1 files changed, 208 insertions, 0 deletions

diff --git a/_ont_xgs/serial_dump/fs-XGS-ONU-25-20NI_minishell.txt b/_ont_xgs/serial_dump/fs-XGS-ONU-25-20NI_minishell.txt
new file mode 100644
index 0000000..08d22d0
--- /dev/null
+++ b/_ont_xgs/serial_dump/fs-XGS-ONU-25-20NI_minishell.txt
@@ -0,0 +1,208 @@
++traffic             Service CLI menu
+	+ces                 CES CLI menu (empty)
+	+pon                 PON CLI menu
+		+debug               PON debug command
+			 rptwanstat          config report wan status to MEC
+			 tcont               add/delete/flush a Tcont
+			 flow                configure the parameters of a flow
+			 queue               configure the parameters of a Tcont Queue
+			 sendomci            Send a OMCI message
+			 prbs                Enable/disable transmitting PRBS continuously
+			 dyingGsend          Enable/disable transmitting PRBS continuously
+			 omcidbg             Enable/disable kernel OMCI log
+			 reportGemCnt        Enable/disable report gem counter to MEC
+			 throughput          Enable/disable throughput test
+			 ponmode             Enable/disable qos
+			 dump_classifier     Dump classifier rule
+			 gem_to_cpu          trap gem port all packets to cpu
+		+hw                  PON Hardware level command
+			 show                Show hardware status or configurations
+			 read_reg            Read register value
+			 write_reg           Write register value
+		+ca                  PON cortina command
+			 show                Show cortina status or configurations
+		+app                 PON APP command
+			 show                Show database in PMR app
+			 sendmsg             Send Msg to PMR app
+		 ber_interval        Configure the BER interval
+		 sf_threshold        The threshold of BIP to report signal failure
+		 sd_threshold        The threshold of BIP to report signal degrade
+		 sn                  Set the serial number of the ONT
+		 password            Set the password of ONT
+		 to1_to2             Set the To1 To2 timer of ONT
+		 show                show PON information
+	+eth                 ETH CLI menu
+		+debug               Ethernet Debug System CLI menu
+			 pack                Ethernet CLI debug function for pack driver
+			 brdg                Ethernet CLI debug function for SOC bridge
+			 phy                 Ethernet CLI debug function for PHY
+			 showconn            Show ethernet connection debug info
+			 ethdbg              enable/disable the eth debug flag
+		 show                Ethernet CLI Show
+	+voip                VoIP CLI menu (empty)
+	+omci                omci CLI menu
+		+debug               OMCI Debug System CLI menu
+			 showemrcfg          show the configuration of EMR from MEC
+			 crc                 enable the crc check of omci message
+			 omiterr             Enable/disable omitting OMCI errors
+			 acpower             Start or stop power shedding
+			 allocid             Function call mec_AddAllocId
+			 ponstate            Function call mec_HandlePonStateChange
+		+voip                OMCI VoIP System CLI menu
+			 show                show the configuration of VMR from MEC
+		+defaultxml          MEC Xml List CLI menu
+			 show                show the List of default Xml from MEC
+			 crc_commit          runtime xml add crc
+			 restore_xml         runtime xml restore
+		 show                Show the information of MEC
+		 clear               Clear the runtime data
+	+router              router CLI menu (empty)
+	+dmr                 DMR CLI menu (empty)
+	+hpna                HPNA CLI menu (empty)
++system              System CLI menu
+	+mib                 MIB CLI menu
+		+debug               MIB Debug System CLI menu
+		 dump                Dump current mib to a file
+		 reset               Reset mib to default values
+		 show                Show the content of mib tables
+	+log                 LOG CLI menu
+		+kernel              KERNEL LOG CLI menu (empty)
+		 show                Print out a log
+		 dump                dump the content of a log file
+		 set                 Save a log to a file
+		 clear               Clear a log
+		 collectlog          Collectlog all log
+	+env                 ENV CLI menu
+		 show                Print out enviroment variables
+	+misc                MISC CLI menu
+		+bob                 BOSA CLI menu
+			 eep                 Misc CLI Show
+			 unlock              Misc CLI Show
+			 echo                Misc CLI Show
+			 2090                Misc CLI Show
+			 preheat             Misc CLI Show
+			 auto                Misc CLI Show
+			 automod             Misc CLI Show
+			 restart             Misc CLI Show
+		+debug               Misc Debug System CLI menu
+			 showwc              Show write counter of mtd device
+			 showbad             Show bad blocks of mtd device
+		 show                Misc CLI Show
+		 rf                  Misc CLI Show
+		 filter              Misc CLI Show
+		 agc                 Misc CLI Show
+		 ponalarm            Misc CLI Show
+		 mpcode              Read or write eeprom : EEP_MFG_PRODUCTCODE
+		 mpsn                Read or write eeprom : EEP_MFG_PRODUCTSERIAL
+		 mhwv                Read or write eeprom : EEP_MFG_HWVERSION
+		 lasersn             Read or write eeprom : EEP_MFG_LASERSERIAL
+		 mac1                Read or write eeprom : EEP_MFG_MAC1
+		 mac2                Read or write eeprom : EEP_MFG_MAC2
+		 eepver              Read or write eeprom : EEP_MFG_EEPVER
+		 burnin              Read or write burnin flag : EEP_MFG_BURNIN
+		 rfthigh             Read or write rfthigh in unit of 64 ohm : EEP_MFG_RFT_HIGH
+		 rftlow              Read or write rftlow in unit of 64 ohm: EEP_MFG_RFT_LOW
+		 rithigh             Read or write rithigh in unit of 64 ohm : EEP_MFG_RIT_HIGH
+		 ritlow              Read or write ritlow in unit of 64 ohm: EEP_MFG_RIT_LOW
+		 major               Read or write eeprom : EEP_HW_FUNCTIONMAJOR
+		 minor               Read or write eeprom : EEP_HW_FUNCTIONMINOR
+		 hwver               Read or write eeprom : EEP_HW_VERSION
+		 vendor              Read or write eeprom : EEP_EQ_VENDORID
+		 eqsn                Read or write eeprom : EEP_EQ_SERIALNUMBER
+		 eqsnvend            Read or write eeprom : EEP_EQ_SNVENDOR
+		 eqvid               Read or write eeprom : EEP_EQ_VERSIONID
+		 eqid                Read or write eeprom : EEP_EQ_ID
+		 img_name            Read or write eeprom : EEP_SW_BOOTIMAGE
+		 admin_ip            Read or write eeprom : EEP_SW_IPADDR
+		 admin_mask          Read or write eeprom : EEP_SW_IPMASK
+		 server_ip           Read or write eeprom : EEP_SW_HOSTIPADDR
+		 admin_gw            Read or write eeprom : EEP_SW_GATEIPADDR
+		 ftp_user            Read or write eeprom : EEP_SW_FTPUSER
+		 ftp_passwd          Read or write eeprom : EEP_SW_FTPPASS
+		 bootflag            Read or write eeprom : EEP_SW_BOOTFLAG
+		 admin_en            Read or write eeprom : EEP_SW_BOOTREMOTEEN
+		 xgspon_regid        Read or write eeprom : XGS PON Registration ID
+		 test_en             Read or write eeprom : EEP_SW_BOOTTESTEN
+		 notcomplete         Read or write eeprom : EEP_SW_BOOTNOTCOMPLETE
+		 act_img             Read or write eeprom : EEP_SW_ACTIVEIMAGE
+		 commit_img          Read or write eeprom : EEP_SW_COMMITIMAGE
+		 pon_passwd          Read or write eeprom : EEP_APP_GPONPASSWORD
+		 register_id         Read or write eeprom : EEP_APP_GPONPASSWORD
+		 hwerr               Read or write eeprom : EEP_HW_DIAGNOSTICCODE
+		 vdsl2_vendor        Read or write eeprom : EEP_VDSL2_VENDORID
+		 ssh_en              Read or write eeprom : EEPROM_RW_CMD
+		 i2c_r               This command read i2c device in raw mode
+		 i2c_w               This command write i2c device in raw mode
+		 write_mem           This command is used to write otp
+		 read_mem            This command is used to read otp
+		 sendevent           This command is used to send led event directly
+		 testloaden          This command enable test load for manufacture
+		 testensn            This command enable test load for manufacture
+		 eep_reset           This command restore EEPROM factory default configuration
+		 eep_r8              This command read EEPROM in raw mode
+		 eep_w8              This command write EEPROM in raw mode
+		 eep_crc             This command update/check EEPROM crc value
+		 exeep_r8            This command read EEPROM in raw mode
+		 exeep_w8            This command write EEPROM in raw mode
+		 exeep_crc           This command update/check EEPROM crc value
+		 eepinfo             This command show eep info.
+		 clearcfg            This command is used to clear ONT runtime config , if full para is set, clear loid also!Usage: clearcfg [full]
+		 final_check         This command is used to show some important information for checking!
+		 led                 This command is used to only turn on green leds,red leds or off all leds!Usage: led gon/ron/off
+		 testloaden          This command enable test load for manufacture
+		 testensn            This command enable test load for manufacture
+		 get_gpio_val        This command get gpio value
+		 diswdt              This command disable for manufacture
+		 bosa                This command is used to set bosa version and type
+		 image_copy          This command copy one image to another at next boot time
+		 stopreboot          Stop reboot command for debug
+	+manu                Manufacture CLI menu
+		 we                  This command write eeprom for manufacture
+		 wep                 This command only write PC for manufacture
+		 wes                 This command only write SN for manufacture
+		 wem1                This command only write MAC1 for manufacture
+		 wem2                This command only write MAC2 for manufacture
+		 ledon               This command turn on all led
+		 ledoff              This command turn off all led
+		 final_check         This command do final check
+		 get_gpio_val        This command get gpio value
+		 trans               This command show transceiver info
+		 temp                This command show system temperature
+		 er                  This command enable rf
+		 dr                  This command diable rf
+		 ef                  This command enable filter
+		 df                  This command disable filter
+		 ten                 This command enable test load
+		 wd                  This command disable watchdog
+		 tensn               This command enable test load, special for BL olt
+		 ces_main            This command configure ces connection for main test board
+		 ces_back            This command configure ces connection for backup test board
+		 check_boot_status   This command check boot status
+		 check_ranging_statusThis command check ranging status
+		 check_usb_port      This command does manu test for USB device
+		 reset_button_test   This command is used for Reset Button test
+		 factory_reset       Clear all configuration and return to factory setting
+		 load_certfile       Load ACS HTTPS private Cert file into ONT
+	+fs                  File System CLI menu
+		 show                Show the content of system memory
+		 supgrade            super user Upgrade Image from Local Ftp Server
+		 flash               System Flash memory Operation command
+		 upgrade             Upgrade Image from Local Ftp Server
+		 check               check the content of system mtd
+	+net                 NET CLI menu
+		 mirror              Set mirror debug
+		 dump                Set dump frames debug
+		 log                 Open/Close driver debug log
+		 atconn              Active connection debug
+		 show                Show NetMgr Data
+	+shell               Shell
+	+debug               System Debug CLI menu
+		 showtimer           Show timers
+		 showtask            Show task state
+		 starttimer          Start timers
+		 stoptimer           Start timers
+		 md5                 calculate MD5 value from input string
+		 md5num              calculate MD5 number string from input string
+		 printlog            Set the log level to print to console
+	 ontver              Show ONT Software Version
+	 custom              Get/Set ONT Software custom information
\ No newline at end of file