diff options
Diffstat (limited to '')
| -rw-r--r-- | _ont/ont-nokia-g-010s-a.md | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/_ont/ont-nokia-g-010s-a.md b/_ont/ont-nokia-g-010s-a.md index 9a8b83a..ccae81f 100644 --- a/_ont/ont-nokia-g-010s-a.md +++ b/_ont/ont-nokia-g-010s-a.md @@ -57,13 +57,139 @@ The stick has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be a {% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %} +## List of partitions + +| dev | size | erasesize | name | +| ----- | -------- | --------- | ------------- | +| mtd0 | 00040000 | 00010000 | "uboot" | +| mtd1 | 00080000 | 00010000 | "uboot_env" | +| mtd2 | 00600000 | 00010000 | "linux" | +| mtd3 | 004d81b6 | 00010000 | "rootfs" | +| mtd4 | 000b0000 | 00010000 | "rootfs_data" | +| mtd5 | 00600000 | 00010000 | "image1" | +| mtd6 | 00100000 | 00010000 | "configfs" | +| mtd7 | 00210000 | 00010000 | "logfs" | +| mtd8 | 00010000 | 00010000 | "ri" | +| mtd9 | 00010000 | 00010000 | "sfp" | +| mtd10 | 00010000 | 00010000 | "ribackup" | + + # General Settings and Useful Commands + +## Getting and Setting S/N +To check the current serial number: +```sh +onu gtcsng +``` + +To set the current serial number: +```sh +ritool set MfrID ABCD +ritool set G984Serial 012345678 +``` + +## Getting and Setting PLOAM Password +To check the current password (the password field contains decimal values of ASCII characters): +```sh +onu gtccg +``` + +The value can be changed using the web interface. + + ## Disabling Dying Gasp ```sh uci set gpon.gtc.nDyingGaspEnable='0'; uci commit gpon ``` +## Rebooting the ONU +```sh +reboot +``` + +## Checking whether the connection with the OLT was successful (O5 state) + +```sh +onu ploamsg +``` + +## Transferring files to the stick + +{% include alert.html content="If you use a modern OpenSSH version (e.g. >= 8.8) you will have to use the legacy protocol and enable some deprecated algorithms: scp `-oKexAlgorithms=+diffie-hellman-group1-sha1 -oHostKeyAlgorithms=+ssh-dss [...]`" alert="Info" icon="svg-info" color="blue" %} + +```sh +# scp rootfs.bin root@192.168.1.10:/tmp/ +``` + +## Backup of all partition + +Make a backup of all partitions, an easy way is: +- On the stick run: +```sh +cat /proc/mtd +``` +- For each mtdX run in the lantiq shell: +```sh +cp /dev/mtdX /tmp +``` + +{% include alert.html content="If you use a modern OpenSSH version (e.g. >= 8.8) you will have to use the legacy protocol and enable some deprecated algorithms: `scp -oKexAlgorithms=+diffie-hellman-group1-sha1 -oHostKeyAlgorithms=+ssh-dss [...]`" alert="Info" icon="svg-info" color="blue" %} + +And in the computer shell: +```sh +scp ONTUSER@192.168.1.10:/tmp/mtdX ./ +``` + +## Checking the currently active image + +```sh +upgradestatus +``` + +## Flashing a new rootfs via SSH + +{% include alert.html content="Only the inactive image can be flashed" alert="Info" icon="svg-info" color="blue" %} + +The following commands are used to flash a new rootfs to image1 and then boot to it +```sh +mtd write /tmp/rootfs.bin image1 +update_env_flag 1 +reboot +``` + +## Getting/Setting Speed LAN Mode + +| Velue | Speed | +| ----- | ---------------------------------- | +| 4 | 1 Gbps / SGMII | +| 5 | 2.5 Gbps / HSGMII with auto-neg on | + +To enable the 2.5 Gbps / HSGMII with auto-neg on: + +```sh +fw_setenv sgmii_mode 5 +``` + +To remove the value (back to default): +```sh +fw_setenv sgmii_mode +``` + +To get the (H)SGMII Mode: + +```sh +onu lanpsg 0 +``` +The `link_status` variable tells the current speed + +## Querying a particular OMCI ME +```sh +omci_pipe.sh meg MIB_IDX ME_IN +``` +Where `MIB_IDX` is the MIB ID and the `ME_IN` is the ME instance number + + # HW Modding - [Nokia G-010S-A Pin 6 Iusse - Rsaxvc.net](https://rsaxvc.net/blog/2020/8/15/Nokia_G-010S-A_Pin_6_Issue.html) |