diff options
Diffstat (limited to '_router_pon/free_iliad_box_pop.md')
| -rw-r--r-- | _router_pon/free_iliad_box_pop.md | 67 |
1 files changed, 6 insertions, 61 deletions
diff --git a/_router_pon/free_iliad_box_pop.md b/_router_pon/free_iliad_box_pop.md index 9ac6e2b..72133e0 100644 --- a/_router_pon/free_iliad_box_pop.md +++ b/_router_pon/free_iliad_box_pop.md @@ -41,67 +41,12 @@ parent: Free/Iliad The serial port is routed through the USB-C port used for power (which is PD compliant, tested with a notebook power supply). The pins are SBU1 and SBU2, reversal is handled using an open drain buffer (SN74LVC2G07) so a pull-up resistor on RX is needed. On the power daughter board TP7 is TX and TP8 is RX. There is also a USB differential pair routed through the USB-C connector but there is no use for it yet. At the moment nothing more than a boot log is available. [^bcm61650hack] [^freeboxhack] -## Firmware is interchangeable with - -## List of software versions - -## List of partitions - -# Userful files and binaries - -## Useful files - -## Useful binaries - -# GPON ONU status - -## Get the operational status of the ONU - -## Get information of the OLT vendor - -## Querying a particular OMCI ME - -## Getting/Setting Speed LAN Mode - -# GPON/OMCI settings - -## Getting/Setting ONU GPON Serial Number - -## Getting/Setting ONU GPON PLOAM password - -## Getting/Setting ONU GPON LOID and LOID password - -## Getting/Setting OMCI software version (ME 7) - -## Getting/Setting OMCI hardware version (ME 256) - -## Getting/Setting OMCI vendor ID (ME 256) - -## Getting/Setting OMCI equipment ID (ME 257) - -# Advanced settings - -## Setting management MAC - -## Setting management IP - -## Rebooting the ONU - -## Creating a new rootfs - -## Flashing a new rootfs - -# SFP EEPROM settings - -## Reading all EEPROM - -# EEPROM (I2C slave simulated EEPROM) - -## EEPROM0 layout - -## EEPROM1 layout - -# Known Bugs +## SFP Whitelist +- WTD RTXM166-401-C13 (EPON w/o MAC) +- WTD RTXM166-401-C11 (EPON w/o MAC) +- Hisense LTF7215-BH+ (EPON w/o MAC) +- [Technicolor AFM0003](/ont-technicolor-afm0003) (GPON with MAC) +- SFP Copper 10Gtek (1 and 10 Gbps) # Miscellaneous Links |