diff options
Diffstat (limited to 'MCServer/Plugins/APIDump/APIDesc.lua')
| -rw-r--r-- | MCServer/Plugins/APIDump/APIDesc.lua | 37 |
1 files changed, 31 insertions, 6 deletions
diff --git a/MCServer/Plugins/APIDump/APIDesc.lua b/MCServer/Plugins/APIDump/APIDesc.lua index 1fffbfcd0..47686e1e8 100644 --- a/MCServer/Plugins/APIDump/APIDesc.lua +++ b/MCServer/Plugins/APIDump/APIDesc.lua @@ -104,7 +104,11 @@ g_APIDesc = DumpToRawFile = { Params = "FileName", Return = "", Notes = "Dumps the raw data into a file. For debugging purposes only." }, Expand = { Params = "SubMinX, AddMaxX, SubMinY, AddMaxY, SubMinZ, AddMaxZ", Return = "", Notes = "Expands the specified number of blocks from each border. Modifies the size of this blockarea object. New blocks created with this operation are filled with zeroes." }, Fill = { Params = "DataTypes, BlockType, [BlockMeta], [BlockLight], [BlockSkyLight]", Return = "", Notes = "Fills the entire block area with the same values, specified. Uses the DataTypes param to determine which content types are modified." }, - FillRelCuboid = { Params = "MinRelX, MaxRelX, MinRelY, MaxRelY, MinRelZ, MaxRelZ, DataTypes, BlockType, [BlockMeta], [BlockLight], [BlockSkyLight]", Return = "", Notes = "Fills the specified cuboid with the same values (like Fill() )." }, + FillRelCuboid = + { + { Params = "{{cCuboid|RelCuboid}}, DataTypes, BlockType, [BlockMeta], [BlockLight], [BlockSkyLight]", Return = "", Notes = "Fills the specified cuboid (in relative coords) with the same values (like Fill() )." }, + { Params = "MinRelX, MaxRelX, MinRelY, MaxRelY, MinRelZ, MaxRelZ, DataTypes, BlockType, [BlockMeta], [BlockLight], [BlockSkyLight]", Return = "", Notes = "Fills the specified cuboid with the same values (like Fill() )." }, + }, GetBlockLight = { Params = "BlockX, BlockY, BlockZ", Return = "NIBBLETYPE", Notes = "Returns the blocklight at the specified absolute coords" }, GetBlockMeta = { Params = "BlockX, BlockY, BlockZ", Return = "NIBBLETYPE", Notes = "Returns the block meta at the specified absolute coords" }, GetBlockSkyLight = { Params = "BlockX, BlockY, BlockZ", Return = "NIBBLETYPE", Notes = "Returns the skylight at the specified absolute coords" }, @@ -130,15 +134,28 @@ g_APIDesc = HasBlockSkyLights = { Params = "", Return = "bool", Notes = "Returns true if current datatypes include skylight" }, HasBlockTypes = { Params = "", Return = "bool", Notes = "Returns true if current datatypes include block types" }, LoadFromSchematicFile = { Params = "FileName", Return = "", Notes = "Clears current content and loads new content from the specified schematic file. Returns true if successful. Returns false and logs error if unsuccessful, old content is preserved in such a case." }, - Merge = { Params = "BlockAreaSrc, RelX, RelY, RelZ, Strategy", Return = "", Notes = "Merges BlockAreaSrc into this object at the specified relative coords, using the specified strategy" }, + Merge = + { + { Params = "BlockAreaSrc, {{Vector3i|RelMinCoords}}, Strategy", Return = "", Notes = "Merges BlockAreaSrc into this object at the specified relative coords, using the specified strategy" }, + { Params = "BlockAreaSrc, RelX, RelY, RelZ, Strategy", Return = "", Notes = "Merges BlockAreaSrc into this object at the specified relative coords, using the specified strategy" }, + }, MirrorXY = { Params = "", Return = "", Notes = "Mirrors this block area around the XY plane. Modifies blocks' metas (if present) to match (i. e. furnaces facing the opposite direction)." }, MirrorXYNoMeta = { Params = "", Return = "", Notes = "Mirrors this block area around the XY plane. Doesn't modify blocks' metas." }, MirrorXZ = { Params = "", Return = "", Notes = "Mirrors this block area around the XZ plane. Modifies blocks' metas (if present)" }, MirrorXZNoMeta = { Params = "", Return = "", Notes = "Mirrors this block area around the XZ plane. Doesn't modify blocks' metas." }, MirrorYZ = { Params = "", Return = "", Notes = "Mirrors this block area around the YZ plane. Modifies blocks' metas (if present)" }, MirrorYZNoMeta = { Params = "", Return = "", Notes = "Mirrors this block area around the YZ plane. Doesn't modify blocks' metas." }, - Read = { Params = "World, MinX, MaxX, MinY, MaxY, MinZ, MaxZ, DataTypes", Return = "bool", Notes = "Reads the area from World, returns true if successful" }, - RelLine = { Params = "RelX1, RelY1, RelZ1, RelX2, RelY2, RelZ2, DataTypes, BlockType, [BlockMeta], [BlockLight], [BlockSkyLight]", Return = "", Notes = "Draws a line between the two specified points. Sets only datatypes specified by DataTypes." }, + Read = + { + { Params = "World, {{cCuboid|Cuboid}}, DataTypes", Return = "bool", Notes = "Reads the area from World, returns true if successful" }, + { Params = "World, {{Vector3i|Point1}}, {{Vector3i|Point2}}, DataTypes", Return = "bool", Notes = "Reads the area from World, returns true if successful" }, + { Params = "World, X1, X2, Y1, Y2, Z1, Z2, DataTypes", Return = "bool", Notes = "Reads the area from World, returns true if successful" }, + }, + RelLine = + { + { Params = "{{Vector3i|RelPoint1}}, {{Vector3i|RelPoint2}}, DataTypes, BlockType, [BlockMeta], [BlockLight], [BlockSkyLight]", Return = "", Notes = "Draws a line between the two specified points. Sets only datatypes specified by DataTypes (baXXX constants)." }, + { Params = "RelX1, RelY1, RelZ1, RelX2, RelY2, RelZ2, DataTypes, BlockType, [BlockMeta], [BlockLight], [BlockSkyLight]", Return = "", Notes = "Draws a line between the two specified points. Sets only datatypes specified by DataTypes (baXXX constants)." }, + }, RotateCCW = { Params = "", Return = "", Notes = "Rotates the block area around the Y axis, counter-clockwise (east -> north). Modifies blocks' metas (if present) to match." }, RotateCCWNoMeta = { Params = "", Return = "", Notes = "Rotates the block area around the Y axis, counter-clockwise (east -> north). Doesn't modify blocks' metas." }, RotateCW = { Params = "", Return = "", Notes = "Rotates the block area around the Y axis, clockwise (north -> east). Modifies blocks' metas (if present) to match." }, @@ -149,13 +166,21 @@ g_APIDesc = SetBlockSkyLight = { Params = "BlockX, BlockY, BlockZ, SkyLight", Return = "", Notes = "Sets the skylight at the specified absolute coords" }, SetBlockType = { Params = "BlockX, BlockY, BlockZ, BlockType", Return = "", Notes = "Sets the block type at the specified absolute coords" }, SetBlockTypeMeta = { Params = "BlockX, BlockY, BlockZ, BlockType, BlockMeta", Return = "", Notes = "Sets the block type and meta at the specified absolute coords" }, - SetOrigin = { Params = "OriginX, OriginY, OriginZ", Return = "", Notes = "Resets the origin for the absolute coords. Only affects how absolute coords are translated into relative coords." }, + SetOrigin = + { + { Params = "{{Vector3i|Origin}}", Return = "", Notes = "Resets the origin for the absolute coords. Only affects how absolute coords are translated into relative coords." }, + { Params = "OriginX, OriginY, OriginZ", Return = "", Notes = "Resets the origin for the absolute coords. Only affects how absolute coords are translated into relative coords." }, + }, SetRelBlockLight = { Params = "RelBlockX, RelBlockY, RelBlockZ, BlockLight", Return = "", Notes = "Sets the blocklight at the specified relative coords" }, SetRelBlockMeta = { Params = "RelBlockX, RelBlockY, RelBlockZ, BlockMeta", Return = "", Notes = "Sets the block meta at the specified relative coords" }, SetRelBlockSkyLight = { Params = "RelBlockX, RelBlockY, RelBlockZ, SkyLight", Return = "", Notes = "Sets the skylight at the specified relative coords" }, SetRelBlockType = { Params = "RelBlockX, RelBlockY, RelBlockZ, BlockType", Return = "", Notes = "Sets the block type at the specified relative coords" }, SetRelBlockTypeMeta = { Params = "RelBlockX, RelBlockY, RelBlockZ, BlockType, BlockMeta", Return = "", Notes = "Sets the block type and meta at the specified relative coords" }, - Write = { Params = "World, MinX, MinY, MinZ, DataTypes", Return = "bool", Notes = "Writes the area into World at the specified coords, returns true if successful" }, + Write = + { + { Params = "World, {{Vector3i|MinPoint}}, DataTypes", Return = "bool", Notes = "Writes the area into World at the specified coords, returns true if successful" }, + { Params = "World, MinX, MinY, MinZ, DataTypes", Return = "bool", Notes = "Writes the area into World at the specified coords, returns true if successful" }, + }, }, Constants = { |