diff options
Diffstat (limited to '_ont/ont-technicolor-afm0003.md')
| -rw-r--r-- | _ont/ont-technicolor-afm0003.md | 53 |
1 files changed, 38 insertions, 15 deletions
diff --git a/_ont/ont-technicolor-afm0003.md b/_ont/ont-technicolor-afm0003.md index 30eedea..9fc88c7 100644 --- a/_ont/ont-technicolor-afm0003.md +++ b/_ont/ont-technicolor-afm0003.md @@ -70,27 +70,50 @@ This stick supports dual boot. `k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and firmware of the second one -# List of firmwares and files -## Useful files -- `/var/config/lastgood.xml` - Contains the user portion of the configuration -- `/var/config/lastgood-hs.xml` - Contains the "hardware" configuration (which _should not_ be changed) -- `/tmp/omcilog` - OMCI messages logs (must be enabeled, see below) - -## Useful binaries -- `/etc/scripts/flash` - Used to manipulate the config files in a somewhat safe manner -- `xmlconfig` - Used for low-level manipulation of the XML config files. Called by `flash` -- `nv` - Used to manipulate nvram storage, including persistent config entries via `nv setenv`/`nv getenv` -- `omcicli` - Used to interact with the running OMCI daemon -- `omci_app` - The OMCI daemon -- `diag` - Used to run low-level diagnostics commands on the stick - -{% include_relative luna-sdk-userful-commands.md flash='/etc/scripts/flash' ploam='ascii' %} +{% include_relative ont-luna-sdk-useful-commands.md flash='/etc/scripts/flash' ploam='ascii' speedLan='12345' customSpeedLanAlert='The defualt firmware does not allow modification of the `LAN_SDS_MODE` parameter. Is it necessary to use the modded firmware. Before editing the speed make sure your hardware supports it.' lastgoodHs=true %} ## Enabling the Web UI ```sh # /bin/iptables -D INPUT -p tcp --dport 80 -j DROP ``` +## Transfering files from/to the stick +Works with binary files too, just run md5sum on source and destination to make sure you are not corrupting anything... +From the stick to the PC: +```sh +# tftp <IP> +tftp> put <filename> <directory> +tftp> q +``` +From the PC to the stick: +```sh +# tftp <IP> +tftp> get <filename> +tftp> q +``` + +## Extracting and repacking the rootfs +{% include alert.html content="Make sure you run both commands as root, otherwise you might get a damaged rootfs image" alert="Warning" icon="svg-warning" color="red" %} + +```sh +# unsquashfs mtd5.bin +# mksquashfs squashfs-root rootfs -b 131072 -comp lzma -no-recovery +``` +## Flashing a new rootfs + +{% include alert.html content="Only the inactive image can be flashed, change sw_versionX and sw_commit X based on the bank you have flashed" alert="Info" icon="svg-info" color="blue" %} + +So mtd4/5 if you are on image1, mtd6/7 if you are on image0. + +The following commands are used to flash a new rootfs to image1 and then boot to it +```sh +# flash_eraseall /dev/mtd7 +# cat /tmp/rootfs.new > /dev/mtd7 +# nv setenv sw_version1 NEW_SOFTWARE_VERSION +# nv setenv sw_commit 1 +# reboot +``` + # Miscellaneous Links - [omcilog2pcap](https://github.com/hack-gpon/omcilog2pcap) |