsample;
- upsample->pub.start_pass = start_pass_merged_upsample;
- upsample->pub.need_context_rows = FALSE;
-
- upsample->out_row_width = cinfo->output_width * cinfo->out_color_components;
-
- if (cinfo->max_v_samp_factor == 2) {
- upsample->pub.upsample = merged_2v_upsample;
- upsample->upmethod = h2v2_merged_upsample;
-#ifdef ANDROID_RGB
- if (cinfo->out_color_space == JCS_RGB_565) {
-#if !defined(ANDROID_JPEG_USE_VENUM)
- if (cinfo->dither_mode != JDITHER_NONE) {
- upsample->upmethod = h2v2_merged_upsample_565D;
- } else
-#endif
- {
- /* If VeNum routines are enabled, use h2v2_merged_upsample_565
- * function regardless of dither mode. */
- upsample->upmethod = h2v2_merged_upsample_565;
- }
- }
-#endif
- /* Allocate a spare row buffer */
- upsample->spare_row = (JSAMPROW)
- (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (size_t) (upsample->out_row_width * SIZEOF(JSAMPLE)));
- } else {
- upsample->pub.upsample = merged_1v_upsample;
- upsample->upmethod = h2v1_merged_upsample;
-#ifdef ANDROID_RGB
- if (cinfo->out_color_space == JCS_RGB_565) {
-#ifndef ANDROID_JPEG_USE_VENUM
- if (cinfo->dither_mode != JDITHER_NONE) {
- upsample->upmethod = h2v1_merged_upsample_565D;
- } else
-#endif
- {
- /* If VeNum routines are enabled, use h2v1_merged_upsample_565
- * function regardless of dither mode. */
- upsample->upmethod = h2v1_merged_upsample_565;
- }
- }
-#endif
- /* No spare row needed */
- upsample->spare_row = NULL;
- }
-
-#if !defined(ANDROID_JPEG_USE_VENUM)
- build_ycc_rgb_table(cinfo);
-#endif
-#ifdef NEEDS_ARM_ERRATA_754319_754320
- asm volatile ( "vmov s0,s0\n" );
-#endif
-}
-
-#endif /* UPSAMPLE_MERGING_SUPPORTED */
diff --git a/libjpegtwrp/jdphuff.c b/libjpegtwrp/jdphuff.c
deleted file mode 100644
index 2f856e07b..000000000
--- a/libjpegtwrp/jdphuff.c
+++ /dev/null
@@ -1,770 +0,0 @@
-/*
- * jdphuff.c
- *
- * Copyright (C) 1995-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains Huffman entropy decoding routines for progressive JPEG.
- *
- * Much of the complexity here has to do with supporting input suspension.
- * If the data source module demands suspension, we want to be able to back
- * up to the start of the current MCU. To do this, we copy state variables
- * into local working storage, and update them back to the permanent
- * storage only upon successful completion of an MCU.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdhuff.h" /* Declarations shared with jdhuff.c */
-
-
-#ifdef D_PROGRESSIVE_SUPPORTED
-
-/*
- * Expanded entropy decoder object for progressive Huffman decoding.
- *
- * The savable_state subrecord contains fields that change within an MCU,
- * but must not be updated permanently until we complete the MCU.
- */
-
-typedef struct {
- unsigned int EOBRUN; /* remaining EOBs in EOBRUN */
- int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
-} savable_state;
-
-/* This macro is to work around compilers with missing or broken
- * structure assignment. You'll need to fix this code if you have
- * such a compiler and you change MAX_COMPS_IN_SCAN.
- */
-
-#ifndef NO_STRUCT_ASSIGN
-#define ASSIGN_STATE(dest,src) ((dest) = (src))
-#else
-#if MAX_COMPS_IN_SCAN == 4
-#define ASSIGN_STATE(dest,src) \
- ((dest).EOBRUN = (src).EOBRUN, \
- (dest).last_dc_val[0] = (src).last_dc_val[0], \
- (dest).last_dc_val[1] = (src).last_dc_val[1], \
- (dest).last_dc_val[2] = (src).last_dc_val[2], \
- (dest).last_dc_val[3] = (src).last_dc_val[3])
-#endif
-#endif
-
-
-typedef struct {
- struct jpeg_entropy_decoder pub; /* public fields */
-
- /* These fields are loaded into local variables at start of each MCU.
- * In case of suspension, we exit WITHOUT updating them.
- */
- bitread_perm_state bitstate; /* Bit buffer at start of MCU */
- savable_state saved; /* Other state at start of MCU */
-
- /* These fields are NOT loaded into local working state. */
- unsigned int restarts_to_go; /* MCUs left in this restart interval */
-
- /* Pointers to derived tables (these workspaces have image lifespan) */
- d_derived_tbl * derived_tbls[NUM_HUFF_TBLS];
-
- d_derived_tbl * ac_derived_tbl; /* active table during an AC scan */
-} phuff_entropy_decoder;
-
-typedef phuff_entropy_decoder * phuff_entropy_ptr;
-
-/* Forward declarations */
-METHODDEF(boolean) decode_mcu_DC_first JPP((j_decompress_ptr cinfo,
- JBLOCKROW *MCU_data));
-METHODDEF(boolean) decode_mcu_AC_first JPP((j_decompress_ptr cinfo,
- JBLOCKROW *MCU_data));
-METHODDEF(boolean) decode_mcu_DC_refine JPP((j_decompress_ptr cinfo,
- JBLOCKROW *MCU_data));
-METHODDEF(boolean) decode_mcu_AC_refine JPP((j_decompress_ptr cinfo,
- JBLOCKROW *MCU_data));
-
-/*
- * Initialize for a Huffman-compressed scan.
- */
-
-METHODDEF(void)
-start_pass_phuff_decoder (j_decompress_ptr cinfo)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
- boolean is_DC_band, bad;
- int ci, coefi, tbl;
- int *coef_bit_ptr;
- jpeg_component_info * compptr;
-
- is_DC_band = (cinfo->Ss == 0);
-
- /* Validate scan parameters */
- bad = FALSE;
- if (is_DC_band) {
- if (cinfo->Se != 0)
- bad = TRUE;
- } else {
- /* need not check Ss/Se < 0 since they came from unsigned bytes */
- if (cinfo->Ss > cinfo->Se || cinfo->Se >= DCTSIZE2)
- bad = TRUE;
- /* AC scans may have only one component */
- if (cinfo->comps_in_scan != 1)
- bad = TRUE;
- }
- if (cinfo->Ah != 0) {
- /* Successive approximation refinement scan: must have Al = Ah-1. */
- if (cinfo->Al != cinfo->Ah-1)
- bad = TRUE;
- }
- if (cinfo->Al > 13) /* need not check for < 0 */
- bad = TRUE;
- /* Arguably the maximum Al value should be less than 13 for 8-bit precision,
- * but the spec doesn't say so, and we try to be liberal about what we
- * accept. Note: large Al values could result in out-of-range DC
- * coefficients during early scans, leading to bizarre displays due to
- * overflows in the IDCT math. But we won't crash.
- */
- if (bad)
- ERREXIT4(cinfo, JERR_BAD_PROGRESSION,
- cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al);
- /* Update progression status, and verify that scan order is legal.
- * Note that inter-scan inconsistencies are treated as warnings
- * not fatal errors ... not clear if this is right way to behave.
- */
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- int cindex = cinfo->cur_comp_info[ci]->component_index;
- coef_bit_ptr = & cinfo->coef_bits[cindex][0];
- if (!is_DC_band && coef_bit_ptr[0] < 0) /* AC without prior DC scan */
- WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0);
- for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) {
- int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi];
- if (cinfo->Ah != expected)
- WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi);
- coef_bit_ptr[coefi] = cinfo->Al;
- }
- }
-
- /* Select MCU decoding routine */
- if (cinfo->Ah == 0) {
- if (is_DC_band)
- entropy->pub.decode_mcu = decode_mcu_DC_first;
- else
- entropy->pub.decode_mcu = decode_mcu_AC_first;
- } else {
- if (is_DC_band)
- entropy->pub.decode_mcu = decode_mcu_DC_refine;
- else
- entropy->pub.decode_mcu = decode_mcu_AC_refine;
- }
-
- for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
- compptr = cinfo->cur_comp_info[ci];
- /* Make sure requested tables are present, and compute derived tables.
- * We may build same derived table more than once, but it's not expensive.
- */
- if (is_DC_band) {
- if (cinfo->Ah == 0) { /* DC refinement needs no table */
- tbl = compptr->dc_tbl_no;
- jpeg_make_d_derived_tbl(cinfo, TRUE, tbl,
- & entropy->derived_tbls[tbl]);
- }
- } else {
- tbl = compptr->ac_tbl_no;
- jpeg_make_d_derived_tbl(cinfo, FALSE, tbl,
- & entropy->derived_tbls[tbl]);
- /* remember the single active table */
- entropy->ac_derived_tbl = entropy->derived_tbls[tbl];
- }
- /* Initialize DC predictions to 0 */
- entropy->saved.last_dc_val[ci] = 0;
- }
-
- /* Initialize bitread state variables */
- entropy->bitstate.bits_left = 0;
- entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */
- entropy->pub.insufficient_data = FALSE;
-
- /* Initialize private state variables */
- entropy->saved.EOBRUN = 0;
-
- /* Initialize restart counter */
- entropy->restarts_to_go = cinfo->restart_interval;
-}
-
-
-/*
- * Figure F.12: extend sign bit.
- * On some machines, a shift and add will be faster than a table lookup.
- */
-
-#ifdef AVOID_TABLES
-
-#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x))
-
-#else
-
-#define HUFF_EXTEND(x,s) ((x) < extend_test[s] ? (x) + extend_offset[s] : (x))
-
-static const int extend_test[16] = /* entry n is 2**(n-1) */
- { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080,
- 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 };
-
-static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */
- { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1,
- ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1,
- ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1,
- ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 };
-
-#endif /* AVOID_TABLES */
-
-
-/*
- * Check for a restart marker & resynchronize decoder.
- * Returns FALSE if must suspend.
- */
-
-LOCAL(boolean)
-process_restart (j_decompress_ptr cinfo)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
- int ci;
-
- /* Throw away any unused bits remaining in bit buffer; */
- /* include any full bytes in next_marker's count of discarded bytes */
- cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8;
- entropy->bitstate.bits_left = 0;
-
- /* Advance past the RSTn marker */
- if (! (*cinfo->marker->read_restart_marker) (cinfo))
- return FALSE;
-
- /* Re-initialize DC predictions to 0 */
- for (ci = 0; ci < cinfo->comps_in_scan; ci++)
- entropy->saved.last_dc_val[ci] = 0;
- /* Re-init EOB run count, too */
- entropy->saved.EOBRUN = 0;
-
- /* Reset restart counter */
- entropy->restarts_to_go = cinfo->restart_interval;
-
- /* Reset out-of-data flag, unless read_restart_marker left us smack up
- * against a marker. In that case we will end up treating the next data
- * segment as empty, and we can avoid producing bogus output pixels by
- * leaving the flag set.
- */
- if (cinfo->unread_marker == 0)
- entropy->pub.insufficient_data = FALSE;
-
- return TRUE;
-}
-
-
-/*
- * Huffman MCU decoding.
- * Each of these routines decodes and returns one MCU's worth of
- * Huffman-compressed coefficients.
- * The coefficients are reordered from zigzag order into natural array order,
- * but are not dequantized.
- *
- * The i'th block of the MCU is stored into the block pointed to by
- * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER.
- *
- * We return FALSE if data source requested suspension. In that case no
- * changes have been made to permanent state. (Exception: some output
- * coefficients may already have been assigned. This is harmless for
- * spectral selection, since we'll just re-assign them on the next call.
- * Successive approximation AC refinement has to be more careful, however.)
- */
-
-/*
- * MCU decoding for DC initial scan (either spectral selection,
- * or first pass of successive approximation).
- */
-
-METHODDEF(boolean)
-decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
- int Al = cinfo->Al;
- register int s, r;
- int blkn, ci;
- JBLOCKROW block;
- BITREAD_STATE_VARS;
- savable_state state;
- d_derived_tbl * tbl;
- jpeg_component_info * compptr;
-
- /* Process restart marker if needed; may have to suspend */
- if (cinfo->restart_interval) {
- if (entropy->restarts_to_go == 0)
- if (! process_restart(cinfo))
- return FALSE;
- }
-
- /* If we've run out of data, just leave the MCU set to zeroes.
- * This way, we return uniform gray for the remainder of the segment.
- */
- if (! entropy->pub.insufficient_data) {
-
- /* Load up working state */
- BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
- ASSIGN_STATE(state, entropy->saved);
-
- /* Outer loop handles each block in the MCU */
-
- for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
- block = MCU_data[blkn];
- ci = cinfo->MCU_membership[blkn];
- compptr = cinfo->cur_comp_info[ci];
- tbl = entropy->derived_tbls[compptr->dc_tbl_no];
-
- /* Decode a single block's worth of coefficients */
-
- /* Section F.2.2.1: decode the DC coefficient difference */
- HUFF_DECODE(s, br_state, tbl, return FALSE, label1);
- if (s) {
- CHECK_BIT_BUFFER(br_state, s, return FALSE);
- r = GET_BITS(s);
- s = HUFF_EXTEND(r, s);
- }
-
- /* Convert DC difference to actual value, update last_dc_val */
- s += state.last_dc_val[ci];
- state.last_dc_val[ci] = s;
- /* Scale and output the coefficient (assumes jpeg_natural_order[0]=0) */
- (*block)[0] = (JCOEF) (s << Al);
- }
-
- /* Completed MCU, so update state */
- BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
- ASSIGN_STATE(entropy->saved, state);
- }
-
- /* Account for restart interval (no-op if not using restarts) */
- entropy->restarts_to_go--;
-
- return TRUE;
-}
-
-
-/*
- * MCU decoding for AC initial scan (either spectral selection,
- * or first pass of successive approximation).
- */
-
-METHODDEF(boolean)
-decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
- int Se = cinfo->Se;
- int Al = cinfo->Al;
- register int s, k, r;
- unsigned int EOBRUN;
- JBLOCKROW block;
- BITREAD_STATE_VARS;
- d_derived_tbl * tbl;
-
- /* Process restart marker if needed; may have to suspend */
- if (cinfo->restart_interval) {
- if (entropy->restarts_to_go == 0)
- if (! process_restart(cinfo))
- return FALSE;
- }
-
- /* If we've run out of data, just leave the MCU set to zeroes.
- * This way, we return uniform gray for the remainder of the segment.
- */
- if (! entropy->pub.insufficient_data) {
-
- /* Load up working state.
- * We can avoid loading/saving bitread state if in an EOB run.
- */
- EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */
-
- /* There is always only one block per MCU */
-
- if (EOBRUN > 0) /* if it's a band of zeroes... */
- EOBRUN--; /* ...process it now (we do nothing) */
- else {
- BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
- block = MCU_data[0];
- tbl = entropy->ac_derived_tbl;
-
- for (k = cinfo->Ss; k <= Se; k++) {
- HUFF_DECODE(s, br_state, tbl, return FALSE, label2);
- r = s >> 4;
- s &= 15;
- if (s) {
- k += r;
- CHECK_BIT_BUFFER(br_state, s, return FALSE);
- r = GET_BITS(s);
- s = HUFF_EXTEND(r, s);
- /* Scale and output coefficient in natural (dezigzagged) order */
- (*block)[jpeg_natural_order[k]] = (JCOEF) (s << Al);
- } else {
- if (r == 15) { /* ZRL */
- k += 15; /* skip 15 zeroes in band */
- } else { /* EOBr, run length is 2^r + appended bits */
- EOBRUN = 1 << r;
- if (r) { /* EOBr, r > 0 */
- CHECK_BIT_BUFFER(br_state, r, return FALSE);
- r = GET_BITS(r);
- EOBRUN += r;
- }
- EOBRUN--; /* this band is processed at this moment */
- break; /* force end-of-band */
- }
- }
- }
-
- BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
- }
-
- /* Completed MCU, so update state */
- entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */
- }
-
- /* Account for restart interval (no-op if not using restarts) */
- entropy->restarts_to_go--;
-
- return TRUE;
-}
-
-
-/*
- * MCU decoding for DC successive approximation refinement scan.
- * Note: we assume such scans can be multi-component, although the spec
- * is not very clear on the point.
- */
-
-METHODDEF(boolean)
-decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
- int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */
- int blkn;
- JBLOCKROW block;
- BITREAD_STATE_VARS;
-
- /* Process restart marker if needed; may have to suspend */
- if (cinfo->restart_interval) {
- if (entropy->restarts_to_go == 0)
- if (! process_restart(cinfo))
- return FALSE;
- }
-
- /* Not worth the cycles to check insufficient_data here,
- * since we will not change the data anyway if we read zeroes.
- */
-
- /* Load up working state */
- BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
-
- /* Outer loop handles each block in the MCU */
-
- for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
- block = MCU_data[blkn];
-
- /* Encoded data is simply the next bit of the two's-complement DC value */
- CHECK_BIT_BUFFER(br_state, 1, return FALSE);
- if (GET_BITS(1))
- (*block)[0] |= p1;
- /* Note: since we use |=, repeating the assignment later is safe */
- }
-
- /* Completed MCU, so update state */
- BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
-
- /* Account for restart interval (no-op if not using restarts) */
- entropy->restarts_to_go--;
-
- return TRUE;
-}
-
-
-/*
- * MCU decoding for AC successive approximation refinement scan.
- */
-
-METHODDEF(boolean)
-decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
- int Se = cinfo->Se;
- int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */
- int m1 = (-1) << cinfo->Al; /* -1 in the bit position being coded */
- register int s, k, r;
- unsigned int EOBRUN;
- JBLOCKROW block;
- JCOEFPTR thiscoef;
- BITREAD_STATE_VARS;
- d_derived_tbl * tbl;
- int num_newnz;
- int newnz_pos[DCTSIZE2];
-
- /* Process restart marker if needed; may have to suspend */
- if (cinfo->restart_interval) {
- if (entropy->restarts_to_go == 0)
- if (! process_restart(cinfo))
- return FALSE;
- }
-
- /* If we've run out of data, don't modify the MCU.
- */
- if (! entropy->pub.insufficient_data) {
-
- /* Load up working state */
- BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
- EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */
-
- /* There is always only one block per MCU */
- block = MCU_data[0];
- tbl = entropy->ac_derived_tbl;
-
- /* If we are forced to suspend, we must undo the assignments to any newly
- * nonzero coefficients in the block, because otherwise we'd get confused
- * next time about which coefficients were already nonzero.
- * But we need not undo addition of bits to already-nonzero coefficients;
- * instead, we can test the current bit to see if we already did it.
- */
- num_newnz = 0;
-
- /* initialize coefficient loop counter to start of band */
- k = cinfo->Ss;
-
- if (EOBRUN == 0) {
- for (; k <= Se; k++) {
- HUFF_DECODE(s, br_state, tbl, goto undoit, label3);
- r = s >> 4;
- s &= 15;
- if (s) {
- if (s != 1) /* size of new coef should always be 1 */
- WARNMS(cinfo, JWRN_HUFF_BAD_CODE);
- CHECK_BIT_BUFFER(br_state, 1, goto undoit);
- if (GET_BITS(1))
- s = p1; /* newly nonzero coef is positive */
- else
- s = m1; /* newly nonzero coef is negative */
- } else {
- if (r != 15) {
- EOBRUN = 1 << r; /* EOBr, run length is 2^r + appended bits */
- if (r) {
- CHECK_BIT_BUFFER(br_state, r, goto undoit);
- r = GET_BITS(r);
- EOBRUN += r;
- }
- break; /* rest of block is handled by EOB logic */
- }
- /* note s = 0 for processing ZRL */
- }
- /* Advance over already-nonzero coefs and r still-zero coefs,
- * appending correction bits to the nonzeroes. A correction bit is 1
- * if the absolute value of the coefficient must be increased.
- */
- do {
- thiscoef = *block + jpeg_natural_order[k];
- if (*thiscoef != 0) {
- CHECK_BIT_BUFFER(br_state, 1, goto undoit);
- if (GET_BITS(1)) {
- if ((*thiscoef & p1) == 0) { /* do nothing if already set it */
- if (*thiscoef >= 0)
- *thiscoef += p1;
- else
- *thiscoef += m1;
- }
- }
- } else {
- if (--r < 0)
- break; /* reached target zero coefficient */
- }
- k++;
- } while (k <= Se);
- if (s) {
- int pos = jpeg_natural_order[k];
- /* Output newly nonzero coefficient */
- (*block)[pos] = (JCOEF) s;
- /* Remember its position in case we have to suspend */
- newnz_pos[num_newnz++] = pos;
- }
- }
- }
-
- if (EOBRUN > 0) {
- /* Scan any remaining coefficient positions after the end-of-band
- * (the last newly nonzero coefficient, if any). Append a correction
- * bit to each already-nonzero coefficient. A correction bit is 1
- * if the absolute value of the coefficient must be increased.
- */
- for (; k <= Se; k++) {
- thiscoef = *block + jpeg_natural_order[k];
- if (*thiscoef != 0) {
- CHECK_BIT_BUFFER(br_state, 1, goto undoit);
- if (GET_BITS(1)) {
- if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */
- if (*thiscoef >= 0)
- *thiscoef += p1;
- else
- *thiscoef += m1;
- }
- }
- }
- }
- /* Count one block completed in EOB run */
- EOBRUN--;
- }
-
- /* Completed MCU, so update state */
- BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
- entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */
- }
-
- /* Account for restart interval (no-op if not using restarts) */
- entropy->restarts_to_go--;
-
- return TRUE;
-
-undoit:
- /* Re-zero any output coefficients that we made newly nonzero */
- while (num_newnz > 0)
- (*block)[newnz_pos[--num_newnz]] = 0;
-
- return FALSE;
-}
-
-/*
- * Save the current Huffman decoder position and the bit buffer
- * into bitstream_offset and get_buffer, respectively.
- */
-GLOBAL(void)
-jpeg_get_huffman_decoder_configuration_progressive(j_decompress_ptr cinfo,
- huffman_offset_data *offset)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-
- if (cinfo->restart_interval) {
- // We are at the end of a data segment
- if (entropy->restarts_to_go == 0)
- if (! process_restart(cinfo))
- return;
- }
-
- // Save restarts_to_go and next_restart_num.
- offset->restarts_to_go = (unsigned short) entropy->restarts_to_go;
- offset->next_restart_num = cinfo->marker->next_restart_num;
-
- offset->bitstream_offset =
- (jget_input_stream_position(cinfo) << LOG_TWO_BIT_BUF_SIZE)
- + entropy->bitstate.bits_left;
-
- offset->get_buffer = entropy->bitstate.get_buffer;
-}
-
-/*
- * Save the current Huffman deocde position and the DC coefficients
- * for each component into bitstream_offset and dc_info[], respectively.
- */
-METHODDEF(void)
-get_huffman_decoder_configuration(j_decompress_ptr cinfo,
- huffman_offset_data *offset)
-{
- int i;
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
- jpeg_get_huffman_decoder_configuration_progressive(cinfo, offset);
- offset->EOBRUN = entropy->saved.EOBRUN;
- for (i = 0; i < cinfo->comps_in_scan; i++)
- offset->prev_dc[i] = entropy->saved.last_dc_val[i];
-}
-
-/*
- * Configure the Huffman decoder reader position and bit buffer.
- */
-GLOBAL(void)
-jpeg_configure_huffman_decoder_progressive(j_decompress_ptr cinfo,
- huffman_offset_data offset)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-
- // Restore restarts_to_go and next_restart_num
- cinfo->unread_marker = 0;
- entropy->restarts_to_go = offset.restarts_to_go;
- cinfo->marker->next_restart_num = offset.next_restart_num;
-
- unsigned int bitstream_offset = offset.bitstream_offset;
- int blkn, i;
-
- unsigned int byte_offset = bitstream_offset >> LOG_TWO_BIT_BUF_SIZE;
- unsigned int bit_in_bit_buffer =
- bitstream_offset & ((1 << LOG_TWO_BIT_BUF_SIZE) - 1);
-
- jset_input_stream_position_bit(cinfo, byte_offset,
- bit_in_bit_buffer, offset.get_buffer);
-}
-
-/*
- * Configure the Huffman decoder to decode the image
- * starting from (iMCU_row_offset, iMCU_col_offset).
- */
-METHODDEF(void)
-configure_huffman_decoder(j_decompress_ptr cinfo, huffman_offset_data offset)
-{
- int i;
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
- jpeg_configure_huffman_decoder_progressive(cinfo, offset);
- entropy->saved.EOBRUN = offset.EOBRUN;
- for (i = 0; i < cinfo->comps_in_scan; i++)
- entropy->saved.last_dc_val[i] = offset.prev_dc[i];
-}
-
-GLOBAL(void)
-jpeg_configure_huffman_index_scan(j_decompress_ptr cinfo,
- huffman_index *index, int scan_no, int offset)
-{
- phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
- if (scan_no >= index->scan_count) {
- index->scan = realloc(index->scan,
- (scan_no + 1) * sizeof(huffman_scan_header));
- index->mem_used += (scan_no - index->scan_count + 1)
- * (sizeof(huffman_scan_header) + cinfo->total_iMCU_rows
- * sizeof(huffman_offset_data*));
- index->scan_count = scan_no + 1;
- }
- index->scan[scan_no].offset = (huffman_offset_data**)malloc(
- cinfo->total_iMCU_rows * sizeof(huffman_offset_data*));
- index->scan[scan_no].bitstream_offset = offset;
-}
-
-/*
- * Module initialization routine for progressive Huffman entropy decoding.
- */
-GLOBAL(void)
-jinit_phuff_decoder (j_decompress_ptr cinfo)
-{
- phuff_entropy_ptr entropy;
- int *coef_bit_ptr;
- int ci, i;
-
- entropy = (phuff_entropy_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(phuff_entropy_decoder));
- cinfo->entropy = (struct jpeg_entropy_decoder *) entropy;
- entropy->pub.start_pass = start_pass_phuff_decoder;
- entropy->pub.configure_huffman_decoder = configure_huffman_decoder;
- entropy->pub.get_huffman_decoder_configuration =
- get_huffman_decoder_configuration;
-
- /* Mark derived tables unallocated */
- for (i = 0; i < NUM_HUFF_TBLS; i++) {
- entropy->derived_tbls[i] = NULL;
- }
-
- /* Create progression status table */
- cinfo->coef_bits = (int (*)[DCTSIZE2])
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- cinfo->num_components*DCTSIZE2*SIZEOF(int));
- coef_bit_ptr = & cinfo->coef_bits[0][0];
- for (ci = 0; ci < cinfo->num_components; ci++)
- for (i = 0; i < DCTSIZE2; i++)
- *coef_bit_ptr++ = -1;
-}
-
-#endif /* D_PROGRESSIVE_SUPPORTED */
diff --git a/libjpegtwrp/jdpostct.c b/libjpegtwrp/jdpostct.c
deleted file mode 100644
index 571563d72..000000000
--- a/libjpegtwrp/jdpostct.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * jdpostct.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains the decompression postprocessing controller.
- * This controller manages the upsampling, color conversion, and color
- * quantization/reduction steps; specifically, it controls the buffering
- * between upsample/color conversion and color quantization/reduction.
- *
- * If no color quantization/reduction is required, then this module has no
- * work to do, and it just hands off to the upsample/color conversion code.
- * An integrated upsample/convert/quantize process would replace this module
- * entirely.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Private buffer controller object */
-
-typedef struct {
- struct jpeg_d_post_controller pub; /* public fields */
-
- /* Color quantization source buffer: this holds output data from
- * the upsample/color conversion step to be passed to the quantizer.
- * For two-pass color quantization, we need a full-image buffer;
- * for one-pass operation, a strip buffer is sufficient.
- */
- jvirt_sarray_ptr whole_image; /* virtual array, or NULL if one-pass */
- JSAMPARRAY buffer; /* strip buffer, or current strip of virtual */
- JDIMENSION strip_height; /* buffer size in rows */
- /* for two-pass mode only: */
- JDIMENSION starting_row; /* row # of first row in current strip */
- JDIMENSION next_row; /* index of next row to fill/empty in strip */
-} my_post_controller;
-
-typedef my_post_controller * my_post_ptr;
-
-
-/* Forward declarations */
-METHODDEF(void) post_process_1pass
- JPP((j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
- JDIMENSION in_row_groups_avail,
- JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
- JDIMENSION out_rows_avail));
-#ifdef QUANT_2PASS_SUPPORTED
-METHODDEF(void) post_process_prepass
- JPP((j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
- JDIMENSION in_row_groups_avail,
- JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
- JDIMENSION out_rows_avail));
-METHODDEF(void) post_process_2pass
- JPP((j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
- JDIMENSION in_row_groups_avail,
- JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
- JDIMENSION out_rows_avail));
-#endif
-
-
-/*
- * Initialize for a processing pass.
- */
-
-METHODDEF(void)
-start_pass_dpost (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)
-{
- my_post_ptr post = (my_post_ptr) cinfo->post;
-
- switch (pass_mode) {
- case JBUF_PASS_THRU:
- if (cinfo->quantize_colors) {
- /* Single-pass processing with color quantization. */
- post->pub.post_process_data = post_process_1pass;
- /* We could be doing buffered-image output before starting a 2-pass
- * color quantization; in that case, jinit_d_post_controller did not
- * allocate a strip buffer. Use the virtual-array buffer as workspace.
- */
- if (post->buffer == NULL) {
- post->buffer = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, post->whole_image,
- (JDIMENSION) 0, post->strip_height, TRUE);
- }
- } else {
- /* For single-pass processing without color quantization,
- * I have no work to do; just call the upsampler directly.
- */
- post->pub.post_process_data = cinfo->upsample->upsample;
- }
- break;
-#ifdef QUANT_2PASS_SUPPORTED
- case JBUF_SAVE_AND_PASS:
- /* First pass of 2-pass quantization */
- if (post->whole_image == NULL)
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
- post->pub.post_process_data = post_process_prepass;
- break;
- case JBUF_CRANK_DEST:
- /* Second pass of 2-pass quantization */
- if (post->whole_image == NULL)
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
- post->pub.post_process_data = post_process_2pass;
- break;
-#endif /* QUANT_2PASS_SUPPORTED */
- default:
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
- break;
- }
- post->starting_row = post->next_row = 0;
-}
-
-
-/*
- * Process some data in the one-pass (strip buffer) case.
- * This is used for color precision reduction as well as one-pass quantization.
- */
-
-METHODDEF(void)
-post_process_1pass (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
- JDIMENSION in_row_groups_avail,
- JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
- JDIMENSION out_rows_avail)
-{
- my_post_ptr post = (my_post_ptr) cinfo->post;
- JDIMENSION num_rows, max_rows;
-
- /* Fill the buffer, but not more than what we can dump out in one go. */
- /* Note we rely on the upsampler to detect bottom of image. */
- max_rows = out_rows_avail - *out_row_ctr;
- if (max_rows > post->strip_height)
- max_rows = post->strip_height;
- num_rows = 0;
- (*cinfo->upsample->upsample) (cinfo,
- input_buf, in_row_group_ctr, in_row_groups_avail,
- post->buffer, &num_rows, max_rows);
- /* Quantize and emit data. */
- (*cinfo->cquantize->color_quantize) (cinfo,
- post->buffer, output_buf + *out_row_ctr, (int) num_rows);
- *out_row_ctr += num_rows;
-}
-
-
-#ifdef QUANT_2PASS_SUPPORTED
-
-/*
- * Process some data in the first pass of 2-pass quantization.
- */
-
-METHODDEF(void)
-post_process_prepass (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
- JDIMENSION in_row_groups_avail,
- JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
- JDIMENSION out_rows_avail)
-{
- my_post_ptr post = (my_post_ptr) cinfo->post;
- JDIMENSION old_next_row, num_rows;
-
- /* Reposition virtual buffer if at start of strip. */
- if (post->next_row == 0) {
- post->buffer = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, post->whole_image,
- post->starting_row, post->strip_height, TRUE);
- }
-
- /* Upsample some data (up to a strip height's worth). */
- old_next_row = post->next_row;
- (*cinfo->upsample->upsample) (cinfo,
- input_buf, in_row_group_ctr, in_row_groups_avail,
- post->buffer, &post->next_row, post->strip_height);
-
- /* Allow quantizer to scan new data. No data is emitted, */
- /* but we advance out_row_ctr so outer loop can tell when we're done. */
- if (post->next_row > old_next_row) {
- num_rows = post->next_row - old_next_row;
- (*cinfo->cquantize->color_quantize) (cinfo, post->buffer + old_next_row,
- (JSAMPARRAY) NULL, (int) num_rows);
- *out_row_ctr += num_rows;
- }
-
- /* Advance if we filled the strip. */
- if (post->next_row >= post->strip_height) {
- post->starting_row += post->strip_height;
- post->next_row = 0;
- }
-}
-
-
-/*
- * Process some data in the second pass of 2-pass quantization.
- */
-
-METHODDEF(void)
-post_process_2pass (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
- JDIMENSION in_row_groups_avail,
- JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
- JDIMENSION out_rows_avail)
-{
- my_post_ptr post = (my_post_ptr) cinfo->post;
- JDIMENSION num_rows, max_rows;
-
- /* Reposition virtual buffer if at start of strip. */
- if (post->next_row == 0) {
- post->buffer = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, post->whole_image,
- post->starting_row, post->strip_height, FALSE);
- }
-
- /* Determine number of rows to emit. */
- num_rows = post->strip_height - post->next_row; /* available in strip */
- max_rows = out_rows_avail - *out_row_ctr; /* available in output area */
- if (num_rows > max_rows)
- num_rows = max_rows;
- /* We have to check bottom of image here, can't depend on upsampler. */
- max_rows = cinfo->output_height - post->starting_row;
- if (num_rows > max_rows)
- num_rows = max_rows;
-
- /* Quantize and emit data. */
- (*cinfo->cquantize->color_quantize) (cinfo,
- post->buffer + post->next_row, output_buf + *out_row_ctr,
- (int) num_rows);
- *out_row_ctr += num_rows;
-
- /* Advance if we filled the strip. */
- post->next_row += num_rows;
- if (post->next_row >= post->strip_height) {
- post->starting_row += post->strip_height;
- post->next_row = 0;
- }
-}
-
-#endif /* QUANT_2PASS_SUPPORTED */
-
-
-/*
- * Initialize postprocessing controller.
- */
-
-GLOBAL(void)
-jinit_d_post_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
-{
- my_post_ptr post;
-
- post = (my_post_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_post_controller));
- cinfo->post = (struct jpeg_d_post_controller *) post;
- post->pub.start_pass = start_pass_dpost;
- post->whole_image = NULL; /* flag for no virtual arrays */
- post->buffer = NULL; /* flag for no strip buffer */
-
- /* Create the quantization buffer, if needed */
- if (cinfo->quantize_colors) {
- /* The buffer strip height is max_v_samp_factor, which is typically
- * an efficient number of rows for upsampling to return.
- * (In the presence of output rescaling, we might want to be smarter?)
- */
- post->strip_height = (JDIMENSION) cinfo->max_v_samp_factor;
- if (need_full_buffer) {
- /* Two-pass color quantization: need full-image storage. */
- /* We round up the number of rows to a multiple of the strip height. */
-#ifdef QUANT_2PASS_SUPPORTED
- post->whole_image = (*cinfo->mem->request_virt_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
- cinfo->output_width * cinfo->out_color_components,
- (JDIMENSION) jround_up((long) cinfo->output_height,
- (long) post->strip_height),
- post->strip_height);
-#else
- ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-#endif /* QUANT_2PASS_SUPPORTED */
- } else {
- /* One-pass color quantization: just make a strip buffer. */
- post->buffer = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- cinfo->output_width * cinfo->out_color_components,
- post->strip_height);
- }
- }
-}
diff --git a/libjpegtwrp/jdsample.c b/libjpegtwrp/jdsample.c
deleted file mode 100644
index 80ffefb2a..000000000
--- a/libjpegtwrp/jdsample.c
+++ /dev/null
@@ -1,478 +0,0 @@
-/*
- * jdsample.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains upsampling routines.
- *
- * Upsampling input data is counted in "row groups". A row group
- * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size)
- * sample rows of each component. Upsampling will normally produce
- * max_v_samp_factor pixel rows from each row group (but this could vary
- * if the upsampler is applying a scale factor of its own).
- *
- * An excellent reference for image resampling is
- * Digital Image Warping, George Wolberg, 1990.
- * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Pointer to routine to upsample a single component */
-typedef JMETHOD(void, upsample1_ptr,
- (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr));
-
-/* Private subobject */
-
-typedef struct {
- struct jpeg_upsampler pub; /* public fields */
-
- /* Color conversion buffer. When using separate upsampling and color
- * conversion steps, this buffer holds one upsampled row group until it
- * has been color converted and output.
- * Note: we do not allocate any storage for component(s) which are full-size,
- * ie do not need rescaling. The corresponding entry of color_buf[] is
- * simply set to point to the input data array, thereby avoiding copying.
- */
- JSAMPARRAY color_buf[MAX_COMPONENTS];
-
- /* Per-component upsampling method pointers */
- upsample1_ptr methods[MAX_COMPONENTS];
-
- int next_row_out; /* counts rows emitted from color_buf */
- JDIMENSION rows_to_go; /* counts rows remaining in image */
-
- /* Height of an input row group for each component. */
- int rowgroup_height[MAX_COMPONENTS];
-
- /* These arrays save pixel expansion factors so that int_expand need not
- * recompute them each time. They are unused for other upsampling methods.
- */
- UINT8 h_expand[MAX_COMPONENTS];
- UINT8 v_expand[MAX_COMPONENTS];
-} my_upsampler;
-
-typedef my_upsampler * my_upsample_ptr;
-
-
-/*
- * Initialize for an upsampling pass.
- */
-
-METHODDEF(void)
-start_pass_upsample (j_decompress_ptr cinfo)
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
-
- /* Mark the conversion buffer empty */
- upsample->next_row_out = cinfo->max_v_samp_factor;
- /* Initialize total-height counter for detecting bottom of image */
- upsample->rows_to_go = cinfo->output_height;
-}
-
-
-/*
- * Control routine to do upsampling (and color conversion).
- *
- * In this version we upsample each component independently.
- * We upsample one row group into the conversion buffer, then apply
- * color conversion a row at a time.
- */
-
-METHODDEF(void)
-sep_upsample (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
- JDIMENSION in_row_groups_avail,
- JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
- JDIMENSION out_rows_avail)
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
- int ci;
- jpeg_component_info * compptr;
- JDIMENSION num_rows;
-
- /* Fill the conversion buffer, if it's empty */
- if (upsample->next_row_out >= cinfo->max_v_samp_factor) {
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- /* Invoke per-component upsample method. Notice we pass a POINTER
- * to color_buf[ci], so that fullsize_upsample can change it.
- */
- (*upsample->methods[ci]) (cinfo, compptr,
- input_buf[ci] + (*in_row_group_ctr * upsample->rowgroup_height[ci]),
- upsample->color_buf + ci);
- }
- upsample->next_row_out = 0;
- }
-
- /* Color-convert and emit rows */
-
- /* How many we have in the buffer: */
- num_rows = (JDIMENSION) (cinfo->max_v_samp_factor - upsample->next_row_out);
- /* Not more than the distance to the end of the image. Need this test
- * in case the image height is not a multiple of max_v_samp_factor:
- */
- if (num_rows > upsample->rows_to_go)
- num_rows = upsample->rows_to_go;
- /* And not more than what the client can accept: */
- out_rows_avail -= *out_row_ctr;
- if (num_rows > out_rows_avail)
- num_rows = out_rows_avail;
-
- (*cinfo->cconvert->color_convert) (cinfo, upsample->color_buf,
- (JDIMENSION) upsample->next_row_out,
- output_buf + *out_row_ctr,
- (int) num_rows);
-
- /* Adjust counts */
- *out_row_ctr += num_rows;
- upsample->rows_to_go -= num_rows;
- upsample->next_row_out += num_rows;
- /* When the buffer is emptied, declare this input row group consumed */
- if (upsample->next_row_out >= cinfo->max_v_samp_factor)
- (*in_row_group_ctr)++;
-}
-
-
-/*
- * These are the routines invoked by sep_upsample to upsample pixel values
- * of a single component. One row group is processed per call.
- */
-
-
-/*
- * For full-size components, we just make color_buf[ci] point at the
- * input buffer, and thus avoid copying any data. Note that this is
- * safe only because sep_upsample doesn't declare the input row group
- * "consumed" until we are done color converting and emitting it.
- */
-
-METHODDEF(void)
-fullsize_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
- *output_data_ptr = input_data;
-}
-
-
-/*
- * This is a no-op version used for "uninteresting" components.
- * These components will not be referenced by color conversion.
- */
-
-METHODDEF(void)
-noop_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
- *output_data_ptr = NULL; /* safety check */
-}
-
-
-/*
- * This version handles any integral sampling ratios.
- * This is not used for typical JPEG files, so it need not be fast.
- * Nor, for that matter, is it particularly accurate: the algorithm is
- * simple replication of the input pixel onto the corresponding output
- * pixels. The hi-falutin sampling literature refers to this as a
- * "box filter". A box filter tends to introduce visible artifacts,
- * so if you are actually going to use 3:1 or 4:1 sampling ratios
- * you would be well advised to improve this code.
- */
-
-METHODDEF(void)
-int_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
- my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
- JSAMPARRAY output_data = *output_data_ptr;
- register JSAMPROW inptr, outptr;
- register JSAMPLE invalue;
- register int h;
- JSAMPROW outend;
- int h_expand, v_expand;
- int inrow, outrow;
-
- h_expand = upsample->h_expand[compptr->component_index];
- v_expand = upsample->v_expand[compptr->component_index];
-
- inrow = outrow = 0;
- while (outrow < cinfo->max_v_samp_factor) {
- /* Generate one output row with proper horizontal expansion */
- inptr = input_data[inrow];
- outptr = output_data[outrow];
- outend = outptr + cinfo->output_width;
- while (outptr < outend) {
- invalue = *inptr++; /* don't need GETJSAMPLE() here */
- for (h = h_expand; h > 0; h--) {
- *outptr++ = invalue;
- }
- }
- /* Generate any additional output rows by duplicating the first one */
- if (v_expand > 1) {
- jcopy_sample_rows(output_data, outrow, output_data, outrow+1,
- v_expand-1, cinfo->output_width);
- }
- inrow++;
- outrow += v_expand;
- }
-}
-
-
-/*
- * Fast processing for the common case of 2:1 horizontal and 1:1 vertical.
- * It's still a box filter.
- */
-
-METHODDEF(void)
-h2v1_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
- JSAMPARRAY output_data = *output_data_ptr;
- register JSAMPROW inptr, outptr;
- register JSAMPLE invalue;
- JSAMPROW outend;
- int inrow;
-
- for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
- inptr = input_data[inrow];
- outptr = output_data[inrow];
- outend = outptr + cinfo->output_width;
- while (outptr < outend) {
- invalue = *inptr++; /* don't need GETJSAMPLE() here */
- *outptr++ = invalue;
- *outptr++ = invalue;
- }
- }
-}
-
-
-/*
- * Fast processing for the common case of 2:1 horizontal and 2:1 vertical.
- * It's still a box filter.
- */
-
-METHODDEF(void)
-h2v2_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
- JSAMPARRAY output_data = *output_data_ptr;
- register JSAMPROW inptr, outptr;
- register JSAMPLE invalue;
- JSAMPROW outend;
- int inrow, outrow;
-
- inrow = outrow = 0;
- while (outrow < cinfo->max_v_samp_factor) {
- inptr = input_data[inrow];
- outptr = output_data[outrow];
- outend = outptr + cinfo->output_width;
- while (outptr < outend) {
- invalue = *inptr++; /* don't need GETJSAMPLE() here */
- *outptr++ = invalue;
- *outptr++ = invalue;
- }
- jcopy_sample_rows(output_data, outrow, output_data, outrow+1,
- 1, cinfo->output_width);
- inrow++;
- outrow += 2;
- }
-}
-
-
-/*
- * Fancy processing for the common case of 2:1 horizontal and 1:1 vertical.
- *
- * The upsampling algorithm is linear interpolation between pixel centers,
- * also known as a "triangle filter". This is a good compromise between
- * speed and visual quality. The centers of the output pixels are 1/4 and 3/4
- * of the way between input pixel centers.
- *
- * A note about the "bias" calculations: when rounding fractional values to
- * integer, we do not want to always round 0.5 up to the next integer.
- * If we did that, we'd introduce a noticeable bias towards larger values.
- * Instead, this code is arranged so that 0.5 will be rounded up or down at
- * alternate pixel locations (a simple ordered dither pattern).
- */
-
-METHODDEF(void)
-h2v1_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
- JSAMPARRAY output_data = *output_data_ptr;
- register JSAMPROW inptr, outptr;
- register int invalue;
- register JDIMENSION colctr;
- int inrow;
-
- for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
- inptr = input_data[inrow];
- outptr = output_data[inrow];
- /* Special case for first column */
- invalue = GETJSAMPLE(*inptr++);
- *outptr++ = (JSAMPLE) invalue;
- *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(*inptr) + 2) >> 2);
-
- for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) {
- /* General case: 3/4 * nearer pixel + 1/4 * further pixel */
- invalue = GETJSAMPLE(*inptr++) * 3;
- *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(inptr[-2]) + 1) >> 2);
- *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(*inptr) + 2) >> 2);
- }
-
- /* Special case for last column */
- invalue = GETJSAMPLE(*inptr);
- *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(inptr[-1]) + 1) >> 2);
- *outptr++ = (JSAMPLE) invalue;
- }
-}
-
-
-/*
- * Fancy processing for the common case of 2:1 horizontal and 2:1 vertical.
- * Again a triangle filter; see comments for h2v1 case, above.
- *
- * It is OK for us to reference the adjacent input rows because we demanded
- * context from the main buffer controller (see initialization code).
- */
-
-METHODDEF(void)
-h2v2_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
- JSAMPARRAY output_data = *output_data_ptr;
- register JSAMPROW inptr0, inptr1, outptr;
-#if BITS_IN_JSAMPLE == 8
- register int thiscolsum, lastcolsum, nextcolsum;
-#else
- register INT32 thiscolsum, lastcolsum, nextcolsum;
-#endif
- register JDIMENSION colctr;
- int inrow, outrow, v;
-
- inrow = outrow = 0;
- while (outrow < cinfo->max_v_samp_factor) {
- for (v = 0; v < 2; v++) {
- /* inptr0 points to nearest input row, inptr1 points to next nearest */
- inptr0 = input_data[inrow];
- if (v == 0) /* next nearest is row above */
- inptr1 = input_data[inrow-1];
- else /* next nearest is row below */
- inptr1 = input_data[inrow+1];
- outptr = output_data[outrow++];
-
- /* Special case for first column */
- thiscolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
- nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
- *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 8) >> 4);
- *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4);
- lastcolsum = thiscolsum; thiscolsum = nextcolsum;
-
- for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) {
- /* General case: 3/4 * nearer pixel + 1/4 * further pixel in each */
- /* dimension, thus 9/16, 3/16, 3/16, 1/16 overall */
- nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
- *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4);
- *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4);
- lastcolsum = thiscolsum; thiscolsum = nextcolsum;
- }
-
- /* Special case for last column */
- *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4);
- *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 7) >> 4);
- }
- inrow++;
- }
-}
-
-
-/*
- * Module initialization routine for upsampling.
- */
-
-GLOBAL(void)
-jinit_upsampler (j_decompress_ptr cinfo)
-{
- my_upsample_ptr upsample;
- int ci;
- jpeg_component_info * compptr;
- boolean need_buffer, do_fancy;
- int h_in_group, v_in_group, h_out_group, v_out_group;
-
- upsample = (my_upsample_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_upsampler));
- cinfo->upsample = (struct jpeg_upsampler *) upsample;
- upsample->pub.start_pass = start_pass_upsample;
- upsample->pub.upsample = sep_upsample;
- upsample->pub.need_context_rows = FALSE; /* until we find out differently */
-
- if (cinfo->CCIR601_sampling) /* this isn't supported */
- ERREXIT(cinfo, JERR_CCIR601_NOTIMPL);
-
- /* jdmainct.c doesn't support context rows when min_DCT_scaled_size = 1,
- * so don't ask for it.
- */
- do_fancy = cinfo->do_fancy_upsampling && cinfo->min_DCT_scaled_size > 1;
-
- /* Verify we can handle the sampling factors, select per-component methods,
- * and create storage as needed.
- */
- for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
- ci++, compptr++) {
- /* Compute size of an "input group" after IDCT scaling. This many samples
- * are to be converted to max_h_samp_factor * max_v_samp_factor pixels.
- */
- h_in_group = (compptr->h_samp_factor * compptr->DCT_scaled_size) /
- cinfo->min_DCT_scaled_size;
- v_in_group = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
- cinfo->min_DCT_scaled_size;
- h_out_group = cinfo->max_h_samp_factor;
- v_out_group = cinfo->max_v_samp_factor;
- upsample->rowgroup_height[ci] = v_in_group; /* save for use later */
- need_buffer = TRUE;
- if (! compptr->component_needed) {
- /* Don't bother to upsample an uninteresting component. */
- upsample->methods[ci] = noop_upsample;
- need_buffer = FALSE;
- } else if (h_in_group == h_out_group && v_in_group == v_out_group) {
- /* Fullsize components can be processed without any work. */
- upsample->methods[ci] = fullsize_upsample;
- need_buffer = FALSE;
- } else if (h_in_group * 2 == h_out_group &&
- v_in_group == v_out_group) {
- /* Special cases for 2h1v upsampling */
- if (do_fancy && compptr->downsampled_width > 2)
- upsample->methods[ci] = h2v1_fancy_upsample;
- else
- upsample->methods[ci] = h2v1_upsample;
- } else if (h_in_group * 2 == h_out_group &&
- v_in_group * 2 == v_out_group) {
- /* Special cases for 2h2v upsampling */
- if (do_fancy && compptr->downsampled_width > 2) {
- upsample->methods[ci] = h2v2_fancy_upsample;
- upsample->pub.need_context_rows = TRUE;
- } else
- upsample->methods[ci] = h2v2_upsample;
- } else if ((h_out_group % h_in_group) == 0 &&
- (v_out_group % v_in_group) == 0) {
- /* Generic integral-factors upsampling method */
- upsample->methods[ci] = int_upsample;
- upsample->h_expand[ci] = (UINT8) (h_out_group / h_in_group);
- upsample->v_expand[ci] = (UINT8) (v_out_group / v_in_group);
- } else
- ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL);
- if (need_buffer) {
- upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (JDIMENSION) jround_up((long) cinfo->output_width,
- (long) cinfo->max_h_samp_factor),
- (JDIMENSION) cinfo->max_v_samp_factor);
- }
- }
-}
diff --git a/libjpegtwrp/jdtrans.c b/libjpegtwrp/jdtrans.c
deleted file mode 100644
index e06e170f4..000000000
--- a/libjpegtwrp/jdtrans.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * jdtrans.c
- *
- * Copyright (C) 1995-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains library routines for transcoding decompression,
- * that is, reading raw DCT coefficient arrays from an input JPEG file.
- * The routines in jdapimin.c will also be needed by a transcoder.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Forward declarations */
-LOCAL(void) transdecode_master_selection JPP((j_decompress_ptr cinfo));
-
-
-/*
- * Read the coefficient arrays from a JPEG file.
- * jpeg_read_header must be completed before calling this.
- *
- * The entire image is read into a set of virtual coefficient-block arrays,
- * one per component. The return value is a pointer to the array of
- * virtual-array descriptors. These can be manipulated directly via the
- * JPEG memory manager, or handed off to jpeg_write_coefficients().
- * To release the memory occupied by the virtual arrays, call
- * jpeg_finish_decompress() when done with the data.
- *
- * An alternative usage is to simply obtain access to the coefficient arrays
- * during a buffered-image-mode decompression operation. This is allowed
- * after any jpeg_finish_output() call. The arrays can be accessed until
- * jpeg_finish_decompress() is called. (Note that any call to the library
- * may reposition the arrays, so don't rely on access_virt_barray() results
- * to stay valid across library calls.)
- *
- * Returns NULL if suspended. This case need be checked only if
- * a suspending data source is used.
- */
-
-GLOBAL(jvirt_barray_ptr *)
-jpeg_read_coefficients (j_decompress_ptr cinfo)
-{
- if (cinfo->global_state == DSTATE_READY) {
- /* First call: initialize active modules */
- transdecode_master_selection(cinfo);
- cinfo->global_state = DSTATE_RDCOEFS;
- }
- if (cinfo->global_state == DSTATE_RDCOEFS) {
- /* Absorb whole file into the coef buffer */
- for (;;) {
- int retcode;
- /* Call progress monitor hook if present */
- if (cinfo->progress != NULL)
- (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
- /* Absorb some more input */
- retcode = (*cinfo->inputctl->consume_input) (cinfo);
- if (retcode == JPEG_SUSPENDED)
- return NULL;
- if (retcode == JPEG_REACHED_EOI)
- break;
- /* Advance progress counter if appropriate */
- if (cinfo->progress != NULL &&
- (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) {
- if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) {
- /* startup underestimated number of scans; ratchet up one scan */
- cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows;
- }
- }
- }
- /* Set state so that jpeg_finish_decompress does the right thing */
- cinfo->global_state = DSTATE_STOPPING;
- }
- /* At this point we should be in state DSTATE_STOPPING if being used
- * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access
- * to the coefficients during a full buffered-image-mode decompression.
- */
- if ((cinfo->global_state == DSTATE_STOPPING ||
- cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) {
- return cinfo->coef->coef_arrays;
- }
- /* Oops, improper usage */
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- return NULL; /* keep compiler happy */
-}
-
-LOCAL(boolean)
-jpeg_build_huffman_index_progressive(j_decompress_ptr cinfo,
- huffman_index *index)
-{
- if (cinfo->global_state == DSTATE_READY) {
- printf("Progressive Mode\n");
- /* First call: initialize active modules */
- transdecode_master_selection(cinfo);
- cinfo->global_state = DSTATE_RDCOEFS;
- }
- if (cinfo->global_state == DSTATE_RDCOEFS) {
- unsigned int mcu;
- int i;
- cinfo->marker->get_sos_marker_position(cinfo, index);
-
- /* Absorb whole file into the coef buffer */
- for (mcu = 0; mcu < cinfo->total_iMCU_rows; mcu++) {
- int retcode = 0;
- /* Call progress monitor hook if present */
- if (cinfo->progress != NULL)
- (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
- /* Absorb some more input */
- jinit_phuff_decoder(cinfo);
- for (i = 0; i < index->scan_count; i++) {
- (*cinfo->inputctl->finish_input_pass) (cinfo);
- jset_input_stream_position(cinfo, index->scan[i].bitstream_offset);
- cinfo->unread_marker = 0;
- retcode = (*cinfo->inputctl->consume_input_build_huffman_index)
- (cinfo, index, i);
- if (retcode == JPEG_REACHED_EOI)
- break;
- cinfo->input_iMCU_row = mcu;
- if (mcu != 0)
- (*cinfo->entropy->configure_huffman_decoder)
- (cinfo, index->scan[i].prev_MCU_offset);
- cinfo->input_scan_number = i;
- retcode = (*cinfo->inputctl->consume_input_build_huffman_index)
- (cinfo, index, i);
- }
- if (retcode == JPEG_SUSPENDED)
- return FALSE;
- if (retcode == JPEG_REACHED_EOI)
- break;
- /* Advance progress counter if appropriate */
- if (cinfo->progress != NULL &&
- (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) {
- if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) {
- /* startup underestimated number of scans; ratchet up one scan */
- cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows;
- }
- }
- }
- cinfo->global_state = DSTATE_STOPPING;
- }
- /* At this point we should be in state DSTATE_STOPPING if being used
- * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access
- * to the coefficients during a full buffered-image-mode decompression.
- */
- if ((cinfo->global_state == DSTATE_STOPPING ||
- cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) {
- return TRUE;
- }
- /* Oops, improper usage */
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- return FALSE; /* keep compiler happy */
-}
-
-LOCAL(boolean)
-jpeg_build_huffman_index_baseline(j_decompress_ptr cinfo, huffman_index *index)
-{
- if (cinfo->global_state == DSTATE_READY) {
- printf("Baseline Mode\n");
- /* First call: initialize active modules */
- transdecode_master_selection(cinfo);
- cinfo->global_state = DSTATE_RDCOEFS;
- }
- if (cinfo->global_state == DSTATE_RDCOEFS) {
- /* Absorb whole file into the coef buffer */
- for (;;) {
- int retcode;
- /* Call progress monitor hook if present */
- if (cinfo->progress != NULL)
- (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
- /* Absorb some more input */
- retcode = (*cinfo->inputctl->consume_input_build_huffman_index)
- (cinfo, index, 0);
- if (retcode == JPEG_SUSPENDED)
- return FALSE;
- if (retcode == JPEG_REACHED_EOI)
- break;
- if (retcode == JPEG_SCAN_COMPLETED)
- break;
-
- /* Advance progress counter if appropriate */
- if (cinfo->progress != NULL &&
- (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) {
- if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) {
- /* startup underestimated number of scans; ratchet up one scan */
- cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows;
- }
- }
- }
- /* Set state so that jpeg_finish_decompress does the right thing */
- cinfo->global_state = DSTATE_STOPPING;
- }
- /* At this point we should be in state DSTATE_STOPPING if being used
- * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access
- * to the coefficients during a full buffered-image-mode decompression.
- */
- if ((cinfo->global_state == DSTATE_STOPPING ||
- cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) {
- return TRUE;
- }
- /* Oops, improper usage */
- ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
- return FALSE; /* keep compiler happy */
-}
-
-GLOBAL(boolean)
-jpeg_build_huffman_index(j_decompress_ptr cinfo, huffman_index *index)
-{
- cinfo->tile_decode = TRUE;
- if (cinfo->progressive_mode)
- return jpeg_build_huffman_index_progressive(cinfo, index);
- else
- return jpeg_build_huffman_index_baseline(cinfo, index);
-}
-
-/*
- * Master selection of decompression modules for transcoding.
- * This substitutes for jdmaster.c's initialization of the full decompressor.
- */
-
-LOCAL(void)
-transdecode_master_selection (j_decompress_ptr cinfo)
-{
- /* This is effectively a buffered-image operation. */
- cinfo->buffered_image = TRUE;
-
- /* Entropy decoding: either Huffman or arithmetic coding. */
- if (cinfo->arith_code) {
- ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
- } else {
- if (cinfo->progressive_mode) {
-#ifdef D_PROGRESSIVE_SUPPORTED
- jinit_phuff_decoder(cinfo);
-#else
- ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
- } else {
- jinit_huff_decoder(cinfo);
- }
- }
-
- /* Always get a full-image coefficient buffer. */
- jinit_d_coef_controller(cinfo, TRUE);
-
- /* We can now tell the memory manager to allocate virtual arrays. */
- (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
-
- /* Initialize input side of decompressor to consume first scan. */
- (*cinfo->inputctl->start_input_pass) (cinfo);
-
- /* Initialize progress monitoring. */
- if (cinfo->progress != NULL) {
- int nscans;
- /* Estimate number of scans to set pass_limit. */
- if (cinfo->progressive_mode) {
- /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */
- nscans = 2 + 3 * cinfo->num_components;
- } else if (cinfo->inputctl->has_multiple_scans) {
- /* For a nonprogressive multiscan file, estimate 1 scan per component. */
- nscans = cinfo->num_components;
- } else {
- nscans = 1;
- }
- cinfo->progress->pass_counter = 0L;
- cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans;
- cinfo->progress->completed_passes = 0;
- cinfo->progress->total_passes = 1;
- }
-}
diff --git a/libjpegtwrp/jerror.c b/libjpegtwrp/jerror.c
deleted file mode 100644
index 3da7be86a..000000000
--- a/libjpegtwrp/jerror.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * jerror.c
- *
- * Copyright (C) 1991-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains simple error-reporting and trace-message routines.
- * These are suitable for Unix-like systems and others where writing to
- * stderr is the right thing to do. Many applications will want to replace
- * some or all of these routines.
- *
- * If you define USE_WINDOWS_MESSAGEBOX in jconfig.h or in the makefile,
- * you get a Windows-specific hack to display error messages in a dialog box.
- * It ain't much, but it beats dropping error messages into the bit bucket,
- * which is what happens to output to stderr under most Windows C compilers.
- *
- * These routines are used by both the compression and decompression code.
- */
-
-/* this is not a core library module, so it doesn't define JPEG_INTERNALS */
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jversion.h"
-#include "jerror.h"
-
-#ifdef USE_WINDOWS_MESSAGEBOX
-#include <windows.h>
-#endif
-
-#ifndef EXIT_FAILURE /* define exit() codes if not provided */
-#define EXIT_FAILURE 1
-#endif
-
-
-/*
- * Create the message string table.
- * We do this from the master message list in jerror.h by re-reading
- * jerror.h with a suitable definition for macro JMESSAGE.
- * The message table is made an external symbol just in case any applications
- * want to refer to it directly.
- */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jpeg_std_message_table jMsgTable
-#endif
-
-#define JMESSAGE(code,string) string ,
-
-const char * const jpeg_std_message_table[] = {
-#include "jerror.h"
- NULL
-};
-
-
-/*
- * Error exit handler: must not return to caller.
- *
- * Applications may override this if they want to get control back after
- * an error. Typically one would longjmp somewhere instead of exiting.
- * The setjmp buffer can be made a private field within an expanded error
- * handler object. Note that the info needed to generate an error message
- * is stored in the error object, so you can generate the message now or
- * later, at your convenience.
- * You should make sure that the JPEG object is cleaned up (with jpeg_abort
- * or jpeg_destroy) at some point.
- */
-
-METHODDEF(void)
-error_exit (j_common_ptr cinfo)
-{
- /* Always display the message */
- (*cinfo->err->output_message) (cinfo);
-
- /* Let the memory manager delete any temp files before we die */
- jpeg_destroy(cinfo);
-
- exit(EXIT_FAILURE);
-}
-
-
-/*
- * Actual output of an error or trace message.
- * Applications may override this method to send JPEG messages somewhere
- * other than stderr.
- *
- * On Windows, printing to stderr is generally completely useless,
- * so we provide optional code to produce an error-dialog popup.
- * Most Windows applications will still prefer to override this routine,
- * but if they don't, it'll do something at least marginally useful.
- *
- * NOTE: to use the library in an environment that doesn't support the
- * C stdio library, you may have to delete the call to fprintf() entirely,
- * not just not use this routine.
- */
-
-METHODDEF(void)
-output_message (j_common_ptr cinfo)
-{
- char buffer[JMSG_LENGTH_MAX];
-
- /* Create the message */
- (*cinfo->err->format_message) (cinfo, buffer);
-
-#ifdef USE_WINDOWS_MESSAGEBOX
- /* Display it in a message dialog box */
- MessageBox(GetActiveWindow(), buffer, "JPEG Library Error",
- MB_OK | MB_ICONERROR);
-#else
- /* Send it to stderr, adding a newline */
- fprintf(stderr, "%s\n", buffer);
-#endif
-}
-
-
-/*
- * Decide whether to emit a trace or warning message.
- * msg_level is one of:
- * -1: recoverable corrupt-data warning, may want to abort.
- * 0: important advisory messages (always display to user).
- * 1: first level of tracing detail.
- * 2,3,...: successively more detailed tracing messages.
- * An application might override this method if it wanted to abort on warnings
- * or change the policy about which messages to display.
- */
-
-METHODDEF(void)
-emit_message (j_common_ptr cinfo, int msg_level)
-{
- struct jpeg_error_mgr * err = cinfo->err;
-
- if (msg_level < 0) {
- /* It's a warning message. Since corrupt files may generate many warnings,
- * the policy implemented here is to show only the first warning,
- * unless trace_level >= 3.
- */
- if (err->num_warnings == 0 || err->trace_level >= 3)
- (*err->output_message) (cinfo);
- /* Always count warnings in num_warnings. */
- err->num_warnings++;
- } else {
- /* It's a trace message. Show it if trace_level >= msg_level. */
- if (err->trace_level >= msg_level)
- (*err->output_message) (cinfo);
- }
-}
-
-
-/*
- * Format a message string for the most recent JPEG error or message.
- * The message is stored into buffer, which should be at least JMSG_LENGTH_MAX
- * characters. Note that no '\n' character is added to the string.
- * Few applications should need to override this method.
- */
-
-METHODDEF(void)
-format_message (j_common_ptr cinfo, char * buffer)
-{
- struct jpeg_error_mgr * err = cinfo->err;
- int msg_code = err->msg_code;
- const char * msgtext = NULL;
- const char * msgptr;
- char ch;
- boolean isstring;
-
- /* Look up message string in proper table */
- if (msg_code > 0 && msg_code <= err->last_jpeg_message) {
- msgtext = err->jpeg_message_table[msg_code];
- } else if (err->addon_message_table != NULL &&
- msg_code >= err->first_addon_message &&
- msg_code <= err->last_addon_message) {
- msgtext = err->addon_message_table[msg_code - err->first_addon_message];
- }
-
- /* Defend against bogus message number */
- if (msgtext == NULL) {
- err->msg_parm.i[0] = msg_code;
- msgtext = err->jpeg_message_table[0];
- }
-
- /* Check for string parameter, as indicated by %s in the message text */
- isstring = FALSE;
- msgptr = msgtext;
- while ((ch = *msgptr++) != '\0') {
- if (ch == '%') {
- if (*msgptr == 's') isstring = TRUE;
- break;
- }
- }
-
- /* Format the message into the passed buffer */
- if (isstring)
- sprintf(buffer, msgtext, err->msg_parm.s);
- else
- sprintf(buffer, msgtext,
- err->msg_parm.i[0], err->msg_parm.i[1],
- err->msg_parm.i[2], err->msg_parm.i[3],
- err->msg_parm.i[4], err->msg_parm.i[5],
- err->msg_parm.i[6], err->msg_parm.i[7]);
-}
-
-
-/*
- * Reset error state variables at start of a new image.
- * This is called during compression startup to reset trace/error
- * processing to default state, without losing any application-specific
- * method pointers. An application might possibly want to override
- * this method if it has additional error processing state.
- */
-
-METHODDEF(void)
-reset_error_mgr (j_common_ptr cinfo)
-{
- cinfo->err->num_warnings = 0;
- /* trace_level is not reset since it is an application-supplied parameter */
- cinfo->err->msg_code = 0; /* may be useful as a flag for "no error" */
-}
-
-
-/*
- * Fill in the standard error-handling methods in a jpeg_error_mgr object.
- * Typical call is:
- * struct jpeg_compress_struct cinfo;
- * struct jpeg_error_mgr err;
- *
- * cinfo.err = jpeg_std_error(&err);
- * after which the application may override some of the methods.
- */
-
-GLOBAL(struct jpeg_error_mgr *)
-jpeg_std_error (struct jpeg_error_mgr * err)
-{
- err->error_exit = error_exit;
- err->emit_message = emit_message;
- err->output_message = output_message;
- err->format_message = format_message;
- err->reset_error_mgr = reset_error_mgr;
-
- err->trace_level = 0; /* default = no tracing */
- err->num_warnings = 0; /* no warnings emitted yet */
- err->msg_code = 0; /* may be useful as a flag for "no error" */
-
- /* Initialize message table pointers */
- err->jpeg_message_table = jpeg_std_message_table;
- err->last_jpeg_message = (int) JMSG_LASTMSGCODE - 1;
-
- err->addon_message_table = NULL;
- err->first_addon_message = 0; /* for safety */
- err->last_addon_message = 0;
-
- return err;
-}
diff --git a/libjpegtwrp/jerror.h b/libjpegtwrp/jerror.h
deleted file mode 100644
index fc2fffeac..000000000
--- a/libjpegtwrp/jerror.h
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * jerror.h
- *
- * Copyright (C) 1994-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file defines the error and message codes for the JPEG library.
- * Edit this file to add new codes, or to translate the message strings to
- * some other language.
- * A set of error-reporting macros are defined too. Some applications using
- * the JPEG library may wish to include this file to get the error codes
- * and/or the macros.
- */
-
-/*
- * To define the enum list of message codes, include this file without
- * defining macro JMESSAGE. To create a message string table, include it
- * again with a suitable JMESSAGE definition (see jerror.c for an example).
- */
-#ifndef JMESSAGE
-#ifndef JERROR_H
-/* First time through, define the enum list */
-#define JMAKE_ENUM_LIST
-#else
-/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */
-#define JMESSAGE(code,string)
-#endif /* JERROR_H */
-#endif /* JMESSAGE */
-
-#ifdef JMAKE_ENUM_LIST
-
-typedef enum {
-
-#define JMESSAGE(code,string) code ,
-
-#endif /* JMAKE_ENUM_LIST */
-
-JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */
-
-/* For maintenance convenience, list is alphabetical by message code name */
-JMESSAGE(JERR_ARITH_NOTIMPL,
- "Sorry, there are legal restrictions on arithmetic coding")
-JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix")
-JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix")
-JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode")
-JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS")
-JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range")
-JMESSAGE(JERR_BAD_DCTSIZE, "IDCT output block size %d not supported")
-JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition")
-JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace")
-JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace")
-JMESSAGE(JERR_BAD_LENGTH, "Bogus marker length")
-JMESSAGE(JERR_BAD_LIB_VERSION,
- "Wrong JPEG library version: library is %d, caller expects %d")
-JMESSAGE(JERR_BAD_MCU_SIZE, "Sampling factors too large for interleaved scan")
-JMESSAGE(JERR_BAD_POOL_ID, "Invalid memory pool code %d")
-JMESSAGE(JERR_BAD_PRECISION, "Unsupported JPEG data precision %d")
-JMESSAGE(JERR_BAD_PROGRESSION,
- "Invalid progressive parameters Ss=%d Se=%d Ah=%d Al=%d")
-JMESSAGE(JERR_BAD_PROG_SCRIPT,
- "Invalid progressive parameters at scan script entry %d")
-JMESSAGE(JERR_BAD_SAMPLING, "Bogus sampling factors")
-JMESSAGE(JERR_BAD_SCAN_SCRIPT, "Invalid scan script at entry %d")
-JMESSAGE(JERR_BAD_STATE, "Improper call to JPEG library in state %d")
-JMESSAGE(JERR_BAD_STRUCT_SIZE,
- "JPEG parameter struct mismatch: library thinks size is %u, caller expects %u")
-JMESSAGE(JERR_BAD_VIRTUAL_ACCESS, "Bogus virtual array access")
-JMESSAGE(JERR_BUFFER_SIZE, "Buffer passed to JPEG library is too small")
-JMESSAGE(JERR_CANT_SUSPEND, "Suspension not allowed here")
-JMESSAGE(JERR_CCIR601_NOTIMPL, "CCIR601 sampling not implemented yet")
-JMESSAGE(JERR_COMPONENT_COUNT, "Too many color components: %d, max %d")
-JMESSAGE(JERR_CONVERSION_NOTIMPL, "Unsupported color conversion request")
-JMESSAGE(JERR_DAC_INDEX, "Bogus DAC index %d")
-JMESSAGE(JERR_DAC_VALUE, "Bogus DAC value 0x%x")
-JMESSAGE(JERR_DHT_INDEX, "Bogus DHT index %d")
-JMESSAGE(JERR_DQT_INDEX, "Bogus DQT index %d")
-JMESSAGE(JERR_EMPTY_IMAGE, "Empty JPEG image (DNL not supported)")
-JMESSAGE(JERR_EMS_READ, "Read from EMS failed")
-JMESSAGE(JERR_EMS_WRITE, "Write to EMS failed")
-JMESSAGE(JERR_EOI_EXPECTED, "Didn't expect more than one scan")
-JMESSAGE(JERR_FILE_READ, "Input file read error")
-JMESSAGE(JERR_FILE_WRITE, "Output file write error --- out of disk space?")
-JMESSAGE(JERR_FRACT_SAMPLE_NOTIMPL, "Fractional sampling not implemented yet")
-JMESSAGE(JERR_HUFF_CLEN_OVERFLOW, "Huffman code size table overflow")
-JMESSAGE(JERR_HUFF_MISSING_CODE, "Missing Huffman code table entry")
-JMESSAGE(JERR_IMAGE_TOO_BIG, "Maximum supported image dimension is %u pixels")
-JMESSAGE(JERR_INPUT_EMPTY, "Empty input file")
-JMESSAGE(JERR_INPUT_EOF, "Premature end of input file")
-JMESSAGE(JERR_MISMATCHED_QUANT_TABLE,
- "Cannot transcode due to multiple use of quantization table %d")
-JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data")
-JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change")
-JMESSAGE(JERR_NOTIMPL, "Not implemented yet")
-JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time")
-JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported")
-JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined")
-JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image")
-JMESSAGE(JERR_NO_QUANT_TABLE, "Quantization table 0x%02x was not defined")
-JMESSAGE(JERR_NO_SOI, "Not a JPEG file: starts with 0x%02x 0x%02x")
-JMESSAGE(JERR_OUT_OF_MEMORY, "Insufficient memory (case %d)")
-JMESSAGE(JERR_QUANT_COMPONENTS,
- "Cannot quantize more than %d color components")
-JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors")
-JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors")
-JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers")
-JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker")
-JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x")
-JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers")
-JMESSAGE(JERR_SOS_NO_SOF, "Invalid JPEG file structure: SOS before SOF")
-JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s")
-JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file")
-JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file")
-JMESSAGE(JERR_TFILE_WRITE,
- "Write failed on temporary file --- out of disk space?")
-JMESSAGE(JERR_TOO_LITTLE_DATA, "Application transferred too few scanlines")
-JMESSAGE(JERR_UNKNOWN_MARKER, "Unsupported marker type 0x%02x")
-JMESSAGE(JERR_VIRTUAL_BUG, "Virtual array controller messed up")
-JMESSAGE(JERR_WIDTH_OVERFLOW, "Image too wide for this implementation")
-JMESSAGE(JERR_XMS_READ, "Read from XMS failed")
-JMESSAGE(JERR_XMS_WRITE, "Write to XMS failed")
-JMESSAGE(JMSG_COPYRIGHT, JCOPYRIGHT)
-JMESSAGE(JMSG_VERSION, JVERSION)
-JMESSAGE(JTRC_16BIT_TABLES,
- "Caution: quantization tables are too coarse for baseline JPEG")
-JMESSAGE(JTRC_ADOBE,
- "Adobe APP14 marker: version %d, flags 0x%04x 0x%04x, transform %d")
-JMESSAGE(JTRC_APP0, "Unknown APP0 marker (not JFIF), length %u")
-JMESSAGE(JTRC_APP14, "Unknown APP14 marker (not Adobe), length %u")
-JMESSAGE(JTRC_DAC, "Define Arithmetic Table 0x%02x: 0x%02x")
-JMESSAGE(JTRC_DHT, "Define Huffman Table 0x%02x")
-JMESSAGE(JTRC_DQT, "Define Quantization Table %d precision %d")
-JMESSAGE(JTRC_DRI, "Define Restart Interval %u")
-JMESSAGE(JTRC_EMS_CLOSE, "Freed EMS handle %u")
-JMESSAGE(JTRC_EMS_OPEN, "Obtained EMS handle %u")
-JMESSAGE(JTRC_EOI, "End Of Image")
-JMESSAGE(JTRC_HUFFBITS, " %3d %3d %3d %3d %3d %3d %3d %3d")
-JMESSAGE(JTRC_JFIF, "JFIF APP0 marker: version %d.%02d, density %dx%d %d")
-JMESSAGE(JTRC_JFIF_BADTHUMBNAILSIZE,
- "Warning: thumbnail image size does not match data length %u")
-JMESSAGE(JTRC_JFIF_EXTENSION,
- "JFIF extension marker: type 0x%02x, length %u")
-JMESSAGE(JTRC_JFIF_THUMBNAIL, " with %d x %d thumbnail image")
-JMESSAGE(JTRC_MISC_MARKER, "Miscellaneous marker 0x%02x, length %u")
-JMESSAGE(JTRC_PARMLESS_MARKER, "Unexpected marker 0x%02x")
-JMESSAGE(JTRC_QUANTVALS, " %4u %4u %4u %4u %4u %4u %4u %4u")
-JMESSAGE(JTRC_QUANT_3_NCOLORS, "Quantizing to %d = %d*%d*%d colors")
-JMESSAGE(JTRC_QUANT_NCOLORS, "Quantizing to %d colors")
-JMESSAGE(JTRC_QUANT_SELECTED, "Selected %d colors for quantization")
-JMESSAGE(JTRC_RECOVERY_ACTION, "At marker 0x%02x, recovery action %d")
-JMESSAGE(JTRC_RST, "RST%d")
-JMESSAGE(JTRC_SMOOTH_NOTIMPL,
- "Smoothing not supported with nonstandard sampling ratios")
-JMESSAGE(JTRC_SOF, "Start Of Frame 0x%02x: width=%u, height=%u, components=%d")
-JMESSAGE(JTRC_SOF_COMPONENT, " Component %d: %dhx%dv q=%d")
-JMESSAGE(JTRC_SOI, "Start of Image")
-JMESSAGE(JTRC_SOS, "Start Of Scan: %d components")
-JMESSAGE(JTRC_SOS_COMPONENT, " Component %d: dc=%d ac=%d")
-JMESSAGE(JTRC_SOS_PARAMS, " Ss=%d, Se=%d, Ah=%d, Al=%d")
-JMESSAGE(JTRC_TFILE_CLOSE, "Closed temporary file %s")
-JMESSAGE(JTRC_TFILE_OPEN, "Opened temporary file %s")
-JMESSAGE(JTRC_THUMB_JPEG,
- "JFIF extension marker: JPEG-compressed thumbnail image, length %u")
-JMESSAGE(JTRC_THUMB_PALETTE,
- "JFIF extension marker: palette thumbnail image, length %u")
-JMESSAGE(JTRC_THUMB_RGB,
- "JFIF extension marker: RGB thumbnail image, length %u")
-JMESSAGE(JTRC_UNKNOWN_IDS,
- "Unrecognized component IDs %d %d %d, assuming YCbCr")
-JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u")
-JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u")
-JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d")
-JMESSAGE(JWRN_BOGUS_PROGRESSION,
- "Inconsistent progression sequence for component %d coefficient %d")
-JMESSAGE(JWRN_EXTRANEOUS_DATA,
- "Corrupt JPEG data: %u extraneous bytes before marker 0x%02x")
-JMESSAGE(JWRN_HIT_MARKER, "Corrupt JPEG data: premature end of data segment")
-JMESSAGE(JWRN_HUFF_BAD_CODE, "Corrupt JPEG data: bad Huffman code")
-JMESSAGE(JWRN_JFIF_MAJOR, "Warning: unknown JFIF revision number %d.%02d")
-JMESSAGE(JWRN_JPEG_EOF, "Premature end of JPEG file")
-JMESSAGE(JWRN_MUST_RESYNC,
- "Corrupt JPEG data: found marker 0x%02x instead of RST%d")
-JMESSAGE(JWRN_NOT_SEQUENTIAL, "Invalid SOS parameters for sequential JPEG")
-JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines")
-
-#ifdef JMAKE_ENUM_LIST
-
- JMSG_LASTMSGCODE
-} J_MESSAGE_CODE;
-
-#undef JMAKE_ENUM_LIST
-#endif /* JMAKE_ENUM_LIST */
-
-/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */
-#undef JMESSAGE
-
-
-#ifndef JERROR_H
-#define JERROR_H
-
-/* Macros to simplify using the error and trace message stuff */
-/* The first parameter is either type of cinfo pointer */
-
-/* Fatal errors (print message and exit) */
-#define ERREXIT(cinfo,code) \
- ((cinfo)->err->msg_code = (code), \
- (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
-#define ERREXIT1(cinfo,code,p1) \
- ((cinfo)->err->msg_code = (code), \
- (cinfo)->err->msg_parm.i[0] = (p1), \
- (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
-#define ERREXIT2(cinfo,code,p1,p2) \
- ((cinfo)->err->msg_code = (code), \
- (cinfo)->err->msg_parm.i[0] = (p1), \
- (cinfo)->err->msg_parm.i[1] = (p2), \
- (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
-#define ERREXIT3(cinfo,code,p1,p2,p3) \
- ((cinfo)->err->msg_code = (code), \
- (cinfo)->err->msg_parm.i[0] = (p1), \
- (cinfo)->err->msg_parm.i[1] = (p2), \
- (cinfo)->err->msg_parm.i[2] = (p3), \
- (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
-#define ERREXIT4(cinfo,code,p1,p2,p3,p4) \
- ((cinfo)->err->msg_code = (code), \
- (cinfo)->err->msg_parm.i[0] = (p1), \
- (cinfo)->err->msg_parm.i[1] = (p2), \
- (cinfo)->err->msg_parm.i[2] = (p3), \
- (cinfo)->err->msg_parm.i[3] = (p4), \
- (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
-#define ERREXITS(cinfo,code,str) \
- ((cinfo)->err->msg_code = (code), \
- strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \
- (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
-
-#define MAKESTMT(stuff) do { stuff } while (0)
-
-/* Nonfatal errors (we can keep going, but the data is probably corrupt) */
-#define WARNMS(cinfo,code) \
- ((cinfo)->err->msg_code = (code), \
- (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1))
-#define WARNMS1(cinfo,code,p1) \
- ((cinfo)->err->msg_code = (code), \
- (cinfo)->err->msg_parm.i[0] = (p1), \
- (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1))
-#define WARNMS2(cinfo,code,p1,p2) \
- ((cinfo)->err->msg_code = (code), \
- (cinfo)->err->msg_parm.i[0] = (p1), \
- (cinfo)->err->msg_parm.i[1] = (p2), \
- (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1))
-
-/* Informational/debugging messages */
-#define TRACEMS(cinfo,lvl,code) \
- ((cinfo)->err->msg_code = (code), \
- (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)))
-#define TRACEMS1(cinfo,lvl,code,p1) \
- ((cinfo)->err->msg_code = (code), \
- (cinfo)->err->msg_parm.i[0] = (p1), \
- (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)))
-#define TRACEMS2(cinfo,lvl,code,p1,p2) \
- ((cinfo)->err->msg_code = (code), \
- (cinfo)->err->msg_parm.i[0] = (p1), \
- (cinfo)->err->msg_parm.i[1] = (p2), \
- (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)))
-#define TRACEMS3(cinfo,lvl,code,p1,p2,p3) \
- MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \
- _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); \
- (cinfo)->err->msg_code = (code); \
- (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); )
-#define TRACEMS4(cinfo,lvl,code,p1,p2,p3,p4) \
- MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \
- _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \
- (cinfo)->err->msg_code = (code); \
- (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); )
-#define TRACEMS5(cinfo,lvl,code,p1,p2,p3,p4,p5) \
- MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \
- _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \
- _mp[4] = (p5); \
- (cinfo)->err->msg_code = (code); \
- (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); )
-#define TRACEMS8(cinfo,lvl,code,p1,p2,p3,p4,p5,p6,p7,p8) \
- MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \
- _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \
- _mp[4] = (p5); _mp[5] = (p6); _mp[6] = (p7); _mp[7] = (p8); \
- (cinfo)->err->msg_code = (code); \
- (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); )
-#define TRACEMSS(cinfo,lvl,code,str) \
- ((cinfo)->err->msg_code = (code), \
- strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \
- (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)))
-
-#endif /* JERROR_H */
diff --git a/libjpegtwrp/jfdctflt.c b/libjpegtwrp/jfdctflt.c
deleted file mode 100644
index 79d7a0078..000000000
--- a/libjpegtwrp/jfdctflt.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * jfdctflt.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a floating-point implementation of the
- * forward DCT (Discrete Cosine Transform).
- *
- * This implementation should be more accurate than either of the integer
- * DCT implementations. However, it may not give the same results on all
- * machines because of differences in roundoff behavior. Speed will depend
- * on the hardware's floating point capacity.
- *
- * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT
- * on each column. Direct algorithms are also available, but they are
- * much more complex and seem not to be any faster when reduced to code.
- *
- * This implementation is based on Arai, Agui, and Nakajima's algorithm for
- * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in
- * Japanese, but the algorithm is described in the Pennebaker & Mitchell
- * JPEG textbook (see REFERENCES section in file README). The following code
- * is based directly on figure 4-8 in P&M.
- * While an 8-point DCT cannot be done in less than 11 multiplies, it is
- * possible to arrange the computation so that many of the multiplies are
- * simple scalings of the final outputs. These multiplies can then be
- * folded into the multiplications or divisions by the JPEG quantization
- * table entries. The AA&N method leaves only 5 multiplies and 29 adds
- * to be done in the DCT itself.
- * The primary disadvantage of this method is that with a fixed-point
- * implementation, accuracy is lost due to imprecise representation of the
- * scaled quantization values. However, that problem does not arise if
- * we use floating point arithmetic.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdct.h" /* Private declarations for DCT subsystem */
-
-#ifdef DCT_FLOAT_SUPPORTED
-
-
-/*
- * This module is specialized to the case DCTSIZE = 8.
- */
-
-#if DCTSIZE != 8
- Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
-#endif
-
-
-/*
- * Perform the forward DCT on one block of samples.
- */
-
-GLOBAL(void)
-jpeg_fdct_float (FAST_FLOAT * data)
-{
- FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
- FAST_FLOAT tmp10, tmp11, tmp12, tmp13;
- FAST_FLOAT z1, z2, z3, z4, z5, z11, z13;
- FAST_FLOAT *dataptr;
- int ctr;
-
- /* Pass 1: process rows. */
-
- dataptr = data;
- for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
- tmp0 = dataptr[0] + dataptr[7];
- tmp7 = dataptr[0] - dataptr[7];
- tmp1 = dataptr[1] + dataptr[6];
- tmp6 = dataptr[1] - dataptr[6];
- tmp2 = dataptr[2] + dataptr[5];
- tmp5 = dataptr[2] - dataptr[5];
- tmp3 = dataptr[3] + dataptr[4];
- tmp4 = dataptr[3] - dataptr[4];
-
- /* Even part */
-
- tmp10 = tmp0 + tmp3; /* phase 2 */
- tmp13 = tmp0 - tmp3;
- tmp11 = tmp1 + tmp2;
- tmp12 = tmp1 - tmp2;
-
- dataptr[0] = tmp10 + tmp11; /* phase 3 */
- dataptr[4] = tmp10 - tmp11;
-
- z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */
- dataptr[2] = tmp13 + z1; /* phase 5 */
- dataptr[6] = tmp13 - z1;
-
- /* Odd part */
-
- tmp10 = tmp4 + tmp5; /* phase 2 */
- tmp11 = tmp5 + tmp6;
- tmp12 = tmp6 + tmp7;
-
- /* The rotator is modified from fig 4-8 to avoid extra negations. */
- z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */
- z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */
- z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */
- z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */
-
- z11 = tmp7 + z3; /* phase 5 */
- z13 = tmp7 - z3;
-
- dataptr[5] = z13 + z2; /* phase 6 */
- dataptr[3] = z13 - z2;
- dataptr[1] = z11 + z4;
- dataptr[7] = z11 - z4;
-
- dataptr += DCTSIZE; /* advance pointer to next row */
- }
-
- /* Pass 2: process columns. */
-
- dataptr = data;
- for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
- tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7];
- tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7];
- tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6];
- tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6];
- tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5];
- tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5];
- tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4];
- tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4];
-
- /* Even part */
-
- tmp10 = tmp0 + tmp3; /* phase 2 */
- tmp13 = tmp0 - tmp3;
- tmp11 = tmp1 + tmp2;
- tmp12 = tmp1 - tmp2;
-
- dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */
- dataptr[DCTSIZE*4] = tmp10 - tmp11;
-
- z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */
- dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */
- dataptr[DCTSIZE*6] = tmp13 - z1;
-
- /* Odd part */
-
- tmp10 = tmp4 + tmp5; /* phase 2 */
- tmp11 = tmp5 + tmp6;
- tmp12 = tmp6 + tmp7;
-
- /* The rotator is modified from fig 4-8 to avoid extra negations. */
- z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */
- z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */
- z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */
- z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */
-
- z11 = tmp7 + z3; /* phase 5 */
- z13 = tmp7 - z3;
-
- dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */
- dataptr[DCTSIZE*3] = z13 - z2;
- dataptr[DCTSIZE*1] = z11 + z4;
- dataptr[DCTSIZE*7] = z11 - z4;
-
- dataptr++; /* advance pointer to next column */
- }
-}
-
-#endif /* DCT_FLOAT_SUPPORTED */
diff --git a/libjpegtwrp/jfdctfst.c b/libjpegtwrp/jfdctfst.c
deleted file mode 100644
index ccb378a3b..000000000
--- a/libjpegtwrp/jfdctfst.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * jfdctfst.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a fast, not so accurate integer implementation of the
- * forward DCT (Discrete Cosine Transform).
- *
- * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT
- * on each column. Direct algorithms are also available, but they are
- * much more complex and seem not to be any faster when reduced to code.
- *
- * This implementation is based on Arai, Agui, and Nakajima's algorithm for
- * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in
- * Japanese, but the algorithm is described in the Pennebaker & Mitchell
- * JPEG textbook (see REFERENCES section in file README). The following code
- * is based directly on figure 4-8 in P&M.
- * While an 8-point DCT cannot be done in less than 11 multiplies, it is
- * possible to arrange the computation so that many of the multiplies are
- * simple scalings of the final outputs. These multiplies can then be
- * folded into the multiplications or divisions by the JPEG quantization
- * table entries. The AA&N method leaves only 5 multiplies and 29 adds
- * to be done in the DCT itself.
- * The primary disadvantage of this method is that with fixed-point math,
- * accuracy is lost due to imprecise representation of the scaled
- * quantization values. The smaller the quantization table entry, the less
- * precise the scaled value, so this implementation does worse with high-
- * quality-setting files than with low-quality ones.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdct.h" /* Private declarations for DCT subsystem */
-
-#ifdef DCT_IFAST_SUPPORTED
-
-
-/*
- * This module is specialized to the case DCTSIZE = 8.
- */
-
-#if DCTSIZE != 8
- Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
-#endif
-
-
-/* Scaling decisions are generally the same as in the LL&M algorithm;
- * see jfdctint.c for more details. However, we choose to descale
- * (right shift) multiplication products as soon as they are formed,
- * rather than carrying additional fractional bits into subsequent additions.
- * This compromises accuracy slightly, but it lets us save a few shifts.
- * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples)
- * everywhere except in the multiplications proper; this saves a good deal
- * of work on 16-bit-int machines.
- *
- * Again to save a few shifts, the intermediate results between pass 1 and
- * pass 2 are not upscaled, but are represented only to integral precision.
- *
- * A final compromise is to represent the multiplicative constants to only
- * 8 fractional bits, rather than 13. This saves some shifting work on some
- * machines, and may also reduce the cost of multiplication (since there
- * are fewer one-bits in the constants).
- */
-
-#define CONST_BITS 8
-
-
-/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
- * causing a lot of useless floating-point operations at run time.
- * To get around this we use the following pre-calculated constants.
- * If you change CONST_BITS you may want to add appropriate values.
- * (With a reasonable C compiler, you can just rely on the FIX() macro...)
- */
-
-#if CONST_BITS == 8
-#define FIX_0_382683433 ((INT32) 98) /* FIX(0.382683433) */
-#define FIX_0_541196100 ((INT32) 139) /* FIX(0.541196100) */
-#define FIX_0_707106781 ((INT32) 181) /* FIX(0.707106781) */
-#define FIX_1_306562965 ((INT32) 334) /* FIX(1.306562965) */
-#else
-#define FIX_0_382683433 FIX(0.382683433)
-#define FIX_0_541196100 FIX(0.541196100)
-#define FIX_0_707106781 FIX(0.707106781)
-#define FIX_1_306562965 FIX(1.306562965)
-#endif
-
-
-/* We can gain a little more speed, with a further compromise in accuracy,
- * by omitting the addition in a descaling shift. This yields an incorrectly
- * rounded result half the time...
- */
-
-#ifndef USE_ACCURATE_ROUNDING
-#undef DESCALE
-#define DESCALE(x,n) RIGHT_SHIFT(x, n)
-#endif
-
-
-/* Multiply a DCTELEM variable by an INT32 constant, and immediately
- * descale to yield a DCTELEM result.
- */
-
-#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS))
-
-
-/*
- * Perform the forward DCT on one block of samples.
- */
-
-GLOBAL(void)
-jpeg_fdct_ifast (DCTELEM * data)
-{
- DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
- DCTELEM tmp10, tmp11, tmp12, tmp13;
- DCTELEM z1, z2, z3, z4, z5, z11, z13;
- DCTELEM *dataptr;
- int ctr;
- SHIFT_TEMPS
-
- /* Pass 1: process rows. */
-
- dataptr = data;
- for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
- tmp0 = dataptr[0] + dataptr[7];
- tmp7 = dataptr[0] - dataptr[7];
- tmp1 = dataptr[1] + dataptr[6];
- tmp6 = dataptr[1] - dataptr[6];
- tmp2 = dataptr[2] + dataptr[5];
- tmp5 = dataptr[2] - dataptr[5];
- tmp3 = dataptr[3] + dataptr[4];
- tmp4 = dataptr[3] - dataptr[4];
-
- /* Even part */
-
- tmp10 = tmp0 + tmp3; /* phase 2 */
- tmp13 = tmp0 - tmp3;
- tmp11 = tmp1 + tmp2;
- tmp12 = tmp1 - tmp2;
-
- dataptr[0] = tmp10 + tmp11; /* phase 3 */
- dataptr[4] = tmp10 - tmp11;
-
- z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */
- dataptr[2] = tmp13 + z1; /* phase 5 */
- dataptr[6] = tmp13 - z1;
-
- /* Odd part */
-
- tmp10 = tmp4 + tmp5; /* phase 2 */
- tmp11 = tmp5 + tmp6;
- tmp12 = tmp6 + tmp7;
-
- /* The rotator is modified from fig 4-8 to avoid extra negations. */
- z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */
- z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */
- z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */
- z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */
-
- z11 = tmp7 + z3; /* phase 5 */
- z13 = tmp7 - z3;
-
- dataptr[5] = z13 + z2; /* phase 6 */
- dataptr[3] = z13 - z2;
- dataptr[1] = z11 + z4;
- dataptr[7] = z11 - z4;
-
- dataptr += DCTSIZE; /* advance pointer to next row */
- }
-
- /* Pass 2: process columns. */
-
- dataptr = data;
- for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
- tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7];
- tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7];
- tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6];
- tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6];
- tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5];
- tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5];
- tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4];
- tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4];
-
- /* Even part */
-
- tmp10 = tmp0 + tmp3; /* phase 2 */
- tmp13 = tmp0 - tmp3;
- tmp11 = tmp1 + tmp2;
- tmp12 = tmp1 - tmp2;
-
- dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */
- dataptr[DCTSIZE*4] = tmp10 - tmp11;
-
- z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */
- dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */
- dataptr[DCTSIZE*6] = tmp13 - z1;
-
- /* Odd part */
-
- tmp10 = tmp4 + tmp5; /* phase 2 */
- tmp11 = tmp5 + tmp6;
- tmp12 = tmp6 + tmp7;
-
- /* The rotator is modified from fig 4-8 to avoid extra negations. */
- z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */
- z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */
- z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */
- z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */
-
- z11 = tmp7 + z3; /* phase 5 */
- z13 = tmp7 - z3;
-
- dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */
- dataptr[DCTSIZE*3] = z13 - z2;
- dataptr[DCTSIZE*1] = z11 + z4;
- dataptr[DCTSIZE*7] = z11 - z4;
-
- dataptr++; /* advance pointer to next column */
- }
-}
-
-#endif /* DCT_IFAST_SUPPORTED */
diff --git a/libjpegtwrp/jfdctint.c b/libjpegtwrp/jfdctint.c
deleted file mode 100644
index 0a78b64ae..000000000
--- a/libjpegtwrp/jfdctint.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * jfdctint.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a slow-but-accurate integer implementation of the
- * forward DCT (Discrete Cosine Transform).
- *
- * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT
- * on each column. Direct algorithms are also available, but they are
- * much more complex and seem not to be any faster when reduced to code.
- *
- * This implementation is based on an algorithm described in
- * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT
- * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics,
- * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991.
- * The primary algorithm described there uses 11 multiplies and 29 adds.
- * We use their alternate method with 12 multiplies and 32 adds.
- * The advantage of this method is that no data path contains more than one
- * multiplication; this allows a very simple and accurate implementation in
- * scaled fixed-point arithmetic, with a minimal number of shifts.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdct.h" /* Private declarations for DCT subsystem */
-
-#ifdef DCT_ISLOW_SUPPORTED
-
-
-/*
- * This module is specialized to the case DCTSIZE = 8.
- */
-
-#if DCTSIZE != 8
- Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
-#endif
-
-
-/*
- * The poop on this scaling stuff is as follows:
- *
- * Each 1-D DCT step produces outputs which are a factor of sqrt(N)
- * larger than the true DCT outputs. The final outputs are therefore
- * a factor of N larger than desired; since N=8 this can be cured by
- * a simple right shift at the end of the algorithm. The advantage of
- * this arrangement is that we save two multiplications per 1-D DCT,
- * because the y0 and y4 outputs need not be divided by sqrt(N).
- * In the IJG code, this factor of 8 is removed by the quantization step
- * (in jcdctmgr.c), NOT in this module.
- *
- * We have to do addition and subtraction of the integer inputs, which
- * is no problem, and multiplication by fractional constants, which is
- * a problem to do in integer arithmetic. We multiply all the constants
- * by CONST_SCALE and convert them to integer constants (thus retaining
- * CONST_BITS bits of precision in the constants). After doing a
- * multiplication we have to divide the product by CONST_SCALE, with proper
- * rounding, to produce the correct output. This division can be done
- * cheaply as a right shift of CONST_BITS bits. We postpone shifting
- * as long as possible so that partial sums can be added together with
- * full fractional precision.
- *
- * The outputs of the first pass are scaled up by PASS1_BITS bits so that
- * they are represented to better-than-integral precision. These outputs
- * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word
- * with the recommended scaling. (For 12-bit sample data, the intermediate
- * array is INT32 anyway.)
- *
- * To avoid overflow of the 32-bit intermediate results in pass 2, we must
- * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis
- * shows that the values given below are the most effective.
- */
-
-#if BITS_IN_JSAMPLE == 8
-#define CONST_BITS 13
-#define PASS1_BITS 2
-#else
-#define CONST_BITS 13
-#define PASS1_BITS 1 /* lose a little precision to avoid overflow */
-#endif
-
-/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
- * causing a lot of useless floating-point operations at run time.
- * To get around this we use the following pre-calculated constants.
- * If you change CONST_BITS you may want to add appropriate values.
- * (With a reasonable C compiler, you can just rely on the FIX() macro...)
- */
-
-#if CONST_BITS == 13
-#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */
-#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */
-#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */
-#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */
-#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */
-#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */
-#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */
-#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */
-#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */
-#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */
-#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */
-#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */
-#else
-#define FIX_0_298631336 FIX(0.298631336)
-#define FIX_0_390180644 FIX(0.390180644)
-#define FIX_0_541196100 FIX(0.541196100)
-#define FIX_0_765366865 FIX(0.765366865)
-#define FIX_0_899976223 FIX(0.899976223)
-#define FIX_1_175875602 FIX(1.175875602)
-#define FIX_1_501321110 FIX(1.501321110)
-#define FIX_1_847759065 FIX(1.847759065)
-#define FIX_1_961570560 FIX(1.961570560)
-#define FIX_2_053119869 FIX(2.053119869)
-#define FIX_2_562915447 FIX(2.562915447)
-#define FIX_3_072711026 FIX(3.072711026)
-#endif
-
-
-/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result.
- * For 8-bit samples with the recommended scaling, all the variable
- * and constant values involved are no more than 16 bits wide, so a
- * 16x16->32 bit multiply can be used instead of a full 32x32 multiply.
- * For 12-bit samples, a full 32-bit multiplication will be needed.
- */
-
-#if BITS_IN_JSAMPLE == 8
-#define MULTIPLY(var,const) MULTIPLY16C16(var,const)
-#else
-#define MULTIPLY(var,const) ((var) * (const))
-#endif
-
-
-/*
- * Perform the forward DCT on one block of samples.
- */
-
-GLOBAL(void)
-jpeg_fdct_islow (DCTELEM * data)
-{
- INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
- INT32 tmp10, tmp11, tmp12, tmp13;
- INT32 z1, z2, z3, z4, z5;
- DCTELEM *dataptr;
- int ctr;
- SHIFT_TEMPS
-
- /* Pass 1: process rows. */
- /* Note results are scaled up by sqrt(8) compared to a true DCT; */
- /* furthermore, we scale the results by 2**PASS1_BITS. */
-
- dataptr = data;
- for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
- tmp0 = dataptr[0] + dataptr[7];
- tmp7 = dataptr[0] - dataptr[7];
- tmp1 = dataptr[1] + dataptr[6];
- tmp6 = dataptr[1] - dataptr[6];
- tmp2 = dataptr[2] + dataptr[5];
- tmp5 = dataptr[2] - dataptr[5];
- tmp3 = dataptr[3] + dataptr[4];
- tmp4 = dataptr[3] - dataptr[4];
-
- /* Even part per LL&M figure 1 --- note that published figure is faulty;
- * rotator "sqrt(2)*c1" should be "sqrt(2)*c6".
- */
-
- tmp10 = tmp0 + tmp3;
- tmp13 = tmp0 - tmp3;
- tmp11 = tmp1 + tmp2;
- tmp12 = tmp1 - tmp2;
-
- dataptr[0] = (DCTELEM) ((tmp10 + tmp11) << PASS1_BITS);
- dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS);
-
- z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
- dataptr[2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865),
- CONST_BITS-PASS1_BITS);
- dataptr[6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065),
- CONST_BITS-PASS1_BITS);
-
- /* Odd part per figure 8 --- note paper omits factor of sqrt(2).
- * cK represents cos(K*pi/16).
- * i0..i3 in the paper are tmp4..tmp7 here.
- */
-
- z1 = tmp4 + tmp7;
- z2 = tmp5 + tmp6;
- z3 = tmp4 + tmp6;
- z4 = tmp5 + tmp7;
- z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */
-
- tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
- tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
- tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
- tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
- z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
- z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
- z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
- z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
-
- z3 += z5;
- z4 += z5;
-
- dataptr[7] = (DCTELEM) DESCALE(tmp4 + z1 + z3, CONST_BITS-PASS1_BITS);
- dataptr[5] = (DCTELEM) DESCALE(tmp5 + z2 + z4, CONST_BITS-PASS1_BITS);
- dataptr[3] = (DCTELEM) DESCALE(tmp6 + z2 + z3, CONST_BITS-PASS1_BITS);
- dataptr[1] = (DCTELEM) DESCALE(tmp7 + z1 + z4, CONST_BITS-PASS1_BITS);
-
- dataptr += DCTSIZE; /* advance pointer to next row */
- }
-
- /* Pass 2: process columns.
- * We remove the PASS1_BITS scaling, but leave the results scaled up
- * by an overall factor of 8.
- */
-
- dataptr = data;
- for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
- tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7];
- tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7];
- tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6];
- tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6];
- tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5];
- tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5];
- tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4];
- tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4];
-
- /* Even part per LL&M figure 1 --- note that published figure is faulty;
- * rotator "sqrt(2)*c1" should be "sqrt(2)*c6".
- */
-
- tmp10 = tmp0 + tmp3;
- tmp13 = tmp0 - tmp3;
- tmp11 = tmp1 + tmp2;
- tmp12 = tmp1 - tmp2;
-
- dataptr[DCTSIZE*0] = (DCTELEM) DESCALE(tmp10 + tmp11, PASS1_BITS);
- dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp10 - tmp11, PASS1_BITS);
-
- z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
- dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865),
- CONST_BITS+PASS1_BITS);
- dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065),
- CONST_BITS+PASS1_BITS);
-
- /* Odd part per figure 8 --- note paper omits factor of sqrt(2).
- * cK represents cos(K*pi/16).
- * i0..i3 in the paper are tmp4..tmp7 here.
- */
-
- z1 = tmp4 + tmp7;
- z2 = tmp5 + tmp6;
- z3 = tmp4 + tmp6;
- z4 = tmp5 + tmp7;
- z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */
-
- tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
- tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
- tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
- tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
- z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
- z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
- z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
- z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
-
- z3 += z5;
- z4 += z5;
-
- dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp4 + z1 + z3,
- CONST_BITS+PASS1_BITS);
- dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp5 + z2 + z4,
- CONST_BITS+PASS1_BITS);
- dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp6 + z2 + z3,
- CONST_BITS+PASS1_BITS);
- dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp7 + z1 + z4,
- CONST_BITS+PASS1_BITS);
-
- dataptr++; /* advance pointer to next column */
- }
-}
-
-#endif /* DCT_ISLOW_SUPPORTED */
diff --git a/libjpegtwrp/jidctflt.c b/libjpegtwrp/jidctflt.c
deleted file mode 100644
index 0188ce3df..000000000
--- a/libjpegtwrp/jidctflt.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * jidctflt.c
- *
- * Copyright (C) 1994-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a floating-point implementation of the
- * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine
- * must also perform dequantization of the input coefficients.
- *
- * This implementation should be more accurate than either of the integer
- * IDCT implementations. However, it may not give the same results on all
- * machines because of differences in roundoff behavior. Speed will depend
- * on the hardware's floating point capacity.
- *
- * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT
- * on each row (or vice versa, but it's more convenient to emit a row at
- * a time). Direct algorithms are also available, but they are much more
- * complex and seem not to be any faster when reduced to code.
- *
- * This implementation is based on Arai, Agui, and Nakajima's algorithm for
- * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in
- * Japanese, but the algorithm is described in the Pennebaker & Mitchell
- * JPEG textbook (see REFERENCES section in file README). The following code
- * is based directly on figure 4-8 in P&M.
- * While an 8-point DCT cannot be done in less than 11 multiplies, it is
- * possible to arrange the computation so that many of the multiplies are
- * simple scalings of the final outputs. These multiplies can then be
- * folded into the multiplications or divisions by the JPEG quantization
- * table entries. The AA&N method leaves only 5 multiplies and 29 adds
- * to be done in the DCT itself.
- * The primary disadvantage of this method is that with a fixed-point
- * implementation, accuracy is lost due to imprecise representation of the
- * scaled quantization values. However, that problem does not arise if
- * we use floating point arithmetic.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdct.h" /* Private declarations for DCT subsystem */
-
-#ifdef DCT_FLOAT_SUPPORTED
-
-
-/*
- * This module is specialized to the case DCTSIZE = 8.
- */
-
-#if DCTSIZE != 8
- Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
-#endif
-
-
-/* Dequantize a coefficient by multiplying it by the multiplier-table
- * entry; produce a float result.
- */
-
-#define DEQUANTIZE(coef,quantval) (((FAST_FLOAT) (coef)) * (quantval))
-
-
-/*
- * Perform dequantization and inverse DCT on one block of coefficients.
- */
-
-GLOBAL(void)
-jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block,
- JSAMPARRAY output_buf, JDIMENSION output_col)
-{
- FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
- FAST_FLOAT tmp10, tmp11, tmp12, tmp13;
- FAST_FLOAT z5, z10, z11, z12, z13;
- JCOEFPTR inptr;
- FLOAT_MULT_TYPE * quantptr;
- FAST_FLOAT * wsptr;
- JSAMPROW outptr;
- JSAMPLE *range_limit = IDCT_range_limit(cinfo);
- int ctr;
- FAST_FLOAT workspace[DCTSIZE2]; /* buffers data between passes */
- SHIFT_TEMPS
-
- /* Pass 1: process columns from input, store into work array. */
-
- inptr = coef_block;
- quantptr = (FLOAT_MULT_TYPE *) compptr->dct_table;
- wsptr = workspace;
- for (ctr = DCTSIZE; ctr > 0; ctr--) {
- /* Due to quantization, we will usually find that many of the input
- * coefficients are zero, especially the AC terms. We can exploit this
- * by short-circuiting the IDCT calculation for any column in which all
- * the AC terms are zero. In that case each output is equal to the
- * DC coefficient (with scale factor as needed).
- * With typical images and quantization tables, half or more of the
- * column DCT calculations can be simplified this way.
- */
-
- if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
- inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 &&
- inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 &&
- inptr[DCTSIZE*7] == 0) {
- /* AC terms all zero */
- FAST_FLOAT dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
-
- wsptr[DCTSIZE*0] = dcval;
- wsptr[DCTSIZE*1] = dcval;
- wsptr[DCTSIZE*2] = dcval;
- wsptr[DCTSIZE*3] = dcval;
- wsptr[DCTSIZE*4] = dcval;
- wsptr[DCTSIZE*5] = dcval;
- wsptr[DCTSIZE*6] = dcval;
- wsptr[DCTSIZE*7] = dcval;
-
- inptr++; /* advance pointers to next column */
- quantptr++;
- wsptr++;
- continue;
- }
-
- /* Even part */
-
- tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
- tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
- tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
- tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
-
- tmp10 = tmp0 + tmp2; /* phase 3 */
- tmp11 = tmp0 - tmp2;
-
- tmp13 = tmp1 + tmp3; /* phases 5-3 */
- tmp12 = (tmp1 - tmp3) * ((FAST_FLOAT) 1.414213562) - tmp13; /* 2*c4 */
-
- tmp0 = tmp10 + tmp13; /* phase 2 */
- tmp3 = tmp10 - tmp13;
- tmp1 = tmp11 + tmp12;
- tmp2 = tmp11 - tmp12;
-
- /* Odd part */
-
- tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
- tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
- tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
- tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
-
- z13 = tmp6 + tmp5; /* phase 6 */
- z10 = tmp6 - tmp5;
- z11 = tmp4 + tmp7;
- z12 = tmp4 - tmp7;
-
- tmp7 = z11 + z13; /* phase 5 */
- tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */
-
- z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */
- tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */
- tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */
-
- tmp6 = tmp12 - tmp7; /* phase 2 */
- tmp5 = tmp11 - tmp6;
- tmp4 = tmp10 + tmp5;
-
- wsptr[DCTSIZE*0] = tmp0 + tmp7;
- wsptr[DCTSIZE*7] = tmp0 - tmp7;
- wsptr[DCTSIZE*1] = tmp1 + tmp6;
- wsptr[DCTSIZE*6] = tmp1 - tmp6;
- wsptr[DCTSIZE*2] = tmp2 + tmp5;
- wsptr[DCTSIZE*5] = tmp2 - tmp5;
- wsptr[DCTSIZE*4] = tmp3 + tmp4;
- wsptr[DCTSIZE*3] = tmp3 - tmp4;
-
- inptr++; /* advance pointers to next column */
- quantptr++;
- wsptr++;
- }
-
- /* Pass 2: process rows from work array, store into output array. */
- /* Note that we must descale the results by a factor of 8 == 2**3. */
-
- wsptr = workspace;
- for (ctr = 0; ctr < DCTSIZE; ctr++) {
- outptr = output_buf[ctr] + output_col;
- /* Rows of zeroes can be exploited in the same way as we did with columns.
- * However, the column calculation has created many nonzero AC terms, so
- * the simplification applies less often (typically 5% to 10% of the time).
- * And testing floats for zero is relatively expensive, so we don't bother.
- */
-
- /* Even part */
-
- tmp10 = wsptr[0] + wsptr[4];
- tmp11 = wsptr[0] - wsptr[4];
-
- tmp13 = wsptr[2] + wsptr[6];
- tmp12 = (wsptr[2] - wsptr[6]) * ((FAST_FLOAT) 1.414213562) - tmp13;
-
- tmp0 = tmp10 + tmp13;
- tmp3 = tmp10 - tmp13;
- tmp1 = tmp11 + tmp12;
- tmp2 = tmp11 - tmp12;
-
- /* Odd part */
-
- z13 = wsptr[5] + wsptr[3];
- z10 = wsptr[5] - wsptr[3];
- z11 = wsptr[1] + wsptr[7];
- z12 = wsptr[1] - wsptr[7];
-
- tmp7 = z11 + z13;
- tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562);
-
- z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */
- tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */
- tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */
-
- tmp6 = tmp12 - tmp7;
- tmp5 = tmp11 - tmp6;
- tmp4 = tmp10 + tmp5;
-
- /* Final output stage: scale down by a factor of 8 and range-limit */
-
- outptr[0] = range_limit[(int) DESCALE((INT32) (tmp0 + tmp7), 3)
- & RANGE_MASK];
- outptr[7] = range_limit[(int) DESCALE((INT32) (tmp0 - tmp7), 3)
- & RANGE_MASK];
- outptr[1] = range_limit[(int) DESCALE((INT32) (tmp1 + tmp6), 3)
- & RANGE_MASK];
- outptr[6] = range_limit[(int) DESCALE((INT32) (tmp1 - tmp6), 3)
- & RANGE_MASK];
- outptr[2] = range_limit[(int) DESCALE((INT32) (tmp2 + tmp5), 3)
- & RANGE_MASK];
- outptr[5] = range_limit[(int) DESCALE((INT32) (tmp2 - tmp5), 3)
- & RANGE_MASK];
- outptr[4] = range_limit[(int) DESCALE((INT32) (tmp3 + tmp4), 3)
- & RANGE_MASK];
- outptr[3] = range_limit[(int) DESCALE((INT32) (tmp3 - tmp4), 3)
- & RANGE_MASK];
-
- wsptr += DCTSIZE; /* advance pointer to next row */
- }
-}
-
-#endif /* DCT_FLOAT_SUPPORTED */
diff --git a/libjpegtwrp/jidctfst.c b/libjpegtwrp/jidctfst.c
deleted file mode 100644
index dba4216fb..000000000
--- a/libjpegtwrp/jidctfst.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * jidctfst.c
- *
- * Copyright (C) 1994-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a fast, not so accurate integer implementation of the
- * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine
- * must also perform dequantization of the input coefficients.
- *
- * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT
- * on each row (or vice versa, but it's more convenient to emit a row at
- * a time). Direct algorithms are also available, but they are much more
- * complex and seem not to be any faster when reduced to code.
- *
- * This implementation is based on Arai, Agui, and Nakajima's algorithm for
- * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in
- * Japanese, but the algorithm is described in the Pennebaker & Mitchell
- * JPEG textbook (see REFERENCES section in file README). The following code
- * is based directly on figure 4-8 in P&M.
- * While an 8-point DCT cannot be done in less than 11 multiplies, it is
- * possible to arrange the computation so that many of the multiplies are
- * simple scalings of the final outputs. These multiplies can then be
- * folded into the multiplications or divisions by the JPEG quantization
- * table entries. The AA&N method leaves only 5 multiplies and 29 adds
- * to be done in the DCT itself.
- * The primary disadvantage of this method is that with fixed-point math,
- * accuracy is lost due to imprecise representation of the scaled
- * quantization values. The smaller the quantization table entry, the less
- * precise the scaled value, so this implementation does worse with high-
- * quality-setting files than with low-quality ones.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdct.h" /* Private declarations for DCT subsystem */
-
-#ifdef DCT_IFAST_SUPPORTED
-
-
-/*
- * This module is specialized to the case DCTSIZE = 8.
- */
-
-#if DCTSIZE != 8
- Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
-#endif
-
-
-/* Scaling decisions are generally the same as in the LL&M algorithm;
- * see jidctint.c for more details. However, we choose to descale
- * (right shift) multiplication products as soon as they are formed,
- * rather than carrying additional fractional bits into subsequent additions.
- * This compromises accuracy slightly, but it lets us save a few shifts.
- * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples)
- * everywhere except in the multiplications proper; this saves a good deal
- * of work on 16-bit-int machines.
- *
- * The dequantized coefficients are not integers because the AA&N scaling
- * factors have been incorporated. We represent them scaled up by PASS1_BITS,
- * so that the first and second IDCT rounds have the same input scaling.
- * For 8-bit JSAMPLEs, we choose IFAST_SCALE_BITS = PASS1_BITS so as to
- * avoid a descaling shift; this compromises accuracy rather drastically
- * for small quantization table entries, but it saves a lot of shifts.
- * For 12-bit JSAMPLEs, there's no hope of using 16x16 multiplies anyway,
- * so we use a much larger scaling factor to preserve accuracy.
- *
- * A final compromise is to represent the multiplicative constants to only
- * 8 fractional bits, rather than 13. This saves some shifting work on some
- * machines, and may also reduce the cost of multiplication (since there
- * are fewer one-bits in the constants).
- */
-
-#if BITS_IN_JSAMPLE == 8
-#define CONST_BITS 8
-#define PASS1_BITS 2
-#else
-#define CONST_BITS 8
-#define PASS1_BITS 1 /* lose a little precision to avoid overflow */
-#endif
-
-/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
- * causing a lot of useless floating-point operations at run time.
- * To get around this we use the following pre-calculated constants.
- * If you change CONST_BITS you may want to add appropriate values.
- * (With a reasonable C compiler, you can just rely on the FIX() macro...)
- */
-
-#if CONST_BITS == 8
-#define FIX_1_082392200 ((INT32) 277) /* FIX(1.082392200) */
-#define FIX_1_414213562 ((INT32) 362) /* FIX(1.414213562) */
-#define FIX_1_847759065 ((INT32) 473) /* FIX(1.847759065) */
-#define FIX_2_613125930 ((INT32) 669) /* FIX(2.613125930) */
-#else
-#define FIX_1_082392200 FIX(1.082392200)
-#define FIX_1_414213562 FIX(1.414213562)
-#define FIX_1_847759065 FIX(1.847759065)
-#define FIX_2_613125930 FIX(2.613125930)
-#endif
-
-
-/* We can gain a little more speed, with a further compromise in accuracy,
- * by omitting the addition in a descaling shift. This yields an incorrectly
- * rounded result half the time...
- */
-
-#ifndef USE_ACCURATE_ROUNDING
-#undef DESCALE
-#define DESCALE(x,n) RIGHT_SHIFT(x, n)
-#endif
-
-
-/* Multiply a DCTELEM variable by an INT32 constant, and immediately
- * descale to yield a DCTELEM result.
- */
-
-#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS))
-
-
-/* Dequantize a coefficient by multiplying it by the multiplier-table
- * entry; produce a DCTELEM result. For 8-bit data a 16x16->16
- * multiplication will do. For 12-bit data, the multiplier table is
- * declared INT32, so a 32-bit multiply will be used.
- */
-
-#if BITS_IN_JSAMPLE == 8
-#define DEQUANTIZE(coef,quantval) (((IFAST_MULT_TYPE) (coef)) * (quantval))
-#else
-#define DEQUANTIZE(coef,quantval) \
- DESCALE((coef)*(quantval), IFAST_SCALE_BITS-PASS1_BITS)
-#endif
-
-
-/* Like DESCALE, but applies to a DCTELEM and produces an int.
- * We assume that int right shift is unsigned if INT32 right shift is.
- */
-
-#ifdef RIGHT_SHIFT_IS_UNSIGNED
-#define ISHIFT_TEMPS DCTELEM ishift_temp;
-#if BITS_IN_JSAMPLE == 8
-#define DCTELEMBITS 16 /* DCTELEM may be 16 or 32 bits */
-#else
-#define DCTELEMBITS 32 /* DCTELEM must be 32 bits */
-#endif
-#define IRIGHT_SHIFT(x,shft) \
- ((ishift_temp = (x)) < 0 ? \
- (ishift_temp >> (shft)) | ((~((DCTELEM) 0)) << (DCTELEMBITS-(shft))) : \
- (ishift_temp >> (shft)))
-#else
-#define ISHIFT_TEMPS
-#define IRIGHT_SHIFT(x,shft) ((x) >> (shft))
-#endif
-
-#ifdef USE_ACCURATE_ROUNDING
-#define IDESCALE(x,n) ((int) IRIGHT_SHIFT((x) + (1 << ((n)-1)), n))
-#else
-#define IDESCALE(x,n) ((int) IRIGHT_SHIFT(x, n))
-#endif
-
-
-/*
- * Perform dequantization and inverse DCT on one block of coefficients.
- */
-
-GLOBAL(void)
-jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block,
- JSAMPARRAY output_buf, JDIMENSION output_col)
-{
- DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
- DCTELEM tmp10, tmp11, tmp12, tmp13;
- DCTELEM z5, z10, z11, z12, z13;
- JCOEFPTR inptr;
- IFAST_MULT_TYPE * quantptr;
- int * wsptr;
- JSAMPROW outptr;
- JSAMPLE *range_limit = IDCT_range_limit(cinfo);
- int ctr;
- int workspace[DCTSIZE2]; /* buffers data between passes */
- SHIFT_TEMPS /* for DESCALE */
- ISHIFT_TEMPS /* for IDESCALE */
-
- /* Pass 1: process columns from input, store into work array. */
-
- inptr = coef_block;
- quantptr = (IFAST_MULT_TYPE *) compptr->dct_table;
- wsptr = workspace;
- for (ctr = DCTSIZE; ctr > 0; ctr--) {
- /* Due to quantization, we will usually find that many of the input
- * coefficients are zero, especially the AC terms. We can exploit this
- * by short-circuiting the IDCT calculation for any column in which all
- * the AC terms are zero. In that case each output is equal to the
- * DC coefficient (with scale factor as needed).
- * With typical images and quantization tables, half or more of the
- * column DCT calculations can be simplified this way.
- */
-
- if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
- inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 &&
- inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 &&
- inptr[DCTSIZE*7] == 0) {
- /* AC terms all zero */
- int dcval = (int) DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
-
- wsptr[DCTSIZE*0] = dcval;
- wsptr[DCTSIZE*1] = dcval;
- wsptr[DCTSIZE*2] = dcval;
- wsptr[DCTSIZE*3] = dcval;
- wsptr[DCTSIZE*4] = dcval;
- wsptr[DCTSIZE*5] = dcval;
- wsptr[DCTSIZE*6] = dcval;
- wsptr[DCTSIZE*7] = dcval;
-
- inptr++; /* advance pointers to next column */
- quantptr++;
- wsptr++;
- continue;
- }
-
- /* Even part */
-
- tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
- tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
- tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
- tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
-
- tmp10 = tmp0 + tmp2; /* phase 3 */
- tmp11 = tmp0 - tmp2;
-
- tmp13 = tmp1 + tmp3; /* phases 5-3 */
- tmp12 = MULTIPLY(tmp1 - tmp3, FIX_1_414213562) - tmp13; /* 2*c4 */
-
- tmp0 = tmp10 + tmp13; /* phase 2 */
- tmp3 = tmp10 - tmp13;
- tmp1 = tmp11 + tmp12;
- tmp2 = tmp11 - tmp12;
-
- /* Odd part */
-
- tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
- tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
- tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
- tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
-
- z13 = tmp6 + tmp5; /* phase 6 */
- z10 = tmp6 - tmp5;
- z11 = tmp4 + tmp7;
- z12 = tmp4 - tmp7;
-
- tmp7 = z11 + z13; /* phase 5 */
- tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */
-
- z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */
- tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */
- tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */
-
- tmp6 = tmp12 - tmp7; /* phase 2 */
- tmp5 = tmp11 - tmp6;
- tmp4 = tmp10 + tmp5;
-
- wsptr[DCTSIZE*0] = (int) (tmp0 + tmp7);
- wsptr[DCTSIZE*7] = (int) (tmp0 - tmp7);
- wsptr[DCTSIZE*1] = (int) (tmp1 + tmp6);
- wsptr[DCTSIZE*6] = (int) (tmp1 - tmp6);
- wsptr[DCTSIZE*2] = (int) (tmp2 + tmp5);
- wsptr[DCTSIZE*5] = (int) (tmp2 - tmp5);
- wsptr[DCTSIZE*4] = (int) (tmp3 + tmp4);
- wsptr[DCTSIZE*3] = (int) (tmp3 - tmp4);
-
- inptr++; /* advance pointers to next column */
- quantptr++;
- wsptr++;
- }
-
- /* Pass 2: process rows from work array, store into output array. */
- /* Note that we must descale the results by a factor of 8 == 2**3, */
- /* and also undo the PASS1_BITS scaling. */
-
- wsptr = workspace;
- for (ctr = 0; ctr < DCTSIZE; ctr++) {
- outptr = output_buf[ctr] + output_col;
- /* Rows of zeroes can be exploited in the same way as we did with columns.
- * However, the column calculation has created many nonzero AC terms, so
- * the simplification applies less often (typically 5% to 10% of the time).
- * On machines with very fast multiplication, it's possible that the
- * test takes more time than it's worth. In that case this section
- * may be commented out.
- */
-
-#ifndef NO_ZERO_ROW_TEST
- if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 &&
- wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) {
- /* AC terms all zero */
- JSAMPLE dcval = range_limit[IDESCALE(wsptr[0], PASS1_BITS+3)
- & RANGE_MASK];
-
- outptr[0] = dcval;
- outptr[1] = dcval;
- outptr[2] = dcval;
- outptr[3] = dcval;
- outptr[4] = dcval;
- outptr[5] = dcval;
- outptr[6] = dcval;
- outptr[7] = dcval;
-
- wsptr += DCTSIZE; /* advance pointer to next row */
- continue;
- }
-#endif
-
- /* Even part */
-
- tmp10 = ((DCTELEM) wsptr[0] + (DCTELEM) wsptr[4]);
- tmp11 = ((DCTELEM) wsptr[0] - (DCTELEM) wsptr[4]);
-
- tmp13 = ((DCTELEM) wsptr[2] + (DCTELEM) wsptr[6]);
- tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6], FIX_1_414213562)
- - tmp13;
-
- tmp0 = tmp10 + tmp13;
- tmp3 = tmp10 - tmp13;
- tmp1 = tmp11 + tmp12;
- tmp2 = tmp11 - tmp12;
-
- /* Odd part */
-
- z13 = (DCTELEM) wsptr[5] + (DCTELEM) wsptr[3];
- z10 = (DCTELEM) wsptr[5] - (DCTELEM) wsptr[3];
- z11 = (DCTELEM) wsptr[1] + (DCTELEM) wsptr[7];
- z12 = (DCTELEM) wsptr[1] - (DCTELEM) wsptr[7];
-
- tmp7 = z11 + z13; /* phase 5 */
- tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */
-
- z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */
- tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */
- tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */
-
- tmp6 = tmp12 - tmp7; /* phase 2 */
- tmp5 = tmp11 - tmp6;
- tmp4 = tmp10 + tmp5;
-
- /* Final output stage: scale down by a factor of 8 and range-limit */
-
- outptr[0] = range_limit[IDESCALE(tmp0 + tmp7, PASS1_BITS+3)
- & RANGE_MASK];
- outptr[7] = range_limit[IDESCALE(tmp0 - tmp7, PASS1_BITS+3)
- & RANGE_MASK];
- outptr[1] = range_limit[IDESCALE(tmp1 + tmp6, PASS1_BITS+3)
- & RANGE_MASK];
- outptr[6] = range_limit[IDESCALE(tmp1 - tmp6, PASS1_BITS+3)
- & RANGE_MASK];
- outptr[2] = range_limit[IDESCALE(tmp2 + tmp5, PASS1_BITS+3)
- & RANGE_MASK];
- outptr[5] = range_limit[IDESCALE(tmp2 - tmp5, PASS1_BITS+3)
- & RANGE_MASK];
- outptr[4] = range_limit[IDESCALE(tmp3 + tmp4, PASS1_BITS+3)
- & RANGE_MASK];
- outptr[3] = range_limit[IDESCALE(tmp3 - tmp4, PASS1_BITS+3)
- & RANGE_MASK];
-
- wsptr += DCTSIZE; /* advance pointer to next row */
- }
-}
-
-#endif /* DCT_IFAST_SUPPORTED */
diff --git a/libjpegtwrp/jidctint.c b/libjpegtwrp/jidctint.c
deleted file mode 100644
index a72b3207c..000000000
--- a/libjpegtwrp/jidctint.c
+++ /dev/null
@@ -1,389 +0,0 @@
-/*
- * jidctint.c
- *
- * Copyright (C) 1991-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a slow-but-accurate integer implementation of the
- * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine
- * must also perform dequantization of the input coefficients.
- *
- * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT
- * on each row (or vice versa, but it's more convenient to emit a row at
- * a time). Direct algorithms are also available, but they are much more
- * complex and seem not to be any faster when reduced to code.
- *
- * This implementation is based on an algorithm described in
- * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT
- * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics,
- * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991.
- * The primary algorithm described there uses 11 multiplies and 29 adds.
- * We use their alternate method with 12 multiplies and 32 adds.
- * The advantage of this method is that no data path contains more than one
- * multiplication; this allows a very simple and accurate implementation in
- * scaled fixed-point arithmetic, with a minimal number of shifts.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdct.h" /* Private declarations for DCT subsystem */
-
-#ifdef DCT_ISLOW_SUPPORTED
-
-
-/*
- * This module is specialized to the case DCTSIZE = 8.
- */
-
-#if DCTSIZE != 8
- Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
-#endif
-
-
-/*
- * The poop on this scaling stuff is as follows:
- *
- * Each 1-D IDCT step produces outputs which are a factor of sqrt(N)
- * larger than the true IDCT outputs. The final outputs are therefore
- * a factor of N larger than desired; since N=8 this can be cured by
- * a simple right shift at the end of the algorithm. The advantage of
- * this arrangement is that we save two multiplications per 1-D IDCT,
- * because the y0 and y4 inputs need not be divided by sqrt(N).
- *
- * We have to do addition and subtraction of the integer inputs, which
- * is no problem, and multiplication by fractional constants, which is
- * a problem to do in integer arithmetic. We multiply all the constants
- * by CONST_SCALE and convert them to integer constants (thus retaining
- * CONST_BITS bits of precision in the constants). After doing a
- * multiplication we have to divide the product by CONST_SCALE, with proper
- * rounding, to produce the correct output. This division can be done
- * cheaply as a right shift of CONST_BITS bits. We postpone shifting
- * as long as possible so that partial sums can be added together with
- * full fractional precision.
- *
- * The outputs of the first pass are scaled up by PASS1_BITS bits so that
- * they are represented to better-than-integral precision. These outputs
- * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word
- * with the recommended scaling. (To scale up 12-bit sample data further, an
- * intermediate INT32 array would be needed.)
- *
- * To avoid overflow of the 32-bit intermediate results in pass 2, we must
- * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis
- * shows that the values given below are the most effective.
- */
-
-#if BITS_IN_JSAMPLE == 8
-#define CONST_BITS 13
-#define PASS1_BITS 2
-#else
-#define CONST_BITS 13
-#define PASS1_BITS 1 /* lose a little precision to avoid overflow */
-#endif
-
-/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
- * causing a lot of useless floating-point operations at run time.
- * To get around this we use the following pre-calculated constants.
- * If you change CONST_BITS you may want to add appropriate values.
- * (With a reasonable C compiler, you can just rely on the FIX() macro...)
- */
-
-#if CONST_BITS == 13
-#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */
-#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */
-#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */
-#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */
-#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */
-#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */
-#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */
-#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */
-#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */
-#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */
-#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */
-#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */
-#else
-#define FIX_0_298631336 FIX(0.298631336)
-#define FIX_0_390180644 FIX(0.390180644)
-#define FIX_0_541196100 FIX(0.541196100)
-#define FIX_0_765366865 FIX(0.765366865)
-#define FIX_0_899976223 FIX(0.899976223)
-#define FIX_1_175875602 FIX(1.175875602)
-#define FIX_1_501321110 FIX(1.501321110)
-#define FIX_1_847759065 FIX(1.847759065)
-#define FIX_1_961570560 FIX(1.961570560)
-#define FIX_2_053119869 FIX(2.053119869)
-#define FIX_2_562915447 FIX(2.562915447)
-#define FIX_3_072711026 FIX(3.072711026)
-#endif
-
-
-/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result.
- * For 8-bit samples with the recommended scaling, all the variable
- * and constant values involved are no more than 16 bits wide, so a
- * 16x16->32 bit multiply can be used instead of a full 32x32 multiply.
- * For 12-bit samples, a full 32-bit multiplication will be needed.
- */
-
-#if BITS_IN_JSAMPLE == 8
-#define MULTIPLY(var,const) MULTIPLY16C16(var,const)
-#else
-#define MULTIPLY(var,const) ((var) * (const))
-#endif
-
-
-/* Dequantize a coefficient by multiplying it by the multiplier-table
- * entry; produce an int result. In this module, both inputs and result
- * are 16 bits or less, so either int or short multiply will work.
- */
-
-#define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval))
-
-
-/*
- * Perform dequantization and inverse DCT on one block of coefficients.
- */
-
-GLOBAL(void)
-jpeg_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block,
- JSAMPARRAY output_buf, JDIMENSION output_col)
-{
- INT32 tmp0, tmp1, tmp2, tmp3;
- INT32 tmp10, tmp11, tmp12, tmp13;
- INT32 z1, z2, z3, z4, z5;
- JCOEFPTR inptr;
- ISLOW_MULT_TYPE * quantptr;
- int * wsptr;
- JSAMPROW outptr;
- JSAMPLE *range_limit = IDCT_range_limit(cinfo);
- int ctr;
- int workspace[DCTSIZE2]; /* buffers data between passes */
- SHIFT_TEMPS
-
- /* Pass 1: process columns from input, store into work array. */
- /* Note results are scaled up by sqrt(8) compared to a true IDCT; */
- /* furthermore, we scale the results by 2**PASS1_BITS. */
-
- inptr = coef_block;
- quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
- wsptr = workspace;
- for (ctr = DCTSIZE; ctr > 0; ctr--) {
- /* Due to quantization, we will usually find that many of the input
- * coefficients are zero, especially the AC terms. We can exploit this
- * by short-circuiting the IDCT calculation for any column in which all
- * the AC terms are zero. In that case each output is equal to the
- * DC coefficient (with scale factor as needed).
- * With typical images and quantization tables, half or more of the
- * column DCT calculations can be simplified this way.
- */
-
- if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
- inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 &&
- inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 &&
- inptr[DCTSIZE*7] == 0) {
- /* AC terms all zero */
- int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS;
-
- wsptr[DCTSIZE*0] = dcval;
- wsptr[DCTSIZE*1] = dcval;
- wsptr[DCTSIZE*2] = dcval;
- wsptr[DCTSIZE*3] = dcval;
- wsptr[DCTSIZE*4] = dcval;
- wsptr[DCTSIZE*5] = dcval;
- wsptr[DCTSIZE*6] = dcval;
- wsptr[DCTSIZE*7] = dcval;
-
- inptr++; /* advance pointers to next column */
- quantptr++;
- wsptr++;
- continue;
- }
-
- /* Even part: reverse the even part of the forward DCT. */
- /* The rotator is sqrt(2)*c(-6). */
-
- z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
- z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
-
- z1 = MULTIPLY(z2 + z3, FIX_0_541196100);
- tmp2 = z1 + MULTIPLY(z3, - FIX_1_847759065);
- tmp3 = z1 + MULTIPLY(z2, FIX_0_765366865);
-
- z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
- z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
-
- tmp0 = (z2 + z3) << CONST_BITS;
- tmp1 = (z2 - z3) << CONST_BITS;
-
- tmp10 = tmp0 + tmp3;
- tmp13 = tmp0 - tmp3;
- tmp11 = tmp1 + tmp2;
- tmp12 = tmp1 - tmp2;
-
- /* Odd part per figure 8; the matrix is unitary and hence its
- * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively.
- */
-
- tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
- tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
- tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
- tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
-
- z1 = tmp0 + tmp3;
- z2 = tmp1 + tmp2;
- z3 = tmp0 + tmp2;
- z4 = tmp1 + tmp3;
- z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */
-
- tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
- tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
- tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
- tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
- z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
- z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
- z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
- z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
-
- z3 += z5;
- z4 += z5;
-
- tmp0 += z1 + z3;
- tmp1 += z2 + z4;
- tmp2 += z2 + z3;
- tmp3 += z1 + z4;
-
- /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */
-
- wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp3, CONST_BITS-PASS1_BITS);
- wsptr[DCTSIZE*7] = (int) DESCALE(tmp10 - tmp3, CONST_BITS-PASS1_BITS);
- wsptr[DCTSIZE*1] = (int) DESCALE(tmp11 + tmp2, CONST_BITS-PASS1_BITS);
- wsptr[DCTSIZE*6] = (int) DESCALE(tmp11 - tmp2, CONST_BITS-PASS1_BITS);
- wsptr[DCTSIZE*2] = (int) DESCALE(tmp12 + tmp1, CONST_BITS-PASS1_BITS);
- wsptr[DCTSIZE*5] = (int) DESCALE(tmp12 - tmp1, CONST_BITS-PASS1_BITS);
- wsptr[DCTSIZE*3] = (int) DESCALE(tmp13 + tmp0, CONST_BITS-PASS1_BITS);
- wsptr[DCTSIZE*4] = (int) DESCALE(tmp13 - tmp0, CONST_BITS-PASS1_BITS);
-
- inptr++; /* advance pointers to next column */
- quantptr++;
- wsptr++;
- }
-
- /* Pass 2: process rows from work array, store into output array. */
- /* Note that we must descale the results by a factor of 8 == 2**3, */
- /* and also undo the PASS1_BITS scaling. */
-
- wsptr = workspace;
- for (ctr = 0; ctr < DCTSIZE; ctr++) {
- outptr = output_buf[ctr] + output_col;
- /* Rows of zeroes can be exploited in the same way as we did with columns.
- * However, the column calculation has created many nonzero AC terms, so
- * the simplification applies less often (typically 5% to 10% of the time).
- * On machines with very fast multiplication, it's possible that the
- * test takes more time than it's worth. In that case this section
- * may be commented out.
- */
-
-#ifndef NO_ZERO_ROW_TEST
- if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 &&
- wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) {
- /* AC terms all zero */
- JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3)
- & RANGE_MASK];
-
- outptr[0] = dcval;
- outptr[1] = dcval;
- outptr[2] = dcval;
- outptr[3] = dcval;
- outptr[4] = dcval;
- outptr[5] = dcval;
- outptr[6] = dcval;
- outptr[7] = dcval;
-
- wsptr += DCTSIZE; /* advance pointer to next row */
- continue;
- }
-#endif
-
- /* Even part: reverse the even part of the forward DCT. */
- /* The rotator is sqrt(2)*c(-6). */
-
- z2 = (INT32) wsptr[2];
- z3 = (INT32) wsptr[6];
-
- z1 = MULTIPLY(z2 + z3, FIX_0_541196100);
- tmp2 = z1 + MULTIPLY(z3, - FIX_1_847759065);
- tmp3 = z1 + MULTIPLY(z2, FIX_0_765366865);
-
- tmp0 = ((INT32) wsptr[0] + (INT32) wsptr[4]) << CONST_BITS;
- tmp1 = ((INT32) wsptr[0] - (INT32) wsptr[4]) << CONST_BITS;
-
- tmp10 = tmp0 + tmp3;
- tmp13 = tmp0 - tmp3;
- tmp11 = tmp1 + tmp2;
- tmp12 = tmp1 - tmp2;
-
- /* Odd part per figure 8; the matrix is unitary and hence its
- * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively.
- */
-
- tmp0 = (INT32) wsptr[7];
- tmp1 = (INT32) wsptr[5];
- tmp2 = (INT32) wsptr[3];
- tmp3 = (INT32) wsptr[1];
-
- z1 = tmp0 + tmp3;
- z2 = tmp1 + tmp2;
- z3 = tmp0 + tmp2;
- z4 = tmp1 + tmp3;
- z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */
-
- tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
- tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
- tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
- tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
- z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
- z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
- z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
- z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
-
- z3 += z5;
- z4 += z5;
-
- tmp0 += z1 + z3;
- tmp1 += z2 + z4;
- tmp2 += z2 + z3;
- tmp3 += z1 + z4;
-
- /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */
-
- outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp3,
- CONST_BITS+PASS1_BITS+3)
- & RANGE_MASK];
- outptr[7] = range_limit[(int) DESCALE(tmp10 - tmp3,
- CONST_BITS+PASS1_BITS+3)
- & RANGE_MASK];
- outptr[1] = range_limit[(int) DESCALE(tmp11 + tmp2,
- CONST_BITS+PASS1_BITS+3)
- & RANGE_MASK];
- outptr[6] = range_limit[(int) DESCALE(tmp11 - tmp2,
- CONST_BITS+PASS1_BITS+3)
- & RANGE_MASK];
- outptr[2] = range_limit[(int) DESCALE(tmp12 + tmp1,
- CONST_BITS+PASS1_BITS+3)
- & RANGE_MASK];
- outptr[5] = range_limit[(int) DESCALE(tmp12 - tmp1,
- CONST_BITS+PASS1_BITS+3)
- & RANGE_MASK];
- outptr[3] = range_limit[(int) DESCALE(tmp13 + tmp0,
- CONST_BITS+PASS1_BITS+3)
- & RANGE_MASK];
- outptr[4] = range_limit[(int) DESCALE(tmp13 - tmp0,
- CONST_BITS+PASS1_BITS+3)
- & RANGE_MASK];
-
- wsptr += DCTSIZE; /* advance pointer to next row */
- }
-}
-
-#endif /* DCT_ISLOW_SUPPORTED */
diff --git a/libjpegtwrp/jidctred.c b/libjpegtwrp/jidctred.c
deleted file mode 100644
index 421f3c7ca..000000000
--- a/libjpegtwrp/jidctred.c
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * jidctred.c
- *
- * Copyright (C) 1994-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains inverse-DCT routines that produce reduced-size output:
- * either 4x4, 2x2, or 1x1 pixels from an 8x8 DCT block.
- *
- * The implementation is based on the Loeffler, Ligtenberg and Moschytz (LL&M)
- * algorithm used in jidctint.c. We simply replace each 8-to-8 1-D IDCT step
- * with an 8-to-4 step that produces the four averages of two adjacent outputs
- * (or an 8-to-2 step producing two averages of four outputs, for 2x2 output).
- * These steps were derived by computing the corresponding values at the end
- * of the normal LL&M code, then simplifying as much as possible.
- *
- * 1x1 is trivial: just take the DC coefficient divided by 8.
- *
- * See jidctint.c for additional comments.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdct.h" /* Private declarations for DCT subsystem */
-
-#ifdef IDCT_SCALING_SUPPORTED
-
-
-/*
- * This module is specialized to the case DCTSIZE = 8.
- */
-
-#if DCTSIZE != 8
- Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
-#endif
-
-
-/* Scaling is the same as in jidctint.c. */
-
-#if BITS_IN_JSAMPLE == 8
-#define CONST_BITS 13
-#define PASS1_BITS 2
-#else
-#define CONST_BITS 13
-#define PASS1_BITS 1 /* lose a little precision to avoid overflow */
-#endif
-
-/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
- * causing a lot of useless floating-point operations at run time.
- * To get around this we use the following pre-calculated constants.
- * If you change CONST_BITS you may want to add appropriate values.
- * (With a reasonable C compiler, you can just rely on the FIX() macro...)
- */
-
-#if CONST_BITS == 13
-#define FIX_0_211164243 ((INT32) 1730) /* FIX(0.211164243) */
-#define FIX_0_509795579 ((INT32) 4176) /* FIX(0.509795579) */
-#define FIX_0_601344887 ((INT32) 4926) /* FIX(0.601344887) */
-#define FIX_0_720959822 ((INT32) 5906) /* FIX(0.720959822) */
-#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */
-#define FIX_0_850430095 ((INT32) 6967) /* FIX(0.850430095) */
-#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */
-#define FIX_1_061594337 ((INT32) 8697) /* FIX(1.061594337) */
-#define FIX_1_272758580 ((INT32) 10426) /* FIX(1.272758580) */
-#define FIX_1_451774981 ((INT32) 11893) /* FIX(1.451774981) */
-#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */
-#define FIX_2_172734803 ((INT32) 17799) /* FIX(2.172734803) */
-#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */
-#define FIX_3_624509785 ((INT32) 29692) /* FIX(3.624509785) */
-#else
-#define FIX_0_211164243 FIX(0.211164243)
-#define FIX_0_509795579 FIX(0.509795579)
-#define FIX_0_601344887 FIX(0.601344887)
-#define FIX_0_720959822 FIX(0.720959822)
-#define FIX_0_765366865 FIX(0.765366865)
-#define FIX_0_850430095 FIX(0.850430095)
-#define FIX_0_899976223 FIX(0.899976223)
-#define FIX_1_061594337 FIX(1.061594337)
-#define FIX_1_272758580 FIX(1.272758580)
-#define FIX_1_451774981 FIX(1.451774981)
-#define FIX_1_847759065 FIX(1.847759065)
-#define FIX_2_172734803 FIX(2.172734803)
-#define FIX_2_562915447 FIX(2.562915447)
-#define FIX_3_624509785 FIX(3.624509785)
-#endif
-
-
-/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result.
- * For 8-bit samples with the recommended scaling, all the variable
- * and constant values involved are no more than 16 bits wide, so a
- * 16x16->32 bit multiply can be used instead of a full 32x32 multiply.
- * For 12-bit samples, a full 32-bit multiplication will be needed.
- */
-
-#if BITS_IN_JSAMPLE == 8
-#define MULTIPLY(var,const) MULTIPLY16C16(var,const)
-#else
-#define MULTIPLY(var,const) ((var) * (const))
-#endif
-
-
-/* Dequantize a coefficient by multiplying it by the multiplier-table
- * entry; produce an int result. In this module, both inputs and result
- * are 16 bits or less, so either int or short multiply will work.
- */
-
-#define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval))
-
-
-/*
- * Perform dequantization and inverse DCT on one block of coefficients,
- * producing a reduced-size 4x4 output block.
- */
-
-GLOBAL(void)
-jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block,
- JSAMPARRAY output_buf, JDIMENSION output_col)
-{
- INT32 tmp0, tmp2, tmp10, tmp12;
- INT32 z1, z2, z3, z4;
- JCOEFPTR inptr;
- ISLOW_MULT_TYPE * quantptr;
- int * wsptr;
- JSAMPROW outptr;
- JSAMPLE *range_limit = IDCT_range_limit(cinfo);
- int ctr;
- int workspace[DCTSIZE*4]; /* buffers data between passes */
- SHIFT_TEMPS
-
- /* Pass 1: process columns from input, store into work array. */
-
- inptr = coef_block;
- quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
- wsptr = workspace;
- for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) {
- /* Don't bother to process column 4, because second pass won't use it */
- if (ctr == DCTSIZE-4)
- continue;
- if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
- inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*5] == 0 &&
- inptr[DCTSIZE*6] == 0 && inptr[DCTSIZE*7] == 0) {
- /* AC terms all zero; we need not examine term 4 for 4x4 output */
- int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS;
-
- wsptr[DCTSIZE*0] = dcval;
- wsptr[DCTSIZE*1] = dcval;
- wsptr[DCTSIZE*2] = dcval;
- wsptr[DCTSIZE*3] = dcval;
-
- continue;
- }
-
- /* Even part */
-
- tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
- tmp0 <<= (CONST_BITS+1);
-
- z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
- z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
-
- tmp2 = MULTIPLY(z2, FIX_1_847759065) + MULTIPLY(z3, - FIX_0_765366865);
-
- tmp10 = tmp0 + tmp2;
- tmp12 = tmp0 - tmp2;
-
- /* Odd part */
-
- z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
- z2 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
- z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
- z4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
-
- tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */
- + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */
- + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */
- + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */
-
- tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */
- + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */
- + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */
- + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */
-
- /* Final output stage */
-
- wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp2, CONST_BITS-PASS1_BITS+1);
- wsptr[DCTSIZE*3] = (int) DESCALE(tmp10 - tmp2, CONST_BITS-PASS1_BITS+1);
- wsptr[DCTSIZE*1] = (int) DESCALE(tmp12 + tmp0, CONST_BITS-PASS1_BITS+1);
- wsptr[DCTSIZE*2] = (int) DESCALE(tmp12 - tmp0, CONST_BITS-PASS1_BITS+1);
- }
-
- /* Pass 2: process 4 rows from work array, store into output array. */
-
- wsptr = workspace;
- for (ctr = 0; ctr < 4; ctr++) {
- outptr = output_buf[ctr] + output_col;
- /* It's not clear whether a zero row test is worthwhile here ... */
-
-#ifndef NO_ZERO_ROW_TEST
- if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 &&
- wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) {
- /* AC terms all zero */
- JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3)
- & RANGE_MASK];
-
- outptr[0] = dcval;
- outptr[1] = dcval;
- outptr[2] = dcval;
- outptr[3] = dcval;
-
- wsptr += DCTSIZE; /* advance pointer to next row */
- continue;
- }
-#endif
-
- /* Even part */
-
- tmp0 = ((INT32) wsptr[0]) << (CONST_BITS+1);
-
- tmp2 = MULTIPLY((INT32) wsptr[2], FIX_1_847759065)
- + MULTIPLY((INT32) wsptr[6], - FIX_0_765366865);
-
- tmp10 = tmp0 + tmp2;
- tmp12 = tmp0 - tmp2;
-
- /* Odd part */
-
- z1 = (INT32) wsptr[7];
- z2 = (INT32) wsptr[5];
- z3 = (INT32) wsptr[3];
- z4 = (INT32) wsptr[1];
-
- tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */
- + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */
- + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */
- + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */
-
- tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */
- + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */
- + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */
- + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */
-
- /* Final output stage */
-
- outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp2,
- CONST_BITS+PASS1_BITS+3+1)
- & RANGE_MASK];
- outptr[3] = range_limit[(int) DESCALE(tmp10 - tmp2,
- CONST_BITS+PASS1_BITS+3+1)
- & RANGE_MASK];
- outptr[1] = range_limit[(int) DESCALE(tmp12 + tmp0,
- CONST_BITS+PASS1_BITS+3+1)
- & RANGE_MASK];
- outptr[2] = range_limit[(int) DESCALE(tmp12 - tmp0,
- CONST_BITS+PASS1_BITS+3+1)
- & RANGE_MASK];
-
- wsptr += DCTSIZE; /* advance pointer to next row */
- }
-}
-
-
-/*
- * Perform dequantization and inverse DCT on one block of coefficients,
- * producing a reduced-size 2x2 output block.
- */
-
-GLOBAL(void)
-jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block,
- JSAMPARRAY output_buf, JDIMENSION output_col)
-{
- INT32 tmp0, tmp10, z1;
- JCOEFPTR inptr;
- ISLOW_MULT_TYPE * quantptr;
- int * wsptr;
- JSAMPROW outptr;
- JSAMPLE *range_limit = IDCT_range_limit(cinfo);
- int ctr;
- int workspace[DCTSIZE*2]; /* buffers data between passes */
- SHIFT_TEMPS
-
- /* Pass 1: process columns from input, store into work array. */
-
- inptr = coef_block;
- quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
- wsptr = workspace;
- for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) {
- /* Don't bother to process columns 2,4,6 */
- if (ctr == DCTSIZE-2 || ctr == DCTSIZE-4 || ctr == DCTSIZE-6)
- continue;
- if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*3] == 0 &&
- inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*7] == 0) {
- /* AC terms all zero; we need not examine terms 2,4,6 for 2x2 output */
- int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS;
-
- wsptr[DCTSIZE*0] = dcval;
- wsptr[DCTSIZE*1] = dcval;
-
- continue;
- }
-
- /* Even part */
-
- z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
- tmp10 = z1 << (CONST_BITS+2);
-
- /* Odd part */
-
- z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
- tmp0 = MULTIPLY(z1, - FIX_0_720959822); /* sqrt(2) * (c7-c5+c3-c1) */
- z1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
- tmp0 += MULTIPLY(z1, FIX_0_850430095); /* sqrt(2) * (-c1+c3+c5+c7) */
- z1 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
- tmp0 += MULTIPLY(z1, - FIX_1_272758580); /* sqrt(2) * (-c1+c3-c5-c7) */
- z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
- tmp0 += MULTIPLY(z1, FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */
-
- /* Final output stage */
-
- wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp0, CONST_BITS-PASS1_BITS+2);
- wsptr[DCTSIZE*1] = (int) DESCALE(tmp10 - tmp0, CONST_BITS-PASS1_BITS+2);
- }
-
- /* Pass 2: process 2 rows from work array, store into output array. */
-
- wsptr = workspace;
- for (ctr = 0; ctr < 2; ctr++) {
- outptr = output_buf[ctr] + output_col;
- /* It's not clear whether a zero row test is worthwhile here ... */
-
-#ifndef NO_ZERO_ROW_TEST
- if (wsptr[1] == 0 && wsptr[3] == 0 && wsptr[5] == 0 && wsptr[7] == 0) {
- /* AC terms all zero */
- JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3)
- & RANGE_MASK];
-
- outptr[0] = dcval;
- outptr[1] = dcval;
-
- wsptr += DCTSIZE; /* advance pointer to next row */
- continue;
- }
-#endif
-
- /* Even part */
-
- tmp10 = ((INT32) wsptr[0]) << (CONST_BITS+2);
-
- /* Odd part */
-
- tmp0 = MULTIPLY((INT32) wsptr[7], - FIX_0_720959822) /* sqrt(2) * (c7-c5+c3-c1) */
- + MULTIPLY((INT32) wsptr[5], FIX_0_850430095) /* sqrt(2) * (-c1+c3+c5+c7) */
- + MULTIPLY((INT32) wsptr[3], - FIX_1_272758580) /* sqrt(2) * (-c1+c3-c5-c7) */
- + MULTIPLY((INT32) wsptr[1], FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */
-
- /* Final output stage */
-
- outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp0,
- CONST_BITS+PASS1_BITS+3+2)
- & RANGE_MASK];
- outptr[1] = range_limit[(int) DESCALE(tmp10 - tmp0,
- CONST_BITS+PASS1_BITS+3+2)
- & RANGE_MASK];
-
- wsptr += DCTSIZE; /* advance pointer to next row */
- }
-}
-
-
-/*
- * Perform dequantization and inverse DCT on one block of coefficients,
- * producing a reduced-size 1x1 output block.
- */
-
-GLOBAL(void)
-jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block,
- JSAMPARRAY output_buf, JDIMENSION output_col)
-{
- int dcval;
- ISLOW_MULT_TYPE * quantptr;
- JSAMPLE *range_limit = IDCT_range_limit(cinfo);
- SHIFT_TEMPS
-
- /* We hardly need an inverse DCT routine for this: just take the
- * average pixel value, which is one-eighth of the DC coefficient.
- */
- quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
- dcval = DEQUANTIZE(coef_block[0], quantptr[0]);
- dcval = (int) DESCALE((INT32) dcval, 3);
-
- output_buf[0][output_col] = range_limit[dcval & RANGE_MASK];
-}
-
-#endif /* IDCT_SCALING_SUPPORTED */
diff --git a/libjpegtwrp/jidctvenum.c b/libjpegtwrp/jidctvenum.c
deleted file mode 100644
index f458bb565..000000000
--- a/libjpegtwrp/jidctvenum.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * jidctvenum.c
- *
- * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials provided
- * with the distribution.
- * * Neither the name of Code Aurora Forum, Inc. nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdct.h" /* Private declarations for DCT subsystem */
-
-#ifdef ANDROID_JPEG_USE_VENUM
-/*
- * This module is specialized to the case DCTSIZE = 8.
- */
-#if DCTSIZE != 8
- Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
-#endif
-
-/* Dequantize a coefficient by multiplying it by the multiplier-table
- * entry; produce an int result. In this module, both inputs and result
- * are 16 bits or less, so either int or short multiply will work.
- */
-
-#define DEQUANTIZE(coef,quantval) ((coef) * ((INT16)quantval))
-
-GLOBAL(void)
-jpeg_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block,
- JSAMPARRAY output_buf, JDIMENSION output_col)
-{
- ISLOW_MULT_TYPE * quantptr;
- JCOEFPTR coefptr;
- int ctr;
-
- /* idct_out temp buffer is needed because output_buf sample allocation is 8 bits,
- * while IDCT output expects 16 bits.
- */
- INT16 idct_out[DCTSIZE2]; /* buffers data between passes */
- JSAMPROW outptr;
- INT16* idctptr;
-
- coefptr = coef_block;
- quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
-
- /* Dequantize the coeff buffer and write it back to the same location */
- for (ctr = DCTSIZE; ctr > 0; ctr--) {
- coefptr[0] = DEQUANTIZE(coefptr[0] , quantptr[0] );
- coefptr[DCTSIZE*1] = DEQUANTIZE(coefptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
- coefptr[DCTSIZE*2] = DEQUANTIZE(coefptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
- coefptr[DCTSIZE*3] = DEQUANTIZE(coefptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
- coefptr[DCTSIZE*4] = DEQUANTIZE(coefptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
- coefptr[DCTSIZE*5] = DEQUANTIZE(coefptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
- coefptr[DCTSIZE*6] = DEQUANTIZE(coefptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
- coefptr[DCTSIZE*7] = DEQUANTIZE(coefptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
-
- /* advance pointers to next column */
- quantptr++;
- coefptr++;
- }
-
- idct_8x8_venum((INT16*)coef_block,
- (INT16*)idct_out,
- DCTSIZE * sizeof(INT16));
-
- idctptr = idct_out;
- for (ctr = 0; ctr < DCTSIZE; ctr++) {
- outptr = output_buf[ctr] + output_col;
- // outptr sample size is 1 byte while idctptr sample size is 2 bytes
- outptr[0] = idctptr[0];
- outptr[1] = idctptr[1];
- outptr[2] = idctptr[2];
- outptr[3] = idctptr[3];
- outptr[4] = idctptr[4];
- outptr[5] = idctptr[5];
- outptr[6] = idctptr[6];
- outptr[7] = idctptr[7];
- idctptr += DCTSIZE; /* advance pointers to next row */
- }
-}
-
-GLOBAL(void)
-jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block,
- JSAMPARRAY output_buf, JDIMENSION output_col)
-{
- ISLOW_MULT_TYPE * quantptr;
- JSAMPROW outptr;
-
- /* Note: Must allocate 8x4 even though only 4x4 is used because
- * IDCT function expects stride of 8. Stride input to function is ignored.
- */
- INT16 idct_out[DCTSIZE * (DCTSIZE>>1)]; /* buffers data between passes */
- INT16* idctptr;
- JCOEFPTR coefptr;
- int ctr;
-
- coefptr = coef_block;
- quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
-
- /* Dequantize the coeff buffer and write it back to the same location */
- for (ctr = (DCTSIZE>>1); ctr > 0; ctr--) {
- coefptr[0] = DEQUANTIZE(coefptr[0] , quantptr[0] );
- coefptr[DCTSIZE*1] = DEQUANTIZE(coefptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
- coefptr[DCTSIZE*2] = DEQUANTIZE(coefptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
- coefptr[DCTSIZE*3] = DEQUANTIZE(coefptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
-
- /* advance pointers to next column */
- quantptr++;
- coefptr++;
- }
-
- idct_4x4_venum((INT16*)coef_block,
- (INT16*)idct_out,
- DCTSIZE * sizeof(INT16));
-
- idctptr = idct_out;
- for (ctr = 0; ctr < (DCTSIZE>>1); ctr++) {
- outptr = output_buf[ctr] + output_col;
-
- /* outptr sample size is 1 byte while idctptr sample size is 2 bytes */
- outptr[0] = idctptr[0];
- outptr[1] = idctptr[1];
- outptr[2] = idctptr[2];
- outptr[3] = idctptr[3];
- /* IDCT function assumes stride of 8 units */
- idctptr += (DCTSIZE); /* advance pointers to next row */
- }
-}
-
-GLOBAL(void)
-jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block,
- JSAMPARRAY output_buf, JDIMENSION output_col)
-{
- ISLOW_MULT_TYPE * quantptr;
- JSAMPROW outptr;
-
- /* Note: Must allocate 8x2 even though only 2x2 is used because
- * IDCT function expects stride of 8. Stride input to function is ignored.
- * There is also a hw limitation requiring input size to be 8x2.
- */
- INT16 idct_out[DCTSIZE * (DCTSIZE>>2)]; /* buffers data between passes */
- INT16* idctptr;
- JCOEFPTR coefptr;
- int ctr;
-
- coefptr = coef_block;
- quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
-
- /* Dequantize the coeff buffer and write it back to the same location */
- for (ctr = (DCTSIZE>>2); ctr > 0; ctr--) {
- coefptr[0] = DEQUANTIZE(coefptr[0] , quantptr[0] );
- coefptr[DCTSIZE*1] = DEQUANTIZE(coefptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
-
- /* advance pointers to next column */
- quantptr++;
- coefptr++;
- }
-
- idct_2x2_venum((INT16*)coef_block,
- (INT16*)idct_out,
- DCTSIZE * sizeof(INT16));
-
- idctptr = idct_out;
- for (ctr = 0; ctr < (DCTSIZE>>2); ctr++) {
- outptr = output_buf[ctr] + output_col;
-
- /* outptr sample size is 1 bytes, idctptr sample size is 2 bytes */
- outptr[0] = idctptr[0];
- outptr[1] = idctptr[1];
-
- /* IDCT function assumes stride of 8 units */
- idctptr += (DCTSIZE); /* advance pointers to next row */
- }
-}
-
-
-GLOBAL(void)
-jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block,
- JSAMPARRAY output_buf, JDIMENSION output_col)
-{
- ISLOW_MULT_TYPE * quantptr;
- JSAMPROW outptr; // 8-bit type
- INT16 idct_out[DCTSIZE]; /* Required to allocate 8 samples, even though we only use one. */
- JCOEFPTR coefptr;
- int ctr;
-
- coefptr = coef_block;
- quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
- outptr = output_buf[0] + output_col;
-
- /* Dequantize the coeff buffer and write it back to the same location */
- coefptr[0] = DEQUANTIZE(coefptr[0], quantptr[0]);
-
- idct_1x1_venum((INT16*)coef_block,
- (INT16*)idct_out,
- DCTSIZE * sizeof(INT16));
- outptr[0] = idct_out[0];
-}
-
-
-#endif /* ANDROID_JPEG_USE_VENUM */
diff --git a/libjpegtwrp/jinclude.h b/libjpegtwrp/jinclude.h
deleted file mode 100644
index 0a4f15146..000000000
--- a/libjpegtwrp/jinclude.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * jinclude.h
- *
- * Copyright (C) 1991-1994, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file exists to provide a single place to fix any problems with
- * including the wrong system include files. (Common problems are taken
- * care of by the standard jconfig symbols, but on really weird systems
- * you may have to edit this file.)
- *
- * NOTE: this file is NOT intended to be included by applications using the
- * JPEG library. Most applications need only include jpeglib.h.
- */
-
-
-/* Include auto-config file to find out which system include files we need. */
-
-#include "jconfig.h" /* auto configuration options */
-#define JCONFIG_INCLUDED /* so that jpeglib.h doesn't do it again */
-
-/*
- * We need the NULL macro and size_t typedef.
- * On an ANSI-conforming system it is sufficient to include <stddef.h>.
- * Otherwise, we get them from <stdlib.h> or <stdio.h>; we may have to
- * pull in <sys/types.h> as well.
- * Note that the core JPEG library does not require <stdio.h>;
- * only the default error handler and data source/destination modules do.
- * But we must pull it in because of the references to FILE in jpeglib.h.
- * You can remove those references if you want to compile without <stdio.h>.
- */
-
-#ifdef HAVE_STDDEF_H
-#include <stddef.h>
-#endif
-
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-
-#ifdef NEED_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-
-#include <stdio.h>
-
-/*
- * We need memory copying and zeroing functions, plus strncpy().
- * ANSI and System V implementations declare these in <string.h>.
- * BSD doesn't have the mem() functions, but it does have bcopy()/bzero().
- * Some systems may declare memset and memcpy in <memory.h>.
- *
- * NOTE: we assume the size parameters to these functions are of type size_t.
- * Change the casts in these macros if not!
- */
-
-#ifdef NEED_BSD_STRINGS
-
-#include <strings.h>
-#define MEMZERO(target,size) bzero((void *)(target), (size_t)(size))
-#define MEMCOPY(dest,src,size) bcopy((const void *)(src), (void *)(dest), (size_t)(size))
-
-#else /* not BSD, assume ANSI/SysV string lib */
-
-#include <string.h>
-#define MEMZERO(target,size) memset((void *)(target), 0, (size_t)(size))
-#define MEMCOPY(dest,src,size) memcpy((void *)(dest), (const void *)(src), (size_t)(size))
-
-#endif
-
-/*
- * In ANSI C, and indeed any rational implementation, size_t is also the
- * type returned by sizeof(). However, it seems there are some irrational
- * implementations out there, in which sizeof() returns an int even though
- * size_t is defined as long or unsigned long. To ensure consistent results
- * we always use this SIZEOF() macro in place of using sizeof() directly.
- */
-
-#define SIZEOF(object) ((size_t) sizeof(object))
-
-/*
- * The modules that use fread() and fwrite() always invoke them through
- * these macros. On some systems you may need to twiddle the argument casts.
- * CAUTION: argument order is different from underlying functions!
- */
-
-#define JFREAD(file,buf,sizeofbuf) \
- ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
-#define JFWRITE(file,buf,sizeofbuf) \
- ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
diff --git a/libjpegtwrp/jmem-android.c b/libjpegtwrp/jmem-android.c
deleted file mode 100644
index 5da4d0a6d..000000000
--- a/libjpegtwrp/jmem-android.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * Copyright (C) 2007-2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jmemsys.h" /* import the system-dependent declarations */
-
-#ifndef HAVE_STDLIB_H /* <stdlib.h> should declare malloc(),free() */
-extern void * malloc JPP((size_t size));
-extern void free JPP((void *ptr));
-#endif
-
-#ifndef SEEK_SET /* pre-ANSI systems may not define this; */
-#define SEEK_SET 0 /* if not, assume 0 is correct */
-#endif
-
-
-/*
- * Memory allocation and freeing are controlled by the regular library
- * routines malloc() and free().
- */
-
-GLOBAL(void *)
-jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
-{
- return (void *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
-{
- free(object);
-}
-
-
-/*
- * "Large" objects are treated the same as "small" ones.
- * NB: although we include FAR keywords in the routine declarations,
- * this file won't actually work in 80x86 small/medium model; at least,
- * you probably won't be able to process useful-size images in only 64KB.
- */
-
-GLOBAL(void FAR *)
-jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
-{
- return (void FAR *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
-{
- free(object);
-}
-
-
-/*
- * This routine computes the total memory space available for allocation.
- * It's impossible to do this in a portable way; our current solution is
- * to make the user tell us (with a default value set at compile time).
- * If you can actually get the available space, it's a good idea to subtract
- * a slop factor of 5% or so.
- */
-
-#ifndef DEFAULT_MAX_MEM /* so can override from makefile */
-#define DEFAULT_MAX_MEM 10000000L /* default: ten megabyte */
-#endif
-
-GLOBAL(long)
-jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
- long max_bytes_needed, long already_allocated)
-{
- return cinfo->mem->max_memory_to_use - already_allocated;
-}
-
-
-/*
- * Backing store (temporary file) management.
- * Backing store objects are only used when the value returned by
- * jpeg_mem_available is less than the total space needed. You can dispense
- * with these routines if you have plenty of virtual memory; see jmemnobs.c.
- */
-
-
-METHODDEF(void)
-read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- if (fseek(info->temp_file, file_offset, SEEK_SET))
- ERREXIT(cinfo, JERR_TFILE_SEEK);
- if (JFREAD(info->temp_file, buffer_address, byte_count)
- != (size_t) byte_count)
- ERREXIT(cinfo, JERR_TFILE_READ);
-}
-
-
-METHODDEF(void)
-write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- if (fseek(info->temp_file, file_offset, SEEK_SET))
- ERREXIT(cinfo, JERR_TFILE_SEEK);
- if (JFWRITE(info->temp_file, buffer_address, byte_count)
- != (size_t) byte_count)
- ERREXIT(cinfo, JERR_TFILE_WRITE);
-}
-
-
-METHODDEF(void)
-close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
-{
- fclose(info->temp_file);
- /* Since this implementation uses tmpfile() to create the file,
- * no explicit file deletion is needed.
- */
-}
-
-static FILE* getTempFileFromPath(const char * path) {
- FILE * fd = fopen(path, "w+");
- unlink(path);
- return fd;
-}
-
-static FILE* getTempFile() {
- char path[1024];
- snprintf(path, 1023, "/sdcard/.%d.tmp", getpid());
- FILE * fd = getTempFileFromPath(path);
- if (fd == NULL) {
- // anywhere else we can create a temp file?
- // snprintf(path, 1023, "/data/data/.%d.tmp", getpid());
- // fd = getTempFileFromPath(path);
- }
- return fd;
-}
-
-/*
- * Initial opening of a backing-store object.
- *
- * This version uses tmpfile(), which constructs a suitable file name
- * behind the scenes. We don't have to use info->temp_name[] at all;
- * indeed, we can't even find out the actual name of the temp file.
- */
-
-GLOBAL(void)
-jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- long total_bytes_needed)
-{
- if ((info->temp_file = getTempFile()) == NULL)
- ERREXITS(cinfo, JERR_TFILE_CREATE, "");
- info->read_backing_store = read_backing_store;
- info->write_backing_store = write_backing_store;
- info->close_backing_store = close_backing_store;
-}
-
-
-/*
- * These routines take care of any system-dependent initialization and
- * cleanup required.
- */
-
-GLOBAL(long)
-jpeg_mem_init (j_common_ptr cinfo)
-{
- return DEFAULT_MAX_MEM; /* default for max_memory_to_use */
-}
-
-GLOBAL(void)
-jpeg_mem_term (j_common_ptr cinfo)
-{
- /* no work */
-}
diff --git a/libjpegtwrp/jmem-ashmem.c b/libjpegtwrp/jmem-ashmem.c
deleted file mode 100644
index 3a17b02c3..000000000
--- a/libjpegtwrp/jmem-ashmem.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2007-2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jmemsys.h" /* import the system-dependent declarations */
-
-#include <cutils/ashmem.h>
-#include <unistd.h>
-#include <sys/mman.h>
-
-#ifndef HAVE_STDLIB_H /* <stdlib.h> should declare malloc(),free() */
-extern void * malloc JPP((size_t size));
-extern void free JPP((void *ptr));
-#endif
-
-/*
- * Memory allocation and freeing are controlled by the regular library
- * routines malloc() and free().
- */
-
-GLOBAL(void *)
-jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
-{
- return (void *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
-{
- free(object);
-}
-
-
-/*
- * "Large" objects are treated the same as "small" ones.
- * NB: although we include FAR keywords in the routine declarations,
- * this file won't actually work in 80x86 small/medium model; at least,
- * you probably won't be able to process useful-size images in only 64KB.
- */
-
-GLOBAL(void FAR *)
-jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
-{
- return (void FAR *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
-{
- free(object);
-}
-
-/*
- * This routine computes the total memory space available for allocation.
- * It's impossible to do this in a portable way; our current solution is
- * to make the user tell us (with a default value set at compile time).
- * If you can actually get the available space, it's a good idea to subtract
- * a slop factor of 5% or so.
- */
-
-#ifndef DEFAULT_MAX_MEM /* so can override from makefile */
-#define DEFAULT_MAX_MEM 10000000L /* default: ten megabyte */
-#endif
-
-GLOBAL(long)
-jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
- long max_bytes_needed, long already_allocated)
-{
- return cinfo->mem->max_memory_to_use - already_allocated;
-}
-
-
-/*
- * Backing store (temporary file) management.
- * Backing store objects are only used when the value returned by
- * jpeg_mem_available is less than the total space needed. You can dispense
- * with these routines if you have plenty of virtual memory; see jmemnobs.c.
- */
-
-METHODDEF(void)
-read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- memmove(buffer_address, info->addr + file_offset, byte_count);
-}
-
-
-METHODDEF(void)
-write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- memmove(info->addr + file_offset, buffer_address, byte_count);
-}
-
-
-METHODDEF(void)
-close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
-{
- munmap(info->addr, info->size);
- close(info->temp_file);
-}
-
-LOCAL(int)
-get_ashmem(backing_store_ptr info, long total_bytes_needed)
-{
- char path[1024];
- snprintf(path, 1023, "%d.tmp.ashmem", getpid());
- int fd = ashmem_create_region(path, total_bytes_needed);
- if (fd == -1) {
- return -1;
- }
- int err = ashmem_set_prot_region(fd, PROT_READ | PROT_WRITE);
- if (err) {
- return -1;
- }
- info->addr = mmap(NULL, total_bytes_needed, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0);
- info->size = total_bytes_needed;
- info->temp_file = fd;
- return fd;
-}
-
-/*
- * Initial opening of a backing-store object.
- * This version uses ashmem to get a shared memory of total-bytes_needed.
- */
-
-GLOBAL(void)
-jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- long total_bytes_needed)
-{
- if (get_ashmem(info, total_bytes_needed) == -1)
- ERREXITS(cinfo, JERR_TFILE_CREATE, "");
- info->read_backing_store = read_backing_store;
- info->write_backing_store = write_backing_store;
- info->close_backing_store = close_backing_store;
-}
-
-/*
- * These routines take care of any system-dependent initialization and
- * cleanup required.
- */
-
-GLOBAL(long)
-jpeg_mem_init (j_common_ptr cinfo)
-{
- return DEFAULT_MAX_MEM; /* default for max_memory_to_use */
-}
-
-GLOBAL(void)
-jpeg_mem_term (j_common_ptr cinfo)
-{
- /* no work */
-}
diff --git a/libjpegtwrp/jmemansi.c b/libjpegtwrp/jmemansi.c
deleted file mode 100644
index 2d93e4962..000000000
--- a/libjpegtwrp/jmemansi.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * jmemansi.c
- *
- * Copyright (C) 1992-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file provides a simple generic implementation of the system-
- * dependent portion of the JPEG memory manager. This implementation
- * assumes that you have the ANSI-standard library routine tmpfile().
- * Also, the problem of determining the amount of memory available
- * is shoved onto the user.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jmemsys.h" /* import the system-dependent declarations */
-
-#ifndef HAVE_STDLIB_H /* <stdlib.h> should declare malloc(),free() */
-extern void * malloc JPP((size_t size));
-extern void free JPP((void *ptr));
-#endif
-
-#ifndef SEEK_SET /* pre-ANSI systems may not define this; */
-#define SEEK_SET 0 /* if not, assume 0 is correct */
-#endif
-
-
-/*
- * Memory allocation and freeing are controlled by the regular library
- * routines malloc() and free().
- */
-
-GLOBAL(void *)
-jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
-{
- return (void *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
-{
- free(object);
-}
-
-
-/*
- * "Large" objects are treated the same as "small" ones.
- * NB: although we include FAR keywords in the routine declarations,
- * this file won't actually work in 80x86 small/medium model; at least,
- * you probably won't be able to process useful-size images in only 64KB.
- */
-
-GLOBAL(void FAR *)
-jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
-{
- return (void FAR *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
-{
- free(object);
-}
-
-
-/*
- * This routine computes the total memory space available for allocation.
- * It's impossible to do this in a portable way; our current solution is
- * to make the user tell us (with a default value set at compile time).
- * If you can actually get the available space, it's a good idea to subtract
- * a slop factor of 5% or so.
- */
-
-#ifndef DEFAULT_MAX_MEM /* so can override from makefile */
-#define DEFAULT_MAX_MEM 1000000L /* default: one megabyte */
-#endif
-
-GLOBAL(long)
-jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
- long max_bytes_needed, long already_allocated)
-{
- return cinfo->mem->max_memory_to_use - already_allocated;
-}
-
-
-/*
- * Backing store (temporary file) management.
- * Backing store objects are only used when the value returned by
- * jpeg_mem_available is less than the total space needed. You can dispense
- * with these routines if you have plenty of virtual memory; see jmemnobs.c.
- */
-
-
-METHODDEF(void)
-read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- if (fseek(info->temp_file, file_offset, SEEK_SET))
- ERREXIT(cinfo, JERR_TFILE_SEEK);
- if (JFREAD(info->temp_file, buffer_address, byte_count)
- != (size_t) byte_count)
- ERREXIT(cinfo, JERR_TFILE_READ);
-}
-
-
-METHODDEF(void)
-write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- if (fseek(info->temp_file, file_offset, SEEK_SET))
- ERREXIT(cinfo, JERR_TFILE_SEEK);
- if (JFWRITE(info->temp_file, buffer_address, byte_count)
- != (size_t) byte_count)
- ERREXIT(cinfo, JERR_TFILE_WRITE);
-}
-
-
-METHODDEF(void)
-close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
-{
- fclose(info->temp_file);
- /* Since this implementation uses tmpfile() to create the file,
- * no explicit file deletion is needed.
- */
-}
-
-
-/*
- * Initial opening of a backing-store object.
- *
- * This version uses tmpfile(), which constructs a suitable file name
- * behind the scenes. We don't have to use info->temp_name[] at all;
- * indeed, we can't even find out the actual name of the temp file.
- */
-
-GLOBAL(void)
-jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- long total_bytes_needed)
-{
- if ((info->temp_file = tmpfile()) == NULL)
- ERREXITS(cinfo, JERR_TFILE_CREATE, "");
- info->read_backing_store = read_backing_store;
- info->write_backing_store = write_backing_store;
- info->close_backing_store = close_backing_store;
-}
-
-
-/*
- * These routines take care of any system-dependent initialization and
- * cleanup required.
- */
-
-GLOBAL(long)
-jpeg_mem_init (j_common_ptr cinfo)
-{
- return DEFAULT_MAX_MEM; /* default for max_memory_to_use */
-}
-
-GLOBAL(void)
-jpeg_mem_term (j_common_ptr cinfo)
-{
- /* no work */
-}
diff --git a/libjpegtwrp/jmemdos.c b/libjpegtwrp/jmemdos.c
deleted file mode 100644
index 60b45c693..000000000
--- a/libjpegtwrp/jmemdos.c
+++ /dev/null
@@ -1,638 +0,0 @@
-/*
- * jmemdos.c
- *
- * Copyright (C) 1992-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file provides an MS-DOS-compatible implementation of the system-
- * dependent portion of the JPEG memory manager. Temporary data can be
- * stored in extended or expanded memory as well as in regular DOS files.
- *
- * If you use this file, you must be sure that NEED_FAR_POINTERS is defined
- * if you compile in a small-data memory model; it should NOT be defined if
- * you use a large-data memory model. This file is not recommended if you
- * are using a flat-memory-space 386 environment such as DJGCC or Watcom C.
- * Also, this code will NOT work if struct fields are aligned on greater than
- * 2-byte boundaries.
- *
- * Based on code contributed by Ge' Weijers.
- */
-
-/*
- * If you have both extended and expanded memory, you may want to change the
- * order in which they are tried in jopen_backing_store. On a 286 machine
- * expanded memory is usually faster, since extended memory access involves
- * an expensive protected-mode-and-back switch. On 386 and better, extended
- * memory is usually faster. As distributed, the code tries extended memory
- * first (what? not everyone has a 386? :-).
- *
- * You can disable use of extended/expanded memory entirely by altering these
- * definitions or overriding them from the Makefile (eg, -DEMS_SUPPORTED=0).
- */
-
-#ifndef XMS_SUPPORTED
-#define XMS_SUPPORTED 1
-#endif
-#ifndef EMS_SUPPORTED
-#define EMS_SUPPORTED 1
-#endif
-
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jmemsys.h" /* import the system-dependent declarations */
-
-#ifndef HAVE_STDLIB_H /* <stdlib.h> should declare these */
-extern void * malloc JPP((size_t size));
-extern void free JPP((void *ptr));
-extern char * getenv JPP((const char * name));
-#endif
-
-#ifdef NEED_FAR_POINTERS
-
-#ifdef __TURBOC__
-/* These definitions work for Borland C (Turbo C) */
-#include <alloc.h> /* need farmalloc(), farfree() */
-#define far_malloc(x) farmalloc(x)
-#define far_free(x) farfree(x)
-#else
-/* These definitions work for Microsoft C and compatible compilers */
-#include <malloc.h> /* need _fmalloc(), _ffree() */
-#define far_malloc(x) _fmalloc(x)
-#define far_free(x) _ffree(x)
-#endif
-
-#else /* not NEED_FAR_POINTERS */
-
-#define far_malloc(x) malloc(x)
-#define far_free(x) free(x)
-
-#endif /* NEED_FAR_POINTERS */
-
-#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */
-#define READ_BINARY "r"
-#else
-#define READ_BINARY "rb"
-#endif
-
-#ifndef USE_MSDOS_MEMMGR /* make sure user got configuration right */
- You forgot to define USE_MSDOS_MEMMGR in jconfig.h. /* deliberate syntax error */
-#endif
-
-#if MAX_ALLOC_CHUNK >= 65535L /* make sure jconfig.h got this right */
- MAX_ALLOC_CHUNK should be less than 64K. /* deliberate syntax error */
-#endif
-
-
-/*
- * Declarations for assembly-language support routines (see jmemdosa.asm).
- *
- * The functions are declared "far" as are all their pointer arguments;
- * this ensures the assembly source code will work regardless of the
- * compiler memory model. We assume "short" is 16 bits, "long" is 32.
- */
-
-typedef void far * XMSDRIVER; /* actually a pointer to code */
-typedef struct { /* registers for calling XMS driver */
- unsigned short ax, dx, bx;
- void far * ds_si;
- } XMScontext;
-typedef struct { /* registers for calling EMS driver */
- unsigned short ax, dx, bx;
- void far * ds_si;
- } EMScontext;
-
-extern short far jdos_open JPP((short far * handle, char far * filename));
-extern short far jdos_close JPP((short handle));
-extern short far jdos_seek JPP((short handle, long offset));
-extern short far jdos_read JPP((short handle, void far * buffer,
- unsigned short count));
-extern short far jdos_write JPP((short handle, void far * buffer,
- unsigned short count));
-extern void far jxms_getdriver JPP((XMSDRIVER far *));
-extern void far jxms_calldriver JPP((XMSDRIVER, XMScontext far *));
-extern short far jems_available JPP((void));
-extern void far jems_calldriver JPP((EMScontext far *));
-
-
-/*
- * Selection of a file name for a temporary file.
- * This is highly system-dependent, and you may want to customize it.
- */
-
-static int next_file_num; /* to distinguish among several temp files */
-
-LOCAL(void)
-select_file_name (char * fname)
-{
- const char * env;
- char * ptr;
- FILE * tfile;
-
- /* Keep generating file names till we find one that's not in use */
- for (;;) {
- /* Get temp directory name from environment TMP or TEMP variable;
- * if none, use "."
- */
- if ((env = (const char *) getenv("TMP")) == NULL)
- if ((env = (const char *) getenv("TEMP")) == NULL)
- env = ".";
- if (*env == '\0') /* null string means "." */
- env = ".";
- ptr = fname; /* copy name to fname */
- while (*env != '\0')
- *ptr++ = *env++;
- if (ptr[-1] != '\\' && ptr[-1] != '/')
- *ptr++ = '\\'; /* append backslash if not in env variable */
- /* Append a suitable file name */
- next_file_num++; /* advance counter */
- sprintf(ptr, "JPG%03d.TMP", next_file_num);
- /* Probe to see if file name is already in use */
- if ((tfile = fopen(fname, READ_BINARY)) == NULL)
- break;
- fclose(tfile); /* oops, it's there; close tfile & try again */
- }
-}
-
-
-/*
- * Near-memory allocation and freeing are controlled by the regular library
- * routines malloc() and free().
- */
-
-GLOBAL(void *)
-jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
-{
- return (void *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
-{
- free(object);
-}
-
-
-/*
- * "Large" objects are allocated in far memory, if possible
- */
-
-GLOBAL(void FAR *)
-jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
-{
- return (void FAR *) far_malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
-{
- far_free(object);
-}
-
-
-/*
- * This routine computes the total memory space available for allocation.
- * It's impossible to do this in a portable way; our current solution is
- * to make the user tell us (with a default value set at compile time).
- * If you can actually get the available space, it's a good idea to subtract
- * a slop factor of 5% or so.
- */
-
-#ifndef DEFAULT_MAX_MEM /* so can override from makefile */
-#define DEFAULT_MAX_MEM 300000L /* for total usage about 450K */
-#endif
-
-GLOBAL(long)
-jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
- long max_bytes_needed, long already_allocated)
-{
- return cinfo->mem->max_memory_to_use - already_allocated;
-}
-
-
-/*
- * Backing store (temporary file) management.
- * Backing store objects are only used when the value returned by
- * jpeg_mem_available is less than the total space needed. You can dispense
- * with these routines if you have plenty of virtual memory; see jmemnobs.c.
- */
-
-/*
- * For MS-DOS we support three types of backing storage:
- * 1. Conventional DOS files. We access these by direct DOS calls rather
- * than via the stdio package. This provides a bit better performance,
- * but the real reason is that the buffers to be read or written are FAR.
- * The stdio library for small-data memory models can't cope with that.
- * 2. Extended memory, accessed per the XMS V2.0 specification.
- * 3. Expanded memory, accessed per the LIM/EMS 4.0 specification.
- * You'll need copies of those specs to make sense of the related code.
- * The specs are available by Internet FTP from the SIMTEL archives
- * (oak.oakland.edu and its various mirror sites). See files
- * pub/msdos/microsoft/xms20.arc and pub/msdos/info/limems41.zip.
- */
-
-
-/*
- * Access methods for a DOS file.
- */
-
-
-METHODDEF(void)
-read_file_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- if (jdos_seek(info->handle.file_handle, file_offset))
- ERREXIT(cinfo, JERR_TFILE_SEEK);
- /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */
- if (byte_count > 65535L) /* safety check */
- ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK);
- if (jdos_read(info->handle.file_handle, buffer_address,
- (unsigned short) byte_count))
- ERREXIT(cinfo, JERR_TFILE_READ);
-}
-
-
-METHODDEF(void)
-write_file_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- if (jdos_seek(info->handle.file_handle, file_offset))
- ERREXIT(cinfo, JERR_TFILE_SEEK);
- /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */
- if (byte_count > 65535L) /* safety check */
- ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK);
- if (jdos_write(info->handle.file_handle, buffer_address,
- (unsigned short) byte_count))
- ERREXIT(cinfo, JERR_TFILE_WRITE);
-}
-
-
-METHODDEF(void)
-close_file_store (j_common_ptr cinfo, backing_store_ptr info)
-{
- jdos_close(info->handle.file_handle); /* close the file */
- remove(info->temp_name); /* delete the file */
-/* If your system doesn't have remove(), try unlink() instead.
- * remove() is the ANSI-standard name for this function, but
- * unlink() was more common in pre-ANSI systems.
- */
- TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name);
-}
-
-
-LOCAL(boolean)
-open_file_store (j_common_ptr cinfo, backing_store_ptr info,
- long total_bytes_needed)
-{
- short handle;
-
- select_file_name(info->temp_name);
- if (jdos_open((short far *) & handle, (char far *) info->temp_name)) {
- /* might as well exit since jpeg_open_backing_store will fail anyway */
- ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
- return FALSE;
- }
- info->handle.file_handle = handle;
- info->read_backing_store = read_file_store;
- info->write_backing_store = write_file_store;
- info->close_backing_store = close_file_store;
- TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name);
- return TRUE; /* succeeded */
-}
-
-
-/*
- * Access methods for extended memory.
- */
-
-#if XMS_SUPPORTED
-
-static XMSDRIVER xms_driver; /* saved address of XMS driver */
-
-typedef union { /* either long offset or real-mode pointer */
- long offset;
- void far * ptr;
- } XMSPTR;
-
-typedef struct { /* XMS move specification structure */
- long length;
- XMSH src_handle;
- XMSPTR src;
- XMSH dst_handle;
- XMSPTR dst;
- } XMSspec;
-
-#define ODD(X) (((X) & 1L) != 0)
-
-
-METHODDEF(void)
-read_xms_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- XMScontext ctx;
- XMSspec spec;
- char endbuffer[2];
-
- /* The XMS driver can't cope with an odd length, so handle the last byte
- * specially if byte_count is odd. We don't expect this to be common.
- */
-
- spec.length = byte_count & (~ 1L);
- spec.src_handle = info->handle.xms_handle;
- spec.src.offset = file_offset;
- spec.dst_handle = 0;
- spec.dst.ptr = buffer_address;
-
- ctx.ds_si = (void far *) & spec;
- ctx.ax = 0x0b00; /* EMB move */
- jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
- if (ctx.ax != 1)
- ERREXIT(cinfo, JERR_XMS_READ);
-
- if (ODD(byte_count)) {
- read_xms_store(cinfo, info, (void FAR *) endbuffer,
- file_offset + byte_count - 1L, 2L);
- ((char FAR *) buffer_address)[byte_count - 1L] = endbuffer[0];
- }
-}
-
-
-METHODDEF(void)
-write_xms_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- XMScontext ctx;
- XMSspec spec;
- char endbuffer[2];
-
- /* The XMS driver can't cope with an odd length, so handle the last byte
- * specially if byte_count is odd. We don't expect this to be common.
- */
-
- spec.length = byte_count & (~ 1L);
- spec.src_handle = 0;
- spec.src.ptr = buffer_address;
- spec.dst_handle = info->handle.xms_handle;
- spec.dst.offset = file_offset;
-
- ctx.ds_si = (void far *) & spec;
- ctx.ax = 0x0b00; /* EMB move */
- jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
- if (ctx.ax != 1)
- ERREXIT(cinfo, JERR_XMS_WRITE);
-
- if (ODD(byte_count)) {
- read_xms_store(cinfo, info, (void FAR *) endbuffer,
- file_offset + byte_count - 1L, 2L);
- endbuffer[0] = ((char FAR *) buffer_address)[byte_count - 1L];
- write_xms_store(cinfo, info, (void FAR *) endbuffer,
- file_offset + byte_count - 1L, 2L);
- }
-}
-
-
-METHODDEF(void)
-close_xms_store (j_common_ptr cinfo, backing_store_ptr info)
-{
- XMScontext ctx;
-
- ctx.dx = info->handle.xms_handle;
- ctx.ax = 0x0a00;
- jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
- TRACEMS1(cinfo, 1, JTRC_XMS_CLOSE, info->handle.xms_handle);
- /* we ignore any error return from the driver */
-}
-
-
-LOCAL(boolean)
-open_xms_store (j_common_ptr cinfo, backing_store_ptr info,
- long total_bytes_needed)
-{
- XMScontext ctx;
-
- /* Get address of XMS driver */
- jxms_getdriver((XMSDRIVER far *) & xms_driver);
- if (xms_driver == NULL)
- return FALSE; /* no driver to be had */
-
- /* Get version number, must be >= 2.00 */
- ctx.ax = 0x0000;
- jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
- if (ctx.ax < (unsigned short) 0x0200)
- return FALSE;
-
- /* Try to get space (expressed in kilobytes) */
- ctx.dx = (unsigned short) ((total_bytes_needed + 1023L) >> 10);
- ctx.ax = 0x0900;
- jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
- if (ctx.ax != 1)
- return FALSE;
-
- /* Succeeded, save the handle and away we go */
- info->handle.xms_handle = ctx.dx;
- info->read_backing_store = read_xms_store;
- info->write_backing_store = write_xms_store;
- info->close_backing_store = close_xms_store;
- TRACEMS1(cinfo, 1, JTRC_XMS_OPEN, ctx.dx);
- return TRUE; /* succeeded */
-}
-
-#endif /* XMS_SUPPORTED */
-
-
-/*
- * Access methods for expanded memory.
- */
-
-#if EMS_SUPPORTED
-
-/* The EMS move specification structure requires word and long fields aligned
- * at odd byte boundaries. Some compilers will align struct fields at even
- * byte boundaries. While it's usually possible to force byte alignment,
- * that causes an overall performance penalty and may pose problems in merging
- * JPEG into a larger application. Instead we accept some rather dirty code
- * here. Note this code would fail if the hardware did not allow odd-byte
- * word & long accesses, but all 80x86 CPUs do.
- */
-
-typedef void far * EMSPTR;
-
-typedef union { /* EMS move specification structure */
- long length; /* It's easy to access first 4 bytes */
- char bytes[18]; /* Misaligned fields in here! */
- } EMSspec;
-
-/* Macros for accessing misaligned fields */
-#define FIELD_AT(spec,offset,type) (*((type *) &(spec.bytes[offset])))
-#define SRC_TYPE(spec) FIELD_AT(spec,4,char)
-#define SRC_HANDLE(spec) FIELD_AT(spec,5,EMSH)
-#define SRC_OFFSET(spec) FIELD_AT(spec,7,unsigned short)
-#define SRC_PAGE(spec) FIELD_AT(spec,9,unsigned short)
-#define SRC_PTR(spec) FIELD_AT(spec,7,EMSPTR)
-#define DST_TYPE(spec) FIELD_AT(spec,11,char)
-#define DST_HANDLE(spec) FIELD_AT(spec,12,EMSH)
-#define DST_OFFSET(spec) FIELD_AT(spec,14,unsigned short)
-#define DST_PAGE(spec) FIELD_AT(spec,16,unsigned short)
-#define DST_PTR(spec) FIELD_AT(spec,14,EMSPTR)
-
-#define EMSPAGESIZE 16384L /* gospel, see the EMS specs */
-
-#define HIBYTE(W) (((W) >> 8) & 0xFF)
-#define LOBYTE(W) ((W) & 0xFF)
-
-
-METHODDEF(void)
-read_ems_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- EMScontext ctx;
- EMSspec spec;
-
- spec.length = byte_count;
- SRC_TYPE(spec) = 1;
- SRC_HANDLE(spec) = info->handle.ems_handle;
- SRC_PAGE(spec) = (unsigned short) (file_offset / EMSPAGESIZE);
- SRC_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE);
- DST_TYPE(spec) = 0;
- DST_HANDLE(spec) = 0;
- DST_PTR(spec) = buffer_address;
-
- ctx.ds_si = (void far *) & spec;
- ctx.ax = 0x5700; /* move memory region */
- jems_calldriver((EMScontext far *) & ctx);
- if (HIBYTE(ctx.ax) != 0)
- ERREXIT(cinfo, JERR_EMS_READ);
-}
-
-
-METHODDEF(void)
-write_ems_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- EMScontext ctx;
- EMSspec spec;
-
- spec.length = byte_count;
- SRC_TYPE(spec) = 0;
- SRC_HANDLE(spec) = 0;
- SRC_PTR(spec) = buffer_address;
- DST_TYPE(spec) = 1;
- DST_HANDLE(spec) = info->handle.ems_handle;
- DST_PAGE(spec) = (unsigned short) (file_offset / EMSPAGESIZE);
- DST_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE);
-
- ctx.ds_si = (void far *) & spec;
- ctx.ax = 0x5700; /* move memory region */
- jems_calldriver((EMScontext far *) & ctx);
- if (HIBYTE(ctx.ax) != 0)
- ERREXIT(cinfo, JERR_EMS_WRITE);
-}
-
-
-METHODDEF(void)
-close_ems_store (j_common_ptr cinfo, backing_store_ptr info)
-{
- EMScontext ctx;
-
- ctx.ax = 0x4500;
- ctx.dx = info->handle.ems_handle;
- jems_calldriver((EMScontext far *) & ctx);
- TRACEMS1(cinfo, 1, JTRC_EMS_CLOSE, info->handle.ems_handle);
- /* we ignore any error return from the driver */
-}
-
-
-LOCAL(boolean)
-open_ems_store (j_common_ptr cinfo, backing_store_ptr info,
- long total_bytes_needed)
-{
- EMScontext ctx;
-
- /* Is EMS driver there? */
- if (! jems_available())
- return FALSE;
-
- /* Get status, make sure EMS is OK */
- ctx.ax = 0x4000;
- jems_calldriver((EMScontext far *) & ctx);
- if (HIBYTE(ctx.ax) != 0)
- return FALSE;
-
- /* Get version, must be >= 4.0 */
- ctx.ax = 0x4600;
- jems_calldriver((EMScontext far *) & ctx);
- if (HIBYTE(ctx.ax) != 0 || LOBYTE(ctx.ax) < 0x40)
- return FALSE;
-
- /* Try to allocate requested space */
- ctx.ax = 0x4300;
- ctx.bx = (unsigned short) ((total_bytes_needed + EMSPAGESIZE-1L) / EMSPAGESIZE);
- jems_calldriver((EMScontext far *) & ctx);
- if (HIBYTE(ctx.ax) != 0)
- return FALSE;
-
- /* Succeeded, save the handle and away we go */
- info->handle.ems_handle = ctx.dx;
- info->read_backing_store = read_ems_store;
- info->write_backing_store = write_ems_store;
- info->close_backing_store = close_ems_store;
- TRACEMS1(cinfo, 1, JTRC_EMS_OPEN, ctx.dx);
- return TRUE; /* succeeded */
-}
-
-#endif /* EMS_SUPPORTED */
-
-
-/*
- * Initial opening of a backing-store object.
- */
-
-GLOBAL(void)
-jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- long total_bytes_needed)
-{
- /* Try extended memory, then expanded memory, then regular file. */
-#if XMS_SUPPORTED
- if (open_xms_store(cinfo, info, total_bytes_needed))
- return;
-#endif
-#if EMS_SUPPORTED
- if (open_ems_store(cinfo, info, total_bytes_needed))
- return;
-#endif
- if (open_file_store(cinfo, info, total_bytes_needed))
- return;
- ERREXITS(cinfo, JERR_TFILE_CREATE, "");
-}
-
-
-/*
- * These routines take care of any system-dependent initialization and
- * cleanup required.
- */
-
-GLOBAL(long)
-jpeg_mem_init (j_common_ptr cinfo)
-{
- next_file_num = 0; /* initialize temp file name generator */
- return DEFAULT_MAX_MEM; /* default for max_memory_to_use */
-}
-
-GLOBAL(void)
-jpeg_mem_term (j_common_ptr cinfo)
-{
- /* Microsoft C, at least in v6.00A, will not successfully reclaim freed
- * blocks of size > 32Kbytes unless we give it a kick in the rear, like so:
- */
-#ifdef NEED_FHEAPMIN
- _fheapmin();
-#endif
-}
diff --git a/libjpegtwrp/jmemdosa.asm b/libjpegtwrp/jmemdosa.asm
deleted file mode 100644
index ecd43729f..000000000
--- a/libjpegtwrp/jmemdosa.asm
+++ /dev/null
@@ -1,379 +0,0 @@
-;
-; jmemdosa.asm
-;
-; Copyright (C) 1992, Thomas G. Lane.
-; This file is part of the Independent JPEG Group's software.
-; For conditions of distribution and use, see the accompanying README file.
-;
-; This file contains low-level interface routines to support the MS-DOS
-; backing store manager (jmemdos.c). Routines are provided to access disk
-; files through direct DOS calls, and to access XMS and EMS drivers.
-;
-; This file should assemble with Microsoft's MASM or any compatible
-; assembler (including Borland's Turbo Assembler). If you haven't got
-; a compatible assembler, better fall back to jmemansi.c or jmemname.c.
-;
-; To minimize dependence on the C compiler's register usage conventions,
-; we save and restore all 8086 registers, even though most compilers only
-; require SI,DI,DS to be preserved. Also, we use only 16-bit-wide return
-; values, which everybody returns in AX.
-;
-; Based on code contributed by Ge' Weijers.
-;
-
-JMEMDOSA_TXT segment byte public 'CODE'
-
- assume cs:JMEMDOSA_TXT
-
- public _jdos_open
- public _jdos_close
- public _jdos_seek
- public _jdos_read
- public _jdos_write
- public _jxms_getdriver
- public _jxms_calldriver
- public _jems_available
- public _jems_calldriver
-
-;
-; short far jdos_open (short far * handle, char far * filename)
-;
-; Create and open a temporary file
-;
-_jdos_open proc far
- push bp ; linkage
- mov bp,sp
- push si ; save all registers for safety
- push di
- push bx
- push cx
- push dx
- push es
- push ds
- mov cx,0 ; normal file attributes
- lds dx,dword ptr [bp+10] ; get filename pointer
- mov ah,3ch ; create file
- int 21h
- jc open_err ; if failed, return error code
- lds bx,dword ptr [bp+6] ; get handle pointer
- mov word ptr [bx],ax ; save the handle
- xor ax,ax ; return zero for OK
-open_err: pop ds ; restore registers and exit
- pop es
- pop dx
- pop cx
- pop bx
- pop di
- pop si
- pop bp
- ret
-_jdos_open endp
-
-
-;
-; short far jdos_close (short handle)
-;
-; Close the file handle
-;
-_jdos_close proc far
- push bp ; linkage
- mov bp,sp
- push si ; save all registers for safety
- push di
- push bx
- push cx
- push dx
- push es
- push ds
- mov bx,word ptr [bp+6] ; file handle
- mov ah,3eh ; close file
- int 21h
- jc close_err ; if failed, return error code
- xor ax,ax ; return zero for OK
-close_err: pop ds ; restore registers and exit
- pop es
- pop dx
- pop cx
- pop bx
- pop di
- pop si
- pop bp
- ret
-_jdos_close endp
-
-
-;
-; short far jdos_seek (short handle, long offset)
-;
-; Set file position
-;
-_jdos_seek proc far
- push bp ; linkage
- mov bp,sp
- push si ; save all registers for safety
- push di
- push bx
- push cx
- push dx
- push es
- push ds
- mov bx,word ptr [bp+6] ; file handle
- mov dx,word ptr [bp+8] ; LS offset
- mov cx,word ptr [bp+10] ; MS offset
- mov ax,4200h ; absolute seek
- int 21h
- jc seek_err ; if failed, return error code
- xor ax,ax ; return zero for OK
-seek_err: pop ds ; restore registers and exit
- pop es
- pop dx
- pop cx
- pop bx
- pop di
- pop si
- pop bp
- ret
-_jdos_seek endp
-
-
-;
-; short far jdos_read (short handle, void far * buffer, unsigned short count)
-;
-; Read from file
-;
-_jdos_read proc far
- push bp ; linkage
- mov bp,sp
- push si ; save all registers for safety
- push di
- push bx
- push cx
- push dx
- push es
- push ds
- mov bx,word ptr [bp+6] ; file handle
- lds dx,dword ptr [bp+8] ; buffer address
- mov cx,word ptr [bp+12] ; number of bytes
- mov ah,3fh ; read file
- int 21h
- jc read_err ; if failed, return error code
- cmp ax,word ptr [bp+12] ; make sure all bytes were read
- je read_ok
- mov ax,1 ; else return 1 for not OK
- jmp short read_err
-read_ok: xor ax,ax ; return zero for OK
-read_err: pop ds ; restore registers and exit
- pop es
- pop dx
- pop cx
- pop bx
- pop di
- pop si
- pop bp
- ret
-_jdos_read endp
-
-
-;
-; short far jdos_write (short handle, void far * buffer, unsigned short count)
-;
-; Write to file
-;
-_jdos_write proc far
- push bp ; linkage
- mov bp,sp
- push si ; save all registers for safety
- push di
- push bx
- push cx
- push dx
- push es
- push ds
- mov bx,word ptr [bp+6] ; file handle
- lds dx,dword ptr [bp+8] ; buffer address
- mov cx,word ptr [bp+12] ; number of bytes
- mov ah,40h ; write file
- int 21h
- jc write_err ; if failed, return error code
- cmp ax,word ptr [bp+12] ; make sure all bytes written
- je write_ok
- mov ax,1 ; else return 1 for not OK
- jmp short write_err
-write_ok: xor ax,ax ; return zero for OK
-write_err: pop ds ; restore registers and exit
- pop es
- pop dx
- pop cx
- pop bx
- pop di
- pop si
- pop bp
- ret
-_jdos_write endp
-
-
-;
-; void far jxms_getdriver (XMSDRIVER far *)
-;
-; Get the address of the XMS driver, or NULL if not available
-;
-_jxms_getdriver proc far
- push bp ; linkage
- mov bp,sp
- push si ; save all registers for safety
- push di
- push bx
- push cx
- push dx
- push es
- push ds
- mov ax,4300h ; call multiplex interrupt with
- int 2fh ; a magic cookie, hex 4300
- cmp al,80h ; AL should contain hex 80
- je xmsavail
- xor dx,dx ; no XMS driver available
- xor ax,ax ; return a nil pointer
- jmp short xmsavail_done
-xmsavail: mov ax,4310h ; fetch driver address with
- int 2fh ; another magic cookie
- mov dx,es ; copy address to dx:ax
- mov ax,bx
-xmsavail_done: les bx,dword ptr [bp+6] ; get pointer to return value
- mov word ptr es:[bx],ax
- mov word ptr es:[bx+2],dx
- pop ds ; restore registers and exit
- pop es
- pop dx
- pop cx
- pop bx
- pop di
- pop si
- pop bp
- ret
-_jxms_getdriver endp
-
-
-;
-; void far jxms_calldriver (XMSDRIVER, XMScontext far *)
-;
-; The XMScontext structure contains values for the AX,DX,BX,SI,DS registers.
-; These are loaded, the XMS call is performed, and the new values of the
-; AX,DX,BX registers are written back to the context structure.
-;
-_jxms_calldriver proc far
- push bp ; linkage
- mov bp,sp
- push si ; save all registers for safety
- push di
- push bx
- push cx
- push dx
- push es
- push ds
- les bx,dword ptr [bp+10] ; get XMScontext pointer
- mov ax,word ptr es:[bx] ; load registers
- mov dx,word ptr es:[bx+2]
- mov si,word ptr es:[bx+6]
- mov ds,word ptr es:[bx+8]
- mov bx,word ptr es:[bx+4]
- call dword ptr [bp+6] ; call the driver
- mov cx,bx ; save returned BX for a sec
- les bx,dword ptr [bp+10] ; get XMScontext pointer
- mov word ptr es:[bx],ax ; put back ax,dx,bx
- mov word ptr es:[bx+2],dx
- mov word ptr es:[bx+4],cx
- pop ds ; restore registers and exit
- pop es
- pop dx
- pop cx
- pop bx
- pop di
- pop si
- pop bp
- ret
-_jxms_calldriver endp
-
-
-;
-; short far jems_available (void)
-;
-; Have we got an EMS driver? (this comes straight from the EMS 4.0 specs)
-;
-_jems_available proc far
- push si ; save all registers for safety
- push di
- push bx
- push cx
- push dx
- push es
- push ds
- mov ax,3567h ; get interrupt vector 67h
- int 21h
- push cs
- pop ds
- mov di,000ah ; check offs 10 in returned seg
- lea si,ASCII_device_name ; against literal string
- mov cx,8
- cld
- repe cmpsb
- jne no_ems
- mov ax,1 ; match, it's there
- jmp short avail_done
-no_ems: xor ax,ax ; it's not there
-avail_done: pop ds ; restore registers and exit
- pop es
- pop dx
- pop cx
- pop bx
- pop di
- pop si
- ret
-
-ASCII_device_name db "EMMXXXX0"
-
-_jems_available endp
-
-
-;
-; void far jems_calldriver (EMScontext far *)
-;
-; The EMScontext structure contains values for the AX,DX,BX,SI,DS registers.
-; These are loaded, the EMS trap is performed, and the new values of the
-; AX,DX,BX registers are written back to the context structure.
-;
-_jems_calldriver proc far
- push bp ; linkage
- mov bp,sp
- push si ; save all registers for safety
- push di
- push bx
- push cx
- push dx
- push es
- push ds
- les bx,dword ptr [bp+6] ; get EMScontext pointer
- mov ax,word ptr es:[bx] ; load registers
- mov dx,word ptr es:[bx+2]
- mov si,word ptr es:[bx+6]
- mov ds,word ptr es:[bx+8]
- mov bx,word ptr es:[bx+4]
- int 67h ; call the EMS driver
- mov cx,bx ; save returned BX for a sec
- les bx,dword ptr [bp+6] ; get EMScontext pointer
- mov word ptr es:[bx],ax ; put back ax,dx,bx
- mov word ptr es:[bx+2],dx
- mov word ptr es:[bx+4],cx
- pop ds ; restore registers and exit
- pop es
- pop dx
- pop cx
- pop bx
- pop di
- pop si
- pop bp
- ret
-_jems_calldriver endp
-
-JMEMDOSA_TXT ends
-
- end
diff --git a/libjpegtwrp/jmemmac.c b/libjpegtwrp/jmemmac.c
deleted file mode 100644
index 106f9bea0..000000000
--- a/libjpegtwrp/jmemmac.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * jmemmac.c
- *
- * Copyright (C) 1992-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * jmemmac.c provides an Apple Macintosh implementation of the system-
- * dependent portion of the JPEG memory manager.
- *
- * If you use jmemmac.c, then you must define USE_MAC_MEMMGR in the
- * JPEG_INTERNALS part of jconfig.h.
- *
- * jmemmac.c uses the Macintosh toolbox routines NewPtr and DisposePtr
- * instead of malloc and free. It accurately determines the amount of
- * memory available by using CompactMem. Notice that if left to its
- * own devices, this code can chew up all available space in the
- * application's zone, with the exception of the rather small "slop"
- * factor computed in jpeg_mem_available(). The application can ensure
- * that more space is left over by reducing max_memory_to_use.
- *
- * Large images are swapped to disk using temporary files and System 7.0+'s
- * temporary folder functionality.
- *
- * Note that jmemmac.c depends on two features of MacOS that were first
- * introduced in System 7: FindFolder and the FSSpec-based calls.
- * If your application uses jmemmac.c and is run under System 6 or earlier,
- * and the jpeg library decides it needs a temporary file, it will abort,
- * printing error messages about requiring System 7. (If no temporary files
- * are created, it will run fine.)
- *
- * If you want to use jmemmac.c in an application that might be used with
- * System 6 or earlier, then you should remove dependencies on FindFolder
- * and the FSSpec calls. You will need to replace FindFolder with some
- * other mechanism for finding a place to put temporary files, and you
- * should replace the FSSpec calls with their HFS equivalents:
- *
- * FSpDelete -> HDelete
- * FSpGetFInfo -> HGetFInfo
- * FSpCreate -> HCreate
- * FSpOpenDF -> HOpen *** Note: not HOpenDF ***
- * FSMakeFSSpec -> (fill in spec by hand.)
- *
- * (Use HOpen instead of HOpenDF. HOpen is just a glue-interface to PBHOpen,
- * which is on all HFS macs. HOpenDF is a System 7 addition which avoids the
- * ages-old problem of names starting with a period.)
- *
- * Contributed by Sam Bushell (jsam@iagu.on.net) and
- * Dan Gildor (gyld@in-touch.com).
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jmemsys.h" /* import the system-dependent declarations */
-
-#ifndef USE_MAC_MEMMGR /* make sure user got configuration right */
- You forgot to define USE_MAC_MEMMGR in jconfig.h. /* deliberate syntax error */
-#endif
-
-#include <Memory.h> /* we use the MacOS memory manager */
-#include <Files.h> /* we use the MacOS File stuff */
-#include <Folders.h> /* we use the MacOS HFS stuff */
-#include <Script.h> /* for smSystemScript */
-#include <Gestalt.h> /* we use Gestalt to test for specific functionality */
-
-#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */
-#define TEMP_FILE_NAME "JPG%03d.TMP"
-#endif
-
-static int next_file_num; /* to distinguish among several temp files */
-
-
-/*
- * Memory allocation and freeing are controlled by the MacOS library
- * routines NewPtr() and DisposePtr(), which allocate fixed-address
- * storage. Unfortunately, the IJG library isn't smart enough to cope
- * with relocatable storage.
- */
-
-GLOBAL(void *)
-jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
-{
- return (void *) NewPtr(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
-{
- DisposePtr((Ptr) object);
-}
-
-
-/*
- * "Large" objects are treated the same as "small" ones.
- * NB: we include FAR keywords in the routine declarations simply for
- * consistency with the rest of the IJG code; FAR should expand to empty
- * on rational architectures like the Mac.
- */
-
-GLOBAL(void FAR *)
-jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
-{
- return (void FAR *) NewPtr(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
-{
- DisposePtr((Ptr) object);
-}
-
-
-/*
- * This routine computes the total memory space available for allocation.
- */
-
-GLOBAL(long)
-jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
- long max_bytes_needed, long already_allocated)
-{
- long limit = cinfo->mem->max_memory_to_use - already_allocated;
- long slop, mem;
-
- /* Don't ask for more than what application has told us we may use */
- if (max_bytes_needed > limit && limit > 0)
- max_bytes_needed = limit;
- /* Find whether there's a big enough free block in the heap.
- * CompactMem tries to create a contiguous block of the requested size,
- * and then returns the size of the largest free block (which could be
- * much more or much less than we asked for).
- * We add some slop to ensure we don't use up all available memory.
- */
- slop = max_bytes_needed / 16 + 32768L;
- mem = CompactMem(max_bytes_needed + slop) - slop;
- if (mem < 0)
- mem = 0; /* sigh, couldn't even get the slop */
- /* Don't take more than the application says we can have */
- if (mem > limit && limit > 0)
- mem = limit;
- return mem;
-}
-
-
-/*
- * Backing store (temporary file) management.
- * Backing store objects are only used when the value returned by
- * jpeg_mem_available is less than the total space needed. You can dispense
- * with these routines if you have plenty of virtual memory; see jmemnobs.c.
- */
-
-
-METHODDEF(void)
-read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- long bytes = byte_count;
- long retVal;
-
- if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr )
- ERREXIT(cinfo, JERR_TFILE_SEEK);
-
- retVal = FSRead ( info->temp_file, &bytes,
- (unsigned char *) buffer_address );
- if ( retVal != noErr || bytes != byte_count )
- ERREXIT(cinfo, JERR_TFILE_READ);
-}
-
-
-METHODDEF(void)
-write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- long bytes = byte_count;
- long retVal;
-
- if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr )
- ERREXIT(cinfo, JERR_TFILE_SEEK);
-
- retVal = FSWrite ( info->temp_file, &bytes,
- (unsigned char *) buffer_address );
- if ( retVal != noErr || bytes != byte_count )
- ERREXIT(cinfo, JERR_TFILE_WRITE);
-}
-
-
-METHODDEF(void)
-close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
-{
- FSClose ( info->temp_file );
- FSpDelete ( &(info->tempSpec) );
-}
-
-
-/*
- * Initial opening of a backing-store object.
- *
- * This version uses FindFolder to find the Temporary Items folder,
- * and puts the temporary file in there.
- */
-
-GLOBAL(void)
-jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- long total_bytes_needed)
-{
- short tmpRef, vRefNum;
- long dirID;
- FInfo finderInfo;
- FSSpec theSpec;
- Str255 fName;
- OSErr osErr;
- long gestaltResponse = 0;
-
- /* Check that FSSpec calls are available. */
- osErr = Gestalt( gestaltFSAttr, &gestaltResponse );
- if ( ( osErr != noErr )
- || !( gestaltResponse & (1<<gestaltHasFSSpecCalls) ) )
- ERREXITS(cinfo, JERR_TFILE_CREATE, "- System 7.0 or later required");
- /* TO DO: add a proper error message to jerror.h. */
-
- /* Check that FindFolder is available. */
- osErr = Gestalt( gestaltFindFolderAttr, &gestaltResponse );
- if ( ( osErr != noErr )
- || !( gestaltResponse & (1<<gestaltFindFolderPresent) ) )
- ERREXITS(cinfo, JERR_TFILE_CREATE, "- System 7.0 or later required.");
- /* TO DO: add a proper error message to jerror.h. */
-
- osErr = FindFolder ( kOnSystemDisk, kTemporaryFolderType, kCreateFolder,
- &vRefNum, &dirID );
- if ( osErr != noErr )
- ERREXITS(cinfo, JERR_TFILE_CREATE, "- temporary items folder unavailable");
- /* TO DO: Try putting the temp files somewhere else. */
-
- /* Keep generating file names till we find one that's not in use */
- for (;;) {
- next_file_num++; /* advance counter */
-
- sprintf(info->temp_name, TEMP_FILE_NAME, next_file_num);
- strcpy ( (Ptr)fName+1, info->temp_name );
- *fName = strlen (info->temp_name);
- osErr = FSMakeFSSpec ( vRefNum, dirID, fName, &theSpec );
-
- if ( (osErr = FSpGetFInfo ( &theSpec, &finderInfo ) ) != noErr )
- break;
- }
-
- osErr = FSpCreate ( &theSpec, '????', '????', smSystemScript );
- if ( osErr != noErr )
- ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
-
- osErr = FSpOpenDF ( &theSpec, fsRdWrPerm, &(info->temp_file) );
- if ( osErr != noErr )
- ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
-
- info->tempSpec = theSpec;
-
- info->read_backing_store = read_backing_store;
- info->write_backing_store = write_backing_store;
- info->close_backing_store = close_backing_store;
- TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name);
-}
-
-
-/*
- * These routines take care of any system-dependent initialization and
- * cleanup required.
- */
-
-GLOBAL(long)
-jpeg_mem_init (j_common_ptr cinfo)
-{
- next_file_num = 0;
-
- /* max_memory_to_use will be initialized to FreeMem()'s result;
- * the calling application might later reduce it, for example
- * to leave room to invoke multiple JPEG objects.
- * Note that FreeMem returns the total number of free bytes;
- * it may not be possible to allocate a single block of this size.
- */
- return FreeMem();
-}
-
-GLOBAL(void)
-jpeg_mem_term (j_common_ptr cinfo)
-{
- /* no work */
-}
diff --git a/libjpegtwrp/jmemmgr.c b/libjpegtwrp/jmemmgr.c
deleted file mode 100644
index d801b322d..000000000
--- a/libjpegtwrp/jmemmgr.c
+++ /dev/null
@@ -1,1118 +0,0 @@
-/*
- * jmemmgr.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains the JPEG system-independent memory management
- * routines. This code is usable across a wide variety of machines; most
- * of the system dependencies have been isolated in a separate file.
- * The major functions provided here are:
- * * pool-based allocation and freeing of memory;
- * * policy decisions about how to divide available memory among the
- * virtual arrays;
- * * control logic for swapping virtual arrays between main memory and
- * backing storage.
- * The separate system-dependent file provides the actual backing-storage
- * access code, and it contains the policy decision about how much total
- * main memory to use.
- * This file is system-dependent in the sense that some of its functions
- * are unnecessary in some systems. For example, if there is enough virtual
- * memory so that backing storage will never be used, much of the virtual
- * array control logic could be removed. (Of course, if you have that much
- * memory then you shouldn't care about a little bit of unused code...)
- */
-
-#define JPEG_INTERNALS
-#define AM_MEMORY_MANAGER /* we define jvirt_Xarray_control structs */
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jmemsys.h" /* import the system-dependent declarations */
-
-#ifndef NO_GETENV
-#ifndef HAVE_STDLIB_H /* <stdlib.h> should declare getenv() */
-extern char * getenv JPP((const char * name));
-#endif
-#endif
-
-
-/*
- * Some important notes:
- * The allocation routines provided here must never return NULL.
- * They should exit to error_exit if unsuccessful.
- *
- * It's not a good idea to try to merge the sarray and barray routines,
- * even though they are textually almost the same, because samples are
- * usually stored as bytes while coefficients are shorts or ints. Thus,
- * in machines where byte pointers have a different representation from
- * word pointers, the resulting machine code could not be the same.
- */
-
-
-/*
- * Many machines require storage alignment: longs must start on 4-byte
- * boundaries, doubles on 8-byte boundaries, etc. On such machines, malloc()
- * always returns pointers that are multiples of the worst-case alignment
- * requirement, and we had better do so too.
- * There isn't any really portable way to determine the worst-case alignment
- * requirement. This module assumes that the alignment requirement is
- * multiples of sizeof(ALIGN_TYPE).
- * By default, we define ALIGN_TYPE as double. This is necessary on some
- * workstations (where doubles really do need 8-byte alignment) and will work
- * fine on nearly everything. If your machine has lesser alignment needs,
- * you can save a few bytes by making ALIGN_TYPE smaller.
- * The only place I know of where this will NOT work is certain Macintosh
- * 680x0 compilers that define double as a 10-byte IEEE extended float.
- * Doing 10-byte alignment is counterproductive because longwords won't be
- * aligned well. Put "#define ALIGN_TYPE long" in jconfig.h if you have
- * such a compiler.
- */
-
-#ifndef ALIGN_TYPE /* so can override from jconfig.h */
-#define ALIGN_TYPE double
-#endif
-
-
-/*
- * We allocate objects from "pools", where each pool is gotten with a single
- * request to jpeg_get_small() or jpeg_get_large(). There is no per-object
- * overhead within a pool, except for alignment padding. Each pool has a
- * header with a link to the next pool of the same class.
- * Small and large pool headers are identical except that the latter's
- * link pointer must be FAR on 80x86 machines.
- * Notice that the "real" header fields are union'ed with a dummy ALIGN_TYPE
- * field. This forces the compiler to make SIZEOF(small_pool_hdr) a multiple
- * of the alignment requirement of ALIGN_TYPE.
- */
-
-typedef union small_pool_struct * small_pool_ptr;
-
-typedef union small_pool_struct {
- struct {
- small_pool_ptr next; /* next in list of pools */
- size_t bytes_used; /* how many bytes already used within pool */
- size_t bytes_left; /* bytes still available in this pool */
- } hdr;
- ALIGN_TYPE dummy; /* included in union to ensure alignment */
-} small_pool_hdr;
-
-typedef union large_pool_struct FAR * large_pool_ptr;
-
-typedef union large_pool_struct {
- struct {
- large_pool_ptr next; /* next in list of pools */
- size_t bytes_used; /* how many bytes already used within pool */
- size_t bytes_left; /* bytes still available in this pool */
- } hdr;
- ALIGN_TYPE dummy; /* included in union to ensure alignment */
-} large_pool_hdr;
-
-
-/*
- * Here is the full definition of a memory manager object.
- */
-
-typedef struct {
- struct jpeg_memory_mgr pub; /* public fields */
-
- /* Each pool identifier (lifetime class) names a linked list of pools. */
- small_pool_ptr small_list[JPOOL_NUMPOOLS];
- large_pool_ptr large_list[JPOOL_NUMPOOLS];
-
- /* Since we only have one lifetime class of virtual arrays, only one
- * linked list is necessary (for each datatype). Note that the virtual
- * array control blocks being linked together are actually stored somewhere
- * in the small-pool list.
- */
- jvirt_sarray_ptr virt_sarray_list;
- jvirt_barray_ptr virt_barray_list;
-
- /* This counts total space obtained from jpeg_get_small/large */
- long total_space_allocated;
-
- /* alloc_sarray and alloc_barray set this value for use by virtual
- * array routines.
- */
- JDIMENSION last_rowsperchunk; /* from most recent alloc_sarray/barray */
-} my_memory_mgr;
-
-typedef my_memory_mgr * my_mem_ptr;
-
-
-/*
- * The control blocks for virtual arrays.
- * Note that these blocks are allocated in the "small" pool area.
- * System-dependent info for the associated backing store (if any) is hidden
- * inside the backing_store_info struct.
- */
-
-struct jvirt_sarray_control {
- JSAMPARRAY mem_buffer; /* => the in-memory buffer */
- JDIMENSION rows_in_array; /* total virtual array height */
- JDIMENSION samplesperrow; /* width of array (and of memory buffer) */
- JDIMENSION maxaccess; /* max rows accessed by access_virt_sarray */
- JDIMENSION rows_in_mem; /* height of memory buffer */
- JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */
- JDIMENSION cur_start_row; /* first logical row # in the buffer */
- JDIMENSION first_undef_row; /* row # of first uninitialized row */
- boolean pre_zero; /* pre-zero mode requested? */
- boolean dirty; /* do current buffer contents need written? */
- boolean b_s_open; /* is backing-store data valid? */
- jvirt_sarray_ptr next; /* link to next virtual sarray control block */
- backing_store_info b_s_info; /* System-dependent control info */
-};
-
-struct jvirt_barray_control {
- JBLOCKARRAY mem_buffer; /* => the in-memory buffer */
- JDIMENSION rows_in_array; /* total virtual array height */
- JDIMENSION blocksperrow; /* width of array (and of memory buffer) */
- JDIMENSION maxaccess; /* max rows accessed by access_virt_barray */
- JDIMENSION rows_in_mem; /* height of memory buffer */
- JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */
- JDIMENSION cur_start_row; /* first logical row # in the buffer */
- JDIMENSION first_undef_row; /* row # of first uninitialized row */
- boolean pre_zero; /* pre-zero mode requested? */
- boolean dirty; /* do current buffer contents need written? */
- boolean b_s_open; /* is backing-store data valid? */
- jvirt_barray_ptr next; /* link to next virtual barray control block */
- backing_store_info b_s_info; /* System-dependent control info */
-};
-
-
-#ifdef MEM_STATS /* optional extra stuff for statistics */
-
-LOCAL(void)
-print_mem_stats (j_common_ptr cinfo, int pool_id)
-{
- my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
- small_pool_ptr shdr_ptr;
- large_pool_ptr lhdr_ptr;
-
- /* Since this is only a debugging stub, we can cheat a little by using
- * fprintf directly rather than going through the trace message code.
- * This is helpful because message parm array can't handle longs.
- */
- fprintf(stderr, "Freeing pool %d, total space = %ld\n",
- pool_id, mem->total_space_allocated);
-
- for (lhdr_ptr = mem->large_list[pool_id]; lhdr_ptr != NULL;
- lhdr_ptr = lhdr_ptr->hdr.next) {
- fprintf(stderr, " Large chunk used %ld\n",
- (long) lhdr_ptr->hdr.bytes_used);
- }
-
- for (shdr_ptr = mem->small_list[pool_id]; shdr_ptr != NULL;
- shdr_ptr = shdr_ptr->hdr.next) {
- fprintf(stderr, " Small chunk used %ld free %ld\n",
- (long) shdr_ptr->hdr.bytes_used,
- (long) shdr_ptr->hdr.bytes_left);
- }
-}
-
-#endif /* MEM_STATS */
-
-
-LOCAL(void)
-out_of_memory (j_common_ptr cinfo, int which)
-/* Report an out-of-memory error and stop execution */
-/* If we compiled MEM_STATS support, report alloc requests before dying */
-{
-#ifdef MEM_STATS
- cinfo->err->trace_level = 2; /* force self_destruct to report stats */
-#endif
- ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, which);
-}
-
-
-/*
- * Allocation of "small" objects.
- *
- * For these, we use pooled storage. When a new pool must be created,
- * we try to get enough space for the current request plus a "slop" factor,
- * where the slop will be the amount of leftover space in the new pool.
- * The speed vs. space tradeoff is largely determined by the slop values.
- * A different slop value is provided for each pool class (lifetime),
- * and we also distinguish the first pool of a class from later ones.
- * NOTE: the values given work fairly well on both 16- and 32-bit-int
- * machines, but may be too small if longs are 64 bits or more.
- */
-
-static const size_t first_pool_slop[JPOOL_NUMPOOLS] =
-{
- 1600, /* first PERMANENT pool */
- 16000 /* first IMAGE pool */
-};
-
-static const size_t extra_pool_slop[JPOOL_NUMPOOLS] =
-{
- 0, /* additional PERMANENT pools */
- 5000 /* additional IMAGE pools */
-};
-
-#define MIN_SLOP 50 /* greater than 0 to avoid futile looping */
-
-
-METHODDEF(void *)
-alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
-/* Allocate a "small" object */
-{
- my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
- small_pool_ptr hdr_ptr, prev_hdr_ptr;
- char * data_ptr;
- size_t odd_bytes, min_request, slop;
-
- /* Check for unsatisfiable request (do now to ensure no overflow below) */
- if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(small_pool_hdr)))
- out_of_memory(cinfo, 1); /* request exceeds malloc's ability */
-
- /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */
- odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE);
- if (odd_bytes > 0)
- sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes;
-
- /* See if space is available in any existing pool */
- if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS)
- ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */
- prev_hdr_ptr = NULL;
- hdr_ptr = mem->small_list[pool_id];
- while (hdr_ptr != NULL) {
- if (hdr_ptr->hdr.bytes_left >= sizeofobject)
- break; /* found pool with enough space */
- prev_hdr_ptr = hdr_ptr;
- hdr_ptr = hdr_ptr->hdr.next;
- }
-
- /* Time to make a new pool? */
- if (hdr_ptr == NULL) {
- /* min_request is what we need now, slop is what will be leftover */
- min_request = sizeofobject + SIZEOF(small_pool_hdr);
- if (prev_hdr_ptr == NULL) /* first pool in class? */
- slop = first_pool_slop[pool_id];
- else
- slop = extra_pool_slop[pool_id];
- /* Don't ask for more than MAX_ALLOC_CHUNK */
- if (slop > (size_t) (MAX_ALLOC_CHUNK-min_request))
- slop = (size_t) (MAX_ALLOC_CHUNK-min_request);
- /* Try to get space, if fail reduce slop and try again */
- for (;;) {
- hdr_ptr = (small_pool_ptr) jpeg_get_small(cinfo, min_request + slop);
- if (hdr_ptr != NULL)
- break;
- slop /= 2;
- if (slop < MIN_SLOP) /* give up when it gets real small */
- out_of_memory(cinfo, 2); /* jpeg_get_small failed */
- }
- mem->total_space_allocated += min_request + slop;
- /* Success, initialize the new pool header and add to end of list */
- hdr_ptr->hdr.next = NULL;
- hdr_ptr->hdr.bytes_used = 0;
- hdr_ptr->hdr.bytes_left = sizeofobject + slop;
- if (prev_hdr_ptr == NULL) /* first pool in class? */
- mem->small_list[pool_id] = hdr_ptr;
- else
- prev_hdr_ptr->hdr.next = hdr_ptr;
- }
-
- /* OK, allocate the object from the current pool */
- data_ptr = (char *) (hdr_ptr + 1); /* point to first data byte in pool */
- data_ptr += hdr_ptr->hdr.bytes_used; /* point to place for object */
- hdr_ptr->hdr.bytes_used += sizeofobject;
- hdr_ptr->hdr.bytes_left -= sizeofobject;
-
- return (void *) data_ptr;
-}
-
-
-/*
- * Allocation of "large" objects.
- *
- * The external semantics of these are the same as "small" objects,
- * except that FAR pointers are used on 80x86. However the pool
- * management heuristics are quite different. We assume that each
- * request is large enough that it may as well be passed directly to
- * jpeg_get_large; the pool management just links everything together
- * so that we can free it all on demand.
- * Note: the major use of "large" objects is in JSAMPARRAY and JBLOCKARRAY
- * structures. The routines that create these structures (see below)
- * deliberately bunch rows together to ensure a large request size.
- */
-
-METHODDEF(void FAR *)
-alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
-/* Allocate a "large" object */
-{
- my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
- large_pool_ptr hdr_ptr;
- size_t odd_bytes;
-
- /* Check for unsatisfiable request (do now to ensure no overflow below) */
- if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)))
- out_of_memory(cinfo, 3); /* request exceeds malloc's ability */
-
- /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */
- odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE);
- if (odd_bytes > 0)
- sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes;
-
- /* Always make a new pool */
- if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS)
- ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */
-
- hdr_ptr = (large_pool_ptr) jpeg_get_large(cinfo, sizeofobject +
- SIZEOF(large_pool_hdr));
- if (hdr_ptr == NULL)
- out_of_memory(cinfo, 4); /* jpeg_get_large failed */
- mem->total_space_allocated += sizeofobject + SIZEOF(large_pool_hdr);
-
- /* Success, initialize the new pool header and add to list */
- hdr_ptr->hdr.next = mem->large_list[pool_id];
- /* We maintain space counts in each pool header for statistical purposes,
- * even though they are not needed for allocation.
- */
- hdr_ptr->hdr.bytes_used = sizeofobject;
- hdr_ptr->hdr.bytes_left = 0;
- mem->large_list[pool_id] = hdr_ptr;
-
- return (void FAR *) (hdr_ptr + 1); /* point to first data byte in pool */
-}
-
-
-/*
- * Creation of 2-D sample arrays.
- * The pointers are in near heap, the samples themselves in FAR heap.
- *
- * To minimize allocation overhead and to allow I/O of large contiguous
- * blocks, we allocate the sample rows in groups of as many rows as possible
- * without exceeding MAX_ALLOC_CHUNK total bytes per allocation request.
- * NB: the virtual array control routines, later in this file, know about
- * this chunking of rows. The rowsperchunk value is left in the mem manager
- * object so that it can be saved away if this sarray is the workspace for
- * a virtual array.
- */
-
-METHODDEF(JSAMPARRAY)
-alloc_sarray (j_common_ptr cinfo, int pool_id,
- JDIMENSION samplesperrow, JDIMENSION numrows)
-/* Allocate a 2-D sample array */
-{
- my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
- JSAMPARRAY result;
- JSAMPROW workspace;
- JDIMENSION rowsperchunk, currow, i;
- long ltemp;
-
- /* Calculate max # of rows allowed in one allocation chunk */
- ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) /
- ((long) samplesperrow * SIZEOF(JSAMPLE));
- if (ltemp <= 0)
- ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
- if (ltemp < (long) numrows)
- rowsperchunk = (JDIMENSION) ltemp;
- else
- rowsperchunk = numrows;
- mem->last_rowsperchunk = rowsperchunk;
-
- /* Get space for row pointers (small object) */
- result = (JSAMPARRAY) alloc_small(cinfo, pool_id,
- (size_t) (numrows * SIZEOF(JSAMPROW)));
-
- /* Get the rows themselves (large objects) */
- currow = 0;
- while (currow < numrows) {
- rowsperchunk = MIN(rowsperchunk, numrows - currow);
- workspace = (JSAMPROW) alloc_large(cinfo, pool_id,
- (size_t) ((size_t) rowsperchunk * (size_t) samplesperrow
- * SIZEOF(JSAMPLE)));
- for (i = rowsperchunk; i > 0; i--) {
- result[currow++] = workspace;
- workspace += samplesperrow;
- }
- }
-
- return result;
-}
-
-
-/*
- * Creation of 2-D coefficient-block arrays.
- * This is essentially the same as the code for sample arrays, above.
- */
-
-METHODDEF(JBLOCKARRAY)
-alloc_barray (j_common_ptr cinfo, int pool_id,
- JDIMENSION blocksperrow, JDIMENSION numrows)
-/* Allocate a 2-D coefficient-block array */
-{
- my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
- JBLOCKARRAY result;
- JBLOCKROW workspace;
- JDIMENSION rowsperchunk, currow, i;
- long ltemp;
-
- /* Calculate max # of rows allowed in one allocation chunk */
- ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) /
- ((long) blocksperrow * SIZEOF(JBLOCK));
- if (ltemp <= 0)
- ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
- if (ltemp < (long) numrows)
- rowsperchunk = (JDIMENSION) ltemp;
- else
- rowsperchunk = numrows;
- mem->last_rowsperchunk = rowsperchunk;
-
- /* Get space for row pointers (small object) */
- result = (JBLOCKARRAY) alloc_small(cinfo, pool_id,
- (size_t) (numrows * SIZEOF(JBLOCKROW)));
-
- /* Get the rows themselves (large objects) */
- currow = 0;
- while (currow < numrows) {
- rowsperchunk = MIN(rowsperchunk, numrows - currow);
- workspace = (JBLOCKROW) alloc_large(cinfo, pool_id,
- (size_t) ((size_t) rowsperchunk * (size_t) blocksperrow
- * SIZEOF(JBLOCK)));
- for (i = rowsperchunk; i > 0; i--) {
- result[currow++] = workspace;
- workspace += blocksperrow;
- }
- }
-
- return result;
-}
-
-
-/*
- * About virtual array management:
- *
- * The above "normal" array routines are only used to allocate strip buffers
- * (as wide as the image, but just a few rows high). Full-image-sized buffers
- * are handled as "virtual" arrays. The array is still accessed a strip at a
- * time, but the memory manager must save the whole array for repeated
- * accesses. The intended implementation is that there is a strip buffer in
- * memory (as high as is possible given the desired memory limit), plus a
- * backing file that holds the rest of the array.
- *
- * The request_virt_array routines are told the total size of the image and
- * the maximum number of rows that will be accessed at once. The in-memory
- * buffer must be at least as large as the maxaccess value.
- *
- * The request routines create control blocks but not the in-memory buffers.
- * That is postponed until realize_virt_arrays is called. At that time the
- * total amount of space needed is known (approximately, anyway), so free
- * memory can be divided up fairly.
- *
- * The access_virt_array routines are responsible for making a specific strip
- * area accessible (after reading or writing the backing file, if necessary).
- * Note that the access routines are told whether the caller intends to modify
- * the accessed strip; during a read-only pass this saves having to rewrite
- * data to disk. The access routines are also responsible for pre-zeroing
- * any newly accessed rows, if pre-zeroing was requested.
- *
- * In current usage, the access requests are usually for nonoverlapping
- * strips; that is, successive access start_row numbers differ by exactly
- * num_rows = maxaccess. This means we can get good performance with simple
- * buffer dump/reload logic, by making the in-memory buffer be a multiple
- * of the access height; then there will never be accesses across bufferload
- * boundaries. The code will still work with overlapping access requests,
- * but it doesn't handle bufferload overlaps very efficiently.
- */
-
-
-METHODDEF(jvirt_sarray_ptr)
-request_virt_sarray (j_common_ptr cinfo, int pool_id, boolean pre_zero,
- JDIMENSION samplesperrow, JDIMENSION numrows,
- JDIMENSION maxaccess)
-/* Request a virtual 2-D sample array */
-{
- my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
- jvirt_sarray_ptr result;
-
- /* Only IMAGE-lifetime virtual arrays are currently supported */
- if (pool_id != JPOOL_IMAGE)
- ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */
-
- /* get control block */
- result = (jvirt_sarray_ptr) alloc_small(cinfo, pool_id,
- SIZEOF(struct jvirt_sarray_control));
-
- result->mem_buffer = NULL; /* marks array not yet realized */
- result->rows_in_array = numrows;
- result->samplesperrow = samplesperrow;
- result->maxaccess = maxaccess;
- result->pre_zero = pre_zero;
- result->b_s_open = FALSE; /* no associated backing-store object */
- result->next = mem->virt_sarray_list; /* add to list of virtual arrays */
- mem->virt_sarray_list = result;
-
- return result;
-}
-
-
-METHODDEF(jvirt_barray_ptr)
-request_virt_barray (j_common_ptr cinfo, int pool_id, boolean pre_zero,
- JDIMENSION blocksperrow, JDIMENSION numrows,
- JDIMENSION maxaccess)
-/* Request a virtual 2-D coefficient-block array */
-{
- my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
- jvirt_barray_ptr result;
-
- /* Only IMAGE-lifetime virtual arrays are currently supported */
- if (pool_id != JPOOL_IMAGE)
- ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */
-
- /* get control block */
- result = (jvirt_barray_ptr) alloc_small(cinfo, pool_id,
- SIZEOF(struct jvirt_barray_control));
-
- result->mem_buffer = NULL; /* marks array not yet realized */
- result->rows_in_array = numrows;
- result->blocksperrow = blocksperrow;
- result->maxaccess = maxaccess;
- result->pre_zero = pre_zero;
- result->b_s_open = FALSE; /* no associated backing-store object */
- result->next = mem->virt_barray_list; /* add to list of virtual arrays */
- mem->virt_barray_list = result;
-
- return result;
-}
-
-
-METHODDEF(void)
-realize_virt_arrays (j_common_ptr cinfo)
-/* Allocate the in-memory buffers for any unrealized virtual arrays */
-{
- my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
- long space_per_minheight, maximum_space, avail_mem;
- long minheights, max_minheights;
- jvirt_sarray_ptr sptr;
- jvirt_barray_ptr bptr;
-
- /* Compute the minimum space needed (maxaccess rows in each buffer)
- * and the maximum space needed (full image height in each buffer).
- * These may be of use to the system-dependent jpeg_mem_available routine.
- */
- space_per_minheight = 0;
- maximum_space = 0;
- for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) {
- if (sptr->mem_buffer == NULL) { /* if not realized yet */
- space_per_minheight += (long) sptr->maxaccess *
- (long) sptr->samplesperrow * SIZEOF(JSAMPLE);
- maximum_space += (long) sptr->rows_in_array *
- (long) sptr->samplesperrow * SIZEOF(JSAMPLE);
- }
- }
- for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) {
- if (bptr->mem_buffer == NULL) { /* if not realized yet */
- space_per_minheight += (long) bptr->maxaccess *
- (long) bptr->blocksperrow * SIZEOF(JBLOCK);
- maximum_space += (long) bptr->rows_in_array *
- (long) bptr->blocksperrow * SIZEOF(JBLOCK);
- }
- }
-
- if (space_per_minheight <= 0)
- return; /* no unrealized arrays, no work */
-
- /* Determine amount of memory to actually use; this is system-dependent. */
- avail_mem = jpeg_mem_available(cinfo, space_per_minheight, maximum_space,
- mem->total_space_allocated);
-
- /* If the maximum space needed is available, make all the buffers full
- * height; otherwise parcel it out with the same number of minheights
- * in each buffer.
- */
- if (avail_mem >= maximum_space)
- max_minheights = 1000000000L;
- else {
- max_minheights = avail_mem / space_per_minheight;
- /* If there doesn't seem to be enough space, try to get the minimum
- * anyway. This allows a "stub" implementation of jpeg_mem_available().
- */
- if (max_minheights <= 0)
- max_minheights = 1;
- }
-
- /* Allocate the in-memory buffers and initialize backing store as needed. */
-
- for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) {
- if (sptr->mem_buffer == NULL) { /* if not realized yet */
- minheights = ((long) sptr->rows_in_array - 1L) / sptr->maxaccess + 1L;
- if (minheights <= max_minheights) {
- /* This buffer fits in memory */
- sptr->rows_in_mem = sptr->rows_in_array;
- } else {
- /* It doesn't fit in memory, create backing store. */
- sptr->rows_in_mem = (JDIMENSION) (max_minheights * sptr->maxaccess);
- jpeg_open_backing_store(cinfo, & sptr->b_s_info,
- (long) sptr->rows_in_array *
- (long) sptr->samplesperrow *
- (long) SIZEOF(JSAMPLE));
- sptr->b_s_open = TRUE;
- }
- sptr->mem_buffer = alloc_sarray(cinfo, JPOOL_IMAGE,
- sptr->samplesperrow, sptr->rows_in_mem);
- sptr->rowsperchunk = mem->last_rowsperchunk;
- sptr->cur_start_row = 0;
- sptr->first_undef_row = 0;
- sptr->dirty = FALSE;
- }
- }
-
- for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) {
- if (bptr->mem_buffer == NULL) { /* if not realized yet */
- minheights = ((long) bptr->rows_in_array - 1L) / bptr->maxaccess + 1L;
- if (minheights <= max_minheights) {
- /* This buffer fits in memory */
- bptr->rows_in_mem = bptr->rows_in_array;
- } else {
- /* It doesn't fit in memory, create backing store. */
- bptr->rows_in_mem = (JDIMENSION) (max_minheights * bptr->maxaccess);
- jpeg_open_backing_store(cinfo, & bptr->b_s_info,
- (long) bptr->rows_in_array *
- (long) bptr->blocksperrow *
- (long) SIZEOF(JBLOCK));
- bptr->b_s_open = TRUE;
- }
- bptr->mem_buffer = alloc_barray(cinfo, JPOOL_IMAGE,
- bptr->blocksperrow, bptr->rows_in_mem);
- bptr->rowsperchunk = mem->last_rowsperchunk;
- bptr->cur_start_row = 0;
- bptr->first_undef_row = 0;
- bptr->dirty = FALSE;
- }
- }
-}
-
-
-LOCAL(void)
-do_sarray_io (j_common_ptr cinfo, jvirt_sarray_ptr ptr, boolean writing)
-/* Do backing store read or write of a virtual sample array */
-{
- long bytesperrow, file_offset, byte_count, rows, thisrow, i;
-
- bytesperrow = (long) ptr->samplesperrow * SIZEOF(JSAMPLE);
- file_offset = ptr->cur_start_row * bytesperrow;
- /* Loop to read or write each allocation chunk in mem_buffer */
- for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) {
- /* One chunk, but check for short chunk at end of buffer */
- rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i);
- /* Transfer no more than is currently defined */
- thisrow = (long) ptr->cur_start_row + i;
- rows = MIN(rows, (long) ptr->first_undef_row - thisrow);
- /* Transfer no more than fits in file */
- rows = MIN(rows, (long) ptr->rows_in_array - thisrow);
- if (rows <= 0) /* this chunk might be past end of file! */
- break;
- byte_count = rows * bytesperrow;
- if (writing)
- (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info,
- (void FAR *) ptr->mem_buffer[i],
- file_offset, byte_count);
- else
- (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info,
- (void FAR *) ptr->mem_buffer[i],
- file_offset, byte_count);
- file_offset += byte_count;
- }
-}
-
-
-LOCAL(void)
-do_barray_io (j_common_ptr cinfo, jvirt_barray_ptr ptr, boolean writing)
-/* Do backing store read or write of a virtual coefficient-block array */
-{
- long bytesperrow, file_offset, byte_count, rows, thisrow, i;
-
- bytesperrow = (long) ptr->blocksperrow * SIZEOF(JBLOCK);
- file_offset = ptr->cur_start_row * bytesperrow;
- /* Loop to read or write each allocation chunk in mem_buffer */
- for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) {
- /* One chunk, but check for short chunk at end of buffer */
- rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i);
- /* Transfer no more than is currently defined */
- thisrow = (long) ptr->cur_start_row + i;
- rows = MIN(rows, (long) ptr->first_undef_row - thisrow);
- /* Transfer no more than fits in file */
- rows = MIN(rows, (long) ptr->rows_in_array - thisrow);
- if (rows <= 0) /* this chunk might be past end of file! */
- break;
- byte_count = rows * bytesperrow;
- if (writing)
- (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info,
- (void FAR *) ptr->mem_buffer[i],
- file_offset, byte_count);
- else
- (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info,
- (void FAR *) ptr->mem_buffer[i],
- file_offset, byte_count);
- file_offset += byte_count;
- }
-}
-
-
-METHODDEF(JSAMPARRAY)
-access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr,
- JDIMENSION start_row, JDIMENSION num_rows,
- boolean writable)
-/* Access the part of a virtual sample array starting at start_row */
-/* and extending for num_rows rows. writable is true if */
-/* caller intends to modify the accessed area. */
-{
- JDIMENSION end_row = start_row + num_rows;
- JDIMENSION undef_row;
-
- /* debugging check */
- if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess ||
- ptr->mem_buffer == NULL)
- ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS);
-
- /* Make the desired part of the virtual array accessible */
- if (start_row < ptr->cur_start_row ||
- end_row > ptr->cur_start_row+ptr->rows_in_mem) {
- if (! ptr->b_s_open)
- ERREXIT(cinfo, JERR_VIRTUAL_BUG);
- /* Flush old buffer contents if necessary */
- if (ptr->dirty) {
- do_sarray_io(cinfo, ptr, TRUE);
- ptr->dirty = FALSE;
- }
- /* Decide what part of virtual array to access.
- * Algorithm: if target address > current window, assume forward scan,
- * load starting at target address. If target address < current window,
- * assume backward scan, load so that target area is top of window.
- * Note that when switching from forward write to forward read, will have
- * start_row = 0, so the limiting case applies and we load from 0 anyway.
- */
- if (start_row > ptr->cur_start_row) {
- ptr->cur_start_row = start_row;
- } else {
- /* use long arithmetic here to avoid overflow & unsigned problems */
- long ltemp;
-
- ltemp = (long) end_row - (long) ptr->rows_in_mem;
- if (ltemp < 0)
- ltemp = 0; /* don't fall off front end of file */
- ptr->cur_start_row = (JDIMENSION) ltemp;
- }
- /* Read in the selected part of the array.
- * During the initial write pass, we will do no actual read
- * because the selected part is all undefined.
- */
- do_sarray_io(cinfo, ptr, FALSE);
- }
- /* Ensure the accessed part of the array is defined; prezero if needed.
- * To improve locality of access, we only prezero the part of the array
- * that the caller is about to access, not the entire in-memory array.
- */
- if (ptr->first_undef_row < end_row) {
- if (ptr->first_undef_row < start_row) {
- if (writable) /* writer skipped over a section of array */
- ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS);
- undef_row = start_row; /* but reader is allowed to read ahead */
- } else {
- undef_row = ptr->first_undef_row;
- }
- if (writable)
- ptr->first_undef_row = end_row;
- if (ptr->pre_zero) {
- size_t bytesperrow = (size_t) ptr->samplesperrow * SIZEOF(JSAMPLE);
- undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */
- end_row -= ptr->cur_start_row;
- while (undef_row < end_row) {
- jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow);
- undef_row++;
- }
- } else {
- if (! writable) /* reader looking at undefined data */
- ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS);
- }
- }
- /* Flag the buffer dirty if caller will write in it */
- if (writable)
- ptr->dirty = TRUE;
- /* Return address of proper part of the buffer */
- return ptr->mem_buffer + (start_row - ptr->cur_start_row);
-}
-
-
-METHODDEF(JBLOCKARRAY)
-access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr,
- JDIMENSION start_row, JDIMENSION num_rows,
- boolean writable)
-/* Access the part of a virtual block array starting at start_row */
-/* and extending for num_rows rows. writable is true if */
-/* caller intends to modify the accessed area. */
-{
- JDIMENSION end_row = start_row + num_rows;
- JDIMENSION undef_row;
-
- /* debugging check */
- if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess ||
- ptr->mem_buffer == NULL)
- ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS);
-
- /* Make the desired part of the virtual array accessible */
- if (start_row < ptr->cur_start_row ||
- end_row > ptr->cur_start_row+ptr->rows_in_mem) {
- if (! ptr->b_s_open)
- ERREXIT(cinfo, JERR_VIRTUAL_BUG);
- /* Flush old buffer contents if necessary */
- if (ptr->dirty) {
- do_barray_io(cinfo, ptr, TRUE);
- ptr->dirty = FALSE;
- }
- /* Decide what part of virtual array to access.
- * Algorithm: if target address > current window, assume forward scan,
- * load starting at target address. If target address < current window,
- * assume backward scan, load so that target area is top of window.
- * Note that when switching from forward write to forward read, will have
- * start_row = 0, so the limiting case applies and we load from 0 anyway.
- */
- if (start_row > ptr->cur_start_row) {
- ptr->cur_start_row = start_row;
- } else {
- /* use long arithmetic here to avoid overflow & unsigned problems */
- long ltemp;
-
- ltemp = (long) end_row - (long) ptr->rows_in_mem;
- if (ltemp < 0)
- ltemp = 0; /* don't fall off front end of file */
- ptr->cur_start_row = (JDIMENSION) ltemp;
- }
- /* Read in the selected part of the array.
- * During the initial write pass, we will do no actual read
- * because the selected part is all undefined.
- */
- do_barray_io(cinfo, ptr, FALSE);
- }
- /* Ensure the accessed part of the array is defined; prezero if needed.
- * To improve locality of access, we only prezero the part of the array
- * that the caller is about to access, not the entire in-memory array.
- */
- if (ptr->first_undef_row < end_row) {
- if (ptr->first_undef_row < start_row) {
- if (writable) /* writer skipped over a section of array */
- ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS);
- undef_row = start_row; /* but reader is allowed to read ahead */
- } else {
- undef_row = ptr->first_undef_row;
- }
- if (writable)
- ptr->first_undef_row = end_row;
- if (ptr->pre_zero) {
- size_t bytesperrow = (size_t) ptr->blocksperrow * SIZEOF(JBLOCK);
- undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */
- end_row -= ptr->cur_start_row;
- while (undef_row < end_row) {
- jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow);
- undef_row++;
- }
- } else {
- if (! writable) /* reader looking at undefined data */
- ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS);
- }
- }
- /* Flag the buffer dirty if caller will write in it */
- if (writable)
- ptr->dirty = TRUE;
- /* Return address of proper part of the buffer */
- return ptr->mem_buffer + (start_row - ptr->cur_start_row);
-}
-
-
-/*
- * Release all objects belonging to a specified pool.
- */
-
-METHODDEF(void)
-free_pool (j_common_ptr cinfo, int pool_id)
-{
- my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
- small_pool_ptr shdr_ptr;
- large_pool_ptr lhdr_ptr;
- size_t space_freed;
-
- if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS)
- ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */
-
-#ifdef MEM_STATS
- if (cinfo->err->trace_level > 1)
- print_mem_stats(cinfo, pool_id); /* print pool's memory usage statistics */
-#endif
-
- /* If freeing IMAGE pool, close any virtual arrays first */
- if (pool_id == JPOOL_IMAGE) {
- jvirt_sarray_ptr sptr;
- jvirt_barray_ptr bptr;
-
- for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) {
- if (sptr->b_s_open) { /* there may be no backing store */
- sptr->b_s_open = FALSE; /* prevent recursive close if error */
- (*sptr->b_s_info.close_backing_store) (cinfo, & sptr->b_s_info);
- }
- }
- mem->virt_sarray_list = NULL;
- for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) {
- if (bptr->b_s_open) { /* there may be no backing store */
- bptr->b_s_open = FALSE; /* prevent recursive close if error */
- (*bptr->b_s_info.close_backing_store) (cinfo, & bptr->b_s_info);
- }
- }
- mem->virt_barray_list = NULL;
- }
-
- /* Release large objects */
- lhdr_ptr = mem->large_list[pool_id];
- mem->large_list[pool_id] = NULL;
-
- while (lhdr_ptr != NULL) {
- large_pool_ptr next_lhdr_ptr = lhdr_ptr->hdr.next;
- space_freed = lhdr_ptr->hdr.bytes_used +
- lhdr_ptr->hdr.bytes_left +
- SIZEOF(large_pool_hdr);
- jpeg_free_large(cinfo, (void FAR *) lhdr_ptr, space_freed);
- mem->total_space_allocated -= space_freed;
- lhdr_ptr = next_lhdr_ptr;
- }
-
- /* Release small objects */
- shdr_ptr = mem->small_list[pool_id];
- mem->small_list[pool_id] = NULL;
-
- while (shdr_ptr != NULL) {
- small_pool_ptr next_shdr_ptr = shdr_ptr->hdr.next;
- space_freed = shdr_ptr->hdr.bytes_used +
- shdr_ptr->hdr.bytes_left +
- SIZEOF(small_pool_hdr);
- jpeg_free_small(cinfo, (void *) shdr_ptr, space_freed);
- mem->total_space_allocated -= space_freed;
- shdr_ptr = next_shdr_ptr;
- }
-}
-
-
-/*
- * Close up shop entirely.
- * Note that this cannot be called unless cinfo->mem is non-NULL.
- */
-
-METHODDEF(void)
-self_destruct (j_common_ptr cinfo)
-{
- int pool;
-
- /* Close all backing store, release all memory.
- * Releasing pools in reverse order might help avoid fragmentation
- * with some (brain-damaged) malloc libraries.
- */
- for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) {
- free_pool(cinfo, pool);
- }
-
- /* Release the memory manager control block too. */
- jpeg_free_small(cinfo, (void *) cinfo->mem, SIZEOF(my_memory_mgr));
- cinfo->mem = NULL; /* ensures I will be called only once */
-
- jpeg_mem_term(cinfo); /* system-dependent cleanup */
-}
-
-
-/*
- * Memory manager initialization.
- * When this is called, only the error manager pointer is valid in cinfo!
- */
-
-GLOBAL(void)
-jinit_memory_mgr (j_common_ptr cinfo)
-{
- my_mem_ptr mem;
- long max_to_use;
- int pool;
- size_t test_mac;
-
- cinfo->mem = NULL; /* for safety if init fails */
-
- /* Check for configuration errors.
- * SIZEOF(ALIGN_TYPE) should be a power of 2; otherwise, it probably
- * doesn't reflect any real hardware alignment requirement.
- * The test is a little tricky: for X>0, X and X-1 have no one-bits
- * in common if and only if X is a power of 2, ie has only one one-bit.
- * Some compilers may give an "unreachable code" warning here; ignore it.
- */
- if ((SIZEOF(ALIGN_TYPE) & (SIZEOF(ALIGN_TYPE)-1)) != 0)
- ERREXIT(cinfo, JERR_BAD_ALIGN_TYPE);
- /* MAX_ALLOC_CHUNK must be representable as type size_t, and must be
- * a multiple of SIZEOF(ALIGN_TYPE).
- * Again, an "unreachable code" warning may be ignored here.
- * But a "constant too large" warning means you need to fix MAX_ALLOC_CHUNK.
- */
- test_mac = (size_t) MAX_ALLOC_CHUNK;
- if ((long) test_mac != MAX_ALLOC_CHUNK ||
- (MAX_ALLOC_CHUNK % SIZEOF(ALIGN_TYPE)) != 0)
- ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK);
-
- max_to_use = jpeg_mem_init(cinfo); /* system-dependent initialization */
-
- /* Attempt to allocate memory manager's control block */
- mem = (my_mem_ptr) jpeg_get_small(cinfo, SIZEOF(my_memory_mgr));
-
- if (mem == NULL) {
- jpeg_mem_term(cinfo); /* system-dependent cleanup */
- ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 0);
- }
-
- /* OK, fill in the method pointers */
- mem->pub.alloc_small = alloc_small;
- mem->pub.alloc_large = alloc_large;
- mem->pub.alloc_sarray = alloc_sarray;
- mem->pub.alloc_barray = alloc_barray;
- mem->pub.request_virt_sarray = request_virt_sarray;
- mem->pub.request_virt_barray = request_virt_barray;
- mem->pub.realize_virt_arrays = realize_virt_arrays;
- mem->pub.access_virt_sarray = access_virt_sarray;
- mem->pub.access_virt_barray = access_virt_barray;
- mem->pub.free_pool = free_pool;
- mem->pub.self_destruct = self_destruct;
-
- /* Make MAX_ALLOC_CHUNK accessible to other modules */
- mem->pub.max_alloc_chunk = MAX_ALLOC_CHUNK;
-
- /* Initialize working state */
- mem->pub.max_memory_to_use = max_to_use;
-
- for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) {
- mem->small_list[pool] = NULL;
- mem->large_list[pool] = NULL;
- }
- mem->virt_sarray_list = NULL;
- mem->virt_barray_list = NULL;
-
- mem->total_space_allocated = SIZEOF(my_memory_mgr);
-
- /* Declare ourselves open for business */
- cinfo->mem = & mem->pub;
-
- /* Check for an environment variable JPEGMEM; if found, override the
- * default max_memory setting from jpeg_mem_init. Note that the
- * surrounding application may again override this value.
- * If your system doesn't support getenv(), define NO_GETENV to disable
- * this feature.
- */
-#ifndef NO_GETENV
- { char * memenv;
-
- if ((memenv = getenv("JPEGMEM")) != NULL) {
- char ch = 'x';
-
- if (sscanf(memenv, "%ld%c", &max_to_use, &ch) > 0) {
- if (ch == 'm' || ch == 'M')
- max_to_use *= 1000L;
- mem->pub.max_memory_to_use = max_to_use * 1000L;
- }
- }
- }
-#endif
-
-}
diff --git a/libjpegtwrp/jmemname.c b/libjpegtwrp/jmemname.c
deleted file mode 100644
index ed96dee1b..000000000
--- a/libjpegtwrp/jmemname.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * jmemname.c
- *
- * Copyright (C) 1992-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file provides a generic implementation of the system-dependent
- * portion of the JPEG memory manager. This implementation assumes that
- * you must explicitly construct a name for each temp file.
- * Also, the problem of determining the amount of memory available
- * is shoved onto the user.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jmemsys.h" /* import the system-dependent declarations */
-
-#ifndef HAVE_STDLIB_H /* <stdlib.h> should declare malloc(),free() */
-extern void * malloc JPP((size_t size));
-extern void free JPP((void *ptr));
-#endif
-
-#ifndef SEEK_SET /* pre-ANSI systems may not define this; */
-#define SEEK_SET 0 /* if not, assume 0 is correct */
-#endif
-
-#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */
-#define READ_BINARY "r"
-#define RW_BINARY "w+"
-#else
-#ifdef VMS /* VMS is very nonstandard */
-#define READ_BINARY "rb", "ctx=stm"
-#define RW_BINARY "w+b", "ctx=stm"
-#else /* standard ANSI-compliant case */
-#define READ_BINARY "rb"
-#define RW_BINARY "w+b"
-#endif
-#endif
-
-
-/*
- * Selection of a file name for a temporary file.
- * This is system-dependent!
- *
- * The code as given is suitable for most Unix systems, and it is easily
- * modified for most non-Unix systems. Some notes:
- * 1. The temp file is created in the directory named by TEMP_DIRECTORY.
- * The default value is /usr/tmp, which is the conventional place for
- * creating large temp files on Unix. On other systems you'll probably
- * want to change the file location. You can do this by editing the
- * #define, or (preferred) by defining TEMP_DIRECTORY in jconfig.h.
- *
- * 2. If you need to change the file name as well as its location,
- * you can override the TEMP_FILE_NAME macro. (Note that this is
- * actually a printf format string; it must contain %s and %d.)
- * Few people should need to do this.
- *
- * 3. mktemp() is used to ensure that multiple processes running
- * simultaneously won't select the same file names. If your system
- * doesn't have mktemp(), define NO_MKTEMP to do it the hard way.
- * (If you don't have <errno.h>, also define NO_ERRNO_H.)
- *
- * 4. You probably want to define NEED_SIGNAL_CATCHER so that cjpeg.c/djpeg.c
- * will cause the temp files to be removed if you stop the program early.
- */
-
-#ifndef TEMP_DIRECTORY /* can override from jconfig.h or Makefile */
-#define TEMP_DIRECTORY "/usr/tmp/" /* recommended setting for Unix */
-#endif
-
-static int next_file_num; /* to distinguish among several temp files */
-
-#ifdef NO_MKTEMP
-
-#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */
-#define TEMP_FILE_NAME "%sJPG%03d.TMP"
-#endif
-
-#ifndef NO_ERRNO_H
-#include <errno.h> /* to define ENOENT */
-#endif
-
-/* ANSI C specifies that errno is a macro, but on older systems it's more
- * likely to be a plain int variable. And not all versions of errno.h
- * bother to declare it, so we have to in order to be most portable. Thus:
- */
-#ifndef errno
-extern int errno;
-#endif
-
-
-LOCAL(void)
-select_file_name (char * fname)
-{
- FILE * tfile;
-
- /* Keep generating file names till we find one that's not in use */
- for (;;) {
- next_file_num++; /* advance counter */
- sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num);
- if ((tfile = fopen(fname, READ_BINARY)) == NULL) {
- /* fopen could have failed for a reason other than the file not
- * being there; for example, file there but unreadable.
- * If <errno.h> isn't available, then we cannot test the cause.
- */
-#ifdef ENOENT
- if (errno != ENOENT)
- continue;
-#endif
- break;
- }
- fclose(tfile); /* oops, it's there; close tfile & try again */
- }
-}
-
-#else /* ! NO_MKTEMP */
-
-/* Note that mktemp() requires the initial filename to end in six X's */
-#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */
-#define TEMP_FILE_NAME "%sJPG%dXXXXXX"
-#endif
-
-LOCAL(void)
-select_file_name (char * fname)
-{
- next_file_num++; /* advance counter */
- sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num);
- mktemp(fname); /* make sure file name is unique */
- /* mktemp replaces the trailing XXXXXX with a unique string of characters */
-}
-
-#endif /* NO_MKTEMP */
-
-
-/*
- * Memory allocation and freeing are controlled by the regular library
- * routines malloc() and free().
- */
-
-GLOBAL(void *)
-jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
-{
- return (void *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
-{
- free(object);
-}
-
-
-/*
- * "Large" objects are treated the same as "small" ones.
- * NB: although we include FAR keywords in the routine declarations,
- * this file won't actually work in 80x86 small/medium model; at least,
- * you probably won't be able to process useful-size images in only 64KB.
- */
-
-GLOBAL(void FAR *)
-jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
-{
- return (void FAR *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
-{
- free(object);
-}
-
-
-/*
- * This routine computes the total memory space available for allocation.
- * It's impossible to do this in a portable way; our current solution is
- * to make the user tell us (with a default value set at compile time).
- * If you can actually get the available space, it's a good idea to subtract
- * a slop factor of 5% or so.
- */
-
-#ifndef DEFAULT_MAX_MEM /* so can override from makefile */
-#define DEFAULT_MAX_MEM 1000000L /* default: one megabyte */
-#endif
-
-GLOBAL(long)
-jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
- long max_bytes_needed, long already_allocated)
-{
- return cinfo->mem->max_memory_to_use - already_allocated;
-}
-
-
-/*
- * Backing store (temporary file) management.
- * Backing store objects are only used when the value returned by
- * jpeg_mem_available is less than the total space needed. You can dispense
- * with these routines if you have plenty of virtual memory; see jmemnobs.c.
- */
-
-
-METHODDEF(void)
-read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- if (fseek(info->temp_file, file_offset, SEEK_SET))
- ERREXIT(cinfo, JERR_TFILE_SEEK);
- if (JFREAD(info->temp_file, buffer_address, byte_count)
- != (size_t) byte_count)
- ERREXIT(cinfo, JERR_TFILE_READ);
-}
-
-
-METHODDEF(void)
-write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count)
-{
- if (fseek(info->temp_file, file_offset, SEEK_SET))
- ERREXIT(cinfo, JERR_TFILE_SEEK);
- if (JFWRITE(info->temp_file, buffer_address, byte_count)
- != (size_t) byte_count)
- ERREXIT(cinfo, JERR_TFILE_WRITE);
-}
-
-
-METHODDEF(void)
-close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
-{
- fclose(info->temp_file); /* close the file */
- unlink(info->temp_name); /* delete the file */
-/* If your system doesn't have unlink(), use remove() instead.
- * remove() is the ANSI-standard name for this function, but if
- * your system was ANSI you'd be using jmemansi.c, right?
- */
- TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name);
-}
-
-
-/*
- * Initial opening of a backing-store object.
- */
-
-GLOBAL(void)
-jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- long total_bytes_needed)
-{
- select_file_name(info->temp_name);
- if ((info->temp_file = fopen(info->temp_name, RW_BINARY)) == NULL)
- ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
- info->read_backing_store = read_backing_store;
- info->write_backing_store = write_backing_store;
- info->close_backing_store = close_backing_store;
- TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name);
-}
-
-
-/*
- * These routines take care of any system-dependent initialization and
- * cleanup required.
- */
-
-GLOBAL(long)
-jpeg_mem_init (j_common_ptr cinfo)
-{
- next_file_num = 0; /* initialize temp file name generator */
- return DEFAULT_MAX_MEM; /* default for max_memory_to_use */
-}
-
-GLOBAL(void)
-jpeg_mem_term (j_common_ptr cinfo)
-{
- /* no work */
-}
diff --git a/libjpegtwrp/jmemnobs.c b/libjpegtwrp/jmemnobs.c
deleted file mode 100644
index eb8c33772..000000000
--- a/libjpegtwrp/jmemnobs.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * jmemnobs.c
- *
- * Copyright (C) 1992-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file provides a really simple implementation of the system-
- * dependent portion of the JPEG memory manager. This implementation
- * assumes that no backing-store files are needed: all required space
- * can be obtained from malloc().
- * This is very portable in the sense that it'll compile on almost anything,
- * but you'd better have lots of main memory (or virtual memory) if you want
- * to process big images.
- * Note that the max_memory_to_use option is ignored by this implementation.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jmemsys.h" /* import the system-dependent declarations */
-
-#ifndef HAVE_STDLIB_H /* <stdlib.h> should declare malloc(),free() */
-extern void * malloc JPP((size_t size));
-extern void free JPP((void *ptr));
-#endif
-
-
-/*
- * Memory allocation and freeing are controlled by the regular library
- * routines malloc() and free().
- */
-
-GLOBAL(void *)
-jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
-{
- return (void *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
-{
- free(object);
-}
-
-
-/*
- * "Large" objects are treated the same as "small" ones.
- * NB: although we include FAR keywords in the routine declarations,
- * this file won't actually work in 80x86 small/medium model; at least,
- * you probably won't be able to process useful-size images in only 64KB.
- */
-
-GLOBAL(void FAR *)
-jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
-{
- return (void FAR *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
-{
- free(object);
-}
-
-
-/*
- * This routine computes the total memory space available for allocation.
- * Here we always say, "we got all you want bud!"
- */
-
-GLOBAL(long)
-jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
- long max_bytes_needed, long already_allocated)
-{
- return max_bytes_needed;
-}
-
-
-/*
- * Backing store (temporary file) management.
- * Since jpeg_mem_available always promised the moon,
- * this should never be called and we can just error out.
- */
-
-GLOBAL(void)
-jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
- long total_bytes_needed)
-{
- ERREXIT(cinfo, JERR_NO_BACKING_STORE);
-}
-
-
-/*
- * These routines take care of any system-dependent initialization and
- * cleanup required. Here, there isn't any.
- */
-
-GLOBAL(long)
-jpeg_mem_init (j_common_ptr cinfo)
-{
- return 0; /* just set max_memory_to_use to 0 */
-}
-
-GLOBAL(void)
-jpeg_mem_term (j_common_ptr cinfo)
-{
- /* no work */
-}
diff --git a/libjpegtwrp/jmemsys.h b/libjpegtwrp/jmemsys.h
deleted file mode 100644
index 2ed1c63a1..000000000
--- a/libjpegtwrp/jmemsys.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * jmemsys.h
- *
- * Copyright (C) 1992-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This include file defines the interface between the system-independent
- * and system-dependent portions of the JPEG memory manager. No other
- * modules need include it. (The system-independent portion is jmemmgr.c;
- * there are several different versions of the system-dependent portion.)
- *
- * This file works as-is for the system-dependent memory managers supplied
- * in the IJG distribution. You may need to modify it if you write a
- * custom memory manager. If system-dependent changes are needed in
- * this file, the best method is to #ifdef them based on a configuration
- * symbol supplied in jconfig.h, as we have done with USE_MSDOS_MEMMGR
- * and USE_MAC_MEMMGR.
- */
-
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jpeg_get_small jGetSmall
-#define jpeg_free_small jFreeSmall
-#define jpeg_get_large jGetLarge
-#define jpeg_free_large jFreeLarge
-#define jpeg_mem_available jMemAvail
-#define jpeg_open_backing_store jOpenBackStore
-#define jpeg_mem_init jMemInit
-#define jpeg_mem_term jMemTerm
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-
-/*
- * These two functions are used to allocate and release small chunks of
- * memory. (Typically the total amount requested through jpeg_get_small is
- * no more than 20K or so; this will be requested in chunks of a few K each.)
- * Behavior should be the same as for the standard library functions malloc
- * and free; in particular, jpeg_get_small must return NULL on failure.
- * On most systems, these ARE malloc and free. jpeg_free_small is passed the
- * size of the object being freed, just in case it's needed.
- * On an 80x86 machine using small-data memory model, these manage near heap.
- */
-
-EXTERN(void *) jpeg_get_small JPP((j_common_ptr cinfo, size_t sizeofobject));
-EXTERN(void) jpeg_free_small JPP((j_common_ptr cinfo, void * object,
- size_t sizeofobject));
-
-/*
- * These two functions are used to allocate and release large chunks of
- * memory (up to the total free space designated by jpeg_mem_available).
- * The interface is the same as above, except that on an 80x86 machine,
- * far pointers are used. On most other machines these are identical to
- * the jpeg_get/free_small routines; but we keep them separate anyway,
- * in case a different allocation strategy is desirable for large chunks.
- */
-
-EXTERN(void FAR *) jpeg_get_large JPP((j_common_ptr cinfo,
- size_t sizeofobject));
-EXTERN(void) jpeg_free_large JPP((j_common_ptr cinfo, void FAR * object,
- size_t sizeofobject));
-
-/*
- * The macro MAX_ALLOC_CHUNK designates the maximum number of bytes that may
- * be requested in a single call to jpeg_get_large (and jpeg_get_small for that
- * matter, but that case should never come into play). This macro is needed
- * to model the 64Kb-segment-size limit of far addressing on 80x86 machines.
- * On those machines, we expect that jconfig.h will provide a proper value.
- * On machines with 32-bit flat address spaces, any large constant may be used.
- *
- * NB: jmemmgr.c expects that MAX_ALLOC_CHUNK will be representable as type
- * size_t and will be a multiple of sizeof(align_type).
- */
-
-#ifndef MAX_ALLOC_CHUNK /* may be overridden in jconfig.h */
-#define MAX_ALLOC_CHUNK 1000000000L
-#endif
-
-/*
- * This routine computes the total space still available for allocation by
- * jpeg_get_large. If more space than this is needed, backing store will be
- * used. NOTE: any memory already allocated must not be counted.
- *
- * There is a minimum space requirement, corresponding to the minimum
- * feasible buffer sizes; jmemmgr.c will request that much space even if
- * jpeg_mem_available returns zero. The maximum space needed, enough to hold
- * all working storage in memory, is also passed in case it is useful.
- * Finally, the total space already allocated is passed. If no better
- * method is available, cinfo->mem->max_memory_to_use - already_allocated
- * is often a suitable calculation.
- *
- * It is OK for jpeg_mem_available to underestimate the space available
- * (that'll just lead to more backing-store access than is really necessary).
- * However, an overestimate will lead to failure. Hence it's wise to subtract
- * a slop factor from the true available space. 5% should be enough.
- *
- * On machines with lots of virtual memory, any large constant may be returned.
- * Conversely, zero may be returned to always use the minimum amount of memory.
- */
-
-EXTERN(long) jpeg_mem_available JPP((j_common_ptr cinfo,
- long min_bytes_needed,
- long max_bytes_needed,
- long already_allocated));
-
-
-/*
- * This structure holds whatever state is needed to access a single
- * backing-store object. The read/write/close method pointers are called
- * by jmemmgr.c to manipulate the backing-store object; all other fields
- * are private to the system-dependent backing store routines.
- */
-
-#define TEMP_NAME_LENGTH 64 /* max length of a temporary file's name */
-
-
-#ifdef USE_MSDOS_MEMMGR /* DOS-specific junk */
-
-typedef unsigned short XMSH; /* type of extended-memory handles */
-typedef unsigned short EMSH; /* type of expanded-memory handles */
-
-typedef union {
- short file_handle; /* DOS file handle if it's a temp file */
- XMSH xms_handle; /* handle if it's a chunk of XMS */
- EMSH ems_handle; /* handle if it's a chunk of EMS */
-} handle_union;
-
-#endif /* USE_MSDOS_MEMMGR */
-
-#ifdef USE_MAC_MEMMGR /* Mac-specific junk */
-#include <Files.h>
-#endif /* USE_MAC_MEMMGR */
-
-
-typedef struct backing_store_struct * backing_store_ptr;
-
-typedef struct backing_store_struct {
- /* Methods for reading/writing/closing this backing-store object */
- JMETHOD(void, read_backing_store, (j_common_ptr cinfo,
- backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count));
- JMETHOD(void, write_backing_store, (j_common_ptr cinfo,
- backing_store_ptr info,
- void FAR * buffer_address,
- long file_offset, long byte_count));
- JMETHOD(void, close_backing_store, (j_common_ptr cinfo,
- backing_store_ptr info));
-
- /* Private fields for system-dependent backing-store management */
-#ifdef USE_MSDOS_MEMMGR
- /* For the MS-DOS manager (jmemdos.c), we need: */
- handle_union handle; /* reference to backing-store storage object */
- char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */
-#else
-#ifdef USE_MAC_MEMMGR
- /* For the Mac manager (jmemmac.c), we need: */
- short temp_file; /* file reference number to temp file */
- FSSpec tempSpec; /* the FSSpec for the temp file */
- char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */
-#else
-#ifdef USE_ANDROID_ASHMEM
- short temp_file; /* file reference number to temp file */
- unsigned char* addr; /* the memory address mapped to ashmem */
- long size; /* the requested ashmem size */
-#else
- /* For a typical implementation with temp files, we need: */
- FILE * temp_file; /* stdio reference to temp file */
- char temp_name[TEMP_NAME_LENGTH]; /* name of temp file */
-#endif
-#endif
-#endif
-} backing_store_info;
-
-
-/*
- * Initial opening of a backing-store object. This must fill in the
- * read/write/close pointers in the object. The read/write routines
- * may take an error exit if the specified maximum file size is exceeded.
- * (If jpeg_mem_available always returns a large value, this routine can
- * just take an error exit.)
- */
-
-EXTERN(void) jpeg_open_backing_store JPP((j_common_ptr cinfo,
- backing_store_ptr info,
- long total_bytes_needed));
-
-
-/*
- * These routines take care of any system-dependent initialization and
- * cleanup required. jpeg_mem_init will be called before anything is
- * allocated (and, therefore, nothing in cinfo is of use except the error
- * manager pointer). It should return a suitable default value for
- * max_memory_to_use; this may subsequently be overridden by the surrounding
- * application. (Note that max_memory_to_use is only important if
- * jpeg_mem_available chooses to consult it ... no one else will.)
- * jpeg_mem_term may assume that all requested memory has been freed and that
- * all opened backing-store objects have been closed.
- */
-
-EXTERN(long) jpeg_mem_init JPP((j_common_ptr cinfo));
-EXTERN(void) jpeg_mem_term JPP((j_common_ptr cinfo));
diff --git a/libjpegtwrp/jmorecfg.h b/libjpegtwrp/jmorecfg.h
deleted file mode 100644
index 236bbcbc9..000000000
--- a/libjpegtwrp/jmorecfg.h
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * jmorecfg.h
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains additional configuration options that customize the
- * JPEG software for special applications or support machine-dependent
- * optimizations. Most users will not need to touch this file.
- */
-
-/*
- * Define ANDROID_RGB to enable specific optimizations for Android
- * JCS_RGBA_8888 support
- * JCS_RGB_565 support
- *
- */
-
-#define ANDROID_RGB
-
-#ifdef ANDROID_RGB
-#define PACK_SHORT_565(r,g,b) ((((r)<<8)&0xf800)|(((g)<<3)&0x7E0)|((b)>>3))
-#define PACK_TWO_PIXELS(l,r) ((r<<16) | l)
-#define PACK_NEED_ALIGNMENT(ptr) (((int)(ptr))&3)
-#define WRITE_TWO_PIXELS(addr, pixels) do { \
- ((INT16*)(addr))[0] = (pixels); \
- ((INT16*)(addr))[1] = (pixels)>>16; \
- } while(0)
-#define WRITE_TWO_ALIGNED_PIXELS(addr, pixels) ((*(INT32*)(addr)) = pixels)
-#define DITHER_565_R(r, dither) ((r) + ((dither)&0xFF))
-#define DITHER_565_G(g, dither) ((g) + (((dither)&0xFF)>>1))
-#define DITHER_565_B(b, dither) ((b) + ((dither)&0xFF))
-#endif
-
-/*
- * Define BITS_IN_JSAMPLE as either
- * 8 for 8-bit sample values (the usual setting)
- * 12 for 12-bit sample values
- * Only 8 and 12 are legal data precisions for lossy JPEG according to the
- * JPEG standard, and the IJG code does not support anything else!
- * We do not support run-time selection of data precision, sorry.
- */
-
-#define BITS_IN_JSAMPLE 8 /* use 8 or 12 */
-
-
-/*
- * Maximum number of components (color channels) allowed in JPEG image.
- * To meet the letter of the JPEG spec, set this to 255. However, darn
- * few applications need more than 4 channels (maybe 5 for CMYK + alpha
- * mask). We recommend 10 as a reasonable compromise; use 4 if you are
- * really short on memory. (Each allowed component costs a hundred or so
- * bytes of storage, whether actually used in an image or not.)
- */
-
-#define MAX_COMPONENTS 10 /* maximum number of image components */
-
-
-/*
- * Basic data types.
- * You may need to change these if you have a machine with unusual data
- * type sizes; for example, "char" not 8 bits, "short" not 16 bits,
- * or "long" not 32 bits. We don't care whether "int" is 16 or 32 bits,
- * but it had better be at least 16.
- */
-
-/* Representation of a single sample (pixel element value).
- * We frequently allocate large arrays of these, so it's important to keep
- * them small. But if you have memory to burn and access to char or short
- * arrays is very slow on your hardware, you might want to change these.
- */
-
-#if BITS_IN_JSAMPLE == 8
-/* JSAMPLE should be the smallest type that will hold the values 0..255.
- * You can use a signed char by having GETJSAMPLE mask it with 0xFF.
- */
-
-#ifdef HAVE_UNSIGNED_CHAR
-
-typedef unsigned char JSAMPLE;
-#define GETJSAMPLE(value) ((int) (value))
-
-#else /* not HAVE_UNSIGNED_CHAR */
-
-typedef char JSAMPLE;
-#ifdef CHAR_IS_UNSIGNED
-#define GETJSAMPLE(value) ((int) (value))
-#else
-#define GETJSAMPLE(value) ((int) (value) & 0xFF)
-#endif /* CHAR_IS_UNSIGNED */
-
-#endif /* HAVE_UNSIGNED_CHAR */
-
-#define MAXJSAMPLE 255
-#define CENTERJSAMPLE 128
-
-#endif /* BITS_IN_JSAMPLE == 8 */
-
-
-#if BITS_IN_JSAMPLE == 12
-/* JSAMPLE should be the smallest type that will hold the values 0..4095.
- * On nearly all machines "short" will do nicely.
- */
-
-typedef short JSAMPLE;
-#define GETJSAMPLE(value) ((int) (value))
-
-#define MAXJSAMPLE 4095
-#define CENTERJSAMPLE 2048
-
-#endif /* BITS_IN_JSAMPLE == 12 */
-
-
-/* Representation of a DCT frequency coefficient.
- * This should be a signed value of at least 16 bits; "short" is usually OK.
- * Again, we allocate large arrays of these, but you can change to int
- * if you have memory to burn and "short" is really slow.
- */
-
-typedef short JCOEF;
-
-
-/* Compressed datastreams are represented as arrays of JOCTET.
- * These must be EXACTLY 8 bits wide, at least once they are written to
- * external storage. Note that when using the stdio data source/destination
- * managers, this is also the data type passed to fread/fwrite.
- */
-
-#ifdef HAVE_UNSIGNED_CHAR
-
-typedef unsigned char JOCTET;
-#define GETJOCTET(value) (value)
-
-#else /* not HAVE_UNSIGNED_CHAR */
-
-typedef char JOCTET;
-#ifdef CHAR_IS_UNSIGNED
-#define GETJOCTET(value) (value)
-#else
-#define GETJOCTET(value) ((value) & 0xFF)
-#endif /* CHAR_IS_UNSIGNED */
-
-#endif /* HAVE_UNSIGNED_CHAR */
-
-
-/* These typedefs are used for various table entries and so forth.
- * They must be at least as wide as specified; but making them too big
- * won't cost a huge amount of memory, so we don't provide special
- * extraction code like we did for JSAMPLE. (In other words, these
- * typedefs live at a different point on the speed/space tradeoff curve.)
- */
-
-/* UINT8 must hold at least the values 0..255. */
-
-#ifdef HAVE_UNSIGNED_CHAR
-typedef unsigned char UINT8;
-#else /* not HAVE_UNSIGNED_CHAR */
-#ifdef CHAR_IS_UNSIGNED
-typedef char UINT8;
-#else /* not CHAR_IS_UNSIGNED */
-typedef short UINT8;
-#endif /* CHAR_IS_UNSIGNED */
-#endif /* HAVE_UNSIGNED_CHAR */
-
-/* UINT16 must hold at least the values 0..65535. */
-
-#ifdef HAVE_UNSIGNED_SHORT
-typedef unsigned short UINT16;
-#else /* not HAVE_UNSIGNED_SHORT */
-typedef unsigned int UINT16;
-#endif /* HAVE_UNSIGNED_SHORT */
-
-/* INT16 must hold at least the values -32768..32767. */
-
-#ifndef XMD_H /* X11/xmd.h correctly defines INT16 */
-typedef short INT16;
-#endif
-
-/* INT32 must hold at least signed 32-bit values. */
-
-#ifndef XMD_H /* X11/xmd.h correctly defines INT32 */
-typedef long INT32;
-#endif
-
-/* Datatype used for image dimensions. The JPEG standard only supports
- * images up to 64K*64K due to 16-bit fields in SOF markers. Therefore
- * "unsigned int" is sufficient on all machines. However, if you need to
- * handle larger images and you don't mind deviating from the spec, you
- * can change this datatype.
- */
-
-typedef unsigned int JDIMENSION;
-
-#define JPEG_MAX_DIMENSION 65500L /* a tad under 64K to prevent overflows */
-
-
-/* These macros are used in all function definitions and extern declarations.
- * You could modify them if you need to change function linkage conventions;
- * in particular, you'll need to do that to make the library a Windows DLL.
- * Another application is to make all functions global for use with debuggers
- * or code profilers that require it.
- */
-
-/* a function called through method pointers: */
-#define METHODDEF(type) static type
-/* a function used only in its module: */
-#define LOCAL(type) static type
-/* a function referenced thru EXTERNs: */
-#define GLOBAL(type) type
-/* a reference to a GLOBAL function: */
-#define EXTERN(type) extern type
-
-
-/* This macro is used to declare a "method", that is, a function pointer.
- * We want to supply prototype parameters if the compiler can cope.
- * Note that the arglist parameter must be parenthesized!
- * Again, you can customize this if you need special linkage keywords.
- */
-
-#ifdef HAVE_PROTOTYPES
-#define JMETHOD(type,methodname,arglist) type (*methodname) arglist
-#else
-#define JMETHOD(type,methodname,arglist) type (*methodname) ()
-#endif
-
-
-/* Here is the pseudo-keyword for declaring pointers that must be "far"
- * on 80x86 machines. Most of the specialized coding for 80x86 is handled
- * by just saying "FAR *" where such a pointer is needed. In a few places
- * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol.
- */
-
-#ifdef NEED_FAR_POINTERS
-#define FAR far
-#else
-#define FAR
-#endif
-
-
-/*
- * On a few systems, type boolean and/or its values FALSE, TRUE may appear
- * in standard header files. Or you may have conflicts with application-
- * specific header files that you want to include together with these files.
- * Defining HAVE_BOOLEAN before including jpeglib.h should make it work.
- */
-
-#ifndef HAVE_BOOLEAN
-typedef int boolean;
-#endif
-#ifndef FALSE /* in case these macros already exist */
-#define FALSE 0 /* values of boolean */
-#endif
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-
-/*
- * The remaining options affect code selection within the JPEG library,
- * but they don't need to be visible to most applications using the library.
- * To minimize application namespace pollution, the symbols won't be
- * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined.
- */
-
-#ifdef JPEG_INTERNALS
-#define JPEG_INTERNAL_OPTIONS
-#endif
-
-#ifdef JPEG_INTERNAL_OPTIONS
-
-
-/*
- * These defines indicate whether to include various optional functions.
- * Undefining some of these symbols will produce a smaller but less capable
- * library. Note that you can leave certain source files out of the
- * compilation/linking process if you've #undef'd the corresponding symbols.
- * (You may HAVE to do that if your compiler doesn't like null source files.)
- */
-
-/* Arithmetic coding is unsupported for legal reasons. Complaints to IBM. */
-
-/* Capability options common to encoder and decoder: */
-
-#define DCT_ISLOW_SUPPORTED /* slow but accurate integer algorithm */
-#define DCT_IFAST_SUPPORTED /* faster, less accurate integer method */
-#define DCT_FLOAT_SUPPORTED /* floating-point: accurate, fast on fast HW */
-
-/* Encoder capability options: */
-
-#undef C_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */
-#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
-#define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/
-#define ENTROPY_OPT_SUPPORTED /* Optimization of entropy coding parms? */
-/* Note: if you selected 12-bit data precision, it is dangerous to turn off
- * ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only good for 8-bit
- * precision, so jchuff.c normally uses entropy optimization to compute
- * usable tables for higher precision. If you don't want to do optimization,
- * you'll have to supply different default Huffman tables.
- * The exact same statements apply for progressive JPEG: the default tables
- * don't work for progressive mode. (This may get fixed, however.)
- */
-#define INPUT_SMOOTHING_SUPPORTED /* Input image smoothing option? */
-
-/* Decoder capability options: */
-
-#undef D_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */
-#define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
-#define D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/
-#define SAVE_MARKERS_SUPPORTED /* jpeg_save_markers() needed? */
-#define BLOCK_SMOOTHING_SUPPORTED /* Block smoothing? (Progressive only) */
-#define IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? */
-#undef UPSAMPLE_SCALING_SUPPORTED /* Output rescaling at upsample stage? */
-#define UPSAMPLE_MERGING_SUPPORTED /* Fast path for sloppy upsampling? */
-#define QUANT_1PASS_SUPPORTED /* 1-pass color quantization? */
-#define QUANT_2PASS_SUPPORTED /* 2-pass color quantization? */
-
-/* more capability options later, no doubt */
-
-
-/*
- * Ordering of RGB data in scanlines passed to or from the application.
- * If your application wants to deal with data in the order B,G,R, just
- * change these macros. You can also deal with formats such as R,G,B,X
- * (one extra byte per pixel) by changing RGB_PIXELSIZE. Note that changing
- * the offsets will also change the order in which colormap data is organized.
- * RESTRICTIONS:
- * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats.
- * 2. These macros only affect RGB<=>YCbCr color conversion, so they are not
- * useful if you are using JPEG color spaces other than YCbCr or grayscale.
- * 3. The color quantizer modules will not behave desirably if RGB_PIXELSIZE
- * is not 3 (they don't understand about dummy color components!). So you
- * can't use color quantization if you change that value.
- */
-
-#define RGB_RED 0 /* Offset of Red in an RGB scanline element */
-#define RGB_GREEN 1 /* Offset of Green */
-#define RGB_BLUE 2 /* Offset of Blue */
-#ifdef ANDROID_RGB
-#define RGB_ALPHA 3 /* Offset of Alpha */
-#endif
-#define RGB_PIXELSIZE 3 /* JSAMPLEs per RGB scanline element */
-
-/* Definitions for speed-related optimizations. */
-
-
-/* If your compiler supports inline functions, define INLINE
- * as the inline keyword; otherwise define it as empty.
- */
-
-#ifndef INLINE
-#ifdef __GNUC__ /* for instance, GNU C knows about inline */
-#define INLINE __inline__
-#endif
-#ifndef INLINE
-#define INLINE /* default is to define it as empty */
-#endif
-#endif
-
-
-/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying
- * two 16-bit shorts is faster than multiplying two ints. Define MULTIPLIER
- * as short on such a machine. MULTIPLIER must be at least 16 bits wide.
- */
-
-#ifndef MULTIPLIER
-#define MULTIPLIER int /* type for fastest integer multiply */
-#endif
-
-
-/* FAST_FLOAT should be either float or double, whichever is done faster
- * by your compiler. (Note that this type is only used in the floating point
- * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.)
- * Typically, float is faster in ANSI C compilers, while double is faster in
- * pre-ANSI compilers (because they insist on converting to double anyway).
- * The code below therefore chooses float if we have ANSI-style prototypes.
- */
-
-#ifndef FAST_FLOAT
-#ifdef HAVE_PROTOTYPES
-#define FAST_FLOAT float
-#else
-#define FAST_FLOAT double
-#endif
-#endif
-
-#endif /* JPEG_INTERNAL_OPTIONS */
diff --git a/libjpegtwrp/jpegint.h b/libjpegtwrp/jpegint.h
deleted file mode 100644
index 7bf9ffe95..000000000
--- a/libjpegtwrp/jpegint.h
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * jpegint.h
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file provides common declarations for the various JPEG modules.
- * These declarations are considered internal to the JPEG library; most
- * applications using the library shouldn't need to include this file.
- */
-
-
-/* Declarations for both compression & decompression */
-
-typedef enum { /* Operating modes for buffer controllers */
- JBUF_PASS_THRU, /* Plain stripwise operation */
- /* Remaining modes require a full-image buffer to have been created */
- JBUF_SAVE_SOURCE, /* Run source subobject only, save output */
- JBUF_CRANK_DEST, /* Run dest subobject only, using saved data */
- JBUF_SAVE_AND_PASS /* Run both subobjects, save output */
-} J_BUF_MODE;
-
-/* Values of global_state field (jdapi.c has some dependencies on ordering!) */
-#define CSTATE_START 100 /* after create_compress */
-#define CSTATE_SCANNING 101 /* start_compress done, write_scanlines OK */
-#define CSTATE_RAW_OK 102 /* start_compress done, write_raw_data OK */
-#define CSTATE_WRCOEFS 103 /* jpeg_write_coefficients done */
-#define DSTATE_START 200 /* after create_decompress */
-#define DSTATE_INHEADER 201 /* reading header markers, no SOS yet */
-#define DSTATE_READY 202 /* found SOS, ready for start_decompress */
-#define DSTATE_PRELOAD 203 /* reading multiscan file in start_decompress*/
-#define DSTATE_PRESCAN 204 /* performing dummy pass for 2-pass quant */
-#define DSTATE_SCANNING 205 /* start_decompress done, read_scanlines OK */
-#define DSTATE_RAW_OK 206 /* start_decompress done, read_raw_data OK */
-#define DSTATE_BUFIMAGE 207 /* expecting jpeg_start_output */
-#define DSTATE_BUFPOST 208 /* looking for SOS/EOI in jpeg_finish_output */
-#define DSTATE_RDCOEFS 209 /* reading file in jpeg_read_coefficients */
-#define DSTATE_STOPPING 210 /* looking for EOI in jpeg_finish_decompress */
-
-
-/* Declarations for compression modules */
-
-/* Master control module */
-struct jpeg_comp_master {
- JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo));
- JMETHOD(void, pass_startup, (j_compress_ptr cinfo));
- JMETHOD(void, finish_pass, (j_compress_ptr cinfo));
-
- /* State variables made visible to other modules */
- boolean call_pass_startup; /* True if pass_startup must be called */
- boolean is_last_pass; /* True during last pass */
-};
-
-/* Main buffer control (downsampled-data buffer) */
-struct jpeg_c_main_controller {
- JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode));
- JMETHOD(void, process_data, (j_compress_ptr cinfo,
- JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
- JDIMENSION in_rows_avail));
-};
-
-/* Compression preprocessing (downsampling input buffer control) */
-struct jpeg_c_prep_controller {
- JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode));
- JMETHOD(void, pre_process_data, (j_compress_ptr cinfo,
- JSAMPARRAY input_buf,
- JDIMENSION *in_row_ctr,
- JDIMENSION in_rows_avail,
- JSAMPIMAGE output_buf,
- JDIMENSION *out_row_group_ctr,
- JDIMENSION out_row_groups_avail));
-};
-
-/* Coefficient buffer control */
-struct jpeg_c_coef_controller {
- JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode));
- JMETHOD(boolean, compress_data, (j_compress_ptr cinfo,
- JSAMPIMAGE input_buf));
-};
-
-/* Colorspace conversion */
-struct jpeg_color_converter {
- JMETHOD(void, start_pass, (j_compress_ptr cinfo));
- JMETHOD(void, color_convert, (j_compress_ptr cinfo,
- JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
- JDIMENSION output_row, int num_rows));
-};
-
-/* Downsampling */
-struct jpeg_downsampler {
- JMETHOD(void, start_pass, (j_compress_ptr cinfo));
- JMETHOD(void, downsample, (j_compress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION in_row_index,
- JSAMPIMAGE output_buf,
- JDIMENSION out_row_group_index));
-
- boolean need_context_rows; /* TRUE if need rows above & below */
-};
-
-/* Forward DCT (also controls coefficient quantization) */
-struct jpeg_forward_dct {
- JMETHOD(void, start_pass, (j_compress_ptr cinfo));
- /* perhaps this should be an array??? */
- JMETHOD(void, forward_DCT, (j_compress_ptr cinfo,
- jpeg_component_info * compptr,
- JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
- JDIMENSION start_row, JDIMENSION start_col,
- JDIMENSION num_blocks));
-};
-
-/* Entropy encoding */
-struct jpeg_entropy_encoder {
- JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics));
- JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data));
- JMETHOD(void, finish_pass, (j_compress_ptr cinfo));
-};
-
-/* Marker writing */
-struct jpeg_marker_writer {
- JMETHOD(void, write_file_header, (j_compress_ptr cinfo));
- JMETHOD(void, write_frame_header, (j_compress_ptr cinfo));
- JMETHOD(void, write_scan_header, (j_compress_ptr cinfo));
- JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo));
- JMETHOD(void, write_tables_only, (j_compress_ptr cinfo));
- /* These routines are exported to allow insertion of extra markers */
- /* Probably only COM and APPn markers should be written this way */
- JMETHOD(void, write_marker_header, (j_compress_ptr cinfo, int marker,
- unsigned int datalen));
- JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val));
-};
-
-
-/* Declarations for decompression modules */
-
-/* Master control module */
-struct jpeg_decomp_master {
- JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo));
- JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo));
-
- /* State variables made visible to other modules */
- boolean is_dummy_pass; /* True during 1st pass for 2-pass quant */
-};
-
-/* Input control module */
-struct jpeg_input_controller {
- JMETHOD(int, consume_input, (j_decompress_ptr cinfo));
- JMETHOD(int, consume_input_build_huffman_index, (j_decompress_ptr cinfo,
- huffman_index *index, int scan_count));
- JMETHOD(int, consume_markers, (j_decompress_ptr cinfo,
- huffman_index *index, int scan_count));
- JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo));
- JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo));
- JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo));
-
- /* State variables made visible to other modules */
- boolean has_multiple_scans; /* True if file has multiple scans */
- boolean eoi_reached; /* True when EOI has been consumed */
-};
-
-/* Main buffer control (downsampled-data buffer) */
-struct jpeg_d_main_controller {
- JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode));
- JMETHOD(void, process_data, (j_decompress_ptr cinfo,
- JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
- JDIMENSION out_rows_avail));
-};
-
-/* Coefficient buffer control */
-struct jpeg_d_coef_controller {
- JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo));
- JMETHOD(int, consume_data, (j_decompress_ptr cinfo));
- JMETHOD(int, consume_data_build_huffman_index, (j_decompress_ptr cinfo,
- huffman_index* index, int scan_count));
- JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo));
- JMETHOD(int, decompress_data, (j_decompress_ptr cinfo,
- JSAMPIMAGE output_buf));
- /* Pointer to array of coefficient virtual arrays, or NULL if none */
- jvirt_barray_ptr *coef_arrays;
-
- /* column number of the first and last tile, respectively */
- int column_left_boundary;
- int column_right_boundary;
-
- /* column number of the first and last MCU, respectively */
- int MCU_column_left_boundary;
- int MCU_column_right_boundary;
-
- /* the number of MCU columns to skip from the indexed MCU, iM,
- * to the requested MCU boundary, rM, where iM is the MCU that we sample
- * into our index and is the nearest one to the left of rM.
- */
- int MCU_columns_to_skip;
-};
-
-/* Decompression postprocessing (color quantization buffer control) */
-struct jpeg_d_post_controller {
- JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode));
- JMETHOD(void, post_process_data, (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf,
- JDIMENSION *in_row_group_ctr,
- JDIMENSION in_row_groups_avail,
- JSAMPARRAY output_buf,
- JDIMENSION *out_row_ctr,
- JDIMENSION out_rows_avail));
-};
-
-/* Marker reading & parsing */
-struct jpeg_marker_reader {
- JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo));
- /* Read markers until SOS or EOI.
- * Returns same codes as are defined for jpeg_consume_input:
- * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
- */
- JMETHOD(int, read_markers, (j_decompress_ptr cinfo));
- JMETHOD(void, get_sos_marker_position, (j_decompress_ptr cinfo,
- huffman_index *index));
- /* Read a restart marker --- exported for use by entropy decoder only */
- jpeg_marker_parser_method read_restart_marker;
-
- /* State of marker reader --- nominally internal, but applications
- * supplying COM or APPn handlers might like to know the state.
- */
- boolean saw_SOI; /* found SOI? */
- boolean saw_SOF; /* found SOF? */
- int next_restart_num; /* next restart number expected (0-7) */
- int current_sos_marker_position;
- unsigned int discarded_bytes; /* # of bytes skipped looking for a marker */
-};
-
-/* Entropy decoding */
-struct jpeg_entropy_decoder {
- JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
- JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo,
- JBLOCKROW *MCU_data));
- JMETHOD(boolean, decode_mcu_discard_coef, (j_decompress_ptr cinfo));
- JMETHOD(void, configure_huffman_decoder, (j_decompress_ptr cinfo,
- huffman_offset_data offset));
- JMETHOD(void, get_huffman_decoder_configuration, (j_decompress_ptr cinfo,
- huffman_offset_data *offset));
-
- /* This is here to share code between baseline and progressive decoders; */
- /* other modules probably should not use it */
- boolean insufficient_data; /* set TRUE after emitting warning */
-
- huffman_index *index;
-};
-
-/* Inverse DCT (also performs dequantization) */
-typedef JMETHOD(void, inverse_DCT_method_ptr,
- (j_decompress_ptr cinfo, jpeg_component_info * compptr,
- JCOEFPTR coef_block,
- JSAMPARRAY output_buf, JDIMENSION output_col));
-
-struct jpeg_inverse_dct {
- JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
- /* It is useful to allow each component to have a separate IDCT method. */
- inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS];
-};
-
-/* Upsampling (note that upsampler must also call color converter) */
-struct jpeg_upsampler {
- JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
- JMETHOD(void, upsample, (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf,
- JDIMENSION *in_row_group_ctr,
- JDIMENSION in_row_groups_avail,
- JSAMPARRAY output_buf,
- JDIMENSION *out_row_ctr,
- JDIMENSION out_rows_avail));
-
- boolean need_context_rows; /* TRUE if need rows above & below */
-};
-
-/* Colorspace conversion */
-struct jpeg_color_deconverter {
- JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
- JMETHOD(void, color_convert, (j_decompress_ptr cinfo,
- JSAMPIMAGE input_buf, JDIMENSION input_row,
- JSAMPARRAY output_buf, int num_rows));
-};
-
-/* Color quantization or color precision reduction */
-struct jpeg_color_quantizer {
- JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan));
- JMETHOD(void, color_quantize, (j_decompress_ptr cinfo,
- JSAMPARRAY input_buf, JSAMPARRAY output_buf,
- int num_rows));
- JMETHOD(void, finish_pass, (j_decompress_ptr cinfo));
- JMETHOD(void, new_color_map, (j_decompress_ptr cinfo));
-};
-
-#ifdef ANDROID_JPEG_USE_VENUM
-
-/* IDCT routines */
-EXTERN (void) idct_1x1_venum (INT16 * coeffPtr, INT16 * samplePtr, INT32 stride);
-EXTERN (void) idct_2x2_venum (INT16 * coeffPtr, INT16 * samplePtr, INT32 stride);
-EXTERN (void) idct_4x4_venum (INT16 * coeffPtr, INT16 * samplePtr, INT32 stride);
-EXTERN (void) idct_8x8_venum (INT16 * coeffPtr, INT16 * samplePtr, INT32 stride);
-
-#ifndef ANDROID_JPEG_DISABLE_VENUM_YCC_RGB_565
-/* Color conversion routines */
-EXTERN (void) yvup2rgb565_venum (UINT8 *pLumaLine,
- UINT8 *pCrLine,
- UINT8 *pCbLine,
- UINT8 *pRGB565Line,
- JDIMENSION nLineWidth);
-EXTERN (void) yyvup2rgb565_venum (UINT8 * pLumaLine,
- UINT8 *pCrLine,
- UINT8 *pCbLine,
- UINT8 * pRGB565Line,
- JDIMENSION nLineWidth);
-#endif
-EXTERN (void) yvup2bgr888_venum (UINT8 * pLumaLine,
- UINT8 *pCrLine,
- UINT8 *pCbLine,
- UINT8 * pBGR888Line,
- JDIMENSION nLineWidth);
-EXTERN (void) yyvup2bgr888_venum (UINT8 * pLumaLine,
- UINT8 *pCrLine,
- UINT8 *pCbLine,
- UINT8 * pBGR888Line,
- JDIMENSION nLineWidth);
-EXTERN (void) yvup2abgr8888_venum (UINT8 * pLumaLine,
- UINT8 *pCrLine,
- UINT8 *pCbLine,
- UINT8 * pABGR888Line,
- JDIMENSION nLineWidth);
-EXTERN (void) yyvup2abgr8888_venum (UINT8 * pLumaLine,
- UINT8 *pCrLine,
- UINT8 *pCbLine,
- UINT8 * pABGR888Line,
- JDIMENSION nLineWidth);
-#endif
-
-/* Miscellaneous useful macros */
-
-#undef MAX
-#define MAX(a,b) ((a) > (b) ? (a) : (b))
-#undef MIN
-#define MIN(a,b) ((a) < (b) ? (a) : (b))
-
-
-/* We assume that right shift corresponds to signed division by 2 with
- * rounding towards minus infinity. This is correct for typical "arithmetic
- * shift" instructions that shift in copies of the sign bit. But some
- * C compilers implement >> with an unsigned shift. For these machines you
- * must define RIGHT_SHIFT_IS_UNSIGNED.
- * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity.
- * It is only applied with constant shift counts. SHIFT_TEMPS must be
- * included in the variables of any routine using RIGHT_SHIFT.
- */
-
-#ifdef RIGHT_SHIFT_IS_UNSIGNED
-#define SHIFT_TEMPS INT32 shift_temp;
-#define RIGHT_SHIFT(x,shft) \
- ((shift_temp = (x)) < 0 ? \
- (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \
- (shift_temp >> (shft)))
-#else
-#define SHIFT_TEMPS
-#define RIGHT_SHIFT(x,shft) ((x) >> (shft))
-#endif
-
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jinit_compress_master jICompress
-#define jinit_c_master_control jICMaster
-#define jinit_c_main_controller jICMainC
-#define jinit_c_prep_controller jICPrepC
-#define jinit_c_coef_controller jICCoefC
-#define jinit_color_converter jICColor
-#define jinit_downsampler jIDownsampler
-#define jinit_forward_dct jIFDCT
-#define jinit_huff_encoder jIHEncoder
-#define jinit_phuff_encoder jIPHEncoder
-#define jinit_marker_writer jIMWriter
-#define jinit_master_decompress jIDMaster
-#define jinit_d_main_controller jIDMainC
-#define jinit_d_coef_controller jIDCoefC
-#define jinit_d_post_controller jIDPostC
-#define jinit_input_controller jIInCtlr
-#define jinit_marker_reader jIMReader
-#define jinit_huff_decoder jIHDecoder
-#define jinit_phuff_decoder jIPHDecoder
-#define jinit_inverse_dct jIIDCT
-#define jinit_upsampler jIUpsampler
-#define jinit_color_deconverter jIDColor
-#define jinit_1pass_quantizer jI1Quant
-#define jinit_2pass_quantizer jI2Quant
-#define jinit_merged_upsampler jIMUpsampler
-#define jinit_memory_mgr jIMemMgr
-#define jdiv_round_up jDivRound
-#define jround_up jRound
-#define jcopy_sample_rows jCopySamples
-#define jcopy_block_row jCopyBlocks
-#define jzero_far jZeroFar
-#define jpeg_zigzag_order jZIGTable
-#define jpeg_natural_order jZAGTable
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-
-/* Compression module initialization routines */
-EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo,
- boolean transcode_only));
-EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo,
- boolean need_full_buffer));
-EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo,
- boolean need_full_buffer));
-EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo,
- boolean need_full_buffer));
-EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_phuff_encoder JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo));
-/* Decompression module initialization routines */
-EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo,
- boolean need_full_buffer));
-EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo,
- boolean need_full_buffer));
-EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo,
- boolean need_full_buffer));
-EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_huff_decoder_no_data JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_phuff_decoder JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_1pass_quantizer JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_2pass_quantizer JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_merged_upsampler JPP((j_decompress_ptr cinfo));
-EXTERN(void) jpeg_decompress_per_scan_setup (j_decompress_ptr cinfo);
-/* Memory manager initialization */
-EXTERN(void) jinit_memory_mgr JPP((j_common_ptr cinfo));
-
-/* Utility routines in jutils.c */
-EXTERN(long) jdiv_round_up JPP((long a, long b));
-EXTERN(long) jround_up JPP((long a, long b));
-EXTERN(long) jmin JPP((long a, long b));
-EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row,
- JSAMPARRAY output_array, int dest_row,
- int num_rows, JDIMENSION num_cols));
-EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row,
- JDIMENSION num_blocks));
-EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero));
-
-EXTERN(void) jset_input_stream_position JPP((j_decompress_ptr cinfo,
- int offset));
-EXTERN(void) jset_input_stream_position_bit JPP((j_decompress_ptr cinfo,
- int byte_offset, int bit_left, INT32 buf));
-
-EXTERN(int) jget_input_stream_position JPP((j_decompress_ptr cinfo));
-/* Constant tables in jutils.c */
-#if 0 /* This table is not actually needed in v6a */
-extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */
-#endif
-extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */
-
-/* Suppress undefined-structure complaints if necessary. */
-
-#ifdef INCOMPLETE_TYPES_BROKEN
-#ifndef AM_MEMORY_MANAGER /* only jmemmgr.c defines these */
-struct jvirt_sarray_control { long dummy; };
-struct jvirt_barray_control { long dummy; };
-#endif
-#endif /* INCOMPLETE_TYPES_BROKEN */
diff --git a/libjpegtwrp/jpeglib.h b/libjpegtwrp/jpeglib.h
deleted file mode 100644
index 07e687294..000000000
--- a/libjpegtwrp/jpeglib.h
+++ /dev/null
@@ -1,1184 +0,0 @@
-/*
- * jpeglib.h
- *
- * Copyright (C) 1991-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file defines the application interface for the JPEG library.
- * Most applications using the library need only include this file,
- * and perhaps jerror.h if they want to know the exact error codes.
- */
-
-#ifndef JPEGLIB_H
-#define JPEGLIB_H
-
-/*
- * First we include the configuration files that record how this
- * installation of the JPEG library is set up. jconfig.h can be
- * generated automatically for many systems. jmorecfg.h contains
- * manual configuration options that most people need not worry about.
- */
-
-#ifndef JCONFIG_INCLUDED /* in case jinclude.h already did */
-#include "jconfig.h" /* widely used configuration options */
-#endif
-#include "jmorecfg.h" /* seldom changed options */
-
-
-/* Version ID for the JPEG library.
- * Might be useful for tests like "#if JPEG_LIB_VERSION >= 60".
- */
-
-#define JPEG_LIB_VERSION 62 /* Version 6b */
-
-
-/* Various constants determining the sizes of things.
- * All of these are specified by the JPEG standard, so don't change them
- * if you want to be compatible.
- */
-
-#define DCTSIZE 8 /* The basic DCT block is 8x8 samples */
-#define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */
-#define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */
-#define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */
-#define NUM_ARITH_TBLS 16 /* Arith-coding tables are numbered 0..15 */
-#define MAX_COMPS_IN_SCAN 4 /* JPEG limit on # of components in one scan */
-#define MAX_SAMP_FACTOR 4 /* JPEG limit on sampling factors */
-/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard;
- * the PostScript DCT filter can emit files with many more than 10 blocks/MCU.
- * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU
- * to handle it. We even let you do this from the jconfig.h file. However,
- * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe
- * sometimes emits noncompliant files doesn't mean you should too.
- */
-#define C_MAX_BLOCKS_IN_MCU 10 /* compressor's limit on blocks per MCU */
-#ifndef D_MAX_BLOCKS_IN_MCU
-#define D_MAX_BLOCKS_IN_MCU 10 /* decompressor's limit on blocks per MCU */
-#endif
-
-
-/* Data structures for images (arrays of samples and of DCT coefficients).
- * On 80x86 machines, the image arrays are too big for near pointers,
- * but the pointer arrays can fit in near memory.
- */
-
-typedef JSAMPLE FAR *JSAMPROW; /* ptr to one image row of pixel samples. */
-typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */
-typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */
-
-typedef JCOEF JBLOCK[DCTSIZE2]; /* one block of coefficients */
-typedef JBLOCK FAR *JBLOCKROW; /* pointer to one row of coefficient blocks */
-typedef JBLOCKROW *JBLOCKARRAY; /* a 2-D array of coefficient blocks */
-typedef JBLOCKARRAY *JBLOCKIMAGE; /* a 3-D array of coefficient blocks */
-
-typedef JCOEF FAR *JCOEFPTR; /* useful in a couple of places */
-
-
-/* Types for JPEG compression parameters and working tables. */
-
-
-/* DCT coefficient quantization tables. */
-
-typedef struct {
- /* This array gives the coefficient quantizers in natural array order
- * (not the zigzag order in which they are stored in a JPEG DQT marker).
- * CAUTION: IJG versions prior to v6a kept this array in zigzag order.
- */
- UINT16 quantval[DCTSIZE2]; /* quantization step for each coefficient */
- /* This field is used only during compression. It's initialized FALSE when
- * the table is created, and set TRUE when it's been output to the file.
- * You could suppress output of a table by setting this to TRUE.
- * (See jpeg_suppress_tables for an example.)
- */
- boolean sent_table; /* TRUE when table has been output */
-} JQUANT_TBL;
-
-
-/* Huffman coding tables. */
-
-typedef struct {
- /* These two fields directly represent the contents of a JPEG DHT marker */
- UINT8 bits[17]; /* bits[k] = # of symbols with codes of */
- /* length k bits; bits[0] is unused */
- UINT8 huffval[256]; /* The symbols, in order of incr code length */
- /* This field is used only during compression. It's initialized FALSE when
- * the table is created, and set TRUE when it's been output to the file.
- * You could suppress output of a table by setting this to TRUE.
- * (See jpeg_suppress_tables for an example.)
- */
- boolean sent_table; /* TRUE when table has been output */
-} JHUFF_TBL;
-
-
-/* Basic info about one component (color channel). */
-
-typedef struct {
- /* These values are fixed over the whole image. */
- /* For compression, they must be supplied by parameter setup; */
- /* for decompression, they are read from the SOF marker. */
- int component_id; /* identifier for this component (0..255) */
- int component_index; /* its index in SOF or cinfo->comp_info[] */
- int h_samp_factor; /* horizontal sampling factor (1..4) */
- int v_samp_factor; /* vertical sampling factor (1..4) */
- int quant_tbl_no; /* quantization table selector (0..3) */
- /* These values may vary between scans. */
- /* For compression, they must be supplied by parameter setup; */
- /* for decompression, they are read from the SOS marker. */
- /* The decompressor output side may not use these variables. */
- int dc_tbl_no; /* DC entropy table selector (0..3) */
- int ac_tbl_no; /* AC entropy table selector (0..3) */
-
- /* Remaining fields should be treated as private by applications. */
-
- /* These values are computed during compression or decompression startup: */
- /* Component's size in DCT blocks.
- * Any dummy blocks added to complete an MCU are not counted; therefore
- * these values do not depend on whether a scan is interleaved or not.
- */
- JDIMENSION width_in_blocks;
- JDIMENSION height_in_blocks;
- /* Size of a DCT block in samples. Always DCTSIZE for compression.
- * For decompression this is the size of the output from one DCT block,
- * reflecting any scaling we choose to apply during the IDCT step.
- * Values of 1,2,4,8 are likely to be supported. Note that different
- * components may receive different IDCT scalings.
- */
- int DCT_scaled_size;
- /* The downsampled dimensions are the component's actual, unpadded number
- * of samples at the main buffer (preprocessing/compression interface), thus
- * downsampled_width = ceil(image_width * Hi/Hmax)
- * and similarly for height. For decompression, IDCT scaling is included, so
- * downsampled_width = ceil(image_width * Hi/Hmax * DCT_scaled_size/DCTSIZE)
- */
- JDIMENSION downsampled_width; /* actual width in samples */
- JDIMENSION downsampled_height; /* actual height in samples */
- /* This flag is used only for decompression. In cases where some of the
- * components will be ignored (eg grayscale output from YCbCr image),
- * we can skip most computations for the unused components.
- */
- boolean component_needed; /* do we need the value of this component? */
-
- /* These values are computed before starting a scan of the component. */
- /* The decompressor output side may not use these variables. */
- int MCU_width; /* number of blocks per MCU, horizontally */
- int MCU_height; /* number of blocks per MCU, vertically */
- int MCU_blocks; /* MCU_width * MCU_height */
- int MCU_sample_width; /* MCU width in samples, MCU_width*DCT_scaled_size */
- int last_col_width; /* # of non-dummy blocks across in last MCU */
- int last_row_height; /* # of non-dummy blocks down in last MCU */
-
- /* Saved quantization table for component; NULL if none yet saved.
- * See jdinput.c comments about the need for this information.
- * This field is currently used only for decompression.
- */
- JQUANT_TBL * quant_table;
-
- /* Private per-component storage for DCT or IDCT subsystem. */
- void * dct_table;
-} jpeg_component_info;
-
-
-/* The script for encoding a multiple-scan file is an array of these: */
-
-typedef struct {
- int comps_in_scan; /* number of components encoded in this scan */
- int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */
- int Ss, Se; /* progressive JPEG spectral selection parms */
- int Ah, Al; /* progressive JPEG successive approx. parms */
-} jpeg_scan_info;
-
-/* The decompressor can save APPn and COM markers in a list of these: */
-
-typedef struct jpeg_marker_struct FAR * jpeg_saved_marker_ptr;
-
-struct jpeg_marker_struct {
- jpeg_saved_marker_ptr next; /* next in list, or NULL */
- UINT8 marker; /* marker code: JPEG_COM, or JPEG_APP0+n */
- unsigned int original_length; /* # bytes of data in the file */
- unsigned int data_length; /* # bytes of data saved at data[] */
- JOCTET FAR * data; /* the data contained in the marker */
- /* the marker length word is not counted in data_length or original_length */
-};
-
-/* Known color spaces. */
-
-typedef enum {
- JCS_UNKNOWN, /* error/unspecified */
- JCS_GRAYSCALE, /* monochrome */
- JCS_RGB, /* red/green/blue */
- JCS_YCbCr, /* Y/Cb/Cr (also known as YUV) */
- JCS_CMYK, /* C/M/Y/K */
- JCS_YCCK, /* Y/Cb/Cr/K */
-#ifdef ANDROID_RGB
- JCS_RGBA_8888, /* red/green/blue/alpha */
- JCS_RGB_565 /* red/green/blue in 565 format */
-#endif
-} J_COLOR_SPACE;
-
-/* DCT/IDCT algorithm options. */
-
-typedef enum {
- JDCT_ISLOW, /* slow but accurate integer algorithm */
- JDCT_IFAST, /* faster, less accurate integer method */
- JDCT_FLOAT /* floating-point: accurate, fast on fast HW */
-} J_DCT_METHOD;
-
-#ifndef JDCT_DEFAULT /* may be overridden in jconfig.h */
-#define JDCT_DEFAULT JDCT_ISLOW
-#endif
-#ifndef JDCT_FASTEST /* may be overridden in jconfig.h */
-#define JDCT_FASTEST JDCT_IFAST
-#endif
-
-/* Dithering options for decompression. */
-
-typedef enum {
- JDITHER_NONE, /* no dithering */
- JDITHER_ORDERED, /* simple ordered dither */
- JDITHER_FS /* Floyd-Steinberg error diffusion dither */
-} J_DITHER_MODE;
-
-
-/* Common fields between JPEG compression and decompression master structs. */
-
-#define jpeg_common_fields \
- struct jpeg_error_mgr * err; /* Error handler module */\
- struct jpeg_memory_mgr * mem; /* Memory manager module */\
- struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\
- void * client_data; /* Available for use by application */\
- boolean is_decompressor; /* So common code can tell which is which */\
- int global_state /* For checking call sequence validity */
-
-/* Routines that are to be used by both halves of the library are declared
- * to receive a pointer to this structure. There are no actual instances of
- * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct.
- */
-struct jpeg_common_struct {
- jpeg_common_fields; /* Fields common to both master struct types */
- /* Additional fields follow in an actual jpeg_compress_struct or
- * jpeg_decompress_struct. All three structs must agree on these
- * initial fields! (This would be a lot cleaner in C++.)
- */
-};
-
-typedef struct jpeg_common_struct * j_common_ptr;
-typedef struct jpeg_compress_struct * j_compress_ptr;
-typedef struct jpeg_decompress_struct * j_decompress_ptr;
-
-
-/* Master record for a compression instance */
-
-struct jpeg_compress_struct {
- jpeg_common_fields; /* Fields shared with jpeg_decompress_struct */
-
- /* Destination for compressed data */
- struct jpeg_destination_mgr * dest;
-
- /* Description of source image --- these fields must be filled in by
- * outer application before starting compression. in_color_space must
- * be correct before you can even call jpeg_set_defaults().
- */
-
- JDIMENSION image_width; /* input image width */
- JDIMENSION image_height; /* input image height */
- int input_components; /* # of color components in input image */
- J_COLOR_SPACE in_color_space; /* colorspace of input image */
-
- double input_gamma; /* image gamma of input image */
-
- /* Compression parameters --- these fields must be set before calling
- * jpeg_start_compress(). We recommend calling jpeg_set_defaults() to
- * initialize everything to reasonable defaults, then changing anything
- * the application specifically wants to change. That way you won't get
- * burnt when new parameters are added. Also note that there are several
- * helper routines to simplify changing parameters.
- */
-
- int data_precision; /* bits of precision in image data */
-
- int num_components; /* # of color components in JPEG image */
- J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */
-
- jpeg_component_info * comp_info;
- /* comp_info[i] describes component that appears i'th in SOF */
-
- JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS];
- /* ptrs to coefficient quantization tables, or NULL if not defined */
-
- JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS];
- JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS];
- /* ptrs to Huffman coding tables, or NULL if not defined */
-
- UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */
- UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */
- UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */
-
- int num_scans; /* # of entries in scan_info array */
- const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */
- /* The default value of scan_info is NULL, which causes a single-scan
- * sequential JPEG file to be emitted. To create a multi-scan file,
- * set num_scans and scan_info to point to an array of scan definitions.
- */
-
- boolean raw_data_in; /* TRUE=caller supplies downsampled data */
- boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */
- boolean optimize_coding; /* TRUE=optimize entropy encoding parms */
- boolean CCIR601_sampling; /* TRUE=first samples are cosited */
- int smoothing_factor; /* 1..100, or 0 for no input smoothing */
- J_DCT_METHOD dct_method; /* DCT algorithm selector */
-
- /* The restart interval can be specified in absolute MCUs by setting
- * restart_interval, or in MCU rows by setting restart_in_rows
- * (in which case the correct restart_interval will be figured
- * for each scan).
- */
- unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */
- int restart_in_rows; /* if > 0, MCU rows per restart interval */
-
- /* Parameters controlling emission of special markers. */
-
- boolean write_JFIF_header; /* should a JFIF marker be written? */
- UINT8 JFIF_major_version; /* What to write for the JFIF version number */
- UINT8 JFIF_minor_version;
- /* These three values are not used by the JPEG code, merely copied */
- /* into the JFIF APP0 marker. density_unit can be 0 for unknown, */
- /* 1 for dots/inch, or 2 for dots/cm. Note that the pixel aspect */
- /* ratio is defined by X_density/Y_density even when density_unit=0. */
- UINT8 density_unit; /* JFIF code for pixel size units */
- UINT16 X_density; /* Horizontal pixel density */
- UINT16 Y_density; /* Vertical pixel density */
- boolean write_Adobe_marker; /* should an Adobe marker be written? */
-
- /* State variable: index of next scanline to be written to
- * jpeg_write_scanlines(). Application may use this to control its
- * processing loop, e.g., "while (next_scanline < image_height)".
- */
-
- JDIMENSION next_scanline; /* 0 .. image_height-1 */
-
- /* Remaining fields are known throughout compressor, but generally
- * should not be touched by a surrounding application.
- */
-
- /*
- * These fields are computed during compression startup
- */
- boolean progressive_mode; /* TRUE if scan script uses progressive mode */
- int max_h_samp_factor; /* largest h_samp_factor */
- int max_v_samp_factor; /* largest v_samp_factor */
-
- JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */
- /* The coefficient controller receives data in units of MCU rows as defined
- * for fully interleaved scans (whether the JPEG file is interleaved or not).
- * There are v_samp_factor * DCTSIZE sample rows of each component in an
- * "iMCU" (interleaved MCU) row.
- */
-
- /*
- * These fields are valid during any one scan.
- * They describe the components and MCUs actually appearing in the scan.
- */
- int comps_in_scan; /* # of JPEG components in this scan */
- jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN];
- /* *cur_comp_info[i] describes component that appears i'th in SOS */
-
- JDIMENSION MCUs_per_row; /* # of MCUs across the image */
- JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */
-
- int blocks_in_MCU; /* # of DCT blocks per MCU */
- int MCU_membership[C_MAX_BLOCKS_IN_MCU];
- /* MCU_membership[i] is index in cur_comp_info of component owning */
- /* i'th block in an MCU */
-
- int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */
-
- /*
- * Links to compression subobjects (methods and private variables of modules)
- */
- struct jpeg_comp_master * master;
- struct jpeg_c_main_controller * main;
- struct jpeg_c_prep_controller * prep;
- struct jpeg_c_coef_controller * coef;
- struct jpeg_marker_writer * marker;
- struct jpeg_color_converter * cconvert;
- struct jpeg_downsampler * downsample;
- struct jpeg_forward_dct * fdct;
- struct jpeg_entropy_encoder * entropy;
- jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */
- int script_space_size;
-};
-
-
-/* Master record for a decompression instance */
-
-struct jpeg_decompress_struct {
- jpeg_common_fields; /* Fields shared with jpeg_compress_struct */
-
- /* Source of compressed data */
- struct jpeg_source_mgr * src;
-
- /* Basic description of image --- filled in by jpeg_read_header(). */
- /* Application may inspect these values to decide how to process image. */
-
- JDIMENSION original_image_width; /* nominal image width (from SOF marker) */
-
- JDIMENSION image_width; /* nominal image width (from SOF marker)
- may be changed by tile decode */
- JDIMENSION image_height; /* nominal image height */
- int num_components; /* # of color components in JPEG image */
- J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */
-
- /* Decompression processing parameters --- these fields must be set before
- * calling jpeg_start_decompress(). Note that jpeg_read_header() initializes
- * them to default values.
- */
-
- J_COLOR_SPACE out_color_space; /* colorspace for output */
-
- unsigned int scale_num, scale_denom; /* fraction by which to scale image */
-
- double output_gamma; /* image gamma wanted in output */
-
- boolean buffered_image; /* TRUE=multiple output passes */
- boolean raw_data_out; /* TRUE=downsampled data wanted */
-
- J_DCT_METHOD dct_method; /* IDCT algorithm selector */
- boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */
- boolean do_block_smoothing; /* TRUE=apply interblock smoothing */
-
- boolean quantize_colors; /* TRUE=colormapped output wanted */
- /* the following are ignored if not quantize_colors: */
- J_DITHER_MODE dither_mode; /* type of color dithering to use */
- boolean two_pass_quantize; /* TRUE=use two-pass color quantization */
- int desired_number_of_colors; /* max # colors to use in created colormap */
- /* these are significant only in buffered-image mode: */
- boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */
- boolean enable_external_quant;/* enable future use of external colormap */
- boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */
-
- /* Description of actual output image that will be returned to application.
- * These fields are computed by jpeg_start_decompress().
- * You can also use jpeg_calc_output_dimensions() to determine these values
- * in advance of calling jpeg_start_decompress().
- */
-
- JDIMENSION output_width; /* scaled image width */
- JDIMENSION output_height; /* scaled image height */
- int out_color_components; /* # of color components in out_color_space */
- int output_components; /* # of color components returned */
- /* output_components is 1 (a colormap index) when quantizing colors;
- * otherwise it equals out_color_components.
- */
- int rec_outbuf_height; /* min recommended height of scanline buffer */
- /* If the buffer passed to jpeg_read_scanlines() is less than this many rows
- * high, space and time will be wasted due to unnecessary data copying.
- * Usually rec_outbuf_height will be 1 or 2, at most 4.
- */
-
- /* When quantizing colors, the output colormap is described by these fields.
- * The application can supply a colormap by setting colormap non-NULL before
- * calling jpeg_start_decompress; otherwise a colormap is created during
- * jpeg_start_decompress or jpeg_start_output.
- * The map has out_color_components rows and actual_number_of_colors columns.
- */
- int actual_number_of_colors; /* number of entries in use */
- JSAMPARRAY colormap; /* The color map as a 2-D pixel array */
-
- /* State variables: these variables indicate the progress of decompression.
- * The application may examine these but must not modify them.
- */
-
- /* Row index of next scanline to be read from jpeg_read_scanlines().
- * Application may use this to control its processing loop, e.g.,
- * "while (output_scanline < output_height)".
- */
- JDIMENSION output_scanline; /* 0 .. output_height-1 */
-
- /* Current input scan number and number of iMCU rows completed in scan.
- * These indicate the progress of the decompressor input side.
- */
- int input_scan_number; /* Number of SOS markers seen so far */
- JDIMENSION input_iMCU_row; /* Number of iMCU rows completed */
-
- /* The "output scan number" is the notional scan being displayed by the
- * output side. The decompressor will not allow output scan/row number
- * to get ahead of input scan/row, but it can fall arbitrarily far behind.
- */
- int output_scan_number; /* Nominal scan number being displayed */
- JDIMENSION output_iMCU_row; /* Number of iMCU rows read */
-
- /* Current progression status. coef_bits[c][i] indicates the precision
- * with which component c's DCT coefficient i (in zigzag order) is known.
- * It is -1 when no data has yet been received, otherwise it is the point
- * transform (shift) value for the most recent scan of the coefficient
- * (thus, 0 at completion of the progression).
- * This pointer is NULL when reading a non-progressive file.
- */
- int (*coef_bits)[DCTSIZE2]; /* -1 or current Al value for each coef */
-
- /* Internal JPEG parameters --- the application usually need not look at
- * these fields. Note that the decompressor output side may not use
- * any parameters that can change between scans.
- */
-
- /* Quantization and Huffman tables are carried forward across input
- * datastreams when processing abbreviated JPEG datastreams.
- */
-
- JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS];
- /* ptrs to coefficient quantization tables, or NULL if not defined */
-
- JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS];
- JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS];
- /* ptrs to Huffman coding tables, or NULL if not defined */
-
- /* These parameters are never carried across datastreams, since they
- * are given in SOF/SOS markers or defined to be reset by SOI.
- */
-
- int data_precision; /* bits of precision in image data */
-
- jpeg_component_info * comp_info;
- /* comp_info[i] describes component that appears i'th in SOF */
-
- boolean tile_decode; /* TRUE if using tile based decoding */
- boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */
- boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */
-
- UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */
- UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */
- UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */
-
- unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */
-
- /* These fields record data obtained from optional markers recognized by
- * the JPEG library.
- */
- boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */
- /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */
- UINT8 JFIF_major_version; /* JFIF version number */
- UINT8 JFIF_minor_version;
- UINT8 density_unit; /* JFIF code for pixel size units */
- UINT16 X_density; /* Horizontal pixel density */
- UINT16 Y_density; /* Vertical pixel density */
- boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */
- UINT8 Adobe_transform; /* Color transform code from Adobe marker */
-
- boolean CCIR601_sampling; /* TRUE=first samples are cosited */
-
- /* Aside from the specific data retained from APPn markers known to the
- * library, the uninterpreted contents of any or all APPn and COM markers
- * can be saved in a list for examination by the application.
- */
- jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */
-
- /* Remaining fields are known throughout decompressor, but generally
- * should not be touched by a surrounding application.
- */
-
- /*
- * These fields are computed during decompression startup
- */
- int max_h_samp_factor; /* largest h_samp_factor */
- int max_v_samp_factor; /* largest v_samp_factor */
-
- int min_DCT_scaled_size; /* smallest DCT_scaled_size of any component */
-
- JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */
- /* The coefficient controller's input and output progress is measured in
- * units of "iMCU" (interleaved MCU) rows. These are the same as MCU rows
- * in fully interleaved JPEG scans, but are used whether the scan is
- * interleaved or not. We define an iMCU row as v_samp_factor DCT block
- * rows of each component. Therefore, the IDCT output contains
- * v_samp_factor*DCT_scaled_size sample rows of a component per iMCU row.
- */
-
- JSAMPLE * sample_range_limit; /* table for fast range-limiting */
-
- /*
- * These fields are valid during any one scan.
- * They describe the components and MCUs actually appearing in the scan.
- * Note that the decompressor output side must not use these fields.
- */
- int comps_in_scan; /* # of JPEG components in this scan */
- jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN];
- /* *cur_comp_info[i] describes component that appears i'th in SOS */
-
- JDIMENSION MCUs_per_row; /* # of MCUs across the image */
- JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */
-
- int blocks_in_MCU; /* # of DCT blocks per MCU */
- int MCU_membership[D_MAX_BLOCKS_IN_MCU];
- /* MCU_membership[i] is index in cur_comp_info of component owning */
- /* i'th block in an MCU */
-
- int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */
-
- /* This field is shared between entropy decoder and marker parser.
- * It is either zero or the code of a JPEG marker that has been
- * read from the data source, but has not yet been processed.
- */
- int unread_marker;
-
- /*
- * Links to decompression subobjects (methods, private variables of modules)
- */
- struct jpeg_decomp_master * master;
- struct jpeg_d_main_controller * main;
- struct jpeg_d_coef_controller * coef;
- struct jpeg_d_post_controller * post;
- struct jpeg_input_controller * inputctl;
- struct jpeg_marker_reader * marker;
- struct jpeg_entropy_decoder * entropy;
- struct jpeg_inverse_dct * idct;
- struct jpeg_upsampler * upsample;
- struct jpeg_color_deconverter * cconvert;
- struct jpeg_color_quantizer * cquantize;
-};
-
-typedef struct {
-
- // |--- byte_offset ---|- bit_left -|
- // \------ 27 -------/ \---- 5 ----/
- unsigned int bitstream_offset;
- short prev_dc[3];
-
- // remaining EOBs in EOBRUN
- unsigned short EOBRUN;
-
- // save the decoder current bit buffer, entropy->bitstate.get_buffer.
- INT32 get_buffer;
-
- // save the restart info.
- unsigned short restarts_to_go;
- unsigned char next_restart_num;
-} huffman_offset_data;
-
-typedef struct {
-
- // The header starting position of this scan
- unsigned int bitstream_offset;
-
- // Number of components in this scan
- int comps_in_scan;
-
- // Number of MCUs in each row
- int MCUs_per_row;
- int MCU_rows_per_iMCU_row;
-
- // The last MCU position and its dc value in this scan
- huffman_offset_data prev_MCU_offset;
-
- huffman_offset_data **offset;
-} huffman_scan_header;
-
-#define DEFAULT_MCU_SAMPLE_SIZE 16
-
-typedef struct {
-
- // The number of MCUs that we sample each time as an index point
- int MCU_sample_size;
-
- // Number of scan in this image
- int scan_count;
-
- // Number of iMCUs rows in this image
- int total_iMCU_rows;
-
- // Memory used by scan struct
- size_t mem_used;
- huffman_scan_header *scan;
-} huffman_index;
-
-/* "Object" declarations for JPEG modules that may be supplied or called
- * directly by the surrounding application.
- * As with all objects in the JPEG library, these structs only define the
- * publicly visible methods and state variables of a module. Additional
- * private fields may exist after the public ones.
- */
-
-
-/* Error handler object */
-
-struct jpeg_error_mgr {
- /* Error exit handler: does not return to caller */
- JMETHOD(void, error_exit, (j_common_ptr cinfo));
- /* Conditionally emit a trace or warning message */
- JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level));
- /* Routine that actually outputs a trace or error message */
- JMETHOD(void, output_message, (j_common_ptr cinfo));
- /* Format a message string for the most recent JPEG error or message */
- JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer));
-#define JMSG_LENGTH_MAX 200 /* recommended size of format_message buffer */
- /* Reset error state variables at start of a new image */
- JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo));
-
- /* The message ID code and any parameters are saved here.
- * A message can have one string parameter or up to 8 int parameters.
- */
- int msg_code;
-#define JMSG_STR_PARM_MAX 80
- union {
- int i[8];
- char s[JMSG_STR_PARM_MAX];
- } msg_parm;
-
- /* Standard state variables for error facility */
-
- int trace_level; /* max msg_level that will be displayed */
-
- /* For recoverable corrupt-data errors, we emit a warning message,
- * but keep going unless emit_message chooses to abort. emit_message
- * should count warnings in num_warnings. The surrounding application
- * can check for bad data by seeing if num_warnings is nonzero at the
- * end of processing.
- */
- long num_warnings; /* number of corrupt-data warnings */
-
- /* These fields point to the table(s) of error message strings.
- * An application can change the table pointer to switch to a different
- * message list (typically, to change the language in which errors are
- * reported). Some applications may wish to add additional error codes
- * that will be handled by the JPEG library error mechanism; the second
- * table pointer is used for this purpose.
- *
- * First table includes all errors generated by JPEG library itself.
- * Error code 0 is reserved for a "no such error string" message.
- */
- const char * const * jpeg_message_table; /* Library errors */
- int last_jpeg_message; /* Table contains strings 0..last_jpeg_message */
- /* Second table can be added by application (see cjpeg/djpeg for example).
- * It contains strings numbered first_addon_message..last_addon_message.
- */
- const char * const * addon_message_table; /* Non-library errors */
- int first_addon_message; /* code for first string in addon table */
- int last_addon_message; /* code for last string in addon table */
-};
-
-
-/* Progress monitor object */
-
-struct jpeg_progress_mgr {
- JMETHOD(void, progress_monitor, (j_common_ptr cinfo));
-
- long pass_counter; /* work units completed in this pass */
- long pass_limit; /* total number of work units in this pass */
- int completed_passes; /* passes completed so far */
- int total_passes; /* total number of passes expected */
-};
-
-
-/* Data destination object for compression */
-
-struct jpeg_destination_mgr {
- JOCTET * next_output_byte; /* => next byte to write in buffer */
- size_t free_in_buffer; /* # of byte spaces remaining in buffer */
-
- JMETHOD(void, init_destination, (j_compress_ptr cinfo));
- JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo));
- JMETHOD(void, term_destination, (j_compress_ptr cinfo));
-};
-
-
-/* Data source object for decompression */
-
-struct jpeg_source_mgr {
- const JOCTET * next_input_byte; /* => next byte to read from buffer */
- const JOCTET * start_input_byte; /* => first byte to read from input */
- size_t bytes_in_buffer; /* # of bytes remaining in buffer */
- size_t current_offset; /* current readed input offset */
-
- JMETHOD(void, init_source, (j_decompress_ptr cinfo));
- JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo));
- JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes));
- JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired));
- JMETHOD(void, term_source, (j_decompress_ptr cinfo));
- JMETHOD(boolean, seek_input_data, (j_decompress_ptr cinfo, long byte_offset));
-};
-
-
-/* Memory manager object.
- * Allocates "small" objects (a few K total), "large" objects (tens of K),
- * and "really big" objects (virtual arrays with backing store if needed).
- * The memory manager does not allow individual objects to be freed; rather,
- * each created object is assigned to a pool, and whole pools can be freed
- * at once. This is faster and more convenient than remembering exactly what
- * to free, especially where malloc()/free() are not too speedy.
- * NB: alloc routines never return NULL. They exit to error_exit if not
- * successful.
- */
-
-#define JPOOL_PERMANENT 0 /* lasts until master record is destroyed */
-#define JPOOL_IMAGE 1 /* lasts until done with image/datastream */
-#define JPOOL_NUMPOOLS 2
-
-typedef struct jvirt_sarray_control * jvirt_sarray_ptr;
-typedef struct jvirt_barray_control * jvirt_barray_ptr;
-
-
-struct jpeg_memory_mgr {
- /* Method pointers */
- JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id,
- size_t sizeofobject));
- JMETHOD(void FAR *, alloc_large, (j_common_ptr cinfo, int pool_id,
- size_t sizeofobject));
- JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id,
- JDIMENSION samplesperrow,
- JDIMENSION numrows));
- JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id,
- JDIMENSION blocksperrow,
- JDIMENSION numrows));
- JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo,
- int pool_id,
- boolean pre_zero,
- JDIMENSION samplesperrow,
- JDIMENSION numrows,
- JDIMENSION maxaccess));
- JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo,
- int pool_id,
- boolean pre_zero,
- JDIMENSION blocksperrow,
- JDIMENSION numrows,
- JDIMENSION maxaccess));
- JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo));
- JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo,
- jvirt_sarray_ptr ptr,
- JDIMENSION start_row,
- JDIMENSION num_rows,
- boolean writable));
- JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo,
- jvirt_barray_ptr ptr,
- JDIMENSION start_row,
- JDIMENSION num_rows,
- boolean writable));
- JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id));
- JMETHOD(void, self_destruct, (j_common_ptr cinfo));
-
- /* Limit on memory allocation for this JPEG object. (Note that this is
- * merely advisory, not a guaranteed maximum; it only affects the space
- * used for virtual-array buffers.) May be changed by outer application
- * after creating the JPEG object.
- */
- long max_memory_to_use;
-
- /* Maximum allocation request accepted by alloc_large. */
- long max_alloc_chunk;
-};
-
-
-/* Routine signature for application-supplied marker processing methods.
- * Need not pass marker code since it is stored in cinfo->unread_marker.
- */
-typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo));
-
-
-/* Declarations for routines called by application.
- * The JPP macro hides prototype parameters from compilers that can't cope.
- * Note JPP requires double parentheses.
- */
-
-#ifdef HAVE_PROTOTYPES
-#define JPP(arglist) arglist
-#else
-#define JPP(arglist) ()
-#endif
-
-
-/* Short forms of external names for systems with brain-damaged linkers.
- * We shorten external names to be unique in the first six letters, which
- * is good enough for all known systems.
- * (If your compiler itself needs names to be unique in less than 15
- * characters, you are out of luck. Get a better compiler.)
- */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jpeg_std_error jStdError
-#define jpeg_CreateCompress jCreaCompress
-#define jpeg_CreateDecompress jCreaDecompress
-#define jpeg_destroy_compress jDestCompress
-#define jpeg_destroy_decompress jDestDecompress
-#define jpeg_stdio_dest jStdDest
-#define jpeg_stdio_src jStdSrc
-#define jpeg_set_defaults jSetDefaults
-#define jpeg_set_colorspace jSetColorspace
-#define jpeg_default_colorspace jDefColorspace
-#define jpeg_set_quality jSetQuality
-#define jpeg_set_linear_quality jSetLQuality
-#define jpeg_add_quant_table jAddQuantTable
-#define jpeg_quality_scaling jQualityScaling
-#define jpeg_simple_progression jSimProgress
-#define jpeg_suppress_tables jSuppressTables
-#define jpeg_alloc_quant_table jAlcQTable
-#define jpeg_alloc_huff_table jAlcHTable
-#define jpeg_start_compress jStrtCompress
-#define jpeg_write_scanlines jWrtScanlines
-#define jpeg_finish_compress jFinCompress
-#define jpeg_write_raw_data jWrtRawData
-#define jpeg_write_marker jWrtMarker
-#define jpeg_write_m_header jWrtMHeader
-#define jpeg_write_m_byte jWrtMByte
-#define jpeg_write_tables jWrtTables
-#define jpeg_read_header jReadHeader
-#define jpeg_start_decompress jStrtDecompress
-#define jpeg_read_scanlines jReadScanlines
-#define jpeg_finish_decompress jFinDecompress
-#define jpeg_read_raw_data jReadRawData
-#define jpeg_has_multiple_scans jHasMultScn
-#define jpeg_start_output jStrtOutput
-#define jpeg_finish_output jFinOutput
-#define jpeg_input_complete jInComplete
-#define jpeg_new_colormap jNewCMap
-#define jpeg_consume_input jConsumeInput
-#define jpeg_calc_output_dimensions jCalcDimensions
-#define jpeg_save_markers jSaveMarkers
-#define jpeg_set_marker_processor jSetMarker
-#define jpeg_read_coefficients jReadCoefs
-#define jpeg_write_coefficients jWrtCoefs
-#define jpeg_copy_critical_parameters jCopyCrit
-#define jpeg_abort_compress jAbrtCompress
-#define jpeg_abort_decompress jAbrtDecompress
-#define jpeg_abort jAbort
-#define jpeg_destroy jDestroy
-#define jpeg_resync_to_restart jResyncRestart
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-
-/* Default error-management setup */
-EXTERN(struct jpeg_error_mgr *) jpeg_std_error
- JPP((struct jpeg_error_mgr * err));
-
-/* Initialization of JPEG compression objects.
- * jpeg_create_compress() and jpeg_create_decompress() are the exported
- * names that applications should call. These expand to calls on
- * jpeg_CreateCompress and jpeg_CreateDecompress with additional information
- * passed for version mismatch checking.
- * NB: you must set up the error-manager BEFORE calling jpeg_create_xxx.
- */
-#define jpeg_create_compress(cinfo) \
- jpeg_CreateCompress((cinfo), JPEG_LIB_VERSION, \
- (size_t) sizeof(struct jpeg_compress_struct))
-#define jpeg_create_decompress(cinfo) \
- jpeg_CreateDecompress((cinfo), JPEG_LIB_VERSION, \
- (size_t) sizeof(struct jpeg_decompress_struct))
-EXTERN(void) jpeg_CreateCompress JPP((j_compress_ptr cinfo,
- int version, size_t structsize));
-EXTERN(void) jpeg_CreateDecompress JPP((j_decompress_ptr cinfo,
- int version, size_t structsize));
-/* Destruction of JPEG compression objects */
-EXTERN(void) jpeg_destroy_compress JPP((j_compress_ptr cinfo));
-EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo));
-
-/* Standard data source and destination managers: stdio streams. */
-/* Caller is responsible for opening the file before and closing after. */
-EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile));
-EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FILE * infile));
-
-/* Default parameter setup for compression */
-EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo));
-/* Compression parameter setup aids */
-EXTERN(void) jpeg_set_colorspace JPP((j_compress_ptr cinfo,
- J_COLOR_SPACE colorspace));
-EXTERN(void) jpeg_default_colorspace JPP((j_compress_ptr cinfo));
-EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality,
- boolean force_baseline));
-EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo,
- int scale_factor,
- boolean force_baseline));
-EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl,
- const unsigned int *basic_table,
- int scale_factor,
- boolean force_baseline));
-EXTERN(int) jpeg_quality_scaling JPP((int quality));
-EXTERN(void) jpeg_simple_progression JPP((j_compress_ptr cinfo));
-EXTERN(void) jpeg_suppress_tables JPP((j_compress_ptr cinfo,
- boolean suppress));
-EXTERN(JQUANT_TBL *) jpeg_alloc_quant_table JPP((j_common_ptr cinfo));
-EXTERN(JHUFF_TBL *) jpeg_alloc_huff_table JPP((j_common_ptr cinfo));
-
-/* Main entry points for compression */
-EXTERN(void) jpeg_start_compress JPP((j_compress_ptr cinfo,
- boolean write_all_tables));
-EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo,
- JSAMPARRAY scanlines,
- JDIMENSION num_lines));
-EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo));
-
-/* Replaces jpeg_write_scanlines when writing raw downsampled data. */
-EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo,
- JSAMPIMAGE data,
- JDIMENSION num_lines));
-
-/* Write a special marker. See libjpeg.doc concerning safe usage. */
-EXTERN(void) jpeg_write_marker
- JPP((j_compress_ptr cinfo, int marker,
- const JOCTET * dataptr, unsigned int datalen));
-/* Same, but piecemeal. */
-EXTERN(void) jpeg_write_m_header
- JPP((j_compress_ptr cinfo, int marker, unsigned int datalen));
-EXTERN(void) jpeg_write_m_byte
- JPP((j_compress_ptr cinfo, int val));
-
-/* Alternate compression function: just write an abbreviated table file */
-EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo));
-
-/* Decompression startup: read start of JPEG datastream to see what's there */
-EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo,
- boolean require_image));
-/* Return value is one of: */
-#define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */
-#define JPEG_HEADER_OK 1 /* Found valid image datastream */
-#define JPEG_HEADER_TABLES_ONLY 2 /* Found valid table-specs-only datastream */
-/* If you pass require_image = TRUE (normal case), you need not check for
- * a TABLES_ONLY return code; an abbreviated file will cause an error exit.
- * JPEG_SUSPENDED is only possible if you use a data source module that can
- * give a suspension return (the stdio source module doesn't).
- */
-
-/* Main entry points for decompression */
-EXTERN(boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo));
-EXTERN(boolean) jpeg_start_tile_decompress JPP((j_decompress_ptr cinfo));
-EXTERN(JDIMENSION) jpeg_read_scanlines JPP((j_decompress_ptr cinfo,
- JSAMPARRAY scanlines,
- JDIMENSION max_lines));
-EXTERN(JDIMENSION) jpeg_read_scanlines_from JPP((j_decompress_ptr cinfo,
- JSAMPARRAY scanlines,
- int line_offset,
- JDIMENSION max_lines));
-EXTERN(JDIMENSION) jpeg_read_tile_scanline JPP((j_decompress_ptr cinfo,
- huffman_index *index,
- JSAMPARRAY scanlines));
-EXTERN(void) jpeg_init_read_tile_scanline JPP((j_decompress_ptr cinfo,
- huffman_index *index,
- int *start_x, int *start_y,
- int *width, int *height));
-EXTERN(boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo));
-
-/* Replaces jpeg_read_scanlines when reading raw downsampled data. */
-EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo,
- JSAMPIMAGE data,
- JDIMENSION max_lines));
-
-/* Additional entry points for buffered-image mode. */
-EXTERN(boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo));
-EXTERN(boolean) jpeg_start_output JPP((j_decompress_ptr cinfo,
- int scan_number));
-EXTERN(boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo));
-EXTERN(boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo));
-EXTERN(void) jpeg_new_colormap JPP((j_decompress_ptr cinfo));
-EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo));
-/* Return value is one of: */
-/* #define JPEG_SUSPENDED 0 Suspended due to lack of input data */
-#define JPEG_REACHED_SOS 1 /* Reached start of new scan */
-#define JPEG_REACHED_EOI 2 /* Reached end of image */
-#define JPEG_ROW_COMPLETED 3 /* Completed one iMCU row */
-#define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */
-
-/* Precalculate output dimensions for current decompression parameters. */
-EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo));
-
-/* Control saving of COM and APPn markers into marker_list. */
-EXTERN(void) jpeg_save_markers
- JPP((j_decompress_ptr cinfo, int marker_code,
- unsigned int length_limit));
-
-/* Install a special processing method for COM or APPn markers. */
-EXTERN(void) jpeg_set_marker_processor
- JPP((j_decompress_ptr cinfo, int marker_code,
- jpeg_marker_parser_method routine));
-
-/* Read or write raw DCT coefficients --- useful for lossless transcoding. */
-EXTERN(jvirt_barray_ptr *) jpeg_read_coefficients JPP((j_decompress_ptr cinfo));
-EXTERN(boolean) jpeg_build_huffman_index
- JPP((j_decompress_ptr cinfo, huffman_index *index));
-EXTERN(void) jpeg_write_coefficients JPP((j_compress_ptr cinfo,
- jvirt_barray_ptr * coef_arrays));
-EXTERN(void) jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo,
- j_compress_ptr dstinfo));
-
-/* If you choose to abort compression or decompression before completing
- * jpeg_finish_(de)compress, then you need to clean up to release memory,
- * temporary files, etc. You can just call jpeg_destroy_(de)compress
- * if you're done with the JPEG object, but if you want to clean it up and
- * reuse it, call this:
- */
-EXTERN(void) jpeg_abort_compress JPP((j_compress_ptr cinfo));
-EXTERN(void) jpeg_abort_decompress JPP((j_decompress_ptr cinfo));
-
-/* Generic versions of jpeg_abort and jpeg_destroy that work on either
- * flavor of JPEG object. These may be more convenient in some places.
- */
-EXTERN(void) jpeg_abort JPP((j_common_ptr cinfo));
-EXTERN(void) jpeg_destroy JPP((j_common_ptr cinfo));
-
-/* Default restart-marker-resync procedure for use by data source modules */
-EXTERN(boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo,
- int desired));
-
-EXTERN(void) jpeg_configure_huffman_decoder(j_decompress_ptr cinfo,
- huffman_offset_data offset);
-EXTERN(void) jpeg_get_huffman_decoder_configuration(j_decompress_ptr cinfo,
- huffman_offset_data *offset);
-EXTERN(void) jpeg_create_huffman_index(j_decompress_ptr cinfo,
- huffman_index *index);
-EXTERN(void) jpeg_configure_huffman_index_scan(j_decompress_ptr cinfo,
- huffman_index *index, int scan_no, int offset);
-EXTERN(void) jpeg_destroy_huffman_index(huffman_index *index);
-
-
-/* These marker codes are exported since applications and data source modules
- * are likely to want to use them.
- */
-
-#define JPEG_RST0 0xD0 /* RST0 marker code */
-#define JPEG_EOI 0xD9 /* EOI marker code */
-#define JPEG_APP0 0xE0 /* APP0 marker code */
-#define JPEG_COM 0xFE /* COM marker code */
-
-
-/* If we have a brain-damaged compiler that emits warnings (or worse, errors)
- * for structure definitions that are never filled in, keep it quiet by
- * supplying dummy definitions for the various substructures.
- */
-
-#ifdef INCOMPLETE_TYPES_BROKEN
-#ifndef JPEG_INTERNALS /* will be defined in jpegint.h */
-struct jvirt_sarray_control { long dummy; };
-struct jvirt_barray_control { long dummy; };
-struct jpeg_comp_master { long dummy; };
-struct jpeg_c_main_controller { long dummy; };
-struct jpeg_c_prep_controller { long dummy; };
-struct jpeg_c_coef_controller { long dummy; };
-struct jpeg_marker_writer { long dummy; };
-struct jpeg_color_converter { long dummy; };
-struct jpeg_downsampler { long dummy; };
-struct jpeg_forward_dct { long dummy; };
-struct jpeg_entropy_encoder { long dummy; };
-struct jpeg_decomp_master { long dummy; };
-struct jpeg_d_main_controller { long dummy; };
-struct jpeg_d_coef_controller { long dummy; };
-struct jpeg_d_post_controller { long dummy; };
-struct jpeg_input_controller { long dummy; };
-struct jpeg_marker_reader { long dummy; };
-struct jpeg_entropy_decoder { long dummy; };
-struct jpeg_inverse_dct { long dummy; };
-struct jpeg_upsampler { long dummy; };
-struct jpeg_color_deconverter { long dummy; };
-struct jpeg_color_quantizer { long dummy; };
-#endif /* JPEG_INTERNALS */
-#endif /* INCOMPLETE_TYPES_BROKEN */
-
-
-/*
- * The JPEG library modules define JPEG_INTERNALS before including this file.
- * The internal structure declarations are read only when that is true.
- * Applications using the library should not include jpegint.h, but may wish
- * to include jerror.h.
- */
-
-#ifdef JPEG_INTERNALS
-#include "jpegint.h" /* fetch private declarations */
-#include "jerror.h" /* fetch error codes too */
-#endif
-
-#endif /* JPEGLIB_H */
diff --git a/libjpegtwrp/jpegtran.1 b/libjpegtwrp/jpegtran.1
deleted file mode 100644
index 6de18e2af..000000000
--- a/libjpegtwrp/jpegtran.1
+++ /dev/null
@@ -1,238 +0,0 @@
-.TH JPEGTRAN 1 "3 August 1997"
-.SH NAME
-jpegtran \- lossless transformation of JPEG files
-.SH SYNOPSIS
-.B jpegtran
-[
-.I options
-]
-[
-.I filename
-]
-.LP
-.SH DESCRIPTION
-.LP
-.B jpegtran
-performs various useful transformations of JPEG files.
-It can translate the coded representation from one variant of JPEG to another,
-for example from baseline JPEG to progressive JPEG or vice versa. It can also
-perform some rearrangements of the image data, for example turning an image
-from landscape to portrait format by rotation.
-.PP
-.B jpegtran
-works by rearranging the compressed data (DCT coefficients), without
-ever fully decoding the image. Therefore, its transformations are lossless:
-there is no image degradation at all, which would not be true if you used
-.B djpeg
-followed by
-.B cjpeg
-to accomplish the same conversion. But by the same token,
-.B jpegtran
-cannot perform lossy operations such as changing the image quality.
-.PP
-.B jpegtran
-reads the named JPEG/JFIF file, or the standard input if no file is
-named, and produces a JPEG/JFIF file on the standard output.
-.SH OPTIONS
-All switch names may be abbreviated; for example,
-.B \-optimize
-may be written
-.B \-opt
-or
-.BR \-o .
-Upper and lower case are equivalent.
-British spellings are also accepted (e.g.,
-.BR \-optimise ),
-though for brevity these are not mentioned below.
-.PP
-To specify the coded JPEG representation used in the output file,
-.B jpegtran
-accepts a subset of the switches recognized by
-.BR cjpeg :
-.TP
-.B \-optimize
-Perform optimization of entropy encoding parameters.
-.TP
-.B \-progressive
-Create progressive JPEG file.
-.TP
-.BI \-restart " N"
-Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is
-attached to the number.
-.TP
-.BI \-scans " file"
-Use the scan script given in the specified text file.
-.PP
-See
-.BR cjpeg (1)
-for more details about these switches.
-If you specify none of these switches, you get a plain baseline-JPEG output
-file. The quality setting and so forth are determined by the input file.
-.PP
-The image can be losslessly transformed by giving one of these switches:
-.TP
-.B \-flip horizontal
-Mirror image horizontally (left-right).
-.TP
-.B \-flip vertical
-Mirror image vertically (top-bottom).
-.TP
-.B \-rotate 90
-Rotate image 90 degrees clockwise.
-.TP
-.B \-rotate 180
-Rotate image 180 degrees.
-.TP
-.B \-rotate 270
-Rotate image 270 degrees clockwise (or 90 ccw).
-.TP
-.B \-transpose
-Transpose image (across UL-to-LR axis).
-.TP
-.B \-transverse
-Transverse transpose (across UR-to-LL axis).
-.PP
-The transpose transformation has no restrictions regarding image dimensions.
-The other transformations operate rather oddly if the image dimensions are not
-a multiple of the iMCU size (usually 8 or 16 pixels), because they can only
-transform complete blocks of DCT coefficient data in the desired way.
-.PP
-.BR jpegtran 's
-default behavior when transforming an odd-size image is designed
-to preserve exact reversibility and mathematical consistency of the
-transformation set. As stated, transpose is able to flip the entire image
-area. Horizontal mirroring leaves any partial iMCU column at the right edge
-untouched, but is able to flip all rows of the image. Similarly, vertical
-mirroring leaves any partial iMCU row at the bottom edge untouched, but is
-able to flip all columns. The other transforms can be built up as sequences
-of transpose and flip operations; for consistency, their actions on edge
-pixels are defined to be the same as the end result of the corresponding
-transpose-and-flip sequence.
-.PP
-For practical use, you may prefer to discard any untransformable edge pixels
-rather than having a strange-looking strip along the right and/or bottom edges
-of a transformed image. To do this, add the
-.B \-trim
-switch:
-.TP
-.B \-trim
-Drop non-transformable edge blocks.
-.PP
-Obviously, a transformation with
-.B \-trim
-is not reversible, so strictly speaking
-.B jpegtran
-with this switch is not lossless. Also, the expected mathematical
-equivalences between the transformations no longer hold. For example,
-.B \-rot 270 -trim
-trims only the bottom edge, but
-.B \-rot 90 -trim
-followed by
-.B \-rot 180 -trim
-trims both edges.
-.PP
-Another not-strictly-lossless transformation switch is:
-.TP
-.B \-grayscale
-Force grayscale output.
-.PP
-This option discards the chrominance channels if the input image is YCbCr
-(ie, a standard color JPEG), resulting in a grayscale JPEG file. The
-luminance channel is preserved exactly, so this is a better method of reducing
-to grayscale than decompression, conversion, and recompression. This switch
-is particularly handy for fixing a monochrome picture that was mistakenly
-encoded as a color JPEG. (In such a case, the space savings from getting rid
-of the near-empty chroma channels won't be large; but the decoding time for
-a grayscale JPEG is substantially less than that for a color JPEG.)
-.PP
-.B jpegtran
-also recognizes these switches that control what to do with "extra" markers,
-such as comment blocks:
-.TP
-.B \-copy none
-Copy no extra markers from source file. This setting suppresses all
-comments and other excess baggage present in the source file.
-.TP
-.B \-copy comments
-Copy only comment markers. This setting copies comments from the source file,
-but discards any other inessential data.
-.TP
-.B \-copy all
-Copy all extra markers. This setting preserves miscellaneous markers
-found in the source file, such as JFIF thumbnails and Photoshop settings.
-In some files these extra markers can be sizable.
-.PP
-The default behavior is
-.BR "\-copy comments" .
-(Note: in IJG releases v6 and v6a,
-.B jpegtran
-always did the equivalent of
-.BR "\-copy none" .)
-.PP
-Additional switches recognized by jpegtran are:
-.TP
-.BI \-maxmemory " N"
-Set limit for amount of memory to use in processing large images. Value is
-in thousands of bytes, or millions of bytes if "M" is attached to the
-number. For example,
-.B \-max 4m
-selects 4000000 bytes. If more space is needed, temporary files will be used.
-.TP
-.BI \-outfile " name"
-Send output image to the named file, not to standard output.
-.TP
-.B \-verbose
-Enable debug printout. More
-.BR \-v 's
-give more output. Also, version information is printed at startup.
-.TP
-.B \-debug
-Same as
-.BR \-verbose .
-.SH EXAMPLES
-.LP
-This example converts a baseline JPEG file to progressive form:
-.IP
-.B jpegtran \-progressive
-.I foo.jpg
-.B >
-.I fooprog.jpg
-.PP
-This example rotates an image 90 degrees clockwise, discarding any
-unrotatable edge pixels:
-.IP
-.B jpegtran \-rot 90 -trim
-.I foo.jpg
-.B >
-.I foo90.jpg
-.SH ENVIRONMENT
-.TP
-.B JPEGMEM
-If this environment variable is set, its value is the default memory limit.
-The value is specified as described for the
-.B \-maxmemory
-switch.
-.B JPEGMEM
-overrides the default value specified when the program was compiled, and
-itself is overridden by an explicit
-.BR \-maxmemory .
-.SH SEE ALSO
-.BR cjpeg (1),
-.BR djpeg (1),
-.BR rdjpgcom (1),
-.BR wrjpgcom (1)
-.br
-Wallace, Gregory K. "The JPEG Still Picture Compression Standard",
-Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
-.SH AUTHOR
-Independent JPEG Group
-.SH BUGS
-Arithmetic coding is not supported for legal reasons.
-.PP
-The transform options can't transform odd-size images perfectly. Use
-.B \-trim
-if you don't like the results without it.
-.PP
-The entire image is read into memory and then written out again, even in
-cases where this isn't really necessary. Expect swapping on large images,
-especially when using the more complex transform options.
diff --git a/libjpegtwrp/jpegtran.c b/libjpegtwrp/jpegtran.c
deleted file mode 100644
index 20ef111b3..000000000
--- a/libjpegtwrp/jpegtran.c
+++ /dev/null
@@ -1,504 +0,0 @@
-/*
- * jpegtran.c
- *
- * Copyright (C) 1995-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a command-line user interface for JPEG transcoding.
- * It is very similar to cjpeg.c, but provides lossless transcoding between
- * different JPEG file formats. It also provides some lossless and sort-of-
- * lossless transformations of JPEG data.
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-#include "transupp.h" /* Support routines for jpegtran */
-#include "jversion.h" /* for version message */
-
-#ifdef USE_CCOMMAND /* command-line reader for Macintosh */
-#ifdef __MWERKS__
-#include <SIOUX.h> /* Metrowerks needs this */
-#include <console.h> /* ... and this */
-#endif
-#ifdef THINK_C
-#include <console.h> /* Think declares it here */
-#endif
-#endif
-
-
-/*
- * Argument-parsing code.
- * The switch parser is designed to be useful with DOS-style command line
- * syntax, ie, intermixed switches and file names, where only the switches
- * to the left of a given file name affect processing of that file.
- * The main program in this file doesn't actually use this capability...
- */
-
-
-static const char * progname; /* program name for error messages */
-static char * outfilename; /* for -outfile switch */
-static JCOPY_OPTION copyoption; /* -copy switch */
-static jpeg_transform_info transformoption; /* image transformation options */
-
-
-LOCAL(void)
-usage (void)
-/* complain about bad command line */
-{
- fprintf(stderr, "usage: %s [switches] ", progname);
-#ifdef TWO_FILE_COMMANDLINE
- fprintf(stderr, "inputfile outputfile\n");
-#else
- fprintf(stderr, "[inputfile]\n");
-#endif
-
- fprintf(stderr, "Switches (names may be abbreviated):\n");
- fprintf(stderr, " -copy none Copy no extra markers from source file\n");
- fprintf(stderr, " -copy comments Copy only comment markers (default)\n");
- fprintf(stderr, " -copy all Copy all extra markers\n");
-#ifdef ENTROPY_OPT_SUPPORTED
- fprintf(stderr, " -optimize Optimize Huffman table (smaller file, but slow compression)\n");
-#endif
-#ifdef C_PROGRESSIVE_SUPPORTED
- fprintf(stderr, " -progressive Create progressive JPEG file\n");
-#endif
-#if TRANSFORMS_SUPPORTED
- fprintf(stderr, "Switches for modifying the image:\n");
- fprintf(stderr, " -grayscale Reduce to grayscale (omit color data)\n");
- fprintf(stderr, " -flip [horizontal|vertical] Mirror image (left-right or top-bottom)\n");
- fprintf(stderr, " -rotate [90|180|270] Rotate image (degrees clockwise)\n");
- fprintf(stderr, " -transpose Transpose image\n");
- fprintf(stderr, " -transverse Transverse transpose image\n");
- fprintf(stderr, " -trim Drop non-transformable edge blocks\n");
-#endif /* TRANSFORMS_SUPPORTED */
- fprintf(stderr, "Switches for advanced users:\n");
- fprintf(stderr, " -restart N Set restart interval in rows, or in blocks with B\n");
- fprintf(stderr, " -maxmemory N Maximum memory to use (in kbytes)\n");
- fprintf(stderr, " -outfile name Specify name for output file\n");
- fprintf(stderr, " -verbose or -debug Emit debug output\n");
- fprintf(stderr, "Switches for wizards:\n");
-#ifdef C_ARITH_CODING_SUPPORTED
- fprintf(stderr, " -arithmetic Use arithmetic coding\n");
-#endif
-#ifdef C_MULTISCAN_FILES_SUPPORTED
- fprintf(stderr, " -scans file Create multi-scan JPEG per script file\n");
-#endif
- exit(EXIT_FAILURE);
-}
-
-
-LOCAL(void)
-select_transform (JXFORM_CODE transform)
-/* Silly little routine to detect multiple transform options,
- * which we can't handle.
- */
-{
-#if TRANSFORMS_SUPPORTED
- if (transformoption.transform == JXFORM_NONE ||
- transformoption.transform == transform) {
- transformoption.transform = transform;
- } else {
- fprintf(stderr, "%s: can only do one image transformation at a time\n",
- progname);
- usage();
- }
-#else
- fprintf(stderr, "%s: sorry, image transformation was not compiled\n",
- progname);
- exit(EXIT_FAILURE);
-#endif
-}
-
-
-LOCAL(int)
-parse_switches (j_compress_ptr cinfo, int argc, char **argv,
- int last_file_arg_seen, boolean for_real)
-/* Parse optional switches.
- * Returns argv[] index of first file-name argument (== argc if none).
- * Any file names with indexes <= last_file_arg_seen are ignored;
- * they have presumably been processed in a previous iteration.
- * (Pass 0 for last_file_arg_seen on the first or only iteration.)
- * for_real is FALSE on the first (dummy) pass; we may skip any expensive
- * processing.
- */
-{
- int argn;
- char * arg;
- boolean simple_progressive;
- char * scansarg = NULL; /* saves -scans parm if any */
-
- /* Set up default JPEG parameters. */
- simple_progressive = FALSE;
- outfilename = NULL;
- copyoption = JCOPYOPT_DEFAULT;
- transformoption.transform = JXFORM_NONE;
- transformoption.trim = FALSE;
- transformoption.force_grayscale = FALSE;
- cinfo->err->trace_level = 0;
-
- /* Scan command line options, adjust parameters */
-
- for (argn = 1; argn < argc; argn++) {
- arg = argv[argn];
- if (*arg != '-') {
- /* Not a switch, must be a file name argument */
- if (argn <= last_file_arg_seen) {
- outfilename = NULL; /* -outfile applies to just one input file */
- continue; /* ignore this name if previously processed */
- }
- break; /* else done parsing switches */
- }
- arg++; /* advance past switch marker character */
-
- if (keymatch(arg, "arithmetic", 1)) {
- /* Use arithmetic coding. */
-#ifdef C_ARITH_CODING_SUPPORTED
- cinfo->arith_code = TRUE;
-#else
- fprintf(stderr, "%s: sorry, arithmetic coding not supported\n",
- progname);
- exit(EXIT_FAILURE);
-#endif
-
- } else if (keymatch(arg, "copy", 1)) {
- /* Select which extra markers to copy. */
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (keymatch(argv[argn], "none", 1)) {
- copyoption = JCOPYOPT_NONE;
- } else if (keymatch(argv[argn], "comments", 1)) {
- copyoption = JCOPYOPT_COMMENTS;
- } else if (keymatch(argv[argn], "all", 1)) {
- copyoption = JCOPYOPT_ALL;
- } else
- usage();
-
- } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
- /* Enable debug printouts. */
- /* On first -d, print version identification */
- static boolean printed_version = FALSE;
-
- if (! printed_version) {
- fprintf(stderr, "Independent JPEG Group's JPEGTRAN, version %s\n%s\n",
- JVERSION, JCOPYRIGHT);
- printed_version = TRUE;
- }
- cinfo->err->trace_level++;
-
- } else if (keymatch(arg, "flip", 1)) {
- /* Mirror left-right or top-bottom. */
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (keymatch(argv[argn], "horizontal", 1))
- select_transform(JXFORM_FLIP_H);
- else if (keymatch(argv[argn], "vertical", 1))
- select_transform(JXFORM_FLIP_V);
- else
- usage();
-
- } else if (keymatch(arg, "grayscale", 1) || keymatch(arg, "greyscale",1)) {
- /* Force to grayscale. */
-#if TRANSFORMS_SUPPORTED
- transformoption.force_grayscale = TRUE;
-#else
- select_transform(JXFORM_NONE); /* force an error */
-#endif
-
- } else if (keymatch(arg, "maxmemory", 3)) {
- /* Maximum memory in Kb (or Mb with 'm'). */
- long lval;
- char ch = 'x';
-
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
- usage();
- if (ch == 'm' || ch == 'M')
- lval *= 1000L;
- cinfo->mem->max_memory_to_use = lval * 1000L;
-
- } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
- /* Enable entropy parm optimization. */
-#ifdef ENTROPY_OPT_SUPPORTED
- cinfo->optimize_coding = TRUE;
-#else
- fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n",
- progname);
- exit(EXIT_FAILURE);
-#endif
-
- } else if (keymatch(arg, "outfile", 4)) {
- /* Set output file name. */
- if (++argn >= argc) /* advance to next argument */
- usage();
- outfilename = argv[argn]; /* save it away for later use */
-
- } else if (keymatch(arg, "progressive", 1)) {
- /* Select simple progressive mode. */
-#ifdef C_PROGRESSIVE_SUPPORTED
- simple_progressive = TRUE;
- /* We must postpone execution until num_components is known. */
-#else
- fprintf(stderr, "%s: sorry, progressive output was not compiled\n",
- progname);
- exit(EXIT_FAILURE);
-#endif
-
- } else if (keymatch(arg, "restart", 1)) {
- /* Restart interval in MCU rows (or in MCUs with 'b'). */
- long lval;
- char ch = 'x';
-
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
- usage();
- if (lval < 0 || lval > 65535L)
- usage();
- if (ch == 'b' || ch == 'B') {
- cinfo->restart_interval = (unsigned int) lval;
- cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */
- } else {
- cinfo->restart_in_rows = (int) lval;
- /* restart_interval will be computed during startup */
- }
-
- } else if (keymatch(arg, "rotate", 2)) {
- /* Rotate 90, 180, or 270 degrees (measured clockwise). */
- if (++argn >= argc) /* advance to next argument */
- usage();
- if (keymatch(argv[argn], "90", 2))
- select_transform(JXFORM_ROT_90);
- else if (keymatch(argv[argn], "180", 3))
- select_transform(JXFORM_ROT_180);
- else if (keymatch(argv[argn], "270", 3))
- select_transform(JXFORM_ROT_270);
- else
- usage();
-
- } else if (keymatch(arg, "scans", 1)) {
- /* Set scan script. */
-#ifdef C_MULTISCAN_FILES_SUPPORTED
- if (++argn >= argc) /* advance to next argument */
- usage();
- scansarg = argv[argn];
- /* We must postpone reading the file in case -progressive appears. */
-#else
- fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n",
- progname);
- exit(EXIT_FAILURE);
-#endif
-
- } else if (keymatch(arg, "transpose", 1)) {
- /* Transpose (across UL-to-LR axis). */
- select_transform(JXFORM_TRANSPOSE);
-
- } else if (keymatch(arg, "transverse", 6)) {
- /* Transverse transpose (across UR-to-LL axis). */
- select_transform(JXFORM_TRANSVERSE);
-
- } else if (keymatch(arg, "trim", 3)) {
- /* Trim off any partial edge MCUs that the transform can't handle. */
- transformoption.trim = TRUE;
-
- } else {
- usage(); /* bogus switch */
- }
- }
-
- /* Post-switch-scanning cleanup */
-
- if (for_real) {
-
-#ifdef C_PROGRESSIVE_SUPPORTED
- if (simple_progressive) /* process -progressive; -scans can override */
- jpeg_simple_progression(cinfo);
-#endif
-
-#ifdef C_MULTISCAN_FILES_SUPPORTED
- if (scansarg != NULL) /* process -scans if it was present */
- if (! read_scan_script(cinfo, scansarg))
- usage();
-#endif
- }
-
- return argn; /* return index of next arg (file name) */
-}
-
-
-/*
- * The main program.
- */
-
-int
-main (int argc, char **argv)
-{
- struct jpeg_decompress_struct srcinfo;
- struct jpeg_compress_struct dstinfo;
- struct jpeg_error_mgr jsrcerr, jdsterr;
-#ifdef PROGRESS_REPORT
- struct cdjpeg_progress_mgr progress;
-#endif
- jvirt_barray_ptr * src_coef_arrays;
- jvirt_barray_ptr * dst_coef_arrays;
- int file_index;
- FILE * input_file;
- FILE * output_file;
-
- /* On Mac, fetch a command line. */
-#ifdef USE_CCOMMAND
- argc = ccommand(&argv);
-#endif
-
- progname = argv[0];
- if (progname == NULL || progname[0] == 0)
- progname = "jpegtran"; /* in case C library doesn't provide it */
-
- /* Initialize the JPEG decompression object with default error handling. */
- srcinfo.err = jpeg_std_error(&jsrcerr);
- jpeg_create_decompress(&srcinfo);
- /* Initialize the JPEG compression object with default error handling. */
- dstinfo.err = jpeg_std_error(&jdsterr);
- jpeg_create_compress(&dstinfo);
-
- /* Now safe to enable signal catcher.
- * Note: we assume only the decompression object will have virtual arrays.
- */
-#ifdef NEED_SIGNAL_CATCHER
- enable_signal_catcher((j_common_ptr) &srcinfo);
-#endif
-
- /* Scan command line to find file names.
- * It is convenient to use just one switch-parsing routine, but the switch
- * values read here are mostly ignored; we will rescan the switches after
- * opening the input file. Also note that most of the switches affect the
- * destination JPEG object, so we parse into that and then copy over what
- * needs to affects the source too.
- */
-
- file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE);
- jsrcerr.trace_level = jdsterr.trace_level;
- srcinfo.mem->max_memory_to_use = dstinfo.mem->max_memory_to_use;
-
-#ifdef TWO_FILE_COMMANDLINE
- /* Must have either -outfile switch or explicit output file name */
- if (outfilename == NULL) {
- if (file_index != argc-2) {
- fprintf(stderr, "%s: must name one input and one output file\n",
- progname);
- usage();
- }
- outfilename = argv[file_index+1];
- } else {
- if (file_index != argc-1) {
- fprintf(stderr, "%s: must name one input and one output file\n",
- progname);
- usage();
- }
- }
-#else
- /* Unix style: expect zero or one file name */
- if (file_index < argc-1) {
- fprintf(stderr, "%s: only one input file\n", progname);
- usage();
- }
-#endif /* TWO_FILE_COMMANDLINE */
-
- /* Open the input file. */
- if (file_index < argc) {
- if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
- fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
- exit(EXIT_FAILURE);
- }
- } else {
- /* default input file is stdin */
- input_file = read_stdin();
- }
-
- /* Open the output file. */
- if (outfilename != NULL) {
- if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
- fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
- exit(EXIT_FAILURE);
- }
- } else {
- /* default output file is stdout */
- output_file = write_stdout();
- }
-
-#ifdef PROGRESS_REPORT
- start_progress_monitor((j_common_ptr) &dstinfo, &progress);
-#endif
-
- /* Specify data source for decompression */
- jpeg_stdio_src(&srcinfo, input_file);
-
- /* Enable saving of extra markers that we want to copy */
- jcopy_markers_setup(&srcinfo, copyoption);
-
- /* Read file header */
- (void) jpeg_read_header(&srcinfo, TRUE);
-
- /* Any space needed by a transform option must be requested before
- * jpeg_read_coefficients so that memory allocation will be done right.
- */
-#if TRANSFORMS_SUPPORTED
- jtransform_request_workspace(&srcinfo, &transformoption);
-#endif
-
- /* Read source file as DCT coefficients */
- src_coef_arrays = jpeg_read_coefficients(&srcinfo);
-
- /* Initialize destination compression parameters from source values */
- jpeg_copy_critical_parameters(&srcinfo, &dstinfo);
-
- /* Adjust destination parameters if required by transform options;
- * also find out which set of coefficient arrays will hold the output.
- */
-#if TRANSFORMS_SUPPORTED
- dst_coef_arrays = jtransform_adjust_parameters(&srcinfo, &dstinfo,
- src_coef_arrays,
- &transformoption);
-#else
- dst_coef_arrays = src_coef_arrays;
-#endif
-
- /* Adjust default compression parameters by re-parsing the options */
- file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE);
-
- /* Specify data destination for compression */
- jpeg_stdio_dest(&dstinfo, output_file);
-
- /* Start compressor (note no image data is actually written here) */
- jpeg_write_coefficients(&dstinfo, dst_coef_arrays);
-
- /* Copy to the output file any extra markers that we want to preserve */
- jcopy_markers_execute(&srcinfo, &dstinfo, copyoption);
-
- /* Execute image transformation, if any */
-#if TRANSFORMS_SUPPORTED
- jtransform_execute_transformation(&srcinfo, &dstinfo,
- src_coef_arrays,
- &transformoption);
-#endif
-
- /* Finish compression and release memory */
- jpeg_finish_compress(&dstinfo);
- jpeg_destroy_compress(&dstinfo);
- (void) jpeg_finish_decompress(&srcinfo);
- jpeg_destroy_decompress(&srcinfo);
-
- /* Close files, if we opened them */
- if (input_file != stdin)
- fclose(input_file);
- if (output_file != stdout)
- fclose(output_file);
-
-#ifdef PROGRESS_REPORT
- end_progress_monitor((j_common_ptr) &dstinfo);
-#endif
-
- /* All done. */
- exit(jsrcerr.num_warnings + jdsterr.num_warnings ?EXIT_WARNING:EXIT_SUCCESS);
- return 0; /* suppress no-return-value warnings */
-}
diff --git a/libjpegtwrp/jquant1.c b/libjpegtwrp/jquant1.c
deleted file mode 100644
index b2f96aa15..000000000
--- a/libjpegtwrp/jquant1.c
+++ /dev/null
@@ -1,856 +0,0 @@
-/*
- * jquant1.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains 1-pass color quantization (color mapping) routines.
- * These routines provide mapping to a fixed color map using equally spaced
- * color values. Optional Floyd-Steinberg or ordered dithering is available.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-#ifdef QUANT_1PASS_SUPPORTED
-
-
-/*
- * The main purpose of 1-pass quantization is to provide a fast, if not very
- * high quality, colormapped output capability. A 2-pass quantizer usually
- * gives better visual quality; however, for quantized grayscale output this
- * quantizer is perfectly adequate. Dithering is highly recommended with this
- * quantizer, though you can turn it off if you really want to.
- *
- * In 1-pass quantization the colormap must be chosen in advance of seeing the
- * image. We use a map consisting of all combinations of Ncolors[i] color
- * values for the i'th component. The Ncolors[] values are chosen so that
- * their product, the total number of colors, is no more than that requested.
- * (In most cases, the product will be somewhat less.)
- *
- * Since the colormap is orthogonal, the representative value for each color
- * component can be determined without considering the other components;
- * then these indexes can be combined into a colormap index by a standard
- * N-dimensional-array-subscript calculation. Most of the arithmetic involved
- * can be precalculated and stored in the lookup table colorindex[].
- * colorindex[i][j] maps pixel value j in component i to the nearest
- * representative value (grid plane) for that component; this index is
- * multiplied by the array stride for component i, so that the
- * index of the colormap entry closest to a given pixel value is just
- * sum( colorindex[component-number][pixel-component-value] )
- * Aside from being fast, this scheme allows for variable spacing between
- * representative values with no additional lookup cost.
- *
- * If gamma correction has been applied in color conversion, it might be wise
- * to adjust the color grid spacing so that the representative colors are
- * equidistant in linear space. At this writing, gamma correction is not
- * implemented by jdcolor, so nothing is done here.
- */
-
-
-/* Declarations for ordered dithering.
- *
- * We use a standard 16x16 ordered dither array. The basic concept of ordered
- * dithering is described in many references, for instance Dale Schumacher's
- * chapter II.2 of Graphics Gems II (James Arvo, ed. Academic Press, 1991).
- * In place of Schumacher's comparisons against a "threshold" value, we add a
- * "dither" value to the input pixel and then round the result to the nearest
- * output value. The dither value is equivalent to (0.5 - threshold) times
- * the distance between output values. For ordered dithering, we assume that
- * the output colors are equally spaced; if not, results will probably be
- * worse, since the dither may be too much or too little at a given point.
- *
- * The normal calculation would be to form pixel value + dither, range-limit
- * this to 0..MAXJSAMPLE, and then index into the colorindex table as usual.
- * We can skip the separate range-limiting step by extending the colorindex
- * table in both directions.
- */
-
-#define ODITHER_SIZE 16 /* dimension of dither matrix */
-/* NB: if ODITHER_SIZE is not a power of 2, ODITHER_MASK uses will break */
-#define ODITHER_CELLS (ODITHER_SIZE*ODITHER_SIZE) /* # cells in matrix */
-#define ODITHER_MASK (ODITHER_SIZE-1) /* mask for wrapping around counters */
-
-typedef int ODITHER_MATRIX[ODITHER_SIZE][ODITHER_SIZE];
-typedef int (*ODITHER_MATRIX_PTR)[ODITHER_SIZE];
-
-static const UINT8 base_dither_matrix[ODITHER_SIZE][ODITHER_SIZE] = {
- /* Bayer's order-4 dither array. Generated by the code given in
- * Stephen Hawley's article "Ordered Dithering" in Graphics Gems I.
- * The values in this array must range from 0 to ODITHER_CELLS-1.
- */
- { 0,192, 48,240, 12,204, 60,252, 3,195, 51,243, 15,207, 63,255 },
- { 128, 64,176,112,140, 76,188,124,131, 67,179,115,143, 79,191,127 },
- { 32,224, 16,208, 44,236, 28,220, 35,227, 19,211, 47,239, 31,223 },
- { 160, 96,144, 80,172,108,156, 92,163, 99,147, 83,175,111,159, 95 },
- { 8,200, 56,248, 4,196, 52,244, 11,203, 59,251, 7,199, 55,247 },
- { 136, 72,184,120,132, 68,180,116,139, 75,187,123,135, 71,183,119 },
- { 40,232, 24,216, 36,228, 20,212, 43,235, 27,219, 39,231, 23,215 },
- { 168,104,152, 88,164,100,148, 84,171,107,155, 91,167,103,151, 87 },
- { 2,194, 50,242, 14,206, 62,254, 1,193, 49,241, 13,205, 61,253 },
- { 130, 66,178,114,142, 78,190,126,129, 65,177,113,141, 77,189,125 },
- { 34,226, 18,210, 46,238, 30,222, 33,225, 17,209, 45,237, 29,221 },
- { 162, 98,146, 82,174,110,158, 94,161, 97,145, 81,173,109,157, 93 },
- { 10,202, 58,250, 6,198, 54,246, 9,201, 57,249, 5,197, 53,245 },
- { 138, 74,186,122,134, 70,182,118,137, 73,185,121,133, 69,181,117 },
- { 42,234, 26,218, 38,230, 22,214, 41,233, 25,217, 37,229, 21,213 },
- { 170,106,154, 90,166,102,150, 86,169,105,153, 89,165,101,149, 85 }
-};
-
-
-/* Declarations for Floyd-Steinberg dithering.
- *
- * Errors are accumulated into the array fserrors[], at a resolution of
- * 1/16th of a pixel count. The error at a given pixel is propagated
- * to its not-yet-processed neighbors using the standard F-S fractions,
- * ... (here) 7/16
- * 3/16 5/16 1/16
- * We work left-to-right on even rows, right-to-left on odd rows.
- *
- * We can get away with a single array (holding one row's worth of errors)
- * by using it to store the current row's errors at pixel columns not yet
- * processed, but the next row's errors at columns already processed. We
- * need only a few extra variables to hold the errors immediately around the
- * current column. (If we are lucky, those variables are in registers, but
- * even if not, they're probably cheaper to access than array elements are.)
- *
- * The fserrors[] array is indexed [component#][position].
- * We provide (#columns + 2) entries per component; the extra entry at each
- * end saves us from special-casing the first and last pixels.
- *
- * Note: on a wide image, we might not have enough room in a PC's near data
- * segment to hold the error array; so it is allocated with alloc_large.
- */
-
-#if BITS_IN_JSAMPLE == 8
-typedef INT16 FSERROR; /* 16 bits should be enough */
-typedef int LOCFSERROR; /* use 'int' for calculation temps */
-#else
-typedef INT32 FSERROR; /* may need more than 16 bits */
-typedef INT32 LOCFSERROR; /* be sure calculation temps are big enough */
-#endif
-
-typedef FSERROR FAR *FSERRPTR; /* pointer to error array (in FAR storage!) */
-
-
-/* Private subobject */
-
-#define MAX_Q_COMPS 4 /* max components I can handle */
-
-typedef struct {
- struct jpeg_color_quantizer pub; /* public fields */
-
- /* Initially allocated colormap is saved here */
- JSAMPARRAY sv_colormap; /* The color map as a 2-D pixel array */
- int sv_actual; /* number of entries in use */
-
- JSAMPARRAY colorindex; /* Precomputed mapping for speed */
- /* colorindex[i][j] = index of color closest to pixel value j in component i,
- * premultiplied as described above. Since colormap indexes must fit into
- * JSAMPLEs, the entries of this array will too.
- */
- boolean is_padded; /* is the colorindex padded for odither? */
-
- int Ncolors[MAX_Q_COMPS]; /* # of values alloced to each component */
-
- /* Variables for ordered dithering */
- int row_index; /* cur row's vertical index in dither matrix */
- ODITHER_MATRIX_PTR odither[MAX_Q_COMPS]; /* one dither array per component */
-
- /* Variables for Floyd-Steinberg dithering */
- FSERRPTR fserrors[MAX_Q_COMPS]; /* accumulated errors */
- boolean on_odd_row; /* flag to remember which row we are on */
-} my_cquantizer;
-
-typedef my_cquantizer * my_cquantize_ptr;
-
-
-/*
- * Policy-making subroutines for create_colormap and create_colorindex.
- * These routines determine the colormap to be used. The rest of the module
- * only assumes that the colormap is orthogonal.
- *
- * * select_ncolors decides how to divvy up the available colors
- * among the components.
- * * output_value defines the set of representative values for a component.
- * * largest_input_value defines the mapping from input values to
- * representative values for a component.
- * Note that the latter two routines may impose different policies for
- * different components, though this is not currently done.
- */
-
-
-LOCAL(int)
-select_ncolors (j_decompress_ptr cinfo, int Ncolors[])
-/* Determine allocation of desired colors to components, */
-/* and fill in Ncolors[] array to indicate choice. */
-/* Return value is total number of colors (product of Ncolors[] values). */
-{
- int nc = cinfo->out_color_components; /* number of color components */
- int max_colors = cinfo->desired_number_of_colors;
- int total_colors, iroot, i, j;
- boolean changed;
- long temp;
- static const int RGB_order[3] = { RGB_GREEN, RGB_RED, RGB_BLUE };
-
- /* We can allocate at least the nc'th root of max_colors per component. */
- /* Compute floor(nc'th root of max_colors). */
- iroot = 1;
- do {
- iroot++;
- temp = iroot; /* set temp = iroot ** nc */
- for (i = 1; i < nc; i++)
- temp *= iroot;
- } while (temp <= (long) max_colors); /* repeat till iroot exceeds root */
- iroot--; /* now iroot = floor(root) */
-
- /* Must have at least 2 color values per component */
- if (iroot < 2)
- ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, (int) temp);
-
- /* Initialize to iroot color values for each component */
- total_colors = 1;
- for (i = 0; i < nc; i++) {
- Ncolors[i] = iroot;
- total_colors *= iroot;
- }
- /* We may be able to increment the count for one or more components without
- * exceeding max_colors, though we know not all can be incremented.
- * Sometimes, the first component can be incremented more than once!
- * (Example: for 16 colors, we start at 2*2*2, go to 3*2*2, then 4*2*2.)
- * In RGB colorspace, try to increment G first, then R, then B.
- */
- do {
- changed = FALSE;
- for (i = 0; i < nc; i++) {
- j = (cinfo->out_color_space == JCS_RGB ? RGB_order[i] : i);
- /* calculate new total_colors if Ncolors[j] is incremented */
- temp = total_colors / Ncolors[j];
- temp *= Ncolors[j]+1; /* done in long arith to avoid oflo */
- if (temp > (long) max_colors)
- break; /* won't fit, done with this pass */
- Ncolors[j]++; /* OK, apply the increment */
- total_colors = (int) temp;
- changed = TRUE;
- }
- } while (changed);
-
- return total_colors;
-}
-
-
-LOCAL(int)
-output_value (j_decompress_ptr cinfo, int ci, int j, int maxj)
-/* Return j'th output value, where j will range from 0 to maxj */
-/* The output values must fall in 0..MAXJSAMPLE in increasing order */
-{
- /* We always provide values 0 and MAXJSAMPLE for each component;
- * any additional values are equally spaced between these limits.
- * (Forcing the upper and lower values to the limits ensures that
- * dithering can't produce a color outside the selected gamut.)
- */
- return (int) (((INT32) j * MAXJSAMPLE + maxj/2) / maxj);
-}
-
-
-LOCAL(int)
-largest_input_value (j_decompress_ptr cinfo, int ci, int j, int maxj)
-/* Return largest input value that should map to j'th output value */
-/* Must have largest(j=0) >= 0, and largest(j=maxj) >= MAXJSAMPLE */
-{
- /* Breakpoints are halfway between values returned by output_value */
- return (int) (((INT32) (2*j + 1) * MAXJSAMPLE + maxj) / (2*maxj));
-}
-
-
-/*
- * Create the colormap.
- */
-
-LOCAL(void)
-create_colormap (j_decompress_ptr cinfo)
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- JSAMPARRAY colormap; /* Created colormap */
- int total_colors; /* Number of distinct output colors */
- int i,j,k, nci, blksize, blkdist, ptr, val;
-
- /* Select number of colors for each component */
- total_colors = select_ncolors(cinfo, cquantize->Ncolors);
-
- /* Report selected color counts */
- if (cinfo->out_color_components == 3)
- TRACEMS4(cinfo, 1, JTRC_QUANT_3_NCOLORS,
- total_colors, cquantize->Ncolors[0],
- cquantize->Ncolors[1], cquantize->Ncolors[2]);
- else
- TRACEMS1(cinfo, 1, JTRC_QUANT_NCOLORS, total_colors);
-
- /* Allocate and fill in the colormap. */
- /* The colors are ordered in the map in standard row-major order, */
- /* i.e. rightmost (highest-indexed) color changes most rapidly. */
-
- colormap = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (JDIMENSION) total_colors, (JDIMENSION) cinfo->out_color_components);
-
- /* blksize is number of adjacent repeated entries for a component */
- /* blkdist is distance between groups of identical entries for a component */
- blkdist = total_colors;
-
- for (i = 0; i < cinfo->out_color_components; i++) {
- /* fill in colormap entries for i'th color component */
- nci = cquantize->Ncolors[i]; /* # of distinct values for this color */
- blksize = blkdist / nci;
- for (j = 0; j < nci; j++) {
- /* Compute j'th output value (out of nci) for component */
- val = output_value(cinfo, i, j, nci-1);
- /* Fill in all colormap entries that have this value of this component */
- for (ptr = j * blksize; ptr < total_colors; ptr += blkdist) {
- /* fill in blksize entries beginning at ptr */
- for (k = 0; k < blksize; k++)
- colormap[i][ptr+k] = (JSAMPLE) val;
- }
- }
- blkdist = blksize; /* blksize of this color is blkdist of next */
- }
-
- /* Save the colormap in private storage,
- * where it will survive color quantization mode changes.
- */
- cquantize->sv_colormap = colormap;
- cquantize->sv_actual = total_colors;
-}
-
-
-/*
- * Create the color index table.
- */
-
-LOCAL(void)
-create_colorindex (j_decompress_ptr cinfo)
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- JSAMPROW indexptr;
- int i,j,k, nci, blksize, val, pad;
-
- /* For ordered dither, we pad the color index tables by MAXJSAMPLE in
- * each direction (input index values can be -MAXJSAMPLE .. 2*MAXJSAMPLE).
- * This is not necessary in the other dithering modes. However, we
- * flag whether it was done in case user changes dithering mode.
- */
- if (cinfo->dither_mode == JDITHER_ORDERED) {
- pad = MAXJSAMPLE*2;
- cquantize->is_padded = TRUE;
- } else {
- pad = 0;
- cquantize->is_padded = FALSE;
- }
-
- cquantize->colorindex = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (JDIMENSION) (MAXJSAMPLE+1 + pad),
- (JDIMENSION) cinfo->out_color_components);
-
- /* blksize is number of adjacent repeated entries for a component */
- blksize = cquantize->sv_actual;
-
- for (i = 0; i < cinfo->out_color_components; i++) {
- /* fill in colorindex entries for i'th color component */
- nci = cquantize->Ncolors[i]; /* # of distinct values for this color */
- blksize = blksize / nci;
-
- /* adjust colorindex pointers to provide padding at negative indexes. */
- if (pad)
- cquantize->colorindex[i] += MAXJSAMPLE;
-
- /* in loop, val = index of current output value, */
- /* and k = largest j that maps to current val */
- indexptr = cquantize->colorindex[i];
- val = 0;
- k = largest_input_value(cinfo, i, 0, nci-1);
- for (j = 0; j <= MAXJSAMPLE; j++) {
- while (j > k) /* advance val if past boundary */
- k = largest_input_value(cinfo, i, ++val, nci-1);
- /* premultiply so that no multiplication needed in main processing */
- indexptr[j] = (JSAMPLE) (val * blksize);
- }
- /* Pad at both ends if necessary */
- if (pad)
- for (j = 1; j <= MAXJSAMPLE; j++) {
- indexptr[-j] = indexptr[0];
- indexptr[MAXJSAMPLE+j] = indexptr[MAXJSAMPLE];
- }
- }
-}
-
-
-/*
- * Create an ordered-dither array for a component having ncolors
- * distinct output values.
- */
-
-LOCAL(ODITHER_MATRIX_PTR)
-make_odither_array (j_decompress_ptr cinfo, int ncolors)
-{
- ODITHER_MATRIX_PTR odither;
- int j,k;
- INT32 num,den;
-
- odither = (ODITHER_MATRIX_PTR)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(ODITHER_MATRIX));
- /* The inter-value distance for this color is MAXJSAMPLE/(ncolors-1).
- * Hence the dither value for the matrix cell with fill order f
- * (f=0..N-1) should be (N-1-2*f)/(2*N) * MAXJSAMPLE/(ncolors-1).
- * On 16-bit-int machine, be careful to avoid overflow.
- */
- den = 2 * ODITHER_CELLS * ((INT32) (ncolors - 1));
- for (j = 0; j < ODITHER_SIZE; j++) {
- for (k = 0; k < ODITHER_SIZE; k++) {
- num = ((INT32) (ODITHER_CELLS-1 - 2*((int)base_dither_matrix[j][k])))
- * MAXJSAMPLE;
- /* Ensure round towards zero despite C's lack of consistency
- * about rounding negative values in integer division...
- */
- odither[j][k] = (int) (num<0 ? -((-num)/den) : num/den);
- }
- }
- return odither;
-}
-
-
-/*
- * Create the ordered-dither tables.
- * Components having the same number of representative colors may
- * share a dither table.
- */
-
-LOCAL(void)
-create_odither_tables (j_decompress_ptr cinfo)
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- ODITHER_MATRIX_PTR odither;
- int i, j, nci;
-
- for (i = 0; i < cinfo->out_color_components; i++) {
- nci = cquantize->Ncolors[i]; /* # of distinct values for this color */
- odither = NULL; /* search for matching prior component */
- for (j = 0; j < i; j++) {
- if (nci == cquantize->Ncolors[j]) {
- odither = cquantize->odither[j];
- break;
- }
- }
- if (odither == NULL) /* need a new table? */
- odither = make_odither_array(cinfo, nci);
- cquantize->odither[i] = odither;
- }
-}
-
-
-/*
- * Map some rows of pixels to the output colormapped representation.
- */
-
-METHODDEF(void)
-color_quantize (j_decompress_ptr cinfo, JSAMPARRAY input_buf,
- JSAMPARRAY output_buf, int num_rows)
-/* General case, no dithering */
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- JSAMPARRAY colorindex = cquantize->colorindex;
- register int pixcode, ci;
- register JSAMPROW ptrin, ptrout;
- int row;
- JDIMENSION col;
- JDIMENSION width = cinfo->output_width;
- register int nc = cinfo->out_color_components;
-
- for (row = 0; row < num_rows; row++) {
- ptrin = input_buf[row];
- ptrout = output_buf[row];
- for (col = width; col > 0; col--) {
- pixcode = 0;
- for (ci = 0; ci < nc; ci++) {
- pixcode += GETJSAMPLE(colorindex[ci][GETJSAMPLE(*ptrin++)]);
- }
- *ptrout++ = (JSAMPLE) pixcode;
- }
- }
-}
-
-
-METHODDEF(void)
-color_quantize3 (j_decompress_ptr cinfo, JSAMPARRAY input_buf,
- JSAMPARRAY output_buf, int num_rows)
-/* Fast path for out_color_components==3, no dithering */
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- register int pixcode;
- register JSAMPROW ptrin, ptrout;
- JSAMPROW colorindex0 = cquantize->colorindex[0];
- JSAMPROW colorindex1 = cquantize->colorindex[1];
- JSAMPROW colorindex2 = cquantize->colorindex[2];
- int row;
- JDIMENSION col;
- JDIMENSION width = cinfo->output_width;
-
- for (row = 0; row < num_rows; row++) {
- ptrin = input_buf[row];
- ptrout = output_buf[row];
- for (col = width; col > 0; col--) {
- pixcode = GETJSAMPLE(colorindex0[GETJSAMPLE(*ptrin++)]);
- pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*ptrin++)]);
- pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*ptrin++)]);
- *ptrout++ = (JSAMPLE) pixcode;
- }
- }
-}
-
-
-METHODDEF(void)
-quantize_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf,
- JSAMPARRAY output_buf, int num_rows)
-/* General case, with ordered dithering */
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- register JSAMPROW input_ptr;
- register JSAMPROW output_ptr;
- JSAMPROW colorindex_ci;
- int * dither; /* points to active row of dither matrix */
- int row_index, col_index; /* current indexes into dither matrix */
- int nc = cinfo->out_color_components;
- int ci;
- int row;
- JDIMENSION col;
- JDIMENSION width = cinfo->output_width;
-
- for (row = 0; row < num_rows; row++) {
- /* Initialize output values to 0 so can process components separately */
- jzero_far((void FAR *) output_buf[row],
- (size_t) (width * SIZEOF(JSAMPLE)));
- row_index = cquantize->row_index;
- for (ci = 0; ci < nc; ci++) {
- input_ptr = input_buf[row] + ci;
- output_ptr = output_buf[row];
- colorindex_ci = cquantize->colorindex[ci];
- dither = cquantize->odither[ci][row_index];
- col_index = 0;
-
- for (col = width; col > 0; col--) {
- /* Form pixel value + dither, range-limit to 0..MAXJSAMPLE,
- * select output value, accumulate into output code for this pixel.
- * Range-limiting need not be done explicitly, as we have extended
- * the colorindex table to produce the right answers for out-of-range
- * inputs. The maximum dither is +- MAXJSAMPLE; this sets the
- * required amount of padding.
- */
- *output_ptr += colorindex_ci[GETJSAMPLE(*input_ptr)+dither[col_index]];
- input_ptr += nc;
- output_ptr++;
- col_index = (col_index + 1) & ODITHER_MASK;
- }
- }
- /* Advance row index for next row */
- row_index = (row_index + 1) & ODITHER_MASK;
- cquantize->row_index = row_index;
- }
-}
-
-
-METHODDEF(void)
-quantize3_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf,
- JSAMPARRAY output_buf, int num_rows)
-/* Fast path for out_color_components==3, with ordered dithering */
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- register int pixcode;
- register JSAMPROW input_ptr;
- register JSAMPROW output_ptr;
- JSAMPROW colorindex0 = cquantize->colorindex[0];
- JSAMPROW colorindex1 = cquantize->colorindex[1];
- JSAMPROW colorindex2 = cquantize->colorindex[2];
- int * dither0; /* points to active row of dither matrix */
- int * dither1;
- int * dither2;
- int row_index, col_index; /* current indexes into dither matrix */
- int row;
- JDIMENSION col;
- JDIMENSION width = cinfo->output_width;
-
- for (row = 0; row < num_rows; row++) {
- row_index = cquantize->row_index;
- input_ptr = input_buf[row];
- output_ptr = output_buf[row];
- dither0 = cquantize->odither[0][row_index];
- dither1 = cquantize->odither[1][row_index];
- dither2 = cquantize->odither[2][row_index];
- col_index = 0;
-
- for (col = width; col > 0; col--) {
- pixcode = GETJSAMPLE(colorindex0[GETJSAMPLE(*input_ptr++) +
- dither0[col_index]]);
- pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*input_ptr++) +
- dither1[col_index]]);
- pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*input_ptr++) +
- dither2[col_index]]);
- *output_ptr++ = (JSAMPLE) pixcode;
- col_index = (col_index + 1) & ODITHER_MASK;
- }
- row_index = (row_index + 1) & ODITHER_MASK;
- cquantize->row_index = row_index;
- }
-}
-
-
-METHODDEF(void)
-quantize_fs_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf,
- JSAMPARRAY output_buf, int num_rows)
-/* General case, with Floyd-Steinberg dithering */
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- register LOCFSERROR cur; /* current error or pixel value */
- LOCFSERROR belowerr; /* error for pixel below cur */
- LOCFSERROR bpreverr; /* error for below/prev col */
- LOCFSERROR bnexterr; /* error for below/next col */
- LOCFSERROR delta;
- register FSERRPTR errorptr; /* => fserrors[] at column before current */
- register JSAMPROW input_ptr;
- register JSAMPROW output_ptr;
- JSAMPROW colorindex_ci;
- JSAMPROW colormap_ci;
- int pixcode;
- int nc = cinfo->out_color_components;
- int dir; /* 1 for left-to-right, -1 for right-to-left */
- int dirnc; /* dir * nc */
- int ci;
- int row;
- JDIMENSION col;
- JDIMENSION width = cinfo->output_width;
- JSAMPLE *range_limit = cinfo->sample_range_limit;
- SHIFT_TEMPS
-
- for (row = 0; row < num_rows; row++) {
- /* Initialize output values to 0 so can process components separately */
- jzero_far((void FAR *) output_buf[row],
- (size_t) (width * SIZEOF(JSAMPLE)));
- for (ci = 0; ci < nc; ci++) {
- input_ptr = input_buf[row] + ci;
- output_ptr = output_buf[row];
- if (cquantize->on_odd_row) {
- /* work right to left in this row */
- input_ptr += (width-1) * nc; /* so point to rightmost pixel */
- output_ptr += width-1;
- dir = -1;
- dirnc = -nc;
- errorptr = cquantize->fserrors[ci] + (width+1); /* => entry after last column */
- } else {
- /* work left to right in this row */
- dir = 1;
- dirnc = nc;
- errorptr = cquantize->fserrors[ci]; /* => entry before first column */
- }
- colorindex_ci = cquantize->colorindex[ci];
- colormap_ci = cquantize->sv_colormap[ci];
- /* Preset error values: no error propagated to first pixel from left */
- cur = 0;
- /* and no error propagated to row below yet */
- belowerr = bpreverr = 0;
-
- for (col = width; col > 0; col--) {
- /* cur holds the error propagated from the previous pixel on the
- * current line. Add the error propagated from the previous line
- * to form the complete error correction term for this pixel, and
- * round the error term (which is expressed * 16) to an integer.
- * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct
- * for either sign of the error value.
- * Note: errorptr points to *previous* column's array entry.
- */
- cur = RIGHT_SHIFT(cur + errorptr[dir] + 8, 4);
- /* Form pixel value + error, and range-limit to 0..MAXJSAMPLE.
- * The maximum error is +- MAXJSAMPLE; this sets the required size
- * of the range_limit array.
- */
- cur += GETJSAMPLE(*input_ptr);
- cur = GETJSAMPLE(range_limit[cur]);
- /* Select output value, accumulate into output code for this pixel */
- pixcode = GETJSAMPLE(colorindex_ci[cur]);
- *output_ptr += (JSAMPLE) pixcode;
- /* Compute actual representation error at this pixel */
- /* Note: we can do this even though we don't have the final */
- /* pixel code, because the colormap is orthogonal. */
- cur -= GETJSAMPLE(colormap_ci[pixcode]);
- /* Compute error fractions to be propagated to adjacent pixels.
- * Add these into the running sums, and simultaneously shift the
- * next-line error sums left by 1 column.
- */
- bnexterr = cur;
- delta = cur * 2;
- cur += delta; /* form error * 3 */
- errorptr[0] = (FSERROR) (bpreverr + cur);
- cur += delta; /* form error * 5 */
- bpreverr = belowerr + cur;
- belowerr = bnexterr;
- cur += delta; /* form error * 7 */
- /* At this point cur contains the 7/16 error value to be propagated
- * to the next pixel on the current line, and all the errors for the
- * next line have been shifted over. We are therefore ready to move on.
- */
- input_ptr += dirnc; /* advance input ptr to next column */
- output_ptr += dir; /* advance output ptr to next column */
- errorptr += dir; /* advance errorptr to current column */
- }
- /* Post-loop cleanup: we must unload the final error value into the
- * final fserrors[] entry. Note we need not unload belowerr because
- * it is for the dummy column before or after the actual array.
- */
- errorptr[0] = (FSERROR) bpreverr; /* unload prev err into array */
- }
- cquantize->on_odd_row = (cquantize->on_odd_row ? FALSE : TRUE);
- }
-}
-
-
-/*
- * Allocate workspace for Floyd-Steinberg errors.
- */
-
-LOCAL(void)
-alloc_fs_workspace (j_decompress_ptr cinfo)
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- size_t arraysize;
- int i;
-
- arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR));
- for (i = 0; i < cinfo->out_color_components; i++) {
- cquantize->fserrors[i] = (FSERRPTR)
- (*cinfo->mem->alloc_large)((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize);
- }
-}
-
-
-/*
- * Initialize for one-pass color quantization.
- */
-
-METHODDEF(void)
-start_pass_1_quant (j_decompress_ptr cinfo, boolean is_pre_scan)
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- size_t arraysize;
- int i;
-
- /* Install my colormap. */
- cinfo->colormap = cquantize->sv_colormap;
- cinfo->actual_number_of_colors = cquantize->sv_actual;
-
- /* Initialize for desired dithering mode. */
- switch (cinfo->dither_mode) {
- case JDITHER_NONE:
- if (cinfo->out_color_components == 3)
- cquantize->pub.color_quantize = color_quantize3;
- else
- cquantize->pub.color_quantize = color_quantize;
- break;
- case JDITHER_ORDERED:
- if (cinfo->out_color_components == 3)
- cquantize->pub.color_quantize = quantize3_ord_dither;
- else
- cquantize->pub.color_quantize = quantize_ord_dither;
- cquantize->row_index = 0; /* initialize state for ordered dither */
- /* If user changed to ordered dither from another mode,
- * we must recreate the color index table with padding.
- * This will cost extra space, but probably isn't very likely.
- */
- if (! cquantize->is_padded)
- create_colorindex(cinfo);
- /* Create ordered-dither tables if we didn't already. */
- if (cquantize->odither[0] == NULL)
- create_odither_tables(cinfo);
- break;
- case JDITHER_FS:
- cquantize->pub.color_quantize = quantize_fs_dither;
- cquantize->on_odd_row = FALSE; /* initialize state for F-S dither */
- /* Allocate Floyd-Steinberg workspace if didn't already. */
- if (cquantize->fserrors[0] == NULL)
- alloc_fs_workspace(cinfo);
- /* Initialize the propagated errors to zero. */
- arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR));
- for (i = 0; i < cinfo->out_color_components; i++)
- jzero_far((void FAR *) cquantize->fserrors[i], arraysize);
- break;
- default:
- ERREXIT(cinfo, JERR_NOT_COMPILED);
- break;
- }
-}
-
-
-/*
- * Finish up at the end of the pass.
- */
-
-METHODDEF(void)
-finish_pass_1_quant (j_decompress_ptr cinfo)
-{
- /* no work in 1-pass case */
-}
-
-
-/*
- * Switch to a new external colormap between output passes.
- * Shouldn't get to this module!
- */
-
-METHODDEF(void)
-new_color_map_1_quant (j_decompress_ptr cinfo)
-{
- ERREXIT(cinfo, JERR_MODE_CHANGE);
-}
-
-
-/*
- * Module initialization routine for 1-pass color quantization.
- */
-
-GLOBAL(void)
-jinit_1pass_quantizer (j_decompress_ptr cinfo)
-{
- my_cquantize_ptr cquantize;
-
- cquantize = (my_cquantize_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_cquantizer));
- cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize;
- cquantize->pub.start_pass = start_pass_1_quant;
- cquantize->pub.finish_pass = finish_pass_1_quant;
- cquantize->pub.new_color_map = new_color_map_1_quant;
- cquantize->fserrors[0] = NULL; /* Flag FS workspace not allocated */
- cquantize->odither[0] = NULL; /* Also flag odither arrays not allocated */
-
- /* Make sure my internal arrays won't overflow */
- if (cinfo->out_color_components > MAX_Q_COMPS)
- ERREXIT1(cinfo, JERR_QUANT_COMPONENTS, MAX_Q_COMPS);
- /* Make sure colormap indexes can be represented by JSAMPLEs */
- if (cinfo->desired_number_of_colors > (MAXJSAMPLE+1))
- ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXJSAMPLE+1);
-
- /* Create the colormap and color index table. */
- create_colormap(cinfo);
- create_colorindex(cinfo);
-
- /* Allocate Floyd-Steinberg workspace now if requested.
- * We do this now since it is FAR storage and may affect the memory
- * manager's space calculations. If the user changes to FS dither
- * mode in a later pass, we will allocate the space then, and will
- * possibly overrun the max_memory_to_use setting.
- */
- if (cinfo->dither_mode == JDITHER_FS)
- alloc_fs_workspace(cinfo);
-}
-
-#endif /* QUANT_1PASS_SUPPORTED */
diff --git a/libjpegtwrp/jquant2.c b/libjpegtwrp/jquant2.c
deleted file mode 100644
index af601e334..000000000
--- a/libjpegtwrp/jquant2.c
+++ /dev/null
@@ -1,1310 +0,0 @@
-/*
- * jquant2.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains 2-pass color quantization (color mapping) routines.
- * These routines provide selection of a custom color map for an image,
- * followed by mapping of the image to that color map, with optional
- * Floyd-Steinberg dithering.
- * It is also possible to use just the second pass to map to an arbitrary
- * externally-given color map.
- *
- * Note: ordered dithering is not supported, since there isn't any fast
- * way to compute intercolor distances; it's unclear that ordered dither's
- * fundamental assumptions even hold with an irregularly spaced color map.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-#ifdef QUANT_2PASS_SUPPORTED
-
-
-/*
- * This module implements the well-known Heckbert paradigm for color
- * quantization. Most of the ideas used here can be traced back to
- * Heckbert's seminal paper
- * Heckbert, Paul. "Color Image Quantization for Frame Buffer Display",
- * Proc. SIGGRAPH '82, Computer Graphics v.16 #3 (July 1982), pp 297-304.
- *
- * In the first pass over the image, we accumulate a histogram showing the
- * usage count of each possible color. To keep the histogram to a reasonable
- * size, we reduce the precision of the input; typical practice is to retain
- * 5 or 6 bits per color, so that 8 or 4 different input values are counted
- * in the same histogram cell.
- *
- * Next, the color-selection step begins with a box representing the whole
- * color space, and repeatedly splits the "largest" remaining box until we
- * have as many boxes as desired colors. Then the mean color in each
- * remaining box becomes one of the possible output colors.
- *
- * The second pass over the image maps each input pixel to the closest output
- * color (optionally after applying a Floyd-Steinberg dithering correction).
- * This mapping is logically trivial, but making it go fast enough requires
- * considerable care.
- *
- * Heckbert-style quantizers vary a good deal in their policies for choosing
- * the "largest" box and deciding where to cut it. The particular policies
- * used here have proved out well in experimental comparisons, but better ones
- * may yet be found.
- *
- * In earlier versions of the IJG code, this module quantized in YCbCr color
- * space, processing the raw upsampled data without a color conversion step.
- * This allowed the color conversion math to be done only once per colormap
- * entry, not once per pixel. However, that optimization precluded other
- * useful optimizations (such as merging color conversion with upsampling)
- * and it also interfered with desired capabilities such as quantizing to an
- * externally-supplied colormap. We have therefore abandoned that approach.
- * The present code works in the post-conversion color space, typically RGB.
- *
- * To improve the visual quality of the results, we actually work in scaled
- * RGB space, giving G distances more weight than R, and R in turn more than
- * B. To do everything in integer math, we must use integer scale factors.
- * The 2/3/1 scale factors used here correspond loosely to the relative
- * weights of the colors in the NTSC grayscale equation.
- * If you want to use this code to quantize a non-RGB color space, you'll
- * probably need to change these scale factors.
- */
-
-#define R_SCALE 2 /* scale R distances by this much */
-#define G_SCALE 3 /* scale G distances by this much */
-#define B_SCALE 1 /* and B by this much */
-
-/* Relabel R/G/B as components 0/1/2, respecting the RGB ordering defined
- * in jmorecfg.h. As the code stands, it will do the right thing for R,G,B
- * and B,G,R orders. If you define some other weird order in jmorecfg.h,
- * you'll get compile errors until you extend this logic. In that case
- * you'll probably want to tweak the histogram sizes too.
- */
-
-#if RGB_RED == 0
-#define C0_SCALE R_SCALE
-#endif
-#if RGB_BLUE == 0
-#define C0_SCALE B_SCALE
-#endif
-#if RGB_GREEN == 1
-#define C1_SCALE G_SCALE
-#endif
-#if RGB_RED == 2
-#define C2_SCALE R_SCALE
-#endif
-#if RGB_BLUE == 2
-#define C2_SCALE B_SCALE
-#endif
-
-
-/*
- * First we have the histogram data structure and routines for creating it.
- *
- * The number of bits of precision can be adjusted by changing these symbols.
- * We recommend keeping 6 bits for G and 5 each for R and B.
- * If you have plenty of memory and cycles, 6 bits all around gives marginally
- * better results; if you are short of memory, 5 bits all around will save
- * some space but degrade the results.
- * To maintain a fully accurate histogram, we'd need to allocate a "long"
- * (preferably unsigned long) for each cell. In practice this is overkill;
- * we can get by with 16 bits per cell. Few of the cell counts will overflow,
- * and clamping those that do overflow to the maximum value will give close-
- * enough results. This reduces the recommended histogram size from 256Kb
- * to 128Kb, which is a useful savings on PC-class machines.
- * (In the second pass the histogram space is re-used for pixel mapping data;
- * in that capacity, each cell must be able to store zero to the number of
- * desired colors. 16 bits/cell is plenty for that too.)
- * Since the JPEG code is intended to run in small memory model on 80x86
- * machines, we can't just allocate the histogram in one chunk. Instead
- * of a true 3-D array, we use a row of pointers to 2-D arrays. Each
- * pointer corresponds to a C0 value (typically 2^5 = 32 pointers) and
- * each 2-D array has 2^6*2^5 = 2048 or 2^6*2^6 = 4096 entries. Note that
- * on 80x86 machines, the pointer row is in near memory but the actual
- * arrays are in far memory (same arrangement as we use for image arrays).
- */
-
-#define MAXNUMCOLORS (MAXJSAMPLE+1) /* maximum size of colormap */
-
-/* These will do the right thing for either R,G,B or B,G,R color order,
- * but you may not like the results for other color orders.
- */
-#define HIST_C0_BITS 5 /* bits of precision in R/B histogram */
-#define HIST_C1_BITS 6 /* bits of precision in G histogram */
-#define HIST_C2_BITS 5 /* bits of precision in B/R histogram */
-
-/* Number of elements along histogram axes. */
-#define HIST_C0_ELEMS (1<<HIST_C0_BITS)
-#define HIST_C1_ELEMS (1<<HIST_C1_BITS)
-#define HIST_C2_ELEMS (1<<HIST_C2_BITS)
-
-/* These are the amounts to shift an input value to get a histogram index. */
-#define C0_SHIFT (BITS_IN_JSAMPLE-HIST_C0_BITS)
-#define C1_SHIFT (BITS_IN_JSAMPLE-HIST_C1_BITS)
-#define C2_SHIFT (BITS_IN_JSAMPLE-HIST_C2_BITS)
-
-
-typedef UINT16 histcell; /* histogram cell; prefer an unsigned type */
-
-typedef histcell FAR * histptr; /* for pointers to histogram cells */
-
-typedef histcell hist1d[HIST_C2_ELEMS]; /* typedefs for the array */
-typedef hist1d FAR * hist2d; /* type for the 2nd-level pointers */
-typedef hist2d * hist3d; /* type for top-level pointer */
-
-
-/* Declarations for Floyd-Steinberg dithering.
- *
- * Errors are accumulated into the array fserrors[], at a resolution of
- * 1/16th of a pixel count. The error at a given pixel is propagated
- * to its not-yet-processed neighbors using the standard F-S fractions,
- * ... (here) 7/16
- * 3/16 5/16 1/16
- * We work left-to-right on even rows, right-to-left on odd rows.
- *
- * We can get away with a single array (holding one row's worth of errors)
- * by using it to store the current row's errors at pixel columns not yet
- * processed, but the next row's errors at columns already processed. We
- * need only a few extra variables to hold the errors immediately around the
- * current column. (If we are lucky, those variables are in registers, but
- * even if not, they're probably cheaper to access than array elements are.)
- *
- * The fserrors[] array has (#columns + 2) entries; the extra entry at
- * each end saves us from special-casing the first and last pixels.
- * Each entry is three values long, one value for each color component.
- *
- * Note: on a wide image, we might not have enough room in a PC's near data
- * segment to hold the error array; so it is allocated with alloc_large.
- */
-
-#if BITS_IN_JSAMPLE == 8
-typedef INT16 FSERROR; /* 16 bits should be enough */
-typedef int LOCFSERROR; /* use 'int' for calculation temps */
-#else
-typedef INT32 FSERROR; /* may need more than 16 bits */
-typedef INT32 LOCFSERROR; /* be sure calculation temps are big enough */
-#endif
-
-typedef FSERROR FAR *FSERRPTR; /* pointer to error array (in FAR storage!) */
-
-
-/* Private subobject */
-
-typedef struct {
- struct jpeg_color_quantizer pub; /* public fields */
-
- /* Space for the eventually created colormap is stashed here */
- JSAMPARRAY sv_colormap; /* colormap allocated at init time */
- int desired; /* desired # of colors = size of colormap */
-
- /* Variables for accumulating image statistics */
- hist3d histogram; /* pointer to the histogram */
-
- boolean needs_zeroed; /* TRUE if next pass must zero histogram */
-
- /* Variables for Floyd-Steinberg dithering */
- FSERRPTR fserrors; /* accumulated errors */
- boolean on_odd_row; /* flag to remember which row we are on */
- int * error_limiter; /* table for clamping the applied error */
-} my_cquantizer;
-
-typedef my_cquantizer * my_cquantize_ptr;
-
-
-/*
- * Prescan some rows of pixels.
- * In this module the prescan simply updates the histogram, which has been
- * initialized to zeroes by start_pass.
- * An output_buf parameter is required by the method signature, but no data
- * is actually output (in fact the buffer controller is probably passing a
- * NULL pointer).
- */
-
-METHODDEF(void)
-prescan_quantize (j_decompress_ptr cinfo, JSAMPARRAY input_buf,
- JSAMPARRAY output_buf, int num_rows)
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- register JSAMPROW ptr;
- register histptr histp;
- register hist3d histogram = cquantize->histogram;
- int row;
- JDIMENSION col;
- JDIMENSION width = cinfo->output_width;
-
- for (row = 0; row < num_rows; row++) {
- ptr = input_buf[row];
- for (col = width; col > 0; col--) {
- /* get pixel value and index into the histogram */
- histp = & histogram[GETJSAMPLE(ptr[0]) >> C0_SHIFT]
- [GETJSAMPLE(ptr[1]) >> C1_SHIFT]
- [GETJSAMPLE(ptr[2]) >> C2_SHIFT];
- /* increment, check for overflow and undo increment if so. */
- if (++(*histp) <= 0)
- (*histp)--;
- ptr += 3;
- }
- }
-}
-
-
-/*
- * Next we have the really interesting routines: selection of a colormap
- * given the completed histogram.
- * These routines work with a list of "boxes", each representing a rectangular
- * subset of the input color space (to histogram precision).
- */
-
-typedef struct {
- /* The bounds of the box (inclusive); expressed as histogram indexes */
- int c0min, c0max;
- int c1min, c1max;
- int c2min, c2max;
- /* The volume (actually 2-norm) of the box */
- INT32 volume;
- /* The number of nonzero histogram cells within this box */
- long colorcount;
-} box;
-
-typedef box * boxptr;
-
-
-LOCAL(boxptr)
-find_biggest_color_pop (boxptr boxlist, int numboxes)
-/* Find the splittable box with the largest color population */
-/* Returns NULL if no splittable boxes remain */
-{
- register boxptr boxp;
- register int i;
- register long maxc = 0;
- boxptr which = NULL;
-
- for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) {
- if (boxp->colorcount > maxc && boxp->volume > 0) {
- which = boxp;
- maxc = boxp->colorcount;
- }
- }
- return which;
-}
-
-
-LOCAL(boxptr)
-find_biggest_volume (boxptr boxlist, int numboxes)
-/* Find the splittable box with the largest (scaled) volume */
-/* Returns NULL if no splittable boxes remain */
-{
- register boxptr boxp;
- register int i;
- register INT32 maxv = 0;
- boxptr which = NULL;
-
- for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) {
- if (boxp->volume > maxv) {
- which = boxp;
- maxv = boxp->volume;
- }
- }
- return which;
-}
-
-
-LOCAL(void)
-update_box (j_decompress_ptr cinfo, boxptr boxp)
-/* Shrink the min/max bounds of a box to enclose only nonzero elements, */
-/* and recompute its volume and population */
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- hist3d histogram = cquantize->histogram;
- histptr histp;
- int c0,c1,c2;
- int c0min,c0max,c1min,c1max,c2min,c2max;
- INT32 dist0,dist1,dist2;
- long ccount;
-
- c0min = boxp->c0min; c0max = boxp->c0max;
- c1min = boxp->c1min; c1max = boxp->c1max;
- c2min = boxp->c2min; c2max = boxp->c2max;
-
- if (c0max > c0min)
- for (c0 = c0min; c0 <= c0max; c0++)
- for (c1 = c1min; c1 <= c1max; c1++) {
- histp = & histogram[c0][c1][c2min];
- for (c2 = c2min; c2 <= c2max; c2++)
- if (*histp++ != 0) {
- boxp->c0min = c0min = c0;
- goto have_c0min;
- }
- }
- have_c0min:
- if (c0max > c0min)
- for (c0 = c0max; c0 >= c0min; c0--)
- for (c1 = c1min; c1 <= c1max; c1++) {
- histp = & histogram[c0][c1][c2min];
- for (c2 = c2min; c2 <= c2max; c2++)
- if (*histp++ != 0) {
- boxp->c0max = c0max = c0;
- goto have_c0max;
- }
- }
- have_c0max:
- if (c1max > c1min)
- for (c1 = c1min; c1 <= c1max; c1++)
- for (c0 = c0min; c0 <= c0max; c0++) {
- histp = & histogram[c0][c1][c2min];
- for (c2 = c2min; c2 <= c2max; c2++)
- if (*histp++ != 0) {
- boxp->c1min = c1min = c1;
- goto have_c1min;
- }
- }
- have_c1min:
- if (c1max > c1min)
- for (c1 = c1max; c1 >= c1min; c1--)
- for (c0 = c0min; c0 <= c0max; c0++) {
- histp = & histogram[c0][c1][c2min];
- for (c2 = c2min; c2 <= c2max; c2++)
- if (*histp++ != 0) {
- boxp->c1max = c1max = c1;
- goto have_c1max;
- }
- }
- have_c1max:
- if (c2max > c2min)
- for (c2 = c2min; c2 <= c2max; c2++)
- for (c0 = c0min; c0 <= c0max; c0++) {
- histp = & histogram[c0][c1min][c2];
- for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS)
- if (*histp != 0) {
- boxp->c2min = c2min = c2;
- goto have_c2min;
- }
- }
- have_c2min:
- if (c2max > c2min)
- for (c2 = c2max; c2 >= c2min; c2--)
- for (c0 = c0min; c0 <= c0max; c0++) {
- histp = & histogram[c0][c1min][c2];
- for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS)
- if (*histp != 0) {
- boxp->c2max = c2max = c2;
- goto have_c2max;
- }
- }
- have_c2max:
-
- /* Update box volume.
- * We use 2-norm rather than real volume here; this biases the method
- * against making long narrow boxes, and it has the side benefit that
- * a box is splittable iff norm > 0.
- * Since the differences are expressed in histogram-cell units,
- * we have to shift back to JSAMPLE units to get consistent distances;
- * after which, we scale according to the selected distance scale factors.
- */
- dist0 = ((c0max - c0min) << C0_SHIFT) * C0_SCALE;
- dist1 = ((c1max - c1min) << C1_SHIFT) * C1_SCALE;
- dist2 = ((c2max - c2min) << C2_SHIFT) * C2_SCALE;
- boxp->volume = dist0*dist0 + dist1*dist1 + dist2*dist2;
-
- /* Now scan remaining volume of box and compute population */
- ccount = 0;
- for (c0 = c0min; c0 <= c0max; c0++)
- for (c1 = c1min; c1 <= c1max; c1++) {
- histp = & histogram[c0][c1][c2min];
- for (c2 = c2min; c2 <= c2max; c2++, histp++)
- if (*histp != 0) {
- ccount++;
- }
- }
- boxp->colorcount = ccount;
-}
-
-
-LOCAL(int)
-median_cut (j_decompress_ptr cinfo, boxptr boxlist, int numboxes,
- int desired_colors)
-/* Repeatedly select and split the largest box until we have enough boxes */
-{
- int n,lb;
- int c0,c1,c2,cmax;
- register boxptr b1,b2;
-
- while (numboxes < desired_colors) {
- /* Select box to split.
- * Current algorithm: by population for first half, then by volume.
- */
- if (numboxes*2 <= desired_colors) {
- b1 = find_biggest_color_pop(boxlist, numboxes);
- } else {
- b1 = find_biggest_volume(boxlist, numboxes);
- }
- if (b1 == NULL) /* no splittable boxes left! */
- break;
- b2 = &boxlist[numboxes]; /* where new box will go */
- /* Copy the color bounds to the new box. */
- b2->c0max = b1->c0max; b2->c1max = b1->c1max; b2->c2max = b1->c2max;
- b2->c0min = b1->c0min; b2->c1min = b1->c1min; b2->c2min = b1->c2min;
- /* Choose which axis to split the box on.
- * Current algorithm: longest scaled axis.
- * See notes in update_box about scaling distances.
- */
- c0 = ((b1->c0max - b1->c0min) << C0_SHIFT) * C0_SCALE;
- c1 = ((b1->c1max - b1->c1min) << C1_SHIFT) * C1_SCALE;
- c2 = ((b1->c2max - b1->c2min) << C2_SHIFT) * C2_SCALE;
- /* We want to break any ties in favor of green, then red, blue last.
- * This code does the right thing for R,G,B or B,G,R color orders only.
- */
-#if RGB_RED == 0
- cmax = c1; n = 1;
- if (c0 > cmax) { cmax = c0; n = 0; }
- if (c2 > cmax) { n = 2; }
-#else
- cmax = c1; n = 1;
- if (c2 > cmax) { cmax = c2; n = 2; }
- if (c0 > cmax) { n = 0; }
-#endif
- /* Choose split point along selected axis, and update box bounds.
- * Current algorithm: split at halfway point.
- * (Since the box has been shrunk to minimum volume,
- * any split will produce two nonempty subboxes.)
- * Note that lb value is max for lower box, so must be < old max.
- */
- switch (n) {
- case 0:
- lb = (b1->c0max + b1->c0min) / 2;
- b1->c0max = lb;
- b2->c0min = lb+1;
- break;
- case 1:
- lb = (b1->c1max + b1->c1min) / 2;
- b1->c1max = lb;
- b2->c1min = lb+1;
- break;
- case 2:
- lb = (b1->c2max + b1->c2min) / 2;
- b1->c2max = lb;
- b2->c2min = lb+1;
- break;
- }
- /* Update stats for boxes */
- update_box(cinfo, b1);
- update_box(cinfo, b2);
- numboxes++;
- }
- return numboxes;
-}
-
-
-LOCAL(void)
-compute_color (j_decompress_ptr cinfo, boxptr boxp, int icolor)
-/* Compute representative color for a box, put it in colormap[icolor] */
-{
- /* Current algorithm: mean weighted by pixels (not colors) */
- /* Note it is important to get the rounding correct! */
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- hist3d histogram = cquantize->histogram;
- histptr histp;
- int c0,c1,c2;
- int c0min,c0max,c1min,c1max,c2min,c2max;
- long count;
- long total = 0;
- long c0total = 0;
- long c1total = 0;
- long c2total = 0;
-
- c0min = boxp->c0min; c0max = boxp->c0max;
- c1min = boxp->c1min; c1max = boxp->c1max;
- c2min = boxp->c2min; c2max = boxp->c2max;
-
- for (c0 = c0min; c0 <= c0max; c0++)
- for (c1 = c1min; c1 <= c1max; c1++) {
- histp = & histogram[c0][c1][c2min];
- for (c2 = c2min; c2 <= c2max; c2++) {
- if ((count = *histp++) != 0) {
- total += count;
- c0total += ((c0 << C0_SHIFT) + ((1<<C0_SHIFT)>>1)) * count;
- c1total += ((c1 << C1_SHIFT) + ((1<<C1_SHIFT)>>1)) * count;
- c2total += ((c2 << C2_SHIFT) + ((1<<C2_SHIFT)>>1)) * count;
- }
- }
- }
-
- cinfo->colormap[0][icolor] = (JSAMPLE) ((c0total + (total>>1)) / total);
- cinfo->colormap[1][icolor] = (JSAMPLE) ((c1total + (total>>1)) / total);
- cinfo->colormap[2][icolor] = (JSAMPLE) ((c2total + (total>>1)) / total);
-}
-
-
-LOCAL(void)
-select_colors (j_decompress_ptr cinfo, int desired_colors)
-/* Master routine for color selection */
-{
- boxptr boxlist;
- int numboxes;
- int i;
-
- /* Allocate workspace for box list */
- boxlist = (boxptr) (*cinfo->mem->alloc_small)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, desired_colors * SIZEOF(box));
- /* Initialize one box containing whole space */
- numboxes = 1;
- boxlist[0].c0min = 0;
- boxlist[0].c0max = MAXJSAMPLE >> C0_SHIFT;
- boxlist[0].c1min = 0;
- boxlist[0].c1max = MAXJSAMPLE >> C1_SHIFT;
- boxlist[0].c2min = 0;
- boxlist[0].c2max = MAXJSAMPLE >> C2_SHIFT;
- /* Shrink it to actually-used volume and set its statistics */
- update_box(cinfo, & boxlist[0]);
- /* Perform median-cut to produce final box list */
- numboxes = median_cut(cinfo, boxlist, numboxes, desired_colors);
- /* Compute the representative color for each box, fill colormap */
- for (i = 0; i < numboxes; i++)
- compute_color(cinfo, & boxlist[i], i);
- cinfo->actual_number_of_colors = numboxes;
- TRACEMS1(cinfo, 1, JTRC_QUANT_SELECTED, numboxes);
-}
-
-
-/*
- * These routines are concerned with the time-critical task of mapping input
- * colors to the nearest color in the selected colormap.
- *
- * We re-use the histogram space as an "inverse color map", essentially a
- * cache for the results of nearest-color searches. All colors within a
- * histogram cell will be mapped to the same colormap entry, namely the one
- * closest to the cell's center. This may not be quite the closest entry to
- * the actual input color, but it's almost as good. A zero in the cache
- * indicates we haven't found the nearest color for that cell yet; the array
- * is cleared to zeroes before starting the mapping pass. When we find the
- * nearest color for a cell, its colormap index plus one is recorded in the
- * cache for future use. The pass2 scanning routines call fill_inverse_cmap
- * when they need to use an unfilled entry in the cache.
- *
- * Our method of efficiently finding nearest colors is based on the "locally
- * sorted search" idea described by Heckbert and on the incremental distance
- * calculation described by Spencer W. Thomas in chapter III.1 of Graphics
- * Gems II (James Arvo, ed. Academic Press, 1991). Thomas points out that
- * the distances from a given colormap entry to each cell of the histogram can
- * be computed quickly using an incremental method: the differences between
- * distances to adjacent cells themselves differ by a constant. This allows a
- * fairly fast implementation of the "brute force" approach of computing the
- * distance from every colormap entry to every histogram cell. Unfortunately,
- * it needs a work array to hold the best-distance-so-far for each histogram
- * cell (because the inner loop has to be over cells, not colormap entries).
- * The work array elements have to be INT32s, so the work array would need
- * 256Kb at our recommended precision. This is not feasible in DOS machines.
- *
- * To get around these problems, we apply Thomas' method to compute the
- * nearest colors for only the cells within a small subbox of the histogram.
- * The work array need be only as big as the subbox, so the memory usage
- * problem is solved. Furthermore, we need not fill subboxes that are never
- * referenced in pass2; many images use only part of the color gamut, so a
- * fair amount of work is saved. An additional advantage of this
- * approach is that we can apply Heckbert's locality criterion to quickly
- * eliminate colormap entries that are far away from the subbox; typically
- * three-fourths of the colormap entries are rejected by Heckbert's criterion,
- * and we need not compute their distances to individual cells in the subbox.
- * The speed of this approach is heavily influenced by the subbox size: too
- * small means too much overhead, too big loses because Heckbert's criterion
- * can't eliminate as many colormap entries. Empirically the best subbox
- * size seems to be about 1/512th of the histogram (1/8th in each direction).
- *
- * Thomas' article also describes a refined method which is asymptotically
- * faster than the brute-force method, but it is also far more complex and
- * cannot efficiently be applied to small subboxes. It is therefore not
- * useful for programs intended to be portable to DOS machines. On machines
- * with plenty of memory, filling the whole histogram in one shot with Thomas'
- * refined method might be faster than the present code --- but then again,
- * it might not be any faster, and it's certainly more complicated.
- */
-
-
-/* log2(histogram cells in update box) for each axis; this can be adjusted */
-#define BOX_C0_LOG (HIST_C0_BITS-3)
-#define BOX_C1_LOG (HIST_C1_BITS-3)
-#define BOX_C2_LOG (HIST_C2_BITS-3)
-
-#define BOX_C0_ELEMS (1<<BOX_C0_LOG) /* # of hist cells in update box */
-#define BOX_C1_ELEMS (1<<BOX_C1_LOG)
-#define BOX_C2_ELEMS (1<<BOX_C2_LOG)
-
-#define BOX_C0_SHIFT (C0_SHIFT + BOX_C0_LOG)
-#define BOX_C1_SHIFT (C1_SHIFT + BOX_C1_LOG)
-#define BOX_C2_SHIFT (C2_SHIFT + BOX_C2_LOG)
-
-
-/*
- * The next three routines implement inverse colormap filling. They could
- * all be folded into one big routine, but splitting them up this way saves
- * some stack space (the mindist[] and bestdist[] arrays need not coexist)
- * and may allow some compilers to produce better code by registerizing more
- * inner-loop variables.
- */
-
-LOCAL(int)
-find_nearby_colors (j_decompress_ptr cinfo, int minc0, int minc1, int minc2,
- JSAMPLE colorlist[])
-/* Locate the colormap entries close enough to an update box to be candidates
- * for the nearest entry to some cell(s) in the update box. The update box
- * is specified by the center coordinates of its first cell. The number of
- * candidate colormap entries is returned, and their colormap indexes are
- * placed in colorlist[].
- * This routine uses Heckbert's "locally sorted search" criterion to select
- * the colors that need further consideration.
- */
-{
- int numcolors = cinfo->actual_number_of_colors;
- int maxc0, maxc1, maxc2;
- int centerc0, centerc1, centerc2;
- int i, x, ncolors;
- INT32 minmaxdist, min_dist, max_dist, tdist;
- INT32 mindist[MAXNUMCOLORS]; /* min distance to colormap entry i */
-
- /* Compute true coordinates of update box's upper corner and center.
- * Actually we compute the coordinates of the center of the upper-corner
- * histogram cell, which are the upper bounds of the volume we care about.
- * Note that since ">>" rounds down, the "center" values may be closer to
- * min than to max; hence comparisons to them must be "<=", not "<".
- */
- maxc0 = minc0 + ((1 << BOX_C0_SHIFT) - (1 << C0_SHIFT));
- centerc0 = (minc0 + maxc0) >> 1;
- maxc1 = minc1 + ((1 << BOX_C1_SHIFT) - (1 << C1_SHIFT));
- centerc1 = (minc1 + maxc1) >> 1;
- maxc2 = minc2 + ((1 << BOX_C2_SHIFT) - (1 << C2_SHIFT));
- centerc2 = (minc2 + maxc2) >> 1;
-
- /* For each color in colormap, find:
- * 1. its minimum squared-distance to any point in the update box
- * (zero if color is within update box);
- * 2. its maximum squared-distance to any point in the update box.
- * Both of these can be found by considering only the corners of the box.
- * We save the minimum distance for each color in mindist[];
- * only the smallest maximum distance is of interest.
- */
- minmaxdist = 0x7FFFFFFFL;
-
- for (i = 0; i < numcolors; i++) {
- /* We compute the squared-c0-distance term, then add in the other two. */
- x = GETJSAMPLE(cinfo->colormap[0][i]);
- if (x < minc0) {
- tdist = (x - minc0) * C0_SCALE;
- min_dist = tdist*tdist;
- tdist = (x - maxc0) * C0_SCALE;
- max_dist = tdist*tdist;
- } else if (x > maxc0) {
- tdist = (x - maxc0) * C0_SCALE;
- min_dist = tdist*tdist;
- tdist = (x - minc0) * C0_SCALE;
- max_dist = tdist*tdist;
- } else {
- /* within cell range so no contribution to min_dist */
- min_dist = 0;
- if (x <= centerc0) {
- tdist = (x - maxc0) * C0_SCALE;
- max_dist = tdist*tdist;
- } else {
- tdist = (x - minc0) * C0_SCALE;
- max_dist = tdist*tdist;
- }
- }
-
- x = GETJSAMPLE(cinfo->colormap[1][i]);
- if (x < minc1) {
- tdist = (x - minc1) * C1_SCALE;
- min_dist += tdist*tdist;
- tdist = (x - maxc1) * C1_SCALE;
- max_dist += tdist*tdist;
- } else if (x > maxc1) {
- tdist = (x - maxc1) * C1_SCALE;
- min_dist += tdist*tdist;
- tdist = (x - minc1) * C1_SCALE;
- max_dist += tdist*tdist;
- } else {
- /* within cell range so no contribution to min_dist */
- if (x <= centerc1) {
- tdist = (x - maxc1) * C1_SCALE;
- max_dist += tdist*tdist;
- } else {
- tdist = (x - minc1) * C1_SCALE;
- max_dist += tdist*tdist;
- }
- }
-
- x = GETJSAMPLE(cinfo->colormap[2][i]);
- if (x < minc2) {
- tdist = (x - minc2) * C2_SCALE;
- min_dist += tdist*tdist;
- tdist = (x - maxc2) * C2_SCALE;
- max_dist += tdist*tdist;
- } else if (x > maxc2) {
- tdist = (x - maxc2) * C2_SCALE;
- min_dist += tdist*tdist;
- tdist = (x - minc2) * C2_SCALE;
- max_dist += tdist*tdist;
- } else {
- /* within cell range so no contribution to min_dist */
- if (x <= centerc2) {
- tdist = (x - maxc2) * C2_SCALE;
- max_dist += tdist*tdist;
- } else {
- tdist = (x - minc2) * C2_SCALE;
- max_dist += tdist*tdist;
- }
- }
-
- mindist[i] = min_dist; /* save away the results */
- if (max_dist < minmaxdist)
- minmaxdist = max_dist;
- }
-
- /* Now we know that no cell in the update box is more than minmaxdist
- * away from some colormap entry. Therefore, only colors that are
- * within minmaxdist of some part of the box need be considered.
- */
- ncolors = 0;
- for (i = 0; i < numcolors; i++) {
- if (mindist[i] <= minmaxdist)
- colorlist[ncolors++] = (JSAMPLE) i;
- }
- return ncolors;
-}
-
-
-LOCAL(void)
-find_best_colors (j_decompress_ptr cinfo, int minc0, int minc1, int minc2,
- int numcolors, JSAMPLE colorlist[], JSAMPLE bestcolor[])
-/* Find the closest colormap entry for each cell in the update box,
- * given the list of candidate colors prepared by find_nearby_colors.
- * Return the indexes of the closest entries in the bestcolor[] array.
- * This routine uses Thomas' incremental distance calculation method to
- * find the distance from a colormap entry to successive cells in the box.
- */
-{
- int ic0, ic1, ic2;
- int i, icolor;
- register INT32 * bptr; /* pointer into bestdist[] array */
- JSAMPLE * cptr; /* pointer into bestcolor[] array */
- INT32 dist0, dist1; /* initial distance values */
- register INT32 dist2; /* current distance in inner loop */
- INT32 xx0, xx1; /* distance increments */
- register INT32 xx2;
- INT32 inc0, inc1, inc2; /* initial values for increments */
- /* This array holds the distance to the nearest-so-far color for each cell */
- INT32 bestdist[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS];
-
- /* Initialize best-distance for each cell of the update box */
- bptr = bestdist;
- for (i = BOX_C0_ELEMS*BOX_C1_ELEMS*BOX_C2_ELEMS-1; i >= 0; i--)
- *bptr++ = 0x7FFFFFFFL;
-
- /* For each color selected by find_nearby_colors,
- * compute its distance to the center of each cell in the box.
- * If that's less than best-so-far, update best distance and color number.
- */
-
- /* Nominal steps between cell centers ("x" in Thomas article) */
-#define STEP_C0 ((1 << C0_SHIFT) * C0_SCALE)
-#define STEP_C1 ((1 << C1_SHIFT) * C1_SCALE)
-#define STEP_C2 ((1 << C2_SHIFT) * C2_SCALE)
-
- for (i = 0; i < numcolors; i++) {
- icolor = GETJSAMPLE(colorlist[i]);
- /* Compute (square of) distance from minc0/c1/c2 to this color */
- inc0 = (minc0 - GETJSAMPLE(cinfo->colormap[0][icolor])) * C0_SCALE;
- dist0 = inc0*inc0;
- inc1 = (minc1 - GETJSAMPLE(cinfo->colormap[1][icolor])) * C1_SCALE;
- dist0 += inc1*inc1;
- inc2 = (minc2 - GETJSAMPLE(cinfo->colormap[2][icolor])) * C2_SCALE;
- dist0 += inc2*inc2;
- /* Form the initial difference increments */
- inc0 = inc0 * (2 * STEP_C0) + STEP_C0 * STEP_C0;
- inc1 = inc1 * (2 * STEP_C1) + STEP_C1 * STEP_C1;
- inc2 = inc2 * (2 * STEP_C2) + STEP_C2 * STEP_C2;
- /* Now loop over all cells in box, updating distance per Thomas method */
- bptr = bestdist;
- cptr = bestcolor;
- xx0 = inc0;
- for (ic0 = BOX_C0_ELEMS-1; ic0 >= 0; ic0--) {
- dist1 = dist0;
- xx1 = inc1;
- for (ic1 = BOX_C1_ELEMS-1; ic1 >= 0; ic1--) {
- dist2 = dist1;
- xx2 = inc2;
- for (ic2 = BOX_C2_ELEMS-1; ic2 >= 0; ic2--) {
- if (dist2 < *bptr) {
- *bptr = dist2;
- *cptr = (JSAMPLE) icolor;
- }
- dist2 += xx2;
- xx2 += 2 * STEP_C2 * STEP_C2;
- bptr++;
- cptr++;
- }
- dist1 += xx1;
- xx1 += 2 * STEP_C1 * STEP_C1;
- }
- dist0 += xx0;
- xx0 += 2 * STEP_C0 * STEP_C0;
- }
- }
-}
-
-
-LOCAL(void)
-fill_inverse_cmap (j_decompress_ptr cinfo, int c0, int c1, int c2)
-/* Fill the inverse-colormap entries in the update box that contains */
-/* histogram cell c0/c1/c2. (Only that one cell MUST be filled, but */
-/* we can fill as many others as we wish.) */
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- hist3d histogram = cquantize->histogram;
- int minc0, minc1, minc2; /* lower left corner of update box */
- int ic0, ic1, ic2;
- register JSAMPLE * cptr; /* pointer into bestcolor[] array */
- register histptr cachep; /* pointer into main cache array */
- /* This array lists the candidate colormap indexes. */
- JSAMPLE colorlist[MAXNUMCOLORS];
- int numcolors; /* number of candidate colors */
- /* This array holds the actually closest colormap index for each cell. */
- JSAMPLE bestcolor[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS];
-
- /* Convert cell coordinates to update box ID */
- c0 >>= BOX_C0_LOG;
- c1 >>= BOX_C1_LOG;
- c2 >>= BOX_C2_LOG;
-
- /* Compute true coordinates of update box's origin corner.
- * Actually we compute the coordinates of the center of the corner
- * histogram cell, which are the lower bounds of the volume we care about.
- */
- minc0 = (c0 << BOX_C0_SHIFT) + ((1 << C0_SHIFT) >> 1);
- minc1 = (c1 << BOX_C1_SHIFT) + ((1 << C1_SHIFT) >> 1);
- minc2 = (c2 << BOX_C2_SHIFT) + ((1 << C2_SHIFT) >> 1);
-
- /* Determine which colormap entries are close enough to be candidates
- * for the nearest entry to some cell in the update box.
- */
- numcolors = find_nearby_colors(cinfo, minc0, minc1, minc2, colorlist);
-
- /* Determine the actually nearest colors. */
- find_best_colors(cinfo, minc0, minc1, minc2, numcolors, colorlist,
- bestcolor);
-
- /* Save the best color numbers (plus 1) in the main cache array */
- c0 <<= BOX_C0_LOG; /* convert ID back to base cell indexes */
- c1 <<= BOX_C1_LOG;
- c2 <<= BOX_C2_LOG;
- cptr = bestcolor;
- for (ic0 = 0; ic0 < BOX_C0_ELEMS; ic0++) {
- for (ic1 = 0; ic1 < BOX_C1_ELEMS; ic1++) {
- cachep = & histogram[c0+ic0][c1+ic1][c2];
- for (ic2 = 0; ic2 < BOX_C2_ELEMS; ic2++) {
- *cachep++ = (histcell) (GETJSAMPLE(*cptr++) + 1);
- }
- }
- }
-}
-
-
-/*
- * Map some rows of pixels to the output colormapped representation.
- */
-
-METHODDEF(void)
-pass2_no_dither (j_decompress_ptr cinfo,
- JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows)
-/* This version performs no dithering */
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- hist3d histogram = cquantize->histogram;
- register JSAMPROW inptr, outptr;
- register histptr cachep;
- register int c0, c1, c2;
- int row;
- JDIMENSION col;
- JDIMENSION width = cinfo->output_width;
-
- for (row = 0; row < num_rows; row++) {
- inptr = input_buf[row];
- outptr = output_buf[row];
- for (col = width; col > 0; col--) {
- /* get pixel value and index into the cache */
- c0 = GETJSAMPLE(*inptr++) >> C0_SHIFT;
- c1 = GETJSAMPLE(*inptr++) >> C1_SHIFT;
- c2 = GETJSAMPLE(*inptr++) >> C2_SHIFT;
- cachep = & histogram[c0][c1][c2];
- /* If we have not seen this color before, find nearest colormap entry */
- /* and update the cache */
- if (*cachep == 0)
- fill_inverse_cmap(cinfo, c0,c1,c2);
- /* Now emit the colormap index for this cell */
- *outptr++ = (JSAMPLE) (*cachep - 1);
- }
- }
-}
-
-
-METHODDEF(void)
-pass2_fs_dither (j_decompress_ptr cinfo,
- JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows)
-/* This version performs Floyd-Steinberg dithering */
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- hist3d histogram = cquantize->histogram;
- register LOCFSERROR cur0, cur1, cur2; /* current error or pixel value */
- LOCFSERROR belowerr0, belowerr1, belowerr2; /* error for pixel below cur */
- LOCFSERROR bpreverr0, bpreverr1, bpreverr2; /* error for below/prev col */
- register FSERRPTR errorptr; /* => fserrors[] at column before current */
- JSAMPROW inptr; /* => current input pixel */
- JSAMPROW outptr; /* => current output pixel */
- histptr cachep;
- int dir; /* +1 or -1 depending on direction */
- int dir3; /* 3*dir, for advancing inptr & errorptr */
- int row;
- JDIMENSION col;
- JDIMENSION width = cinfo->output_width;
- JSAMPLE *range_limit = cinfo->sample_range_limit;
- int *error_limit = cquantize->error_limiter;
- JSAMPROW colormap0 = cinfo->colormap[0];
- JSAMPROW colormap1 = cinfo->colormap[1];
- JSAMPROW colormap2 = cinfo->colormap[2];
- SHIFT_TEMPS
-
- for (row = 0; row < num_rows; row++) {
- inptr = input_buf[row];
- outptr = output_buf[row];
- if (cquantize->on_odd_row) {
- /* work right to left in this row */
- inptr += (width-1) * 3; /* so point to rightmost pixel */
- outptr += width-1;
- dir = -1;
- dir3 = -3;
- errorptr = cquantize->fserrors + (width+1)*3; /* => entry after last column */
- cquantize->on_odd_row = FALSE; /* flip for next time */
- } else {
- /* work left to right in this row */
- dir = 1;
- dir3 = 3;
- errorptr = cquantize->fserrors; /* => entry before first real column */
- cquantize->on_odd_row = TRUE; /* flip for next time */
- }
- /* Preset error values: no error propagated to first pixel from left */
- cur0 = cur1 = cur2 = 0;
- /* and no error propagated to row below yet */
- belowerr0 = belowerr1 = belowerr2 = 0;
- bpreverr0 = bpreverr1 = bpreverr2 = 0;
-
- for (col = width; col > 0; col--) {
- /* curN holds the error propagated from the previous pixel on the
- * current line. Add the error propagated from the previous line
- * to form the complete error correction term for this pixel, and
- * round the error term (which is expressed * 16) to an integer.
- * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct
- * for either sign of the error value.
- * Note: errorptr points to *previous* column's array entry.
- */
- cur0 = RIGHT_SHIFT(cur0 + errorptr[dir3+0] + 8, 4);
- cur1 = RIGHT_SHIFT(cur1 + errorptr[dir3+1] + 8, 4);
- cur2 = RIGHT_SHIFT(cur2 + errorptr[dir3+2] + 8, 4);
- /* Limit the error using transfer function set by init_error_limit.
- * See comments with init_error_limit for rationale.
- */
- cur0 = error_limit[cur0];
- cur1 = error_limit[cur1];
- cur2 = error_limit[cur2];
- /* Form pixel value + error, and range-limit to 0..MAXJSAMPLE.
- * The maximum error is +- MAXJSAMPLE (or less with error limiting);
- * this sets the required size of the range_limit array.
- */
- cur0 += GETJSAMPLE(inptr[0]);
- cur1 += GETJSAMPLE(inptr[1]);
- cur2 += GETJSAMPLE(inptr[2]);
- cur0 = GETJSAMPLE(range_limit[cur0]);
- cur1 = GETJSAMPLE(range_limit[cur1]);
- cur2 = GETJSAMPLE(range_limit[cur2]);
- /* Index into the cache with adjusted pixel value */
- cachep = & histogram[cur0>>C0_SHIFT][cur1>>C1_SHIFT][cur2>>C2_SHIFT];
- /* If we have not seen this color before, find nearest colormap */
- /* entry and update the cache */
- if (*cachep == 0)
- fill_inverse_cmap(cinfo, cur0>>C0_SHIFT,cur1>>C1_SHIFT,cur2>>C2_SHIFT);
- /* Now emit the colormap index for this cell */
- { register int pixcode = *cachep - 1;
- *outptr = (JSAMPLE) pixcode;
- /* Compute representation error for this pixel */
- cur0 -= GETJSAMPLE(colormap0[pixcode]);
- cur1 -= GETJSAMPLE(colormap1[pixcode]);
- cur2 -= GETJSAMPLE(colormap2[pixcode]);
- }
- /* Compute error fractions to be propagated to adjacent pixels.
- * Add these into the running sums, and simultaneously shift the
- * next-line error sums left by 1 column.
- */
- { register LOCFSERROR bnexterr, delta;
-
- bnexterr = cur0; /* Process component 0 */
- delta = cur0 * 2;
- cur0 += delta; /* form error * 3 */
- errorptr[0] = (FSERROR) (bpreverr0 + cur0);
- cur0 += delta; /* form error * 5 */
- bpreverr0 = belowerr0 + cur0;
- belowerr0 = bnexterr;
- cur0 += delta; /* form error * 7 */
- bnexterr = cur1; /* Process component 1 */
- delta = cur1 * 2;
- cur1 += delta; /* form error * 3 */
- errorptr[1] = (FSERROR) (bpreverr1 + cur1);
- cur1 += delta; /* form error * 5 */
- bpreverr1 = belowerr1 + cur1;
- belowerr1 = bnexterr;
- cur1 += delta; /* form error * 7 */
- bnexterr = cur2; /* Process component 2 */
- delta = cur2 * 2;
- cur2 += delta; /* form error * 3 */
- errorptr[2] = (FSERROR) (bpreverr2 + cur2);
- cur2 += delta; /* form error * 5 */
- bpreverr2 = belowerr2 + cur2;
- belowerr2 = bnexterr;
- cur2 += delta; /* form error * 7 */
- }
- /* At this point curN contains the 7/16 error value to be propagated
- * to the next pixel on the current line, and all the errors for the
- * next line have been shifted over. We are therefore ready to move on.
- */
- inptr += dir3; /* Advance pixel pointers to next column */
- outptr += dir;
- errorptr += dir3; /* advance errorptr to current column */
- }
- /* Post-loop cleanup: we must unload the final error values into the
- * final fserrors[] entry. Note we need not unload belowerrN because
- * it is for the dummy column before or after the actual array.
- */
- errorptr[0] = (FSERROR) bpreverr0; /* unload prev errs into array */
- errorptr[1] = (FSERROR) bpreverr1;
- errorptr[2] = (FSERROR) bpreverr2;
- }
-}
-
-
-/*
- * Initialize the error-limiting transfer function (lookup table).
- * The raw F-S error computation can potentially compute error values of up to
- * +- MAXJSAMPLE. But we want the maximum correction applied to a pixel to be
- * much less, otherwise obviously wrong pixels will be created. (Typical
- * effects include weird fringes at color-area boundaries, isolated bright
- * pixels in a dark area, etc.) The standard advice for avoiding this problem
- * is to ensure that the "corners" of the color cube are allocated as output
- * colors; then repeated errors in the same direction cannot cause cascading
- * error buildup. However, that only prevents the error from getting
- * completely out of hand; Aaron Giles reports that error limiting improves
- * the results even with corner colors allocated.
- * A simple clamping of the error values to about +- MAXJSAMPLE/8 works pretty
- * well, but the smoother transfer function used below is even better. Thanks
- * to Aaron Giles for this idea.
- */
-
-LOCAL(void)
-init_error_limit (j_decompress_ptr cinfo)
-/* Allocate and fill in the error_limiter table */
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- int * table;
- int in, out;
-
- table = (int *) (*cinfo->mem->alloc_small)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE*2+1) * SIZEOF(int));
- table += MAXJSAMPLE; /* so can index -MAXJSAMPLE .. +MAXJSAMPLE */
- cquantize->error_limiter = table;
-
-#define STEPSIZE ((MAXJSAMPLE+1)/16)
- /* Map errors 1:1 up to +- MAXJSAMPLE/16 */
- out = 0;
- for (in = 0; in < STEPSIZE; in++, out++) {
- table[in] = out; table[-in] = -out;
- }
- /* Map errors 1:2 up to +- 3*MAXJSAMPLE/16 */
- for (; in < STEPSIZE*3; in++, out += (in&1) ? 0 : 1) {
- table[in] = out; table[-in] = -out;
- }
- /* Clamp the rest to final out value (which is (MAXJSAMPLE+1)/8) */
- for (; in <= MAXJSAMPLE; in++) {
- table[in] = out; table[-in] = -out;
- }
-#undef STEPSIZE
-}
-
-
-/*
- * Finish up at the end of each pass.
- */
-
-METHODDEF(void)
-finish_pass1 (j_decompress_ptr cinfo)
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
-
- /* Select the representative colors and fill in cinfo->colormap */
- cinfo->colormap = cquantize->sv_colormap;
- select_colors(cinfo, cquantize->desired);
- /* Force next pass to zero the color index table */
- cquantize->needs_zeroed = TRUE;
-}
-
-
-METHODDEF(void)
-finish_pass2 (j_decompress_ptr cinfo)
-{
- /* no work */
-}
-
-
-/*
- * Initialize for each processing pass.
- */
-
-METHODDEF(void)
-start_pass_2_quant (j_decompress_ptr cinfo, boolean is_pre_scan)
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
- hist3d histogram = cquantize->histogram;
- int i;
-
- /* Only F-S dithering or no dithering is supported. */
- /* If user asks for ordered dither, give him F-S. */
- if (cinfo->dither_mode != JDITHER_NONE)
- cinfo->dither_mode = JDITHER_FS;
-
- if (is_pre_scan) {
- /* Set up method pointers */
- cquantize->pub.color_quantize = prescan_quantize;
- cquantize->pub.finish_pass = finish_pass1;
- cquantize->needs_zeroed = TRUE; /* Always zero histogram */
- } else {
- /* Set up method pointers */
- if (cinfo->dither_mode == JDITHER_FS)
- cquantize->pub.color_quantize = pass2_fs_dither;
- else
- cquantize->pub.color_quantize = pass2_no_dither;
- cquantize->pub.finish_pass = finish_pass2;
-
- /* Make sure color count is acceptable */
- i = cinfo->actual_number_of_colors;
- if (i < 1)
- ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 1);
- if (i > MAXNUMCOLORS)
- ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS);
-
- if (cinfo->dither_mode == JDITHER_FS) {
- size_t arraysize = (size_t) ((cinfo->output_width + 2) *
- (3 * SIZEOF(FSERROR)));
- /* Allocate Floyd-Steinberg workspace if we didn't already. */
- if (cquantize->fserrors == NULL)
- cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize);
- /* Initialize the propagated errors to zero. */
- jzero_far((void FAR *) cquantize->fserrors, arraysize);
- /* Make the error-limit table if we didn't already. */
- if (cquantize->error_limiter == NULL)
- init_error_limit(cinfo);
- cquantize->on_odd_row = FALSE;
- }
-
- }
- /* Zero the histogram or inverse color map, if necessary */
- if (cquantize->needs_zeroed) {
- for (i = 0; i < HIST_C0_ELEMS; i++) {
- jzero_far((void FAR *) histogram[i],
- HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell));
- }
- cquantize->needs_zeroed = FALSE;
- }
-}
-
-
-/*
- * Switch to a new external colormap between output passes.
- */
-
-METHODDEF(void)
-new_color_map_2_quant (j_decompress_ptr cinfo)
-{
- my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
-
- /* Reset the inverse color map */
- cquantize->needs_zeroed = TRUE;
-}
-
-
-/*
- * Module initialization routine for 2-pass color quantization.
- */
-
-GLOBAL(void)
-jinit_2pass_quantizer (j_decompress_ptr cinfo)
-{
- my_cquantize_ptr cquantize;
- int i;
-
- cquantize = (my_cquantize_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(my_cquantizer));
- cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize;
- cquantize->pub.start_pass = start_pass_2_quant;
- cquantize->pub.new_color_map = new_color_map_2_quant;
- cquantize->fserrors = NULL; /* flag optional arrays not allocated */
- cquantize->error_limiter = NULL;
-
- /* Make sure jdmaster didn't give me a case I can't handle */
- if (cinfo->out_color_components != 3)
- ERREXIT(cinfo, JERR_NOTIMPL);
-
- /* Allocate the histogram/inverse colormap storage */
- cquantize->histogram = (hist3d) (*cinfo->mem->alloc_small)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, HIST_C0_ELEMS * SIZEOF(hist2d));
- for (i = 0; i < HIST_C0_ELEMS; i++) {
- cquantize->histogram[i] = (hist2d) (*cinfo->mem->alloc_large)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell));
- }
- cquantize->needs_zeroed = TRUE; /* histogram is garbage now */
-
- /* Allocate storage for the completed colormap, if required.
- * We do this now since it is FAR storage and may affect
- * the memory manager's space calculations.
- */
- if (cinfo->enable_2pass_quant) {
- /* Make sure color count is acceptable */
- int desired = cinfo->desired_number_of_colors;
- /* Lower bound on # of colors ... somewhat arbitrary as long as > 0 */
- if (desired < 8)
- ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 8);
- /* Make sure colormap indexes can be represented by JSAMPLEs */
- if (desired > MAXNUMCOLORS)
- ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS);
- cquantize->sv_colormap = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo,JPOOL_IMAGE, (JDIMENSION) desired, (JDIMENSION) 3);
- cquantize->desired = desired;
- } else
- cquantize->sv_colormap = NULL;
-
- /* Only F-S dithering or no dithering is supported. */
- /* If user asks for ordered dither, give him F-S. */
- if (cinfo->dither_mode != JDITHER_NONE)
- cinfo->dither_mode = JDITHER_FS;
-
- /* Allocate Floyd-Steinberg workspace if necessary.
- * This isn't really needed until pass 2, but again it is FAR storage.
- * Although we will cope with a later change in dither_mode,
- * we do not promise to honor max_memory_to_use if dither_mode changes.
- */
- if (cinfo->dither_mode == JDITHER_FS) {
- cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (size_t) ((cinfo->output_width + 2) * (3 * SIZEOF(FSERROR))));
- /* Might as well create the error-limiting table too. */
- init_error_limit(cinfo);
- }
-}
-
-#endif /* QUANT_2PASS_SUPPORTED */
diff --git a/libjpegtwrp/jutils.c b/libjpegtwrp/jutils.c
deleted file mode 100644
index 616ad0511..000000000
--- a/libjpegtwrp/jutils.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * jutils.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains tables and miscellaneous utility routines needed
- * for both compression and decompression.
- * Note we prefix all global names with "j" to minimize conflicts with
- * a surrounding application.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * jpeg_zigzag_order[i] is the zigzag-order position of the i'th element
- * of a DCT block read in natural order (left to right, top to bottom).
- */
-
-#if 0 /* This table is not actually needed in v6a */
-
-const int jpeg_zigzag_order[DCTSIZE2] = {
- 0, 1, 5, 6, 14, 15, 27, 28,
- 2, 4, 7, 13, 16, 26, 29, 42,
- 3, 8, 12, 17, 25, 30, 41, 43,
- 9, 11, 18, 24, 31, 40, 44, 53,
- 10, 19, 23, 32, 39, 45, 52, 54,
- 20, 22, 33, 38, 46, 51, 55, 60,
- 21, 34, 37, 47, 50, 56, 59, 61,
- 35, 36, 48, 49, 57, 58, 62, 63
-};
-
-#endif
-
-/*
- * jpeg_natural_order[i] is the natural-order position of the i'th element
- * of zigzag order.
- *
- * When reading corrupted data, the Huffman decoders could attempt
- * to reference an entry beyond the end of this array (if the decoded
- * zero run length reaches past the end of the block). To prevent
- * wild stores without adding an inner-loop test, we put some extra
- * "63"s after the real entries. This will cause the extra coefficient
- * to be stored in location 63 of the block, not somewhere random.
- * The worst case would be a run-length of 15, which means we need 16
- * fake entries.
- */
-
-const int jpeg_natural_order[DCTSIZE2+16] = {
- 0, 1, 8, 16, 9, 2, 3, 10,
- 17, 24, 32, 25, 18, 11, 4, 5,
- 12, 19, 26, 33, 40, 48, 41, 34,
- 27, 20, 13, 6, 7, 14, 21, 28,
- 35, 42, 49, 56, 57, 50, 43, 36,
- 29, 22, 15, 23, 30, 37, 44, 51,
- 58, 59, 52, 45, 38, 31, 39, 46,
- 53, 60, 61, 54, 47, 55, 62, 63,
- 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */
- 63, 63, 63, 63, 63, 63, 63, 63
-};
-
-
-/*
- * Arithmetic utilities
- */
-
-GLOBAL(long)
-jdiv_round_up (long a, long b)
-/* Compute a/b rounded up to next integer, ie, ceil(a/b) */
-/* Assumes a >= 0, b > 0 */
-{
- return (a + b - 1L) / b;
-}
-
-
-GLOBAL(long)
-jround_up (long a, long b)
-/* Compute a rounded up to next multiple of b, ie, ceil(a/b)*b */
-/* Assumes a >= 0, b > 0 */
-{
- a += b - 1L;
- return a - (a % b);
-}
-
-GLOBAL(long)
-jmin (long a, long b)
-{
- return a < b ? a : b;
-}
-
-
-/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays
- * and coefficient-block arrays. This won't work on 80x86 because the arrays
- * are FAR and we're assuming a small-pointer memory model. However, some
- * DOS compilers provide far-pointer versions of memcpy() and memset() even
- * in the small-model libraries. These will be used if USE_FMEM is defined.
- * Otherwise, the routines below do it the hard way. (The performance cost
- * is not all that great, because these routines aren't very heavily used.)
- */
-
-#ifndef NEED_FAR_POINTERS /* normal case, same as regular macros */
-#define FMEMCOPY(dest,src,size) MEMCOPY(dest,src,size)
-#define FMEMZERO(target,size) MEMZERO(target,size)
-#else /* 80x86 case, define if we can */
-#ifdef USE_FMEM
-#define FMEMCOPY(dest,src,size) _fmemcpy((void FAR *)(dest), (const void FAR *)(src), (size_t)(size))
-#define FMEMZERO(target,size) _fmemset((void FAR *)(target), 0, (size_t)(size))
-#endif
-#endif
-
-
-GLOBAL(void)
-jcopy_sample_rows (JSAMPARRAY input_array, int source_row,
- JSAMPARRAY output_array, int dest_row,
- int num_rows, JDIMENSION num_cols)
-/* Copy some rows of samples from one place to another.
- * num_rows rows are copied from input_array[source_row++]
- * to output_array[dest_row++]; these areas may overlap for duplication.
- * The source and destination arrays must be at least as wide as num_cols.
- */
-{
- register JSAMPROW inptr, outptr;
-#ifdef FMEMCOPY
- register size_t count = (size_t) (num_cols * SIZEOF(JSAMPLE));
-#else
- register JDIMENSION count;
-#endif
- register int row;
-
- input_array += source_row;
- output_array += dest_row;
-
- for (row = num_rows; row > 0; row--) {
- inptr = *input_array++;
- outptr = *output_array++;
-#ifdef FMEMCOPY
- FMEMCOPY(outptr, inptr, count);
-#else
- for (count = num_cols; count > 0; count--)
- *outptr++ = *inptr++; /* needn't bother with GETJSAMPLE() here */
-#endif
- }
-}
-
-
-GLOBAL(void)
-jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row,
- JDIMENSION num_blocks)
-/* Copy a row of coefficient blocks from one place to another. */
-{
-#ifdef FMEMCOPY
- FMEMCOPY(output_row, input_row, num_blocks * (DCTSIZE2 * SIZEOF(JCOEF)));
-#else
- register JCOEFPTR inptr, outptr;
- register long count;
-
- inptr = (JCOEFPTR) input_row;
- outptr = (JCOEFPTR) output_row;
- for (count = (long) num_blocks * DCTSIZE2; count > 0; count--) {
- *outptr++ = *inptr++;
- }
-#endif
-}
-
-
-GLOBAL(void)
-jzero_far (void FAR * target, size_t bytestozero)
-/* Zero out a chunk of FAR memory. */
-/* This might be sample-array data, block-array data, or alloc_large data. */
-{
-#ifdef FMEMZERO
- FMEMZERO(target, bytestozero);
-#else
- register char FAR * ptr = (char FAR *) target;
- register size_t count;
-
- for (count = bytestozero; count > 0; count--) {
- *ptr++ = 0;
- }
-#endif
-}
diff --git a/libjpegtwrp/jversion.h b/libjpegtwrp/jversion.h
deleted file mode 100644
index 6472c58d3..000000000
--- a/libjpegtwrp/jversion.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * jversion.h
- *
- * Copyright (C) 1991-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains software version identification.
- */
-
-
-#define JVERSION "6b 27-Mar-1998"
-
-#define JCOPYRIGHT "Copyright (C) 1998, Thomas G. Lane"
diff --git a/libjpegtwrp/libjpeg.doc b/libjpegtwrp/libjpeg.doc
deleted file mode 100644
index 689b206c0..000000000
--- a/libjpegtwrp/libjpeg.doc
+++ /dev/null
@@ -1,3006 +0,0 @@
-USING THE IJG JPEG LIBRARY
-
-Copyright (C) 1994-1998, Thomas G. Lane.
-This file is part of the Independent JPEG Group's software.
-For conditions of distribution and use, see the accompanying README file.
-
-
-This file describes how to use the IJG JPEG library within an application
-program. Read it if you want to write a program that uses the library.
-
-The file example.c provides heavily commented skeleton code for calling the
-JPEG library. Also see jpeglib.h (the include file to be used by application
-programs) for full details about data structures and function parameter lists.
-The library source code, of course, is the ultimate reference.
-
-Note that there have been *major* changes from the application interface
-presented by IJG version 4 and earlier versions. The old design had several
-inherent limitations, and it had accumulated a lot of cruft as we added
-features while trying to minimize application-interface changes. We have
-sacrificed backward compatibility in the version 5 rewrite, but we think the
-improvements justify this.
-
-
-TABLE OF CONTENTS
------------------
-
-Overview:
- Functions provided by the library
- Outline of typical usage
-Basic library usage:
- Data formats
- Compression details
- Decompression details
- Mechanics of usage: include files, linking, etc
-Advanced features:
- Compression parameter selection
- Decompression parameter selection
- Special color spaces
- Error handling
- Compressed data handling (source and destination managers)
- I/O suspension
- Progressive JPEG support
- Buffered-image mode
- Abbreviated datastreams and multiple images
- Special markers
- Raw (downsampled) image data
- Really raw data: DCT coefficients
- Progress monitoring
- Memory management
- Memory usage
- Library compile-time options
- Portability considerations
- Notes for MS-DOS implementors
-
-You should read at least the overview and basic usage sections before trying
-to program with the library. The sections on advanced features can be read
-if and when you need them.
-
-
-OVERVIEW
-========
-
-Functions provided by the library
----------------------------------
-
-The IJG JPEG library provides C code to read and write JPEG-compressed image
-files. The surrounding application program receives or supplies image data a
-scanline at a time, using a straightforward uncompressed image format. All
-details of color conversion and other preprocessing/postprocessing can be
-handled by the library.
-
-The library includes a substantial amount of code that is not covered by the
-JPEG standard but is necessary for typical applications of JPEG. These
-functions preprocess the image before JPEG compression or postprocess it after
-decompression. They include colorspace conversion, downsampling/upsampling,
-and color quantization. The application indirectly selects use of this code
-by specifying the format in which it wishes to supply or receive image data.
-For example, if colormapped output is requested, then the decompression
-library automatically invokes color quantization.
-
-A wide range of quality vs. speed tradeoffs are possible in JPEG processing,
-and even more so in decompression postprocessing. The decompression library
-provides multiple implementations that cover most of the useful tradeoffs,
-ranging from very-high-quality down to fast-preview operation. On the
-compression side we have generally not provided low-quality choices, since
-compression is normally less time-critical. It should be understood that the
-low-quality modes may not meet the JPEG standard's accuracy requirements;
-nonetheless, they are useful for viewers.
-
-A word about functions *not* provided by the library. We handle a subset of
-the ISO JPEG standard; most baseline, extended-sequential, and progressive
-JPEG processes are supported. (Our subset includes all features now in common
-use.) Unsupported ISO options include:
- * Hierarchical storage
- * Lossless JPEG
- * Arithmetic entropy coding (unsupported for legal reasons)
- * DNL marker
- * Nonintegral subsampling ratios
-We support both 8- and 12-bit data precision, but this is a compile-time
-choice rather than a run-time choice; hence it is difficult to use both
-precisions in a single application.
-
-By itself, the library handles only interchange JPEG datastreams --- in
-particular the widely used JFIF file format. The library can be used by
-surrounding code to process interchange or abbreviated JPEG datastreams that
-are embedded in more complex file formats. (For example, this library is
-used by the free LIBTIFF library to support JPEG compression in TIFF.)
-
-
-Outline of typical usage
-------------------------
-
-The rough outline of a JPEG compression operation is:
-
- Allocate and initialize a JPEG compression object
- Specify the destination for the compressed data (eg, a file)
- Set parameters for compression, including image size & colorspace
- jpeg_start_compress(...);
- while (scan lines remain to be written)
- jpeg_write_scanlines(...);
- jpeg_finish_compress(...);
- Release the JPEG compression object
-
-A JPEG compression object holds parameters and working state for the JPEG
-library. We make creation/destruction of the object separate from starting
-or finishing compression of an image; the same object can be re-used for a
-series of image compression operations. This makes it easy to re-use the
-same parameter settings for a sequence of images. Re-use of a JPEG object
-also has important implications for processing abbreviated JPEG datastreams,
-as discussed later.
-
-The image data to be compressed is supplied to jpeg_write_scanlines() from
-in-memory buffers. If the application is doing file-to-file compression,
-reading image data from the source file is the application's responsibility.
-The library emits compressed data by calling a "data destination manager",
-which typically will write the data into a file; but the application can
-provide its own destination manager to do something else.
-
-Similarly, the rough outline of a JPEG decompression operation is:
-
- Allocate and initialize a JPEG decompression object
- Specify the source of the compressed data (eg, a file)
- Call jpeg_read_header() to obtain image info
- Set parameters for decompression
- jpeg_start_decompress(...);
- while (scan lines remain to be read)
- jpeg_read_scanlines(...);
- jpeg_finish_decompress(...);
- Release the JPEG decompression object
-
-This is comparable to the compression outline except that reading the
-datastream header is a separate step. This is helpful because information
-about the image's size, colorspace, etc is available when the application
-selects decompression parameters. For example, the application can choose an
-output scaling ratio that will fit the image into the available screen size.
-
-The decompression library obtains compressed data by calling a data source
-manager, which typically will read the data from a file; but other behaviors
-can be obtained with a custom source manager. Decompressed data is delivered
-into in-memory buffers passed to jpeg_read_scanlines().
-
-It is possible to abort an incomplete compression or decompression operation
-by calling jpeg_abort(); or, if you do not need to retain the JPEG object,
-simply release it by calling jpeg_destroy().
-
-JPEG compression and decompression objects are two separate struct types.
-However, they share some common fields, and certain routines such as
-jpeg_destroy() can work on either type of object.
-
-The JPEG library has no static variables: all state is in the compression
-or decompression object. Therefore it is possible to process multiple
-compression and decompression operations concurrently, using multiple JPEG
-objects.
-
-Both compression and decompression can be done in an incremental memory-to-
-memory fashion, if suitable source/destination managers are used. See the
-section on "I/O suspension" for more details.
-
-
-BASIC LIBRARY USAGE
-===================
-
-Data formats
-------------
-
-Before diving into procedural details, it is helpful to understand the
-image data format that the JPEG library expects or returns.
-
-The standard input image format is a rectangular array of pixels, with each
-pixel having the same number of "component" or "sample" values (color
-channels). You must specify how many components there are and the colorspace
-interpretation of the components. Most applications will use RGB data
-(three components per pixel) or grayscale data (one component per pixel).
-PLEASE NOTE THAT RGB DATA IS THREE SAMPLES PER PIXEL, GRAYSCALE ONLY ONE.
-A remarkable number of people manage to miss this, only to find that their
-programs don't work with grayscale JPEG files.
-
-There is no provision for colormapped input. JPEG files are always full-color
-or full grayscale (or sometimes another colorspace such as CMYK). You can
-feed in a colormapped image by expanding it to full-color format. However
-JPEG often doesn't work very well with source data that has been colormapped,
-because of dithering noise. This is discussed in more detail in the JPEG FAQ
-and the other references mentioned in the README file.
-
-Pixels are stored by scanlines, with each scanline running from left to
-right. The component values for each pixel are adjacent in the row; for
-example, R,G,B,R,G,B,R,G,B,... for 24-bit RGB color. Each scanline is an
-array of data type JSAMPLE --- which is typically "unsigned char", unless
-you've changed jmorecfg.h. (You can also change the RGB pixel layout, say
-to B,G,R order, by modifying jmorecfg.h. But see the restrictions listed in
-that file before doing so.)
-
-A 2-D array of pixels is formed by making a list of pointers to the starts of
-scanlines; so the scanlines need not be physically adjacent in memory. Even
-if you process just one scanline at a time, you must make a one-element
-pointer array to conform to this structure. Pointers to JSAMPLE rows are of
-type JSAMPROW, and the pointer to the pointer array is of type JSAMPARRAY.
-
-The library accepts or supplies one or more complete scanlines per call.
-It is not possible to process part of a row at a time. Scanlines are always
-processed top-to-bottom. You can process an entire image in one call if you
-have it all in memory, but usually it's simplest to process one scanline at
-a time.
-
-For best results, source data values should have the precision specified by
-BITS_IN_JSAMPLE (normally 8 bits). For instance, if you choose to compress
-data that's only 6 bits/channel, you should left-justify each value in a
-byte before passing it to the compressor. If you need to compress data
-that has more than 8 bits/channel, compile with BITS_IN_JSAMPLE = 12.
-(See "Library compile-time options", later.)
-
-
-The data format returned by the decompressor is the same in all details,
-except that colormapped output is supported. (Again, a JPEG file is never
-colormapped. But you can ask the decompressor to perform on-the-fly color
-quantization to deliver colormapped output.) If you request colormapped
-output then the returned data array contains a single JSAMPLE per pixel;
-its value is an index into a color map. The color map is represented as
-a 2-D JSAMPARRAY in which each row holds the values of one color component,
-that is, colormap[i][j] is the value of the i'th color component for pixel
-value (map index) j. Note that since the colormap indexes are stored in
-JSAMPLEs, the maximum number of colors is limited by the size of JSAMPLE
-(ie, at most 256 colors for an 8-bit JPEG library).
-
-
-Compression details
--------------------
-
-Here we revisit the JPEG compression outline given in the overview.
-
-1. Allocate and initialize a JPEG compression object.
-
-A JPEG compression object is a "struct jpeg_compress_struct". (It also has
-a bunch of subsidiary structures which are allocated via malloc(), but the
-application doesn't control those directly.) This struct can be just a local
-variable in the calling routine, if a single routine is going to execute the
-whole JPEG compression sequence. Otherwise it can be static or allocated
-from malloc().
-
-You will also need a structure representing a JPEG error handler. The part
-of this that the library cares about is a "struct jpeg_error_mgr". If you
-are providing your own error handler, you'll typically want to embed the
-jpeg_error_mgr struct in a larger structure; this is discussed later under
-"Error handling". For now we'll assume you are just using the default error
-handler. The default error handler will print JPEG error/warning messages
-on stderr, and it will call exit() if a fatal error occurs.
-
-You must initialize the error handler structure, store a pointer to it into
-the JPEG object's "err" field, and then call jpeg_create_compress() to
-initialize the rest of the JPEG object.
-
-Typical code for this step, if you are using the default error handler, is
-
- struct jpeg_compress_struct cinfo;
- struct jpeg_error_mgr jerr;
- ...
- cinfo.err = jpeg_std_error(&jerr);
- jpeg_create_compress(&cinfo);
-
-jpeg_create_compress allocates a small amount of memory, so it could fail
-if you are out of memory. In that case it will exit via the error handler;
-that's why the error handler must be initialized first.
-
-
-2. Specify the destination for the compressed data (eg, a file).
-
-As previously mentioned, the JPEG library delivers compressed data to a
-"data destination" module. The library includes one data destination
-module which knows how to write to a stdio stream. You can use your own
-destination module if you want to do something else, as discussed later.
-
-If you use the standard destination module, you must open the target stdio
-stream beforehand. Typical code for this step looks like:
-
- FILE * outfile;
- ...
- if ((outfile = fopen(filename, "wb")) == NULL) {
- fprintf(stderr, "can't open %s\n", filename);
- exit(1);
- }
- jpeg_stdio_dest(&cinfo, outfile);
-
-where the last line invokes the standard destination module.
-
-WARNING: it is critical that the binary compressed data be delivered to the
-output file unchanged. On non-Unix systems the stdio library may perform
-newline translation or otherwise corrupt binary data. To suppress this
-behavior, you may need to use a "b" option to fopen (as shown above), or use
-setmode() or another routine to put the stdio stream in binary mode. See
-cjpeg.c and djpeg.c for code that has been found to work on many systems.
-
-You can select the data destination after setting other parameters (step 3),
-if that's more convenient. You may not change the destination between
-calling jpeg_start_compress() and jpeg_finish_compress().
-
-
-3. Set parameters for compression, including image size & colorspace.
-
-You must supply information about the source image by setting the following
-fields in the JPEG object (cinfo structure):
-
- image_width Width of image, in pixels
- image_height Height of image, in pixels
- input_components Number of color channels (samples per pixel)
- in_color_space Color space of source image
-
-The image dimensions are, hopefully, obvious. JPEG supports image dimensions
-of 1 to 64K pixels in either direction. The input color space is typically
-RGB or grayscale, and input_components is 3 or 1 accordingly. (See "Special
-color spaces", later, for more info.) The in_color_space field must be
-assigned one of the J_COLOR_SPACE enum constants, typically JCS_RGB or
-JCS_GRAYSCALE.
-
-JPEG has a large number of compression parameters that determine how the
-image is encoded. Most applications don't need or want to know about all
-these parameters. You can set all the parameters to reasonable defaults by
-calling jpeg_set_defaults(); then, if there are particular values you want
-to change, you can do so after that. The "Compression parameter selection"
-section tells about all the parameters.
-
-You must set in_color_space correctly before calling jpeg_set_defaults(),
-because the defaults depend on the source image colorspace. However the
-other three source image parameters need not be valid until you call
-jpeg_start_compress(). There's no harm in calling jpeg_set_defaults() more
-than once, if that happens to be convenient.
-
-Typical code for a 24-bit RGB source image is
-
- cinfo.image_width = Width; /* image width and height, in pixels */
- cinfo.image_height = Height;
- cinfo.input_components = 3; /* # of color components per pixel */
- cinfo.in_color_space = JCS_RGB; /* colorspace of input image */
-
- jpeg_set_defaults(&cinfo);
- /* Make optional parameter settings here */
-
-
-4. jpeg_start_compress(...);
-
-After you have established the data destination and set all the necessary
-source image info and other parameters, call jpeg_start_compress() to begin
-a compression cycle. This will initialize internal state, allocate working
-storage, and emit the first few bytes of the JPEG datastream header.
-
-Typical code:
-
- jpeg_start_compress(&cinfo, TRUE);
-
-The "TRUE" parameter ensures that a complete JPEG interchange datastream
-will be written. This is appropriate in most cases. If you think you might
-want to use an abbreviated datastream, read the section on abbreviated
-datastreams, below.
-
-Once you have called jpeg_start_compress(), you may not alter any JPEG
-parameters or other fields of the JPEG object until you have completed
-the compression cycle.
-
-
-5. while (scan lines remain to be written)
- jpeg_write_scanlines(...);
-
-Now write all the required image data by calling jpeg_write_scanlines()
-one or more times. You can pass one or more scanlines in each call, up
-to the total image height. In most applications it is convenient to pass
-just one or a few scanlines at a time. The expected format for the passed
-data is discussed under "Data formats", above.
-
-Image data should be written in top-to-bottom scanline order. The JPEG spec
-contains some weasel wording about how top and bottom are application-defined
-terms (a curious interpretation of the English language...) but if you want
-your files to be compatible with everyone else's, you WILL use top-to-bottom
-order. If the source data must be read in bottom-to-top order, you can use
-the JPEG library's virtual array mechanism to invert the data efficiently.
-Examples of this can be found in the sample application cjpeg.
-
-The library maintains a count of the number of scanlines written so far
-in the next_scanline field of the JPEG object. Usually you can just use
-this variable as the loop counter, so that the loop test looks like
-"while (cinfo.next_scanline < cinfo.image_height)".
-
-Code for this step depends heavily on the way that you store the source data.
-example.c shows the following code for the case of a full-size 2-D source
-array containing 3-byte RGB pixels:
-
- JSAMPROW row_pointer[1]; /* pointer to a single row */
- int row_stride; /* physical row width in buffer */
-
- row_stride = image_width * 3; /* JSAMPLEs per row in image_buffer */
-
- while (cinfo.next_scanline < cinfo.image_height) {
- row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride];
- jpeg_write_scanlines(&cinfo, row_pointer, 1);
- }
-
-jpeg_write_scanlines() returns the number of scanlines actually written.
-This will normally be equal to the number passed in, so you can usually
-ignore the return value. It is different in just two cases:
- * If you try to write more scanlines than the declared image height,
- the additional scanlines are ignored.
- * If you use a suspending data destination manager, output buffer overrun
- will cause the compressor to return before accepting all the passed lines.
- This feature is discussed under "I/O suspension", below. The normal
- stdio destination manager will NOT cause this to happen.
-In any case, the return value is the same as the change in the value of
-next_scanline.
-
-
-6. jpeg_finish_compress(...);
-
-After all the image data has been written, call jpeg_finish_compress() to
-complete the compression cycle. This step is ESSENTIAL to ensure that the
-last bufferload of data is written to the data destination.
-jpeg_finish_compress() also releases working memory associated with the JPEG
-object.
-
-Typical code:
-
- jpeg_finish_compress(&cinfo);
-
-If using the stdio destination manager, don't forget to close the output
-stdio stream (if necessary) afterwards.
-
-If you have requested a multi-pass operating mode, such as Huffman code
-optimization, jpeg_finish_compress() will perform the additional passes using
-data buffered by the first pass. In this case jpeg_finish_compress() may take
-quite a while to complete. With the default compression parameters, this will
-not happen.
-
-It is an error to call jpeg_finish_compress() before writing the necessary
-total number of scanlines. If you wish to abort compression, call
-jpeg_abort() as discussed below.
-
-After completing a compression cycle, you may dispose of the JPEG object
-as discussed next, or you may use it to compress another image. In that case
-return to step 2, 3, or 4 as appropriate. If you do not change the
-destination manager, the new datastream will be written to the same target.
-If you do not change any JPEG parameters, the new datastream will be written
-with the same parameters as before. Note that you can change the input image
-dimensions freely between cycles, but if you change the input colorspace, you
-should call jpeg_set_defaults() to adjust for the new colorspace; and then
-you'll need to repeat all of step 3.
-
-
-7. Release the JPEG compression object.
-
-When you are done with a JPEG compression object, destroy it by calling
-jpeg_destroy_compress(). This will free all subsidiary memory (regardless of
-the previous state of the object). Or you can call jpeg_destroy(), which
-works for either compression or decompression objects --- this may be more
-convenient if you are sharing code between compression and decompression
-cases. (Actually, these routines are equivalent except for the declared type
-of the passed pointer. To avoid gripes from ANSI C compilers, jpeg_destroy()
-should be passed a j_common_ptr.)
-
-If you allocated the jpeg_compress_struct structure from malloc(), freeing
-it is your responsibility --- jpeg_destroy() won't. Ditto for the error
-handler structure.
-
-Typical code:
-
- jpeg_destroy_compress(&cinfo);
-
-
-8. Aborting.
-
-If you decide to abort a compression cycle before finishing, you can clean up
-in either of two ways:
-
-* If you don't need the JPEG object any more, just call
- jpeg_destroy_compress() or jpeg_destroy() to release memory. This is
- legitimate at any point after calling jpeg_create_compress() --- in fact,
- it's safe even if jpeg_create_compress() fails.
-
-* If you want to re-use the JPEG object, call jpeg_abort_compress(), or call
- jpeg_abort() which works on both compression and decompression objects.
- This will return the object to an idle state, releasing any working memory.
- jpeg_abort() is allowed at any time after successful object creation.
-
-Note that cleaning up the data destination, if required, is your
-responsibility; neither of these routines will call term_destination().
-(See "Compressed data handling", below, for more about that.)
-
-jpeg_destroy() and jpeg_abort() are the only safe calls to make on a JPEG
-object that has reported an error by calling error_exit (see "Error handling"
-for more info). The internal state of such an object is likely to be out of
-whack. Either of these two routines will return the object to a known state.
-
-
-Decompression details
----------------------
-
-Here we revisit the JPEG decompression outline given in the overview.
-
-1. Allocate and initialize a JPEG decompression object.
-
-This is just like initialization for compression, as discussed above,
-except that the object is a "struct jpeg_decompress_struct" and you
-call jpeg_create_decompress(). Error handling is exactly the same.
-
-Typical code:
-
- struct jpeg_decompress_struct cinfo;
- struct jpeg_error_mgr jerr;
- ...
- cinfo.err = jpeg_std_error(&jerr);
- jpeg_create_decompress(&cinfo);
-
-(Both here and in the IJG code, we usually use variable name "cinfo" for
-both compression and decompression objects.)
-
-
-2. Specify the source of the compressed data (eg, a file).
-
-As previously mentioned, the JPEG library reads compressed data from a "data
-source" module. The library includes one data source module which knows how
-to read from a stdio stream. You can use your own source module if you want
-to do something else, as discussed later.
-
-If you use the standard source module, you must open the source stdio stream
-beforehand. Typical code for this step looks like:
-
- FILE * infile;
- ...
- if ((infile = fopen(filename, "rb")) == NULL) {
- fprintf(stderr, "can't open %s\n", filename);
- exit(1);
- }
- jpeg_stdio_src(&cinfo, infile);
-
-where the last line invokes the standard source module.
-
-WARNING: it is critical that the binary compressed data be read unchanged.
-On non-Unix systems the stdio library may perform newline translation or
-otherwise corrupt binary data. To suppress this behavior, you may need to use
-a "b" option to fopen (as shown above), or use setmode() or another routine to
-put the stdio stream in binary mode. See cjpeg.c and djpeg.c for code that
-has been found to work on many systems.
-
-You may not change the data source between calling jpeg_read_header() and
-jpeg_finish_decompress(). If you wish to read a series of JPEG images from
-a single source file, you should repeat the jpeg_read_header() to
-jpeg_finish_decompress() sequence without reinitializing either the JPEG
-object or the data source module; this prevents buffered input data from
-being discarded.
-
-
-3. Call jpeg_read_header() to obtain image info.
-
-Typical code for this step is just
-
- jpeg_read_header(&cinfo, TRUE);
-
-This will read the source datastream header markers, up to the beginning
-of the compressed data proper. On return, the image dimensions and other
-info have been stored in the JPEG object. The application may wish to
-consult this information before selecting decompression parameters.
-
-More complex code is necessary if
- * A suspending data source is used --- in that case jpeg_read_header()
- may return before it has read all the header data. See "I/O suspension",
- below. The normal stdio source manager will NOT cause this to happen.
- * Abbreviated JPEG files are to be processed --- see the section on
- abbreviated datastreams. Standard applications that deal only in
- interchange JPEG files need not be concerned with this case either.
-
-It is permissible to stop at this point if you just wanted to find out the
-image dimensions and other header info for a JPEG file. In that case,
-call jpeg_destroy() when you are done with the JPEG object, or call
-jpeg_abort() to return it to an idle state before selecting a new data
-source and reading another header.
-
-
-4. Set parameters for decompression.
-
-jpeg_read_header() sets appropriate default decompression parameters based on
-the properties of the image (in particular, its colorspace). However, you
-may well want to alter these defaults before beginning the decompression.
-For example, the default is to produce full color output from a color file.
-If you want colormapped output you must ask for it. Other options allow the
-returned image to be scaled and allow various speed/quality tradeoffs to be
-selected. "Decompression parameter selection", below, gives details.
-
-If the defaults are appropriate, nothing need be done at this step.
-
-Note that all default values are set by each call to jpeg_read_header().
-If you reuse a decompression object, you cannot expect your parameter
-settings to be preserved across cycles, as you can for compression.
-You must set desired parameter values each time.
-
-
-5. jpeg_start_decompress(...);
-
-Once the parameter values are satisfactory, call jpeg_start_decompress() to
-begin decompression. This will initialize internal state, allocate working
-memory, and prepare for returning data.
-
-Typical code is just
-
- jpeg_start_decompress(&cinfo);
-
-If you have requested a multi-pass operating mode, such as 2-pass color
-quantization, jpeg_start_decompress() will do everything needed before data
-output can begin. In this case jpeg_start_decompress() may take quite a while
-to complete. With a single-scan (non progressive) JPEG file and default
-decompression parameters, this will not happen; jpeg_start_decompress() will
-return quickly.
-
-After this call, the final output image dimensions, including any requested
-scaling, are available in the JPEG object; so is the selected colormap, if
-colormapped output has been requested. Useful fields include
-
- output_width image width and height, as scaled
- output_height
- out_color_components # of color components in out_color_space
- output_components # of color components returned per pixel
- colormap the selected colormap, if any
- actual_number_of_colors number of entries in colormap
-
-output_components is 1 (a colormap index) when quantizing colors; otherwise it
-equals out_color_components. It is the number of JSAMPLE values that will be
-emitted per pixel in the output arrays.
-
-Typically you will need to allocate data buffers to hold the incoming image.
-You will need output_width * output_components JSAMPLEs per scanline in your
-output buffer, and a total of output_height scanlines will be returned.
-
-Note: if you are using the JPEG library's internal memory manager to allocate
-data buffers (as djpeg does), then the manager's protocol requires that you
-request large buffers *before* calling jpeg_start_decompress(). This is a
-little tricky since the output_XXX fields are not normally valid then. You
-can make them valid by calling jpeg_calc_output_dimensions() after setting the
-relevant parameters (scaling, output color space, and quantization flag).
-
-
-6. while (scan lines remain to be read)
- jpeg_read_scanlines(...);
-
-Now you can read the decompressed image data by calling jpeg_read_scanlines()
-one or more times. At each call, you pass in the maximum number of scanlines
-to be read (ie, the height of your working buffer); jpeg_read_scanlines()
-will return up to that many lines. The return value is the number of lines
-actually read. The format of the returned data is discussed under "Data
-formats", above. Don't forget that grayscale and color JPEGs will return
-different data formats!
-
-Image data is returned in top-to-bottom scanline order. If you must write
-out the image in bottom-to-top order, you can use the JPEG library's virtual
-array mechanism to invert the data efficiently. Examples of this can be
-found in the sample application djpeg.
-
-The library maintains a count of the number of scanlines returned so far
-in the output_scanline field of the JPEG object. Usually you can just use
-this variable as the loop counter, so that the loop test looks like
-"while (cinfo.output_scanline < cinfo.output_height)". (Note that the test
-should NOT be against image_height, unless you never use scaling. The
-image_height field is the height of the original unscaled image.)
-The return value always equals the change in the value of output_scanline.
-
-If you don't use a suspending data source, it is safe to assume that
-jpeg_read_scanlines() reads at least one scanline per call, until the
-bottom of the image has been reached.
-
-If you use a buffer larger than one scanline, it is NOT safe to assume that
-jpeg_read_scanlines() fills it. (The current implementation returns only a
-few scanlines per call, no matter how large a buffer you pass.) So you must
-always provide a loop that calls jpeg_read_scanlines() repeatedly until the
-whole image has been read.
-
-
-7. jpeg_finish_decompress(...);
-
-After all the image data has been read, call jpeg_finish_decompress() to
-complete the decompression cycle. This causes working memory associated
-with the JPEG object to be released.
-
-Typical code:
-
- jpeg_finish_decompress(&cinfo);
-
-If using the stdio source manager, don't forget to close the source stdio
-stream if necessary.
-
-It is an error to call jpeg_finish_decompress() before reading the correct
-total number of scanlines. If you wish to abort decompression, call
-jpeg_abort() as discussed below.
-
-After completing a decompression cycle, you may dispose of the JPEG object as
-discussed next, or you may use it to decompress another image. In that case
-return to step 2 or 3 as appropriate. If you do not change the source
-manager, the next image will be read from the same source.
-
-
-8. Release the JPEG decompression object.
-
-When you are done with a JPEG decompression object, destroy it by calling
-jpeg_destroy_decompress() or jpeg_destroy(). The previous discussion of
-destroying compression objects applies here too.
-
-Typical code:
-
- jpeg_destroy_decompress(&cinfo);
-
-
-9. Aborting.
-
-You can abort a decompression cycle by calling jpeg_destroy_decompress() or
-jpeg_destroy() if you don't need the JPEG object any more, or
-jpeg_abort_decompress() or jpeg_abort() if you want to reuse the object.
-The previous discussion of aborting compression cycles applies here too.
-
-
-Mechanics of usage: include files, linking, etc
------------------------------------------------
-
-Applications using the JPEG library should include the header file jpeglib.h
-to obtain declarations of data types and routines. Before including
-jpeglib.h, include system headers that define at least the typedefs FILE and
-size_t. On ANSI-conforming systems, including <stdio.h> is sufficient; on
-older Unix systems, you may need <sys/types.h> to define size_t.
-
-If the application needs to refer to individual JPEG library error codes, also
-include jerror.h to define those symbols.
-
-jpeglib.h indirectly includes the files jconfig.h and jmorecfg.h. If you are
-installing the JPEG header files in a system directory, you will want to
-install all four files: jpeglib.h, jerror.h, jconfig.h, jmorecfg.h.
-
-The most convenient way to include the JPEG code into your executable program
-is to prepare a library file ("libjpeg.a", or a corresponding name on non-Unix
-machines) and reference it at your link step. If you use only half of the
-library (only compression or only decompression), only that much code will be
-included from the library, unless your linker is hopelessly brain-damaged.
-The supplied makefiles build libjpeg.a automatically (see install.doc).
-
-While you can build the JPEG library as a shared library if the whim strikes
-you, we don't really recommend it. The trouble with shared libraries is that
-at some point you'll probably try to substitute a new version of the library
-without recompiling the calling applications. That generally doesn't work
-because the parameter struct declarations usually change with each new
-version. In other words, the library's API is *not* guaranteed binary
-compatible across versions; we only try to ensure source-code compatibility.
-(In hindsight, it might have been smarter to hide the parameter structs from
-applications and introduce a ton of access functions instead. Too late now,
-however.)
-
-On some systems your application may need to set up a signal handler to ensure
-that temporary files are deleted if the program is interrupted. This is most
-critical if you are on MS-DOS and use the jmemdos.c memory manager back end;
-it will try to grab extended memory for temp files, and that space will NOT be
-freed automatically. See cjpeg.c or djpeg.c for an example signal handler.
-
-It may be worth pointing out that the core JPEG library does not actually
-require the stdio library: only the default source/destination managers and
-error handler need it. You can use the library in a stdio-less environment
-if you replace those modules and use jmemnobs.c (or another memory manager of
-your own devising). More info about the minimum system library requirements
-may be found in jinclude.h.
-
-
-ADVANCED FEATURES
-=================
-
-Compression parameter selection
--------------------------------
-
-This section describes all the optional parameters you can set for JPEG
-compression, as well as the "helper" routines provided to assist in this
-task. Proper setting of some parameters requires detailed understanding
-of the JPEG standard; if you don't know what a parameter is for, it's best
-not to mess with it! See REFERENCES in the README file for pointers to
-more info about JPEG.
-
-It's a good idea to call jpeg_set_defaults() first, even if you plan to set
-all the parameters; that way your code is more likely to work with future JPEG
-libraries that have additional parameters. For the same reason, we recommend
-you use a helper routine where one is provided, in preference to twiddling
-cinfo fields directly.
-
-The helper routines are:
-
-jpeg_set_defaults (j_compress_ptr cinfo)
- This routine sets all JPEG parameters to reasonable defaults, using
- only the input image's color space (field in_color_space, which must
- already be set in cinfo). Many applications will only need to use
- this routine and perhaps jpeg_set_quality().
-
-jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace)
- Sets the JPEG file's colorspace (field jpeg_color_space) as specified,
- and sets other color-space-dependent parameters appropriately. See
- "Special color spaces", below, before using this. A large number of
- parameters, including all per-component parameters, are set by this
- routine; if you want to twiddle individual parameters you should call
- jpeg_set_colorspace() before rather than after.
-
-jpeg_default_colorspace (j_compress_ptr cinfo)
- Selects an appropriate JPEG colorspace based on cinfo->in_color_space,
- and calls jpeg_set_colorspace(). This is actually a subroutine of
- jpeg_set_defaults(). It's broken out in case you want to change
- just the colorspace-dependent JPEG parameters.
-
-jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline)
- Constructs JPEG quantization tables appropriate for the indicated
- quality setting. The quality value is expressed on the 0..100 scale
- recommended by IJG (cjpeg's "-quality" switch uses this routine).
- Note that the exact mapping from quality values to tables may change
- in future IJG releases as more is learned about DCT quantization.
- If the force_baseline parameter is TRUE, then the quantization table
- entries are constrained to the range 1..255 for full JPEG baseline
- compatibility. In the current implementation, this only makes a
- difference for quality settings below 25, and it effectively prevents
- very small/low quality files from being generated. The IJG decoder
- is capable of reading the non-baseline files generated at low quality
- settings when force_baseline is FALSE, but other decoders may not be.
-
-jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
- boolean force_baseline)
- Same as jpeg_set_quality() except that the generated tables are the
- sample tables given in the JPEC spec section K.1, multiplied by the
- specified scale factor (which is expressed as a percentage; thus
- scale_factor = 100 reproduces the spec's tables). Note that larger
- scale factors give lower quality. This entry point is useful for
- conforming to the Adobe PostScript DCT conventions, but we do not
- recommend linear scaling as a user-visible quality scale otherwise.
- force_baseline again constrains the computed table entries to 1..255.
-
-int jpeg_quality_scaling (int quality)
- Converts a value on the IJG-recommended quality scale to a linear
- scaling percentage. Note that this routine may change or go away
- in future releases --- IJG may choose to adopt a scaling method that
- can't be expressed as a simple scalar multiplier, in which case the
- premise of this routine collapses. Caveat user.
-
-jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
- const unsigned int *basic_table,
- int scale_factor, boolean force_baseline)
- Allows an arbitrary quantization table to be created. which_tbl
- indicates which table slot to fill. basic_table points to an array
- of 64 unsigned ints given in normal array order. These values are
- multiplied by scale_factor/100 and then clamped to the range 1..65535
- (or to 1..255 if force_baseline is TRUE).
- CAUTION: prior to library version 6a, jpeg_add_quant_table expected
- the basic table to be given in JPEG zigzag order. If you need to
- write code that works with either older or newer versions of this
- routine, you must check the library version number. Something like
- "#if JPEG_LIB_VERSION >= 61" is the right test.
-
-jpeg_simple_progression (j_compress_ptr cinfo)
- Generates a default scan script for writing a progressive-JPEG file.
- This is the recommended method of creating a progressive file,
- unless you want to make a custom scan sequence. You must ensure that
- the JPEG color space is set correctly before calling this routine.
-
-
-Compression parameters (cinfo fields) include:
-
-J_DCT_METHOD dct_method
- Selects the algorithm used for the DCT step. Choices are:
- JDCT_ISLOW: slow but accurate integer algorithm
- JDCT_IFAST: faster, less accurate integer method
- JDCT_FLOAT: floating-point method
- JDCT_DEFAULT: default method (normally JDCT_ISLOW)
- JDCT_FASTEST: fastest method (normally JDCT_IFAST)
- The FLOAT method is very slightly more accurate than the ISLOW method,
- but may give different results on different machines due to varying
- roundoff behavior. The integer methods should give the same results
- on all machines. On machines with sufficiently fast FP hardware, the
- floating-point method may also be the fastest. The IFAST method is
- considerably less accurate than the other two; its use is not
- recommended if high quality is a concern. JDCT_DEFAULT and
- JDCT_FASTEST are macros configurable by each installation.
-
-J_COLOR_SPACE jpeg_color_space
-int num_components
- The JPEG color space and corresponding number of components; see
- "Special color spaces", below, for more info. We recommend using
- jpeg_set_color_space() if you want to change these.
-
-boolean optimize_coding
- TRUE causes the compressor to compute optimal Huffman coding tables
- for the image. This requires an extra pass over the data and
- therefore costs a good deal of space and time. The default is
- FALSE, which tells the compressor to use the supplied or default
- Huffman tables. In most cases optimal tables save only a few percent
- of file size compared to the default tables. Note that when this is
- TRUE, you need not supply Huffman tables at all, and any you do
- supply will be overwritten.
-
-unsigned int restart_interval
-int restart_in_rows
- To emit restart markers in the JPEG file, set one of these nonzero.
- Set restart_interval to specify the exact interval in MCU blocks.
- Set restart_in_rows to specify the interval in MCU rows. (If
- restart_in_rows is not 0, then restart_interval is set after the
- image width in MCUs is computed.) Defaults are zero (no restarts).
- One restart marker per MCU row is often a good choice.
- NOTE: the overhead of restart markers is higher in grayscale JPEG
- files than in color files, and MUCH higher in progressive JPEGs.
- If you use restarts, you may want to use larger intervals in those
- cases.
-
-const jpeg_scan_info * scan_info
-int num_scans
- By default, scan_info is NULL; this causes the compressor to write a
- single-scan sequential JPEG file. If not NULL, scan_info points to
- an array of scan definition records of length num_scans. The
- compressor will then write a JPEG file having one scan for each scan
- definition record. This is used to generate noninterleaved or
- progressive JPEG files. The library checks that the scan array
- defines a valid JPEG scan sequence. (jpeg_simple_progression creates
- a suitable scan definition array for progressive JPEG.) This is
- discussed further under "Progressive JPEG support".
-
-int smoothing_factor
- If non-zero, the input image is smoothed; the value should be 1 for
- minimal smoothing to 100 for maximum smoothing. Consult jcsample.c
- for details of the smoothing algorithm. The default is zero.
-
-boolean write_JFIF_header
- If TRUE, a JFIF APP0 marker is emitted. jpeg_set_defaults() and
- jpeg_set_colorspace() set this TRUE if a JFIF-legal JPEG color space
- (ie, YCbCr or grayscale) is selected, otherwise FALSE.
-
-UINT8 JFIF_major_version
-UINT8 JFIF_minor_version
- The version number to be written into the JFIF marker.
- jpeg_set_defaults() initializes the version to 1.01 (major=minor=1).
- You should set it to 1.02 (major=1, minor=2) if you plan to write
- any JFIF 1.02 extension markers.
-
-UINT8 density_unit
-UINT16 X_density
-UINT16 Y_density
- The resolution information to be written into the JFIF marker;
- not used otherwise. density_unit may be 0 for unknown,
- 1 for dots/inch, or 2 for dots/cm. The default values are 0,1,1
- indicating square pixels of unknown size.
-
-boolean write_Adobe_marker
- If TRUE, an Adobe APP14 marker is emitted. jpeg_set_defaults() and
- jpeg_set_colorspace() set this TRUE if JPEG color space RGB, CMYK,
- or YCCK is selected, otherwise FALSE. It is generally a bad idea
- to set both write_JFIF_header and write_Adobe_marker. In fact,
- you probably shouldn't change the default settings at all --- the
- default behavior ensures that the JPEG file's color space can be
- recognized by the decoder.
-
-JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]
- Pointers to coefficient quantization tables, one per table slot,
- or NULL if no table is defined for a slot. Usually these should
- be set via one of the above helper routines; jpeg_add_quant_table()
- is general enough to define any quantization table. The other
- routines will set up table slot 0 for luminance quality and table
- slot 1 for chrominance.
-
-JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]
-JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]
- Pointers to Huffman coding tables, one per table slot, or NULL if
- no table is defined for a slot. Slots 0 and 1 are filled with the
- JPEG sample tables by jpeg_set_defaults(). If you need to allocate
- more table structures, jpeg_alloc_huff_table() may be used.
- Note that optimal Huffman tables can be computed for an image
- by setting optimize_coding, as discussed above; there's seldom
- any need to mess with providing your own Huffman tables.
-
-There are some additional cinfo fields which are not documented here
-because you currently can't change them; for example, you can't set
-arith_code TRUE because arithmetic coding is unsupported.
-
-
-Per-component parameters are stored in the struct cinfo.comp_info[i] for
-component number i. Note that components here refer to components of the
-JPEG color space, *not* the source image color space. A suitably large
-comp_info[] array is allocated by jpeg_set_defaults(); if you choose not
-to use that routine, it's up to you to allocate the array.
-
-int component_id
- The one-byte identifier code to be recorded in the JPEG file for
- this component. For the standard color spaces, we recommend you
- leave the default values alone.
-
-int h_samp_factor
-int v_samp_factor
- Horizontal and vertical sampling factors for the component; must
- be 1..4 according to the JPEG standard. Note that larger sampling
- factors indicate a higher-resolution component; many people find
- this behavior quite unintuitive. The default values are 2,2 for
- luminance components and 1,1 for chrominance components, except
- for grayscale where 1,1 is used.
-
-int quant_tbl_no
- Quantization table number for component. The default value is
- 0 for luminance components and 1 for chrominance components.
-
-int dc_tbl_no
-int ac_tbl_no
- DC and AC entropy coding table numbers. The default values are
- 0 for luminance components and 1 for chrominance components.
-
-int component_index
- Must equal the component's index in comp_info[]. (Beginning in
- release v6, the compressor library will fill this in automatically;
- you don't have to.)
-
-
-Decompression parameter selection
----------------------------------
-
-Decompression parameter selection is somewhat simpler than compression
-parameter selection, since all of the JPEG internal parameters are
-recorded in the source file and need not be supplied by the application.
-(Unless you are working with abbreviated files, in which case see
-"Abbreviated datastreams", below.) Decompression parameters control
-the postprocessing done on the image to deliver it in a format suitable
-for the application's use. Many of the parameters control speed/quality
-tradeoffs, in which faster decompression may be obtained at the price of
-a poorer-quality image. The defaults select the highest quality (slowest)
-processing.
-
-The following fields in the JPEG object are set by jpeg_read_header() and
-may be useful to the application in choosing decompression parameters:
-
-JDIMENSION image_width Width and height of image
-JDIMENSION image_height
-int num_components Number of color components
-J_COLOR_SPACE jpeg_color_space Colorspace of image
-boolean saw_JFIF_marker TRUE if a JFIF APP0 marker was seen
- UINT8 JFIF_major_version Version information from JFIF marker
- UINT8 JFIF_minor_version
- UINT8 density_unit Resolution data from JFIF marker
- UINT16 X_density
- UINT16 Y_density
-boolean saw_Adobe_marker TRUE if an Adobe APP14 marker was seen
- UINT8 Adobe_transform Color transform code from Adobe marker
-
-The JPEG color space, unfortunately, is something of a guess since the JPEG
-standard proper does not provide a way to record it. In practice most files
-adhere to the JFIF or Adobe conventions, and the decoder will recognize these
-correctly. See "Special color spaces", below, for more info.
-
-
-The decompression parameters that determine the basic properties of the
-returned image are:
-
-J_COLOR_SPACE out_color_space
- Output color space. jpeg_read_header() sets an appropriate default
- based on jpeg_color_space; typically it will be RGB or grayscale.
- The application can change this field to request output in a different
- colorspace. For example, set it to JCS_GRAYSCALE to get grayscale
- output from a color file. (This is useful for previewing: grayscale
- output is faster than full color since the color components need not
- be processed.) Note that not all possible color space transforms are
- currently implemented; you may need to extend jdcolor.c if you want an
- unusual conversion.
-
-unsigned int scale_num, scale_denom
- Scale the image by the fraction scale_num/scale_denom. Default is
- 1/1, or no scaling. Currently, the only supported scaling ratios
- are 1/1, 1/2, 1/4, and 1/8. (The library design allows for arbitrary
- scaling ratios but this is not likely to be implemented any time soon.)
- Smaller scaling ratios permit significantly faster decoding since
- fewer pixels need be processed and a simpler IDCT method can be used.
-
-boolean quantize_colors
- If set TRUE, colormapped output will be delivered. Default is FALSE,
- meaning that full-color output will be delivered.
-
-The next three parameters are relevant only if quantize_colors is TRUE.
-
-int desired_number_of_colors
- Maximum number of colors to use in generating a library-supplied color
- map (the actual number of colors is returned in a different field).
- Default 256. Ignored when the application supplies its own color map.
-
-boolean two_pass_quantize
- If TRUE, an extra pass over the image is made to select a custom color
- map for the image. This usually looks a lot better than the one-size-
- fits-all colormap that is used otherwise. Default is TRUE. Ignored
- when the application supplies its own color map.
-
-J_DITHER_MODE dither_mode
- Selects color dithering method. Supported values are:
- JDITHER_NONE no dithering: fast, very low quality
- JDITHER_ORDERED ordered dither: moderate speed and quality
- JDITHER_FS Floyd-Steinberg dither: slow, high quality
- Default is JDITHER_FS. (At present, ordered dither is implemented
- only in the single-pass, standard-colormap case. If you ask for
- ordered dither when two_pass_quantize is TRUE or when you supply
- an external color map, you'll get F-S dithering.)
-
-When quantize_colors is TRUE, the target color map is described by the next
-two fields. colormap is set to NULL by jpeg_read_header(). The application
-can supply a color map by setting colormap non-NULL and setting
-actual_number_of_colors to the map size. Otherwise, jpeg_start_decompress()
-selects a suitable color map and sets these two fields itself.
-[Implementation restriction: at present, an externally supplied colormap is
-only accepted for 3-component output color spaces.]
-
-JSAMPARRAY colormap
- The color map, represented as a 2-D pixel array of out_color_components
- rows and actual_number_of_colors columns. Ignored if not quantizing.
- CAUTION: if the JPEG library creates its own colormap, the storage
- pointed to by this field is released by jpeg_finish_decompress().
- Copy the colormap somewhere else first, if you want to save it.
-
-int actual_number_of_colors
- The number of colors in the color map.
-
-Additional decompression parameters that the application may set include:
-
-J_DCT_METHOD dct_method
- Selects the algorithm used for the DCT step. Choices are the same
- as described above for compression.
-
-boolean do_fancy_upsampling
- If TRUE, do careful upsampling of chroma components. If FALSE,
- a faster but sloppier method is used. Default is TRUE. The visual
- impact of the sloppier method is often very small.
-
-boolean do_block_smoothing
- If TRUE, interblock smoothing is applied in early stages of decoding
- progressive JPEG files; if FALSE, not. Default is TRUE. Early
- progression stages look "fuzzy" with smoothing, "blocky" without.
- In any case, block smoothing ceases to be applied after the first few
- AC coefficients are known to full accuracy, so it is relevant only
- when using buffered-image mode for progressive images.
-
-boolean enable_1pass_quant
-boolean enable_external_quant
-boolean enable_2pass_quant
- These are significant only in buffered-image mode, which is
- described in its own section below.
-
-
-The output image dimensions are given by the following fields. These are
-computed from the source image dimensions and the decompression parameters
-by jpeg_start_decompress(). You can also call jpeg_calc_output_dimensions()
-to obtain the values that will result from the current parameter settings.
-This can be useful if you are trying to pick a scaling ratio that will get
-close to a desired target size. It's also important if you are using the
-JPEG library's memory manager to allocate output buffer space, because you
-are supposed to request such buffers *before* jpeg_start_decompress().
-
-JDIMENSION output_width Actual dimensions of output image.
-JDIMENSION output_height
-int out_color_components Number of color components in out_color_space.
-int output_components Number of color components returned.
-int rec_outbuf_height Recommended height of scanline buffer.
-
-When quantizing colors, output_components is 1, indicating a single color map
-index per pixel. Otherwise it equals out_color_components. The output arrays
-are required to be output_width * output_components JSAMPLEs wide.
-
-rec_outbuf_height is the recommended minimum height (in scanlines) of the
-buffer passed to jpeg_read_scanlines(). If the buffer is smaller, the
-library will still work, but time will be wasted due to unnecessary data
-copying. In high-quality modes, rec_outbuf_height is always 1, but some
-faster, lower-quality modes set it to larger values (typically 2 to 4).
-If you are going to ask for a high-speed processing mode, you may as well
-go to the trouble of honoring rec_outbuf_height so as to avoid data copying.
-(An output buffer larger than rec_outbuf_height lines is OK, but won't
-provide any material speed improvement over that height.)
-
-
-Special color spaces
---------------------
-
-The JPEG standard itself is "color blind" and doesn't specify any particular
-color space. It is customary to convert color data to a luminance/chrominance
-color space before compressing, since this permits greater compression. The
-existing de-facto JPEG file format standards specify YCbCr or grayscale data
-(JFIF), or grayscale, RGB, YCbCr, CMYK, or YCCK (Adobe). For special
-applications such as multispectral images, other color spaces can be used,
-but it must be understood that such files will be unportable.
-
-The JPEG library can handle the most common colorspace conversions (namely
-RGB <=> YCbCr and CMYK <=> YCCK). It can also deal with data of an unknown
-color space, passing it through without conversion. If you deal extensively
-with an unusual color space, you can easily extend the library to understand
-additional color spaces and perform appropriate conversions.
-
-For compression, the source data's color space is specified by field
-in_color_space. This is transformed to the JPEG file's color space given
-by jpeg_color_space. jpeg_set_defaults() chooses a reasonable JPEG color
-space depending on in_color_space, but you can override this by calling
-jpeg_set_colorspace(). Of course you must select a supported transformation.
-jccolor.c currently supports the following transformations:
- RGB => YCbCr
- RGB => GRAYSCALE
- YCbCr => GRAYSCALE
- CMYK => YCCK
-plus the null transforms: GRAYSCALE => GRAYSCALE, RGB => RGB,
-YCbCr => YCbCr, CMYK => CMYK, YCCK => YCCK, and UNKNOWN => UNKNOWN.
-
-The de-facto file format standards (JFIF and Adobe) specify APPn markers that
-indicate the color space of the JPEG file. It is important to ensure that
-these are written correctly, or omitted if the JPEG file's color space is not
-one of the ones supported by the de-facto standards. jpeg_set_colorspace()
-will set the compression parameters to include or omit the APPn markers
-properly, so long as it is told the truth about the JPEG color space.
-For example, if you are writing some random 3-component color space without
-conversion, don't try to fake out the library by setting in_color_space and
-jpeg_color_space to JCS_YCbCr; use JCS_UNKNOWN. You may want to write an
-APPn marker of your own devising to identify the colorspace --- see "Special
-markers", below.
-
-When told that the color space is UNKNOWN, the library will default to using
-luminance-quality compression parameters for all color components. You may
-well want to change these parameters. See the source code for
-jpeg_set_colorspace(), in jcparam.c, for details.
-
-For decompression, the JPEG file's color space is given in jpeg_color_space,
-and this is transformed to the output color space out_color_space.
-jpeg_read_header's setting of jpeg_color_space can be relied on if the file
-conforms to JFIF or Adobe conventions, but otherwise it is no better than a
-guess. If you know the JPEG file's color space for certain, you can override
-jpeg_read_header's guess by setting jpeg_color_space. jpeg_read_header also
-selects a default output color space based on (its guess of) jpeg_color_space;
-set out_color_space to override this. Again, you must select a supported
-transformation. jdcolor.c currently supports
- YCbCr => GRAYSCALE
- YCbCr => RGB
- GRAYSCALE => RGB
- YCCK => CMYK
-as well as the null transforms. (Since GRAYSCALE=>RGB is provided, an
-application can force grayscale JPEGs to look like color JPEGs if it only
-wants to handle one case.)
-
-The two-pass color quantizer, jquant2.c, is specialized to handle RGB data
-(it weights distances appropriately for RGB colors). You'll need to modify
-the code if you want to use it for non-RGB output color spaces. Note that
-jquant2.c is used to map to an application-supplied colormap as well as for
-the normal two-pass colormap selection process.
-
-CAUTION: it appears that Adobe Photoshop writes inverted data in CMYK JPEG
-files: 0 represents 100% ink coverage, rather than 0% ink as you'd expect.
-This is arguably a bug in Photoshop, but if you need to work with Photoshop
-CMYK files, you will have to deal with it in your application. We cannot
-"fix" this in the library by inverting the data during the CMYK<=>YCCK
-transform, because that would break other applications, notably Ghostscript.
-Photoshop versions prior to 3.0 write EPS files containing JPEG-encoded CMYK
-data in the same inverted-YCCK representation used in bare JPEG files, but
-the surrounding PostScript code performs an inversion using the PS image
-operator. I am told that Photoshop 3.0 will write uninverted YCCK in
-EPS/JPEG files, and will omit the PS-level inversion. (But the data
-polarity used in bare JPEG files will not change in 3.0.) In either case,
-the JPEG library must not invert the data itself, or else Ghostscript would
-read these EPS files incorrectly.
-
-
-Error handling
---------------
-
-When the default error handler is used, any error detected inside the JPEG
-routines will cause a message to be printed on stderr, followed by exit().
-You can supply your own error handling routines to override this behavior
-and to control the treatment of nonfatal warnings and trace/debug messages.
-The file example.c illustrates the most common case, which is to have the
-application regain control after an error rather than exiting.
-
-The JPEG library never writes any message directly; it always goes through
-the error handling routines. Three classes of messages are recognized:
- * Fatal errors: the library cannot continue.
- * Warnings: the library can continue, but the data is corrupt, and a
- damaged output image is likely to result.
- * Trace/informational messages. These come with a trace level indicating
- the importance of the message; you can control the verbosity of the
- program by adjusting the maximum trace level that will be displayed.
-
-You may, if you wish, simply replace the entire JPEG error handling module
-(jerror.c) with your own code. However, you can avoid code duplication by
-only replacing some of the routines depending on the behavior you need.
-This is accomplished by calling jpeg_std_error() as usual, but then overriding
-some of the method pointers in the jpeg_error_mgr struct, as illustrated by
-example.c.
-
-All of the error handling routines will receive a pointer to the JPEG object
-(a j_common_ptr which points to either a jpeg_compress_struct or a
-jpeg_decompress_struct; if you need to tell which, test the is_decompressor
-field). This struct includes a pointer to the error manager struct in its
-"err" field. Frequently, custom error handler routines will need to access
-additional data which is not known to the JPEG library or the standard error
-handler. The most convenient way to do this is to embed either the JPEG
-object or the jpeg_error_mgr struct in a larger structure that contains
-additional fields; then casting the passed pointer provides access to the
-additional fields. Again, see example.c for one way to do it. (Beginning
-with IJG version 6b, there is also a void pointer "client_data" in each
-JPEG object, which the application can also use to find related data.
-The library does not touch client_data at all.)
-
-The individual methods that you might wish to override are:
-
-error_exit (j_common_ptr cinfo)
- Receives control for a fatal error. Information sufficient to
- generate the error message has been stored in cinfo->err; call
- output_message to display it. Control must NOT return to the caller;
- generally this routine will exit() or longjmp() somewhere.
- Typically you would override this routine to get rid of the exit()
- default behavior. Note that if you continue processing, you should
- clean up the JPEG object with jpeg_abort() or jpeg_destroy().
-
-output_message (j_common_ptr cinfo)
- Actual output of any JPEG message. Override this to send messages
- somewhere other than stderr. Note that this method does not know
- how to generate a message, only where to send it.
-
-format_message (j_common_ptr cinfo, char * buffer)
- Constructs a readable error message string based on the error info
- stored in cinfo->err. This method is called by output_message. Few
- applications should need to override this method. One possible
- reason for doing so is to implement dynamic switching of error message
- language.
-
-emit_message (j_common_ptr cinfo, int msg_level)
- Decide whether or not to emit a warning or trace message; if so,
- calls output_message. The main reason for overriding this method
- would be to abort on warnings. msg_level is -1 for warnings,
- 0 and up for trace messages.
-
-Only error_exit() and emit_message() are called from the rest of the JPEG
-library; the other two are internal to the error handler.
-
-The actual message texts are stored in an array of strings which is pointed to
-by the field err->jpeg_message_table. The messages are numbered from 0 to
-err->last_jpeg_message, and it is these code numbers that are used in the
-JPEG library code. You could replace the message texts (for instance, with
-messages in French or German) by changing the message table pointer. See
-jerror.h for the default texts. CAUTION: this table will almost certainly
-change or grow from one library version to the next.
-
-It may be useful for an application to add its own message texts that are
-handled by the same mechanism. The error handler supports a second "add-on"
-message table for this purpose. To define an addon table, set the pointer
-err->addon_message_table and the message numbers err->first_addon_message and
-err->last_addon_message. If you number the addon messages beginning at 1000
-or so, you won't have to worry about conflicts with the library's built-in
-messages. See the sample applications cjpeg/djpeg for an example of using
-addon messages (the addon messages are defined in cderror.h).
-
-Actual invocation of the error handler is done via macros defined in jerror.h:
- ERREXITn(...) for fatal errors
- WARNMSn(...) for corrupt-data warnings
- TRACEMSn(...) for trace and informational messages.
-These macros store the message code and any additional parameters into the
-error handler struct, then invoke the error_exit() or emit_message() method.
-The variants of each macro are for varying numbers of additional parameters.
-The additional parameters are inserted into the generated message using
-standard printf() format codes.
-
-See jerror.h and jerror.c for further details.
-
-
-Compressed data handling (source and destination managers)
-----------------------------------------------------------
-
-The JPEG compression library sends its compressed data to a "destination
-manager" module. The default destination manager just writes the data to a
-stdio stream, but you can provide your own manager to do something else.
-Similarly, the decompression library calls a "source manager" to obtain the
-compressed data; you can provide your own source manager if you want the data
-to come from somewhere other than a stdio stream.
-
-In both cases, compressed data is processed a bufferload at a time: the
-destination or source manager provides a work buffer, and the library invokes
-the manager only when the buffer is filled or emptied. (You could define a
-one-character buffer to force the manager to be invoked for each byte, but
-that would be rather inefficient.) The buffer's size and location are
-controlled by the manager, not by the library. For example, if you desired to
-decompress a JPEG datastream that was all in memory, you could just make the
-buffer pointer and length point to the original data in memory. Then the
-buffer-reload procedure would be invoked only if the decompressor ran off the
-end of the datastream, which would indicate an erroneous datastream.
-
-The work buffer is defined as an array of datatype JOCTET, which is generally
-"char" or "unsigned char". On a machine where char is not exactly 8 bits
-wide, you must define JOCTET as a wider data type and then modify the data
-source and destination modules to transcribe the work arrays into 8-bit units
-on external storage.
-
-A data destination manager struct contains a pointer and count defining the
-next byte to write in the work buffer and the remaining free space:
-
- JOCTET * next_output_byte; /* => next byte to write in buffer */
- size_t free_in_buffer; /* # of byte spaces remaining in buffer */
-
-The library increments the pointer and decrements the count until the buffer
-is filled. The manager's empty_output_buffer method must reset the pointer
-and count. The manager is expected to remember the buffer's starting address
-and total size in private fields not visible to the library.
-
-A data destination manager provides three methods:
-
-init_destination (j_compress_ptr cinfo)
- Initialize destination. This is called by jpeg_start_compress()
- before any data is actually written. It must initialize
- next_output_byte and free_in_buffer. free_in_buffer must be
- initialized to a positive value.
-
-empty_output_buffer (j_compress_ptr cinfo)
- This is called whenever the buffer has filled (free_in_buffer
- reaches zero). In typical applications, it should write out the
- *entire* buffer (use the saved start address and buffer length;
- ignore the current state of next_output_byte and free_in_buffer).
- Then reset the pointer & count to the start of the buffer, and
- return TRUE indicating that the buffer has been dumped.
- free_in_buffer must be set to a positive value when TRUE is
- returned. A FALSE return should only be used when I/O suspension is
- desired (this operating mode is discussed in the next section).
-
-term_destination (j_compress_ptr cinfo)
- Terminate destination --- called by jpeg_finish_compress() after all
- data has been written. In most applications, this must flush any
- data remaining in the buffer. Use either next_output_byte or
- free_in_buffer to determine how much data is in the buffer.
-
-term_destination() is NOT called by jpeg_abort() or jpeg_destroy(). If you
-want the destination manager to be cleaned up during an abort, you must do it
-yourself.
-
-You will also need code to create a jpeg_destination_mgr struct, fill in its
-method pointers, and insert a pointer to the struct into the "dest" field of
-the JPEG compression object. This can be done in-line in your setup code if
-you like, but it's probably cleaner to provide a separate routine similar to
-the jpeg_stdio_dest() routine of the supplied destination manager.
-
-Decompression source managers follow a parallel design, but with some
-additional frammishes. The source manager struct contains a pointer and count
-defining the next byte to read from the work buffer and the number of bytes
-remaining:
-
- const JOCTET * next_input_byte; /* => next byte to read from buffer */
- size_t bytes_in_buffer; /* # of bytes remaining in buffer */
-
-The library increments the pointer and decrements the count until the buffer
-is emptied. The manager's fill_input_buffer method must reset the pointer and
-count. In most applications, the manager must remember the buffer's starting
-address and total size in private fields not visible to the library.
-
-A data source manager provides five methods:
-
-init_source (j_decompress_ptr cinfo)
- Initialize source. This is called by jpeg_read_header() before any
- data is actually read. Unlike init_destination(), it may leave
- bytes_in_buffer set to 0 (in which case a fill_input_buffer() call
- will occur immediately).
-
-fill_input_buffer (j_decompress_ptr cinfo)
- This is called whenever bytes_in_buffer has reached zero and more
- data is wanted. In typical applications, it should read fresh data
- into the buffer (ignoring the current state of next_input_byte and
- bytes_in_buffer), reset the pointer & count to the start of the
- buffer, and return TRUE indicating that the buffer has been reloaded.
- It is not necessary to fill the buffer entirely, only to obtain at
- least one more byte. bytes_in_buffer MUST be set to a positive value
- if TRUE is returned. A FALSE return should only be used when I/O
- suspension is desired (this mode is discussed in the next section).
-
-skip_input_data (j_decompress_ptr cinfo, long num_bytes)
- Skip num_bytes worth of data. The buffer pointer and count should
- be advanced over num_bytes input bytes, refilling the buffer as
- needed. This is used to skip over a potentially large amount of
- uninteresting data (such as an APPn marker). In some applications
- it may be possible to optimize away the reading of the skipped data,
- but it's not clear that being smart is worth much trouble; large
- skips are uncommon. bytes_in_buffer may be zero on return.
- A zero or negative skip count should be treated as a no-op.
-
-resync_to_restart (j_decompress_ptr cinfo, int desired)
- This routine is called only when the decompressor has failed to find
- a restart (RSTn) marker where one is expected. Its mission is to
- find a suitable point for resuming decompression. For most
- applications, we recommend that you just use the default resync
- procedure, jpeg_resync_to_restart(). However, if you are able to back
- up in the input data stream, or if you have a-priori knowledge about
- the likely location of restart markers, you may be able to do better.
- Read the read_restart_marker() and jpeg_resync_to_restart() routines
- in jdmarker.c if you think you'd like to implement your own resync
- procedure.
-
-term_source (j_decompress_ptr cinfo)
- Terminate source --- called by jpeg_finish_decompress() after all
- data has been read. Often a no-op.
-
-For both fill_input_buffer() and skip_input_data(), there is no such thing
-as an EOF return. If the end of the file has been reached, the routine has
-a choice of exiting via ERREXIT() or inserting fake data into the buffer.
-In most cases, generating a warning message and inserting a fake EOI marker
-is the best course of action --- this will allow the decompressor to output
-however much of the image is there. In pathological cases, the decompressor
-may swallow the EOI and again demand data ... just keep feeding it fake EOIs.
-jdatasrc.c illustrates the recommended error recovery behavior.
-
-term_source() is NOT called by jpeg_abort() or jpeg_destroy(). If you want
-the source manager to be cleaned up during an abort, you must do it yourself.
-
-You will also need code to create a jpeg_source_mgr struct, fill in its method
-pointers, and insert a pointer to the struct into the "src" field of the JPEG
-decompression object. This can be done in-line in your setup code if you
-like, but it's probably cleaner to provide a separate routine similar to the
-jpeg_stdio_src() routine of the supplied source manager.
-
-For more information, consult the stdio source and destination managers
-in jdatasrc.c and jdatadst.c.
-
-
-I/O suspension
---------------
-
-Some applications need to use the JPEG library as an incremental memory-to-
-memory filter: when the compressed data buffer is filled or emptied, they want
-control to return to the outer loop, rather than expecting that the buffer can
-be emptied or reloaded within the data source/destination manager subroutine.
-The library supports this need by providing an "I/O suspension" mode, which we
-describe in this section.
-
-The I/O suspension mode is not a panacea: nothing is guaranteed about the
-maximum amount of time spent in any one call to the library, so it will not
-eliminate response-time problems in single-threaded applications. If you
-need guaranteed response time, we suggest you "bite the bullet" and implement
-a real multi-tasking capability.
-
-To use I/O suspension, cooperation is needed between the calling application
-and the data source or destination manager; you will always need a custom
-source/destination manager. (Please read the previous section if you haven't
-already.) The basic idea is that the empty_output_buffer() or
-fill_input_buffer() routine is a no-op, merely returning FALSE to indicate
-that it has done nothing. Upon seeing this, the JPEG library suspends
-operation and returns to its caller. The surrounding application is
-responsible for emptying or refilling the work buffer before calling the
-JPEG library again.
-
-Compression suspension:
-
-For compression suspension, use an empty_output_buffer() routine that returns
-FALSE; typically it will not do anything else. This will cause the
-compressor to return to the caller of jpeg_write_scanlines(), with the return
-value indicating that not all the supplied scanlines have been accepted.
-The application must make more room in the output buffer, adjust the output
-buffer pointer/count appropriately, and then call jpeg_write_scanlines()
-again, pointing to the first unconsumed scanline.
-
-When forced to suspend, the compressor will backtrack to a convenient stopping
-point (usually the start of the current MCU); it will regenerate some output
-data when restarted. Therefore, although empty_output_buffer() is only
-called when the buffer is filled, you should NOT write out the entire buffer
-after a suspension. Write only the data up to the current position of
-next_output_byte/free_in_buffer. The data beyond that point will be
-regenerated after resumption.
-
-Because of the backtracking behavior, a good-size output buffer is essential
-for efficiency; you don't want the compressor to suspend often. (In fact, an
-overly small buffer could lead to infinite looping, if a single MCU required
-more data than would fit in the buffer.) We recommend a buffer of at least
-several Kbytes. You may want to insert explicit code to ensure that you don't
-call jpeg_write_scanlines() unless there is a reasonable amount of space in
-the output buffer; in other words, flush the buffer before trying to compress
-more data.
-
-The compressor does not allow suspension while it is trying to write JPEG
-markers at the beginning and end of the file. This means that:
- * At the beginning of a compression operation, there must be enough free
- space in the output buffer to hold the header markers (typically 600 or
- so bytes). The recommended buffer size is bigger than this anyway, so
- this is not a problem as long as you start with an empty buffer. However,
- this restriction might catch you if you insert large special markers, such
- as a JFIF thumbnail image, without flushing the buffer afterwards.
- * When you call jpeg_finish_compress(), there must be enough space in the
- output buffer to emit any buffered data and the final EOI marker. In the
- current implementation, half a dozen bytes should suffice for this, but
- for safety's sake we recommend ensuring that at least 100 bytes are free
- before calling jpeg_finish_compress().
-
-A more significant restriction is that jpeg_finish_compress() cannot suspend.
-This means you cannot use suspension with multi-pass operating modes, namely
-Huffman code optimization and multiple-scan output. Those modes write the
-whole file during jpeg_finish_compress(), which will certainly result in
-buffer overrun. (Note that this restriction applies only to compression,
-not decompression. The decompressor supports input suspension in all of its
-operating modes.)
-
-Decompression suspension:
-
-For decompression suspension, use a fill_input_buffer() routine that simply
-returns FALSE (except perhaps during error recovery, as discussed below).
-This will cause the decompressor to return to its caller with an indication
-that suspension has occurred. This can happen at four places:
- * jpeg_read_header(): will return JPEG_SUSPENDED.
- * jpeg_start_decompress(): will return FALSE, rather than its usual TRUE.
- * jpeg_read_scanlines(): will return the number of scanlines already
- completed (possibly 0).
- * jpeg_finish_decompress(): will return FALSE, rather than its usual TRUE.
-The surrounding application must recognize these cases, load more data into
-the input buffer, and repeat the call. In the case of jpeg_read_scanlines(),
-increment the passed pointers past any scanlines successfully read.
-
-Just as with compression, the decompressor will typically backtrack to a
-convenient restart point before suspending. When fill_input_buffer() is
-called, next_input_byte/bytes_in_buffer point to the current restart point,
-which is where the decompressor will backtrack to if FALSE is returned.
-The data beyond that position must NOT be discarded if you suspend; it needs
-to be re-read upon resumption. In most implementations, you'll need to shift
-this data down to the start of your work buffer and then load more data after
-it. Again, this behavior means that a several-Kbyte work buffer is essential
-for decent performance; furthermore, you should load a reasonable amount of
-new data before resuming decompression. (If you loaded, say, only one new
-byte each time around, you could waste a LOT of cycles.)
-
-The skip_input_data() source manager routine requires special care in a
-suspension scenario. This routine is NOT granted the ability to suspend the
-decompressor; it can decrement bytes_in_buffer to zero, but no more. If the
-requested skip distance exceeds the amount of data currently in the input
-buffer, then skip_input_data() must set bytes_in_buffer to zero and record the
-additional skip distance somewhere else. The decompressor will immediately
-call fill_input_buffer(), which should return FALSE, which will cause a
-suspension return. The surrounding application must then arrange to discard
-the recorded number of bytes before it resumes loading the input buffer.
-(Yes, this design is rather baroque, but it avoids complexity in the far more
-common case where a non-suspending source manager is used.)
-
-If the input data has been exhausted, we recommend that you emit a warning
-and insert dummy EOI markers just as a non-suspending data source manager
-would do. This can be handled either in the surrounding application logic or
-within fill_input_buffer(); the latter is probably more efficient. If
-fill_input_buffer() knows that no more data is available, it can set the
-pointer/count to point to a dummy EOI marker and then return TRUE just as
-though it had read more data in a non-suspending situation.
-
-The decompressor does not attempt to suspend within standard JPEG markers;
-instead it will backtrack to the start of the marker and reprocess the whole
-marker next time. Hence the input buffer must be large enough to hold the
-longest standard marker in the file. Standard JPEG markers should normally
-not exceed a few hundred bytes each (DHT tables are typically the longest).
-We recommend at least a 2K buffer for performance reasons, which is much
-larger than any correct marker is likely to be. For robustness against
-damaged marker length counts, you may wish to insert a test in your
-application for the case that the input buffer is completely full and yet
-the decoder has suspended without consuming any data --- otherwise, if this
-situation did occur, it would lead to an endless loop. (The library can't
-provide this test since it has no idea whether "the buffer is full", or
-even whether there is a fixed-size input buffer.)
-
-The input buffer would need to be 64K to allow for arbitrary COM or APPn
-markers, but these are handled specially: they are either saved into allocated
-memory, or skipped over by calling skip_input_data(). In the former case,
-suspension is handled correctly, and in the latter case, the problem of
-buffer overrun is placed on skip_input_data's shoulders, as explained above.
-Note that if you provide your own marker handling routine for large markers,
-you should consider how to deal with buffer overflow.
-
-Multiple-buffer management:
-
-In some applications it is desirable to store the compressed data in a linked
-list of buffer areas, so as to avoid data copying. This can be handled by
-having empty_output_buffer() or fill_input_buffer() set the pointer and count
-to reference the next available buffer; FALSE is returned only if no more
-buffers are available. Although seemingly straightforward, there is a
-pitfall in this approach: the backtrack that occurs when FALSE is returned
-could back up into an earlier buffer. For example, when fill_input_buffer()
-is called, the current pointer & count indicate the backtrack restart point.
-Since fill_input_buffer() will set the pointer and count to refer to a new
-buffer, the restart position must be saved somewhere else. Suppose a second
-call to fill_input_buffer() occurs in the same library call, and no
-additional input data is available, so fill_input_buffer must return FALSE.
-If the JPEG library has not moved the pointer/count forward in the current
-buffer, then *the correct restart point is the saved position in the prior
-buffer*. Prior buffers may be discarded only after the library establishes
-a restart point within a later buffer. Similar remarks apply for output into
-a chain of buffers.
-
-The library will never attempt to backtrack over a skip_input_data() call,
-so any skipped data can be permanently discarded. You still have to deal
-with the case of skipping not-yet-received data, however.
-
-It's much simpler to use only a single buffer; when fill_input_buffer() is
-called, move any unconsumed data (beyond the current pointer/count) down to
-the beginning of this buffer and then load new data into the remaining buffer
-space. This approach requires a little more data copying but is far easier
-to get right.
-
-
-Progressive JPEG support
-------------------------
-
-Progressive JPEG rearranges the stored data into a series of scans of
-increasing quality. In situations where a JPEG file is transmitted across a
-slow communications link, a decoder can generate a low-quality image very
-quickly from the first scan, then gradually improve the displayed quality as
-more scans are received. The final image after all scans are complete is
-identical to that of a regular (sequential) JPEG file of the same quality
-setting. Progressive JPEG files are often slightly smaller than equivalent
-sequential JPEG files, but the possibility of incremental display is the main
-reason for using progressive JPEG.
-
-The IJG encoder library generates progressive JPEG files when given a
-suitable "scan script" defining how to divide the data into scans.
-Creation of progressive JPEG files is otherwise transparent to the encoder.
-Progressive JPEG files can also be read transparently by the decoder library.
-If the decoding application simply uses the library as defined above, it
-will receive a final decoded image without any indication that the file was
-progressive. Of course, this approach does not allow incremental display.
-To perform incremental display, an application needs to use the decoder
-library's "buffered-image" mode, in which it receives a decoded image
-multiple times.
-
-Each displayed scan requires about as much work to decode as a full JPEG
-image of the same size, so the decoder must be fairly fast in relation to the
-data transmission rate in order to make incremental display useful. However,
-it is possible to skip displaying the image and simply add the incoming bits
-to the decoder's coefficient buffer. This is fast because only Huffman
-decoding need be done, not IDCT, upsampling, colorspace conversion, etc.
-The IJG decoder library allows the application to switch dynamically between
-displaying the image and simply absorbing the incoming bits. A properly
-coded application can automatically adapt the number of display passes to
-suit the time available as the image is received. Also, a final
-higher-quality display cycle can be performed from the buffered data after
-the end of the file is reached.
-
-Progressive compression:
-
-To create a progressive JPEG file (or a multiple-scan sequential JPEG file),
-set the scan_info cinfo field to point to an array of scan descriptors, and
-perform compression as usual. Instead of constructing your own scan list,
-you can call the jpeg_simple_progression() helper routine to create a
-recommended progression sequence; this method should be used by all
-applications that don't want to get involved in the nitty-gritty of
-progressive scan sequence design. (If you want to provide user control of
-scan sequences, you may wish to borrow the scan script reading code found
-in rdswitch.c, so that you can read scan script files just like cjpeg's.)
-When scan_info is not NULL, the compression library will store DCT'd data
-into a buffer array as jpeg_write_scanlines() is called, and will emit all
-the requested scans during jpeg_finish_compress(). This implies that
-multiple-scan output cannot be created with a suspending data destination
-manager, since jpeg_finish_compress() does not support suspension. We
-should also note that the compressor currently forces Huffman optimization
-mode when creating a progressive JPEG file, because the default Huffman
-tables are unsuitable for progressive files.
-
-Progressive decompression:
-
-When buffered-image mode is not used, the decoder library will read all of
-a multi-scan file during jpeg_start_decompress(), so that it can provide a
-final decoded image. (Here "multi-scan" means either progressive or
-multi-scan sequential.) This makes multi-scan files transparent to the
-decoding application. However, existing applications that used suspending
-input with version 5 of the IJG library will need to be modified to check
-for a suspension return from jpeg_start_decompress().
-
-To perform incremental display, an application must use the library's
-buffered-image mode. This is described in the next section.
-
-
-Buffered-image mode
--------------------
-
-In buffered-image mode, the library stores the partially decoded image in a
-coefficient buffer, from which it can be read out as many times as desired.
-This mode is typically used for incremental display of progressive JPEG files,
-but it can be used with any JPEG file. Each scan of a progressive JPEG file
-adds more data (more detail) to the buffered image. The application can
-display in lockstep with the source file (one display pass per input scan),
-or it can allow input processing to outrun display processing. By making
-input and display processing run independently, it is possible for the
-application to adapt progressive display to a wide range of data transmission
-rates.
-
-The basic control flow for buffered-image decoding is
-
- jpeg_create_decompress()
- set data source
- jpeg_read_header()
- set overall decompression parameters
- cinfo.buffered_image = TRUE; /* select buffered-image mode */
- jpeg_start_decompress()
- for (each output pass) {
- adjust output decompression parameters if required
- jpeg_start_output() /* start a new output pass */
- for (all scanlines in image) {
- jpeg_read_scanlines()
- display scanlines
- }
- jpeg_finish_output() /* terminate output pass */
- }
- jpeg_finish_decompress()
- jpeg_destroy_decompress()
-
-This differs from ordinary unbuffered decoding in that there is an additional
-level of looping. The application can choose how many output passes to make
-and how to display each pass.
-
-The simplest approach to displaying progressive images is to do one display
-pass for each scan appearing in the input file. In this case the outer loop
-condition is typically
- while (! jpeg_input_complete(&cinfo))
-and the start-output call should read
- jpeg_start_output(&cinfo, cinfo.input_scan_number);
-The second parameter to jpeg_start_output() indicates which scan of the input
-file is to be displayed; the scans are numbered starting at 1 for this
-purpose. (You can use a loop counter starting at 1 if you like, but using
-the library's input scan counter is easier.) The library automatically reads
-data as necessary to complete each requested scan, and jpeg_finish_output()
-advances to the next scan or end-of-image marker (hence input_scan_number
-will be incremented by the time control arrives back at jpeg_start_output()).
-With this technique, data is read from the input file only as needed, and
-input and output processing run in lockstep.
-
-After reading the final scan and reaching the end of the input file, the
-buffered image remains available; it can be read additional times by
-repeating the jpeg_start_output()/jpeg_read_scanlines()/jpeg_finish_output()
-sequence. For example, a useful technique is to use fast one-pass color
-quantization for display passes made while the image is arriving, followed by
-a final display pass using two-pass quantization for highest quality. This
-is done by changing the library parameters before the final output pass.
-Changing parameters between passes is discussed in detail below.
-
-In general the last scan of a progressive file cannot be recognized as such
-until after it is read, so a post-input display pass is the best approach if
-you want special processing in the final pass.
-
-When done with the image, be sure to call jpeg_finish_decompress() to release
-the buffered image (or just use jpeg_destroy_decompress()).
-
-If input data arrives faster than it can be displayed, the application can
-cause the library to decode input data in advance of what's needed to produce
-output. This is done by calling the routine jpeg_consume_input().
-The return value is one of the following:
- JPEG_REACHED_SOS: reached an SOS marker (the start of a new scan)
- JPEG_REACHED_EOI: reached the EOI marker (end of image)
- JPEG_ROW_COMPLETED: completed reading one MCU row of compressed data
- JPEG_SCAN_COMPLETED: completed reading last MCU row of current scan
- JPEG_SUSPENDED: suspended before completing any of the above
-(JPEG_SUSPENDED can occur only if a suspending data source is used.) This
-routine can be called at any time after initializing the JPEG object. It
-reads some additional data and returns when one of the indicated significant
-events occurs. (If called after the EOI marker is reached, it will
-immediately return JPEG_REACHED_EOI without attempting to read more data.)
-
-The library's output processing will automatically call jpeg_consume_input()
-whenever the output processing overtakes the input; thus, simple lockstep
-display requires no direct calls to jpeg_consume_input(). But by adding
-calls to jpeg_consume_input(), you can absorb data in advance of what is
-being displayed. This has two benefits:
- * You can limit buildup of unprocessed data in your input buffer.
- * You can eliminate extra display passes by paying attention to the
- state of the library's input processing.
-
-The first of these benefits only requires interspersing calls to
-jpeg_consume_input() with your display operations and any other processing
-you may be doing. To avoid wasting cycles due to backtracking, it's best to
-call jpeg_consume_input() only after a hundred or so new bytes have arrived.
-This is discussed further under "I/O suspension", above. (Note: the JPEG
-library currently is not thread-safe. You must not call jpeg_consume_input()
-from one thread of control if a different library routine is working on the
-same JPEG object in another thread.)
-
-When input arrives fast enough that more than one new scan is available
-before you start a new output pass, you may as well skip the output pass
-corresponding to the completed scan. This occurs for free if you pass
-cinfo.input_scan_number as the target scan number to jpeg_start_output().
-The input_scan_number field is simply the index of the scan currently being
-consumed by the input processor. You can ensure that this is up-to-date by
-emptying the input buffer just before calling jpeg_start_output(): call
-jpeg_consume_input() repeatedly until it returns JPEG_SUSPENDED or
-JPEG_REACHED_EOI.
-
-The target scan number passed to jpeg_start_output() is saved in the
-cinfo.output_scan_number field. The library's output processing calls
-jpeg_consume_input() whenever the current input scan number and row within
-that scan is less than or equal to the current output scan number and row.
-Thus, input processing can "get ahead" of the output processing but is not
-allowed to "fall behind". You can achieve several different effects by
-manipulating this interlock rule. For example, if you pass a target scan
-number greater than the current input scan number, the output processor will
-wait until that scan starts to arrive before producing any output. (To avoid
-an infinite loop, the target scan number is automatically reset to the last
-scan number when the end of image is reached. Thus, if you specify a large
-target scan number, the library will just absorb the entire input file and
-then perform an output pass. This is effectively the same as what
-jpeg_start_decompress() does when you don't select buffered-image mode.)
-When you pass a target scan number equal to the current input scan number,
-the image is displayed no faster than the current input scan arrives. The
-final possibility is to pass a target scan number less than the current input
-scan number; this disables the input/output interlock and causes the output
-processor to simply display whatever it finds in the image buffer, without
-waiting for input. (However, the library will not accept a target scan
-number less than one, so you can't avoid waiting for the first scan.)
-
-When data is arriving faster than the output display processing can advance
-through the image, jpeg_consume_input() will store data into the buffered
-image beyond the point at which the output processing is reading data out
-again. If the input arrives fast enough, it may "wrap around" the buffer to
-the point where the input is more than one whole scan ahead of the output.
-If the output processing simply proceeds through its display pass without
-paying attention to the input, the effect seen on-screen is that the lower
-part of the image is one or more scans better in quality than the upper part.
-Then, when the next output scan is started, you have a choice of what target
-scan number to use. The recommended choice is to use the current input scan
-number at that time, which implies that you've skipped the output scans
-corresponding to the input scans that were completed while you processed the
-previous output scan. In this way, the decoder automatically adapts its
-speed to the arriving data, by skipping output scans as necessary to keep up
-with the arriving data.
-
-When using this strategy, you'll want to be sure that you perform a final
-output pass after receiving all the data; otherwise your last display may not
-be full quality across the whole screen. So the right outer loop logic is
-something like this:
- do {
- absorb any waiting input by calling jpeg_consume_input()
- final_pass = jpeg_input_complete(&cinfo);
- adjust output decompression parameters if required
- jpeg_start_output(&cinfo, cinfo.input_scan_number);
- ...
- jpeg_finish_output()
- } while (! final_pass);
-rather than quitting as soon as jpeg_input_complete() returns TRUE. This
-arrangement makes it simple to use higher-quality decoding parameters
-for the final pass. But if you don't want to use special parameters for
-the final pass, the right loop logic is like this:
- for (;;) {
- absorb any waiting input by calling jpeg_consume_input()
- jpeg_start_output(&cinfo, cinfo.input_scan_number);
- ...
- jpeg_finish_output()
- if (jpeg_input_complete(&cinfo) &&
- cinfo.input_scan_number == cinfo.output_scan_number)
- break;
- }
-In this case you don't need to know in advance whether an output pass is to
-be the last one, so it's not necessary to have reached EOF before starting
-the final output pass; rather, what you want to test is whether the output
-pass was performed in sync with the final input scan. This form of the loop
-will avoid an extra output pass whenever the decoder is able (or nearly able)
-to keep up with the incoming data.
-
-When the data transmission speed is high, you might begin a display pass,
-then find that much or all of the file has arrived before you can complete
-the pass. (You can detect this by noting the JPEG_REACHED_EOI return code
-from jpeg_consume_input(), or equivalently by testing jpeg_input_complete().)
-In this situation you may wish to abort the current display pass and start a
-new one using the newly arrived information. To do so, just call
-jpeg_finish_output() and then start a new pass with jpeg_start_output().
-
-A variant strategy is to abort and restart display if more than one complete
-scan arrives during an output pass; this can be detected by noting
-JPEG_REACHED_SOS returns and/or examining cinfo.input_scan_number. This
-idea should be employed with caution, however, since the display process
-might never get to the bottom of the image before being aborted, resulting
-in the lower part of the screen being several passes worse than the upper.
-In most cases it's probably best to abort an output pass only if the whole
-file has arrived and you want to begin the final output pass immediately.
-
-When receiving data across a communication link, we recommend always using
-the current input scan number for the output target scan number; if a
-higher-quality final pass is to be done, it should be started (aborting any
-incomplete output pass) as soon as the end of file is received. However,
-many other strategies are possible. For example, the application can examine
-the parameters of the current input scan and decide whether to display it or
-not. If the scan contains only chroma data, one might choose not to use it
-as the target scan, expecting that the scan will be small and will arrive
-quickly. To skip to the next scan, call jpeg_consume_input() until it
-returns JPEG_REACHED_SOS or JPEG_REACHED_EOI. Or just use the next higher
-number as the target scan for jpeg_start_output(); but that method doesn't
-let you inspect the next scan's parameters before deciding to display it.
-
-
-In buffered-image mode, jpeg_start_decompress() never performs input and
-thus never suspends. An application that uses input suspension with
-buffered-image mode must be prepared for suspension returns from these
-routines:
-* jpeg_start_output() performs input only if you request 2-pass quantization
- and the target scan isn't fully read yet. (This is discussed below.)
-* jpeg_read_scanlines(), as always, returns the number of scanlines that it
- was able to produce before suspending.
-* jpeg_finish_output() will read any markers following the target scan,
- up to the end of the file or the SOS marker that begins another scan.
- (But it reads no input if jpeg_consume_input() has already reached the
- end of the file or a SOS marker beyond the target output scan.)
-* jpeg_finish_decompress() will read until the end of file, and thus can
- suspend if the end hasn't already been reached (as can be tested by
- calling jpeg_input_complete()).
-jpeg_start_output(), jpeg_finish_output(), and jpeg_finish_decompress()
-all return TRUE if they completed their tasks, FALSE if they had to suspend.
-In the event of a FALSE return, the application must load more input data
-and repeat the call. Applications that use non-suspending data sources need
-not check the return values of these three routines.
-
-
-It is possible to change decoding parameters between output passes in the
-buffered-image mode. The decoder library currently supports only very
-limited changes of parameters. ONLY THE FOLLOWING parameter changes are
-allowed after jpeg_start_decompress() is called:
-* dct_method can be changed before each call to jpeg_start_output().
- For example, one could use a fast DCT method for early scans, changing
- to a higher quality method for the final scan.
-* dither_mode can be changed before each call to jpeg_start_output();
- of course this has no impact if not using color quantization. Typically
- one would use ordered dither for initial passes, then switch to
- Floyd-Steinberg dither for the final pass. Caution: changing dither mode
- can cause more memory to be allocated by the library. Although the amount
- of memory involved is not large (a scanline or so), it may cause the
- initial max_memory_to_use specification to be exceeded, which in the worst
- case would result in an out-of-memory failure.
-* do_block_smoothing can be changed before each call to jpeg_start_output().
- This setting is relevant only when decoding a progressive JPEG image.
- During the first DC-only scan, block smoothing provides a very "fuzzy" look
- instead of the very "blocky" look seen without it; which is better seems a
- matter of personal taste. But block smoothing is nearly always a win
- during later stages, especially when decoding a successive-approximation
- image: smoothing helps to hide the slight blockiness that otherwise shows
- up on smooth gradients until the lowest coefficient bits are sent.
-* Color quantization mode can be changed under the rules described below.
- You *cannot* change between full-color and quantized output (because that
- would alter the required I/O buffer sizes), but you can change which
- quantization method is used.
-
-When generating color-quantized output, changing quantization method is a
-very useful way of switching between high-speed and high-quality display.
-The library allows you to change among its three quantization methods:
-1. Single-pass quantization to a fixed color cube.
- Selected by cinfo.two_pass_quantize = FALSE and cinfo.colormap = NULL.
-2. Single-pass quantization to an application-supplied colormap.
- Selected by setting cinfo.colormap to point to the colormap (the value of
- two_pass_quantize is ignored); also set cinfo.actual_number_of_colors.
-3. Two-pass quantization to a colormap chosen specifically for the image.
- Selected by cinfo.two_pass_quantize = TRUE and cinfo.colormap = NULL.
- (This is the default setting selected by jpeg_read_header, but it is
- probably NOT what you want for the first pass of progressive display!)
-These methods offer successively better quality and lesser speed. However,
-only the first method is available for quantizing in non-RGB color spaces.
-
-IMPORTANT: because the different quantizer methods have very different
-working-storage requirements, the library requires you to indicate which
-one(s) you intend to use before you call jpeg_start_decompress(). (If we did
-not require this, the max_memory_to_use setting would be a complete fiction.)
-You do this by setting one or more of these three cinfo fields to TRUE:
- enable_1pass_quant Fixed color cube colormap
- enable_external_quant Externally-supplied colormap
- enable_2pass_quant Two-pass custom colormap
-All three are initialized FALSE by jpeg_read_header(). But
-jpeg_start_decompress() automatically sets TRUE the one selected by the
-current two_pass_quantize and colormap settings, so you only need to set the
-enable flags for any other quantization methods you plan to change to later.
-
-After setting the enable flags correctly at jpeg_start_decompress() time, you
-can change to any enabled quantization method by setting two_pass_quantize
-and colormap properly just before calling jpeg_start_output(). The following
-special rules apply:
-1. You must explicitly set cinfo.colormap to NULL when switching to 1-pass
- or 2-pass mode from a different mode, or when you want the 2-pass
- quantizer to be re-run to generate a new colormap.
-2. To switch to an external colormap, or to change to a different external
- colormap than was used on the prior pass, you must call
- jpeg_new_colormap() after setting cinfo.colormap.
-NOTE: if you want to use the same colormap as was used in the prior pass,
-you should not do either of these things. This will save some nontrivial
-switchover costs.
-(These requirements exist because cinfo.colormap will always be non-NULL
-after completing a prior output pass, since both the 1-pass and 2-pass
-quantizers set it to point to their output colormaps. Thus you have to
-do one of these two things to notify the library that something has changed.
-Yup, it's a bit klugy, but it's necessary to do it this way for backwards
-compatibility.)
-
-Note that in buffered-image mode, the library generates any requested colormap
-during jpeg_start_output(), not during jpeg_start_decompress().
-
-When using two-pass quantization, jpeg_start_output() makes a pass over the
-buffered image to determine the optimum color map; it therefore may take a
-significant amount of time, whereas ordinarily it does little work. The
-progress monitor hook is called during this pass, if defined. It is also
-important to realize that if the specified target scan number is greater than
-or equal to the current input scan number, jpeg_start_output() will attempt
-to consume input as it makes this pass. If you use a suspending data source,
-you need to check for a FALSE return from jpeg_start_output() under these
-conditions. The combination of 2-pass quantization and a not-yet-fully-read
-target scan is the only case in which jpeg_start_output() will consume input.
-
-
-Application authors who support buffered-image mode may be tempted to use it
-for all JPEG images, even single-scan ones. This will work, but it is
-inefficient: there is no need to create an image-sized coefficient buffer for
-single-scan images. Requesting buffered-image mode for such an image wastes
-memory. Worse, it can cost time on large images, since the buffered data has
-to be swapped out or written to a temporary file. If you are concerned about
-maximum performance on baseline JPEG files, you should use buffered-image
-mode only when the incoming file actually has multiple scans. This can be
-tested by calling jpeg_has_multiple_scans(), which will return a correct
-result at any time after jpeg_read_header() completes.
-
-It is also worth noting that when you use jpeg_consume_input() to let input
-processing get ahead of output processing, the resulting pattern of access to
-the coefficient buffer is quite nonsequential. It's best to use the memory
-manager jmemnobs.c if you can (ie, if you have enough real or virtual main
-memory). If not, at least make sure that max_memory_to_use is set as high as
-possible. If the JPEG memory manager has to use a temporary file, you will
-probably see a lot of disk traffic and poor performance. (This could be
-improved with additional work on the memory manager, but we haven't gotten
-around to it yet.)
-
-In some applications it may be convenient to use jpeg_consume_input() for all
-input processing, including reading the initial markers; that is, you may
-wish to call jpeg_consume_input() instead of jpeg_read_header() during
-startup. This works, but note that you must check for JPEG_REACHED_SOS and
-JPEG_REACHED_EOI return codes as the equivalent of jpeg_read_header's codes.
-Once the first SOS marker has been reached, you must call
-jpeg_start_decompress() before jpeg_consume_input() will consume more input;
-it'll just keep returning JPEG_REACHED_SOS until you do. If you read a
-tables-only file this way, jpeg_consume_input() will return JPEG_REACHED_EOI
-without ever returning JPEG_REACHED_SOS; be sure to check for this case.
-If this happens, the decompressor will not read any more input until you call
-jpeg_abort() to reset it. It is OK to call jpeg_consume_input() even when not
-using buffered-image mode, but in that case it's basically a no-op after the
-initial markers have been read: it will just return JPEG_SUSPENDED.
-
-
-Abbreviated datastreams and multiple images
--------------------------------------------
-
-A JPEG compression or decompression object can be reused to process multiple
-images. This saves a small amount of time per image by eliminating the
-"create" and "destroy" operations, but that isn't the real purpose of the
-feature. Rather, reuse of an object provides support for abbreviated JPEG
-datastreams. Object reuse can also simplify processing a series of images in
-a single input or output file. This section explains these features.
-
-A JPEG file normally contains several hundred bytes worth of quantization
-and Huffman tables. In a situation where many images will be stored or
-transmitted with identical tables, this may represent an annoying overhead.
-The JPEG standard therefore permits tables to be omitted. The standard
-defines three classes of JPEG datastreams:
- * "Interchange" datastreams contain an image and all tables needed to decode
- the image. These are the usual kind of JPEG file.
- * "Abbreviated image" datastreams contain an image, but are missing some or
- all of the tables needed to decode that image.
- * "Abbreviated table specification" (henceforth "tables-only") datastreams
- contain only table specifications.
-To decode an abbreviated image, it is necessary to load the missing table(s)
-into the decoder beforehand. This can be accomplished by reading a separate
-tables-only file. A variant scheme uses a series of images in which the first
-image is an interchange (complete) datastream, while subsequent ones are
-abbreviated and rely on the tables loaded by the first image. It is assumed
-that once the decoder has read a table, it will remember that table until a
-new definition for the same table number is encountered.
-
-It is the application designer's responsibility to figure out how to associate
-the correct tables with an abbreviated image. While abbreviated datastreams
-can be useful in a closed environment, their use is strongly discouraged in
-any situation where data exchange with other applications might be needed.
-Caveat designer.
-
-The JPEG library provides support for reading and writing any combination of
-tables-only datastreams and abbreviated images. In both compression and
-decompression objects, a quantization or Huffman table will be retained for
-the lifetime of the object, unless it is overwritten by a new table definition.
-
-
-To create abbreviated image datastreams, it is only necessary to tell the
-compressor not to emit some or all of the tables it is using. Each
-quantization and Huffman table struct contains a boolean field "sent_table",
-which normally is initialized to FALSE. For each table used by the image, the
-header-writing process emits the table and sets sent_table = TRUE unless it is
-already TRUE. (In normal usage, this prevents outputting the same table
-definition multiple times, as would otherwise occur because the chroma
-components typically share tables.) Thus, setting this field to TRUE before
-calling jpeg_start_compress() will prevent the table from being written at
-all.
-
-If you want to create a "pure" abbreviated image file containing no tables,
-just call "jpeg_suppress_tables(&cinfo, TRUE)" after constructing all the
-tables. If you want to emit some but not all tables, you'll need to set the
-individual sent_table fields directly.
-
-To create an abbreviated image, you must also call jpeg_start_compress()
-with a second parameter of FALSE, not TRUE. Otherwise jpeg_start_compress()
-will force all the sent_table fields to FALSE. (This is a safety feature to
-prevent abbreviated images from being created accidentally.)
-
-To create a tables-only file, perform the same parameter setup that you
-normally would, but instead of calling jpeg_start_compress() and so on, call
-jpeg_write_tables(&cinfo). This will write an abbreviated datastream
-containing only SOI, DQT and/or DHT markers, and EOI. All the quantization
-and Huffman tables that are currently defined in the compression object will
-be emitted unless their sent_tables flag is already TRUE, and then all the
-sent_tables flags will be set TRUE.
-
-A sure-fire way to create matching tables-only and abbreviated image files
-is to proceed as follows:
-
- create JPEG compression object
- set JPEG parameters
- set destination to tables-only file
- jpeg_write_tables(&cinfo);
- set destination to image file
- jpeg_start_compress(&cinfo, FALSE);
- write data...
- jpeg_finish_compress(&cinfo);
-
-Since the JPEG parameters are not altered between writing the table file and
-the abbreviated image file, the same tables are sure to be used. Of course,
-you can repeat the jpeg_start_compress() ... jpeg_finish_compress() sequence
-many times to produce many abbreviated image files matching the table file.
-
-You cannot suppress output of the computed Huffman tables when Huffman
-optimization is selected. (If you could, there'd be no way to decode the
-image...) Generally, you don't want to set optimize_coding = TRUE when
-you are trying to produce abbreviated files.
-
-In some cases you might want to compress an image using tables which are
-not stored in the application, but are defined in an interchange or
-tables-only file readable by the application. This can be done by setting up
-a JPEG decompression object to read the specification file, then copying the
-tables into your compression object. See jpeg_copy_critical_parameters()
-for an example of copying quantization tables.
-
-
-To read abbreviated image files, you simply need to load the proper tables
-into the decompression object before trying to read the abbreviated image.
-If the proper tables are stored in the application program, you can just
-allocate the table structs and fill in their contents directly. For example,
-to load a fixed quantization table into table slot "n":
-
- if (cinfo.quant_tbl_ptrs[n] == NULL)
- cinfo.quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) &cinfo);
- quant_ptr = cinfo.quant_tbl_ptrs[n]; /* quant_ptr is JQUANT_TBL* */
- for (i = 0; i < 64; i++) {
- /* Qtable[] is desired quantization table, in natural array order */
- quant_ptr->quantval[i] = Qtable[i];
- }
-
-Code to load a fixed Huffman table is typically (for AC table "n"):
-
- if (cinfo.ac_huff_tbl_ptrs[n] == NULL)
- cinfo.ac_huff_tbl_ptrs[n] = jpeg_alloc_huff_table((j_common_ptr) &cinfo);
- huff_ptr = cinfo.ac_huff_tbl_ptrs[n]; /* huff_ptr is JHUFF_TBL* */
- for (i = 1; i <= 16; i++) {
- /* counts[i] is number of Huffman codes of length i bits, i=1..16 */
- huff_ptr->bits[i] = counts[i];
- }
- for (i = 0; i < 256; i++) {
- /* symbols[] is the list of Huffman symbols, in code-length order */
- huff_ptr->huffval[i] = symbols[i];
- }
-
-(Note that trying to set cinfo.quant_tbl_ptrs[n] to point directly at a
-constant JQUANT_TBL object is not safe. If the incoming file happened to
-contain a quantization table definition, your master table would get
-overwritten! Instead allocate a working table copy and copy the master table
-into it, as illustrated above. Ditto for Huffman tables, of course.)
-
-You might want to read the tables from a tables-only file, rather than
-hard-wiring them into your application. The jpeg_read_header() call is
-sufficient to read a tables-only file. You must pass a second parameter of
-FALSE to indicate that you do not require an image to be present. Thus, the
-typical scenario is
-
- create JPEG decompression object
- set source to tables-only file
- jpeg_read_header(&cinfo, FALSE);
- set source to abbreviated image file
- jpeg_read_header(&cinfo, TRUE);
- set decompression parameters
- jpeg_start_decompress(&cinfo);
- read data...
- jpeg_finish_decompress(&cinfo);
-
-In some cases, you may want to read a file without knowing whether it contains
-an image or just tables. In that case, pass FALSE and check the return value
-from jpeg_read_header(): it will be JPEG_HEADER_OK if an image was found,
-JPEG_HEADER_TABLES_ONLY if only tables were found. (A third return value,
-JPEG_SUSPENDED, is possible when using a suspending data source manager.)
-Note that jpeg_read_header() will not complain if you read an abbreviated
-image for which you haven't loaded the missing tables; the missing-table check
-occurs later, in jpeg_start_decompress().
-
-
-It is possible to read a series of images from a single source file by
-repeating the jpeg_read_header() ... jpeg_finish_decompress() sequence,
-without releasing/recreating the JPEG object or the data source module.
-(If you did reinitialize, any partial bufferload left in the data source
-buffer at the end of one image would be discarded, causing you to lose the
-start of the next image.) When you use this method, stored tables are
-automatically carried forward, so some of the images can be abbreviated images
-that depend on tables from earlier images.
-
-If you intend to write a series of images into a single destination file,
-you might want to make a specialized data destination module that doesn't
-flush the output buffer at term_destination() time. This would speed things
-up by some trifling amount. Of course, you'd need to remember to flush the
-buffer after the last image. You can make the later images be abbreviated
-ones by passing FALSE to jpeg_start_compress().
-
-
-Special markers
----------------
-
-Some applications may need to insert or extract special data in the JPEG
-datastream. The JPEG standard provides marker types "COM" (comment) and
-"APP0" through "APP15" (application) to hold application-specific data.
-Unfortunately, the use of these markers is not specified by the standard.
-COM markers are fairly widely used to hold user-supplied text. The JFIF file
-format spec uses APP0 markers with specified initial strings to hold certain
-data. Adobe applications use APP14 markers beginning with the string "Adobe"
-for miscellaneous data. Other APPn markers are rarely seen, but might
-contain almost anything.
-
-If you wish to store user-supplied text, we recommend you use COM markers
-and place readable 7-bit ASCII text in them. Newline conventions are not
-standardized --- expect to find LF (Unix style), CR/LF (DOS style), or CR
-(Mac style). A robust COM reader should be able to cope with random binary
-garbage, including nulls, since some applications generate COM markers
-containing non-ASCII junk. (But yours should not be one of them.)
-
-For program-supplied data, use an APPn marker, and be sure to begin it with an
-identifying string so that you can tell whether the marker is actually yours.
-It's probably best to avoid using APP0 or APP14 for any private markers.
-(NOTE: the upcoming SPIFF standard will use APP8 markers; we recommend you
-not use APP8 markers for any private purposes, either.)
-
-Keep in mind that at most 65533 bytes can be put into one marker, but you
-can have as many markers as you like.
-
-By default, the IJG compression library will write a JFIF APP0 marker if the
-selected JPEG colorspace is grayscale or YCbCr, or an Adobe APP14 marker if
-the selected colorspace is RGB, CMYK, or YCCK. You can disable this, but
-we don't recommend it. The decompression library will recognize JFIF and
-Adobe markers and will set the JPEG colorspace properly when one is found.
-
-
-You can write special markers immediately following the datastream header by
-calling jpeg_write_marker() after jpeg_start_compress() and before the first
-call to jpeg_write_scanlines(). When you do this, the markers appear after
-the SOI and the JFIF APP0 and Adobe APP14 markers (if written), but before
-all else. Specify the marker type parameter as "JPEG_COM" for COM or
-"JPEG_APP0 + n" for APPn. (Actually, jpeg_write_marker will let you write
-any marker type, but we don't recommend writing any other kinds of marker.)
-For example, to write a user comment string pointed to by comment_text:
- jpeg_write_marker(cinfo, JPEG_COM, comment_text, strlen(comment_text));
-
-If it's not convenient to store all the marker data in memory at once,
-you can instead call jpeg_write_m_header() followed by multiple calls to
-jpeg_write_m_byte(). If you do it this way, it's your responsibility to
-call jpeg_write_m_byte() exactly the number of times given in the length
-parameter to jpeg_write_m_header(). (This method lets you empty the
-output buffer partway through a marker, which might be important when
-using a suspending data destination module. In any case, if you are using
-a suspending destination, you should flush its buffer after inserting
-any special markers. See "I/O suspension".)
-
-Or, if you prefer to synthesize the marker byte sequence yourself,
-you can just cram it straight into the data destination module.
-
-If you are writing JFIF 1.02 extension markers (thumbnail images), don't
-forget to set cinfo.JFIF_minor_version = 2 so that the encoder will write the
-correct JFIF version number in the JFIF header marker. The library's default
-is to write version 1.01, but that's wrong if you insert any 1.02 extension
-markers. (We could probably get away with just defaulting to 1.02, but there
-used to be broken decoders that would complain about unknown minor version
-numbers. To reduce compatibility risks it's safest not to write 1.02 unless
-you are actually using 1.02 extensions.)
-
-
-When reading, two methods of handling special markers are available:
-1. You can ask the library to save the contents of COM and/or APPn markers
-into memory, and then examine them at your leisure afterwards.
-2. You can supply your own routine to process COM and/or APPn markers
-on-the-fly as they are read.
-The first method is simpler to use, especially if you are using a suspending
-data source; writing a marker processor that copes with input suspension is
-not easy (consider what happens if the marker is longer than your available
-input buffer). However, the second method conserves memory since the marker
-data need not be kept around after it's been processed.
-
-For either method, you'd normally set up marker handling after creating a
-decompression object and before calling jpeg_read_header(), because the
-markers of interest will typically be near the head of the file and so will
-be scanned by jpeg_read_header. Once you've established a marker handling
-method, it will be used for the life of that decompression object
-(potentially many datastreams), unless you change it. Marker handling is
-determined separately for COM markers and for each APPn marker code.
-
-
-To save the contents of special markers in memory, call
- jpeg_save_markers(cinfo, marker_code, length_limit)
-where marker_code is the marker type to save, JPEG_COM or JPEG_APP0+n.
-(To arrange to save all the special marker types, you need to call this
-routine 17 times, for COM and APP0-APP15.) If the incoming marker is longer
-than length_limit data bytes, only length_limit bytes will be saved; this
-parameter allows you to avoid chewing up memory when you only need to see the
-first few bytes of a potentially large marker. If you want to save all the
-data, set length_limit to 0xFFFF; that is enough since marker lengths are only
-16 bits. As a special case, setting length_limit to 0 prevents that marker
-type from being saved at all. (That is the default behavior, in fact.)
-
-After jpeg_read_header() completes, you can examine the special markers by
-following the cinfo->marker_list pointer chain. All the special markers in
-the file appear in this list, in order of their occurrence in the file (but
-omitting any markers of types you didn't ask for). Both the original data
-length and the saved data length are recorded for each list entry; the latter
-will not exceed length_limit for the particular marker type. Note that these
-lengths exclude the marker length word, whereas the stored representation
-within the JPEG file includes it. (Hence the maximum data length is really
-only 65533.)
-
-It is possible that additional special markers appear in the file beyond the
-SOS marker at which jpeg_read_header stops; if so, the marker list will be
-extended during reading of the rest of the file. This is not expected to be
-common, however. If you are short on memory you may want to reset the length
-limit to zero for all marker types after finishing jpeg_read_header, to
-ensure that the max_memory_to_use setting cannot be exceeded due to addition
-of later markers.
-
-The marker list remains stored until you call jpeg_finish_decompress or
-jpeg_abort, at which point the memory is freed and the list is set to empty.
-(jpeg_destroy also releases the storage, of course.)
-
-Note that the library is internally interested in APP0 and APP14 markers;
-if you try to set a small nonzero length limit on these types, the library
-will silently force the length up to the minimum it wants. (But you can set
-a zero length limit to prevent them from being saved at all.) Also, in a
-16-bit environment, the maximum length limit may be constrained to less than
-65533 by malloc() limitations. It is therefore best not to assume that the
-effective length limit is exactly what you set it to be.
-
-
-If you want to supply your own marker-reading routine, you do it by calling
-jpeg_set_marker_processor(). A marker processor routine must have the
-signature
- boolean jpeg_marker_parser_method (j_decompress_ptr cinfo)
-Although the marker code is not explicitly passed, the routine can find it
-in cinfo->unread_marker. At the time of call, the marker proper has been
-read from the data source module. The processor routine is responsible for
-reading the marker length word and the remaining parameter bytes, if any.
-Return TRUE to indicate success. (FALSE should be returned only if you are
-using a suspending data source and it tells you to suspend. See the standard
-marker processors in jdmarker.c for appropriate coding methods if you need to
-use a suspending data source.)
-
-If you override the default APP0 or APP14 processors, it is up to you to
-recognize JFIF and Adobe markers if you want colorspace recognition to occur
-properly. We recommend copying and extending the default processors if you
-want to do that. (A better idea is to save these marker types for later
-examination by calling jpeg_save_markers(); that method doesn't interfere
-with the library's own processing of these markers.)
-
-jpeg_set_marker_processor() and jpeg_save_markers() are mutually exclusive
---- if you call one it overrides any previous call to the other, for the
-particular marker type specified.
-
-A simple example of an external COM processor can be found in djpeg.c.
-Also, see jpegtran.c for an example of using jpeg_save_markers.
-
-
-Raw (downsampled) image data
-----------------------------
-
-Some applications need to supply already-downsampled image data to the JPEG
-compressor, or to receive raw downsampled data from the decompressor. The
-library supports this requirement by allowing the application to write or
-read raw data, bypassing the normal preprocessing or postprocessing steps.
-The interface is different from the standard one and is somewhat harder to
-use. If your interest is merely in bypassing color conversion, we recommend
-that you use the standard interface and simply set jpeg_color_space =
-in_color_space (or jpeg_color_space = out_color_space for decompression).
-The mechanism described in this section is necessary only to supply or
-receive downsampled image data, in which not all components have the same
-dimensions.
-
-
-To compress raw data, you must supply the data in the colorspace to be used
-in the JPEG file (please read the earlier section on Special color spaces)
-and downsampled to the sampling factors specified in the JPEG parameters.
-You must supply the data in the format used internally by the JPEG library,
-namely a JSAMPIMAGE array. This is an array of pointers to two-dimensional
-arrays, each of type JSAMPARRAY. Each 2-D array holds the values for one
-color component. This structure is necessary since the components are of
-different sizes. If the image dimensions are not a multiple of the MCU size,
-you must also pad the data correctly (usually, this is done by replicating
-the last column and/or row). The data must be padded to a multiple of a DCT
-block in each component: that is, each downsampled row must contain a
-multiple of 8 valid samples, and there must be a multiple of 8 sample rows
-for each component. (For applications such as conversion of digital TV
-images, the standard image size is usually a multiple of the DCT block size,
-so that no padding need actually be done.)
-
-The procedure for compression of raw data is basically the same as normal
-compression, except that you call jpeg_write_raw_data() in place of
-jpeg_write_scanlines(). Before calling jpeg_start_compress(), you must do
-the following:
- * Set cinfo->raw_data_in to TRUE. (It is set FALSE by jpeg_set_defaults().)
- This notifies the library that you will be supplying raw data.
- * Ensure jpeg_color_space is correct --- an explicit jpeg_set_colorspace()
- call is a good idea. Note that since color conversion is bypassed,
- in_color_space is ignored, except that jpeg_set_defaults() uses it to
- choose the default jpeg_color_space setting.
- * Ensure the sampling factors, cinfo->comp_info[i].h_samp_factor and
- cinfo->comp_info[i].v_samp_factor, are correct. Since these indicate the
- dimensions of the data you are supplying, it's wise to set them
- explicitly, rather than assuming the library's defaults are what you want.
-
-To pass raw data to the library, call jpeg_write_raw_data() in place of
-jpeg_write_scanlines(). The two routines work similarly except that
-jpeg_write_raw_data takes a JSAMPIMAGE data array rather than JSAMPARRAY.
-The scanlines count passed to and returned from jpeg_write_raw_data is
-measured in terms of the component with the largest v_samp_factor.
-
-jpeg_write_raw_data() processes one MCU row per call, which is to say
-v_samp_factor*DCTSIZE sample rows of each component. The passed num_lines
-value must be at least max_v_samp_factor*DCTSIZE, and the return value will
-be exactly that amount (or possibly some multiple of that amount, in future
-library versions). This is true even on the last call at the bottom of the
-image; don't forget to pad your data as necessary.
-
-The required dimensions of the supplied data can be computed for each
-component as
- cinfo->comp_info[i].width_in_blocks*DCTSIZE samples per row
- cinfo->comp_info[i].height_in_blocks*DCTSIZE rows in image
-after jpeg_start_compress() has initialized those fields. If the valid data
-is smaller than this, it must be padded appropriately. For some sampling
-factors and image sizes, additional dummy DCT blocks are inserted to make
-the image a multiple of the MCU dimensions. The library creates such dummy
-blocks itself; it does not read them from your supplied data. Therefore you
-need never pad by more than DCTSIZE samples. An example may help here.
-Assume 2h2v downsampling of YCbCr data, that is
- cinfo->comp_info[0].h_samp_factor = 2 for Y
- cinfo->comp_info[0].v_samp_factor = 2
- cinfo->comp_info[1].h_samp_factor = 1 for Cb
- cinfo->comp_info[1].v_samp_factor = 1
- cinfo->comp_info[2].h_samp_factor = 1 for Cr
- cinfo->comp_info[2].v_samp_factor = 1
-and suppose that the nominal image dimensions (cinfo->image_width and
-cinfo->image_height) are 101x101 pixels. Then jpeg_start_compress() will
-compute downsampled_width = 101 and width_in_blocks = 13 for Y,
-downsampled_width = 51 and width_in_blocks = 7 for Cb and Cr (and the same
-for the height fields). You must pad the Y data to at least 13*8 = 104
-columns and rows, the Cb/Cr data to at least 7*8 = 56 columns and rows. The
-MCU height is max_v_samp_factor = 2 DCT rows so you must pass at least 16
-scanlines on each call to jpeg_write_raw_data(), which is to say 16 actual
-sample rows of Y and 8 each of Cb and Cr. A total of 7 MCU rows are needed,
-so you must pass a total of 7*16 = 112 "scanlines". The last DCT block row
-of Y data is dummy, so it doesn't matter what you pass for it in the data
-arrays, but the scanlines count must total up to 112 so that all of the Cb
-and Cr data gets passed.
-
-Output suspension is supported with raw-data compression: if the data
-destination module suspends, jpeg_write_raw_data() will return 0.
-In this case the same data rows must be passed again on the next call.
-
-
-Decompression with raw data output implies bypassing all postprocessing:
-you cannot ask for rescaling or color quantization, for instance. More
-seriously, you must deal with the color space and sampling factors present in
-the incoming file. If your application only handles, say, 2h1v YCbCr data,
-you must check for and fail on other color spaces or other sampling factors.
-The library will not convert to a different color space for you.
-
-To obtain raw data output, set cinfo->raw_data_out = TRUE before
-jpeg_start_decompress() (it is set FALSE by jpeg_read_header()). Be sure to
-verify that the color space and sampling factors are ones you can handle.
-Then call jpeg_read_raw_data() in place of jpeg_read_scanlines(). The
-decompression process is otherwise the same as usual.
-
-jpeg_read_raw_data() returns one MCU row per call, and thus you must pass a
-buffer of at least max_v_samp_factor*DCTSIZE scanlines (scanline counting is
-the same as for raw-data compression). The buffer you pass must be large
-enough to hold the actual data plus padding to DCT-block boundaries. As with
-compression, any entirely dummy DCT blocks are not processed so you need not
-allocate space for them, but the total scanline count includes them. The
-above example of computing buffer dimensions for raw-data compression is
-equally valid for decompression.
-
-Input suspension is supported with raw-data decompression: if the data source
-module suspends, jpeg_read_raw_data() will return 0. You can also use
-buffered-image mode to read raw data in multiple passes.
-
-
-Really raw data: DCT coefficients
----------------------------------
-
-It is possible to read or write the contents of a JPEG file as raw DCT
-coefficients. This facility is mainly intended for use in lossless
-transcoding between different JPEG file formats. Other possible applications
-include lossless cropping of a JPEG image, lossless reassembly of a
-multi-strip or multi-tile TIFF/JPEG file into a single JPEG datastream, etc.
-
-To read the contents of a JPEG file as DCT coefficients, open the file and do
-jpeg_read_header() as usual. But instead of calling jpeg_start_decompress()
-and jpeg_read_scanlines(), call jpeg_read_coefficients(). This will read the
-entire image into a set of virtual coefficient-block arrays, one array per
-component. The return value is a pointer to an array of virtual-array
-descriptors. Each virtual array can be accessed directly using the JPEG
-memory manager's access_virt_barray method (see Memory management, below,
-and also read structure.doc's discussion of virtual array handling). Or,
-for simple transcoding to a different JPEG file format, the array list can
-just be handed directly to jpeg_write_coefficients().
-
-Each block in the block arrays contains quantized coefficient values in
-normal array order (not JPEG zigzag order). The block arrays contain only
-DCT blocks containing real data; any entirely-dummy blocks added to fill out
-interleaved MCUs at the right or bottom edges of the image are discarded
-during reading and are not stored in the block arrays. (The size of each
-block array can be determined from the width_in_blocks and height_in_blocks
-fields of the component's comp_info entry.) This is also the data format
-expected by jpeg_write_coefficients().
-
-When you are done using the virtual arrays, call jpeg_finish_decompress()
-to release the array storage and return the decompression object to an idle
-state; or just call jpeg_destroy() if you don't need to reuse the object.
-
-If you use a suspending data source, jpeg_read_coefficients() will return
-NULL if it is forced to suspend; a non-NULL return value indicates successful
-completion. You need not test for a NULL return value when using a
-non-suspending data source.
-
-It is also possible to call jpeg_read_coefficients() to obtain access to the
-decoder's coefficient arrays during a normal decode cycle in buffered-image
-mode. This frammish might be useful for progressively displaying an incoming
-image and then re-encoding it without loss. To do this, decode in buffered-
-image mode as discussed previously, then call jpeg_read_coefficients() after
-the last jpeg_finish_output() call. The arrays will be available for your use
-until you call jpeg_finish_decompress().
-
-
-To write the contents of a JPEG file as DCT coefficients, you must provide
-the DCT coefficients stored in virtual block arrays. You can either pass
-block arrays read from an input JPEG file by jpeg_read_coefficients(), or
-allocate virtual arrays from the JPEG compression object and fill them
-yourself. In either case, jpeg_write_coefficients() is substituted for
-jpeg_start_compress() and jpeg_write_scanlines(). Thus the sequence is
- * Create compression object
- * Set all compression parameters as necessary
- * Request virtual arrays if needed
- * jpeg_write_coefficients()
- * jpeg_finish_compress()
- * Destroy or re-use compression object
-jpeg_write_coefficients() is passed a pointer to an array of virtual block
-array descriptors; the number of arrays is equal to cinfo.num_components.
-
-The virtual arrays need only have been requested, not realized, before
-jpeg_write_coefficients() is called. A side-effect of
-jpeg_write_coefficients() is to realize any virtual arrays that have been
-requested from the compression object's memory manager. Thus, when obtaining
-the virtual arrays from the compression object, you should fill the arrays
-after calling jpeg_write_coefficients(). The data is actually written out
-when you call jpeg_finish_compress(); jpeg_write_coefficients() only writes
-the file header.
-
-When writing raw DCT coefficients, it is crucial that the JPEG quantization
-tables and sampling factors match the way the data was encoded, or the
-resulting file will be invalid. For transcoding from an existing JPEG file,
-we recommend using jpeg_copy_critical_parameters(). This routine initializes
-all the compression parameters to default values (like jpeg_set_defaults()),
-then copies the critical information from a source decompression object.
-The decompression object should have just been used to read the entire
-JPEG input file --- that is, it should be awaiting jpeg_finish_decompress().
-
-jpeg_write_coefficients() marks all tables stored in the compression object
-as needing to be written to the output file (thus, it acts like
-jpeg_start_compress(cinfo, TRUE)). This is for safety's sake, to avoid
-emitting abbreviated JPEG files by accident. If you really want to emit an
-abbreviated JPEG file, call jpeg_suppress_tables(), or set the tables'
-individual sent_table flags, between calling jpeg_write_coefficients() and
-jpeg_finish_compress().
-
-
-Progress monitoring
--------------------
-
-Some applications may need to regain control from the JPEG library every so
-often. The typical use of this feature is to produce a percent-done bar or
-other progress display. (For a simple example, see cjpeg.c or djpeg.c.)
-Although you do get control back frequently during the data-transferring pass
-(the jpeg_read_scanlines or jpeg_write_scanlines loop), any additional passes
-will occur inside jpeg_finish_compress or jpeg_start_decompress; those
-routines may take a long time to execute, and you don't get control back
-until they are done.
-
-You can define a progress-monitor routine which will be called periodically
-by the library. No guarantees are made about how often this call will occur,
-so we don't recommend you use it for mouse tracking or anything like that.
-At present, a call will occur once per MCU row, scanline, or sample row
-group, whichever unit is convenient for the current processing mode; so the
-wider the image, the longer the time between calls. During the data
-transferring pass, only one call occurs per call of jpeg_read_scanlines or
-jpeg_write_scanlines, so don't pass a large number of scanlines at once if
-you want fine resolution in the progress count. (If you really need to use
-the callback mechanism for time-critical tasks like mouse tracking, you could
-insert additional calls inside some of the library's inner loops.)
-
-To establish a progress-monitor callback, create a struct jpeg_progress_mgr,
-fill in its progress_monitor field with a pointer to your callback routine,
-and set cinfo->progress to point to the struct. The callback will be called
-whenever cinfo->progress is non-NULL. (This pointer is set to NULL by
-jpeg_create_compress or jpeg_create_decompress; the library will not change
-it thereafter. So if you allocate dynamic storage for the progress struct,
-make sure it will live as long as the JPEG object does. Allocating from the
-JPEG memory manager with lifetime JPOOL_PERMANENT will work nicely.) You
-can use the same callback routine for both compression and decompression.
-
-The jpeg_progress_mgr struct contains four fields which are set by the library:
- long pass_counter; /* work units completed in this pass */
- long pass_limit; /* total number of work units in this pass */
- int completed_passes; /* passes completed so far */
- int total_passes; /* total number of passes expected */
-During any one pass, pass_counter increases from 0 up to (not including)
-pass_limit; the step size is usually but not necessarily 1. The pass_limit
-value may change from one pass to another. The expected total number of
-passes is in total_passes, and the number of passes already completed is in
-completed_passes. Thus the fraction of work completed may be estimated as
- completed_passes + (pass_counter/pass_limit)
- --------------------------------------------
- total_passes
-ignoring the fact that the passes may not be equal amounts of work.
-
-When decompressing, pass_limit can even change within a pass, because it
-depends on the number of scans in the JPEG file, which isn't always known in
-advance. The computed fraction-of-work-done may jump suddenly (if the library
-discovers it has overestimated the number of scans) or even decrease (in the
-opposite case). It is not wise to put great faith in the work estimate.
-
-When using the decompressor's buffered-image mode, the progress monitor work
-estimate is likely to be completely unhelpful, because the library has no way
-to know how many output passes will be demanded of it. Currently, the library
-sets total_passes based on the assumption that there will be one more output
-pass if the input file end hasn't yet been read (jpeg_input_complete() isn't
-TRUE), but no more output passes if the file end has been reached when the
-output pass is started. This means that total_passes will rise as additional
-output passes are requested. If you have a way of determining the input file
-size, estimating progress based on the fraction of the file that's been read
-will probably be more useful than using the library's value.
-
-
-Memory management
------------------
-
-This section covers some key facts about the JPEG library's built-in memory
-manager. For more info, please read structure.doc's section about the memory
-manager, and consult the source code if necessary.
-
-All memory and temporary file allocation within the library is done via the
-memory manager. If necessary, you can replace the "back end" of the memory
-manager to control allocation yourself (for example, if you don't want the
-library to use malloc() and free() for some reason).
-
-Some data is allocated "permanently" and will not be freed until the JPEG
-object is destroyed. Most data is allocated "per image" and is freed by
-jpeg_finish_compress, jpeg_finish_decompress, or jpeg_abort. You can call the
-memory manager yourself to allocate structures that will automatically be
-freed at these times. Typical code for this is
- ptr = (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, size);
-Use JPOOL_PERMANENT to get storage that lasts as long as the JPEG object.
-Use alloc_large instead of alloc_small for anything bigger than a few Kbytes.
-There are also alloc_sarray and alloc_barray routines that automatically
-build 2-D sample or block arrays.
-
-The library's minimum space requirements to process an image depend on the
-image's width, but not on its height, because the library ordinarily works
-with "strip" buffers that are as wide as the image but just a few rows high.
-Some operating modes (eg, two-pass color quantization) require full-image
-buffers. Such buffers are treated as "virtual arrays": only the current strip
-need be in memory, and the rest can be swapped out to a temporary file.
-
-If you use the simplest memory manager back end (jmemnobs.c), then no
-temporary files are used; virtual arrays are simply malloc()'d. Images bigger
-than memory can be processed only if your system supports virtual memory.
-The other memory manager back ends support temporary files of various flavors
-and thus work in machines without virtual memory. They may also be useful on
-Unix machines if you need to process images that exceed available swap space.
-
-When using temporary files, the library will make the in-memory buffers for
-its virtual arrays just big enough to stay within a "maximum memory" setting.
-Your application can set this limit by setting cinfo->mem->max_memory_to_use
-after creating the JPEG object. (Of course, there is still a minimum size for
-the buffers, so the max-memory setting is effective only if it is bigger than
-the minimum space needed.) If you allocate any large structures yourself, you
-must allocate them before jpeg_start_compress() or jpeg_start_decompress() in
-order to have them counted against the max memory limit. Also keep in mind
-that space allocated with alloc_small() is ignored, on the assumption that
-it's too small to be worth worrying about; so a reasonable safety margin
-should be left when setting max_memory_to_use.
-
-If you use the jmemname.c or jmemdos.c memory manager back end, it is
-important to clean up the JPEG object properly to ensure that the temporary
-files get deleted. (This is especially crucial with jmemdos.c, where the
-"temporary files" may be extended-memory segments; if they are not freed,
-DOS will require a reboot to recover the memory.) Thus, with these memory
-managers, it's a good idea to provide a signal handler that will trap any
-early exit from your program. The handler should call either jpeg_abort()
-or jpeg_destroy() for any active JPEG objects. A handler is not needed with
-jmemnobs.c, and shouldn't be necessary with jmemansi.c or jmemmac.c either,
-since the C library is supposed to take care of deleting files made with
-tmpfile().
-
-
-Memory usage
-------------
-
-Working memory requirements while performing compression or decompression
-depend on image dimensions, image characteristics (such as colorspace and
-JPEG process), and operating mode (application-selected options).
-
-As of v6b, the decompressor requires:
- 1. About 24K in more-or-less-fixed-size data. This varies a bit depending
- on operating mode and image characteristics (particularly color vs.
- grayscale), but it doesn't depend on image dimensions.
- 2. Strip buffers (of size proportional to the image width) for IDCT and
- upsampling results. The worst case for commonly used sampling factors
- is about 34 bytes * width in pixels for a color image. A grayscale image
- only needs about 8 bytes per pixel column.
- 3. A full-image DCT coefficient buffer is needed to decode a multi-scan JPEG
- file (including progressive JPEGs), or whenever you select buffered-image
- mode. This takes 2 bytes/coefficient. At typical 2x2 sampling, that's
- 3 bytes per pixel for a color image. Worst case (1x1 sampling) requires
- 6 bytes/pixel. For grayscale, figure 2 bytes/pixel.
- 4. To perform 2-pass color quantization, the decompressor also needs a
- 128K color lookup table and a full-image pixel buffer (3 bytes/pixel).
-This does not count any memory allocated by the application, such as a
-buffer to hold the final output image.
-
-The above figures are valid for 8-bit JPEG data precision and a machine with
-32-bit ints. For 12-bit JPEG data, double the size of the strip buffers and
-quantization pixel buffer. The "fixed-size" data will be somewhat smaller
-with 16-bit ints, larger with 64-bit ints. Also, CMYK or other unusual
-color spaces will require different amounts of space.
-
-The full-image coefficient and pixel buffers, if needed at all, do not
-have to be fully RAM resident; you can have the library use temporary
-files instead when the total memory usage would exceed a limit you set.
-(But if your OS supports virtual memory, it's probably better to just use
-jmemnobs and let the OS do the swapping.)
-
-The compressor's memory requirements are similar, except that it has no need
-for color quantization. Also, it needs a full-image DCT coefficient buffer
-if Huffman-table optimization is asked for, even if progressive mode is not
-requested.
-
-If you need more detailed information about memory usage in a particular
-situation, you can enable the MEM_STATS code in jmemmgr.c.
-
-
-Library compile-time options
-----------------------------
-
-A number of compile-time options are available by modifying jmorecfg.h.
-
-The JPEG standard provides for both the baseline 8-bit DCT process and
-a 12-bit DCT process. The IJG code supports 12-bit lossy JPEG if you define
-BITS_IN_JSAMPLE as 12 rather than 8. Note that this causes JSAMPLE to be
-larger than a char, so it affects the surrounding application's image data.
-The sample applications cjpeg and djpeg can support 12-bit mode only for PPM
-and GIF file formats; you must disable the other file formats to compile a
-12-bit cjpeg or djpeg. (install.doc has more information about that.)
-At present, a 12-bit library can handle *only* 12-bit images, not both
-precisions. (If you need to include both 8- and 12-bit libraries in a single
-application, you could probably do it by defining NEED_SHORT_EXTERNAL_NAMES
-for just one of the copies. You'd have to access the 8-bit and 12-bit copies
-from separate application source files. This is untested ... if you try it,
-we'd like to hear whether it works!)
-
-Note that a 12-bit library always compresses in Huffman optimization mode,
-in order to generate valid Huffman tables. This is necessary because our
-default Huffman tables only cover 8-bit data. If you need to output 12-bit
-files in one pass, you'll have to supply suitable default Huffman tables.
-You may also want to supply your own DCT quantization tables; the existing
-quality-scaling code has been developed for 8-bit use, and probably doesn't
-generate especially good tables for 12-bit.
-
-The maximum number of components (color channels) in the image is determined
-by MAX_COMPONENTS. The JPEG standard allows up to 255 components, but we
-expect that few applications will need more than four or so.
-
-On machines with unusual data type sizes, you may be able to improve
-performance or reduce memory space by tweaking the various typedefs in
-jmorecfg.h. In particular, on some RISC CPUs, access to arrays of "short"s
-is quite slow; consider trading memory for speed by making JCOEF, INT16, and
-UINT16 be "int" or "unsigned int". UINT8 is also a candidate to become int.
-You probably don't want to make JSAMPLE be int unless you have lots of memory
-to burn.
-
-You can reduce the size of the library by compiling out various optional
-functions. To do this, undefine xxx_SUPPORTED symbols as necessary.
-
-You can also save a few K by not having text error messages in the library;
-the standard error message table occupies about 5Kb. This is particularly
-reasonable for embedded applications where there's no good way to display
-a message anyway. To do this, remove the creation of the message table
-(jpeg_std_message_table[]) from jerror.c, and alter format_message to do
-something reasonable without it. You could output the numeric value of the
-message code number, for example. If you do this, you can also save a couple
-more K by modifying the TRACEMSn() macros in jerror.h to expand to nothing;
-you don't need trace capability anyway, right?
-
-
-Portability considerations
---------------------------
-
-The JPEG library has been written to be extremely portable; the sample
-applications cjpeg and djpeg are slightly less so. This section summarizes
-the design goals in this area. (If you encounter any bugs that cause the
-library to be less portable than is claimed here, we'd appreciate hearing
-about them.)
-
-The code works fine on ANSI C, C++, and pre-ANSI C compilers, using any of
-the popular system include file setups, and some not-so-popular ones too.
-See install.doc for configuration procedures.
-
-The code is not dependent on the exact sizes of the C data types. As
-distributed, we make the assumptions that
- char is at least 8 bits wide
- short is at least 16 bits wide
- int is at least 16 bits wide
- long is at least 32 bits wide
-(These are the minimum requirements of the ANSI C standard.) Wider types will
-work fine, although memory may be used inefficiently if char is much larger
-than 8 bits or short is much bigger than 16 bits. The code should work
-equally well with 16- or 32-bit ints.
-
-In a system where these assumptions are not met, you may be able to make the
-code work by modifying the typedefs in jmorecfg.h. However, you will probably
-have difficulty if int is less than 16 bits wide, since references to plain
-int abound in the code.
-
-char can be either signed or unsigned, although the code runs faster if an
-unsigned char type is available. If char is wider than 8 bits, you will need
-to redefine JOCTET and/or provide custom data source/destination managers so
-that JOCTET represents exactly 8 bits of data on external storage.
-
-The JPEG library proper does not assume ASCII representation of characters.
-But some of the image file I/O modules in cjpeg/djpeg do have ASCII
-dependencies in file-header manipulation; so does cjpeg's select_file_type()
-routine.
-
-The JPEG library does not rely heavily on the C library. In particular, C
-stdio is used only by the data source/destination modules and the error
-handler, all of which are application-replaceable. (cjpeg/djpeg are more
-heavily dependent on stdio.) malloc and free are called only from the memory
-manager "back end" module, so you can use a different memory allocator by
-replacing that one file.
-
-The code generally assumes that C names must be unique in the first 15
-characters. However, global function names can be made unique in the
-first 6 characters by defining NEED_SHORT_EXTERNAL_NAMES.
-
-More info about porting the code may be gleaned by reading jconfig.doc,
-jmorecfg.h, and jinclude.h.
-
-
-Notes for MS-DOS implementors
------------------------------
-
-The IJG code is designed to work efficiently in 80x86 "small" or "medium"
-memory models (i.e., data pointers are 16 bits unless explicitly declared
-"far"; code pointers can be either size). You may be able to use small
-model to compile cjpeg or djpeg by itself, but you will probably have to use
-medium model for any larger application. This won't make much difference in
-performance. You *will* take a noticeable performance hit if you use a
-large-data memory model (perhaps 10%-25%), and you should avoid "huge" model
-if at all possible.
-
-The JPEG library typically needs 2Kb-3Kb of stack space. It will also
-malloc about 20K-30K of near heap space while executing (and lots of far
-heap, but that doesn't count in this calculation). This figure will vary
-depending on selected operating mode, and to a lesser extent on image size.
-There is also about 5Kb-6Kb of constant data which will be allocated in the
-near data segment (about 4Kb of this is the error message table).
-Thus you have perhaps 20K available for other modules' static data and near
-heap space before you need to go to a larger memory model. The C library's
-static data will account for several K of this, but that still leaves a good
-deal for your needs. (If you are tight on space, you could reduce the sizes
-of the I/O buffers allocated by jdatasrc.c and jdatadst.c, say from 4K to
-1K. Another possibility is to move the error message table to far memory;
-this should be doable with only localized hacking on jerror.c.)
-
-About 2K of the near heap space is "permanent" memory that will not be
-released until you destroy the JPEG object. This is only an issue if you
-save a JPEG object between compression or decompression operations.
-
-Far data space may also be a tight resource when you are dealing with large
-images. The most memory-intensive case is decompression with two-pass color
-quantization, or single-pass quantization to an externally supplied color
-map. This requires a 128Kb color lookup table plus strip buffers amounting
-to about 40 bytes per column for typical sampling ratios (eg, about 25600
-bytes for a 640-pixel-wide image). You may not be able to process wide
-images if you have large data structures of your own.
-
-Of course, all of these concerns vanish if you use a 32-bit flat-memory-model
-compiler, such as DJGPP or Watcom C. We highly recommend flat model if you
-can use it; the JPEG library is significantly faster in flat model.
diff --git a/libjpegtwrp/ltconfig b/libjpegtwrp/ltconfig
deleted file mode 100755
index 2347e6943..000000000
--- a/libjpegtwrp/ltconfig
+++ /dev/null
@@ -1,1512 +0,0 @@
-#! /bin/sh
-
-# ltconfig - Create a system-specific libtool.
-# Copyright (C) 1996-1998 Free Software Foundation, Inc.
-# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A lot of this script is taken from autoconf-2.10.
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi
-
-echo=echo
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then :
-else
- # The Solaris and AIX default echo program unquotes backslashes.
- # This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- # So, we emulate echo with printf '%s\n'
- echo="printf %s\\n"
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then :
- else
- # Oops. We have no working printf. Try to find a not-so-buggy echo.
- echo=echo
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH /usr/ucb; do
- if test -f $dir/echo && test "X`$dir/echo '\t'`" = 'X\t'; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$save_ifs"
- fi
-fi
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-
-# The name of this program.
-progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
-
-# Constants:
-PROGRAM=ltconfig
-PACKAGE=libtool
-VERSION=1.2
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS 1>&5'
-rm="rm -f"
-
-help="Try \`$progname --help' for more information."
-
-# Global variables:
-can_build_shared=yes
-enable_shared=yes
-# All known linkers require a `.a' archive for static linking.
-enable_static=yes
-ltmain=
-silent=
-srcdir=
-ac_config_guess=
-ac_config_sub=
-host=
-nonopt=
-verify_host=yes
-with_gcc=no
-with_gnu_ld=no
-
-old_AR="$AR"
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-old_CPPFLAGS="$CPPFLAGS"
-old_LD="$LD"
-old_LN_S="$LN_S"
-old_NM="$NM"
-old_RANLIB="$RANLIB"
-
-# Parse the command line options.
-args=
-prev=
-for option
-do
- case "$option" in
- -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
- esac
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- eval "$prev=\$option"
- prev=
- continue
- fi
-
- case "$option" in
- --help) cat <<EOM
-Usage: $progname [OPTION]... LTMAIN [HOST]
-
-Generate a system-specific libtool script.
-
- --disable-shared do not build shared libraries
- --disable-static do not build static libraries
- --help display this help and exit
- --no-verify do not verify that HOST is a valid host type
- --quiet same as \`--silent'
- --silent do not print informational messages
- --srcdir=DIR find \`config.guess' in DIR
- --version output version information and exit
- --with-gcc assume that the GNU C compiler will be used
- --with-gnu-ld assume that the C compiler uses the GNU linker
-
-LTMAIN is the \`ltmain.sh' shell script fragment that provides basic libtool
-functionality.
-
-HOST is the canonical host system name [default=guessed].
-EOM
- exit 0
- ;;
-
- --disable-shared) enable_shared=no ;;
-
- --disable-static) enable_static=no ;;
-
- --quiet | --silent) silent=yes ;;
-
- --srcdir) prev=srcdir ;;
- --srcdir=*) srcdir="$optarg" ;;
-
- --no-verify) verify_host=no ;;
-
- --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION"; exit 0 ;;
-
- --with-gcc) with_gcc=yes ;;
- --with-gnu-ld) with_gnu_ld=yes ;;
-
- -*)
- echo "$progname: unrecognized option \`$option'" 1>&2
- echo "$help" 1>&2
- exit 1
- ;;
-
- *)
- if test -z "$ltmain"; then
- ltmain="$option"
- elif test -z "$host"; then
-# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
-# if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
-# echo "$progname: warning \`$option' is not a valid host type" 1>&2
-# fi
- host="$option"
- else
- echo "$progname: too many arguments" 1>&2
- echo "$help" 1>&2
- exit 1
- fi ;;
- esac
-done
-
-if test -z "$ltmain"; then
- echo "$progname: you must specify a LTMAIN file" 1>&2
- echo "$help" 1>&2
- exit 1
-fi
-
-if test -f "$ltmain"; then :
-else
- echo "$progname: \`$ltmain' does not exist" 1>&2
- echo "$help" 1>&2
- exit 1
-fi
-
-# Quote any args containing shell metacharacters.
-ltconfig_args=
-for arg
-do
- case "$arg" in
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
- ltconfig_args="$ltconfig_args '$arg'" ;;
- *) ltconfig_args="$ltconfig_args $arg" ;;
- esac
-done
-
-# A relevant subset of AC_INIT.
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 5 compiler messages saved in config.log
-# 6 checking for... messages and results
-if test "$silent" = yes; then
- exec 6>/dev/null
-else
- exec 6>&1
-fi
-exec 5>>./config.log
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
-
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
- ac_n= ac_c='
-' ac_t=' '
- else
- ac_n=-n ac_c= ac_t=
- fi
-else
- ac_n= ac_c='\c' ac_t=
-fi
-
-if test -z "$srcdir"; then
- # Assume the source directory is the same one as the path to ltmain.sh.
- srcdir=`$echo "$ltmain" | $Xsed -e 's%/[^/]*$%%'`
- test "$srcdir" = "$ltmain" && srcdir=.
-fi
-
-trap "$rm conftest*; exit 1" 1 2 15
-if test "$verify_host" = yes; then
- # Check for config.guess and config.sub.
- ac_aux_dir=
- for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/config.guess; then
- ac_aux_dir=$ac_dir
- break
- fi
- done
- if test -z "$ac_aux_dir"; then
- echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
- echo "$help" 1>&2
- exit 1
- fi
- ac_config_guess=$ac_aux_dir/config.guess
- ac_config_sub=$ac_aux_dir/config.sub
-
- # Make sure we can run config.sub.
- if $ac_config_sub sun4 >/dev/null 2>&1; then :
- else
- echo "$progname: cannot run $ac_config_sub" 1>&2
- echo "$help" 1>&2
- exit 1
- fi
-
- echo $ac_n "checking host system type""... $ac_c" 1>&6
-
- host_alias=$host
- case "$host_alias" in
- "")
- if host_alias=`$ac_config_guess`; then :
- else
- echo "$progname: cannot guess host type; you must specify one" 1>&2
- echo "$help" 1>&2
- exit 1
- fi ;;
- esac
- host=`$ac_config_sub $host_alias`
- echo "$ac_t$host" 1>&6
-
- # Make sure the host verified.
- test -z "$host" && exit 1
-
-elif test -z "$host"; then
- echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
- echo "$help" 1>&2
- exit 1
-else
- host_alias=$host
-fi
-
-# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
-case "$host_os" in
-linux-gnu*) ;;
-linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
-esac
-
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-case "$host_os" in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "${COLLECT_NAMES+set}" != set; then
- COLLECT_NAMES=
- export COLLECT_NAMES
- fi
- ;;
-esac
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR cru $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-# Set a sane default for `AR'.
-test -z "$AR" && AR=ar
-
-# If RANLIB is not set, then run the test.
-if test "${RANLIB+set}" != "set"; then
- result=no
-
- echo $ac_n "checking for ranlib... $ac_c" 1>&6
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/ranlib; then
- RANLIB="ranlib"
- result="ranlib"
- break
- fi
- done
- IFS="$save_ifs"
-
- echo "$ac_t$result" 1>&6
-fi
-
-if test -n "$RANLIB"; then
- old_archive_cmds="$old_archive_cmds;\$RANLIB \$oldlib"
- old_postinstall_cmds="\$RANLIB \$oldlib;$old_postinstall_cmds"
-fi
-
-# Check to see if we are using GCC.
-if test "$with_gcc" != yes || test -z "$CC"; then
- # If CC is not set, then try to find GCC or a usable CC.
- if test -z "$CC"; then
- echo $ac_n "checking for gcc... $ac_c" 1>&6
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- IFS="$save_ifs"
- test -z "$dir" && dir=.
- if test -f $dir/gcc; then
- CC="gcc"
- break
- fi
- done
- IFS="$save_ifs"
-
- if test -n "$CC"; then
- echo "$ac_t$CC" 1>&6
- else
- echo "$ac_t"no 1>&6
- fi
- fi
-
- # Not "gcc", so try "cc", rejecting "/usr/ucb/cc".
- if test -z "$CC"; then
- echo $ac_n "checking for cc... $ac_c" 1>&6
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- cc_rejected=no
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/cc; then
- if test "$dir/cc" = "/usr/ucb/cc"; then
- cc_rejected=yes
- continue
- fi
- CC="cc"
- break
- fi
- done
- IFS="$save_ifs"
- if test $cc_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $CC
- shift
- if test $# -gt 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same name, so the bogon will be chosen
- # first if we set CC to just the name; use the full file name.
- shift
- set dummy "$dir/cc" "$@"
- shift
- CC="$@"
- fi
- fi
-
- if test -n "$CC"; then
- echo "$ac_t$CC" 1>&6
- else
- echo "$ac_t"no 1>&6
- fi
-
- if test -z "$CC"; then
- echo "$progname: error: no acceptable cc found in \$PATH" 1>&2
- exit 1
- fi
- fi
-
- # Now see if the compiler is really GCC.
- with_gcc=no
- echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6
- echo "$progname:424: checking whether we are using GNU C" >&5
-
- $rm conftest.c
- cat > conftest.c <<EOF
-#ifdef __GNUC__
- yes;
-#endif
-EOF
- if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:432: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
- with_gcc=yes
- fi
- $rm conftest.c
- echo "$ac_t$with_gcc" 1>&6
-fi
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="$2"
-
-echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
-pic_flag=
-special_shlib_compile_flags=
-wl=
-link_static_flag=
-no_builtin_flag=
-
-if test "$with_gcc" = yes; then
- wl='-Wl,'
- link_static_flag='-static'
- no_builtin_flag=' -fno-builtin'
-
- case "$host_os" in
- aix3* | aix4* | irix5* | irix6* | osf3* | osf4*)
- # PIC is the default for these OSes.
- ;;
- os2*)
- # We can build DLLs from non-PIC.
- ;;
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- pic_flag='-m68020 -resident32 -malways-restore-a4'
- ;;
- *)
- pic_flag='-fPIC'
- ;;
- esac
-else
- # PORTME Check for PIC flags for the system compiler.
- case "$host_os" in
- aix3* | aix4*)
- # All AIX code is PIC.
- link_static_flag='-bnso -bI:/lib/syscalls.exp'
- ;;
-
- hpux9* | hpux10*)
- # Is there a better link_static_flag that works with the bundled CC?
- wl='-Wl,'
- link_static_flag="${wl}-a ${wl}archive"
- pic_flag='+Z'
- ;;
-
- irix5* | irix6*)
- wl='-Wl,'
- link_static_flag='-non_shared'
- # PIC (with -KPIC) is the default.
- ;;
-
- os2*)
- # We can build DLLs from non-PIC.
- ;;
-
- osf3* | osf4*)
- # All OSF/1 code is PIC.
- wl='-Wl,'
- link_static_flag='-non_shared'
- ;;
-
- sco3.2v5*)
- pic_flag='-Kpic'
- link_static_flag='-dn'
- special_shlib_compile_flags='-belf'
- ;;
-
- solaris2*)
- pic_flag='-KPIC'
- link_static_flag='-Bstatic'
- wl='-Wl,'
- ;;
-
- sunos4*)
- pic_flag='-PIC'
- link_static_flag='-Bstatic'
- wl='-Qoption ld '
- ;;
-
- sysv4.2uw2*)
- pic_flag='-KPIC'
- link_static_flag='-Bstatic'
- wl='-Wl,'
- ;;
-
- uts4*)
- pic_flag='-pic'
- link_static_flag='-Bstatic'
- ;;
-
- *)
- can_build_shared=no
- ;;
- esac
-fi
-
-if test -n "$pic_flag"; then
- echo "$ac_t$pic_flag" 1>&6
-
- # Check to make sure the pic_flag actually works.
- echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6
- $rm conftest*
- echo > conftest.c
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $pic_flag -DPIC"
- echo "$progname:547: checking if $compiler PIC flag $pic_flag works" >&5
- if { (eval echo $progname:548: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then
- # Append any warnings to the config.log.
- cat conftest.err 1>&5
-
- # On HP-UX, both CC and GCC only warn that PIC is supported... then they
- # create non-PIC objects. So, if there were any warnings, we assume that
- # PIC is not supported.
- if test -s conftest.err; then
- echo "$ac_t"no 1>&6
- can_build_shared=no
- pic_flag=
- else
- echo "$ac_t"yes 1>&6
- pic_flag=" $pic_flag"
- fi
- else
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- can_build_shared=no
- pic_flag=
- echo "$ac_t"no 1>&6
- fi
- CFLAGS="$save_CFLAGS"
- $rm conftest*
-else
- echo "$ac_t"none 1>&6
-fi
-
-# Check for any special shared library compilation flags.
-if test -n "$special_shlib_compile_flags"; then
- echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2
- if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$special_shlib_compile_flags[ ]" >/dev/null; then :
- else
- echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2
- can_build_shared=no
- fi
-fi
-
-echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6
-$rm conftest*
-echo 'main(){return(0);}' > conftest.c
-save_LDFLAGS="$LDFLAGS"
-LDFLAGS="$LDFLAGS $link_static_flag"
-echo "$progname:591: checking if $compiler static flag $link_static_flag works" >&5
-if { (eval echo $progname:592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- echo "$ac_t$link_static_flag" 1>&6
-else
- echo "$ac_t"none 1>&6
- link_static_flag=
-fi
-LDFLAGS="$save_LDFLAGS"
-$rm conftest*
-
-if test -z "$LN_S"; then
- # Check to see if we can use ln -s, or we need hard links.
- echo $ac_n "checking whether ln -s works... $ac_c" 1>&6
- $rm conftestdata
- if ln -s X conftestdata 2>/dev/null; then
- $rm conftestdata
- LN_S="ln -s"
- else
- LN_S=ln
- fi
- if test "$LN_S" = "ln -s"; then
- echo "$ac_t"yes 1>&6
- else
- echo "$ac_t"no 1>&6
- fi
-fi
-
-# Make sure LD is an absolute path.
-if test -z "$LD"; then
- ac_prog=ld
- if test "$with_gcc" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6
- echo "$progname:624: checking for ld used by GCC" >&5
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
- # Accept absolute paths.
- /* | [A-Za-z]:\\*)
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we are not using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
- elif test "$with_gnu_ld" = yes; then
- echo $ac_n "checking for GNU ld... $ac_c" 1>&6
- echo "$progname:642: checking for GNU ld" >&5
- else
- echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
- echo "$progname:645: checking for non-GNU ld" >&5
- fi
-
- if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
- LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
- fi
-
- if test -n "$LD"; then
- echo "$ac_t$LD" 1>&6
- else
- echo "$ac_t"no 1>&6
- fi
-
- if test -z "$LD"; then
- echo "$progname: error: no acceptable ld found in \$PATH" 1>&2
- exit 1
- fi
-fi
-
-# Check to see if it really is or is not GNU ld.
-echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6
-# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-echo "$ac_t$with_gnu_ld" 1>&6
-
-# See if the linker supports building shared libraries.
-echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6
-
-allow_undefined_flag=
-no_undefined_flag=
-archive_cmds=
-old_archive_from_new_cmds=
-export_dynamic_flag_spec=
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-hardcode_shlibpath_var=unsupported
-runpath_var=
-
-case "$host_os" in
-amigaos* | sunos4*)
- # On these operating systems, we should treat GNU ld like the system ld.
- gnu_ld_acts_native=yes
- ;;
-*)
- gnu_ld_acts_native=no
- ;;
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes && test "$gnu_ld_acts_native" != yes; then
-
- # See if GNU ld supports shared libraries.
- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared ${wl}-soname $wl$soname -o $lib$libobjs'
- runpath_var=LD_RUN_PATH
- ld_shlibs=yes
- else
- ld_shlibs=no
- fi
-
- if test "$ld_shlibs" = yes; then
- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
- fi
-else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case "$host_os" in
- aix3*)
- allow_undefined_flag=unsupported
- archive_cmds='$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' > $lib.exp;$LD -o $objdir/$soname$libobjs -bE:$lib.exp -T512 -H512 -bM:SRE;$AR cru $lib $objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L=yes
- if test "$with_gcc" = yes && test -z "$link_static_flag"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct=unsupported
- fi
- ;;
-
- aix4*)
- allow_undefined_flag=unsupported
- archive_cmds='$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' > $lib.exp;$CC -o $objdir/$soname$libobjs ${wl}-bE:$lib.exp ${wl}-bM:SRE ${wl}-bnoentry;$AR cru $lib $objdir/$soname'
- hardcode_direct=yes
- hardcode_minus_L=yes
- ;;
-
- amigaos*)
- archive_cmds='$rm $objdir/a2ixlibrary.data;$echo "#define NAME $libname" > $objdir/a2ixlibrary.data;$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data;$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data;$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data;$AR cru $lib$libobjs;$RANLIB $lib;(cd $objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds='$LD -Bshareable -o $lib$libobjs /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- archive_cmds='$LD -Bshareable -o $lib$libobjs'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- # FreeBSD 3, at last, uses gcc -shared to do shared libraries.
- freebsd3*)
- archive_cmds='$CC -shared -o $lib$libobjs'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- hpux9*)
- archive_cmds='$rm $objdir/$soname;$LD -b +s +b $install_libdir -o $objdir/$soname$libobjs;mv $objdir/$soname $lib'
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- export_dynamic_flag_spec='${wl}-E'
- ;;
-
- hpux10*)
- archive_cmds='$LD -b +h $soname +s +b $install_libdir -o $lib$libobjs'
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- export_dynamic_flag_spec='${wl}-E'
- ;;
-
- irix5* | irix6*)
- archive_cmds='$LD -shared -o $lib -soname $soname -set_version $verstring$libobjs'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- ;;
-
- netbsd*)
- # Tested with NetBSD 1.2 ld
- archive_cmds='$LD -Bshareable -o $lib$libobjs'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- openbsd*)
- archive_cmds='$LD -Bshareable -o $lib$libobjs'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- os2*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- allow_undefined_flag=unsupported
- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def;$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def;$echo DATA >> $objdir/$libname.def;$echo " SINGLE NONSHARED" >> $objdir/$libname.def;$echo EXPORTS >> $objdir/$libname.def;emxexp$libobjs >> $objdir/$libname.def;$CC -Zdll -Zcrtdll -o $lib$libobjs $objdir/$libname.def'
- old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def'
- ;;
-
- osf3* | osf4*)
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} -o $lib -soname $soname -set_version $verstring$libobjs$deplibs'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
-
- sco3.2v5*)
- archive_cmds='$LD -G -o $lib$libobjs'
- hardcode_direct=yes
- ;;
-
- solaris2*)
- no_undefined_flag=' -z text'
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib$libobjs'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_shlibpath_var=no
-
- # Solaris 2 before 2.5 hardcodes -L paths.
- case "$host_os" in
- solaris2.[0-4]*)
- hardcode_minus_L=yes
- ;;
- esac
- ;;
-
- sunos4*)
- if test "$with_gcc" = yes; then
- archive_cmds='$CC -shared -o $lib$libobjs'
- else
- archive_cmds='$LD -assert pure-text -Bstatic -o $lib$libobjs'
- fi
-
- if test "$with_gnu_ld" = yes; then
- export_dynamic_flag_spec='${wl}-export-dynamic'
- fi
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- uts4*)
- archive_cmds='$LD -G -h $soname -o $lib$libobjs'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=no
- hardcode_minus_L=no
- hardcode_shlibpath_var=no
- ;;
-
- *)
- ld_shlibs=no
- can_build_shared=no
- ;;
- esac
-fi
-echo "$ac_t$ld_shlibs" 1>&6
-
-if test -z "$NM"; then
- echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6
- case "$NM" in
- /* | [A-Za-z]:\\*) ;; # Let the user override the test with a path.
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- NM="$ac_dir/nm -B"
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- NM="$ac_dir/nm -p"
- else
- NM="$ac_dir/nm"
- fi
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$NM" && NM=nm
- ;;
- esac
- echo "$ac_t$NM" 1>&6
-fi
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRSTU]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \1'
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- symcode='[BCDTU]'
- ;;
-irix*)
- # Cannot use undefined symbols on IRIX because inlined functions mess us up.
- symcode='[BCDEGRST]'
- ;;
-solaris2*)
- symcode='[BDTU]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- symcode='[ABCDGISTUW]'
-fi
-
-# Write the raw and C identifiers.
-global_symbol_pipe="sed -n -e 's/^.* $symcode $sympat$/$symxfrm/p'"
-
-# Check to see that the pipe works correctly.
-pipe_works=no
-$rm conftest*
-cat > conftest.c <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
-echo "$progname:971: checking if global_symbol_pipe works" >&5
-if { (eval echo $progname:972: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.o; then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if { echo "$progname:975: eval \"$NM conftest.o | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.o | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- wcout=`wc "$nlist" 2>/dev/null`
- count=`$echo "X$wcout" | $Xsed -e 's/^[ ]*\([0-9][0-9]*\).*$/\1/'`
- (test "$count" -ge 0) 2>/dev/null || count=-1
- else
- rm -f "$nlist"T
- count=-1
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- sed 's/^.* \(.*\)$/extern char \1;/' < "$nlist" >> conftest.c
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define __ptr_t void *
-#else
-# define __ptr_t char *
-#endif
-
-/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */
-int dld_preloaded_symbol_count = $count;
-
-/* The mapping between symbol names and symbols. */
-struct {
- char *name;
- __ptr_t address;
-}
-dld_preloaded_symbols[] =
-{
-EOF
- sed 's/^\(.*\) \(.*\)$/ {"\1", (__ptr_t) \&\2},/' < "$nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (__ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.o conftestm.o
- save_LIBS="$LIBS"
- save_CFLAGS="$CFLAGS"
- LIBS='conftestm.o'
- CFLAGS="$CFLAGS$no_builtin_flag"
- if { (eval echo $progname:1033: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- pipe_works=yes
- else
- echo "$progname: failed program was:" >&5
- cat conftest.c >&5
- fi
- LIBS="$save_LIBS"
- else
- echo "cannot find nm_test_func in $nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&5
- fi
- else
- echo "cannot run $global_symbol_pipe" >&5
- fi
-else
- echo "$progname: failed program was:" >&5
- cat conftest.c >&5
-fi
-$rm conftest*
-
-# Do not use the global_symbol_pipe unless it works.
-echo "$ac_t$pipe_works" 1>&6
-test "$pipe_works" = yes || global_symbol_pipe=
-
-# Check hardcoding attributes.
-echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
- test -n "$runpath_var"; then
-
- # We can hardcode non-existant directories.
- if test "$hardcode_direct" != no && \
- test "$hardcode_minus_L" != no && \
- test "$hardcode_shlibpath_var" != no; then
-
- # Linking always hardcodes the temporary library directory.
- hardcode_action=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action=immediate
- fi
-elif test "$hardcode_direct" != yes && \
- test "$hardcode_minus_L" != yes && \
- test "$hardcode_shlibpath_var" != yes; then
- # We cannot hardcode anything.
- hardcode_action=unsupported
-else
- # We can only hardcode existing directories.
- hardcode_action=relink
-fi
-echo "$ac_t$hardcode_action" 1>&6
-test "$hardcode_action" = unsupported && can_build_shared=no
-
-
-reload_flag=
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6
-# PORTME Some linker may need a different reload flag.
-reload_flag='-r'
-echo "$ac_t$reload_flag"
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-# PORTME Fill in your ld.so characteristics
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-version_type=none
-dynamic_linker="$host_os ld.so"
-
-echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
-case "$host_os" in
-aix3* | aix4*)
- version_type=linux
- library_names_spec='${libname}${release}.so.$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}.so.$major'
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
- ;;
-
-freebsd2* | freebsd3*)
- version_type=sunos
- library_names_spec='${libname}${release}.so.$versuffix $libname.so'
- finish_cmds='PATH="$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-gnu*)
- version_type=sunos
- library_names_spec='${libname}${release}.so.$versuffix'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-hpux9* | hpux10*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- dynamic_linker="$host_os dld.sl"
- version_type=sunos
- shlibpath_var=SHLIB_PATH
- library_names_spec='${libname}${release}.sl.$versuffix ${libname}${release}.sl.$major $libname.sl'
- soname_spec='${libname}${release}.sl.$major'
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-irix5* | irix6*)
- version_type=osf
- soname_spec='${libname}${release}.so'
- library_names_spec='${libname}${release}.so.$versuffix $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux-gnu*)
- version_type=linux
- library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so'
- soname_spec='${libname}${release}.so.$major'
- finish_cmds='PATH="$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
-
- if test -f /lib/ld.so.1; then
- dynamic_linker='GNU ld.so'
- else
- # Only the GNU ld.so supports shared libraries on MkLinux.
- case "$host_cpu" in
- powerpc*) dynamic_linker=no ;;
- *) dynamic_linker='Linux ld.so' ;;
- esac
- fi
- ;;
-
-netbsd* | openbsd*)
- version_type=sunos
- library_names_spec='${libname}${release}.so.$versuffix'
- finish_cmds='PATH="$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-os2*)
- libname_spec='$name'
- library_names_spec='$libname.dll $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4*)
- version_type=osf
- soname_spec='${libname}${release}.so'
- library_names_spec='${libname}${release}.so.$versuffix $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-sco3.2v5*)
- version_type=osf
- soname_spec='${libname}${release}.so.$major'
- library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-solaris2*)
- version_type=linux
- library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so'
- soname_spec='${libname}${release}.so.$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}.so.$versuffix'
- finish_cmds='PATH="$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-sysv4.2uw2*)
- version_type=linux
- library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so'
- soname_spec='${libname}${release}.so.$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so'
- soname_spec='${libname}${release}.so.$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-echo "$ac_t$dynamic_linker"
-test "$dynamic_linker" = no && can_build_shared=no
-
-# Report the final consequences.
-echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
-
-echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case "$host_os" in
-aix*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds;\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-esac
-
-echo "$ac_t$enable_shared" 1>&6
-
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-
-echo "checking whether to build static libraries... $enable_static" 1>&6
-
-echo $ac_n "checking for objdir... $ac_c" 1>&6
-rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-echo "$ac_t$objdir" 1>&6
-
-# Copy echo and quote the copy, instead of the original, because it is
-# used later.
-ltecho="$echo"
-
-# Now quote all the things that may contain metacharacters.
-for var in ltecho old_CC old_CFLAGS old_CPPFLAGS old_LD old_NM old_RANLIB \
- old_LN_S AR CC LD LN_S NM reload_flag reload_cmds wl pic_flag \
- link_static_flag no_builtin_flag export_dynamic_flag_spec \
- libname_spec library_names_spec soname_spec RANLIB \
- old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
- old_postuninstall_cmds archive_cmds postinstall_cmds postuninstall_cmds \
- allow_undefined_flag no_undefined_flag \
- finish_cmds finish_eval global_symbol_pipe \
- hardcode_libdir_flag_spec hardcode_libdir_separator; do
-
- case "$var" in
- reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | archive_cmds | \
- postinstall_cmds | postuninstall_cmds | finish_cmds)
- # Double-quote double-evaled strings.
- eval "$var=\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\"\`"
- ;;
- *)
- eval "$var=\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`"
- ;;
- esac
-done
-
-ofile=libtool
-trap "$rm $ofile; exit 1" 1 2 15
-echo creating $ofile
-$rm $ofile
-cat <<EOF > $ofile
-#! /bin/sh
-
-# libtool - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM - GNU $PACKAGE $VERSION
-# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
-#
-# Copyright (C) 1996-1998 Free Software Foundation, Inc.
-# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This program was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# CC="$old_CC" CFLAGS="$old_CFLAGS" CPPFLAGS="$old_CPPFLAGS" \\
-# LD="$old_LD" NM="$old_NM" RANLIB="$old_RANLIB" LN_S="$old_LN_S" \\
-# $0$ltconfig_args
-#
-# Compiler and other test output produced by $progname, useful for
-# debugging $progname, is in ./config.log if it exists.
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "\${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi
-
-# An echo program that does not interpret backslashes.
-echo="$ltecho"
-
-# The version of $progname that generated this script.
-LTCONFIG_VERSION="$VERSION"
-
-# Shell to use when invoking shell scripts.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Whether or not to build libtool libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build old-style libraries.
-build_old_libs=$enable_static
-
-# The host system.
-host_alias="$host_alias"
-host="$host"
-
-# The archiver.
-AR="$AR"
-
-# The default C compiler.
-CC="$CC"
-
-# The linker used to build libraries.
-LD="$LD"
-
-# Whether we need hard or soft links.
-LN_S="$LN_S"
-
-# A BSD-compatible nm program.
-NM="$NM"
-
-# The name of the directory that contains temporary libtool files.
-objdir="$objdir"
-
-# How to create reloadable object files.
-reload_flag="$reload_flag"
-reload_cmds="$reload_cmds"
-
-# How to pass a linker flag through the compiler.
-wl="$wl"
-
-# Additional compiler flags for building library objects.
-pic_flag="$pic_flag"
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag="$link_static_flag"
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag="$no_builtin_flag"
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec="$export_dynamic_flag_spec"
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec="$libname_spec"
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec="$library_names_spec"
-
-# The coded name of the library, if different from the real name.
-soname_spec="$soname_spec"
-
-# Commands used to build and install an old-style archive.
-RANLIB="$RANLIB"
-old_archive_cmds="$old_archive_cmds"
-old_postinstall_cmds="$old_postinstall_cmds"
-old_postuninstall_cmds="$old_postuninstall_cmds"
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds="$old_archive_from_new_cmds"
-
-# Commands used to build and install a shared archive.
-archive_cmds="$archive_cmds"
-postinstall_cmds="$postinstall_cmds"
-postuninstall_cmds="$postuninstall_cmds"
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag="$allow_undefined_flag"
-
-# Flag that forces no undefined symbols.
-no_undefined_flag="$no_undefined_flag"
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds="$finish_cmds"
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval="$finish_eval"
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe="$global_symbol_pipe"
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec="$hardcode_libdir_flag_spec"
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator="$hardcode_libdir_separator"
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-EOF
-
-case "$host_os" in
-aix3*)
- cat <<\EOF >> $ofile
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "${COLLECT_NAMES+set}" != set; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-
-EOF
- ;;
-esac
-
-# Append the ltmain.sh script.
-cat "$ltmain" >> $ofile || (rm -f $ofile; exit 1)
-
-chmod +x $ofile
-exit 0
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
diff --git a/libjpegtwrp/ltmain.sh b/libjpegtwrp/ltmain.sh
deleted file mode 100644
index e9350b3fa..000000000
--- a/libjpegtwrp/ltmain.sh
+++ /dev/null
@@ -1,2453 +0,0 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun ltconfig.
-#
-# Copyright (C) 1996-1998 Free Software Foundation, Inc.
-# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# The name of this program.
-progname=`$echo "$0" | sed 's%^.*/%%'`
-modename="$progname"
-
-# Constants.
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.2
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
-
-if test "$LTCONFIG_VERSION" != "$VERSION"; then
- echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit 1
-fi
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- echo "$modename: not configured to build any kind of library" 1>&2
- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit 1
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-
-# Parse our command line options once, thoroughly.
-while test $# -gt 0
-do
- arg="$1"
- shift
-
- case "$arg" in
- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
- *) optarg= ;;
- esac
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case "$prev" in
- execute_dlfiles)
- eval "$prev=\"\$$prev \$arg\""
- ;;
- *)
- eval "$prev=\$arg"
- ;;
- esac
-
- prev=
- prevopt=
- continue
- fi
-
- # Have we seen a non-optional argument yet?
- case "$arg" in
- --help)
- show_help=yes
- ;;
-
- --version)
- echo "$PROGRAM (GNU $PACKAGE) $VERSION"
- exit 0
- ;;
-
- --dry-run | -n)
- run=:
- ;;
-
- --features)
- echo "host: $host"
- if test "$build_libtool_libs" = yes; then
- echo "enable shared libraries"
- else
- echo "disable shared libraries"
- fi
- if test "$build_old_libs" = yes; then
- echo "enable static libraries"
- else
- echo "disable static libraries"
- fi
- exit 0
- ;;
-
- --finish) mode="finish" ;;
-
- --mode) prevopt="--mode" prev=mode ;;
- --mode=*) mode="$optarg" ;;
-
- --quiet | --silent)
- show=:
- ;;
-
- -dlopen)
- prevopt="-dlopen"
- prev=execute_dlfiles
- ;;
-
- -*)
- $echo "$modename: unrecognized option \`$arg'" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
-
- *)
- nonopt="$arg"
- break
- ;;
- esac
-done
-
-if test -n "$prevopt"; then
- $echo "$modename: option \`$prevopt' requires an argument" 1>&2
- $echo "$help" 1>&2
- exit 1
-fi
-
-if test -z "$show_help"; then
-
- # Infer the operation mode.
- if test -z "$mode"; then
- case "$nonopt" in
- *cc | *++ | gcc* | *-gcc*)
- mode=link
- for arg
- do
- case "$arg" in
- -c)
- mode=compile
- break
- ;;
- esac
- done
- ;;
- *db | *dbx)
- mode=execute
- ;;
- *install*|cp|mv)
- mode=install
- ;;
- *rm)
- mode=uninstall
- ;;
- *)
- # If we have no mode, but dlfiles were specified, then do execute mode.
- test -n "$execute_dlfiles" && mode=execute
-
- # Just use the default operation mode.
- if test -z "$mode"; then
- if test -n "$nonopt"; then
- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
- else
- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
- fi
- fi
- ;;
- esac
- fi
-
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$execute_dlfiles" && test "$mode" != execute; then
- $echo "$modename: unrecognized option \`-dlopen'" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$modename --help --mode=$mode' for more information."
-
- # These modes are in order of execution frequency so that they run quickly.
- case "$mode" in
- # libtool compile mode
- compile)
- modename="$modename: compile"
- # Get the compilation command and the source file.
- base_compile=
- lastarg=
- srcfile="$nonopt"
- suppress_output=
-
- for arg
- do
- # Accept any command-line options.
- case "$arg" in
- -o)
- $echo "$modename: you cannot specify the output filename with \`-o'" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
-
- -static)
- build_libtool_libs=no
- build_old_libs=yes
- continue
- ;;
- esac
-
- # Accept the current argument as the source file.
- lastarg="$srcfile"
- srcfile="$arg"
-
- # Aesthetically quote the previous argument.
-
- # Backslashify any backslashes, double quotes, and dollar signs.
- # These are the only characters that are still specially
- # interpreted inside of double-quoted scrings.
- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
- # Double-quote args containing other shell metacharacters.
- # Many Bourne shells cannot handle close brackets correctly in scan
- # sets, so we specify it separately.
- case "$lastarg" in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- lastarg="\"$lastarg\""
- ;;
- esac
-
- # Add the previous argument to base_compile.
- if test -z "$base_compile"; then
- base_compile="$lastarg"
- else
- base_compile="$base_compile $lastarg"
- fi
- done
-
- # Get the name of the library object.
- libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
-
- # Recognize several different file suffixes.
- xform='[cCFSfms]'
- case "$libobj" in
- *.ada) xform=ada ;;
- *.adb) xform=adb ;;
- *.ads) xform=ads ;;
- *.asm) xform=asm ;;
- *.c++) xform=c++ ;;
- *.cc) xform=cc ;;
- *.cpp) xform=cpp ;;
- *.cxx) xform=cxx ;;
- *.f90) xform=f90 ;;
- *.for) xform=for ;;
- esac
-
- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
- case "$libobj" in
- *.lo) obj=`$echo "X$libobj" | $Xsed -e 's/\.lo$/.o/'` ;;
- *)
- $echo "$modename: cannot determine name of library object from \`$srcfile'" 1>&2
- exit 1
- ;;
- esac
-
- if test -z "$base_compile"; then
- $echo "$modename: you must specify a compilation command" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- # Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
- $run $rm $obj $libobj
- trap "$run $rm $obj $libobj; exit 1" 1 2 15
- else
- $run $rm $libobj
- trap "$run $rm $libobj; exit 1" 1 2 15
- fi
-
- # Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
- # Without this assignment, base_compile gets emptied.
- fbsd_hideous_sh_bug=$base_compile
-
- # All platforms use -DPIC, to notify preprocessed assembler code.
- $show "$base_compile$pic_flag -DPIC $srcfile"
- if $run eval "$base_compile\$pic_flag -DPIC \$srcfile"; then :
- else
- test -n "$obj" && $run $rm $obj
- exit 1
- fi
-
- # If we have no pic_flag, then copy the object into place and finish.
- if test -z "$pic_flag"; then
- $show "$LN_S $obj $libobj"
- $run $LN_S $obj $libobj
- exit $?
- fi
-
- # Just move the object, then go on to compile the next one
- $show "$mv $obj $libobj"
- $run $mv $obj $libobj || exit 1
-
- # Allow error messages only from the first compilation.
- suppress_output=' >/dev/null 2>&1'
- fi
-
- # Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- # Suppress compiler output if we already did a PIC compilation.
- $show "$base_compile $srcfile$suppress_output"
- if $run eval "$base_compile \$srcfile$suppress_output"; then :
- else
- $run $rm $obj $libobj
- exit 1
- fi
- fi
-
- # Create an invalid libtool object if no PIC, so that we do not
- # accidentally link it into a program.
- if test "$build_libtool_libs" != yes; then
- $show "echo timestamp > $libobj"
- $run eval "echo timestamp > \$libobj" || exit $?
- fi
-
- exit 0
- ;;
-
- # libtool link mode
- link)
- modename="$modename: link"
- CC="$nonopt"
- allow_undefined=yes
- compile_command="$CC"
- finalize_command="$CC"
-
- compile_shlibpath=
- finalize_shlibpath=
- deplibs=
- dlfiles=
- dlprefiles=
- export_dynamic=no
- hardcode_libdirs=
- libobjs=
- link_against_libtool_libs=
- ltlibs=
- objs=
- prev=
- prevarg=
- release=
- rpath=
- perm_rpath=
- temp_rpath=
- vinfo=
-
- # We need to know -static, to get the right output filenames.
- for arg
- do
- case "$arg" in
- -all-static | -static)
- if test "X$arg" = "X-all-static" && test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
- $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
- fi
- build_libtool_libs=no
- build_old_libs=yes
- break
- ;;
- esac
- done
-
- # See if our shared archives depend on static archives.
- test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
- # Go through the arguments, transforming them on the way.
- for arg
- do
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case "$prev" in
- output)
- compile_command="$compile_command @OUTPUT@"
- finalize_command="$finalize_command @OUTPUT@"
- ;;
- esac
-
- case "$prev" in
- dlfiles|dlprefiles)
- case "$arg" in
- *.la | *.lo) ;; # We handle these cases below.
- *)
- dlprefiles="$dlprefiles $arg"
- test "$prev" = dlfiles && dlfiles="$dlfiles $arg"
- prev=
- ;;
- esac
- ;;
- release)
- release="-$arg"
- prev=
- continue
- ;;
- rpath)
- rpath="$rpath $arg"
- prev=
- continue
- ;;
- *)
- eval "$prev=\"\$arg\""
- prev=
- continue
- ;;
- esac
- fi
-
- prevarg="$arg"
-
- case "$arg" in
- -all-static)
- if test -n "$link_static_flag"; then
- compile_command="$compile_command $link_static_flag"
- finalize_command="$finalize_command $link_static_flag"
- fi
- continue
- ;;
-
- -allow-undefined)
- # FIXME: remove this flag sometime in the future.
- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
- continue
- ;;
-
- -dlopen)
- prev=dlfiles
- continue
- ;;
-
- -dlpreopen)
- prev=dlprefiles
- continue
- ;;
-
- -export-dynamic)
- if test "$export_dynamic" != yes; then
- export_dynamic=yes
- if test -n "$export_dynamic_flag_spec"; then
- eval arg=\"$export_dynamic_flag_spec\"
- else
- arg=
- fi
-
- # Add the symbol object into the linking commands.
- compile_command="$compile_command @SYMFILE@"
- finalize_command="$finalize_command @SYMFILE@"
- fi
- ;;
-
- -L*)
- dir=`$echo "X$arg" | $Xsed -e 's%^-L\(.*\)$%\1%'`
- case "$dir" in
- /* | [A-Za-z]:\\*)
- # Add the corresponding hardcode_libdir_flag, if it is not identical.
- ;;
- *)
- $echo "$modename: \`-L$dir' cannot specify a relative directory" 1>&2
- exit 1
- ;;
- esac
- deplibs="$deplibs $arg"
- ;;
-
- -l*) deplibs="$deplibs $arg" ;;
-
- -no-undefined)
- allow_undefined=no
- continue
- ;;
-
- -o) prev=output ;;
-
- -release)
- prev=release
- continue
- ;;
-
- -rpath)
- prev=rpath
- continue
- ;;
-
- -static)
- # If we have no pic_flag, then this is the same as -all-static.
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- compile_command="$compile_command $link_static_flag"
- finalize_command="$finalize_command $link_static_flag"
- fi
- continue
- ;;
-
- -version-info)
- prev=vinfo
- continue
- ;;
-
- # Some other compiler flag.
- -* | +*)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case "$arg" in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- arg="\"$arg\""
- ;;
- esac
- ;;
-
- *.o | *.a)
- # A standard object.
- objs="$objs $arg"
- ;;
-
- *.lo)
- # A library object.
- if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
- if test "$build_libtool_libs" = yes; then
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e 's/\.lo$/\.o/'`
- prev=
- fi
- libobjs="$libobjs $arg"
- ;;
-
- *.la)
- # A libtool-controlled library.
-
- dlname=
- libdir=
- library_names=
- old_library=
-
- # Check to see that this really is a libtool archive.
- if (sed -e '2q' $arg | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
- exit 1
- fi
-
- # If there is no directory component, then add one.
- case "$arg" in
- */* | *\\*) . $arg ;;
- *) . ./$arg ;;
- esac
-
- if test -z "$libdir"; then
- $echo "$modename: \`$arg' contains no -rpath information" 1>&2
- exit 1
- fi
-
- # Get the name of the library we link against.
- linklib=
- for l in $old_library $library_names; do
- linklib="$l"
- done
-
- if test -z "$linklib"; then
- $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
- exit 1
- fi
-
- # Find the relevant object directory and library name.
- name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
- dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
- if test "X$dir" = "X$arg"; then
- dir="$objdir"
- else
- dir="$dir/$objdir"
- fi
-
- # This library was specified with -dlopen.
- if test "$prev" = dlfiles; then
- dlfiles="$dlfiles $arg"
- if test -z "$dlname"; then
- # If there is no dlname, we need to preload.
- prev=dlprefiles
- else
- # We should not create a dependency on this library, but we
- # may need any libraries it requires.
- compile_command="$compile_command$dependency_libs"
- finalize_command="$finalize_command$dependency_libs"
- prev=
- continue
- fi
- fi
-
- # The library was specified with -dlpreopen.
- if test "$prev" = dlprefiles; then
- # Prefer using a static library (so that no silly _DYNAMIC symbols
- # are required to link).
- if test -n "$old_library"; then
- dlprefiles="$dlprefiles $dir/$old_library"
- else
- dlprefiles="$dlprefiles $dir/$linklib"
- fi
- prev=
- fi
-
- if test "$build_libtool_libs" = yes && test -n "$library_names"; then
- link_against_libtool_libs="$link_against_libtool_libs $arg"
- if test -n "$shlibpath_var"; then
- # Make sure the rpath contains only unique directories.
- case "$temp_rpath " in
- *" $dir "*) ;;
- *) temp_rpath="$temp_rpath $dir" ;;
- esac
- fi
-
- # This is the magic to use -rpath.
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- # Put the magic libdir with the hardcode flag.
- hardcode_libdirs="$libdir"
- libdir="@HARDCODE_LIBDIRS@"
- else
- # Just accumulate the unique libdirs.
- case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- libdir=
- fi
- fi
-
- if test -n "$libdir"; then
- eval flag=\"$hardcode_libdir_flag_spec\"
-
- compile_command="$compile_command $flag"
- finalize_command="$finalize_command $flag"
- fi
- elif test -n "$runpath_var"; then
- # Do the same for the permanent run path.
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
-
-
- case "$hardcode_action" in
- immediate)
- if test "$hardcode_direct" = no; then
- compile_command="$compile_command $dir/$linklib"
- elif test "$hardcode_minus_L" = no; then
- compile_command="$compile_command -L$dir -l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- compile_shlibpath="$compile_shlibpath$dir:"
- compile_command="$compile_command -l$name"
- fi
- ;;
-
- relink)
- # We need an absolute path.
- case "$dir" in
- /* | [A-Za-z]:\\*) ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
- exit 1
- fi
- dir="$absdir"
- ;;
- esac
-
- if test "$hardcode_direct" = yes; then
- compile_command="$compile_command $dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- compile_command="$compile_command -L$dir -l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- compile_shlibpath="$compile_shlibpath$dir:"
- compile_command="$compile_command -l$name"
- fi
- ;;
-
- *)
- $echo "$modename: \`$hardcode_action' is an unknown hardcode action" 1>&2
- exit 1
- ;;
- esac
-
- # Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes; then
- finalize_command="$finalize_command $libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- finalize_command="$finalize_command -L$libdir -l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- finalize_shlibpath="$finalize_shlibpath$libdir:"
- finalize_command="$finalize_command -l$name"
- else
- # We cannot seem to hardcode it, guess we'll fake it.
- finalize_command="$finalize_command -L$libdir -l$name"
- fi
- else
- # Transform directly to old archives if we don't build new libraries.
- if test -n "$pic_flag" && test -z "$old_library"; then
- $echo "$modename: cannot find static library for \`$arg'" 1>&2
- exit 1
- fi
-
- # Here we assume that one of hardcode_direct or hardcode_minus_L
- # is not unsupported. This is valid on all known static and
- # shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
- compile_command="$compile_command $dir/$linklib"
- finalize_command="$finalize_command $dir/$linklib"
- else
- compile_command="$compile_command -L$dir -l$name"
- finalize_command="$finalize_command -L$dir -l$name"
- fi
- fi
-
- # Add in any libraries that this one depends upon.
- compile_command="$compile_command$dependency_libs"
- finalize_command="$finalize_command$dependency_libs"
- continue
- ;;
-
- # Some other compiler argument.
- *)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case "$arg" in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- arg="\"$arg\""
- ;;
- esac
- ;;
- esac
-
- # Now actually substitute the argument into the commands.
- if test -n "$arg"; then
- compile_command="$compile_command $arg"
- finalize_command="$finalize_command $arg"
- fi
- done
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- if test -n "$vinfo" && test -n "$release"; then
- $echo "$modename: you cannot specify both \`-version-info' and \`-release'" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- oldlib=
- oldobjs=
- case "$output" in
- "")
- $echo "$modename: you must specify an output file" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
-
- */* | *\\*)
- $echo "$modename: output file \`$output' must have no directory components" 1>&2
- exit 1
- ;;
-
- *.a)
- # Now set the variables for building old libraries.
- build_libtool_libs=no
- build_old_libs=yes
- oldlib="$output"
- $show "$rm $oldlib"
- $run $rm $oldlib
- ;;
-
- *.la)
- # Make sure we only generate libraries of the form `libNAME.la'.
- case "$output" in
- lib*) ;;
- *)
- $echo "$modename: libtool library \`$arg' must begin with \`lib'" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
- esac
-
- name=`$echo "X$output" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
- eval libname=\"$libname_spec\"
-
- # All the library-specific variables (install_libdir is set above).
- library_names=
- old_library=
- dlname=
- current=0
- revision=0
- age=0
-
- if test -n "$objs"; then
- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
- exit 1
- fi
-
- # How the heck are we supposed to write a wrapper for a shared library?
- if test -n "$link_against_libtool_libs"; then
- $echo "$modename: libtool library \`$output' may not depend on uninstalled libraries:$link_against_libtool_libs" 1>&2
- exit 1
- fi
-
- if test -n "$dlfiles$dlprefiles"; then
- $echo "$modename: warning: \`-dlopen' is ignored while creating libtool libraries" 1>&2
- # Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
- fi
-
- if test -z "$rpath"; then
- $echo "$modename: you must specify an installation directory with \`-rpath'" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- set dummy $rpath
- if test $# -gt 2; then
- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
- fi
- install_libdir="$2"
-
- # Parse the version information argument.
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
- set dummy $vinfo
- IFS="$save_ifs"
-
- if test -n "$5"; then
- $echo "$modename: too many parameters to \`-version-info'" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- test -n "$2" && current="$2"
- test -n "$3" && revision="$3"
- test -n "$4" && age="$4"
-
- # Check that each of the things are valid numbers.
- case "$current" in
- 0 | [1-9] | [1-9][0-9]*) ;;
- *)
- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- ;;
- esac
-
- case "$revision" in
- 0 | [1-9] | [1-9][0-9]*) ;;
- *)
- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- ;;
- esac
-
- case "$age" in
- 0 | [1-9] | [1-9][0-9]*) ;;
- *)
- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- ;;
- esac
-
- if test $age -gt $current; then
- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
- fi
-
- # Calculate the version variables.
- version_vars="version_type current age revision"
- case "$version_type" in
- none) ;;
-
- linux)
- version_vars="$version_vars major versuffix"
- major=`expr $current - $age`
- versuffix="$major.$age.$revision"
- ;;
-
- osf)
- version_vars="$version_vars versuffix verstring"
- major=`expr $current - $age`
- versuffix="$current.$age.$revision"
- verstring="$versuffix"
-
- # Add in all the interfaces that we are compatible with.
- loop=$age
- while test $loop != 0; do
- iface=`expr $current - $loop`
- loop=`expr $loop - 1`
- verstring="$verstring:${iface}.0"
- done
-
- # Make executables depend on our current version.
- verstring="$verstring:${current}.0"
- ;;
-
- sunos)
- version_vars="$version_vars major versuffix"
- major="$current"
- versuffix="$current.$revision"
- ;;
-
- *)
- $echo "$modename: unknown library version type \`$version_type'" 1>&2
- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit 1
- ;;
- esac
-
- # Create the output directory, or remove our outputs if we need to.
- if test -d $objdir; then
- $show "$rm $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.*"
- $run $rm $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.*
- else
- $show "$mkdir $objdir"
- $run $mkdir $objdir
- status=$?
- if test $status -eq 0 || test -d $objdir; then :
- else
- exit $status
- fi
- fi
-
- # Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
- build_libtool_libs=no
- build_old_libs=yes
- fi
- else
- # Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
- fi
-
- # Add libc to deplibs on all systems.
- dependency_libs="$deplibs"
- deplibs="$deplibs -lc"
-
- if test "$build_libtool_libs" = yes; then
- # Get the real and link names of the library.
- eval library_names=\"$library_names_spec\"
- set dummy $library_names
- realname="$2"
- shift; shift
-
- if test -n "$soname_spec"; then
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
-
- lib="$objdir/$realname"
- for link
- do
- linknames="$linknames $link"
- done
-
- # Use standard objects if they are PIC.
- test -z "$pic_flag" && libobjs=`$echo "X$libobjs " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//g'`
-
- # Do each of the archive commands.
- eval cmds=\"$archive_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- # Create links to the real library.
- for linkname in $linknames; do
- $show "(cd $objdir && $LN_S $realname $linkname)"
- $run eval '(cd $objdir && $LN_S $realname $linkname)' || exit $?
- done
-
- # If -export-dynamic was specified, set the dlname.
- if test "$export_dynamic" = yes; then
- # On all known operating systems, these are identical.
- dlname="$soname"
- fi
- fi
-
- # Now set the variables for building old libraries.
- oldlib="$objdir/$libname.a"
- ;;
-
- *.lo | *.o)
- if test -n "$link_against_libtool_libs"; then
- $echo "$modename: error: cannot link libtool libraries into reloadable objects" 1>&2
- exit 1
- fi
-
- if test -n "$deplibs"; then
- $echo "$modename: warning: \`-l' and \`-L' are ignored while creating objects" 1>&2
- fi
-
- if test -n "$dlfiles$dlprefiles"; then
- $echo "$modename: warning: \`-dlopen' is ignored while creating objects" 1>&2
- # Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
- fi
-
- if test -n "$rpath"; then
- $echo "$modename: warning: \`-rpath' is ignored while creating objects" 1>&2
- fi
-
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored while creating objects" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored while creating objects" 1>&2
- fi
-
- case "$output" in
- *.lo)
- if test -n "$objs"; then
- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
- exit 1
- fi
- libobj="$output"
- obj=`$echo "X$output" | $Xsed -e 's/\.lo$/.o/'`
- ;;
- *)
- libobj=
- obj="$output"
- ;;
- esac
-
- # Delete the old objects.
- $run $rm $obj $libobj
-
- # Create the old-style object.
- reload_objs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.a //g' -e 's/\.lo /.o /g' -e 's/ $//g'`
-
- output="$obj"
- eval cmds=\"$reload_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
-
- # Exit if we aren't doing a library object file.
- test -z "$libobj" && exit 0
-
- if test "$build_libtool_libs" != yes; then
- # Create an invalid libtool object if no PIC, so that we don't
- # accidentally link it into a program.
- $show "echo timestamp > $libobj"
- $run eval "echo timestamp > $libobj" || exit $?
- exit 0
- fi
-
- if test -n "$pic_flag"; then
- # Only do commands if we really have different PIC objects.
- reload_objs="$libobjs"
- output="$libobj"
- eval cmds=\"$reload_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- else
- # Just create a symlink.
- $show "$LN_S $obj $libobj"
- $run $LN_S $obj $libobj || exit 1
- fi
-
- exit 0
- ;;
-
- *)
- if test -n "$vinfo"; then
- $echo "$modename: warning: \`-version-info' is ignored while linking programs" 1>&2
- fi
-
- if test -n "$release"; then
- $echo "$modename: warning: \`-release' is ignored while creating objects" 1>&2
- fi
-
- if test -n "$rpath"; then
- # If the user specified any rpath flags, then add them.
- for libdir in $rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- # Put the magic libdir with the hardcode flag.
- hardcode_libdirs="$libdir"
- libdir="@HARDCODE_LIBDIRS@"
- else
- # Just accumulate the unique libdirs.
- case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
- ;;
- esac
- libdir=
- fi
- fi
-
- if test -n "$libdir"; then
- eval flag=\"$hardcode_libdir_flag_spec\"
-
- compile_command="$compile_command $flag"
- finalize_command="$finalize_command $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) perm_rpath="$perm_rpath $libdir" ;;
- esac
- fi
- done
- fi
-
- # Substitute the hardcoded libdirs into the compile commands.
- if test -n "$hardcode_libdir_separator"; then
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"`
- fi
-
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
- # Transform all the library objects into standard objects.
- compile_command=`$echo "X$compile_command " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'`
- finalize_command=`$echo "X$finalize_command " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'`
- fi
-
- if test "$export_dynamic" = yes && test -n "$NM" && test -n "$global_symbol_pipe"; then
- dlsyms="${output}S.c"
- else
- dlsyms=
- fi
-
- if test -n "$dlsyms"; then
- # Add our own program objects to the preloaded list.
- dlprefiles=`$echo "X$objs$dlprefiles " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'`
-
- # Discover the nlist of each of the dlfiles.
- nlist="$objdir/${output}.nm"
-
- if test -d $objdir; then
- $show "$rm $nlist ${nlist}T"
- $run $rm "$nlist" "${nlist}T"
- else
- $show "$mkdir $objdir"
- $run $mkdir $objdir
- status=$?
- if test $status -eq 0 || test -d $objdir; then :
- else
- exit $status
- fi
- fi
-
- for arg in $dlprefiles; do
- $show "extracting global C symbols from \`$arg'"
- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
- done
-
- # Parse the name list into a source file.
- $show "creating $objdir/$dlsyms"
- if test -z "$run"; then
- # Make sure we at least have an empty file.
- test -f "$nlist" || : > "$nlist"
-
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- wcout=`wc "$nlist" 2>/dev/null`
- count=`echo "X$wcout" | $Xsed -e 's/^[ ]*\([0-9][0-9]*\).*$/\1/'`
- (test "$count" -ge 0) 2>/dev/null || count=-1
- else
- $rm "$nlist"T
- count=-1
- fi
-
- case "$dlsyms" in
- "") ;;
- *.c)
- $echo > "$objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$output' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define dld_preloaded_symbol_count some_other_symbol
-#define dld_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
- if test -f "$nlist"; then
- sed -e 's/^.* \(.*\)$/extern char \1;/' < "$nlist" >> "$objdir/$dlsyms"
- else
- echo '/* NONE */' >> "$objdir/$dlsyms"
- fi
-
- $echo >> "$objdir/$dlsyms" "\
-
-#undef dld_preloaded_symbol_count
-#undef dld_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define __ptr_t void *
-#else
-# define __ptr_t char *
-#endif
-
-/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */
-int dld_preloaded_symbol_count = $count;
-
-/* The mapping between symbol names and symbols. */
-struct {
- char *name;
- __ptr_t address;
-}
-dld_preloaded_symbols[] =
-{\
-"
-
- if test -f "$nlist"; then
- sed 's/^\(.*\) \(.*\)$/ {"\1", (__ptr_t) \&\2},/' < "$nlist" >> "$objdir/$dlsyms"
- fi
-
- $echo >> "$objdir/$dlsyms" "\
- {0, (__ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif\
-"
- ;;
-
- *)
- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
- exit 1
- ;;
- esac
- fi
-
- # Now compile the dynamic symbol file.
- $show "(cd $objdir && $CC -c$no_builtin_flag \"$dlsyms\")"
- $run eval '(cd $objdir && $CC -c$no_builtin_flag "$dlsyms")' || exit $?
-
- # Transform the symbol file into the correct name.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.o%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.o%"`
- elif test "$export_dynamic" != yes; then
- test -n "$dlfiles$dlprefiles" && $echo "$modename: warning: \`-dlopen' and \`-dlpreopen' are ignored without \`-export-dynamic'" 1>&2
- else
- # We keep going just in case the user didn't refer to
- # dld_preloaded_symbols. The linker will fail if global_symbol_pipe
- # really was required.
- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-
- # Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
- fi
-
- if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
- # Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-
- # We have no uninstalled library dependencies, so finalize right now.
- $show "$compile_command"
- $run eval "$compile_command"
- exit $?
- fi
-
- # Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'%g'`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'T%g'`
-
- # Create the binary in the object directory, then wrap it.
- if test -d $objdir; then :
- else
- $show "$mkdir $objdir"
- $run $mkdir $objdir
- status=$?
- if test $status -eq 0 || test -d $objdir; then :
- else
- exit $status
- fi
- fi
-
- if test -n "$shlibpath_var"; then
- # We should set the shlibpath_var
- rpath=
- for dir in $temp_rpath; do
- case "$dir" in
- /* | [A-Za-z]:\\*)
- # Absolute path.
- rpath="$rpath$dir:"
- ;;
- *)
- # Relative path: add a thisdir entry.
- rpath="$rpath\$thisdir/$dir:"
- ;;
- esac
- done
- temp_rpath="$rpath"
- fi
-
- # Delete the old output file.
- $run $rm $output
-
- if test -n "$compile_shlibpath"; then
- compile_command="$shlibpath_var=\"$compile_shlibpath\$$shlibpath_var\" $compile_command"
- fi
- if test -n "$finalize_shlibpath"; then
- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
- fi
-
- if test -n "$runpath_var" && test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- rpath="$rpath$dir:"
- done
- compile_command="$runpath_var=\"$rpath\$$runpath_var\" $compile_command"
- finalize_command="$runpath_var=\"$rpath\$$runpath_var\" $finalize_command"
- fi
-
- case "$hardcode_action" in
- relink)
- # AGH! Flame the AIX and HP-UX people for me, will ya?
- $echo "$modename: warning: using a buggy system linker" 1>&2
- $echo "$modename: relinking will be required before \`$output' can be installed" 1>&2
- ;;
- esac
-
- $show "$compile_command"
- $run eval "$compile_command" || exit $?
-
- # Now create the wrapper script.
- $show "creating $output"
-
- # Quote the finalize command for shipping.
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "$sed_quote_subst"`
-
- # Quote $echo for shipping.
- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
-
- # Only actually do things if our run command is non-null.
- if test -z "$run"; then
- $rm $output
- trap "$rm $output; exit 1" 1 2 15
-
- $echo > $output "\
-#! /bin/sh
-
-# $output - temporary wrapper script for $objdir/$output
-# Generated by ltmain.sh - GNU $PACKAGE $VERSION
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of \``pwd`'.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=; export CDPATH; fi
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
- # install mode needs the following variables:
- link_against_libtool_libs='$link_against_libtool_libs'
- finalize_command=\"$finalize_command\"
-else
- # When we are sourced in execute mode, \$file and \$echo are already set.
- if test \"\$libtool_execute_magic\" = \"$magic\"; then :
- else
- echo=\"$qecho\"
- file=\"\$0\"
- fi\
-"
- $echo >> $output "\
-
- # Find the directory that this script lives in.
- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
- # Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
- while test -n \"\$file\"; do
- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
- # If there was a directory component, then change thisdir.
- if test \"x\$destdir\" != \"x\$file\"; then
- case \"\$destdir\" in
- /* | [A-Za-z]:\\*) thisdir=\"\$destdir\" ;;
- *) thisdir=\"\$thisdir/\$destdir\" ;;
- esac
- fi
-
- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
- done
-
- # Try to get the absolute directory name.
- absdir=\`cd \"\$thisdir\" && pwd\`
- test -n \"\$absdir\" && thisdir=\"\$absdir\"
-
- progdir=\"\$thisdir/$objdir\"
- program='$output'
-
- if test -f \"\$progdir/\$program\"; then"
-
- # Export our shlibpath_var if we have one.
- if test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- $echo >> $output "\
- # Add our own library path to $shlibpath_var
- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
- # Some systems cannot cope with colon-terminated $shlibpath_var
- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/:*\$//'\`
-
- export $shlibpath_var
-"
- fi
-
- $echo >> $output "\
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- # Run the actual program with our arguments.
-
- # Export the path to the program.
- PATH=\"\$progdir:\$PATH\"
- export PATH
-
- exec \$program \${1+\"\$@\"}
-
- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
- exit 1
- fi
- else
- # The program doesn't exist.
- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
- \$echo \"This script is just a wrapper for \$program.\" 1>&2
- echo \"See the $PACKAGE documentation for more information.\" 1>&2
- exit 1
- fi
-fi\
-"
- chmod +x $output
- fi
- exit 0
- ;;
- esac
-
- # See if we need to build an old-fashioned archive.
- if test "$build_old_libs" = "yes"; then
- # Transform .lo files to .o files.
- oldobjs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^ ]*\.a //g' -e 's/\.lo /.o /g' -e 's/ $//g'`
-
- # Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
- eval cmds=\"$old_archive_from_new_cmds\"
- else
- eval cmds=\"$old_archive_cmds\"
- fi
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- # Now create the libtool archive.
- case "$output" in
- *.la)
- old_library=
- test "$build_old_libs" = yes && old_library="$libname.a"
-
- $show "creating $output"
-
- # Only create the output if not a dry run.
- if test -z "$run"; then
- $echo > $output "\
-# $output - a libtool library file
-# Generated by ltmain.sh - GNU $PACKAGE $VERSION
-
-# The name that we can dlopen(3).
-dlname='$dlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'\
-"
- fi
-
- # Do a symbolic link so that the libtool archive can be found in
- # LD_LIBRARY_PATH before the program is installed.
- $show "(cd $objdir && $LN_S ../$output $output)"
- $run eval "(cd $objdir && $LN_S ../$output $output)" || exit 1
- ;;
- esac
- exit 0
- ;;
-
- # libtool install mode
- install)
- modename="$modename: install"
-
- # There may be an optional /bin/sh argument at the beginning of
- # install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL"; then
- # Aesthetically quote it.
- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
- case "$arg" in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- arg="\"$arg\""
- ;;
- esac
- install_prog="$arg "
- arg="$1"
- shift
- else
- install_prog=
- arg="$nonopt"
- fi
-
- # The real first argument should be the name of the installation program.
- # Aesthetically quote it.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case "$arg" in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog$arg"
-
- # We need to accept at least all the BSD install flags.
- dest=
- files=
- opts=
- prev=
- install_type=
- isdir=
- stripme=
- for arg
- do
- if test -n "$dest"; then
- files="$files $dest"
- dest="$arg"
- continue
- fi
-
- case "$arg" in
- -d) isdir=yes ;;
- -f) prev="-f" ;;
- -g) prev="-g" ;;
- -m) prev="-m" ;;
- -o) prev="-o" ;;
- -s)
- stripme=" -s"
- continue
- ;;
- -*) ;;
-
- *)
- # If the previous option needed an argument, then skip it.
- if test -n "$prev"; then
- prev=
- else
- dest="$arg"
- continue
- fi
- ;;
- esac
-
- # Aesthetically quote the argument.
- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
- case "$arg" in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
- arg="\"$arg\""
- ;;
- esac
- install_prog="$install_prog $arg"
- done
-
- if test -z "$install_prog"; then
- $echo "$modename: you must specify an install program" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- if test -n "$prev"; then
- $echo "$modename: the \`$prev' option requires an argument" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- if test -z "$files"; then
- if test -z "$dest"; then
- $echo "$modename: no file or destination specified" 1>&2
- else
- $echo "$modename: you must specify a destination" 1>&2
- fi
- $echo "$help" 1>&2
- exit 1
- fi
-
- # Strip any trailing slash from the destination.
- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
- # Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test -n "$isdir"; then
- destdir="$dest"
- destname=
- else
- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
- test "X$destdir" = "X$dest" && destdir=.
- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
- # Not a directory, so check to see that there is only one file specified.
- set dummy $files
- if test $# -gt 2; then
- $echo "$modename: \`$dest' is not a directory" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
- fi
- case "$destdir" in
- /* | [A-Za-z]:\\*) ;;
- *)
- for file in $files; do
- case "$file" in
- *.lo) ;;
- *)
- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
- esac
- done
- ;;
- esac
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- staticlibs=
- future_libdirs=
- current_libdirs=
- for file in $files; do
-
- # Do each installation.
- case "$file" in
- *.a)
- # Do the static libraries later.
- staticlibs="$staticlibs $file"
- ;;
-
- *.la)
- # Check to see that this really is a libtool archive.
- if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- library_names=
- old_library=
- # If there is no directory component, then add one.
- case "$file" in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Add the libdir to current_libdirs if it is the destination.
- if test "X$destdir" = "X$libdir"; then
- case "$current_libdirs " in
- *" $libdir "*) ;;
- *) current_libdirs="$current_libdirs $libdir" ;;
- esac
- else
- # Note the libdir as a future libdir.
- case "$future_libdirs " in
- *" $libdir "*) ;;
- *) future_libdirs="$future_libdirs $libdir" ;;
- esac
- fi
-
- dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
- test "X$dir" = "X$file/" && dir=
- dir="$dir$objdir"
-
- # See the names of the shared library.
- set dummy $library_names
- if test -n "$2"; then
- realname="$2"
- shift
- shift
-
- # Install the shared library and build the symlinks.
- $show "$install_prog $dir/$realname $destdir/$realname"
- $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $?
- test "X$dlname" = "X$realname" && dlname=
-
- if test $# -gt 0; then
- # Delete the old symlinks.
- rmcmd="$rm"
- for linkname
- do
- rmcmd="$rmcmd $destdir/$linkname"
- done
- $show "$rmcmd"
- $run $rmcmd
-
- # ... and create new ones.
- for linkname
- do
- test "X$dlname" = "X$linkname" && dlname=
- $show "(cd $destdir && $LN_S $realname $linkname)"
- $run eval "(cd $destdir && $LN_S $realname $linkname)"
- done
- fi
-
- if test -n "$dlname"; then
- # Install the dynamically-loadable library.
- $show "$install_prog $dir/$dlname $destdir/$dlname"
- $run eval "$install_prog $dir/$dlname $destdir/$dlname" || exit $?
- fi
-
- # Do each command in the postinstall commands.
- lib="$destdir/$realname"
- eval cmds=\"$postinstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- fi
-
- # Install the pseudo-library for information purposes.
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- $show "$install_prog $file $destdir/$name"
- $run eval "$install_prog $file $destdir/$name" || exit $?
-
- # Maybe install the static library, too.
- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
- ;;
-
- *.lo)
- # Install (i.e. copy) a libtool object.
-
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
- destfile="$destdir/$destfile"
- fi
-
- # Deduce the name of the destination old-style object file.
- case "$destfile" in
- *.lo)
- staticdest=`$echo "X$destfile" | $Xsed -e 's/\.lo$/\.o/'`
- ;;
- *.o)
- staticdest="$destfile"
- destfile=
- ;;
- *)
- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
- esac
-
- # Install the libtool object if requested.
- if test -n "$destfile"; then
- $show "$install_prog $file $destfile"
- $run eval "$install_prog $file $destfile" || exit $?
- fi
-
- # Install the old object if enabled.
- if test "$build_old_libs" = yes; then
- # Deduce the name of the old-style object file.
- staticobj=`$echo "X$file" | $Xsed -e 's/\.lo$/\.o/'`
-
- $show "$install_prog $staticobj $staticdest"
- $run eval "$install_prog \$staticobj \$staticdest" || exit $?
- fi
- exit 0
- ;;
-
- *)
- # Do a test to see if this is really a libtool program.
- if (sed -e '4q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then
- link_against_libtool_libs=
- finalize_command=
-
- # If there is no directory component, then add one.
- case "$file" in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Check the variables that should have been set.
- if test -z "$link_against_libtool_libs" || test -z "$finalize_command"; then
- $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
- exit 1
- fi
-
- finalize=yes
- for lib in $link_against_libtool_libs; do
- # Check to see that each library is installed.
- libdir=
- if test -f "$lib"; then
- # If there is no directory component, then add one.
- case "$lib" in
- */* | *\\*) . $lib ;;
- *) . ./$lib ;;
- esac
- fi
- libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
- if test -z "$libdir"; then
- $echo "$modename: warning: \`$lib' contains no -rpath information" 1>&2
- elif test -f "$libfile"; then :
- else
- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
- finalize=no
- fi
- done
-
- if test "$hardcode_action" = relink; then
- if test "$finalize" = yes; then
- $echo "$modename: warning: relinking \`$file' on behalf of your buggy system linker" 1>&2
- $show "$finalize_command"
- if $run eval "$finalize_command"; then :
- else
- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- continue
- fi
- file="$objdir/$file"T
- else
- $echo "$modename: warning: cannot relink \`$file' on behalf of your buggy system linker" 1>&2
- fi
- else
- # Install the binary that we compiled earlier.
- file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
- fi
- fi
-
- $show "$install_prog$stripme $file $dest"
- $run eval "$install_prog\$stripme \$file \$dest" || exit $?
- ;;
- esac
- done
-
- for file in $staticlibs; do
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
- # Set up the ranlib parameters.
- oldlib="$destdir/$name"
-
- $show "$install_prog $file $oldlib"
- $run eval "$install_prog \$file \$oldlib" || exit $?
-
- # Do each command in the postinstall commands.
- eval cmds=\"$old_postinstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd" || exit $?
- done
- IFS="$save_ifs"
- done
-
- if test -n "$future_libdirs"; then
- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
- fi
-
- if test -n "$current_libdirs"; then
- # Maybe just do a dry run.
- test -n "$run" && current_libdirs=" -n$current_libdirs"
- exec $SHELL $0 --finish$current_libdirs
- exit 1
- fi
-
- exit 0
- ;;
-
- # libtool finish mode
- finish)
- modename="$modename: finish"
- libdirs="$nonopt"
-
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- for dir
- do
- libdirs="$libdirs $dir"
- done
-
- for libdir in $libdirs; do
- if test -n "$finish_cmds"; then
- # Do each command in the finish commands.
- eval cmds=\"$finish_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd"
- done
- IFS="$save_ifs"
- fi
- if test -n "$finish_eval"; then
- # Do the single finish_eval.
- eval cmds=\"$finish_eval\"
- $run eval "$cmds"
- fi
- done
- fi
-
- echo "------------------------------------------------------------------------------"
- echo "Libraries have been installed in:"
- for libdir in $libdirs; do
- echo " $libdir"
- done
- echo
- echo "To link against installed libraries in a given directory, LIBDIR,"
- echo "you must use the \`-LLIBDIR' flag during linking."
- echo
- echo " You will also need to do one of the following:"
- if test -n "$shlibpath_var"; then
- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
- echo " during execution"
- fi
- if test -n "$runpath_var"; then
- echo " - add LIBDIR to the \`$runpath_var' environment variable"
- echo " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
-
- echo " - use the \`$flag' linker flag"
- fi
- if test -f /etc/ld.so.conf; then
- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
- fi
- echo
- echo "See any operating system documentation about shared libraries for"
- echo "more information, such as the ld(1) and ld.so(8) manual pages."
- echo "------------------------------------------------------------------------------"
- exit 0
- ;;
-
- # libtool execute mode
- execute)
- modename="$modename: execute"
-
- # The first argument is the command name.
- cmd="$nonopt"
- if test -z "$cmd"; then
- $echo "$modename: you must specify a COMMAND" 1>&2
- $echo "$help"
- exit 1
- fi
-
- # Handle -dlopen flags immediately.
- for file in $execute_dlfiles; do
- if test -f "$file"; then :
- else
- $echo "$modename: \`$file' is not a file" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- dir=
- case "$file" in
- *.la)
- # Check to see that this really is a libtool archive.
- if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then :
- else
- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- # Read the libtool library.
- dlname=
- library_names=
-
- # If there is no directory component, then add one.
- case "$file" in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Skip this library if it cannot be dlopened.
- if test -z "$dlname"; then
- # Warn if it was a shared library.
- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
- continue
- fi
-
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
-
- if test -f "$dir/$objdir/$dlname"; then
- dir="$dir/$objdir"
- else
- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
- exit 1
- fi
- ;;
-
- *.lo)
- # Just add the directory containing the .lo file.
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
- ;;
-
- *)
- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
- continue
- ;;
- esac
-
- # Get the absolute pathname.
- absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
-
- # Now add the directory to shlibpath_var.
- if eval "test -z \"\$$shlibpath_var\""; then
- eval "$shlibpath_var=\"\$dir\""
- else
- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
- fi
- done
-
- # This variable tells wrapper scripts just to set shlibpath_var
- # rather than running their programs.
- libtool_execute_magic="$magic"
-
- # Check if any of the arguments is a wrapper script.
- args=
- for file
- do
- case "$file" in
- -*) ;;
- *)
- # Do a test to see if this is really a libtool program.
- if (sed -e '4q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then
- # If there is no directory component, then add one.
- case "$file" in
- */* | *\\*) . $file ;;
- *) . ./$file ;;
- esac
-
- # Transform arg to wrapped name.
- file="$progdir/$program"
- fi
- ;;
- esac
- # Quote arguments (to preserve shell metacharacters).
- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
- args="$args \"$file\""
- done
-
- if test -z "$run"; then
- # Export the shlibpath_var.
- eval "export $shlibpath_var"
-
- # Now actually exec the command.
- eval "exec \$cmd$args"
-
- $echo "$modename: cannot exec \$cmd$args"
- exit 1
- else
- # Display what would be done.
- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
- $echo "export $shlibpath_var"
- $echo "$cmd$args"
- exit 0
- fi
- ;;
-
- # libtool uninstall mode
- uninstall)
- modename="$modename: uninstall"
- rm="$nonopt"
- files=
-
- for arg
- do
- case "$arg" in
- -*) rm="$rm $arg" ;;
- *) files="$files $arg" ;;
- esac
- done
-
- if test -z "$rm"; then
- $echo "$modename: you must specify an RM program" 1>&2
- $echo "$help" 1>&2
- exit 1
- fi
-
- for file in $files; do
- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
- test "X$dir" = "X$file" && dir=.
- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
- rmfiles="$file"
-
- case "$name" in
- *.la)
- # Possibly a libtool archive, so verify it.
- if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then
- . $dir/$name
-
- # Delete the libtool libraries and symlinks.
- for n in $library_names; do
- rmfiles="$rmfiles $dir/$n"
- test "X$n" = "X$dlname" && dlname=
- done
- test -n "$dlname" && rmfiles="$rmfiles $dir/$dlname"
- test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
-
- $show "$rm $rmfiles"
- $run $rm $rmfiles
-
- if test -n "$library_names"; then
- # Do each command in the postuninstall commands.
- eval cmds=\"$postuninstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd"
- done
- IFS="$save_ifs"
- fi
-
- if test -n "$old_library"; then
- # Do each command in the old_postuninstall commands.
- eval cmds=\"$old_postuninstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=';'
- for cmd in $cmds; do
- IFS="$save_ifs"
- $show "$cmd"
- $run eval "$cmd"
- done
- IFS="$save_ifs"
- fi
-
- # FIXME: should reinstall the best remaining shared library.
- fi
- ;;
-
- *.lo)
- if test "$build_old_libs" = yes; then
- oldobj=`$echo "X$name" | $Xsed -e 's/\.lo$/\.o/'`
- rmfiles="$rmfiles $dir/$oldobj"
- fi
- $show "$rm $rmfiles"
- $run $rm $rmfiles
- ;;
-
- *)
- $show "$rm $rmfiles"
- $run $rm $rmfiles
- ;;
- esac
- done
- exit 0
- ;;
-
- "")
- $echo "$modename: you must specify a MODE" 1>&2
- $echo "$generic_help" 1>&2
- exit 1
- ;;
- esac
-
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$generic_help" 1>&2
- exit 1
-fi # test -z "$show_help"
-
-# We need to display help for each of the modes.
-case "$mode" in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
--n, --dry-run display commands without modifying any files
- --features display configuration information and exit
- --finish same as \`--mode=finish'
- --help display this help message and exit
- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
- --quiet same as \`--silent'
- --silent don't print informational messages
- --version print version information
-
-MODE must be one of the following:
-
- compile compile a source file into a libtool object
- execute automatically set library path, then run a program
- finish complete the installation of libtool libraries
- install install libraries or executables
- link create a library or an executable
- uninstall remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE."
- exit 0
- ;;
-
-compile)
- $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
- ;;
-
-execute)
- $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
- -dlopen FILE add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
- ;;
-
-finish)
- $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
- ;;
-
-install)
- $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
- ;;
-
-link)
- $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
- -all-static do not do any dynamic linking at all
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
- -dlpreopen FILE link in FILE and add its symbols to dld_preloaded_symbols
- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
- -LLIBDIR search LIBDIR for required installed libraries
- -lNAME OUTPUT-FILE requires the installed library libNAME
- -no-undefined declare that a library does not refer to external symbols
- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -release RELEASE specify package release information
- -rpath LIBDIR the created library will eventually be installed in LIBDIR
- -static do not do any dynamic linking of libtool libraries
- -version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename. Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only
-library objects (\`.lo' files) may be specified, and \`-rpath' is required.
-
-If OUTPUT-FILE ends in \`.a', then a standard library is created using \`ar'
-and \`ranlib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.o', then a reloadable object file is
-created, otherwise an executable program is created."
- ;;
-
-uninstall)
- $echo
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
- ;;
-
-*)
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$help" 1>&2
- exit 1
- ;;
-esac
-
-echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit 0
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
diff --git a/libjpegtwrp/makcjpeg.st b/libjpegtwrp/makcjpeg.st
deleted file mode 100644
index fc72c8982..000000000
--- a/libjpegtwrp/makcjpeg.st
+++ /dev/null
@@ -1,38 +0,0 @@
-; Project file for Independent JPEG Group's software
-;
-; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
-; Thanks to Frank Moehle (Frank.Moehle@arbi.informatik.uni-oldenburg.de),
-; Dr. B. Setzepfandt (bernd@gina.uni-muenster.de),
-; and Guido Vollbeding (guivol@esc.de).
-;
-; To use this file, rename it to cjpeg.prj.
-; If you are using Turbo C, change filenames beginning with "pc..." to "tc..."
-; Read installation instructions before trying to make the program!
-;
-;
-; * * * Output file * * *
-cjpeg.ttp
-;
-; * * * COMPILER OPTIONS * * *
-.C[-P] ; absolute calls
-.C[-M] ; and no string merging, folks
-.C[-w-cln] ; no "constant is long" warnings
-.C[-w-par] ; no "parameter xxxx unused"
-.C[-w-rch] ; no "unreachable code"
-.C[-wsig] ; warn if significant digits may be lost
-=
-; * * * * List of modules * * * *
-pcstart.o
-cjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h)
-cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdswitch.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdppm.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdgif.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdtarga.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdbmp.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdrle.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-libjpeg.lib ; built by libjpeg.prj
-pcfltlib.lib ; floating point library
-; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED
-pcstdlib.lib ; standard library
-pcextlib.lib ; extended library
diff --git a/libjpegtwrp/makdjpeg.st b/libjpegtwrp/makdjpeg.st
deleted file mode 100644
index 322672631..000000000
--- a/libjpegtwrp/makdjpeg.st
+++ /dev/null
@@ -1,38 +0,0 @@
-; Project file for Independent JPEG Group's software
-;
-; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
-; Thanks to Frank Moehle (Frank.Moehle@arbi.informatik.uni-oldenburg.de),
-; Dr. B. Setzepfandt (bernd@gina.uni-muenster.de),
-; and Guido Vollbeding (guivol@esc.de).
-;
-; To use this file, rename it to djpeg.prj.
-; If you are using Turbo C, change filenames beginning with "pc..." to "tc..."
-; Read installation instructions before trying to make the program!
-;
-;
-; * * * Output file * * *
-djpeg.ttp
-;
-; * * * COMPILER OPTIONS * * *
-.C[-P] ; absolute calls
-.C[-M] ; and no string merging, folks
-.C[-w-cln] ; no "constant is long" warnings
-.C[-w-par] ; no "parameter xxxx unused"
-.C[-w-rch] ; no "unreachable code"
-.C[-wsig] ; warn if significant digits may be lost
-=
-; * * * * List of modules * * * *
-pcstart.o
-djpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h)
-cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdcolmap.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-wrppm.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-wrgif.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-wrtarga.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-wrbmp.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-wrrle.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-libjpeg.lib ; built by libjpeg.prj
-pcfltlib.lib ; floating point library
-; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED
-pcstdlib.lib ; standard library
-pcextlib.lib ; extended library
diff --git a/libjpegtwrp/makeapps.ds b/libjpegtwrp/makeapps.ds
deleted file mode 100644
index bedd038a3..000000000
--- a/libjpegtwrp/makeapps.ds
+++ /dev/null
@@ -1,828 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Format Version 4.20
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Console Application" 0x0103
-
-!IF "$(CFG)" == ""
-CFG=cjpeg - Win32
-!MESSAGE No configuration specified. Defaulting to cjpeg - Win32.
-!ENDIF
-
-!IF "$(CFG)" != "cjpeg - Win32" && "$(CFG)" != "djpeg - Win32" &&\
- "$(CFG)" != "jpegtran - Win32" && "$(CFG)" != "rdjpgcom - Win32" &&\
- "$(CFG)" != "wrjpgcom - Win32"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE on this makefile
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE
-!MESSAGE NMAKE /f "apps.mak" CFG="cjpeg - Win32"
-!MESSAGE
-!MESSAGE Possible choices for configuration are:
-!MESSAGE
-!MESSAGE "cjpeg - Win32" (based on "Win32 (x86) Console Application")
-!MESSAGE "djpeg - Win32" (based on "Win32 (x86) Console Application")
-!MESSAGE "jpegtran - Win32" (based on "Win32 (x86) Console Application")
-!MESSAGE "rdjpgcom - Win32" (based on "Win32 (x86) Console Application")
-!MESSAGE "wrjpgcom - Win32" (based on "Win32 (x86) Console Application")
-!MESSAGE
-!ERROR An invalid configuration is specified.
-!ENDIF
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE
-NULL=nul
-!ENDIF
-################################################################################
-# Begin Project
-# PROP Target_Last_Scanned "cjpeg - Win32"
-CPP=cl.exe
-RSC=rc.exe
-
-!IF "$(CFG)" == "cjpeg - Win32"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "cjpeg\Release"
-# PROP BASE Intermediate_Dir "cjpeg\Release"
-# PROP BASE Target_Dir "cjpeg"
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "cjpeg\Release"
-# PROP Intermediate_Dir "cjpeg\Release"
-# PROP Target_Dir "cjpeg"
-OUTDIR=.\cjpeg\Release
-INTDIR=.\cjpeg\Release
-
-ALL : "$(OUTDIR)\cjpeg.exe"
-
-CLEAN :
- -@erase "$(INTDIR)\cjpeg.obj"
- -@erase "$(INTDIR)\rdppm.obj"
- -@erase "$(INTDIR)\rdgif.obj"
- -@erase "$(INTDIR)\rdtarga.obj"
- -@erase "$(INTDIR)\rdrle.obj"
- -@erase "$(INTDIR)\rdbmp.obj"
- -@erase "$(INTDIR)\rdswitch.obj"
- -@erase "$(INTDIR)\cdjpeg.obj"
- -@erase "$(OUTDIR)\cjpeg.exe"
-
-"$(OUTDIR)" :
- if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE"\
- /Fp"$(INTDIR)/cjpeg.pch" /YX /Fo"$(INTDIR)/" /c
-CPP_OBJS=.\cjpeg\Release/
-CPP_SBRS=.\.
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-BSC32_FLAGS=/nologo /o"$(OUTDIR)/cjpeg.bsc"
-BSC32_SBRS= \
-
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib\
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib\
- odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no\
- /pdb:"$(OUTDIR)/cjpeg.pdb" /machine:I386 /out:"$(OUTDIR)/cjpeg.exe"
-LINK32_OBJS= \
- "$(INTDIR)\cjpeg.obj" \
- "$(INTDIR)\rdppm.obj" \
- "$(INTDIR)\rdgif.obj" \
- "$(INTDIR)\rdtarga.obj" \
- "$(INTDIR)\rdrle.obj" \
- "$(INTDIR)\rdbmp.obj" \
- "$(INTDIR)\rdswitch.obj" \
- "$(INTDIR)\cdjpeg.obj" \
-
-
-"$(OUTDIR)\cjpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
- $(LINK32) @<<
- $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-!ELSEIF "$(CFG)" == "djpeg - Win32"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "djpeg\Release"
-# PROP BASE Intermediate_Dir "djpeg\Release"
-# PROP BASE Target_Dir "djpeg"
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "djpeg\Release"
-# PROP Intermediate_Dir "djpeg\Release"
-# PROP Target_Dir "djpeg"
-OUTDIR=.\djpeg\Release
-INTDIR=.\djpeg\Release
-
-ALL : "$(OUTDIR)\djpeg.exe"
-
-CLEAN :
- -@erase "$(INTDIR)\djpeg.obj"
- -@erase "$(INTDIR)\wrppm.obj"
- -@erase "$(INTDIR)\wrgif.obj"
- -@erase "$(INTDIR)\wrtarga.obj"
- -@erase "$(INTDIR)\wrrle.obj"
- -@erase "$(INTDIR)\wrbmp.obj"
- -@erase "$(INTDIR)\rdcolmap.obj"
- -@erase "$(INTDIR)\cdjpeg.obj"
- -@erase "$(OUTDIR)\djpeg.exe"
-
-"$(OUTDIR)" :
- if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE"\
- /Fp"$(INTDIR)/djpeg.pch" /YX /Fo"$(INTDIR)/" /c
-CPP_OBJS=.\djpeg\Release/
-CPP_SBRS=.\.
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-BSC32_FLAGS=/nologo /o"$(OUTDIR)/djpeg.bsc"
-BSC32_SBRS= \
-
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib\
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib\
- odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no\
- /pdb:"$(OUTDIR)/djpeg.pdb" /machine:I386 /out:"$(OUTDIR)/djpeg.exe"
-LINK32_OBJS= \
- "$(INTDIR)\djpeg.obj" \
- "$(INTDIR)\wrppm.obj" \
- "$(INTDIR)\wrgif.obj" \
- "$(INTDIR)\wrtarga.obj" \
- "$(INTDIR)\wrrle.obj" \
- "$(INTDIR)\wrbmp.obj" \
- "$(INTDIR)\rdcolmap.obj" \
- "$(INTDIR)\cdjpeg.obj" \
-
-
-"$(OUTDIR)\djpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
- $(LINK32) @<<
- $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-!ELSEIF "$(CFG)" == "jpegtran - Win32"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "jpegtran\Release"
-# PROP BASE Intermediate_Dir "jpegtran\Release"
-# PROP BASE Target_Dir "jpegtran"
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "jpegtran\Release"
-# PROP Intermediate_Dir "jpegtran\Release"
-# PROP Target_Dir "jpegtran"
-OUTDIR=.\jpegtran\Release
-INTDIR=.\jpegtran\Release
-
-ALL : "$(OUTDIR)\jpegtran.exe"
-
-CLEAN :
- -@erase "$(INTDIR)\jpegtran.obj"
- -@erase "$(INTDIR)\rdswitch.obj"
- -@erase "$(INTDIR)\cdjpeg.obj"
- -@erase "$(INTDIR)\transupp.obj"
- -@erase "$(OUTDIR)\jpegtran.exe"
-
-"$(OUTDIR)" :
- if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE"\
- /Fp"$(INTDIR)/jpegtran.pch" /YX /Fo"$(INTDIR)/" /c
-CPP_OBJS=.\jpegtran\Release/
-CPP_SBRS=.\.
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-BSC32_FLAGS=/nologo /o"$(OUTDIR)/jpegtran.bsc"
-BSC32_SBRS= \
-
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib\
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib\
- odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no\
- /pdb:"$(OUTDIR)/jpegtran.pdb" /machine:I386 /out:"$(OUTDIR)/jpegtran.exe"
-LINK32_OBJS= \
- "$(INTDIR)\jpegtran.obj" \
- "$(INTDIR)\rdswitch.obj" \
- "$(INTDIR)\cdjpeg.obj" \
- "$(INTDIR)\transupp.obj" \
-
-
-"$(OUTDIR)\jpegtran.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
- $(LINK32) @<<
- $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-!ELSEIF "$(CFG)" == "rdjpgcom - Win32"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "rdjpgcom\Release"
-# PROP BASE Intermediate_Dir "rdjpgcom\Release"
-# PROP BASE Target_Dir "rdjpgcom"
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "rdjpgcom\Release"
-# PROP Intermediate_Dir "rdjpgcom\Release"
-# PROP Target_Dir "rdjpgcom"
-OUTDIR=.\rdjpgcom\Release
-INTDIR=.\rdjpgcom\Release
-
-ALL : "$(OUTDIR)\rdjpgcom.exe"
-
-CLEAN :
- -@erase "$(INTDIR)\rdjpgcom.obj"
- -@erase "$(OUTDIR)\rdjpgcom.exe"
-
-"$(OUTDIR)" :
- if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE"\
- /Fp"$(INTDIR)/rdjpgcom.pch" /YX /Fo"$(INTDIR)/" /c
-CPP_OBJS=.\rdjpgcom\Release/
-CPP_SBRS=.\.
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-BSC32_FLAGS=/nologo /o"$(OUTDIR)/rdjpgcom.bsc"
-BSC32_SBRS= \
-
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib\
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib\
- odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no\
- /pdb:"$(OUTDIR)/rdjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)/rdjpgcom.exe"
-LINK32_OBJS= \
- "$(INTDIR)\rdjpgcom.obj"
-
-"$(OUTDIR)\rdjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
- $(LINK32) @<<
- $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-!ELSEIF "$(CFG)" == "wrjpgcom - Win32"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "wrjpgcom\Release"
-# PROP BASE Intermediate_Dir "wrjpgcom\Release"
-# PROP BASE Target_Dir "wrjpgcom"
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "wrjpgcom\Release"
-# PROP Intermediate_Dir "wrjpgcom\Release"
-# PROP Target_Dir "wrjpgcom"
-OUTDIR=.\wrjpgcom\Release
-INTDIR=.\wrjpgcom\Release
-
-ALL : "$(OUTDIR)\wrjpgcom.exe"
-
-CLEAN :
- -@erase "$(INTDIR)\wrjpgcom.obj"
- -@erase "$(OUTDIR)\wrjpgcom.exe"
-
-"$(OUTDIR)" :
- if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE"\
- /Fp"$(INTDIR)/wrjpgcom.pch" /YX /Fo"$(INTDIR)/" /c
-CPP_OBJS=.\wrjpgcom\Release/
-CPP_SBRS=.\.
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-BSC32_FLAGS=/nologo /o"$(OUTDIR)/wrjpgcom.bsc"
-BSC32_SBRS= \
-
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib\
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib\
- odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no\
- /pdb:"$(OUTDIR)/wrjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)/wrjpgcom.exe"
-LINK32_OBJS= \
- "$(INTDIR)\wrjpgcom.obj"
-
-"$(OUTDIR)\wrjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
- $(LINK32) @<<
- $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-!ENDIF
-
-.c{$(CPP_OBJS)}.obj:
- $(CPP) $(CPP_PROJ) $<
-
-.cpp{$(CPP_OBJS)}.obj:
- $(CPP) $(CPP_PROJ) $<
-
-.cxx{$(CPP_OBJS)}.obj:
- $(CPP) $(CPP_PROJ) $<
-
-.c{$(CPP_SBRS)}.sbr:
- $(CPP) $(CPP_PROJ) $<
-
-.cpp{$(CPP_SBRS)}.sbr:
- $(CPP) $(CPP_PROJ) $<
-
-.cxx{$(CPP_SBRS)}.sbr:
- $(CPP) $(CPP_PROJ) $<
-
-################################################################################
-# Begin Target
-
-# Name "cjpeg - Win32"
-
-!IF "$(CFG)" == "cjpeg - Win32"
-
-!ENDIF
-
-################################################################################
-# Begin Source File
-
-SOURCE="cjpeg.c"
-DEP_CPP_CJPEG=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
- "jversion.h"\
-
-
-"$(INTDIR)\cjpeg.obj" : $(SOURCE) $(DEP_CPP_CJPEG) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="cdjpeg.c"
-DEP_CPP_CDJPE=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\cdjpeg.obj" : $(SOURCE) $(DEP_CPP_CDJPE) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdswitch.c"
-DEP_CPP_RDSWI=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\rdswitch.obj" : $(SOURCE) $(DEP_CPP_RDSWI) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdppm.c"
-DEP_CPP_RDPPM=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\rdppm.obj" : $(SOURCE) $(DEP_CPP_RDPPM) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdgif.c"
-DEP_CPP_RDGIF=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\rdgif.obj" : $(SOURCE) $(DEP_CPP_RDGIF) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdtarga.c"
-DEP_CPP_RDTAR=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\rdtarga.obj" : $(SOURCE) $(DEP_CPP_RDTAR) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdbmp.c"
-DEP_CPP_RDBMP=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\rdbmp.obj" : $(SOURCE) $(DEP_CPP_RDBMP) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdrle.c"
-DEP_CPP_RDRLE=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\rdrle.obj" : $(SOURCE) $(DEP_CPP_RDRLE) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-# End Target
-################################################################################
-# Begin Target
-
-# Name "djpeg - Win32"
-
-!IF "$(CFG)" == "djpeg - Win32"
-
-!ENDIF
-
-################################################################################
-# Begin Source File
-
-SOURCE="djpeg.c"
-DEP_CPP_DJPEG=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
- "jversion.h"\
-
-
-"$(INTDIR)\djpeg.obj" : $(SOURCE) $(DEP_CPP_DJPEG) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="cdjpeg.c"
-DEP_CPP_CDJPE=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\cdjpeg.obj" : $(SOURCE) $(DEP_CPP_CDJPE) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdcolmap.c"
-DEP_CPP_RDCOL=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\rdcolmap.obj" : $(SOURCE) $(DEP_CPP_RDCOL) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="wrppm.c"
-DEP_CPP_WRPPM=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\wrppm.obj" : $(SOURCE) $(DEP_CPP_WRPPM) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="wrgif.c"
-DEP_CPP_WRGIF=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\wrgif.obj" : $(SOURCE) $(DEP_CPP_WRGIF) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="wrtarga.c"
-DEP_CPP_WRTAR=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\wrtarga.obj" : $(SOURCE) $(DEP_CPP_WRTAR) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="wrbmp.c"
-DEP_CPP_WRBMP=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\wrbmp.obj" : $(SOURCE) $(DEP_CPP_WRBMP) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="wrrle.c"
-DEP_CPP_WRRLE=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\wrrle.obj" : $(SOURCE) $(DEP_CPP_WRRLE) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-# End Target
-################################################################################
-# Begin Target
-
-# Name "jpegtran - Win32"
-
-!IF "$(CFG)" == "jpegtran - Win32"
-
-!ENDIF
-
-################################################################################
-# Begin Source File
-
-SOURCE="jpegtran.c"
-DEP_CPP_JPEGT=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
- "transupp.h"\
- "jversion.h"\
-
-
-"$(INTDIR)\jpegtran.obj" : $(SOURCE) $(DEP_CPP_JPEGT) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="cdjpeg.c"
-DEP_CPP_CDJPE=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\cdjpeg.obj" : $(SOURCE) $(DEP_CPP_CDJPE) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdswitch.c"
-DEP_CPP_RDSWI=\
- "cdjpeg.h"\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
- "cderror.h"\
-
-
-"$(INTDIR)\rdswitch.obj" : $(SOURCE) $(DEP_CPP_RDSWI) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="transupp.c"
-DEP_CPP_TRANS=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "transupp.h"\
-
-
-"$(INTDIR)\transupp.obj" : $(SOURCE) $(DEP_CPP_TRANS) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-# End Target
-################################################################################
-# Begin Target
-
-# Name "rdjpgcom - Win32"
-
-!IF "$(CFG)" == "rdjpgcom - Win32"
-
-!ENDIF
-
-################################################################################
-# Begin Source File
-
-SOURCE="rdjpgcom.c"
-DEP_CPP_RDJPG=\
- "jinclude.h"\
- "jconfig.h"\
-
-
-"$(INTDIR)\rdjpgcom.obj" : $(SOURCE) $(DEP_CPP_RDJPG) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-# End Target
-################################################################################
-# Begin Target
-
-# Name "wrjpgcom - Win32"
-
-!IF "$(CFG)" == "wrjpgcom - Win32"
-
-!ENDIF
-
-################################################################################
-# Begin Source File
-
-SOURCE="wrjpgcom.c"
-DEP_CPP_WRJPG=\
- "jinclude.h"\
- "jconfig.h"\
-
-
-"$(INTDIR)\wrjpgcom.obj" : $(SOURCE) $(DEP_CPP_WRJPG) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-# End Target
-# End Project
-################################################################################
-
diff --git a/libjpegtwrp/makefile.ansi b/libjpegtwrp/makefile.ansi
deleted file mode 100644
index 829191359..000000000
--- a/libjpegtwrp/makefile.ansi
+++ /dev/null
@@ -1,214 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is suitable for Unix-like systems with ANSI-capable compilers.
-# If you have a non-ANSI compiler, makefile.unix is a better starting point.
-
-# Read installation instructions before saying "make" !!
-
-# The name of your C compiler:
-CC= cc
-
-# You may need to adjust these cc options:
-CFLAGS= -O
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Link-time cc options:
-LDFLAGS=
-
-# To link any special libraries, add the necessary -l commands here.
-LDLIBS=
-
-# Put here the object file name for the correct system-dependent memory
-# manager file. For Unix this is usually jmemnobs.o, but you may want
-# to use jmemansi.o or jmemname.o if you have limited swap space.
-SYSDEPMEM= jmemnobs.o
-
-# miscellaneous OS-dependent stuff
-# linker
-LN= $(CC)
-# file deletion command
-RM= rm -f
-# library (.a) file creation command
-AR= ar rc
-# second step in .a creation (use "touch" if not needed)
-AR2= ranlib
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
- jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
- jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
- jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
- jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
- jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
- jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
- jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
- rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
- rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
- jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
- wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
- coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
- makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
- makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
- maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
- makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
- jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
- jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
- testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
- $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
- jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
- jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
- jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
- jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
- jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
- jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.a
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
- cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
- cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o
-
-
-all: libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-
-libjpeg.a: $(LIBOBJECTS)
- $(RM) libjpeg.a
- $(AR) libjpeg.a $(LIBOBJECTS)
- $(AR2) libjpeg.a
-
-cjpeg: $(COBJECTS) libjpeg.a
- $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS)
-
-djpeg: $(DOBJECTS) libjpeg.a
- $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS)
-
-jpegtran: $(TROBJECTS) libjpeg.a
- $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS)
-
-rdjpgcom: rdjpgcom.o
- $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS)
-
-wrjpgcom: wrjpgcom.o
- $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS)
-
-jconfig.h: jconfig.doc
- echo You must prepare a system-dependent jconfig.h file.
- echo Please read the installation directions in install.doc.
- exit 1
-
-clean:
- $(RM) *.o cjpeg djpeg jpegtran libjpeg.a rdjpgcom wrjpgcom
- $(RM) core testout*
-
-test: cjpeg djpeg jpegtran
- $(RM) testout*
- ./djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
- ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg
- ./cjpeg -dct int -outfile testout.jpg testimg.ppm
- ./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
- ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
- ./jpegtran -outfile testoutt.jpg testprog.jpg
- cmp testimg.ppm testout.ppm
- cmp testimg.bmp testout.bmp
- cmp testimg.jpg testout.jpg
- cmp testimg.ppm testoutp.ppm
- cmp testimgp.jpg testoutp.jpg
- cmp testorig.jpg testoutt.jpg
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/libjpegtwrp/makefile.bcc b/libjpegtwrp/makefile.bcc
deleted file mode 100644
index a1cfcde66..000000000
--- a/libjpegtwrp/makefile.bcc
+++ /dev/null
@@ -1,285 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is suitable for Borland C on MS-DOS or OS/2.
-# It works with Borland C++ for DOS, revision 3.0 or later,
-# and has been tested with Borland C++ for OS/2.
-# Watch out for optimization bugs in the OS/2 compilers --- see notes below!
-# Thanks to Tom Wright and Ge' Weijers (original DOS) and
-# Ken Porter (OS/2) for this file.
-
-# Read installation instructions before saying "make" !!
-
-# Are we under DOS or OS/2?
-!if !$d(DOS) && !$d(OS2)
-!if $d(__OS2__)
-OS2=1
-!else
-DOS=1
-!endif
-!endif
-
-# The name of your C compiler:
-CC= bcc
-
-# You may need to adjust these cc options:
-!if $d(DOS)
-CFLAGS= -O2 -mm -w-par -w-stu -w-ccc -w-rch
-!else
-CFLAGS= -O1 -w-par -w-stu -w-ccc -w-rch
-!endif
-# -O2 enables full code optimization (for pre-3.0 Borland C++, use -O -G -Z).
-# -O2 is buggy in Borland OS/2 C++ revision 2.0, so use -O1 there for now.
-# If you have Borland OS/2 C++ revision 1.0, use -O or no optimization at all.
-# -mm selects medium memory model (near data, far code pointers; DOS only!)
-# -w-par suppresses warnings about unused function parameters
-# -w-stu suppresses warnings about incomplete structures
-# -w-ccc suppresses warnings about compile-time-constant conditions
-# -w-rch suppresses warnings about unreachable code
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Link-time cc options:
-!if $d(DOS)
-LDFLAGS= -mm
-# memory model option here must match CFLAGS!
-!else
-LDFLAGS=
-# -lai full-screen app
-# -lc case-significant link
-!endif
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.
-# For DOS, we recommend jmemdos.c and jmemdosa.asm.
-# For OS/2, we recommend jmemnobs.c (flat memory!)
-# SYSDEPMEMLIB must list the same files with "+" signs for the librarian.
-!if $d(DOS)
-SYSDEPMEM= jmemdos.obj jmemdosa.obj
-SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj
-!else
-SYSDEPMEM= jmemnobs.obj
-SYSDEPMEMLIB= +jmemnobs.obj
-!endif
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
- jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
- jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
- jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
- jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
- jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
- jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
- jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
- rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
- rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
- jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
- wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
- coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
- makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
- makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
- maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
- makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
- jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
- jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
- testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
- $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj \
- jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj \
- jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj \
- jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
-# decompression library object files
-DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj \
- jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj \
- jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj \
- jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj \
- jquant1.obj jquant2.obj jdmerge.obj
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
- rdswitch.obj cdjpeg.obj
-DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
- rdcolmap.obj cdjpeg.obj
-TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
-
-
-all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
-
-libjpeg.lib: $(LIBOBJECTS)
- - del libjpeg.lib
- tlib libjpeg.lib /E /C @&&|
-+jcapimin.obj +jcapistd.obj +jctrans.obj +jcparam.obj +jdatadst.obj &
-+jcinit.obj +jcmaster.obj +jcmarker.obj +jcmainct.obj +jcprepct.obj &
-+jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj +jcphuff.obj &
-+jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj +jfdctint.obj +jdapimin.obj &
-+jdapistd.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj +jdinput.obj &
-+jdmarker.obj +jdhuff.obj +jdphuff.obj +jdmainct.obj +jdcoefct.obj &
-+jdpostct.obj +jddctmgr.obj +jidctfst.obj +jidctflt.obj +jidctint.obj &
-+jidctred.obj +jdsample.obj +jdcolor.obj +jquant1.obj +jquant2.obj &
-+jdmerge.obj +jcomapi.obj +jutils.obj +jerror.obj +jmemmgr.obj &
-$(SYSDEPMEMLIB)
-|
-
-cjpeg.exe: $(COBJECTS) libjpeg.lib
- $(CC) $(LDFLAGS) -ecjpeg.exe $(COBJECTS) libjpeg.lib
-
-djpeg.exe: $(DOBJECTS) libjpeg.lib
- $(CC) $(LDFLAGS) -edjpeg.exe $(DOBJECTS) libjpeg.lib
-
-jpegtran.exe: $(TROBJECTS) libjpeg.lib
- $(CC) $(LDFLAGS) -ejpegtran.exe $(TROBJECTS) libjpeg.lib
-
-rdjpgcom.exe: rdjpgcom.c
-!if $d(DOS)
- $(CC) -ms -O rdjpgcom.c
-!else
- $(CC) $(CFLAGS) rdjpgcom.c
-!endif
-
-# On DOS, wrjpgcom needs large model so it can malloc a 64K chunk
-wrjpgcom.exe: wrjpgcom.c
-!if $d(DOS)
- $(CC) -ml -O wrjpgcom.c
-!else
- $(CC) $(CFLAGS) wrjpgcom.c
-!endif
-
-# This "{}" syntax allows Borland Make to "batch" source files.
-# In this way, each run of the compiler can build many modules.
-.c.obj:
- $(CC) $(CFLAGS) -c{ $<}
-
-jconfig.h: jconfig.doc
- echo You must prepare a system-dependent jconfig.h file.
- echo Please read the installation directions in install.doc.
- exit 1
-
-clean:
- - del *.obj
- - del libjpeg.lib
- - del cjpeg.exe
- - del djpeg.exe
- - del jpegtran.exe
- - del rdjpgcom.exe
- - del wrjpgcom.exe
- - del testout*.*
-
-test: cjpeg.exe djpeg.exe jpegtran.exe
- - del testout*.*
- djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
- djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg
- cjpeg -dct int -outfile testout.jpg testimg.ppm
- djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
- cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
- jpegtran -outfile testoutt.jpg testprog.jpg
-!if $d(DOS)
- fc /b testimg.ppm testout.ppm
- fc /b testimg.bmp testout.bmp
- fc /b testimg.jpg testout.jpg
- fc /b testimg.ppm testoutp.ppm
- fc /b testimgp.jpg testoutp.jpg
- fc /b testorig.jpg testoutt.jpg
-!else
- echo n > n.tmp
- comp testimg.ppm testout.ppm < n.tmp
- comp testimg.bmp testout.bmp < n.tmp
- comp testimg.jpg testout.jpg < n.tmp
- comp testimg.ppm testoutp.ppm < n.tmp
- comp testimgp.jpg testoutp.jpg < n.tmp
- comp testorig.jpg testoutt.jpg < n.tmp
- del n.tmp
-!endif
-
-
-jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.obj: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.obj: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.obj: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-jmemdosa.obj: jmemdosa.asm
- tasm /mx jmemdosa.asm
diff --git a/libjpegtwrp/makefile.cfg b/libjpegtwrp/makefile.cfg
deleted file mode 100644
index f25e42e3e..000000000
--- a/libjpegtwrp/makefile.cfg
+++ /dev/null
@@ -1,319 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# makefile.cfg is edited by configure to produce a custom Makefile.
-
-# Read installation instructions before saying "make" !!
-
-# For compiling with source and object files in different directories.
-srcdir = @srcdir@
-VPATH = @srcdir@
-
-# Where to install the programs and man pages.
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-bindir = $(exec_prefix)/bin
-libdir = $(exec_prefix)/lib
-includedir = $(prefix)/include
-binprefix =
-manprefix =
-manext = 1
-mandir = $(prefix)/man/man$(manext)
-
-# The name of your C compiler:
-CC= @CC@
-
-# You may need to adjust these cc options:
-CFLAGS= @CFLAGS@ @CPPFLAGS@ @INCLUDEFLAGS@
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-# However, any special defines for ansi2knr.c may be included here:
-ANSI2KNRFLAGS= @ANSI2KNRFLAGS@
-
-# Link-time cc options:
-LDFLAGS= @LDFLAGS@
-
-# To link any special libraries, add the necessary -l commands here.
-LDLIBS= @LIBS@
-
-# If using GNU libtool, LIBTOOL references it; if not, LIBTOOL is empty.
-LIBTOOL = @LIBTOOL@
-# $(O) expands to "lo" if using libtool, plain "o" if not.
-# Similarly, $(A) expands to "la" or "a".
-O = @O@
-A = @A@
-
-# Library version ID; libtool uses this for the shared library version number.
-# Note: we suggest this match the macro of the same name in jpeglib.h.
-JPEG_LIB_VERSION = @JPEG_LIB_VERSION@
-
-# Put here the object file name for the correct system-dependent memory
-# manager file. For Unix this is usually jmemnobs.o, but you may want
-# to use jmemansi.o or jmemname.o if you have limited swap space.
-SYSDEPMEM= @MEMORYMGR@
-
-# miscellaneous OS-dependent stuff
-SHELL= /bin/sh
-# linker
-LN= @LN@
-# file deletion command
-RM= rm -f
-# directory creation command
-MKDIR= mkdir
-# library (.a) file creation command
-AR= ar rc
-# second step in .a creation (use "touch" if not needed)
-AR2= @RANLIB@
-# installation program
-INSTALL= @INSTALL@
-INSTALL_PROGRAM= @INSTALL_PROGRAM@
-INSTALL_LIB= @INSTALL_LIB@
-INSTALL_DATA= @INSTALL_DATA@
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
- jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
- jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
- jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
- jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
- jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
- jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
- jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
- rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
- rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
- jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
- wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
- coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
- makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
- makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
- maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
- makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
- jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
- jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
- testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
- $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.$(O) jutils.$(O) jerror.$(O) jmemmgr.$(O) $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.$(O) jcapistd.$(O) jctrans.$(O) jcparam.$(O) \
- jdatadst.$(O) jcinit.$(O) jcmaster.$(O) jcmarker.$(O) jcmainct.$(O) \
- jcprepct.$(O) jccoefct.$(O) jccolor.$(O) jcsample.$(O) jchuff.$(O) \
- jcphuff.$(O) jcdctmgr.$(O) jfdctfst.$(O) jfdctflt.$(O) \
- jfdctint.$(O)
-# decompression library object files
-DLIBOBJECTS= jdapimin.$(O) jdapistd.$(O) jdtrans.$(O) jdatasrc.$(O) \
- jdmaster.$(O) jdinput.$(O) jdmarker.$(O) jdhuff.$(O) jdphuff.$(O) \
- jdmainct.$(O) jdcoefct.$(O) jdpostct.$(O) jddctmgr.$(O) \
- jidctfst.$(O) jidctflt.$(O) jidctint.$(O) jidctred.$(O) \
- jdsample.$(O) jdcolor.$(O) jquant1.$(O) jquant2.$(O) jdmerge.$(O)
-# These objectfiles are included in libjpeg.a
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.$(O) rdppm.$(O) rdgif.$(O) rdtarga.$(O) rdrle.$(O) \
- rdbmp.$(O) rdswitch.$(O) cdjpeg.$(O)
-DOBJECTS= djpeg.$(O) wrppm.$(O) wrgif.$(O) wrtarga.$(O) wrrle.$(O) \
- wrbmp.$(O) rdcolmap.$(O) cdjpeg.$(O)
-TROBJECTS= jpegtran.$(O) rdswitch.$(O) cdjpeg.$(O) transupp.$(O)
-
-
-all: @A2K_DEPS@ libjpeg.$(A) cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-
-# Special compilation rules to support ansi2knr and libtool.
-.SUFFIXES: .lo .la
-
-# How to compile with libtool.
-@COM_LT@.c.lo:
-@COM_LT@ $(LIBTOOL) --mode=compile $(CC) $(CFLAGS) -c $(srcdir)/$*.c
-
-# How to use ansi2knr, when not using libtool.
-@COM_A2K@.c.o:
-@COM_A2K@ ./ansi2knr $(srcdir)/$*.c knr/$*.c
-@COM_A2K@ $(CC) $(CFLAGS) -c knr/$*.c
-@COM_A2K@ $(RM) knr/$*.c
-
-# How to use ansi2knr AND libtool.
-@COM_A2K@.c.lo:
-@COM_A2K@ ./ansi2knr $(srcdir)/$*.c knr/$*.c
-@COM_A2K@ $(LIBTOOL) --mode=compile $(CC) $(CFLAGS) -c knr/$*.c
-@COM_A2K@ $(RM) knr/$*.c
-
-ansi2knr: ansi2knr.c
- $(CC) $(CFLAGS) $(ANSI2KNRFLAGS) -o ansi2knr $(srcdir)/ansi2knr.c
- $(MKDIR) knr
-
-# the library:
-
-# without libtool:
-libjpeg.a: @A2K_DEPS@ $(LIBOBJECTS)
- $(RM) libjpeg.a
- $(AR) libjpeg.a $(LIBOBJECTS)
- $(AR2) libjpeg.a
-
-# with libtool:
-libjpeg.la: @A2K_DEPS@ $(LIBOBJECTS)
- $(LIBTOOL) --mode=link $(CC) -o libjpeg.la $(LIBOBJECTS) \
- -rpath $(libdir) -version-info $(JPEG_LIB_VERSION)
-
-# sample programs:
-
-cjpeg: $(COBJECTS) libjpeg.$(A)
- $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.$(A) $(LDLIBS)
-
-djpeg: $(DOBJECTS) libjpeg.$(A)
- $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.$(A) $(LDLIBS)
-
-jpegtran: $(TROBJECTS) libjpeg.$(A)
- $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.$(A) $(LDLIBS)
-
-rdjpgcom: rdjpgcom.$(O)
- $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.$(O) $(LDLIBS)
-
-wrjpgcom: wrjpgcom.$(O)
- $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.$(O) $(LDLIBS)
-
-# Installation rules:
-
-install: cjpeg djpeg jpegtran rdjpgcom wrjpgcom @FORCE_INSTALL_LIB@
- $(INSTALL_PROGRAM) cjpeg $(bindir)/$(binprefix)cjpeg
- $(INSTALL_PROGRAM) djpeg $(bindir)/$(binprefix)djpeg
- $(INSTALL_PROGRAM) jpegtran $(bindir)/$(binprefix)jpegtran
- $(INSTALL_PROGRAM) rdjpgcom $(bindir)/$(binprefix)rdjpgcom
- $(INSTALL_PROGRAM) wrjpgcom $(bindir)/$(binprefix)wrjpgcom
- $(INSTALL_DATA) $(srcdir)/cjpeg.1 $(mandir)/$(manprefix)cjpeg.$(manext)
- $(INSTALL_DATA) $(srcdir)/djpeg.1 $(mandir)/$(manprefix)djpeg.$(manext)
- $(INSTALL_DATA) $(srcdir)/jpegtran.1 $(mandir)/$(manprefix)jpegtran.$(manext)
- $(INSTALL_DATA) $(srcdir)/rdjpgcom.1 $(mandir)/$(manprefix)rdjpgcom.$(manext)
- $(INSTALL_DATA) $(srcdir)/wrjpgcom.1 $(mandir)/$(manprefix)wrjpgcom.$(manext)
-
-install-lib: libjpeg.$(A) install-headers
- $(INSTALL_LIB) libjpeg.$(A) $(libdir)/$(binprefix)libjpeg.$(A)
-
-install-headers: jconfig.h
- $(INSTALL_DATA) jconfig.h $(includedir)/jconfig.h
- $(INSTALL_DATA) $(srcdir)/jpeglib.h $(includedir)/jpeglib.h
- $(INSTALL_DATA) $(srcdir)/jmorecfg.h $(includedir)/jmorecfg.h
- $(INSTALL_DATA) $(srcdir)/jerror.h $(includedir)/jerror.h
-
-clean:
- $(RM) *.o *.lo libjpeg.a libjpeg.la
- $(RM) cjpeg djpeg jpegtran rdjpgcom wrjpgcom
- $(RM) ansi2knr core testout* config.log config.status
- $(RM) -r knr .libs _libs
-
-distclean: clean
- $(RM) Makefile jconfig.h libtool config.cache
-
-test: cjpeg djpeg jpegtran
- $(RM) testout*
- ./djpeg -dct int -ppm -outfile testout.ppm $(srcdir)/testorig.jpg
- ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp $(srcdir)/testorig.jpg
- ./cjpeg -dct int -outfile testout.jpg $(srcdir)/testimg.ppm
- ./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg
- ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm
- ./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg
- cmp $(srcdir)/testimg.ppm testout.ppm
- cmp $(srcdir)/testimg.bmp testout.bmp
- cmp $(srcdir)/testimg.jpg testout.jpg
- cmp $(srcdir)/testimg.ppm testoutp.ppm
- cmp $(srcdir)/testimgp.jpg testoutp.jpg
- cmp $(srcdir)/testorig.jpg testoutt.jpg
-
-check: test
-
-# Mistake catcher:
-
-jconfig.h: jconfig.doc
- echo You must prepare a system-dependent jconfig.h file.
- echo Please read the installation directions in install.doc.
- exit 1
-
-# GNU Make likes to know which target names are not really files to be made:
-.PHONY: all install install-lib install-headers clean distclean test check
-
-
-jcapimin.$(O): jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.$(O): jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.$(O): jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.$(O): jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.$(O): jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.$(O): jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.$(O): jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.$(O): jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.$(O): jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.$(O): jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.$(O): jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.$(O): jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.$(O): jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.$(O): jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.$(O): jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.$(O): jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.$(O): jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.$(O): jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.$(O): jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.$(O): jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.$(O): jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.$(O): jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.$(O): jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.$(O): jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.$(O): jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.$(O): jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.$(O): jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.$(O): jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.$(O): jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.$(O): jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.$(O): jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.$(O): jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.$(O): jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.$(O): jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.$(O): jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.$(O): jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.$(O): jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.$(O): jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.$(O): jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.$(O): jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.$(O): jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.$(O): jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.$(O): jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.$(O): jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.$(O): jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.$(O): jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.$(O): jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.$(O): jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.$(O): jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.$(O): jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.$(O): cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.$(O): djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.$(O): jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.$(O): rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.$(O): wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.$(O): cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.$(O): rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.$(O): rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.$(O): transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.$(O): rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.$(O): wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.$(O): rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.$(O): wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.$(O): rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.$(O): wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.$(O): rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.$(O): wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.$(O): rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.$(O): wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/libjpegtwrp/makefile.dj b/libjpegtwrp/makefile.dj
deleted file mode 100644
index f766d25e3..000000000
--- a/libjpegtwrp/makefile.dj
+++ /dev/null
@@ -1,220 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for DJGPP (Delorie's GNU C port on MS-DOS), v2.0 or later.
-# Thanks to Frank J. Donahoe for this version.
-
-# Read installation instructions before saying "make" !!
-
-# The name of your C compiler:
-CC= gcc
-
-# You may need to adjust these cc options:
-CFLAGS= -O2 -Wall -I.
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Link-time cc options:
-LDFLAGS= -s
-
-# To link any special libraries, add the necessary -l commands here.
-LDLIBS=
-
-# Put here the object file name for the correct system-dependent memory
-# manager file. For DJGPP this is usually jmemnobs.o, but you could
-# use jmemname.o if you want to use named temp files instead of swap space.
-SYSDEPMEM= jmemnobs.o
-
-# miscellaneous OS-dependent stuff
-# linker
-LN= $(CC)
-# file deletion command
-RM= del
-# library (.a) file creation command
-AR= ar rc
-# second step in .a creation (use "touch" if not needed)
-AR2= ranlib
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
- jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
- jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
- jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
- jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
- jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
- jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
- jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
- rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
- rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
- jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
- wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
- coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
- makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
- makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
- maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
- makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
- jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
- jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
- testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
- $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
- jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
- jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
- jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
- jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
- jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
- jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.a
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
- cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
- cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o
-
-
-all: libjpeg.a cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
-
-libjpeg.a: $(LIBOBJECTS)
- $(RM) libjpeg.a
- $(AR) libjpeg.a $(LIBOBJECTS)
- $(AR2) libjpeg.a
-
-cjpeg.exe: $(COBJECTS) libjpeg.a
- $(LN) $(LDFLAGS) -o cjpeg.exe $(COBJECTS) libjpeg.a $(LDLIBS)
-
-djpeg.exe: $(DOBJECTS) libjpeg.a
- $(LN) $(LDFLAGS) -o djpeg.exe $(DOBJECTS) libjpeg.a $(LDLIBS)
-
-jpegtran.exe: $(TROBJECTS) libjpeg.a
- $(LN) $(LDFLAGS) -o jpegtran.exe $(TROBJECTS) libjpeg.a $(LDLIBS)
-
-rdjpgcom.exe: rdjpgcom.o
- $(LN) $(LDFLAGS) -o rdjpgcom.exe rdjpgcom.o $(LDLIBS)
-
-wrjpgcom.exe: wrjpgcom.o
- $(LN) $(LDFLAGS) -o wrjpgcom.exe wrjpgcom.o $(LDLIBS)
-
-jconfig.h: jconfig.doc
- echo You must prepare a system-dependent jconfig.h file.
- echo Please read the installation directions in install.doc.
- exit 1
-
-clean:
- $(RM) *.o
- $(RM) cjpeg.exe
- $(RM) djpeg.exe
- $(RM) jpegtran.exe
- $(RM) rdjpgcom.exe
- $(RM) wrjpgcom.exe
- $(RM) libjpeg.a
- $(RM) testout*.*
-
-test: cjpeg.exe djpeg.exe jpegtran.exe
- $(RM) testout*.*
- ./djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
- ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg
- ./cjpeg -dct int -outfile testout.jpg testimg.ppm
- ./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
- ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
- ./jpegtran -outfile testoutt.jpg testprog.jpg
- fc /b testimg.ppm testout.ppm
- fc /b testimg.bmp testout.bmp
- fc /b testimg.jpg testout.jpg
- fc /b testimg.ppm testoutp.ppm
- fc /b testimgp.jpg testoutp.jpg
- fc /b testorig.jpg testoutt.jpg
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/libjpegtwrp/makefile.manx b/libjpegtwrp/makefile.manx
deleted file mode 100644
index 4cb42d17c..000000000
--- a/libjpegtwrp/makefile.manx
+++ /dev/null
@@ -1,214 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for Amiga systems using Manx Aztec C ver 5.x.
-# Thanks to D.J. James (djjames@cup.portal.com) for this version.
-
-# Read installation instructions before saying "make" !!
-
-# The name of your C compiler:
-CC= cc
-
-# You may need to adjust these cc options:
-# Uncomment for generic 68000 code (will work on any Amiga)
-ARCHFLAGS= -sn
-
-# Uncomment for 68020/68030 code (faster, but won't run on 68000 CPU)
-#ARCHFLAGS= -c2
-
-CFLAGS= -MC -MD $(ARCHFLAGS) -spfam -r4
-
-# Link-time cc options:
-LDFLAGS= -g
-
-# To link any special libraries, add the necessary -l commands here.
-LDLIBS= -lml -lcl
-
-# Put here the object file name for the correct system-dependent memory
-# manager file. For Amiga we recommend jmemname.o.
-SYSDEPMEM= jmemname.o
-
-# miscellaneous OS-dependent stuff
-# linker
-LN= ln
-# file deletion command
-RM= delete quiet
-# library (.lib) file creation command
-AR= lb
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
- jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
- jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
- jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
- jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
- jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
- jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
- jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
- rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
- rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
- jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
- wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
- coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
- makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
- makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
- maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
- makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
- jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
- jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
- testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
- $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
- jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
- jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
- jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
- jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
- jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
- jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
- cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
- cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o
-
-
-all: libjpeg.lib cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-
-libjpeg.lib: $(LIBOBJECTS)
- -$(RM) libjpeg.lib
- $(AR) libjpeg.lib $(LIBOBJECTS)
-
-cjpeg: $(COBJECTS) libjpeg.lib
- $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.lib $(LDLIBS)
-
-djpeg: $(DOBJECTS) libjpeg.lib
- $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.lib $(LDLIBS)
-
-jpegtran: $(TROBJECTS) libjpeg.lib
- $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.lib $(LDLIBS)
-
-rdjpgcom: rdjpgcom.o
- $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS)
-
-wrjpgcom: wrjpgcom.o
- $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS)
-
-jconfig.h: jconfig.doc
- echo You must prepare a system-dependent jconfig.h file.
- echo Please read the installation directions in install.doc.
- exit 1
-
-clean:
- -$(RM) *.o cjpeg djpeg jpegtran libjpeg.lib rdjpgcom wrjpgcom
- -$(RM) core testout*.*
-
-test: cjpeg djpeg jpegtran
- -$(RM) testout*.*
- djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
- djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg
- cjpeg -dct int -outfile testout.jpg testimg.ppm
- djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
- cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
- jpegtran -outfile testoutt.jpg testprog.jpg
- cmp testimg.ppm testout.ppm
- cmp testimg.bmp testout.bmp
- cmp testimg.jpg testout.jpg
- cmp testimg.ppm testoutp.ppm
- cmp testimgp.jpg testoutp.jpg
- cmp testorig.jpg testoutt.jpg
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/libjpegtwrp/makefile.mc6 b/libjpegtwrp/makefile.mc6
deleted file mode 100644
index 6aff05464..000000000
--- a/libjpegtwrp/makefile.mc6
+++ /dev/null
@@ -1,249 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for Microsoft C for MS-DOS, version 6.00A and up.
-# Use NMAKE, not Microsoft's brain-damaged MAKE.
-# Thanks to Alan Wright and Chris Turner of Olivetti Research Ltd.
-
-# Read installation instructions before saying "nmake" !!
-
-# You may need to adjust these compiler options:
-CFLAGS = -AM -Oecigt -Gs -W3
-# -AM medium memory model (or use -AS for small model, if you remove features)
-# -Oecigt -Gs maximum safe optimisation (-Ol has bugs in MSC 6.00A)
-# -W3 warning level 3
-# You might also want to add -G2 if you have an 80286, etc.
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Jan-Herman Buining suggests the following switches for MS C 8.0 and a 486:
-# CFLAGS = /AM /f- /FPi87 /G3 /Gs /Gy /Ob1 /Oc /Oe /Og /Oi /Ol /On /Oo /Ot \
-# /OV4 /W3
-# except for jquant1.c, which must be compiled with /Oo- to avoid a compiler
-# crash.
-
-# Ingar Steinsland suggests the following switches when building
-# a 16-bit Windows DLL:
-# CFLAGS = -ALw -Gsw -Zpe -W3 -O2 -Zi -Zd
-
-# Put here the object file name for the correct system-dependent memory
-# manager file. For DOS, we recommend jmemdos.c and jmemdosa.asm.
-# (But not for Windows; see install.doc if you use this makefile for Windows.)
-SYSDEPMEM= jmemdos.obj jmemdosa.obj
-# SYSDEPMEMLIB must list the same files with "+" signs for the librarian.
-SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
- jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
- jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
- jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
- jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
- jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
- jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
- jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
- rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
- rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
- jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
- wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
- coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
- makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
- makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
- maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
- makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
- jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
- jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
- testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
- $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj \
- jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj \
- jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj \
- jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
-# decompression library object files
-DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj \
- jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj \
- jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj \
- jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj \
- jquant1.obj jquant2.obj jdmerge.obj
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
- rdswitch.obj cdjpeg.obj
-DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
- rdcolmap.obj cdjpeg.obj
-TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
-
-# need linker response file because file list > 128 chars
-RFILE = libjpeg.ans
-
-
-all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
-
-libjpeg.lib: $(LIBOBJECTS) $(RFILE)
- del libjpeg.lib
- lib @$(RFILE)
-
-# linker response file for building libjpeg.lib
-$(RFILE) : makefile
- del $(RFILE)
- echo libjpeg.lib >$(RFILE)
-# silly want-to-create-it prompt:
- echo y >>$(RFILE)
- echo +jcapimin.obj +jcapistd.obj +jctrans.obj +jcparam.obj & >>$(RFILE)
- echo +jdatadst.obj +jcinit.obj +jcmaster.obj +jcmarker.obj & >>$(RFILE)
- echo +jcmainct.obj +jcprepct.obj +jccoefct.obj & >>$(RFILE)
- echo +jccolor.obj +jcsample.obj +jchuff.obj +jcphuff.obj & >>$(RFILE)
- echo +jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj & >>$(RFILE)
- echo +jfdctint.obj +jdapimin.obj +jdapistd.obj & >>$(RFILE)
- echo +jdtrans.obj +jdatasrc.obj +jdmaster.obj +jdinput.obj & >>$(RFILE)
- echo +jdmarker.obj +jdhuff.obj +jdphuff.obj +jdmainct.obj & >>$(RFILE)
- echo +jdcoefct.obj +jdpostct.obj +jddctmgr.obj & >>$(RFILE)
- echo +jidctfst.obj +jidctflt.obj +jidctint.obj & >>$(RFILE)
- echo +jidctred.obj +jdsample.obj +jdcolor.obj +jquant1.obj & >>$(RFILE)
- echo +jquant2.obj +jdmerge.obj +jcomapi.obj +jutils.obj & >>$(RFILE)
- echo +jerror.obj +jmemmgr.obj & >>$(RFILE)
- echo $(SYSDEPMEMLIB) ; >>$(RFILE)
-
-cjpeg.exe: $(COBJECTS) libjpeg.lib
- echo $(COBJECTS) >cjpeg.lst
- link /STACK:4096 /EXEPACK @cjpeg.lst, cjpeg.exe, , libjpeg.lib, ;
- del cjpeg.lst
-
-djpeg.exe: $(DOBJECTS) libjpeg.lib
- echo $(DOBJECTS) >djpeg.lst
- link /STACK:4096 /EXEPACK @djpeg.lst, djpeg.exe, , libjpeg.lib, ;
- del djpeg.lst
-
-jpegtran.exe: $(TROBJECTS) libjpeg.lib
- link /STACK:4096 /EXEPACK $(TROBJECTS), jpegtran.exe, , libjpeg.lib, ;
-
-rdjpgcom.exe: rdjpgcom.c
- $(CC) -AS -O -W3 rdjpgcom.c
-
-# wrjpgcom needs large model so it can malloc a 64K chunk
-wrjpgcom.exe: wrjpgcom.c
- $(CC) -AL -O -W3 wrjpgcom.c
-
-jconfig.h: jconfig.doc
- echo You must prepare a system-dependent jconfig.h file.
- echo Please read the installation directions in install.doc.
- exit 1
-
-clean:
- del *.obj
- del libjpeg.lib
- del cjpeg.exe
- del djpeg.exe
- del jpegtran.exe
- del rdjpgcom.exe
- del wrjpgcom.exe
- del testout*.*
-
-test: cjpeg.exe djpeg.exe jpegtran.exe
- del testout*.*
- djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
- djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg
- cjpeg -dct int -outfile testout.jpg testimg.ppm
- djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
- cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
- jpegtran -outfile testoutt.jpg testprog.jpg
- fc /b testimg.ppm testout.ppm
- fc /b testimg.bmp testout.bmp
- fc /b testimg.jpg testout.jpg
- fc /b testimg.ppm testoutp.ppm
- fc /b testimgp.jpg testoutp.jpg
- fc /b testorig.jpg testoutt.jpg
-
-
-jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.obj: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.obj: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.obj: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-jmemdosa.obj : jmemdosa.asm
- masm /mx $*;
diff --git a/libjpegtwrp/makefile.mms b/libjpegtwrp/makefile.mms
deleted file mode 100644
index cf130e5b9..000000000
--- a/libjpegtwrp/makefile.mms
+++ /dev/null
@@ -1,218 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for use with MMS on Digital VMS systems.
-# Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu)
-# and Tim Bell (tbell@netcom.com) for their help.
-
-# Read installation instructions before saying "MMS" !!
-
-# You may need to adjust these cc options:
-CFLAGS= $(CFLAGS) /NoDebug /Optimize
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via /Define switches here.
-.ifdef ALPHA
-OPT=
-.else
-OPT= ,Sys$Disk:[]MAKVMS.OPT/Option
-.endif
-
-# Put here the object file name for the correct system-dependent memory
-# manager file. For Unix this is usually jmemnobs.o, but you may want
-# to use jmemansi.o or jmemname.o if you have limited swap space.
-SYSDEPMEM= jmemnobs.obj
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
- jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
- jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
- jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
- jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
- jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
- jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
- jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
- rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
- rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
- jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
- wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
- coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
- makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
- makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
- maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
- makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
- jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
- jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
- testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
- $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj \
- jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj \
- jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj \
- jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
-# decompression library object files
-DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj \
- jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj \
- jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj \
- jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj \
- jquant1.obj jquant2.obj jdmerge.obj
-# These objectfiles are included in libjpeg.olb
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
- rdswitch.obj cdjpeg.obj
-DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
- rdcolmap.obj cdjpeg.obj
-TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
-# objectfile lists with commas --- what a crock
-COBJLIST= cjpeg.obj,rdppm.obj,rdgif.obj,rdtarga.obj,rdrle.obj,rdbmp.obj,\
- rdswitch.obj,cdjpeg.obj
-DOBJLIST= djpeg.obj,wrppm.obj,wrgif.obj,wrtarga.obj,wrrle.obj,wrbmp.obj,\
- rdcolmap.obj,cdjpeg.obj
-TROBJLIST= jpegtran.obj,rdswitch.obj,cdjpeg.obj,transupp.obj
-LIBOBJLIST= jcapimin.obj,jcapistd.obj,jctrans.obj,jcparam.obj,jdatadst.obj,\
- jcinit.obj,jcmaster.obj,jcmarker.obj,jcmainct.obj,jcprepct.obj,\
- jccoefct.obj,jccolor.obj,jcsample.obj,jchuff.obj,jcphuff.obj,\
- jcdctmgr.obj,jfdctfst.obj,jfdctflt.obj,jfdctint.obj,jdapimin.obj,\
- jdapistd.obj,jdtrans.obj,jdatasrc.obj,jdmaster.obj,jdinput.obj,\
- jdmarker.obj,jdhuff.obj,jdphuff.obj,jdmainct.obj,jdcoefct.obj,\
- jdpostct.obj,jddctmgr.obj,jidctfst.obj,jidctflt.obj,jidctint.obj,\
- jidctred.obj,jdsample.obj,jdcolor.obj,jquant1.obj,jquant2.obj,\
- jdmerge.obj,jcomapi.obj,jutils.obj,jerror.obj,jmemmgr.obj,$(SYSDEPMEM)
-
-
-.first
- @- Define /NoLog Sys Sys$Library
-
-ALL : libjpeg.olb cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
- @ Continue
-
-libjpeg.olb : $(LIBOBJECTS)
- Library /Create libjpeg.olb $(LIBOBJLIST)
-
-cjpeg.exe : $(COBJECTS) libjpeg.olb
- $(LINK) $(LFLAGS) /Executable = cjpeg.exe $(COBJLIST),libjpeg.olb/Library$(OPT)
-
-djpeg.exe : $(DOBJECTS) libjpeg.olb
- $(LINK) $(LFLAGS) /Executable = djpeg.exe $(DOBJLIST),libjpeg.olb/Library$(OPT)
-
-jpegtran.exe : $(TROBJECTS) libjpeg.olb
- $(LINK) $(LFLAGS) /Executable = jpegtran.exe $(TROBJLIST),libjpeg.olb/Library$(OPT)
-
-rdjpgcom.exe : rdjpgcom.obj
- $(LINK) $(LFLAGS) /Executable = rdjpgcom.exe rdjpgcom.obj$(OPT)
-
-wrjpgcom.exe : wrjpgcom.obj
- $(LINK) $(LFLAGS) /Executable = wrjpgcom.exe wrjpgcom.obj$(OPT)
-
-jconfig.h : jconfig.vms
- @- Copy jconfig.vms jconfig.h
-
-clean :
- @- Set Protection = Owner:RWED *.*;-1
- @- Set Protection = Owner:RWED *.OBJ
- - Purge /NoLog /NoConfirm *.*
- - Delete /NoLog /NoConfirm *.OBJ;
-
-test : cjpeg.exe djpeg.exe jpegtran.exe
- mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
- mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg
- mcr sys$disk:[]cjpeg -dct int -outfile testout.jpg testimg.ppm
- mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
- mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
- mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg
- - Backup /Compare/Log testimg.ppm testout.ppm
- - Backup /Compare/Log testimg.bmp testout.bmp
- - Backup /Compare/Log testimg.jpg testout.jpg
- - Backup /Compare/Log testimg.ppm testoutp.ppm
- - Backup /Compare/Log testimgp.jpg testoutp.jpg
- - Backup /Compare/Log testorig.jpg testoutt.jpg
-
-
-jcapimin.obj : jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.obj : jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.obj : jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.obj : jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.obj : jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.obj : jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.obj : jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.obj : jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.obj : jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.obj : jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.obj : jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.obj : jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.obj : jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.obj : jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.obj : jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.obj : jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.obj : jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.obj : jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.obj : jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.obj : jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.obj : jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.obj : jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.obj : jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.obj : jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.obj : jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.obj : jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.obj : jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.obj : jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.obj : jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.obj : jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.obj : jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.obj : jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.obj : jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.obj : jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.obj : jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.obj : jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.obj : jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.obj : jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.obj : jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.obj : jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.obj : jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.obj : jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.obj : jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.obj : jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.obj : jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.obj : jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.obj : jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.obj : jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.obj : jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.obj : jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.obj : cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.obj : djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.obj : jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.obj : rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.obj : wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.obj : cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.obj : rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.obj : rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.obj : transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.obj : rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.obj : wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.obj : rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.obj : wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.obj : rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.obj : wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.obj : rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.obj : wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.obj : rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.obj : wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/libjpegtwrp/makefile.sas b/libjpegtwrp/makefile.sas
deleted file mode 100644
index f296faf06..000000000
--- a/libjpegtwrp/makefile.sas
+++ /dev/null
@@ -1,252 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for Amiga systems using SAS C 6.0 and up.
-# Thanks to Ed Hanway, Mark Rinfret, and Jim Zepeda.
-
-# Read installation instructions before saying "make" !!
-
-# The name of your C compiler:
-CC= sc
-
-# You may need to adjust these cc options:
-# Uncomment the following lines for generic 680x0 version
-ARCHFLAGS= cpu=any
-SUFFIX=
-
-# Uncomment the following lines for 68030-only version
-#ARCHFLAGS= cpu=68030
-#SUFFIX=.030
-
-CFLAGS= nostackcheck data=near parms=register optimize $(ARCHFLAGS) \
- ignore=104 ignore=304 ignore=306
-# ignore=104 disables warnings for mismatched const qualifiers
-# ignore=304 disables warnings for variables being optimized out
-# ignore=306 disables warnings for the inlining of functions
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via define switches here.
-
-# Link-time cc options:
-LDFLAGS= SC SD ND BATCH
-
-# To link any special libraries, add the necessary commands here.
-LDLIBS= LIB:scm.lib LIB:sc.lib
-
-# Put here the object file name for the correct system-dependent memory
-# manager file. For Amiga we recommend jmemname.o.
-SYSDEPMEM= jmemname.o
-
-# miscellaneous OS-dependent stuff
-# linker
-LN= slink
-# file deletion command
-RM= delete quiet
-# library (.lib) file creation command
-AR= oml
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
- jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
- jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
- jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
- jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
- jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
- jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
- jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
- rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
- rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
- jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
- wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
- coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
- makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
- makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
- maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
- makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
- jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
- jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
- testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
- $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
- jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
- jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
- jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
- jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
- jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
- jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
- cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
- cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o
-
-
-all: libjpeg.lib cjpeg$(SUFFIX) djpeg$(SUFFIX) jpegtran$(SUFFIX) rdjpgcom$(SUFFIX) wrjpgcom$(SUFFIX)
-
-# note: do several AR steps to avoid command line length limitations
-
-libjpeg.lib: $(LIBOBJECTS)
- -$(RM) libjpeg.lib
- $(AR) libjpeg.lib r $(CLIBOBJECTS)
- $(AR) libjpeg.lib r $(DLIBOBJECTS)
- $(AR) libjpeg.lib r $(COMOBJECTS)
-
-cjpeg$(SUFFIX): $(COBJECTS) libjpeg.lib
- $(LN) <WITH <
-$(LDFLAGS)
-TO cjpeg$(SUFFIX)
-FROM LIB:c.o $(COBJECTS)
-LIB libjpeg.lib $(LDLIBS)
-<
-
-djpeg$(SUFFIX): $(DOBJECTS) libjpeg.lib
- $(LN) <WITH <
-$(LDFLAGS)
-TO djpeg$(SUFFIX)
-FROM LIB:c.o $(DOBJECTS)
-LIB libjpeg.lib $(LDLIBS)
-<
-
-jpegtran$(SUFFIX): $(TROBJECTS) libjpeg.lib
- $(LN) <WITH <
-$(LDFLAGS)
-TO jpegtran$(SUFFIX)
-FROM LIB:c.o $(TROBJECTS)
-LIB libjpeg.lib $(LDLIBS)
-<
-
-rdjpgcom$(SUFFIX): rdjpgcom.o
- $(LN) <WITH <
-$(LDFLAGS)
-TO rdjpgcom$(SUFFIX)
-FROM LIB:c.o rdjpgcom.o
-LIB $(LDLIBS)
-<
-
-wrjpgcom$(SUFFIX): wrjpgcom.o
- $(LN) <WITH <
-$(LDFLAGS)
-TO wrjpgcom$(SUFFIX)
-FROM LIB:c.o wrjpgcom.o
-LIB $(LDLIBS)
-<
-
-jconfig.h: jconfig.doc
- echo You must prepare a system-dependent jconfig.h file.
- echo Please read the installation directions in install.doc.
- exit 1
-
-clean:
- -$(RM) *.o cjpeg djpeg jpegtran cjpeg.030 djpeg.030 jpegtran.030
- -$(RM) rdjpgcom wrjpgcom rdjpgcom.030 wrjpgcom.030
- -$(RM) libjpeg.lib core testout*.*
-
-test: cjpeg djpeg jpegtran
- -$(RM) testout*.*
- djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
- djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg
- cjpeg -dct int -outfile testout.jpg testimg.ppm
- djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
- cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
- jpegtran -outfile testoutt.jpg testprog.jpg
- cmp testimg.ppm testout.ppm
- cmp testimg.bmp testout.bmp
- cmp testimg.jpg testout.jpg
- cmp testimg.ppm testoutp.ppm
- cmp testimgp.jpg testoutp.jpg
- cmp testorig.jpg testoutt.jpg
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/libjpegtwrp/makefile.unix b/libjpegtwrp/makefile.unix
deleted file mode 100644
index 00455ab6a..000000000
--- a/libjpegtwrp/makefile.unix
+++ /dev/null
@@ -1,228 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is suitable for Unix-like systems with non-ANSI compilers.
-# If you have an ANSI compiler, makefile.ansi is a better starting point.
-
-# Read installation instructions before saying "make" !!
-
-# The name of your C compiler:
-CC= cc
-
-# You may need to adjust these cc options:
-CFLAGS= -O
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-# However, any special defines for ansi2knr.c may be included here:
-ANSI2KNRFLAGS=
-
-# Link-time cc options:
-LDFLAGS=
-
-# To link any special libraries, add the necessary -l commands here.
-LDLIBS=
-
-# Put here the object file name for the correct system-dependent memory
-# manager file. For Unix this is usually jmemnobs.o, but you may want
-# to use jmemansi.o or jmemname.o if you have limited swap space.
-SYSDEPMEM= jmemnobs.o
-
-# miscellaneous OS-dependent stuff
-# linker
-LN= $(CC)
-# file deletion command
-RM= rm -f
-# file rename command
-MV= mv
-# library (.a) file creation command
-AR= ar rc
-# second step in .a creation (use "touch" if not needed)
-AR2= ranlib
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
- jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
- jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
- jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
- jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
- jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
- jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
- jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
- rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
- rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
- jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
- wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
- coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
- makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
- makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
- maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
- makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
- jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
- jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
- testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
- $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
- jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
- jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
- jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
- jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
- jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
- jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.a
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
- cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
- cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o
-
-
-all: ansi2knr libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-
-# This rule causes ansi2knr to be invoked.
-.c.o:
- ./ansi2knr $*.c T$*.c
- $(CC) $(CFLAGS) -c T$*.c
- $(RM) T$*.c $*.o
- $(MV) T$*.o $*.o
-
-ansi2knr: ansi2knr.c
- $(CC) $(CFLAGS) $(ANSI2KNRFLAGS) -o ansi2knr ansi2knr.c
-
-libjpeg.a: ansi2knr $(LIBOBJECTS)
- $(RM) libjpeg.a
- $(AR) libjpeg.a $(LIBOBJECTS)
- $(AR2) libjpeg.a
-
-cjpeg: ansi2knr $(COBJECTS) libjpeg.a
- $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS)
-
-djpeg: ansi2knr $(DOBJECTS) libjpeg.a
- $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS)
-
-jpegtran: ansi2knr $(TROBJECTS) libjpeg.a
- $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS)
-
-rdjpgcom: rdjpgcom.o
- $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS)
-
-wrjpgcom: wrjpgcom.o
- $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS)
-
-jconfig.h: jconfig.doc
- echo You must prepare a system-dependent jconfig.h file.
- echo Please read the installation directions in install.doc.
- exit 1
-
-clean:
- $(RM) *.o cjpeg djpeg jpegtran libjpeg.a rdjpgcom wrjpgcom
- $(RM) ansi2knr core testout*
-
-test: cjpeg djpeg jpegtran
- $(RM) testout*
- ./djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
- ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg
- ./cjpeg -dct int -outfile testout.jpg testimg.ppm
- ./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
- ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
- ./jpegtran -outfile testoutt.jpg testprog.jpg
- cmp testimg.ppm testout.ppm
- cmp testimg.bmp testout.bmp
- cmp testimg.jpg testout.jpg
- cmp testimg.ppm testoutp.ppm
- cmp testimgp.jpg testoutp.jpg
- cmp testorig.jpg testoutt.jpg
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/libjpegtwrp/makefile.vc b/libjpegtwrp/makefile.vc
deleted file mode 100644
index 2acf06940..000000000
--- a/libjpegtwrp/makefile.vc
+++ /dev/null
@@ -1,211 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for Microsoft Visual C++ on Windows NT (and 95?).
-# It builds the IJG library as a statically linkable library (.LIB),
-# and builds the sample applications as console-mode apps.
-# Thanks to Xingong Chang, Raymond Everly and others.
-
-# Read installation instructions before saying "nmake" !!
-# To build an optimized library without debug info, say "nmake nodebug=1".
-
-# Pull in standard variable definitions
-!include <win32.mak>
-
-# You may want to adjust these compiler options:
-CFLAGS= $(cflags) $(cdebug) $(cvars) -I.
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Link-time options:
-LDFLAGS= $(ldebug) $(conlflags)
-
-# To link any special libraries, add the necessary commands here.
-LDLIBS= $(conlibs)
-
-# Put here the object file name for the correct system-dependent memory
-# manager file. For NT we suggest jmemnobs.obj, which expects the OS to
-# provide adequate virtual memory.
-SYSDEPMEM= jmemnobs.obj
-
-# miscellaneous OS-dependent stuff
-# file deletion command
-RM= del
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
- jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
- jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
- jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
- jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
- jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
- jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
- jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
- rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
- rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
- jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
- wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
- coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
- makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
- makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
- maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
- makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
- jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
- jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
- testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
- $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj \
- jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj \
- jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj \
- jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
-# decompression library object files
-DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj \
- jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj \
- jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj \
- jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj \
- jquant1.obj jquant2.obj jdmerge.obj
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
- rdswitch.obj cdjpeg.obj
-DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
- rdcolmap.obj cdjpeg.obj
-TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
-
-# Template command for compiling .c to .obj
-.c.obj:
- $(cc) $(CFLAGS) $*.c
-
-
-all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
-
-libjpeg.lib: $(LIBOBJECTS)
- $(RM) libjpeg.lib
- lib -out:libjpeg.lib $(LIBOBJECTS)
-
-cjpeg.exe: $(COBJECTS) libjpeg.lib
- $(link) $(LDFLAGS) -out:cjpeg.exe $(COBJECTS) libjpeg.lib $(LDLIBS)
-
-djpeg.exe: $(DOBJECTS) libjpeg.lib
- $(link) $(LDFLAGS) -out:djpeg.exe $(DOBJECTS) libjpeg.lib $(LDLIBS)
-
-jpegtran.exe: $(TROBJECTS) libjpeg.lib
- $(link) $(LDFLAGS) -out:jpegtran.exe $(TROBJECTS) libjpeg.lib $(LDLIBS)
-
-rdjpgcom.exe: rdjpgcom.obj
- $(link) $(LDFLAGS) -out:rdjpgcom.exe rdjpgcom.obj $(LDLIBS)
-
-wrjpgcom.exe: wrjpgcom.obj
- $(link) $(LDFLAGS) -out:wrjpgcom.exe wrjpgcom.obj $(LDLIBS)
-
-
-clean:
- $(RM) *.obj *.exe libjpeg.lib
- $(RM) testout*
-
-test: cjpeg.exe djpeg.exe jpegtran.exe
- $(RM) testout*
- .\djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
- .\djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg
- .\cjpeg -dct int -outfile testout.jpg testimg.ppm
- .\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
- .\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
- .\jpegtran -outfile testoutt.jpg testprog.jpg
- fc /b testimg.ppm testout.ppm
- fc /b testimg.bmp testout.bmp
- fc /b testimg.jpg testout.jpg
- fc /b testimg.ppm testoutp.ppm
- fc /b testimgp.jpg testoutp.jpg
- fc /b testorig.jpg testoutt.jpg
-
-
-jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.obj: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.obj: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.obj: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/libjpegtwrp/makefile.vms b/libjpegtwrp/makefile.vms
deleted file mode 100644
index a42358d05..000000000
--- a/libjpegtwrp/makefile.vms
+++ /dev/null
@@ -1,142 +0,0 @@
-$! Makefile for Independent JPEG Group's software
-$!
-$! This is a command procedure for Digital VMS systems that do not have MMS.
-$! It builds the JPEG software by brute force, recompiling everything whether
-$! or not it is necessary. It then runs the basic self-test.
-$! Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu)
-$! and Tim Bell (tbell@netcom.com) for their help.
-$!
-$! Read installation instructions before running this!!
-$!
-$ If F$Mode () .eqs. "INTERACTIVE"
-$ Then
-$ VERIFY = F$Verify (0)
-$ Else
-$ VERIFY = F$Verify (1)
-$ EndIf
-$ On Control_Y Then GoTo End
-$ On Error Then GoTo End
-$
-$ If F$GetSyi ("HW_MODEL") .gt. 1023
-$ Then
-$ OPT = ""
-$ Else
-$ OPT = ",Sys$Disk:[]makvms.opt/Option"
-$ EndIf
-$
-$ DoCompile := CC /NoDebug /Optimize /NoList
-$!
-$ DoCompile jcapimin.c
-$ DoCompile jcapistd.c
-$ DoCompile jctrans.c
-$ DoCompile jcparam.c
-$ DoCompile jdatadst.c
-$ DoCompile jcinit.c
-$ DoCompile jcmaster.c
-$ DoCompile jcmarker.c
-$ DoCompile jcmainct.c
-$ DoCompile jcprepct.c
-$ DoCompile jccoefct.c
-$ DoCompile jccolor.c
-$ DoCompile jcsample.c
-$ DoCompile jchuff.c
-$ DoCompile jcphuff.c
-$ DoCompile jcdctmgr.c
-$ DoCompile jfdctfst.c
-$ DoCompile jfdctflt.c
-$ DoCompile jfdctint.c
-$ DoCompile jdapimin.c
-$ DoCompile jdapistd.c
-$ DoCompile jdtrans.c
-$ DoCompile jdatasrc.c
-$ DoCompile jdmaster.c
-$ DoCompile jdinput.c
-$ DoCompile jdmarker.c
-$ DoCompile jdhuff.c
-$ DoCompile jdphuff.c
-$ DoCompile jdmainct.c
-$ DoCompile jdcoefct.c
-$ DoCompile jdpostct.c
-$ DoCompile jddctmgr.c
-$ DoCompile jidctfst.c
-$ DoCompile jidctflt.c
-$ DoCompile jidctint.c
-$ DoCompile jidctred.c
-$ DoCompile jdsample.c
-$ DoCompile jdcolor.c
-$ DoCompile jquant1.c
-$ DoCompile jquant2.c
-$ DoCompile jdmerge.c
-$ DoCompile jcomapi.c
-$ DoCompile jutils.c
-$ DoCompile jerror.c
-$ DoCompile jmemmgr.c
-$ DoCompile jmemnobs.c
-$!
-$ Library /Create libjpeg.olb jcapimin.obj,jcapistd.obj,jctrans.obj, -
- jcparam.obj,jdatadst.obj,jcinit.obj,jcmaster.obj,jcmarker.obj, -
- jcmainct.obj,jcprepct.obj,jccoefct.obj,jccolor.obj,jcsample.obj, -
- jchuff.obj,jcphuff.obj,jcdctmgr.obj,jfdctfst.obj,jfdctflt.obj, -
- jfdctint.obj,jdapimin.obj,jdapistd.obj,jdtrans.obj,jdatasrc.obj, -
- jdmaster.obj,jdinput.obj,jdmarker.obj,jdhuff.obj,jdphuff.obj, -
- jdmainct.obj,jdcoefct.obj,jdpostct.obj,jddctmgr.obj,jidctfst.obj, -
- jidctflt.obj,jidctint.obj,jidctred.obj,jdsample.obj,jdcolor.obj, -
- jquant1.obj,jquant2.obj,jdmerge.obj,jcomapi.obj,jutils.obj, -
- jerror.obj,jmemmgr.obj,jmemnobs.obj
-$!
-$ DoCompile cjpeg.c
-$ DoCompile rdppm.c
-$ DoCompile rdgif.c
-$ DoCompile rdtarga.c
-$ DoCompile rdrle.c
-$ DoCompile rdbmp.c
-$ DoCompile rdswitch.c
-$ DoCompile cdjpeg.c
-$!
-$ Link /NoMap /Executable = cjpeg.exe cjpeg.obj,rdppm.obj,rdgif.obj, -
- rdtarga.obj,rdrle.obj,rdbmp.obj,rdswitch.obj,cdjpeg.obj,libjpeg.olb/Library'OPT'
-$!
-$ DoCompile djpeg.c
-$ DoCompile wrppm.c
-$ DoCompile wrgif.c
-$ DoCompile wrtarga.c
-$ DoCompile wrrle.c
-$ DoCompile wrbmp.c
-$ DoCompile rdcolmap.c
-$ DoCompile cdjpeg.c
-$!
-$ Link /NoMap /Executable = djpeg.exe djpeg.obj,wrppm.obj,wrgif.obj, -
- wrtarga.obj,wrrle.obj,wrbmp.obj,rdcolmap.obj,cdjpeg.obj,libjpeg.olb/Library'OPT'
-$!
-$ DoCompile jpegtran.c
-$ DoCompile rdswitch.c
-$ DoCompile cdjpeg.c
-$ DoCompile transupp.c
-$!
-$ Link /NoMap /Executable = jpegtran.exe jpegtran.obj,rdswitch.obj, -
- cdjpeg.obj,transupp.obj,libjpeg.olb/Library'OPT'
-$!
-$ DoCompile rdjpgcom.c
-$ Link /NoMap /Executable = rdjpgcom.exe rdjpgcom.obj'OPT'
-$!
-$ DoCompile wrjpgcom.c
-$ Link /NoMap /Executable = wrjpgcom.exe wrjpgcom.obj'OPT'
-$!
-$! Run the self-test
-$!
-$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
-$ mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg
-$ mcr sys$disk:[]cjpeg -dct int -outfile testout.jpg testimg.ppm
-$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-$ mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-$ mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg
-$ Backup /Compare/Log testimg.ppm testout.ppm
-$ Backup /Compare/Log testimg.bmp testout.bmp
-$ Backup /Compare/Log testimg.jpg testout.jpg
-$ Backup /Compare/Log testimg.ppm testoutp.ppm
-$ Backup /Compare/Log testimgp.jpg testoutp.jpg
-$ Backup /Compare/Log testorig.jpg testoutt.jpg
-$!
-$End:
-$ If Verify Then Set Verify
-$ Exit
diff --git a/libjpegtwrp/makefile.wat b/libjpegtwrp/makefile.wat
deleted file mode 100644
index d953e466f..000000000
--- a/libjpegtwrp/makefile.wat
+++ /dev/null
@@ -1,233 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is suitable for Watcom C/C++ 10.0 on MS-DOS (using
-# dos4g extender), OS/2, and Windows NT console mode.
-# Thanks to Janos Haide, jhaide@btrvtech.com.
-
-# Read installation instructions before saying "wmake" !!
-
-# Uncomment line for desired system
-SYSTEM=DOS
-#SYSTEM=OS2
-#SYSTEM=NT
-
-# The name of your C compiler:
-CC= wcl386
-
-# You may need to adjust these cc options:
-CFLAGS= -4r -ort -wx -zq -bt=$(SYSTEM)
-# Caution: avoid -ol or -ox; these generate bad code with 10.0 or 10.0a.
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Link-time cc options:
-!ifeq SYSTEM DOS
-LDFLAGS= -zq -l=dos4g
-!else ifeq SYSTEM OS2
-LDFLAGS= -zq -l=os2v2
-!else ifeq SYSTEM NT
-LDFLAGS= -zq -l=nt
-!endif
-
-# Put here the object file name for the correct system-dependent memory
-# manager file. jmemnobs should work fine for dos4g or OS/2 environment.
-SYSDEPMEM= jmemnobs.obj
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c &
- jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c &
- jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c &
- jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c &
- jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c &
- jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c &
- jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c &
- jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c &
- rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c &
- rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h &
- jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 &
- wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc &
- coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc &
- makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds &
- makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st &
- maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms &
- makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat &
- jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas &
- jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg &
- testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) &
- $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj &
- jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj &
- jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj &
- jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
-# decompression library object files
-DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj &
- jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj &
- jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj &
- jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj &
- jquant1.obj jquant2.obj jdmerge.obj
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj &
- rdswitch.obj cdjpeg.obj
-DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj &
- rdcolmap.obj cdjpeg.obj
-TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
-
-
-all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
-
-libjpeg.lib: $(LIBOBJECTS)
- - del libjpeg.lib
- * wlib -n libjpeg.lib $(LIBOBJECTS)
-
-cjpeg.exe: $(COBJECTS) libjpeg.lib
- $(CC) $(LDFLAGS) $(COBJECTS) libjpeg.lib
-
-djpeg.exe: $(DOBJECTS) libjpeg.lib
- $(CC) $(LDFLAGS) $(DOBJECTS) libjpeg.lib
-
-jpegtran.exe: $(TROBJECTS) libjpeg.lib
- $(CC) $(LDFLAGS) $(TROBJECTS) libjpeg.lib
-
-rdjpgcom.exe: rdjpgcom.c
- $(CC) $(CFLAGS) $(LDFLAGS) rdjpgcom.c
-
-wrjpgcom.exe: wrjpgcom.c
- $(CC) $(CFLAGS) $(LDFLAGS) wrjpgcom.c
-
-.c.obj:
- $(CC) $(CFLAGS) -c $<
-
-jconfig.h: jconfig.doc
- echo You must prepare a system-dependent jconfig.h file.
- echo Please read the installation directions in install.doc.
- exit 1
-
-clean: .SYMBOLIC
- - del *.obj
- - del libjpeg.lib
- - del cjpeg.exe
- - del djpeg.exe
- - del jpegtran.exe
- - del rdjpgcom.exe
- - del wrjpgcom.exe
- - del testout*.*
-
-test: cjpeg.exe djpeg.exe jpegtran.exe .SYMBOLIC
- - del testout*.*
- djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
- djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg
- cjpeg -dct int -outfile testout.jpg testimg.ppm
- djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
- cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
- jpegtran -outfile testoutt.jpg testprog.jpg
-!ifeq SYSTEM DOS
- fc /b testimg.ppm testout.ppm
- fc /b testimg.bmp testout.bmp
- fc /b testimg.jpg testout.jpg
- fc /b testimg.ppm testoutp.ppm
- fc /b testimgp.jpg testoutp.jpg
- fc /b testorig.jpg testoutt.jpg
-!else
- echo n > n.tmp
- comp testimg.ppm testout.ppm < n.tmp
- comp testimg.bmp testout.bmp < n.tmp
- comp testimg.jpg testout.jpg < n.tmp
- comp testimg.ppm testoutp.ppm < n.tmp
- comp testimgp.jpg testoutp.jpg < n.tmp
- comp testorig.jpg testoutt.jpg < n.tmp
- del n.tmp
-!endif
-
-
-jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.obj: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.obj: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.obj: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/libjpegtwrp/makelib.ds b/libjpegtwrp/makelib.ds
deleted file mode 100644
index c7ad36d09..000000000
--- a/libjpegtwrp/makelib.ds
+++ /dev/null
@@ -1,1046 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Format Version 4.20
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Static Library" 0x0104
-
-!IF "$(CFG)" == ""
-CFG=jpeg - Win32
-!MESSAGE No configuration specified. Defaulting to jpeg - Win32.
-!ENDIF
-
-!IF "$(CFG)" != "jpeg - Win32"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE on this makefile
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE
-!MESSAGE NMAKE /f "jpeg.mak" CFG="jpeg - Win32"
-!MESSAGE
-!MESSAGE Possible choices for configuration are:
-!MESSAGE
-!MESSAGE "jpeg - Win32" (based on "Win32 (x86) Static Library")
-!MESSAGE
-!ERROR An invalid configuration is specified.
-!ENDIF
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE
-NULL=nul
-!ENDIF
-################################################################################
-# Begin Project
-# PROP Target_Last_Scanned "jpeg - Win32"
-CPP=cl.exe
-
-!IF "$(CFG)" == "jpeg - Win32"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Target_Dir ""
-OUTDIR=.\Release
-INTDIR=.\Release
-
-ALL : "$(OUTDIR)\jpeg.lib"
-
-CLEAN :
- -@erase "$(INTDIR)\jcapimin.obj"
- -@erase "$(INTDIR)\jcapistd.obj"
- -@erase "$(INTDIR)\jctrans.obj"
- -@erase "$(INTDIR)\jcparam.obj"
- -@erase "$(INTDIR)\jdatadst.obj"
- -@erase "$(INTDIR)\jcinit.obj"
- -@erase "$(INTDIR)\jcmaster.obj"
- -@erase "$(INTDIR)\jcmarker.obj"
- -@erase "$(INTDIR)\jcmainct.obj"
- -@erase "$(INTDIR)\jcprepct.obj"
- -@erase "$(INTDIR)\jccoefct.obj"
- -@erase "$(INTDIR)\jccolor.obj"
- -@erase "$(INTDIR)\jcsample.obj"
- -@erase "$(INTDIR)\jchuff.obj"
- -@erase "$(INTDIR)\jcphuff.obj"
- -@erase "$(INTDIR)\jcdctmgr.obj"
- -@erase "$(INTDIR)\jfdctfst.obj"
- -@erase "$(INTDIR)\jfdctflt.obj"
- -@erase "$(INTDIR)\jfdctint.obj"
- -@erase "$(INTDIR)\jdapimin.obj"
- -@erase "$(INTDIR)\jdapistd.obj"
- -@erase "$(INTDIR)\jdtrans.obj"
- -@erase "$(INTDIR)\jdatasrc.obj"
- -@erase "$(INTDIR)\jdmaster.obj"
- -@erase "$(INTDIR)\jdinput.obj"
- -@erase "$(INTDIR)\jdmarker.obj"
- -@erase "$(INTDIR)\jdhuff.obj"
- -@erase "$(INTDIR)\jdphuff.obj"
- -@erase "$(INTDIR)\jdmainct.obj"
- -@erase "$(INTDIR)\jdcoefct.obj"
- -@erase "$(INTDIR)\jdpostct.obj"
- -@erase "$(INTDIR)\jddctmgr.obj"
- -@erase "$(INTDIR)\jidctfst.obj"
- -@erase "$(INTDIR)\jidctflt.obj"
- -@erase "$(INTDIR)\jidctint.obj"
- -@erase "$(INTDIR)\jidctred.obj"
- -@erase "$(INTDIR)\jdsample.obj"
- -@erase "$(INTDIR)\jdcolor.obj"
- -@erase "$(INTDIR)\jquant1.obj"
- -@erase "$(INTDIR)\jquant2.obj"
- -@erase "$(INTDIR)\jdmerge.obj"
- -@erase "$(INTDIR)\jcomapi.obj"
- -@erase "$(INTDIR)\jutils.obj"
- -@erase "$(INTDIR)\jerror.obj"
- -@erase "$(INTDIR)\jmemmgr.obj"
- -@erase "$(INTDIR)\jmemnobs.obj"
- -@erase "$(OUTDIR)\jpeg.lib"
-
-"$(OUTDIR)" :
- if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
-CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS"\
- /Fp"$(INTDIR)/jpeg.pch" /YX /Fo"$(INTDIR)/" /c
-CPP_OBJS=.\Release/
-CPP_SBRS=.\.
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-BSC32_FLAGS=/nologo /o"$(OUTDIR)/jpeg.bsc"
-BSC32_SBRS= \
-
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo
-LIB32_FLAGS=/nologo /out:"$(OUTDIR)/jpeg.lib"
-LIB32_OBJS= \
- "$(INTDIR)\jcapimin.obj" \
- "$(INTDIR)\jcapistd.obj" \
- "$(INTDIR)\jctrans.obj" \
- "$(INTDIR)\jcparam.obj" \
- "$(INTDIR)\jdatadst.obj" \
- "$(INTDIR)\jcinit.obj" \
- "$(INTDIR)\jcmaster.obj" \
- "$(INTDIR)\jcmarker.obj" \
- "$(INTDIR)\jcmainct.obj" \
- "$(INTDIR)\jcprepct.obj" \
- "$(INTDIR)\jccoefct.obj" \
- "$(INTDIR)\jccolor.obj" \
- "$(INTDIR)\jcsample.obj" \
- "$(INTDIR)\jchuff.obj" \
- "$(INTDIR)\jcphuff.obj" \
- "$(INTDIR)\jcdctmgr.obj" \
- "$(INTDIR)\jfdctfst.obj" \
- "$(INTDIR)\jfdctflt.obj" \
- "$(INTDIR)\jfdctint.obj" \
- "$(INTDIR)\jdapimin.obj" \
- "$(INTDIR)\jdapistd.obj" \
- "$(INTDIR)\jdtrans.obj" \
- "$(INTDIR)\jdatasrc.obj" \
- "$(INTDIR)\jdmaster.obj" \
- "$(INTDIR)\jdinput.obj" \
- "$(INTDIR)\jdmarker.obj" \
- "$(INTDIR)\jdhuff.obj" \
- "$(INTDIR)\jdphuff.obj" \
- "$(INTDIR)\jdmainct.obj" \
- "$(INTDIR)\jdcoefct.obj" \
- "$(INTDIR)\jdpostct.obj" \
- "$(INTDIR)\jddctmgr.obj" \
- "$(INTDIR)\jidctfst.obj" \
- "$(INTDIR)\jidctflt.obj" \
- "$(INTDIR)\jidctint.obj" \
- "$(INTDIR)\jidctred.obj" \
- "$(INTDIR)\jdsample.obj" \
- "$(INTDIR)\jdcolor.obj" \
- "$(INTDIR)\jquant1.obj" \
- "$(INTDIR)\jquant2.obj" \
- "$(INTDIR)\jdmerge.obj" \
- "$(INTDIR)\jcomapi.obj" \
- "$(INTDIR)\jutils.obj" \
- "$(INTDIR)\jerror.obj" \
- "$(INTDIR)\jmemmgr.obj" \
- "$(INTDIR)\jmemnobs.obj"
-
-"$(OUTDIR)\jpeg.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS)
- $(LIB32) @<<
- $(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS)
-<<
-
-!ENDIF
-
-.c{$(CPP_OBJS)}.obj:
- $(CPP) $(CPP_PROJ) $<
-
-.cpp{$(CPP_OBJS)}.obj:
- $(CPP) $(CPP_PROJ) $<
-
-.cxx{$(CPP_OBJS)}.obj:
- $(CPP) $(CPP_PROJ) $<
-
-.c{$(CPP_SBRS)}.sbr:
- $(CPP) $(CPP_PROJ) $<
-
-.cpp{$(CPP_SBRS)}.sbr:
- $(CPP) $(CPP_PROJ) $<
-
-.cxx{$(CPP_SBRS)}.sbr:
- $(CPP) $(CPP_PROJ) $<
-
-################################################################################
-# Begin Target
-
-# Name "jpeg - Win32"
-
-!IF "$(CFG)" == "jpeg - Win32"
-
-!ENDIF
-
-################################################################################
-# Begin Source File
-
-SOURCE="jcapimin.c"
-DEP_CPP_JCAPI=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jcapimin.obj" : $(SOURCE) $(DEP_CPP_JCAPI) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcapistd.c"
-DEP_CPP_JCAPIS=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jcapistd.obj" : $(SOURCE) $(DEP_CPP_JCAPIS) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jccoefct.c"
-DEP_CPP_JCCOE=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jccoefct.obj" : $(SOURCE) $(DEP_CPP_JCCOE) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jccolor.c"
-DEP_CPP_JCCOL=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jccolor.obj" : $(SOURCE) $(DEP_CPP_JCCOL) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcdctmgr.c"
-DEP_CPP_JCDCT=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "jdct.h"\
-
-
-"$(INTDIR)\jcdctmgr.obj" : $(SOURCE) $(DEP_CPP_JCDCT) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jchuff.c"
-DEP_CPP_JCHUF=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "jchuff.h"\
-
-
-"$(INTDIR)\jchuff.obj" : $(SOURCE) $(DEP_CPP_JCHUF) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcinit.c"
-DEP_CPP_JCINI=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jcinit.obj" : $(SOURCE) $(DEP_CPP_JCINI) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcmainct.c"
-DEP_CPP_JCMAI=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jcmainct.obj" : $(SOURCE) $(DEP_CPP_JCMAI) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcmarker.c"
-DEP_CPP_JCMAR=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jcmarker.obj" : $(SOURCE) $(DEP_CPP_JCMAR) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcmaster.c"
-DEP_CPP_JCMAS=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jcmaster.obj" : $(SOURCE) $(DEP_CPP_JCMAS) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcomapi.c"
-DEP_CPP_JCOMA=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jcomapi.obj" : $(SOURCE) $(DEP_CPP_JCOMA) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcparam.c"
-DEP_CPP_JCPAR=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jcparam.obj" : $(SOURCE) $(DEP_CPP_JCPAR) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcphuff.c"
-DEP_CPP_JCPHU=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "jchuff.h"\
-
-
-"$(INTDIR)\jcphuff.obj" : $(SOURCE) $(DEP_CPP_JCPHU) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcprepct.c"
-DEP_CPP_JCPRE=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jcprepct.obj" : $(SOURCE) $(DEP_CPP_JCPRE) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcsample.c"
-DEP_CPP_JCSAM=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jcsample.obj" : $(SOURCE) $(DEP_CPP_JCSAM) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jctrans.c"
-DEP_CPP_JCTRA=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jctrans.obj" : $(SOURCE) $(DEP_CPP_JCTRA) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdapimin.c"
-DEP_CPP_JDAPI=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jdapimin.obj" : $(SOURCE) $(DEP_CPP_JDAPI) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdapistd.c"
-DEP_CPP_JDAPIS=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jdapistd.obj" : $(SOURCE) $(DEP_CPP_JDAPIS) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdatadst.c"
-DEP_CPP_JDATA=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jdatadst.obj" : $(SOURCE) $(DEP_CPP_JDATA) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdatasrc.c"
-DEP_CPP_JDATAS=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jdatasrc.obj" : $(SOURCE) $(DEP_CPP_JDATAS) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdcoefct.c"
-DEP_CPP_JDCOE=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jdcoefct.obj" : $(SOURCE) $(DEP_CPP_JDCOE) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdcolor.c"
-DEP_CPP_JDCOL=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jdcolor.obj" : $(SOURCE) $(DEP_CPP_JDCOL) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jddctmgr.c"
-DEP_CPP_JDDCT=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "jdct.h"\
-
-
-"$(INTDIR)\jddctmgr.obj" : $(SOURCE) $(DEP_CPP_JDDCT) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdhuff.c"
-DEP_CPP_JDHUF=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "jdhuff.h"\
-
-
-"$(INTDIR)\jdhuff.obj" : $(SOURCE) $(DEP_CPP_JDHUF) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdinput.c"
-DEP_CPP_JDINP=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jdinput.obj" : $(SOURCE) $(DEP_CPP_JDINP) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdmainct.c"
-DEP_CPP_JDMAI=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jdmainct.obj" : $(SOURCE) $(DEP_CPP_JDMAI) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdmarker.c"
-DEP_CPP_JDMAR=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jdmarker.obj" : $(SOURCE) $(DEP_CPP_JDMAR) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdmaster.c"
-DEP_CPP_JDMAS=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jdmaster.obj" : $(SOURCE) $(DEP_CPP_JDMAS) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdmerge.c"
-DEP_CPP_JDMER=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jdmerge.obj" : $(SOURCE) $(DEP_CPP_JDMER) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdphuff.c"
-DEP_CPP_JDPHU=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "jdhuff.h"\
-
-
-"$(INTDIR)\jdphuff.obj" : $(SOURCE) $(DEP_CPP_JDPHU) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdpostct.c"
-DEP_CPP_JDPOS=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jdpostct.obj" : $(SOURCE) $(DEP_CPP_JDPOS) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdsample.c"
-DEP_CPP_JDSAM=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jdsample.obj" : $(SOURCE) $(DEP_CPP_JDSAM) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdtrans.c"
-DEP_CPP_JDTRA=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jdtrans.obj" : $(SOURCE) $(DEP_CPP_JDTRA) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jerror.c"
-DEP_CPP_JERRO=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jversion.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jerror.obj" : $(SOURCE) $(DEP_CPP_JERRO) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jfdctflt.c"
-DEP_CPP_JFDCT=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "jdct.h"\
-
-
-"$(INTDIR)\jfdctflt.obj" : $(SOURCE) $(DEP_CPP_JFDCT) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jfdctfst.c"
-DEP_CPP_JFDCTF=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "jdct.h"\
-
-
-"$(INTDIR)\jfdctfst.obj" : $(SOURCE) $(DEP_CPP_JFDCTF) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jfdctint.c"
-DEP_CPP_JFDCTI=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "jdct.h"\
-
-
-"$(INTDIR)\jfdctint.obj" : $(SOURCE) $(DEP_CPP_JFDCTI) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jidctflt.c"
-DEP_CPP_JIDCT=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "jdct.h"\
-
-
-"$(INTDIR)\jidctflt.obj" : $(SOURCE) $(DEP_CPP_JIDCT) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jidctfst.c"
-DEP_CPP_JIDCTF=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "jdct.h"\
-
-
-"$(INTDIR)\jidctfst.obj" : $(SOURCE) $(DEP_CPP_JIDCTF) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jidctint.c"
-DEP_CPP_JIDCTI=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "jdct.h"\
-
-
-"$(INTDIR)\jidctint.obj" : $(SOURCE) $(DEP_CPP_JIDCTI) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jidctred.c"
-DEP_CPP_JIDCTR=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "jdct.h"\
-
-
-"$(INTDIR)\jidctred.obj" : $(SOURCE) $(DEP_CPP_JIDCTR) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jquant1.c"
-DEP_CPP_JQUAN=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jquant1.obj" : $(SOURCE) $(DEP_CPP_JQUAN) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jquant2.c"
-DEP_CPP_JQUANT=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jquant2.obj" : $(SOURCE) $(DEP_CPP_JQUANT) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jutils.c"
-DEP_CPP_JUTIL=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
-
-
-"$(INTDIR)\jutils.obj" : $(SOURCE) $(DEP_CPP_JUTIL) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jmemmgr.c"
-DEP_CPP_JMEMM=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "jmemsys.h"\
-
-
-"$(INTDIR)\jmemmgr.obj" : $(SOURCE) $(DEP_CPP_JMEMM) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jmemnobs.c"
-DEP_CPP_JMEMN=\
- "jinclude.h"\
- "jconfig.h"\
- "jpeglib.h"\
- "jmorecfg.h"\
- "jpegint.h"\
- "jerror.h"\
- "jmemsys.h"\
-
-
-"$(INTDIR)\jmemnobs.obj" : $(SOURCE) $(DEP_CPP_JMEMN) "$(INTDIR)"
- $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-# End Target
-# End Project
-################################################################################
-
diff --git a/libjpegtwrp/makeproj.mac b/libjpegtwrp/makeproj.mac
deleted file mode 100644
index ed277c83d..000000000
--- a/libjpegtwrp/makeproj.mac
+++ /dev/null
@@ -1,213 +0,0 @@
---
--- makeproj.mac
---
--- This AppleScript builds Code Warrior PRO Release 2 project files for the
--- libjpeg library as well as the test programs 'cjpeg', 'djpeg', 'jpegtran'.
--- (We'd distribute real project files, except they're not text
--- and would create maintenance headaches.)
---
--- The script then compiles and links the library and the test programs.
--- NOTE: if you haven't already created a 'jconfig.h' file, the script
--- automatically copies 'jconfig.mac' to 'jconfig.h'.
---
--- To use this script, you must have AppleScript 1.1 or later installed
--- and a suitable AppleScript editor like Script Editor or Script Debugger
--- (http://www.latenightsw.com). Open this file with your AppleScript
--- editor and execute the "run" command to build the projects.
---
--- Thanks to Dan Sears and Don Agro for this script.
--- Questions about this script can be addressed to dogpark@interlog.com
---
-
-on run
-
- choose folder with prompt ">>> Select IJG source folder <<<"
- set ijg_folder to result
-
- choose folder with prompt ">>> Select MetroWerks folder <<<"
- set cw_folder to result
-
- -- if jconfig.h doesn't already exist, copy jconfig.mac
-
- tell application "Finder"
- if not (exists file "jconfig.h" of ijg_folder) then
- duplicate {file "jconfig.mac" of folder ijg_folder}
- select file "jconfig.mac copy" of folder ijg_folder
- set name of selection to "jconfig.h"
- end if
- end tell
-
- tell application "CodeWarrior IDE 2.1"
- with timeout of 10000 seconds
-
- -- create libjpeg project
-
- activate
- Create Project (ijg_folder as string) & "libjpeg.proj"
- Set Preferences of panel "Target Settings" to {Target Name:"libjpeg"}
- Set Preferences of panel "PPC Project" to {File Name:"libjpeg"}
- Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"}
- Set Preferences of panel "PPC Project" to {Project Type:library}
- Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true}
- Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true}
- Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC}
- Set Preferences of panel "PPC Linker" to {Generate SYM File:false}
-
- Add Files (ijg_folder as string) & "jcapimin.c" To Segment 1
- Add Files (ijg_folder as string) & "jcapistd.c" To Segment 1
- Add Files (ijg_folder as string) & "jctrans.c" To Segment 1
- Add Files (ijg_folder as string) & "jcparam.c" To Segment 1
- Add Files (ijg_folder as string) & "jdatadst.c" To Segment 1
- Add Files (ijg_folder as string) & "jcinit.c" To Segment 1
- Add Files (ijg_folder as string) & "jcmaster.c" To Segment 1
- Add Files (ijg_folder as string) & "jcmarker.c" To Segment 1
- Add Files (ijg_folder as string) & "jcmainct.c" To Segment 1
- Add Files (ijg_folder as string) & "jcprepct.c" To Segment 1
- Add Files (ijg_folder as string) & "jccoefct.c" To Segment 1
- Add Files (ijg_folder as string) & "jccolor.c" To Segment 1
- Add Files (ijg_folder as string) & "jcsample.c" To Segment 1
- Add Files (ijg_folder as string) & "jchuff.c" To Segment 1
- Add Files (ijg_folder as string) & "jcphuff.c" To Segment 1
- Add Files (ijg_folder as string) & "jcdctmgr.c" To Segment 1
- Add Files (ijg_folder as string) & "jfdctfst.c" To Segment 1
- Add Files (ijg_folder as string) & "jfdctflt.c" To Segment 1
- Add Files (ijg_folder as string) & "jfdctint.c" To Segment 1
- Add Files (ijg_folder as string) & "jdapimin.c" To Segment 1
- Add Files (ijg_folder as string) & "jdapistd.c" To Segment 1
- Add Files (ijg_folder as string) & "jdtrans.c" To Segment 1
- Add Files (ijg_folder as string) & "jdatasrc.c" To Segment 1
- Add Files (ijg_folder as string) & "jdmaster.c" To Segment 1
- Add Files (ijg_folder as string) & "jdinput.c" To Segment 1
- Add Files (ijg_folder as string) & "jdmarker.c" To Segment 1
- Add Files (ijg_folder as string) & "jdhuff.c" To Segment 1
- Add Files (ijg_folder as string) & "jdphuff.c" To Segment 1
- Add Files (ijg_folder as string) & "jdmainct.c" To Segment 1
- Add Files (ijg_folder as string) & "jdcoefct.c" To Segment 1
- Add Files (ijg_folder as string) & "jdpostct.c" To Segment 1
- Add Files (ijg_folder as string) & "jddctmgr.c" To Segment 1
- Add Files (ijg_folder as string) & "jidctfst.c" To Segment 1
- Add Files (ijg_folder as string) & "jidctflt.c" To Segment 1
- Add Files (ijg_folder as string) & "jidctint.c" To Segment 1
- Add Files (ijg_folder as string) & "jidctred.c" To Segment 1
- Add Files (ijg_folder as string) & "jdsample.c" To Segment 1
- Add Files (ijg_folder as string) & "jdcolor.c" To Segment 1
- Add Files (ijg_folder as string) & "jquant1.c" To Segment 1
- Add Files (ijg_folder as string) & "jquant2.c" To Segment 1
- Add Files (ijg_folder as string) & "jdmerge.c" To Segment 1
- Add Files (ijg_folder as string) & "jcomapi.c" To Segment 1
- Add Files (ijg_folder as string) & "jutils.c" To Segment 1
- Add Files (ijg_folder as string) & "jerror.c" To Segment 1
- Add Files (ijg_folder as string) & "jmemmgr.c" To Segment 1
- Add Files (ijg_folder as string) & "jmemmac.c" To Segment 1
-
- -- compile and link the library
-
- Make Project
- Close Project
-
- -- create cjpeg project
-
- activate
- Create Project (ijg_folder as string) & "cjpeg.proj"
- Set Preferences of panel "Target Settings" to {Target Name:"cjpeg"}
- Set Preferences of panel "PPC Project" to {File Name:"cjpeg"}
- Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"}
- Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true}
- Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true}
- Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC}
- Set Preferences of panel "PPC Linker" to {Generate SYM File:false}
-
- Add Files (ijg_folder as string) & "cjpeg.c" To Segment 1
- Add Files (ijg_folder as string) & "rdppm.c" To Segment 1
- Add Files (ijg_folder as string) & "rdgif.c" To Segment 1
- Add Files (ijg_folder as string) & "rdtarga.c" To Segment 1
- Add Files (ijg_folder as string) & "rdrle.c" To Segment 1
- Add Files (ijg_folder as string) & "rdbmp.c" To Segment 1
- Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1
- Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1
-
- Add Files (ijg_folder as string) & "libjpeg" To Segment 2
-
- Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3
- Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3
- Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3
-
- Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4
- Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4
-
- -- compile and link cjpeg
-
- Make Project
- Close Project
-
- -- create djpeg project
-
- activate
- Create Project (ijg_folder as string) & "djpeg.proj"
- Set Preferences of panel "Target Settings" to {Target Name:"djpeg"}
- Set Preferences of panel "PPC Project" to {File Name:"djpeg"}
- Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"}
- Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true}
- Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true}
- Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC}
- Set Preferences of panel "PPC Linker" to {Generate SYM File:false}
-
- Add Files (ijg_folder as string) & "djpeg.c" To Segment 1
- Add Files (ijg_folder as string) & "wrppm.c" To Segment 1
- Add Files (ijg_folder as string) & "wrgif.c" To Segment 1
- Add Files (ijg_folder as string) & "wrtarga.c" To Segment 1
- Add Files (ijg_folder as string) & "wrrle.c" To Segment 1
- Add Files (ijg_folder as string) & "wrbmp.c" To Segment 1
- Add Files (ijg_folder as string) & "rdcolmap.c" To Segment 1
- Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1
-
- Add Files (ijg_folder as string) & "libjpeg" To Segment 2
-
- Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3
- Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3
- Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3
-
- Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4
- Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4
-
- -- compile and link djpeg
-
- Make Project
- Close Project
-
- -- create jpegtran project
-
- activate
- Create Project (ijg_folder as string) & "jpegtran.proj"
- Set Preferences of panel "Target Settings" to {Target Name:"jpegtran"}
- Set Preferences of panel "PPC Project" to {File Name:"jpegtran"}
- Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"}
- Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true}
- Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true}
- Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC}
- Set Preferences of panel "PPC Linker" to {Generate SYM File:false}
-
- Add Files (ijg_folder as string) & "jpegtran.c" To Segment 1
- Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1
- Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1
- Add Files (ijg_folder as string) & "transupp.c" To Segment 1
-
- Add Files (ijg_folder as string) & "libjpeg" To Segment 2
-
- Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3
- Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3
- Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3
-
- Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4
- Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4
-
- -- compile and link jpegtran
-
- Make Project
- Close Project
-
- quit
-
- end timeout
- end tell
-end run
diff --git a/libjpegtwrp/makljpeg.st b/libjpegtwrp/makljpeg.st
deleted file mode 100644
index 813493ea8..000000000
--- a/libjpegtwrp/makljpeg.st
+++ /dev/null
@@ -1,70 +0,0 @@
-; Project file for Independent JPEG Group's software
-;
-; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
-; Thanks to Frank Moehle (Frank.Moehle@arbi.informatik.uni-oldenburg.de),
-; Dr. B. Setzepfandt (bernd@gina.uni-muenster.de),
-; and Guido Vollbeding (guivol@esc.de).
-;
-; To use this file, rename it to libjpeg.prj.
-; Read installation instructions before trying to make the program!
-;
-;
-; * * * Output file * * *
-libjpeg.lib
-;
-; * * * COMPILER OPTIONS * * *
-.C[-P] ; absolute calls
-.C[-M] ; and no string merging, folks
-.C[-w-cln] ; no "constant is long" warnings
-.C[-w-par] ; no "parameter xxxx unused"
-.C[-w-rch] ; no "unreachable code"
-.C[-wsig] ; warn if significant digits may be lost
-.L[-J] ; link new Obj-format (so we get a library)
-=
-; * * * * List of modules * * * *
-jcapimin.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcapistd.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jccoefct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jccolor.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcdctmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jchuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jchuff.h)
-jcinit.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcmainct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcmarker.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcmaster.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcomapi.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcparam.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcphuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jchuff.h)
-jcprepct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcsample.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jctrans.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdapimin.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdapistd.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdatadst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h)
-jdatasrc.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h)
-jdcoefct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdcolor.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jddctmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jdhuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdhuff.h)
-jdinput.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdmainct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdmarker.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdmaster.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdmerge.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdphuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdhuff.h)
-jdpostct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdsample.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdtrans.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jerror.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jversion.h,jerror.h)
-jfdctflt.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jfdctfst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jfdctint.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jidctflt.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jidctfst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jidctint.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jidctred.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jquant1.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jquant2.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jutils.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jmemmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h)
-jmemansi.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h)
diff --git a/libjpegtwrp/maktjpeg.st b/libjpegtwrp/maktjpeg.st
deleted file mode 100644
index 31f4d169c..000000000
--- a/libjpegtwrp/maktjpeg.st
+++ /dev/null
@@ -1,32 +0,0 @@
-; Project file for Independent JPEG Group's software
-;
-; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
-; Thanks to Frank Moehle (Frank.Moehle@arbi.informatik.uni-oldenburg.de),
-; Dr. B. Setzepfandt (bernd@gina.uni-muenster.de),
-; and Guido Vollbeding (guivol@esc.de).
-;
-; To use this file, rename it to jpegtran.prj.
-; If you are using Turbo C, change filenames beginning with "pc..." to "tc..."
-; Read installation instructions before trying to make the program!
-;
-;
-; * * * Output file * * *
-jpegtran.ttp
-;
-; * * * COMPILER OPTIONS * * *
-.C[-P] ; absolute calls
-.C[-M] ; and no string merging, folks
-.C[-w-cln] ; no "constant is long" warnings
-.C[-w-par] ; no "parameter xxxx unused"
-.C[-w-rch] ; no "unreachable code"
-.C[-wsig] ; warn if significant digits may be lost
-=
-; * * * * List of modules * * * *
-pcstart.o
-jpegtran.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,transupp.h,jversion.h)
-cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdswitch.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-transupp.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,transupp.h)
-libjpeg.lib ; built by libjpeg.prj
-pcstdlib.lib ; standard library
-pcextlib.lib ; extended library
diff --git a/libjpegtwrp/makvms.opt b/libjpegtwrp/makvms.opt
deleted file mode 100644
index 675e8fe98..000000000
--- a/libjpegtwrp/makvms.opt
+++ /dev/null
@@ -1,4 +0,0 @@
-! A pointer to the VAX/VMS C Run-Time Shareable Library.
-! This file is needed by makefile.mms and makefile.vms,
-! but only for the older VAX C compiler. DEC C does not need it.
-Sys$Library:VAXCRTL.EXE /Share
diff --git a/libjpegtwrp/rdbmp.c b/libjpegtwrp/rdbmp.c
deleted file mode 100644
index b05fe2ac4..000000000
--- a/libjpegtwrp/rdbmp.c
+++ /dev/null
@@ -1,439 +0,0 @@
-/*
- * rdbmp.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to read input images in Microsoft "BMP"
- * format (MS Windows 3.x, OS/2 1.x, and OS/2 2.x flavors).
- * Currently, only 8-bit and 24-bit images are supported, not 1-bit or
- * 4-bit (feeding such low-depth images into JPEG would be silly anyway).
- * Also, we don't support RLE-compressed files.
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications. As they stand, they assume input from
- * an ordinary stdio stream. They further assume that reading begins
- * at the start of the file; start_input may need work if the
- * user interface has already read some data (e.g., to determine that
- * the file is indeed BMP format).
- *
- * This code contributed by James Arthur Boucher.
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-
-#ifdef BMP_SUPPORTED
-
-
-/* Macros to deal with unsigned chars as efficiently as compiler allows */
-
-#ifdef HAVE_UNSIGNED_CHAR
-typedef unsigned char U_CHAR;
-#define UCH(x) ((int) (x))
-#else /* !HAVE_UNSIGNED_CHAR */
-#ifdef CHAR_IS_UNSIGNED
-typedef char U_CHAR;
-#define UCH(x) ((int) (x))
-#else
-typedef char U_CHAR;
-#define UCH(x) ((int) (x) & 0xFF)
-#endif
-#endif /* HAVE_UNSIGNED_CHAR */
-
-
-#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len)))
-
-
-/* Private version of data source object */
-
-typedef struct _bmp_source_struct * bmp_source_ptr;
-
-typedef struct _bmp_source_struct {
- struct cjpeg_source_struct pub; /* public fields */
-
- j_compress_ptr cinfo; /* back link saves passing separate parm */
-
- JSAMPARRAY colormap; /* BMP colormap (converted to my format) */
-
- jvirt_sarray_ptr whole_image; /* Needed to reverse row order */
- JDIMENSION source_row; /* Current source row number */
- JDIMENSION row_width; /* Physical width of scanlines in file */
-
- int bits_per_pixel; /* remembers 8- or 24-bit format */
-} bmp_source_struct;
-
-
-LOCAL(int)
-read_byte (bmp_source_ptr sinfo)
-/* Read next byte from BMP file */
-{
- register FILE *infile = sinfo->pub.input_file;
- register int c;
-
- if ((c = getc(infile)) == EOF)
- ERREXIT(sinfo->cinfo, JERR_INPUT_EOF);
- return c;
-}
-
-
-LOCAL(void)
-read_colormap (bmp_source_ptr sinfo, int cmaplen, int mapentrysize)
-/* Read the colormap from a BMP file */
-{
- int i;
-
- switch (mapentrysize) {
- case 3:
- /* BGR format (occurs in OS/2 files) */
- for (i = 0; i < cmaplen; i++) {
- sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo);
- sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo);
- sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo);
- }
- break;
- case 4:
- /* BGR0 format (occurs in MS Windows files) */
- for (i = 0; i < cmaplen; i++) {
- sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo);
- sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo);
- sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo);
- (void) read_byte(sinfo);
- }
- break;
- default:
- ERREXIT(sinfo->cinfo, JERR_BMP_BADCMAP);
- break;
- }
-}
-
-
-/*
- * Read one row of pixels.
- * The image has been read into the whole_image array, but is otherwise
- * unprocessed. We must read it out in top-to-bottom row order, and if
- * it is an 8-bit image, we must expand colormapped pixels to 24bit format.
- */
-
-METHODDEF(JDIMENSION)
-get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading 8-bit colormap indexes */
-{
- bmp_source_ptr source = (bmp_source_ptr) sinfo;
- register JSAMPARRAY colormap = source->colormap;
- JSAMPARRAY image_ptr;
- register int t;
- register JSAMPROW inptr, outptr;
- register JDIMENSION col;
-
- /* Fetch next row from virtual array */
- source->source_row--;
- image_ptr = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, source->whole_image,
- source->source_row, (JDIMENSION) 1, FALSE);
-
- /* Expand the colormap indexes to real data */
- inptr = image_ptr[0];
- outptr = source->pub.buffer[0];
- for (col = cinfo->image_width; col > 0; col--) {
- t = GETJSAMPLE(*inptr++);
- *outptr++ = colormap[0][t]; /* can omit GETJSAMPLE() safely */
- *outptr++ = colormap[1][t];
- *outptr++ = colormap[2][t];
- }
-
- return 1;
-}
-
-
-METHODDEF(JDIMENSION)
-get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading 24-bit pixels */
-{
- bmp_source_ptr source = (bmp_source_ptr) sinfo;
- JSAMPARRAY image_ptr;
- register JSAMPROW inptr, outptr;
- register JDIMENSION col;
-
- /* Fetch next row from virtual array */
- source->source_row--;
- image_ptr = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, source->whole_image,
- source->source_row, (JDIMENSION) 1, FALSE);
-
- /* Transfer data. Note source values are in BGR order
- * (even though Microsoft's own documents say the opposite).
- */
- inptr = image_ptr[0];
- outptr = source->pub.buffer[0];
- for (col = cinfo->image_width; col > 0; col--) {
- outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */
- outptr[1] = *inptr++;
- outptr[0] = *inptr++;
- outptr += 3;
- }
-
- return 1;
-}
-
-
-/*
- * This method loads the image into whole_image during the first call on
- * get_pixel_rows. The get_pixel_rows pointer is then adjusted to call
- * get_8bit_row or get_24bit_row on subsequent calls.
- */
-
-METHODDEF(JDIMENSION)
-preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
- bmp_source_ptr source = (bmp_source_ptr) sinfo;
- register FILE *infile = source->pub.input_file;
- register int c;
- register JSAMPROW out_ptr;
- JSAMPARRAY image_ptr;
- JDIMENSION row, col;
- cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-
- /* Read the data into a virtual array in input-file row order. */
- for (row = 0; row < cinfo->image_height; row++) {
- if (progress != NULL) {
- progress->pub.pass_counter = (long) row;
- progress->pub.pass_limit = (long) cinfo->image_height;
- (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
- }
- image_ptr = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, source->whole_image,
- row, (JDIMENSION) 1, TRUE);
- out_ptr = image_ptr[0];
- for (col = source->row_width; col > 0; col--) {
- /* inline copy of read_byte() for speed */
- if ((c = getc(infile)) == EOF)
- ERREXIT(cinfo, JERR_INPUT_EOF);
- *out_ptr++ = (JSAMPLE) c;
- }
- }
- if (progress != NULL)
- progress->completed_extra_passes++;
-
- /* Set up to read from the virtual array in top-to-bottom order */
- switch (source->bits_per_pixel) {
- case 8:
- source->pub.get_pixel_rows = get_8bit_row;
- break;
- case 24:
- source->pub.get_pixel_rows = get_24bit_row;
- break;
- default:
- ERREXIT(cinfo, JERR_BMP_BADDEPTH);
- }
- source->source_row = cinfo->image_height;
-
- /* And read the first row */
- return (*source->pub.get_pixel_rows) (cinfo, sinfo);
-}
-
-
-/*
- * Read the file header; return image size and component count.
- */
-
-METHODDEF(void)
-start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
- bmp_source_ptr source = (bmp_source_ptr) sinfo;
- U_CHAR bmpfileheader[14];
- U_CHAR bmpinfoheader[64];
-#define GET_2B(array,offset) ((unsigned int) UCH(array[offset]) + \
- (((unsigned int) UCH(array[offset+1])) << 8))
-#define GET_4B(array,offset) ((INT32) UCH(array[offset]) + \
- (((INT32) UCH(array[offset+1])) << 8) + \
- (((INT32) UCH(array[offset+2])) << 16) + \
- (((INT32) UCH(array[offset+3])) << 24))
- INT32 bfOffBits;
- INT32 headerSize;
- INT32 biWidth = 0; /* initialize to avoid compiler warning */
- INT32 biHeight = 0;
- unsigned int biPlanes;
- INT32 biCompression;
- INT32 biXPelsPerMeter,biYPelsPerMeter;
- INT32 biClrUsed = 0;
- int mapentrysize = 0; /* 0 indicates no colormap */
- INT32 bPad;
- JDIMENSION row_width;
-
- /* Read and verify the bitmap file header */
- if (! ReadOK(source->pub.input_file, bmpfileheader, 14))
- ERREXIT(cinfo, JERR_INPUT_EOF);
- if (GET_2B(bmpfileheader,0) != 0x4D42) /* 'BM' */
- ERREXIT(cinfo, JERR_BMP_NOT);
- bfOffBits = (INT32) GET_4B(bmpfileheader,10);
- /* We ignore the remaining fileheader fields */
-
- /* The infoheader might be 12 bytes (OS/2 1.x), 40 bytes (Windows),
- * or 64 bytes (OS/2 2.x). Check the first 4 bytes to find out which.
- */
- if (! ReadOK(source->pub.input_file, bmpinfoheader, 4))
- ERREXIT(cinfo, JERR_INPUT_EOF);
- headerSize = (INT32) GET_4B(bmpinfoheader,0);
- if (headerSize < 12 || headerSize > 64)
- ERREXIT(cinfo, JERR_BMP_BADHEADER);
- if (! ReadOK(source->pub.input_file, bmpinfoheader+4, headerSize-4))
- ERREXIT(cinfo, JERR_INPUT_EOF);
-
- switch ((int) headerSize) {
- case 12:
- /* Decode OS/2 1.x header (Microsoft calls this a BITMAPCOREHEADER) */
- biWidth = (INT32) GET_2B(bmpinfoheader,4);
- biHeight = (INT32) GET_2B(bmpinfoheader,6);
- biPlanes = GET_2B(bmpinfoheader,8);
- source->bits_per_pixel = (int) GET_2B(bmpinfoheader,10);
-
- switch (source->bits_per_pixel) {
- case 8: /* colormapped image */
- mapentrysize = 3; /* OS/2 uses RGBTRIPLE colormap */
- TRACEMS2(cinfo, 1, JTRC_BMP_OS2_MAPPED, (int) biWidth, (int) biHeight);
- break;
- case 24: /* RGB image */
- TRACEMS2(cinfo, 1, JTRC_BMP_OS2, (int) biWidth, (int) biHeight);
- break;
- default:
- ERREXIT(cinfo, JERR_BMP_BADDEPTH);
- break;
- }
- if (biPlanes != 1)
- ERREXIT(cinfo, JERR_BMP_BADPLANES);
- break;
- case 40:
- case 64:
- /* Decode Windows 3.x header (Microsoft calls this a BITMAPINFOHEADER) */
- /* or OS/2 2.x header, which has additional fields that we ignore */
- biWidth = GET_4B(bmpinfoheader,4);
- biHeight = GET_4B(bmpinfoheader,8);
- biPlanes = GET_2B(bmpinfoheader,12);
- source->bits_per_pixel = (int) GET_2B(bmpinfoheader,14);
- biCompression = GET_4B(bmpinfoheader,16);
- biXPelsPerMeter = GET_4B(bmpinfoheader,24);
- biYPelsPerMeter = GET_4B(bmpinfoheader,28);
- biClrUsed = GET_4B(bmpinfoheader,32);
- /* biSizeImage, biClrImportant fields are ignored */
-
- switch (source->bits_per_pixel) {
- case 8: /* colormapped image */
- mapentrysize = 4; /* Windows uses RGBQUAD colormap */
- TRACEMS2(cinfo, 1, JTRC_BMP_MAPPED, (int) biWidth, (int) biHeight);
- break;
- case 24: /* RGB image */
- TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight);
- break;
- default:
- ERREXIT(cinfo, JERR_BMP_BADDEPTH);
- break;
- }
- if (biPlanes != 1)
- ERREXIT(cinfo, JERR_BMP_BADPLANES);
- if (biCompression != 0)
- ERREXIT(cinfo, JERR_BMP_COMPRESSED);
-
- if (biXPelsPerMeter > 0 && biYPelsPerMeter > 0) {
- /* Set JFIF density parameters from the BMP data */
- cinfo->X_density = (UINT16) (biXPelsPerMeter/100); /* 100 cm per meter */
- cinfo->Y_density = (UINT16) (biYPelsPerMeter/100);
- cinfo->density_unit = 2; /* dots/cm */
- }
- break;
- default:
- ERREXIT(cinfo, JERR_BMP_BADHEADER);
- break;
- }
-
- /* Compute distance to bitmap data --- will adjust for colormap below */
- bPad = bfOffBits - (headerSize + 14);
-
- /* Read the colormap, if any */
- if (mapentrysize > 0) {
- if (biClrUsed <= 0)
- biClrUsed = 256; /* assume it's 256 */
- else if (biClrUsed > 256)
- ERREXIT(cinfo, JERR_BMP_BADCMAP);
- /* Allocate space to store the colormap */
- source->colormap = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (JDIMENSION) biClrUsed, (JDIMENSION) 3);
- /* and read it from the file */
- read_colormap(source, (int) biClrUsed, mapentrysize);
- /* account for size of colormap */
- bPad -= biClrUsed * mapentrysize;
- }
-
- /* Skip any remaining pad bytes */
- if (bPad < 0) /* incorrect bfOffBits value? */
- ERREXIT(cinfo, JERR_BMP_BADHEADER);
- while (--bPad >= 0) {
- (void) read_byte(source);
- }
-
- /* Compute row width in file, including padding to 4-byte boundary */
- if (source->bits_per_pixel == 24)
- row_width = (JDIMENSION) (biWidth * 3);
- else
- row_width = (JDIMENSION) biWidth;
- while ((row_width & 3) != 0) row_width++;
- source->row_width = row_width;
-
- /* Allocate space for inversion array, prepare for preload pass */
- source->whole_image = (*cinfo->mem->request_virt_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
- row_width, (JDIMENSION) biHeight, (JDIMENSION) 1);
- source->pub.get_pixel_rows = preload_image;
- if (cinfo->progress != NULL) {
- cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
- progress->total_extra_passes++; /* count file input as separate pass */
- }
-
- /* Allocate one-row buffer for returned data */
- source->pub.buffer = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (JDIMENSION) (biWidth * 3), (JDIMENSION) 1);
- source->pub.buffer_height = 1;
-
- cinfo->in_color_space = JCS_RGB;
- cinfo->input_components = 3;
- cinfo->data_precision = 8;
- cinfo->image_width = (JDIMENSION) biWidth;
- cinfo->image_height = (JDIMENSION) biHeight;
-}
-
-
-/*
- * Finish up at the end of the file.
- */
-
-METHODDEF(void)
-finish_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
- /* no work */
-}
-
-
-/*
- * The module selection routine for BMP format input.
- */
-
-GLOBAL(cjpeg_source_ptr)
-jinit_read_bmp (j_compress_ptr cinfo)
-{
- bmp_source_ptr source;
-
- /* Create module interface object */
- source = (bmp_source_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(bmp_source_struct));
- source->cinfo = cinfo; /* make back link for subroutines */
- /* Fill in method ptrs, except get_pixel_rows which start_input sets */
- source->pub.start_input = start_input_bmp;
- source->pub.finish_input = finish_input_bmp;
-
- return (cjpeg_source_ptr) source;
-}
-
-#endif /* BMP_SUPPORTED */
diff --git a/libjpegtwrp/rdcolmap.c b/libjpegtwrp/rdcolmap.c
deleted file mode 100644
index 42b343763..000000000
--- a/libjpegtwrp/rdcolmap.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * rdcolmap.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file implements djpeg's "-map file" switch. It reads a source image
- * and constructs a colormap to be supplied to the JPEG decompressor.
- *
- * Currently, these file formats are supported for the map file:
- * GIF: the contents of the GIF's global colormap are used.
- * PPM (either text or raw flavor): the entire file is read and
- * each unique pixel value is entered in the map.
- * Note that reading a large PPM file will be horrendously slow.
- * Typically, a PPM-format map file should contain just one pixel
- * of each desired color. Such a file can be extracted from an
- * ordinary image PPM file with ppmtomap(1).
- *
- * Rescaling a PPM that has a maxval unequal to MAXJSAMPLE is not
- * currently implemented.
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-
-#ifdef QUANT_2PASS_SUPPORTED /* otherwise can't quantize to supplied map */
-
-/* Portions of this code are based on the PBMPLUS library, which is:
-**
-** Copyright (C) 1988 by Jef Poskanzer.
-**
-** Permission to use, copy, modify, and distribute this software and its
-** documentation for any purpose and without fee is hereby granted, provided
-** that the above copyright notice appear in all copies and that both that
-** copyright notice and this permission notice appear in supporting
-** documentation. This software is provided "as is" without express or
-** implied warranty.
-*/
-
-
-/*
- * Add a (potentially) new color to the color map.
- */
-
-LOCAL(void)
-add_map_entry (j_decompress_ptr cinfo, int R, int G, int B)
-{
- JSAMPROW colormap0 = cinfo->colormap[0];
- JSAMPROW colormap1 = cinfo->colormap[1];
- JSAMPROW colormap2 = cinfo->colormap[2];
- int ncolors = cinfo->actual_number_of_colors;
- int index;
-
- /* Check for duplicate color. */
- for (index = 0; index < ncolors; index++) {
- if (GETJSAMPLE(colormap0[index]) == R &&
- GETJSAMPLE(colormap1[index]) == G &&
- GETJSAMPLE(colormap2[index]) == B)
- return; /* color is already in map */
- }
-
- /* Check for map overflow. */
- if (ncolors >= (MAXJSAMPLE+1))
- ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, (MAXJSAMPLE+1));
-
- /* OK, add color to map. */
- colormap0[ncolors] = (JSAMPLE) R;
- colormap1[ncolors] = (JSAMPLE) G;
- colormap2[ncolors] = (JSAMPLE) B;
- cinfo->actual_number_of_colors++;
-}
-
-
-/*
- * Extract color map from a GIF file.
- */
-
-LOCAL(void)
-read_gif_map (j_decompress_ptr cinfo, FILE * infile)
-{
- int header[13];
- int i, colormaplen;
- int R, G, B;
-
- /* Initial 'G' has already been read by read_color_map */
- /* Read the rest of the GIF header and logical screen descriptor */
- for (i = 1; i < 13; i++) {
- if ((header[i] = getc(infile)) == EOF)
- ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
- }
-
- /* Verify GIF Header */
- if (header[1] != 'I' || header[2] != 'F')
- ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-
- /* There must be a global color map. */
- if ((header[10] & 0x80) == 0)
- ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-
- /* OK, fetch it. */
- colormaplen = 2 << (header[10] & 0x07);
-
- for (i = 0; i < colormaplen; i++) {
- R = getc(infile);
- G = getc(infile);
- B = getc(infile);
- if (R == EOF || G == EOF || B == EOF)
- ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
- add_map_entry(cinfo,
- R << (BITS_IN_JSAMPLE-8),
- G << (BITS_IN_JSAMPLE-8),
- B << (BITS_IN_JSAMPLE-8));
- }
-}
-
-
-/* Support routines for reading PPM */
-
-
-LOCAL(int)
-pbm_getc (FILE * infile)
-/* Read next char, skipping over any comments */
-/* A comment/newline sequence is returned as a newline */
-{
- register int ch;
-
- ch = getc(infile);
- if (ch == '#') {
- do {
- ch = getc(infile);
- } while (ch != '\n' && ch != EOF);
- }
- return ch;
-}
-
-
-LOCAL(unsigned int)
-read_pbm_integer (j_decompress_ptr cinfo, FILE * infile)
-/* Read an unsigned decimal integer from the PPM file */
-/* Swallows one trailing character after the integer */
-/* Note that on a 16-bit-int machine, only values up to 64k can be read. */
-/* This should not be a problem in practice. */
-{
- register int ch;
- register unsigned int val;
-
- /* Skip any leading whitespace */
- do {
- ch = pbm_getc(infile);
- if (ch == EOF)
- ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
- } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r');
-
- if (ch < '0' || ch > '9')
- ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-
- val = ch - '0';
- while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') {
- val *= 10;
- val += ch - '0';
- }
- return val;
-}
-
-
-/*
- * Extract color map from a PPM file.
- */
-
-LOCAL(void)
-read_ppm_map (j_decompress_ptr cinfo, FILE * infile)
-{
- int c;
- unsigned int w, h, maxval, row, col;
- int R, G, B;
-
- /* Initial 'P' has already been read by read_color_map */
- c = getc(infile); /* save format discriminator for a sec */
-
- /* while we fetch the remaining header info */
- w = read_pbm_integer(cinfo, infile);
- h = read_pbm_integer(cinfo, infile);
- maxval = read_pbm_integer(cinfo, infile);
-
- if (w <= 0 || h <= 0 || maxval <= 0) /* error check */
- ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-
- /* For now, we don't support rescaling from an unusual maxval. */
- if (maxval != (unsigned int) MAXJSAMPLE)
- ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-
- switch (c) {
- case '3': /* it's a text-format PPM file */
- for (row = 0; row < h; row++) {
- for (col = 0; col < w; col++) {
- R = read_pbm_integer(cinfo, infile);
- G = read_pbm_integer(cinfo, infile);
- B = read_pbm_integer(cinfo, infile);
- add_map_entry(cinfo, R, G, B);
- }
- }
- break;
-
- case '6': /* it's a raw-format PPM file */
- for (row = 0; row < h; row++) {
- for (col = 0; col < w; col++) {
- R = getc(infile);
- G = getc(infile);
- B = getc(infile);
- if (R == EOF || G == EOF || B == EOF)
- ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
- add_map_entry(cinfo, R, G, B);
- }
- }
- break;
-
- default:
- ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
- break;
- }
-}
-
-
-/*
- * Main entry point from djpeg.c.
- * Input: opened input file (from file name argument on command line).
- * Output: colormap and actual_number_of_colors fields are set in cinfo.
- */
-
-GLOBAL(void)
-read_color_map (j_decompress_ptr cinfo, FILE * infile)
-{
- /* Allocate space for a color map of maximum supported size. */
- cinfo->colormap = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (JDIMENSION) (MAXJSAMPLE+1), (JDIMENSION) 3);
- cinfo->actual_number_of_colors = 0; /* initialize map to empty */
-
- /* Read first byte to determine file format */
- switch (getc(infile)) {
- case 'G':
- read_gif_map(cinfo, infile);
- break;
- case 'P':
- read_ppm_map(cinfo, infile);
- break;
- default:
- ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
- break;
- }
-}
-
-#endif /* QUANT_2PASS_SUPPORTED */
diff --git a/libjpegtwrp/rdgif.c b/libjpegtwrp/rdgif.c
deleted file mode 100644
index b27c1675d..000000000
--- a/libjpegtwrp/rdgif.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * rdgif.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to read input images in GIF format.
- *
- *****************************************************************************
- * NOTE: to avoid entanglements with Unisys' patent on LZW compression, *
- * the ability to read GIF files has been removed from the IJG distribution. *
- * Sorry about that. *
- *****************************************************************************
- *
- * We are required to state that
- * "The Graphics Interchange Format(c) is the Copyright property of
- * CompuServe Incorporated. GIF(sm) is a Service Mark property of
- * CompuServe Incorporated."
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-
-#ifdef GIF_SUPPORTED
-
-/*
- * The module selection routine for GIF format input.
- */
-
-GLOBAL(cjpeg_source_ptr)
-jinit_read_gif (j_compress_ptr cinfo)
-{
- fprintf(stderr, "GIF input is unsupported for legal reasons. Sorry.\n");
- exit(EXIT_FAILURE);
- return NULL; /* keep compiler happy */
-}
-
-#endif /* GIF_SUPPORTED */
diff --git a/libjpegtwrp/rdjpgcom.1 b/libjpegtwrp/rdjpgcom.1
deleted file mode 100644
index 2bba04e1a..000000000
--- a/libjpegtwrp/rdjpgcom.1
+++ /dev/null
@@ -1,54 +0,0 @@
-.TH RDJPGCOM 1 "11 October 1997"
-.SH NAME
-rdjpgcom \- display text comments from a JPEG file
-.SH SYNOPSIS
-.B rdjpgcom
-[
-.B \-verbose
-]
-[
-.I filename
-]
-.LP
-.SH DESCRIPTION
-.LP
-.B rdjpgcom
-reads the named JPEG/JFIF file, or the standard input if no file is named,
-and prints any text comments found in the file on the standard output.
-.PP
-The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file.
-Although the standard doesn't actually define what COM blocks are for, they
-are widely used to hold user-supplied text strings. This lets you add
-annotations, titles, index terms, etc to your JPEG files, and later retrieve
-them as text. COM blocks do not interfere with the image stored in the JPEG
-file. The maximum size of a COM block is 64K, but you can have as many of
-them as you like in one JPEG file.
-.SH OPTIONS
-.TP
-.B \-verbose
-Causes
-.B rdjpgcom
-to also display the JPEG image dimensions.
-.PP
-Switch names may be abbreviated, and are not case sensitive.
-.SH HINTS
-.B rdjpgcom
-does not depend on the IJG JPEG library. Its source code is intended as an
-illustration of the minimum amount of code required to parse a JPEG file
-header correctly.
-.PP
-In
-.B \-verbose
-mode,
-.B rdjpgcom
-will also attempt to print the contents of any "APP12" markers as text.
-Some digital cameras produce APP12 markers containing useful textual
-information. If you like, you can modify the source code to print
-other APPn marker types as well.
-.SH SEE ALSO
-.BR cjpeg (1),
-.BR djpeg (1),
-.BR jpegtran (1),
-.BR wrjpgcom (1)
-.SH AUTHOR
-Independent JPEG Group
diff --git a/libjpegtwrp/rdjpgcom.c b/libjpegtwrp/rdjpgcom.c
deleted file mode 100644
index ffe6fc621..000000000
--- a/libjpegtwrp/rdjpgcom.c
+++ /dev/null
@@ -1,496 +0,0 @@
-/*
- * rdjpgcom.c
- *
- * Copyright (C) 1994-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a very simple stand-alone application that displays
- * the text in COM (comment) markers in a JFIF file.
- * This may be useful as an example of the minimum logic needed to parse
- * JPEG markers.
- */
-
-#define JPEG_CJPEG_DJPEG /* to get the command-line config symbols */
-#include "jinclude.h" /* get auto-config symbols, <stdio.h> */
-
-#include <ctype.h> /* to declare isupper(), tolower() */
-#ifdef USE_SETMODE
-#include <fcntl.h> /* to declare setmode()'s parameter macros */
-/* If you have setmode() but not <io.h>, just delete this line: */
-#include <io.h> /* to declare setmode() */
-#endif
-
-#ifdef USE_CCOMMAND /* command-line reader for Macintosh */
-#ifdef __MWERKS__
-#include <SIOUX.h> /* Metrowerks needs this */
-#include <console.h> /* ... and this */
-#endif
-#ifdef THINK_C
-#include <console.h> /* Think declares it here */
-#endif
-#endif
-
-#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */
-#define READ_BINARY "r"
-#else
-#ifdef VMS /* VMS is very nonstandard */
-#define READ_BINARY "rb", "ctx=stm"
-#else /* standard ANSI-compliant case */
-#define READ_BINARY "rb"
-#endif
-#endif
-
-#ifndef EXIT_FAILURE /* define exit() codes if not provided */
-#define EXIT_FAILURE 1
-#endif
-#ifndef EXIT_SUCCESS
-#ifdef VMS
-#define EXIT_SUCCESS 1 /* VMS is very nonstandard */
-#else
-#define EXIT_SUCCESS 0
-#endif
-#endif
-
-
-/*
- * These macros are used to read the input file.
- * To reuse this code in another application, you might need to change these.
- */
-
-static FILE * infile; /* input JPEG file */
-
-/* Return next input byte, or EOF if no more */
-#define NEXTBYTE() getc(infile)
-
-
-/* Error exit handler */
-#define ERREXIT(msg) (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE))
-
-
-/* Read one byte, testing for EOF */
-static int
-read_1_byte (void)
-{
- int c;
-
- c = NEXTBYTE();
- if (c == EOF)
- ERREXIT("Premature EOF in JPEG file");
- return c;
-}
-
-/* Read 2 bytes, convert to unsigned int */
-/* All 2-byte quantities in JPEG markers are MSB first */
-static unsigned int
-read_2_bytes (void)
-{
- int c1, c2;
-
- c1 = NEXTBYTE();
- if (c1 == EOF)
- ERREXIT("Premature EOF in JPEG file");
- c2 = NEXTBYTE();
- if (c2 == EOF)
- ERREXIT("Premature EOF in JPEG file");
- return (((unsigned int) c1) << 8) + ((unsigned int) c2);
-}
-
-
-/*
- * JPEG markers consist of one or more 0xFF bytes, followed by a marker
- * code byte (which is not an FF). Here are the marker codes of interest
- * in this program. (See jdmarker.c for a more complete list.)
- */
-
-#define M_SOF0 0xC0 /* Start Of Frame N */
-#define M_SOF1 0xC1 /* N indicates which compression process */
-#define M_SOF2 0xC2 /* Only SOF0-SOF2 are now in common use */
-#define M_SOF3 0xC3
-#define M_SOF5 0xC5 /* NB: codes C4 and CC are NOT SOF markers */
-#define M_SOF6 0xC6
-#define M_SOF7 0xC7
-#define M_SOF9 0xC9
-#define M_SOF10 0xCA
-#define M_SOF11 0xCB
-#define M_SOF13 0xCD
-#define M_SOF14 0xCE
-#define M_SOF15 0xCF
-#define M_SOI 0xD8 /* Start Of Image (beginning of datastream) */
-#define M_EOI 0xD9 /* End Of Image (end of datastream) */
-#define M_SOS 0xDA /* Start Of Scan (begins compressed data) */
-#define M_APP0 0xE0 /* Application-specific marker, type N */
-#define M_APP12 0xEC /* (we don't bother to list all 16 APPn's) */
-#define M_COM 0xFE /* COMment */
-
-
-/*
- * Find the next JPEG marker and return its marker code.
- * We expect at least one FF byte, possibly more if the compressor used FFs
- * to pad the file.
- * There could also be non-FF garbage between markers. The treatment of such
- * garbage is unspecified; we choose to skip over it but emit a warning msg.
- * NB: this routine must not be used after seeing SOS marker, since it will
- * not deal correctly with FF/00 sequences in the compressed image data...
- */
-
-static int
-next_marker (void)
-{
- int c;
- int discarded_bytes = 0;
-
- /* Find 0xFF byte; count and skip any non-FFs. */
- c = read_1_byte();
- while (c != 0xFF) {
- discarded_bytes++;
- c = read_1_byte();
- }
- /* Get marker code byte, swallowing any duplicate FF bytes. Extra FFs
- * are legal as pad bytes, so don't count them in discarded_bytes.
- */
- do {
- c = read_1_byte();
- } while (c == 0xFF);
-
- if (discarded_bytes != 0) {
- fprintf(stderr, "Warning: garbage data found in JPEG file\n");
- }
-
- return c;
-}
-
-
-/*
- * Read the initial marker, which should be SOI.
- * For a JFIF file, the first two bytes of the file should be literally
- * 0xFF M_SOI. To be more general, we could use next_marker, but if the
- * input file weren't actually JPEG at all, next_marker might read the whole
- * file and then return a misleading error message...
- */
-
-static int
-first_marker (void)
-{
- int c1, c2;
-
- c1 = NEXTBYTE();
- c2 = NEXTBYTE();
- if (c1 != 0xFF || c2 != M_SOI)
- ERREXIT("Not a JPEG file");
- return c2;
-}
-
-
-/*
- * Most types of marker are followed by a variable-length parameter segment.
- * This routine skips over the parameters for any marker we don't otherwise
- * want to process.
- * Note that we MUST skip the parameter segment explicitly in order not to
- * be fooled by 0xFF bytes that might appear within the parameter segment;
- * such bytes do NOT introduce new markers.
- */
-
-static void
-skip_variable (void)
-/* Skip over an unknown or uninteresting variable-length marker */
-{
- unsigned int length;
-
- /* Get the marker parameter length count */
- length = read_2_bytes();
- /* Length includes itself, so must be at least 2 */
- if (length < 2)
- ERREXIT("Erroneous JPEG marker length");
- length -= 2;
- /* Skip over the remaining bytes */
- while (length > 0) {
- (void) read_1_byte();
- length--;
- }
-}
-
-
-/*
- * Process a COM marker.
- * We want to print out the marker contents as legible text;
- * we must guard against non-text junk and varying newline representations.
- */
-
-static void
-process_COM (void)
-{
- unsigned int length;
- int ch;
- int lastch = 0;
-
- /* Get the marker parameter length count */
- length = read_2_bytes();
- /* Length includes itself, so must be at least 2 */
- if (length < 2)
- ERREXIT("Erroneous JPEG marker length");
- length -= 2;
-
- while (length > 0) {
- ch = read_1_byte();
- /* Emit the character in a readable form.
- * Nonprintables are converted to \nnn form,
- * while \ is converted to \\.
- * Newlines in CR, CR/LF, or LF form will be printed as one newline.
- */
- if (ch == '\r') {
- printf("\n");
- } else if (ch == '\n') {
- if (lastch != '\r')
- printf("\n");
- } else if (ch == '\\') {
- printf("\\\\");
- } else if (isprint(ch)) {
- putc(ch, stdout);
- } else {
- printf("\\%03o", ch);
- }
- lastch = ch;
- length--;
- }
- printf("\n");
-}
-
-
-/*
- * Process a SOFn marker.
- * This code is only needed if you want to know the image dimensions...
- */
-
-static void
-process_SOFn (int marker)
-{
- unsigned int length;
- unsigned int image_height, image_width;
- int data_precision, num_components;
- const char * process;
- int ci;
-
- length = read_2_bytes(); /* usual parameter length count */
-
- data_precision = read_1_byte();
- image_height = read_2_bytes();
- image_width = read_2_bytes();
- num_components = read_1_byte();
-
- switch (marker) {
- case M_SOF0: process = "Baseline"; break;
- case M_SOF1: process = "Extended sequential"; break;
- case M_SOF2: process = "Progressive"; break;
- case M_SOF3: process = "Lossless"; break;
- case M_SOF5: process = "Differential sequential"; break;
- case M_SOF6: process = "Differential progressive"; break;
- case M_SOF7: process = "Differential lossless"; break;
- case M_SOF9: process = "Extended sequential, arithmetic coding"; break;
- case M_SOF10: process = "Progressive, arithmetic coding"; break;
- case M_SOF11: process = "Lossless, arithmetic coding"; break;
- case M_SOF13: process = "Differential sequential, arithmetic coding"; break;
- case M_SOF14: process = "Differential progressive, arithmetic coding"; break;
- case M_SOF15: process = "Differential lossless, arithmetic coding"; break;
- default: process = "Unknown"; break;
- }
-
- printf("JPEG image is %uw * %uh, %d color components, %d bits per sample\n",
- image_width, image_height, num_components, data_precision);
- printf("JPEG process: %s\n", process);
-
- if (length != (unsigned int) (8 + num_components * 3))
- ERREXIT("Bogus SOF marker length");
-
- for (ci = 0; ci < num_components; ci++) {
- (void) read_1_byte(); /* Component ID code */
- (void) read_1_byte(); /* H, V sampling factors */
- (void) read_1_byte(); /* Quantization table number */
- }
-}
-
-
-/*
- * Parse the marker stream until SOS or EOI is seen;
- * display any COM markers.
- * While the companion program wrjpgcom will always insert COM markers before
- * SOFn, other implementations might not, so we scan to SOS before stopping.
- * If we were only interested in the image dimensions, we would stop at SOFn.
- * (Conversely, if we only cared about COM markers, there would be no need
- * for special code to handle SOFn; we could treat it like other markers.)
- */
-
-static int
-scan_JPEG_header (int verbose)
-{
- int marker;
-
- /* Expect SOI at start of file */
- if (first_marker() != M_SOI)
- ERREXIT("Expected SOI marker first");
-
- /* Scan miscellaneous markers until we reach SOS. */
- for (;;) {
- marker = next_marker();
- switch (marker) {
- /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be,
- * treated as SOFn. C4 in particular is actually DHT.
- */
- case M_SOF0: /* Baseline */
- case M_SOF1: /* Extended sequential, Huffman */
- case M_SOF2: /* Progressive, Huffman */
- case M_SOF3: /* Lossless, Huffman */
- case M_SOF5: /* Differential sequential, Huffman */
- case M_SOF6: /* Differential progressive, Huffman */
- case M_SOF7: /* Differential lossless, Huffman */
- case M_SOF9: /* Extended sequential, arithmetic */
- case M_SOF10: /* Progressive, arithmetic */
- case M_SOF11: /* Lossless, arithmetic */
- case M_SOF13: /* Differential sequential, arithmetic */
- case M_SOF14: /* Differential progressive, arithmetic */
- case M_SOF15: /* Differential lossless, arithmetic */
- if (verbose)
- process_SOFn(marker);
- else
- skip_variable();
- break;
-
- case M_SOS: /* stop before hitting compressed data */
- return marker;
-
- case M_EOI: /* in case it's a tables-only JPEG stream */
- return marker;
-
- case M_COM:
- process_COM();
- break;
-
- case M_APP12:
- /* Some digital camera makers put useful textual information into
- * APP12 markers, so we print those out too when in -verbose mode.
- */
- if (verbose) {
- printf("APP12 contains:\n");
- process_COM();
- } else
- skip_variable();
- break;
-
- default: /* Anything else just gets skipped */
- skip_variable(); /* we assume it has a parameter count... */
- break;
- }
- } /* end loop */
-}
-
-
-/* Command line parsing code */
-
-static const char * progname; /* program name for error messages */
-
-
-static void
-usage (void)
-/* complain about bad command line */
-{
- fprintf(stderr, "rdjpgcom displays any textual comments in a JPEG file.\n");
-
- fprintf(stderr, "Usage: %s [switches] [inputfile]\n", progname);
-
- fprintf(stderr, "Switches (names may be abbreviated):\n");
- fprintf(stderr, " -verbose Also display dimensions of JPEG image\n");
-
- exit(EXIT_FAILURE);
-}
-
-
-static int
-keymatch (char * arg, const char * keyword, int minchars)
-/* Case-insensitive matching of (possibly abbreviated) keyword switches. */
-/* keyword is the constant keyword (must be lower case already), */
-/* minchars is length of minimum legal abbreviation. */
-{
- register int ca, ck;
- register int nmatched = 0;
-
- while ((ca = *arg++) != '\0') {
- if ((ck = *keyword++) == '\0')
- return 0; /* arg longer than keyword, no good */
- if (isupper(ca)) /* force arg to lcase (assume ck is already) */
- ca = tolower(ca);
- if (ca != ck)
- return 0; /* no good */
- nmatched++; /* count matched characters */
- }
- /* reached end of argument; fail if it's too short for unique abbrev */
- if (nmatched < minchars)
- return 0;
- return 1; /* A-OK */
-}
-
-
-/*
- * The main program.
- */
-
-int
-main (int argc, char **argv)
-{
- int argn;
- char * arg;
- int verbose = 0;
-
- /* On Mac, fetch a command line. */
-#ifdef USE_CCOMMAND
- argc = ccommand(&argv);
-#endif
-
- progname = argv[0];
- if (progname == NULL || progname[0] == 0)
- progname = "rdjpgcom"; /* in case C library doesn't provide it */
-
- /* Parse switches, if any */
- for (argn = 1; argn < argc; argn++) {
- arg = argv[argn];
- if (arg[0] != '-')
- break; /* not switch, must be file name */
- arg++; /* advance over '-' */
- if (keymatch(arg, "verbose", 1)) {
- verbose++;
- } else
- usage();
- }
-
- /* Open the input file. */
- /* Unix style: expect zero or one file name */
- if (argn < argc-1) {
- fprintf(stderr, "%s: only one input file\n", progname);
- usage();
- }
- if (argn < argc) {
- if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) {
- fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
- exit(EXIT_FAILURE);
- }
- } else {
- /* default input file is stdin */
-#ifdef USE_SETMODE /* need to hack file mode? */
- setmode(fileno(stdin), O_BINARY);
-#endif
-#ifdef USE_FDOPEN /* need to re-open in binary mode? */
- if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) {
- fprintf(stderr, "%s: can't open stdin\n", progname);
- exit(EXIT_FAILURE);
- }
-#else
- infile = stdin;
-#endif
- }
-
- /* Scan the JPEG headers. */
- (void) scan_JPEG_header(verbose);
-
- /* All done. */
- exit(EXIT_SUCCESS);
- return 0; /* suppress no-return-value warnings */
-}
diff --git a/libjpegtwrp/rdppm.c b/libjpegtwrp/rdppm.c
deleted file mode 100644
index 1df35c1b3..000000000
--- a/libjpegtwrp/rdppm.c
+++ /dev/null
@@ -1,458 +0,0 @@
-/*
- * rdppm.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to read input images in PPM/PGM format.
- * The extended 2-byte-per-sample raw PPM/PGM formats are supported.
- * The PBMPLUS library is NOT required to compile this software
- * (but it is highly useful as a set of PPM image manipulation programs).
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications. As they stand, they assume input from
- * an ordinary stdio stream. They further assume that reading begins
- * at the start of the file; start_input may need work if the
- * user interface has already read some data (e.g., to determine that
- * the file is indeed PPM format).
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-
-#ifdef PPM_SUPPORTED
-
-
-/* Portions of this code are based on the PBMPLUS library, which is:
-**
-** Copyright (C) 1988 by Jef Poskanzer.
-**
-** Permission to use, copy, modify, and distribute this software and its
-** documentation for any purpose and without fee is hereby granted, provided
-** that the above copyright notice appear in all copies and that both that
-** copyright notice and this permission notice appear in supporting
-** documentation. This software is provided "as is" without express or
-** implied warranty.
-*/
-
-
-/* Macros to deal with unsigned chars as efficiently as compiler allows */
-
-#ifdef HAVE_UNSIGNED_CHAR
-typedef unsigned char U_CHAR;
-#define UCH(x) ((int) (x))
-#else /* !HAVE_UNSIGNED_CHAR */
-#ifdef CHAR_IS_UNSIGNED
-typedef char U_CHAR;
-#define UCH(x) ((int) (x))
-#else
-typedef char U_CHAR;
-#define UCH(x) ((int) (x) & 0xFF)
-#endif
-#endif /* HAVE_UNSIGNED_CHAR */
-
-
-#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len)))
-
-
-/*
- * On most systems, reading individual bytes with getc() is drastically less
- * efficient than buffering a row at a time with fread(). On PCs, we must
- * allocate the buffer in near data space, because we are assuming small-data
- * memory model, wherein fread() can't reach far memory. If you need to
- * process very wide images on a PC, you might have to compile in large-memory
- * model, or else replace fread() with a getc() loop --- which will be much
- * slower.
- */
-
-
-/* Private version of data source object */
-
-typedef struct {
- struct cjpeg_source_struct pub; /* public fields */
-
- U_CHAR *iobuffer; /* non-FAR pointer to I/O buffer */
- JSAMPROW pixrow; /* FAR pointer to same */
- size_t buffer_width; /* width of I/O buffer */
- JSAMPLE *rescale; /* => maxval-remapping array, or NULL */
-} ppm_source_struct;
-
-typedef ppm_source_struct * ppm_source_ptr;
-
-
-LOCAL(int)
-pbm_getc (FILE * infile)
-/* Read next char, skipping over any comments */
-/* A comment/newline sequence is returned as a newline */
-{
- register int ch;
-
- ch = getc(infile);
- if (ch == '#') {
- do {
- ch = getc(infile);
- } while (ch != '\n' && ch != EOF);
- }
- return ch;
-}
-
-
-LOCAL(unsigned int)
-read_pbm_integer (j_compress_ptr cinfo, FILE * infile)
-/* Read an unsigned decimal integer from the PPM file */
-/* Swallows one trailing character after the integer */
-/* Note that on a 16-bit-int machine, only values up to 64k can be read. */
-/* This should not be a problem in practice. */
-{
- register int ch;
- register unsigned int val;
-
- /* Skip any leading whitespace */
- do {
- ch = pbm_getc(infile);
- if (ch == EOF)
- ERREXIT(cinfo, JERR_INPUT_EOF);
- } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r');
-
- if (ch < '0' || ch > '9')
- ERREXIT(cinfo, JERR_PPM_NONNUMERIC);
-
- val = ch - '0';
- while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') {
- val *= 10;
- val += ch - '0';
- }
- return val;
-}
-
-
-/*
- * Read one row of pixels.
- *
- * We provide several different versions depending on input file format.
- * In all cases, input is scaled to the size of JSAMPLE.
- *
- * A really fast path is provided for reading byte/sample raw files with
- * maxval = MAXJSAMPLE, which is the normal case for 8-bit data.
- */
-
-
-METHODDEF(JDIMENSION)
-get_text_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading text-format PGM files with any maxval */
-{
- ppm_source_ptr source = (ppm_source_ptr) sinfo;
- FILE * infile = source->pub.input_file;
- register JSAMPROW ptr;
- register JSAMPLE *rescale = source->rescale;
- JDIMENSION col;
-
- ptr = source->pub.buffer[0];
- for (col = cinfo->image_width; col > 0; col--) {
- *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
- }
- return 1;
-}
-
-
-METHODDEF(JDIMENSION)
-get_text_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading text-format PPM files with any maxval */
-{
- ppm_source_ptr source = (ppm_source_ptr) sinfo;
- FILE * infile = source->pub.input_file;
- register JSAMPROW ptr;
- register JSAMPLE *rescale = source->rescale;
- JDIMENSION col;
-
- ptr = source->pub.buffer[0];
- for (col = cinfo->image_width; col > 0; col--) {
- *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
- *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
- *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
- }
- return 1;
-}
-
-
-METHODDEF(JDIMENSION)
-get_scaled_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading raw-byte-format PGM files with any maxval */
-{
- ppm_source_ptr source = (ppm_source_ptr) sinfo;
- register JSAMPROW ptr;
- register U_CHAR * bufferptr;
- register JSAMPLE *rescale = source->rescale;
- JDIMENSION col;
-
- if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
- ERREXIT(cinfo, JERR_INPUT_EOF);
- ptr = source->pub.buffer[0];
- bufferptr = source->iobuffer;
- for (col = cinfo->image_width; col > 0; col--) {
- *ptr++ = rescale[UCH(*bufferptr++)];
- }
- return 1;
-}
-
-
-METHODDEF(JDIMENSION)
-get_scaled_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading raw-byte-format PPM files with any maxval */
-{
- ppm_source_ptr source = (ppm_source_ptr) sinfo;
- register JSAMPROW ptr;
- register U_CHAR * bufferptr;
- register JSAMPLE *rescale = source->rescale;
- JDIMENSION col;
-
- if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
- ERREXIT(cinfo, JERR_INPUT_EOF);
- ptr = source->pub.buffer[0];
- bufferptr = source->iobuffer;
- for (col = cinfo->image_width; col > 0; col--) {
- *ptr++ = rescale[UCH(*bufferptr++)];
- *ptr++ = rescale[UCH(*bufferptr++)];
- *ptr++ = rescale[UCH(*bufferptr++)];
- }
- return 1;
-}
-
-
-METHODDEF(JDIMENSION)
-get_raw_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading raw-byte-format files with maxval = MAXJSAMPLE.
- * In this case we just read right into the JSAMPLE buffer!
- * Note that same code works for PPM and PGM files.
- */
-{
- ppm_source_ptr source = (ppm_source_ptr) sinfo;
-
- if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
- ERREXIT(cinfo, JERR_INPUT_EOF);
- return 1;
-}
-
-
-METHODDEF(JDIMENSION)
-get_word_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading raw-word-format PGM files with any maxval */
-{
- ppm_source_ptr source = (ppm_source_ptr) sinfo;
- register JSAMPROW ptr;
- register U_CHAR * bufferptr;
- register JSAMPLE *rescale = source->rescale;
- JDIMENSION col;
-
- if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
- ERREXIT(cinfo, JERR_INPUT_EOF);
- ptr = source->pub.buffer[0];
- bufferptr = source->iobuffer;
- for (col = cinfo->image_width; col > 0; col--) {
- register int temp;
- temp = UCH(*bufferptr++);
- temp |= UCH(*bufferptr++) << 8;
- *ptr++ = rescale[temp];
- }
- return 1;
-}
-
-
-METHODDEF(JDIMENSION)
-get_word_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading raw-word-format PPM files with any maxval */
-{
- ppm_source_ptr source = (ppm_source_ptr) sinfo;
- register JSAMPROW ptr;
- register U_CHAR * bufferptr;
- register JSAMPLE *rescale = source->rescale;
- JDIMENSION col;
-
- if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
- ERREXIT(cinfo, JERR_INPUT_EOF);
- ptr = source->pub.buffer[0];
- bufferptr = source->iobuffer;
- for (col = cinfo->image_width; col > 0; col--) {
- register int temp;
- temp = UCH(*bufferptr++);
- temp |= UCH(*bufferptr++) << 8;
- *ptr++ = rescale[temp];
- temp = UCH(*bufferptr++);
- temp |= UCH(*bufferptr++) << 8;
- *ptr++ = rescale[temp];
- temp = UCH(*bufferptr++);
- temp |= UCH(*bufferptr++) << 8;
- *ptr++ = rescale[temp];
- }
- return 1;
-}
-
-
-/*
- * Read the file header; return image size and component count.
- */
-
-METHODDEF(void)
-start_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
- ppm_source_ptr source = (ppm_source_ptr) sinfo;
- int c;
- unsigned int w, h, maxval;
- boolean need_iobuffer, use_raw_buffer, need_rescale;
-
- if (getc(source->pub.input_file) != 'P')
- ERREXIT(cinfo, JERR_PPM_NOT);
-
- c = getc(source->pub.input_file); /* subformat discriminator character */
-
- /* detect unsupported variants (ie, PBM) before trying to read header */
- switch (c) {
- case '2': /* it's a text-format PGM file */
- case '3': /* it's a text-format PPM file */
- case '5': /* it's a raw-format PGM file */
- case '6': /* it's a raw-format PPM file */
- break;
- default:
- ERREXIT(cinfo, JERR_PPM_NOT);
- break;
- }
-
- /* fetch the remaining header info */
- w = read_pbm_integer(cinfo, source->pub.input_file);
- h = read_pbm_integer(cinfo, source->pub.input_file);
- maxval = read_pbm_integer(cinfo, source->pub.input_file);
-
- if (w <= 0 || h <= 0 || maxval <= 0) /* error check */
- ERREXIT(cinfo, JERR_PPM_NOT);
-
- cinfo->data_precision = BITS_IN_JSAMPLE; /* we always rescale data to this */
- cinfo->image_width = (JDIMENSION) w;
- cinfo->image_height = (JDIMENSION) h;
-
- /* initialize flags to most common settings */
- need_iobuffer = TRUE; /* do we need an I/O buffer? */
- use_raw_buffer = FALSE; /* do we map input buffer onto I/O buffer? */
- need_rescale = TRUE; /* do we need a rescale array? */
-
- switch (c) {
- case '2': /* it's a text-format PGM file */
- cinfo->input_components = 1;
- cinfo->in_color_space = JCS_GRAYSCALE;
- TRACEMS2(cinfo, 1, JTRC_PGM_TEXT, w, h);
- source->pub.get_pixel_rows = get_text_gray_row;
- need_iobuffer = FALSE;
- break;
-
- case '3': /* it's a text-format PPM file */
- cinfo->input_components = 3;
- cinfo->in_color_space = JCS_RGB;
- TRACEMS2(cinfo, 1, JTRC_PPM_TEXT, w, h);
- source->pub.get_pixel_rows = get_text_rgb_row;
- need_iobuffer = FALSE;
- break;
-
- case '5': /* it's a raw-format PGM file */
- cinfo->input_components = 1;
- cinfo->in_color_space = JCS_GRAYSCALE;
- TRACEMS2(cinfo, 1, JTRC_PGM, w, h);
- if (maxval > 255) {
- source->pub.get_pixel_rows = get_word_gray_row;
- } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) {
- source->pub.get_pixel_rows = get_raw_row;
- use_raw_buffer = TRUE;
- need_rescale = FALSE;
- } else {
- source->pub.get_pixel_rows = get_scaled_gray_row;
- }
- break;
-
- case '6': /* it's a raw-format PPM file */
- cinfo->input_components = 3;
- cinfo->in_color_space = JCS_RGB;
- TRACEMS2(cinfo, 1, JTRC_PPM, w, h);
- if (maxval > 255) {
- source->pub.get_pixel_rows = get_word_rgb_row;
- } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) {
- source->pub.get_pixel_rows = get_raw_row;
- use_raw_buffer = TRUE;
- need_rescale = FALSE;
- } else {
- source->pub.get_pixel_rows = get_scaled_rgb_row;
- }
- break;
- }
-
- /* Allocate space for I/O buffer: 1 or 3 bytes or words/pixel. */
- if (need_iobuffer) {
- source->buffer_width = (size_t) w * cinfo->input_components *
- ((maxval<=255) ? SIZEOF(U_CHAR) : (2*SIZEOF(U_CHAR)));
- source->iobuffer = (U_CHAR *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- source->buffer_width);
- }
-
- /* Create compressor input buffer. */
- if (use_raw_buffer) {
- /* For unscaled raw-input case, we can just map it onto the I/O buffer. */
- /* Synthesize a JSAMPARRAY pointer structure */
- /* Cast here implies near->far pointer conversion on PCs */
- source->pixrow = (JSAMPROW) source->iobuffer;
- source->pub.buffer = & source->pixrow;
- source->pub.buffer_height = 1;
- } else {
- /* Need to translate anyway, so make a separate sample buffer. */
- source->pub.buffer = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (JDIMENSION) w * cinfo->input_components, (JDIMENSION) 1);
- source->pub.buffer_height = 1;
- }
-
- /* Compute the rescaling array if required. */
- if (need_rescale) {
- INT32 val, half_maxval;
-
- /* On 16-bit-int machines we have to be careful of maxval = 65535 */
- source->rescale = (JSAMPLE *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (size_t) (((long) maxval + 1L) * SIZEOF(JSAMPLE)));
- half_maxval = maxval / 2;
- for (val = 0; val <= (INT32) maxval; val++) {
- /* The multiplication here must be done in 32 bits to avoid overflow */
- source->rescale[val] = (JSAMPLE) ((val*MAXJSAMPLE + half_maxval)/maxval);
- }
- }
-}
-
-
-/*
- * Finish up at the end of the file.
- */
-
-METHODDEF(void)
-finish_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
- /* no work */
-}
-
-
-/*
- * The module selection routine for PPM format input.
- */
-
-GLOBAL(cjpeg_source_ptr)
-jinit_read_ppm (j_compress_ptr cinfo)
-{
- ppm_source_ptr source;
-
- /* Create module interface object */
- source = (ppm_source_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(ppm_source_struct));
- /* Fill in method ptrs, except get_pixel_rows which start_input sets */
- source->pub.start_input = start_input_ppm;
- source->pub.finish_input = finish_input_ppm;
-
- return (cjpeg_source_ptr) source;
-}
-
-#endif /* PPM_SUPPORTED */
diff --git a/libjpegtwrp/rdrle.c b/libjpegtwrp/rdrle.c
deleted file mode 100644
index 542bc3749..000000000
--- a/libjpegtwrp/rdrle.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * rdrle.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to read input images in Utah RLE format.
- * The Utah Raster Toolkit library is required (version 3.1 or later).
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications. As they stand, they assume input from
- * an ordinary stdio stream. They further assume that reading begins
- * at the start of the file; start_input may need work if the
- * user interface has already read some data (e.g., to determine that
- * the file is indeed RLE format).
- *
- * Based on code contributed by Mike Lijewski,
- * with updates from Robert Hutchinson.
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-
-#ifdef RLE_SUPPORTED
-
-/* rle.h is provided by the Utah Raster Toolkit. */
-
-#include <rle.h>
-
-/*
- * We assume that JSAMPLE has the same representation as rle_pixel,
- * to wit, "unsigned char". Hence we can't cope with 12- or 16-bit samples.
- */
-
-#if BITS_IN_JSAMPLE != 8
- Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
-#endif
-
-/*
- * We support the following types of RLE files:
- *
- * GRAYSCALE - 8 bits, no colormap
- * MAPPEDGRAY - 8 bits, 1 channel colomap
- * PSEUDOCOLOR - 8 bits, 3 channel colormap
- * TRUECOLOR - 24 bits, 3 channel colormap
- * DIRECTCOLOR - 24 bits, no colormap
- *
- * For now, we ignore any alpha channel in the image.
- */
-
-typedef enum
- { GRAYSCALE, MAPPEDGRAY, PSEUDOCOLOR, TRUECOLOR, DIRECTCOLOR } rle_kind;
-
-
-/*
- * Since RLE stores scanlines bottom-to-top, we have to invert the image
- * to conform to JPEG's top-to-bottom order. To do this, we read the
- * incoming image into a virtual array on the first get_pixel_rows call,
- * then fetch the required row from the virtual array on subsequent calls.
- */
-
-typedef struct _rle_source_struct * rle_source_ptr;
-
-typedef struct _rle_source_struct {
- struct cjpeg_source_struct pub; /* public fields */
-
- rle_kind visual; /* actual type of input file */
- jvirt_sarray_ptr image; /* virtual array to hold the image */
- JDIMENSION row; /* current row # in the virtual array */
- rle_hdr header; /* Input file information */
- rle_pixel** rle_row; /* holds a row returned by rle_getrow() */
-
-} rle_source_struct;
-
-
-/*
- * Read the file header; return image size and component count.
- */
-
-METHODDEF(void)
-start_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
- rle_source_ptr source = (rle_source_ptr) sinfo;
- JDIMENSION width, height;
-#ifdef PROGRESS_REPORT
- cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-#endif
-
- /* Use RLE library routine to get the header info */
- source->header = *rle_hdr_init(NULL);
- source->header.rle_file = source->pub.input_file;
- switch (rle_get_setup(&(source->header))) {
- case RLE_SUCCESS:
- /* A-OK */
- break;
- case RLE_NOT_RLE:
- ERREXIT(cinfo, JERR_RLE_NOT);
- break;
- case RLE_NO_SPACE:
- ERREXIT(cinfo, JERR_RLE_MEM);
- break;
- case RLE_EMPTY:
- ERREXIT(cinfo, JERR_RLE_EMPTY);
- break;
- case RLE_EOF:
- ERREXIT(cinfo, JERR_RLE_EOF);
- break;
- default:
- ERREXIT(cinfo, JERR_RLE_BADERROR);
- break;
- }
-
- /* Figure out what we have, set private vars and return values accordingly */
-
- width = source->header.xmax - source->header.xmin + 1;
- height = source->header.ymax - source->header.ymin + 1;
- source->header.xmin = 0; /* realign horizontally */
- source->header.xmax = width-1;
-
- cinfo->image_width = width;
- cinfo->image_height = height;
- cinfo->data_precision = 8; /* we can only handle 8 bit data */
-
- if (source->header.ncolors == 1 && source->header.ncmap == 0) {
- source->visual = GRAYSCALE;
- TRACEMS2(cinfo, 1, JTRC_RLE_GRAY, width, height);
- } else if (source->header.ncolors == 1 && source->header.ncmap == 1) {
- source->visual = MAPPEDGRAY;
- TRACEMS3(cinfo, 1, JTRC_RLE_MAPGRAY, width, height,
- 1 << source->header.cmaplen);
- } else if (source->header.ncolors == 1 && source->header.ncmap == 3) {
- source->visual = PSEUDOCOLOR;
- TRACEMS3(cinfo, 1, JTRC_RLE_MAPPED, width, height,
- 1 << source->header.cmaplen);
- } else if (source->header.ncolors == 3 && source->header.ncmap == 3) {
- source->visual = TRUECOLOR;
- TRACEMS3(cinfo, 1, JTRC_RLE_FULLMAP, width, height,
- 1 << source->header.cmaplen);
- } else if (source->header.ncolors == 3 && source->header.ncmap == 0) {
- source->visual = DIRECTCOLOR;
- TRACEMS2(cinfo, 1, JTRC_RLE, width, height);
- } else
- ERREXIT(cinfo, JERR_RLE_UNSUPPORTED);
-
- if (source->visual == GRAYSCALE || source->visual == MAPPEDGRAY) {
- cinfo->in_color_space = JCS_GRAYSCALE;
- cinfo->input_components = 1;
- } else {
- cinfo->in_color_space = JCS_RGB;
- cinfo->input_components = 3;
- }
-
- /*
- * A place to hold each scanline while it's converted.
- * (GRAYSCALE scanlines don't need converting)
- */
- if (source->visual != GRAYSCALE) {
- source->rle_row = (rle_pixel**) (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (JDIMENSION) width, (JDIMENSION) cinfo->input_components);
- }
-
- /* request a virtual array to hold the image */
- source->image = (*cinfo->mem->request_virt_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
- (JDIMENSION) (width * source->header.ncolors),
- (JDIMENSION) height, (JDIMENSION) 1);
-
-#ifdef PROGRESS_REPORT
- if (progress != NULL) {
- /* count file input as separate pass */
- progress->total_extra_passes++;
- }
-#endif
-
- source->pub.buffer_height = 1;
-}
-
-
-/*
- * Read one row of pixels.
- * Called only after load_image has read the image into the virtual array.
- * Used for GRAYSCALE, MAPPEDGRAY, TRUECOLOR, and DIRECTCOLOR images.
- */
-
-METHODDEF(JDIMENSION)
-get_rle_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
- rle_source_ptr source = (rle_source_ptr) sinfo;
-
- source->row--;
- source->pub.buffer = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE);
-
- return 1;
-}
-
-/*
- * Read one row of pixels.
- * Called only after load_image has read the image into the virtual array.
- * Used for PSEUDOCOLOR images.
- */
-
-METHODDEF(JDIMENSION)
-get_pseudocolor_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
- rle_source_ptr source = (rle_source_ptr) sinfo;
- JSAMPROW src_row, dest_row;
- JDIMENSION col;
- rle_map *colormap;
- int val;
-
- colormap = source->header.cmap;
- dest_row = source->pub.buffer[0];
- source->row--;
- src_row = * (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE);
-
- for (col = cinfo->image_width; col > 0; col--) {
- val = GETJSAMPLE(*src_row++);
- *dest_row++ = (JSAMPLE) (colormap[val ] >> 8);
- *dest_row++ = (JSAMPLE) (colormap[val + 256] >> 8);
- *dest_row++ = (JSAMPLE) (colormap[val + 512] >> 8);
- }
-
- return 1;
-}
-
-
-/*
- * Load the image into a virtual array. We have to do this because RLE
- * files start at the lower left while the JPEG standard has them starting
- * in the upper left. This is called the first time we want to get a row
- * of input. What we do is load the RLE data into the array and then call
- * the appropriate routine to read one row from the array. Before returning,
- * we set source->pub.get_pixel_rows so that subsequent calls go straight to
- * the appropriate row-reading routine.
- */
-
-METHODDEF(JDIMENSION)
-load_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
- rle_source_ptr source = (rle_source_ptr) sinfo;
- JDIMENSION row, col;
- JSAMPROW scanline, red_ptr, green_ptr, blue_ptr;
- rle_pixel **rle_row;
- rle_map *colormap;
- char channel;
-#ifdef PROGRESS_REPORT
- cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-#endif
-
- colormap = source->header.cmap;
- rle_row = source->rle_row;
-
- /* Read the RLE data into our virtual array.
- * We assume here that (a) rle_pixel is represented the same as JSAMPLE,
- * and (b) we are not on a machine where FAR pointers differ from regular.
- */
- RLE_CLR_BIT(source->header, RLE_ALPHA); /* don't read the alpha channel */
-
-#ifdef PROGRESS_REPORT
- if (progress != NULL) {
- progress->pub.pass_limit = cinfo->image_height;
- progress->pub.pass_counter = 0;
- (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
- }
-#endif
-
- switch (source->visual) {
-
- case GRAYSCALE:
- case PSEUDOCOLOR:
- for (row = 0; row < cinfo->image_height; row++) {
- rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE);
- rle_getrow(&source->header, rle_row);
-#ifdef PROGRESS_REPORT
- if (progress != NULL) {
- progress->pub.pass_counter++;
- (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
- }
-#endif
- }
- break;
-
- case MAPPEDGRAY:
- case TRUECOLOR:
- for (row = 0; row < cinfo->image_height; row++) {
- scanline = * (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE);
- rle_row = source->rle_row;
- rle_getrow(&source->header, rle_row);
-
- for (col = 0; col < cinfo->image_width; col++) {
- for (channel = 0; channel < source->header.ncolors; channel++) {
- *scanline++ = (JSAMPLE)
- (colormap[GETJSAMPLE(rle_row[channel][col]) + 256 * channel] >> 8);
- }
- }
-
-#ifdef PROGRESS_REPORT
- if (progress != NULL) {
- progress->pub.pass_counter++;
- (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
- }
-#endif
- }
- break;
-
- case DIRECTCOLOR:
- for (row = 0; row < cinfo->image_height; row++) {
- scanline = * (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE);
- rle_getrow(&source->header, rle_row);
-
- red_ptr = rle_row[0];
- green_ptr = rle_row[1];
- blue_ptr = rle_row[2];
-
- for (col = cinfo->image_width; col > 0; col--) {
- *scanline++ = *red_ptr++;
- *scanline++ = *green_ptr++;
- *scanline++ = *blue_ptr++;
- }
-
-#ifdef PROGRESS_REPORT
- if (progress != NULL) {
- progress->pub.pass_counter++;
- (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
- }
-#endif
- }
- }
-
-#ifdef PROGRESS_REPORT
- if (progress != NULL)
- progress->completed_extra_passes++;
-#endif
-
- /* Set up to call proper row-extraction routine in future */
- if (source->visual == PSEUDOCOLOR) {
- source->pub.buffer = source->rle_row;
- source->pub.get_pixel_rows = get_pseudocolor_row;
- } else {
- source->pub.get_pixel_rows = get_rle_row;
- }
- source->row = cinfo->image_height;
-
- /* And fetch the topmost (bottommost) row */
- return (*source->pub.get_pixel_rows) (cinfo, sinfo);
-}
-
-
-/*
- * Finish up at the end of the file.
- */
-
-METHODDEF(void)
-finish_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
- /* no work */
-}
-
-
-/*
- * The module selection routine for RLE format input.
- */
-
-GLOBAL(cjpeg_source_ptr)
-jinit_read_rle (j_compress_ptr cinfo)
-{
- rle_source_ptr source;
-
- /* Create module interface object */
- source = (rle_source_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(rle_source_struct));
- /* Fill in method ptrs */
- source->pub.start_input = start_input_rle;
- source->pub.finish_input = finish_input_rle;
- source->pub.get_pixel_rows = load_image;
-
- return (cjpeg_source_ptr) source;
-}
-
-#endif /* RLE_SUPPORTED */
diff --git a/libjpegtwrp/rdswitch.c b/libjpegtwrp/rdswitch.c
deleted file mode 100644
index 4f4bb4f58..000000000
--- a/libjpegtwrp/rdswitch.c
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * rdswitch.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to process some of cjpeg's more complicated
- * command-line switches. Switches processed here are:
- * -qtables file Read quantization tables from text file
- * -scans file Read scan script from text file
- * -qslots N[,N,...] Set component quantization table selectors
- * -sample HxV[,HxV,...] Set component sampling factors
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-#include <ctype.h> /* to declare isdigit(), isspace() */
-
-
-LOCAL(int)
-text_getc (FILE * file)
-/* Read next char, skipping over any comments (# to end of line) */
-/* A comment/newline sequence is returned as a newline */
-{
- register int ch;
-
- ch = getc(file);
- if (ch == '#') {
- do {
- ch = getc(file);
- } while (ch != '\n' && ch != EOF);
- }
- return ch;
-}
-
-
-LOCAL(boolean)
-read_text_integer (FILE * file, long * result, int * termchar)
-/* Read an unsigned decimal integer from a file, store it in result */
-/* Reads one trailing character after the integer; returns it in termchar */
-{
- register int ch;
- register long val;
-
- /* Skip any leading whitespace, detect EOF */
- do {
- ch = text_getc(file);
- if (ch == EOF) {
- *termchar = ch;
- return FALSE;
- }
- } while (isspace(ch));
-
- if (! isdigit(ch)) {
- *termchar = ch;
- return FALSE;
- }
-
- val = ch - '0';
- while ((ch = text_getc(file)) != EOF) {
- if (! isdigit(ch))
- break;
- val *= 10;
- val += ch - '0';
- }
- *result = val;
- *termchar = ch;
- return TRUE;
-}
-
-
-GLOBAL(boolean)
-read_quant_tables (j_compress_ptr cinfo, char * filename,
- int scale_factor, boolean force_baseline)
-/* Read a set of quantization tables from the specified file.
- * The file is plain ASCII text: decimal numbers with whitespace between.
- * Comments preceded by '#' may be included in the file.
- * There may be one to NUM_QUANT_TBLS tables in the file, each of 64 values.
- * The tables are implicitly numbered 0,1,etc.
- * NOTE: does not affect the qslots mapping, which will default to selecting
- * table 0 for luminance (or primary) components, 1 for chrominance components.
- * You must use -qslots if you want a different component->table mapping.
- */
-{
- FILE * fp;
- int tblno, i, termchar;
- long val;
- unsigned int table[DCTSIZE2];
-
- if ((fp = fopen(filename, "r")) == NULL) {
- fprintf(stderr, "Can't open table file %s\n", filename);
- return FALSE;
- }
- tblno = 0;
-
- while (read_text_integer(fp, &val, &termchar)) { /* read 1st element of table */
- if (tblno >= NUM_QUANT_TBLS) {
- fprintf(stderr, "Too many tables in file %s\n", filename);
- fclose(fp);
- return FALSE;
- }
- table[0] = (unsigned int) val;
- for (i = 1; i < DCTSIZE2; i++) {
- if (! read_text_integer(fp, &val, &termchar)) {
- fprintf(stderr, "Invalid table data in file %s\n", filename);
- fclose(fp);
- return FALSE;
- }
- table[i] = (unsigned int) val;
- }
- jpeg_add_quant_table(cinfo, tblno, table, scale_factor, force_baseline);
- tblno++;
- }
-
- if (termchar != EOF) {
- fprintf(stderr, "Non-numeric data in file %s\n", filename);
- fclose(fp);
- return FALSE;
- }
-
- fclose(fp);
- return TRUE;
-}
-
-
-#ifdef C_MULTISCAN_FILES_SUPPORTED
-
-LOCAL(boolean)
-read_scan_integer (FILE * file, long * result, int * termchar)
-/* Variant of read_text_integer that always looks for a non-space termchar;
- * this simplifies parsing of punctuation in scan scripts.
- */
-{
- register int ch;
-
- if (! read_text_integer(file, result, termchar))
- return FALSE;
- ch = *termchar;
- while (ch != EOF && isspace(ch))
- ch = text_getc(file);
- if (isdigit(ch)) { /* oops, put it back */
- if (ungetc(ch, file) == EOF)
- return FALSE;
- ch = ' ';
- } else {
- /* Any separators other than ';' and ':' are ignored;
- * this allows user to insert commas, etc, if desired.
- */
- if (ch != EOF && ch != ';' && ch != ':')
- ch = ' ';
- }
- *termchar = ch;
- return TRUE;
-}
-
-
-GLOBAL(boolean)
-read_scan_script (j_compress_ptr cinfo, char * filename)
-/* Read a scan script from the specified text file.
- * Each entry in the file defines one scan to be emitted.
- * Entries are separated by semicolons ';'.
- * An entry contains one to four component indexes,
- * optionally followed by a colon ':' and four progressive-JPEG parameters.
- * The component indexes denote which component(s) are to be transmitted
- * in the current scan. The first component has index 0.
- * Sequential JPEG is used if the progressive-JPEG parameters are omitted.
- * The file is free format text: any whitespace may appear between numbers
- * and the ':' and ';' punctuation marks. Also, other punctuation (such
- * as commas or dashes) can be placed between numbers if desired.
- * Comments preceded by '#' may be included in the file.
- * Note: we do very little validity checking here;
- * jcmaster.c will validate the script parameters.
- */
-{
- FILE * fp;
- int scanno, ncomps, termchar;
- long val;
- jpeg_scan_info * scanptr;
-#define MAX_SCANS 100 /* quite arbitrary limit */
- jpeg_scan_info scans[MAX_SCANS];
-
- if ((fp = fopen(filename, "r")) == NULL) {
- fprintf(stderr, "Can't open scan definition file %s\n", filename);
- return FALSE;
- }
- scanptr = scans;
- scanno = 0;
-
- while (read_scan_integer(fp, &val, &termchar)) {
- if (scanno >= MAX_SCANS) {
- fprintf(stderr, "Too many scans defined in file %s\n", filename);
- fclose(fp);
- return FALSE;
- }
- scanptr->component_index[0] = (int) val;
- ncomps = 1;
- while (termchar == ' ') {
- if (ncomps >= MAX_COMPS_IN_SCAN) {
- fprintf(stderr, "Too many components in one scan in file %s\n",
- filename);
- fclose(fp);
- return FALSE;
- }
- if (! read_scan_integer(fp, &val, &termchar))
- goto bogus;
- scanptr->component_index[ncomps] = (int) val;
- ncomps++;
- }
- scanptr->comps_in_scan = ncomps;
- if (termchar == ':') {
- if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ')
- goto bogus;
- scanptr->Ss = (int) val;
- if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ')
- goto bogus;
- scanptr->Se = (int) val;
- if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ')
- goto bogus;
- scanptr->Ah = (int) val;
- if (! read_scan_integer(fp, &val, &termchar))
- goto bogus;
- scanptr->Al = (int) val;
- } else {
- /* set non-progressive parameters */
- scanptr->Ss = 0;
- scanptr->Se = DCTSIZE2-1;
- scanptr->Ah = 0;
- scanptr->Al = 0;
- }
- if (termchar != ';' && termchar != EOF) {
-bogus:
- fprintf(stderr, "Invalid scan entry format in file %s\n", filename);
- fclose(fp);
- return FALSE;
- }
- scanptr++, scanno++;
- }
-
- if (termchar != EOF) {
- fprintf(stderr, "Non-numeric data in file %s\n", filename);
- fclose(fp);
- return FALSE;
- }
-
- if (scanno > 0) {
- /* Stash completed scan list in cinfo structure.
- * NOTE: for cjpeg's use, JPOOL_IMAGE is the right lifetime for this data,
- * but if you want to compress multiple images you'd want JPOOL_PERMANENT.
- */
- scanptr = (jpeg_scan_info *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- scanno * SIZEOF(jpeg_scan_info));
- MEMCOPY(scanptr, scans, scanno * SIZEOF(jpeg_scan_info));
- cinfo->scan_info = scanptr;
- cinfo->num_scans = scanno;
- }
-
- fclose(fp);
- return TRUE;
-}
-
-#endif /* C_MULTISCAN_FILES_SUPPORTED */
-
-
-GLOBAL(boolean)
-set_quant_slots (j_compress_ptr cinfo, char *arg)
-/* Process a quantization-table-selectors parameter string, of the form
- * N[,N,...]
- * If there are more components than parameters, the last value is replicated.
- */
-{
- int val = 0; /* default table # */
- int ci;
- char ch;
-
- for (ci = 0; ci < MAX_COMPONENTS; ci++) {
- if (*arg) {
- ch = ','; /* if not set by sscanf, will be ',' */
- if (sscanf(arg, "%d%c", &val, &ch) < 1)
- return FALSE;
- if (ch != ',') /* syntax check */
- return FALSE;
- if (val < 0 || val >= NUM_QUANT_TBLS) {
- fprintf(stderr, "JPEG quantization tables are numbered 0..%d\n",
- NUM_QUANT_TBLS-1);
- return FALSE;
- }
- cinfo->comp_info[ci].quant_tbl_no = val;
- while (*arg && *arg++ != ',') /* advance to next segment of arg string */
- ;
- } else {
- /* reached end of parameter, set remaining components to last table */
- cinfo->comp_info[ci].quant_tbl_no = val;
- }
- }
- return TRUE;
-}
-
-
-GLOBAL(boolean)
-set_sample_factors (j_compress_ptr cinfo, char *arg)
-/* Process a sample-factors parameter string, of the form
- * HxV[,HxV,...]
- * If there are more components than parameters, "1x1" is assumed for the rest.
- */
-{
- int ci, val1, val2;
- char ch1, ch2;
-
- for (ci = 0; ci < MAX_COMPONENTS; ci++) {
- if (*arg) {
- ch2 = ','; /* if not set by sscanf, will be ',' */
- if (sscanf(arg, "%d%c%d%c", &val1, &ch1, &val2, &ch2) < 3)
- return FALSE;
- if ((ch1 != 'x' && ch1 != 'X') || ch2 != ',') /* syntax check */
- return FALSE;
- if (val1 <= 0 || val1 > 4 || val2 <= 0 || val2 > 4) {
- fprintf(stderr, "JPEG sampling factors must be 1..4\n");
- return FALSE;
- }
- cinfo->comp_info[ci].h_samp_factor = val1;
- cinfo->comp_info[ci].v_samp_factor = val2;
- while (*arg && *arg++ != ',') /* advance to next segment of arg string */
- ;
- } else {
- /* reached end of parameter, set remaining components to 1x1 sampling */
- cinfo->comp_info[ci].h_samp_factor = 1;
- cinfo->comp_info[ci].v_samp_factor = 1;
- }
- }
- return TRUE;
-}
diff --git a/libjpegtwrp/rdtarga.c b/libjpegtwrp/rdtarga.c
deleted file mode 100644
index 4c2cd2673..000000000
--- a/libjpegtwrp/rdtarga.c
+++ /dev/null
@@ -1,500 +0,0 @@
-/*
- * rdtarga.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to read input images in Targa format.
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications. As they stand, they assume input from
- * an ordinary stdio stream. They further assume that reading begins
- * at the start of the file; start_input may need work if the
- * user interface has already read some data (e.g., to determine that
- * the file is indeed Targa format).
- *
- * Based on code contributed by Lee Daniel Crocker.
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-
-#ifdef TARGA_SUPPORTED
-
-
-/* Macros to deal with unsigned chars as efficiently as compiler allows */
-
-#ifdef HAVE_UNSIGNED_CHAR
-typedef unsigned char U_CHAR;
-#define UCH(x) ((int) (x))
-#else /* !HAVE_UNSIGNED_CHAR */
-#ifdef CHAR_IS_UNSIGNED
-typedef char U_CHAR;
-#define UCH(x) ((int) (x))
-#else
-typedef char U_CHAR;
-#define UCH(x) ((int) (x) & 0xFF)
-#endif
-#endif /* HAVE_UNSIGNED_CHAR */
-
-
-#define ReadOK(file,buffer,len) (JFREAD(file,buffer,len) == ((size_t) (len)))
-
-
-/* Private version of data source object */
-
-typedef struct _tga_source_struct * tga_source_ptr;
-
-typedef struct _tga_source_struct {
- struct cjpeg_source_struct pub; /* public fields */
-
- j_compress_ptr cinfo; /* back link saves passing separate parm */
-
- JSAMPARRAY colormap; /* Targa colormap (converted to my format) */
-
- jvirt_sarray_ptr whole_image; /* Needed if funny input row order */
- JDIMENSION current_row; /* Current logical row number to read */
-
- /* Pointer to routine to extract next Targa pixel from input file */
- JMETHOD(void, read_pixel, (tga_source_ptr sinfo));
-
- /* Result of read_pixel is delivered here: */
- U_CHAR tga_pixel[4];
-
- int pixel_size; /* Bytes per Targa pixel (1 to 4) */
-
- /* State info for reading RLE-coded pixels; both counts must be init to 0 */
- int block_count; /* # of pixels remaining in RLE block */
- int dup_pixel_count; /* # of times to duplicate previous pixel */
-
- /* This saves the correct pixel-row-expansion method for preload_image */
- JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo,
- cjpeg_source_ptr sinfo));
-} tga_source_struct;
-
-
-/* For expanding 5-bit pixel values to 8-bit with best rounding */
-
-static const UINT8 c5to8bits[32] = {
- 0, 8, 16, 25, 33, 41, 49, 58,
- 66, 74, 82, 90, 99, 107, 115, 123,
- 132, 140, 148, 156, 165, 173, 181, 189,
- 197, 206, 214, 222, 230, 239, 247, 255
-};
-
-
-
-LOCAL(int)
-read_byte (tga_source_ptr sinfo)
-/* Read next byte from Targa file */
-{
- register FILE *infile = sinfo->pub.input_file;
- register int c;
-
- if ((c = getc(infile)) == EOF)
- ERREXIT(sinfo->cinfo, JERR_INPUT_EOF);
- return c;
-}
-
-
-LOCAL(void)
-read_colormap (tga_source_ptr sinfo, int cmaplen, int mapentrysize)
-/* Read the colormap from a Targa file */
-{
- int i;
-
- /* Presently only handles 24-bit BGR format */
- if (mapentrysize != 24)
- ERREXIT(sinfo->cinfo, JERR_TGA_BADCMAP);
-
- for (i = 0; i < cmaplen; i++) {
- sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo);
- sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo);
- sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo);
- }
-}
-
-
-/*
- * read_pixel methods: get a single pixel from Targa file into tga_pixel[]
- */
-
-METHODDEF(void)
-read_non_rle_pixel (tga_source_ptr sinfo)
-/* Read one Targa pixel from the input file; no RLE expansion */
-{
- register FILE *infile = sinfo->pub.input_file;
- register int i;
-
- for (i = 0; i < sinfo->pixel_size; i++) {
- sinfo->tga_pixel[i] = (U_CHAR) getc(infile);
- }
-}
-
-
-METHODDEF(void)
-read_rle_pixel (tga_source_ptr sinfo)
-/* Read one Targa pixel from the input file, expanding RLE data as needed */
-{
- register FILE *infile = sinfo->pub.input_file;
- register int i;
-
- /* Duplicate previously read pixel? */
- if (sinfo->dup_pixel_count > 0) {
- sinfo->dup_pixel_count--;
- return;
- }
-
- /* Time to read RLE block header? */
- if (--sinfo->block_count < 0) { /* decrement pixels remaining in block */
- i = read_byte(sinfo);
- if (i & 0x80) { /* Start of duplicate-pixel block? */
- sinfo->dup_pixel_count = i & 0x7F; /* number of dups after this one */
- sinfo->block_count = 0; /* then read new block header */
- } else {
- sinfo->block_count = i & 0x7F; /* number of pixels after this one */
- }
- }
-
- /* Read next pixel */
- for (i = 0; i < sinfo->pixel_size; i++) {
- sinfo->tga_pixel[i] = (U_CHAR) getc(infile);
- }
-}
-
-
-/*
- * Read one row of pixels.
- *
- * We provide several different versions depending on input file format.
- */
-
-
-METHODDEF(JDIMENSION)
-get_8bit_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading 8-bit grayscale pixels */
-{
- tga_source_ptr source = (tga_source_ptr) sinfo;
- register JSAMPROW ptr;
- register JDIMENSION col;
-
- ptr = source->pub.buffer[0];
- for (col = cinfo->image_width; col > 0; col--) {
- (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
- *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]);
- }
- return 1;
-}
-
-METHODDEF(JDIMENSION)
-get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading 8-bit colormap indexes */
-{
- tga_source_ptr source = (tga_source_ptr) sinfo;
- register int t;
- register JSAMPROW ptr;
- register JDIMENSION col;
- register JSAMPARRAY colormap = source->colormap;
-
- ptr = source->pub.buffer[0];
- for (col = cinfo->image_width; col > 0; col--) {
- (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
- t = UCH(source->tga_pixel[0]);
- *ptr++ = colormap[0][t];
- *ptr++ = colormap[1][t];
- *ptr++ = colormap[2][t];
- }
- return 1;
-}
-
-METHODDEF(JDIMENSION)
-get_16bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading 16-bit pixels */
-{
- tga_source_ptr source = (tga_source_ptr) sinfo;
- register int t;
- register JSAMPROW ptr;
- register JDIMENSION col;
-
- ptr = source->pub.buffer[0];
- for (col = cinfo->image_width; col > 0; col--) {
- (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
- t = UCH(source->tga_pixel[0]);
- t += UCH(source->tga_pixel[1]) << 8;
- /* We expand 5 bit data to 8 bit sample width.
- * The format of the 16-bit (LSB first) input word is
- * xRRRRRGGGGGBBBBB
- */
- ptr[2] = (JSAMPLE) c5to8bits[t & 0x1F];
- t >>= 5;
- ptr[1] = (JSAMPLE) c5to8bits[t & 0x1F];
- t >>= 5;
- ptr[0] = (JSAMPLE) c5to8bits[t & 0x1F];
- ptr += 3;
- }
- return 1;
-}
-
-METHODDEF(JDIMENSION)
-get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading 24-bit pixels */
-{
- tga_source_ptr source = (tga_source_ptr) sinfo;
- register JSAMPROW ptr;
- register JDIMENSION col;
-
- ptr = source->pub.buffer[0];
- for (col = cinfo->image_width; col > 0; col--) {
- (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
- *ptr++ = (JSAMPLE) UCH(source->tga_pixel[2]); /* change BGR to RGB order */
- *ptr++ = (JSAMPLE) UCH(source->tga_pixel[1]);
- *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]);
- }
- return 1;
-}
-
-/*
- * Targa also defines a 32-bit pixel format with order B,G,R,A.
- * We presently ignore the attribute byte, so the code for reading
- * these pixels is identical to the 24-bit routine above.
- * This works because the actual pixel length is only known to read_pixel.
- */
-
-#define get_32bit_row get_24bit_row
-
-
-/*
- * This method is for re-reading the input data in standard top-down
- * row order. The entire image has already been read into whole_image
- * with proper conversion of pixel format, but it's in a funny row order.
- */
-
-METHODDEF(JDIMENSION)
-get_memory_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
- tga_source_ptr source = (tga_source_ptr) sinfo;
- JDIMENSION source_row;
-
- /* Compute row of source that maps to current_row of normal order */
- /* For now, assume image is bottom-up and not interlaced. */
- /* NEEDS WORK to support interlaced images! */
- source_row = cinfo->image_height - source->current_row - 1;
-
- /* Fetch that row from virtual array */
- source->pub.buffer = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, source->whole_image,
- source_row, (JDIMENSION) 1, FALSE);
-
- source->current_row++;
- return 1;
-}
-
-
-/*
- * This method loads the image into whole_image during the first call on
- * get_pixel_rows. The get_pixel_rows pointer is then adjusted to call
- * get_memory_row on subsequent calls.
- */
-
-METHODDEF(JDIMENSION)
-preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
- tga_source_ptr source = (tga_source_ptr) sinfo;
- JDIMENSION row;
- cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-
- /* Read the data into a virtual array in input-file row order. */
- for (row = 0; row < cinfo->image_height; row++) {
- if (progress != NULL) {
- progress->pub.pass_counter = (long) row;
- progress->pub.pass_limit = (long) cinfo->image_height;
- (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
- }
- source->pub.buffer = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, source->whole_image, row, (JDIMENSION) 1, TRUE);
- (*source->get_pixel_rows) (cinfo, sinfo);
- }
- if (progress != NULL)
- progress->completed_extra_passes++;
-
- /* Set up to read from the virtual array in unscrambled order */
- source->pub.get_pixel_rows = get_memory_row;
- source->current_row = 0;
- /* And read the first row */
- return get_memory_row(cinfo, sinfo);
-}
-
-
-/*
- * Read the file header; return image size and component count.
- */
-
-METHODDEF(void)
-start_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
- tga_source_ptr source = (tga_source_ptr) sinfo;
- U_CHAR targaheader[18];
- int idlen, cmaptype, subtype, flags, interlace_type, components;
- unsigned int width, height, maplen;
- boolean is_bottom_up;
-
-#define GET_2B(offset) ((unsigned int) UCH(targaheader[offset]) + \
- (((unsigned int) UCH(targaheader[offset+1])) << 8))
-
- if (! ReadOK(source->pub.input_file, targaheader, 18))
- ERREXIT(cinfo, JERR_INPUT_EOF);
-
- /* Pretend "15-bit" pixels are 16-bit --- we ignore attribute bit anyway */
- if (targaheader[16] == 15)
- targaheader[16] = 16;
-
- idlen = UCH(targaheader[0]);
- cmaptype = UCH(targaheader[1]);
- subtype = UCH(targaheader[2]);
- maplen = GET_2B(5);
- width = GET_2B(12);
- height = GET_2B(14);
- source->pixel_size = UCH(targaheader[16]) >> 3;
- flags = UCH(targaheader[17]); /* Image Descriptor byte */
-
- is_bottom_up = ((flags & 0x20) == 0); /* bit 5 set => top-down */
- interlace_type = flags >> 6; /* bits 6/7 are interlace code */
-
- if (cmaptype > 1 || /* cmaptype must be 0 or 1 */
- source->pixel_size < 1 || source->pixel_size > 4 ||
- (UCH(targaheader[16]) & 7) != 0 || /* bits/pixel must be multiple of 8 */
- interlace_type != 0) /* currently don't allow interlaced image */
- ERREXIT(cinfo, JERR_TGA_BADPARMS);
-
- if (subtype > 8) {
- /* It's an RLE-coded file */
- source->read_pixel = read_rle_pixel;
- source->block_count = source->dup_pixel_count = 0;
- subtype -= 8;
- } else {
- /* Non-RLE file */
- source->read_pixel = read_non_rle_pixel;
- }
-
- /* Now should have subtype 1, 2, or 3 */
- components = 3; /* until proven different */
- cinfo->in_color_space = JCS_RGB;
-
- switch (subtype) {
- case 1: /* Colormapped image */
- if (source->pixel_size == 1 && cmaptype == 1)
- source->get_pixel_rows = get_8bit_row;
- else
- ERREXIT(cinfo, JERR_TGA_BADPARMS);
- TRACEMS2(cinfo, 1, JTRC_TGA_MAPPED, width, height);
- break;
- case 2: /* RGB image */
- switch (source->pixel_size) {
- case 2:
- source->get_pixel_rows = get_16bit_row;
- break;
- case 3:
- source->get_pixel_rows = get_24bit_row;
- break;
- case 4:
- source->get_pixel_rows = get_32bit_row;
- break;
- default:
- ERREXIT(cinfo, JERR_TGA_BADPARMS);
- break;
- }
- TRACEMS2(cinfo, 1, JTRC_TGA, width, height);
- break;
- case 3: /* Grayscale image */
- components = 1;
- cinfo->in_color_space = JCS_GRAYSCALE;
- if (source->pixel_size == 1)
- source->get_pixel_rows = get_8bit_gray_row;
- else
- ERREXIT(cinfo, JERR_TGA_BADPARMS);
- TRACEMS2(cinfo, 1, JTRC_TGA_GRAY, width, height);
- break;
- default:
- ERREXIT(cinfo, JERR_TGA_BADPARMS);
- break;
- }
-
- if (is_bottom_up) {
- /* Create a virtual array to buffer the upside-down image. */
- source->whole_image = (*cinfo->mem->request_virt_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
- (JDIMENSION) width * components, (JDIMENSION) height, (JDIMENSION) 1);
- if (cinfo->progress != NULL) {
- cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
- progress->total_extra_passes++; /* count file input as separate pass */
- }
- /* source->pub.buffer will point to the virtual array. */
- source->pub.buffer_height = 1; /* in case anyone looks at it */
- source->pub.get_pixel_rows = preload_image;
- } else {
- /* Don't need a virtual array, but do need a one-row input buffer. */
- source->whole_image = NULL;
- source->pub.buffer = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (JDIMENSION) width * components, (JDIMENSION) 1);
- source->pub.buffer_height = 1;
- source->pub.get_pixel_rows = source->get_pixel_rows;
- }
-
- while (idlen--) /* Throw away ID field */
- (void) read_byte(source);
-
- if (maplen > 0) {
- if (maplen > 256 || GET_2B(3) != 0)
- ERREXIT(cinfo, JERR_TGA_BADCMAP);
- /* Allocate space to store the colormap */
- source->colormap = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, (JDIMENSION) maplen, (JDIMENSION) 3);
- /* and read it from the file */
- read_colormap(source, (int) maplen, UCH(targaheader[7]));
- } else {
- if (cmaptype) /* but you promised a cmap! */
- ERREXIT(cinfo, JERR_TGA_BADPARMS);
- source->colormap = NULL;
- }
-
- cinfo->input_components = components;
- cinfo->data_precision = 8;
- cinfo->image_width = width;
- cinfo->image_height = height;
-}
-
-
-/*
- * Finish up at the end of the file.
- */
-
-METHODDEF(void)
-finish_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
- /* no work */
-}
-
-
-/*
- * The module selection routine for Targa format input.
- */
-
-GLOBAL(cjpeg_source_ptr)
-jinit_read_targa (j_compress_ptr cinfo)
-{
- tga_source_ptr source;
-
- /* Create module interface object */
- source = (tga_source_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(tga_source_struct));
- source->cinfo = cinfo; /* make back link for subroutines */
- /* Fill in method ptrs, except get_pixel_rows which start_input sets */
- source->pub.start_input = start_input_tga;
- source->pub.finish_input = finish_input_tga;
-
- return (cjpeg_source_ptr) source;
-}
-
-#endif /* TARGA_SUPPORTED */
diff --git a/libjpegtwrp/structure.doc b/libjpegtwrp/structure.doc
deleted file mode 100644
index 51c9def7e..000000000
--- a/libjpegtwrp/structure.doc
+++ /dev/null
@@ -1,948 +0,0 @@
-IJG JPEG LIBRARY: SYSTEM ARCHITECTURE
-
-Copyright (C) 1991-1995, Thomas G. Lane.
-This file is part of the Independent JPEG Group's software.
-For conditions of distribution and use, see the accompanying README file.
-
-
-This file provides an overview of the architecture of the IJG JPEG software;
-that is, the functions of the various modules in the system and the interfaces
-between modules. For more precise details about any data structure or calling
-convention, see the include files and comments in the source code.
-
-We assume that the reader is already somewhat familiar with the JPEG standard.
-The README file includes references for learning about JPEG. The file
-libjpeg.doc describes the library from the viewpoint of an application
-programmer using the library; it's best to read that file before this one.
-Also, the file coderules.doc describes the coding style conventions we use.
-
-In this document, JPEG-specific terminology follows the JPEG standard:
- A "component" means a color channel, e.g., Red or Luminance.
- A "sample" is a single component value (i.e., one number in the image data).
- A "coefficient" is a frequency coefficient (a DCT transform output number).
- A "block" is an 8x8 group of samples or coefficients.
- An "MCU" (minimum coded unit) is an interleaved set of blocks of size
- determined by the sampling factors, or a single block in a
- noninterleaved scan.
-We do not use the terms "pixel" and "sample" interchangeably. When we say
-pixel, we mean an element of the full-size image, while a sample is an element
-of the downsampled image. Thus the number of samples may vary across
-components while the number of pixels does not. (This terminology is not used
-rigorously throughout the code, but it is used in places where confusion would
-otherwise result.)
-
-
-*** System features ***
-
-The IJG distribution contains two parts:
- * A subroutine library for JPEG compression and decompression.
- * cjpeg/djpeg, two sample applications that use the library to transform
- JFIF JPEG files to and from several other image formats.
-cjpeg/djpeg are of no great intellectual complexity: they merely add a simple
-command-line user interface and I/O routines for several uncompressed image
-formats. This document concentrates on the library itself.
-
-We desire the library to be capable of supporting all JPEG baseline, extended
-sequential, and progressive DCT processes. Hierarchical processes are not
-supported.
-
-The library does not support the lossless (spatial) JPEG process. Lossless
-JPEG shares little or no code with lossy JPEG, and would normally be used
-without the extensive pre- and post-processing provided by this library.
-We feel that lossless JPEG is better handled by a separate library.
-
-Within these limits, any set of compression parameters allowed by the JPEG
-spec should be readable for decompression. (We can be more restrictive about
-what formats we can generate.) Although the system design allows for all
-parameter values, some uncommon settings are not yet implemented and may
-never be; nonintegral sampling ratios are the prime example. Furthermore,
-we treat 8-bit vs. 12-bit data precision as a compile-time switch, not a
-run-time option, because most machines can store 8-bit pixels much more
-compactly than 12-bit.
-
-For legal reasons, JPEG arithmetic coding is not currently supported, but
-extending the library to include it would be straightforward.
-
-By itself, the library handles only interchange JPEG datastreams --- in
-particular the widely used JFIF file format. The library can be used by
-surrounding code to process interchange or abbreviated JPEG datastreams that
-are embedded in more complex file formats. (For example, libtiff uses this
-library to implement JPEG compression within the TIFF file format.)
-
-The library includes a substantial amount of code that is not covered by the
-JPEG standard but is necessary for typical applications of JPEG. These
-functions preprocess the image before JPEG compression or postprocess it after
-decompression. They include colorspace conversion, downsampling/upsampling,
-and color quantization. This code can be omitted if not needed.
-
-A wide range of quality vs. speed tradeoffs are possible in JPEG processing,
-and even more so in decompression postprocessing. The decompression library
-provides multiple implementations that cover most of the useful tradeoffs,
-ranging from very-high-quality down to fast-preview operation. On the
-compression side we have generally not provided low-quality choices, since
-compression is normally less time-critical. It should be understood that the
-low-quality modes may not meet the JPEG standard's accuracy requirements;
-nonetheless, they are useful for viewers.
-
-
-*** Portability issues ***
-
-Portability is an essential requirement for the library. The key portability
-issues that show up at the level of system architecture are:
-
-1. Memory usage. We want the code to be able to run on PC-class machines
-with limited memory. Images should therefore be processed sequentially (in
-strips), to avoid holding the whole image in memory at once. Where a
-full-image buffer is necessary, we should be able to use either virtual memory
-or temporary files.
-
-2. Near/far pointer distinction. To run efficiently on 80x86 machines, the
-code should distinguish "small" objects (kept in near data space) from
-"large" ones (kept in far data space). This is an annoying restriction, but
-fortunately it does not impact code quality for less brain-damaged machines,
-and the source code clutter turns out to be minimal with sufficient use of
-pointer typedefs.
-
-3. Data precision. We assume that "char" is at least 8 bits, "short" and
-"int" at least 16, "long" at least 32. The code will work fine with larger
-data sizes, although memory may be used inefficiently in some cases. However,
-the JPEG compressed datastream must ultimately appear on external storage as a
-sequence of 8-bit bytes if it is to conform to the standard. This may pose a
-problem on machines where char is wider than 8 bits. The library represents
-compressed data as an array of values of typedef JOCTET. If no data type
-exactly 8 bits wide is available, custom data source and data destination
-modules must be written to unpack and pack the chosen JOCTET datatype into
-8-bit external representation.
-
-
-*** System overview ***
-
-The compressor and decompressor are each divided into two main sections:
-the JPEG compressor or decompressor proper, and the preprocessing or
-postprocessing functions. The interface between these two sections is the
-image data that the official JPEG spec regards as its input or output: this
-data is in the colorspace to be used for compression, and it is downsampled
-to the sampling factors to be used. The preprocessing and postprocessing
-steps are responsible for converting a normal image representation to or from
-this form. (Those few applications that want to deal with YCbCr downsampled
-data can skip the preprocessing or postprocessing step.)
-
-Looking more closely, the compressor library contains the following main
-elements:
-
- Preprocessing:
- * Color space conversion (e.g., RGB to YCbCr).
- * Edge expansion and downsampling. Optionally, this step can do simple
- smoothing --- this is often helpful for low-quality source data.
- JPEG proper:
- * MCU assembly, DCT, quantization.
- * Entropy coding (sequential or progressive, Huffman or arithmetic).
-
-In addition to these modules we need overall control, marker generation,
-and support code (memory management & error handling). There is also a
-module responsible for physically writing the output data --- typically
-this is just an interface to fwrite(), but some applications may need to
-do something else with the data.
-
-The decompressor library contains the following main elements:
-
- JPEG proper:
- * Entropy decoding (sequential or progressive, Huffman or arithmetic).
- * Dequantization, inverse DCT, MCU disassembly.
- Postprocessing:
- * Upsampling. Optionally, this step may be able to do more general
- rescaling of the image.
- * Color space conversion (e.g., YCbCr to RGB). This step may also
- provide gamma adjustment [ currently it does not ].
- * Optional color quantization (e.g., reduction to 256 colors).
- * Optional color precision reduction (e.g., 24-bit to 15-bit color).
- [This feature is not currently implemented.]
-
-We also need overall control, marker parsing, and a data source module.
-The support code (memory management & error handling) can be shared with
-the compression half of the library.
-
-There may be several implementations of each of these elements, particularly
-in the decompressor, where a wide range of speed/quality tradeoffs is very
-useful. It must be understood that some of the best speedups involve
-merging adjacent steps in the pipeline. For example, upsampling, color space
-conversion, and color quantization might all be done at once when using a
-low-quality ordered-dither technique. The system architecture is designed to
-allow such merging where appropriate.
-
-
-Note: it is convenient to regard edge expansion (padding to block boundaries)
-as a preprocessing/postprocessing function, even though the JPEG spec includes
-it in compression/decompression. We do this because downsampling/upsampling
-can be simplified a little if they work on padded data: it's not necessary to
-have special cases at the right and bottom edges. Therefore the interface
-buffer is always an integral number of blocks wide and high, and we expect
-compression preprocessing to pad the source data properly. Padding will occur
-only to the next block (8-sample) boundary. In an interleaved-scan situation,
-additional dummy blocks may be used to fill out MCUs, but the MCU assembly and
-disassembly logic will create or discard these blocks internally. (This is
-advantageous for speed reasons, since we avoid DCTing the dummy blocks.
-It also permits a small reduction in file size, because the compressor can
-choose dummy block contents so as to minimize their size in compressed form.
-Finally, it makes the interface buffer specification independent of whether
-the file is actually interleaved or not.) Applications that wish to deal
-directly with the downsampled data must provide similar buffering and padding
-for odd-sized images.
-
-
-*** Poor man's object-oriented programming ***
-
-It should be clear by now that we have a lot of quasi-independent processing
-steps, many of which have several possible behaviors. To avoid cluttering the
-code with lots of switch statements, we use a simple form of object-style
-programming to separate out the different possibilities.
-
-For example, two different color quantization algorithms could be implemented
-as two separate modules that present the same external interface; at runtime,
-the calling code will access the proper module indirectly through an "object".
-
-We can get the limited features we need while staying within portable C.
-The basic tool is a function pointer. An "object" is just a struct
-containing one or more function pointer fields, each of which corresponds to
-a method name in real object-oriented languages. During initialization we
-fill in the function pointers with references to whichever module we have
-determined we need to use in this run. Then invocation of the module is done
-by indirecting through a function pointer; on most machines this is no more
-expensive than a switch statement, which would be the only other way of
-making the required run-time choice. The really significant benefit, of
-course, is keeping the source code clean and well structured.
-
-We can also arrange to have private storage that varies between different
-implementations of the same kind of object. We do this by making all the
-module-specific object structs be separately allocated entities, which will
-be accessed via pointers in the master compression or decompression struct.
-The "public" fields or methods for a given kind of object are specified by
-a commonly known struct. But a module's initialization code can allocate
-a larger struct that contains the common struct as its first member, plus
-additional private fields. With appropriate pointer casting, the module's
-internal functions can access these private fields. (For a simple example,
-see jdatadst.c, which implements the external interface specified by struct
-jpeg_destination_mgr, but adds extra fields.)
-
-(Of course this would all be a lot easier if we were using C++, but we are
-not yet prepared to assume that everyone has a C++ compiler.)
-
-An important benefit of this scheme is that it is easy to provide multiple
-versions of any method, each tuned to a particular case. While a lot of
-precalculation might be done to select an optimal implementation of a method,
-the cost per invocation is constant. For example, the upsampling step might
-have a "generic" method, plus one or more "hardwired" methods for the most
-popular sampling factors; the hardwired methods would be faster because they'd
-use straight-line code instead of for-loops. The cost to determine which
-method to use is paid only once, at startup, and the selection criteria are
-hidden from the callers of the method.
-
-This plan differs a little bit from usual object-oriented structures, in that
-only one instance of each object class will exist during execution. The
-reason for having the class structure is that on different runs we may create
-different instances (choose to execute different modules). You can think of
-the term "method" as denoting the common interface presented by a particular
-set of interchangeable functions, and "object" as denoting a group of related
-methods, or the total shared interface behavior of a group of modules.
-
-
-*** Overall control structure ***
-
-We previously mentioned the need for overall control logic in the compression
-and decompression libraries. In IJG implementations prior to v5, overall
-control was mostly provided by "pipeline control" modules, which proved to be
-large, unwieldy, and hard to understand. To improve the situation, the
-control logic has been subdivided into multiple modules. The control modules
-consist of:
-
-1. Master control for module selection and initialization. This has two
-responsibilities:
-
- 1A. Startup initialization at the beginning of image processing.
- The individual processing modules to be used in this run are selected
- and given initialization calls.
-
- 1B. Per-pass control. This determines how many passes will be performed
- and calls each active processing module to configure itself
- appropriately at the beginning of each pass. End-of-pass processing,
- where necessary, is also invoked from the master control module.
-
- Method selection is partially distributed, in that a particular processing
- module may contain several possible implementations of a particular method,
- which it will select among when given its initialization call. The master
- control code need only be concerned with decisions that affect more than
- one module.
-
-2. Data buffering control. A separate control module exists for each
- inter-processing-step data buffer. This module is responsible for
- invoking the processing steps that write or read that data buffer.
-
-Each buffer controller sees the world as follows:
-
-input data => processing step A => buffer => processing step B => output data
- | | |
- ------------------ controller ------------------
-
-The controller knows the dataflow requirements of steps A and B: how much data
-they want to accept in one chunk and how much they output in one chunk. Its
-function is to manage its buffer and call A and B at the proper times.
-
-A data buffer control module may itself be viewed as a processing step by a
-higher-level control module; thus the control modules form a binary tree with
-elementary processing steps at the leaves of the tree.
-
-The control modules are objects. A considerable amount of flexibility can
-be had by replacing implementations of a control module. For example:
-* Merging of adjacent steps in the pipeline is done by replacing a control
- module and its pair of processing-step modules with a single processing-
- step module. (Hence the possible merges are determined by the tree of
- control modules.)
-* In some processing modes, a given interstep buffer need only be a "strip"
- buffer large enough to accommodate the desired data chunk sizes. In other
- modes, a full-image buffer is needed and several passes are required.
- The control module determines which kind of buffer is used and manipulates
- virtual array buffers as needed. One or both processing steps may be
- unaware of the multi-pass behavior.
-
-In theory, we might be able to make all of the data buffer controllers
-interchangeable and provide just one set of implementations for all. In
-practice, each one contains considerable special-case processing for its
-particular job. The buffer controller concept should be regarded as an
-overall system structuring principle, not as a complete description of the
-task performed by any one controller.
-
-
-*** Compression object structure ***
-
-Here is a sketch of the logical structure of the JPEG compression library:
-
- |-- Colorspace conversion
- |-- Preprocessing controller --|
- | |-- Downsampling
-Main controller --|
- | |-- Forward DCT, quantize
- |-- Coefficient controller --|
- |-- Entropy encoding
-
-This sketch also describes the flow of control (subroutine calls) during
-typical image data processing. Each of the components shown in the diagram is
-an "object" which may have several different implementations available. One
-or more source code files contain the actual implementation(s) of each object.
-
-The objects shown above are:
-
-* Main controller: buffer controller for the subsampled-data buffer, which
- holds the preprocessed input data. This controller invokes preprocessing to
- fill the subsampled-data buffer, and JPEG compression to empty it. There is
- usually no need for a full-image buffer here; a strip buffer is adequate.
-
-* Preprocessing controller: buffer controller for the downsampling input data
- buffer, which lies between colorspace conversion and downsampling. Note
- that a unified conversion/downsampling module would probably replace this
- controller entirely.
-
-* Colorspace conversion: converts application image data into the desired
- JPEG color space; also changes the data from pixel-interleaved layout to
- separate component planes. Processes one pixel row at a time.
-
-* Downsampling: performs reduction of chroma components as required.
- Optionally may perform pixel-level smoothing as well. Processes a "row
- group" at a time, where a row group is defined as Vmax pixel rows of each
- component before downsampling, and Vk sample rows afterwards (remember Vk
- differs across components). Some downsampling or smoothing algorithms may
- require context rows above and below the current row group; the
- preprocessing controller is responsible for supplying these rows via proper
- buffering. The downsampler is responsible for edge expansion at the right
- edge (i.e., extending each sample row to a multiple of 8 samples); but the
- preprocessing controller is responsible for vertical edge expansion (i.e.,
- duplicating the bottom sample row as needed to make a multiple of 8 rows).
-
-* Coefficient controller: buffer controller for the DCT-coefficient data.
- This controller handles MCU assembly, including insertion of dummy DCT
- blocks when needed at the right or bottom edge. When performing
- Huffman-code optimization or emitting a multiscan JPEG file, this
- controller is responsible for buffering the full image. The equivalent of
- one fully interleaved MCU row of subsampled data is processed per call,
- even when the JPEG file is noninterleaved.
-
-* Forward DCT and quantization: Perform DCT, quantize, and emit coefficients.
- Works on one or more DCT blocks at a time. (Note: the coefficients are now
- emitted in normal array order, which the entropy encoder is expected to
- convert to zigzag order as necessary. Prior versions of the IJG code did
- the conversion to zigzag order within the quantization step.)
-
-* Entropy encoding: Perform Huffman or arithmetic entropy coding and emit the
- coded data to the data destination module. Works on one MCU per call.
- For progressive JPEG, the same DCT blocks are fed to the entropy coder
- during each pass, and the coder must emit the appropriate subset of
- coefficients.
-
-In addition to the above objects, the compression library includes these
-objects:
-
-* Master control: determines the number of passes required, controls overall
- and per-pass initialization of the other modules.
-
-* Marker writing: generates JPEG markers (except for RSTn, which is emitted
- by the entropy encoder when needed).
-
-* Data destination manager: writes the output JPEG datastream to its final
- destination (e.g., a file). The destination manager supplied with the
- library knows how to write to a stdio stream; for other behaviors, the
- surrounding application may provide its own destination manager.
-
-* Memory manager: allocates and releases memory, controls virtual arrays
- (with backing store management, where required).
-
-* Error handler: performs formatting and output of error and trace messages;
- determines handling of nonfatal errors. The surrounding application may
- override some or all of this object's methods to change error handling.
-
-* Progress monitor: supports output of "percent-done" progress reports.
- This object represents an optional callback to the surrounding application:
- if wanted, it must be supplied by the application.
-
-The error handler, destination manager, and progress monitor objects are
-defined as separate objects in order to simplify application-specific
-customization of the JPEG library. A surrounding application may override
-individual methods or supply its own all-new implementation of one of these
-objects. The object interfaces for these objects are therefore treated as
-part of the application interface of the library, whereas the other objects
-are internal to the library.
-
-The error handler and memory manager are shared by JPEG compression and
-decompression; the progress monitor, if used, may be shared as well.
-
-
-*** Decompression object structure ***
-
-Here is a sketch of the logical structure of the JPEG decompression library:
-
- |-- Entropy decoding
- |-- Coefficient controller --|
- | |-- Dequantize, Inverse DCT
-Main controller --|
- | |-- Upsampling
- |-- Postprocessing controller --| |-- Colorspace conversion
- |-- Color quantization
- |-- Color precision reduction
-
-As before, this diagram also represents typical control flow. The objects
-shown are:
-
-* Main controller: buffer controller for the subsampled-data buffer, which
- holds the output of JPEG decompression proper. This controller's primary
- task is to feed the postprocessing procedure. Some upsampling algorithms
- may require context rows above and below the current row group; when this
- is true, the main controller is responsible for managing its buffer so as
- to make context rows available. In the current design, the main buffer is
- always a strip buffer; a full-image buffer is never required.
-
-* Coefficient controller: buffer controller for the DCT-coefficient data.
- This controller handles MCU disassembly, including deletion of any dummy
- DCT blocks at the right or bottom edge. When reading a multiscan JPEG
- file, this controller is responsible for buffering the full image.
- (Buffering DCT coefficients, rather than samples, is necessary to support
- progressive JPEG.) The equivalent of one fully interleaved MCU row of
- subsampled data is processed per call, even when the source JPEG file is
- noninterleaved.
-
-* Entropy decoding: Read coded data from the data source module and perform
- Huffman or arithmetic entropy decoding. Works on one MCU per call.
- For progressive JPEG decoding, the coefficient controller supplies the prior
- coefficients of each MCU (initially all zeroes), which the entropy decoder
- modifies in each scan.
-
-* Dequantization and inverse DCT: like it says. Note that the coefficients
- buffered by the coefficient controller have NOT been dequantized; we
- merge dequantization and inverse DCT into a single step for speed reasons.
- When scaled-down output is asked for, simplified DCT algorithms may be used
- that emit only 1x1, 2x2, or 4x4 samples per DCT block, not the full 8x8.
- Works on one DCT block at a time.
-
-* Postprocessing controller: buffer controller for the color quantization
- input buffer, when quantization is in use. (Without quantization, this
- controller just calls the upsampler.) For two-pass quantization, this
- controller is responsible for buffering the full-image data.
-
-* Upsampling: restores chroma components to full size. (May support more
- general output rescaling, too. Note that if undersized DCT outputs have
- been emitted by the DCT module, this module must adjust so that properly
- sized outputs are created.) Works on one row group at a time. This module
- also calls the color conversion module, so its top level is effectively a
- buffer controller for the upsampling->color conversion buffer. However, in
- all but the highest-quality operating modes, upsampling and color
- conversion are likely to be merged into a single step.
-
-* Colorspace conversion: convert from JPEG color space to output color space,
- and change data layout from separate component planes to pixel-interleaved.
- Works on one pixel row at a time.
-
-* Color quantization: reduce the data to colormapped form, using either an
- externally specified colormap or an internally generated one. This module
- is not used for full-color output. Works on one pixel row at a time; may
- require two passes to generate a color map. Note that the output will
- always be a single component representing colormap indexes. In the current
- design, the output values are JSAMPLEs, so an 8-bit compilation cannot
- quantize to more than 256 colors. This is unlikely to be a problem in
- practice.
-
-* Color reduction: this module handles color precision reduction, e.g.,
- generating 15-bit color (5 bits/primary) from JPEG's 24-bit output.
- Not quite clear yet how this should be handled... should we merge it with
- colorspace conversion???
-
-Note that some high-speed operating modes might condense the entire
-postprocessing sequence to a single module (upsample, color convert, and
-quantize in one step).
-
-In addition to the above objects, the decompression library includes these
-objects:
-
-* Master control: determines the number of passes required, controls overall
- and per-pass initialization of the other modules. This is subdivided into
- input and output control: jdinput.c controls only input-side processing,
- while jdmaster.c handles overall initialization and output-side control.
-
-* Marker reading: decodes JPEG markers (except for RSTn).
-
-* Data source manager: supplies the input JPEG datastream. The source
- manager supplied with the library knows how to read from a stdio stream;
- for other behaviors, the surrounding application may provide its own source
- manager.
-
-* Memory manager: same as for compression library.
-
-* Error handler: same as for compression library.
-
-* Progress monitor: same as for compression library.
-
-As with compression, the data source manager, error handler, and progress
-monitor are candidates for replacement by a surrounding application.
-
-
-*** Decompression input and output separation ***
-
-To support efficient incremental display of progressive JPEG files, the
-decompressor is divided into two sections that can run independently:
-
-1. Data input includes marker parsing, entropy decoding, and input into the
- coefficient controller's DCT coefficient buffer. Note that this
- processing is relatively cheap and fast.
-
-2. Data output reads from the DCT coefficient buffer and performs the IDCT
- and all postprocessing steps.
-
-For a progressive JPEG file, the data input processing is allowed to get
-arbitrarily far ahead of the data output processing. (This occurs only
-if the application calls jpeg_consume_input(); otherwise input and output
-run in lockstep, since the input section is called only when the output
-section needs more data.) In this way the application can avoid making
-extra display passes when data is arriving faster than the display pass
-can run. Furthermore, it is possible to abort an output pass without
-losing anything, since the coefficient buffer is read-only as far as the
-output section is concerned. See libjpeg.doc for more detail.
-
-A full-image coefficient array is only created if the JPEG file has multiple
-scans (or if the application specifies buffered-image mode anyway). When
-reading a single-scan file, the coefficient controller normally creates only
-a one-MCU buffer, so input and output processing must run in lockstep in this
-case. jpeg_consume_input() is effectively a no-op in this situation.
-
-The main impact of dividing the decompressor in this fashion is that we must
-be very careful with shared variables in the cinfo data structure. Each
-variable that can change during the course of decompression must be
-classified as belonging to data input or data output, and each section must
-look only at its own variables. For example, the data output section may not
-depend on any of the variables that describe the current scan in the JPEG
-file, because these may change as the data input section advances into a new
-scan.
-
-The progress monitor is (somewhat arbitrarily) defined to treat input of the
-file as one pass when buffered-image mode is not used, and to ignore data
-input work completely when buffered-image mode is used. Note that the
-library has no reliable way to predict the number of passes when dealing
-with a progressive JPEG file, nor can it predict the number of output passes
-in buffered-image mode. So the work estimate is inherently bogus anyway.
-
-No comparable division is currently made in the compression library, because
-there isn't any real need for it.
-
-
-*** Data formats ***
-
-Arrays of pixel sample values use the following data structure:
-
- typedef something JSAMPLE; a pixel component value, 0..MAXJSAMPLE
- typedef JSAMPLE *JSAMPROW; ptr to a row of samples
- typedef JSAMPROW *JSAMPARRAY; ptr to a list of rows
- typedef JSAMPARRAY *JSAMPIMAGE; ptr to a list of color-component arrays
-
-The basic element type JSAMPLE will typically be one of unsigned char,
-(signed) char, or short. Short will be used if samples wider than 8 bits are
-to be supported (this is a compile-time option). Otherwise, unsigned char is
-used if possible. If the compiler only supports signed chars, then it is
-necessary to mask off the value when reading. Thus, all reads of JSAMPLE
-values must be coded as "GETJSAMPLE(value)", where the macro will be defined
-as "((value) & 0xFF)" on signed-char machines and "((int) (value))" elsewhere.
-
-With these conventions, JSAMPLE values can be assumed to be >= 0. This helps
-simplify correct rounding during downsampling, etc. The JPEG standard's
-specification that sample values run from -128..127 is accommodated by
-subtracting 128 just as the sample value is copied into the source array for
-the DCT step (this will be an array of signed ints). Similarly, during
-decompression the output of the IDCT step will be immediately shifted back to
-0..255. (NB: different values are required when 12-bit samples are in use.
-The code is written in terms of MAXJSAMPLE and CENTERJSAMPLE, which will be
-defined as 255 and 128 respectively in an 8-bit implementation, and as 4095
-and 2048 in a 12-bit implementation.)
-
-We use a pointer per row, rather than a two-dimensional JSAMPLE array. This
-choice costs only a small amount of memory and has several benefits:
-* Code using the data structure doesn't need to know the allocated width of
- the rows. This simplifies edge expansion/compression, since we can work
- in an array that's wider than the logical picture width.
-* Indexing doesn't require multiplication; this is a performance win on many
- machines.
-* Arrays with more than 64K total elements can be supported even on machines
- where malloc() cannot allocate chunks larger than 64K.
-* The rows forming a component array may be allocated at different times
- without extra copying. This trick allows some speedups in smoothing steps
- that need access to the previous and next rows.
-
-Note that each color component is stored in a separate array; we don't use the
-traditional layout in which the components of a pixel are stored together.
-This simplifies coding of modules that work on each component independently,
-because they don't need to know how many components there are. Furthermore,
-we can read or write each component to a temporary file independently, which
-is helpful when dealing with noninterleaved JPEG files.
-
-In general, a specific sample value is accessed by code such as
- GETJSAMPLE(image[colorcomponent][row][col])
-where col is measured from the image left edge, but row is measured from the
-first sample row currently in memory. Either of the first two indexings can
-be precomputed by copying the relevant pointer.
-
-
-Since most image-processing applications prefer to work on images in which
-the components of a pixel are stored together, the data passed to or from the
-surrounding application uses the traditional convention: a single pixel is
-represented by N consecutive JSAMPLE values, and an image row is an array of
-(# of color components)*(image width) JSAMPLEs. One or more rows of data can
-be represented by a pointer of type JSAMPARRAY in this scheme. This scheme is
-converted to component-wise storage inside the JPEG library. (Applications
-that want to skip JPEG preprocessing or postprocessing will have to contend
-with component-wise storage.)
-
-
-Arrays of DCT-coefficient values use the following data structure:
-
- typedef short JCOEF; a 16-bit signed integer
- typedef JCOEF JBLOCK[DCTSIZE2]; an 8x8 block of coefficients
- typedef JBLOCK *JBLOCKROW; ptr to one horizontal row of 8x8 blocks
- typedef JBLOCKROW *JBLOCKARRAY; ptr to a list of such rows
- typedef JBLOCKARRAY *JBLOCKIMAGE; ptr to a list of color component arrays
-
-The underlying type is at least a 16-bit signed integer; while "short" is big
-enough on all machines of interest, on some machines it is preferable to use
-"int" for speed reasons, despite the storage cost. Coefficients are grouped
-into 8x8 blocks (but we always use #defines DCTSIZE and DCTSIZE2 rather than
-"8" and "64").
-
-The contents of a coefficient block may be in either "natural" or zigzagged
-order, and may be true values or divided by the quantization coefficients,
-depending on where the block is in the processing pipeline. In the current
-library, coefficient blocks are kept in natural order everywhere; the entropy
-codecs zigzag or dezigzag the data as it is written or read. The blocks
-contain quantized coefficients everywhere outside the DCT/IDCT subsystems.
-(This latter decision may need to be revisited to support variable
-quantization a la JPEG Part 3.)
-
-Notice that the allocation unit is now a row of 8x8 blocks, corresponding to
-eight rows of samples. Otherwise the structure is much the same as for
-samples, and for the same reasons.
-
-On machines where malloc() can't handle a request bigger than 64Kb, this data
-structure limits us to rows of less than 512 JBLOCKs, or a picture width of
-4000+ pixels. This seems an acceptable restriction.
-
-
-On 80x86 machines, the bottom-level pointer types (JSAMPROW and JBLOCKROW)
-must be declared as "far" pointers, but the upper levels can be "near"
-(implying that the pointer lists are allocated in the DS segment).
-We use a #define symbol FAR, which expands to the "far" keyword when
-compiling on 80x86 machines and to nothing elsewhere.
-
-
-*** Suspendable processing ***
-
-In some applications it is desirable to use the JPEG library as an
-incremental, memory-to-memory filter. In this situation the data source or
-destination may be a limited-size buffer, and we can't rely on being able to
-empty or refill the buffer at arbitrary times. Instead the application would
-like to have control return from the library at buffer overflow/underrun, and
-then resume compression or decompression at a later time.
-
-This scenario is supported for simple cases. (For anything more complex, we
-recommend that the application "bite the bullet" and develop real multitasking
-capability.) The libjpeg.doc file goes into more detail about the usage and
-limitations of this capability; here we address the implications for library
-structure.
-
-The essence of the problem is that the entropy codec (coder or decoder) must
-be prepared to stop at arbitrary times. In turn, the controllers that call
-the entropy codec must be able to stop before having produced or consumed all
-the data that they normally would handle in one call. That part is reasonably
-straightforward: we make the controller call interfaces include "progress
-counters" which indicate the number of data chunks successfully processed, and
-we require callers to test the counter rather than just assume all of the data
-was processed.
-
-Rather than trying to restart at an arbitrary point, the current Huffman
-codecs are designed to restart at the beginning of the current MCU after a
-suspension due to buffer overflow/underrun. At the start of each call, the
-codec's internal state is loaded from permanent storage (in the JPEG object
-structures) into local variables. On successful completion of the MCU, the
-permanent state is updated. (This copying is not very expensive, and may even
-lead to *improved* performance if the local variables can be registerized.)
-If a suspension occurs, the codec simply returns without updating the state,
-thus effectively reverting to the start of the MCU. Note that this implies
-leaving some data unprocessed in the source/destination buffer (ie, the
-compressed partial MCU). The data source/destination module interfaces are
-specified so as to make this possible. This also implies that the data buffer
-must be large enough to hold a worst-case compressed MCU; a couple thousand
-bytes should be enough.
-
-In a successive-approximation AC refinement scan, the progressive Huffman
-decoder has to be able to undo assignments of newly nonzero coefficients if it
-suspends before the MCU is complete, since decoding requires distinguishing
-previously-zero and previously-nonzero coefficients. This is a bit tedious
-but probably won't have much effect on performance. Other variants of Huffman
-decoding need not worry about this, since they will just store the same values
-again if forced to repeat the MCU.
-
-This approach would probably not work for an arithmetic codec, since its
-modifiable state is quite large and couldn't be copied cheaply. Instead it
-would have to suspend and resume exactly at the point of the buffer end.
-
-The JPEG marker reader is designed to cope with suspension at an arbitrary
-point. It does so by backing up to the start of the marker parameter segment,
-so the data buffer must be big enough to hold the largest marker of interest.
-Again, a couple KB should be adequate. (A special "skip" convention is used
-to bypass COM and APPn markers, so these can be larger than the buffer size
-without causing problems; otherwise a 64K buffer would be needed in the worst
-case.)
-
-The JPEG marker writer currently does *not* cope with suspension. I feel that
-this is not necessary; it is much easier simply to require the application to
-ensure there is enough buffer space before starting. (An empty 2K buffer is
-more than sufficient for the header markers; and ensuring there are a dozen or
-two bytes available before calling jpeg_finish_compress() will suffice for the
-trailer.) This would not work for writing multi-scan JPEG files, but
-we simply do not intend to support that capability with suspension.
-
-
-*** Memory manager services ***
-
-The JPEG library's memory manager controls allocation and deallocation of
-memory, and it manages large "virtual" data arrays on machines where the
-operating system does not provide virtual memory. Note that the same
-memory manager serves both compression and decompression operations.
-
-In all cases, allocated objects are tied to a particular compression or
-decompression master record, and they will be released when that master
-record is destroyed.
-
-The memory manager does not provide explicit deallocation of objects.
-Instead, objects are created in "pools" of free storage, and a whole pool
-can be freed at once. This approach helps prevent storage-leak bugs, and
-it speeds up operations whenever malloc/free are slow (as they often are).
-The pools can be regarded as lifetime identifiers for objects. Two
-pools/lifetimes are defined:
- * JPOOL_PERMANENT lasts until master record is destroyed
- * JPOOL_IMAGE lasts until done with image (JPEG datastream)
-Permanent lifetime is used for parameters and tables that should be carried
-across from one datastream to another; this includes all application-visible
-parameters. Image lifetime is used for everything else. (A third lifetime,
-JPOOL_PASS = one processing pass, was originally planned. However it was
-dropped as not being worthwhile. The actual usage patterns are such that the
-peak memory usage would be about the same anyway; and having per-pass storage
-substantially complicates the virtual memory allocation rules --- see below.)
-
-The memory manager deals with three kinds of object:
-1. "Small" objects. Typically these require no more than 10K-20K total.
-2. "Large" objects. These may require tens to hundreds of K depending on
- image size. Semantically they behave the same as small objects, but we
- distinguish them for two reasons:
- * On MS-DOS machines, large objects are referenced by FAR pointers,
- small objects by NEAR pointers.
- * Pool allocation heuristics may differ for large and small objects.
- Note that individual "large" objects cannot exceed the size allowed by
- type size_t, which may be 64K or less on some machines.
-3. "Virtual" objects. These are large 2-D arrays of JSAMPLEs or JBLOCKs
- (typically large enough for the entire image being processed). The
- memory manager provides stripwise access to these arrays. On machines
- without virtual memory, the rest of the array may be swapped out to a
- temporary file.
-
-(Note: JSAMPARRAY and JBLOCKARRAY data structures are a combination of large
-objects for the data proper and small objects for the row pointers. For
-convenience and speed, the memory manager provides single routines to create
-these structures. Similarly, virtual arrays include a small control block
-and a JSAMPARRAY or JBLOCKARRAY working buffer, all created with one call.)
-
-In the present implementation, virtual arrays are only permitted to have image
-lifespan. (Permanent lifespan would not be reasonable, and pass lifespan is
-not very useful since a virtual array's raison d'etre is to store data for
-multiple passes through the image.) We also expect that only "small" objects
-will be given permanent lifespan, though this restriction is not required by
-the memory manager.
-
-In a non-virtual-memory machine, some performance benefit can be gained by
-making the in-memory buffers for virtual arrays be as large as possible.
-(For small images, the buffers might fit entirely in memory, so blind
-swapping would be very wasteful.) The memory manager will adjust the height
-of the buffers to fit within a prespecified maximum memory usage. In order
-to do this in a reasonably optimal fashion, the manager needs to allocate all
-of the virtual arrays at once. Therefore, there isn't a one-step allocation
-routine for virtual arrays; instead, there is a "request" routine that simply
-allocates the control block, and a "realize" routine (called just once) that
-determines space allocation and creates all of the actual buffers. The
-realize routine must allow for space occupied by non-virtual large objects.
-(We don't bother to factor in the space needed for small objects, on the
-grounds that it isn't worth the trouble.)
-
-To support all this, we establish the following protocol for doing business
-with the memory manager:
- 1. Modules must request virtual arrays (which may have only image lifespan)
- during the initial setup phase, i.e., in their jinit_xxx routines.
- 2. All "large" objects (including JSAMPARRAYs and JBLOCKARRAYs) must also be
- allocated during initial setup.
- 3. realize_virt_arrays will be called at the completion of initial setup.
- The above conventions ensure that sufficient information is available
- for it to choose a good size for virtual array buffers.
-Small objects of any lifespan may be allocated at any time. We expect that
-the total space used for small objects will be small enough to be negligible
-in the realize_virt_arrays computation.
-
-In a virtual-memory machine, we simply pretend that the available space is
-infinite, thus causing realize_virt_arrays to decide that it can allocate all
-the virtual arrays as full-size in-memory buffers. The overhead of the
-virtual-array access protocol is very small when no swapping occurs.
-
-A virtual array can be specified to be "pre-zeroed"; when this flag is set,
-never-yet-written sections of the array are set to zero before being made
-available to the caller. If this flag is not set, never-written sections
-of the array contain garbage. (This feature exists primarily because the
-equivalent logic would otherwise be needed in jdcoefct.c for progressive
-JPEG mode; we may as well make it available for possible other uses.)
-
-The first write pass on a virtual array is required to occur in top-to-bottom
-order; read passes, as well as any write passes after the first one, may
-access the array in any order. This restriction exists partly to simplify
-the virtual array control logic, and partly because some file systems may not
-support seeking beyond the current end-of-file in a temporary file. The main
-implication of this restriction is that rearrangement of rows (such as
-converting top-to-bottom data order to bottom-to-top) must be handled while
-reading data out of the virtual array, not while putting it in.
-
-
-*** Memory manager internal structure ***
-
-To isolate system dependencies as much as possible, we have broken the
-memory manager into two parts. There is a reasonably system-independent
-"front end" (jmemmgr.c) and a "back end" that contains only the code
-likely to change across systems. All of the memory management methods
-outlined above are implemented by the front end. The back end provides
-the following routines for use by the front end (none of these routines
-are known to the rest of the JPEG code):
-
-jpeg_mem_init, jpeg_mem_term system-dependent initialization/shutdown
-
-jpeg_get_small, jpeg_free_small interface to malloc and free library routines
- (or their equivalents)
-
-jpeg_get_large, jpeg_free_large interface to FAR malloc/free in MSDOS machines;
- else usually the same as
- jpeg_get_small/jpeg_free_small
-
-jpeg_mem_available estimate available memory
-
-jpeg_open_backing_store create a backing-store object
-
-read_backing_store, manipulate a backing-store object
-write_backing_store,
-close_backing_store
-
-On some systems there will be more than one type of backing-store object
-(specifically, in MS-DOS a backing store file might be an area of extended
-memory as well as a disk file). jpeg_open_backing_store is responsible for
-choosing how to implement a given object. The read/write/close routines
-are method pointers in the structure that describes a given object; this
-lets them be different for different object types.
-
-It may be necessary to ensure that backing store objects are explicitly
-released upon abnormal program termination. For example, MS-DOS won't free
-extended memory by itself. To support this, we will expect the main program
-or surrounding application to arrange to call self_destruct (typically via
-jpeg_destroy) upon abnormal termination. This may require a SIGINT signal
-handler or equivalent. We don't want to have the back end module install its
-own signal handler, because that would pre-empt the surrounding application's
-ability to control signal handling.
-
-The IJG distribution includes several memory manager back end implementations.
-Usually the same back end should be suitable for all applications on a given
-system, but it is possible for an application to supply its own back end at
-need.
-
-
-*** Implications of DNL marker ***
-
-Some JPEG files may use a DNL marker to postpone definition of the image
-height (this would be useful for a fax-like scanner's output, for instance).
-In these files the SOF marker claims the image height is 0, and you only
-find out the true image height at the end of the first scan.
-
-We could read these files as follows:
-1. Upon seeing zero image height, replace it by 65535 (the maximum allowed).
-2. When the DNL is found, update the image height in the global image
- descriptor.
-This implies that control modules must avoid making copies of the image
-height, and must re-test for termination after each MCU row. This would
-be easy enough to do.
-
-In cases where image-size data structures are allocated, this approach will
-result in very inefficient use of virtual memory or much-larger-than-necessary
-temporary files. This seems acceptable for something that probably won't be a
-mainstream usage. People might have to forgo use of memory-hogging options
-(such as two-pass color quantization or noninterleaved JPEG files) if they
-want efficient conversion of such files. (One could improve efficiency by
-demanding a user-supplied upper bound for the height, less than 65536; in most
-cases it could be much less.)
-
-The standard also permits the SOF marker to overestimate the image height,
-with a DNL to give the true, smaller height at the end of the first scan.
-This would solve the space problems if the overestimate wasn't too great.
-However, it implies that you don't even know whether DNL will be used.
-
-This leads to a couple of very serious objections:
-1. Testing for a DNL marker must occur in the inner loop of the decompressor's
- Huffman decoder; this implies a speed penalty whether the feature is used
- or not.
-2. There is no way to hide the last-minute change in image height from an
- application using the decoder. Thus *every* application using the IJG
- library would suffer a complexity penalty whether it cared about DNL or
- not.
-We currently do not support DNL because of these problems.
-
-A different approach is to insist that DNL-using files be preprocessed by a
-separate program that reads ahead to the DNL, then goes back and fixes the SOF
-marker. This is a much simpler solution and is probably far more efficient.
-Even if one wants piped input, buffering the first scan of the JPEG file needs
-a lot smaller temp file than is implied by the maximum-height method. For
-this approach we'd simply treat DNL as a no-op in the decompressor (at most,
-check that it matches the SOF image height).
-
-We will not worry about making the compressor capable of outputting DNL.
-Something similar to the first scheme above could be applied if anyone ever
-wants to make that work.
diff --git a/libjpegtwrp/testimg.bmp b/libjpegtwrp/testimg.bmp
deleted file mode 100644
index 8603d1548..000000000
--- a/libjpegtwrp/testimg.bmp
+++ /dev/null
Binary files differ
diff --git a/libjpegtwrp/testimg.jpg b/libjpegtwrp/testimg.jpg
deleted file mode 100644
index b34ca5d31..000000000
--- a/libjpegtwrp/testimg.jpg
+++ /dev/null
Binary files differ
diff --git a/libjpegtwrp/testimg.ppm b/libjpegtwrp/testimg.ppm
deleted file mode 100644
index 9d81ce24a..000000000
--- a/libjpegtwrp/testimg.ppm
+++ /dev/null
@@ -1,4 +0,0 @@
-P6
-227 149
-255
-0/-0/-10.21/51.51.62/62/83/83/:3-:3-:3-:3-:3-:3-:2/91.91.80-80-91.91.:2/80-80-80-80-80-80-80-80-6.+6.+6.+5-*5-*4,)4,)4,)4,)4,)4,)4,)4,)4,)4,)2-)/*$/,%/,%0-&1.'2/(30)30)63,63,74-85.85.96/:70:7.A:0B<0D>2F@4IA4JB5KC6KC6MD5MD5OC3NB2OC3OC3PD4RE5R?1Y?2b@4nB5}E6‹H8™G9£F7¯G:¸G9¾E:ÅG;ÇG>ÊG?ËH@ÐE@çFLíCLëDKëEIîCIïBDñ>Bô=Aø;A÷:@ô:?ð<?é?@â@>×?<ËA7»=/µ@.µ@.´?-´?-³@-²?-¯@-­@,ªA,¦A-¢B,Ÿ@*›A)˜@*–A,”>-’?/’?/‘>.‘>,=+’<+’<+”?+”?+”=*”=*”=*•>+–?,–@/–?6•>5—=2Ÿ?1©B3³D3¼D4¿D4¹?0µA2¬F8žH;‡H9oA2T8*C3&=5295495473271160050-50-72/72/72/61.61-50,50,41,//-.0-//-//-0/-0/-2.-2.-5,-4+,4*+3)*7(+=.1E69P:<jBC|IHMM•OOŸW[ªdnªoƒŸt”{£‡®€†º~ˆ½sy­`a‘TKvPDhSJgOG^MH^TQbfdo|}‚‘™ž˜£©Ÿ¢¨šž “’{|lfgUXWEQNEUR[UQbUQb0/-0/-10.10.40-51.62/62/83/83/:3-:3-:3-:3-:3-:3-91.91.80-80-80-80-91.91.80-80-80-80-80-80-80-80-6.+6.+5-*5-*5-*4,)4,)4,)5-*5-*5-*5-*5-*5-*5-*3.*0+%0-&0-&1.'2/(30)41*41*63,63,74-74-85.96/:70:7.@9/A;/C=1E?3H@3IA4JB5JB5LC4LC4MA1MA1MA1NB2OC3QD4P>0U?1^A3jC4xD6„E4’E5œC3§C4¯A4µA4¼B7ÀD:ÄE<ÅF=ÍC@áEIçBIèCIêDHíDGïBDó@Cö?Cø;A÷:@ô:?ð<?é?@àA>Õ@<Ê@6¹>/µ@.´?-´?-´?-²?,°?-¯@-­@,©@+¦A-¡A+Ÿ@*›A)˜@*–A,”>-’?/‘>.‘>.‘>,=+’<+’<+”?+“>*”=*”=*”=*•>+–?,–@/”@5•>5˜>3 >1«A3µD4½C4¿D5»A2·C6¬F8œI;…G:l@3S9*B4)>63:6595484382271161.61.72/72/72/61.61-50,50,41,//-.0-//-//-0/-0/-2.-2.-3--5,-4*+3)*5)+<-0C47N8:d>=vEA†JINLšTV¤aj¥l}rŽ‘{¢†€®…¹{„»ou©[[QHuOCiOFeOG_PH_RN_[Yfnotƒ‡ˆ”™•™ž—š ”™‘ƒ~ojkY][LVSJXSZVRaXQa/.,/.,0/-10.40-40-51.51.72.72.72.72.92,92,92,92,91.80.7/-7/-7/-7/-80.91/80.80.80.80.80.80.80.80.6.,5-+5-+5-+4,*4,*4,*4,*5-+5-+5-+5-+5-+5-+5-+3.*2-'1.'2/(30)30)41*41*52+63,63,63,74-85.96/96/:7.?8.@:.B<0D>2G?4H@5H@3H@3I@1I@1K?1K?1K?/L@0MA1NB2MA1QA1YB2dC2qC3|C2‡B2’A0˜<- :+§;.¯=2µ@6ºD:¿F=ÅD>ÙCEá@FãBGçBFêDFðCEôADø?Dú;@ù:?õ;@ð=@è@@ÜA=Ñ@;Æ@5·=.³@-³@-²?,²?-°?-¯>,­@,ª?-§@-¥@,¡A+A,š?*˜@*•@+”>-‘>.‘>.‘>.=+=+=+=+‘>,‘>,’<+’<+“=,“=,”?+•?.•A6–?5š>3£>2¯A4¹C5¿D5ÁC5ÀD8¸F;®I=™J=G;h@4Q:,B5,?74=77<66:4494183072/72/62/62/62/51.52-41,41,21,.0-,1-.0-.0-//-//-0/-2.-5//4..5,-4*+4*+9-/>24I56[97l?9|E@†IDOM˜[`›fv”mˆŒwžƒ}­}‚¹u~·fm¤TV‰MEvLAkMAeOFcQHcMH^NK\[[eqty…‰ˆ‡Œ†Šˆ…†Š|xzlfiXZ[MVSLZU[ZT`[S`.-+/.,/.,0/-3/,40-40-40-61-61-61-61-81+81+81+81+7/-7/-6.,6.,6.,6.,7/-7/-80.80.80.80.80.80.80.80.5-+5-+5-+4,*4,*4,*3+)3+)6.,6.,6.,6.,6.,6.,6.,4/,30+30)30)41*41*52+52+52+52+52+63,74-85.85.96/96->7-?9-@:.B<0E=2E=2F>1F>1G=1G>/H<.I=/I=/J>.L@0JA0KD2NE4UD4^D3iD2sB1~A/†?-Œ9)”9'9*£<-¬@3³E8¸H<ÁF>ÒDCÚACÞBCâDCçCDìBCó@C÷?Aú;@ù:?õ;@î>@åA@ÚB=Í@9Â@3µ=-°@,°@,°@,¯>,®?,®?,¬?+©@-¦?,£@+ @*œ@+˜@*–@)”?*‘>,‘>.‘>.=-=+=+<*<*=+=+<*<*’<+‘>,”>-’?-•A6–?5œ>2¦@4²B6¼C8ÁC7ÂB7ÂF<ºJ?¬L@—K>|F:b@4L:.A7-@85>96=77<74:5294183083062/62/62/32.52-21,21,12--2.-2./1./1.00.00.10.10.5106005//5,-4+,6,-:01D22T71c;3qA7{E;‚HD‰RU_l‹i‚ƒs˜}y«x}µowµ`f¢QR‹LEyL@pL@hPEgQFfLC^GBVMLZ^^fjnquyxx}wz€vwzokoa`bTWYLTTL]WY]V]]V^------.-+/.,0/-10.3/,40-3/,3/,4/+4/+4/+4/+6/)6/)4/,4/,3.+3.+3.+3.+4/,4/,50-50-50-50-50-50-50-50-3.+3.+2-*2-*2-*1,)1,)1,)4/,4/,4/,4/,4/,4/,4/,4/,41,41,41,41,41,52-52-52-52-52-63.63.74/85096196/<5-=6,?8.@9/B:/C;0C;0C;.D:.D:.F:.G;-H<.I=/J>0I@1JG6MH5RG5YF5bE3jD1uB/}>,‚;)‹:)“:*š=,£B2¬F8²J=»I?ÌGBÔDCØDBÝEBâBBéAAð=@ô<>ù:?ø:<ô<>í?>áB>ÓC:ÅA5¹?0²?-®?,®?,®?,­>-¬>-¬>-ª?-¨>.¤?- ?,ž?+š?,—?+•>*“>*‘>,?.>->->-Ž=,Ž=,Ž=,Ž=,Ž=,Ž=,Ž=,<,>-‘>.?.”B4—A4@1¨@3¶A7¿C9ÅB8ÄA7¾C;·H?¦LCJ@tE;Z>2E9-<5+@93@85?75>63=52<4194083/62/43/43/23.32.12-12-02--2.,2.-2.-2./1./1.00.10.3205105104..2,,4+,7./=/.N5.Y9.e=1n@3sB;yKK€Zeƒg€p—zxªu{·ks´_d¦TT”OGƒLBwNAmNBhMAeJA`GBYGFXKKWMPU]cc`fbbia`f\Z`TW[MUXMXXP^YV`WX`WZ,,,,,,.-+.-+/.,0/-3/,3/,2.+2.+3.*3.*3.*3.*5.(5-*3.+3.+2-*1,)1,)2-*3.+3.+3.+3.+3.+3.+3.+3.+3.+3.+2-*2-*2-*2-*1,)1,)1,)0+(3.+3.+3.+3.+3.+3.+3.+3.+41,41,41,41,41,41,41,41,41,52-52-63.74/85085085.;4,<5+=6,>7-@7.A9.A9.A9.C9/C9-E9-F:.G;/H<.J>0HA1JG6IH6NG5VF6\E3dC2n@0v>-{<+‚;)Œ;*”=,œ@1£F5ªJ:´J=ÄH@ÌEAÑFAÖE@ÞCAä@>ì>?ñ:<÷;<ô:;ð<=é@=ÜC=ÍC8¾@2±>,®?,«@,ª?+ª?+ª?-©>,©>,¨?,¥>-¢?, ?,›>,—?+•>*“>)‘?*>+>->->-Ž=,Ž=,Ž=,<+Ž=,‹<+<+‹<+‹<-Œ=,>/Ž?.”B4—A2 @2¬B5¹C9ÂC:ÅB:ÂA;ºA9±I@£NGNEoG=S?4A;/96-@93A75?74>63<4194083/74/43/43/34/23.23.02-02-.3--3/-3/.3/.3/02/02/11/11/21/32032040/2.-1-,4..8.,G4-O4)X8+`<0e?6mGFyYd‚k…€uŸ||²w|¼nu»dh¯[[¡RMLB~OArL@hI=cH>`HB^ECX@BO;@FBGJDMJJQJJQIIQFKQEOUIVWO^YS`YS`XU++++++,,,---/.,/.,0/-0/-1-*1-*1-*1-*2-)2-)2-)2-)2-*2,,1++1++1++1++2,,2,,1++1++1++1++1++1++1++1++2,,2,,2,,1++1++1++0**0**3--3--3--3--3--3--3--3.+41,41,41,30+30+30+30+30+41,41,52-63.74/74/85085.:3+;4,<5-=6.?6/?6-?6-?7,B8.B8.E8/E9-G;/H<0J>2H@3HE6GF4KE5QD4XC2_B2f?.n=,v=,|:*…9)Œ;*“=.›B2¢F7¬F8»F<ÂF>ÉF>ÐE>ÙD@âC?ê@@ð>>ò::ñ;:ì<<äA<ÖC;ÆD6µ@/ª=)ª?-©@-©@-¨?,¨>.¨>.§=-¥>-£=. ?.ž?-š?-–?,“>*‘?*>)>+>->-Œ=,Œ=.Œ=.‹<-‹<-‹<-Š=-Š;,‰<,Š</‹>.‹=0Œ?/’C2˜B1¡A1®B6¼C:ÂC<ÄC=ÀC=¹FA²QJ¥XRXQsRIWI>CC7<?6>93@72>71=60:5/94.83/63.43.43.34/13.13..3-.3-.3--3/-3/-3/-3/.3/.3/02/02/00.11/22021/0/-/.,2.-4/,?0+D0)K3)T8-Z<4dFFu]jƒs‰€«…„¾~ƒÇtzÆmp½ce¯VSšLC‚K?qI<gG;cE>_FB]DBW?AN;?H:BE>HGDMHGQIGQHJRGNVKUXM^ZOaYNaXO++++++,,,,,,.,-/.,0/-0/-1-*1-*1-*1-*2-)2-)2-)2-*2,,1++1++0**0**1++1++2,,0**0**0**0**0**0**0**0**2,,2,,2,,1++1++0**0**0**2,,2,,2,,2,,2,,2,,2,,2,,3/,30+30+30+30+30+30+30+41,41,52-63.63.74/85085092,:3+;4,<5->5.>5.>5.>5,B8/B8.E8/E8/G:1I=1J>2I?3FC4FC4JB5OA4TA2\@2b>0j<-q<.w9*}8)…8(Œ:,•=/›B4¤B5²F:ºE;ÁF>ÊG?ÔG@ÞFAçCAîB@í;;ë;;ç>;ßB;ÑD:¿D4¯@-¤>(¦A-¦A-¥@,¥@.¥@.¤?-¤?-¤>/¢>.Ÿ@.œ?.˜?-•>+‘?*>)>+>->->-Œ=,Œ=.‹<-‹<-Š=-Š=-ˆ<.ˆ<.ˆ<.ˆ</‡>/ˆ>1‹?1‘D2–C1¢B4­C6ºC;ÁD>ÁD>»EA¹PL²[T¥e\‘f]u_T[UIGMACI?<92?82>71;6094.74-63.43.43.34.24/13./4..3-.3-.3--3/-3/-3/-3/.3/.3/02/02///-00.22022010.0/-0/-3/,8,,;,)C0*K70S<6^IHtbn‡z”Š¶ŒÆ„ˆÏz€ÌrxÆik¶WWŸID„E=nG<dD<aC>^CAY@CV@DP>EKGQRKWUQ^WU`XS_UR^TT^SY_S^[LaZJaZJ,-/,-/,-/,.-------.-+.-+/.,/.,1-*0,)0,)0,)/+(/+(/+*/+*/+*/+*/+*/+*/+*0,+/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*0,+0,+1-,1-,2.-1-,1-,1-,1-,1-,1-,1-,1-,0,)1-*2.+3/,3/,3/,3/,3/,3/,3/,3/,3/,40-51.62/74/80-92,:3-;4.=4/>5.>5.>5.?4.?5,B5-C6.D7/F90G:1F<2G?4H@5J@6P?5T>3X<1^90b6+m9.t8-|8+ƒ9,;/“=0˜?1ž>0§A3­A4µC8¾E:ÊG=ÔG>ÞE?åC@è@?êBAæDAÚE>ÈD8·B1ªA.¢B,¢A.¡@-¢?,¢>.¡=-¡=-¢>. ?/œ<,š=,˜<-•>-“=,=+Ž=*Œ>*‹<+‹<+Š=-‰<,‰<,‰<,ˆ:-‡;-‰=/†</†</‡=0ˆ>3ˆ@2‰A5‹A4‘E5—D4£E9±I>ºG@»D>»EA¸MG´ZR¯f_£qf‘sh~rdjj^V^SIQFLLBJF=B>5<8/95,74+63,33+43.34.14-14-02-/1,,1+,1+-2.-2.-2.-2./1./1./1./1.02/02/11/11/11/11/11/40/4+0;/3A32C4/J;6]OOymy‹…Ÿ“»”–Ï•Ùƒ‰ÓtzÆjn·_b§Z[”LItHBdA>]>>X?BUAIVLU\U`bbqnn}xv†|rulyoguh_k_W_P]\Hb\Fc]G,-/,-/,-/,-/------.,-.-+/.,.-+0,)0,)/+(/+(/+(/+(.*).*).*).*)/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*0,+0,+0,+1-,1-,1-,1-,1-,1-,1-,1-,1-,1-,0,+0,)1-*2.+3/,3/,2.+2.+2.+2.+2.+2.+3/,40-51.62/80.91.:2/;4.=4/>50>50=4-?4.?4.A4.B5-C6.E80G:2H;3H>5H>5L=6O>6Q=4V;2Z90_7/h70p7.w7-9-‰9.<1–<1›=1¢@3§A3¬B5´D8¾E:ÉF<ÔE=ÛD=ßD@àE@ÞFAÔG>ÄF8²C2¥B-žB-ŸC.žB-Ÿ@.ž?-ž?-ž?-ž>.ž>.š=,™>,–=-”=,=+>+Œ>*Œ=,‹<+Š=+‰<,‰<,‰<,‡;+‡;-…<-†</…=/…=1ƒ=1„>2†@6‡A7ˆB6“G9—E7£G<¯J@¸IB¸GA·LF³TN±d\ªqfŸ~oo|mmseZfZNXMLNAKI=EC7@=4=:188.44,11)23-23-03,/2+/1,.0+.0+.0+/1.-2./1./1./1./1./1./1.02/02/11/11/11/11/11/2015+49-7<23?53H?:^VTxr|Šˆž““¹”—Ê–Ô„‹ÏyÂqy¸kt­hnž\_€XZqSUjRWjT^hZgmfvvr‚tˆ~’‡ƒ•‰~Žv†yr€qfteZeT[ZE`Z@b\D,-/,-/,-/,-/,-/,.-------.-+.-+.-+-,*/+(.*'.*'.*',+),*+,*+,*++)*+)*+)*+)*-+,-+,-+,-+,-+,-+,-+,-+,,*+,*+-+,-+,-+,.,-.,-.,-.,-.,-.,-/-./-./-./-./.,0,+0,+1-,2.-2.-2.-2.-1-,1-,1-,1-,1-,2.-3/.40/51.80.91.:2/;30=31=4/=4/=4/?40?4.A4.A4.C60D71F93G:4H;5J;6K<7N=6P;6S:5V72[6.c60k6.t5,}7/‡9/;0”<0–<1?3 @4¢@3¨@3±C6ºD8ÅE:ÍD:ÕF@×H@ÔIBÌI?¾E:®C3¡B.œA.B/œA.œ?.›>-›>-›>-›>/›?0˜<-–=-”<.“=.>-Œ=,‹<+Š=+‰<*‰<*‰<,‡;+‡;-…<-„:-ƒ;-„<0‚<0‚<2‚>3ƒ?4…A8‡C:ˆD9”J=—H; H>¬KD²KF³LG²SM®`V­sg¦qŒz‘Ž{‚‰ws€ocqbXcUNRDMN@HI;DD8@@49;.46+/1&01)01)/0*/0*./*./*//-//-//-.0-//-//-//-//-//-//-00.00.00.00.00.00.00.1/26+97+98/4;63HE>_^Yzz|‹š”±’—¿•Ç„ŽÃ}‰»{‰¶|‹²}Œ«}ˆšwƒq~‡n}‚n~~o‚~yŽ…ƒ™‹¡”‘¨˜¥”ˆŠƒ–ƒ|{j{i\hTXX@]Y<_[@-.0-.0-.0-.0-.0-.0.......-+.-+-,*-,*.*'.*'.*'.*),*++)*+)*+)*+)**()*()*(),*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+-+,-+,-+,-+,.,-.,-.,-.,-/-./-./-./+*0,+1-,1-,1-,1-,0,+0,+0,+0,+0,+0,+1-,2.-3/.40/91/:20;31<41=31=31=31=4/>3/>3/@2/@3-A4.C60D71E82F93H94I:5J;6L:6N94Q83T50^72e60o6/x8/‚90Š:/<1”>1™?4›?4›?2Ÿ?1¥A2®B5¸D7¿E:ÇG>ËH@ÊJAÃI>¶F:ªB5žA0™@.™A-™A-˜?-—>,—>,™>,™=.—>.•<,”=,“=.=-Ž=,Š=+Š=-‰<,ˆ;)ˆ;)‡;+‡;+„;,„;,ƒ;-€;,;/€<1€<1>5ƒ@7ƒC:‡D<ˆE<”L@–H<žG>§JC®LI®QL­]Vªj^§€o¡yšš‚›ƒ†•€z‹xm{jbm]SZJQUFKO@EI:@D6;=057,13(01)/0(./).-(.-).-)/.,0/-/.,/.,/.,/.,/.,..,/.,..,0/-//-0/-//-//-//-//-2-17,:6*83-1961HJ?bfX{€z‹““£–°Œ•¶ƒ²¯…™²¤¶’¨³“¨«¤£Œ ž‡ž˜‚™}˜‰œ‹ˆ£”°š˜±›”­—‹£…›„’|k|iXfOSV;ZV9^Z=+/2+/2+/2+/2-.0-.0......------.-+-,*-,*,+),+),+),*+,*+,*++)*+)**()*()*(),*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*++)*+)*+)*,*+-+,-+,.,-.,-/-./-./-./+*0,+0,+0,+0,+0,+/+*.*)/+*/+*/+*/+*0,+1-,3/.40/901:20;31<42=32=31<20<20=20=2.?1.?1.@2/A30B5/C60D63C84D95E:6G96H94K84N50X72_60i70r7/}:1†<1Œ>2>2—@6—?5—?5—?3œ@3£C5«C6³E8ºE;½G=¾H>¹G=°D8¦A5›?0—@/—@-—@-–?.•>-”=,•<,–=/–=/•<.“;-’</Ž<.‹<-‰<,‰<,ˆ<,‡;+†:*†:*†:*ƒ:+ƒ:+‚:,€:.€:0€<1€=4?6‚B9ƒD=‡F@ˆH?‘KA’H=šG?£LE¨PL¨XQ©f]¦vh¢Œw›™€•¤‡Œ£‡†ƒ~‘}t‚qjue\eRV_LNUCEL:?F6<@27:/68-01)00(.-(/,'/+(/+*1-,2.-1-,1-,1-,1-,1-,/.,1-,/.,2.-0/-2.-0/-0/-0/-0/-2-18,:5)51++66,GL8`hQzƒpˆ’‡—–š ™¥†–£‡›¢ª©›¹± À³˜·¨š¶§›·¨˜·¥‘±œ‰«’‰«±”’³–•´•­ˆ¢…„›{’xgzdTbIQT9VU9XW;,03,03,03,03./1./1//////....../.,.-+.-+.-+-,*-,*-+,-+,-+,,*++)**()*()*()+)*+)*+)*+)*+)*+)*+)*+)*,*+,*++)*+)*+)**()*()*(),*+,*+,*+-+,.,-.,-/-./-./+*/+*0,+0,+/+*/+*.*)-)(0,+0,+/+*0,+1-,2.-3/.40/:12:12;31<42=32<21<20;1/=20<1/>0->0-?1.@2/A4.?4.@51@72@93A:4B94C84F74H5/Q51X5/a6/l8-u9.€</†>0‹=1“?5•>5“?5“?4•B4šB4 C4¥D4¬B5°D8´E:±E;ªB7¡?4š>1–>0•?.”?+“=,“=,“<+“<+”<.”<.“;-’<-<.;-Š;,‰<,‡;+‡;+†:*†:*…9)ƒ:)ƒ:+9*9-9-€<1<3?6€A8‚C<…F?ˆIBŠICŽJAG>—HCŸNJ§VR§`Z©pe¤ƒrœ”}–¡ƒ¨Šˆ§ˆƒ „~–~yˆup{jdp\]iSR^JJS@BK:>E5:@29<134,22*1.)/,'/))0**1++2,,1++1++1++1++1++0,+0,+0,+1-,1-,1-,1-,/.,/.,/.,2,.8*75(13+(56&EK1\gGu‚d†“yŽ›Š‘ž”Ÿš‹ž˜¥——´ž¢Å¥©Î­¥É­¦Ê°§Ë±¤È¬—¾Ÿ‹³‘ˆ°²Ž²Ž²¬Š„¡‚€™{wŽrdx]Q_ENR7QQ5SR6,03,03,03,03./1./1./1./1/////////////.,/.,.-+.-+/-..,-.,--+,,*++)*+)**()+)*+)*+)*+)*+)*+)*+)*+)*+)*+)*+)**()*()*())'()'(+)*+)*,*+-+,.,-.,-/-./-./+*/+*/+*/+*/+*.*)-)(,('0,+0,+0,+0,+1-,2.-40/40/:12;23;23<34=32<21<21;10<1/<1/>0/=/.>0->0-?1.>3/=60;60;83<94=:5>93@72C60G4.O4+Y4+d5+n8,x:-;.…;.<4‘<5>3@3A2“B1—A2™@0 >1¦@4ªB7ªB9¥@6Ÿ>5—=2•?2’?-’?-‘>,=+‘;*‘;*’<-’<-‘;.‘;.Ž;-;-Š;.ˆ:-†:,„;,…9)…9)ƒ:)‚9(‚9*9*~8,~8,€<1€=4€@7B9„E>…IAˆKFŒMFŒIAŽH@˜JF¡SO¨]X©hb©{n¤Žy™œ’§†‰¬‹‚ªˆ€¡„™€~‹wxnjxadr[ZhQQ]IITCCL;>D6<?467/44,30+0+'1()1()2)*4+,2)*2)*2)*2)*2)*0**0**0**1++1++0,+0,+0,+0,+0,+1+-6)25)-4-%46!AH&Wc;q€W‚’mœ} †¢Œ‹¡Š¨‰•¸Ž È”¤Ð©Ó«¨Ò®§Ñ­¡Ë¥“½—…¯‡‚¬„‡°†ˆ®…Œ±ˆ‹«†Ÿ{{”tqˆk_sWM]BIO3JM0KK/./1,01./1./1.0/.0/.0////00.00.00.0/-0/-0/+/.,1-,2.-1-,1-,0,+/+,,*++)*+)*+)*+)*+)*+)*+)*+)*+),+)*+),+)*-(,*(),())'()'((&'*()+)*,*+,+)-+,.-+/.,/.,-,*-,*/+*/+*.*)-)(,(',('1-,2-*2-*2-*3.+4/,50-61.;31;31<42<42=31<20;1/;1/<1/<1/=/.=/.=/,>0-?1.=2.=4-=6.;819919:29:2;81?6/C2+J1,T2)^3*g7+o9-u=.z</‡=2‹=3‹?2Œ@2Ž@3@1’?1•=/˜</œ>2¢B6¡C7žB7™?4–>2”>1”>/“=.=-<,Ž=,Œ=,Œ=.>/Ž<.Ž<.‹</Š;.ˆ:-ˆ:-†:,„;,‚:+‚:+:*~;*~;+|:*}9,|:.€>2>5€@6‚C:ƒG=…JB‡NE‹OGŒICŽID“PJ˜\Tžg`uiž‡už˜€”¡…ª‰‰¬‹ƒ¨‡€¡„~›zytˆoi}bby]\pUUgOO\HGRAAH8=A388.85.7/,3+)2()2()3)*4*+0*,/+*0*,0**0*,0*,2),2),3*-1+-1+-1+-0,-0,-0,-1+/4)/4*+4-%46!?F%T`8m|Qg‰™tžz¡~ˆ¡zŠ§{‘¶‚›ÄˆŸËŸÉ™žÇÆš˜Á•Œ·Š‚­€…®‚Œµ‰„«‰®…‰©‚~œxvolƒfZnSJZ?GM3FJ1DF./0+.0+/0+01,01,01,12-21-32.43/43/62/51.41,3/,4/,50-50-4/,3.+2,,1-,0,+0,+.,-.,---/--/,,.++-*).))+.)/.)-/(/.)-/)-.)-.*+.*+/+*/+*-,*.-)--+-.)./*./*------.,-/-./.,0/-2.+2.+2-*4,)5-*6.+8/*:1,:1*;2+=4-=4->50>50>50=4/<3.;2-=2.<1-<1/;0.=/.>0/>0/@1.A0)@2);4*77-39-28.56.:3-?-)F*'L)'S*&Z/(`5,d<0k@0yA0@/†A1‹B3@3“=0“;/’8-“;/“=.”A1•B2”C2’A0‘>.‘;,—;0—:2’;1Œ=0ˆ?0„?/‚?.ƒ>.ˆ@1ˆ?0Š>1Š<0‰;/ˆ:.†:-ƒ;-{9+~@3w<.q7)w>-w>-v;-}?2{;/‚@4‡E9‰I?ˆLA†MB„PC‡NE‘KI—SP”bY‘paŒ}j‰‰q‰–|Šž‚¤‡¦‰Ž§Š§Œ‡¤ˆ~Ÿ‚uš{o—uiib„_[zXZsUZnSWeNPWEJK=C?6@93;0.6**3')3'+3'+1&*,*-)+***,*(),'+.(,1(-2'-3(.3(.3(02(00)10)1/*1/*0/)-1++0-(//#<?*V\@pzX‹gœu‹sŒ¡vŒ¦wŠ¨v‰ªuŽ´{™¿†ŸÁ¾–ºŠ³ƒˆ®}…«|ƒª{…ª~ƒ¨}ƒ¦~€ž|y”ur‰mh|cYkUMZFIQ<CH4?B//0*01+01+01+12,12,21,32-43.43.74/74/63.52-50,50,7/,7/,6.,6.,3.+2-*0,+0,+0,-/-./-0--/-,1+*/)*.)(-.)//(//(//(//)-/)-.*+.*+/+*/+*.-).-)./*./*./)./*.....0....../.,/.,1-*3.+5-*5.(7.)8/(:/);0*<2)=3*>5,>5,>5.>5.>5.=4-<3.<3.=2.<1-;0.;0.=/.=/.>0/@1.C0*C0)A2+>4+:6-95,:3-<1-?-+D*)I*(N+'T/)Z5-_:1e>/pA/xA-€A0ˆ@2?4‘=3“:2“;19.‹</‹>.Œ@0A1A1ŽA/‘?1•;2•;2<2‹=0†>0ƒ@/?/‚?.…@1†>/‰=0ˆ<.‡;.„;,‚:,€;,x8,x<1s9-n9+s>.s>.r8*u:,}=1ƒA5‰E:‹I=‰K@†NA„PC‡NE‘JH—SR’f]Œwf„†p€“wž„¥†ˆ§ˆ§Š§§Š¤‰Ÿƒwœ}o˜ve’i`‹`Y‚ZY{X\wXZnSSaJNUCFH;C@7<737/-3*+2)*1(+.(*,*+**,+),+),-(,/)-2(02(02(02(02(10)1/*1-*3-*3-*12-12.-0,)--%8:,SXBox]€‹i‡–o†™l†žnˆ£p†¤p„¥pŠ­w“¶€™¹‡–¶„“³Œ®{†«x‚¨w‚¨yƒ¨|ƒ¦|‚¤{x’uqˆnh{eYjWMZHEL<@D5;=/12,12,12,12,23-23-43.43.54/54/85085085074/72.61-80-80-7/,6.+4/,3.+2,,1-,1-./-.0.1/-0--/,,.+*/+)./(/1'//)-/)-/)-/)-.*+.*+0,+0,+/.*/.*/.)0/*0/*0/+//-///0./0./0/-/.,1-*2-*6.+70*90+:1*<1+=3*>4+?5,?6-?6-@7.@7.?6/>5.=4-=4-=2.<1-;0.;0.;0.;0.<1/?1.C2+E0+H/+K--L,/K+.I*/E+.A-,@.*A.(E.(M.)X1*b3-g5,j:,o;-w;0=4‡<6Œ<5:4:4Š<2‡=2†>2…?3†A2‰A3ŒB5C5Ž?2=/Œ>1Š>.‡>/…>,†=.ˆ<,‰;.‰<,ˆ:-†:*ƒ;,<)~=+{<+}=1z<1v:/u;/x@1x@1v<.v;-?5‚B8‰F=‹H?‰JA‡KA‡NCŠNF‘JH˜TQ–f\ve‡…n‚‘t{¤ƒ…¨‡ˆª‰ªŒ©ŒŽ¥‰ˆŸƒš}y˜xi–ma’e\‹a\†`]‚`[|]UrVPhPFYEBP?:D93:2.3,*/)*,)**(0'(1&*1&*1&*0'*1(+0*.0+//*.-+.,+0+,0)-0(-1(-1)-01/23/..*'**"57*PUAmv[|Ši€k~“j™jƒŸn€ n~ m€¥q‡¬x¯|‹­zˆªx„©v§v§u¦w¦y¤y€¢}}›yw‘tp‡mh|cYkUMZHDH9=?299-23-23-34.34.34.45/54/54/650761961:72:72961940940:2/91.91.80-50-4/,4..4..3/03/01/01/20.1..0--/-+.0)02).0*.0*.0*.0*,/+,/+*1-,1-,0/+0/+10+10+10+10,11/1111/010.10.2.+3.+3.*92,92,;2+<3,>4+@6-@6-A7.B8/A8/B90A8/A81@70>5.>5.=2.=2.<1/;0.;0.<1/=20=2.B3.E2.L..R+0V'/U&.P'/I).C/.<1+;2)?2)G0(R/)_.*d/)i9/k;/u<3}<6…;8‰;9Š;7ˆ:6‰>8†@8†B9…B9…C7†B7‡A7‰A5ˆ@1ˆA/‡@.‡@.‡>-ˆ<,ˆ;+‰:+Š8*ˆ9*‡:*ƒ:)<){=(x>(x>*‚>1{7.z7.z<1v;-w=/|A3{@2€B7ƒE:†H=ˆJ?†J@‡MBˆODŠQHŒSJŽ\QŽh[‹tb…g€‹m~–vž|ƒ§ƒ„©‡‡ª‰‹ªŠ‹¦‡‡ ‚ƒš~}˜yq•oi”ifgfŒeg‹gd†e_~_Zw[PhPK^JBP?8D62:/.4*,/(+*%2&&5%(4%(2&(1'(/)+/+,.,-+++*+-*+-(,-(,/',/',/*+-.*+1++0+'.+"88,PUAiqYv„c{Œhyh|–iœl}Ÿmyžkz m¥r‚§t€¥q}£p}£p}¥s~¥v~¥x}¤x|¡x}Ÿzz™wuqn‡je|bWkRN[GDF9?=1:8,45/45/45/560560560761761872872;83<94<94<94<73<73<41<41;30;3083072/61.61.5106216213122011/00./1-.2,04+.4+.4+.2,.2,,2,,2,,3/.3/,3/,3/,21,21,32-32.32032032032051051.61.61-;4.<5/=4-?6-A7.B8/E8/C9/D:1D:1E;2D:1C90B8/@5/@5/>3/>3/=2.=2.=20=20>31>31@51E31M02T,4X)3W(2R)1K,1B30:6-77+:6*B4)M2)X/)^/)f:1j;3s<7z=:‚<:†<;‡;;†::‚;7>8A8B9ƒC:ƒC:…@9„@7‚C2‚C1ƒB0„?/†=.ˆ<.‰:-‹9-‰7+‡8+…9+‚:+~=+x>*v?*x>*9-|/'‚8/„>4w4+s5*}A6}C7E:€G<‚I>ƒJ?„KB†MD‡QG…WJ|aNzjQ€pYu]‚|bƒ†i†“uˆ|ƒ£~§‚‚ª…‚¬†©„¥€{ž}z™wz’pzlxlwŒkumr‰lm„gkd`rX[iRR[HHL=@@4;7,70&5*$6('5''3''1'&.)&+*(++)+-*',('+*)+*)+***,+),+),-)*,#$2*'50*86*BC5UZFfpWn}^tˆeqŠbuex˜iw›ks™htšiwŸkz¢nx lwŸmx ny£s{¥u{¥w|£wyžuzœww–tsŽom†hd{_WkPN[GCC7>:195,560560671671782782872872983:94=:5>;6>;6>;6>95>95?74?74>63=52;63:5294194184184395484373243151240/6-06-.6-06-.4..4..4..4/,40-40-40-51.32-32-43.43.43/431542540841850940:5/=60>7/@7.A8/C90D:0G:1H;2F<3F<3F<3F<3E;2C90B71A60@51@51?40>3/>31?42@53?53@72C52I35P16T/6S.5P05J22C52=90<:-=:+C7)I6(Q3)W2)]2+d3,l50v64}77‚87ƒ77‚66~75}:4}<6}>5€?9ƒ@8†?9…A8€B3€C1B1ƒ@0…=/‡;.ˆ:.‡9-…9,ƒ9,‚:,<,|=,y>,x?,|=,‡5*‹2,¡LE§XQ‹A8|90‚F;€K=yH:zJ<{M>|N?}OBQE‡UJ‚_LrkOosR|uX‡w]yb˜iŸ‹s ”z––z|‹£ˆ¨…§‚€¤~{Ÿy~™vƒ‘p…ŽoƒŽp€pp{ŽpwŒms‡kj~bfv\_hSV[GOM>GA3@6*=0';,'9+(6+'3+(/,',-'+.').().(+-(-,*/+*3)*4(*7'*7'(3($<3,E>4IG8QR@]bKgqVjyZn‚]k„\l‰]p‘bq•eo•do—eršfuŸmrœjq›itžnx¢rz¤vy¢vyŸvvštw™vu”rokj…fc|^UlON\ECC7@91;4,671782782782893893983:94:94;:5>;6?<7?<7?<7@;7@;7B:7B:7A96@85=84=84<73<73<73<74<74<74;639529338308/09/.8/080.80.80.61.61-61-61-52-52-63.63.74/74/540540841952:63<94=84@93@70A8/C90D:0G:1H<0I=1I=1J=4J=4J=4I<3F<3D:1B8/A7.A81@70@72?61?61@72@72A83?74@85B86D97G96H96H96H94E80E8/E9-E9+G9,I9*K9+Q7*Z/&d/'n3-z63ƒ98‰;9‹;:‹=;‹A>‡@:‚=6<3:3‚<4ˆ=7‰@7ƒA5B3‚@2ƒ?2ƒ=1„<0;/€</~<.|=.{=.|>/|>/}>/=/†9/1+¢<8ÍlfÙ~y­ZTŒC<ˆLAN@tJ<qM=pQ?qR@tS@zWD‚[J~eOmsOo{U„y[˜u_©oc¶mf¾qk½wo»‚w±Œz§—~žŸ€–¡¡~…y…™vˆ‘r‹rˆ‘r„“r€–r|–sx“pt’pm‹ii„edx\]kQV^GMP;ED0B;+@3+?2,;0*70*30)00(./'./)/0*2/*6,+:*+>(+C&+E$+C&(F5-LC4VQ>[YD`bJgmQiwVj{Wl‚[g‚Wf†WlŽ\o”an”an–bršfsko›jo™irœnw ty¢xxžwu›vs—su—vs’rn‹li„cb{[TmMM]CGH:E<5@707827828938938939:4:94:94;:5<;6?<7@=8@=8@=8A<8A<8C;8C;8C;8B:7?:6>95>95=84>95>95>95>95=85<73:51;30:0.:0.91.91.91/91.91.72.61-61-63.63.63.74/74/74/540651952;83<94?:4B;5B;3A8/B:/C9/E;/H<0I=1J>2J>2K>5K>5J=4J=4F<3E;2C90B8/B92B92A83@72@72A83B94A:4?82@93B;5D=7F=6G<6K<5N;4M6.N6,Q6+Q6+Q7*P9+P9)V6'f6*r6,~;3‰@9•D@›HDŸJGŸLF QJ™LDŽD;…;0„7-…7-Œ91=4ˆ>5‡>7†=6…<5…<5=4}=3z>3x@3vA3x@3z>3<3ƒ:3ˆ73‘31˜(&³=;ì|zý•’Åhc–G@‰K@xH:nM<jQ=fT>hV>lX@t[E`L€hPysQ„wUžt\´l^É__ÓV\ÙQ[×T\äouÙzx̆|À~µ•€«•}£’xŸvœŠrœŠt™u•u‘‘u‹’s†‘s‚‘r|‹ny†ju{amoWgbN_TBUE5R</O4-M1-I0,D/*>/(9/&7.'6/'81):/)=.+A,+F)+H(+K'+H)'TB4YQ<d^FgeLilOnuVm{Xl~Xk„Zg„Vg‡Vm]p•bq–br™duit›lo™ko–jr™mwvyŸxwšyt–us”uu”usqoŠki„ea|[TmMM]BMN@KB9F=69:49:49:49:49:4:;5=<7=<7=<7=<7@=8@=8A>9B?:D?;D?;E@<E@<E@:D?9D?9C>8E>8D=7B;5B;5B;5B;5B:7B;5A:4A:4A83A83A83@72@64>71>71>71<71<71;60:5/85.85.74/74/961961961:70<71=82A:2B;1C:1D<1F<2J>2K?3L@2N@3N@5N@7N@7L?6K>5I<3H;2E;2E;2B90A8/@91?80?80?80@93@93<5/MD=M@:K:3T@9R62O0+a<6\3-`5.`4+^/'^/%f6,m=1q=0‰I=G;—I?ŸKAŸF>›>7š=6žD;¦ND¤PE¨VJ«YK¥OB™A5—;0›>6“98‘98Œ65†52†84„?8|@6r>1rB4oA2q=0v:0‚72Œ43’-1š',ÈHIèbaÅEDÍWUáyv«VO†F<„VFmR=i[AibFjeHj`En^D|dLjT’bL²m]ÑnhÛX]à;Lç-Eò+Hõ0Lö@YìI\ä[eånrâ{|Û€}Ûƒ؉‚Ãv½wº„x¶†x²ˆx­Šw¨‹y¥Œxš€o™~m˜xi“oabY„UM{IBxA>u:<i.2d02a11P&'G%#L0-M51G4.E2,D1-F1.F.,G+*K--Q6/YH4`W:f_BgdEkoNu|Zu„]oYlƒWl‡Zp]r’as•bu—dw™fv›hr–js˜os—qq•os•tw™xz˜|y–zx•ysrm‡jk„fi‚dazZTmMO_DNO?SK@PG>9:49:49:49:4:;5;<6>=8?>9>=8>=8A>9A>9B?:C@;D?;D?;FA=E@<E@:E@:D?9D?9E>8E>8E>8E>8E>8D=5C<6C<4D;4C:1B92B92B92B92A83A83@93@93>71<71;60;6096/85.74/74/96196/96/:70<71>:1A:0B<0C;0E;/I=1J>0L@2L@2N@3N@3N@5N@7M?6J=4I<3H;2E;2E;2C:1B90@91@91@91@91A:4B92D93I81L/+V.,j76u99{;;…ECƒD?„H@…IA†G>ŽIB™NH¡PL¢OG“D7”B4šB6ŸC8 >3œ7-œ7-Ÿ=0£C5›?0™@0 E3¤G6§F6®H:¶NE´LM¯HL¥@D™9;‘98>:ƒ@8x>3o>0zI;…LA„?8„,+’).³9DÒLWÜKNßMMÊ>=À@?Ð`\³YQ„@5‚TDyaIe[@^]?ihIslOvgJ~dK–cN¼dXÖ_[æUZëANò,Eþ%Dÿ&Hÿ'Iÿ.Nù3Nò<RðIZëP^åQ]ãS]àXbÛbiÕflÔjnÒmqÏqrÍutÉxwÇywÊ||ÉyzÈvxÇqtÆkrÅfnÅakÃ_kÅ`n³S_¥KUšGQDK†EIm69HT1-M0*H1+J6/K81K:2O>6UE8[O5cZ9gaAifEnrOz‚]z‰bt†^r‰_p‰_p‹`qŽ`u’dw”dw”dw”fs’ix–rz—xy–x~˜}ƒ„…‡ƒ›…™ƒz’zr‰om„hhd`y[TmMNaERSAVPBUOC8938938939:4;<6<=7?>9@?:@?:@?:C@;C@;C@;C@;D?;D?;FA;FA;FA;E@:E@:E@:G@8F?7JA:I@9H?8G>5F=6E<3F<3E;1D:1D:1D:1D:1D;4D;4D;4C<4?80?80<71;60:5/:5/94.94.96/96/:5/;7.>7/@9/B90C;0E;1F<0I=1K?1M?2M@0NA1M@0P?5M?4L>3K=2I<3H;2E;1D:0C:1C:1A:0A:0?;2@<3@<3D;4UD<R3.j23ŽAG­LWÃU`Ë]fÆ_b›B>—I?–LAœNB¬RJ¾URÌOSÄLK¥@4B0 @0¥?1¥;.£7+¤8+§=/«E6¡>+˜7$:'¥>-¬A/²C2¶D:§02¯:B¹DL½LRºMR­KL–A>‚71{8/v6,x2*„1-œ37¹=GÕGWèM[âFIÏ53Ð:9½31ÈNKÆc]”J?Œ[J}cLj_CgdEtoOpQhJhN°hYäbbõQZôDQö7Iý1Jÿ2Nÿ/Mÿ*Hÿ2Oü0K÷1Jõ5Lò4Mð2Kó3Ló7Pò@XïC[îF]íIaëNcêQeèUhèVkåSjäRiãOiäNiçNlëPoòSsóVuþh…ña|å[tÕUlÍYlÉdr¨R]r-2^&'Y0,W:4Q?5B:-:8)>B1LN9VO3aV6e_?heDquT†e~ŒiwˆdxŒiu‹er‹dr‹cvŒeyhzizj€•v„›~Šž… Š’£—¨–˜©™–¦™‘¢’‡˜†zypƒmg~b^wYTmMPcGSXDXUDYVG7827828939:4;<6=>8@?:A@;BA<BA<DA<DA<DA<DA<E@<E@<GB<GB<GB<FA;FA;FB9HA9HA9LC<KB9JA8I@7H>5G=3F<2E;1D:0D:0E;1E;2D;2E<3E<5E<5@91?80=82<71;60:5/:5/:5/96/96-;7.;7,?8.@:.C;0D</F<0F=.J>0K?/M@0M@0M@/M@0O?2O>4L>3K=2J<3G:1E;1D:0D;2D;2B;1@<1@<3A=4B>5F<3S81[*&‰:?¾T`ÙTeæUfãUcËJOŸ30–:/‘>0™A3®F=ÅIGÕBHÍ>@±B7§F5©B3¬@3¯?3°>3³B4´D6²G5©B/£<)¤;(©<(«:(®6&­3(¶97º9=½7>¼7<¿<BÆJLÄTS¾XS™?7Œ4*‰,%61ÃHKÜOWâAQÛ3@Þ:9Í.*Ó84È74ÆE@È]U©WKWFwW@veI~pSpQ„fJdK©o[ÕuiîSWüDP÷;Jø9Iþ=Nÿ@Qÿ:Lù4Hÿ?Sþ9Mú4Ký3Ký1Jÿ/Iÿ0Nÿ6Sÿ3Tý4Vý6Wú7Wø9Zø=\÷>^õ@aøCfö@fõ?eõ?gø?hüCmÿErÿIsÿOuÿQuþUvòSqçTnåaxÖfv·Wb}15j0/X1*P8,G>/>A.;D/?G/PK._T8g`CokN||`ˆŽr‡‘v}‹qzq|s|szozŠm}Œoƒ’uˆ—z•£Šœ©•£®¦±¡¬´§±¹®°·°«µ­¡«¢” ”ƒ‘‚s„qh|c]tXSlNPdHRZCWYDYZH671671782893:;5<=7?>9@?:BA<BA<DA<DA<DA<EB=FA=FA=FC<FC<GB<HC=HD;HD;JC;JC9LC:KB9KA8J@6J=4I=1H<0G;/E;/E;/E;/E;1E;1E;1D;2D;2@9/@9/@91?80<71;60;60:5/;7.;7.;7.<8-?8.A;/C;0D</G=1G>/K?1M@0M@0NA0O?/O?0O?2N=3N=3J<1I;0G;/D:0D:0D<1D<1B;1@<1A=2A?3B?6K=4\5.w32­LSÛ]iæM_å@Q×6E·&+¨1)7(’:&—<)¬@3ÃD=Ô>?Í;;±?5¨B4ª@2­?2²@5¸C9¼H;»J<¬>/ª?/¨=+¦;)ª9)°:,·;/¼<1ÊFAÎDAÐ>?Ð79Ö7<ÞBEâLNÝROÄC>ÆKCÍTLÔSMÙKJÛ?Bà5>á27Û4.Ú7.Ð1+Ï:4¿84³@9µ[P–UC{N9‚bI†kP„`F’[F­fTËrdçmhêEKò:Dê9Cç<DçBHçFKèGLêFMôJSòBMò9Iö5Hù2Gý/Fÿ2Lÿ8Rÿ9Vÿ9Xÿ:Xý:Zþ;]ÿ=_ÿ@bÿAeÿCiþDkþDmýBmüCoüCoüBqýBoÿGpÿ@hÿGmÿMpòIhéOkå[rÙcs½YcŽ?D`&$Q+"V@3VO=IL7@D-RJ3eYCujV€{gŽy™œ‹•œŒˆ“ƒ‚Ž€‰—ˆ›Œ™ˆ‡’‚Š“‚—žŽ¤¨™²¶§¸¼®¿Á¶ÀÁ¹ÂýÅÆÁÃÃþ¾¾°µ±¢©¢—Œy‡vi{e\sYTmORfJQ[BUZCW\F560560671782893:;5=<7>=8@?:@?:C@;DA<EB=EB=GB>GB>GD=GD=HC=ID>IE<IE<KD:LE;LC:KC8LB8KA5L@4K?3J>2I=1G=1G=1F<0F<0E;1E;1D;2C:1A:0A:0@91@91=82<71;60;60;7.;7.;7,<8-?9-A;/D</E=0H?0J>0L?/M@0NA0NA0O?/O?/O?2N=3M<2L;1I;0G;/F90C9/C;0B<0B;1@<1@>2A?3B?6N;4m84—FEÄY_ÛWbßCQÞ8FÔ3;½++­1'¡8%˜:!—9 ¤;&¶>.Ã:2¾71§7,¢:-¥9-§7,¯:1¸B8ºE;·E:®>2­?0§<,¤6'ª6)¶>0ÃD;ÊG=¾8-Î@6áD?ìBBô=Aó9>ë27Þ.0Û75âGBèSLåNGÜ=9Ù10ã/2ê67Ù1(Þ</Í,"Ð71¾3,°7/Ég\¸l\ŽWC‡ZCƒV?‰R=©\LÎlaágbäTTðEKñ=Fä;@Ù=>ÒA>ÒGBÝOMëWWíNRïDMð:Gö5F÷2Fø.Dû1Gþ7Nþ8Sý8Tý8Vþ9Wÿ;\ÿ>aÿAeÿCkþ;eý<hý>jý?mú>nø>oô=mö:jÿHrÿ;aÿ?dÿKnÿKn÷NmïUoãZnèr‚Âaj˜ILt:8\6-P9+PC2UM:^QAreUˆ|n•‚Ÿ‘¦§Ÿ¡¦Ÿ–œ˜•ž›ž§¤¦¯¬¦¬¨¢§£¦¨£µ´°ÂÁ¼ÌÉÀÑÎÅÕÐÌÕÐÍÔÎÎÕÏÑÑËÏËÆÊ¿½À°²¯˜Ÿ˜€Œ~m~k`t[WnRVjNS`FV`EX`H560560560560671893:94;:5=<7>=8A>9C@;DA<FC>HC?HC?GD=HE>ID>ID>JF=JF=MF<MF<ME:LD9MC9MC7NB6MA3N@3MA3JA2JA2I@1H?0G=1F<0D<1D<1C:1C:1A:2@91?82?82<71<71<8/<8-<8-<8-@:.A;/D</E=0H?0K?1M@0NA0P@0P@0O@-O?/O=1O=1M=0L</I;0F:.E8/C9/B:/A;/A:0?;0?=1@>2@@4P91r1/¨JKÁSV»>D½06Â03Á//º1)©1!£9#œ=!™;›< ¡=#¥;%¤6%ž6) 8-¢6,¥4,­81·@:¸C<²@6±B7­A4¨</¦8+¯:0¼C8ÃD=Å@7Ã>-Ï>-Ù5+á*&í"%ú%+ÿ*1ÿ.4í)*ç.+á3,ß4,à3,ã2,é0-ç2+Ú2%Ö6&Ð2&Ï7,Å6.½>7È`UÒq¦eSVBŠM:£WIÈf[ßd_çRTèCIõFMí@Dß??Ô@<É@8Æ@7ÑFAãMLïJNô@Kù9Hý7Hü5Hø3E÷6Gú;Mú8Pü7Rû6Rý6Uÿ6Xÿ9]ÿ;aÿ<gÿ>kÿ?mÿ@qÿBtÿBuþBuüBtùBpÿFmúAaþEeÿKjþKkÿVtÿ_zõ]tòj~æp~Óow®^aƒCAg6/hB7sUJye\Œ}v£–­£¡²®«¶¶¶²¶¹ª¯³°·½¶½Å½ÁÊÀÃÊÃÂÊÉÆÍÕÎÖÝ×ÛâÚØçÝÛéÝÝæÚÜåØßä×ààÔÞÙÏØÊÅ˺ºº¢§£ˆ’‡t‚qexb\sW[oS[jM\iK]gL561561561560561671872983<;6=<7@=8B?:DA<FC<GD=HE>HE>HE>HE<JF=JF;KG;KG;NH:MG;MG;ME:MD;MD;MD=NC?NC=MC7MD5KB3JA2H>2G=1E=2D;2C:1C:3A:2A:4@93?74<73<71>7/>7/<8/=90>:1A:2C<2D=3H@5I?3L@2MA1NA0P@0O@-O@-L?/L>1M=0L;1J91I81E80C90@9/>:/;;/<<0=>0>?1A?0S8-‡<7Ä\[ÊZY®86«.*²1+®.%­2#¬9&¬B*ªF,¦D'£A&£A&¢<#Ÿ9# 9*£;0¦:0¦7.­<4¶C<·E;°@5«=0¨</©;.¬<0»E9ÆLAÅE<¼8,¿6$Í:(Ý;.æ3,ñ+*ù(+ý&+û%'ø**õ.+ï2,ë4,è3*å3)ä2(à3%à:*Ñ2Ü?0Î6)È8-Â?5³A6Ñl`¿gY¥RB¨OAËcZçhbæRRêAFóBJë>Dá;=Ö<<Í@9Á>4¶8,¹6.Ä94âHHé@Eð;Dö:Hú:Iø8G÷;Iû?NþAUÿ?Vþ<Tþ9Tÿ8Uÿ9Zÿ:^ÿ;cÿ>iÿ>lÿ>oÿ>pý>qú@rø@t÷Aq÷CjÿMmÿSs÷Jhë@`ýTsÿg…ÿe‚÷]wï_xçh{Üp}Æqx§gg^X{ZQ—~wª™’¾°­Ä¼ºÆÂÃÈÇÌÇÇÏÃÃÏËÊØÌÊØÑÊÚ×ÎßßÔäæÛéêàëíãëïåæòèæôèèðäæîáèíàéêÝçäØâÑÊÑÁ¿Â««©‘–z†xl{hbu_`rXbpVboScmT21/320431651875984984984;:5<;6==5??7AA9CC9EE;EE;HH@HH>HH<JH;KJ8LK7ML8NK8MJ9JF:GD;JFCNIMNIPGDOD?ENE>LC4J@4KA5MC9LB8F=4B90E<5C:5@93?74@85?75<74<42C:5B94A96>95?:7>:7?;8@<9B?:D@7G@6J@4L@0O@-O@+L?,G@.F?/I;0K81M53K65J88F;9B?:6904</9D4:A/69$?=(bC1¼j^¹JA¦7,¥5)§7+¥5'¥7&¨=+£8$¥<&ª@*­@)¬=)¬9&®6%«6%¤6'¡7)¢8*¦<.ª@2¬B4¬B2¬A1©>,«=,­<,³=/½C4ÄF8À>1º2&Ç9+Ì8*Ð8+Ö8-Û7-â5.é3/î1-ñ.,ô.-ó0,ñ1,ê5*ã7)Ý:)Û:(Ü9&Ô3Ð3 Ï8'Æ7'¾6(ÂB5ÏSIÈNCÏSKá\Wî]ZðPRí>Cò9?÷?GêAFßCDÕAAÈ?9»<3±;/°</²<0ÊL@ÔKCÜGCá>?ë<A÷?Gý?Iù;GþDQüCQþDRÿDUý@Vü<Uÿ<ZÿBdÿFkÿAjú;gõ:gö<mùCsýIyÿKzÿMyÿMtøPsðOpçMiêMjüYxÿgˆÿ_ƒõGlöWwè_yÃ^n½{‡a^xp§‘„»§œÑÄ»ÝÖÐÝÜÚÜÛàÞÜçâÛëæ×ìëØîñÙñöÝó÷âó÷çôõëôôîòùôñùôðùñïöíîóèìîãééÞäæÝâÖÐÔÍÉÊ»º¸£¥ ‹‰yƒxr}op{k}†sxlv}k0./1/0320542653762873872:94;:5==5??7AA7CC9DD8EE;HH>HH>HH<JH9KJ6LK6MM5NM8KJ8KI=KJEPPRWU`YXjVTjRO`OIKMD?H?:F=8G>9H?:F=8B;5D:8A96?74?74@85@85=85;62=4/=4/=52<74=96>:9=<:>=9B?:D?9G@6J@4M@0O@-P?+L@*B?,B?.F<0H:1J65I56F35@65@<9:=6;>5@@4E<-J9)^B4€L>®QB«;- 2#¡6&£:'ž7$ž9%£>*¡;%§<(®?+³@-¶=,·9*¸6(µ7)ª9)¥:*¤9)¥;+¨>.«A1«B/«@.®?,«:(±<+¿E6ÆH9Á?1¼8+À6)Ë7+Ï7,Ð9.Ñ;-Ô</Ø:.à8/ç4-î1-ô.+ô.+ñ0+ê4)á7(×:'Õ:$Þ<'Ù6#Õ8%Ô=*Ì;*Á5&Ä:/ÏF<ÑF?ÚIDéOMóPQôGIð;@õ:AøCHåBEÚDCÒBAÅ>8·;1®:-ª<-«=.¶E5ÆL?ÔNEÜGCã?>ï?Bú?Fþ@JøCJ÷CLúDPÿFTýBSù>Sü>XÿBaÿFhÿCiü?iù@jùBpüFvþJzÿK{ÿJzÿHtõKpñQsõ\zù_{ûXwüNqýEkúDlïEiÚKgÈ_p±nukLI~t°–‰Ì²¥äÓÉìãÜëçæêéîêçòíâóöãùûáúÿâýÿçÿÿìÿÿòþÿöþÿùûþú÷ýúõü÷ôúõòøïðôëîñèíïæëæÝàÜÖØÊÆų²®ž¡šŽ“Œ‰…ˆƒ•‡‰€†Œ~/.,0/-10.21/43/540762761:94::2<<4>>6@@6BB8CC9DD:IF=IG;JH;LI8MJ7NL7NL7OL9KI:NKBTRS_^fihxmm…lkŠkhƒ`YiYQ\OGRH@KH>GG=EE<A@:<C:;?:7<74<73=82>93>:1=9083-94.;60<92=:3>;4?<5@<3E>4G?4I?3L@0O?0P?/P?-L?,<;&:=(?<+A;-B71A62>42;30=84B;5H94N2.Y,)l/.‡;= FE£;0¢2$Ÿ1 ¤9'¥<)ž7$ž8"¢<&¤;&ª=)±A-¶A/¹>.»<-¾:-¾</²<.¬<.©9+©9+«<+­>-­>-­<,²?-°8(¹>.ËL=ËG:¼6*º2&É9.Ð6,Ô6+Ô8,Ö:.Ø:/Ü8.ã6/è3,ð0-ô.+ô.+ð1)ç2'Ý6&Ô8"Ò7!Ý8$Ü5#Ú9'Ú>/Ó=.È6)Å9,ËA7É<5Í>8ÙEAåKIêJJéCCì?AëCCÞCAÕD?ÍB=Â=4¶:.®8*«:*¬;+¬8)ÀD8ÔNEÝIEà@@è>A÷BIÿHPôAGô@IùCOýGTþEUú@Uû?XþA_ÿDfÿCiÿCkÿFpÿIwÿK{ÿL|ÿJzÿFxÿHwÿKtúNtÿZ|ÿa€ýUvñCdûIkÿTvÜ?\ÍI`Ø{…¸||aC;|n®ŽÕ³§óÛÑûìåúòðù÷ú÷ôýôìûúëÿÿêÿÿìÿÿîÿÿóÿÿ÷ÿÿûÿÿýüÿþûÿýùÿúøÿøöÿõöýóôûðôùðóðçêåßáÓÏξ½¹­®¨¢¥ž£™£—£«žž¦—›£–/.,/.,0/-10,21-32.54/650880991;;3==5??5AA7BB8CC9HE<JF;KH9MJ9PK8OM8QL8OL;LJ>QPL^]bmlzzz’‚¡€‚¨€€¦{u—rkŠe_{YSmTLdMEZG@PB<HD?F@;?<87;63;60<8/=9.;8/:70991;;3>;2?=1@<1?;/A;-F?/H?.K?/M@/O?0O?/P>0L?/@=*?>,@=.?;/?;2>93=:5:94<94D95M51V-+j)-„28ž8C«>C¦7.¥7(¥:(ª?-¨?, 9&¡8#¤;&¥:&«<)³>,¹@/½>/Á=0Å=1Ä>2½?3¶=2²9.®8*¯9+°:,²:,³9*¶;,¹;-ÄB4ËE9È>3¾1'À2(Í9/Ö5+Ø4*Ú6-Û7-Þ7.á6,æ3,ì1*ó0,ô.+ô/)ï0(ä2&Û4$Ò6 Ð5×2Ú0Ú4$Ü<.Ö=/Ð9.Í=2ÒD:Ä5-Å60Ê;5ØD@âMIåKIÞC?Ö=8Ó@9ÎA8Ç>4¾</µ:+°8*¯9+±;-¬4&½?3ÑH@ÙHCÝB@å@DóFLýNUð?Eð?EöBMþHUþHWüBWú@XüA^ÿAcÿCfÿFmÿIrÿMyÿO|ÿL{ÿIyÿDvÿN~ÿR}þKrøMoÿVuÿUu÷MjðFcïKfÒ>VádtþŸ§ÓŽd92lJ>¥ynÐ¥œõÔËÿéãÿôòÿýÿÿüÿùóÿüïÿÿïÿÿðÿÿòÿÿôÿÿ÷ÿÿûýÿüûÿýúÿüøÿúøÿù÷ÿö÷ÿõöÿôøþó÷öëïìãäÚÕÒÉÆÁº¹´³´¬±´©°¶ª¶¾³°¸­¬´©10,10,0/+0/+10,21,43.54/77/880991;;3==3??5AA7DA8IE:LF:NH:PJ:RK9RM:SL:QK=OJDVTUfdqwx††¨¹“ÃÆŽ‹À‡ƒ¶{w©pmšid_[~UPnNJaKGXEBM?=B;7895296/85,85,671783891;;1></?<+B=*C<)G?,J?+K@,LA/M@0M?2L@4K>5L?6K>5F<3B92=82:946;47<59<5>:1H4-Y2-w78”?D¦>E§9<ª;0ª<+«@.¬A/©@-¥<)¦;'«>*§8$­:'µ<+¼=.Á<-Å;.Ê<0Ê=3Å?6¾>3º:/·7,·7,¸8+º8+º8+»7+ÇA5ÍC8Å8.Á1&Æ3)Ë7-Ï5+Û4+ß3)á4-â6,ã5,ç5+ì1*ð/*õ/,ö/*ò/)ì0'â2#Ù4!Ð5Ï4Ö1Ù/Ø2"Ø6)×9-Ô:0Ö?6ØE=ÖF>Í@7É<5Ë@9ÖKDÙNGÒE>Å;1Å=1Â<0À</º;,·9*´:+¶<-¹?0µ9-¿<2É@:ÒC?ÛCBãDHíJOöOVì?Eí>CòBLûIUÿJYýFXúCYûC]û@_ûBdÿElÿJsÿNzÿO|ÿLyþIvÿJwÿTÿT}ýJqùImÿStÿVtøNiëD^äF]êXkÿ–¢ÿµ¼óžŽHFk.)¦kcÍ–óÈÁÿãÞÿñðÿüýÿýÿü÷þþöÿÿöÿÿ÷ÿÿøÿÿúÿÿüÿÿýýÿýúÿüøÿûøÿùøÿø÷ÿöøÿõ÷ÿôøÿôøýñóóéêäÜÚÖÑÍÍÊÃÉÉ¿ÊÊÀÊÍÂÉÐȾȿ·Á¸65143.32.10+10+21,32-43.66.77/880::2<<2>>4@@6B@4JD8ME8OH8RK;TK:TM;SL<RKAQLIZW^li|~Œ¸–™Ì™žØšžÞ™˜Ú”‘ÔŒŠÉ†…¿~µxv§nk–fe‡]ZwVTiMKYDAJ><?;:8;74762555457664872<:.?<+C>*F@*G?*H@+IA,IB0IA4HB6HA9G@:K=<I;;C9:=77875384/83/917<574+C1']80~C=–GCž>?ž51§;/ª<+ª?-ª?-©>,©>*¬?+°?-«8%²9(¹:+¿9-Ã9,È:.Í:0Ï<4Ë>5Æ;4Â91Á8.Á8.Â9/Â8.Ã6,Å7-ÑC9Ð@7Ã0&Ã,#Ð7/Ö<4Ó2*à3,ä2(ç2+è3*ê3+í2+ð/*ó-*ö/*õ.)ñ0)ì1(á4$Ú5"Ñ6 Ð5Ø7#Ù3#Ö3$Õ3&Õ5)Ô8,Ô<1Ö?6ìYQáRJÓHAÌC;ÊE<ÌI?ÈE;À>1¼:*¼;(¼:*¹:)·:(¸:+¼>0¿A3ÁA6Á<3Å<6ÏA=×EEÝGHäIMëLPèBFê@CðCIùKTþNYüJZüF\üF_øA_ùBaýEiÿJpÿNwÿOzÿNxÿLvÿQ{ÿRyþOvýOtÿVyÿ]{ÿSoîD^úTlîQd÷dtÿ’žÿ‹•ôƒ‰Ç`d§MMµjgΊXÿÞÙÿïîÿúùÿüþýûÿýúÿþûÿÿûÿÿûÿÿüÿÿûýÿûûÿûøÿûøÿüùÿûúÿûúÿøúÿöøÿó÷ýñóùíïòææçÝÛßØÒÛ×ÎÝÛÏàÞÒßáÖÜãÛÏØÓÅÎÉ<94;8185052+41*41*52+63,74-85.96/;81=:1?<3A>5C?4JB7MC7PG8SJ;WK;UL=UK?SJCSJK]Wcnl‚‚‚¦‘•Åš ÚŸ¦ê¢©ñ¡¥ïž ë™›å•˜Ý”•Ö‘ʉ‰½‚ƒ±zy¡rq‘fc~XVkPN\IGRFCLCBJ??K==G;:@;9:<94?;/C=-E@,F@*FA+EB/EC4CC7BC;AC>@ACB<FD>LCANEEOCHNAIL>HI>GDCHAA=2L:.gF7ƒOAI<Ž?2”8)¥>/©>,«>*¬?+­@,¯@-°?-±<*±8'¶8)½9*Ã9,È8-Ì8.Ò91Ô;5Ï:4Í:3Ë81Ë81Ì92Í:2Ì70Ë6/Ó<5Õ>5Ò91Ì2(Î4*Ø;2Ú<3×3*ä1*é1'ì1*î2)ð1)ò/)ô-(ö,(÷-)ô/)ð1)é3(â5'Ù6%Ò7!Ï7 Ô9%Õ8%Ó6%Ñ4%Ò4(Ó7+Ò8.Ð7/ãNGèXPçZSÚQIÌG>ÄD9¿@7¹>/¹<*¹<&¹<(¹:'¸9(º;*À>0ÃA4ÉD;Æ@7É@:ÑFCÕIHÖHGØGJßIKæFHèBDíDIõLSüQZûO]ûL]ûK`öD^÷DaùFfýIlÿNuÿOxÿOxÿPw÷VxóUvôTvüYxÿ]{ÿZwûQkòI`ýWköUgêM^ö^mâKZæTaåTa×XaÁefȃ~嫧ÿÔÑÿëèÿóòÿøùÿþÿûüÿûüÿûüÿüüþüúýýùúý÷÷ü÷ôÿú÷ÿûøÿüûÿûúÿøøÿóóýîñúëîðáäéÝÝäÙÕâÙÒæßÕëçÛñíáññåìóìÛæâÎÙÕ@=6=:3:7074-52+52+52+63,74-74-96/;81=:1?<3@=4B>3JB7MC7RF8VJ:WK;XL<WK?TICSJM^Xfpmˆ‚„«‘—Ëœ¤ã£­õ§°ýª±ÿ¦¬ú¡§ó ¤îŸ£ê¡á™›Ö•–Ì’’ĉˆ´yyŸji‹`]|XUpRPhOMeNJcKG^FBS@=H?:>?:6@<1A>/C@/CB0BC3BD7?D=>D@<ED;BJ>CVCIaLRhU\o\br`dobbjd`afXWaJDlG>ƒSE•XF“J7‘@+™>+¨A.®@/®A-¯@-°A.´A/²=+°7&µ7(¼8+Â8+È8-Í6-Ñ7/Õ81Ø;4Ò72Ð72Ð72Ñ82Ô94Ô94Ó83Ó6/ÞA:Õ8/Ñ3*Ö8/Þ=5Þ=5Ú91Ü5,ç2)ë0'ï0(ñ0)ô/)÷-)÷,(÷,(÷-)ô/)î2)é4)á5'Ú7&Ô7$Ï8#Î7"Ï8%Î7$Ï6&Ð7)Ò9+Ñ7+Î4*Ë4+ãNGód\ë`YÕOFÄA7º;2µ9-¸>)¸>'¹<&¹;%º9&½9*À</Ä>2ÊD9ÊA9ÎE?ÕKHÓLIÎGDÍEEÖHGãIIæCDèEHòMSøSZùR\÷O^úOaôH^õG`øGdûIiÿNrÿQxÿRyÿTzðUuïZwù^}ý^|ùUpõMgùOiÿYnÿ[mÿctðM^÷TeôO`üUgõL_äR_À^_»vqל˜úÉÅÿåãÿíëÿôôÿÿýüÿÿûÿÿûÿÿûÿþýýýýüúþùöýøõÿøõÿùöÿúùÿúùÿööüððøéìôææëÝÝèÚÙäÙÓèÞÕðèÝùóåÿúìþþòôúöáëêÓÝÜB>5A=4@<3>:1<8/:6-84+73*62)62)73*84+;60>93A<6E>6I@7MC7RF8UI9WJ:XK;ZLA[NHTIMXR`gd|~§’Ê— ãžªö¥°ÿª³ÿ«²ÿ¬´ÿ¬²üª±ùª¯ó¨¬ì©«èŸ¡Ú™šÒÁ±tr¡he’]Z‡XR~XQzYQvVOnMH_C?M?:@?;:B?8>>4@B5BE:?D=<B>:CB>FH?LUDVnQfƒarŽisŽtvx„o€€^lŠ[c’WYžWU¦VM¦M?Ÿ@.œ9$ :$§<(¬=*®?,±@.³@-´?-¶=,¹;,º6'¾6(Ä6*Ë7-Ñ7-Ö8/Ú91Ú83×84Ø95Ù:6Ø93Ø61Ø61Ú83Ý:3æC<à=6Ú70ã@7þ[Rÿlcÿ]Tç?6å3)í2)ñ2*ô/)ô*&õ(%ø(&ø+(÷-+ó0,í2+ã1'Ú0#Ô1"Ô4$Ó:(Ì;&Ê<(Í<)Ï<*Ò:,Ò9+Ò8,Ñ7-Ú@8Ï81ÜGAôc^åXQËB<Å@;·4*·:&¶<$¹<&º<&½:(¿:+Ä<0Æ>2Ç>4ÌC;ÙPJßXRÔOJÃ?:À?:ÏHDÞHGâGEæJKïPTñRWïNVíKXñL\ùRføOf÷Ke÷JfüMlÿQsÿRvýRvôWvîXuõXuû[wÿ\xÿZsÿWnÿVkÿbuýVgÿ\mÿ[lñFXôDXÿQeîVeÆfgªieʋ網øÒÏÿëçýïîüø÷ùýüùÿÿùÿÿúÿþüþýÿþüÿûøþöôþùõÿû÷ÿùöÿöôÿööÿõõöèèæØØãÕÔÞÐÍáÖÐñçÞüôçþøèÿüéÿÿóúÿùèñðØáàC?6B>3A=4?;2=90;7.:6-95,73*73*73*84+:5/=82@;5D=5H?6LB6QE7TH8VI8WJ9YK>ZMEUJNWQ_eby{¤ŠÉ”⛦õ£®þ«´ÿ¬µÿ®¶ÿ¯·ÿ°·ÿ¯¶ü¯´ø¯²õ©ªë¢£ã˜˜ØŒŠÉ€»uq®ie c^˜`WŽ`Vˆ]TVPtMIbFCTBAIAAC<<:AB=FEACD?A?@DBEOMRWVdch†quš}¢‡}Ÿ’}œ {š¥pŠ¤`u¬Yi¶VaºQU¸HF°@4¬;)¬<&­='¨8$¨7%«8&®9(°8'²9(µ7(¸6(»3%Â4(Ê7-Ó:2Ù<3Þ=5ß<5ß<5á>9ß<7ß<7á>9åB=èC=çB<æA;å@:æB9ä@7Ü8/Õ1(Ø6+ëI>ÿ[Oñ@6î6,ê+#î)#ø-)ÿ/-þ,+ö((ú0.õ4/ï61ç6.Þ3)Ö2&Ô2%Ï6&Ë:'È;'Ê<(Í:(Ï9*Ð7)Ñ5)Ð4(Ó9/Ï5-Ô=6åPJåTQÛLHÍB?·1(¼;(»=&½<'¾;'¾9(À8(Â:,Ä:/È>4ËB8ÕOFÜWPÒRIÃD=¿C;ÌHCÛLHßJFåMLëSRíTWëPVéNVìOZ÷VføUhùSiúRküRmÿSqÿStÿRuòMmøUtÿ\zÿ_{ÿ\vÿUoûRiûReüUf÷RbÿZhÿZhóN^øScþYißS^¶`_—^W¶}Ù©¥îÈÅýáÞùééýøõúüùùÿÿøÿÿ÷ÿýúþýÿÿýÿûûÿ÷õýøôþùõþùõþöóÿ÷öÿõõöêêêÜÛäÖÓÝÐÊßÕÌïåÛüõåÿùçÿýéÿÿïúÿøèñîÛáßEA6EA5C?4A=2?;0=9.<8-;7,84+84+73*84+:5/=82?:4C<4G>5JB7ND8RF6TG6WG7YI<YJCWKKXP]b^ysuœ…ŠÂ™Ü˜¤ð «úª³þ­µþ¯·ÿ±¹ÿ³ºÿ´»ÿµ¹ÿµ¹ÿ¯²ù¬¬ô££ë™—àŽÓƒ€Çxu¼sm³k`¢i]›cZ‘]W…VRwNKhEDV@@L85<A<@KABL@BQ>BZEJpW]‚cs˜r—¥z§®«²{£¸vœÀp“ÂcƒÀTnÂG\ÐK\ÑHPÄ<<º5.¸9*µ<'°<%°;'°;)²:)´;*·<,»<-À<-Ä<.Ä6*Ë8.Ó<1Ù?5ßA8á>7à<3ß:4Ü71Ù4.Ø3-Þ93æA;ìE?éB<ä=5ã<4Û4,Ø4+Û7-Ô2'Ì, Ö6*éG:õK>ò@6ï4-ð-)ö,*ú,,ü,,ø*,ð*)ì/+è2.ã5.Ü4+Ø1(Õ1'Ñ3'Í7(Ë:)Í:(Ð:)Ò;*Ó:*Ô8+Ô8,Ñ4+Ö<4Õ:5Õ<7åONíYWÙEEÂ3/À;,¿<(À;*¿:)Á9)À8(À8*À8,Æ=3ÇA6ÏJAØUKÒRGÆG>ÀD:ÇG>ÖKDØICÝLIäSPåSTâPSâMSåNWòXdöZhý[pþZrüVnúRlûQlÿQpýGmÿPvÿZ}ÿ[{ÿVrýTkþWkÿ\mûYhøZhûamö`kí]gïfnìfmÉ\_ ]W{OF˜mfÁ˜”ݺ¶ðÔÑôàßÿõôùù÷ùÿýùÿÿ÷ÿýúþýÿÿÿÿýÿÿøùüùôüùòüùôýøôÿùöÿøöùîìïäâåÚÖÛÐÊÜÒÈîäØýöäÿûèÿýçÿÿíúýôêðìÞãßIE9HD8FB6D@4B>3@<1?;0>:/:6-95,95,95,:5/<71>93@;5E>6I@7LD7OF5RE4UE5WG8WI>XMKXNW^Zqpp–€†ºŒ–Ô•¡é©õ¨°ù©±ù­³ý°·ÿ±·ÿ²¹ÿ´¸ÿ´¸ÿ¯±ü«­ø¥§òŸžê—–⌋ׂÍ}yÅum¶pgªf`ž_ZYX„QQuGGcA>Q=5DH8BT=C`@EnCJ€OU–]d«fx¿kÉnšËo˜ÉiÈ`ƒÉWxÆIgÄ;UÆ2HÙAPàEMÑ;<Æ71Ä?0½@,±:$­6"­5$®5$³5&¶7(¼8+Ã;-È</Ó@6×@7Ú@6Ü?6Þ=5Þ93Ý6.Û4,Ó.(Ò-'Ó.(Ø3-á:4ã<4á81Ü5-Ü5-Ð,"Í)Ù7,âB6Ü?0Ð4%Ë.éF7óI<ýH?ü<7ô-*ñ#%õ')û/2ñ-.ë/.ä2.Þ3,Ú1*×0*Ö/)Ó0'Ó7*Ò9+Ö:+Ø<-Ú>/Û?0Ü@3Ü@3Ò6*æLBåJEÎ50ßGFóZ\ßIKÕA?È</Ä;+Ã:*Ã:*Â:*Â:*Á9+¾9*Â<0Â>2ÈF9ÏOBÎPDÆH<¿C7ÁC7ÎH?ÑF?ÕJEÛPKÝROÙMLÚKMÜKPëX`ó[güaqÿauúXmõOgõMgÿNkÿOuÿRyÿUwÿTqüTmý[pÿcuÿjxÿguúboõamídlãflÙhjÎghµfa^TeG<^U©ˆÍ«©åÇÅïÚÙÿóóùøöùýüøÿÿ÷ÿÿûÿÿÿþÿÿüÿÿùúþûöûûóûúõþûöÿýùÿûøþôòøíéêßÙÞÔËÝÓÉíæÖÿøåÿþèÿÿæÿÿëøúïêïèãæßNH:MG9LF8JD6HB6F@4D=3C<2?80>7/=6.=6.=60>71@93?:4C>8EA8KC8NE6QD3RE2VF6VH;ZMGVMR[Whlk‹~‚±Š“Î’Ÿãš¦î¦®÷©¯ù­°ý¯³ý°³ÿ°´þ°³ÿ¯³ý«®û¨«ø¤§ô ¢ïšœé“•âŠŒÙ†…уÉ{u»mk¬dež_a’Y[„RQsNHbWFY_CQmBLEM˜MT¬U]¼[bÊZhÙRpâRußTuÙPlÒJbÍBWÇ8JÅ.?Ô8EãCKæGKØ>>Í>6ÌF:ÃH6¶?+·>-¸=-º<-½>/Ã?0ÊB4ÐD7ÕE:ÙE9ÚB7Û>5Ù;2Ù6-Ù5,Ú3+×3*Ô1*×4-Ú7.Ý90ß80Þ7/Ý6.Ü5,Ö/&Ù5+×7+Ï2#Í1"Ò9)Õ>-Ô;)Ø<-æD7øJAýD?ù64õ*-ö*-÷/2÷67í55â30Ú1,×0*×/,Ù0-Ù0+ã81ä91â:1â;2à<0ß=0Ü?0Ú>1Ñ7+ïWLøaZÓ;6Ñ;:æPQÜFHæPQÏ<4Ê:/Æ8,Å9,Ä:-Ä<.Ã;-À;,¾:-¾<.ÃA3ÇH9ÇI;ÂD6¾@2¼>0ÉF<ÊE<ÎIBÕPI×RMÕNKÓKK×LOéZ`ð^hüfrÿhxü]qòPeóMeýNkÿVzÿTxÿRrøTmö]qûhxûjw÷erüetó_mì`kêkrßruÃjfªd\žla}fVXH9kXJ”|r½ œÞÂÁîÖÖþîïûõõûûûûÿÿùÿÿýþÿÿþÿÿûÿÿúýÿþùûþõûüöÿþùÿÿúÿþúÿûõÿ÷òñèáäÜÑáÙÌðé×ÿúäÿÿæÿþåÿÿê÷ùëíðçèéáQK=PJ<OI;MG9KE9IC7G@6G@6B;3A:2@91?80?82?82A:4@;5B?8EB9KE9MF6PE3RE2UF3UH7YLCUKLZScii…|«‰“È“žÞš¤ë¦¬ø©¬û¬­ý­°ÿ®±ÿ®±þ­°ý­°ý©¬ù§ª÷¤¨ò¢¦ðŸ£íšžè•™ã’”Þ’’Ú‰ŠÍ|€Àsx²ou©mpigŽj_}y_x‚WjŽP_£O\»S\ÍT]ÖPWÛHRå@Qè?RäCRÜDPÖCKÏ@DÊ9<É46äJLçIJáAAÕ74Î95ÎA8ÈD8¾>1ÃE6ÃE6ÅF7ÉE8ÎF8ÑG:×G<ÚG=Ö>3Õ;1Ö8/Õ4,Ö3*Ø4+Û4,Ú6-Û81Ý<4à=4ß<3Ý90Ü5-Ü5,Û7-Ò.$Ý;0Ú=.Í1"Æ-Î7&Ò=)Í:&Ì9'Ô8)â:/ó=9ÿ@@ÿ<>þ37ó,/ê,.á+*Ø*)Ô+(×/,Þ44ä88é99ï75ð74î73è71ã7-Ü6*×5(Ñ5&Í5(çPEÿmcÛHAÈ42×CCÓ>BêVVÙA<Ò>4Ë8.Æ6+Æ:-Æ</Ã>/Á=.»9+»<-¾?0ÀA2¿A2½@.¼=.»<-ÃC6ÄD9ÈH?ÐPGÓRLÐOIÒNLÕONé^cîagûitÿnzÿduõVjõQiÿUoÿWvÿVtúXpñ^pônyöw€íksÞXañ`mñ`mìboïs}숊Ì|ªth™yjskXON:_VGƒqg¯–’ÜÀ¿ïÕØüéëþôõýûüýþÿúþÿþýÿÿýÿÿûÿÿùþÿÿûùÿõúýöÿÿúÿÿúÿÿøÿý÷ÿþöùðçíåÚéáÔôïÜÿûåÿþåÿÿãÿÿèùúêòôçîðåSM=RL<QK=OI;MG9KE7JD8IC7E>4D=3B;3A:2@93A:4A96@;7A@;CC;IE9MG7OG2RF0UF1UH5WK?RHFXR^jg‚}§‰“Ä’žÚ˜¢ç¤§ö¦§ú«©ü«¬þ¬­ÿ­®þ¬®û¬®û¨¬ö¦ªô¤¨ñ£§ð¡¨î §í¤è›¢æ™žâ’šÛ‹“҆ʃ„ˆ·ƒ¨ˆyšmˆšcz©Xi»Q_ÏMYàIRèAIê=Aé=;ã>8ÝC9ÖH:ÎI8ÅF3ÂC0Å@1äTIàG?Ú;7Ø64Ø88Ø:;Ñ98È74À:/¾<.¿;.À:.Â8+Ã7*Æ4'Æ2&Î4*Ð3*Ñ3(Ô3)Ö3*Ù5,Ý6.Ü8/Þ=3Û=2Ü;1Û8/Û7-Ú6,Ø4*×3)Õ3&Ó3%Ð4%Ï6&Ò=)Ñ>*Ê9$À2È:&Ê4%Õ1'ç51ú<<ÿ=@ÿ7=÷37ê-1á-.Ù--×/.Ü43ã9:é;=ð9=ö26ø03ô01í1/ä1*Þ2(Õ1%Ï3$É1$Ñ=1új_äTLÈ95Ð@?Ë:=äRSäJHÜC=Ñ:3É6.Æ8.Å;0Â<0¿=/º;*¼?-½@.¼?-º;*º;(½;+¾<,¼>0¼>2ÀD8ÈLBÌPHÊNFÌLIÐNLèaeìaføhrÿo{ÿhx÷Zk÷UjþZrÿYsû]tîaræjtë}€ñ‡‰èwyÚ_dñgtþm|óeuëlwö‘•ì¢ŸÄ”Š¢|hjUHQ<WUFth\¤ŒˆÛ¿¾òÕÙùãæÿóöÿúüþþÿüýÿþûÿÿüÿÿúÿÿøýÿÿûùÿõ÷ýóýÿ÷ÿÿøÿýöÿý÷ÿÿöÿùïõïáòìÜúõáÿýçÿýäÿþâÿÿçýþìùúì÷÷ëVO?TN>SK>PJ<OG:LF8LD7JD8H@5F@4E<3B;1B92A:2C:3A<6C@9DD:JF:MG7OG2QF0TH2UH5UI=QGEWQ]jh€~‚¨Œ”Å“Ø™¢çŸ ò£ ÷¦£ú§§ý¨ªÿ©«þ©¬ý§­û¥«õ£ªò£§î¢§ë¤©í¦©î¥¨í£§î˜ è”¡å”Ÿß”Ÿ×•›Íš•¾ Œ¯ªƒ ¥e´]pÂQcÐIWÜBNå>Fë<Aì<<ê?8ãA4ÜE4ÔI4ÊI3ÂF.¿B,Â?-âSEÞD<Ý97æ>>êDFå@DÙ8=Î65ÍB;ÈD8ÉC8ÇA5Æ>2Ã9,Â6)Â2'Æ2(Ë3(Î4*Ó5,Ø5.Ù4.Û4.Û4,äB7Ý=1Ù7,Ú6,ß9-ß9-Û5)Õ1%Ø8(Í2 Ê1!Ï9(Î8'Ç4"Ê7%ÔC0È7&Î8*×6,Þ5.æ3/î53ö:9û?>ÿLKúHFòBBì>=ê<=ç7:å26æ,1ô+1ø)/ô,.ï/.è1+à4*Ù5)Ó7(Æ0!À.ôdYë]SÏ@:ÔDCË;;ßMMêRQàHEÓ;6É6/Æ8.Æ9/Ã;-¾:+¾<,Á@-ÀA.»<)·8%¸9&½<)¾?.µ7)³7+¸>1ÁG:ÅK@ÅIAÈIBËJEåa_æ^`ñdjþnwþkuó]iðXeø]mú^sõbtèdoãlrì~ù‹ö†…éqsøryÿy†õaqàXföˆ‘ÿ´´Ð®¢ ›‡]jPDR9QT?jbU›ˆÚÀ¿òØÙöàãÿô÷ÿúýÿþÿýüÿþüÿÿýÿÿûÿþùýûÿúôÿòòþòùÿôüÿöûýòÿýôÿÿôÿÿóûõç÷ñáþùåÿýçþüãþýáÿÿêÿÿñýýóüüòXO@WP@WN?UN>TK<RK;RI:PH;MC7KC6KA5H@3H>2G?2H>2F@4GC:GE9JG8NI6RJ5UJ4UJ4VK9XNDULMZTbkhƒ{~§‰Ã‘™×˜Ÿç£¤ö¥¢ù¢¢ü¡¢ü ¤ÿ¢¨ÿ£«ÿ¤­ü¡ªõ¡©ñ¡¨ì¥¨íª©ï­©ó±©ö¬©ø ©ø—§ò’¡â–ŸÖ¦£Î¶ž¾¹…œ¸gz¿L]ÑERß>Mç;Gç<Dæ=Bà@@à@@â>?ß<=ÝEBÉ:4ÊD9ÊF:º1)ÛJEèJIéCEë>Bè;?æ<?á=>Ú<=Ô<;ÏB;È?7ÊD;ÑMAÍK>¿=0¸6)½9,¿7+Ã6,È5-Ë2*Ñ/*Ô/+Û2/Þ5.çA5ß9+Ù1$Ý3&å9+ç;-ß8&Õ2Ï2Ì4Ê5!Ç4"Ç4"Ê4%Í5'Ï5)Ê0&Ï2)Ñ5)Ò6*Ò4(Õ3&×3'Ü4)à2)æ3.ë52ë33é/2ç-2è-4í.5ö-3ö+/ï+,ì/-ê5.ã9,Ù7(Ð4%Ã-Ä3"çXHéYNË;3ßNIÅ41ÚHHáOPÜJJÔC@Ì;6È80Æ8,Ç9+È<+Å<*Â;(¾9&¼;(»<)º=)º=+·<,´8,µ;0¹=1»?3»?3¾@4À@5ÄA7ïjaõpiêc_ômjûqqìadôgmÿpyÿlzûhxðdoébiëdjîlnîqoîqoûy{ÿ}…ùZlücwßbpû¬¯¶ªš}‘u]rQJY:LR8snZ¥•ˆË·°íÕÓÿîðÿö÷ÿ÷ûýøüüüþþÿÿþÿÿÿþÿûÿþðÿôåþéæûêïÿîøÿöüÿôþÿóÿþñÿýñÿûîÿúêÿùæÿùãÿùáÿùáüúåÿÿõÿÿûÿÿûYPAXO@XO@VM>UL=TK<SJ;RI:NE6MD5LC4KB3JA2JA2JA2IA4GC8HD9LF8OH6RJ5SK4VK7TK:XNEULMYUckhƒ{}¦†ŒÀ•Ó–šáŸžìŸñžžôžŸù¢ýŸ¦ÿ ªÿ¡¬û ¬ô «íŸ§è¢¥è¥¤ê©£í« î¤Ÿï §÷š¦ðœ¡á£œÐ±˜À¿ªÂq„ÄTbÑCOâ<Fì8Aï7?ê:=å<?Ü@AÛACà<CÚ9?ÚADË;;ÌB?Ê@=Á31åOPæCFè?Dê;Bç8?â8;Û89Õ:8Ï;7ÔE?Æ=5Å<4ÌG>ÌLAÁC5¸:,·9+¹7*¿7+Æ6-Ë4-Ñ2.Ø3/á53ä84ä>2á;-Þ6)ß5&á5'á5'Ú5"Ó4Ñ9$Ë9"Ç9%Ç:&É<+Ë<,Ì8,Î4*Õ3.Ö5-Ó7+Ï7)É6&Ç4"Ë4!Ï4"Ø2$Þ2&ã0+æ.,æ,-æ,/æ-2è.3ì+.í,-ì0.è2.à4*Û5'Õ8'Ò9'Õ?.»*ÖD5Ð>1ÙF>ëVPÚB?ØBAçUVâRRÜKHÔC>Í=5É9.È9+Ç8(È;*Ä;(¿:'½<)½>+º?-¹@/¶>.²:,´;0·=0¸>1º?0½?1ÁB3ÅC5ëi\òmdçb[ðkfõolèbañklütxÿq~ÿo|öirí]fêY`ñbf÷qpþzxûvwÿx~ùRdþ[pä]nö¦©©¦“jŒkZtON_;SZ;us\©ÖĸöáÜÿõñÿúúÿúûÿûüüüüúþýûÿþúþÿõÿúíÿóáÿéáýæéÿëóÿñøÿòýÿòÿÿñÿýïÿýíÿúéÿöåûóàúòÝüôßü÷äýúóüüúÿÿý\PB[OA[OAYM?XL>WK=VJ<VJ<SG9RF8QE7OC5OC5OC5OC5MC7JC9JF;MG9PI7SK6VK5VK7TK:WMCVMNZWbkiy{¡…‰¹‹‘Ë‘–Ö˜˜Þ™™ã˜™éšî› ô£÷Ÿ§ø ©ô ªï¨èœ¤ãœ¢àžŸàžá™ã›™â–›ßššÚ¤•Ð±ŒÀ¿‚¬Çr“ÉYqÇBS×ALß>Dã=?å==å<?ã=?á>Aá>Cà<C×8=Õ?AÏA@ÊC?Ã<8Ä96éWWàBCä>Bè;?ã9<Ü68Ö66Ñ96Ì;6ÕHAÄ;1¾5+ÅA5ÍK>ÆH:»=/·8)º6)¿7)Ç7,Ï6.×50Þ71æ95é=9×3*×5*Ú6*Ü6*Ý5*Ý7)Ú:*×>,Å4!¿4¹4!¹6"¼8)½8)½3(À-%ã@;å>8Þ=3Õ<.Ì9)È7$È7"Ì7#Ò7%Õ3$×/&Ù.'Û.*Ü.-Û//Ü./Û,)ß0+à5-Ü5,Õ3&Ð4%Ð9&Ñ>*ÔA/Â1 çSEÒ;0ÚA;ÞC?èJIðTUíUTçSQãOMÝJCÖC;Ï<2Ê8+Å6&Ä7&À7%¼7&¹:'¹<*·>-µ=,²=,°:,±;/´<.µ=/·=.¹?0¾C4ÃE7Ü\Qêg]äaYðlgöpmça`ìfgójqàR^ï^kõhqòemñ`gôeiùqqþxwútuÿnuóJ]øRhä[mñœ¡£œŠa€`UoHOd=W`Aww]­¥’áÑÂÿîæÿøñÿüøÿþúþÿúûÿüûÿýûÿýùÿûóÿöèÿîÜþãÚøÞáùáèûåïüèöýëýþìýúéÿúêÿ÷æúñàôèØòçÕöëÙøñáþúñýüøÿþû\PB\PB[OAZN@YM?YM?XL>XL>UI;TH:SG9RF8RF8RF8RF8PF:LE;KG<OI;RK9TL7WL6WL8WK;VLBUMK\V`jh~yy›‚…²ŠÂ”Γ•Ò•”Ö••Û–˜ã˜›è˜žìš¢í›£ëœ¥è˜¢ß–ŸÚ•›Õ”˜Õ“—Ö’“Ö‘Ò…„½‘ƒ¶¥}±·s¢ÈfÒVzÕGaÔ<KÞAJàBCÞCAàB?áAAä?Cç>Eç=Fã?FÖ:>Ñ?@ÑEDÆA<º61Å>:êZYÝABã@Cæ=@ã:=Û89Ó97Ð<8ÎA8ÏE;Â:.»2(À</ÇE7ÄE6½>/¸9(½8)Â9)Ë8.Ò:/Ù80à91è;7ë>8Ø1+Ù2*Ü3,Ý5,à5-ß7.Û9.Ö=/É7(Æ:)Á<+¾<,¿;.Á;0Å<6Î95ëC@í@<ä@7Ù=1Ï9*Ç9%È:&É;%Ï<(Ð7'Ï1%Ñ1%Ô1(Ö3,Ô1,Ñ/*Ó2*Ó5,Ó7+Ð7)Í5'Ê7%Ì;(Ì>*Ì;(Ï<,ô^PàF<Ò3/Ò.,æ@@ûWXÿusÿroÿjgö^YçPGÕA7Ç5(½. Ä8'À8(»8&¸;)·<,µ=-²=,°<-¯;.­<.°</°<-±;-¶>.¼B3ÀF7ËMAß`Wâa[ôpløtræ`aä]aæ]dÖHTçYeógrôgoöelükpþsvþvvûpsûenñDXôKbåXkë’– •ƒ_zYQlCSh?\gEy|_°ª”çÜÊÿõèÿùðÿûñþþôýÿ÷ûÿúùÿúöÿøòüóêûëÚøÞÎóÒÊëÌÏìÎ×îÒàðÖéóÛò÷áöõáûöãüõãõìÛíáÑéÝÍíáÑñèÙüõíü÷ñþùó\PB\PB[OA[OAZN@YM?YM?YM?WK=VJ<UI;UI;TH:UI;UI;SI=OG<OI=QI<SL:UM8XM7YL9XL<UKAUKI\U]hexut“|~¥…‡·ŒÂŽÃȒϔԒ•Ü“—à”˜ß•šÞ•Ü’›ÖŽ”ΉDž‹Å‡Ã}ƒÁ~¸}tŸŽp”¨gÁ\„ÖNvâAcè:Uê9KæAGàECÜGAÛGCßEEæAGî<Jí=JæBI×>@Ð@?ÐIE¿>8³2,ÈC<àUPÜDCáACã?@á>?Ú?=Ô@<ÑD;ÏF<Ç=2À8*½5)½9*¿=-¿=-½;+½<)Â:*Ç;*Ï;/Õ;/Û8/à8/ç83é:5æ95ä52ä20æ21ç32æ40Ý2+Ô0'Ë1'Ë7-È:0Ä7.Á4-Ã40Ì:;Ý?@ë8;í76ä71Ø5,Ì4&Æ5"Ä7#Å:%Ë=)Ë8&Ì4&Î5'Ô8,Ô:0Ó9/Ð8-Ð>1Ê;-Å8'Ä7%Æ9'Ç<)Ç<)Ç:(Í>-Í:*Ø>2áC:Ô/-ä::à24ß56×53Ö;6ÞC>åKCêQIêSHèTHäUGË?0Ä?.¾<,¸=-·>-´?.°?/®>0¬<.¬<.¬<.¬=,­<,±=.·A3ºD6ÆLAÞbXâc]ðnlôrrå`cå`eç`g÷kvûoz÷kví`hð_fýlqÿx{ÿy|úmsø^jóAWôC]èUh懣“ƒg]YtI^uIhwPˆf³²–èâÌÿúéÿýíÿþïýÿòûÿôøÿôôÿñíûêäòáØî×Åèǻ伺޺¿Þ¼ÇàÀÍâÃØæÌãëÓìîØôñÞ÷òßóêÙìàÒèÚÍêÜÏïáÖòèßñèáòéâ[OA[OA[OAZN@ZN@YM?YM?YM?XL>XL>WK=VJ<VJ<WK=WK=XL>QI>QI>SK>UL;XM9XM7YL9XM;WK?ULGYSWe^nnjƒut–~}¥„…±†‰´‡‰¹Š‹Á‹ÈŽÏŽŽÔÕӔӋʃˆÀ|¸u|²ov­io«ljœ€lˆ“cy®YvËPoãBdð7Vö4L÷8Hï@EåFBÝJCÛJEáGGèCJò=Nð>LäCI×CCÌA>ÎIDº;4°4,ÉI@ÕLFØBAÚ?=Û;;Ú<;Ø@=ÔE?ÍG<ËG:À8*Á8(À8*¾9(¼9'»8&½:(À;(Ä;)Ê=,Ò<.×;.Ü8.á6.ä6/è50é32è./é,0î02õ47õ77î45æ21Ú.*×4/Õ62Ñ32Ï/1Ò/4Û6=ê:Dí06î02æ3/Ü3,Ñ5)Ê7'È9(É<(Æ8$É6$Î6(Ó:,Ú>2ÝA5ÝA5ØA6ÓG8ÉA1Â;(À9&Ã<)Æ=*Å<*Å8&Ì:+Í7)Í0'æC<Û2/ï?Aã/2Ú*,Õ1/Ò5.Õ81Ö90Ò8.Ì5*Æ2&À1#ÎE5ÆA2¼=.µ:*±9)¯9+«:,ª:,«;/«=0¬>/¬<.«<+­<,²>/µA2ÉSGàg^àc_êjiînoæchðjqõoxúq{ýt~ömuîbködnÿrzÿx~ÿquúipøWfùAYô@[êQfá~ƒ¬—†ykmˆ]o‰ZyŠ`—r¶·˜ßÞÂùôÞüúåÿÿïûÿïõÿïïÿëçúäÜïÙÐãÍÅÞÁ°Ö­¨Ó¦ªÐ§°Ó«¶Ô®¼Ö±ÇÚºÒßÁàæÌèêÔòíÚòéØîâÔìÛÑêÙÏìÛÓéÚÓæÙÑåØÐ[N>[N>[N>[N>ZM=ZM=ZM=ZM=YL<YL<XK;XK;XK;YL<YL<YM?SI?TJ>UL=XL<YN:ZM:ZM:YN<YM?ULEXOR_Wbd_sjfsoyy|~¤~€©‚²ƒ„¼††Æˆ‡Ë‰ˆÌ‰ˆÊˆˆÈƒƒ¿|}µvw­pq§kl¤fg l`Ž‚`q•V^³N^ÒJ^ì@X÷6Kþ3Fþ9Có?BéD@áHBÞICâFIéBJò=Nï>NÝAEÔFDÈA=ÉHB´:/±7,ÎOFÉB<Î=8Ð64Ï10Ð51Ó>8ÏE;ÈF9ÃD5¾9(Ã:(Â:*¿:'½8%¾9&¿:'Á:&Ä9&Ë:)Ó:,Ù9+Ý7+á5+ä3+ê3-ë*+ñ*-ø-3ü/4ÿ17ÿ37ÿ38ý58ù8;õ8<ò9>ò9Aô9D÷7Fû6Hþ5Eô+5ô-2í12ã4/Ù6-Ð8*Î;+Î=,Ë5&Ñ8*Ù;/ß=2â>4ä=4å>5ßA6ÙJ<ÏG7ÉA1Ä<,Â9)Â9'Æ8*È9)É2'Ó9/á@8ëD>Þ0/à..ë46è66Ø3-Õ7.×90×:1Õ;1Ò;0Í:0É;/ÖL?ÌF:¿@1´9*°6)¬6(«7*©8*¬;-­=/®>0­=/«<+«<+­<.±=0ÀKAÚdZÞc^èkiðosêinõrzüvîfp÷oyùryöjsþlvÿwÿv}ùhoùcn÷RbþB[÷<YêKaÝt{µš‰žz}˜k{—f‚•h‘u¬²ŽËÌ­ààÄéìÑîöÞåóÙÙíÑÏæÉÅÞÀ¼Õ·´Ë®ªÈ¤šÁ”–™Ó¡È™§Ë¬Ë¡µÎ§ÁÒ°ÎÙ»ÙÝÄåãÎìåÕïáÖëÚÒçÒÍãÐÊàÏÈÚÌÃÕǾ[N>ZM=ZM=ZM=ZM=ZM=YL<YL<ZM=YL<YL<XK;XK;YL<ZM=ZL?VJ>VJ>XL>YN<ZM<ZM:ZM:ZM<[OAWMDWML\RZ^Xfb]qjfspwv–xxœ|{§~µ„¿…‚ň‚ȉ„Ç‚}¿y·zu­xq§vo¥tk¢pg za‹„QZ™HE³EHÓHOîBNø:Fþ6Aþ9@õ==îA=æD?ãEBäCHèAKî=Më?MØ?BÑGDÅA<ÃG?²9.³:/ÑUKÃ>5É83Ç/,Å*&È/*Í:3ÌC9ÃC6¼>/À;*Ä;)Ã<)Á:'Â;(Ã<)Â;'Ã8%Ä5$Ê7%Ô8)Ù7*Ý5*á3*å3)ê2*õ33ÿ58ÿ8<ÿ4:ÿ-2ÿ(-ÿ(-þ+1ü-3ö)0ò&1÷)6ÿ,?ÿ*Aü 9ó/ö"0ó(.í,1æ0/Ú1,Ô3+Ñ5)Ð6*Ô6+Ý90æ=6ë>7ë:4è71è50â92ßH=×K<ÓE7Ë=/Ä6(Â3%È6)Ï8-Î4*Ô6-æC<ß82à21Ò ì89å63Õ1(Ò4)Ò4)Ï5)Î6+Ê6*È5+Å7+ãYNØRFÊH;¾@2·;/µ;.µ<1µ<1¯9-±;/±=0±=.¯;,­9*­9,®:-±<2ÐYQÜb]ìppôvyîmrõq|ör}ÿzƒÿ‰ÿy€ôhq÷epÿq|ÿuÿktø^jöOaÿA^÷8WéG^Ûntº‹™©„‚žn~šg—hœq¡©‚´º–ÈÍ­ÕܽÌÙ»ÁÔ´²Ì©§ÂŸž¼˜š¶–²Œ±†‰³†µ~¹„•À‹œÂŸÄ‘¨Å™²È¡¾ÎªÉÒµÚÙÄæßÍêÞÒéÖÏáÌÉÛÆÃÔÁ»Î½µÈ·°ZM=ZM=ZM=ZM=ZM=ZM=ZM=ZM=XK;XK;XK;YL<YL<ZM=ZM=ZM=ZL?ZL?ZM=[N=]M=^O<\O<\O>YM=WMCWLHXNOZPX]Ub`Yia\rjfokŽsp›vq§{u³ƒ~ÁŠƒÉŠƒÇˆÀŠ~¼ˆy²ƒr¨†r§t«‡l£†\„HL¤B9¶A:ÍC@Þ@?è:;ô<>ÿDE÷><ó=<ì>=ê@AëBIêCMëANãALÐ>>Å@9¾?6·>3°</²<0ÀD8ÒMDÇ61Ô;6Í2.Ì3.ÖC;Ç?3µ6'»>,º7%Á:'Ã<)Â;(À9%Â9&Å:'Ç:(Ë:'Ð9(Ö6(Ø2$Ú."à/%ì7.õ=5õ82÷40÷0-ø**û&(û%'û%'û%'û&*÷!)ø".ÿ'7ÿ(>ÿ!;ÿ6ý1ÿ'8ï#,æ#+ã+-Ý--Ô+(Ò-)Ü41â62è64î66ò65ò12ï./î,,å/,Ü92Ñ:1Ò91ìSK»"Ä+#ßF>È.&Í.(Þ<7èE@â:7Ø/*Ú.*â51å<7ß>4Õ<.Ï5)Ë3&Ì5*Í;.Ë;0Å8.ìbXàZOÈC:¹6,º:/¸8-±3'´6*°0%°2&®2&¯4%°6'²:*´<.³=1°:0ºC;Ö\Wìppñsvöx|ûyƒõq|ÿ|„ýw€út}üs{ÿr~ÿr}ÿmxÿgsü`nôI\ÿ>\ÿ>[äAVÔek´•€’¡zƒm}™f~”c‡—j”Ÿwž¦ ¨ƒœ¨„’£Š£|€Ÿvzšqyšo|r vƒ¤u‚­wƒ³y‹¸‘¼„“¾†—¾‡œ¾Œ¢½§¼“¯½š¾Â§Ï̹ßÓÇãÒÊÜÇÄÔ¿¼Ìº¶Á²«¹ª¥ZM=ZM=ZM=ZM=ZM=ZM=ZM=ZM=XK;XK;XK;YL<YL<ZM=ZM=ZM=ZL?ZM=\L=]M=]N;^O<\O<\O>]P@[OC[NFYNJZPQ\SX_U^_Wfd\tibƒng‘qjxp¬€y¼‡€ÄŠÄ€Á~ºt«Œn¢—q¤¡u¨šjž™W{=Aª5+±5+Â<3Ó@8Ý>8è?:óA=õ=;õ;<ô;@ñ>Bî@IèAIâ@KÚAFÇ<9½=4¶<1±;/«:,®:+½A5ÐJAÚG@ÜA=Ô63Ð51Õ@9ÍC8»9+²5#½8'Â;(Ä=*Ä=*Ä;(Æ;(Ç:(Ê9(Ï9(Ï6&Ô2%Ú2%ã5*ê8.ï80ð91ç1&ç/%ê.%ï,&ö+'û+)þ,+ÿ-.ü*-ú%+ú$.ÿ'7ÿ$;ÿ7ÿ3ü0õ0ö.9õ3<å*1Û(,Ü.0Þ02Û+.ñ:>ô7=÷4:ö26ö/4ø03ù25ô87Û2-Ú;5×82äE?äE?Î/+Ñ2.Á"Ô51á?:èE@à=8Ø3-Ù2,Ý60Ý:1Ô:.Ï9*É5'Ç5(È9+Ê<0Ê<2Æ9/ícYáXNÉ@8º4+Â91Ã:0¿6,Â9/¿5+¾4*½4*»5)¸6)µ5(´6(°6)´;0»B9ÓYTèljïqtöx|þ|„øv€þ|„üyùv~þuÿsÿp}ÿkwüdqý_nöI]ÿ>\ÿ>\éCYÓeh®Žw‰˜oz•bu’\xŽ]cŠ•k˜p‹•p…”mp‡]l‰]h‰\g^k_q•ey›izŸk¬t„±vŠ·|»}¼“¼‚–½†›»‰›µ†¡³‹­¶—¾½¨ÏÆ·ØÇ¿ÖÁ¼Ï¼¸Æ·´º¬©²¤£\L<\L<\L<\L<\L<\L<\L<\L<ZJ:ZJ:ZJ:[K;[K;\L<\L<\L<\L=\L=]K=]M=]N;^O<^O<\O<_RA]QA\PD[NFZOK[PN]QS]RZ_SgcXvh]…kb‘sk¤vµ†}¾‰}½—…Á™€·›v©žpž®u¢ºv¥µi˜±Rt¸<D¾5-º4+À<0ËC7ÓE9ÛC8ä?9ñ=<÷:>ù:Aö=Eï@GæAHÙ@EÏ@BÀ;6¸90±9+­9*©8(­9*»?3ÏF<ÙD>×96Ù74Ú;7ÜC=ÝOEÎH<µ3#¾9(Á:'Ä;)Æ=+É=,È<+É:)Ì9)Ï7)Ï2#Ó/#ß4*î=3ô?6ñ91é4+à4&ß5&â2%å/$ë,$î+%ñ+(ò+(ó+-ð(+ò&/ø(6þ%:ý7ü3ø3ô%7ò0;ó5Aò8Cð;Dð<Eé5>ä,6ð2<ó/;ö.9ö-7õ.3õ.1ó/1í42Ü0,â=9Ú64ß;9ÿmjåCAÑ/-Î/,Ù:7ß@<àA;Û<6Õ7.Ö5-Ö5+Ò6*È6'Ã6%Â6'Ä8)Å;.Æ<1Æ<1Å;1ë`YáTMÉ<3¿0(Ë;3Ñ>6Î;3Ò=6Ø=8×<7Ô=6Ï<2É;1Ã9.¼6*¶6)¹;/¼@6ÏTMãgeíorøz~ÿˆû|ƒû|ƒûyûx€ÿwÿsÿn}ÿgvû`pü[mõG^ÿ<Zÿ>\ìFZÎ`až~ev…Zi„Qh…OmƒRt…X{ˆ]}ˆ^x„\q‚X`zM_Pa…UeYn•`uœg} j~£mƒ¬r„²tˆ¶x‹¹y‹¹y¹z‘º~”º“±•¬€›©†©­’ºµ¢Ç¹®Ë¸²È¶´¸¬¬ª¡¢ —š[K;[K;[K;[K;[K;[K;[K;[K;ZJ:ZJ:ZJ:[K;[K;\L<\L<\L<]K=]K=]L<^M=^M;^O<^O<^O<^Q@^Q@]OB[OC\NE[NF\OI]OO^P_bTmdY{i^‰pgœ|t­…{·ˆ{³™…º¥…´¯€ª¸z¡ÆxŸÑuœÌcŒÈMlÜFRßA@ÕA=ÏE;ÌH;ÍG;ÓE9ÞA:î@Aõ<Aú=Dø?GðAHâAFÒ@AÆ?<¿?6¶<1¯9+«:*ª9)®8*¼>0ÎD:Õ<7Õ31à;9åA?áD?èSLßUJ¿:+Á9)¾7$À7%Ä;)É=,Ê=,Ë9*Î8)Í4&Ò2&Ù2)å9/ñ>7õ>6ð5.ä/&à6)Þ6)à4*ã1'ç.)ê-)ì*(ì**ê),è',ë'1ò)9ö&<÷!;û=û%Aû6Hä(6ç.<ÿP\ÿ`lÿP\ò<Ió9Gè)8í*8ñ-9ô0:ñ27ê01á+*×(%Ø0-Ú72Ô2/åC@ÿspõVSÝ>;åGDÛ=:Ú<9Õ:5Ò80Ñ7-Ð6*Í4&Æ3#¾5#¹6$»8&¿;,À</¿9-À:/Å<2åXQÜMGÊ70Ç0)×<7ÞA:Ú;5ß<5ç>9é=9æ?9á@8Ù?5Ð<2È:.Á9-»9,»=1ËNHàc_ìnoú|ÿ„ˆý~…øy€øy€üyÿx‚ÿt‚ÿn}ýetù^n÷VhóE\ý8Vÿ<ZîH\ÇYZŠlRcrG\tB\yCdzIl}PtVvƒXrXoWm‡ZlŽ\o•buh{¤l¨o„ªq…«p…­q…±tˆ´u‰·v‰·v‰·v‹¸w¹z‘´|«{’¤|›¤…­«–¾²¤È·¯Ç¸µ´«®¡ž¥—’™[K;[K;[K;[K;[K;[K;[K;[K;ZJ:ZJ:ZJ:[K;[K;\L<\L<\L<]L<^K<^K<^M=^M;_N<^O<^O<^O<^N>^N>\O?^NA]OB^PE^OJbNYbQdcTqdZ}le‘xr¢w¨ƒv¤”}§¬†«Â‰©Î‚žÚw”ál‰ÛXwÚD_óBTúDPïJPáIHÐE>ËE<ÐF<ÙD>èBBð@Cõ@GõBHíDGßCDÏA=Â?7¿@7µ=/®:+«:*ª9)®8*»;.Ì?6áFAâ=;îBBëAAÞ;6ãJBæXLÕK>È@2À8(¼3#Á8(È<-É:*Ë7)Ð8+Î0%×3)à8/é;4í:5í60ë0+å,'ã0,ã1-ç10ì31ó25ö37÷48÷6;ì-5ê,6í.=ñ0Có-Fö)Gý+Nÿ3Rô9Lå3?ð@Mÿ_lÿlzÿWfõCSõ>Pî3Dí3Aí3>é6<ã99Û83Î4*Ç/$Ë2*Ç.(Ð72òYTö\ZòXVÛA?âHFÜB@Ô<7Î70Í6-Ï8-Ï9+Ê7'Â5#¹8#³9$µ:(¸=-¹;,¶6)¼7.Æ=5ÛNGÙEAÎ50Ð1-á>9ç@:ã81ç51ë20î21ë52ç83á:2Ø:/Ð9.È:.¾6*º8+ÈIBÜ_Yënlû}€ÿ…‰ýƒõv}öw~üyÿx‚ÿsƒÿk}ýdvù^pôSeôF]ý8Vþ=ZïL]ÀTRz_BWh<Yq?[vCfyKn~QtVx…Zyˆ_wŒay•exšhz m|§qªr„«r…«p†©o‡­rˆ°t‰³tˆµt‡µt…·r‰¸t‹¸w¶{Ž¬xŽ£x™¤‚­­•À¹§ÎÀµÒÄÁ¼¹À¨ª¶œœ¨ZJ:ZJ:ZJ:ZJ:ZJ:ZJ:ZJ:ZJ:ZJ:ZJ:ZJ:[K;[K;\L<\L<]L<^K<^K<^K<_L=^M;_N<^O<^O<]N;]N;^O<_O?_O?`P@aQAbPFbNPcN]_Pe`Usga…to—{t}q—v–®ƒŸÌ‹¡Û‚–ær…ëduéPdé;Rù3Lÿ<QûERéDKÕ?@Î@>ÑC?ÖEBãEFèBDîAEíCFçDEÚEAËB:¿?4»?3±;-©8(¨9(ª9)°8*¼:-Ê;3èIEé??ë=>å78Ú2/ÞA:îZPôh[ÚPCÉA3¾5%Â6'Ç9+È9+Ë7+Ò8,Ñ0&Ú6-æ;4é;4ê40è/,ê-+ë--ó49õ3;ø3=ü3=ÿ1>þ0=ý1=ù1>õ0Aò1Bô4Kõ5Nõ0Nö-Oÿ1Xÿ>_æ3HùO\ÿanÿ_nÿWfûP`ôDXé8JóAQê:GÝ2:Ò/2Ê2-Â8-½;+¼:*Ä:/À2(ÙJBúkcÝLGáPKÏ;9Ï;9àLJÔ@<Ê70Ê7-Î</Í<+Ë:)Ä;(´;&­:%¯<)³>-±9)¯3'º:/ÊD;ÖGAØC=Ô72×2.ç;7ì:6è2.í2-ò,-ô,,ò./ï31è71â:1Ú<1Ò>2Â6)º4)ÅB:×XRçjhú|}ÿ†‰þ€„õv}÷xýz‚ÿx‚ÿqÿi{ûbtø]oòQc÷I`ÿ:Xý?[ðO_ºQNqX:Sf8]uEa|InSv†Y{ˆ]~‹`g‚—l€œl}Ÿm|¤o}¨p€©o‚ªnƒ©l…©lˆ«qˆ®qˆ°r†³r„³oƒµp…·r‰¸t‹µv‰¬tŽ¥wš¨„°´™ÈïØ̾ÚÑÌÂÂÌ«±Á›¡±ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8[L9[L9\M:\M:]L:^K<`J<^K<_L=^M;_N<^O<^O<^O:_P;`O;aP>aP>aP>aP<bOAeMMdMW`O_aUmgb€uq’|v˜€s‘uŽ­€”͆”ß~‡îqyùclúP[ú;Mÿ*Fÿ2Qÿ<Sñ<Mà<E×@EÕCDÔBCÜCEàBCäADâBDÞDBÔC>É@8¾>3¸>1¯9+¨7'©:)­<*´<,Á=1Ï?7ß=:å99ã03â/2à42Û94æMEülaòh[ÙQCÆ</Æ:-È:.É7*Í6+Õ8/Õ4,Þ7/æ93è62é1/è/,î1/õ15ÿ2Cÿ0Eÿ-Fÿ*Bÿ%@ÿ#=ü 9ö 8÷'Aõ+Eõ.Mõ/Pó+Pô)Tÿ2`ÿAhóCXÿ`mÿhuøVeíKZñL\ëBUÚ2Cë@RÝ7CÉ-1º((±.$«8&¥?&¨@'¸?.¼:,ÝYMá]QÍG>ÍD>Á63É;7äUQÕF@É91È8-É:,È9(È9(Ä=)±?'¦<&¨;&¬=*«7(¬3(¼=4ÓLFÖGAÝE@Û96Ü30é73ì51ë0+ô1-ý,/ÿ+-ú./ô1/í4/æ81ß;1Ø>2É9.½3(À;2ÏNHáa^÷yzÿˆŠÿƒ‡ùzû|ƒÿ{†ÿx„ÿn~þew÷^põZlëL`õIaü9Wû=YîM]²JGhQ1Qd6\tDf~Nuˆ[Žc„h†’jˆ—n‰žsˆ¤t„¦t§r}¨p¨n©mƒ©l…©l…¨n‡«n…­o…¯o°l€²k‚¶n…·r‡³t‡­t§wœ¬…²¹šÈƯ×νÙÒÌ»¿Ê¤¬¿’š­[J8ZK8[J8ZK8[J8ZK8[J8ZK8[J8ZK8[J8[L9\K9\M:]L:]L:^K<^K<^K<^M=^M=^O<^O<\O<`Q>aR=aR?bQ?bQ?aP>aO;bL>hOKgNRbP\cWkjfuv”}|œx—‘z–«•Æ„’Ú}…ðuzþlmÿY[ýDLþ/Iÿ5Rÿ<Uó<Né?LãCKÝBHÖ=@ÛACÜ@AÞ@AÛA?ØC?ÐA9Ç>4½=0µ?1¬;+©8(­<,´?.»@1ÊA7ØC=Ù74á85Þ..â30æ:6Ó0'Ï5)ëUGÿwjë[PÑC7Ê<0Ë;0É7*Í6+Ô:0Ú70ß82å63ç32ê01í12ô36ý4<þ%6ÿ#9ÿ"9ÿ"9ÿ!8ÿ6ý5ø6ï2î9ð%Bï(Gî&Jñ'Mÿ3\ÿEhÿbuÿ`l÷WcñQ]òP]ïMZâ@MÔ2=Ú=FÌ7;»/.®/(¦5'¢;(›?&œ>%ª9'²8+ÒVJ»;2Ä?8¾41½2/ÎC@åWSÕHAÈ91Ä6*Å6(Ä5%Æ5$Ã:(±<(§:&¨7%­9*¬4&¯1%Â?5ÛRJÙIAáHBÞ;6Þ2.ê41í1/ï-+ü22þ,/ý+.ù+-ó++í-*æ1*ß4,Ö8,Ñ=1¿2(¼7.ÈIBÙ\Xówwÿ‰‹ÿ‡Šû€…þ†ÿ}ˆÿv„ÿj|þ_s÷XlöTiêD\õD^õ6Uñ:VàLZ¥HC^K-Mc5Uo?b}JtŒ\€–g‡˜lˆ›nŠ r‹¥vŒ¬z†«wªr~§m|¥i}¥g¥g‚¦i‚¥k‚¨mƒ«m‚¬l®h~°i³j„¶o‰¶s‰¯rŽ¬x™°„­»˜¿Å©ËʵËͶ½Åžªº‹—§]K7\K7]K7\K7]K7\K7]K7\K7^L8]L8^L8]L8^L8]L8^L8]L:]J<]K=^L>\L<\L<[N=]P?^SA`SB_R?`P@bQAcRBdQBdNAdLBjMIhKMdPYf[lnk†w{ž€…­‰ˆ²ƒ©¥‡©¾ˆ Ð‚’ây~ðsqújbÿa^ùJWñ>Që:Lî?NïCQê@Kæ<Gå>Fá<Bß<?Ú<=Ö<:Ï>9Ê=4Á;0¸:,§6&¯A0­<,¬6(¿A5ÌF=Ì=5Ð72Ú85Ü71Þ5.Þ6-Þ8*Ý<*×:'Ó6%Ù;0ðSLòZOÙE9Ç8*Í>.ÔB3Ò:-Ô3+ðGBá//î5:ó6=î,7ÿBMñ'3ú&2ÿ)2ÿ(2ù'ý"*ÿ'/þ'/ð&ð)ù+7ê .ì&7ñ-Aç#;ÿXrç-Dÿ]lÿ_iþZcùU\õPWëHMÝ?@Í84Ë>7ÄA7·?1¦7&™2!™6#š;'Ÿ<)§8-®7/ÂE?¿;7½31Ä64Å54ÔDCÛLHÚKEÑD;È:0Ä4)Ç5(Ë4)Å5*¼</³9,­/#«(³-$Ã9/ÒC;ØH?äPFßE=Ú70Ý0*ç0,ò21ù13ý14÷/1ö01ö01ó0.ò0.í2-æ5-Ý9/Õ=0¾2%À>1¹=3Ö_Yésqÿû„†û‡Šÿ„Œÿxˆÿh}ÿ_wÿ[uÿUoøLføEcñ:Yô;[æ?YÛ]i‹@;VF-L^6YuBg†Mw–]}œcg€¡jƒ¦n‚¨o€§n¦m~¥l}¥i|¤h}£f£e£f¥l¦m«l¬k~­g®f±gƒ³i‡µm‹´r°vŽ®|™´‰§½™±Á¤²Á®¦²°˜žz…‹]K7]K7]K7]K7]K7]K7]K7]K7^L8^L8^L8^L8^L8^L8^L8^K:\K;^L>_M?^N>[N=[N=\Q?^RB_SC]QA]OB_OB`NDbPFcOHeNHiMJgNQeS_g_tnny~¨€‡»‡ŠÁž•Ê£‹»«£¹xÓyƒê|{ôvjöi`ø]aóOZìFRòHSøIVõEPï?Jë;Eä9?à:<Ú::Õ=8Î?7Ç>4À</·<,«<+ª?-©8(²:,ÁA6Å<4Ç61Ô<7Ò50Ö5-×5*Ø4(Ù8&Û:&Û;%Ú9'Ý6.æA;ëMDáI<Ð>/Ç8(Ê8)Ó;.Þ;4öJFä01ð6;ö6Añ.<ÿ@Nï'4ó$,÷%(û),ý+,ü*+ø((ö((÷+,ï$'í%(ê%,ý;DÙ'ð4CüARØ&6ÿjuÿbjþZaüW]ôOSåBC×<8Ñ>6¾8,¿D5¹H6©>,™/)(’(ž-%°:6ÑTPÎHGÃ54Æ45Ñ==ëWUØGBÖG?ÐA9Ç9/Æ3)Ê6,Ð7/Î70Ç=3Â91Â5.Ã2-É4.Ñ83Ø?9ÞE=äJ@ÞA8Ú6-Ý0*ç0,ò21û03û03ô02ó12ô01ó/0ó0.î1-ç4-ß9-×=1¿3$¾</·=2Ó^Wévsÿù…ˆø…Šÿ‚Šÿt…ÿf|ÿ\vÿXtÿQoþIhü@aó:Zñ?_áI`ÁS\{?7RF.M_9ZvCe‡Ks•Yxœ_wb{¡f}¥i}¦j|¥i|¥i|¤h{£e{¡d{¡d}¡c~¢e|£j}¦l}©l}ªi|«e}­c¯c‚±c…°h‡²kˆ¯pˆ«s‹«|¬„ª‡Œ¢‹x‡€dppR^^]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8^K:_N>aP@`P@]P?\O>[O?[RC[QE[QG\OG\OI_PMcQOfTTgUUgUUgV\h]nli†sv£|ƒº‚ŠËŠÔ˜‘× ŠÊª‚´¹}ŸÏ€“䄆îvósjûeg÷S\íGQðFOöHR÷EQòAKî=Eä7=à7:Ù99Ô<7Í@7ÅA4¾?0¶>-­>-ª<+«:,¸B6ÇH?À;2»0)Ê:2Í6/Ð6.Õ7,Ø8,Ù7(Ù8&Ü9&à:*Ý4-Û4.âA9éOCÞH:È5%È2#Ù@2â>5õHDè13ò5;ù7@ø4@ÿESø2?ð)0ë#&ì$'ù13õ-/ï''ì&%õ12ë)*ö8:è+1â)1ë3=ÿR^ï=Kÿ[gþ^fñV\îOTðMRêEIÝ:;Õ74Ô?9À6,Á?2¼B5³=1¬7-¥3)¡,#œ' š%©/*ÇECÂ::¼,,È35×ABô^]Ð?:ÒC;ÐA9Ë=3Ì9/Ô=4Ú@8Û@;Û@<Ø=;Ý>;ãA?ä>>à::ã?=ëIDàB9Ý<4Ù5,Ý2+ç1-ð31õ12ø02ô02ô02ô01ó/0ó0.î1-ç4-ß9-Ø>2À4%º8+µ;0Ð[Tízwÿ“’û‡Šúƒ‰ý~‰ÿr‚ÿdyÿ[tÿTqÿNmÿFgû=_ô=\îEbßTg¢AHp;3SH2Qa<]xEf‡Nr“Zu˜^tš_xžc{£g{£gy¢fy¢fy¡cx byŸby a| bz cz¢f{¤h{§h{¨e{©a{©`}«`®`‡²jŠµn‹²s‰¬t†¦w‚žuy“no†lSeYAPM2A>^M9^M9^M9^M9^M9^M9^M9^M9^M9^M9^M9^M9^M9^M9^M9^M9^L8`N:aP<`Q>]P?ZN>YOCXPEXOH[QO_UTbXYeX_iYcl\fk^glaildqok‚rtšy~µ†Ê…ŒÚŒŽáŽ‡×Ÿ‹Ó­ŠÄ³€©½yŽÌ{Þzò‚wÿsrÿcgùU\ôMTõGPôCMò>Gï<Bå6;à88Û97Ô<7Í@6ÅA4¼A1·?.«:*­>-±=0¼F:ÌRGÇH?º5.º1)È91Í81Ó;0Ù=1Û;-Ù6'Ü6&à8+à5-Û2+à=4ìNBãK=Ò:,Ñ8*àB6ß7.ð>:é/0ð16÷4<ü8BÿNZÿLUý>Eò38â$&í/1ê,,ð22è**ë/.ò::Ñæ37Ý,2è9@ðEMÿXcóMWØ=CÚADáBFá>AÞ9=Ü89Ø88Ó97É83Â91½:2ÀA:ÍNHÖVSÐNNÃC@²72¶95ÏKIÙMLãQRïYZêRQñYVÉ51Î>6ÒB9Ð@7Ó?5ÙB9àC<â@;é?@ç8=ì9=ò?Cï:?è58ì>=öMJÞ93Û60Ú3+Þ3,å4.ì30ò21ô01ô02ö/2ö01õ/0õ/.ð0-é4-à8-Ù?3Â6'·5(³9.ËVOï|yÿ“’üˆ‹ý‰þz‡ýoücwÿXqÿOlÿFhÿ@cû9\ô?^éKdØZh…35g;0WO8WgCa{Kj‰Ps’Yt•\u˜^wby¡ez¢fw dv awŸavž`xŸ`xŸ`{Ÿaz cz¢fz£gz§fz§bz¨`z¨]|«]~­_†²g‹´nŒ³tŠ­s†¦u€qtŽii€dQcUDSL8G@^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M9]K5_M5`P9_P;\O>ZN@XOFXQKYPQ`W\g`hnfsshysg{sg}qh}ol}pq†rw—v}«z‚Á‡Ò„ŠàŠ‹å“ãŒÚ „¿žuŸ l‚¬nq¼vlÒviòsmÿllÿgiþ^`ûRWõFMï<Bê7=æ5;á78Ý98Ö=7ÎA7ÆB5½B0¸@/­7)´@3¯:0°;1ÈRHÕ\QÉMC»;0¾90Á7-Ì9/Ö>3Û=1Ú6*Ü4'â6*à3,â70ä=5åE9âF9ÞB3ÞA2â>2Û0&ê72ì0/ï.1ñ.4ú7?ÿPXÿ]dÿZ_ÿOSá.1ã03à,-÷EEè66Ü,,Û-.ë>@Ü25Ù37ÿbhà=BË*2Ê-4Á&*Õ;=á@EÛ6:Ù37ß9=Ü7;Í/0Ì43Í;;ÕGFÞRSì`cõilôekê^aÄ@>ÆE@å^[øhgÿopÿjjåKK×=;É40Ñ>7×D<ÖC;Õ>5Õ<4Ø:1Ü41î5;ñ-7ð,6ò.8ï,4ë,3ó9<þJKß3/Ü3.Ú3+Ü3,ã5.ê40ï4/ò21ô02ö/2÷/1ö.0õ/.ð0-ê3-â7-Ù?3Æ8*´2%²8-ÃNGï|yÿ’‘ÿˆŒÿ‰ÿw…úl|øatûTnýHgÿ>bÿ:_ú6\óAaàNeÂWap/+_?0[W>^lIe}Mk‰St’\u–_v™_xžcy¡cx buŸ`uŸ`u_vž_wž_xŸ`{Ÿaz¡bz¢d{¥e|¦d|§`y§^y¨Z{ª\}¬^€¬a…¯g‡®m‡ªp…¥sƒ r{•nrŠjexe[k^RbU_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N:^L4_N4`N8^O:[N>YOEZSMZTT_ZahbprmzuŒ{u‘{q“zp“vp’qt“rxšt}¨w¶zƒÄ~†Ï„‰Ú‹ŒÞ–Ü™ŠÍ›…¶¢ƒ£ª„‘«~yŸl[šQ>¼MBÔQIâWRëWUñSRñKMí>Cå4:é9<æ9;à;9Ø=8Ó@8ÊB6ÀA0º?/³9,ºA6«5+£.$¾I?Ùg\ÙdZËUI¸<2¸6)À3)Î:0Ù;0Ú6,Þ3)ä6-ß1*ä71ã;2Ý9/Þ>0ãF5äB3ß9+ß1(é4-ð31ï-.í*.ô17ÿEJÿV[ÿ]bÿ\aâ9<ã9<Õ+,ôJKâ89×//Û57Ì()Ì'+øXZÝ>BÕ9=Ñ6:º#Ä(+Ü<>æAEÝ49Ù,2Þ17Ù05Í(.Ò37äKNöaeûhnùcl÷`iú`løbkÖLLÕNJê\ZêVTçMMãHFÏ42Î3/ÙA<àKDäOHßJCÙ@8×:3×6.Ü.-õ2:û-:ø*7õ'4õ)4ø0:ÿ>CÿJJà1.Þ3,Ü3,Ý5,á4-ç4/í4/ð3/ô02÷/2ù.1ø-0ö..ñ/-ë2-â7-Ù=1É;-³1$±7,ºC=ìyvÿÿˆÿ|ˆÿqöhxö_rùRlûDcÿ9^ÿ6]ú6\ðFcÑN`¢IMe5+VD0[Y@^lIe|NkˆRt‘[w•_x™`{ždz cvž`s›]rœ\s›\tœ]v^wž_{Ÿaz¡by¡bz¤b|§b{¦_x¦[x§Yz©Y{ªZ~ª_ƒ­e…¬k‡©m‰§s‰¥u„s|”ru‰pnlfwe_P=_P=_P=_P=_P=_P=_P=_P=^O<^O<^O<^O<^O<^O<^O<_N:aP6aP6aO9^O<[OA[RK\VV_Zakgvso†}z—‚~¡|¥}w£{u¥xv§sy©s}°x¸{„¿~†Ä„‰ÉŽÎ”“Íš“Ç •½«›µ¼¦²É­©Å¦”ªˆmœfJœE2¯A4¶@4ÂB9ÖHDèNNîJKì?Cë=?é;=ä<;ß=:Ù@8Ð@5È>1Á=0½:0¾?6¯4,§1'»I?ÑcVÖh[ÕeWÃOBº>2º4)Ç7,Ö90Ù5,ß2+ç60â0,ã4/â7/Þ7.à>1åC4ä>0Þ4%æ4*é0+ð3/ð..ï-.ò14ó78öBEöMRüY^éFKöQWØ37ëFJÝ8<æAEÚ7:Î.0Ñ05äHKÒ7;Ð7:¹#%Õ;=Û8;å;>ë<Aç6<â-6Ý)2á1;ç<DðLSý]eÿksÿjsú`jöZgùXh÷[fôddèZVèWTØ@=Ï10Ô44Ó33áC@ãJEéRKêSLáJAÙ?7Ø93Û81ã33ó.7ÿ0>ÿ0=ú*7ü.:ÿ;EÿCHûABã1/ß4-Ý4-Ý5,â4-æ3,í4/ñ40ô02÷/2ù.1ø-0ö..ñ/-ë2-ã7-Ø:/Í>0µ1%±7,²;5ésqÿŠŠÿ‡ÿv†þi}óató[p÷PjúCbÿ7`ÿ7aù;_ìLf¿O[~86]=0NF1VX@ZeEcxMj…RrŽ[v”^yša{ždxžas›]p˜Yp™WqšXqšXt›\uœ]y_xŸ`x¡_y¢^z¥^y¤\x¤Yx¤Wy¥V{§X©_‚¬d„«h†¨l‡¥o†¢q€šmx‘jq…ij~cbv]_P=_P=_P=_P=_P=_P=_P=_P=^O<^O<^O<^O<^O<^O<^O<_N:cQ9cQ9aP<]P@ZPG\TR_Zaa_mtrŠyx˜€¨ƒ°~~°yy¯yu°wwµw|¾x€Á}…Ä‚ˆÄ…ŠÁ¿—–¾ ¼¬§»¶¬µ¾³±È¸«Ð¾¦ÖÁ¢Ñ»–Ьˆ¯oT®\G¤G5¨>0ÂG?àWQïWVñNOé@Cê=?æ<=â=;ß=:×=5Ñ:1É90Á80Á<5¹:3¸=5ÁOEÇXMÇ]OÑeXÓcUÂL>¼:-Å8.Ò91×4-ß2,ç60æ40á2-à5.ã<3çC7æC4â:-ß3%ê5,æ.&ð0-ï/,ð31ñ54ç-.â24çBF÷X]öW\ÿouåDJëHMà<Cþ[`ÿouÞ=Bÿ}‚ÿmqêQTÔ>@Æ02Ö:=òHKî9>ð7?ø=Fò7Bè-8ô>Jÿ]gÿmwÿjrÿcn÷]gú^kÿaoÿ]nùYeò\]ãPIâJGÕ74Ò/0Ù54Ò0.Ø95ßD?ãJDâIAÙ@8Ó6/Ö4/Ü71è66ê'/ü0<þ2=÷+6ù0:ÿ>Eý?Aì44â3.à5.Þ6-ß4,á3*è3,ï4/ô41ö01÷/2ù.1ø-0ø..ò/-ë2-ã7-×9.Ñ?2¶0%²6,°61èpoÿ‡ˆÿ†Žÿp‚ücxñ\pôXn÷OiûBbÿ9aÿ<döAbäRg°QWd/'WD3GG/RT<U^?btLiQq‹[v’_z˜b|dxœ_r™Zn—Un—Un—Uo˜Vr™Zt›\w›]wž]wž[x¡[y£[w£Xv¢Wv¢Uw£Ty¥Xz¤Z~¦_¦c¡d~œf{—frŒ]i‚X`vRZoPRgH\L<^N>`P@`P@_O?_O?_O?aQAbRB_O?]M=]M=aQAcSCbRB`Q>dS?aP>]P@^QI[QPZSZeapsq‰yxšz|¥~€±€¹}ºxz·rs´lo¶twÈv{Ì€ƒÊ‹Æ–—䤾²°»¼¹´ËƳÓÌ°ÙϬÛϧÜÏ£ÝУÙ˜٘Ѩˆ¸€g ^FËzgÖue½H?×QN÷ccéKLå?Aâ89ä::â:9Ü75Ù61Ö;6Ë81À5.ÇB;»<3¿I?ÆXK¹OAÎdVÑcTÌXIÅG9Ä:/Í6-Ø7/á6/ã4/ß0-ß2,à70ä=4à<0Ý7)ß5(å7,ä/$ê/&ì/)î1-î20ë40è51â64×79æJNõY]íNS×8=×6<ùX`ÿ~„ÿ~†ÿouÿgoÿipÿflõ\añX[ûZ_ÿUZÿDKü8Bû7Aö2>î+9ì0>ñ=HÿS_ÿ`iÿgrÿepþbmÿcnÿ`oý]gíSSßF@Ö85Ö41×11×/.Ø31Û94áD=ÜB:Ù?7Ö<4×90Û81à93æ66ð7<ó4;ó4;ö4<õ6;ò59ë33ã1/Þ3,Þ5.ß7.à5+ä3+é2,ï2,õ20÷12ø03ú/2ù.1ù//ó0.ì3.å7.à?5Ì8,¿6,¯/&¸;7ÒXWÿ˜šþ{ƒÿm€ÿe|ø\rðPhôGeüCeÿ;dù9`õNlÓRd‰=?P, C;&CG.KM5Y_CZjEcxMqˆZx’bx–`t•\r–Yq˜Yl•Sm–Rn—So˜Tr™Xt›Zuœ]uœ[t›XtWv Xw¡Wv¢Wv¢Uu¡Tt S{¥[{£]zž^u—[m‹Ub~MXrCSj>AW0?U/<R,[K;^N>`P@`P@`P@_O?`P@aQAbRB`P@_O?`P@bRBcSCbRB`P@fVG_QF\OG^TSaZad`omkƒvw–wy¢{}®}¸x|¹quµkp´lo¶nq¾uvÐ|~Õ‰‰Ó˜˜Î¨§Ç¸¶ÁÉźÓαÛתâÛ¥çÞ¥æÝ¢äÛ¤âØ£ÛÑ ÔǛӼš»œ€©}dÅ‹wÊ}m´VJÒa[örpìZ[çKLã?@ç=>ë>@ç;;â66Û64Ö=8É83Ê?8¹6.¸>3½K@¶H;È]MÝo`Ô`QÆH:½5)Ä0&Ô6-Ü5-Û0)â51å95ä=7à<3Ü8.Û5)ß4*ã5*ì7.í5+í2+ë0+ç0,ã2,á4.Ý52Ö87Ø>@äJLóW[ú^bü\dþ]eÿaiôS[ïNVñQYÿ_gÿjqÿflõZ`óNTí4:ñ,5ô*6÷-9ñ'5å!-æ'6í7CþPZÿZdÿblÿdmÿenÿcmý[hõQZåEEÞ<7Û64Þ63ß55Ü30Ú2/Û62à>9Û>7Ø;4×:3Û81ß82å95ç:6é9;ê7:ë7:î79î79ì65å31ß2,Ü3,Ý6-ß7,â6,å2+ê1,ò1,õ20÷12÷03ú/2ù.1÷//ó0.ì3.å7.ß<3Ô=2Â8.¶1*·74ØZ[ÿ“ûs}ÿfzÿ^vùWo÷OiùFfû?bü<cô@cåOh¹KVx;8L2#<:#<B(EG/OS8VdA`rJnƒXu_v“]t“Xq“Vp”Tk’Ok”Pl•Qm–Rp—Vr™Xsš[sšYt›XuWuŸWuŸWtžTržQqRpœQn˜Pl”NhŒLbFXu?Ni6F]/@W+@W-@W-AX.YL<[N>^QA^QA^QA^QA_RB`SCaTD`SC_RB`SCaTDaTD`SC^PCbUM\QM[QRcYbkdtqm„vu•y{¤y{¬y~¶x|»nsµei°`g¯jn¸ruÆ}}ׇ„Ý—”Û©§Ø»¹ÏËÊÈÜØ¿åá´éäªíè¦ðé¥íå¤çá§âÛ§×Ï¡ËÃœ¸¯©››ƒk¨ƒp§o`œRGº]UÝmi÷uuï__äJLå@DëADì>@è8:â66ß=:Ô;6ÔA:Â70·7,·>3®=/¶F8Ûj\ßi[Ù[MÊB6Å2(Ñ4+Ù6-Ù2,Þ52éA>ìGCà=6Õ2)Õ1'Ú2'Þ0%æ4*è1)ç.)æ/)ã2,â7/á=4àB9Æ-(Ê43ÜDCðVXú^b÷ZaóS[ñQ[èFQêHSïOYü\fÿmvÿntôY_ã>Dé.5ô-4û2<ü2>õ+9í'4ö6EÿKW÷ISõPWøW_þ^fÿckÿ`i÷RYéBIÞ97Þ71ã75é<8ë;;æ95á51Ý60Ý:3Ù;2×90×90Ü71á83ç:6é<8ã99ã99å97ç98è88æ74á40Û2+Ú6-Û7-Þ8,â6,ç2)ë0)ó0,÷10õ12õ13ø02÷/1÷//ò0.î3.ç6.Ý90ÜD9Ç80»4.µ/.ä_bÿƒˆølwþbxþWsúPmþLlÿCfö:]ó;_ìIfÔSgDJl;4O>,=<':?(ED/FH0Q\<YkEg|Qr‰[tZqUmRkOiMi‘Ki’Lk”Pm–Tn—Up—Xq˜WuœYuWtœUrœTpšRm—Mk•Mj”LeGaˆE[AUt;Li3E`-AX*>U'B\/E_2Ic6WJ:ZM=\O?^QA]P@^QA_RBaTD`SC`SC`SCaTDaTD`SC_RB\PDZOMZQVbXcjcsqm†vu•xz£z|­w|´sy·mr´bi¯]d¬ag±lr¾x{ʉ‰ß•‘夡䶵áÇÄÙÕÑÎáÝÄçä¹ëæ¯îê­îè¬éâ«ãÛªÚÓ©Ë¡»¶™¥¥›™„“ˆv˜q™rc›bW³i`Ïrmû‹‰õutê[]æLNèCGí@Dì<?é;<ß:8Û<8ÞE?ÓC;Ã:0º:/°6)§1#¿I;ÛaRêk\ÛSEÉ:,Ì4'Ô6+×4-Ù42ñMKþZXíKFÙ80Ö3*Û4+Þ2(ß.&á,%á,%Þ-%Ü1)Ú6,Ù;0×?4Â/'Ä4,Î:6ÙCBßFHàEIäGNêMVñQ]öVbøXbù\eÿgpÿmuôYaÞ;@ê17ñ.4ò-6ð+4ë%2ì(4û=IÿS_í?IèAIêGLôQVÿY`ÿX]ôGMä68á53ä73ê;8ò@>ô@?ï=;æ95à72Ý82Ú91Ù80Ù80Ü71ã73è96é:7â:7à;9ã:7æ:8ç:6å84à5.Ú3+Ú6,Û7-Þ8,â6,ç2)ë0)ò/+ö0/ô22ô23÷12ö01ö0/ò0.î3.ç6.Ü8/àF<É91¾3.¶,,îfjÿy€øgtÿbyýTqþKkÿGjÿ>cò6Yë=^ãQhÄXeˆBBgC7[N;GF1AC-JH3EE-LU6Sc>btLlƒUp‹XnRkPiŽKgIhJh‘Kj“Mk”Pm–To–Wp—Vt›Xs›Uq™So—Pj“MgJeŽHdG`‡D]AWy=Rq8Mi6Lf6Ne7Of8Lf7Oi9Sm>UH8WJ:[N>\O?]P@]P@_RBaTD_RB`SCaTDaTD`SC_RB_RB^QIVMR_Xhnf{tp‰xt—xw¡xz«y{´sy·jr³`g­[c«_g°jr»v|Æ€„Γ•àžžä­®ç»½æËÉßÔÓØÝÛÎáßÆåá¾æâ¼äß¹à׶ÚеÎƱ¾µ¦­§›˜šŒŒŽ€‰…yŠ|q‘vk›si¨meºoi扄î~ósrñedñWYðMNîDEì@@ã:7à;7äB=ÞE?Ì<3Æ=3ÄB5¯1#®0"ÇI;ÜXKÖN@Ì=/Î8*Ð6*Ñ3*Ö42õUUÿkhú]XãD>Ü;3ß;2ã80â4-ã2,â1+Ý0)Ô0'Í/$Æ/$Â0#Å9,À4'Á3)Ë:5×CAÛEGÛBGÚ@HàDOëOZòVaòVaú^iÿgoóYaáBGê:<í57í38ï28ñ3=÷9CÿHSÿV_ä6?Ý4;ß6;ëADùJOüIMô;Aé13è51ë95ï<8ò<9ó;9ð:7é73â70ß;2Ü;1Û:0Ü90ß82ä73è64é75æ:8ä;8æ:8è:9è;7æ95á6/Ü3,Û7-Ü8.ß9-á7*å3)é1)ñ0)ô1-ó32ñ33ô22ô01ô1/ò0.î3.ç6.Þ7/àC:Ê70À1-À13÷jpÿqzúftû]túPmÿCfÿ=dÿ9cõ8^æEdÙZm«V[wE>dJ=aYFTO;KI4PI6GE.GP3L\8ZlFf|Nm…SmŠRlŒMhJfŽHgHg‘Ii’Lj“Ol•Sn•Vo–Ut™Vs˜Un•Rj’LfKcŒHaŠF_ˆFZBX|?St;Pn8Ok:Rl=Wn@ZqCUo?Vq>WqARE5UH8XK;ZM=[N>\O?^QA`SC`SCaTDaTDaTD`SC`SCbUEaVP^Vcje|yu}yšzy¡xy©vy°sw´jr³cj°[c«]e®hp¹v~LJшŒÓ™Ý£¥à¯³ã»¿åÆÇãÏÎÞÔÓØ×ÖÑÙ×ËÙÖÇ×ÑÅÒÉÀÌþŹ¹´¨¬£šŠ‹†x{tyvquleleogŽa[`[ÀsmØyuð{ü|yÿrpýccöSTðHGïC?ê>:á<6àA;Ñ:1ÓC:ÝTJÂ>2¸6)½9,Â=.È?/ÏB1×C5Ö@1Ñ7-Ð2/êLMú_]òWSßD?Ù:4Û81à70æ93ç92ç92â:1Ú9/Ñ9,Ê8+Ä8)°(¸3"È@2ÓI>ÒD@Ë;:Ì7;Ï:@Ñ7AâHRíV_ðYbõ^g÷`iêU[ÜAEå@>ì?;ñACúGJÿLTÿQYÿT]ÿV^á4:Ú/5Ü/3ç7:ô=Aø;?÷48ó12í42ï95ð86í42ë20ê20ç40á4.ã<4à=4ß<3Þ;2á83ä73è43è43è88ç98è88ë99ë97é75â5/Þ3,Û7-Ü8,Ý:+ß7*ã2(ç0(ï0(ò1,ñ42ð43ó32ó11ó1/ñ1.ì3.ç6.à91Ù<3Ì71Á0-Ñ@CÿnuýkuùbqðRiõHfÿ;aÿ4^ÿ6bû>däNiÊ\i‹GFjF:]L<]VCXQ>RJ7OG4ID.DJ.GU2Sc>^sHgMj‡OjŠKgŒGgŒFfŽGfHgJi’Nk”Rm”Um”Uq•Uo”Qj‘NgŽKcŒH`‰E_ˆF^†G\‚E[~DWxAVr?Uo@YpB]rG^uG[sCYtAXs@NB2QE5UI9WK;XL<ZN>\P@^RBaUEbVFbVFaUE_SCaUEfZJh]YngwupŽ|x™{y wx¦vw­pu¯jo¯ah¬^f®_g°em¶pxÀ}…ؙ͉ؗ Ö¡¨Öª±Û´¹ßº¿ßÀÁÝÃÃÛÇÆØÆÃÔÅÁÐÁ»É¼³Ä»°Áµ¨¼¦˜¯–‹œˆ…Œqqqtpopfewhe†nj„_Y•d_›ZT¹f`Ùsnðzvÿ{wÿwsÿhfüZWþRNõHBæ=6çD=Ø;4ÛG=ê\RÅ;0Ä<0½7+¾6(Ç>.ÑD3ÔB3ÔA1×A3Ò86Ø>>ÝCCÜB@Ö=7Õ81Ø7/Þ7/å:3æ93å:3â;3Û>5ÕA5ÑE8ÌG6®-¼;%ÍJ8ÑL=Æ=5»0+À00Ê9>×AJáKTëU`ðZeð]eìYaßLRÔ>@Ï4/Ø7/à;9ê@@òCHõDJñBIî?Fâ5;ß26ã36ï8<õ79ø14û/2ü14ï20ð95ð74ì0.è,*ç0,æ3.à3,ä=5à=4à=4à<3ã:5æ95ê65ì65ì57ì57í57î68î66ë54ä2.Þ1+Þ7.Ý9-Ý:+ß7*á4&æ1&í1(ñ1,ð42î53ñ42ò21ó1/ñ1.ì3.ç6.â;3Ò4+Ò:5Æ20çUXÿpxùcnòZiçI`óEfÿ8bÿ/]ÿ5bÿBhÜLe±PYj5/^G7XK:UN;[P>VI8M@0JC0@F,AO.K[6Xj@bxGfJhˆIf‹FeŠDc‹BcEeŽHgLh‘Oi‘Rk’Sn’RlPhNd‹JaŠH_ˆF_‡H_‡H_…H_‚H]~G]yF]wH`wKcxOczN]uC[vAZu@JC3MF6QH9TK<WK=YM?\O?^QAdWFeXGdXHbVF_UIaWMg^Ulcfwr‰yušxvžtsŸrr¤tu­lp¯bg©Za©_e¯fl¸ms¿v|ȇӓݗœÞ›¡Õ §Ó©­Ú®³Ý±´Ý²´Û´´Ú¶´Ûµ±Ö³­Ñ®§É«¡ÄªžÂ¤˜¼™‹¯ˆ~™|x†dbgiefcYZj[X{c_yVP’c]ŠNF¢UM½`XÖkcñwrÿzÿzwÿnjþa\÷TOéGBîOIÝB=ÞG@êWOº,"¾1'¾4'Ç>.ÑE6Ë>-Á2"Ê7'ÛE7ÞE?Ó97Ì3.Í50Ô;5×=5Ý<4á=4ä;4ä92Þ5.×4+Ï5)Ê8+Å<,Â?-ÔS>ÈG2½<)¾:-Ã=2Ä;5Â74Â43ÜKNÞMRáPUåTYèY]åVXÜMOÓD@É5+Ñ7+Ø7/Ý52â24å26æ18æ.6ì4>ì3;ó5?û9Bý4>ú+5ÿ(3ÿ/9ø-3ù57ù59ð./ë*+é0.è51â5/ã<4à=4à=4á=4ä;6ç:6ë76î66ì46ë35ì25í34í55ê41ã1-Û0(Þ8,Ý:+Ý:+Þ8(à4&ã3$é3&ì4*î50î52ð42ð3/ò2/ï2,ì4,ç6.ä=4Í/&×>9Ì35ùbgÿoy÷[iðNcêC]ùEhÿ:eÿ0]ÿ6aöGhÉJ]“CFR,#VI8SL:OH6[O?UI9F?-HF1>B'@J(IU1Sd:_rEe}Ig„JeˆHcˆCa‰BbŠCcEeŽHfMhPiQlPkMfJcŠIaˆG`‡F`‡H`†I^G^F_}G`|Ia{Kd{Mf|Nf~N]xC]z@^{CDB6FD8JF;PG>RH>WI>]M>_O?`Q>aR?`SB_VGbYRgb_ojnso~wq“zt |y¨yw©pp¦gg£`a¢\_¤`b­fhµopÀyzÌ„‚Ö‹ß–’眙栞ݡ¡×££Ù¤¤Ú¦£Ø¥¢×¥¡Ô¤ Ó¥žÑ£Í¢šÉ¢™ÈŸ–Ù»Ž‚°ƒ|žrn}igld^`fZZkYUrWP}WNŒWO•RI¨ZPµXPÁZSØkdìyrù‚|ÿ‹†ùuqÿusí_]ßPLÙEAïZTÌ71Å2*Ä6*Ã7(À7'Ã7&Æ9(Ê;+Ð<.Õ?1Ò8.Ö<2×?4Ó;0Í5(Í3'Ø:/â@5à90á90Þ7.×7+Ï7)É:*Æ?,ÄA/Â=.Æ@4ËE:ÍG<ÌC;Å<4»2,¶+&Ç<7ÐEBÙOLàVSãYVáXRØOIÐC:Ì;*Ó:(Ü8,â5.è./ì*2ð(3ô'6ú->ú+?û*?ý)?ÿ(?ÿ&?ÿ$<ÿ$<ÿ$8ÿ'9ÿ+<þ,9ó+5í.5è45ç;9Ý84Ý:3Þ;4à;5ã:5æ95é73ë54ë35ì46ë54é54ç53â5/Ý5,Û5)Ü8,Û9*Ü9(Þ9&ß8&â7%ã6%æ4&ì5-í4/ð50ñ4.ñ5,í5+ê5*å7,à90Ø7/Õ:6Û?BÿmwÿbsûSjõIcÿKjö6[ÿ6_ÿ<gø>cçNj¯IV^$"D, ?:'HE4PM<PI9EB1>C/?G/BH&EK%KS.S]8[kDavKd~NdƒJb†F`ˆBa‰@c‹BeFhJlPm‘Ql‘LiŽHgŒGf‹HfŠJe‰Ic…HaƒGdƒJdIbGc~GdJdHe~Ga}C[{<\=_‚B=?4?A6FC<JE?PE?TG>[K>]M=`O;`Q<^SA^VIc[Xhcinlyso†tp•vpžtp¢pm¢gfŸaaŸ]^¡\\¤ed°kjºtrÅ}{φ‚Ù‰à”Žæ˜“å›–Ùœ˜Õ™Öžš×ž˜Ö—Õœ–Ô›•Ñž–Ñœ”Íœ“Ê›’ǚē‰»ˆ®‚xtk|mdif]^f[YiZSoWM{UJŠVKšVK°\RºYRÁXRÓfaàqjãvoí~wý‡…ÿ‡…÷usîgdãUSëZUÇ2,Â/%Å7)Ã7&À7%Á8&Ä8'È;*Ï;-Ó=/Õ9,Õ9,Ó:,Ò:,Ñ9+Ñ9+Ô8+Ø8,ß;1à90Ü8.Ö8,Ï9*È9(Á:&¾9&¾6*Á80Æ=5É@8ÊA9È?7Å<4Â91¿4-Ç>6ÑH@ØOGÚQI×NFÌC;Ã7*Ê7%Ó8$Ý7)å4,í//ô+3ù)7ý(:ÿ+@ÿ*Aÿ)Aÿ&Aÿ#@ÿ!<ÿ=ÿ:ÿ:ÿ 9ÿ%;ÿ);÷-9ð19ê7:å;;Ü94Ü:5Þ;4à;5ã:5æ95é73ë52ë35ì46ë54è64ä71ß6/Ü5,Ù5)Û9*Û9*Ü9(Ü9&Þ9&ß8%á8%ã6%ç5+ê3+ë4,ë5*ë5*ê6(ä7)á7*ß;1Õ4,Ó54óTYÿesÿ[põGbÿIhÿAdÿ;`ý3[ù;aòMmÍLb‰8?S*$A5'69(;<,B@1DA0@?-=B.>G,=CKP'\b<eoJhvRezQd~Od‚LaƒFa†Aa‰@cŒ@gDiŽHkMl‘Nl‘KjGhHf‹FgŠJf‰If…JdƒHfƒKdIdHd€FeGeGfEb~A]€>_„?b‡B69.:<1??7DA:KB;OE<VH=YL<^O<\O<\SB^WMc]]helom{sq‰so”qk™jf˜c`•\[”ZZ˜\] \_¦hjµno¿wxÊ€Ò†„ØŠˆÜ‹à‘ŽÝ“Ó“‘ÑÑҔѓŽÑ“ŒÐ’‹Î•ŒÍ“‹Ç”‹Ä”‹À“‹¾Œ„³ƒz¥€r•|ewu^fi[[d[Vd[RfXKrVH„TH£ZQ½`YÉ\YÏYWÛcbákißokãvqûŠ„ÿŠ†ÿ…ÿ}y÷nhîaXÄ4+À2&Ä8)Á:'À9&À9%Â9&Æ;(Ì:+Ð:,Ö:-Ó5)Î5'Ð8*Ô>/Ô>/Î6(Ë/"Ú:.Ú8-Ù7,Ö8,Ð:+É:)Â9&¾7$½5)À6,Â8.Ä:0Ç=3Ê@6ËA7ÌB8Ç:1Ê@6ÏE;ÐF<ÒH>ÑG=Ê@6Å7+Ì6%Ö6&ß7,ç4/ñ03ö-5û+9ÿ*<ü';ü'=û%=ù#;û!:ú7ü7þ6ÿ8ÿ6ÿ$8ý*;÷2<ñ6=ë8;ä::Ü94Ü:5Þ;4à;5å95ç85é73ë52í36î47í55ê65å61á6/Ü5,Ø4(Ú8)Ù9)Ú9'Û8%Ý8%Þ7$à7$á6%á5'â4)ã5*ã6(ã6(á7(Þ6)Û7+Ý<2Ð1+Ø88ÿkrÿ]nþPiñ<[ÿHlÿ7]ÿ>eù5[î>bæVqª?Qa#(L/);7+07'37&9<)@=*A<(@>)BB&?FXa4s~T€Œdw‡`hSa}La€G`ƒC`…?a‰@cŒ@hŽEjJkMl‘Nn“Mk‘HhHgŒGh‹Kh‹KfˆLd†Je„KdƒJc€FdGf‚Hf‚GeFb€Bc†DeŠEhH25*58-;<4A>7G@:KB;RE<VJ<XL<YM=YQD^WOc^bigron€roŒrm•jg”`^WW‹TUŽWX˜\_¢ac­ln»rsÃ{|΂ƒÕˆ†ÙŠˆÛŒˆÜŠ×ŽÒΌώ‹Ð‰ÑŽˆÐŽ†Ï…Î…ÊŽ…Æ…Á‡¼‡¶‰‚¬€xoŒ€_p|Y`lXYd[T^_Q_\IjWF}SEžUL¾\YÐY[ÙX\äcgçkkáplåxsì}vízsþƒ~ÿ†ÿ{õkaÉ<2Ä8)Â;(¿:'¿;&¾:%Á:&Å:'È9)Î8*Ø:.Ô6*Î5'Î8)Ñ>.Ñ>.Ë8(Ç/!Ò6)Ó5)Ò4(Ò6)Ñ9+Í<+È=*Ä;)Ä:-Ä:/Æ90Æ9/Ç:1È;1É<3Ë=3ÓD<ÓE;ÐA9Ë=3Ë<4ÏA7Ï@8Î;1Î5'Ù5)â5.ë31ò/5÷+6ù)7ü):ù&9÷&;÷&;ø'<û&<ý%:ÿ$:ÿ#:ÿ"7þ#7ú%7ù,;÷5>ò9?è8:à87Ü94Ü:5Þ;4à;5å95ç85é73ë54î47î47î66ê65æ72á6/Ü5,×5*Ø8*Ø8(Ø8(Ù8&Ú7&Ü7$Ý6$Ý6$Û5%Ü6(Ý7'Ü9(Ü9(Û:(Ù9)×:+×:1Ð3.ëHKÿoyÿVjøD_ø<_ÿAgÿ3\ÿ8bø>cèMlÅOe€0=J C1-11'.6'4=,=B.B@+B<$E>$HE$U\0p~MŸr—¨|ƒ˜mj„W_{J]~E_ƒCa†@bŠAfCkJl‘Lm’Om’Oo”Nl’IiŽIhHiŒLiŒLhŠNg‰Mf…LdƒJdGe‚HgƒHh„If‚Gd‚DgŠHiŽIl‘L-3'36+891<;6B=9G@:MD=QG=SI=SK>UNDZUQa^eigumklkŠjhb`XVˆPP†QQXYš`cªfj´orÁuxÉ|Ђ…Ö†‡Ù‡ˆØŠ‰Ù‹ŠÖ‹ŒÏ‹ŠÌŠ‰Í‰‡Ð‰…ш„ÑŠƒÑ‰‚ÐŒ„Ï‹„È…Á†º†°‡¥~w–m…„Yj€SZnVTc\RZaOZ_HeZDxUB’LD¸TRÐSWÛRYå^dèejãklæuqäunâoh÷~vÿ‚{ÿ‡~ôl`É?2Á8(À;(¿='¿='À<'Â;'Å:'Ç8(Í7)Ø:/Ù8.Ò8,Ï9+Ì:+É:*È9)É7(Ï9+Ñ7+Ò8,Ñ7+Ï7*Ì8*Ë<,Ë>-Ê<0É=0Ê<2É;/È:0Æ8,Å7-Å5*Ð@7Ð@5Í=4É9.Ë80Î;1Í:2Ì5,Ð/%Ù0)ä20ì25ô/8ù-9û+;ü,<ü-?û.?ü/@ü/@þ/Aÿ/?ÿ-?ÿ.@ÿ)9ü)8÷+7õ0:ñ6=í8=ã77Ü43Ü94Ü:5Þ;6â:7å95ç85ê65ì44ñ48ñ48ï56í76æ72á6/Ú6,×5*Ø8*Ö9(Ö9(Ø9&Ø9&Ù8&Ú7&Ù8&Õ8%Õ:&Ö;'Õ=(Ô=(Ô=*Ô=,Ô<.Ñ7/Ú;8ÿ^eÿaqÿPi÷<[ÿAiÿ4_ÿ4`û1YôKlÛYq•>NZ%-C),:2/-0)08+7@/:B+<<"A<UH(`[5{…S£lª¾‹¨¾Ž¥wo‹[aK^F`„DcˆBeDj“Go”Np•Po“So“So”Nl’IiŽIgŒGiŒLiŒLi‹OhŠNf…Je„IdƒHe„Ig…Ih†Hg…Ge…DiŽIi‘Kl”N+1%.4*470893>:7B=:HA;KD<NH<NG=OJDWSR_^ffeugggf†ba‰[YŠQQ…NO‡RS“[^£ei³lo¾uwÊz|ÑÖƒ…؆‡Ù†‡×ˆ‡Õ‰‰Ó‡ˆË†‡È†…Ë…ƒÎ…€Ð…€Ò‡Ò‡€Ð…ÒŒ…Ë…ÁŒ…¸‹…«„{v|jz„VcPVnUQd^P[eMXbIb^EsXCOE´WRÐUZÚSZç\cèagågjèpoìyræqh÷|tósjþxmæ\QÄ;+¾5#Â;'Á=(Á=(Ã<(Ä;(È;)Ë9*Ï7*Ö5+Ø7-Ô:.Î:,Ç:)Ä8'Æ:)Ê=,Ï=.Ö@2ÙA4Ö>1Î8*È4&Ê8)Ë<,É:,È:,É;/É;-Ê:/È9+È5+Ç5(Ê6,Ï;/Ò>4Ó?3Ö?6Õ>3Î7.É,#Ò+%Ü-*ç02ð39ö1;ú0<ý0?ý0?ù0@÷1@÷1@ö0=÷/<÷-9ú,9ú*7ý/<ù/;õ0:ð3:í6;æ69ß55Ù42Ü94Ý:5ß:6â:7å95ç85ê65ì44ò59ò59ð67í76æ74ß6/Ú6-Ö6*Õ7+Ô8)Ô8)Ô9'Õ8'Õ8%×7'Ô9%Ð9$Î<%Ï=&Ï?'Î@(Î@*Ð?.Ò;0Ñ61ëHIÿfrÿOdÿHfû7[ÿAmý/]ÿ7aò4XãPj¼Ufm19E(*E697325406906=-3;#38CCja:…TŸ®w©Á‡µÎ—¯Ç“’®}v”be†Q`‚F`…BcˆBgFm–Jr˜Or—Rq•Up”To”Nl‘KhHf‹Fh‹KiŒLi‹Ni‹Og†Kf…Je„If…IhˆIi‰Hi‡Gf†CjJk“Mn–P(0#+1'/4-350764<85@=8C>8IE<HE<KHCRPQ[[eabtbb|``‚_^ˆZXŠTTŠTT\] gi³psÄvxÍ{Ø~‚Ûƒ„Þ„†Ý„…؃„Ö…„Ô†…у†Ë‚…ȃƒË‚̓€Ñ…€Ôˆ€Õˆ€Ó…Ò‹„È‹ƒ¾‹ƒ²‰‚¤|“wp€veo~U[|PQnUNf_O]eMZdIaaGq]E‰TF­]TÈZ[ÔVZâ[aæ]déaeîllõzsírj÷xoÞYPå[PÒD8Ã5'Ç:)Å:'Ä<&Å='È=(Ê;*Í:*Ð8*Ô6*Ó0'Ô3)Ò8,Í;,Ç;*Â;(À;(Ã<)È;*ÕC4áK=ÞH:Ó=/Ê4&É5'Í;,È9)È9)È9+È9)Ê8+Ê8)Ë7+Ë7)Í6+Ò<.×?4Ø@3Ú@6ÛA5×:1Ò1)Ü0.å14î49õ6>ù4>ù1>ú0@ø/?ò.<ï/<í/9í07ï-5ï,2ò+2ñ*1õ2:õ3;ò5;ì59å57á55Þ65Ü75Ü86Ý97ß:6ã:7æ87é77ê67ì46ô5:ô5:ñ7:î87æ74à70Ú6-Ô6*Ó7*Ñ8*Ð8*Ð9(Ð9(Ð9&Ñ8(Ð9&Ë9"È:"È>$Ç?%È@(È@*Ì=-Ï;1×96üU\ÿ^qÿGcÿ?aÿ:aÿ7gþ3bû8`íFdÅNa‰@IS12A64@:<:46?56<7179+4="9CSZ.‚‚P¢§q±ÅŠ¯ËŽ°Ì’¦Ã’®}{™egˆQ_E^ƒ@c‰@iDo•Js™Ps˜Sq•Uo“Sn“NkJgŒGeŠEgŠJh‹Ki‹Ni‹NfˆKd†Id†IeˆHgŠJh‹Ii‰Hf‰Ej’Ll–No™Q&.!(0%-2+13.331764:95<;6GD=DD<GFBOOQZZd_ap^`y\\~`_‰\ZŒYX‘\\šgg­qsÀz|р܄ႅ䅆ㄅჃۂՃ‚Òƒ‚΄‡Ìƒ†É„„̃‚Î…‚Ó‡‚ÖŠ‚׌ƒÔ…ÐŒƒÄ‹‚·Š‚«…›xˆsnuqbevWUtSLjVKf_MbfM_eIcbFp^FzQ?[M·ZSÅSR×VZâW\êY`òce÷rmñnf÷qhÑD;ÔA7Å1%È4&ÔC2Ç9%Ç:&É;'Í<)Ð:+Ó:,Ø8,Ù7,Ï,#Î0%Î6)Ë<,Ç@-Á>*¾;'¼7$À4#ÑB2ãOAäN@ØB4Ë7)Ë7)Ð>/Ê;+É:*Ç8(Æ7'È6'Ê6(Î8*Ð8+Ó;.Õ;/Õ9-Ò6*Õ7,Ú<1Ý<2Ü71è88ñ8=÷:Aû9Bú4Aõ/<ò,;ï,:í/;ê19ê38ë48í57ñ56ô36ó57ð37ï6;í9<é69â45Ý33ß76à;9Ý86Þ97á96ã:7æ87é77ê67ì46ô5:ô5:ñ7:ì89æ95ß82Ø7/Ó7+Ð8+Í:*Í9+Ì;*Í:*Í:(Í:*Ì;(Å9"Â:"Ã=$Â>%Ã?(Æ?+Ê<.Ï81ß<?ÿ\fÿQhÿIfÿ9]ÿ=hù.]ý<hé;\å\p¦LV^..G83BC><89?48E26C41=:)>E&FU*bs?›a­½±ËŒ«É‹¦Ã‹º„Ž¬z{™ef‡PZ|@^?a‡>hŽCo•Jr˜Or—Rp”Tn’Rn“NjIf‹Fd‰Df‰Ih‹Ki‹Ni‹NfˆKe‡Jd‡GeˆFgŠHh‹Gh‹GeŠDk“Lm—OpšR(0!'/"(-&).(.0-3317839:4==5?@8DE@JLKORYVXeZ\s]^}YX‚[Y‹^]–ee£nn¶wxÈØ„…⌌ðŠŠì†‡ä‚‚Ü€€Ö‚€Óƒ‚΀ƒÈ„ǃƒË„„ΆƒÐˆƒÓ‹„ÒŒ„ÏŠ€ÅŠ€¼‰€¯‡}Ÿ€xwozkegf]Xm[Qm[Mi\Lf^Kd_IeaHhaGo_FoP;…UA¥]O¿aYÑYXÝQTîS[ø\`ùheæYPÔD<Î70Ñ7/×:1Ö=/Ô;+Ï9(Í:&Ï9(Ñ:)Ô8)Ø8*Ü5,Ü5,Ð/%Í3)Ì8,Ê>/Å@/Á@-¾=*¼9'Â9)¾0"éWJßK?Ã/#Ñ=1Î</Ç8(Ê;+É:)È9(Ç8'È7&É6&Ë5&Ì4&Ð7)×;.Ü>2Ü<0Ù7,Ú8-â>4ìC<õBEò9?ð2<ö4?ö2@ñ-;í-:í2=ì7>æ5;ä68å78ë99ð:9ñ78ï77ò;=î<<ê::æ87á85ß74Ü75Ü75Þ97á98ã99æ::é9;ì9<í9<ï8<ô7;ó6:ð8:í9:ç;9à;5×90Ï7,Ê8+È9)Ç9+Æ:)Ç:)Ç:(È;*Ç<)Á9#Ä='¾:#¶4¼9%ÉD3Ï?6Ê1,ÿ^eÿVgÿIbÿ<\ø1X÷0Yû6cõBiçYo¬FQo33N3,B?6>C<@78@-1L/3K2.A9&DJ(Zn=~š_ž¸w¨Å‚¬ÊŒŸ¾‚˜¶€”²~‚ nf„RXvBY{?]€>c‡AiDn”Im•Ll”Nk’Ol‘NiŽIfŠDc†Bc†Bf‰Ih‹KfŠLdˆJg‹MhŒNg‹Kf‹HeŠEf‹EjIk“Jq›QržSt U*0")/#).').(-/,130561782;<4>?7AD=HJGOPTSUaXYkZ\u\Z^]‰db”kj¤utº~·‡ß‹Œéð‰‰ë…„ ؀~Ҁς‚Ì…†É†‡È‡ˆË‰ˆÎ‹ˆÏŒ†Î†ÌŽ…ÈŠ€¼‰±†|¡‚x‘{s€tknlb`e]Re`Me^Kf^Kh]Ki\Ij^Hk_Gn^Ew_G[C’YF­ZLÇVPÞRSõQXÿX_ðUSãLEÙ>9Õ60Ù6/Ü90Û9,Ö9(Ó8&Ñ8&Ñ8(Ô8)×7)Ü6*ß4,Ý5,Î0'É5)È9+Æ=-ÄA/Á@-¿<*¾9(Ä8)Ë<.äREÜH<È4(Ì:-È:,Â4&Ê=,Ë<+Ê;*Ê;*Ë:)Ì9)Î8)Ï6(Ó7*Ö8,Ù7,×3)Õ1'Ø1(Þ7.ç<5øDGñ8>í/9ï/:ð0=î.;ë1<ë6?ä5:Ü36Ø22ß:8îEBøIFøDCó?>é:7ç98å97â96á85à85á98á98à87â88å99ç9:é9;ì9<í9<î7;ó6:ò59î68ê88ä;8Ü:5Ó9/Ë7+Æ8*Ã:*Â:*À;*À;*Á<)Á<+Á<)½9$Á?)»:%³5¹:'Á;/Ê:2Ø<=ÿ^gÿPdÿA[ù8Wö6[õ;`ô>dãIe«?Lƒ?>_:2G;/:>08>2F<:R>=N0.S8/VK5ciEx[°pÂ}¡Æš¹}š¹€š¶ƒ©xrŽ^YuETp=\{B_@b†@iCm“Hl”Kk“LiMiMgŒGe‰Cc†Bc†DgŠJiŒLhŒNg‹MiOiMiŽKgŒGgŒFfŽEl’Im•LpœQoRt U-1"-1#,/&,.)//-11/34/45-9;0<>1@B7EHAKMLQRWUUaVWi\Yt^]fdŒpn zx·…ƒÎ‹ßêŽïŽŒíŠ‰ç‡„ßÓ|Ë}ȀƅLjˆÆŠŠÊŒŠÉŒŠÉŒˆÅŒ„¿‹‚·‰€­†|¡€v{p€ujpndbi_Vc]M_aL_aKc^Jg\Jl[In\Ho]Gq]EwaIxX?‡S=£VDÇXOãUSøOTþMSâ><Þ<7Ý84Þ71á6/á6.Ý7+Ú7(Ô7&Ó8$Ó8&Õ8'Ø6)Ý5*à3,Ý5,Ë3(Ä6(Â9)Á<+Â?-Â?-Á<+À8(Ã5'ÜJ=ÚF:ÕA5Î</Ä6(Ä;+¾6&Æ:)Ç:)Ç:)É:*Ê8)Ë7)Ì6(Í3'Õ9-Õ7,Ö3*×3*Ú3+ß6/å:3é<8ð<=í49ë07ì18î3<í4<ë7@ê=CÝ7;áAAìNKøYUýZUúQLïB>å84â62à72à72à72á85â96ä;8ä;8á77ä88æ8:è8;ë8<ë8<ë8<ì8;ï58î47ì57ç77â:7Ù:4Ï8/Ç7,Â8+¿:+½;+»<+»<+»<)»<+»<)¸9&½@*³9$±6$¶;+µ0'Ã40ìPTÿ[iÿJ`õ:Uð7Vñ@]ïHfçHdÍNa‚89e?6R@2DA09=,57)>6+K9/E-#R=,g]Bˆ_’«t—»{–Áz–¿{”³xœ¸…š´…€šm\uKHb5Nh8[xB_}?cƒ@hŒDl’Gj’Ih’JgLfKd‰Dd‡Cc†DeˆFh‹KkŽNkOjŽNiOiOiMhJgHh’Hl”Ko™Ms¡Vs£Wv¤Y24&04&01)01+12-23.34.46+9;-;>-?A3DF9IJDMONRQWSS]XVd\Zoda~nl”zw¬„‚ÃŒ‰Ö‘㔑ê“뎋≅قÌ|Ã|¿€~½„‚Á†…Á‰ˆÂŠÃ‹ˆ¿‰…¸‡®…}¤…{€vŽyn~rgmmaak^Vi[Pc\J]`K]aJc^Jh[JmZKqZJtZIv[FsWAxR;ŠQ=ªYFÍ[PãTPðFIñ>AÛ2/Ü5/á51ã60ã5.á5+à6)Û8)Ö7$Ó8$Ñ8&Ô9'Ø6)Ü6*à3,Ú6-È6)½8'¼7&½:(¿>+Â?-Ã;+Ä8)Æ4'éUIÓ<1Ì8,ÑB4¾5%À=+À=+À8(Ä8'Å9(Ç:)È9)Ë7)Ì6(Í3'Ò6*Ô3)Õ2)Û4,ã:3é>7ì?9ì=:è45ì59ï6;î5;ê2:æ39ä7=â<@óUVübbÿmjÿidóVQäA<ß63Ý4/ß61Þ71Þ71ß82á85â96å97æ:8å78æ89è8;é9<ë8<ë8<ë8<ì7<î5:î68ê67å97ß<7Ö<4Ì9/Å9,¾9*º;*¶;)µ<)µ<+´=)³;*³<(³:'·@,­8&­8'³;-«+"Ã54ý`gÿTdúG\ð<Uë=XçG_áOdÒO_´SZvGAXH9KD2FE1BE0=?*:8#;3?3PG*nkHŠ“f•¬t‘´tŽ·s‘ºxž»…¡¸Š§}l‚[K_:AW0Lc7Wr?_{@dƒ@iŠCk‘Fi‘Hg‘GdHeŽJb‡Bc†Bd‡EgŠHjMlOm‘Qn’Rj‘Pj‘Nj’Lh’Jg‘Gi“Gm—KpœOv¥Wv¦Zx¨\78(68*66,56.56056067/68+;>-=@-@C.DG4IK>MNFQPNRRRVUSYX]a_lkius›€}²ˆ†ÇŒŠÓ•’ᔑâÜ‹‡Ó„Ä}º|µ|³~·„º‡„¹‰…·Š„²†¨z›€xs‡znzrfjm_^j[Ti[PjZKfZJb_Lb_Le^Li\Kn[Lr[Kw\K{ZG~UA†R=›RA¶VFÎRHÚG@â88å33Ý1-ß3/â5/ã5.á3,ß3)Ý5(Ü9(Ó8$Ð9$Ï:&Ñ:'Ô8)Ù7*Ý5,Ø7-Ä;+¹:)µ6%·8'½;+Â=.Ç;.Ç7,Ð90õ\TÖ=5É5+ÏA5¸3$·:(¼?+¿:)Ã:*Æ:+È:,Ê;-Ì:-Ï8-Ñ7-Ð3*Ò1)Ö1+Þ71å<7ê>:è;7æ74é75ï;<ð<?ê69ä15ä5:èBFíMOÿxwÿqnñ`[ÝJCÑ83Ñ2.Ü73ç@:à93à91à72à72â62ã73å76å76æ68ç79ê7;ë8<ë8>ë8>è7=ê7;î7;î79ê7:ä::ß=:Ö=7Ë;2Ã;/º8*µ:*³;*¯<)¯<*¬<(¬;)¬;)ª;(¬=*¦8'§9*ª8-¬/)Ë@CÿhrôM^óH[íDYåH[ÙO^ÉT]·TWœXUdM?OL9LG4JE1FD-?B'=D#>H#KV.\g<xT‹™f‘¤m©n²r—¹}Ÿ¶ˆ’§€u†dRcC?P0BS1Oa9Vl=b{Be‚BiŠCjEi’Fe‘FbHcŽGb‡Bf†CgŠHiŒJkŽNmPn’Ro“Sj‘Nk’Oj“Mi“Ki“Ij–InšKržOv¥Wv§Xw¨Y?=.=>.==1==3==5;<4;=2;=/?B/@D-CG.FJ3KL:NOAQQIRRHYWJZZN_^\gerqn‰{y¡ƒ€·‡…Čьӊϊ…ǃº~y¯zw¦yv¥{v¬|y®€|®ƒ}©ƒ}£x—|t‹zrvksrffm_\j\Sk[NlZLl[Kk[Ki]Mg^Mi]Mj]Mn]Ms^Mz]MZI“`O›VG§N@¸J=Å@7Ï6.Ø1+Þ1+á51á6/â5.â4-à2)Þ4'Ü6&Ú;(Ñ9$Í;$Ì;&Î;'Ñ:)Õ9*Ù7,Ó9-Á>,´;(°5#²5#»9)Ä<.É;/Ë7-Ù?7ø[TãIAÎ:0Ì@3¸6&¬3 µ<)¼9'¿7'À7'Ã7(Å7)É7*Î7,Ñ7-Ù<3Û:2Þ93å<7ê>:ê=9ç85ã41è96ë<9ì::è8:ì>@øPPÿbcÿppùheâTPÊ=6À1+É40Ö;7ß=:à;7â;5á:2â94á83ã73ä73å55æ66é69é69ê7;ë8<ë8>ê7=è7=é6:ï8<ì89è8:ã;:Ý>:Ó>7É<2À</¶8)²:)®;)ª;(©<(¨;'¥:&¥:(¥<) 9( ;) 9*¢6*µ>8ÛTXûepîK\ïI]éJ\ÛM[ÉQZ´VV ZRŠ`RPI7HM9NI5H@+;567>O%Lf6lŠTw”\„›e‰šd›f£k”­t˜°|ƒ•mn}\Q`C<J09F,AP1O_;Wj=czDe‚Bj‹Dk‘Fi’Fe‘FaFcŽGcˆCi‰FjKlMlOlOm‘Qn’Rm”Qm•Om–Pl–Lk—Jm™JrŸNs¢Q{¬]{¬]z«\DA0DB3DB6CC9CC;CC;BB6BC3DF0EH-GJ-JM2ON9RQ?TREUSD\ZC\\D\]Oaaaihxrq{z¦~µ†‚¿ˆƒÃˆ„Á„º{®ys¡to—om•plžrn¡vpžwršwr’to…skzrinmb`l_Wj\Qk[Lm\Lo\Mo\Kq[Mq[No\Nm]Nl_Om`Os`Oz_N†ZMŸ_S¤PE®B8º;2Æ6-Î1(Ö2)Ý5,â70á6/á4-à3,à4*Ý5(Ø7%Ô9%Ï:"Ê="É=$Ê>'Í<)Ò;*Õ9,Ï;-¿@-±<(¬5!®3!º8(Ä<.Ê:/Î5-Ø93ðNIñTMÙB9ÌB5¾?.¦1³<(¾<,Á9+Á7*Â6)Å7+É9.Ï;1Ô;3áD=ãA<ä?;ç>;é=;é;:è88ç85ç85æ95æ74é;:ôJJÿ\[ÿdcøc_Ì=9Á82½4.Ã81ÕA=ÞE@ß=;Ù42â;5â;3â94â94ä84å84ç77é77ê69ë7:ë6;ë8<ë8>è7=è7=é6:ë7:é69æ89à;9Û>9Ñ>6Æ<1¾<.³8)®;)ª;(¦;'¤;(£:'£:' 9&¡>+–7%œ=+š9)š2'ÃPKíkmî\fìP^éJ\ßHWÍKS¹RS¤[R’cQ€jUJM8DL7JB/H9$B7FH#Up=g“V~³o‚³qƒ¥h}’YƒYŽ–c‰—d|Œ_XfCGT89E-6B*:D,=J0JX7Wh>e|Fh‚Cl‹ElFi“Gc‘Fa‘GaGf‹FlŒImNn‘OlOkŽNkOm‘Qp—Tq™Sp™SpšPo›NqNt£Rw¦U|­^z­^y¬]IC3JD6IE9IE:IG;IG;HF9HG5IH3JJ2LL2NN4RP;TQ>XRDYTA]Y>[Z>\YH^[Tdahnk~xs“}x {§ƒ}«…­ƒ|¦}wunoi…kg‚ieˆjf‹mhˆmi‚mh|lfrkbgj`^g]Th\Nh[Kk\In]Kq_Kq_Kp]Lp]Np]Op]Ns]Ow]N~]N‡\L’XL¡UH¤F<«9/º7-Ê7/Ó6-Ú6-Þ6-ß6/ß4-ß4,ß4,ß7,Ý7)Ø6'Ñ6$Ï:$Ì<$Ê<&Ë='Î;)Ñ;*Ó:,Î<-¾A/¯<'¨3!¬3 ¶9'Á=.É;/Ì8.Ì2*àA;ø[TàI@ÐD7ÊF7«2¹>,ÊF7ÌB5Ê@3Ë?2Í?3ÔA7ÜE<ãF?â@;â=9ã:7â64ã54ä65å97å<9ä?9à=6Ü:5ß@:êMHêQLÓ@9¸)#¸-&¾5-É>7Ñ@;Ö>9Ú;8ã;;ç==â96â96â96ä86å95ç:6é99ê::ê88ê88ë8;ë8;é9<è8;ç7:ç7:é6:æ68â88Þ:8Ö=8Ì=5Â<1¹;-®9(ª;*¦;)¢;( ;'ž;&Ÿ:(›:'˜?-Œ5"™=.˜8*—/&Í\X÷y|ßX_æXdÚQ[ÊKR¹LO©VPž`UgU€nVPW8?J*<;C=UQ+lvDƒ¢f”Á~‡¼v†¸s|žan‚Mu~Q‚‡^u}V[b@;D)4<%5=(=D2<E29C+CP2Ue>g{HiƒFl‹Gm‘Gj“Gf’GbGcŽGhJlMo’Pn“PlMiŽKjJj’Ls›TsUsSržQržOs¢Rw¦Uz«Zv¦Zu¥[s£YRK;RK;RJ=RJ=RJ=RJ=RJ=RK;UN<VO=WP>XQ?YR@[TD\UE\UEb[HaZHaYLbYRe][kaiqftuj{zn„|pˆs‹s‰|p„uj{mbre]jc`k`_g_\c_Z^^ZY^YUaZRbZOe[Og[Ki\Kk\Ik\Gm]Fm]Fj^HicMqfTqZJuOB‹WJœ\P£YL¬ZL¥N=¦E4§<,±7(Â8-Ñ80Ü41Ý1-ß6/Þ7.Þ7.Þ7.Þ7.Û7+Ø6)×7)Õ8)Ô8)Ò9)Ò9)Ò9+Ò9+Ô8+Í;,½;+¶>-®9(©1 «2!·9*À</Ã9.È5+Î5-Ô:0ÛC8ÝK>ÔH9Â=,·2#ÝPFØJ@ÔF<ÔD;ÚG?ÞG@àC>à<:à74æ87ì::ì::ç77â64à93Ü=7ÙF>ÏB9Ä:/¼4(·1&¹5)¿;/Ã?3Ã:0É<3Ò?7Ú?:â=;ç;9ì89í9:ç7:å8:å8:å99å97å97å95å95à40á51ä65å76æ89ç9:ç9:ç9;ë;>æ9;ß99Ü=:ÖA=ÍB;ÁA6·?1©:)£<+ =*›<(™:&–:%—8&‘8&A0‹<-‡/#‘/&¼LJämoçloÍVZ½LNµNOªQM¢UO›XO—]R•aTŠjSWZ/:M7FTa)~ŽP›°oŸ¼yœ½x’µs~ah€L\mCYdBT]BHP9?D0:=,@C2<@1:>0<C3:C0AN2Rd>]sBgƒHpKo“Kl’Gj’Ii“KgJlPm‘So“Sl“Pm’Mk“Jm–Jm˜IqœLqžMrŸNr¡Pt£Rv§UyªYzª^y¦cm™ZbŽOWN?WN?WN?WN?WN?WN?WN?WN?XO@YPAYPA[RC\SD]TE^UF_VGd[JcZIcYMcYOf[Uj_]nbdpdhreltgpvirvirsfmm`gg[_bXY^[VZZRYVOWTKXTIXTH\VH^WGcZKcZIf[Ig\Hi]Gj^Fk_Gh`IcbMngTv\MSFšVM«VO°RJ·QE¯H9¬C0¬=,±9)¾8,Ë80Õ62Ù40Ý6.Ü8.Ü8.Ü8.Û7-Ú8-Ù7,×7+×7+Õ7+Õ7+Õ7+Ô8+Ô8+Ô8+Î:,¾<.¶>.®9(¦1 §2 ²:)¹>.¾<.Æ:-Ç4*Ë4)Ò;0ÜE:áOBßQCÝOCÛF?Ø@;Ó<5Ò;4Ö=7Ú=8Ü86Ý33ç77ë78î79ë78ç77å97â=9ÛB:ÊA7¿?4¸:,±6'¯5&²8)¸=-¿@1ÅA4Í@6×@7ß=8ã:7é77ï56ñ7:é6:ç6<ç7:æ89æ87å95å95ã:5â92ã:3ã:5ä;6ä;8ä;8å99å99ä:;ã;;ß<=Ù?=ÐA;Ä?6·=2¬;-¥;+ =*œ=+—<)–;(’:&“8%Œ:%€9'€8)‰5*<5¿QP×eeÑ^a·MM¬NL¤TMYP˜\Q—^S—^S˜_VŒfQ`_/Sg*^r3zO™¯n¥¾|™²pˆ bj‚HauBTe;JX7FP7?H59?158-:</AB4=?4:=2=A3:C0@M3Rd>^tEgƒHqMp”Ln’Hk”Hk“Lh‘Km‘Qn’Tm”Sm”Qk“Lk”Hl—Hm˜HpJpJp Ls¢Qu¦Tx©Xx©Xx¨^m—Xb‹QY‚H]TE]TE]TE]TE]TE]TE]TE]TE[RC\SD]TE^UF_VG`WHaXIaXGe]Je]Hd[Jd[Le[Qf[Uh]Yh][i]]j^^k__k__i^\f[YbWS_VQZVMWTKUQHRNCQMBSOCWQCXRB^WG^WEaYFc[Fg\Hi^Hk`JhbLbaMngUy_PˆXN¢[U±VQ²IE¸E@¹@7¸>1·;/¸8+¼8+Ã9,É;/Ñ:/Ù8.Û7-Û7-Û9.Ú8-Ù7,Ù7,×7+×7+Õ7+Õ7+Ô8+Ô8+Ô8+Ò9+Í;,À>0¶>.­:(£2 £3ª:&³>,¹>.Ä?0Ä8+Å2(È4*Ð<0ØF9ÜM?âNDÙ:6Ø43Ô20Ö42Û97á=<æ<<é;<í9<î5:ë27é26è58å99á<:Ù@:¾8-µ:+±6'®4%­5%°8(µ<+»=.ÈD5ÏC6ÖB8Ü=7â94è64í55ï79ê69é69é69ç77ç77æ95å95å:3ã:3ä;4ä;6ã<6ã;8â:9á99Þ88Ý9:Ü<<Ú@>ÓB=È?9¹:1­7+¥7(¡;,<+™<+”;)“:(9&7%Š9&z6#y6%ˆ9, F=¹SOÀWT¸PO«IF¢MHœSL™YP—^S—aW—aW˜_V‹ePsrFzV“¦n¤¹€«À‡ž³{|[[o<?R$AS+AP/?L2:C06<.69058/9;.@A3=?49<1=A39B/@M3Qc=`vGi…Js’Or–Np”Jm–Jm•Nk”Np”Tq•Uo–Sn–Pl”Kl•Il—Hn™IpLpLpŸNu¤Sx©Xyª[u¦Wq X_‰JVEOx>aXIaXIaXIaXIaXIaXIaXIaXI_VG`WH`WHaXIbYJcZKd[Ld[Je]Hf^Gf^Ig_Lg^Of\Pf\Rf\Sh]Wh]Wh]Wh^Ug]Te[QdZPc[N]YMZVJVRFRNBPL@PM>TN@UO?WQAYTA[VC]XDaZGd]Jf_LfaMdcQleUv\OŠ[Q©b\¸ZX¶FD¹<:Ã<8Æ;6Ä:0Â8-½8)¼:*¾?.Ç?/Ó9-Ù7,Ú8-Ù9-Ú8-Ø8,Ø8,Õ7+Õ7+Ô8+Ô8+Ô8+Ô8+Ô8+Ò9+Í;,Á?1¶>.¬9'¢3 3¢8"¬=)µ@.¼?-¿:+Ã7*Å5*Ë7+Î:.Î</Ó:2Þ65à24Û12Ý34à88å;<ê=?ì<>î7<ì38é06æ25å58á77Ú65Î61·5(¯7'®6&¬7&¬7&®9(²:)µ:*ÃA1ÊB4ÔA7Ü?8â;5æ95ë76î87í68ë78ë78ê86ê86è94ç:4æ;4â92á:2ß:4à;7Þ:8Ü:8Û97Ù99Ö<:Õ@<ÒC=ÊA;»;2¯6+¤6'ž7(œ;*˜;)”;)’;(:&8$Œ7#‡9%€=*v5#5'™E:ªPH¬MG©LG¦QLPJ˜UL”ZO”^R•aV•aV—aWgT‰…_™©x­½Ž¦¸ˆ¡ts†YN`8/A->3B%:F.=F3;A3:=2:=4<=599-?@2<>39<1<@29B/?L2Pb<awHj†Kt“Ps—Or–Lo˜Lo—Pm—Op—Ts˜Up˜Ro—Pm–Jm–Hn™Jp›KqžMrŸNt£Sy¨X{¬]w§[mSe’M[…FS|BNw=cZKcZKcZKcZKcZKcZKcZKcZKcZKcZKd[Ld[Le\Mf]Nf]Nf]Lf^Gg_Hh`IiaLiaNi`Oh_Pg^Oj`Ti`Qi`Qh_Nh_Nh`Mh`MhaNd^N`ZL[UGVPBPM>NK:NK:NK:PM<RO>TQ@VS@XWC[ZF]\H^]Kb`Qf^QmWJ†[R¬ic¾c`ÁMMÈBCÐ;=Ô89Ó84Ì70Á9+º=)µC+¼B+Î;+×7)Ø8*×:+Ù9+Ö9*Ö9*Ô8)Ô8)Ô8)Ô8)Ò9)Ò9)Ò9)Ò9)Í;,Á?1¶>0«:(¡6"š4›7 £=&¯B-³;*º;,Â:,Ç9-Ë8.Î:0Ð<0Ù:4é9<ì4<æ39ã28â38á48â38â25é6<é49ç4:ç7:ã9<Û76Ð21À0(´6(­:(­:(«:(«:(«:(¬9&¯7&¸:+Á;/Î>3Ø?7à=8ä;8è96ì87î66î66î66í74ê84è:3ç:3ä<3á:2ß;2ß<5Ü=7Û=:Ù><×=;Ô>=Ï@<ËB<ÅB:¹=5­7-£5(ž7(š:*–;)“<)‘;*:(Š9&‰8%ˆ7$ƒ8%ƒ@-u4"{3%“G:¤QI¡NFžNG¡WN˜UL’XLZN\N]R”`U—aWhW‰f˜¥z©€Žj]kHDS42@&$2-:&0;*5=.9?3<?4=?4:;3::099->?1;=28;0;?18A.>K1Pb<bxIk‡Lu”Qt˜Ps—MqšNq™Ro™QršSršSršQp™Mm—Km˜Ip›LsžOt Qv¢Sx§Y{©^z¨_qŸVd’JY†C]†JW~GRyBe\Me\Me\Me\Me\Me\Me\Me\Me\Mf]Nf]Nf]Ng^Og^Oh_Ph_Ng_Jh`IiaLjbMjbOjbOjaPjaPjaPiaNh`Mh`Kh`Kh`IiaJjbKf_Mb]J^XHXRBSM=MJ9KH7IH6KJ8LK9LM;NO=PQ?QTASVESVE[YL^VIcQEzXN¡ha¶eaÄVUÖQRÙ@Cß:>Ü87Ô70Ç;.¼?+±C*µA(Ê;*Ô7(Õ8)Õ9*Ö9*Õ9*Õ9*Ô8)Ô8)Ò9)Ò9)Ò9)Ò9)Ò9)Ò9)Í;,Á?1µ=/«<)¢9$™6•5›;"§A*²B.¹@/¿;,Ã7*Å2(Ë4+Ò;0ß=8ê5:î3<ë6=é8>ç:>ä;>ã:=â9<ß58á7:â9>á=>Û=>Ñ96Ã2/¶0'¯9+«>*«>*©>*ª=)©<(©:'«8%¯6%¹7)Å;0Ð=3Ù<5ß<7ä;8è;7î87ï75ï75î85ë:4é;4ç<4ä=4â>5à?7ÞA:ÚA;ÙA>ÕA?Ñ@=ÍB?Ã?:»@8³=3ª8-¡5(›5'˜8(•<*‘<(<)Š<(ˆ:&†9'„7%ƒ6$6%}:)t3!~9*—OA£YNœRG•OE˜VJ•YN[MŽZMŒ[MŽ\Q“_T™`W‘gW~xXyƒ^r|ZU`B;E,/;%0;*0<.3=24<16<2<?6@A9?A6<<077+89+>?1:<17:/:>07@-=J0Oa;bxIk‡Lu”Qu™Qt˜NqšNršSpšRršQsœPr›Op™Kn™Jp›LsžOv¡Ry¥X{§Zz¨]x¦]qŸWg”O]ŠEX‚B`‡NY€ISzCg^Og^Og^Og^Og^Og^Og^Og^Og^Og^Og^Oh_Ph_Ph_Ph_Pi`OjaPjbOjbOjbOi`Oi`OiaNiaNiaNh`Kh`Kh`Ih`IhaGhaGhaGf_Le^Kb[I\WDWR?PM:LI8IH6IH6GH6GJ9GK:HL;IM<HO?JN?PQCXRF[OCiRDƒYM–VL°SLÔZYÛIJâ?Bá99Ú72Ï;1Â?-´B*³<$É:)Ó7(Ô8)Ó:*Õ9*Ó:*Ó:*Ó:*Ò9)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Í;,Á=0µ=/¬=,£<)˜8 4•9 ¡A)­C-¶A/¿=/À6+Â/%Ç0'Ð6.Þ:8è59î6>ì;Aê@CæAEàBCÜ@AÙ??Í12Ð66Ó:<Ñ=;É;9¾71µ4.­4)ª<-¥>+¥>+¥@,¥>+¤>(¦;'©:'ª7%²7'¼8+Å8.Ì70Ô94Ü=9æ>;é:7ì95ì95ë:4é;4è;4å=4â>4àB7ÝC9ÚC<ÕB;ÏA=Ê?<Ç=;¿>9±<3©:/¢8+œ6(˜7'”8)‘:):(‹=)‰<*‡<)ƒ:'‚9(€7&6%}6$x3#x5%…B2˜UEWK”PCPD•ZL“YMZN\Q\Q’[T•\U˜[VŽbUkbEV`=JS4=G,6?*2=,4>35?66=68?8=B;CF=EG<CD6@>/;9*78*=>0:<17:/:>06?,=J0N`:awHk‡Lu”Qu™Qt˜Nr›OršSpšPq›OrNqœMp›LošKrNu¡Ty¥X«`~©az¥]qœUf‘L_‰G]‡E^ˆIb‰PY€ISzCh_Ph_Ph_Ph_Ph_Ph_Ph_Ph_Pg^Oh_Ph_Ph_Ph_Ph_Pi`Qi`QmdUlcTjaRi`Qh_Pg^Og^Mh`MiaNiaLiaLiaLh`Ih`IhaGh`IgaKf_Le^Kb[H\WDUR?PM<ML:EF4DG4DH7DH7BI9BK:BK:CJ:IK>SQDSPAXL<eK:tE5•H>ÂYSÙROàDEà::Ü75Õ;3Ê>/º=)µ8"É:)Ï8'Ð9(Ò;*Ò;*Ò;*Ò;*Ò;*Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Í;,Á;0¶:.­<,§>+™9#3“7Ÿ?'£9#°;)À>0Æ<1Ì8.Ð7/Ù<5ã?=ì=Bî?DéCEâDCØ@?Ê;7À50»1.¹/,¼51¾:6»<6³:2ª8.¤8,¡:+¡=-Ÿ>+ ?,¡@-¡@-¡A+£>*¦=*©;*­:(²7(¹5)¿5+É90Ô?9àC>ä=7è;5è;5ç<4å<5ä=4á>5Þ@5ÜD9ØD:ÒC;ÊA9Ä?:¼;6¸85°93¢7-™8(•5'“6'‘:)<*‹:)…8&ˆ=*…<+ƒ<*€<)~:'|8%{6&{6&y1#€8*ŒG8–SC’PB‹L=RE™_S‘WL’YN”[R–]T–]V—\V–YTŒ^QaX;EM(6@8A&>G2<E43=2-7.1817>6BE<GJ?HI;BC1?>*;:&78(=>09;069.:>06?,<I/N`:awHj†Ku”Qt˜Pt˜Nr›OršSpšPqœMqœLqœLp›Kp›LsžOw£V{§\‚­e€«dx£\j•P]‡EYƒA^ˆHePcŠQZJSzCi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi_Sj`Wj`Wj`Wj`Wj`Vj`Vj`TjaRjaRjaPjaPjbOjbOjbOjbMjbMg_Jg_Jf^Ie_Ib]IZXCSP=ML:HI7EH7AE6@D5?E7?G8?G8>F7GK=IK=AE4KJ6\Q;aE/ƒJ9Àj]Üg`ãUSäFEåA@àA=Õ>5É=0Æ=-Æ4%Ë5&Ì6'Í7(Í7(Î8)Ñ;,Ó=.Ò<-Ò<-Ò<-Ò<-Ñ;,Ñ;,Ñ;,Î<-»2(¶7.±;/¨:)š7"”5•7œ9"®A-³;+º6)Á4*Í6/×<7âC?êHEèDEèEHÝCCÉ:6»61´80®8.©4+«9/©9.¤8. 8-›9,–:+“<+’<+–=+˜=*™>+š?,›@-A, A-£@-¢;*¥:(«7(°6)¶6+¾8-Ä;3Ì<4Ú=6à=6â?8âA7âA9ÞB6Ú@6×@5ØH=ÒE;ÇA8»;2²5/ª3-¦1*Ÿ2+™9-’;*‘9+:*‹:)ˆ;)‡;+…<+€9'}8(|9(|9(|9({8'y6&x3$w- ‹A4—OC“MAŽL@‘QE“UJŽRG˜\R˜\R‘UMTL—ZU•XS”WT“gZ]T5IQ*AK(BK,>H/7@+2=-4?14<1HPCZ^PW[JMO:DF.AA'==%:;)>?1;=2:=2;?14=*;H.Pb<cyJlˆMu”Qs—Or–Lp™MršSq›QpLqžKrŸNrŸNsŸPv¢U{§\ªb‚­fx£^j“O`‰G^‡Ea‰JfŽPhTd‰S[€LTyEi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi_Sj_Yj_[j_[j_Yj_Yj`Wj`Vj`Tj`TjaRjaRjaRjaRjaRjaPjaPh`Mh`Kg_Jg_Jd]J^YEUR?ON:IJ:EH7BD6@D5?E7>F7>F7=E6@F8>E5>F1HL5MI0U?'Q:¼sbËcXà_ZëUTçGGâ@>àA=Ø?9Î:0Í9+Î=,Ï=.Ï>-Ï;-Î;+Í9+Í:*Î:,Ð:+Ð:,Ð:+Ð:,Ð:+Ð:,Í;.É?5ÅB:¼B7®=/Ÿ6#–1–1›2¨5#´6(Ã;/ÑA8ÞE?æIDéJFêKHÞCAÛEDÐB>¼<3¯9/©=0¥?1Ÿ=0Ÿ?1œ>2—>0”>/=/Š>.‡@.ˆ?,Ž=*‘;*’<+“=,”?+•>+—>,™>,Ÿ@.¡=-¤:,¨8,¬8+±8-¶:0¼9/Ê<2Ð<2Ó?5ÕA7×C9ÖC9ÔD9ÑE8ÊB6ÃA4¹=3°:0©6/¤5.Ÿ4,™7,’:.Œ=,Š;,ˆ;+†:*„;*ƒ<*<,~;*|;){9)y:)x9(w8'u6'w4$€4'D7˜NC‘K?ŒJ>QD’TIRG“SJ˜XO˜UO—VPœ]X”WRŽSOŠcT]W5Xc9_jBZfBIT66C)4@*<H4OXGYbQ_fTW\FJN7BE*??#<<"9:(=>0:<19<1<@25>+;H.Pb<dzKlˆMu”Qt˜Pr–LqšNršSq›Qs OrŸLpLqžMt Qx¤W|§_ªc{¦aošUcŒJ]†Da‰JeNeNc‹Od‰S[€LTyEi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi_Uj_[j^^j^^j_]j_Yj`Wj`Vj`Tj`Tj`Tj`Tj`Tj`Tj`Tj`Vj`TlaOk`LiaNiaNf_La\HYVCSR>MK<HI9DF8AE6AE6?F6>D6<D5=F57@-@H1IK3F?%W?'‡ZC·s`¶VJÙbZðebìTSæFHëGHæCDØ;6Ë7+É:*É:,É:*Ë9,Ê8)È6)È6'Ê8+Ë7)Ë7+Ë7)Ë7+Ì8*Ì8,Ë8.Â3-¾5/¶6-­3(¡0"ž/ 1 §3$¼A2ÇC7ÖG?áLFçLGéJFåFBßD@×CAÏDAÁ@:±;1¤</¡A1œE4˜E3“D3‘D4B2ŠA0…@0‚A/~A.@.†:*‹9+‹:)Š;*‹<+<+Ž=*<*–?.–=-›;+9* 8+¥9-©;.®9/¸:.¾90Á;0Ä>3Å?3ÅA4ÃA3ÁA4¶;,²:,ª8-£7+ž6+›6,˜7.”:/;/ˆ<,‡;-„;,‚:+€;+€;+<,};+z;*z;,w9*v8)u7(t6)v4&ˆ;1”F<–NBŽJ=ˆH<OB‘SH’RI’OI™TO™SQšVSš]Z“YU[Tl[}X~‰^€‹alxRLX46D#=J.LZ@eqYeoW]eMPU>EI0?C(=@#:<$89';<.8:/9<1=A36?,<I/Pb<dzKm‰Nv•Rt˜Ps—MqšNršSpšPu¢Qp LnLpŸOu¤Vy§\}¨`|§`p™UfM\„E\„EeŒMiQfN_…HcˆRZLSxEi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`QjaRjaRjaRjaRjaRjaRjaRj`Vk`\k__k`^k`\k`ZkaXkaWkaUkaUkaUkaUkaUkaWkaWkaXkaWnbRmbPjbOjbOhaNe^K_ZGYVERO>MK<GH:DF8CE7BD6@D5<C3<H49B-FJ3LF0O:%qL9šcOª^N¡A5ÆSLçc_ð^^íSUëJOéDHáAAÌ91Ç9-Å7+Å7+È8-Ê:/Ë;0Í:0Ñ>4Ñ>4Ò>4Ò>4Ó?5Ó?5Ó?5Ó>7Ó?;ÑB>ËD>ÆF=ÂF<ÃI>ÇM@ÎPDÙSHÝPGâMGäIEäGBâC?àA=ÛB=ÕFBÉD?º?7«=0Ÿ>.šC0•G3”I6F4ŒE3ˆC3…B1€A0}@.zA.|?-‚:,†8,…9+†:,†:,‡;-‡;+ˆ;+‰:+‹:)Ž8)8*•9,™;/=/¢<0ª:/­8.¯9/°:.°:.°:,¯9+®8*¨7)¥7(ž6)›6*•7+’8-‘9/Ž<0ˆ<.…<-ƒ;,9*:*~9*}:*};+|:,z;,y;,w9*s8*q6(r7)u5)ŒD8’H=‘K?ŠH:‡I<‹OD“TK—TL–QL›TP˜QO”SO–\X_Xh^—~j””p…’fu‚WYh?CR+?O*P`<crQetU\iKNX=CL1?E+>B)=A(;='78(:;-79.9<1=A37@-<I/Oa;bxIlˆMv•Ru™Qt˜Nr›OršSo›Pq OožMožMs¢Rz¨]|ªaz¥^u [cŒJ^‡E[ƒD_‡HgŽOj‘PfL`‡Hb‡QY~KRwDi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`QjaRjaRjaRjaRjaRjaRjaRj`Tk`Zk`\k`ZkaXkaWkaUkbSkbSkbSkbSkbSkaUkaWkaWkaXkaWocUnbRkbQkbQkbQhaOd]M`ZJXRBRO>NK<IG8GE6DE5BC3>B1=I1?G/LG1S>+g=-•ZL­_Sœ>4ž3+¶?9ØXUóigödeëRUæJNèNPÙIAÓF<Í@6Ë>4Î@6ÒD:ÕG=×G>ÚJAÚJAÝJBÝJBÞKCÞKCàKDàKEëSRèTTãSRÜROØSLØSLÛULàUNàLHáIFãEBâC@äB@âC@äEBàFDÙJFÊE@¹>7¬=2¡?2˜B1’E3G4ŒE3ˆC3‡B3ƒ@0?1~?0z?/|>/€:.ƒ9.ƒ9.ƒ9.ƒ;-ƒ;-ƒ;-ƒ;-9*‚9*…9+‡:*‰:+;-<.“;/›;/ž9-Ÿ9- :,¡9,¢8+¢8*¢8*Ÿ8)œ8)˜8(”8)9*Œ:,‰:-‡;-„:-‚:,9+€8*}8)}7+|8+{9+z8,y9-x:-v8+q5*o5)q7+t9+ŒH;I<‰I=„I;…K?ŒRF“WM˜XO˜QMœUQ˜RP“VQ’`YˆbWƒg[†zdnrQZi@JY0AR(IZ0Wi?dvNj|VXiEL[:?L.:D)<D,>C-<A-:=,89+:;-68-8;0>B47@-;H.L^8_uFi…Jt“Pt˜Pt˜Nr›Os›TpœQnMmžLp¡Pw¨Y|ªaz¨`rXi“QZƒA\„EaˆIeŒMgŽMgŽKhJfŠLc†PY{IRtBi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`QkbSkbSkbSkbSkbSkbSkbSkaUlbYlbYlbYlbVlbVlcRlcRldQldQldQlcRlcTlbVlbXlbXlbXocUnbRkbQlcRlcRkbQg`Pd]M^WGYSCSM?MJ;KH9GE6EB3?B/;H.?H-OC-a=-ƒE:«XR´NJž,+²:9¹=;ÓSRòpnþvvñehëX^ð^_ãUQÚPFÔG@ÐC:ÑD=ÔG>ÖGAÖG?ÙHCÚJBÜHDÝJCÞJFÞKDàKGàKGâHHáGIÜHHÙGGÖHD×HDØGBÛFBàBAäABæBAèBBçCBäB@ßA>ÛA?ÛJGÊC?¹<6®>3¢@3˜A0A0C3ŠA2ˆ@1‡?1…=1‚<0€<1=1=1;1;1ƒ:3;1;1€</€<1=/€</€=-<-€;,‚:,9*‚8+ƒ7)Œ:.8.‘9-”:/—;.š=.ž</Ÿ>.™9)–9(“:*:+Š;,‡;+„;,‚:+‚:,9+7)~6({5){5){5)z6)x6*x8,w9,s8*p4)o5)r:-v<0‹M@‰K<„J<‚M=…QC‹VH’XM—WN“NI™TO—VR•\Ue\{^PfVF`^GEO->N)?O(J\2_rEk~QexKXj@M_7@Q-6E&7D*=F1=D4:>07;-8:,:;-68-8;0>B47@-9F,I[5[qBeFr‘Ns—Os—Mr›Os›TpœQmœLo Os¤Ux¨\z¨`s [i“Q`ŠHYB^†GeŒMgŽMfJeGgŒGhŒLa„NXzHQsAi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`QkbSkbSkbSkbSkbSkbSkbSkbSlbXlbVlbVlcRlcRldOldOldMldMldMldOldQlcRlcTlbVlbVocUmaSkbSlcTmdUlcTi`Qf_Ob[K^WGXQARL<OI9JG6IC3AC.:G+@F*U@+xG9£PL´HH¶8<º39ÈAEÄ?@ÊJIßb`ñqpðnpçbeâZ\ÛQNÕLDÏD?ÍB;ÏD?ÐE>ÐB>Í@9ÒC?ÒC=ÔC@ÕD?×CAØD@ÙECÚDCÝADÝADÞDFÝGHßIHàJIãIIåGHçACêADìBEìBEçAAâ@>Û=:Õ=:ÚFFÉ=<¹83°;2¦@4˜?1‘>0@1Š</Š<0‰;1ˆ:0‡81†93…:4„;4;3€<3:4€<3<3}=1}=3|<0|<0|=.|=.{<-|:,{9)z8*{7*‚:.ƒ9.‡9-‰9.9.‘;.•<.–=-’9)‘:):*Š;*‡;+ƒ<*€;+~;*€8*€8,~6*}5)|4(z4(z4*y5*u2)v6,v8-r6+o3)o5*s:/x@3ŠPB†N?N=‚Q@…VF‰XIŽUJ‘RI’OI—TN“TO‘\VŠfZn[JPK7EK1AN0KZ9WgC`rJgyOdzLVl>G]/AV-7H$1@!6B*=F5<D98=67:39;.;<.68-9<1?C57@-7D*FX2Vl=a}BoŽKq•Ms—Mr›OtœUqRožPq¢Qu¦Wv¦Zs¡Yj—RbŒJ[…E^†H`ˆIcŠKeŒKfJfŽHf‹Fe‰I`ƒMWyGPr@i`Qi`Qi`Qi`Qi`Qi`Qi`Qi`QkbSkbSkbSkbSkbSkbSkbSkbSlbVlcTlcTlcRldQldOldOldMldMldOldOldQlcRlcTlcTlcTnbTmaSmaSmaSmdUlcTjaRg`Pd]M`YIZSCUN>PK8MH5ID1DC.@F*DD([B,ˆTG¯\X«>A¬/3ÎINÆ?EÀ;>»;<ÄFGØZ[ãefÛY[ÌGHÑJGÐEBÍB?ÐB>ÔFBÔFBÐB>É>7ÏD=ÏD=ÒD@ÔEAÖEBÙECÚDEÝDFÞ?Cß@DÞBEßEEáGGàFFàBCá>?èBDé@Cè>Aç=>ä>>ãA?áC@ßECÖBBÅ98¶50°;4¦?6š>3=/?2ˆ</‡:0‡:0‡81‡83‡83ˆ94ˆ;5‚92€:2€:2;2~<0~<0|<0|<0x8,y9-z:.z:.{<-{<-z;,z;,};/9/€7.7,„6*…5*†7*†7(Š8*ˆ9*ˆ;+…<-„<-€=,~<,};+}9,}7-|6,y5*z4*x4)x4)x5,r2(u5+v8-r6+n4)n5*t;0xB6ŠUG„PB€O@„SDˆWIŒVJŒRGNG•TN”UN‹RK„XMdSeZDGK2=J,IX9ZkIgxTcxQYnESh=Nc8J_4:L&0?,95>)=C5<B8:<79<5;=2;=079.9<1?C58?-8B)EU1Uh;azCnŠMr“Nr–NršQsSqRr Uu£Xv¤[t¢ZošUfN^ˆH[ƒDdŒNa‰K`‡HcŠIfJgŽKeŠEa…E`ƒMWyGPr@i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbQkbQkbQkbQlcRlcRlcRlcRlcTlcTlcTnbTk]Pp`QtdWrdWnbVj`Th`ShbTgaSgaQc]M[VCVQ=SN8NH2GA)KG,I?$bI3‘gW¶xm»le¸YW¹OO¶BE½BEÂDGÈFHÍHKÐJKÒLMÓKMÏEEÐDEÓEDÖFEÕFBÒC=ÎC<ÏF<ÈD8ÉE9ÊE<ÌE?ÒD@×CCÚADÛ?CáBFâBDáCDàDEàDEáFDãEDäDDãCCäB@ä@?ã?>ã?>â@=â@=ÞC?ÓB?Å>:¶93ª70Ÿ:0—=2Ž>3†>2ƒ?2?3=2;3„93†93ˆ81ˆ92…;0„<.„<.ƒ;-;/€:.€:.€:.~:-~:-~:-~:-};/};/};/};/}90}90~80~8.€7.€7.€7.~8,€8,~8,}9,|8-{9-z8,x8,x8,x8.x8.w7-v8-v6,t6+s5*q5+m1'r6,n4)m3(o6+m4)q8-I=…SH…SJ†RGˆRH‹PHQJ”QK•RL“TMTK‰[N‚cQo_HYU:MV7O_;j~YbxQYoHUjCRg@Mb;IY5CR17D&4>#2:#6;'<>0@B5@@6<>358-39-4:.7:/9=/;?.=B,<E(S_;arFn†Rs‘Ur•QršSsSrUužZ~§e~§ep˜YbŠK^†G^†H^„G`†IbˆKdŠMfNeŒMcŠK`‡H^„G_‚LTvDKm;i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTnbTrbSqaRrbUqcVrfZogZmeXjdVgcWkhYoiYlgThcOc^H[U=RL4PJ0H>%Q?)kP=XG„NBˆE=“D?±WV¸TT»QQÀPOÀNMÁMMÂLJÃKJÐTTÈHGÂ=>Ä=:ÐB@ÓEAÏB;Ç>4ÊD9ÉE9ËF=ÍG>ÔFBØDDÜAEÝAEáBFáCDáCDâDEâDCáFDáFDáFDàEAßD@àB?ßA>àA=àA=àA=ÞC?ÔE?ÈC<º>6¬:0 90”:/Š<0‚<0€A2~@3~>4<3ƒ:3†91ˆ81‰90‡;.…<-„;,„;,ƒ;-‚:,‚:,‚:,9-9-9-9-~:/~:/~:/~:/}90}90}90}90}90}90|90|90|90z:0z:0y9/y9/y9/w9.w9.w8/w8/t8.s7-r6,r6,p6+p6+k1&q7,m4)l3(o6+l3(p7,~H>„RI…SLˆQJ‹PJQL”PM•QN”SOŠOG…SH€[K{ePsiPhkLfqQgxT^tMXnGPf?La:K_:K\:GV7CP4<F-8@)6;'7:)<=/?@2>>2;=04:03;05;16<0:</<?.>A,>D*Q[9^mDkRpŒRp“Sq™RsSsžVxŸ^|¢exžak‘T`†I]ƒF]ƒF\‚E`†Ia‡Jc‰Le‹NdŠMbˆK`†I^„I]LRtBIk9i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTnbTqdTo_Pm]Pm_RqeYog\ldYhbVfbWpl`{xi~{jyizubpiVe`JTT<FF.C>(MB.S@/U8(]7*l=3n70u91~;5‡@:’IB›PJ¥XP­ZR»^YºSN·GE¼B?ÈDBÑFCÓD@Ï@:ÐA;ÐC<ÒE>ÔG@ÖGCÚFFÛEFÞDFßCDßCDßCDßCDàDEßEEßECßECÞDBÞDBÜD?ÛC>ÜC=ÜC=ÜC=ÛC>ÖE@ÎE?ÃB<³>5¢:1”8-ˆ9,ƒ;-‚@2@1~>2=1ƒ:1†91‡81ˆ:0‡;.„;,„;,„;,‚:,‚:,€:.€:.9-9-~:/~:/~:/~:/~:/~:/}90}90}90}90|90{8/{8/{8/{;1{;1z:0y;0x:/x:/x:/x:/t8.t8.s7-s7-r6,q5+o5*o5*j1&o6+m4)k2'l6*i3'm7+}G=‡PI‡PI‹PJŽQL‘RM’SN”UP‘VPŒWO‡[P~^OtbNoiQorUlwYfwUQeBK_:EY6DU3EV6GV9GT8ER8?I0<D-9>*7;*:<.<>0;=/9;.6<25=26<26<0:</<>0=@-=C)MW5Zi@f|MlˆNn‘Qq™RuŸUtŸWz¡`w`n”Wc‰L\‚E\‚E\‚EZ€C_…Ha‡JbˆKdŠMc‰La‡J_…H]ƒH[}JPr@Gi7i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTnbTrdWoaTm_Rk_SkaWlcZle[jf]jf]xtiˆ„x‘•’Œ~‰‚r}zg`cNOT>DG2FE1HC0F=,L<,VC4P9+R6*V4*Y5)\6+a9/e=1m=1ŠKBSJ®UO¶NK¼FDÆABÒDCØFFÔ@>ÕA?ÖB>ÖE@ÙECÚFDÛEDÝEDÞDDßCDßCDÞDDÞDDÝEDÝEBÞFCÛFBÚEAÙD>ØE>×D<×D<ÙD=ØE>ÔD<ÓF?ÉF>ºA8§;1˜8,Œ9+…<-ƒ@0@1~?0=/ƒ:1„:/‡9/ˆ:.„:-„;,„;,ƒ:+‚:,‚:,9-9-9-9-~:/~:/~:/~:/~:/~:/}90|90}90{8/{8/{8/{8/x8.{;1y;0y;0y;0x:/x:/x:/v:/s7-s7-s7-r6,q5+o5*o5*m4)j1&o6+l3(h2&k5)h2&l6*|F<ŠOGŒOJPKRMSN‘VPWPŒZQ‰]R…aUy_PiZGd_IdhO\fKN]@EU8AQ4=M0<K.?M3CQ7FR:GS;BL4>G2:A/9=,9=.9=.8<-7;-7=36=56;46<2:<1;=/<?,<A*JS4Ve>bxIj†Ln‘Qs›Tw¡Wx¢Z{¢ar˜[e‹N\‚EZ€C\‚E\‚EZ€C_…H`†Ia‡JbˆKa‡J`†I^„G]ƒHY{HNp>Eg5haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTrfXth\sg[mcYjaXle]snhzwp~w† ”¨¥œ«§œ¨¤™£‘™–‡z{kcfSOR?GJ7EH5BE2BE2EH5KL<JH9GD5D>0A9,A7+@6*F4(S5*qB8ŒPHŸPK¯IG¿GIÌEIÓBEÖ@BÙ@BÚBAÛCBÚEAÚEAÜDAÜDAÞDDÞDFÞDFÞDFÞDDÝEDÝEDÚDCÚFB×FAÖF>ÔE=ÔE=ÓF=ÔE=ÕF>ÔA:ÓC;ÎE=ÁB9®>3ž9-‘;.Š</„?0?/€>.€=-;/„:-†:-‡;.„:-ƒ;-‚:,‚:,‚:,9+9-9-~:/~:/~:/~:/}:1}:1}:1}:1|91z:1|91y90y90x8/x8/v7.y:1y:1x90v:0v:0u9/u9/t:/r7/q6.q6.p5-o4,n3+n3+m4+j1(m7-j4*h2(j4*f2'j6+}D;NGNHQJTLUOŽWPŠYRƒ[Q{YMv\OkZJ]UBYXDY^HOYA?K3:H/7E.4B+5A+8D.=I3CL7EN9BK6?H5<E2:A/8?/7>.5<,4:,5<45<56;56;49;0:</;>-;@)GP1Ra:`vGi…Ko’RuVy£Yy£[xŸ`n‘W`ƒIZ}C[~D^G^G]€F`ƒIa„Jb…Kb…Ka„J`ƒI_‚H^IW|ILp@Bf6haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTkaUndZpf\lcZkd\rmg„|‘Œ§£ µ±®ÄÁ¼ÉÆÁÉľÅÀºÀ¹±¹²¨¤œˆ‚rfcTPQ?FI8>E3;D1:F28E38E38C2:B3<B4@C8CE:GE9>4(P:/e?6€EA¡PO¿X[ÊQVÊCIÕFJ×EFÚFFÛEDÝEBÞDBÝD?ÞCAÞDDÞDFÞDFÞDFÜDCÜDCÜDCÚDCÙEA×FAÕF@ÓF=ÒE<ÐF<ÑG=ÔE=Ô?8Õ@9ÐC:ÆC9¶A7¥=0–=/Œ=.†>/‚?/>.€=-<-ƒ;-„:-…;.‚:,‚:,‚:,‚:,9+:+9-~8,~:/~:/~:/~:/}:1}:1}:1}:1z:1z:1y90y90x8/v7.v7.t8.w8/u9/u9/s9.t8.s9.r8-r8-q6.q6.p5-o4,n3+m4+l3*j4*h2(l6,i3)f2'h4)e1&i5*{B9ŽMG’MH‘PJTLVO‡XNYO|\Qs\Nk[L`WFVSBPSBJQ?@I64@,3<+2;*09(09(2;*5>-9B1<E4?H7?H5>G4:F2:C25@/3>-1<,3:33954954928919;.;>-;@*CL/O^7]sDi„Mp“SwŸYy£Yw¡Yq˜Yf‰OZ}CX{A\E]€F]€F^G`ƒI`ƒI`ƒI`ƒI`ƒI_‚H^G]€JV{HJn@Ae7haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlbVj`VjaXkdZkg^upjˆ…€Ÿžš°°®ÃÂÀÓÒÐâáßçæäçãàãÞÚÞÖÓÙÎÈμ²¸¥——‡zym]_YIKL:@E1;D/>J6=H7=F5;C4;>5:;3983880==3C<2N71a84ˆHH¯]_Å`dÊWZÍQSÓNO×MKÛKJÞHGáFDãDAâBBßCDÞDFÞDFÝCEÝCEÜBDÜBBÛCBÚDCØD@ÕD?ÓF?ÒE<ÐF<ÐG=ÔE=Ù@:Ù@:ÑB:ÈC:¼C:¬@4™;/Œ9+‰=/ƒ>.>-€=,<,ƒ;,ƒ;,„<-‚:,‚:,‚:,9+9-9-~8.}9.~:/~:/}:1}:1}:1}:1}:1}:1z:1y:1x90x90w8/t8.s7-r8-t8.s9.r8-q8-r8-p7,p7,p7,o6-o6-n5,n5,m4+l3*k2)i3)g1'k7,h4)e1&h4)b0%f4)zA8MG’MH‘PJŽULˆXNYOxZOr\Nk^N^WGRPAKN=CJ:9B12:+08)17+17-06,/5+/5)08+2:+4<-9D4;F5=H7<I7;F56C13@,1>-.800621622717829;0:<.:?)?H+KY5[qChƒLq“Vwž[w¡YsœVgP^IUx@WzB[~F[~F[~F]€H_‚J_‚J_‚J_‚J^I^I]€H]€JUvIJk@@a6haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlbVpg^ng_lgatqj‡„¡ œ¼¼ºÎÐÏÏÏÏàààòòòúøùû÷ö÷óðñìéðâßèÐÆÝÁµÁ«¢‘}ub^\GKM7CH2AI2AI4@G5BD7AA7B=9C97?:69<5>?7B71J.+d66QR³giÆnmÀ\\ÇZWÐVS×QNÜLKâHHæCDåBCßCFÝDFÝDFÝCEÝCEÜBDÜBBÜBBÜDCÙCB×C?ÓD>ÒE>ÐF<ÐF<ÔE=ÜC=ÛA9ÒB:ÊD;¿E:°A6œ:-‹5&Š</…=.‚=-€=,<,<,ƒ<*„<-‚:,‚:,‚:,:+9-~8,}9.}9.~:/~:/}:1}:1}:1}:1}:1{;1y:1w;1x90u9/t8.s9.r8-q7,r8-q8-p7,n8,p7,m7+o6+o6+o6-o6-n5,m4+l3*j4*i3)h4)f2'k7,h4)c1&e3(b0%e3(xB8ŽMG’OIŽRJŠUMƒXOzZOq[Mh\LZTDIJ:?C4>D69A208+/7*6<247058157247025.06,08-19,6A3:E5=J9>K9<I77F32A,1>-,6..400511606718:/:<.:?+<E*IW4YoAg‚Mp’Vv\užXp™U`†IX{CSv>WzB[~FY|DY|D\G_‚J_‚J^I^I^I]€H]€H]LStIHhA?]7icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSjcSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUldWibZgd]vsn“’Ž¯¯­ÄÆÅÚÜÛêîïóôöö÷ùüüþÿÿÿÿÿýÿûúü÷ôýòì÷áÔòØÇàʵƶŸª ‡ˆ„ibbFEH-DH/CG0FE1GD5F<3C60F42H:9>=9>?:B:7I75cGF’jjÅ“’è­©Ò‹‡ÇtnÀ]XÆSPÕONßJLçFKéFKßEGßIKÚDFÔ;>Ø>@áGIàDGÖ:=Ú@@Ú@@ÙA@ÖB>ÔC>ÑB<ÐA;ÑA9ÞC>ÛA9Ó@9ÊA9¾B8°@5Ÿ:.8*Œ=0‡>/ƒ>.>-€=,<+=*<,:+9-9-~8,~8.|8-|8-|8-|90|90|90|90z:1z:1z:1z:1y=5w<4w;3u:2t91q8/p7.p7.o6-m7-m7-l8-m7-l8-m7-m7-i2+m6/p92o81k4-g2*g2*h3+e0(i7.d2)]-#`0&_/%b2(s>6ŒOJPKˆQJRJ}YMv_QfYITN>DE5>E5:C25@04</3;04:04:068378366446135016//6..6+.9+2=-6C2:G6:I68G44C.1?.*4+,2.-2..3-45/79.:</:?+6>&DR1WlCh‚Rs”]wž_r›Wk”R[~DXyDTu@Tu@WxCZ{F[|GZ{F^JbƒNbƒN^J\}H_€K`L^~MTsJFd@<W4icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUldYgd]onj†…ƒ¤¤¢ÁÃÂÖÚÛêîï÷ûü÷ûþøüÿüýÿþþþÿÿýÿþúÿüùÿúóÿðàûëÔíßÅ×ͲÀ»¤£„‚ƒcgjKLQ3GJ/EC.GB/H>2I:3L95K<9?:7BA?MHE]RPyjg£Ž‹Î²®èÅ¿ÿ×Ñ쳪͂|Àc^ÊVVØRSßHMÚADÖDEÕEEØHHÜJKÛEFÕ<>Ö<>ÛACÙ??Ù??ÙA@×A@ÖB>ÓB=ÒA<Ó@9ÜA<Û@;Ó@9ËB:¿C;±A6 ;1’8-Œ=0‡>/ƒ>.>-€=,<+<,<,:+9-9-~8,}9.|8-|8-|8-|90|90|90|90z:1{;2{;2z;2w<4u<3u:2s:1r90n8.o6-m7-m7-l8-l8-l8-l8-j8-l8-l8-k6.n70o81n91l7/i4,g2*e3*c1(d4*_/%^.$b2(^.$`0&p>5JE‡RL‡XR~XOrVKdRDQJ:>?/:A16A05@03>04<14<15;17:379477577557246116//6./7,.9+1<.4A08E49H58G44E24B1.8/.5..3--2+23+46+8:-9=,7?(DQ3WlEh‚Ut•`wbp˜YgPY|DWxCTu@Tu@VwBYzEYzEYzE[|G_€K_€K\}H[|G^J^J^{MSnKF_A9R4icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUneVneVlfZed_y{x—™˜²¶·ÍÑÒäéìôùüúÿÿûÿÿüÿÿýþÿþþþÿþüÿÿûÿÿúÿÿôþüçúùÝïðÑáåÄÒØ´¼ÄŸ ¨ƒ‡‘l`gEQX7DG,DC.JD4LD7KA8I>:C;9SJKia_wvœ’¾³¯ÙÎÈêÜÓþèÝÿóéÿäÛð©£ÃecµBEÇDIÚRVÛUTÑMKÊDAÍCAÔFE×EFØDDÙCDÖ=?×>@Ø@?Ö@?ÖB@ÓB?ÓB=ÔA:Ù@:Ù@:ÒB:ËE<ÀD<²B7¡<2“9.Ž<0‰=0ƒ>/>.=-~<,€=-€=-9-9-~:/}9.}9.|8-{8/{8/}:1}:1{;2{;2{;2{;2z;4x<4t;2q;1r90o9/n8.l8-l6,k7,l8-j8-j8-j8-j8-i9-j8-j8-n91m80m80m80m80i7.f4+c1(d2)a1']-#_0&c4*\-#_0&sD<}PJVP~YQpTI^J?OC7?<-46(2;*0;+1<.2=/4<14<15;17:379479668357257227007/08-.9+0;-2?.6C27E48G48G49F54>33:2/4-,2(/0(13(57*6:)6>'DQ5YmJk„Zw—fwœfl“Z_‡KWxCWuCTr@Tr@VtBXvDYwEYwEZxF]{I_}K]{I]{I_}K^|JZwKPgJAW@3I2icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSjcSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUneVneVneVneVmg[jkfƒ‡ˆ£§¨¹¾ÁÐÕØåíïóûýõýÿûÿÿûÿÿüÿÿüþûýþùþýøÿþ÷ÿÿóøýæôýÞî÷ØæòÎÝéÃÎÚ´¶Á™¡«†€‡efmLMQ6FH0HJ5KI:HD9D@7OGDj`_‹€¤š™·¯¬ËÆÂÞÛÔêæÝúñèÿûñÿ÷íÿÝÕû¶±åŽÊcd°@?ÃPKÉTMÉPHÃF@ÈGBÔMJÖKHÐ@?Ò>>Ó??Õ?>ÕA?ÕA?ÓB?ÓB=ÓB=Ö>9Õ@:ÒC=ÌE?ÀE>²A9¢=5•;2Ž<1‰=0ƒ>/>.=/~<,€=-€=-9-9-~:/}9.}9.|8-{8/{8/~;2~;2|<3{;2{;2{;2z;4x<4r90o9/o9/m9.l8-k7,j6+h6+i7,i7,i7,h8,h8,h8,h8,h8,m;2l7/j5-i7.j8/j8/f4+a1'e5+a2(].$a2(b3)Y* a2(yNE\VvWRiNGWC:I<3@:.:;-8<.08)/:*3;.4</5=25;169069079468368349238139/19.19..9+/:,0=,2?.5B17E4;H6<I89C87?428.-3'.0%/1$24&48'4<'ER8]pPr‹d{šnwœifXU|ESsATr@Sq?Sq?Tr@UsAVtBVtBWuC[yG]{I\zH^|J_}K\zHWrIJ^E<M;.?-gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSicSjcSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUneVneVofWofWng]qqo‡Œ¤©¬·¿ÂÍÕØãíïòüþôþÿøÿÿúÿÿûÿüýÿúüýõúüñùùíöøêöÿèóÿäðýáîùÙéôÒÞèÅÊÒ­¶¾™£}‚bY]BGL5FK7FJ9CG9AC8c^X…}z«¡ŸÁ·µÌÂÁ×ÏÍæáÝñîéú÷ðüõëÿñæÿòéÿôìÿåß騤·hc¦LAµPDÁYNÇ[QÆQH¿D=ÂA<ËDAË@=Î@>Ð@?ÑA@ÒC?ÑC?ÑC?ÒC=Ó?;ÒA<ÐE@ÉE@½C>¯@9 >5•=3Ž<1‰<2ƒ=1=0=1~<.=/=/~:/~:/~:/}9.|90{8/{8/{8/|<3|<3|<3{;2z;4y:3y:3w;3n70m80l7/l7/k6.h6-h6-h6-i7.h8.h8.g8.g8.g8.g8.h8.k92h6/f4-g5.i70h70e4-b1*c2+b3+_0(]1(]1(V*!b6-{ULtYRaNHN?8A7.=6,;9-9;.9<139-3;.5;/6<06<07:/58-47.69049238139/39/2:/19.19,.9+.9+/:,0;-3>.6C2:E5<G7=E8:B55;/06(02%/1$13%15$2:%GS;buWwk|›rq•g\‚QJp=Oo>Qn>Qn>Qn>Qn>Qn>Sp@Sp@WtD[xH]zJ]zJ_|L_|LZwGRlECU?6D7(6)gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSicSjcSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVneVofWpgXpgXng]lnmz‚…“š «µ·ÄÎÐÜæèí÷ùôþÿõþýöÿüúÿúûÿùûþóøúíõöèñôãôýêôýèôüåóùßòöÛéìÍØ×¹ÅÄ¥±°’ŽregOMP;GK:FM=GOBKQG{{sŸš”ž¸ØÎÌßÓÓçÛÛóëéü÷ôðïêüüôÿÿöÿýóÿùïÿóêÿçÞÿ×ËØ“ƒ¸eS£J:´TF½WIµF;·@8ÈKEÇC>ÊC?ÌB?ÎC@ÎC>ÎC>ÍD>ÍB=ÑB<ÒC?ÎDAÅD?¸A=ª=8ž;5•<4Ž;3‰<2ƒ=3=2=1~<0=1=/~:/~:/~:/}9.|90{8/{8/{8/|<3{;2{;2z:1y:3x92w81u91n70l7/l7/j8/i7.i7.h6-g7-g7-g7-f7-f7-f7-f7-f7-f7-h70h6/g5.g5.g6/h70g6/f5.a2*e6.^2)\0'`4+a5,i=4uSJXG@E>6<5/95,;8/8:/57,36+69.5;/7:/69.69.58-57,36+28,19,28.19,19.19,19,19,.9+.9+.9+/:,0;+3>.6A17B2<D5:C28?/5;-46)24'13%04%07%HT>ex\umt’lf‰_RwKBh9Kk<Nk;Pm=Pm=Nk;Nk;Ol<Qn>VsCZwG]zJ^{K_|L_|LVsCNg@<J9/:2$.&gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSicSjcSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVneVofWpgXqhYoh^hikmtz…Œ”£¬±¿ÈÍÓÞâåðòðüüòüûõþùøÿ÷úÿöüÿòúýìøùçö÷çööê÷÷ëú÷èüöæýõâ÷ìÖçØÃÕƯÀ±šž“}un[ZWFPQCSVK[bZeld•˜²²¨ÕÎÆèÝÙóããúêëÿñôÿ÷ùÿþûþýùùúôøúïüüðÿÿóÿÿñÿûêÿæÑñª”¼o[©VD®RCµPD»LA¿JAÂG?ÆE?ÉE@ÊE@ÊE>ÉD=ÈC<ÉB<ÑC?ÐE@ÌEAÂC=³=9¦;5œ;5•<6Œ<3‡=4…<5=4<3~<0=1=1~:/~:/~:/}9.|90{8/{8/{8/{;2{;2y:3x92w81v70v70s7/n70j8/j8/j8/j8/h8.h8.h8.g7-f7-f7-f7-d8-d8-d8-f7-g6/h70i81i81h70i81j;3l=5g80k<4b6-a5,oC:xLCtI@nMDC9056.45/8918;247.14+25,58-58-57,46+46+46+46)37)/7(.9)08+.9).9+.9)08)08)19*08)08+/7*08+19,3;.4<-9B1:C0;B0:A1:<.68*24&/3$29'IU?cu[m„gf„bWyTInE?d8Hg;Li;Nk=Nk=Li;Li;Mj<Ol>UrDYvH[xJ]zL^{M\yKQn@G_;6B4+4/#)%gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSicSjcSjcSjbUlbVlbVmcWmdUmdUmdUleUmfVngWogZnh\oh^mjekormtzƒŠ¥®³ÃÌÑÕßáæîñôüþôýú÷ýùùþ÷úÿôüÿòüÿñüÿîýþðûøïþúñÿùïÿúíÿùéÿòßïàËÝηÁ²›¢—|ubb_NXZL]cWmwn|†}¦¬¢¾ÀµÚÕÏîäâüîîÿôôÿô÷þôõÿùùûúøûýøüÿúøÿõôüñ÷ýñÿÿñÿùèÿôãÿÌ»½p›QD©SFµSH²C:ÀJ@ÄH@ÇG>ÉF>ÈE=ÇD<ÆC;ÆC;ÍG>ÌG>ÇG>¼C;­>5Ÿ:2—:3‘>6Š=5†=4ƒ=5=4€<3;0;1;1~:/~:/~:1}90|90{8/{8/{8/z:1z:1x92w81v70u6/u6/q6.m80k90j8/j8/i9/i9/i9/h8.g7-f7-g7-f7-f7-f7-f7-f7-f5.j81m;4k:3j92j:0m>4oC8l@5oD;d<2c=2zVJ†dZyWMbLA>:13814927<54:0/5+25,9<336+25*24)03(13(25*46+47,.6),7)/7*-8*/7*/7*/7*/7*19,08+08-/7,/7,/7,08-08+7?09B1<E4=D4;A38<.26'-4$2;*JVBcr[h|a]vXOmKFfAAa:Hd;Kh<Nk?Nk?Kh<Jg9Li=Nk=TqEWtHZwK[xL]zNZvMNjAC[;2>4*00!''heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjdVjdVjdXldYlcZmeZmeXmfVg`NjeRnkXol]he\feasqr‚†Š“–ž¡«³¶ÃÈËØÝàêîïö÷ùùûúüþýþþüÿÿúýþöúýòùüñúýòûþóùúòúúòùùíüúëþüçù÷ÞéåÊÕÔ¶º¹›˜˜|qtY_dMbkXr}l„‚‘›´¹²ËÌÇãâÞòîë÷óòû÷öýùøüø÷ÿþüþþüþþüýÿúýÿúýÿúýÿúýÿúúü÷ÿÿúÿûöÿêåا £`X›D=µNE¿MCÂF<ÄD9ÊE<ÎI@ÎKAËH@ÇG<ÆG8ÃH8½J8³H8¦E5šB4‘B5‹C5†B5„B6‚@4‚>3‚<2„:1†91†9191~:1|91{80z7/z7/w7.v6-w7.w7.w8/w8/v7.u6-q5+n3+l7/i81i81h70h70g6/g6/g6/f5.g6/i70i81h70g6/e4-e3,h3-j5/m80k90j:0i;.i=0kA3gB2jI:dH:v_O~k\ŠxjŒoRJ=79.4:04:039/39/39/28.28.17-17-36-06,25,/5+14+/5+/4-.5-/4-.5-/4-/4-/4-/4-05./4-/4-.3,.3,/4-/4-/6.1;23=26@58B79D67B45@03>-4?.DQ=WeN[kQPbHEX<@T8BW6Ic>Ke>Kf=Kf=Je<Je:Lg>Oj?UpGYtK\vO]wP]wRWqNHb?;O6&1+&+.$),heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjcYkdZlc\md[meZmfVidQjhSmjWjk[gg_lll~„“š¨¯µ¸ÂÄÑÖÙâçêòóõûüþÿþÿÿþÿþýûÿþúÿÿúþÿùûüôøûòöüò÷ýó÷úñøúïøúí÷úéùûåòõÚßâÃÌЯ´¸—‘–vkqUYaI_kUtoŒ˜Š§œ¿Á¼ÓÓÑççåóóñ÷÷õûûùüüúûûùþþüþþüþþüþþüþþüþþüþþüûÿþõÿÿõÿÿþÿÿÿûúÿíêð¿ºÂ~uŸKA¯M@¹K>ÂL@ÅK>ÃE9¼=4¾?6ÃE9ÄF7ÃJ7½L:³J7¦F6™C2‘C6E7…C7‚B8A7>5‚<4ƒ:3†91„93~92}:2z:1z:1y90x8/v7.v7.u6-v7.t8.t8.t8.r6,o5*m4+l7/i81j81h70i70h70g6/g6/e3,e3,g5.h6/j81j81j81k92k60l71k90k;1k;/j>1j@0iD2gH6kP=gRAufSueŒ…s†ƒrKL<69.39/39/39/28.28.28.17-17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4.05//4..3-.3-.3-.3-/4./6/.80/:21=34@66B66B66B45B16C1CP>P]IR`IIW@AO6BP7EU:Jb@Jd?Ke@Ke>Ic<Hc:Id;Je<SnEXrK\vQ]wT[tTTmOC\>6I5&1-',0$)-heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjcYkdZlc\md[meZmfVmhUkiTmjWjk[kkcwww‘’—§¬²¿ÆÌÒÜÞìñô÷üÿþÿÿþÿÿÿþÿÿþÿþýûÿþúÿÿúýþøúûóõøïñ÷ëñ÷ëô÷ìõùëöøêõøåõ÷áîîÔÛÛ¿ÉÊ«°±’“–yuy`kpZt{iˆŸ§œ®µ­ÍÏÊÞÞÜïïíøøöûûùþþüþþüýýûþþüþþüþþüþþüþþüþþüþþüýÿþûÿÿûÿÿÿÿÿÿûùÿúôÿ÷íýÑÆØž”L=¥RB©L;§@1·G;ÏYMÏUJ¼@4ÄD7ÆH:ÃK=¹I;ªB7?3—@7“E;‰@9„A9A8?6~>5}=4<4}=4z;4x<4w;3w;3u:2t91t91t91r90r90r90r90o9/n8.l6,k5+l7/j81l71j81k60i70i70h6/g5.g5.f5.g6/h70i81k:3k:3l;4j;3i:0h<1k?2jC4iD2fE2fI7lVAjYGujV†m‘Ž{€mEF658-28.28.28.17-17-17-06,17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4./4./4..3--2,-2,.3-/4..5.+5-+6.-9//;12>24@46B47D38E3?L:ER>CQ:;I28F->L3DT9J_@Jb@LdBKc?Ia=G`9F_8G`9RkDXpL]uS^vVZqTPgK=T8.A.&1-',0%*.heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjcYkdZlc\md[meZmfVniVljUlkWlm]pqi€‚ž¡¦¹¾ÄÄËÑÛåçõúýûÿÿüýÿüýÿþüýüûùÿþüÿÿûÿþùûüôõöîîñæéïãçíßíñâðôåñôãñôßòñÜêêÐØؼÇÇ«²±•¡¡‰‘“}“€œž‘ª­¢¶»´ÀÅ¿ÜÜÚééçööôûûùýýûÿÿýÿÿýýýûþþüþþüþþüþþüþþüþþüþþüþþþûûýÿþÿÿþÿ÷òïüóìÿüóÿûíÿôäìñ¹p•P@¢O?¸XJ·M?µE9ÀG<ÁA6ÈE;ÅI?½G=¯@9¡<4š=6–A<?;‡@<@:}@;z?9y@9x?8x?8v=4v=4v=4u<3s=3r<2r<2q;1o;0o;0o;0n:/k9.j8-j8-i7.m82n72m61l71l71k60i70i70l:3j92h70f7/f7/f7/h91f:1j?6f>4e=1f>2hC3iE5fG3cG2cJ6hV@i\IskV…‚oŽzpq_9=,47,28.17-17-17-06,06,06,17-17-17-06,06,/5+/5+/5+.3-.3-.3-.3-.3-.3-.3-.3-.3-.3--2,-2,-2,-2,.3--4-*4,)4,*6,+7-.:.1=14@25A36C2:G5<I78E12?+2@)8F/>N4DX<E]=K`AJb@K`?G_;H^:F^:SiEXpN`uV^uXZnSLcI9M4):(%.+%*.$)-heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjcYkdZlc\md[meZmfVlgTkiTnmYop`tum…‡†¤§¬¿ÄÊÎÕÛæðòûÿÿûÿÿûüþýþÿÿþÿþýûÿÿýÿÿûþýø÷øðïðèçêßàæÚÞåÕçëÚêïÛíðÛìðÙîîÖèèÐÚØ¿Ìʱ½§·µ ±®¶´§Á¾µÉÈÃÒÓÎÙÙ×èèæòòðúúøüüúýýûÿÿýÿÿýüüúþþüþþüþþüþþüþþüþþüþþüÿþüÿüÿÿüÿÿûúüû÷ýÿùþÿøþÿôÿÿíÿþìøßËÅœŠbP–J:¥L<´P@¼L>¿@7ÆC;ÅF?¿D=±>;¦:7ž:8™>;‘=;Š?<„@=}@=xA<tB;rC;rC;q?6s>6s>6r=5r=5r=5p>5o=4n>4m=3l<2k;1j;1i:0i:0j:0n72p62p62m61m61l71i70i70l;4k:3h91e90e90e90e:1d<2fB6cA5cC4dD5dG5dI6bI3_I2^L6eV?jbMrmW„ƒo„‡r[`L3:(28,28.17-17-17-06,06,06,17-17-17-06,06,/5+/5+/5+.3-.3-.3-.3-.3-.3-.3-.3--2,-2,,1+,1+,1+,1+-2,,3,,6.+5-*4+*4++5,.8-0;-2=/2=-5@/6A05A-1=)1=)5A-8F/=O5@T8FY=H\@J]?I^=K^>K`?TgG[pQcvZauZYkSJ]G6G4&4%$-*$),"'*heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjcYkdZlc\md[meZlfVjgTkjUlnYorasvm…„Ÿ¤¨¸¿ÇÖßäí÷ùûÿÿûÿÿûüÿþÿÿÿþÿþýûÿÿûÿÿúüüôóõêëíâãçÙÝãÕÜãÑäéÓçìÕéíÖêìÔëëÓèæÏßÚÄÓθÓκÌƶËøÐÉÁ×ÒÎàÛØêæåðïíóòðùù÷ýýûýýûýýûÿÿýþþüüüúþþüþþüþþüþþüþþüþþüþþüÿýüÿûüÿøùÿþýþÿýùÿýôÿøïÿõ÷ÿöð÷çÿÿíÿîÛͧ”¤kX¢[GªWE­L;¹D:ÀD<ÀE>¼E?´A>ª=:¢:9š;9•=<?=…?=}@;wB<rC;oD;oD;p?8q?6q?6q?6q?6p>5o?5o?5o@6n?5m>4k<2h<1h<1h<1l<2o83q62p62p62m61l71j81i81h70g80e90e:1d<2e?4f@5dB6^B4aG8cL:dM;cM8`K6]K3]M4]Q9bX?mhRss[€ƒnv{eFO:4=*39-28.28.28.17-17-17-06,17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,-2,,1++0*+0*+0*+0*,1+,3,.5.,6.*4+*4+*4++5,-7,.9+-8*0;+4?/5@/4?.3?+3>-3@,7F/9K3@O8BT:GW<H[?M]BM`DUeJ\oSdtZ`rZXgRGXE4B1$2%$-*$),"'*heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjdVjdVjcYkdZlc\md[lfZlfVliVlkVkmXkn]lrhy}• ®·¾ÒÛàêóøûÿÿùþÿùúþþÿÿÿþÿúù÷ÿÿûþýøùùññóèéëÞãçØßæÖàèÓäéÒçíÓèìÓçéÑèèÐçåÎàÛÇ×оÚÓÃÙÑÆÞÔËæÝØîäãóéêúñôÿùûúù÷þþüÿÿýýýûýýûÿÿýÿÿýüüúþþüþþüþþüþþüþþüþþüþþüÿýüÿùøÿúùÿþýüÿý÷ÿþîÿùñÿÿòÿýõÿúóùëÿýíÿúèôλ«wbQ:ª\H²N>¸J=¹I>¸I@´G@¯D>¥=:œ:7–=9>:ˆ?9€A:xA:tD:pF:pE<p?8q?8q?8q?8q?8q?8p?8p?8qB:pA9n?7l=5i=4j>5j>5n=6o83r73p62p62n72l71j81i81d8/d90c;1d>3d@4cA5cA5_C5ZE4_N<gVBhWCcS<^O8[O5\R7]V<]Y>nlUtv^|kcmU2>(6B.3;.39/39/39/28.28.28.17-17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,,1+,1++0**/)*/)+0*,1++2+-4-+5-*4,*4,+5,+5,,6+-7,,6+/:,2=/6A17B27B15@04?.2?-4C.:G3=L5AO8DT:JX?L\BTbI\kTcqZ^mXUbPDRA2>0#/%&/,&,,$**heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjdVjdVjcYkdZlc\md[lfZlfVolYmlWjlWgkZflbr{xŽ˜š¨±¸ÊÓØãìñøýÿ÷üÿúûÿþÿÿÿþÿúùõÿÿúýýõøøîðòåéëÝåéØãêØåíÖæìÒéíÒêíÒèèÎèæÏèãÏáÚÈØÐÃØÎÄÝÒÌêßÛøíëÿôöÿõùÿõûÿùüþüýÿÿýÿÿýþþüþþüÿÿýÿÿýýýûþþüþþüþþüþþüþþüþþüþþüÿþúÿýûÿýûýüúùýüøÿÿõÿÿóÿÿíýúóÿûûÿúÿÿôÿöæÿóßÿãÍ×­•©oY¨WD®Q@¬O>¯OA±OB­K@¤C<™<5•>7?6ˆ?8A7{B7uD6qE8qE8p?8q?8s>8q?8q?8q?8q?8p?8sB;qB:o@8m>6l=5j>5m>6o>7o83q73o83m82m82i81h91f:1f;2d>3d@4bB5`C5]A3\@2WB1TG4[S>f^Gi^HbX?ZS9ZS7\W:ZV;XW;kmUsw^u}fUaI&28D03;.4:04:039/39/39/28.28.17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,,1++0*+0**/)*/)+0*+0*,1++2+)3+*4,+5-+5,,6--7.-7,,6+.8-2<16A39D69D47B46A10;+2?-5B09F2<I5@N7FT=JX?R`I[hTanZ\iWQ^MBN@/;/",#+1-(.,&,,heVheVheVheVheVheVheVheVifWifWifWifWifWifWifWifWkeWkeWkdZle[md]ne\mg[mgWqn[kmWknYkr`jrgpyv‡‘“Ÿª°»ÄÉÐÙÞêïóöûþüýÿþÿÿÿþÿþýùÿÿúþþöúúðöøëôöèðôãêñßçïØðöÚíòÔëîÑììÒèæÑáÜÉÝÕÈÞÔÊáÔÎèÚÙòääúëîþòôÿ÷ûÿùÿÿüÿÿýþþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþÿúÿþúÿþúþþüýÿþûÿÿúÿÿúÿÿûÿÿþÿÿÿÿýÿûõÿûñÿüìÿûåÿóÛÿêѺ‚i¦bK—O9ŸT?¨ZF£RAJ: M?Ž<0‹=0†>2=/x=/t?/sB3tD6r=5r=7t=8s>8u@:u@:t?9q?8sA:q@9q@9q@9p?8n?7o>7o>7k92m82l:3l;4l;4h<3g<3c=2c?3^>1dG9cG9T=-N9(M8'@1WQ;PN7KI0OK2]Y>ieJeaDVU7XX<]`CosZz€fdlU=I1-9#2>*4</5;14:04:04:039/39/39/39/39/39/28.17-17-17-06,16016005/05//4./4./4./4.,1+,1+,1+,1+,1+,1++0*+0*.5.-4--4-,3,-4--4,.5-.5-+2*-4,07/5=29A6=E8?G<?J<7B25@/3>-1=)2>*9E/BN8IU?O[GVbN]hWYdTLWI<F;/9.)3*)/+(.*'-+heVheVheVheVheVheVheVheVifWifWifWifWifWifWifWifWkeWkeWkdZle[md]ne\mg[khWonZjlVknYkr`jtiq|x‰”–£®´¾ÇÌÒÛàëðô÷üÿýþÿþÿÿÿþüþýùÿÿúþþôûûï÷ùëô÷æðõáêòÝèíÖêïÑæëËäçÊææÌãáÌßÙÉÞÔÊßÔÎçÙØíßßöçêûïóÿôøÿ÷ûÿúþÿüÿÿþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüýÿüûÿúûÿúýÿüýþÿþýÿÿüÿÿüÿÿûÿÿüÿÿüÿÿûùÿüõÿþñÿÿíÿûåÿòÙÿëÑà±—§u\‘[C–ZBšYCšVC™R@ŽG5‹F6ˆE4ƒD3|C2wB0s@/o>/u@8s>8u>9u@:t?9o=6p>7sA:q?8p?8p?8n?7o>7m>6n=6m>6k<4l=5m>6k?6j?6gA6eA5bB5dG9[A2^G7^I8N=+F7$G8%>6!LL4GK2DG,DD*MM1\[?baC`aBYY=dgJsw^sy_X`I:D,/;%7C/6>16<26<26<25;15;15;15;15;15;15;14:04:039/39/39/27127127116016016005/05/.3-.3--2,-2,,1+,1++0*+0**1**1*)0))0))0)*1*+2*,3+.5--4,.5-07/4;39A6?F>BJ?;F8:E57B14?.3?+6B.<H2@L6LXDS_KYdTWbRLVK=G<1;2+5,+2+*0,)/+heVheVheVheVheVheVheVheVifWifWifWifWifWifWifWifWkeWkeWlcZmd[md]ne\mg[khWmlXimVjoYktaiuiq}yŠ˜™¥²¸¿ÊÐÔÝâíòö÷üÿüýÿýÿþÿþüþýøÿÿ÷ýýóúûí÷úéô÷äïôÞçïØåëÑâçÉÞáÂÝÝÁÞÞÆÞÛÈÝ×ËàÕÏäÙ×îââóçëúîòÿôøÿ÷ûÿùüÿúýÿýýÿþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüýÿüøÿüøÿüûÿþþþþÿüÿÿúÿÿùÿÿøÿÿùÿÿúÿÿúúÿýøÿÿöÿÿóýÿïÿúæÿôÜÿøàÿìÓ㿧¬‚j‡YB…Q;’[F—]IS?F2u>)r>)s@+tD0vE4q?4n<3q<4tB9sA8o?5qA7xH>n>4m>4m>4k?4l=3j>3l=3j>3g?5gA6gA6gC7eC7cC6`C5^D5bK;UB1ZI7`S@RG3C;&E=(FA+AE,BH.AE*<@%?B%NN2_`AijKaaEnqTvzagmSJO94<%4=(=F38>28>48>48>47=37=37=36<28>48>47=37=37=36<26<26<25:449349349338238238227105/05//4..3--2,,1++0*+0*).().().().().(*/)+0*,1+160/4.,1+,1+/4.6;4=B<AH@@K=>K:<I78E34A-2?+3A*5C,DQ=KXDQ^MQ^MHTH<H<2>4.8/-4--4-,3,gdUgdUheVheVheVheVifWifWifWifWifWifWifWifWifWifWkeWkeWlcZmd[md]mf\mg[jiWkmXimVjoYjs`hthm|wˆ˜˜¦³¹¿ÊÐÓÜãëðööûÿüýÿýÿþÿÿýÿþùþþöýýñúûí÷úçô÷âîóÜåíÕâèÎÛàÀ×Ú»ÖÖ¼Ù×ÂÝ×ÇÞ×ÍåÛÙìààøìðûðöÿõûÿùþÿúýÿûûÿûûÿýüÿþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüýÿüøÿþøÿþûÿþþþþÿüþÿúÿÿùÿÿøþÿúýÿùüÿùùÿýúÿÿøÿÿøûÿõüþðÿÿíÿüéÿñßÿðÝÿïÚñÒ½´z{R>tJ4uH3vI4zM8}P;yL7nA.e7'{M@sD:qB8sD:oC8g;0d8-g=1i?3i?3i?3g?3f>2f>2f>2e?2b@4bB5`C5_C5_C5[D4ZE4WD3XI6OB/\T?oiSc^HMK4IG0IK3>D*?H-@F*<B&<A#FI,XY:deFmmQxx\tv^[_F@C.6;%8@+<C19?39?59?58>48>47=37=37=39?58>48>48>48>48>48>48>47<67<67<66;56;56;55:45:438238216005//4.-2,,1+,1++0*+0**/)*/)+0*,1+-2,-2,05/.3-+0*+0*-2.2718=9;B:@K=@M;@M;=J68E13@,1?(0>'<I5BO;HUCIVEDPB;G;2>4.:0,6..5.-4-gdUgdUgdUheVheVifWifWifWifWifWifWifWifWifWifWifWkeWldWlcZmd[md]mf\mg[jiWkmXinWiqZgs_drejyt…••£²·½ÈÎÒÛâêïõôùýûüÿýÿþÿÿýÿÿúÿÿøÿÿóþÿñûþë÷úåðõÞæîÖâèÌÙÜ¿ÕÕ¹ÒйÔѾÚÔÈàÙÑêàßôéíþóùÿ÷üÿûÿÿýÿÿþÿÿþüÿþúÿþúþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüýÿþúÿÿúÿÿûÿÿþþþÿýþÿüüÿûüÿûúÿúøÿù÷ÿú÷ÿýøÿÿûÿÿûýÿúýþùùôîÿþöÿýôÿüóÿûîÿ÷çûæÕéÒÀÏ´¡¶š…”uawVCjI6lI6rM;uP>mF7iB3gB2jE5nI9nJ:oK;oK;eA1cB1cB1cB1cB1cB1bC1`C3]F6\G6\G6ZG6ZG6WH5TG4RG3PH3NH2fdM~~frrZVX@JL4GM3<E*<F+?H+AG+AF(DG*MN/TU6xw[{z^nnVUU=CB.?A,>A.:>-;>39?59?58>48>47=37=37=38>48>48>48>48>48>48>48>49>89>89>88=78=78=77<67<66;55:449338227105//4./4.-2.-2.,1-+0,+0,,1--2.-2.,1-,1-,1-,1-.210513764;4;G9=L9@O<@O:<K67F/4C,2A*6E.:I4@O<BP??M>8F71?2-9-,6--4,,3+fcTfcTgdUheVheVifWjgXjgXifWifWifWifWifWifWifWifWldWldWlcZmd[md]mf\mg[jiWkmXinWiqZgs_bpcgxr‚””£²·ÀËÑÔÝäëðöõúþûüÿýÿþÿÿýÿÿúÿÿøÿÿôÿÿóÿÿïúýèò÷àçðÕâèÌ×Ú½ÑѵÍË´Î˺ÖÏÅÞ×Ñìâã÷îóÿöþÿúÿÿýÿÿþÿÿÿýþÿúþÿùþÿúþÿúþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþþýþÿýþÿýþÿýÿþýÿüþÿúþÿùÿÿ÷ýýóýýõþýøþýùÿþüþþþÿýÿÿþÿþùÿÿüÿÿûüûöóÿøòÿýôÿþñÿýíÿúéÿòà÷äÓçÒ¿Ò»©¹ŸŽŸ„srb|]K}^LtUCaD2W:(Y<*[>,X=*`E2`E2`E2_F2`G3`G3`G3]H3\K7\M:\M:YL9XM9UM8RL6QL6NL5QQ9ikS|€gmqXSY?FL2>G,<F+<F+?H+DJ.EJ,DG*HI*LM.yx\tsWfdMTR;LI6KJ6FE3<=-<?49?59?59?58>48>48>48>47=37=38>48>48>48>49?59?5:?9:?9:?9:?99>89>89>88=78=78=77<66;55:4493382382/40.3/-2.,1-+0,+0,+0,+0,+0,,1--10.21/32/32/32-4-3?17F3=L7@O:?N7<K49H18G05D-8G0<K6>M:<J97E61?2-9-+5,-4,,3+fcTfcTgdUheVheVifWjgXjgXifWifWifWifWifWifWifWifWldWldWlcZmd[md]mf\mg[jiWjlWhmVhrZfs_cqdhys…——¥·»ÇÒØÚãêðõûøýÿüýÿýÿþÿÿýÿþùÿÿõÿÿòÿÿðüÿìøûæïôÝâëÐÝãÇÕÕ¹Î̳ÉÄ°ÊÄ´ÐÉ¿ÚÒÏéàãöíòÿ÷ÿÿúÿÿýÿÿþÿÿÿýýÿúüÿøüÿøýÿúþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþþÿüÿÿüÿþýÿýÿþúÿúøÿùøÿõøÿóøÿóøÿõüÿøýÿúÿýþÿüÿÿüÿÿûÿý÷ÿÿúÿÿüÿÿýÿÿþÿþýûûûóúøìÿÿñÿÿïÿÿíÿþíÿýíÿöçÿîàýêÛúãÑÿæÐãÊ´¥xt^GeO8bL5\H0^J2\J2\J2]K3]K3^L4^L4\M6YN8WO:WO:VP:UO9SN8PN7NN6MO7PT;`fLfoTU^CEO4AK0<F+?I.?I.CL/HN2HM/FI,OP1YX:qmRjfKa\F[V@YTATQ>MJ9BC3=@5;A7;A7;A7:@6:@6:@69?58>48>48>49?59?5:@6:@6:@6;@:;@:;@::?9:?99>89>89>8:?9:?99>89>88=78=77<67<6495273162/40-2.,1-+/.+/.,0/,0/-10.21.23.23-12+1-+9*/@-6H2;M7=O7<N4:L2:L25G/7I1:L6<M::K96G70@3-;.,6--4,,3+cdRcdRdeSefTgeVhfWigXigXhfWifWifWifWifWifWifWkeWkeWkeWldYle[md]mf\kg[jiWikVhmWhrZgt`dqgj{u‰›ª¼ÀÍØÞàçíôùÿúÿÿûÿÿýÿüþÿúþþöúúîúûíúûéøúåóöáêî×ßãÊÙÜÁÓѸÌDZž¬Æ¾±ÌüÖÎËæÝàôêòþ÷ÿÿúÿÿþÿÿÿÿþþþýÿúüÿúüÿúýÿüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüÿþüÿþüÿþüÿýþÿüÿÿüÿÿýÿýÿþûÿüøÿù÷ÿ÷÷ÿõøÿöùÿöüÿøÿÿûÿþýÿüÿÿûÿÿúÿÿúÿÿûÿÿüÿÿþÿþýÿûýüüþûþÿúùúòúüñýûïþúîÿùìÿûìÿýïÿýìÿðÛÿûâìÜÞŽu`P7RB)XH/XH.[M3[M3ZN4ZN4[O5[O5\P6[Q8UO7TO9TO9QO8PN7NN6KM5IM4JN5LR8S\APY<@I,;F(AL.?J,DM0EN1JQ2MR4JM0LL0YY=kjNhdIb^E^ZA_ZD`[GZUAQO:KJ8AB4@B5@B5>A6>A6>A6=@7=@79?59?59?5:@6:@6:B7:B7:B7;@9;@9;@::?8:?99>79>89>7;@:;@9;@:;@9:?9:?8:?9:?98?87=94;4382160/4..3/.3/.21.21,2.,2.+2++2*,4))6%$6)=!2F+8L1;O6;M5;M5;M58J29K3;M5<N6<N87H51B0.<--7,.5--4,]eN^fO_gP`hQdiUfiVgjWijXfgUhgUheVheVjdVkeWkeYlfXlfXkhYmg[kg\mf^jf[ieYgeVghVfkUenYbo]dqhsƒ€–¨¬¹ÈÏÒÛââéïò÷û÷üÿùýüüþùüÿöüþñ÷øêùúêø÷åòñÝîíÙëêÖàßÊ×Ò¾×ϼËÀ®½´¥½³©Â·±ÌÂÁÛÒ×êàèúóûüöÿþûÿÿþÿþýÿüýÿüþýüþýþþþþþþþþþþþþþþþþþþÿþüÿþüÿþüÿþüþýùþýùÿüùÿýúÿþûÿþûÿþÿÿýþÿüýÿýþÿÿÿþÿýýÿüûýøÿÿûüý÷ÿýøÿþúÿýøÿúöÿ÷ôÿùùÿúÿÿüÿÿýÿÿÿÿÿÿÿýÿüýÿþüþýþÿÿÿÿÿÿþüÿþùÿþóÿþîÿýêÿýæúôÜÿúàçàƈlUN2WN1TK.SJ+WN1WN1UN1UN1TO2TO2TN4SO4QM2RN5QO6PP6MO7KO6HM6GL5JP6FO4AJ-=F'>H&DK*FM+EL*PV4PT3KN/HK,TT8bbFccIZZ@[Y@\ZA][B][B[Y@XV=US:SQ8HF1GD1DA0A?0@>1>>2??5>@5;>59?59?59A69A48C58C58C5:B79A69@88@58?79A69@8:B7:A9:B79@8:B7;B:<D9=D<>E=8B:8B:7A88@56>14</39/271.40/51-7/-9-.;)0@&6G'7M';V+:W+;U0;T4;R8=P:>O<>P::L6@R8EW=FY=DX=@T;5H2+<),6+,3++2*ZgM[hN\hP]iQbjSckTglXhkXghVghVifWifWkeWlfXmeZmgYmgYkhYkg[kg\jf]jf[hfZefVhiWglVfo\erajwnzŠ‰œ«²ºÈÑÐÙàáéìò÷ûøþþùþúúÿøûþóùýïøùë÷øæõôâíìØéæÓåâÏÜ×ÄÒ˹ʿ­Á´¤¹­¡¼¯¦Á¶²ËÁÀÛÐÖæßæûóþý÷ÿþûÿÿþÿþýÿüýÿüýÿüýÿþþþþþþþþþþþþþþþþþþÿþüÿþüÿþüÿþüÿýúÿüùÿüùÿýúÿýùÿþúÿþýÿýüÿüýÿýþÿþÿÿþÿÿýþýûüÿþýÿþûÿüúÿøóøíçòåÝöèßûðêÿúýÿüÿÿýþÿÿýÿÿûýÿüýÿþüýÿýþÿýþÿÿýÿÿþüÿþõÿÿîÿþèÿÿäúöÝýûâäàÇ‹‡lRM0SN0QK+QK+UO/UO/TO1TO1SO2SO2QP4QP4QM2PO3PN5NQ6MO7JP6HM6EM5HQ6EN1BK.?I'BI(FM+JP,KQ-NR/PT1VZ7^bA_bCY\?TW<UU=VV>WU>XV=YW>XV=XW;WV:XT9QK3OI3LG4ID1DA2B@3A?3>@5<=59?59?59A67B48C57D37D3:B79A69A68@58@59A69A6:B7:B7:B7:B7:B7;C8<D9=E:<F;=G?<H><F;;F6<D5:B39?38=67>74>63=40>-3C)9M*BY/Ga1Op;Ln;Li=Fa>BY?<R=;L::K8=O9DV<K^BM`BL`DH\@:Q71D.+5*+2*)0(ZgM[hN\hP^jRbjSdlUglXilYijXijXkhYkhYlfXmgYnf[nhZmgYkhYkg[jf[jf]ieZhfZfgWhiWejTdmZgtco|sŽ¬³¶ÄÍÍÖÝÞæéñöúøþþúþýùþøøûòôøêóôæðñßêé×áàÌÜÙÆ×ÔÁÐ˸ÇÀ®¿³£½° ¼°¤Ã¶®ËÀ¼ÕËÊãØÞëäëüôÿý÷ÿþûÿÿþÿþýÿüýÿüýÿýÿþþþþþþþþþþþþþþþþþþþÿþüÿþüÿþüÿþüÿýúÿýúÿüùÿüùÿüøÿüøÿýüÿüûÿûüÿüýÿþÿÿþÿÿýþþüýÿþýÿþûÿýûüóîêßÙâÕÍëÝÔ÷ìæÿúýÿüÿÿýþÿÿýÿÿûýÿüýÿþüýÿýþÿýþÿÿþÿÿÿýÿþõÿþíÿýçÿþãû÷ÞþüããßƉ…jPK.QL.QK+QK+TN.UO/TO1UP2TP3SO2QP4PO3QM2ON2PN5MP5MO7JP6IN7FN6HQ6FO2CL/CM+FM,JQ/OU1SY5QY2W_8jpJy[qvVY^@KO4MP5QQ9QQ9RP9SQ8TR9UT8YU:ZV;XR:VP:RM:NI6HE6DB5CA5?A6<=59?5:@69A67B47B47D37D3:B7:B79A69A69A69A6:B7:B7:B7:B7:B7:B7;C8<D9>F;<F;?IA>J@?I>>I9?G8>F7>D8=B;>E>9C;6@74B19I/BV3Pg=XrB^J[}JXuIMhECZ@9O:6G54E2<N8EW=NaESfHSgKNbF@W=6I3/9./6.-4,ZgM[hN\hP^jRblTemVhmYinZklZklZlj[liZnhZnhZog\oi[liZkhYjfZjf[ie\ieZhfZfgWfgUbgQajWerao|s~Ž–¥¬«¹ÂÇÐ×Úáçîó÷öüüøüûõúôóöíîòäéêÜãäÒÜÛÉÓÒ¾Î˸ÉƳþ«½¶¤Ã·§Ç¹¬ÍÁµÖÉÁßÔÐéßÞóèîøñøýõÿþøÿÿüÿþýÿýüÿüýÿüþýýÿþþþþþþþþþþþþþþþþþþþÿþüÿþüþýûÿþüÿýúÿýúÿýúÿüùÿû÷ÿû÷ÿýüÿüûþúûÿûüÿýþÿþÿÿýþþüýÿüûÿþûÿýûýôïíâÜæÙÑðâÙüñëÿúýÿüÿÿýþÿÿýÿÿûýÿúýÿþüýÿýþÿýþÿÿþÿÿÿýÿþõÿþíÿüæÿüáþùãÿþçäßÉŠ†mPJ0RM0SL/SM-TN.UO/UP2UP2TP3SO2PO3ON2PL1NM1OM4LO4LN6JP6JO8HP8JS8GP3GP3IS1MT3OV4V\8\d=grHtUˆ“i›s…lnuTZaBRV;LN6NN6MM5NL5OM6RP7WS:YU<ZT>XR<TO<QL9KH9GE8EC7@B7=>6:@6:@69A67B47B46C26C2;C8:B79A69A69A69A6:B7;C8;C8:B7:B7;C8;C8=E:>F;=G<=G?<H>>H=>I9?G8>F7>D8=B;=D=9C;6@74B19I/DX5Ri?[uEZ{FWyFTqEIdA=T:2H3/@.->+6H2@R8L_CReGSgKOcG@W=6I30:/07/-4,YgMZhN\hP^jRblTemVinZjo[mn\lm[mk\mj[nhZnhZoi]oi[liZkhYjfZieZie\ieZig[ghXghVchRajWerao|s{‹ŠŸ¦¢°¹ÁËÔÔÝäéñôòúüôúøñöðíðçèìÞâãÕÚÛÉÒÑ¿ÌɶÉıþ«¿¸¦¼³¢Ê¾®ÓŸÜÐÄæÙÑíâàöìíÿôúÿùÿÿ÷ÿÿúÿÿüÿþýÿýüÿûüþüþýþÿÿþþþþþþþþþþþþþþþþþþÿþüÿþüþýûþýûÿýúÿýúÿýúÿûøÿúöþùõÿýüÿûúýùúþúûþüýÿýþÿþÿÿýþÿüûÿýúÿüúÿøó÷ìæòåÝøêáÿôîÿúýÿüÿÿýþÿÿýÿÿûýÿúýÿþüýÿüýÿýþÿÿþÿÿÿýÿþõÿýìÿûãþúßÿüæÿÿéçâÌŒˆoRL2TO2TM0UN1TN.UO/VQ3VQ3UQ4SO2ON2NM1PL1NM1NL3KN3LN6KQ7KP9JR:LU:IR5JS6OY7SZ9T[9]c?fnG‚’c’¦sŸ±›ª’¡zˆ”pr{\\bFLP7KM5LK6KI4LJ5PK5TN8VP:WQ;VP:SN;QL9LI:IG:GE9CE:=>6:@6:@69A67B47B46C26C2;C8;C8:B79A69A6:B7;C8;C8;C8;C8;C8;C8<D9=E:>F;=G<=G?<H>=G<=H8>F7=E6=C7=B;:A:7A95?64B19I/BV3Ne;Uo?Tu@RtAPmAE`=9P6-C.+<*+<)1C-<N4H[?PcERfJNbF@W=5H2,6++2*'.& \ No newline at end of file
diff --git a/libjpegtwrp/testimgp.jpg b/libjpegtwrp/testimgp.jpg
deleted file mode 100644
index 8cbb658bb..000000000
--- a/libjpegtwrp/testimgp.jpg
+++ /dev/null
Binary files differ
diff --git a/libjpegtwrp/testorig.jpg b/libjpegtwrp/testorig.jpg
deleted file mode 100644
index 9816a0c62..000000000
--- a/libjpegtwrp/testorig.jpg
+++ /dev/null
Binary files differ
diff --git a/libjpegtwrp/testprog.jpg b/libjpegtwrp/testprog.jpg
deleted file mode 100644
index 920fee2e3..000000000
--- a/libjpegtwrp/testprog.jpg
+++ /dev/null
Binary files differ
diff --git a/libjpegtwrp/transupp.c b/libjpegtwrp/transupp.c
deleted file mode 100644
index e5ec5642f..000000000
--- a/libjpegtwrp/transupp.c
+++ /dev/null
@@ -1,928 +0,0 @@
-/*
- * transupp.c
- *
- * Copyright (C) 1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains image transformation routines and other utility code
- * used by the jpegtran sample application. These are NOT part of the core
- * JPEG library. But we keep these routines separate from jpegtran.c to
- * ease the task of maintaining jpegtran-like programs that have other user
- * interfaces.
- */
-
-/* Although this file really shouldn't have access to the library internals,
- * it's helpful to let it call jround_up() and jcopy_block_row().
- */
-#define JPEG_INTERNALS
-
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "transupp.h" /* My own external interface */
-
-
-#if TRANSFORMS_SUPPORTED
-
-/*
- * Lossless image transformation routines. These routines work on DCT
- * coefficient arrays and thus do not require any lossy decompression
- * or recompression of the image.
- * Thanks to Guido Vollbeding for the initial design and code of this feature.
- *
- * Horizontal flipping is done in-place, using a single top-to-bottom
- * pass through the virtual source array. It will thus be much the
- * fastest option for images larger than main memory.
- *
- * The other routines require a set of destination virtual arrays, so they
- * need twice as much memory as jpegtran normally does. The destination
- * arrays are always written in normal scan order (top to bottom) because
- * the virtual array manager expects this. The source arrays will be scanned
- * in the corresponding order, which means multiple passes through the source
- * arrays for most of the transforms. That could result in much thrashing
- * if the image is larger than main memory.
- *
- * Some notes about the operating environment of the individual transform
- * routines:
- * 1. Both the source and destination virtual arrays are allocated from the
- * source JPEG object, and therefore should be manipulated by calling the
- * source's memory manager.
- * 2. The destination's component count should be used. It may be smaller
- * than the source's when forcing to grayscale.
- * 3. Likewise the destination's sampling factors should be used. When
- * forcing to grayscale the destination's sampling factors will be all 1,
- * and we may as well take that as the effective iMCU size.
- * 4. When "trim" is in effect, the destination's dimensions will be the
- * trimmed values but the source's will be untrimmed.
- * 5. All the routines assume that the source and destination buffers are
- * padded out to a full iMCU boundary. This is true, although for the
- * source buffer it is an undocumented property of jdcoefct.c.
- * Notes 2,3,4 boil down to this: generally we should use the destination's
- * dimensions and ignore the source's.
- */
-
-
-LOCAL(void)
-do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
- jvirt_barray_ptr *src_coef_arrays)
-/* Horizontal flip; done in-place, so no separate dest array is required */
-{
- JDIMENSION MCU_cols, comp_width, blk_x, blk_y;
- int ci, k, offset_y;
- JBLOCKARRAY buffer;
- JCOEFPTR ptr1, ptr2;
- JCOEF temp1, temp2;
- jpeg_component_info *compptr;
-
- /* Horizontal mirroring of DCT blocks is accomplished by swapping
- * pairs of blocks in-place. Within a DCT block, we perform horizontal
- * mirroring by changing the signs of odd-numbered columns.
- * Partial iMCUs at the right edge are left untouched.
- */
- MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
-
- for (ci = 0; ci < dstinfo->num_components; ci++) {
- compptr = dstinfo->comp_info + ci;
- comp_width = MCU_cols * compptr->h_samp_factor;
- for (blk_y = 0; blk_y < compptr->height_in_blocks;
- blk_y += compptr->v_samp_factor) {
- buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y,
- (JDIMENSION) compptr->v_samp_factor, TRUE);
- for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
- for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) {
- ptr1 = buffer[offset_y][blk_x];
- ptr2 = buffer[offset_y][comp_width - blk_x - 1];
- /* this unrolled loop doesn't need to know which row it's on... */
- for (k = 0; k < DCTSIZE2; k += 2) {
- temp1 = *ptr1; /* swap even column */
- temp2 = *ptr2;
- *ptr1++ = temp2;
- *ptr2++ = temp1;
- temp1 = *ptr1; /* swap odd column with sign change */
- temp2 = *ptr2;
- *ptr1++ = -temp2;
- *ptr2++ = -temp1;
- }
- }
- }
- }
- }
-}
-
-
-LOCAL(void)
-do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
- jvirt_barray_ptr *src_coef_arrays,
- jvirt_barray_ptr *dst_coef_arrays)
-/* Vertical flip */
-{
- JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
- int ci, i, j, offset_y;
- JBLOCKARRAY src_buffer, dst_buffer;
- JBLOCKROW src_row_ptr, dst_row_ptr;
- JCOEFPTR src_ptr, dst_ptr;
- jpeg_component_info *compptr;
-
- /* We output into a separate array because we can't touch different
- * rows of the source virtual array simultaneously. Otherwise, this
- * is a pretty straightforward analog of horizontal flip.
- * Within a DCT block, vertical mirroring is done by changing the signs
- * of odd-numbered rows.
- * Partial iMCUs at the bottom edge are copied verbatim.
- */
- MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
-
- for (ci = 0; ci < dstinfo->num_components; ci++) {
- compptr = dstinfo->comp_info + ci;
- comp_height = MCU_rows * compptr->v_samp_factor;
- for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
- dst_blk_y += compptr->v_samp_factor) {
- dst_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
- (JDIMENSION) compptr->v_samp_factor, TRUE);
- if (dst_blk_y < comp_height) {
- /* Row is within the mirrorable area. */
- src_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, src_coef_arrays[ci],
- comp_height - dst_blk_y - (JDIMENSION) compptr->v_samp_factor,
- (JDIMENSION) compptr->v_samp_factor, FALSE);
- } else {
- /* Bottom-edge blocks will be copied verbatim. */
- src_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_y,
- (JDIMENSION) compptr->v_samp_factor, FALSE);
- }
- for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
- if (dst_blk_y < comp_height) {
- /* Row is within the mirrorable area. */
- dst_row_ptr = dst_buffer[offset_y];
- src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
- for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
- dst_blk_x++) {
- dst_ptr = dst_row_ptr[dst_blk_x];
- src_ptr = src_row_ptr[dst_blk_x];
- for (i = 0; i < DCTSIZE; i += 2) {
- /* copy even row */
- for (j = 0; j < DCTSIZE; j++)
- *dst_ptr++ = *src_ptr++;
- /* copy odd row with sign change */
- for (j = 0; j < DCTSIZE; j++)
- *dst_ptr++ = - *src_ptr++;
- }
- }
- } else {
- /* Just copy row verbatim. */
- jcopy_block_row(src_buffer[offset_y], dst_buffer[offset_y],
- compptr->width_in_blocks);
- }
- }
- }
- }
-}
-
-
-LOCAL(void)
-do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
- jvirt_barray_ptr *src_coef_arrays,
- jvirt_barray_ptr *dst_coef_arrays)
-/* Transpose source into destination */
-{
- JDIMENSION dst_blk_x, dst_blk_y;
- int ci, i, j, offset_x, offset_y;
- JBLOCKARRAY src_buffer, dst_buffer;
- JCOEFPTR src_ptr, dst_ptr;
- jpeg_component_info *compptr;
-
- /* Transposing pixels within a block just requires transposing the
- * DCT coefficients.
- * Partial iMCUs at the edges require no special treatment; we simply
- * process all the available DCT blocks for every component.
- */
- for (ci = 0; ci < dstinfo->num_components; ci++) {
- compptr = dstinfo->comp_info + ci;
- for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
- dst_blk_y += compptr->v_samp_factor) {
- dst_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
- (JDIMENSION) compptr->v_samp_factor, TRUE);
- for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
- for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
- dst_blk_x += compptr->h_samp_factor) {
- src_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
- (JDIMENSION) compptr->h_samp_factor, FALSE);
- for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
- src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
- dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
- for (i = 0; i < DCTSIZE; i++)
- for (j = 0; j < DCTSIZE; j++)
- dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
- }
- }
- }
- }
- }
-}
-
-
-LOCAL(void)
-do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
- jvirt_barray_ptr *src_coef_arrays,
- jvirt_barray_ptr *dst_coef_arrays)
-/* 90 degree rotation is equivalent to
- * 1. Transposing the image;
- * 2. Horizontal mirroring.
- * These two steps are merged into a single processing routine.
- */
-{
- JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y;
- int ci, i, j, offset_x, offset_y;
- JBLOCKARRAY src_buffer, dst_buffer;
- JCOEFPTR src_ptr, dst_ptr;
- jpeg_component_info *compptr;
-
- /* Because of the horizontal mirror step, we can't process partial iMCUs
- * at the (output) right edge properly. They just get transposed and
- * not mirrored.
- */
- MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
-
- for (ci = 0; ci < dstinfo->num_components; ci++) {
- compptr = dstinfo->comp_info + ci;
- comp_width = MCU_cols * compptr->h_samp_factor;
- for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
- dst_blk_y += compptr->v_samp_factor) {
- dst_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
- (JDIMENSION) compptr->v_samp_factor, TRUE);
- for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
- for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
- dst_blk_x += compptr->h_samp_factor) {
- src_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
- (JDIMENSION) compptr->h_samp_factor, FALSE);
- for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
- src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
- if (dst_blk_x < comp_width) {
- /* Block is within the mirrorable area. */
- dst_ptr = dst_buffer[offset_y]
- [comp_width - dst_blk_x - offset_x - 1];
- for (i = 0; i < DCTSIZE; i++) {
- for (j = 0; j < DCTSIZE; j++)
- dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
- i++;
- for (j = 0; j < DCTSIZE; j++)
- dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
- }
- } else {
- /* Edge blocks are transposed but not mirrored. */
- dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
- for (i = 0; i < DCTSIZE; i++)
- for (j = 0; j < DCTSIZE; j++)
- dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
- }
- }
- }
- }
- }
- }
-}
-
-
-LOCAL(void)
-do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
- jvirt_barray_ptr *src_coef_arrays,
- jvirt_barray_ptr *dst_coef_arrays)
-/* 270 degree rotation is equivalent to
- * 1. Horizontal mirroring;
- * 2. Transposing the image.
- * These two steps are merged into a single processing routine.
- */
-{
- JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
- int ci, i, j, offset_x, offset_y;
- JBLOCKARRAY src_buffer, dst_buffer;
- JCOEFPTR src_ptr, dst_ptr;
- jpeg_component_info *compptr;
-
- /* Because of the horizontal mirror step, we can't process partial iMCUs
- * at the (output) bottom edge properly. They just get transposed and
- * not mirrored.
- */
- MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
-
- for (ci = 0; ci < dstinfo->num_components; ci++) {
- compptr = dstinfo->comp_info + ci;
- comp_height = MCU_rows * compptr->v_samp_factor;
- for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
- dst_blk_y += compptr->v_samp_factor) {
- dst_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
- (JDIMENSION) compptr->v_samp_factor, TRUE);
- for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
- for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
- dst_blk_x += compptr->h_samp_factor) {
- src_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
- (JDIMENSION) compptr->h_samp_factor, FALSE);
- for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
- dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
- if (dst_blk_y < comp_height) {
- /* Block is within the mirrorable area. */
- src_ptr = src_buffer[offset_x]
- [comp_height - dst_blk_y - offset_y - 1];
- for (i = 0; i < DCTSIZE; i++) {
- for (j = 0; j < DCTSIZE; j++) {
- dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
- j++;
- dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
- }
- }
- } else {
- /* Edge blocks are transposed but not mirrored. */
- src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
- for (i = 0; i < DCTSIZE; i++)
- for (j = 0; j < DCTSIZE; j++)
- dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
- }
- }
- }
- }
- }
- }
-}
-
-
-LOCAL(void)
-do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
- jvirt_barray_ptr *src_coef_arrays,
- jvirt_barray_ptr *dst_coef_arrays)
-/* 180 degree rotation is equivalent to
- * 1. Vertical mirroring;
- * 2. Horizontal mirroring.
- * These two steps are merged into a single processing routine.
- */
-{
- JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
- int ci, i, j, offset_y;
- JBLOCKARRAY src_buffer, dst_buffer;
- JBLOCKROW src_row_ptr, dst_row_ptr;
- JCOEFPTR src_ptr, dst_ptr;
- jpeg_component_info *compptr;
-
- MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
- MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
-
- for (ci = 0; ci < dstinfo->num_components; ci++) {
- compptr = dstinfo->comp_info + ci;
- comp_width = MCU_cols * compptr->h_samp_factor;
- comp_height = MCU_rows * compptr->v_samp_factor;
- for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
- dst_blk_y += compptr->v_samp_factor) {
- dst_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
- (JDIMENSION) compptr->v_samp_factor, TRUE);
- if (dst_blk_y < comp_height) {
- /* Row is within the vertically mirrorable area. */
- src_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, src_coef_arrays[ci],
- comp_height - dst_blk_y - (JDIMENSION) compptr->v_samp_factor,
- (JDIMENSION) compptr->v_samp_factor, FALSE);
- } else {
- /* Bottom-edge rows are only mirrored horizontally. */
- src_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_y,
- (JDIMENSION) compptr->v_samp_factor, FALSE);
- }
- for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
- if (dst_blk_y < comp_height) {
- /* Row is within the mirrorable area. */
- dst_row_ptr = dst_buffer[offset_y];
- src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
- /* Process the blocks that can be mirrored both ways. */
- for (dst_blk_x = 0; dst_blk_x < comp_width; dst_blk_x++) {
- dst_ptr = dst_row_ptr[dst_blk_x];
- src_ptr = src_row_ptr[comp_width - dst_blk_x - 1];
- for (i = 0; i < DCTSIZE; i += 2) {
- /* For even row, negate every odd column. */
- for (j = 0; j < DCTSIZE; j += 2) {
- *dst_ptr++ = *src_ptr++;
- *dst_ptr++ = - *src_ptr++;
- }
- /* For odd row, negate every even column. */
- for (j = 0; j < DCTSIZE; j += 2) {
- *dst_ptr++ = - *src_ptr++;
- *dst_ptr++ = *src_ptr++;
- }
- }
- }
- /* Any remaining right-edge blocks are only mirrored vertically. */
- for (; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
- dst_ptr = dst_row_ptr[dst_blk_x];
- src_ptr = src_row_ptr[dst_blk_x];
- for (i = 0; i < DCTSIZE; i += 2) {
- for (j = 0; j < DCTSIZE; j++)
- *dst_ptr++ = *src_ptr++;
- for (j = 0; j < DCTSIZE; j++)
- *dst_ptr++ = - *src_ptr++;
- }
- }
- } else {
- /* Remaining rows are just mirrored horizontally. */
- dst_row_ptr = dst_buffer[offset_y];
- src_row_ptr = src_buffer[offset_y];
- /* Process the blocks that can be mirrored. */
- for (dst_blk_x = 0; dst_blk_x < comp_width; dst_blk_x++) {
- dst_ptr = dst_row_ptr[dst_blk_x];
- src_ptr = src_row_ptr[comp_width - dst_blk_x - 1];
- for (i = 0; i < DCTSIZE2; i += 2) {
- *dst_ptr++ = *src_ptr++;
- *dst_ptr++ = - *src_ptr++;
- }
- }
- /* Any remaining right-edge blocks are only copied. */
- for (; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
- dst_ptr = dst_row_ptr[dst_blk_x];
- src_ptr = src_row_ptr[dst_blk_x];
- for (i = 0; i < DCTSIZE2; i++)
- *dst_ptr++ = *src_ptr++;
- }
- }
- }
- }
- }
-}
-
-
-LOCAL(void)
-do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
- jvirt_barray_ptr *src_coef_arrays,
- jvirt_barray_ptr *dst_coef_arrays)
-/* Transverse transpose is equivalent to
- * 1. 180 degree rotation;
- * 2. Transposition;
- * or
- * 1. Horizontal mirroring;
- * 2. Transposition;
- * 3. Horizontal mirroring.
- * These steps are merged into a single processing routine.
- */
-{
- JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
- int ci, i, j, offset_x, offset_y;
- JBLOCKARRAY src_buffer, dst_buffer;
- JCOEFPTR src_ptr, dst_ptr;
- jpeg_component_info *compptr;
-
- MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
- MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
-
- for (ci = 0; ci < dstinfo->num_components; ci++) {
- compptr = dstinfo->comp_info + ci;
- comp_width = MCU_cols * compptr->h_samp_factor;
- comp_height = MCU_rows * compptr->v_samp_factor;
- for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
- dst_blk_y += compptr->v_samp_factor) {
- dst_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
- (JDIMENSION) compptr->v_samp_factor, TRUE);
- for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
- for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
- dst_blk_x += compptr->h_samp_factor) {
- src_buffer = (*srcinfo->mem->access_virt_barray)
- ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
- (JDIMENSION) compptr->h_samp_factor, FALSE);
- for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
- if (dst_blk_y < comp_height) {
- src_ptr = src_buffer[offset_x]
- [comp_height - dst_blk_y - offset_y - 1];
- if (dst_blk_x < comp_width) {
- /* Block is within the mirrorable area. */
- dst_ptr = dst_buffer[offset_y]
- [comp_width - dst_blk_x - offset_x - 1];
- for (i = 0; i < DCTSIZE; i++) {
- for (j = 0; j < DCTSIZE; j++) {
- dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
- j++;
- dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
- }
- i++;
- for (j = 0; j < DCTSIZE; j++) {
- dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
- j++;
- dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
- }
- }
- } else {
- /* Right-edge blocks are mirrored in y only */
- dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
- for (i = 0; i < DCTSIZE; i++) {
- for (j = 0; j < DCTSIZE; j++) {
- dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
- j++;
- dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
- }
- }
- }
- } else {
- src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
- if (dst_blk_x < comp_width) {
- /* Bottom-edge blocks are mirrored in x only */
- dst_ptr = dst_buffer[offset_y]
- [comp_width - dst_blk_x - offset_x - 1];
- for (i = 0; i < DCTSIZE; i++) {
- for (j = 0; j < DCTSIZE; j++)
- dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
- i++;
- for (j = 0; j < DCTSIZE; j++)
- dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
- }
- } else {
- /* At lower right corner, just transpose, no mirroring */
- dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
- for (i = 0; i < DCTSIZE; i++)
- for (j = 0; j < DCTSIZE; j++)
- dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
- }
- }
- }
- }
- }
- }
- }
-}
-
-
-/* Request any required workspace.
- *
- * We allocate the workspace virtual arrays from the source decompression
- * object, so that all the arrays (both the original data and the workspace)
- * will be taken into account while making memory management decisions.
- * Hence, this routine must be called after jpeg_read_header (which reads
- * the image dimensions) and before jpeg_read_coefficients (which realizes
- * the source's virtual arrays).
- */
-
-GLOBAL(void)
-jtransform_request_workspace (j_decompress_ptr srcinfo,
- jpeg_transform_info *info)
-{
- jvirt_barray_ptr *coef_arrays = NULL;
- jpeg_component_info *compptr;
- int ci;
-
- if (info->force_grayscale &&
- srcinfo->jpeg_color_space == JCS_YCbCr &&
- srcinfo->num_components == 3) {
- /* We'll only process the first component */
- info->num_components = 1;
- } else {
- /* Process all the components */
- info->num_components = srcinfo->num_components;
- }
-
- switch (info->transform) {
- case JXFORM_NONE:
- case JXFORM_FLIP_H:
- /* Don't need a workspace array */
- break;
- case JXFORM_FLIP_V:
- case JXFORM_ROT_180:
- /* Need workspace arrays having same dimensions as source image.
- * Note that we allocate arrays padded out to the next iMCU boundary,
- * so that transform routines need not worry about missing edge blocks.
- */
- coef_arrays = (jvirt_barray_ptr *)
- (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE,
- SIZEOF(jvirt_barray_ptr) * info->num_components);
- for (ci = 0; ci < info->num_components; ci++) {
- compptr = srcinfo->comp_info + ci;
- coef_arrays[ci] = (*srcinfo->mem->request_virt_barray)
- ((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE,
- (JDIMENSION) jround_up((long) compptr->width_in_blocks,
- (long) compptr->h_samp_factor),
- (JDIMENSION) jround_up((long) compptr->height_in_blocks,
- (long) compptr->v_samp_factor),
- (JDIMENSION) compptr->v_samp_factor);
- }
- break;
- case JXFORM_TRANSPOSE:
- case JXFORM_TRANSVERSE:
- case JXFORM_ROT_90:
- case JXFORM_ROT_270:
- /* Need workspace arrays having transposed dimensions.
- * Note that we allocate arrays padded out to the next iMCU boundary,
- * so that transform routines need not worry about missing edge blocks.
- */
- coef_arrays = (jvirt_barray_ptr *)
- (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE,
- SIZEOF(jvirt_barray_ptr) * info->num_components);
- for (ci = 0; ci < info->num_components; ci++) {
- compptr = srcinfo->comp_info + ci;
- coef_arrays[ci] = (*srcinfo->mem->request_virt_barray)
- ((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE,
- (JDIMENSION) jround_up((long) compptr->height_in_blocks,
- (long) compptr->v_samp_factor),
- (JDIMENSION) jround_up((long) compptr->width_in_blocks,
- (long) compptr->h_samp_factor),
- (JDIMENSION) compptr->h_samp_factor);
- }
- break;
- }
- info->workspace_coef_arrays = coef_arrays;
-}
-
-
-/* Transpose destination image parameters */
-
-LOCAL(void)
-transpose_critical_parameters (j_compress_ptr dstinfo)
-{
- int tblno, i, j, ci, itemp;
- jpeg_component_info *compptr;
- JQUANT_TBL *qtblptr;
- JDIMENSION dtemp;
- UINT16 qtemp;
-
- /* Transpose basic image dimensions */
- dtemp = dstinfo->image_width;
- dstinfo->image_width = dstinfo->image_height;
- dstinfo->image_height = dtemp;
-
- /* Transpose sampling factors */
- for (ci = 0; ci < dstinfo->num_components; ci++) {
- compptr = dstinfo->comp_info + ci;
- itemp = compptr->h_samp_factor;
- compptr->h_samp_factor = compptr->v_samp_factor;
- compptr->v_samp_factor = itemp;
- }
-
- /* Transpose quantization tables */
- for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) {
- qtblptr = dstinfo->quant_tbl_ptrs[tblno];
- if (qtblptr != NULL) {
- for (i = 0; i < DCTSIZE; i++) {
- for (j = 0; j < i; j++) {
- qtemp = qtblptr->quantval[i*DCTSIZE+j];
- qtblptr->quantval[i*DCTSIZE+j] = qtblptr->quantval[j*DCTSIZE+i];
- qtblptr->quantval[j*DCTSIZE+i] = qtemp;
- }
- }
- }
- }
-}
-
-
-/* Trim off any partial iMCUs on the indicated destination edge */
-
-LOCAL(void)
-trim_right_edge (j_compress_ptr dstinfo)
-{
- int ci, max_h_samp_factor;
- JDIMENSION MCU_cols;
-
- /* We have to compute max_h_samp_factor ourselves,
- * because it hasn't been set yet in the destination
- * (and we don't want to use the source's value).
- */
- max_h_samp_factor = 1;
- for (ci = 0; ci < dstinfo->num_components; ci++) {
- int h_samp_factor = dstinfo->comp_info[ci].h_samp_factor;
- max_h_samp_factor = MAX(max_h_samp_factor, h_samp_factor);
- }
- MCU_cols = dstinfo->image_width / (max_h_samp_factor * DCTSIZE);
- if (MCU_cols > 0) /* can't trim to 0 pixels */
- dstinfo->image_width = MCU_cols * (max_h_samp_factor * DCTSIZE);
-}
-
-LOCAL(void)
-trim_bottom_edge (j_compress_ptr dstinfo)
-{
- int ci, max_v_samp_factor;
- JDIMENSION MCU_rows;
-
- /* We have to compute max_v_samp_factor ourselves,
- * because it hasn't been set yet in the destination
- * (and we don't want to use the source's value).
- */
- max_v_samp_factor = 1;
- for (ci = 0; ci < dstinfo->num_components; ci++) {
- int v_samp_factor = dstinfo->comp_info[ci].v_samp_factor;
- max_v_samp_factor = MAX(max_v_samp_factor, v_samp_factor);
- }
- MCU_rows = dstinfo->image_height / (max_v_samp_factor * DCTSIZE);
- if (MCU_rows > 0) /* can't trim to 0 pixels */
- dstinfo->image_height = MCU_rows * (max_v_samp_factor * DCTSIZE);
-}
-
-
-/* Adjust output image parameters as needed.
- *
- * This must be called after jpeg_copy_critical_parameters()
- * and before jpeg_write_coefficients().
- *
- * The return value is the set of virtual coefficient arrays to be written
- * (either the ones allocated by jtransform_request_workspace, or the
- * original source data arrays). The caller will need to pass this value
- * to jpeg_write_coefficients().
- */
-
-GLOBAL(jvirt_barray_ptr *)
-jtransform_adjust_parameters (j_decompress_ptr srcinfo,
- j_compress_ptr dstinfo,
- jvirt_barray_ptr *src_coef_arrays,
- jpeg_transform_info *info)
-{
- /* If force-to-grayscale is requested, adjust destination parameters */
- if (info->force_grayscale) {
- /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed
- * properly. Among other things, the target h_samp_factor & v_samp_factor
- * will get set to 1, which typically won't match the source.
- * In fact we do this even if the source is already grayscale; that
- * provides an easy way of coercing a grayscale JPEG with funny sampling
- * factors to the customary 1,1. (Some decoders fail on other factors.)
- */
- if ((dstinfo->jpeg_color_space == JCS_YCbCr &&
- dstinfo->num_components == 3) ||
- (dstinfo->jpeg_color_space == JCS_GRAYSCALE &&
- dstinfo->num_components == 1)) {
- /* We have to preserve the source's quantization table number. */
- int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no;
- jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE);
- dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no;
- } else {
- /* Sorry, can't do it */
- ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL);
- }
- }
-
- /* Correct the destination's image dimensions etc if necessary */
- switch (info->transform) {
- case JXFORM_NONE:
- /* Nothing to do */
- break;
- case JXFORM_FLIP_H:
- if (info->trim)
- trim_right_edge(dstinfo);
- break;
- case JXFORM_FLIP_V:
- if (info->trim)
- trim_bottom_edge(dstinfo);
- break;
- case JXFORM_TRANSPOSE:
- transpose_critical_parameters(dstinfo);
- /* transpose does NOT have to trim anything */
- break;
- case JXFORM_TRANSVERSE:
- transpose_critical_parameters(dstinfo);
- if (info->trim) {
- trim_right_edge(dstinfo);
- trim_bottom_edge(dstinfo);
- }
- break;
- case JXFORM_ROT_90:
- transpose_critical_parameters(dstinfo);
- if (info->trim)
- trim_right_edge(dstinfo);
- break;
- case JXFORM_ROT_180:
- if (info->trim) {
- trim_right_edge(dstinfo);
- trim_bottom_edge(dstinfo);
- }
- break;
- case JXFORM_ROT_270:
- transpose_critical_parameters(dstinfo);
- if (info->trim)
- trim_bottom_edge(dstinfo);
- break;
- }
-
- /* Return the appropriate output data set */
- if (info->workspace_coef_arrays != NULL)
- return info->workspace_coef_arrays;
- return src_coef_arrays;
-}
-
-
-/* Execute the actual transformation, if any.
- *
- * This must be called *after* jpeg_write_coefficients, because it depends
- * on jpeg_write_coefficients to have computed subsidiary values such as
- * the per-component width and height fields in the destination object.
- *
- * Note that some transformations will modify the source data arrays!
- */
-
-GLOBAL(void)
-jtransform_execute_transformation (j_decompress_ptr srcinfo,
- j_compress_ptr dstinfo,
- jvirt_barray_ptr *src_coef_arrays,
- jpeg_transform_info *info)
-{
- jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays;
-
- switch (info->transform) {
- case JXFORM_NONE:
- break;
- case JXFORM_FLIP_H:
- do_flip_h(srcinfo, dstinfo, src_coef_arrays);
- break;
- case JXFORM_FLIP_V:
- do_flip_v(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
- break;
- case JXFORM_TRANSPOSE:
- do_transpose(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
- break;
- case JXFORM_TRANSVERSE:
- do_transverse(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
- break;
- case JXFORM_ROT_90:
- do_rot_90(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
- break;
- case JXFORM_ROT_180:
- do_rot_180(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
- break;
- case JXFORM_ROT_270:
- do_rot_270(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
- break;
- }
-}
-
-#endif /* TRANSFORMS_SUPPORTED */
-
-
-/* Setup decompression object to save desired markers in memory.
- * This must be called before jpeg_read_header() to have the desired effect.
- */
-
-GLOBAL(void)
-jcopy_markers_setup (j_decompress_ptr srcinfo, JCOPY_OPTION option)
-{
-#ifdef SAVE_MARKERS_SUPPORTED
- int m;
-
- /* Save comments except under NONE option */
- if (option != JCOPYOPT_NONE) {
- jpeg_save_markers(srcinfo, JPEG_COM, 0xFFFF);
- }
- /* Save all types of APPn markers iff ALL option */
- if (option == JCOPYOPT_ALL) {
- for (m = 0; m < 16; m++)
- jpeg_save_markers(srcinfo, JPEG_APP0 + m, 0xFFFF);
- }
-#endif /* SAVE_MARKERS_SUPPORTED */
-}
-
-/* Copy markers saved in the given source object to the destination object.
- * This should be called just after jpeg_start_compress() or
- * jpeg_write_coefficients().
- * Note that those routines will have written the SOI, and also the
- * JFIF APP0 or Adobe APP14 markers if selected.
- */
-
-GLOBAL(void)
-jcopy_markers_execute (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
- JCOPY_OPTION option)
-{
- jpeg_saved_marker_ptr marker;
-
- /* In the current implementation, we don't actually need to examine the
- * option flag here; we just copy everything that got saved.
- * But to avoid confusion, we do not output JFIF and Adobe APP14 markers
- * if the encoder library already wrote one.
- */
- for (marker = srcinfo->marker_list; marker != NULL; marker = marker->next) {
- if (dstinfo->write_JFIF_header &&
- marker->marker == JPEG_APP0 &&
- marker->data_length >= 5 &&
- GETJOCTET(marker->data[0]) == 0x4A &&
- GETJOCTET(marker->data[1]) == 0x46 &&
- GETJOCTET(marker->data[2]) == 0x49 &&
- GETJOCTET(marker->data[3]) == 0x46 &&
- GETJOCTET(marker->data[4]) == 0)
- continue; /* reject duplicate JFIF */
- if (dstinfo->write_Adobe_marker &&
- marker->marker == JPEG_APP0+14 &&
- marker->data_length >= 5 &&
- GETJOCTET(marker->data[0]) == 0x41 &&
- GETJOCTET(marker->data[1]) == 0x64 &&
- GETJOCTET(marker->data[2]) == 0x6F &&
- GETJOCTET(marker->data[3]) == 0x62 &&
- GETJOCTET(marker->data[4]) == 0x65)
- continue; /* reject duplicate Adobe */
-#ifdef NEED_FAR_POINTERS
- /* We could use jpeg_write_marker if the data weren't FAR... */
- {
- unsigned int i;
- jpeg_write_m_header(dstinfo, marker->marker, marker->data_length);
- for (i = 0; i < marker->data_length; i++)
- jpeg_write_m_byte(dstinfo, marker->data[i]);
- }
-#else
- jpeg_write_marker(dstinfo, marker->marker,
- marker->data, marker->data_length);
-#endif
- }
-}
diff --git a/libjpegtwrp/transupp.h b/libjpegtwrp/transupp.h
deleted file mode 100644
index 5c2d32aff..000000000
--- a/libjpegtwrp/transupp.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * transupp.h
- *
- * Copyright (C) 1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains declarations for image transformation routines and
- * other utility code used by the jpegtran sample application. These are
- * NOT part of the core JPEG library. But we keep these routines separate
- * from jpegtran.c to ease the task of maintaining jpegtran-like programs
- * that have other user interfaces.
- *
- * NOTE: all the routines declared here have very specific requirements
- * about when they are to be executed during the reading and writing of the
- * source and destination files. See the comments in transupp.c, or see
- * jpegtran.c for an example of correct usage.
- */
-
-/* If you happen not to want the image transform support, disable it here */
-#ifndef TRANSFORMS_SUPPORTED
-#define TRANSFORMS_SUPPORTED 1 /* 0 disables transform code */
-#endif
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jtransform_request_workspace jTrRequest
-#define jtransform_adjust_parameters jTrAdjust
-#define jtransform_execute_transformation jTrExec
-#define jcopy_markers_setup jCMrkSetup
-#define jcopy_markers_execute jCMrkExec
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-
-/*
- * Codes for supported types of image transformations.
- */
-
-typedef enum {
- JXFORM_NONE, /* no transformation */
- JXFORM_FLIP_H, /* horizontal flip */
- JXFORM_FLIP_V, /* vertical flip */
- JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */
- JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */
- JXFORM_ROT_90, /* 90-degree clockwise rotation */
- JXFORM_ROT_180, /* 180-degree rotation */
- JXFORM_ROT_270 /* 270-degree clockwise (or 90 ccw) */
-} JXFORM_CODE;
-
-/*
- * Although rotating and flipping data expressed as DCT coefficients is not
- * hard, there is an asymmetry in the JPEG format specification for images
- * whose dimensions aren't multiples of the iMCU size. The right and bottom
- * image edges are padded out to the next iMCU boundary with junk data; but
- * no padding is possible at the top and left edges. If we were to flip
- * the whole image including the pad data, then pad garbage would become
- * visible at the top and/or left, and real pixels would disappear into the
- * pad margins --- perhaps permanently, since encoders & decoders may not
- * bother to preserve DCT blocks that appear to be completely outside the
- * nominal image area. So, we have to exclude any partial iMCUs from the
- * basic transformation.
- *
- * Transpose is the only transformation that can handle partial iMCUs at the
- * right and bottom edges completely cleanly. flip_h can flip partial iMCUs
- * at the bottom, but leaves any partial iMCUs at the right edge untouched.
- * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched.
- * The other transforms are defined as combinations of these basic transforms
- * and process edge blocks in a way that preserves the equivalence.
- *
- * The "trim" option causes untransformable partial iMCUs to be dropped;
- * this is not strictly lossless, but it usually gives the best-looking
- * result for odd-size images. Note that when this option is active,
- * the expected mathematical equivalences between the transforms may not hold.
- * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim
- * followed by -rot 180 -trim trims both edges.)
- *
- * We also offer a "force to grayscale" option, which simply discards the
- * chrominance channels of a YCbCr image. This is lossless in the sense that
- * the luminance channel is preserved exactly. It's not the same kind of
- * thing as the rotate/flip transformations, but it's convenient to handle it
- * as part of this package, mainly because the transformation routines have to
- * be aware of the option to know how many components to work on.
- */
-
-typedef struct {
- /* Options: set by caller */
- JXFORM_CODE transform; /* image transform operator */
- boolean trim; /* if TRUE, trim partial MCUs as needed */
- boolean force_grayscale; /* if TRUE, convert color image to grayscale */
-
- /* Internal workspace: caller should not touch these */
- int num_components; /* # of components in workspace */
- jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */
-} jpeg_transform_info;
-
-
-#if TRANSFORMS_SUPPORTED
-
-/* Request any required workspace */
-EXTERN(void) jtransform_request_workspace
- JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info));
-/* Adjust output image parameters */
-EXTERN(jvirt_barray_ptr *) jtransform_adjust_parameters
- JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
- jvirt_barray_ptr *src_coef_arrays,
- jpeg_transform_info *info));
-/* Execute the actual transformation, if any */
-EXTERN(void) jtransform_execute_transformation
- JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
- jvirt_barray_ptr *src_coef_arrays,
- jpeg_transform_info *info));
-
-#endif /* TRANSFORMS_SUPPORTED */
-
-
-/*
- * Support for copying optional markers from source to destination file.
- */
-
-typedef enum {
- JCOPYOPT_NONE, /* copy no optional markers */
- JCOPYOPT_COMMENTS, /* copy only comment (COM) markers */
- JCOPYOPT_ALL /* copy all optional markers */
-} JCOPY_OPTION;
-
-#define JCOPYOPT_DEFAULT JCOPYOPT_COMMENTS /* recommended default */
-
-/* Setup decompression object to save desired markers in memory */
-EXTERN(void) jcopy_markers_setup
- JPP((j_decompress_ptr srcinfo, JCOPY_OPTION option));
-/* Copy markers saved in the given source object to the destination object */
-EXTERN(void) jcopy_markers_execute
- JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
- JCOPY_OPTION option));
diff --git a/libjpegtwrp/usage.doc b/libjpegtwrp/usage.doc
deleted file mode 100644
index 8c4970af0..000000000
--- a/libjpegtwrp/usage.doc
+++ /dev/null
@@ -1,562 +0,0 @@
-USAGE instructions for the Independent JPEG Group's JPEG software
-=================================================================
-
-This file describes usage of the JPEG conversion programs cjpeg and djpeg,
-as well as the utility programs jpegtran, rdjpgcom and wrjpgcom. (See
-the other documentation files if you wish to use the JPEG library within
-your own programs.)
-
-If you are on a Unix machine you may prefer to read the Unix-style manual
-pages in files cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1.
-
-
-INTRODUCTION
-
-These programs implement JPEG image compression and decompression. JPEG
-(pronounced "jay-peg") is a standardized compression method for full-color
-and gray-scale images. JPEG is designed to handle "real-world" scenes,
-for example scanned photographs. Cartoons, line drawings, and other
-non-realistic images are not JPEG's strong suit; on that sort of material
-you may get poor image quality and/or little compression.
-
-JPEG is lossy, meaning that the output image is not necessarily identical to
-the input image. Hence you should not use JPEG if you have to have identical
-output bits. However, on typical real-world images, very good compression
-levels can be obtained with no visible change, and amazingly high compression
-is possible if you can tolerate a low-quality image. You can trade off image
-quality against file size by adjusting the compressor's "quality" setting.
-
-
-GENERAL USAGE
-
-We provide two programs, cjpeg to compress an image file into JPEG format,
-and djpeg to decompress a JPEG file back into a conventional image format.
-
-On Unix-like systems, you say:
- cjpeg [switches] [imagefile] >jpegfile
-or
- djpeg [switches] [jpegfile] >imagefile
-The programs read the specified input file, or standard input if none is
-named. They always write to standard output (with trace/error messages to
-standard error). These conventions are handy for piping images between
-programs.
-
-On most non-Unix systems, you say:
- cjpeg [switches] imagefile jpegfile
-or
- djpeg [switches] jpegfile imagefile
-i.e., both the input and output files are named on the command line. This
-style is a little more foolproof, and it loses no functionality if you don't
-have pipes. (You can get this style on Unix too, if you prefer, by defining
-TWO_FILE_COMMANDLINE when you compile the programs; see install.doc.)
-
-You can also say:
- cjpeg [switches] -outfile jpegfile imagefile
-or
- djpeg [switches] -outfile imagefile jpegfile
-This syntax works on all systems, so it is useful for scripts.
-
-The currently supported image file formats are: PPM (PBMPLUS color format),
-PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster Toolkit
-format). (RLE is supported only if the URT library is available.)
-cjpeg recognizes the input image format automatically, with the exception
-of some Targa-format files. You have to tell djpeg which format to generate.
-
-JPEG files are in the defacto standard JFIF file format. There are other,
-less widely used JPEG-based file formats, but we don't support them.
-
-All switch names may be abbreviated; for example, -grayscale may be written
--gray or -gr. Most of the "basic" switches can be abbreviated to as little as
-one letter. Upper and lower case are equivalent (-BMP is the same as -bmp).
-British spellings are also accepted (e.g., -greyscale), though for brevity
-these are not mentioned below.
-
-
-CJPEG DETAILS
-
-The basic command line switches for cjpeg are:
-
- -quality N Scale quantization tables to adjust image quality.
- Quality is 0 (worst) to 100 (best); default is 75.
- (See below for more info.)
-
- -grayscale Create monochrome JPEG file from color input.
- Be sure to use this switch when compressing a grayscale
- BMP file, because cjpeg isn't bright enough to notice
- whether a BMP file uses only shades of gray. By
- saying -grayscale, you'll get a smaller JPEG file that
- takes less time to process.
-
- -optimize Perform optimization of entropy encoding parameters.
- Without this, default encoding parameters are used.
- -optimize usually makes the JPEG file a little smaller,
- but cjpeg runs somewhat slower and needs much more
- memory. Image quality and speed of decompression are
- unaffected by -optimize.
-
- -progressive Create progressive JPEG file (see below).
-
- -targa Input file is Targa format. Targa files that contain
- an "identification" field will not be automatically
- recognized by cjpeg; for such files you must specify
- -targa to make cjpeg treat the input as Targa format.
- For most Targa files, you won't need this switch.
-
-The -quality switch lets you trade off compressed file size against quality of
-the reconstructed image: the higher the quality setting, the larger the JPEG
-file, and the closer the output image will be to the original input. Normally
-you want to use the lowest quality setting (smallest file) that decompresses
-into something visually indistinguishable from the original image. For this
-purpose the quality setting should be between 50 and 95; the default of 75 is
-often about right. If you see defects at -quality 75, then go up 5 or 10
-counts at a time until you are happy with the output image. (The optimal
-setting will vary from one image to another.)
-
--quality 100 will generate a quantization table of all 1's, minimizing loss
-in the quantization step (but there is still information loss in subsampling,
-as well as roundoff error). This setting is mainly of interest for
-experimental purposes. Quality values above about 95 are NOT recommended for
-normal use; the compressed file size goes up dramatically for hardly any gain
-in output image quality.
-
-In the other direction, quality values below 50 will produce very small files
-of low image quality. Settings around 5 to 10 might be useful in preparing an
-index of a large image library, for example. Try -quality 2 (or so) for some
-amusing Cubist effects. (Note: quality values below about 25 generate 2-byte
-quantization tables, which are considered optional in the JPEG standard.
-cjpeg emits a warning message when you give such a quality value, because some
-other JPEG programs may be unable to decode the resulting file. Use -baseline
-if you need to ensure compatibility at low quality values.)
-
-The -progressive switch creates a "progressive JPEG" file. In this type of
-JPEG file, the data is stored in multiple scans of increasing quality. If the
-file is being transmitted over a slow communications link, the decoder can use
-the first scan to display a low-quality image very quickly, and can then
-improve the display with each subsequent scan. The final image is exactly
-equivalent to a standard JPEG file of the same quality setting, and the total
-file size is about the same --- often a little smaller. CAUTION: progressive
-JPEG is not yet widely implemented, so many decoders will be unable to view a
-progressive JPEG file at all.
-
-Switches for advanced users:
-
- -dct int Use integer DCT method (default).
- -dct fast Use fast integer DCT (less accurate).
- -dct float Use floating-point DCT method.
- The float method is very slightly more accurate than
- the int method, but is much slower unless your machine
- has very fast floating-point hardware. Also note that
- results of the floating-point method may vary slightly
- across machines, while the integer methods should give
- the same results everywhere. The fast integer method
- is much less accurate than the other two.
-
- -restart N Emit a JPEG restart marker every N MCU rows, or every
- N MCU blocks if "B" is attached to the number.
- -restart 0 (the default) means no restart markers.
-
- -smooth N Smooth the input image to eliminate dithering noise.
- N, ranging from 1 to 100, indicates the strength of
- smoothing. 0 (the default) means no smoothing.
-
- -maxmemory N Set limit for amount of memory to use in processing
- large images. Value is in thousands of bytes, or
- millions of bytes if "M" is attached to the number.
- For example, -max 4m selects 4000000 bytes. If more
- space is needed, temporary files will be used.
-
- -verbose Enable debug printout. More -v's give more printout.
- or -debug Also, version information is printed at startup.
-
-The -restart option inserts extra markers that allow a JPEG decoder to
-resynchronize after a transmission error. Without restart markers, any damage
-to a compressed file will usually ruin the image from the point of the error
-to the end of the image; with restart markers, the damage is usually confined
-to the portion of the image up to the next restart marker. Of course, the
-restart markers occupy extra space. We recommend -restart 1 for images that
-will be transmitted across unreliable networks such as Usenet.
-
-The -smooth option filters the input to eliminate fine-scale noise. This is
-often useful when converting dithered images to JPEG: a moderate smoothing
-factor of 10 to 50 gets rid of dithering patterns in the input file, resulting
-in a smaller JPEG file and a better-looking image. Too large a smoothing
-factor will visibly blur the image, however.
-
-Switches for wizards:
-
- -baseline Force baseline-compatible quantization tables to be
- generated. This clamps quantization values to 8 bits
- even at low quality settings. (This switch is poorly
- named, since it does not ensure that the output is
- actually baseline JPEG. For example, you can use
- -baseline and -progressive together.)
-
- -qtables file Use the quantization tables given in the specified
- text file.
-
- -qslots N[,...] Select which quantization table to use for each color
- component.
-
- -sample HxV[,...] Set JPEG sampling factors for each color component.
-
- -scans file Use the scan script given in the specified text file.
-
-The "wizard" switches are intended for experimentation with JPEG. If you
-don't know what you are doing, DON'T USE THEM. These switches are documented
-further in the file wizard.doc.
-
-
-DJPEG DETAILS
-
-The basic command line switches for djpeg are:
-
- -colors N Reduce image to at most N colors. This reduces the
- or -quantize N number of colors used in the output image, so that it
- can be displayed on a colormapped display or stored in
- a colormapped file format. For example, if you have
- an 8-bit display, you'd need to reduce to 256 or fewer
- colors. (-colors is the recommended name, -quantize
- is provided only for backwards compatibility.)
-
- -fast Select recommended processing options for fast, low
- quality output. (The default options are chosen for
- highest quality output.) Currently, this is equivalent
- to "-dct fast -nosmooth -onepass -dither ordered".
-
- -grayscale Force gray-scale output even if JPEG file is color.
- Useful for viewing on monochrome displays; also,
- djpeg runs noticeably faster in this mode.
-
- -scale M/N Scale the output image by a factor M/N. Currently
- the scale factor must be 1/1, 1/2, 1/4, or 1/8.
- Scaling is handy if the image is larger than your
- screen; also, djpeg runs much faster when scaling
- down the output.
-
- -bmp Select BMP output format (Windows flavor). 8-bit
- colormapped format is emitted if -colors or -grayscale
- is specified, or if the JPEG file is gray-scale;
- otherwise, 24-bit full-color format is emitted.
-
- -gif Select GIF output format. Since GIF does not support
- more than 256 colors, -colors 256 is assumed (unless
- you specify a smaller number of colors). If you
- specify -fast, the default number of colors is 216.
-
- -os2 Select BMP output format (OS/2 1.x flavor). 8-bit
- colormapped format is emitted if -colors or -grayscale
- is specified, or if the JPEG file is gray-scale;
- otherwise, 24-bit full-color format is emitted.
-
- -pnm Select PBMPLUS (PPM/PGM) output format (this is the
- default format). PGM is emitted if the JPEG file is
- gray-scale or if -grayscale is specified; otherwise
- PPM is emitted.
-
- -rle Select RLE output format. (Requires URT library.)
-
- -targa Select Targa output format. Gray-scale format is
- emitted if the JPEG file is gray-scale or if
- -grayscale is specified; otherwise, colormapped format
- is emitted if -colors is specified; otherwise, 24-bit
- full-color format is emitted.
-
-Switches for advanced users:
-
- -dct int Use integer DCT method (default).
- -dct fast Use fast integer DCT (less accurate).
- -dct float Use floating-point DCT method.
- The float method is very slightly more accurate than
- the int method, but is much slower unless your machine
- has very fast floating-point hardware. Also note that
- results of the floating-point method may vary slightly
- across machines, while the integer methods should give
- the same results everywhere. The fast integer method
- is much less accurate than the other two.
-
- -dither fs Use Floyd-Steinberg dithering in color quantization.
- -dither ordered Use ordered dithering in color quantization.
- -dither none Do not use dithering in color quantization.
- By default, Floyd-Steinberg dithering is applied when
- quantizing colors; this is slow but usually produces
- the best results. Ordered dither is a compromise
- between speed and quality; no dithering is fast but
- usually looks awful. Note that these switches have
- no effect unless color quantization is being done.
- Ordered dither is only available in -onepass mode.
-
- -map FILE Quantize to the colors used in the specified image
- file. This is useful for producing multiple files
- with identical color maps, or for forcing a predefined
- set of colors to be used. The FILE must be a GIF
- or PPM file. This option overrides -colors and
- -onepass.
-
- -nosmooth Use a faster, lower-quality upsampling routine.
-
- -onepass Use one-pass instead of two-pass color quantization.
- The one-pass method is faster and needs less memory,
- but it produces a lower-quality image. -onepass is
- ignored unless you also say -colors N. Also,
- the one-pass method is always used for gray-scale
- output (the two-pass method is no improvement then).
-
- -maxmemory N Set limit for amount of memory to use in processing
- large images. Value is in thousands of bytes, or
- millions of bytes if "M" is attached to the number.
- For example, -max 4m selects 4000000 bytes. If more
- space is needed, temporary files will be used.
-
- -verbose Enable debug printout. More -v's give more printout.
- or -debug Also, version information is printed at startup.
-
-
-HINTS FOR CJPEG
-
-Color GIF files are not the ideal input for JPEG; JPEG is really intended for
-compressing full-color (24-bit) images. In particular, don't try to convert
-cartoons, line drawings, and other images that have only a few distinct
-colors. GIF works great on these, JPEG does not. If you want to convert a
-GIF to JPEG, you should experiment with cjpeg's -quality and -smooth options
-to get a satisfactory conversion. -smooth 10 or so is often helpful.
-
-Avoid running an image through a series of JPEG compression/decompression
-cycles. Image quality loss will accumulate; after ten or so cycles the image
-may be noticeably worse than it was after one cycle. It's best to use a
-lossless format while manipulating an image, then convert to JPEG format when
-you are ready to file the image away.
-
-The -optimize option to cjpeg is worth using when you are making a "final"
-version for posting or archiving. It's also a win when you are using low
-quality settings to make very small JPEG files; the percentage improvement
-is often a lot more than it is on larger files. (At present, -optimize
-mode is always selected when generating progressive JPEG files.)
-
-GIF input files are no longer supported, to avoid the Unisys LZW patent.
-Use a Unisys-licensed program if you need to read a GIF file. (Conversion
-of GIF files to JPEG is usually a bad idea anyway.)
-
-
-HINTS FOR DJPEG
-
-To get a quick preview of an image, use the -grayscale and/or -scale switches.
-"-grayscale -scale 1/8" is the fastest case.
-
-Several options are available that trade off image quality to gain speed.
-"-fast" turns on the recommended settings.
-
-"-dct fast" and/or "-nosmooth" gain speed at a small sacrifice in quality.
-When producing a color-quantized image, "-onepass -dither ordered" is fast but
-much lower quality than the default behavior. "-dither none" may give
-acceptable results in two-pass mode, but is seldom tolerable in one-pass mode.
-
-If you are fortunate enough to have very fast floating point hardware,
-"-dct float" may be even faster than "-dct fast". But on most machines
-"-dct float" is slower than "-dct int"; in this case it is not worth using,
-because its theoretical accuracy advantage is too small to be significant
-in practice.
-
-Two-pass color quantization requires a good deal of memory; on MS-DOS machines
-it may run out of memory even with -maxmemory 0. In that case you can still
-decompress, with some loss of image quality, by specifying -onepass for
-one-pass quantization.
-
-To avoid the Unisys LZW patent, djpeg produces uncompressed GIF files. These
-are larger than they should be, but are readable by standard GIF decoders.
-
-
-HINTS FOR BOTH PROGRAMS
-
-If more space is needed than will fit in the available main memory (as
-determined by -maxmemory), temporary files will be used. (MS-DOS versions
-will try to get extended or expanded memory first.) The temporary files are
-often rather large: in typical cases they occupy three bytes per pixel, for
-example 3*800*600 = 1.44Mb for an 800x600 image. If you don't have enough
-free disk space, leave out -progressive and -optimize (for cjpeg) or specify
--onepass (for djpeg).
-
-On MS-DOS, the temporary files are created in the directory named by the TMP
-or TEMP environment variable, or in the current directory if neither of those
-exist. Amiga implementations put the temp files in the directory named by
-JPEGTMP:, so be sure to assign JPEGTMP: to a disk partition with adequate free
-space.
-
-The default memory usage limit (-maxmemory) is set when the software is
-compiled. If you get an "insufficient memory" error, try specifying a smaller
--maxmemory value, even -maxmemory 0 to use the absolute minimum space. You
-may want to recompile with a smaller default value if this happens often.
-
-On machines that have "environment" variables, you can define the environment
-variable JPEGMEM to set the default memory limit. The value is specified as
-described for the -maxmemory switch. JPEGMEM overrides the default value
-specified when the program was compiled, and itself is overridden by an
-explicit -maxmemory switch.
-
-On MS-DOS machines, -maxmemory is the amount of main (conventional) memory to
-use. (Extended or expanded memory is also used if available.) Most
-DOS-specific versions of this software do their own memory space estimation
-and do not need you to specify -maxmemory.
-
-
-JPEGTRAN
-
-jpegtran performs various useful transformations of JPEG files.
-It can translate the coded representation from one variant of JPEG to another,
-for example from baseline JPEG to progressive JPEG or vice versa. It can also
-perform some rearrangements of the image data, for example turning an image
-from landscape to portrait format by rotation.
-
-jpegtran works by rearranging the compressed data (DCT coefficients), without
-ever fully decoding the image. Therefore, its transformations are lossless:
-there is no image degradation at all, which would not be true if you used
-djpeg followed by cjpeg to accomplish the same conversion. But by the same
-token, jpegtran cannot perform lossy operations such as changing the image
-quality.
-
-jpegtran uses a command line syntax similar to cjpeg or djpeg.
-On Unix-like systems, you say:
- jpegtran [switches] [inputfile] >outputfile
-On most non-Unix systems, you say:
- jpegtran [switches] inputfile outputfile
-where both the input and output files are JPEG files.
-
-To specify the coded JPEG representation used in the output file,
-jpegtran accepts a subset of the switches recognized by cjpeg:
- -optimize Perform optimization of entropy encoding parameters.
- -progressive Create progressive JPEG file.
- -restart N Emit a JPEG restart marker every N MCU rows, or every
- N MCU blocks if "B" is attached to the number.
- -scans file Use the scan script given in the specified text file.
-See the previous discussion of cjpeg for more details about these switches.
-If you specify none of these switches, you get a plain baseline-JPEG output
-file. The quality setting and so forth are determined by the input file.
-
-The image can be losslessly transformed by giving one of these switches:
- -flip horizontal Mirror image horizontally (left-right).
- -flip vertical Mirror image vertically (top-bottom).
- -rotate 90 Rotate image 90 degrees clockwise.
- -rotate 180 Rotate image 180 degrees.
- -rotate 270 Rotate image 270 degrees clockwise (or 90 ccw).
- -transpose Transpose image (across UL-to-LR axis).
- -transverse Transverse transpose (across UR-to-LL axis).
-
-The transpose transformation has no restrictions regarding image dimensions.
-The other transformations operate rather oddly if the image dimensions are not
-a multiple of the iMCU size (usually 8 or 16 pixels), because they can only
-transform complete blocks of DCT coefficient data in the desired way.
-
-jpegtran's default behavior when transforming an odd-size image is designed
-to preserve exact reversibility and mathematical consistency of the
-transformation set. As stated, transpose is able to flip the entire image
-area. Horizontal mirroring leaves any partial iMCU column at the right edge
-untouched, but is able to flip all rows of the image. Similarly, vertical
-mirroring leaves any partial iMCU row at the bottom edge untouched, but is
-able to flip all columns. The other transforms can be built up as sequences
-of transpose and flip operations; for consistency, their actions on edge
-pixels are defined to be the same as the end result of the corresponding
-transpose-and-flip sequence.
-
-For practical use, you may prefer to discard any untransformable edge pixels
-rather than having a strange-looking strip along the right and/or bottom edges
-of a transformed image. To do this, add the -trim switch:
- -trim Drop non-transformable edge blocks.
-Obviously, a transformation with -trim is not reversible, so strictly speaking
-jpegtran with this switch is not lossless. Also, the expected mathematical
-equivalences between the transformations no longer hold. For example,
-"-rot 270 -trim" trims only the bottom edge, but "-rot 90 -trim" followed by
-"-rot 180 -trim" trims both edges.
-
-Another not-strictly-lossless transformation switch is:
- -grayscale Force grayscale output.
-This option discards the chrominance channels if the input image is YCbCr
-(ie, a standard color JPEG), resulting in a grayscale JPEG file. The
-luminance channel is preserved exactly, so this is a better method of reducing
-to grayscale than decompression, conversion, and recompression. This switch
-is particularly handy for fixing a monochrome picture that was mistakenly
-encoded as a color JPEG. (In such a case, the space savings from getting rid
-of the near-empty chroma channels won't be large; but the decoding time for
-a grayscale JPEG is substantially less than that for a color JPEG.)
-
-jpegtran also recognizes these switches that control what to do with "extra"
-markers, such as comment blocks:
- -copy none Copy no extra markers from source file. This setting
- suppresses all comments and other excess baggage
- present in the source file.
- -copy comments Copy only comment markers. This setting copies
- comments from the source file, but discards
- any other inessential data.
- -copy all Copy all extra markers. This setting preserves
- miscellaneous markers found in the source file, such
- as JFIF thumbnails and Photoshop settings. In some
- files these extra markers can be sizable.
-The default behavior is -copy comments. (Note: in IJG releases v6 and v6a,
-jpegtran always did the equivalent of -copy none.)
-
-Additional switches recognized by jpegtran are:
- -outfile filename
- -maxmemory N
- -verbose
- -debug
-These work the same as in cjpeg or djpeg.
-
-
-THE COMMENT UTILITIES
-
-The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file.
-Although the standard doesn't actually define what COM blocks are for, they
-are widely used to hold user-supplied text strings. This lets you add
-annotations, titles, index terms, etc to your JPEG files, and later retrieve
-them as text. COM blocks do not interfere with the image stored in the JPEG
-file. The maximum size of a COM block is 64K, but you can have as many of
-them as you like in one JPEG file.
-
-We provide two utility programs to display COM block contents and add COM
-blocks to a JPEG file.
-
-rdjpgcom searches a JPEG file and prints the contents of any COM blocks on
-standard output. The command line syntax is
- rdjpgcom [-verbose] [inputfilename]
-The switch "-verbose" (or just "-v") causes rdjpgcom to also display the JPEG
-image dimensions. If you omit the input file name from the command line,
-the JPEG file is read from standard input. (This may not work on some
-operating systems, if binary data can't be read from stdin.)
-
-wrjpgcom adds a COM block, containing text you provide, to a JPEG file.
-Ordinarily, the COM block is added after any existing COM blocks, but you
-can delete the old COM blocks if you wish. wrjpgcom produces a new JPEG
-file; it does not modify the input file. DO NOT try to overwrite the input
-file by directing wrjpgcom's output back into it; on most systems this will
-just destroy your file.
-
-The command line syntax for wrjpgcom is similar to cjpeg's. On Unix-like
-systems, it is
- wrjpgcom [switches] [inputfilename]
-The output file is written to standard output. The input file comes from
-the named file, or from standard input if no input file is named.
-
-On most non-Unix systems, the syntax is
- wrjpgcom [switches] inputfilename outputfilename
-where both input and output file names must be given explicitly.
-
-wrjpgcom understands three switches:
- -replace Delete any existing COM blocks from the file.
- -comment "Comment text" Supply new COM text on command line.
- -cfile name Read text for new COM block from named file.
-(Switch names can be abbreviated.) If you have only one line of comment text
-to add, you can provide it on the command line with -comment. The comment
-text must be surrounded with quotes so that it is treated as a single
-argument. Longer comments can be read from a text file.
-
-If you give neither -comment nor -cfile, then wrjpgcom will read the comment
-text from standard input. (In this case an input image file name MUST be
-supplied, so that the source JPEG file comes from somewhere else.) You can
-enter multiple lines, up to 64KB worth. Type an end-of-file indicator
-(usually control-D or control-Z) to terminate the comment text entry.
-
-wrjpgcom will not add a COM block if the provided comment string is empty.
-Therefore -replace -comment "" can be used to delete all COM blocks from a
-file.
-
-These utility programs do not depend on the IJG JPEG library. In
-particular, the source code for rdjpgcom is intended as an illustration of
-the minimum amount of code required to parse a JPEG file header correctly.
diff --git a/libjpegtwrp/wizard.doc b/libjpegtwrp/wizard.doc
deleted file mode 100644
index 54170b227..000000000
--- a/libjpegtwrp/wizard.doc
+++ /dev/null
@@ -1,211 +0,0 @@
-Advanced usage instructions for the Independent JPEG Group's JPEG software
-==========================================================================
-
-This file describes cjpeg's "switches for wizards".
-
-The "wizard" switches are intended for experimentation with JPEG by persons
-who are reasonably knowledgeable about the JPEG standard. If you don't know
-what you are doing, DON'T USE THESE SWITCHES. You'll likely produce files
-with worse image quality and/or poorer compression than you'd get from the
-default settings. Furthermore, these switches must be used with caution
-when making files intended for general use, because not all JPEG decoders
-will support unusual JPEG parameter settings.
-
-
-Quantization Table Adjustment
------------------------------
-
-Ordinarily, cjpeg starts with a default set of tables (the same ones given
-as examples in the JPEG standard) and scales them up or down according to
-the -quality setting. The details of the scaling algorithm can be found in
-jcparam.c. At very low quality settings, some quantization table entries
-can get scaled up to values exceeding 255. Although 2-byte quantization
-values are supported by the IJG software, this feature is not in baseline
-JPEG and is not supported by all implementations. If you need to ensure
-wide compatibility of low-quality files, you can constrain the scaled
-quantization values to no more than 255 by giving the -baseline switch.
-Note that use of -baseline will result in poorer quality for the same file
-size, since more bits than necessary are expended on higher AC coefficients.
-
-You can substitute a different set of quantization values by using the
--qtables switch:
-
- -qtables file Use the quantization tables given in the named file.
-
-The specified file should be a text file containing decimal quantization
-values. The file should contain one to four tables, each of 64 elements.
-The tables are implicitly numbered 0,1,etc. in order of appearance. Table
-entries appear in normal array order (NOT in the zigzag order in which they
-will be stored in the JPEG file).
-
-Quantization table files are free format, in that arbitrary whitespace can
-appear between numbers. Also, comments can be included: a comment starts
-with '#' and extends to the end of the line. Here is an example file that
-duplicates the default quantization tables:
-
- # Quantization tables given in JPEG spec, section K.1
-
- # This is table 0 (the luminance table):
- 16 11 10 16 24 40 51 61
- 12 12 14 19 26 58 60 55
- 14 13 16 24 40 57 69 56
- 14 17 22 29 51 87 80 62
- 18 22 37 56 68 109 103 77
- 24 35 55 64 81 104 113 92
- 49 64 78 87 103 121 120 101
- 72 92 95 98 112 100 103 99
-
- # This is table 1 (the chrominance table):
- 17 18 24 47 99 99 99 99
- 18 21 26 66 99 99 99 99
- 24 26 56 99 99 99 99 99
- 47 66 99 99 99 99 99 99
- 99 99 99 99 99 99 99 99
- 99 99 99 99 99 99 99 99
- 99 99 99 99 99 99 99 99
- 99 99 99 99 99 99 99 99
-
-If the -qtables switch is used without -quality, then the specified tables
-are used exactly as-is. If both -qtables and -quality are used, then the
-tables taken from the file are scaled in the same fashion that the default
-tables would be scaled for that quality setting. If -baseline appears, then
-the quantization values are constrained to the range 1-255.
-
-By default, cjpeg will use quantization table 0 for luminance components and
-table 1 for chrominance components. To override this choice, use the -qslots
-switch:
-
- -qslots N[,...] Select which quantization table to use for
- each color component.
-
-The -qslots switch specifies a quantization table number for each color
-component, in the order in which the components appear in the JPEG SOF marker.
-For example, to create a separate table for each of Y,Cb,Cr, you could
-provide a -qtables file that defines three quantization tables and say
-"-qslots 0,1,2". If -qslots gives fewer table numbers than there are color
-components, then the last table number is repeated as necessary.
-
-
-Sampling Factor Adjustment
---------------------------
-
-By default, cjpeg uses 2:1 horizontal and vertical downsampling when
-compressing YCbCr data, and no downsampling for all other color spaces.
-You can override this default with the -sample switch:
-
- -sample HxV[,...] Set JPEG sampling factors for each color
- component.
-
-The -sample switch specifies the JPEG sampling factors for each color
-component, in the order in which they appear in the JPEG SOF marker.
-If you specify fewer HxV pairs than there are components, the remaining
-components are set to 1x1 sampling. For example, the default YCbCr setting
-is equivalent to "-sample 2x2,1x1,1x1", which can be abbreviated to
-"-sample 2x2".
-
-There are still some JPEG decoders in existence that support only 2x1
-sampling (also called 4:2:2 sampling). Compatibility with such decoders can
-be achieved by specifying "-sample 2x1". This is not recommended unless
-really necessary, since it increases file size and encoding/decoding time
-with very little quality gain.
-
-
-Multiple Scan / Progression Control
------------------------------------
-
-By default, cjpeg emits a single-scan sequential JPEG file. The
--progressive switch generates a progressive JPEG file using a default series
-of progression parameters. You can create multiple-scan sequential JPEG
-files or progressive JPEG files with custom progression parameters by using
-the -scans switch:
-
- -scans file Use the scan sequence given in the named file.
-
-The specified file should be a text file containing a "scan script".
-The script specifies the contents and ordering of the scans to be emitted.
-Each entry in the script defines one scan. A scan definition specifies
-the components to be included in the scan, and for progressive JPEG it also
-specifies the progression parameters Ss,Se,Ah,Al for the scan. Scan
-definitions are separated by semicolons (';'). A semicolon after the last
-scan definition is optional.
-
-Each scan definition contains one to four component indexes, optionally
-followed by a colon (':') and the four progressive-JPEG parameters. The
-component indexes denote which color component(s) are to be transmitted in
-the scan. Components are numbered in the order in which they appear in the
-JPEG SOF marker, with the first component being numbered 0. (Note that these
-indexes are not the "component ID" codes assigned to the components, just
-positional indexes.)
-
-The progression parameters for each scan are:
- Ss Zigzag index of first coefficient included in scan
- Se Zigzag index of last coefficient included in scan
- Ah Zero for first scan of a coefficient, else Al of prior scan
- Al Successive approximation low bit position for scan
-If the progression parameters are omitted, the values 0,63,0,0 are used,
-producing a sequential JPEG file. cjpeg automatically determines whether
-the script represents a progressive or sequential file, by observing whether
-Ss and Se values other than 0 and 63 appear. (The -progressive switch is
-not needed to specify this; in fact, it is ignored when -scans appears.)
-The scan script must meet the JPEG restrictions on progression sequences.
-(cjpeg checks that the spec's requirements are obeyed.)
-
-Scan script files are free format, in that arbitrary whitespace can appear
-between numbers and around punctuation. Also, comments can be included: a
-comment starts with '#' and extends to the end of the line. For additional
-legibility, commas or dashes can be placed between values. (Actually, any
-single punctuation character other than ':' or ';' can be inserted.) For
-example, the following two scan definitions are equivalent:
- 0 1 2: 0 63 0 0;
- 0,1,2 : 0-63, 0,0 ;
-
-Here is an example of a scan script that generates a partially interleaved
-sequential JPEG file:
-
- 0; # Y only in first scan
- 1 2; # Cb and Cr in second scan
-
-Here is an example of a progressive scan script using only spectral selection
-(no successive approximation):
-
- # Interleaved DC scan for Y,Cb,Cr:
- 0,1,2: 0-0, 0, 0 ;
- # AC scans:
- 0: 1-2, 0, 0 ; # First two Y AC coefficients
- 0: 3-5, 0, 0 ; # Three more
- 1: 1-63, 0, 0 ; # All AC coefficients for Cb
- 2: 1-63, 0, 0 ; # All AC coefficients for Cr
- 0: 6-9, 0, 0 ; # More Y coefficients
- 0: 10-63, 0, 0 ; # Remaining Y coefficients
-
-Here is an example of a successive-approximation script. This is equivalent
-to the default script used by "cjpeg -progressive" for YCbCr images:
-
- # Initial DC scan for Y,Cb,Cr (lowest bit not sent)
- 0,1,2: 0-0, 0, 1 ;
- # First AC scan: send first 5 Y AC coefficients, minus 2 lowest bits:
- 0: 1-5, 0, 2 ;
- # Send all Cr,Cb AC coefficients, minus lowest bit:
- # (chroma data is usually too small to be worth subdividing further;
- # but note we send Cr first since eye is least sensitive to Cb)
- 2: 1-63, 0, 1 ;
- 1: 1-63, 0, 1 ;
- # Send remaining Y AC coefficients, minus 2 lowest bits:
- 0: 6-63, 0, 2 ;
- # Send next-to-lowest bit of all Y AC coefficients:
- 0: 1-63, 2, 1 ;
- # At this point we've sent all but the lowest bit of all coefficients.
- # Send lowest bit of DC coefficients
- 0,1,2: 0-0, 1, 0 ;
- # Send lowest bit of AC coefficients
- 2: 1-63, 1, 0 ;
- 1: 1-63, 1, 0 ;
- # Y AC lowest bit scan is last; it's usually the largest scan
- 0: 1-63, 1, 0 ;
-
-It may be worth pointing out that this script is tuned for quality settings
-of around 50 to 75. For lower quality settings, you'd probably want to use
-a script with fewer stages of successive approximation (otherwise the
-initial scans will be really bad). For higher quality settings, you might
-want to use more stages of successive approximation (so that the initial
-scans are not too large).
diff --git a/libjpegtwrp/wrbmp.c b/libjpegtwrp/wrbmp.c
deleted file mode 100644
index 3283b0f15..000000000
--- a/libjpegtwrp/wrbmp.c
+++ /dev/null
@@ -1,442 +0,0 @@
-/*
- * wrbmp.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to write output images in Microsoft "BMP"
- * format (MS Windows 3.x and OS/2 1.x flavors).
- * Either 8-bit colormapped or 24-bit full-color format can be written.
- * No compression is supported.
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications. As they stand, they assume output to
- * an ordinary stdio stream.
- *
- * This code contributed by James Arthur Boucher.
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-
-#ifdef BMP_SUPPORTED
-
-
-/*
- * To support 12-bit JPEG data, we'd have to scale output down to 8 bits.
- * This is not yet implemented.
- */
-
-#if BITS_IN_JSAMPLE != 8
- Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
-#endif
-
-/*
- * Since BMP stores scanlines bottom-to-top, we have to invert the image
- * from JPEG's top-to-bottom order. To do this, we save the outgoing data
- * in a virtual array during put_pixel_row calls, then actually emit the
- * BMP file during finish_output. The virtual array contains one JSAMPLE per
- * pixel if the output is grayscale or colormapped, three if it is full color.
- */
-
-/* Private version of data destination object */
-
-typedef struct {
- struct djpeg_dest_struct pub; /* public fields */
-
- boolean is_os2; /* saves the OS2 format request flag */
-
- jvirt_sarray_ptr whole_image; /* needed to reverse row order */
- JDIMENSION data_width; /* JSAMPLEs per row */
- JDIMENSION row_width; /* physical width of one row in the BMP file */
- int pad_bytes; /* number of padding bytes needed per row */
- JDIMENSION cur_output_row; /* next row# to write to virtual array */
-} bmp_dest_struct;
-
-typedef bmp_dest_struct * bmp_dest_ptr;
-
-
-/* Forward declarations */
-LOCAL(void) write_colormap
- JPP((j_decompress_ptr cinfo, bmp_dest_ptr dest,
- int map_colors, int map_entry_size));
-
-
-/*
- * Write some pixel data.
- * In this module rows_supplied will always be 1.
- */
-
-METHODDEF(void)
-put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
- JDIMENSION rows_supplied)
-/* This version is for writing 24-bit pixels */
-{
- bmp_dest_ptr dest = (bmp_dest_ptr) dinfo;
- JSAMPARRAY image_ptr;
- register JSAMPROW inptr, outptr;
- register JDIMENSION col;
- int pad;
-
- /* Access next row in virtual array */
- image_ptr = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, dest->whole_image,
- dest->cur_output_row, (JDIMENSION) 1, TRUE);
- dest->cur_output_row++;
-
- /* Transfer data. Note destination values must be in BGR order
- * (even though Microsoft's own documents say the opposite).
- */
- inptr = dest->pub.buffer[0];
- outptr = image_ptr[0];
- for (col = cinfo->output_width; col > 0; col--) {
- outptr[2] = *inptr++; /* can omit GETJSAMPLE() safely */
- outptr[1] = *inptr++;
- outptr[0] = *inptr++;
- outptr += 3;
- }
-
- /* Zero out the pad bytes. */
- pad = dest->pad_bytes;
- while (--pad >= 0)
- *outptr++ = 0;
-}
-
-METHODDEF(void)
-put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
- JDIMENSION rows_supplied)
-/* This version is for grayscale OR quantized color output */
-{
- bmp_dest_ptr dest = (bmp_dest_ptr) dinfo;
- JSAMPARRAY image_ptr;
- register JSAMPROW inptr, outptr;
- register JDIMENSION col;
- int pad;
-
- /* Access next row in virtual array */
- image_ptr = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, dest->whole_image,
- dest->cur_output_row, (JDIMENSION) 1, TRUE);
- dest->cur_output_row++;
-
- /* Transfer data. */
- inptr = dest->pub.buffer[0];
- outptr = image_ptr[0];
- for (col = cinfo->output_width; col > 0; col--) {
- *outptr++ = *inptr++; /* can omit GETJSAMPLE() safely */
- }
-
- /* Zero out the pad bytes. */
- pad = dest->pad_bytes;
- while (--pad >= 0)
- *outptr++ = 0;
-}
-
-
-/*
- * Startup: normally writes the file header.
- * In this module we may as well postpone everything until finish_output.
- */
-
-METHODDEF(void)
-start_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
- /* no work here */
-}
-
-
-/*
- * Finish up at the end of the file.
- *
- * Here is where we really output the BMP file.
- *
- * First, routines to write the Windows and OS/2 variants of the file header.
- */
-
-LOCAL(void)
-write_bmp_header (j_decompress_ptr cinfo, bmp_dest_ptr dest)
-/* Write a Windows-style BMP file header, including colormap if needed */
-{
- char bmpfileheader[14];
- char bmpinfoheader[40];
-#define PUT_2B(array,offset,value) \
- (array[offset] = (char) ((value) & 0xFF), \
- array[offset+1] = (char) (((value) >> 8) & 0xFF))
-#define PUT_4B(array,offset,value) \
- (array[offset] = (char) ((value) & 0xFF), \
- array[offset+1] = (char) (((value) >> 8) & 0xFF), \
- array[offset+2] = (char) (((value) >> 16) & 0xFF), \
- array[offset+3] = (char) (((value) >> 24) & 0xFF))
- INT32 headersize, bfSize;
- int bits_per_pixel, cmap_entries;
-
- /* Compute colormap size and total file size */
- if (cinfo->out_color_space == JCS_RGB) {
- if (cinfo->quantize_colors) {
- /* Colormapped RGB */
- bits_per_pixel = 8;
- cmap_entries = 256;
- } else {
- /* Unquantized, full color RGB */
- bits_per_pixel = 24;
- cmap_entries = 0;
- }
- } else {
- /* Grayscale output. We need to fake a 256-entry colormap. */
- bits_per_pixel = 8;
- cmap_entries = 256;
- }
- /* File size */
- headersize = 14 + 40 + cmap_entries * 4; /* Header and colormap */
- bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height;
-
- /* Set unused fields of header to 0 */
- MEMZERO(bmpfileheader, SIZEOF(bmpfileheader));
- MEMZERO(bmpinfoheader, SIZEOF(bmpinfoheader));
-
- /* Fill the file header */
- bmpfileheader[0] = 0x42; /* first 2 bytes are ASCII 'B', 'M' */
- bmpfileheader[1] = 0x4D;
- PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */
- /* we leave bfReserved1 & bfReserved2 = 0 */
- PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */
-
- /* Fill the info header (Microsoft calls this a BITMAPINFOHEADER) */
- PUT_2B(bmpinfoheader, 0, 40); /* biSize */
- PUT_4B(bmpinfoheader, 4, cinfo->output_width); /* biWidth */
- PUT_4B(bmpinfoheader, 8, cinfo->output_height); /* biHeight */
- PUT_2B(bmpinfoheader, 12, 1); /* biPlanes - must be 1 */
- PUT_2B(bmpinfoheader, 14, bits_per_pixel); /* biBitCount */
- /* we leave biCompression = 0, for none */
- /* we leave biSizeImage = 0; this is correct for uncompressed data */
- if (cinfo->density_unit == 2) { /* if have density in dots/cm, then */
- PUT_4B(bmpinfoheader, 24, (INT32) (cinfo->X_density*100)); /* XPels/M */
- PUT_4B(bmpinfoheader, 28, (INT32) (cinfo->Y_density*100)); /* XPels/M */
- }
- PUT_2B(bmpinfoheader, 32, cmap_entries); /* biClrUsed */
- /* we leave biClrImportant = 0 */
-
- if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14)
- ERREXIT(cinfo, JERR_FILE_WRITE);
- if (JFWRITE(dest->pub.output_file, bmpinfoheader, 40) != (size_t) 40)
- ERREXIT(cinfo, JERR_FILE_WRITE);
-
- if (cmap_entries > 0)
- write_colormap(cinfo, dest, cmap_entries, 4);
-}
-
-
-LOCAL(void)
-write_os2_header (j_decompress_ptr cinfo, bmp_dest_ptr dest)
-/* Write an OS2-style BMP file header, including colormap if needed */
-{
- char bmpfileheader[14];
- char bmpcoreheader[12];
- INT32 headersize, bfSize;
- int bits_per_pixel, cmap_entries;
-
- /* Compute colormap size and total file size */
- if (cinfo->out_color_space == JCS_RGB) {
- if (cinfo->quantize_colors) {
- /* Colormapped RGB */
- bits_per_pixel = 8;
- cmap_entries = 256;
- } else {
- /* Unquantized, full color RGB */
- bits_per_pixel = 24;
- cmap_entries = 0;
- }
- } else {
- /* Grayscale output. We need to fake a 256-entry colormap. */
- bits_per_pixel = 8;
- cmap_entries = 256;
- }
- /* File size */
- headersize = 14 + 12 + cmap_entries * 3; /* Header and colormap */
- bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height;
-
- /* Set unused fields of header to 0 */
- MEMZERO(bmpfileheader, SIZEOF(bmpfileheader));
- MEMZERO(bmpcoreheader, SIZEOF(bmpcoreheader));
-
- /* Fill the file header */
- bmpfileheader[0] = 0x42; /* first 2 bytes are ASCII 'B', 'M' */
- bmpfileheader[1] = 0x4D;
- PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */
- /* we leave bfReserved1 & bfReserved2 = 0 */
- PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */
-
- /* Fill the info header (Microsoft calls this a BITMAPCOREHEADER) */
- PUT_2B(bmpcoreheader, 0, 12); /* bcSize */
- PUT_2B(bmpcoreheader, 4, cinfo->output_width); /* bcWidth */
- PUT_2B(bmpcoreheader, 6, cinfo->output_height); /* bcHeight */
- PUT_2B(bmpcoreheader, 8, 1); /* bcPlanes - must be 1 */
- PUT_2B(bmpcoreheader, 10, bits_per_pixel); /* bcBitCount */
-
- if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14)
- ERREXIT(cinfo, JERR_FILE_WRITE);
- if (JFWRITE(dest->pub.output_file, bmpcoreheader, 12) != (size_t) 12)
- ERREXIT(cinfo, JERR_FILE_WRITE);
-
- if (cmap_entries > 0)
- write_colormap(cinfo, dest, cmap_entries, 3);
-}
-
-
-/*
- * Write the colormap.
- * Windows uses BGR0 map entries; OS/2 uses BGR entries.
- */
-
-LOCAL(void)
-write_colormap (j_decompress_ptr cinfo, bmp_dest_ptr dest,
- int map_colors, int map_entry_size)
-{
- JSAMPARRAY colormap = cinfo->colormap;
- int num_colors = cinfo->actual_number_of_colors;
- FILE * outfile = dest->pub.output_file;
- int i;
-
- if (colormap != NULL) {
- if (cinfo->out_color_components == 3) {
- /* Normal case with RGB colormap */
- for (i = 0; i < num_colors; i++) {
- putc(GETJSAMPLE(colormap[2][i]), outfile);
- putc(GETJSAMPLE(colormap[1][i]), outfile);
- putc(GETJSAMPLE(colormap[0][i]), outfile);
- if (map_entry_size == 4)
- putc(0, outfile);
- }
- } else {
- /* Grayscale colormap (only happens with grayscale quantization) */
- for (i = 0; i < num_colors; i++) {
- putc(GETJSAMPLE(colormap[0][i]), outfile);
- putc(GETJSAMPLE(colormap[0][i]), outfile);
- putc(GETJSAMPLE(colormap[0][i]), outfile);
- if (map_entry_size == 4)
- putc(0, outfile);
- }
- }
- } else {
- /* If no colormap, must be grayscale data. Generate a linear "map". */
- for (i = 0; i < 256; i++) {
- putc(i, outfile);
- putc(i, outfile);
- putc(i, outfile);
- if (map_entry_size == 4)
- putc(0, outfile);
- }
- }
- /* Pad colormap with zeros to ensure specified number of colormap entries */
- if (i > map_colors)
- ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, i);
- for (; i < map_colors; i++) {
- putc(0, outfile);
- putc(0, outfile);
- putc(0, outfile);
- if (map_entry_size == 4)
- putc(0, outfile);
- }
-}
-
-
-METHODDEF(void)
-finish_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
- bmp_dest_ptr dest = (bmp_dest_ptr) dinfo;
- register FILE * outfile = dest->pub.output_file;
- JSAMPARRAY image_ptr;
- register JSAMPROW data_ptr;
- JDIMENSION row;
- register JDIMENSION col;
- cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-
- /* Write the header and colormap */
- if (dest->is_os2)
- write_os2_header(cinfo, dest);
- else
- write_bmp_header(cinfo, dest);
-
- /* Write the file body from our virtual array */
- for (row = cinfo->output_height; row > 0; row--) {
- if (progress != NULL) {
- progress->pub.pass_counter = (long) (cinfo->output_height - row);
- progress->pub.pass_limit = (long) cinfo->output_height;
- (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
- }
- image_ptr = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, dest->whole_image, row-1, (JDIMENSION) 1, FALSE);
- data_ptr = image_ptr[0];
- for (col = dest->row_width; col > 0; col--) {
- putc(GETJSAMPLE(*data_ptr), outfile);
- data_ptr++;
- }
- }
- if (progress != NULL)
- progress->completed_extra_passes++;
-
- /* Make sure we wrote the output file OK */
- fflush(outfile);
- if (ferror(outfile))
- ERREXIT(cinfo, JERR_FILE_WRITE);
-}
-
-
-/*
- * The module selection routine for BMP format output.
- */
-
-GLOBAL(djpeg_dest_ptr)
-jinit_write_bmp (j_decompress_ptr cinfo, boolean is_os2)
-{
- bmp_dest_ptr dest;
- JDIMENSION row_width;
-
- /* Create module interface object, fill in method pointers */
- dest = (bmp_dest_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(bmp_dest_struct));
- dest->pub.start_output = start_output_bmp;
- dest->pub.finish_output = finish_output_bmp;
- dest->is_os2 = is_os2;
-
- if (cinfo->out_color_space == JCS_GRAYSCALE) {
- dest->pub.put_pixel_rows = put_gray_rows;
- } else if (cinfo->out_color_space == JCS_RGB) {
- if (cinfo->quantize_colors)
- dest->pub.put_pixel_rows = put_gray_rows;
- else
- dest->pub.put_pixel_rows = put_pixel_rows;
- } else {
- ERREXIT(cinfo, JERR_BMP_COLORSPACE);
- }
-
- /* Calculate output image dimensions so we can allocate space */
- jpeg_calc_output_dimensions(cinfo);
-
- /* Determine width of rows in the BMP file (padded to 4-byte boundary). */
- row_width = cinfo->output_width * cinfo->output_components;
- dest->data_width = row_width;
- while ((row_width & 3) != 0) row_width++;
- dest->row_width = row_width;
- dest->pad_bytes = (int) (row_width - dest->data_width);
-
- /* Allocate space for inversion array, prepare for write pass */
- dest->whole_image = (*cinfo->mem->request_virt_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
- row_width, cinfo->output_height, (JDIMENSION) 1);
- dest->cur_output_row = 0;
- if (cinfo->progress != NULL) {
- cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
- progress->total_extra_passes++; /* count file input as separate pass */
- }
-
- /* Create decompressor output buffer. */
- dest->pub.buffer = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, row_width, (JDIMENSION) 1);
- dest->pub.buffer_height = 1;
-
- return (djpeg_dest_ptr) dest;
-}
-
-#endif /* BMP_SUPPORTED */
diff --git a/libjpegtwrp/wrgif.c b/libjpegtwrp/wrgif.c
deleted file mode 100644
index 5fe832839..000000000
--- a/libjpegtwrp/wrgif.c
+++ /dev/null
@@ -1,399 +0,0 @@
-/*
- * wrgif.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to write output images in GIF format.
- *
- **************************************************************************
- * NOTE: to avoid entanglements with Unisys' patent on LZW compression, *
- * this code has been modified to output "uncompressed GIF" files. *
- * There is no trace of the LZW algorithm in this file. *
- **************************************************************************
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications. As they stand, they assume output to
- * an ordinary stdio stream.
- */
-
-/*
- * This code is loosely based on ppmtogif from the PBMPLUS distribution
- * of Feb. 1991. That file contains the following copyright notice:
- * Based on GIFENCODE by David Rowley <mgardi@watdscu.waterloo.edu>.
- * Lempel-Ziv compression based on "compress" by Spencer W. Thomas et al.
- * Copyright (C) 1989 by Jef Poskanzer.
- * Permission to use, copy, modify, and distribute this software and its
- * documentation for any purpose and without fee is hereby granted, provided
- * that the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation. This software is provided "as is" without express or
- * implied warranty.
- *
- * We are also required to state that
- * "The Graphics Interchange Format(c) is the Copyright property of
- * CompuServe Incorporated. GIF(sm) is a Service Mark property of
- * CompuServe Incorporated."
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-
-#ifdef GIF_SUPPORTED
-
-
-/* Private version of data destination object */
-
-typedef struct {
- struct djpeg_dest_struct pub; /* public fields */
-
- j_decompress_ptr cinfo; /* back link saves passing separate parm */
-
- /* State for packing variable-width codes into a bitstream */
- int n_bits; /* current number of bits/code */
- int maxcode; /* maximum code, given n_bits */
- INT32 cur_accum; /* holds bits not yet output */
- int cur_bits; /* # of bits in cur_accum */
-
- /* State for GIF code assignment */
- int ClearCode; /* clear code (doesn't change) */
- int EOFCode; /* EOF code (ditto) */
- int code_counter; /* counts output symbols */
-
- /* GIF data packet construction buffer */
- int bytesinpkt; /* # of bytes in current packet */
- char packetbuf[256]; /* workspace for accumulating packet */
-
-} gif_dest_struct;
-
-typedef gif_dest_struct * gif_dest_ptr;
-
-/* Largest value that will fit in N bits */
-#define MAXCODE(n_bits) ((1 << (n_bits)) - 1)
-
-
-/*
- * Routines to package finished data bytes into GIF data blocks.
- * A data block consists of a count byte (1..255) and that many data bytes.
- */
-
-LOCAL(void)
-flush_packet (gif_dest_ptr dinfo)
-/* flush any accumulated data */
-{
- if (dinfo->bytesinpkt > 0) { /* never write zero-length packet */
- dinfo->packetbuf[0] = (char) dinfo->bytesinpkt++;
- if (JFWRITE(dinfo->pub.output_file, dinfo->packetbuf, dinfo->bytesinpkt)
- != (size_t) dinfo->bytesinpkt)
- ERREXIT(dinfo->cinfo, JERR_FILE_WRITE);
- dinfo->bytesinpkt = 0;
- }
-}
-
-
-/* Add a character to current packet; flush to disk if necessary */
-#define CHAR_OUT(dinfo,c) \
- { (dinfo)->packetbuf[++(dinfo)->bytesinpkt] = (char) (c); \
- if ((dinfo)->bytesinpkt >= 255) \
- flush_packet(dinfo); \
- }
-
-
-/* Routine to convert variable-width codes into a byte stream */
-
-LOCAL(void)
-output (gif_dest_ptr dinfo, int code)
-/* Emit a code of n_bits bits */
-/* Uses cur_accum and cur_bits to reblock into 8-bit bytes */
-{
- dinfo->cur_accum |= ((INT32) code) << dinfo->cur_bits;
- dinfo->cur_bits += dinfo->n_bits;
-
- while (dinfo->cur_bits >= 8) {
- CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF);
- dinfo->cur_accum >>= 8;
- dinfo->cur_bits -= 8;
- }
-}
-
-
-/* The pseudo-compression algorithm.
- *
- * In this module we simply output each pixel value as a separate symbol;
- * thus, no compression occurs. In fact, there is expansion of one bit per
- * pixel, because we use a symbol width one bit wider than the pixel width.
- *
- * GIF ordinarily uses variable-width symbols, and the decoder will expect
- * to ratchet up the symbol width after a fixed number of symbols.
- * To simplify the logic and keep the expansion penalty down, we emit a
- * GIF Clear code to reset the decoder just before the width would ratchet up.
- * Thus, all the symbols in the output file will have the same bit width.
- * Note that emitting the Clear codes at the right times is a mere matter of
- * counting output symbols and is in no way dependent on the LZW patent.
- *
- * With a small basic pixel width (low color count), Clear codes will be
- * needed very frequently, causing the file to expand even more. So this
- * simplistic approach wouldn't work too well on bilevel images, for example.
- * But for output of JPEG conversions the pixel width will usually be 8 bits
- * (129 to 256 colors), so the overhead added by Clear symbols is only about
- * one symbol in every 256.
- */
-
-LOCAL(void)
-compress_init (gif_dest_ptr dinfo, int i_bits)
-/* Initialize pseudo-compressor */
-{
- /* init all the state variables */
- dinfo->n_bits = i_bits;
- dinfo->maxcode = MAXCODE(dinfo->n_bits);
- dinfo->ClearCode = (1 << (i_bits - 1));
- dinfo->EOFCode = dinfo->ClearCode + 1;
- dinfo->code_counter = dinfo->ClearCode + 2;
- /* init output buffering vars */
- dinfo->bytesinpkt = 0;
- dinfo->cur_accum = 0;
- dinfo->cur_bits = 0;
- /* GIF specifies an initial Clear code */
- output(dinfo, dinfo->ClearCode);
-}
-
-
-LOCAL(void)
-compress_pixel (gif_dest_ptr dinfo, int c)
-/* Accept and "compress" one pixel value.
- * The given value must be less than n_bits wide.
- */
-{
- /* Output the given pixel value as a symbol. */
- output(dinfo, c);
- /* Issue Clear codes often enough to keep the reader from ratcheting up
- * its symbol size.
- */
- if (dinfo->code_counter < dinfo->maxcode) {
- dinfo->code_counter++;
- } else {
- output(dinfo, dinfo->ClearCode);
- dinfo->code_counter = dinfo->ClearCode + 2; /* reset the counter */
- }
-}
-
-
-LOCAL(void)
-compress_term (gif_dest_ptr dinfo)
-/* Clean up at end */
-{
- /* Send an EOF code */
- output(dinfo, dinfo->EOFCode);
- /* Flush the bit-packing buffer */
- if (dinfo->cur_bits > 0) {
- CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF);
- }
- /* Flush the packet buffer */
- flush_packet(dinfo);
-}
-
-
-/* GIF header construction */
-
-
-LOCAL(void)
-put_word (gif_dest_ptr dinfo, unsigned int w)
-/* Emit a 16-bit word, LSB first */
-{
- putc(w & 0xFF, dinfo->pub.output_file);
- putc((w >> 8) & 0xFF, dinfo->pub.output_file);
-}
-
-
-LOCAL(void)
-put_3bytes (gif_dest_ptr dinfo, int val)
-/* Emit 3 copies of same byte value --- handy subr for colormap construction */
-{
- putc(val, dinfo->pub.output_file);
- putc(val, dinfo->pub.output_file);
- putc(val, dinfo->pub.output_file);
-}
-
-
-LOCAL(void)
-emit_header (gif_dest_ptr dinfo, int num_colors, JSAMPARRAY colormap)
-/* Output the GIF file header, including color map */
-/* If colormap==NULL, synthesize a gray-scale colormap */
-{
- int BitsPerPixel, ColorMapSize, InitCodeSize, FlagByte;
- int cshift = dinfo->cinfo->data_precision - 8;
- int i;
-
- if (num_colors > 256)
- ERREXIT1(dinfo->cinfo, JERR_TOO_MANY_COLORS, num_colors);
- /* Compute bits/pixel and related values */
- BitsPerPixel = 1;
- while (num_colors > (1 << BitsPerPixel))
- BitsPerPixel++;
- ColorMapSize = 1 << BitsPerPixel;
- if (BitsPerPixel <= 1)
- InitCodeSize = 2;
- else
- InitCodeSize = BitsPerPixel;
- /*
- * Write the GIF header.
- * Note that we generate a plain GIF87 header for maximum compatibility.
- */
- putc('G', dinfo->pub.output_file);
- putc('I', dinfo->pub.output_file);
- putc('F', dinfo->pub.output_file);
- putc('8', dinfo->pub.output_file);
- putc('7', dinfo->pub.output_file);
- putc('a', dinfo->pub.output_file);
- /* Write the Logical Screen Descriptor */
- put_word(dinfo, (unsigned int) dinfo->cinfo->output_width);
- put_word(dinfo, (unsigned int) dinfo->cinfo->output_height);
- FlagByte = 0x80; /* Yes, there is a global color table */
- FlagByte |= (BitsPerPixel-1) << 4; /* color resolution */
- FlagByte |= (BitsPerPixel-1); /* size of global color table */
- putc(FlagByte, dinfo->pub.output_file);
- putc(0, dinfo->pub.output_file); /* Background color index */
- putc(0, dinfo->pub.output_file); /* Reserved (aspect ratio in GIF89) */
- /* Write the Global Color Map */
- /* If the color map is more than 8 bits precision, */
- /* we reduce it to 8 bits by shifting */
- for (i=0; i < ColorMapSize; i++) {
- if (i < num_colors) {
- if (colormap != NULL) {
- if (dinfo->cinfo->out_color_space == JCS_RGB) {
- /* Normal case: RGB color map */
- putc(GETJSAMPLE(colormap[0][i]) >> cshift, dinfo->pub.output_file);
- putc(GETJSAMPLE(colormap[1][i]) >> cshift, dinfo->pub.output_file);
- putc(GETJSAMPLE(colormap[2][i]) >> cshift, dinfo->pub.output_file);
- } else {
- /* Grayscale "color map": possible if quantizing grayscale image */
- put_3bytes(dinfo, GETJSAMPLE(colormap[0][i]) >> cshift);
- }
- } else {
- /* Create a gray-scale map of num_colors values, range 0..255 */
- put_3bytes(dinfo, (i * 255 + (num_colors-1)/2) / (num_colors-1));
- }
- } else {
- /* fill out the map to a power of 2 */
- put_3bytes(dinfo, 0);
- }
- }
- /* Write image separator and Image Descriptor */
- putc(',', dinfo->pub.output_file); /* separator */
- put_word(dinfo, 0); /* left/top offset */
- put_word(dinfo, 0);
- put_word(dinfo, (unsigned int) dinfo->cinfo->output_width); /* image size */
- put_word(dinfo, (unsigned int) dinfo->cinfo->output_height);
- /* flag byte: not interlaced, no local color map */
- putc(0x00, dinfo->pub.output_file);
- /* Write Initial Code Size byte */
- putc(InitCodeSize, dinfo->pub.output_file);
-
- /* Initialize for "compression" of image data */
- compress_init(dinfo, InitCodeSize+1);
-}
-
-
-/*
- * Startup: write the file header.
- */
-
-METHODDEF(void)
-start_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
- gif_dest_ptr dest = (gif_dest_ptr) dinfo;
-
- if (cinfo->quantize_colors)
- emit_header(dest, cinfo->actual_number_of_colors, cinfo->colormap);
- else
- emit_header(dest, 256, (JSAMPARRAY) NULL);
-}
-
-
-/*
- * Write some pixel data.
- * In this module rows_supplied will always be 1.
- */
-
-METHODDEF(void)
-put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
- JDIMENSION rows_supplied)
-{
- gif_dest_ptr dest = (gif_dest_ptr) dinfo;
- register JSAMPROW ptr;
- register JDIMENSION col;
-
- ptr = dest->pub.buffer[0];
- for (col = cinfo->output_width; col > 0; col--) {
- compress_pixel(dest, GETJSAMPLE(*ptr++));
- }
-}
-
-
-/*
- * Finish up at the end of the file.
- */
-
-METHODDEF(void)
-finish_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
- gif_dest_ptr dest = (gif_dest_ptr) dinfo;
-
- /* Flush "compression" mechanism */
- compress_term(dest);
- /* Write a zero-length data block to end the series */
- putc(0, dest->pub.output_file);
- /* Write the GIF terminator mark */
- putc(';', dest->pub.output_file);
- /* Make sure we wrote the output file OK */
- fflush(dest->pub.output_file);
- if (ferror(dest->pub.output_file))
- ERREXIT(cinfo, JERR_FILE_WRITE);
-}
-
-
-/*
- * The module selection routine for GIF format output.
- */
-
-GLOBAL(djpeg_dest_ptr)
-jinit_write_gif (j_decompress_ptr cinfo)
-{
- gif_dest_ptr dest;
-
- /* Create module interface object, fill in method pointers */
- dest = (gif_dest_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(gif_dest_struct));
- dest->cinfo = cinfo; /* make back link for subroutines */
- dest->pub.start_output = start_output_gif;
- dest->pub.put_pixel_rows = put_pixel_rows;
- dest->pub.finish_output = finish_output_gif;
-
- if (cinfo->out_color_space != JCS_GRAYSCALE &&
- cinfo->out_color_space != JCS_RGB)
- ERREXIT(cinfo, JERR_GIF_COLORSPACE);
-
- /* Force quantization if color or if > 8 bits input */
- if (cinfo->out_color_space != JCS_GRAYSCALE || cinfo->data_precision > 8) {
- /* Force quantization to at most 256 colors */
- cinfo->quantize_colors = TRUE;
- if (cinfo->desired_number_of_colors > 256)
- cinfo->desired_number_of_colors = 256;
- }
-
- /* Calculate output image dimensions so we can allocate space */
- jpeg_calc_output_dimensions(cinfo);
-
- if (cinfo->output_components != 1) /* safety check: just one component? */
- ERREXIT(cinfo, JERR_GIF_BUG);
-
- /* Create decompressor output buffer. */
- dest->pub.buffer = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, cinfo->output_width, (JDIMENSION) 1);
- dest->pub.buffer_height = 1;
-
- return (djpeg_dest_ptr) dest;
-}
-
-#endif /* GIF_SUPPORTED */
diff --git a/libjpegtwrp/wrjpgcom.1 b/libjpegtwrp/wrjpgcom.1
deleted file mode 100644
index d419a9999..000000000
--- a/libjpegtwrp/wrjpgcom.1
+++ /dev/null
@@ -1,103 +0,0 @@
-.TH WRJPGCOM 1 "15 June 1995"
-.SH NAME
-wrjpgcom \- insert text comments into a JPEG file
-.SH SYNOPSIS
-.B wrjpgcom
-[
-.B \-replace
-]
-[
-.BI \-comment " text"
-]
-[
-.BI \-cfile " name"
-]
-[
-.I filename
-]
-.LP
-.SH DESCRIPTION
-.LP
-.B wrjpgcom
-reads the named JPEG/JFIF file, or the standard input if no file is named,
-and generates a new JPEG/JFIF file on standard output. A comment block is
-added to the file.
-.PP
-The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file.
-Although the standard doesn't actually define what COM blocks are for, they
-are widely used to hold user-supplied text strings. This lets you add
-annotations, titles, index terms, etc to your JPEG files, and later retrieve
-them as text. COM blocks do not interfere with the image stored in the JPEG
-file. The maximum size of a COM block is 64K, but you can have as many of
-them as you like in one JPEG file.
-.PP
-.B wrjpgcom
-adds a COM block, containing text you provide, to a JPEG file.
-Ordinarily, the COM block is added after any existing COM blocks; but you
-can delete the old COM blocks if you wish.
-.SH OPTIONS
-Switch names may be abbreviated, and are not case sensitive.
-.TP
-.B \-replace
-Delete any existing COM blocks from the file.
-.TP
-.BI \-comment " text"
-Supply text for new COM block on command line.
-.TP
-.BI \-cfile " name"
-Read text for new COM block from named file.
-.PP
-If you have only one line of comment text to add, you can provide it on the
-command line with
-.BR \-comment .
-The comment text must be surrounded with quotes so that it is treated as a
-single argument. Longer comments can be read from a text file.
-.PP
-If you give neither
-.B \-comment
-nor
-.BR \-cfile ,
-then
-.B wrjpgcom
-will read the comment text from standard input. (In this case an input image
-file name MUST be supplied, so that the source JPEG file comes from somewhere
-else.) You can enter multiple lines, up to 64KB worth. Type an end-of-file
-indicator (usually control-D) to terminate the comment text entry.
-.PP
-.B wrjpgcom
-will not add a COM block if the provided comment string is empty. Therefore
-\fB\-replace \-comment ""\fR can be used to delete all COM blocks from a file.
-.SH EXAMPLES
-.LP
-Add a short comment to in.jpg, producing out.jpg:
-.IP
-.B wrjpgcom \-c
-\fI"View of my back yard" in.jpg
-.B >
-.I out.jpg
-.PP
-Attach a long comment previously stored in comment.txt:
-.IP
-.B wrjpgcom
-.I in.jpg
-.B <
-.I comment.txt
-.B >
-.I out.jpg
-.PP
-or equivalently
-.IP
-.B wrjpgcom
-.B -cfile
-.I comment.txt
-.B <
-.I in.jpg
-.B >
-.I out.jpg
-.SH SEE ALSO
-.BR cjpeg (1),
-.BR djpeg (1),
-.BR jpegtran (1),
-.BR rdjpgcom (1)
-.SH AUTHOR
-Independent JPEG Group
diff --git a/libjpegtwrp/wrjpgcom.c b/libjpegtwrp/wrjpgcom.c
deleted file mode 100644
index 8c04b0551..000000000
--- a/libjpegtwrp/wrjpgcom.c
+++ /dev/null
@@ -1,583 +0,0 @@
-/*
- * wrjpgcom.c
- *
- * Copyright (C) 1994-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a very simple stand-alone application that inserts
- * user-supplied text as a COM (comment) marker in a JFIF file.
- * This may be useful as an example of the minimum logic needed to parse
- * JPEG markers.
- */
-
-#define JPEG_CJPEG_DJPEG /* to get the command-line config symbols */
-#include "jinclude.h" /* get auto-config symbols, <stdio.h> */
-
-#ifndef HAVE_STDLIB_H /* <stdlib.h> should declare malloc() */
-extern void * malloc ();
-#endif
-#include <ctype.h> /* to declare isupper(), tolower() */
-#ifdef USE_SETMODE
-#include <fcntl.h> /* to declare setmode()'s parameter macros */
-/* If you have setmode() but not <io.h>, just delete this line: */
-#include <io.h> /* to declare setmode() */
-#endif
-
-#ifdef USE_CCOMMAND /* command-line reader for Macintosh */
-#ifdef __MWERKS__
-#include <SIOUX.h> /* Metrowerks needs this */
-#include <console.h> /* ... and this */
-#endif
-#ifdef THINK_C
-#include <console.h> /* Think declares it here */
-#endif
-#endif
-
-#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */
-#define READ_BINARY "r"
-#define WRITE_BINARY "w"
-#else
-#ifdef VMS /* VMS is very nonstandard */
-#define READ_BINARY "rb", "ctx=stm"
-#define WRITE_BINARY "wb", "ctx=stm"
-#else /* standard ANSI-compliant case */
-#define READ_BINARY "rb"
-#define WRITE_BINARY "wb"
-#endif
-#endif
-
-#ifndef EXIT_FAILURE /* define exit() codes if not provided */
-#define EXIT_FAILURE 1
-#endif
-#ifndef EXIT_SUCCESS
-#ifdef VMS
-#define EXIT_SUCCESS 1 /* VMS is very nonstandard */
-#else
-#define EXIT_SUCCESS 0
-#endif
-#endif
-
-/* Reduce this value if your malloc() can't allocate blocks up to 64K.
- * On DOS, compiling in large model is usually a better solution.
- */
-
-#ifndef MAX_COM_LENGTH
-#define MAX_COM_LENGTH 65000L /* must be <= 65533 in any case */
-#endif
-
-
-/*
- * These macros are used to read the input file and write the output file.
- * To reuse this code in another application, you might need to change these.
- */
-
-static FILE * infile; /* input JPEG file */
-
-/* Return next input byte, or EOF if no more */
-#define NEXTBYTE() getc(infile)
-
-static FILE * outfile; /* output JPEG file */
-
-/* Emit an output byte */
-#define PUTBYTE(x) putc((x), outfile)
-
-
-/* Error exit handler */
-#define ERREXIT(msg) (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE))
-
-
-/* Read one byte, testing for EOF */
-static int
-read_1_byte (void)
-{
- int c;
-
- c = NEXTBYTE();
- if (c == EOF)
- ERREXIT("Premature EOF in JPEG file");
- return c;
-}
-
-/* Read 2 bytes, convert to unsigned int */
-/* All 2-byte quantities in JPEG markers are MSB first */
-static unsigned int
-read_2_bytes (void)
-{
- int c1, c2;
-
- c1 = NEXTBYTE();
- if (c1 == EOF)
- ERREXIT("Premature EOF in JPEG file");
- c2 = NEXTBYTE();
- if (c2 == EOF)
- ERREXIT("Premature EOF in JPEG file");
- return (((unsigned int) c1) << 8) + ((unsigned int) c2);
-}
-
-
-/* Routines to write data to output file */
-
-static void
-write_1_byte (int c)
-{
- PUTBYTE(c);
-}
-
-static void
-write_2_bytes (unsigned int val)
-{
- PUTBYTE((val >> 8) & 0xFF);
- PUTBYTE(val & 0xFF);
-}
-
-static void
-write_marker (int marker)
-{
- PUTBYTE(0xFF);
- PUTBYTE(marker);
-}
-
-static void
-copy_rest_of_file (void)
-{
- int c;
-
- while ((c = NEXTBYTE()) != EOF)
- PUTBYTE(c);
-}
-
-
-/*
- * JPEG markers consist of one or more 0xFF bytes, followed by a marker
- * code byte (which is not an FF). Here are the marker codes of interest
- * in this program. (See jdmarker.c for a more complete list.)
- */
-
-#define M_SOF0 0xC0 /* Start Of Frame N */
-#define M_SOF1 0xC1 /* N indicates which compression process */
-#define M_SOF2 0xC2 /* Only SOF0-SOF2 are now in common use */
-#define M_SOF3 0xC3
-#define M_SOF5 0xC5 /* NB: codes C4 and CC are NOT SOF markers */
-#define M_SOF6 0xC6
-#define M_SOF7 0xC7
-#define M_SOF9 0xC9
-#define M_SOF10 0xCA
-#define M_SOF11 0xCB
-#define M_SOF13 0xCD
-#define M_SOF14 0xCE
-#define M_SOF15 0xCF
-#define M_SOI 0xD8 /* Start Of Image (beginning of datastream) */
-#define M_EOI 0xD9 /* End Of Image (end of datastream) */
-#define M_SOS 0xDA /* Start Of Scan (begins compressed data) */
-#define M_COM 0xFE /* COMment */
-
-
-/*
- * Find the next JPEG marker and return its marker code.
- * We expect at least one FF byte, possibly more if the compressor used FFs
- * to pad the file. (Padding FFs will NOT be replicated in the output file.)
- * There could also be non-FF garbage between markers. The treatment of such
- * garbage is unspecified; we choose to skip over it but emit a warning msg.
- * NB: this routine must not be used after seeing SOS marker, since it will
- * not deal correctly with FF/00 sequences in the compressed image data...
- */
-
-static int
-next_marker (void)
-{
- int c;
- int discarded_bytes = 0;
-
- /* Find 0xFF byte; count and skip any non-FFs. */
- c = read_1_byte();
- while (c != 0xFF) {
- discarded_bytes++;
- c = read_1_byte();
- }
- /* Get marker code byte, swallowing any duplicate FF bytes. Extra FFs
- * are legal as pad bytes, so don't count them in discarded_bytes.
- */
- do {
- c = read_1_byte();
- } while (c == 0xFF);
-
- if (discarded_bytes != 0) {
- fprintf(stderr, "Warning: garbage data found in JPEG file\n");
- }
-
- return c;
-}
-
-
-/*
- * Read the initial marker, which should be SOI.
- * For a JFIF file, the first two bytes of the file should be literally
- * 0xFF M_SOI. To be more general, we could use next_marker, but if the
- * input file weren't actually JPEG at all, next_marker might read the whole
- * file and then return a misleading error message...
- */
-
-static int
-first_marker (void)
-{
- int c1, c2;
-
- c1 = NEXTBYTE();
- c2 = NEXTBYTE();
- if (c1 != 0xFF || c2 != M_SOI)
- ERREXIT("Not a JPEG file");
- return c2;
-}
-
-
-/*
- * Most types of marker are followed by a variable-length parameter segment.
- * This routine skips over the parameters for any marker we don't otherwise
- * want to process.
- * Note that we MUST skip the parameter segment explicitly in order not to
- * be fooled by 0xFF bytes that might appear within the parameter segment;
- * such bytes do NOT introduce new markers.
- */
-
-static void
-copy_variable (void)
-/* Copy an unknown or uninteresting variable-length marker */
-{
- unsigned int length;
-
- /* Get the marker parameter length count */
- length = read_2_bytes();
- write_2_bytes(length);
- /* Length includes itself, so must be at least 2 */
- if (length < 2)
- ERREXIT("Erroneous JPEG marker length");
- length -= 2;
- /* Skip over the remaining bytes */
- while (length > 0) {
- write_1_byte(read_1_byte());
- length--;
- }
-}
-
-static void
-skip_variable (void)
-/* Skip over an unknown or uninteresting variable-length marker */
-{
- unsigned int length;
-
- /* Get the marker parameter length count */
- length = read_2_bytes();
- /* Length includes itself, so must be at least 2 */
- if (length < 2)
- ERREXIT("Erroneous JPEG marker length");
- length -= 2;
- /* Skip over the remaining bytes */
- while (length > 0) {
- (void) read_1_byte();
- length--;
- }
-}
-
-
-/*
- * Parse the marker stream until SOFn or EOI is seen;
- * copy data to output, but discard COM markers unless keep_COM is true.
- */
-
-static int
-scan_JPEG_header (int keep_COM)
-{
- int marker;
-
- /* Expect SOI at start of file */
- if (first_marker() != M_SOI)
- ERREXIT("Expected SOI marker first");
- write_marker(M_SOI);
-
- /* Scan miscellaneous markers until we reach SOFn. */
- for (;;) {
- marker = next_marker();
- switch (marker) {
- /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be,
- * treated as SOFn. C4 in particular is actually DHT.
- */
- case M_SOF0: /* Baseline */
- case M_SOF1: /* Extended sequential, Huffman */
- case M_SOF2: /* Progressive, Huffman */
- case M_SOF3: /* Lossless, Huffman */
- case M_SOF5: /* Differential sequential, Huffman */
- case M_SOF6: /* Differential progressive, Huffman */
- case M_SOF7: /* Differential lossless, Huffman */
- case M_SOF9: /* Extended sequential, arithmetic */
- case M_SOF10: /* Progressive, arithmetic */
- case M_SOF11: /* Lossless, arithmetic */
- case M_SOF13: /* Differential sequential, arithmetic */
- case M_SOF14: /* Differential progressive, arithmetic */
- case M_SOF15: /* Differential lossless, arithmetic */
- return marker;
-
- case M_SOS: /* should not see compressed data before SOF */
- ERREXIT("SOS without prior SOFn");
- break;
-
- case M_EOI: /* in case it's a tables-only JPEG stream */
- return marker;
-
- case M_COM: /* Existing COM: conditionally discard */
- if (keep_COM) {
- write_marker(marker);
- copy_variable();
- } else {
- skip_variable();
- }
- break;
-
- default: /* Anything else just gets copied */
- write_marker(marker);
- copy_variable(); /* we assume it has a parameter count... */
- break;
- }
- } /* end loop */
-}
-
-
-/* Command line parsing code */
-
-static const char * progname; /* program name for error messages */
-
-
-static void
-usage (void)
-/* complain about bad command line */
-{
- fprintf(stderr, "wrjpgcom inserts a textual comment in a JPEG file.\n");
- fprintf(stderr, "You can add to or replace any existing comment(s).\n");
-
- fprintf(stderr, "Usage: %s [switches] ", progname);
-#ifdef TWO_FILE_COMMANDLINE
- fprintf(stderr, "inputfile outputfile\n");
-#else
- fprintf(stderr, "[inputfile]\n");
-#endif
-
- fprintf(stderr, "Switches (names may be abbreviated):\n");
- fprintf(stderr, " -replace Delete any existing comments\n");
- fprintf(stderr, " -comment \"text\" Insert comment with given text\n");
- fprintf(stderr, " -cfile name Read comment from named file\n");
- fprintf(stderr, "Notice that you must put quotes around the comment text\n");
- fprintf(stderr, "when you use -comment.\n");
- fprintf(stderr, "If you do not give either -comment or -cfile on the command line,\n");
- fprintf(stderr, "then the comment text is read from standard input.\n");
- fprintf(stderr, "It can be multiple lines, up to %u characters total.\n",
- (unsigned int) MAX_COM_LENGTH);
-#ifndef TWO_FILE_COMMANDLINE
- fprintf(stderr, "You must specify an input JPEG file name when supplying\n");
- fprintf(stderr, "comment text from standard input.\n");
-#endif
-
- exit(EXIT_FAILURE);
-}
-
-
-static int
-keymatch (char * arg, const char * keyword, int minchars)
-/* Case-insensitive matching of (possibly abbreviated) keyword switches. */
-/* keyword is the constant keyword (must be lower case already), */
-/* minchars is length of minimum legal abbreviation. */
-{
- register int ca, ck;
- register int nmatched = 0;
-
- while ((ca = *arg++) != '\0') {
- if ((ck = *keyword++) == '\0')
- return 0; /* arg longer than keyword, no good */
- if (isupper(ca)) /* force arg to lcase (assume ck is already) */
- ca = tolower(ca);
- if (ca != ck)
- return 0; /* no good */
- nmatched++; /* count matched characters */
- }
- /* reached end of argument; fail if it's too short for unique abbrev */
- if (nmatched < minchars)
- return 0;
- return 1; /* A-OK */
-}
-
-
-/*
- * The main program.
- */
-
-int
-main (int argc, char **argv)
-{
- int argn;
- char * arg;
- int keep_COM = 1;
- char * comment_arg = NULL;
- FILE * comment_file = NULL;
- unsigned int comment_length = 0;
- int marker;
-
- /* On Mac, fetch a command line. */
-#ifdef USE_CCOMMAND
- argc = ccommand(&argv);
-#endif
-
- progname = argv[0];
- if (progname == NULL || progname[0] == 0)
- progname = "wrjpgcom"; /* in case C library doesn't provide it */
-
- /* Parse switches, if any */
- for (argn = 1; argn < argc; argn++) {
- arg = argv[argn];
- if (arg[0] != '-')
- break; /* not switch, must be file name */
- arg++; /* advance over '-' */
- if (keymatch(arg, "replace", 1)) {
- keep_COM = 0;
- } else if (keymatch(arg, "cfile", 2)) {
- if (++argn >= argc) usage();
- if ((comment_file = fopen(argv[argn], "r")) == NULL) {
- fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
- exit(EXIT_FAILURE);
- }
- } else if (keymatch(arg, "comment", 1)) {
- if (++argn >= argc) usage();
- comment_arg = argv[argn];
- /* If the comment text starts with '"', then we are probably running
- * under MS-DOG and must parse out the quoted string ourselves. Sigh.
- */
- if (comment_arg[0] == '"') {
- comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH);
- if (comment_arg == NULL)
- ERREXIT("Insufficient memory");
- strcpy(comment_arg, argv[argn]+1);
- for (;;) {
- comment_length = (unsigned int) strlen(comment_arg);
- if (comment_length > 0 && comment_arg[comment_length-1] == '"') {
- comment_arg[comment_length-1] = '\0'; /* zap terminating quote */
- break;
- }
- if (++argn >= argc)
- ERREXIT("Missing ending quote mark");
- strcat(comment_arg, " ");
- strcat(comment_arg, argv[argn]);
- }
- }
- comment_length = (unsigned int) strlen(comment_arg);
- } else
- usage();
- }
-
- /* Cannot use both -comment and -cfile. */
- if (comment_arg != NULL && comment_file != NULL)
- usage();
- /* If there is neither -comment nor -cfile, we will read the comment text
- * from stdin; in this case there MUST be an input JPEG file name.
- */
- if (comment_arg == NULL && comment_file == NULL && argn >= argc)
- usage();
-
- /* Open the input file. */
- if (argn < argc) {
- if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) {
- fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
- exit(EXIT_FAILURE);
- }
- } else {
- /* default input file is stdin */
-#ifdef USE_SETMODE /* need to hack file mode? */
- setmode(fileno(stdin), O_BINARY);
-#endif
-#ifdef USE_FDOPEN /* need to re-open in binary mode? */
- if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) {
- fprintf(stderr, "%s: can't open stdin\n", progname);
- exit(EXIT_FAILURE);
- }
-#else
- infile = stdin;
-#endif
- }
-
- /* Open the output file. */
-#ifdef TWO_FILE_COMMANDLINE
- /* Must have explicit output file name */
- if (argn != argc-2) {
- fprintf(stderr, "%s: must name one input and one output file\n",
- progname);
- usage();
- }
- if ((outfile = fopen(argv[argn+1], WRITE_BINARY)) == NULL) {
- fprintf(stderr, "%s: can't open %s\n", progname, argv[argn+1]);
- exit(EXIT_FAILURE);
- }
-#else
- /* Unix style: expect zero or one file name */
- if (argn < argc-1) {
- fprintf(stderr, "%s: only one input file\n", progname);
- usage();
- }
- /* default output file is stdout */
-#ifdef USE_SETMODE /* need to hack file mode? */
- setmode(fileno(stdout), O_BINARY);
-#endif
-#ifdef USE_FDOPEN /* need to re-open in binary mode? */
- if ((outfile = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) {
- fprintf(stderr, "%s: can't open stdout\n", progname);
- exit(EXIT_FAILURE);
- }
-#else
- outfile = stdout;
-#endif
-#endif /* TWO_FILE_COMMANDLINE */
-
- /* Collect comment text from comment_file or stdin, if necessary */
- if (comment_arg == NULL) {
- FILE * src_file;
- int c;
-
- comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH);
- if (comment_arg == NULL)
- ERREXIT("Insufficient memory");
- comment_length = 0;
- src_file = (comment_file != NULL ? comment_file : stdin);
- while ((c = getc(src_file)) != EOF) {
- if (comment_length >= (unsigned int) MAX_COM_LENGTH) {
- fprintf(stderr, "Comment text may not exceed %u bytes\n",
- (unsigned int) MAX_COM_LENGTH);
- exit(EXIT_FAILURE);
- }
- comment_arg[comment_length++] = (char) c;
- }
- if (comment_file != NULL)
- fclose(comment_file);
- }
-
- /* Copy JPEG headers until SOFn marker;
- * we will insert the new comment marker just before SOFn.
- * This (a) causes the new comment to appear after, rather than before,
- * existing comments; and (b) ensures that comments come after any JFIF
- * or JFXX markers, as required by the JFIF specification.
- */
- marker = scan_JPEG_header(keep_COM);
- /* Insert the new COM marker, but only if nonempty text has been supplied */
- if (comment_length > 0) {
- write_marker(M_COM);
- write_2_bytes(comment_length + 2);
- while (comment_length > 0) {
- write_1_byte(*comment_arg++);
- comment_length--;
- }
- }
- /* Duplicate the remainder of the source file.
- * Note that any COM markers occuring after SOF will not be touched.
- */
- write_marker(marker);
- copy_rest_of_file();
-
- /* All done. */
- exit(EXIT_SUCCESS);
- return 0; /* suppress no-return-value warnings */
-}
diff --git a/libjpegtwrp/wrppm.c b/libjpegtwrp/wrppm.c
deleted file mode 100644
index 6c6d90881..000000000
--- a/libjpegtwrp/wrppm.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * wrppm.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to write output images in PPM/PGM format.
- * The extended 2-byte-per-sample raw PPM/PGM formats are supported.
- * The PBMPLUS library is NOT required to compile this software
- * (but it is highly useful as a set of PPM image manipulation programs).
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications. As they stand, they assume output to
- * an ordinary stdio stream.
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-
-#ifdef PPM_SUPPORTED
-
-
-/*
- * For 12-bit JPEG data, we either downscale the values to 8 bits
- * (to write standard byte-per-sample PPM/PGM files), or output
- * nonstandard word-per-sample PPM/PGM files. Downscaling is done
- * if PPM_NORAWWORD is defined (this can be done in the Makefile
- * or in jconfig.h).
- * (When the core library supports data precision reduction, a cleaner
- * implementation will be to ask for that instead.)
- */
-
-#if BITS_IN_JSAMPLE == 8
-#define PUTPPMSAMPLE(ptr,v) *ptr++ = (char) (v)
-#define BYTESPERSAMPLE 1
-#define PPM_MAXVAL 255
-#else
-#ifdef PPM_NORAWWORD
-#define PUTPPMSAMPLE(ptr,v) *ptr++ = (char) ((v) >> (BITS_IN_JSAMPLE-8))
-#define BYTESPERSAMPLE 1
-#define PPM_MAXVAL 255
-#else
-/* The word-per-sample format always puts the LSB first. */
-#define PUTPPMSAMPLE(ptr,v) \
- { register int val_ = v; \
- *ptr++ = (char) (val_ & 0xFF); \
- *ptr++ = (char) ((val_ >> 8) & 0xFF); \
- }
-#define BYTESPERSAMPLE 2
-#define PPM_MAXVAL ((1<<BITS_IN_JSAMPLE)-1)
-#endif
-#endif
-
-
-/*
- * When JSAMPLE is the same size as char, we can just fwrite() the
- * decompressed data to the PPM or PGM file. On PCs, in order to make this
- * work the output buffer must be allocated in near data space, because we are
- * assuming small-data memory model wherein fwrite() can't reach far memory.
- * If you need to process very wide images on a PC, you might have to compile
- * in large-memory model, or else replace fwrite() with a putc() loop ---
- * which will be much slower.
- */
-
-
-/* Private version of data destination object */
-
-typedef struct {
- struct djpeg_dest_struct pub; /* public fields */
-
- /* Usually these two pointers point to the same place: */
- char *iobuffer; /* fwrite's I/O buffer */
- JSAMPROW pixrow; /* decompressor output buffer */
- size_t buffer_width; /* width of I/O buffer */
- JDIMENSION samples_per_row; /* JSAMPLEs per output row */
-} ppm_dest_struct;
-
-typedef ppm_dest_struct * ppm_dest_ptr;
-
-
-/*
- * Write some pixel data.
- * In this module rows_supplied will always be 1.
- *
- * put_pixel_rows handles the "normal" 8-bit case where the decompressor
- * output buffer is physically the same as the fwrite buffer.
- */
-
-METHODDEF(void)
-put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
- JDIMENSION rows_supplied)
-{
- ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
-
- (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
-}
-
-
-/*
- * This code is used when we have to copy the data and apply a pixel
- * format translation. Typically this only happens in 12-bit mode.
- */
-
-METHODDEF(void)
-copy_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
- JDIMENSION rows_supplied)
-{
- ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
- register char * bufferptr;
- register JSAMPROW ptr;
- register JDIMENSION col;
-
- ptr = dest->pub.buffer[0];
- bufferptr = dest->iobuffer;
- for (col = dest->samples_per_row; col > 0; col--) {
- PUTPPMSAMPLE(bufferptr, GETJSAMPLE(*ptr++));
- }
- (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
-}
-
-
-/*
- * Write some pixel data when color quantization is in effect.
- * We have to demap the color index values to straight data.
- */
-
-METHODDEF(void)
-put_demapped_rgb (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
- JDIMENSION rows_supplied)
-{
- ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
- register char * bufferptr;
- register int pixval;
- register JSAMPROW ptr;
- register JSAMPROW color_map0 = cinfo->colormap[0];
- register JSAMPROW color_map1 = cinfo->colormap[1];
- register JSAMPROW color_map2 = cinfo->colormap[2];
- register JDIMENSION col;
-
- ptr = dest->pub.buffer[0];
- bufferptr = dest->iobuffer;
- for (col = cinfo->output_width; col > 0; col--) {
- pixval = GETJSAMPLE(*ptr++);
- PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map0[pixval]));
- PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map1[pixval]));
- PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map2[pixval]));
- }
- (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
-}
-
-
-METHODDEF(void)
-put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
- JDIMENSION rows_supplied)
-{
- ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
- register char * bufferptr;
- register JSAMPROW ptr;
- register JSAMPROW color_map = cinfo->colormap[0];
- register JDIMENSION col;
-
- ptr = dest->pub.buffer[0];
- bufferptr = dest->iobuffer;
- for (col = cinfo->output_width; col > 0; col--) {
- PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map[GETJSAMPLE(*ptr++)]));
- }
- (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
-}
-
-
-/*
- * Startup: write the file header.
- */
-
-METHODDEF(void)
-start_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
- ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
-
- /* Emit file header */
- switch (cinfo->out_color_space) {
- case JCS_GRAYSCALE:
- /* emit header for raw PGM format */
- fprintf(dest->pub.output_file, "P5\n%ld %ld\n%d\n",
- (long) cinfo->output_width, (long) cinfo->output_height,
- PPM_MAXVAL);
- break;
- case JCS_RGB:
- /* emit header for raw PPM format */
- fprintf(dest->pub.output_file, "P6\n%ld %ld\n%d\n",
- (long) cinfo->output_width, (long) cinfo->output_height,
- PPM_MAXVAL);
- break;
- default:
- ERREXIT(cinfo, JERR_PPM_COLORSPACE);
- }
-}
-
-
-/*
- * Finish up at the end of the file.
- */
-
-METHODDEF(void)
-finish_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
- /* Make sure we wrote the output file OK */
- fflush(dinfo->output_file);
- if (ferror(dinfo->output_file))
- ERREXIT(cinfo, JERR_FILE_WRITE);
-}
-
-
-/*
- * The module selection routine for PPM format output.
- */
-
-GLOBAL(djpeg_dest_ptr)
-jinit_write_ppm (j_decompress_ptr cinfo)
-{
- ppm_dest_ptr dest;
-
- /* Create module interface object, fill in method pointers */
- dest = (ppm_dest_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(ppm_dest_struct));
- dest->pub.start_output = start_output_ppm;
- dest->pub.finish_output = finish_output_ppm;
-
- /* Calculate output image dimensions so we can allocate space */
- jpeg_calc_output_dimensions(cinfo);
-
- /* Create physical I/O buffer. Note we make this near on a PC. */
- dest->samples_per_row = cinfo->output_width * cinfo->out_color_components;
- dest->buffer_width = dest->samples_per_row * (BYTESPERSAMPLE * SIZEOF(char));
- dest->iobuffer = (char *) (*cinfo->mem->alloc_small)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width);
-
- if (cinfo->quantize_colors || BITS_IN_JSAMPLE != 8 ||
- SIZEOF(JSAMPLE) != SIZEOF(char)) {
- /* When quantizing, we need an output buffer for colormap indexes
- * that's separate from the physical I/O buffer. We also need a
- * separate buffer if pixel format translation must take place.
- */
- dest->pub.buffer = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- cinfo->output_width * cinfo->output_components, (JDIMENSION) 1);
- dest->pub.buffer_height = 1;
- if (! cinfo->quantize_colors)
- dest->pub.put_pixel_rows = copy_pixel_rows;
- else if (cinfo->out_color_space == JCS_GRAYSCALE)
- dest->pub.put_pixel_rows = put_demapped_gray;
- else
- dest->pub.put_pixel_rows = put_demapped_rgb;
- } else {
- /* We will fwrite() directly from decompressor output buffer. */
- /* Synthesize a JSAMPARRAY pointer structure */
- /* Cast here implies near->far pointer conversion on PCs */
- dest->pixrow = (JSAMPROW) dest->iobuffer;
- dest->pub.buffer = & dest->pixrow;
- dest->pub.buffer_height = 1;
- dest->pub.put_pixel_rows = put_pixel_rows;
- }
-
- return (djpeg_dest_ptr) dest;
-}
-
-#endif /* PPM_SUPPORTED */
diff --git a/libjpegtwrp/wrrle.c b/libjpegtwrp/wrrle.c
deleted file mode 100644
index a4e73372d..000000000
--- a/libjpegtwrp/wrrle.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * wrrle.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to write output images in RLE format.
- * The Utah Raster Toolkit library is required (version 3.1 or later).
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications. As they stand, they assume output to
- * an ordinary stdio stream.
- *
- * Based on code contributed by Mike Lijewski,
- * with updates from Robert Hutchinson.
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-
-#ifdef RLE_SUPPORTED
-
-/* rle.h is provided by the Utah Raster Toolkit. */
-
-#include <rle.h>
-
-/*
- * We assume that JSAMPLE has the same representation as rle_pixel,
- * to wit, "unsigned char". Hence we can't cope with 12- or 16-bit samples.
- */
-
-#if BITS_IN_JSAMPLE != 8
- Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
-#endif
-
-
-/*
- * Since RLE stores scanlines bottom-to-top, we have to invert the image
- * from JPEG's top-to-bottom order. To do this, we save the outgoing data
- * in a virtual array during put_pixel_row calls, then actually emit the
- * RLE file during finish_output.
- */
-
-
-/*
- * For now, if we emit an RLE color map then it is always 256 entries long,
- * though not all of the entries need be used.
- */
-
-#define CMAPBITS 8
-#define CMAPLENGTH (1<<(CMAPBITS))
-
-typedef struct {
- struct djpeg_dest_struct pub; /* public fields */
-
- jvirt_sarray_ptr image; /* virtual array to store the output image */
- rle_map *colormap; /* RLE-style color map, or NULL if none */
- rle_pixel **rle_row; /* To pass rows to rle_putrow() */
-
-} rle_dest_struct;
-
-typedef rle_dest_struct * rle_dest_ptr;
-
-/* Forward declarations */
-METHODDEF(void) rle_put_pixel_rows
- JPP((j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
- JDIMENSION rows_supplied));
-
-
-/*
- * Write the file header.
- *
- * In this module it's easier to wait till finish_output to write anything.
- */
-
-METHODDEF(void)
-start_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
- rle_dest_ptr dest = (rle_dest_ptr) dinfo;
- size_t cmapsize;
- int i, ci;
-#ifdef PROGRESS_REPORT
- cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-#endif
-
- /*
- * Make sure the image can be stored in RLE format.
- *
- * - RLE stores image dimensions as *signed* 16 bit integers. JPEG
- * uses unsigned, so we have to check the width.
- *
- * - Colorspace is expected to be grayscale or RGB.
- *
- * - The number of channels (components) is expected to be 1 (grayscale/
- * pseudocolor) or 3 (truecolor/directcolor).
- * (could be 2 or 4 if using an alpha channel, but we aren't)
- */
-
- if (cinfo->output_width > 32767 || cinfo->output_height > 32767)
- ERREXIT2(cinfo, JERR_RLE_DIMENSIONS, cinfo->output_width,
- cinfo->output_height);
-
- if (cinfo->out_color_space != JCS_GRAYSCALE &&
- cinfo->out_color_space != JCS_RGB)
- ERREXIT(cinfo, JERR_RLE_COLORSPACE);
-
- if (cinfo->output_components != 1 && cinfo->output_components != 3)
- ERREXIT1(cinfo, JERR_RLE_TOOMANYCHANNELS, cinfo->num_components);
-
- /* Convert colormap, if any, to RLE format. */
-
- dest->colormap = NULL;
-
- if (cinfo->quantize_colors) {
- /* Allocate storage for RLE-style cmap, zero any extra entries */
- cmapsize = cinfo->out_color_components * CMAPLENGTH * SIZEOF(rle_map);
- dest->colormap = (rle_map *) (*cinfo->mem->alloc_small)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, cmapsize);
- MEMZERO(dest->colormap, cmapsize);
-
- /* Save away data in RLE format --- note 8-bit left shift! */
- /* Shifting would need adjustment for JSAMPLEs wider than 8 bits. */
- for (ci = 0; ci < cinfo->out_color_components; ci++) {
- for (i = 0; i < cinfo->actual_number_of_colors; i++) {
- dest->colormap[ci * CMAPLENGTH + i] =
- GETJSAMPLE(cinfo->colormap[ci][i]) << 8;
- }
- }
- }
-
- /* Set the output buffer to the first row */
- dest->pub.buffer = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, dest->image, (JDIMENSION) 0, (JDIMENSION) 1, TRUE);
- dest->pub.buffer_height = 1;
-
- dest->pub.put_pixel_rows = rle_put_pixel_rows;
-
-#ifdef PROGRESS_REPORT
- if (progress != NULL) {
- progress->total_extra_passes++; /* count file writing as separate pass */
- }
-#endif
-}
-
-
-/*
- * Write some pixel data.
- *
- * This routine just saves the data away in a virtual array.
- */
-
-METHODDEF(void)
-rle_put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
- JDIMENSION rows_supplied)
-{
- rle_dest_ptr dest = (rle_dest_ptr) dinfo;
-
- if (cinfo->output_scanline < cinfo->output_height) {
- dest->pub.buffer = (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, dest->image,
- cinfo->output_scanline, (JDIMENSION) 1, TRUE);
- }
-}
-
-/*
- * Finish up at the end of the file.
- *
- * Here is where we really output the RLE file.
- */
-
-METHODDEF(void)
-finish_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
- rle_dest_ptr dest = (rle_dest_ptr) dinfo;
- rle_hdr header; /* Output file information */
- rle_pixel **rle_row, *red, *green, *blue;
- JSAMPROW output_row;
- char cmapcomment[80];
- int row, col;
- int ci;
-#ifdef PROGRESS_REPORT
- cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-#endif
-
- /* Initialize the header info */
- header = *rle_hdr_init(NULL);
- header.rle_file = dest->pub.output_file;
- header.xmin = 0;
- header.xmax = cinfo->output_width - 1;
- header.ymin = 0;
- header.ymax = cinfo->output_height - 1;
- header.alpha = 0;
- header.ncolors = cinfo->output_components;
- for (ci = 0; ci < cinfo->output_components; ci++) {
- RLE_SET_BIT(header, ci);
- }
- if (cinfo->quantize_colors) {
- header.ncmap = cinfo->out_color_components;
- header.cmaplen = CMAPBITS;
- header.cmap = dest->colormap;
- /* Add a comment to the output image with the true colormap length. */
- sprintf(cmapcomment, "color_map_length=%d", cinfo->actual_number_of_colors);
- rle_putcom(cmapcomment, &header);
- }
-
- /* Emit the RLE header and color map (if any) */
- rle_put_setup(&header);
-
- /* Now output the RLE data from our virtual array.
- * We assume here that (a) rle_pixel is represented the same as JSAMPLE,
- * and (b) we are not on a machine where FAR pointers differ from regular.
- */
-
-#ifdef PROGRESS_REPORT
- if (progress != NULL) {
- progress->pub.pass_limit = cinfo->output_height;
- progress->pub.pass_counter = 0;
- (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
- }
-#endif
-
- if (cinfo->output_components == 1) {
- for (row = cinfo->output_height-1; row >= 0; row--) {
- rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, dest->image,
- (JDIMENSION) row, (JDIMENSION) 1, FALSE);
- rle_putrow(rle_row, (int) cinfo->output_width, &header);
-#ifdef PROGRESS_REPORT
- if (progress != NULL) {
- progress->pub.pass_counter++;
- (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
- }
-#endif
- }
- } else {
- for (row = cinfo->output_height-1; row >= 0; row--) {
- rle_row = (rle_pixel **) dest->rle_row;
- output_row = * (*cinfo->mem->access_virt_sarray)
- ((j_common_ptr) cinfo, dest->image,
- (JDIMENSION) row, (JDIMENSION) 1, FALSE);
- red = rle_row[0];
- green = rle_row[1];
- blue = rle_row[2];
- for (col = cinfo->output_width; col > 0; col--) {
- *red++ = GETJSAMPLE(*output_row++);
- *green++ = GETJSAMPLE(*output_row++);
- *blue++ = GETJSAMPLE(*output_row++);
- }
- rle_putrow(rle_row, (int) cinfo->output_width, &header);
-#ifdef PROGRESS_REPORT
- if (progress != NULL) {
- progress->pub.pass_counter++;
- (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
- }
-#endif
- }
- }
-
-#ifdef PROGRESS_REPORT
- if (progress != NULL)
- progress->completed_extra_passes++;
-#endif
-
- /* Emit file trailer */
- rle_puteof(&header);
- fflush(dest->pub.output_file);
- if (ferror(dest->pub.output_file))
- ERREXIT(cinfo, JERR_FILE_WRITE);
-}
-
-
-/*
- * The module selection routine for RLE format output.
- */
-
-GLOBAL(djpeg_dest_ptr)
-jinit_write_rle (j_decompress_ptr cinfo)
-{
- rle_dest_ptr dest;
-
- /* Create module interface object, fill in method pointers */
- dest = (rle_dest_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(rle_dest_struct));
- dest->pub.start_output = start_output_rle;
- dest->pub.finish_output = finish_output_rle;
-
- /* Calculate output image dimensions so we can allocate space */
- jpeg_calc_output_dimensions(cinfo);
-
- /* Allocate a work array for output to the RLE library. */
- dest->rle_row = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE,
- cinfo->output_width, (JDIMENSION) cinfo->output_components);
-
- /* Allocate a virtual array to hold the image. */
- dest->image = (*cinfo->mem->request_virt_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
- (JDIMENSION) (cinfo->output_width * cinfo->output_components),
- cinfo->output_height, (JDIMENSION) 1);
-
- return (djpeg_dest_ptr) dest;
-}
-
-#endif /* RLE_SUPPORTED */
diff --git a/libjpegtwrp/wrtarga.c b/libjpegtwrp/wrtarga.c
deleted file mode 100644
index cf104d2de..000000000
--- a/libjpegtwrp/wrtarga.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * wrtarga.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to write output images in Targa format.
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications. As they stand, they assume output to
- * an ordinary stdio stream.
- *
- * Based on code contributed by Lee Daniel Crocker.
- */
-
-#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
-
-#ifdef TARGA_SUPPORTED
-
-
-/*
- * To support 12-bit JPEG data, we'd have to scale output down to 8 bits.
- * This is not yet implemented.
- */
-
-#if BITS_IN_JSAMPLE != 8
- Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
-#endif
-
-/*
- * The output buffer needs to be writable by fwrite(). On PCs, we must
- * allocate the buffer in near data space, because we are assuming small-data
- * memory model, wherein fwrite() can't reach far memory. If you need to
- * process very wide images on a PC, you might have to compile in large-memory
- * model, or else replace fwrite() with a putc() loop --- which will be much
- * slower.
- */
-
-
-/* Private version of data destination object */
-
-typedef struct {
- struct djpeg_dest_struct pub; /* public fields */
-
- char *iobuffer; /* physical I/O buffer */
- JDIMENSION buffer_width; /* width of one row */
-} tga_dest_struct;
-
-typedef tga_dest_struct * tga_dest_ptr;
-
-
-LOCAL(void)
-write_header (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, int num_colors)
-/* Create and write a Targa header */
-{
- char targaheader[18];
-
- /* Set unused fields of header to 0 */
- MEMZERO(targaheader, SIZEOF(targaheader));
-
- if (num_colors > 0) {
- targaheader[1] = 1; /* color map type 1 */
- targaheader[5] = (char) (num_colors & 0xFF);
- targaheader[6] = (char) (num_colors >> 8);
- targaheader[7] = 24; /* 24 bits per cmap entry */
- }
-
- targaheader[12] = (char) (cinfo->output_width & 0xFF);
- targaheader[13] = (char) (cinfo->output_width >> 8);
- targaheader[14] = (char) (cinfo->output_height & 0xFF);
- targaheader[15] = (char) (cinfo->output_height >> 8);
- targaheader[17] = 0x20; /* Top-down, non-interlaced */
-
- if (cinfo->out_color_space == JCS_GRAYSCALE) {
- targaheader[2] = 3; /* image type = uncompressed gray-scale */
- targaheader[16] = 8; /* bits per pixel */
- } else { /* must be RGB */
- if (num_colors > 0) {
- targaheader[2] = 1; /* image type = colormapped RGB */
- targaheader[16] = 8;
- } else {
- targaheader[2] = 2; /* image type = uncompressed RGB */
- targaheader[16] = 24;
- }
- }
-
- if (JFWRITE(dinfo->output_file, targaheader, 18) != (size_t) 18)
- ERREXIT(cinfo, JERR_FILE_WRITE);
-}
-
-
-/*
- * Write some pixel data.
- * In this module rows_supplied will always be 1.
- */
-
-METHODDEF(void)
-put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
- JDIMENSION rows_supplied)
-/* used for unquantized full-color output */
-{
- tga_dest_ptr dest = (tga_dest_ptr) dinfo;
- register JSAMPROW inptr;
- register char * outptr;
- register JDIMENSION col;
-
- inptr = dest->pub.buffer[0];
- outptr = dest->iobuffer;
- for (col = cinfo->output_width; col > 0; col--) {
- outptr[0] = (char) GETJSAMPLE(inptr[2]); /* RGB to BGR order */
- outptr[1] = (char) GETJSAMPLE(inptr[1]);
- outptr[2] = (char) GETJSAMPLE(inptr[0]);
- inptr += 3, outptr += 3;
- }
- (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
-}
-
-METHODDEF(void)
-put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
- JDIMENSION rows_supplied)
-/* used for grayscale OR quantized color output */
-{
- tga_dest_ptr dest = (tga_dest_ptr) dinfo;
- register JSAMPROW inptr;
- register char * outptr;
- register JDIMENSION col;
-
- inptr = dest->pub.buffer[0];
- outptr = dest->iobuffer;
- for (col = cinfo->output_width; col > 0; col--) {
- *outptr++ = (char) GETJSAMPLE(*inptr++);
- }
- (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
-}
-
-
-/*
- * Write some demapped pixel data when color quantization is in effect.
- * For Targa, this is only applied to grayscale data.
- */
-
-METHODDEF(void)
-put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
- JDIMENSION rows_supplied)
-{
- tga_dest_ptr dest = (tga_dest_ptr) dinfo;
- register JSAMPROW inptr;
- register char * outptr;
- register JSAMPROW color_map0 = cinfo->colormap[0];
- register JDIMENSION col;
-
- inptr = dest->pub.buffer[0];
- outptr = dest->iobuffer;
- for (col = cinfo->output_width; col > 0; col--) {
- *outptr++ = (char) GETJSAMPLE(color_map0[GETJSAMPLE(*inptr++)]);
- }
- (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
-}
-
-
-/*
- * Startup: write the file header.
- */
-
-METHODDEF(void)
-start_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
- tga_dest_ptr dest = (tga_dest_ptr) dinfo;
- int num_colors, i;
- FILE *outfile;
-
- if (cinfo->out_color_space == JCS_GRAYSCALE) {
- /* Targa doesn't have a mapped grayscale format, so we will */
- /* demap quantized gray output. Never emit a colormap. */
- write_header(cinfo, dinfo, 0);
- if (cinfo->quantize_colors)
- dest->pub.put_pixel_rows = put_demapped_gray;
- else
- dest->pub.put_pixel_rows = put_gray_rows;
- } else if (cinfo->out_color_space == JCS_RGB) {
- if (cinfo->quantize_colors) {
- /* We only support 8-bit colormap indexes, so only 256 colors */
- num_colors = cinfo->actual_number_of_colors;
- if (num_colors > 256)
- ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, num_colors);
- write_header(cinfo, dinfo, num_colors);
- /* Write the colormap. Note Targa uses BGR byte order */
- outfile = dest->pub.output_file;
- for (i = 0; i < num_colors; i++) {
- putc(GETJSAMPLE(cinfo->colormap[2][i]), outfile);
- putc(GETJSAMPLE(cinfo->colormap[1][i]), outfile);
- putc(GETJSAMPLE(cinfo->colormap[0][i]), outfile);
- }
- dest->pub.put_pixel_rows = put_gray_rows;
- } else {
- write_header(cinfo, dinfo, 0);
- dest->pub.put_pixel_rows = put_pixel_rows;
- }
- } else {
- ERREXIT(cinfo, JERR_TGA_COLORSPACE);
- }
-}
-
-
-/*
- * Finish up at the end of the file.
- */
-
-METHODDEF(void)
-finish_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
- /* Make sure we wrote the output file OK */
- fflush(dinfo->output_file);
- if (ferror(dinfo->output_file))
- ERREXIT(cinfo, JERR_FILE_WRITE);
-}
-
-
-/*
- * The module selection routine for Targa format output.
- */
-
-GLOBAL(djpeg_dest_ptr)
-jinit_write_targa (j_decompress_ptr cinfo)
-{
- tga_dest_ptr dest;
-
- /* Create module interface object, fill in method pointers */
- dest = (tga_dest_ptr)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- SIZEOF(tga_dest_struct));
- dest->pub.start_output = start_output_tga;
- dest->pub.finish_output = finish_output_tga;
-
- /* Calculate output image dimensions so we can allocate space */
- jpeg_calc_output_dimensions(cinfo);
-
- /* Create I/O buffer. Note we make this near on a PC. */
- dest->buffer_width = cinfo->output_width * cinfo->output_components;
- dest->iobuffer = (char *)
- (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
- (size_t) (dest->buffer_width * SIZEOF(char)));
-
- /* Create decompressor output buffer. */
- dest->pub.buffer = (*cinfo->mem->alloc_sarray)
- ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width, (JDIMENSION) 1);
- dest->pub.buffer_height = 1;
-
- return (djpeg_dest_ptr) dest;
-}
-
-#endif /* TARGA_SUPPORTED */