diff options
Diffstat (limited to '_ont/ont-sercomm-fg1000b-11.md')
-rw-r--r-- | _ont/ont-sercomm-fg1000b-11.md | 71 |
1 files changed, 71 insertions, 0 deletions
diff --git a/_ont/ont-sercomm-fg1000b-11.md b/_ont/ont-sercomm-fg1000b-11.md new file mode 100644 index 0000000..b3c2a5f --- /dev/null +++ b/_ont/ont-sercomm-fg1000b-11.md @@ -0,0 +1,71 @@ +--- +title: Sercomm FG1000B.11 +has_children: false +layout: default +parent: Sercomm +--- + +# Hardware Specifications + +| | | +| --------------- | ---------------------- | +| Vendor/Brand | Sercomm | +| Model | FG1000B.11 | +| ODM | ✅ | +| Chipset | BCM68360_B1 | +| Flash | NAND 128 MB | +| RAM | 256 MB | +| CPU | Broadcom B53 Dual Core | +| CPU Clock | 1500MHz | +| Bootloader | CFE | +| Load addr | 0x80000 | +| 2.5GBaseT | Yes | +| PHY Ethernet | RTL8221B | +| Optics | SC/APC | +| IP address | 192.168.100.1/24 | +| Web Gui | ✅, no login needed | +| SSH | No | +| Telnet | No | +| Serial | No | +| Serial baud | 115200 | +| Serial encoding | 8-N-1 | +| Form Factor | ONT | + + +{% include image.html file="fg1000b-11_rear.jpg" alt="Sercomm FG1000B.11" caption="Sercomm FG1000B.11 rear" %} +{% include image.html file="fg1000b-11_bottom.jpg" alt="Sercomm FG1000B.11 bottom" caption="Sercomm FG1000B.11 bottom" %} +{% include image.html file="fg1000b-11_side1.jpg" alt="Sercomm FG1000B.11 side 1" caption="Sercomm FG1000B.11 side 1" %} +{% include image.html file="fg1000b-11_side2.jpg" alt="Sercomm FG1000B.11 side 2" caption="Sercomm FG1000B.11 side 2" %} + +## Serial + +See picture side2 for the pin identification, use 112500 8-N-1 +The ONT seems only to display output of the ROM CFE and flash CFE, but don't allow interupting the boot... + +{% include serial_dump.html file="fg1000b-11_boot_cfe.txt" alt="Sercomm FG1000B.11 CFE boot dump" title="Sercomm FG1000B.11 CFE boot dump" %} + +## List of software versions + +Current only version seen is: 090144.1.0.001 + +# GPON/OMCI settings +## Getting/Setting ONU GPON PLOAM password + +PLOAM can be set directly for Text or Hexa(without 0x) via Web interface if <10 digit otherwise POST call to URL allow > 10 digits for example 20 digit hex can be setup via: + +``` +curl -i -s -k -X $'POST' -H $'Content-Type: application/x-www-form-urlencoded' \ + -d $'ploam_password=00000XXXXXXXXXXXXXXX' \ + $'http://192.168.100.1/ONT/client/data/Router.json' +``` + +# Miscellaneous Links + +- [FG1000B.11 - lafibre.info](https://lafibre.info/remplacer-bbox/test-glasfaser-modem-2-telekom-pour-remplacement-ont-2-5gbe-synchro-ok-ipv4-ok/) + +# Other brand names + + - 1&1 Glasfaser Modem + - Telekom Glasfaser Modem 2 + + |