From fa26076da5ea50097baa966af86ecbfe625b0228 Mon Sep 17 00:00:00 2001 From: Simone Bortolin Date: Sat, 27 Aug 2022 09:47:20 +0200 Subject: some update on serial and files --- _ont/ont-carlitoxxpro-cpgos03-0490-v2.md | 7 ++--- _ont/ont-huawei-ma5671a-root.md | 14 ++++----- _ont/ont-huawei-ma5671a.md | 14 ++++----- _ont/ont-nokia-g-010g-q.md | 1 + _ont/ont-nokia-g-010s-a.md | 16 +++++----- _ont/ont-nokia-g-010s-b.md | 15 ++++----- _ont/ont-odi-realtek-dfp-34x-2c2.md | 38 ++++++++++++++--------- _ont/ont-odi-zte-dfp-34x-2c2.md | 5 ++- assets/img/ont-odi-realtek-dfp-34x-2c2/ttl-2.jpg | Bin 0 -> 632679 bytes 9 files changed, 62 insertions(+), 48 deletions(-) create mode 100644 assets/img/ont-odi-realtek-dfp-34x-2c2/ttl-2.jpg diff --git a/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md b/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md index daacb51..3137589 100644 --- a/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md +++ b/_ont/ont-carlitoxxpro-cpgos03-0490-v2.md @@ -21,15 +21,12 @@ layout: default | SSH | ✅ | | Form Factor | miniONT SFP | -## List of software versions -## List of partitions -## List of firmwares and files # Known Bugs -VLAN swap issue (MEID 171), auto-sensing mode to switch between SGMII/HiSGMII +- VLAN swap issue (MEID 171), auto-sensing mode to switch between SGMII/HiSGMII -You should use the VID/VLAN shown by executing the command "omcicli mib get 84" via telnet to bring up PPPoE +- You should use the VID/VLAN shown by executing the command "omcicli mib get 84" via telnet to bring up PPPoE # Miscellaneous Links diff --git a/_ont/ont-huawei-ma5671a-root.md b/_ont/ont-huawei-ma5671a-root.md index 38ee822..8f86503 100644 --- a/_ont/ont-huawei-ma5671a-root.md +++ b/_ont/ont-huawei-ma5671a-root.md @@ -7,13 +7,12 @@ layout: default 1. take the SFP molex and the 4 coloured cables and solder them to the molex according to the following diagram: -``` -USB TTL(UART) Adapter ------- SFP 20pins Molex connector -3.3V ---red ------------------pin #15 and #16 -TX -----orange ---------------pin #2 -RX -----yellow ---------------pin #7 -GND ----green --------------- pin #10 -``` +| USB TTL(UART) Adapter | wire colour in picture | SFP 20pins Molex connector | +| --------------------- | ---------------------- | -------------------------- | +| 3.3V | red | pin #15 and #16 | +| TX | orange | pin #2 | +| RX | yellow | pin #7 | +| GND | green | pin #10 | {% include alert.html content="Use GND wire as ON/OFF switch, otherwise there will be a slight delay before data is displayed on the console (putty/TeraTerm)." alert="Important" icon="svg-warning" color="yellow" %} @@ -121,4 +120,5 @@ mtd -e image1 write mtd5.bin image1 - [Support MA5671A SFP GPON](https://forum.openwrt.org/t/support-ma5671a-sfp-gpon/48042) - [La fibre Orange à 2Gbps, sur un routeur MikroTik 10Gbps CCR2004, via un ONT SFP+](https://lafibre.info/remplacer-livebox/guide-de-connexion-fibre-directement-sur-un-routeur-voire-meme-en-2gbps/msg832904/#msg832904) - [Bypassing the HH3K up to 2.5Gbps using a BCM57810S NIC](https://www.dslreports.com/forum/r32230041-Internet-Bypassing-the-HH3K-up-to-2-5Gbps-using-a-BCM57810S-NIC) +- [Bypassing the HH3K up to 2.5Gbps using a BCM57810S NIC](https://www.dslreports.com/forum/r32230041-Internet-Bypassing-the-HH3K-up-to-2-5Gbps-using-a-BCM57810S-NIC) diff --git a/_ont/ont-huawei-ma5671a.md b/_ont/ont-huawei-ma5671a.md index 5029394..4344a55 100644 --- a/_ont/ont-huawei-ma5671a.md +++ b/_ont/ont-huawei-ma5671a.md @@ -35,13 +35,13 @@ layout: default ## Serial -``` -USB TTL(UART) Adapter ------- SFP 20pins Molex connector -3.3V ---red ------------------pin #15 and #16 -TX -----orange ---------------pin #2 -RX -----yellow ---------------pin #7 -GND ----green --------------- pin #10 -``` +| USB TTL(UART) Adapter | SFP 20pins Molex connector | +| --------------------- | -------------------------- | +| 3.3V | pin #15 and #16 | +| TX | pin #2 | +| RX | pin #7 | +| GND | pin #10 | + Configuration: asc0=0 115200 8-N-1 ## Root procedure diff --git a/_ont/ont-nokia-g-010g-q.md b/_ont/ont-nokia-g-010g-q.md index 7eec744..720cf10 100644 --- a/_ont/ont-nokia-g-010g-q.md +++ b/_ont/ont-nokia-g-010g-q.md @@ -43,6 +43,7 @@ This ont seems to support dual boot (notice partitions "ImageA" and "ImageB"), h ## List of firmwares and files # Serial + {% include image.html file="g-010g-q-serial-pinout.jpg" alt="G-010G-Q " caption="G-010G-Q: serial pinout" %} You can easily communicate with the ONT using a TTL converter (for example the CH341A programmer in TTL mode) by connecting the converters' pins to the ONT following the pinout shown in the image above diff --git a/_ont/ont-nokia-g-010s-a.md b/_ont/ont-nokia-g-010s-a.md index 04edfa7..4a2a544 100644 --- a/_ont/ont-nokia-g-010s-a.md +++ b/_ont/ont-nokia-g-010s-a.md @@ -38,13 +38,13 @@ Turning a [Nokia G-010S-P](/ont-nokia-g-010s-p) into a [Nokia G-010S-A](/ont-nok ## Serial -``` -USB TTL(UART) Adapter ------- SFP 20pins Molex connector -3.3V ---red ------------------pin #15 and #16 -TX -----orange ---------------pin #3 -RX -----yellow ---------------pin #6 -GND ----green --------------- pin #10 -``` +| USB TTL(UART) Adapter | SFP 20pins Molex connector | +| --------------------- | -------------------------- | +| 3.3V | pin #15 and #16 | +| TX | pin #3 | +| RX | pin #6 | +| GND | pin #10 | + Configuration: asc0=0 115200 8-N-1 ## Disabling Dying Gasp @@ -61,4 +61,6 @@ uci set gpon.gtc.nDyingGaspEnable='0'; uci commit gpon # Miscellaneous Links - [G-010S-A](https://github.com/hwti/G-010S-A) +- [Usage GPON module SFP in Spain](https://forum.mikrotik.com/viewtopic.php?t=116364&start=300) +- [Bypassing the HH3K up to 2.5Gbps using a BCM57810S NIC](https://www.dslreports.com/forum/r32230041-Internet-Bypassing-the-HH3K-up-to-2-5Gbps-using-a-BCM57810S-NIC) diff --git a/_ont/ont-nokia-g-010s-b.md b/_ont/ont-nokia-g-010s-b.md index 55379f9..5ab6f23 100644 --- a/_ont/ont-nokia-g-010s-b.md +++ b/_ont/ont-nokia-g-010s-b.md @@ -49,13 +49,13 @@ layout: default ## Serial -``` -USB TTL(UART) Adapter ------- SFP 20pins Molex connector -3.3V ---red ------------------pin #15 and #16 -TX -----orange ---------------pin #3 -RX -----yellow ---------------pin #6 -GND ----green --------------- pin #10 -``` +| USB TTL(UART) Adapter | SFP 20pins Molex connector | +| --------------------- | -------------------------- | +| 3.3V | pin #15 and #16 | +| TX | pin #2 | +| RX | pin #7 | +| GND | pin #10 | + Configuration: asc0=0 115200 8-N-1 ## Disabling Dying Gasp @@ -73,4 +73,5 @@ uci set gpon.gtc.nDyingGaspEnable='0'; uci commit gpon - [G-010S-A](https://github.com/hwti/G-010S-A) - [Usage GPON module SFP in Spain](https://forum.mikrotik.com/viewtopic.php?t=116364&start=300) +- [Bypassing the HH3K up to 2.5Gbps using a BCM57810S NIC](https://www.dslreports.com/forum/r32230041-Internet-Bypassing-the-HH3K-up-to-2-5Gbps-using-a-BCM57810S-NIC) diff --git a/_ont/ont-odi-realtek-dfp-34x-2c2.md b/_ont/ont-odi-realtek-dfp-34x-2c2.md index 6c6645f..185656b 100644 --- a/_ont/ont-odi-realtek-dfp-34x-2c2.md +++ b/_ont/ont-odi-realtek-dfp-34x-2c2.md @@ -1,5 +1,6 @@ --- -title: ODI Realtek DFP-34X-C2C (XPON) +title: ODI Realtek DFP-34X-C2C +description: New model 2022 has_children: false layout: default --- @@ -31,10 +32,14 @@ ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oCiphers=+3des-cbc admin@192.16 ## List of software versions -- V1.0-220530 Modded by [stich86](https://github.com/stich86) **SUGGESTED** since it has working VLAN translation. Download link: [github.com](https://github.com/Anime4000/RTL960x/files/8821809/M114_sfp_ODI_hybrid_220527_stich86_220530.tar.zip) +- V1.0-220530 - V1.0-220414 - V1.0-220304 +## List of firmwares and files +- [V1.0-220530 Modded](https://github.com/Anime4000/RTL960x/files/8821809/M114_sfp_ODI_hybrid_220527_stich86_220530.tar.zip){: .btn } + by [stich86](https://github.com/stich86) **SUGGESTED** since it has working VLAN translation. + ## List of partitions | dev | size | erasesize | name | @@ -58,6 +63,22 @@ This stick supports dual boot. `k0` and `r0` respectively contain the kernel and firmware of the first image, `k1` and `r1` the kernel and the firmware of the second one +# Serial + +The stick has exposed TTL pads: + +{% include image.html file="ont-odi-realtek-dfp-34x-2c2/ttl.jpg" alt="DFP-34X-2C2 TTL Connection" caption="DFP-34X-2C2 TTL Connection" %} +{% include image.html file="ont-odi-realtek-dfp-34x-2c2/ttl-2.jpg" alt="DFP-34X-2C2 TTL Pin" caption="DFP-34X-2C2 TTL Pin" %} + +| USB TTL(UART) Adapter | wire colour in picture | SFP 20pins Molex connector and TTL pinout | +| --------------------- | ---------------------- | ----------------------------------------- | +| 3.3V | blue | pin #15 and #16 | +| TX | purple | TX | +| RX | white | RX | +| GND | green | pin #10 | + +Configuration: asc0=0 115200 8-N-1 + # Useful Commands ## Getting/Setting the ONT's S/N @@ -136,22 +157,11 @@ sw_active=1 # Low level modding -## TTL connection - -The stick has exposed TTL pads: - -{% include image.html file="ont-odi-realtek-dfp-34x-2c2/ttl.jpg" alt="DFP-34X-2C2 TTL Connection" caption="DFP-34X-2C2 TTL Connection" %} - -- TX is on the left (purple lead); -- RX on the right (white lead); -- VCC (+3.3V) is SFP pin 15 or 16; -- GND is on SFP pin 10; - -The serial port uses 115200 baud 8N1 # Miscellaneous Links - [Hacking RTL960x](https://github.com/Anime4000/RTL960x) - [Ditch ONU, use GPON SFP on Business Grade Router, Mikrotik/Ubiquiti/pfSense (Home Networking)](https://forum.lowyat.net/topic/4925452) +- [For the new model ODI ZTE DFP-34X-C2C](/ont-odi-zte-dfp-34x-2c2) diff --git a/_ont/ont-odi-zte-dfp-34x-2c2.md b/_ont/ont-odi-zte-dfp-34x-2c2.md index 65f5642..c070029 100644 --- a/_ont/ont-odi-zte-dfp-34x-2c2.md +++ b/_ont/ont-odi-zte-dfp-34x-2c2.md @@ -1,7 +1,9 @@ --- -title: ODI ZTE DFP-34X-C2C (GPON) +title: ODI ZTE DFP-34X-C2C +description: Old model 2020 has_children: false layout: default +nav_exclude: true --- # Hardware Specifications @@ -32,3 +34,4 @@ layout: default - [GPON module Dfp-34g-2c2 sfp](https://forum.openwrt.org/t/gpon-module-dfp-34g-2c2-sfp/51641) - [Ditch ONU, use GPON SFP on Business Grade Router, Mikrotik/Ubiquiti/pfSense (Home Networking)](https://forum.lowyat.net/topic/4925452) - [Usage GPON module SFP in Spain](https://forum.mikrotik.com/viewtopic.php?t=116364&start=300) +- [For the new model ODI Realtek DFP-34X-C2C](/ont-odi-realtek-dfp-34x-2c2) diff --git a/assets/img/ont-odi-realtek-dfp-34x-2c2/ttl-2.jpg b/assets/img/ont-odi-realtek-dfp-34x-2c2/ttl-2.jpg new file mode 100644 index 0000000..57812f8 Binary files /dev/null and b/assets/img/ont-odi-realtek-dfp-34x-2c2/ttl-2.jpg differ -- cgit v1.2.3