summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Android.mk3
-rw-r--r--bootloader.c249
-rw-r--r--bootloader.h16
-rw-r--r--common.h7
-rw-r--r--firmware.c132
-rw-r--r--firmware.h36
-rw-r--r--install.c91
-rw-r--r--recovery.c11
-rw-r--r--res/images/icon_firmware_error.pngbin8088 -> 0 bytes
-rwxr-xr-xres/images/icon_firmware_install.pngbin12717 -> 0 bytes
-rw-r--r--ui.c21
-rw-r--r--updater/install.c39
-rw-r--r--updater/updater.c9
-rw-r--r--updater/updater.h1
14 files changed, 16 insertions, 599 deletions
diff --git a/Android.mk b/Android.mk
index e89b2258c..5f7406466 100644
--- a/Android.mk
+++ b/Android.mk
@@ -9,7 +9,6 @@ commands_recovery_local_path := $(LOCAL_PATH)
LOCAL_SRC_FILES := \
recovery.c \
bootloader.c \
- firmware.c \
install.c \
roots.c \
ui.c \
@@ -22,7 +21,7 @@ LOCAL_MODULE := recovery
LOCAL_FORCE_STATIC_EXECUTABLE := true
-RECOVERY_API_VERSION := 2
+RECOVERY_API_VERSION := 3
LOCAL_CFLAGS += -DRECOVERY_API_VERSION=$(RECOVERY_API_VERSION)
# This binary is in the recovery ramdisk, which is otherwise a copy of root.
diff --git a/bootloader.c b/bootloader.c
index 61b24e918..38b5651bf 100644
--- a/bootloader.c
+++ b/bootloader.c
@@ -119,252 +119,3 @@ int set_bootloader_message(const struct bootloader_message *in) {
LOGI("Set boot command \"%s\"\n", in->command[0] != 255 ? in->command : "");
return 0;
}
-
-/* Update Image
- *
- * - will be stored in the "cache" partition
- * - bad blocks will be ignored, like boot.img and recovery.img
- * - the first block will be the image header (described below)
- * - the size is in BYTES, inclusive of the header
- * - offsets are in BYTES from the start of the update header
- * - two raw bitmaps will be included, the "busy" and "fail" bitmaps
- * - for dream, the bitmaps will be 320x480x16bpp RGB565
- */
-
-#define UPDATE_MAGIC "MSM-RADIO-UPDATE"
-#define UPDATE_MAGIC_SIZE 16
-#define UPDATE_VERSION 0x00010000
-
-struct update_header {
- unsigned char MAGIC[UPDATE_MAGIC_SIZE];
-
- unsigned version;
- unsigned size;
-
- unsigned image_offset;
- unsigned image_length;
-
- unsigned bitmap_width;
- unsigned bitmap_height;
- unsigned bitmap_bpp;
-
- unsigned busy_bitmap_offset;
- unsigned busy_bitmap_length;
-
- unsigned fail_bitmap_offset;
- unsigned fail_bitmap_length;
-};
-
-#define LOG_MAGIC "LOGmagic"
-#define LOG_MAGIC_SIZE 8
-
-int write_update_for_bootloader(
- const char *update, int update_length,
- int bitmap_width, int bitmap_height, int bitmap_bpp,
- const char *busy_bitmap, const char *fail_bitmap,
- const char *log_filename) {
- if (ensure_root_path_unmounted(CACHE_NAME)) {
- LOGE("Can't unmount %s\n", CACHE_NAME);
- return -1;
- }
-
- const MtdPartition *part = get_root_mtd_partition(CACHE_NAME);
- if (part == NULL) {
- LOGE("Can't find %s\n", CACHE_NAME);
- return -1;
- }
-
- MtdWriteContext *write = mtd_write_partition(part);
- if (write == NULL) {
- LOGE("Can't open %s\n(%s)\n", CACHE_NAME, strerror(errno));
- return -1;
- }
-
- /* Write an invalid (zero) header first, to disable any previous
- * update and any other structured contents (like a filesystem),
- * and as a placeholder for the amount of space required.
- */
-
- struct update_header header;
- memset(&header, 0, sizeof(header));
- const ssize_t header_size = sizeof(header);
- if (mtd_write_data(write, (char*) &header, header_size) != header_size) {
- LOGE("Can't write header to %s\n(%s)\n", CACHE_NAME, strerror(errno));
- mtd_write_close(write);
- return -1;
- }
-
- /* Write each section individually block-aligned, so we can write
- * each block independently without complicated buffering.
- */
-
- memcpy(&header.MAGIC, UPDATE_MAGIC, UPDATE_MAGIC_SIZE);
- header.version = UPDATE_VERSION;
- header.size = header_size;
-
- if (log_filename != NULL) {
- // Write 1 byte into the following block, then fill to the end
- // in order to reserve that block. We'll use the block to
- // send a copy of the log through to the next invocation of
- // recovery. We write the log as late as possible in order to
- // capture any messages emitted by this function.
- mtd_erase_blocks(write, 0);
- if (mtd_write_data(write, (char*) &header, 1) != 1) {
- LOGE("Can't write log block to %s\n(%s)\n",
- CACHE_NAME, strerror(errno));
- mtd_write_close(write);
- return -1;
- }
- }
-
- off_t image_start_pos = mtd_erase_blocks(write, 0);
- header.image_length = update_length;
- if ((int) header.image_offset == -1 ||
- mtd_write_data(write, update, update_length) != update_length) {
- LOGE("Can't write update to %s\n(%s)\n", CACHE_NAME, strerror(errno));
- mtd_write_close(write);
- return -1;
- }
- off_t busy_start_pos = mtd_erase_blocks(write, 0);
- header.image_offset = mtd_find_write_start(write, image_start_pos);
-
- header.bitmap_width = bitmap_width;
- header.bitmap_height = bitmap_height;
- header.bitmap_bpp = bitmap_bpp;
-
- int bitmap_length = (bitmap_bpp + 7) / 8 * bitmap_width * bitmap_height;
-
- header.busy_bitmap_length = busy_bitmap != NULL ? bitmap_length : 0;
- if ((int) header.busy_bitmap_offset == -1 ||
- mtd_write_data(write, busy_bitmap, bitmap_length) != bitmap_length) {
- LOGE("Can't write bitmap to %s\n(%s)\n", CACHE_NAME, strerror(errno));
- mtd_write_close(write);
- return -1;
- }
- off_t fail_start_pos = mtd_erase_blocks(write, 0);
- header.busy_bitmap_offset = mtd_find_write_start(write, busy_start_pos);
-
- header.fail_bitmap_length = fail_bitmap != NULL ? bitmap_length : 0;
- if ((int) header.fail_bitmap_offset == -1 ||
- mtd_write_data(write, fail_bitmap, bitmap_length) != bitmap_length) {
- LOGE("Can't write bitmap to %s\n(%s)\n", CACHE_NAME, strerror(errno));
- mtd_write_close(write);
- return -1;
- }
- mtd_erase_blocks(write, 0);
- header.fail_bitmap_offset = mtd_find_write_start(write, fail_start_pos);
-
- /* Write the header last, after all the blocks it refers to, so that
- * when the magic number is installed everything is valid.
- */
-
- if (mtd_write_close(write)) {
- LOGE("Can't finish writing %s\n(%s)\n", CACHE_NAME, strerror(errno));
- return -1;
- }
-
- write = mtd_write_partition(part);
- if (write == NULL) {
- LOGE("Can't reopen %s\n(%s)\n", CACHE_NAME, strerror(errno));
- return -1;
- }
-
- if (mtd_write_data(write, (char*) &header, header_size) != header_size) {
- LOGE("Can't rewrite header to %s\n(%s)\n", CACHE_NAME, strerror(errno));
- mtd_write_close(write);
- return -1;
- }
-
- if (log_filename != NULL) {
- size_t erase_size;
- if (mtd_partition_info(part, NULL, &erase_size, NULL) != 0) {
- LOGE("Error reading block size\n(%s)\n", strerror(errno));
- mtd_write_close(write);
- return -1;
- }
- mtd_erase_blocks(write, 0);
-
- if (erase_size > 0) {
- char* log = malloc(erase_size);
- FILE* f = fopen(log_filename, "rb");
- // The fseek() may fail if it tries to go before the
- // beginning of the log, but that's okay because we want
- // to be positioned at the start anyway.
- fseek(f, -(erase_size-sizeof(size_t)-LOG_MAGIC_SIZE), SEEK_END);
- memcpy(log, LOG_MAGIC, LOG_MAGIC_SIZE);
- size_t read = fread(log+sizeof(size_t)+LOG_MAGIC_SIZE,
- 1, erase_size-sizeof(size_t)-LOG_MAGIC_SIZE, f);
- LOGI("read %d bytes from log\n", (int)read);
- *(size_t *)(log + LOG_MAGIC_SIZE) = read;
- fclose(f);
- if (mtd_write_data(write, log, erase_size) != erase_size) {
- LOGE("failed to store log in cache partition\n(%s)\n",
- strerror(errno));
- mtd_write_close(write);
- }
- free(log);
- }
- }
-
- if (mtd_erase_blocks(write, 0) != image_start_pos) {
- LOGE("Misalignment rewriting %s\n(%s)\n", CACHE_NAME, strerror(errno));
- mtd_write_close(write);
- return -1;
- }
-
- if (mtd_write_close(write)) {
- LOGE("Can't finish header of %s\n(%s)\n", CACHE_NAME, strerror(errno));
- return -1;
- }
-
- return 0;
-}
-
-void recover_firmware_update_log() {
- printf("recovering log from before firmware update\n");
-
- const MtdPartition *part = get_root_mtd_partition(CACHE_NAME);
- if (part == NULL) {
- LOGE("Can't find %s\n", CACHE_NAME);
- return;
- }
-
- MtdReadContext* read = mtd_read_partition(part);
-
- size_t erase_size;
- if (mtd_partition_info(part, NULL, &erase_size, NULL) != 0) {
- LOGE("Error reading block size\n(%s)\n", strerror(errno));
- mtd_read_close(read);
- return;
- }
-
- char* buffer = malloc(erase_size);
- if (mtd_read_data(read, buffer, erase_size) != erase_size) {
- LOGE("Error reading header block\n(%s)\n", strerror(errno));
- mtd_read_close(read);
- free(buffer);
- return;
- }
- if (mtd_read_data(read, buffer, erase_size) != erase_size) {
- LOGE("Error reading log block\n(%s)\n", strerror(errno));
- mtd_read_close(read);
- free(buffer);
- return;
- }
- mtd_read_close(read);
-
- if (memcmp(buffer, LOG_MAGIC, LOG_MAGIC_SIZE) != 0) {
- LOGE("No log from before firmware install\n");
- free(buffer);
- return;
- }
-
- size_t log_size = *(size_t *)(buffer + LOG_MAGIC_SIZE);
- LOGI("header has %d bytes of log\n", (int)log_size);
-
- printf("\n###\n### START RECOVERED LOG\n###\n\n");
- fwrite(buffer + sizeof(size_t) + LOG_MAGIC_SIZE, 1, log_size, stdout);
- printf("\n\n###\n### END RECOVERED LOG\n###\n\n");
-
- free(buffer);
-}
diff --git a/bootloader.h b/bootloader.h
index fec6409ff..2e749aa12 100644
--- a/bootloader.h
+++ b/bootloader.h
@@ -47,20 +47,4 @@ struct bootloader_message {
int get_bootloader_message(struct bootloader_message *out);
int set_bootloader_message(const struct bootloader_message *in);
-/* Write an update to the cache partition for update-radio or update-hboot.
- * Note, this destroys any filesystem on the cache partition!
- * The expected bitmap format is 240x320, 16bpp (2Bpp), RGB 5:6:5.
- */
-int write_update_for_bootloader(
- const char *update, int update_len,
- int bitmap_width, int bitmap_height, int bitmap_bpp,
- const char *busy_bitmap, const char *error_bitmap,
- const char *log_filename);
-
-/* Look for a log stored in the cache partition in the block after the
- * firmware update header. If we can read such a log, copy it to
- * stdout (ie, the current log).
- */
-void recover_firmware_update_log();
-
#endif
diff --git a/common.h b/common.h
index d962a0a3f..ff577c259 100644
--- a/common.h
+++ b/common.h
@@ -49,17 +49,10 @@ enum {
BACKGROUND_ICON_NONE,
BACKGROUND_ICON_INSTALLING,
BACKGROUND_ICON_ERROR,
- BACKGROUND_ICON_FIRMWARE_INSTALLING,
- BACKGROUND_ICON_FIRMWARE_ERROR,
NUM_BACKGROUND_ICONS
};
void ui_set_background(int icon);
-// Get a malloc'd copy of the screen image showing (only) the specified icon.
-// Also returns the width, height, and bits per pixel of the returned image.
-// TODO: Use some sort of "struct Bitmap" here instead of all these variables?
-char *ui_copy_image(int icon, int *width, int *height, int *bpp);
-
// Show a progress bar and define the scope of the next operation:
// portion - fraction of the progress bar the next operation will use
// seconds - expected time interval (progress bar moves at this minimum rate)
diff --git a/firmware.c b/firmware.c
deleted file mode 100644
index 4c1a9a4a9..000000000
--- a/firmware.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright (C) 2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "bootloader.h"
-#include "common.h"
-#include "firmware.h"
-#include "roots.h"
-
-#include <errno.h>
-#include <string.h>
-#include <sys/reboot.h>
-
-static const char *update_type = NULL;
-static const char *update_data = NULL;
-static int update_length = 0;
-
-int remember_firmware_update(const char *type, const char *data, int length) {
- if (update_type != NULL || update_data != NULL) {
- LOGE("Multiple firmware images\n");
- return -1;
- }
-
- update_type = type;
- update_data = data;
- update_length = length;
- return 0;
-}
-
-// Return true if there is a firmware update pending.
-int firmware_update_pending() {
- return update_data != NULL && update_length > 0;
-}
-
-/* Bootloader / Recovery Flow
- *
- * On every boot, the bootloader will read the bootloader_message
- * from flash and check the command field. The bootloader should
- * deal with the command field not having a 0 terminator correctly
- * (so as to not crash if the block is invalid or corrupt).
- *
- * The bootloader will have to publish the partition that contains
- * the bootloader_message to the linux kernel so it can update it.
- *
- * if command == "boot-recovery" -> boot recovery.img
- * else if command == "update-radio" -> update radio image (below)
- * else if command == "update-hboot" -> update hboot image (below)
- * else -> boot boot.img (normal boot)
- *
- * Radio/Hboot Update Flow
- * 1. the bootloader will attempt to load and validate the header
- * 2. if the header is invalid, status="invalid-update", goto #8
- * 3. display the busy image on-screen
- * 4. if the update image is invalid, status="invalid-radio-image", goto #8
- * 5. attempt to update the firmware (depending on the command)
- * 6. if successful, status="okay", goto #8
- * 7. if failed, and the old image can still boot, status="failed-update"
- * 8. write the bootloader_message, leaving the recovery field
- * unchanged, updating status, and setting command to
- * "boot-recovery"
- * 9. reboot
- *
- * The bootloader will not modify or erase the cache partition.
- * It is recovery's responsibility to clean up the mess afterwards.
- */
-
-int maybe_install_firmware_update(const char *send_intent,
- const char *log_filename) {
- if (update_data == NULL || update_length == 0) return 0;
-
- /* We destroy the cache partition to pass the update image to the
- * bootloader, so all we can really do afterwards is wipe cache and reboot.
- * Set up this instruction now, in case we're interrupted while writing.
- */
-
- struct bootloader_message boot;
- memset(&boot, 0, sizeof(boot));
- strlcpy(boot.command, "boot-recovery", sizeof(boot.command));
- strlcpy(boot.recovery, "recovery\n--wipe_cache\n", sizeof(boot.command));
- if (send_intent != NULL) {
- strlcat(boot.recovery, "--send_intent=", sizeof(boot.recovery));
- strlcat(boot.recovery, send_intent, sizeof(boot.recovery));
- strlcat(boot.recovery, "\n", sizeof(boot.recovery));
- }
- if (set_bootloader_message(&boot)) return -1;
-
- int width = 0, height = 0, bpp = 0;
- char *busy_image = ui_copy_image(
- BACKGROUND_ICON_FIRMWARE_INSTALLING, &width, &height, &bpp);
- char *fail_image = ui_copy_image(
- BACKGROUND_ICON_FIRMWARE_ERROR, &width, &height, &bpp);
-
- ui_print("Writing %s image...\n", update_type);
- if (write_update_for_bootloader(
- update_data, update_length,
- width, height, bpp, busy_image, fail_image, log_filename)) {
- LOGE("Can't write %s image\n(%s)\n", update_type, strerror(errno));
- format_root_device("CACHE:"); // Attempt to clean cache up, at least.
- return -1;
- }
-
- free(busy_image);
- free(fail_image);
-
- /* The update image is fully written, so now we can instruct the bootloader
- * to install it. (After doing so, it will come back here, and we will
- * wipe the cache and reboot into the system.)
- */
- snprintf(boot.command, sizeof(boot.command), "update-%s", update_type);
- if (set_bootloader_message(&boot)) {
- format_root_device("CACHE:");
- return -1;
- }
-
- reboot(RB_AUTOBOOT);
-
- // Can't reboot? WTF?
- LOGE("Can't reboot\n");
- return -1;
-}
diff --git a/firmware.h b/firmware.h
deleted file mode 100644
index 04507bbf0..000000000
--- a/firmware.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (C) 2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef _RECOVERY_FIRMWARE_H
-#define _RECOVERY_FIRMWARE_H
-
-/* Save a radio or bootloader update image for later installation.
- * The type should be one of "hboot" or "radio".
- * Takes ownership of type and data. Returns nonzero on error.
- */
-int remember_firmware_update(const char *type, const char *data, int length);
-
-/* Returns true if a firmware update has been saved. */
-int firmware_update_pending();
-
-/* If an update was saved, reboot into the bootloader now to install it.
- * Returns 0 if no radio image was defined, nonzero on error,
- * doesn't return at all on success...
- */
-int maybe_install_firmware_update(const char *send_intent,
- const char *log_filename);
-
-#endif
diff --git a/install.c b/install.c
index bb9924a24..37a4f0770 100644
--- a/install.c
+++ b/install.c
@@ -32,71 +32,10 @@
#include "mtdutils/mtdutils.h"
#include "roots.h"
#include "verifier.h"
-#include "firmware.h"
#define ASSUMED_UPDATE_BINARY_NAME "META-INF/com/google/android/update-binary"
#define PUBLIC_KEYS_FILE "/res/keys"
-// The update binary ask us to install a firmware file on reboot. Set
-// that up. Takes ownership of type and filename.
-static int
-handle_firmware_update(char* type, char* filename, ZipArchive* zip) {
- unsigned int data_size;
- const ZipEntry* entry = NULL;
-
- if (strncmp(filename, "PACKAGE:", 8) == 0) {
- entry = mzFindZipEntry(zip, filename+8);
- if (entry == NULL) {
- LOGE("Failed to find \"%s\" in package", filename+8);
- return INSTALL_ERROR;
- }
- data_size = entry->uncompLen;
- } else {
- struct stat st_data;
- if (stat(filename, &st_data) < 0) {
- LOGE("Error stat'ing %s: %s\n", filename, strerror(errno));
- return INSTALL_ERROR;
- }
- data_size = st_data.st_size;
- }
-
- LOGI("type is %s; size is %d; file is %s\n",
- type, data_size, filename);
-
- char* data = malloc(data_size);
- if (data == NULL) {
- LOGI("Can't allocate %d bytes for firmware data\n", data_size);
- return INSTALL_ERROR;
- }
-
- if (entry) {
- if (mzReadZipEntry(zip, entry, data, data_size) == false) {
- LOGE("Failed to read \"%s\" from package", filename+8);
- return INSTALL_ERROR;
- }
- } else {
- FILE* f = fopen(filename, "rb");
- if (f == NULL) {
- LOGE("Failed to open %s: %s\n", filename, strerror(errno));
- return INSTALL_ERROR;
- }
- if (fread(data, 1, data_size, f) != data_size) {
- LOGE("Failed to read firmware data: %s\n", strerror(errno));
- return INSTALL_ERROR;
- }
- fclose(f);
- }
-
- if (remember_firmware_update(type, data, data_size)) {
- LOGE("Can't store %s image\n", type);
- free(data);
- return INSTALL_ERROR;
- }
- free(filename);
-
- return INSTALL_SUCCESS;
-}
-
// If the package contains an update binary, extract it and run it.
static int
try_update_binary(const char *path, ZipArchive *zip) {
@@ -145,9 +84,12 @@ try_update_binary(const char *path, ZipArchive *zip) {
//
// firmware <"hboot"|"radio"> <filename>
// arrange to install the contents of <filename> in the
- // given partition on reboot. (API v2: <filename> may
- // start with "PACKAGE:" to indicate taking a file from
- // the OTA package.)
+ // given partition on reboot.
+ //
+ // (API v2: <filename> may start with "PACKAGE:" to
+ // indicate taking a file from the OTA package.)
+ //
+ // (API v3: this command no longer exists.)
//
// ui_print <string>
// display <string> on the screen.
@@ -172,9 +114,6 @@ try_update_binary(const char *path, ZipArchive *zip) {
}
close(pipefd[1]);
- char* firmware_type = NULL;
- char* firmware_filename = NULL;
-
char buffer[1024];
FILE* from_child = fdopen(pipefd[0], "r");
while (fgets(buffer, sizeof(buffer), from_child) != NULL) {
@@ -194,18 +133,6 @@ try_update_binary(const char *path, ZipArchive *zip) {
char* fraction_s = strtok(NULL, " \n");
float fraction = strtof(fraction_s, NULL);
ui_set_progress(fraction);
- } else if (strcmp(command, "firmware") == 0) {
- char* type = strtok(NULL, " \n");
- char* filename = strtok(NULL, " \n");
-
- if (type != NULL && filename != NULL) {
- if (firmware_type != NULL) {
- LOGE("ignoring attempt to do multiple firmware updates");
- } else {
- firmware_type = strdup(type);
- firmware_filename = strdup(filename);
- }
- }
} else if (strcmp(command, "ui_print") == 0) {
char* str = strtok(NULL, "\n");
if (str) {
@@ -226,11 +153,7 @@ try_update_binary(const char *path, ZipArchive *zip) {
return INSTALL_ERROR;
}
- if (firmware_type != NULL) {
- return handle_firmware_update(firmware_type, firmware_filename, zip);
- } else {
- return INSTALL_SUCCESS;
- }
+ return INSTALL_SUCCESS;
}
static int
diff --git a/recovery.c b/recovery.c
index 73a54a23e..4c437e599 100644
--- a/recovery.c
+++ b/recovery.c
@@ -31,7 +31,6 @@
#include "bootloader.h"
#include "common.h"
#include "cutils/properties.h"
-#include "firmware.h"
#include "install.h"
#include "minui/minui.h"
#include "minzip/DirUtil.h"
@@ -445,12 +444,7 @@ prompt_and_wait() {
} else if (!ui_text_visible()) {
return; // reboot if logs aren't visible
} else {
- if (firmware_update_pending()) {
- ui_print("\nReboot via menu to complete\n"
- "installation.\n");
- } else {
- ui_print("\nInstall from sdcard complete.\n");
- }
+ ui_print("\nInstall from sdcard complete.\n");
}
break;
}
@@ -563,9 +557,6 @@ main(int argc, char **argv) {
if (status != INSTALL_SUCCESS) ui_set_background(BACKGROUND_ICON_ERROR);
if (status != INSTALL_SUCCESS || ui_text_visible()) prompt_and_wait();
- // If there is a radio image pending, reboot now to install it.
- maybe_install_firmware_update(send_intent, TEMPORARY_LOG_FILE);
-
// Otherwise, get ready to boot the main system...
finish_recovery(send_intent);
ui_print("Rebooting...\n");
diff --git a/res/images/icon_firmware_error.png b/res/images/icon_firmware_error.png
deleted file mode 100644
index 0c32c9ede..000000000
--- a/res/images/icon_firmware_error.png
+++ /dev/null
Binary files differ
diff --git a/res/images/icon_firmware_install.png b/res/images/icon_firmware_install.png
deleted file mode 100755
index 2da9e5ffe..000000000
--- a/res/images/icon_firmware_install.png
+++ /dev/null
Binary files differ
diff --git a/ui.c b/ui.c
index fdc09911b..01a005f80 100644
--- a/ui.c
+++ b/ui.c
@@ -47,10 +47,6 @@ static gr_surface gProgressBarFill;
static const struct { gr_surface* surface; const char *name; } BITMAPS[] = {
{ &gBackgroundIcon[BACKGROUND_ICON_INSTALLING], "icon_installing" },
{ &gBackgroundIcon[BACKGROUND_ICON_ERROR], "icon_error" },
- { &gBackgroundIcon[BACKGROUND_ICON_FIRMWARE_INSTALLING],
- "icon_firmware_install" },
- { &gBackgroundIcon[BACKGROUND_ICON_FIRMWARE_ERROR],
- "icon_firmware_error" },
{ &gProgressBarIndeterminate[0], "indeterminate1" },
{ &gProgressBarIndeterminate[1], "indeterminate2" },
{ &gProgressBarIndeterminate[2], "indeterminate3" },
@@ -341,23 +337,6 @@ void ui_init(void)
pthread_create(&t, NULL, input_thread, NULL);
}
-char *ui_copy_image(int icon, int *width, int *height, int *bpp) {
- pthread_mutex_lock(&gUpdateMutex);
- draw_background_locked(gBackgroundIcon[icon]);
- *width = gr_fb_width();
- *height = gr_fb_height();
- *bpp = sizeof(gr_pixel) * 8;
- int size = *width * *height * sizeof(gr_pixel);
- char *ret = malloc(size);
- if (ret == NULL) {
- LOGE("Can't allocate %d bytes for image\n", size);
- } else {
- memcpy(ret, gr_fb_data(), size);
- }
- pthread_mutex_unlock(&gUpdateMutex);
- return ret;
-}
-
void ui_set_background(int icon)
{
pthread_mutex_lock(&gUpdateMutex);
diff --git a/updater/install.c b/updater/install.c
index 934acaae4..852b393ea 100644
--- a/updater/install.c
+++ b/updater/install.c
@@ -703,44 +703,6 @@ done:
return result;
}
-// write_firmware_image(file, partition)
-//
-// partition is "radio" or "hboot"
-// file is not used until after updater exits
-//
-// TODO: this should live in some HTC-specific library
-char* WriteFirmwareImageFn(const char* name, State* state,
- int argc, Expr* argv[]) {
- char* result = NULL;
-
- char* partition;
- char* filename;
- if (ReadArgs(state, argv, 2, &filename, &partition) < 0) {
- return NULL;
- }
-
- if (strlen(partition) == 0) {
- ErrorAbort(state, "partition argument to %s can't be empty", name);
- goto done;
- }
- if (strlen(filename) == 0) {
- ErrorAbort(state, "file argument to %s can't be empty", name);
- goto done;
- }
-
- FILE* cmd = ((UpdaterInfo*)(state->cookie))->cmd_pipe;
- fprintf(cmd, "firmware %s %s\n", partition, filename);
-
- printf("will write %s firmware from %s\n", partition, filename);
- result = partition;
-
-done:
- if (result != partition) free(partition);
- free(filename);
- return result;
-}
-
-
extern int applypatch(int argc, char** argv);
// apply_patch(srcfile, tgtfile, tgtsha1, tgtsize, sha1:patch, ...)
@@ -888,7 +850,6 @@ void RegisterInstallFunctions() {
RegisterFunction("getprop", GetPropFn);
RegisterFunction("file_getprop", FileGetPropFn);
RegisterFunction("write_raw_image", WriteRawImageFn);
- RegisterFunction("write_firmware_image", WriteFirmwareImageFn);
RegisterFunction("apply_patch", ApplyPatchFn);
RegisterFunction("apply_patch_check", ApplyPatchFn);
diff --git a/updater/updater.c b/updater/updater.c
index 1aa277c7f..2d16deeba 100644
--- a/updater/updater.c
+++ b/updater/updater.c
@@ -39,9 +39,11 @@ int main(int argc, char** argv) {
}
char* version = argv[1];
- if ((version[0] != '1' && version[0] != '2') || version[1] != '\0') {
- // We support version "1" or "2".
- fprintf(stderr, "wrong updater binary API; expected 1 or 2, got %s\n",
+ if ((version[0] != '1' && version[0] != '2' && version[0] != '3') ||
+ version[1] != '\0') {
+ // We support version 1, 2, or 3.
+ fprintf(stderr, "wrong updater binary API; expected 1, 2, or 3; "
+ "got %s\n",
argv[1]);
return 2;
}
@@ -100,6 +102,7 @@ int main(int argc, char** argv) {
UpdaterInfo updater_info;
updater_info.cmd_pipe = cmd_pipe;
updater_info.package_zip = &za;
+ updater_info.version = atoi(version);
State state;
state.cookie = &updater_info;
diff --git a/updater/updater.h b/updater/updater.h
index 22fbfd285..bd60dc1fd 100644
--- a/updater/updater.h
+++ b/updater/updater.h
@@ -23,6 +23,7 @@
typedef struct {
FILE* cmd_pipe;
ZipArchive* package_zip;
+ int version;
} UpdaterInfo;
#endif