diff options
Diffstat (limited to '_ont/ont-genexis-ft-g2110c.md')
| -rw-r--r-- | _ont/ont-genexis-ft-g2110c.md | 45 |
1 files changed, 25 insertions, 20 deletions
diff --git a/_ont/ont-genexis-ft-g2110c.md b/_ont/ont-genexis-ft-g2110c.md index 5f49cf1..7c62398 100644 --- a/_ont/ont-genexis-ft-g2110c.md +++ b/_ont/ont-genexis-ft-g2110c.md @@ -7,22 +7,24 @@ parent: Genexis # Hardware Specifications -| | | -| ----------- | ------------------------------------------------------------ | -| Vendor | Genexis | -| Model | FiberTwist G2110C-2.5G | -| Chipset | RTL9601D | -| Flash | 128MB | -| RAM | 32MB | -| System | Linux 3.18 (Luna SDK 3.3) | -| 2.5GBaseT | Yes | -| Optics | SC/APC | -| IP address | 192.168.100.1/24 or 192.168.1.1/24 | -| Web Gui | Can be enabled, locked down by iptables rule and missing CSS | -| Telnet | ✅ user `company`, password `amyM77yY` | -| Form Factor | ONT | - -# External/Internal Photo +| | | +| --------------- | ------------------------------------------------------------ | +| Vendor/Brand | Genexis FiberTwist | +| Model | G2110C-2.5G | +| Chipset | Realtek RTL9601D | +| Flash | 128MB | +| RAM | 32MB | +| System | Linux 3.18 (Luna SDK 3.3) | +| 2.5GBaseT | Yes | +| Optics | SC/APC | +| IP address | 192.168.100.1/24 or 192.168.1.1/24 | +| Web Gui | Can be enabled, locked down by iptables rule and missing CSS | +| SSH | | +| Telnet | ✅ user `company`, password `amyM77yY` | +| Serial | ✅ | +| Serial baud | 115200 | +| Serial encoding | 8-N-1 | +| Form Factor | ONT | {% include image.html file="ft-g2110c-front.jpg" alt="FiberTwist G2110C-2.5G Front" caption="FiberTwist G2110C-2.5G Front" %} @@ -35,9 +37,14 @@ parent: Genexis {% include image.html file="ft-g2110c-optical-header-3.jpg" alt="FiberTwist G2110C-2.5G Optical Header installation backplate" caption="FiberTwist G2110C-2.5G Optical Header installation backplate" %} -## Internal (TTL is on CM3 header) +## Serial + +The ONT has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface. To accept TX line commands, the GND of the TTL adapter should be attached to the ONT's shield: + {% include image.html file="ft-g2110c-internal.jpg" alt="FiberTwist G2110C-2.5G Internal" caption="FiberTwist G2110C-2.5G Internal" %} +{% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %} + ## List of software versions - C-5.6.1-R - C-5.7.0-R @@ -67,9 +74,7 @@ This ONT supports dual boot. `k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and the firmware of the second one -## List of firmwares and files - -# Useful Commands +# General Settings and Useful Commands {% include alert.html content="Some variables are write-protected, you need to unlock them before proceed" alert="Info" icon="svg-info" color="blue" %} |