diff options
Diffstat (limited to '_ont/ont-huawei-ma5671a-rooted.md')
| -rw-r--r-- | _ont/ont-huawei-ma5671a-rooted.md | 38 |
1 files changed, 31 insertions, 7 deletions
diff --git a/_ont/ont-huawei-ma5671a-rooted.md b/_ont/ont-huawei-ma5671a-rooted.md index 95d579e..019610a 100644 --- a/_ont/ont-huawei-ma5671a-rooted.md +++ b/_ont/ont-huawei-ma5671a-rooted.md @@ -31,6 +31,7 @@ layout: default 1. Type `:wq` 1. Run: + ```shell fw_setenv sfp_a2_info ($cat /tmp/sfp_a2.txt) ``` @@ -39,11 +40,11 @@ fw_setenv sfp_a2_info ($cat /tmp/sfp_a2.txt) 1. Save `sfp_a2_info` in a temporary file -```shell +```sh fw_printenv sfp_a2_info | sed "s/^sfp_a2_info=//" > /tmp/sfp_a2.txt ``` And print a pretty version: -```shell +```sh fw_printenv sfp_a2_info | sed "s/^sfp_a2_info=//" | tr '@' '\n' ``` @@ -77,7 +78,7 @@ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAASFcC2r7vAAAAAAAAAAAAAAAAAAAA 5. Transfer the modified file back into variable `sfp_a2_info` -```shell +```sh fw_setenv sfp_a2_info $(cat /tmp/sfp_a2.txt) ``` @@ -85,7 +86,7 @@ fw_setenv sfp_a2_info $(cat /tmp/sfp_a2.txt) After rebooting, check whether the new variables have been saved correctly: -```shell +```sh fw_printenv nPassword fw_printenv gSerial fw_printenv ethaddr @@ -93,16 +94,39 @@ fw_printenv ethaddr ## Checking whether the connection with the OLT was successful (O5 state) -```shell +```sh onu ploamsg ``` -# Disabling dying gasp +## Disabling dying gasp -```shell +```sh fw_setenv nDyingGaspEnable 0 ``` +## Getting/Setting Speed LAN Mode + +To get the LAN Mode: + +```sh +onu lanpsg 0 +``` +The `link_status` variable tells the current speed + +| Value (for `sgmii_mode` and `link_status`) | Speed | +| ------------------------------------------ | ---------------------------------- | +| 3 | 1 Gbps / SGMII with auto-neg on | +| 4 | 1 Gbps / SGMII with auto-neg off | +| 5 | 2.5 Gbps / HSGMII with auto-neg on | + +To change the default lan mode value you can use `fw_setenv sgmii_mode`. The firmware already has the value 5 by default and it is generally not necessary to change it. + +## Querying a particular OMCI ME +```sh +omci_pipe.sh meg MIB_IDX ME_IN +``` +Where `MIB_IDX` is the MIB ID and the `ME_IN` is the ME instance number + # Miscellaneous Links - [Edit sfp_a2_info file](https://forum.openwrt.org/t/support-ma5671a-sfp-gpon/48042/25) |