diff options
Diffstat (limited to '_router_pon/free_iliad_box_pop.md')
-rw-r--r-- | _router_pon/free_iliad_box_pop.md | 14 |
1 files changed, 8 insertions, 6 deletions
diff --git a/_router_pon/free_iliad_box_pop.md b/_router_pon/free_iliad_box_pop.md index 0a900e6..fbc6d0e 100644 --- a/_router_pon/free_iliad_box_pop.md +++ b/_router_pon/free_iliad_box_pop.md @@ -13,17 +13,17 @@ parent: Free/Iliad | Model | | | ODM | | | ODM Product Code | | -| Chipset | | -| Flash | | -| RAM | | -| CPU | BCM63153 | +| Chipset | BCM63153 | +| Flash | KLM4G1FETE-B041 (4GB eMMC 5.1) | +| RAM | 2x NT5CC128M16JR-EK (512MB DDR3L-1866) | +| CPU | | | CPU Clock | | | Bootloader | | | System | | | Load addr | | | HSGMII | | | 2.5GBaseX | | -| 2.5GBaseT | Yes | +| 2.5GBaseT | Yes (AQR112R PHY) | | XGMII/XSGMII | | | 10GBaseX | | | 10GBaseT | No | @@ -38,9 +38,11 @@ parent: Free/Iliad | Serial encoding | 8-N-1 | | Form Factor | ONT | + + ## Serial -The serial port is routed through the USB-C port used for power (which is PD compliant, tested with a notebook power supply). The pins are SBU1 and SBU2, reversal is handled using an open drain buffer (SN74LVC2G07) so a pull-up resistor on RX is needed. On the power daughter board TP7 is TX and TP8 is RX. +The serial port is routed through the USB-C port used for power (which is PD compliant, tested with a notebook power supply). The pins are SBU1 and SBU2, reversal is handled using an open drain buffer (SN74LVC2G07) so a pull-up resistor on RX is needed. On the power daughter board TP7 is TX and TP8 is RX. There is also a USB differential pair routed through the USB-C connector but there is no use for it yet. At the moment nothing more than a boot log is available. [^bcm61650hack] [^freeboxhack] ## Firmware is interchangeable with |