summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--_ont/ont-zyxel-pmg3000-d20b.md20
1 files changed, 19 insertions, 1 deletions
diff --git a/_ont/ont-zyxel-pmg3000-d20b.md b/_ont/ont-zyxel-pmg3000-d20b.md
index f5969d1..9da5ff9 100644
--- a/_ont/ont-zyxel-pmg3000-d20b.md
+++ b/_ont/ont-zyxel-pmg3000-d20b.md
@@ -131,6 +131,7 @@ exit
hal
set sn ALCLf0f0f0f0
```
+Do not worry if you're missing one of the two commands, the change is still applied with just one of them.
## Setting ONU GPON PLOAM password
{% include alert.html content="The PLOAM password is stored in the ASCII format." alert="Note" icon="svg-info" color="blue" %}
@@ -141,7 +142,7 @@ set password PLOAMPASS
```
## Setting OMCI software version (ME 7)
-Edit the /var/config/ont.sys via vi directly on the stick itself. The file is CRLF terminated, one entry per line.
+Edit `/var/config/ont.sys` via vi directly on the stick itself. The file is CRLF terminated, one entry per line.
The entries for the software version are:
```
SW_VER0:0xabcdef
@@ -155,6 +156,14 @@ manufactory
set hardware version 3FE49165BFAA01
```
+If the above command is missing you can edit `/var/config/ont.sys` via vi directly on the stick itself. The file is CRLF terminated, one entry per line.
+The entry for the hardware version is:
+```
+ONTG_VER:0x463630303556362e300000000000
+```
+
+The hardware version must be encoded in hex format and right padded to 28 characters with 0 (excluding the starting 0x) to avoid any spurious values.
+
## Setting OMCI equipment ID (ME 257)
{% include alert.html content="Model number must not be more than 20 characters long in total." alert="Note" icon="svg-info" color="blue" %}
```sh
@@ -165,6 +174,15 @@ omci
equipment id MYEQUIPMENTID
```
+If any of the above commands is missing you can edit `/var/config/ont.sys` via vi directly on the stick itself. The file is CRLF terminated, one entry per line.
+The entry for the equipment id is:
+```
+ONTG_EQID:0x463630303556362E30000000000000000000000
+```
+
+The equipment id must be encoded in hex format and right padded to 39 characters with 0 (excluding the starting 0x) to avoid any spurious values.
+
+
# Advanced settings
## Reset Web Gui admin credentials