1 files changed, 0 insertions, 531 deletions

diff --git a/zlib-1.2.5/gzwrite.c b/zlib-1.2.5/gzwrite.c
deleted file mode 100644
index e8defc688..000000000
--- a/zlib-1.2.5/gzwrite.c
+++ /dev/null
@@ -1,531 +0,0 @@
-/* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "gzguts.h"
-
-/* Local functions */
-local int gz_init OF((gz_statep));
-local int gz_comp OF((gz_statep, int));
-local int gz_zero OF((gz_statep, z_off64_t));
-
-/* Initialize state for writing a gzip file.  Mark initialization by setting
-   state->size to non-zero.  Return -1 on failure or 0 on success. */
-local int gz_init(state)
-    gz_statep state;
-{
-    int ret;
-    z_streamp strm = &(state->strm);
-
-    /* allocate input and output buffers */
-    state->in = malloc(state->want);
-    state->out = malloc(state->want);
-    if (state->in == NULL || state->out == NULL) {
-        if (state->out != NULL)
-            free(state->out);
-        if (state->in != NULL)
-            free(state->in);
-        gz_error(state, Z_MEM_ERROR, "out of memory");
-        return -1;
-    }
-
-    /* allocate deflate memory, set up for gzip compression */
-    strm->zalloc = Z_NULL;
-    strm->zfree = Z_NULL;
-    strm->opaque = Z_NULL;
-    ret = deflateInit2(strm, state->level, Z_DEFLATED,
-                       15 + 16, 8, state->strategy);
-    if (ret != Z_OK) {
-        free(state->in);
-        gz_error(state, Z_MEM_ERROR, "out of memory");
-        return -1;
-    }
-
-    /* mark state as initialized */
-    state->size = state->want;
-
-    /* initialize write buffer */
-    strm->avail_out = state->size;
-    strm->next_out = state->out;
-    state->next = strm->next_out;
-    return 0;
-}
-
-/* Compress whatever is at avail_in and next_in and write to the output file.
-   Return -1 if there is an error writing to the output file, otherwise 0.
-   flush is assumed to be a valid deflate() flush value.  If flush is Z_FINISH,
-   then the deflate() state is reset to start a new gzip stream. */
-local int gz_comp(state, flush)
-    gz_statep state;
-    int flush;
-{
-    int ret, got;
-    unsigned have;
-    z_streamp strm = &(state->strm);
-
-    /* allocate memory if this is the first time through */
-    if (state->size == 0 && gz_init(state) == -1)
-        return -1;
-
-    /* run deflate() on provided input until it produces no more output */
-    ret = Z_OK;
-    do {
-        /* write out current buffer contents if full, or if flushing, but if
-           doing Z_FINISH then don't write until we get to Z_STREAM_END */
-        if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
-            (flush != Z_FINISH || ret == Z_STREAM_END))) {
-            have = (unsigned)(strm->next_out - state->next);
-            if (have && ((got = write(state->fd, state->next, have)) < 0 ||
-                         (unsigned)got != have)) {
-                gz_error(state, Z_ERRNO, zstrerror());
-                return -1;
-            }
-            if (strm->avail_out == 0) {
-                strm->avail_out = state->size;
-                strm->next_out = state->out;
-            }
-            state->next = strm->next_out;
-        }
-
-        /* compress */
-        have = strm->avail_out;
-        ret = deflate(strm, flush);
-        if (ret == Z_STREAM_ERROR) {
-            gz_error(state, Z_STREAM_ERROR,
-                      "internal error: deflate stream corrupt");
-            return -1;
-        }
-        have -= strm->avail_out;
-    } while (have);
-
-    /* if that completed a deflate stream, allow another to start */
-    if (flush == Z_FINISH)
-        deflateReset(strm);
-
-    /* all done, no errors */
-    return 0;
-}
-
-/* Compress len zeros to output.  Return -1 on error, 0 on success. */
-local int gz_zero(state, len)
-    gz_statep state;
-    z_off64_t len;
-{
-    int first;
-    unsigned n;
-    z_streamp strm = &(state->strm);
-
-    /* consume whatever's left in the input buffer */
-    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
-        return -1;
-
-    /* compress len zeros (len guaranteed > 0) */
-    first = 1;
-    while (len) {
-        n = GT_OFF(state->size) || (z_off64_t)state->size > len ?
-            (unsigned)len : state->size;
-        if (first) {
-            memset(state->in, 0, n);
-            first = 0;
-        }
-        strm->avail_in = n;
-        strm->next_in = state->in;
-        state->pos += n;
-        if (gz_comp(state, Z_NO_FLUSH) == -1)
-            return -1;
-        len -= n;
-    }
-    return 0;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzwrite(file, buf, len)
-    gzFile file;
-    voidpc buf;
-    unsigned len;
-{
-    unsigned put = len;
-    unsigned n;
-    gz_statep state;
-    z_streamp strm;
-
-    /* get internal structure */
-    if (file == NULL)
-        return 0;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return 0;
-
-    /* since an int is returned, make sure len fits in one, otherwise return
-       with an error (this avoids the flaw in the interface) */
-    if ((int)len < 0) {
-        gz_error(state, Z_BUF_ERROR, "requested length does not fit in int");
-        return 0;
-    }
-
-    /* if len is zero, avoid unnecessary operations */
-    if (len == 0)
-        return 0;
-
-    /* allocate memory if this is the first time through */
-    if (state->size == 0 && gz_init(state) == -1)
-        return 0;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return 0;
-    }
-
-    /* for small len, copy to input buffer, otherwise compress directly */
-    if (len < state->size) {
-        /* copy to input buffer, compress when full */
-        do {
-            if (strm->avail_in == 0)
-                strm->next_in = state->in;
-            n = state->size - strm->avail_in;
-            if (n > len)
-                n = len;
-            memcpy(strm->next_in + strm->avail_in, buf, n);
-            strm->avail_in += n;
-            state->pos += n;
-            buf = (char *)buf + n;
-            len -= n;
-            if (len && gz_comp(state, Z_NO_FLUSH) == -1)
-                return 0;
-        } while (len);
-    }
-    else {
-        /* consume whatever's left in the input buffer */
-        if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
-            return 0;
-
-        /* directly compress user buffer to file */
-        strm->avail_in = len;
-        strm->next_in = (voidp)buf;
-        state->pos += len;
-        if (gz_comp(state, Z_NO_FLUSH) == -1)
-            return 0;
-    }
-
-    /* input was all buffered or compressed (put will fit in int) */
-    return (int)put;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzputc(file, c)
-    gzFile file;
-    int c;
-{
-    unsigned char buf[1];
-    gz_statep state;
-    z_streamp strm;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return -1;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return -1;
-    }
-
-    /* try writing to input buffer for speed (state->size == 0 if buffer not
-       initialized) */
-    if (strm->avail_in < state->size) {
-        if (strm->avail_in == 0)
-            strm->next_in = state->in;
-        strm->next_in[strm->avail_in++] = c;
-        state->pos++;
-        return c;
-    }
-
-    /* no room in buffer or not initialized, use gz_write() */
-    buf[0] = c;
-    if (gzwrite(file, buf, 1) != 1)
-        return -1;
-    return c;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzputs(file, str)
-    gzFile file;
-    const char *str;
-{
-    int ret;
-    unsigned len;
-
-    /* write string */
-    len = (unsigned)strlen(str);
-    ret = gzwrite(file, str, len);
-    return ret == 0 && len != 0 ? -1 : ret;
-}
-
-#ifdef STDC
-#include <stdarg.h>
-
-/* -- see zlib.h -- */
-int ZEXPORTVA gzprintf (gzFile file, const char *format, ...)
-{
-    int size, len;
-    gz_statep state;
-    z_streamp strm;
-    va_list va;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return 0;
-
-    /* make sure we have some buffer space */
-    if (state->size == 0 && gz_init(state) == -1)
-        return 0;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return 0;
-    }
-
-    /* consume whatever's left in the input buffer */
-    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
-        return 0;
-
-    /* do the printf() into the input buffer, put length in len */
-    size = (int)(state->size);
-    state->in[size - 1] = 0;
-    va_start(va, format);
-#ifdef NO_vsnprintf
-#  ifdef HAS_vsprintf_void
-    (void)vsprintf(state->in, format, va);
-    va_end(va);
-    for (len = 0; len < size; len++)
-        if (state->in[len] == 0) break;
-#  else
-    len = vsprintf(state->in, format, va);
-    va_end(va);
-#  endif
-#else
-#  ifdef HAS_vsnprintf_void
-    (void)vsnprintf(state->in, size, format, va);
-    va_end(va);
-    len = strlen(state->in);
-#  else
-    len = vsnprintf((char *)(state->in), size, format, va);
-    va_end(va);
-#  endif
-#endif
-
-    /* check that printf() results fit in buffer */
-    if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
-        return 0;
-
-    /* update buffer and position, defer compression until needed */
-    strm->avail_in = (unsigned)len;
-    strm->next_in = state->in;
-    state->pos += len;
-    return len;
-}
-
-#else /* !STDC */
-
-/* -- see zlib.h -- */
-int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-                       a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
-    gzFile file;
-    const char *format;
-    int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-        a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
-{
-    int size, len;
-    gz_statep state;
-    z_streamp strm;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return 0;
-
-    /* make sure we have some buffer space */
-    if (state->size == 0 && gz_init(state) == -1)
-        return 0;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return 0;
-    }
-
-    /* consume whatever's left in the input buffer */
-    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
-        return 0;
-
-    /* do the printf() into the input buffer, put length in len */
-    size = (int)(state->size);
-    state->in[size - 1] = 0;
-#ifdef NO_snprintf
-#  ifdef HAS_sprintf_void
-    sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
-            a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-    for (len = 0; len < size; len++)
-        if (state->in[len] == 0) break;
-#  else
-    len = sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
-                a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-#  endif
-#else
-#  ifdef HAS_snprintf_void
-    snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
-             a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-    len = strlen(state->in);
-#  else
-    len = snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
-                 a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-#  endif
-#endif
-
-    /* check that printf() results fit in buffer */
-    if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
-        return 0;
-
-    /* update buffer and position, defer compression until needed */
-    strm->avail_in = (unsigned)len;
-    strm->next_in = state->in;
-    state->pos += len;
-    return len;
-}
-
-#endif
-
-/* -- see zlib.h -- */
-int ZEXPORT gzflush(file, flush)
-    gzFile file;
-    int flush;
-{
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return -1;
-    state = (gz_statep)file;
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return Z_STREAM_ERROR;
-
-    /* check flush parameter */
-    if (flush < 0 || flush > Z_FINISH)
-        return Z_STREAM_ERROR;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return -1;
-    }
-
-    /* compress remaining data with requested flush */
-    gz_comp(state, flush);
-    return state->err;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzsetparams(file, level, strategy)
-    gzFile file;
-    int level;
-    int strategy;
-{
-    gz_statep state;
-    z_streamp strm;
-
-    /* get internal structure */
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-    strm = &(state->strm);
-
-    /* check that we're writing and that there's no error */
-    if (state->mode != GZ_WRITE || state->err != Z_OK)
-        return Z_STREAM_ERROR;
-
-    /* if no change is requested, then do nothing */
-    if (level == state->level && strategy == state->strategy)
-        return Z_OK;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        if (gz_zero(state, state->skip) == -1)
-            return -1;
-    }
-
-    /* change compression parameters for subsequent input */
-    if (state->size) {
-        /* flush previous input with previous parameters before changing */
-        if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1)
-            return state->err;
-        deflateParams(strm, level, strategy);
-    }
-    state->level = level;
-    state->strategy = strategy;
-    return Z_OK;
-}
-
-/* -- see zlib.h -- */
-int ZEXPORT gzclose_w(file)
-    gzFile file;
-{
-    int ret = 0;
-    gz_statep state;
-
-    /* get internal structure */
-    if (file == NULL)
-        return Z_STREAM_ERROR;
-    state = (gz_statep)file;
-
-    /* check that we're writing */
-    if (state->mode != GZ_WRITE)
-        return Z_STREAM_ERROR;
-
-    /* check for seek request */
-    if (state->seek) {
-        state->seek = 0;
-        ret += gz_zero(state, state->skip);
-    }
-
-    /* flush, free memory, and close file */
-    ret += gz_comp(state, Z_FINISH);
-    (void)deflateEnd(&(state->strm));
-    free(state->out);
-    free(state->in);
-    gz_error(state, Z_OK, NULL);
-    free(state->path);
-    ret += close(state->fd);
-    free(state);
-    return ret ? Z_ERRNO : Z_OK;
-}