diff options
| author | Andrea Greco <11886092+Andreag00@users.noreply.github.com> | 2022-12-10 17:38:58 +0100 |
|---|---|---|
| committer | Simone Bortolin <simonebortolin@users.noreply.github.com> | 2022-12-19 23:09:26 +0100 |
| commit | 61ed75c34975f485d4edb7310515cc607dab2cf0 (patch) | |
| tree | 671a4a3448bbdcffd1deddea3011c8d8b2c192fe /_ont/ont-nokia-g-010g-q.md | |
| parent | Nokia G-010G-T General info (#49) (diff) | |
| download | hack-gpon.github.io-61ed75c34975f485d4edb7310515cc607dab2cf0.tar hack-gpon.github.io-61ed75c34975f485d4edb7310515cc607dab2cf0.tar.gz hack-gpon.github.io-61ed75c34975f485d4edb7310515cc607dab2cf0.tar.bz2 hack-gpon.github.io-61ed75c34975f485d4edb7310515cc607dab2cf0.tar.lz hack-gpon.github.io-61ed75c34975f485d4edb7310515cc607dab2cf0.tar.xz hack-gpon.github.io-61ed75c34975f485d4edb7310515cc607dab2cf0.tar.zst hack-gpon.github.io-61ed75c34975f485d4edb7310515cc607dab2cf0.zip | |
Diffstat (limited to '_ont/ont-nokia-g-010g-q.md')
| -rw-r--r-- | _ont/ont-nokia-g-010g-q.md | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/_ont/ont-nokia-g-010g-q.md b/_ont/ont-nokia-g-010g-q.md index 0c6e078..47e13c5 100644 --- a/_ont/ont-nokia-g-010g-q.md +++ b/_ont/ont-nokia-g-010g-q.md @@ -40,7 +40,7 @@ parent: Nokia | mtd2 | 00700000 | 00010000 | "ImageA" | | mtd3 | 00700000 | 00010000 | "ImageB" | -This ont seems to support dual boot (notice partitions "ImageA" and "ImageB"), however this has not been tested. +This ONT seems to support dual boot (notice partitions "ImageA" and "ImageB"), however this has not been tested. ## List of firmwares and files # Serial @@ -52,7 +52,7 @@ You can easily communicate with the ONT using a TTL converter (for example the C {% include alert.html content="The ONT's serial logic is 3V3." alert="Warning" icon="svg-warning" color="red" %} -Make sure the logic of your TTL converter is 3V3 too otherwise you might damage the ONT, in my case I wasn't sure the CH341A had a 3V3 logic for the TTL part so I set up a voltage divider made of 2 resistors between the TX pin and ground as shown in the image below. +Make sure the logic of your TTL converter is 3V3 too otherwise you might damage the ONT, in my case I wasn't sure whether the CH341A programmer used 3V3 logic for the TTL part so I set up a voltage divider made of 2 resistors between the TX pin and ground as shown in the image below. *Also make sure that your TTL converter RX pin voltage threshold is less than (or equal to) 3V3* |