diff options
Diffstat (limited to '_ont/ont-nokia-g-010s-a.md')
| -rw-r--r-- | _ont/ont-nokia-g-010s-a.md | 32 |
1 files changed, 16 insertions, 16 deletions
diff --git a/_ont/ont-nokia-g-010s-a.md b/_ont/ont-nokia-g-010s-a.md index 13920d7..bc31a84 100644 --- a/_ont/ont-nokia-g-010s-a.md +++ b/_ont/ont-nokia-g-010s-a.md @@ -35,7 +35,7 @@ parent: Nokia ## Modifying firmware -The Nokia G-010S-A can be flashed with the [Nokia G-010S-P](/ont-nokia-g-010s-p) firmware, provided the MTD layout has been changed beforehand to match the new one. For the full procedure, see the post on [lafibre.info](https://lafibre.info/remplacer-livebox/guide-de-connexion-fibre-directement-sur-un-routeur-voire-meme-en-2gbps/msg870551/#msg870551) +The Nokia G-010S-A can be flashed with the [Nokia G-010S-P](/ont-nokia-g-010s-p) firmware, provided the MTD layout has been changed beforehand to match the new one. For the full procedure, see this post on [lafibre.info](https://lafibre.info/remplacer-livebox/guide-de-connexion-fibre-directement-sur-un-routeur-voire-meme-en-2gbps/msg870551/#msg870551) ## List of software versions @@ -87,7 +87,7 @@ See more info on: [Firmwares G-010S-A](https://github.com/hwti/G-010S-A#firmware # Usage -## Enable serial +## Enabling serial ```sh fw_setenv bootdelay 5 @@ -97,13 +97,13 @@ fw_setenv preboot # GPON ONU status -## Get the operational status of the ONU +## Getting the operational status of the ONU ```sh onu ploamsg ``` -## Get information of the OLT vendor +## Getting information on the OLT vendor ```sh omci_pipe.sh meg 131 0 @@ -114,7 +114,7 @@ omci_pipe.sh meg 131 0 ```sh omci_pipe.sh meg MIB_IDX ME_IN ``` -Where `MIB_IDX` is the MIB ID and the `ME_IN` is the ME instance number +Where `MIB_IDX` is the MIB ID and `ME_IN` is the ME instance number ## Getting/Setting Speed LAN Mode @@ -123,13 +123,13 @@ Where `MIB_IDX` is the MIB ID and the `ME_IN` is the ME instance number | 4 | 1 Gbps / SGMII | | 5 | 2.5 Gbps / HSGMII with auto-neg on | -To enable the 2.5 Gbps / HSGMII with auto-neg on: +To enable the interface to sync at 2.5 Gbps speeds / using HSGMII with auto-neg on: ```sh fw_setenv sgmii_mode 5 ``` -To remove the value (back to default): +To revert the change back to default: ```sh fw_setenv sgmii_mode ``` @@ -143,8 +143,8 @@ The `link_status` variable tells the current speed # GPON/OMCI settings -## Enable parameters modification -This setting must be inserted in order to performs the others parameters modification +## Enabling parameter modification +This setting must be set in order to perform other parameter modifications ```sh ritool set OperatorID 0000 ``` @@ -168,11 +168,11 @@ To check the current password (the password field contains decimal values of ASC onu gtccg ``` -The value can be changed using the web interface. +This value can be changed using the web interface. ## Getting/Setting OMCI software version (ME 7) -Software verion must be changed by directly modifing firmware by using the patches which can be found in GitHub page of [Nokia G-010-A](https://github.com/hwti/G-010S-A) and adding a folder `0001_swversion` that contins a file `patch.sh`: +The software version must be changed by directly modifying firmware by using the patches found in the wiki's page about the [Nokia G-010-A](https://github.com/hwti/G-010S-A) ONT and then adding a folder `0001_swversion` that contins a file `patch.sh` with the following content: ``` #!/bin/sh @@ -183,7 +183,7 @@ ROOTFS=$1 echo "Changing to software version desidered" sed -i s/3FE46398BGCB22/3FE45655BOCK99/g "$ROOTFS/usr/etc/buildinfo" ``` -Where `3FE46398BGCB22` is the current software version and `3FE45655BOCK99` the software version desidered +Where `3FE46398BGCB22` is the current software version and `3FE45655BOCK99` the desired software version ## Getting/Setting OMCI hardware version (ME 256) @@ -194,7 +194,7 @@ ritool set ICS 01 ## Getting/Setting OMCI equipment ID (ME 257) -This ONT is designed to save nokia equipment ID, specifically to put the equipment ID of a Nokia G-010G-Q we need: +This ONT is designed to save Nokia's equipment ID, specifically to set the equipment ID of a Nokia G-010G-Q the following commands are to be used: ```sh ritool set CleiCode __________ @@ -214,12 +214,12 @@ Where `CleiCode` is the prefix and `Mnemonic` the postfix. ## Backup of all partition -Make a backup of all partitions, an easy way is: +Make a backup of all partitions, an easy way is to run these commands: - On the stick run: ```sh cat /proc/mtd ``` -- For each mtdX run in the lantiq shell: +- For each mtdX run this command in the lantiq shell: ```sh cp /dev/mtdX /tmp ``` @@ -255,7 +255,7 @@ ifconfig eth0:1 192.168.1.10 netmask 255.255.255.0 {% include alert.html content="It is recommended to enable serial access via TTL" alert="Info" icon="svg-info" color="blue" %} -The following commands are used to flash a new rootfs to image1 and then boot to it +The following commands are used to flash a new rootfs to image1 and then boot to it: ```sh mtd write /tmp/rootfs.bin image1 update_env_flag 1 |