diff options
-rw-r--r-- | _ont/ont-fs-com-gpon-onu-stick-with-mac.md | 2 | ||||
-rw-r--r-- | _ont/ont-fs-com-mod.md | 7 | ||||
-rw-r--r-- | _ont/ont-huawei-ma5671a-fs-mod.md | 193 |
3 files changed, 201 insertions, 1 deletions
diff --git a/_ont/ont-fs-com-gpon-onu-stick-with-mac.md b/_ont/ont-fs-com-gpon-onu-stick-with-mac.md index b75265f..931f27a 100644 --- a/_ont/ont-fs-com-gpon-onu-stick-with-mac.md +++ b/_ont/ont-fs-com-gpon-onu-stick-with-mac.md @@ -1,6 +1,6 @@ --- title: ONT FS.com GPON ONU Stick with MAC (GPON-ONU-34-20BI) -has_children: false +has_children: true alias: SourcePhotonics SPS-34-24T-HP-TDFO parent: ONT FS.com layout: default diff --git a/_ont/ont-fs-com-mod.md b/_ont/ont-fs-com-mod.md new file mode 100644 index 0000000..cda9de0 --- /dev/null +++ b/_ont/ont-fs-com-mod.md @@ -0,0 +1,7 @@ +--- +title: FS Modded Firmware for Huawei MA5671A and FS.com GPON-ONU-34-20BI +has_children: false +redirect_to: /ont-huawei-ma5671a-fs-mod +layout: default +parent: ONT FS.com GPON ONU Stick with MAC (GPON-ONU-34-20BI) +--- diff --git a/_ont/ont-huawei-ma5671a-fs-mod.md b/_ont/ont-huawei-ma5671a-fs-mod.md new file mode 100644 index 0000000..e81707a --- /dev/null +++ b/_ont/ont-huawei-ma5671a-fs-mod.md @@ -0,0 +1,193 @@ +--- +title: FS Modded Firmware for Huawei MA5671A and FS.com GPON-ONU-34-20BI +has_children: false +parent: Huawei MA5671A +layout: default +--- + +{% include alert.html content="The following wiki is only compatible with version 5 or later!" alert="Note" icon="svg-warning" color="red" %} + +# Flashing the firmware + +Flash the firmware image to image0 or image1 via [SSH](/ont-huawei-ma5671a/#flashing-a-new-rootfs-via-ssh) or via [TTL serial](/ont-huawei-ma5671a-ymodem) as usual. + +After the flash it is absolutely necessary to connect to the SFP via telnet using the IP 192.168.1.10: + +```sh +telnet 192.168.1.10 +``` + +Once connected via telnet to the SFP, execute the following commands, it will be necessary to wait a few minutes until the end of the automatic procedure: + +```sh +firstboot +reboot +``` + +Remember that with each flash of this firmware it is always necessary to perform the procedure described above, otherwise the SFP will not work! + +# Login info + +| | | +| ------------------ | ---------------------------------------------- | +| Username | root | +| Password | root | +| IP address | 192.168.1.10 | +| Telnet | Always available | +| TTL Serial | Always available | +| SSH | Only after the first configuration (firstboot) | +| Web | NO | + +# GPON ONU status + +## Get the operational status of the ONU +```sh +onu ploam_state_get +``` + +## Get optical laser status +```sh +otop -g s +``` + +## Get information of the OLT +```sh +omci_pipe.sh meg 131 0 +``` + +## Querying a particular OMCI ME +```sh +omci_pipe.sh meg MIB_IDX ME_IN +``` +Where `MIB_IDX` is the MIB ID and the `ME_IN` is the ME instance number + +## Get VLAN table rule +```sh +gtop -g "GPE VLAN rule" +``` + +## Get GEM port status table +```sh +gtop -g e +``` + +## Getting/Setting Speed LAN Mode + +To get the LAN Mode: + +```sh +onu lan_port_status_get 0 +``` +The `link_status` variable tells the current speed + +| Value (for `sgmii_mode` and `link_status`) | Speed | +| ------------------------------------------ | ---------------------------------- | +| 3 | 1 Gbps / SGMII with auto-neg on | +| 4 | 1 Gbps / SGMII with auto-neg off | +| 5 | 2.5 Gbps / HSGMII with auto-neg on | + +To change the default lan mode value you can use `fw_setenv sgmii_mode`. The firmware is already set to 2.5G auto-negotiation, you shouldn't touch it. + +# GPON/OMCI settings + +## Setting ONU GPON serial number +```sh +fw_setenv onu_serial "YOUR_SERIAL_ASCII" +``` + +## Setting ONU GPON ploam +```sh +fw_setenv onu_ploam "YOUR_PLOAM_ASCII" +``` + +## Setting ONU GPON loid +```sh +fw_setenv onu_loid "YOUR_LOID" +``` + +## Setting ONU GPON loid password +```sh +fw_setenv onu_loid "YOUR_LOID_PASSWORD" +``` + +## Setting OMCI vendor ID +```sh +fw_setenv omci_vendor_id "YOUR_VENDOR_ID" +``` + +## Setting OMCI equipment ID +```sh +fw_setenv omci_equip_id "YOUR_EQUIP_ID" +``` + +## Setting OMCI hardware ID +```sh +fw_setenv omci_hw_ver "YOUR_HW_VER" +``` + +## Setting OMCI software version +```sh +fw_setenv image0_version "YOUR_SW_VERSION_0" +fw_setenv image1_version "YOUR_SW_VERSION_1" +``` + +# Advanced settings + +{% include alert.html content="Normally they are not necessary and it would be better not to touch them" alert="Note" icon="svg-warning" color="red" %} + +## Setting custom mib file +You have to copy the MIB file to /etc/mibs and then run this command: + +```sh +fw_setenv mib_file_custom "YOUR_MIB_FILENAME" +``` + +## Setting management IP +```sh +fw_setenv ipaddr www.xxx.yyy.zzz +``` + +## Restore SFP to default config +```sh +firstboot +reboot +``` + +# SFP EEPROM settings + +{% include alert.html content="Normally they are not necessary and it would be better not to touch them" alert="Note" icon="svg-warning" color="red" %} + +## Setting SFP vendor name +```sh +fw_setenv sfp_vendor_name "YOUR_SFP_VENDOR_NAME" +``` + +## Setting SFP part name +```sh +fw_setenv sfp_part_name "YOUR_SFP_PART_NAME" +``` + +## Setting SFP vendor revision +```sh +fw_setenv sfp_vendor_rev "YOUR_SFP_VENDOR_REV" +``` + +## Setting SFP part serial +```sh +fw_setenv sfp_part_serial "YOUR_SFP_PART_SERIAL" +``` + +## Setting SFP manufacturing date code +```sh +fw_setenv sfp_date_code "YOUR_SFP_DATE_CODE" +``` + +## Setting SFP vendor data +```sh +fw_setenv sfp_vendor_data "YOUR_SFP_VENDOR_DATA" +``` + +# List of firmwares and files +- [6BA1896SPLQA42_MODDED_ver5.img](https://mega.nz/file/g9MTxAzR#qSU-OB6SlAVOE97ajSnEP--UcsvurPkpraJPgds3r6g){: .btn } md5hash: 63c02951d5c7ce5c83de54636368520f +- [6BA1896SPLQA42_MODDED_ver4.img](https://mega.nz/file/MgVWgBJS#L8N7kPZtSJ7FtbtxRcnxNF-W3b9wDbCeJ82YgnK7moQ){: .btn } md5hash: 63b0cc790c0087a5a1197c89b502b002 +- [6BA1896SPLQA42_MODDED_ver3.img](https://mega.nz/file/Np1gmQpI#CVUUHf3yayB9NB-2uI4MX3qCcEwMiLX6e5DqgJz4Kig){: .btn } md5hash: 90348ff0ccaad475cf14d9d0a056cf72 |