diff options
Diffstat (limited to 'zlib-1.2.7/gzwrite.c')
-rw-r--r-- | zlib-1.2.7/gzwrite.c | 565 |
1 files changed, 565 insertions, 0 deletions
diff --git a/zlib-1.2.7/gzwrite.c b/zlib-1.2.7/gzwrite.c new file mode 100644 index 000000000..27cb3428e --- /dev/null +++ b/zlib-1.2.7/gzwrite.c @@ -0,0 +1,565 @@ +/* gzwrite.c -- zlib functions for writing gzip files + * Copyright (C) 2004, 2005, 2010, 2011, 2012 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#include "gzguts.h" + +/* Local functions */ +local int gz_init OF((gz_statep)); +local int gz_comp OF((gz_statep, int)); +local int gz_zero OF((gz_statep, z_off64_t)); + +/* Initialize state for writing a gzip file. Mark initialization by setting + state->size to non-zero. Return -1 on failure or 0 on success. */ +local int gz_init(state) + gz_statep state; +{ + int ret; + z_streamp strm = &(state->strm); + + /* allocate input buffer */ + state->in = malloc(state->want); + if (state->in == NULL) { + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + + /* only need output buffer and deflate state if compressing */ + if (!state->direct) { + /* allocate output buffer */ + state->out = malloc(state->want); + if (state->out == NULL) { + free(state->in); + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + + /* allocate deflate memory, set up for gzip compression */ + strm->zalloc = Z_NULL; + strm->zfree = Z_NULL; + strm->opaque = Z_NULL; + ret = deflateInit2(strm, state->level, Z_DEFLATED, + MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy); + if (ret != Z_OK) { + free(state->out); + free(state->in); + gz_error(state, Z_MEM_ERROR, "out of memory"); + return -1; + } + } + + /* mark state as initialized */ + state->size = state->want; + + /* initialize write buffer if compressing */ + if (!state->direct) { + strm->avail_out = state->size; + strm->next_out = state->out; + state->x.next = strm->next_out; + } + return 0; +} + +/* Compress whatever is at avail_in and next_in and write to the output file. + Return -1 if there is an error writing to the output file, otherwise 0. + flush is assumed to be a valid deflate() flush value. If flush is Z_FINISH, + then the deflate() state is reset to start a new gzip stream. If gz->direct + is true, then simply write to the output file without compressing, and + ignore flush. */ +local int gz_comp(state, flush) + gz_statep state; + int flush; +{ + int ret, got; + unsigned have; + z_streamp strm = &(state->strm); + + /* allocate memory if this is the first time through */ + if (state->size == 0 && gz_init(state) == -1) + return -1; + + /* write directly if requested */ + if (state->direct) { + got = write(state->fd, strm->next_in, strm->avail_in); + if (got < 0 || (unsigned)got != strm->avail_in) { + gz_error(state, Z_ERRNO, zstrerror()); + return -1; + } + strm->avail_in = 0; + return 0; + } + + /* run deflate() on provided input until it produces no more output */ + ret = Z_OK; + do { + /* write out current buffer contents if full, or if flushing, but if + doing Z_FINISH then don't write until we get to Z_STREAM_END */ + if (strm->avail_out == 0 || (flush != Z_NO_FLUSH && + (flush != Z_FINISH || ret == Z_STREAM_END))) { + have = (unsigned)(strm->next_out - state->x.next); + if (have && ((got = write(state->fd, state->x.next, have)) < 0 || + (unsigned)got != have)) { + gz_error(state, Z_ERRNO, zstrerror()); + return -1; + } + if (strm->avail_out == 0) { + strm->avail_out = state->size; + strm->next_out = state->out; + } + state->x.next = strm->next_out; + } + + /* compress */ + have = strm->avail_out; + ret = deflate(strm, flush); + if (ret == Z_STREAM_ERROR) { + gz_error(state, Z_STREAM_ERROR, + "internal error: deflate stream corrupt"); + return -1; + } + have -= strm->avail_out; + } while (have); + + /* if that completed a deflate stream, allow another to start */ + if (flush == Z_FINISH) + deflateReset(strm); + + /* all done, no errors */ + return 0; +} + +/* Compress len zeros to output. Return -1 on error, 0 on success. */ +local int gz_zero(state, len) + gz_statep state; + z_off64_t len; +{ + int first; + unsigned n; + z_streamp strm = &(state->strm); + + /* consume whatever's left in the input buffer */ + if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) + return -1; + + /* compress len zeros (len guaranteed > 0) */ + first = 1; + while (len) { + n = GT_OFF(state->size) || (z_off64_t)state->size > len ? + (unsigned)len : state->size; + if (first) { + memset(state->in, 0, n); + first = 0; + } + strm->avail_in = n; + strm->next_in = state->in; + state->x.pos += n; + if (gz_comp(state, Z_NO_FLUSH) == -1) + return -1; + len -= n; + } + return 0; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzwrite(file, buf, len) + gzFile file; + voidpc buf; + unsigned len; +{ + unsigned put = len; + unsigned n; + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return 0; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return 0; + + /* since an int is returned, make sure len fits in one, otherwise return + with an error (this avoids the flaw in the interface) */ + if ((int)len < 0) { + gz_error(state, Z_DATA_ERROR, "requested length does not fit in int"); + return 0; + } + + /* if len is zero, avoid unnecessary operations */ + if (len == 0) + return 0; + + /* allocate memory if this is the first time through */ + if (state->size == 0 && gz_init(state) == -1) + return 0; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return 0; + } + + /* for small len, copy to input buffer, otherwise compress directly */ + if (len < state->size) { + /* copy to input buffer, compress when full */ + do { + if (strm->avail_in == 0) + strm->next_in = state->in; + n = state->size - strm->avail_in; + if (n > len) + n = len; + memcpy(strm->next_in + strm->avail_in, buf, n); + strm->avail_in += n; + state->x.pos += n; + buf = (char *)buf + n; + len -= n; + if (len && gz_comp(state, Z_NO_FLUSH) == -1) + return 0; + } while (len); + } + else { + /* consume whatever's left in the input buffer */ + if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) + return 0; + + /* directly compress user buffer to file */ + strm->avail_in = len; + strm->next_in = (voidp)buf; + state->x.pos += len; + if (gz_comp(state, Z_NO_FLUSH) == -1) + return 0; + } + + /* input was all buffered or compressed (put will fit in int) */ + return (int)put; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzputc(file, c) + gzFile file; + int c; +{ + unsigned char buf[1]; + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return -1; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return -1; + } + + /* try writing to input buffer for speed (state->size == 0 if buffer not + initialized) */ + if (strm->avail_in < state->size) { + if (strm->avail_in == 0) + strm->next_in = state->in; + strm->next_in[strm->avail_in++] = c; + state->x.pos++; + return c & 0xff; + } + + /* no room in buffer or not initialized, use gz_write() */ + buf[0] = c; + if (gzwrite(file, buf, 1) != 1) + return -1; + return c & 0xff; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzputs(file, str) + gzFile file; + const char *str; +{ + int ret; + unsigned len; + + /* write string */ + len = (unsigned)strlen(str); + ret = gzwrite(file, str, len); + return ret == 0 && len != 0 ? -1 : ret; +} + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +#include <stdarg.h> + +/* -- see zlib.h -- */ +int ZEXPORTVA gzprintf (gzFile file, const char *format, ...) +{ + int size, len; + gz_statep state; + z_streamp strm; + va_list va; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return 0; + + /* make sure we have some buffer space */ + if (state->size == 0 && gz_init(state) == -1) + return 0; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return 0; + } + + /* consume whatever's left in the input buffer */ + if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) + return 0; + + /* do the printf() into the input buffer, put length in len */ + size = (int)(state->size); + state->in[size - 1] = 0; + va_start(va, format); +#ifdef NO_vsnprintf +# ifdef HAS_vsprintf_void + (void)vsprintf((char *)(state->in), format, va); + va_end(va); + for (len = 0; len < size; len++) + if (state->in[len] == 0) break; +# else + len = vsprintf((char *)(state->in), format, va); + va_end(va); +# endif +#else +# ifdef HAS_vsnprintf_void + (void)vsnprintf((char *)(state->in), size, format, va); + va_end(va); + len = strlen((char *)(state->in)); +# else + len = vsnprintf((char *)(state->in), size, format, va); + va_end(va); +# endif +#endif + + /* check that printf() results fit in buffer */ + if (len <= 0 || len >= (int)size || state->in[size - 1] != 0) + return 0; + + /* update buffer and position, defer compression until needed */ + strm->avail_in = (unsigned)len; + strm->next_in = state->in; + state->x.pos += len; + return len; +} + +#else /* !STDC && !Z_HAVE_STDARG_H */ + +/* -- see zlib.h -- */ +int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, + a11, a12, a13, a14, a15, a16, a17, a18, a19, a20) + gzFile file; + const char *format; + int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, + a11, a12, a13, a14, a15, a16, a17, a18, a19, a20; +{ + int size, len; + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that can really pass pointer in ints */ + if (sizeof(int) != sizeof(void *)) + return 0; + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return 0; + + /* make sure we have some buffer space */ + if (state->size == 0 && gz_init(state) == -1) + return 0; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return 0; + } + + /* consume whatever's left in the input buffer */ + if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1) + return 0; + + /* do the printf() into the input buffer, put length in len */ + size = (int)(state->size); + state->in[size - 1] = 0; +#ifdef NO_snprintf +# ifdef HAS_sprintf_void + sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); + for (len = 0; len < size; len++) + if (state->in[len] == 0) break; +# else + len = sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); +# endif +#else +# ifdef HAS_snprintf_void + snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); + len = strlen((char *)(state->in)); +# else + len = snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, + a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, + a19, a20); +# endif +#endif + + /* check that printf() results fit in buffer */ + if (len <= 0 || len >= (int)size || state->in[size - 1] != 0) + return 0; + + /* update buffer and position, defer compression until needed */ + strm->avail_in = (unsigned)len; + strm->next_in = state->in; + state->x.pos += len; + return len; +} + +#endif + +/* -- see zlib.h -- */ +int ZEXPORT gzflush(file, flush) + gzFile file; + int flush; +{ + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return -1; + state = (gz_statep)file; + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return Z_STREAM_ERROR; + + /* check flush parameter */ + if (flush < 0 || flush > Z_FINISH) + return Z_STREAM_ERROR; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return -1; + } + + /* compress remaining data with requested flush */ + gz_comp(state, flush); + return state->err; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzsetparams(file, level, strategy) + gzFile file; + int level; + int strategy; +{ + gz_statep state; + z_streamp strm; + + /* get internal structure */ + if (file == NULL) + return Z_STREAM_ERROR; + state = (gz_statep)file; + strm = &(state->strm); + + /* check that we're writing and that there's no error */ + if (state->mode != GZ_WRITE || state->err != Z_OK) + return Z_STREAM_ERROR; + + /* if no change is requested, then do nothing */ + if (level == state->level && strategy == state->strategy) + return Z_OK; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + return -1; + } + + /* change compression parameters for subsequent input */ + if (state->size) { + /* flush previous input with previous parameters before changing */ + if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1) + return state->err; + deflateParams(strm, level, strategy); + } + state->level = level; + state->strategy = strategy; + return Z_OK; +} + +/* -- see zlib.h -- */ +int ZEXPORT gzclose_w(file) + gzFile file; +{ + int ret = Z_OK; + gz_statep state; + + /* get internal structure */ + if (file == NULL) + return Z_STREAM_ERROR; + state = (gz_statep)file; + + /* check that we're writing */ + if (state->mode != GZ_WRITE) + return Z_STREAM_ERROR; + + /* check for seek request */ + if (state->seek) { + state->seek = 0; + if (gz_zero(state, state->skip) == -1) + ret = state->err; + } + + /* flush, free memory, and close file */ + if (state->size) { + if (gz_comp(state, Z_FINISH) == -1) + ret = state->err; + if (!state->direct) { + (void)deflateEnd(&(state->strm)); + free(state->out); + } + free(state->in); + } + gz_error(state, Z_OK, NULL); + free(state->path); + if (close(state->fd) == -1) + ret = Z_ERRNO; + free(state); + return ret; +} |