summaryrefslogtreecommitdiffstats
path: root/ont-ODI-DFP-34X-C2C.md
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--ont-ODI-DFP-34X-C2C.md112
1 files changed, 104 insertions, 8 deletions
diff --git a/ont-ODI-DFP-34X-C2C.md b/ont-ODI-DFP-34X-C2C.md
index 060e59b..74730da 100644
--- a/ont-ODI-DFP-34X-C2C.md
+++ b/ont-ODI-DFP-34X-C2C.md
@@ -10,18 +10,23 @@ parent: ONT
| ----------- | ---------------- |
| Vendor | ODI |
| Model | DFP-34X-C2C |
-| Alias | |
| Chipset | Realtek RTL9601D |
| Flash | 8 MB |
| RAM | 64 MB |
| System | Linux (Luna SDK) |
| HSGMII | Yes |
| Optics | SC/APC |
-| IP address | |
-| Web Gui | ✅ |
-| SSH | ✅ |
+| IP address | 192.168.1.1 |
+| Web Gui | ✅ admin/admin |
+| SSH | ✅ admin/admin |
| Form Factor | miniONT SFP |
+**Note:** SSH uses an outdated set of algorithm/ciphers, you can connect using the following command:
+
+```shell
+ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oCiphers=+3des-cbc admin@192.168.1.1
+```
+
{% include image.html file="odi.jpg" alt="ODI DFP-34X-C2C" caption="ODI DFP-34X-C2C" %}
@@ -35,14 +40,105 @@ parent: ONT
- [CarlitoxxPro CPGOS03-0490 v2](ont-CarlitoxxPro-CPGOS03-0490-v2)
## List of software versions
+- V1.0-220530 Modded by [stich86](https://github.com/stich86) **SUGGESTED** since it has working VLAN translation. Download link: [github.com](https://github.com/Anime4000/RTL960x/files/8821809/M114_sfp_ODI_hybrid_220527_stich86_220530.tar.zip)
+- V1.0-220414
+- V1.0-220304
+
## List of partitions
-## List of firmwares and files
+
+| dev | size | erasesize | name |
+| ----- | -------- | --------- | --------------- |
+| mtd0 | 00040000 | 00001000 | "boot" |
+| mtd1 | 00002000 | 00001000 | "env" |
+| mtd2 | 00002000 | 00001000 | "env2" |
+| mtd3 | 0003c000 | 00001000 | "config" |
+| mtd4 | 0014c000 | 00001000 | "k0" |
+| mtd5 | 00274000 | 00001000 | "r0" |
+| mtd6 | 0014c000 | 00001000 | "k1" |
+| mtd7 | 00274000 | 00001000 | "r1" |
+| mtd8 | 00001000 | 00001000 | "Partition_008" |
+| mtd9 | 00001000 | 00001000 | "Partition_009" |
+| mtd10 | 00001000 | 00001000 | "Partition_010" |
+| mtd11 | 00001000 | 00001000 | "Partition_011" |
+| mtd12 | 0014c000 | 00001000 | "linux" |
+| mtd13 | 00274000 | 00001000 | "rootfs" |
-# Known Bugs
+This stick supports dual boot.
+
+`k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and the firmware of the second one
+
+# Useful Commands
+
+## Getting/Setting the ONT's S/N
+```sh
+# flash get GPON_SN
+GPON_SN=TMBB00000000
+# flash set GPON_SN TMBB0A1B2C3D
+```
+
+## Getting/Setting the ONT's PLOAM password
+
+{% include alert.html content="The PLOAM password is stored in HEX format, with no 0x or separator" %}
+
+```sh
+# flash get GPON_PLOAM_PASSWD
+GPON_PLOAM_PASSWD=41414141414141414141
+# flash set GPON_PLOAM_PASSWD 41414141414141414141
+```
-VLAN swap issue (MEID 171), auto-sensing mode to switch between SGMII/HiSGMII
+## Getting/Setting the ONT Vendor ID
+**Note:** this may need OMCI_OLT_MODE set to 3 to work
+```sh
+# flash get PON_VENDOR_ID
+PON_VENDOR_ID=ZTEG
+# flash set PON_VENDOR_ID HWTC
+```
+
+## Getting/Settng the ONT Custom software version
+**Note:** this needs OMCI_OLT_MODE set to 3 and firmware 220530 modded by stich86
+
+```sh
+# nv setenv sw_custom_version0 YOURFIRSTSWVER
+# nv setenv sw_custom_version1 YOURSECONDSWVER
+```
+
+## Getting/Setting a custom HW Version
+**Note:** this probably needs OMCI_OLT_MODE set to 3
+
+```sh
+# flash get HW_HWVER
+HW_HWVER=V2.0
+# flash set HW_HWVER MYHWVERSION
+```
+
+## Getting/Setting a custom ONT Equipment ID
+**Note:** this probably needs OMCI_OLT_MODE set to 3
+```sh
+# flash get GPON_ONU_MODEL
+GPON_ONU_MODEL=DFP-34X-2C2
+# flash set GPON_ONU_MODEL DFP-34X-XXX
+```
+
+## Checking the currently active image
+```sh
+# nv getenv sw_active
+sw_active=1
+```
+
+## Booting to a different image
+```sh
+# nv setenv sw_commit 0|1
+# reboot
+```
+
+## Querying a particular OMCI ME
+```sh
+# omcicli mib get MIB_IDX
+```
+
+# Known Bugs
-You should use the VID/VLAN shown by executing the command "omcicli mib get 84" via telnet to bring up PPPoE
+- Auto-sensing mode to switch between SGMII/HiSGMII
# Miscellaneous Links