summaryrefslogtreecommitdiffstats
path: root/_ont_xgs/ont-nokia-xs-010x-q.md
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--_ont_xgs/ont-nokia-xs-010x-q.md116
1 files changed, 106 insertions, 10 deletions
diff --git a/_ont_xgs/ont-nokia-xs-010x-q.md b/_ont_xgs/ont-nokia-xs-010x-q.md
index d7a9e40..d2dd9dd 100644
--- a/_ont_xgs/ont-nokia-xs-010x-q.md
+++ b/_ont_xgs/ont-nokia-xs-010x-q.md
@@ -12,17 +12,113 @@ parent: Nokia
| Vendor | Nokia |
| Model | XS-010X-Q |
| ODM | CIG |
-| ODM Product Code | XG-99C |
-| Chipset | |
-| Manufacter | |
-| Flash | |
-| RAM | |
-| System | |
+| ODM Product Code | XG-99YF |
+| Chipset | Cortina CA8271A |
+| Manufacter | CIG |
+| Flash | 128MB |
+| RAM | 128MB |
+| System | Custom Linux by Cortina (Saturn SDK) based on Kernel 4.4 |
| 10GBaseT | Yes |
-| Optics | |
+| Optics | SC/APC |
| IP address | 192.168.100.1 |
| Web Gui | ✅ Port 80 user: `admin`, password: `1234` |
-| SSH | No |
-| Telnet | ✅ Port 23 user: `admin`, password: `1234` |
-| Serial | |
+| SSH | ✅ (see Enable SSH) |
+| Telnet | ✅ Port 23 user: `admin`, password: `1234` (see Telnet Full Shell) |
+| Serial | ✅ |
+| Serial baud | 115200 |
+| Serial encoding | 8-N-1 |
| Form Factor | ONT |
+
+
+# External/Internal Photo
+
+{% include image.html file="ont-nokia_xs-010x-q_front.jpg" alt="Nokia XS-010X-Q Front" caption="Nokia XS-010X-Q Front" %}
+
+{% include image.html file="ont-nokia_xs-010x-q_rear.jpg" alt="Nokia XS-010X-Q Rear" caption="Nokia XS-010X-Q Rear" %}
+
+{% include image.html file="ont-nokia_xs-010x-q_internal_1.jpg" alt="Nokia XS-010X-Q Internal 1" caption="Nokia XS-010X-Q Internal 1" %}
+
+{% include image.html file="ont-nokia_xs-010x-q_internal_2.jpg" alt="Nokia XS-010X-Q Internal 2" caption="Nokia XS-010X-Q Internal 2" %}
+
+## Serial
+
+The ONT has a TTL 3.3v UART console (configured as 115200 8-N-1) that can be accessed from the top surface. It's on the top left (with Ethernet\Power\Optical port faced down) of the board. TX, RX and ground pads need to be connected to a USB2TTL adapter supporting a logic level of 3.3V.
+
+{% include image.html file="ont-nokia_xs-010x-q_ttl.jpg" alt="Nokia XS-010X-Q TTL Pads" caption="Nokia XS-010X-Q TTL Pads" %}
+
+{% include alert.html content="Some USB TTL adapters label TX and RX pins the other way around: try to swap them if the connection doesn't work." alert="Note" icon="svg-warning" color="yellow" %}
+
+## List of software versions
+- 3FE49337AOCK80 - (R4.4.17.063 CIG 25/06/2021)
+
+## List of partitions
+
+| dev | size | erasesize | name |
+| ----- | -------- | --------- | --------------- |
+| mtd0 | 00040000 | 00020000 | "ssb" |
+| mtd1 | 00100000 | 00020000 | "uboot-env" |
+| mtd2 | 00100000 | 00020000 | "dtb0" |
+| mtd3 | 00600000 | 00020000 | "kernel0" |
+| mtd4 | 02800000 | 00020000 | "rootfs0" |
+| mtd5 | 00100000 | 00020000 | "dtb1" |
+| mtd6 | 00600000 | 00020000 | "kernel1" |
+| mtd7 | 02800000 | 00020000 | "rootfs1" |
+| mtd8 | 01400000 | 00020000 | "userdata" |
+| mtd9 | 00100000 | 00020000 | "mfginfo1" |
+| mtd10 | 00100000 | 00020000 | "mfginfo2" |
+| mtd11 | 00001000 | 00001000 | "uboot-env2" |
+| mtd12 | 00b09000 | 0001f000 | "squashfs_ubi" |
+| mtd13 | 01078000 | 0001f000 | "userdata" |
+| mtd14 | 00b09000 | 0001f000 | "squashfs_ubi" |
+
+This ONT supports dual boot.
+
+`kernel0` and `rootfs0` respectively contain the kernel and firmware of the first image, `kernel1` and `rootfs1` the kernel and the firmware of the second one
+
+{% include_relative ont-nokia-use.md %}
+
+{% include_relative ont-nokia-useful-command.md %}
+
+## Enable SSH (not persistent)
+
+Port 22 is filtered by default and the SSH daemon can be only enabled in runtime. Here is the procedure but it's not persisten accross reboot:
+
+Access UART with `ONTUSER`
+
+Enter `system\misc`
+
+Set `ssh_en` to `1` with the command:
+```sh
+#ONT>system
+#ONT/system>misc
+#ONT/system/misc>ssh_en set 1
+---ATECMDRESULT--- OK
+```
+
+Go back to `system`, then `shell` and run this command:
+```sh
+#ONT/system/misc>exit
+#ONT/system>shell
+#ONT/system/shell>iptables -F
+```
+## Enable Telnet Full Shell
+
+When you're using default credentials to access telnet (`admin`\\`1234`), the prompt is limited to `GponSLID` shell that permits only to modify or display the `PLOAM`
+If you change the `admin_mask` to `255.255.255.255`, default credentials stop to work but you can logon with `ONTUSER` and generated password to have full shell like UART
+
+Here is the procedure to change `admin_mask`:
+
+Access UART with `ONTUSER`
+
+Enter `system\misc`
+
+Set `admin_mask` to `255.255.255.255` with the command:
+```sh
+#ONT>system
+#ONT/system>misc
+#ONT/system/misc>admin_mask set 255.255.255.255
+normal load eep datat
+---ATECMDRESULT--- OK
+```
+
+Now reboot the ONT and you can access telnet with `ONTUSER` and full power :)