diff options
Diffstat (limited to '')
| -rw-r--r-- | _ont/ont-nokia-g-010g-q.md | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/_ont/ont-nokia-g-010g-q.md b/_ont/ont-nokia-g-010g-q.md index 0c6e078..47e13c5 100644 --- a/_ont/ont-nokia-g-010g-q.md +++ b/_ont/ont-nokia-g-010g-q.md @@ -40,7 +40,7 @@ parent: Nokia | mtd2 | 00700000 | 00010000 | "ImageA" | | mtd3 | 00700000 | 00010000 | "ImageB" | -This ont seems to support dual boot (notice partitions "ImageA" and "ImageB"), however this has not been tested. +This ONT seems to support dual boot (notice partitions "ImageA" and "ImageB"), however this has not been tested. ## List of firmwares and files # Serial @@ -52,7 +52,7 @@ You can easily communicate with the ONT using a TTL converter (for example the C {% include alert.html content="The ONT's serial logic is 3V3." alert="Warning" icon="svg-warning" color="red" %} -Make sure the logic of your TTL converter is 3V3 too otherwise you might damage the ONT, in my case I wasn't sure the CH341A had a 3V3 logic for the TTL part so I set up a voltage divider made of 2 resistors between the TX pin and ground as shown in the image below. +Make sure the logic of your TTL converter is 3V3 too otherwise you might damage the ONT, in my case I wasn't sure whether the CH341A programmer used 3V3 logic for the TTL part so I set up a voltage divider made of 2 resistors between the TX pin and ground as shown in the image below. *Also make sure that your TTL converter RX pin voltage threshold is less than (or equal to) 3V3* |