diff options
Diffstat (limited to '_ont/ont-technicolor-afm0002.md')
| -rw-r--r-- | _ont/ont-technicolor-afm0002.md | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/_ont/ont-technicolor-afm0002.md b/_ont/ont-technicolor-afm0002.md index e540d1d..813b9de 100644 --- a/_ont/ont-technicolor-afm0002.md +++ b/_ont/ont-technicolor-afm0002.md @@ -37,7 +37,7 @@ Configuration: asc0=0 115200 8-N-1 - AFM0002WND (IP address: 169.0.0.1) {% include alert.html content="The version used to obtain the info shown on this page is the AFM0002TIM" alert="Info" icon="svg-info" color="blue" %} -{% include alert.html content="The AFM0002FWB can be transformed into AFM0002TIM. The AFM0002FWB has an older software version." alert="Warning" icon="svg-warning" color="red" %} +{% include alert.html content="The AFM0002FWB can be transformed into AFM0002TIM. Usually AFM0002FWBs have older software." alert="Warning" icon="svg-warning" color="red" %} # List of software versions @@ -69,18 +69,18 @@ Configuration: asc0=0 115200 8-N-1 This stick supports dual boot. -`k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and the firmware of the second one +`k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and firmware of the second one # List of firmwares and files ## Useful files - `/var/config/lastgood.xml` - Contains the user portion of the configuration -- `/var/config/lastgood-hs.xml` - Contains the "hardware" configuration (i.e. that _should_ not be changed) +- `/var/config/lastgood-hs.xml` - Contains the "hardware" configuration (which _should not_ be changed) - `/tmp/omcilog` - OMCI messages logs (must be enabeled, see below) ## Useful binaries -- `/etc/scripts/flash` - Used to manipulate the config files in a samewhat safe manner -- `xmlconfig` - Used to low-level manipulate the XML config files. Called by `flash` -- `nv` - Used to manipulate the nvram storage, including persistent config entries via `nv setenv`/`nv getenv` +- `/etc/scripts/flash` - Used to manipulate the config files in a somewhat safe manner +- `xmlconfig` - Used for low-level manipulation of the XML config files. Called by `flash` +- `nv` - Used to manipulate nvram storage, including persistent config entries via `nv setenv`/`nv getenv` - `omcicli` - Used to interact with the running OMCI daemon - `omci_app` - The OMCI daemon - `diag` - Used to run low-level diagnostics commands on the stick @@ -132,7 +132,7 @@ sw_version1=V1_7_8_210412 # Low Level Modding -{% include alert.html content="This section is based on `V1_7_8_210412` firmware version of the stick" alert="Info" icon="svg-info" color="blue" %} +{% include alert.html content="This section is based on the `V1_7_8_210412` version of the stick's firmware " alert="Info" icon="svg-info" color="blue" %} ## Transfering files from/to the stick @@ -161,14 +161,14 @@ From the PC to the stick So mtd4/5 if you are on image1, mtd6/7 if you are on image0. -The follwing examples flashes a new rootfs to image1 and boots to it +The following commands are used to flash a new rootfs to image1 and then boot to it ```sh # flash_eraseall /dev/mtd7 # cat /tmp/rootfs.new > /dev/mtd7 # nv setenv sw_commit=1 # reboot ``` -## Adding support to configurable SW and HW versions, VENDOR ID and much more +## Adding support to configurable SW and HW versions, Vendor ID and much more `/etc/scripts/flash` can be flashed in order to add support for some variables implemented in `omci_app` but removed from `xmlconfig`. The patch is below (change the values to suit your needs) ```patch --- squashfs-root/etc/scripts/flash 2021-09-28 10:38:52.000000000 +0200 @@ -222,7 +222,7 @@ For reference, the patch changes the follwing section of the omci_app: -00408cf0 24 05 00 0f li a1,0xe +00408cf0 24 05 00 0f li a1,0xf ``` -(It's inside the function referecing the string `OMCI_SW_VER1`) +(It's inside the function referencing the string `OMCI_SW_VER1`) The original file md5sum is: `4aea2f72bacc11256b7e2c1583d2ad4f` The patched file md5sum is: `da20327c4c002e4c27f82f6ee63dbc1a` @@ -234,8 +234,8 @@ reboot /bin/omcicli set logfile 1 ffffffff ``` 1. The binary log will be placed inside: `/tmp/omcilog` -2. You can convert it into .pcap using [omcilog2pcap](https://github.com/ADeltaX/omcilog2pcap) -3. You can then open it with Wireshark by installing the OMCI plugin from [wireshark](https://wiki.wireshark.org/Contrib.md) +2. You can convert it into a .pcap file using [omcilog2pcap](https://github.com/ADeltaX/omcilog2pcap) +3. You can then open it with Wireshark by installing the OMCI plugin from [Wireshark](https://wiki.wireshark.org/Contrib.md) If you want to log everything since the stick boots, you can create a custom rootfs. Place the last command inside `etc/runomci.sh` as the last line of the file |