diff options
Diffstat (limited to '_ont/ont-fs-com-gpon-onu-stick-with-mac.md')
| -rw-r--r-- | _ont/ont-fs-com-gpon-onu-stick-with-mac.md | 37 |
1 files changed, 19 insertions, 18 deletions
diff --git a/_ont/ont-fs-com-gpon-onu-stick-with-mac.md b/_ont/ont-fs-com-gpon-onu-stick-with-mac.md index 966fbf1..8784290 100644 --- a/_ont/ont-fs-com-gpon-onu-stick-with-mac.md +++ b/_ont/ont-fs-com-gpon-onu-stick-with-mac.md @@ -63,7 +63,7 @@ Or: sfp_i2c -i8 -s "ABCD12345678" ``` -## Obtain S/N setted +## Checking whether the S/N has been correctly set ```sh fw_printenv | grep nSerial ``` @@ -73,7 +73,7 @@ sfp_i2c -g ``` ## Setting PLOAM Password -Software 6BA1896SPLQA41 and before (See [Carlito Firmware](/ont-huawei-ma5671a-carlito)) +Software 6BA1896SPLQA41 and earlier (See [Carlito Firmware](/ont-huawei-ma5671a-carlito)) ```sh fw_setenv nPassword "0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39" ``` @@ -84,7 +84,7 @@ sfp_i2c -i11 -s "0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39" ``` ## Setting LOID and Checkcode Password -Software 6BA1896SPLQA41 and before (See [Carlito Firmware](/ont-huawei-ma5671a-carlito)) +Software 6BA1896SPLQA41 and earlier (See [Carlito Firmware](/ont-huawei-ma5671a-carlito)) ```sh fw_setenv omci_loid 1234567890 fw_setenv omci_lpwd password01 @@ -96,23 +96,23 @@ sfp_i2c -i9 -s "1234567890" sfp_i2c -i10 -s "password01" ``` -## Setting eqipment id (ME 257) +## Setting Eqipment ID (ME 257) ```sh sfp_i2c -i6 -s "YOUR_EQUIPMENT_ID" ``` -## Setting vendor id (ME 256) +## Setting Vendor ID (ME 256) ```sh sfp_i2c -i7 -s "YOUR_VENDOR_ID" ``` -## Change ONU hardware version (ME 256) +## Changing ONU hardware version (ME 256) ```sh cp /etc/mibs/data_1g_8q.ini /etc/mibs/data_1g_8q.ini.bak sed 's/256 0 HWTC 0000000000000/256 0 YOUR_VENDOR_ID YOUR_ONU_VERSION/' -i /etc/mibs/data_1g_8q.ini ``` -## Enable `data_1g_8q_us1280_ds512.ini` OMCI MIB file for 2500 Mbps profiles +## Enabling `data_1g_8q_us1280_ds512.ini` OMCI MIB file for 2500 Mbps profiles {% include alert.html content="The patch below is only compatible with the firmware version `6BA1896SPLQA42`" alert="Info" icon="svg-info" color="blue" %} {% include alert.html content="If you need to set the ONU version remember that you will have to do it using the MIB file `/etc/mibs/data_1g_8q_us1280_ds512.ini` instead of `/etc/mibs/data_1g_8q.ini`" alert="Info" icon="svg-info" color="blue" %} @@ -121,7 +121,7 @@ The MIB file `data_1g_8q_us1280_ds512.ini` is very useful to avoid performance p fw_setenv mib_file data_1g_8q_us1280_ds512.ini ``` -## Use custom OMCI MIB file +## Using custom OMCI MIB file {% include alert.html content="If you need to set the ONU version remember that you will have to do it using your custom MIB file instead of `/etc/mibs/data_1g_8q.ini`" alert="Info" icon="svg-info" color="blue" %} You have to copy the MIB file to /etc/mibs and then run this command: @@ -129,7 +129,7 @@ You have to copy the MIB file to /etc/mibs and then run this command: fw_setenv mib_file YOUR_MIB_FILENAME ``` -## Change image software version (ME 7) +## Changing image software version (ME 7) {% include alert.html content="The patch below is only compatible with the firmware version `6BA1896SPLQA42`" alert="Info" icon="svg-info" color="blue" %} The image version normally couldn't be changed because it was hard-coded into the `/opt/lantiq/bin/omcid` binary, @@ -167,12 +167,13 @@ cd /opt/lantiq/bin cp omcid omcid.original ``` -And finally to copy via SCP the modified `omcid` binary in the `/opt/lantiq/bin/omcid` path. -Before restarting the stick and applying changes, make sure omcid has execution bit set. +Now you have to use SCP to copy the modified `omcid` binary in `/opt/lantiq/bin/omcid`. +Before restarting the stick and applying changes, make sure `omcid` has its execution bit set, then reboot the stick and change the image version with the following command: ```sh chmod ugo+x /opt/lantiq/bin/omcid -``` +>>>>>>> main + Is also a good time to set the image0/image1_version. Crash has reported if they are not set correctly before reboot. ```sh @@ -197,33 +198,33 @@ fw_setenv ipaddr 192.168.20.60 fw_setenv gatewayip 192.168.20.1 ``` -## Read all EEPROM +## Reading all EEPROM ```sh sfp_i2c -r ``` -## Get Firmware version +## Getting Firmware version ```sh strings /opt/lantiq/bin/omcid | grep ^software_Version | awk -F[=,] '{print $2}' ``` -## Get Firmware build time +## Getting Firmware build time ```sh strings /opt/lantiq/bin/omcid | grep compiled ``` -## Setting Onu reboot +## Rebooting the ONU ```sh reboot ``` -## Reinitialize the EEPROM without rebooting +## Reinitializing the EEPROM without rebooting {% include alert.html content="This will cause you to disconnect from the current ssh session." alert="Warning" icon="svg-warning" color="yellow" %} ```sh reload_i2c.sh ``` -## Reset EEPROM to default values and reinitialize +## Resetting EEPROM to default values and reinitializing {% include alert.html content="This command is not reversible, all the EEPROM data will be restored to the factory values!" alert="Warning" icon="svg-warning" color="red" %} {% include alert.html content="This will cause you to disconnect from the current ssh session." alert="Warning" icon="svg-warning" color="yellow" %} ```sh |