blob: f58def113c0dc0a06d2701d57fcba4c6775e6366 (
plain) (
tree)
|
|
---
title: ODI Realtek DFP-34G-2C2
description: New model 2022 - v05
has_children: false
layout: default
parent: ODI
---
# Hardware Specifications
| | |
| ------------ | --------------------------------- |
| Vendor/Brand | ODI |
| Model | DFP-34G-2C2 |
| Chipset | Realtek RTL9601D |
| Flash | 8 MB |
| RAM | 64 MB |
| System | Linux (Luna SDK 1.9) |
| HSGMII | Yes |
| Optics | SC/UPC |
| IP address | 192.168.1.1 |
| Web Gui | ✅ user `admin`, password `admin` |
| SSH | ✅ user `admin`, password `admin` |
| Telnet | |
| Serial | |
| Form Factor | miniONT SFP |
{% include alert.html content="SSH uses an outdated set of algorithms/ciphers, you can connect using the following command:" alert="Note" icon="svg-info" color="blue" %}
```shell
ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oCiphers=+3des-cbc admin@192.168.1.1
```
{% include image.html file="realtek-dfp-34g-2c2.jpg" alt="ODI Realtek DFP-34X-C2C" caption="ODI Realtek DFP-34X-C2C" %}
## List of software versions
- V1.0-220530
- V1.0-220414
- V1.0-220304
## List of firmwares and files
- [Firmware repository by Anime4000](https://github.com/Anime4000/RTL960x/tree/main/Firmware/V2801F)
The reccomended version are `M114_sfp_ODI_hybrid_220527.tar` or `M114_sfp_ODI_hybrid_220916.tar` because it has working VLAN translation.
## List of partitions
| dev | size | erasesize | name |
| ----- | -------- | --------- | --------------- |
| mtd0 | 00040000 | 00001000 | "boot" |
| mtd1 | 00002000 | 00001000 | "env" |
| mtd2 | 00002000 | 00001000 | "env2" |
| mtd3 | 0003c000 | 00001000 | "config" |
| mtd4 | 0014c000 | 00001000 | "k0" |
| mtd5 | 00274000 | 00001000 | "r0" |
| mtd6 | 0014c000 | 00001000 | "k1" |
| mtd7 | 00274000 | 00001000 | "r1" |
| mtd8 | 00001000 | 00001000 | "Partition_008" |
| mtd9 | 00001000 | 00001000 | "Partition_009" |
| mtd10 | 00001000 | 00001000 | "Partition_010" |
| mtd11 | 00001000 | 00001000 | "Partition_011" |
| mtd12 | 0014c000 | 00001000 | "linux" |
| mtd13 | 00274000 | 00001000 | "rootfs" |
This stick supports dual boot.
`k0` and `r0` respectively contain the kernel and firmware of the first image, while `k1` and `r1` respectively contain the kernel and the firmware of the second one
## Serial
The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface. It's near the SFP header. TX, RX and ground pads need to be connected to a USB2TTL adapter supporting a logic level of 3.3V.
{% include image.html file="ont-odi-realtek-dfp-34x-2c2/ttl.jpg" alt="DFP-34X-2C2 TTL Connection" caption="DFP-34X-2C2 TTL Connection" %}
{% include image.html file="ont-odi-realtek-dfp-34x-2c2/ttl-2.jpg" alt="DFP-34X-2C2 TTL Pin" caption="DFP-34X-2C2 TTL Pin" %}
{% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %}
{% include_relative luna-sdk-userful-commands.md flash='flash' flash='flash' ploam='hex' %}
## Getting/Setting the ONT Vendor ID
{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %}
```sh
# flash get PON_VENDOR_ID
PON_VENDOR_ID=ZTEG
# flash set PON_VENDOR_ID HWTC
```
## Getting/Settng the ONT Custom software version
{% include alert.html content="This needs the OMCI_OLT_MODE value to be set to 3 and firmware 220530 as modded by stich86" alert="Note" icon="svg-info" color="blue" %}
```sh
# nv setenv sw_custom_version0 YOURFIRSTSWVER
# nv setenv sw_custom_version1 YOURSECONDSWVER
```
## Getting/Setting a custom HW Version
{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %}
```sh
# flash get HW_HWVER
HW_HWVER=V2.0
# flash set HW_HWVER MYHWVERSION
```
## Getting/Setting a custom ONT Equipment ID
{% include alert.html content="This may need the OMCI_OLT_MODE value to be set to 3 to work" alert="Note" icon="svg-info" color="blue" %}
```sh
# flash get GPON_ONU_MODEL
GPON_ONU_MODEL=DFP-34X-2C2
# flash set GPON_ONU_MODEL DFP-34X-XXX
```
# Known Bugs
- Auto-sensing mode to switch between SGMII/HiSGMII
# Miscellaneous Links
- [Hacking RTL960x](https://github.com/Anime4000/RTL960x)
- [Ditch ONU, use GPON SFP on Business Grade Router, Mikrotik/Ubiquiti/pfSense (Home Networking)](https://forum.lowyat.net/topic/4925452)
- [For the new model ODI ZTE DFP-34X-C2C](/ont-odi-zte-dfp-34x-2c2)
|
