summaryrefslogtreecommitdiffstats
path: root/_ont/ont-fs-com-gpon-onu-stick-with-mac.md
diff options
context:
space:
mode:
authorErnesto Castellotti <mail@ernestocastellotti.it>2022-12-27 21:33:07 +0100
committerGitHub <noreply@github.com>2022-12-27 21:33:07 +0100
commite240ff2d50d0b33bdfe3651f0ac0588cd21d2c75 (patch)
tree239c3d946fcd8ece35c73845a1e53dd72d80f1f2 /_ont/ont-fs-com-gpon-onu-stick-with-mac.md
parentHot fix: eeprom dbm value (#70) (diff)
downloadhack-gpon.github.io-e240ff2d50d0b33bdfe3651f0ac0588cd21d2c75.tar
hack-gpon.github.io-e240ff2d50d0b33bdfe3651f0ac0588cd21d2c75.tar.gz
hack-gpon.github.io-e240ff2d50d0b33bdfe3651f0ac0588cd21d2c75.tar.bz2
hack-gpon.github.io-e240ff2d50d0b33bdfe3651f0ac0588cd21d2c75.tar.lz
hack-gpon.github.io-e240ff2d50d0b33bdfe3651f0ac0588cd21d2c75.tar.xz
hack-gpon.github.io-e240ff2d50d0b33bdfe3651f0ac0588cd21d2c75.tar.zst
hack-gpon.github.io-e240ff2d50d0b33bdfe3651f0ac0588cd21d2c75.zip
Diffstat (limited to '')
-rw-r--r--_ont/ont-fs-com-gpon-onu-stick-with-mac.md134
1 files changed, 133 insertions, 1 deletions
diff --git a/_ont/ont-fs-com-gpon-onu-stick-with-mac.md b/_ont/ont-fs-com-gpon-onu-stick-with-mac.md
index b5e0527..669ba96 100644
--- a/_ont/ont-fs-com-gpon-onu-stick-with-mac.md
+++ b/_ont/ont-fs-com-gpon-onu-stick-with-mac.md
@@ -262,6 +262,138 @@ When image1 is committed:
| mtd4 | 006d8077 | 00010000 | "rootfs" |
| mtd5 | 00410000 | 00010000 | "rootfs_data" |
+## EEPROM (I2C slave simulated EEPROM)
+The FS GPON-ONU-34-20BI does not have a physical EEPROM, the Falcon SOC emulates an EEPROM by exposing it on the I2C interface as required by the SFF-8472 specification.
+
+On the I2C interface there will be two memories of 256 bytes each at the addresses `1010000X (A0h)` and `1010001X (A2h)`, however in reality the memory available from the emulated EEPROM will be 640 bytes each but only the first 256 bytes will be exposed in the I2C interface.
+
+The FS GPON-ONU-34-20BI stores the content of the emulated EEPROM in U-Boot env variables to restore it after a reboot:
+
+- `EEPROM0 (A0h)` stored in U-Boot env variable `sfp_a0_low_128`
+- `EEPROM1 (A2h)` stored in U-Boot env variable `sfp_a2_info`
+
+### EEPROM0 layout
+
+| address | size | name | default value | description |
+| --------- | -------- | --------------------------------- | ------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------- |
+| | | **BASE ID FIELDS (SFF-8472)** | | |
+| 0 | 1 | Identifier | `0x03` (SFP) | Type of transceiver |
+| 1 | 1 | Ext identifier | `0x04` (MOD_DEF 4) | Additional information about the transceiver |
+| 2 | 1 | Connector | `0x01` (SC) | Type of media connector |
+| 3-10 | 8 | Transceiver | `0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00` | Code for optical compatibility |
+| 11 | 1 | Encoding | `0x03` (NRZ) | High speed serial encoding algorithm |
+| 12 | 1 | Signaling Rate, Nominal | `0x0C` (1.244Gbps) | Nominal signaling rate |
+| 13 | 1 | Rate Identifier | `0x00` (Not used) | Type of rate select functionality |
+| 14 | 1 | Length (SMF,km) | `0x14` (20 km) | Link length supported for single-mode fiber, units of km |
+| 15 | 1 | Length (SMF) | `0xC8` (200 x 100m) | Link length supported for single-mode fiber, units of 100 m |
+| 16 | 1 | Length (50 um, OM2) | `0x00` (No support) | Link length supported for 50 um OM2 fiber, units of 10 m |
+| 17 | 1 | Length (62.5 um, OM1) | `0x00` (No support) | Link length supported for 62.5 um OM1 fiber, units of 10 m |
+| 18 | 1 | Length copper cable | `0x00` (No support) | Link length supported for copper or direct attach cable, units of m |
+| 19 | 1 | Length (50 um, OM3) | `0x00` (No support) | Link length supported for 50 um OM3 fiber, units of 10 m |
+| 20-35 | 16 | Vendor name | `0x46 0x53 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20` (FS) | SFP vendor name (ASCII) |
+| 36 | 1 | Transceiver | `0x00` (No support) | Code for optical compatibility |
+| 37-39 | 3 | Vendor OUI | `0x00 0x00 0x00` (No specified) | SFP vendor IEEE company ID |
+| 40-55 | 16 | Vendor PN | `0x47 0x50 0x4F 0x4E 0x2D 0x4F 0x4E 0x55 0x2D 0x33 0x34 0x2D 0x32 0x30 0x42 0x49` (GPON-ONU-34-20BI) | Part number provided by SFP vendor (ASCII) |
+| 56-59 | 4 | Vendor rev | `0x30 0x31 0x20 0x20` (01) | Revision level for part number provided by vendor (ASCII) |
+| 60-61 | 2 | Wavelength | `0x05 0x1E` (1310nm TX) | Laser wavelength |
+| 62 | 1 | Fibre Channel Speed 2 | `0x00` (No support) | Transceiver's Fibre Channel speed capabilities |
+| 63 | 1 | CC_BASE | | Check code for Base ID Fields (addresses 0 to 62) |
+| | | **EXTENDED ID FIELDS (SFF-8472)** | | |
+| 64-65 | 2 | Options | `0x00 0x1A` (TX DISABLE, TX FAULT, RX LOS) | Indicates which optional transceiver signals are implemented |
+| 66 | 1 | Signaling Rate, max | `0x00` (No specified) | Upper signaling rate margin, units of % |
+| 67 | 1 | Signaling Rate, min | `0x00` (No specified) | Lower signaling rate margin, units of % |
+| 68-83 | 16 | Vendor SN | Unique in each SFP | Serial number provided by vendor (ASCII) |
+| 84-91 | 8 | Date code | Unique in each SFP | Vendor's manufacturing date code |
+| 92 | 1 | Diagnostic Monitoring Type | `0x68` (Digital diagnostic, Internally calibrated, Received average power type) | Indicates which type of diagnostic monitoring is implemented |
+| 93 | 1 | Enhanced Options | `0xF0` (Alarm/warning flags, soft TX_DISABLE control, soft TX_FAULT monitoring, soft RX_LOS monitoring) | Indicates which optional enhanced features are implemented |
+| 94 | 1 | SFF-8472 Compliance | `0x05` (Rev 11.0 of SFF-8472) | Indicates which revision of SFF-8472 the transceiver complies with |
+| 95 | 1 | CC_EXT | | Check code for the Extended ID Fields (addresses 64 to 94) |
+| | | **VENDOR SPECIFIC FIELDS** | | |
+| 96-127 | 32 | Vendor data | `0x20 0x20 0x20...` (Not used) | Vendor specifc data (ASCII) |
+| 128-255 | 128 | Reserved | `0x00 0x00 0x00...` | Reserved |
+| | | **EXTRA EEPROM FIELDS** | | **Not exposed to I2C interface** |
+| 256-639 | 384 | Reserved | `0x00 0x00 0x00...` | Reserved |
+
+
+### EEPROM1 layout
+
+| address | size | name | default value | description |
+| --------- | -------- | --------------------------------- | ------------------------------------------------------------------------------------------- | ------------------------------------------------------------------- |
+| | | **DIAGNOSTIC AND CONTROL FIELDS** | | |
+| 0-1 | 2 | Temp High Alarm | `0x5F 0x00` (95℃) | |
+| 2-3 | 2 | Temp Low Alarm | `0xCE 0x00` (-50℃) | |
+| 4-5 | 2 | Temp High Warning | `0x5A 0x00` (90℃) | |
+| 6-7 | 2 | Temp Low Warning | `0xD3 0x00` (-45℃) | |
+| 8-9 | 2 | Voltage High Alarm | `0x8C 0xA0` (3.6V) | |
+| 10-11 | 2 | Voltage Low Alarm | `0x75 0x30` (3.0V) | |
+| 12-13 | 2 | Voltage High Warning | `0x88 0xB8` (3.5V) | |
+| 14-15 | 2 | Voltage Low Warning | `0x79 0x18` (3.1V) | |
+| 16-17 | 2 | Bias High Alarm | `0xAF 0xC8` (90mA) | |
+| 18-19 | 2 | Bias Low Alarm | `0x00 0x00` (0mA) | |
+| 20-21 | 2 | Bias High Warning | `0x88 0xB8` (70mA) | |
+| 22-23 | 2 | Bias Low Warning | `0x00 0x00` (0mA) | |
+| 24-25 | 2 | TX Power High Alarm | `0xF6 0x77` (8dBm) | Value expressed in watts subunits |
+| 26-27 | 2 | TX Power Low Alarm | `0x15 0xF7` (-2.5dBm) | Value expressed in watts subunits |
+| 28-29 | 2 | TX Power High Warning | `0xC3 0xC6` (7dBm) | Value expressed in watts subunits |
+| 30-31 | 2 | TX Power Low Warning | `0x1B 0xA7` (-1.5dBm) | Value expressed in watts subunits |
+| 32-33 | 2 | RX Power High Alarm | `0x0C 0x5A` (-5dBm) | Value expressed in watts subunits |
+| 34-35 | 2 | RX Power Low Alarm | `0x00 0x08` (-31dBm) | Value expressed in watts subunits |
+| 36-37 | 2 | RX Power High Warning | `0x09 0xCF` (-6dBm) | Value expressed in watts subunits |
+| 38-39 | 2 | RX Power Low Warning | `0x00 0x0A` (-30dBm) | Value expressed in watts subunits |
+| 40-45 | 6 | MAC address | Unique in each SFP | Contains the mac address of the SFP, it could also be empty |
+| 46-55 | 10 | Reserved | `0x00 0x00 0x00...` | Reserved |
+| 56-59 | 4 | RX_PWR(4) Calibration | `0x00 0x00 0x00 0x00` | 4th order RSSI calibration coefficient |
+| 60-63 | 4 | RX_PWR(3) Calibration | `0x00 0x00 0x00 0x00` | 3rd order RSSI calibration coefficient |
+| 64-67 | 4 | RX_PWR(2) Calibration | `0x00 0x00 0x00 0x00` | 2nd order RSSI calibration coefficient |
+| 68-71 | 4 | RX_PWR(1) Calibration | `0x3F 0x80 0x00 0x00` | 1st order RSSI calibration coefficient |
+| 72-75 | 4 | RX_PWR(0) Calibration | `0x00 0x00 0x00 0x00` | 0th order RSSI calibration coefficient |
+| 76-77 | 2 | TX_I(Slope) Calibration | `0x01 0x00` | Slope for Bias calibration |
+| 78-79 | 2 | TX_I(Offset) Calibration | `0x00 0x00` | Offset for Bias calibration |
+| 80-81 | 2 | TX_PWR(Slope) Calibration | `0x01 0x00` | Slope for TX Power calibration |
+| 82-83 | 2 | TX_PWR(Offset) Calibration | `0x00 0x00` | Offset for TX Power calibration |
+| 84-85 | 2 | T(Slope) Calibration | `0x01 0x00` | Slope for Temperature calibration |
+| 86-87 | 2 | T(Offset) Calibration | `0x00 0x00` | Offset for Temperature calibration, in units of 256ths °C |
+| 88-89 | 2 | V(Slope) Calibration | `0x01 0x00` | Slope for VCC calibration |
+| 90-91 | 2 | V(Offset) Calibration | `0x00 0x00` | Offset for VCC calibration |
+| 92-94 | 3 | Reserved | `0x00 0x00 0x00` | Reserved |
+| 95 | 1 | CC_DMI | | Check code for Base Diagnostic Fields (addresses 0 to 94) |
+| 96 | 1 | Temperature MSB | | Internally measured module temperature |
+| 97 | 1 | Temperature LSB | | |
+| 98 | 1 | Vcc MSB | | Internally measured supply voltage in transceiver |
+| 99 | 1 | Vcc LSB | | |
+| 100 | 1 | TX Bias MSB | | Internally measured TX Bias Current |
+| 101 | 1 | TX Bias LSB | | |
+| 102 | 1 | TX Power MSB | | Measured TX output power |
+| 103 | 1 | TX Power LSB | | |
+| 104 | 1 | RX Power MSB | | Measured RX input power |
+| 105 | 1 | RX Power LSB | | |
+| 106-109 | 4 | Optional Diagnostics | `0xFF 0xFF 0xFF 0xFF` (No support) | Monitor Data for Optional Laser temperature and TEC current |
+| 110 | 1 | Status/Control | `0x82` (Soft TX disable, disable laser, digital TX fault, digital RX LOS, power&data ready) | Optional Status and Control Bits |
+| 111 | 1 | Reserved | `0x00` | Reserved |
+| 112-113 | 2 | Alarm Flags | `0x01 0x40` | Diagnostic Alarm Flag Status Bits |
+| 114 | 1 | Tx Input EQ control | `0xFF` (No support) | Tx Input equalization level control |
+| 115 | 1 | Rx Out Emphasis control | `0xFF` (No support) | Rx Output emphasis level control |
+| 116-117 | 2 | Warning Flags | `0x01 0x40` | Diagnostic Warning Flag Status Bits |
+| 118-119 | 2 | Ext Status/Control | `0x00 0x00` (No support) | Extended module control and status bytes |
+| | | **GENERAL USE FIELDS** | | |
+| 120-126 | 7 | Vendor Specific | `0x70 0x00 0x00 0x00 0x00 0x00 0x00` | Vendor specific memory addresses |
+| 127 | 1 | Table Select | `0x00` | Optional Page Select |
+| | | **USER WRITABLE EEPROM** | | |
+| 128-190 | 63 | Reserved | `0xFF 0xFF 0xFF...` | Reserved |
+| 191-214 | 24 | GPON LOID or PLOAM | Depends on the configuration of the SFP | GPON Logical ONU ID or PLOAM, depends on `GPON LOID/PLOAM switch` |
+| 215-231 | 17 | GPON LPWD | Depends on the configuration of the SFP | GPON Logical Password |
+| 232 | 1 | GPON LOID/PLOAM switch | Depends on the configuration of the SFP | `0x01` to enable LOID, `0x02` to enable PLOAM |
+| 233-240 | 8 | GPON SN | Unique in each SFP | GPON Serial Number (ME 256) |
+| 241-247 | 7 | Reserved | `0xFF 0xFF 0xFF...` | Reserved |
+| 248-255 | 8 | Vendor Control | `0xFF 0xFF 0xFF...` (Not used) | Vendor specific control functions |
+| | | **EXTRA EEPROM FIELDS** | | **Not exposed to I2C interface** |
+| 256-511 | 256 | Unknown vendor specific | | Probably not used in current SFPs |
+| 512-531 | 20 | GPON Equipment ID | | GPON Equipment ID (ME 257), may not work in some firmwares |
+| 532-535 | 4 | GPON Vendor ID | | GPON Vendor ID (ME 256 and more), may not work in some firmware |
+| 536-639 | 104 | Reserved | | Reserved |
+
+{% include alert.html content="For more information, see the SFF-8472 Rev 11.0 specification." alert="Info" icon="svg-info" color="blue" %}
+
## List of firmwares and files
- [6BA1896SPLQA13 MTD0/U-Boot](https://mega.nz/file/wptjyYiS#Xj3cijX2bN0FexsZr1Wn7iRG0Wy4Z8vX0NyNBd1kBWo){: .btn } md5hash: 992b31a67c644aa68cf7f9caf956b1f9
- [6BA1896SPLQA13 MTD2/Image0](https://mega.nz/file/1kUlUbgQ#ANS9qH6wCggYshsQ3STD6gxmR_3TL-5MXfdCl5s50Nk){: .btn } md5hash: 5d46a9acc3c5ba8710887aa32b82aeb4
@@ -274,4 +406,4 @@ When image1 is committed:
- [FS.com](https://www.fs.com/it/products/133619.html)
- [General setting of lantiq](https://forum.fibra.click/d/23881-ma5671a-e-vodafone-25-gbps/64)
- [Usage GPON module SFP in Spain](https://forum.mikrotik.com/viewtopic.php?t=116364&start=300)
-- [SourcePhotonics SPS-34-24T-HP-TDFO Datasheet](https://www.sourcephotonics.com/wp-content/uploads/2017/08/DS-8085-02_SPS-34-24T-HP-TDFO.pdf) \ No newline at end of file
+- [SourcePhotonics SPS-34-24T-HP-TDFO Datasheet](https://www.sourcephotonics.com/wp-content/uploads/2017/08/DS-8085-02_SPS-34-24T-HP-TDFO.pdf)